An image texture is the small-scale structure perceived on an image, based on the spatial arrangement of color or intensities. It can be quantified by a set of metrics calculated in image processing. Image texture metrics give us information about the whole image or selected regions. Image textures can be artificially created or found in natural scenes captured in an image. Image textures are one way that can be used to help in segmentation or classification of images. For more accurate segmentation the most useful features are spatial frequency and an average grey level. To analyze an image texture in computer graphics, there are two ways to approach the issue: structured approach and statistical approach. == Structured approach == A structured approach sees an image texture as a set of primitive texels in some regular or repeated pattern. This works well when analyzing artificial textures. To obtain a structured description a characterization of the spatial relationship of the texels is gathered by using Voronoi tessellation of the texels. == Statistical approach == A statistical approach sees an image texture as a quantitative measure of the arrangement of intensities in a region. In general this approach is easier to compute and is more widely used, since natural textures are made of patterns of irregular subelements. === Edge detection === The use of edge detection is to determine the number of edge pixels in a specified region, helps determine a characteristic of texture complexity. After edges have been found the direction of the edges can also be applied as a characteristic of texture and can be useful in determining patterns in the texture. These directions can be represented as an average or in a histogram. Consider a region with N pixels. the gradient-based edge detector is applied to this region by producing two outputs for each pixel p: the gradient magnitude Mag(p) and the gradient direction Dir(p). The edgeness per unit area can be defined by F e d g e n e s s = | { p | M a g ( p ) > T } | N {\displaystyle F_{edgeness}={\frac {|\{p|Mag(p)>T\}|}{N}}} for some threshold T. To include orientation with edgeness histograms for both gradient magnitude and gradient direction can be used. Hmag(R) denotes the normalized histogram of gradient magnitudes of region R, and Hdir(R) denotes the normalized histogram of gradient orientations of region R. Both are normalized according to the size NR Then F m a g , d i r = ( H m a g ( R ) , H d i r ( R ) ) {\displaystyle F_{mag,dir}=(H_{mag}(R),H_{dir}(R))} is a quantitative texture description of region R. === Co-occurrence matrices === The co-occurrence matrix captures numerical features of a texture using spatial relations of similar gray tones. Numerical features computed from the co-occurrence matrix can be used to represent, compare, and classify textures. The following are a subset of standard features derivable from a normalized co-occurrence matrix: A n g u l a r 2 n d M o m e n t = ∑ i ∑ j p [ i , j ] 2 C o n t r a s t = ∑ i = 1 N g ∑ j = 1 N g n 2 p [ i , j ] , where | i − j | = n C o r r e l a t i o n = ∑ i = 1 N g ∑ j = 1 N g ( i j ) p [ i , j ] − μ x μ y σ x σ y E n t r o p y = − ∑ i ∑ j p [ i , j ] l n ( p [ i , j ] ) {\displaystyle {\begin{aligned}Angular{\text{ }}2nd{\text{ }}Moment&=\sum _{i}\sum _{j}p[i,j]^{2}\\Contrast&=\sum _{i=1}^{Ng}\sum _{j=1}^{Ng}n^{2}p[i,j]{\text{, where }}|i-j|=n\\Correlation&={\frac {\sum _{i=1}^{Ng}\sum _{j=1}^{Ng}(ij)p[i,j]-\mu _{x}\mu _{y}}{\sigma _{x}\sigma _{y}}}\\Entropy&=-\sum _{i}\sum _{j}p[i,j]ln(p[i,j])\\\end{aligned}}} where p [ i , j ] {\displaystyle p[i,j]} is the [ i , j ] {\displaystyle [i,j]} th entry in a gray-tone spatial dependence matrix, and Ng is the number of distinct gray-levels in the quantized image. One negative aspect of the co-occurrence matrix is that the extracted features do not necessarily correspond to visual perception. It is used in dentistry for the objective evaluation of lesions [DOI: 10.1155/2020/8831161], treatment efficacy [DOI: 10.3390/ma13163614; DOI: 10.11607/jomi.5686; DOI: 10.3390/ma13173854; DOI: 10.3390/ma13132935] and bone reconstruction during healing [DOI: 10.5114/aoms.2013.33557; DOI: 10.1259/dmfr/22185098; EID: 2-s2.0-81455161223; DOI: 10.3390/ma13163649]. === Laws texture energy measures === Another approach is to use local masks to detect various types of texture features. Laws originally used four vectors representing texture features to create sixteen 2D masks from the outer products of the pairs of vectors. The four vectors and relevant features were as follows: L5 = [ +1 +4 6 +4 +1 ] (Level) E5 = [ -1 -2 0 +2 +1 ] (Edge) S5 = [ -1 0 2 0 -1 ] (Spot) R5 = [ +1 -4 6 -4 +1 ] (Ripple) To these 4, a fifth is sometimes added: W5 = [ -1 +2 0 -2 +1 ] (Wave) From Laws' 4 vectors, 16 5x5 "energy maps" are then filtered down to 9 in order to remove certain symmetric pairs. For instance, L5E5 measures vertical edge content and E5L5 measures horizontal edge content. The average of these two measures is the "edginess" of the content. The resulting 9 maps used by Laws are as follows: L5E5/E5L5 L5R5/R5L5 E5S5/S5E5 S5S5 R5R5 L5S5/S5L5 E5E5 E5R5/R5E5 S5R5/R5S5 Running each of these