Shopping for the best AI subtitle generator? An AI subtitle generator is software that uses machine learning to help you get more done — it keeps getting smarter as the underlying models improve. Pricing, accuracy, and the size of the model behind the tool are the three factors that most affect daily usefulness. Whether you are a beginner or a pro, the right AI subtitle generator slots into your workflow and pays for itself fast. We tested the leading options and ranked them by quality, value, and ease of use.
MyRadar
MyRadar is a free weather forecasting application developed by Andy Green and his Orlando, Florida-based company ACME AtronOmatic (ACME). The app began operations in 2008 and ran on government-provided weather and radar data for its first decade. In 2019, ACME launched personal satellites to improve predictions of ongoing weather. The app received funding to improve its radar and imaging from the Federal Communications Commission (FCC), National Oceanic and Atmospheric Administration (NOAA), and the Office of Naval Research (ONR). ACME created a weather data satellite constellation named "Hyperspectral Orbital Remote Imaging Spectrometer" (HORIS), which utilizes machine learning and artificial intelligence (AI) to create a current weather map. With the introduction of additional features, including the detection of wildfires and illegal fishing, the app has more broadly become an environmental intelligence app since 2022. In 2024, the app partnered with the Total Traffic and Weather Network (TTWN) to provide traffic flow and incident data for users with paying subscriptions via CarPlay and Android Auto. == History == The app's creator, Andy Green, had created internet tech since the 1980s. His first major project was the development of a public access internet service company based in Rhode Island, which he later sold to finance the creation of ACME AtronOmatic ("ACME" for short), based in Orlando, Florida. The first major app created by ACME was called "Flightwise", which provided users with flight tracking information. In summer 2008, Green had the idea to use the animated location tracker already built-in to Flightwise to make a stand-alone weather forecasting app after wondering if a meal he was eating outdoors would get rained out. MyRadar was launched in 2012 out of an office in Orlando. Despite running solely off of free government-provided weather and radar data for the first decade after launch, Green said the app "took off like wildfire" in downloads. In December 2017, the app partnered with "TripIt" to provide users with information about flight delays and gate changes, eliminating the need for a separate app like Flightwise. In 2019, ACME launched their first personal satellite for the app, a small prototype from New Zealand, as part of an effort to provide detailed imagery and improved predictions of ongoing weather unique to the app. More satellites were eventually launched by ACME to create a weather data satellite constellation named "Hyperspectral Orbital Remote Imaging Spectrometer" (HORIS), monitored by ground stations maintained by Kongsberg Satellite Services. HORIS operates MyRadar by taking the environmental data and imagery it collects and pairing it with machine learning and artificial intelligence (AI) to create a real-time weather map. In 2022, HORIS was expanded upon after ACME won approval from the Federal Communications Commission (FCC) to improve their satellite constellation to include 250 satellites or more. The main batch of satellites were PocketQubes, which entered the atmosphere on May 2, 2022, by Rocket Lab Electron launched from New Zealand, with the additional purpose to test and validate the existing satellites in orbit. In October 2022, ACME received a US$150,000 Small Business Innovation Research (SBIR) grant from the National Oceanic and Atmospheric Administration (NOAA) to improve the app's wildfire detection and air quality measurement technology to better detect smoke, aerosols, fire hotspots using satellites and aerial drones. On August 18, 2023, phase two of the NOAA grant was approved, providing an additional US$650,000 to aid in the app's aforementioned goals by launching a pair of CubeSat satellites to provide high-definition infrared imagery. On September 8, 2023, ACME secured another US$1,200,000 in crowd funding to aid accomplishing the goals of the NOAA grant by expanding the app's workforce from 35 to 100 employees by the end of 2024. In January 2024, MyRadar partnered with Total Traffic and Weather Network (TTWN) to provide traffic data overlaid with its pre-existing weather graphics for users in the United States. The partnership allowed for the app to additionally become a tool for navigation. This officially became a feature days later on January 8, 2024, when the app was made compatible with Apple's CarPlay. On February 7, 2024, the Android equivalent Android Auto also gained the ability to display the app on car interfaces. In March 2024, the app launched a "meteorological wedding planning service" in the United States and Canada for prices between US$1,000 and US$5,000, in which users can request a personal meteorologist to provide an in-person meeting about the best dates for a wedding, and on-call local weather updates the day of. Scheduled for February 2025, four more satellites to help with the NOAA-sponsored wildfire detection are to be launched, and the first by ACME to have AI processing in the satellites themself and not computers on the ground, allowing for quicker transfer of information. == Features and general information == The app's primary function is to provide weather forecasting and prediction to users. The app includes toggleable options to track and send alerts to users for rain, wind patterns, earthquakes, tornadoes, tropical cyclones, wildfires, and more. In early 2020, a feature was added to track orbital objects such as the International Space Station. In May 2022, with the imagery improvement of HORIS, the app gained the secondary abilities to better monitor algae blooms, coral reefs, illegal fishing, and wildfires. In January and February 2024, the ability to display traffic flow and incident data in a feature called "RouteCast" was added, and can be displayed in video and 3D options via CarPlay and Android Auto for users with paying subscriptions. The app also provides annual tropical storm and tornado outlooks for their respective seasons, gathered through satellite and aerial drone data, as well as through on the ground storm chasers.
