In computer graphics, clipmapping is a method of clipping a mipmap to a subset of data pertinent to the geometry being displayed. This is useful for loading as little data as possible when memory is limited, such as on a graphics processing unit. The technique is used for LODing in NVIDIA’s implementation of voxel cone tracing. The high-resolution levels of the mipmapped scene representation are clipped to a region near the camera, while lower resolution levels are clipped further away. == MegaTexture == MegaTexture is a clipmap implementation developed by id Software. It was introduced in their id Tech 4 engine and also appeared in id Tech 5 and id Tech 6 before being removed in id Tech 7. MegaTexture is a texture allocation technique that uses a single, extremely large texture rather than repeating multiple smaller textures. It is also featured in Splash Damage's game Enemy Territory: Quake Wars, and was developed by id Software former technical director John Carmack. MegaTexture employs a single large texture space for static terrain. The texture is stored on removable media or a computer's hard drive and streamed as needed, allowing large amounts of detail and variation over a large area with comparatively little RAM usage. Depending on the pixel resolution per square meter, covering a large area could require several gigabytes of memory. However, RAM is also filled by the rest of the game and the underlying operating system, limiting the amount available for texturing. As the player moves around the game, different sections of the MegaTexture are loaded into memory. They are then scaled to the correct size and applied to the 3D models of the terrain. Id has presented a more advanced technique that builds upon the MegaTexture idea and virtualizes both the geometry and the textures to obtain unique geometry down to the equivalent of the texel: the sparse voxel octree (SVO). It works by raycasting the geometry represented by voxels (instead of triangles) stored in an octree. The goal is to stream parts of the octree into video memory, going further down along the tree for nearby objects to give them more details, and to use higher level, larger voxels for farther objects, which give an automatic level of detail (LOD) system for both geometry and textures at the same time. The geometric detail that can be obtained using this method is nearly infinite, which removes the need for faking 3-dimensional details with techniques such as normal mapping. Despite that most voxel rendering tests use very large amounts of memory (up to several GB), Jon Olick of id Software claimed the technology is able to compress such SVO to 1.15 bits per voxel of position data. == Virtual texturing == Unlike clipmaps, which clip each mip level around a viewpoint-dependent clipcenter and therefore work best for terrain, virtual texturing preprocesses texture data into equally sized tiles that can be streamed for arbitrary textured geometry. Rage, powered by the id Tech 5 engine, uses a more advanced technique called virtual texturing. Textures can measure up to 128000×128000 pixels and are also used for in-game models and sprites, etc. and not just the terrain. Wolfenstein: The New Order and the 2016 version of Doom also use these. Carmageddon: Reincarnation also uses virtual texturing, though unlike id's virtual texturing system, which is designed for unique texture-mapping everywhere, their system is designed to use storage space sparingly while still offering good blend of texture variation and resolution.
Hekaton (database)
Hekaton (also known as SQL Server In-Memory OLTP) is an in-memory database for OLTP workloads built into Microsoft SQL Server. Hekaton was designed in collaboration with Microsoft Research and was released in SQL Server 2014. Traditional RDBMS systems were designed when memory resources were expensive, and were optimized for disk storage. Hekaton is instead optimized for a working set stored entirely in main memory, but is still accessible via T-SQL like normal tables. It is fundamentally different from the "DBCC PINTABLE" feature in earlier SQL Server versions. Hekaton was announced at the Professional Association for SQL Server (PASS) conference 2012.
Signatures with efficient protocols
Signatures with efficient protocols are a form of digital signature invented by Jan Camenisch and Anna Lysyanskaya in 2001. In addition to being secure digital signatures, they need to allow for the efficient implementation of two protocols: A protocol for computing a digital signature in a secure two-party computation protocol. A protocol for proving knowledge of a digital signature in a zero-knowledge protocol. In applications, the first protocol allows a signer to possess the signing key to issue a signature to a user (the signature owner) without learning all the messages being signed or the complete signature. The second protocol allows the signature owner to prove that he has a signature on many messages without revealing the signature and only a (possibly) empty subset of the messages. The combination of these two protocols allows for the implementation of digital credential and ecash protocols.