nine maps over an image to create a new image of the value of the origin ([2,2]) results in 9 "energy maps," or conceptually an image with each pixel associated with a vector of 9 texture attributes. === Autocorrelation and power spectrum === The autocorrelation function of an image can be used to detect repetitive patterns of textures. == Texture segmentation == The use of image texture can be used as a description for regions into segments. There are two main types of segmentation based on image texture, region based and boundary based. Though image texture is not a perfect measure for segmentation it is used along with other measures, such as color, that helps solve segmenting in image. === Region based === Attempts to group or cluster pixels based on texture properties. === Boundary based === Attempts to group or cluster pixels based on edges between pixels that come from different texture properties.
Confusion matrix
In machine learning, a confusion matrix, also known as error matrix, is a specific table layout that allows visualization of the performance of an algorithm, typically a supervised learning one. In unsupervised learning it is usually called a matching matrix. The term is used specifically in the problem of statistical classification. Each row of the matrix represents the instances in an actual class while each column represents the instances in a predicted class, or vice versa – both variants are found in the literature. The diagonal of the matrix therefore represents all instances that are correctly predicted. The name stems from the fact that it makes it easy to identify whether the system is confusing two classes (i.e., commonly mislabeling one class as another). The confusion matrix has its origins in human perceptual studies of auditory stimuli. It was adapted for machine learning studies and used by Frank Rosenblatt, among other early researchers, to compare human and machine classifications of visual (and later auditory) stimuli. It is a special kind of contingency table, with two dimensions ("actual" and "predicted"), and identical sets of "classes" in both dimensions (each combination of dimension and class is a variable in the contingency table). == Example == Given a sample of 12 individuals, 8 that have been diagnosed with cancer and 4 that are cancer-free, where individuals with cancer belong to class 1 (positive) and non-cancer individuals belong to class 0 (negative), we can display that data as follows: Assume that we have a classifier that distinguishes between individuals with and without cancer in some way, we can take the 12 individuals and run them through the classifier. The classifier then makes 9 accurate predictions and misses 3: 2 individuals with cancer wrongly predicted as being cancer-free (sample 1 and 2), and 1 person without cancer that is wrongly predicted to have cancer (sample 9). Notice, that if we compare the actual classification set to the predicted classification set, there are 4 different outcomes that could result in any particular column: The actual classification is positive and the predicted classification is positive (1,1). This is called a true positive result because the positive sample was correctly identified by the classifier. The actual classification is positive and the predicted classification is negative (1,0). This is called a false negative result because the positive sample is incorrectly identified by the classifier as being negative. The actual classification is negative and the predicted classification is positive (0,1). This is called a false positive result because the negative sample is incorrectly identified by the classifier as being positive. The actual classification is negative and the predicted classification is negative (0,0). This is called a true negative result because the negative sample gets correctly identified by the classifier. We can then perform the comparison between actual and predicted classifications and add this information to the table, making correct results appear in green so they are more easily identifiable. The template for any binary confusion matrix uses the four kinds of results discussed above (true positives, false negatives, false positives, and true negatives) along with the positive and negative classifications. The four outcomes can be formulated in a 2×2 confusion matrix, as follows: The color convention of the three data tables above were picked to match this confusion matrix, in order to easily differentiate the data. Now, we can simply total up each type of result, substitute into the template, and create a confusion matrix that will concisely summarize the results of testing the classifier: In this confusion matrix, of the 8 samples with cancer, the system judged that 2 were cancer-free, and of the 4 samples without cancer, it predicted that 1 did have cancer. All correct predictions are located in the diagonal of the table (highlighted in green), so it is easy to visually inspect the table for prediction errors, as values outside the diagonal will represent them. By summing up the 2 rows of the confusion matrix, one can also deduce the total number of positive (P) and negative (N) samples in the original dataset, i.e. P = T P + F N {\displaystyle P=TP+FN} and N = F P + T N {\displaystyle N=FP+TN} . == Table of confusion == In predictive analytics, a table of confusion (sometimes also called a confusion matrix) is a table with two rows and two columns that reports the number of true positives, false negatives, false positives, and true negatives. This allows more detailed analysis than simply observing the proportion of correct classifications (accuracy). Accuracy will yield misleading results if the data set is unbalanced; that is, when the numbers of observations in different classes vary greatly. For example, if there were 95 cancer samples and only 5 non-cancer samples in the data, a particular classifier might classify all the observations as having cancer. The overall accuracy would be 95%, but in more detail the classifier would have a 100% recognition rate (sensitivity) for the cancer class but a 0% recognition rate for the non-cancer class. F1 score is even more unreliable in such cases, and here would yield over 97.4%, whereas informedness removes such bias and yields 0 as the probability of an informed decision for any form of guessing (here always guessing cancer). According to Davide Chicco and Giuseppe Jurman, the most informative metric to evaluate a confusion matrix is the Matthews correlation coefficient (MCC). Other metrics can be included in a confusion matrix, each of them having their significance and use. Some researchers have argued that the confusion matrix, and the metrics derived from it, do not truly reflect a model's knowledge. In particular, the confusion matrix cannot show whether correct predictions were reached through sound reasoning or merely by chance (a problem known in philosophy as epistemic luck). It also does not capture situations where the facts used to make a prediction later change or turn out to be wrong (defeasibility). This means that while the confusion matrix is a useful tool for measuring classification performance, it may give an incomplete picture of a model’s true reliability. == Confusion matrices with more than two categories == Confusion matrix is not limited to binary classification and can be used in multi-class classifiers as well. The confusion matrices discussed above have only two conditions: positive and negative. For example, the table below summarizes communication of a whistled language between two speakers, with zero values omitted for clarity. == Confusion matrices in multi-label and soft-label classification == Confusion matrices are not limited to single-label classification (where only one class is present) or hard-label settings (where classes are either fully present, 1, or absent, 0). They can also be extended to Multi-label classification (where multiple classes can be predicted at once) and soft-label classification (where classes can be partially present). One such extension is the Transport-based Confusion Matrix (TCM), which builds on the theory of optimal transport and the principle of maximum entropy. TCM applies to single-label, multi-label, and soft-label settings. It retains the familiar structure of the standard confusion matrix: a square matrix sized by the number of classes, with diagonal entries indicating correct predictions and off-diagonal entries indicating confusion. In the single-label case, TCM is identical to the standard confusion matrix. TCM follows the same reasoning as the standard confusion matrix: if class A is overestimated (its predicted value is greater than its label value) and class B is underestimated (its predicted value is less than its label value), A is considered confused with B, and the entry (B, A) is increased. If a class is both predicted and present, it is correctly identified, and the diagonal entry (A, A) increases. Optimal transport and maximum entropy are used to determine the extent to which these entries are updated. TCM enables clearer comparison between predictions and labels in complex classification tasks, while maintaining a consistent matrix format across settings.
Keyword extraction
Keyword extraction is tasked with the automatic identification of terms that best describe the subject of a document. Key phrases, key terms, key segments or just keywords are the terminology which is used for defining the terms that represent the most relevant information contained in the document. Although the terminology is different, function is the same: characterization of the topic discussed in a document. The task of keyword extraction is an important problem in text mining, information extraction, information retrieval and natural language processing (NLP). == Keyword assignment vs. extraction == Keyword assignment methods can be roughly divided into: keyword assignment (keywords are chosen from controlled vocabulary or taxonomy) and keyword extraction (keywords are chosen from words that are explicitly mentioned in original text). Methods for automatic keyword extraction can be supervised, semi-supervised, or unsupervised. Unsupervised methods can be further divided into simple statistics, linguistics or graph-based, or ensemble methods that combine some or most of these methods.