TRAME
TRAME (TRAnsmission of MEssages) was the name of the second computer network in the world similar to the internet to be used in an electric utility. Like the internet, the base technology was packet switching; it was developed by the electric utility ENHER in Barcelona. It was deployed by the same utility, first in Catalonia and Aragón, Spain, and later in other places. Its development started in 1974 and the first routers, called nodes at that time, were deployed by 1978. The network was in operation until 2016 (38 years) with successive technological software and hardware updates. == Beginnings == In 1974, packet switching was a technology known only in research circles. The concept began in 1968 in association with the United States' Advanced Research Projects Agency (ARPA) research project ARPANET. The idea of applying the packet switching concept to electric utilities control communication networks first appeared in 1974 when the Swedish power utility Vattenfall started to create its TIDAS packet-switching network and was followed by the Spanish electric utility ENHER, which aimed to telecontrol and automate its high-voltage power grid. For this purpose, ENHER created a specific team of people to develop both the packet-switching network and the supervisory control and data acquisition (SCADA) system, also called the telecontrol system. By 1978 the first four TRAME routers were available and by 1980, eight of them were deployed and operating. The printed circuit boards (PCBs) controlling the communication lines were connected to a shared memory PCB allowing them to exchange data and messages. The project was developed together with its main initial application, the Telecontrol or SCADA system SICL (Sistema Integral de Control Local) with which initially they shared a very similar hardware. The maximum link capacity was 9600 bit/s, which in 1980 was the maximum possible on a 4 kHz wide voice channel at the time. These channels were the basic unit of the then-analog communication systems in use. By that time power utilities used either telephone calls or low speed (below 1200bit/s) dedicated links for telecontrol, typically shared among ten high-voltage electrical substations. == Services == The basic service provided by the TRAME network was SCADA or Telecontrol to automate the high-voltage power grid, thus improving operational efficiency, which was until then operated manually with telephone communication between human operators. Each TRAME router was associated with one or more remote terminal units (RTUs) of the SICL telecontrol system. It also had connected screens, and later PCs, located in electrical substations to interchange messages between them and with the Control Center located in the well-known Casa Fuster in Barcelona. It was a kind of predecessor to today's e-mail. Later, in the 1990s, other protocols (X.25, IP) were developed to include corporate information technology (IT) terminals, company physical surveillance systems and other services. Additionally, applications and terminals were developed for the transmission of voice and video over the TRAME network. == Protocols == The TRAME routing system, like that of the original ARPANET, was based on the Bellman-Ford algorithm but with "split-horizon" as in the Swedish TIDAS network, but with an original improvement. This protocol allows optimal paths to be found in meshed networks for each packet to be transmitted, allowing the shared use of the same network by multiple services. In contrast, traditional circuit-switched technology used to establish dedicated circuits for each service or communication. The addressing of routers and terminals used a proprietary system with a 16-bit address; it would be the equivalent of the well-known IP (Internet Protocol) version 4 (IPv4), still in use on the internet today, which uses 32-bit addresses. It is necessary to take into account that in 1978, the IPv4 protocol did not yet exist since the IPv4 version used on the internet did not appear until 1981, and in fact, did not reach the general public until much later. The line protocols were also proprietary and were called UCL (Unidad de Control de Línea, 'line control unit'), which linked the routers together, and UTR (Unión TRAME-Remotas), the access protocol. They were designed to offer the highest quality of service required by the telecontrol/SCADA function in terms of data integrity and availability set by the International Electrotechnical Commission (IEC) IEC-870-5-1 and ANSI C37.1. standards, and because the protocol used at the time in corporate computer networks, HDLC (high-level data link control), did not offer enough quality for critical industrial applications. Later on, other protocols like X.25 and IP were also made compatible with the aforementioned TRAME protocols. In 2000, the UTR protocol was replaced by the international standard IEC 60870- 5-101/104. Initially network flow control was based on the management of eight data priorities in head-of-the-line (HOL) waiting queues. Later and after some experimentation, a flow control method based on a bit indicating route congestion and management of the gap between packets when accessing the network was adopted. This required