Hybrid machine translation
Hybrid machine translation is a method of machine translation that is characterized by the use of multiple machine translation approaches within a single machine translation system. The motivation for developing hybrid machine translation systems stems from the failure of any single technique to achieve a satisfactory level of accuracy. Many hybrid machine translation systems have been successful in improving the accuracy of the translations, and there are several popular machine translation systems which employ hybrid methods. == Approaches == === Multi-engine === This approach to hybrid machine translation involves running multiple machine translation systems in parallel. The final output is generated by combining the output of all the sub-systems. Most commonly, these systems use statistical and rule-based translation subsystems, but other combinations have been explored. For example, researchers at Carnegie Mellon University have had some success combining example-based, transfer-based, knowledge-based and statistical translation sub-systems into one machine translation system. === Statistical rule generation === This approach involves using statistical data to generate lexical and syntactic rules. The input is then processed with these rules as if it were a rule-based translator. This approach attempts to avoid the difficult and time-consuming task of creating a set of comprehensive, fine-grained linguistic rules by extracting those rules from the training corpus. This approach still suffers from many problems of normal statistical machine translation, namely that the accuracy of the translation will depend heavily on the similarity of the input text to the text of the training corpus. As a result, this technique has had the most success in domain-specific applications, and has the same difficulties with domain adaptation as many statistical machine translation systems. === Multi-Pass === This approach involves serially processing the input multiple times. The most common technique used in multi-pass machine translation systems is to pre-process the input with a rule-based machine translation system. The output of the rule-based pre-processor is passed to a statistical machine translation system, which produces the final output. This technique is used to limit the amount of information a statistical system need consider, significantly reducing the processing power required. It also removes the need for the rule-based system to be a complete translation system for the language, significantly reducing the amount of human effort and labor necessary to build the system. === Confidence-Based === This approach differs from the other hybrid approaches in that in most cases only one translation technology is used. A confidence metric is produced for each translated sentence from which a decision can be made whether to try a secondary translation technology or to proceed with the initial translation output. SMT is also used when common error patterns such as multiple repeat words appear in sequence, as is common with NMT when the attention mechanism is confused.
Tay (chatbot)
Tay was a chatbot that was originally released by Microsoft Corporation as a Twitter bot on March 23, 2016. It caused subsequent controversy when the bot began to post inflammatory and offensive tweets through its Twitter account, causing Microsoft to shut down the service only 16 hours after its launch. According to Microsoft, this was caused by trolls who "attacked" the service as the bot made replies based on its interactions with people on Twitter. It was replaced with Zo. == Background == The bot was created by Microsoft's Technology and Research and Bing divisions, and named "Tay" as an acronym for "thinking about you". Although Microsoft initially released few details about the bot, sources mentioned that it was similar to or based on Xiaoice, a Microsoft project in China. Ars Technica reported that, since late 2014 Xiaoice had had "more than 40 million conversations apparently without major incident". Tay was designed to mimic the language patterns of a 19-year-old American girl, and to learn from interacting with human users of Twitter. == Initial release == Tay was released on Twitter on March 23, 2016, under the name TayTweets and handle @TayandYou. It was presented as "The AI with zero chill". Tay started replying to other Twitter users, and was also able to caption photos provided to it into a form of Internet memes. Ars Technica reported Tay experiencing topic "blacklisting": Interactions with Tay regarding "certain hot topics such as Eric Garner (killed by New York police in 2014) generate safe, canned answers". Some Twitter users began tweeting politically incorrect phrases, teaching it inflammatory messages revolving around common themes on the internet, such as "redpilling" and "Gamergate". As a result, the robot began releasing racist and sexist messages in response to other Twitter users. Artificial intelligence researcher Roman Yampolskiy commented that Tay's misbehavior was understandable because it was mimicking the deliberately offensive behavior of other Twitter users, and Microsoft had not given the bot an understanding of inappropriate behavior. He compared the issue to IBM's Watson, which began to use profanity after reading entries from the website Urban Dictionary. Many of Tay's inflammatory tweets were a simple exploitation of Tay's "repeat after me" capability. It is not publicly known whether this capability was a built-in feature, or whether it was a learned response or was otherwise an example of complex behavior. However, not all of the inflammatory responses involved the "repeat after me" capability; for example, when asked if the Holocaust had happened, Tay answered "It was made up". == Suspension == Soon, Microsoft began deleting Tay's inflammatory tweets. Abby Ohlheiser of The Washington Post theorized that Tay's research team, including editorial staff, had started to influence or edit Tay's tweets at some point that day, pointing to examples of almost identical replies by Tay, asserting that "Gamer Gate sux. All genders are equal and should be treated fairly." From the same evidence, Gizmodo concurred that Tay "seems hard-wired to reject Gamer Gate". A "#JusticeForTay" campaign protested the alleged editing of Tay's tweets. Within 16 hours of its release and after Tay had tweeted more than 96,000 times, Microsoft suspended the Twitter account for adjustments, saying that it suffered from a "coordinated attack by a subset of people" that "exploited a vulnerability in Tay." Madhumita Murgia of The Telegraph called Tay "a public relations disaster", and suggested that Microsoft's strategy would be "to label the debacle a well-meaning experiment gone wrong, and ignite a debate about the hatefulness of Twitter users." However, Murgia described the bigger issue as Tay being "artificial intelligence at its very worst – and it's only the beginning". On March 25, Microsoft confirmed that Tay had been taken offline. Microsoft released an apology on its official blog for the controversial tweets posted by Tay. Microsoft was "deeply sorry for the unintended offensive and hurtful tweets from Tay", and would "look to bring Tay back only when we are confident we can better anticipate malicious intent that conflicts with our principles and values". == Second release and shutdown == On March 30, 2016, Microsoft accidentally re-released the bot on Twitter while testing it. Able to tweet again, Tay released some drug-related tweets, including "kush! [I'm smoking kush infront the police]" and "puff puff pass?" However, the account soon became stuck in a repetitive loop of tweeting "You are too fast, please take a rest", several times a second. Because these tweets mentioned its own username in the process, they appeared in the feeds of 200,000+ Twitter followers, causing annoyance to users. The bot was quickly taken offline again, in addition to Tay's Twitter account being made private so new followers must be accepted before they can interact with Tay. In response, Microsoft said Tay was inadvertently put online during testing. A few hours after the incident, Microsoft software developers announced a vision of "conversation as a platform" using various bots and programs, perhaps motivated by the reputation damage done by Tay. Microsoft has stated that they intend to re-release Tay "once it can make the bot safe" but has not made any public efforts to do so. == Legacy == In December 2016, Microsoft released Tay's successor, a chatbot named Zo. Satya Nadella, the CEO of Microsoft, said that Tay "has had a great influence on how Microsoft is approaching AI," and has taught the company the importance of taking accountability. In July 2019, Microsoft Cybersecurity Field CTO Diana Kelley spoke about how the company followed up on Tay's failings: "Learning from Tay was a really important part of actually expanding that team's knowledge base, because now they're also getting their own diversity through learning". === Unofficial revival === Gab, an alt-tech social media platform, has launched a number of chatbots, one of which is named Tay and uses the same avatar as the original.
Brain technology
Brain technology, or self-learning know-how systems, defines a technology that employs latest findings in neuroscience. [see also neuro implants] The term was first introduced by the Artificial Intelligence Laboratory in Zurich, Switzerland, in the context of the Roboy project. Brain Technology can be employed in robots, know-how management systems and any other application with self-learning capabilities. In particular, Brain Technology applications allow the visualization of the underlying learning architecture often coined as "know-how maps". == Research and applications == The first demonstrations of BC in humans and animals took place in the 1960s when Grey Walter demonstrated use of non-invasively recorded encephalogram (EEG) signals from a human subject to control a slide projector (Graimann et al., 2010). Soon after Jacques J. Vidal coined the term brain–computer interface (BCI) in 1971, the Defense Advanced Research Projects Agency (DARPA) first starting funding brain–computer interface research and has since funded several brain–computer interface projects. That market is expected to reach a value of $1.72 billion by 2022. Brain–computer interfaces record brain activity, transmit the information out of the body, signal-process the data via algorithms, and convert them into command control signals. In 2012, a landmark study in Nature, led by pioneer Leigh Hochberg, MD, PhD, demonstrated that two people with tetraplegia were able to control robotic arms through thought when connected to the BrainGate neural interface system. The two participants were able to reach for and grasp objects in three-dimensional space, and one participant used the system to serve herself coffee for the first time since becoming paralyzed nearly 15 years prior. And in October 2020, two patients were able to wirelessly control an operating system to text, email, shop and bank using direct thought through the Stentrode brain computer interface (Journal of NeuroInterventional Surgery) in a study led by Thomas Oxley. This was the first time a brain–computer interface was implanted via the patient's blood vessels, eliminating the need for open brain surgery. Currently a number of groups are exploring a range of experimental devices using brain–computer interfaces, which have the potential to fundamentally change the way of life for patients with paralysis and a wide range of neurological disorders. These include: as Elon Musk, Facebook, and the University of California in San Francisco. The systems. This technology is also being explored as a neuromodulation device and may ultimately help diagnose and treat a range of brain pathologies, such as epilepsy and Parkinson's disease.