measuring the capacity of the route bottleneck. An end-to-end protocol was also added for some flows requiring order preservation like X.25. == Evolution == To last for 38 years, the technology had to endure intense evolution. There were essentially four TRAME generations which are summarized in the table. A description of the four generations of TRAME is provided below. === TRAME 1 === The project began in 1974 and in 1978 a first network with four routers was already installed and in operation at the electric utility ENHER. In 1980, the network had eight nodes in operation (see Figure I). The hardware was based on the Zilog Z80 processor and had a multiprocessor structure with 16 processors sharing a common memory. The software was developed at ENHER's headquarters located in the well-known Casa Fuster, Passeig de Gràcia, 132, Barcelona, using the Z80 assembly language. Beyond 1980 the software began to be written in C programming language and an HP64000 Logic Development System emulator was used for the purpose. The hardware was produced by ISEL, an INI (Instituto Nacional de Indústria) company. The routing system was a variant of Bellman-Ford with split-horizon. It was an improvement of the original ARPA network routing system consisting of an original update procedure which allowed for a faster reaction to changes. The distance function was the number of packets in the output waiting queues plus one. The line protocols (UCL for internal lines linking routers and UTR for accessing the network) were designed to meet the stringent requirements set for telecontrol (SCADA) of high-voltage power networks (IEC-870-5-1 and ANSI C37.1 standards). At the OSI transport layer, windows with a width of 1 to 8, depending on the required service, residing in the terminals were used. Initially, addresses were only 14 bits long to address both the routers (called nodes by then) and the devices connected to them. They were made up of two fields, an 8-bit field to address the router and a 6-bit sub-address to address the terminals connected to it. The node address was assigned to the nodes and not to the ends of the links as in the internet. The basic advantages of TRAME over other technologies used in electric utilities at the time were in part due to the packet technology itself: ability to manage any network topology, automatic adaptability to topological and traffic changes, integration of different link technologies (digital or analog) and capacities in a single network, open and decentralized intercommunicability between users and devices, simultaneous communication with several users and locations from a single physical connection, and integrated network supervision. In fact, the network was provided from its inception with a supervision center consisting of a computer and a synoptic board located at the company's headquarters (see Figure II). But other advantages were due to the specific design of TRAME: high data integrity, priority support for packets, and ease of including special protocols such as the many SCADA protocols in use at that time. All of the above resulted in improved quality of service, especially with respect to data availability and data integrity, and in the integration of services in a single network. Part of the evolution of its deployment can be seen in Figures II to IV. === TRAME 2 === In 1990, TRAME 2 was fully deployed and TRAME 1 was replaced. The processor of the new hardware was Intel 80286 and the hardware structure and external appearance of the routers was very similar to that of TRAME 1. The software was written in C and the above-mentioned emulator continued to be used. Improvements over TRAME 1 were the introduction of the standardized X.25 access protocol
Telenet
Telenet was an American commercial packet-switched network which went into service in August 16, 1975. It was the first FCC-licensed public data network in the United States. Various commercial and government interests paid monthly fees for dedicated lines connecting their computers and local networks to this backbone network. Free public dialup access to Telenet, for those who wished to access these systems, was provided in hundreds of cities throughout the United States. == History == After establishing that commercial operation of "value added carriers" was legal in the U.S., Bolt Beranek and Newman (BBN), who were the private contractors for constructing packet switching nodes (Interface Message Processor) for the ARPANET, set out to create a private sector version. The original founding company, Telenet Inc., was established by BBN. In January 1975, Telenet Communications Corporation announced that they had acquired the necessary venture capital after a two-year quest. Initially, Bob Kahn was the first President of Telenet; he then moved to ARPA as Larry Roberts left to become President of the company. Barry Wessler also joined from ARPA. On August 16 of the same year they began operating the first public data network. The network offered an email service called Telemail. Telenet had its first offices in downtown Washington, D.C., then moved to McLean, Virginia. It was acquired by GTE in 1979, and then moved to offices in Reston, Virginia. It was later acquired