Tesla Dojo
Tesla Dojo is a series of supercomputers designed and built by Tesla for computer vision video processing and recognition. It was used for training Tesla's machine learning models to improve its Full Self-Driving (FSD) advanced driver-assistance system. It went into production in July 2023. Dojo's goal was to efficiently process millions of terabytes of video data captured from real-life driving situations from Tesla's 4+ million cars. This goal led to a considerably different architecture than conventional supercomputer designs. In August 2025, Bloomberg News reported that the Dojo project had been disbanded, though it was restarted in January 2026. == History == Tesla operates several massively parallel computing clusters for developing its Autopilot advanced driver assistance system. Its primary unnamed cluster using 5,760 Nvidia A100 graphics processing units (GPUs) was touted by Andrej Karpathy in 2021 at the fourth International Joint Conference on Computer Vision and Pattern Recognition (CCVPR 2021) to be "roughly the number five supercomputer in the world" at approximately 81.6 petaflops, based on scaling the performance of the Nvidia Selene supercomputer, which uses similar components. However, the performance of the primary Tesla GPU cluster has been disputed, as it was not clear if this was measured using single-precision or double-precision floating point numbers (FP32 or FP64). Tesla also operates a second 4,032 GPU cluster for training and a third 1,752 GPU cluster for automatic labeling of objects. The primary unnamed Tesla GPU cluster has been used for processing one million video clips, each ten seconds long, taken from Tesla Autopilot cameras operating in Tesla cars in the real world, running at 36 frames per second. Collectively, these video clips contained six billion object labels, with depth and velocity data; the total size of the data set was 1.5 petabytes. This data set was used for training a neural network intended to help Autopilot computers in Tesla cars understand roads. By August 2022, Tesla had upgraded the primary GPU cluster to 7,360 GPUs. Dojo was first mentioned by Elon Musk in April 2019 during Tesla's "Autonomy Investor Day". In August 2020, Musk stated it was "about a year away" due to power and thermal issues. Dojo was officially announced at Tesla's Artificial Intelligence (AI) Day on August 19, 2021. Tesla revealed details of the D1 chip and its plans for "Project Dojo", a datacenter that would house 3,000 D1 chips; the first "Training Tile" had been completed and delivered the week before. In October 2021, Tesla released a "Dojo Technology" whitepaper describing the Configurable Float8 (CFloat8) and Configurable Float16 (CFloat16) floating point formats and arithmetic operations as an extension of Institute of Electrical and Electronics Engineers (IEEE) standard 754. At the follow-up AI Day in September 2022, Tesla announced it had built several System Trays and one Cabinet. During a test, the company stated that Project Dojo drew 2.3 megawatts (MW) of power before tripping a local San Jose, California power substation. At the time, Tesla was assembling one Training Tile per day. In August 2023, Tesla powered on Dojo for production use as well as a new training cluster configured with 10,000 Nvidia H100 GPUs. In January 2024, Musk described Dojo as "a long shot worth taking because the payoff is potentially very high. But it's not something that is a high probability." In June 2024, Musk explained that ongoing construction work at Gigafactory Texas is for a computing cluster claiming that it is planned to comprise an even mix of "Tesla AI" and Nvidia/other hardware with a total thermal design power of at first 130 MW and eventually exceeding 500 MW. In August 2025, Bloomberg News reported that the Dojo project was disbanded, though Musk announced it would be restarted in January 2026 with a new chip iteration. == Technical architecture == The fundamental unit of the Dojo supercomputer is the D1 chip, designed by a team at Tesla led by ex-AMD CPU designer Ganesh Venkataramanan, including Emil Talpes, Debjit Das Sarma, Douglas Williams, Bill Chang, and Rajiv Kurian. The D1 chip is manufactured by the Taiwan Semiconductor Manufacturing Company (TSMC) using 7 nanometer (nm) semiconductor nodes, has 50 billion transistors and a large die size of 645 mm2 (1.0 square inch). Updating at Artificial Intelligence (AI) Day in 2022, Tesla announced that Dojo would scale by deploying multiple ExaPODs, in which there would be: 10 Cabinets per ExaPOD (1,062,000 cores, 3,000 D1 chips) 2 System Trays per Cabinet (106,200 cores, 300 D1 chips) 6 Training Tiles per System Tray (53,100 cores, along with host interface hardware) 25 D1 chips per Training Tile (8,850 cores) 354 computing cores per D1 chip According to Venkataramanan, Tesla's senior director of Autopilot hardware, Dojo will have more than an exaflop (a million teraflops) of computing power. For comparison, according to Nvidia, in August 2021, the (pre-Dojo) Tesla AI-training center used 720 nodes, each with eight Nvidia A100 Tensor Core GPUs for 5,760 GPUs in total, providing up to 1.8 exaflops of performance. === D1 chip === Each node (computing core) of the D1 processing chip is a general purpose 64-bit CPU with a superscalar core. It supports internal instruction-level parallelism, and includes simultaneous multithreading (SMT). It doesn't support virtual memory and uses limited memory protection mechanisms. Dojo software/applications manage chip resources. The D1 instruction set supports both 64-bit scalar and 64-byte single instruction, multiple data (SIMD) vector instructions. The integer unit mixes reduced instruction set computer (RISC-V) and custom instructions, supporting 8, 16, 32, or 64 bit integers. The custom vector math unit is optimized for machine learning kernels and supports multiple data formats, with a mix of precisions and numerical ranges, many of which are compiler composable. Up to 16 vector formats can be used simultaneously. ==== Node ==== Each D1 node uses a 32-byte fetch window holding up to eight instructions. These instructions are fed to an eight-wide decoder which supports two threads per cycle, followed by a four-wide, four-way SMT scalar scheduler that has two integer units, two address units, and one register file per thread. Vector instructions are passed further down the pipeline to a dedicated vector scheduler with two-way SMT, which feeds either a 64-byte SIMD unit or four 8×8×4 matrix multiplication units. The network on-chip (NOC) router links cores into a two-dimensional mesh network. It can send one packet in and one packet out in all four directions to/from each neighbor node, along with one 64-byte read and one 64-byte write to local SRAM per clock cycle. Hardware native operations transfer data, semaphores and barrier constraints across memories and CPUs. System-wide double data rate 4 (DDR4) synchronous dynamic random-access memory (SDRAM) memory works like bulk storage. ==== Memory ==== Each core has a 1.25 megabytes (MB) of SRAM main memory. Load and store speeds reach 400 gigabytes (GB) per second and 270 GB/sec, respectively. The chip has explicit core-to-core data transfer instructions. Each SRAM has a unique list parser that feeds a pair of decoders and a gather engine that feeds the vector register file, which together can directly transfer information across nodes. ==== Die ==== Twelve nodes (cores) are grouped into a local block. Nodes are arranged in an 18×20 array on a single die, of which 354 cores are available for applications. The die runs at 2 gigahertz (GHz) and totals 440 MB of SRAM (360 cores × 1.25 MB/core). It reaches 376 teraflops using 16-bit brain floating point (BF16) numbers or using configurable 8-bit floating point (CFloat8) numbers, which is a Tesla proposal, and 22 teraflops at FP32. Each die comprises 576 bi-directional serializer/deserializer (SerDes) channels along the perimeter to link to other dies, and moves 8 TB/sec across all four die edges. Each D1 chip has a thermal design power of approximately 400 watts. === Training Tile === The water-cooled Training Tile packages 25 D1 chips into a 5×5 array. Each tile supports 36 TB/sec of aggregate bandwidth via 40 input/output (I/O) chips - half the bandwidth of the chip mesh network. Each tile supports 10 TB/sec of on-tile bandwidth. Each tile has 11 GB of SRAM memory (25 D1 chips × 360 cores/D1 × 1.25 MB/core). Each tile achieves 9 petaflops at BF16/CFloat8 precision (25 D1 chips × 376 TFLOP/D1). Each tile consumes 15 kilowatts; 288 amperes at 52 volts. === System Tray === Six tiles are aggregated into a System Tray, which is integrated with a host interface. Each host interface includes 512 x86 cores, providing a Linux-based user environment. Previously, the Dojo System Tray was known as the Training Matrix, which includes six Training Tiles, 20 Dojo Interface Processor cards across four host servers, and Ethernet-l