by Sprint and called "Sprintnet". Sprint migrated customers from Telenet to the modern-day Sprintlink IP network, one of many networks composing today's Internet. == Coverage == Originally, the public network had switching nodes in seven US cities: Washington, D.C. (network operations center as well as switching) Boston, Massachusetts New York, New York Chicago, Illinois Dallas, Texas San Francisco, California Los Angeles, California The switching nodes were fed by Telenet Access Controller (TAC) terminal concentrators both colocated and remote from the switches. By 1980, there were over 1000 switches in the public network. At that time, the next largest network using Telenet switches was that of Southern Bell, which had approximately 250 switches. In 1977, Telenet added a London node and a Network Control Centre in a London building of Britain's Post Office Telecommunications. == Internal network technology == Telenet initially used a proprietary virtual connection host interface. The network used statically defined hop-by-hop routing, using Prime commercial minicomputers as switches, but then migrated to a purpose-built multiprocessing switch based on 6502 microprocessors. Among the innovations of this second-generation switch was a patented arbitrated bus interface that created a switched fabric among the microprocessors. By contrast, a typical microprocessor-based system of the time used a bus; switched fabrics did not become common until about twenty years later, with the advent of PCI Express and HyperTransport. Most interswitch lines ran at 56 kbit/s, with a few, such as New York-Washington, at T1 (i.e., 1.544 Mbit/s). Originally, the switching tables could not be altered separately from the main executable code, and topology updates had to be made by deliberately crashing the switch code and forcing a reboot from the network management center. Improvements in the software allowed new tables to be loaded, but the network never used dynamic routing protocols. Multiple static routes, on a switch-by-switch basis, could be defined for fault tolerance. Network management functions continued to run on Prime minicomputers. Roberts and Barry Wessler joined the international effort to standardize the a protocol for packet-switched data communication based on virtual circuits shortly before it was finalized. The CCITT proposal for X.25 was being prepared by Rémi Després and other international experts. A few minor changes, which complemented the proposed specification, were accommodated to enable Telenet to join the agreement. Telenet adopted X.25 shortly after the protocol was published in March 1976. Its X.25 host interface was the first in the industry. The main internal protocol was a proprietary variant on X.75; Telenet also ran standard X.75 gateways to other packet switching networks. == Accessing the network == === Basic asynchronous access === Users could use modems on the Public Switched Telephone Network to dial TAC ports, calling either from "dumb" terminals or from computers emulating such terminals. Organizations with a large number of local terminals could install a TAC on their own site, which used a dedicated line, at up to 56 kbit/s, to connect to a switch at the nearest Telenet location. Dialup modems supported had a maximum speed of 1200 bit/s, and later 4800 bit/s. For example, a customer in NYC could dial into the local number, then type in a command similar to: which would connect (that "c") them to a computer system designated as number "555" located in the same vicinity as the standard telephone "area code" 301. One significant customer was an early (what would now be called) internet service provider The Source which had their equipment in Mclean, Va. Telenet offered a much lower nighttime rate when there were few corporate customers, and this let The Source set up a modestly priced offering to tens of thousands of customers. Another prominent customer in the 1980s was Quantum Link (now AOL). === Other access protocols === Telenet supported remote concentrators for IBM 3270 family intelligent terminals, which communicated, via X.25 to Telenet-written software that ran in IBM 370x series front-end processors. Telenet also supported Block Mode Terminal Interfaces (BMTI) for IBM Remote Job Entry terminals supporting the 2780/3780 and HASP Bisync protocols. === PC Pursuit === In the late 1980s, Telenet offered a service called PC Pursuit. For a flat monthly fee, customers could dial into the Telenet network in one city, then dial out on the modems in another city to access bulletin board systems and other services. PC Pursuit was popular among computer hobbyists because it sidestepped long-distance charges. In this sense, PC Pursuit was similar to the Internet, allowing any user to call any system as if it were local. On connection to the network, the user entered a 5-letter code for the target city they wished to call. This consisted of a 2-letter state code and a 3-letter acronym for the city. For instance, to call a system in Cleveland, Ohio, the user would enter the code OHCLV, for "OHio", "CLeVeland". Once connected, the user could dial out to any local number, and the system simulated a direct connection between the two endpoints.
Split screen (computing)
Split screen is a display technique in computer graphics that consists of dividing graphics and/or text into non-overlapping adjacent parts, typically as two or four rectangular areas. This allows for the simultaneous presentation of (usually) related graphical and textual information on a computer display. TV sports adopted this presentation methodology in the 1960s for instant replay. Non-dynamic split screens differ from windowing systems in that the latter allowed overlapping and freely movable parts of the screen (the "windows") to present both related and unrelated application data to the user. In contrast, split-screen views are strictly limited to fixed positions. The split screen technique can also be used to run two instances of an application, potentially allowing another user to interact with the second instance. == In operating systems == Split screen modes are used by mobile operating systems to enable computer multitasking similar to the window interface present in desktop operating systems. Android supports split screen view of two apps natively on all devices, while certain devices, such as Samsung Galaxy Z TriFold, support three sumultaneous views. Split screen functionality is not supported on iOS, but a similar feature called Split View is present in iPadOS, first introduced in 2015 with the first generation of iPad Pro. == In video games == The split screen feature is commonly used in non-networked, also known as couch co-op, video games with multiplayer options. In its most easily understood form, a split screen for a multiplayer video game is an audiovisual output device (usually a standard television for video game consoles) where the display has been divided into 2-4 equally sized areas (depending on number of players) so that the players can explore different areas simultaneously without being close to each other. This has historically been remarkably popular on consoles, which until the 2000s did not have access to the Internet or any other network and is less common today with modern support for networked console-to-console multiplayer. In competitive split-screen games, it is customarily considered cheating to look at another player's screen section to gain an advantage. === History === Split screen gaming dates back to at least the 1970s, with games such Drag Race (1977) from Kee Games in the arcades being presented in this format. It has always been a common feature of two or more player home console and computer games too, with notable titles being Kikstart II for 8-bit systems, a number of 16-bit racing games (such as Lotus Esprit Turbo Challenge and Road Rash II), and action/strategy games (such as Toejam & Earl and Lemmings), all employing a vertical or horizontal screen split for two player games. Xenophobe is notable as a three-way split screen arcade title, although on home platforms it was reduced to one or two screens. The addition of four controller ports on home consoles also ushered in more four-way split screen games, with Mario Kart 64 and Goldeneye 007 on the Nintendo 64 being two well known examples. In arcades, machines tended to move towards having a whole screen for each player, or multiple connected machines, for multiplayer. On home machines, especially in the first and third person shooter genres, multiplayer is now more common over a network or the internet rather than locally with split screen. Starting from the late 2000s, the presence of split screen multiplayer has largely been declining due to the increasing prevalence of online multiplayer, though TechRadar reported a resurgence of split screen due to support from independent studios and increased interest from the players.
Pinoy baiting
Pinoy baiting is a phrase that has been used to refer to acts by non-Filipino individuals, usually celebrities or YouTubers, of posting content online purportedly with the intention of getting the attention of Filipinos, by being surprised about the Philippines or its people. Pinoy baiters are defined as giving superficial and allegedly insincere praises and similar reactions that give recognition to the Philippines or its people. Subsequent responses by Filipinos to what have been referred to as acts of Pinoy baiting have been criticized as a form of cultural cringe. This criticism would subsequently give the advice that Filipinos should not constantly require validation from non-Filipinos about themselves or their country. == Pinoy baiting mediums == === Reaction videos === On social media such as YouTube, channels with specific focus on showing their reaction towards and opinions about certain videos or topics are called reaction channels. Reaction videos are very popular and require minimal effort to create, and thus made it easy for alleged Pinoy baiting to thrive within this video-making genre. === Travel vlogs === Vlogging, short for video blogging, grew in popularity in the 2020s. Most of the popular alleged Pinoy-baiting channels tend to be vlog channels, normally following the same script under such titles as "The Philippines changed us/me", "First impression of the Philippines", "Is this really Manila?" and "Filipinos are such Kind/Good People!", and made while travelling to touristy areas such as Boracay or Bonifacio Global City and taste-testing the fast food chain Jollibee, among others. == Criticism of the phrase == Philippines-based Korean vlogger Jessica Lee had been accused by some YouTube viewers of engaging in Pinoy baiting. In a response vlog, Lee acknowledged that there may be individuals engaging in this "business strategy" of gaining views and subscribers from one of the largest communities online. However, she questioned the objectivity of some use of the phrase, citing any vlogging subject as fair game for a negative impression of being a "baiting" tool for the vlogger treating of that subject. She also invoked vloggers' freedom to choose whatever subject they want to talk about in a deep or shallow manner, while enjoining citizens to exercise their free-market right to unfollow vloggers they hate and follow those vloggers that "make them happy". She also gave her critics an explanation why she ended up vlogging about Philippine and Filipino subjects.