Terminology model
A terminology model is a refinement of a concept system. Within a terminology model the concepts (object types) of a specific problem or subject area are defined by subject-matter experts in terms of concept (object type) definitions and definitions of subordinated concepts or characteristics (properties). Besides object types, the terminology model allows defining hierarchical classifications, definitions for object type and property behavior and definition of casual relations. The terminology model is a means for subject-matter experts to express their knowledge about the subject in subject-specific terms. Since the terminology model is structured rather similar to an object-oriented database schema, is can be transformed without loss of information into an object-oriented database schema. Thus, the terminology model is a method for problem analysis on the one side and a mean of defining database schema on the other side. Several terminology models have been developed and published in the field of statistics: Terminology model for classifications Terminology model for statistical variables Reference model for statistical metadata
Cybernetic Serendipity
Cybernetic Serendipity was an exhibition of cybernetic art curated by Jasia Reichardt, shown at the Institute of Contemporary Arts, London, England, from 2 August to 20 October 1968, and then toured across the United States. Two stops in the United States were the Corcoran Annex (Corcoran Gallery of Art), Washington, D.C., from 16 July to 31 August 1969, and the newly opened Exploratorium in San Francisco, from 1 November to 18 December 1969. == Content == One part of the exhibition was concerned with algorithms and devices for generating music. Some exhibits were pamphlets describing the algorithms, whilst others showed musical notation produced by computers. Devices made musical effects and played tapes of sounds made by computers. Peter Zinovieff lent part of his studio equipment - visitors could sing or whistle a tune into a microphone and his equipment would improvise a piece of music based on the tune. Another part described computer projects such as Gustav Metzger's self-destructive Five Screens With Computer, a design for a new hospital, a computer programmed structure, and dance choreography. The machines and installations were a very noticeable part of the exhibition. Gordon Pask produced a collection of large mobiles (Colloquy of Mobiles (1968)) with interacting parts that let the viewers join in the conversation. Many machines formed kinetic environments or displayed moving images. Bruce Lacey contributed his radio-controlled robots and a light-sensitive owl. Nam June Paik was represented by Robot K-456 and televisions with distorted images. Jean Tinguely provided two of his painting machines. Edward Ihnatowicz's biomorphic hydraulic ear (Sound Activated Mobile (SAM, 1968)) turned toward sounds and John Billingsley's Albert 1967 turned to face light. Wen-Ying Tsai presented his interactive cybernetic sculptures of vibrating stainless-steel rods, stroboscopic light, and audio feedback control. Several artists exhibited machines that drew patterns that the visitor could take away, or involved visitors in games. Cartoonist Rowland Emett designed the mechanical computer Forget-me-not, which was commissioned by Honeywell. Another section explored the computer's ability to produce text - both essays and poetry. Different programs produced Haiku, children's stories, and essays. One of the first computer-generated poems, by Alison Knowles and James Tenney, was included in the exhibition and catalogue. Computer-generated movies were represented by John Whitney's Permutations and a Bell Labs movie on their technology for producing movies. Some samples included images of tesseracts rotating in four dimensions, a satellite orbiting the Earth, and an animated data structure. Computer graphics were also represented, including pictures produced on cathode ray oscilloscopes and digital plotters. There was a variety of posters and graphics demonstrating the power of computers to do complex (and apparently random) calculations. Other graphics showed a simulated Mondrian and the iconic decreasing squares spiral that appeared on the exhibition's poster and book. The Boeing Company exhibited their use of wireframe graphics. The innovative computer-generated sculpture, Quad 1, was displayed at the Cybernetic Serendipity exhibit. Created by the American abstract expressionist sculptor, Robert Mallary, in 1968, Quad 1 is widely believed to be the world's first Computer Aided Design sculpture. Keith Albarn & Partners contributed to the design of the exhibition. Reflecting the prominence of music in the show, a ten-track album Cybernetic Serendipity Music was released by the ICA to accompany the show. Artists featured included Iannis Xenakis, John Cage, and Peter Zinovieff, a detail of whose graphic score for 'Four Sacred April Rounds’ (1968) was used as the cover artwork. == Attendance == Time magazine noted that there had been 40,000 visitors to the London exhibition. Other reports suggested visitor numbers were as high as 44,000 to 60,000. However, the ICA did not accurately count visitors. == After-effects == The exhibition provided the energy for the formation of British Computer Arts Society which continued to explore the interaction between science, technology and art, and put on exhibitions (for example Event One at the Royal College of Art). Several pieces were purchased by the Exploratorium in 1971, some of which are on display to this day. In 2014 the ICA held a retrospective exhibition Cybernetic Serendipity: A Documentation which included documents, installation photographs, press reviews and publications and a series of discussions in one of which Peter Zinovieff took part. To coincide with the exhibition, Cybernetic Serendipity Music was re-released as a limited-edition vinyl LP by The Vinyl Factory. The Victoria and Albert Museum marked the 50th anniversary with an exhibition in 2018 entitled "Chance and Control: Art in the Age of Computers". The V&A exhibition included many works by artists who featured in the original ICA show, plus related ephemera. "Chance and Control" subsequently toured to Chester Visual Arts and Firstsite, Colchester. In 2020, The Centre Pompidou exhibited the replica of Gordon Pask's 1968 Colloquy of Mobiles, reproduced by Paul Pangaro and TJ McLeish in 2018. In 2022 the Australian National University's School of Cybernetics launched the school by presenting an exhibition Australian Cybernetic: a point through time. The exhibition included works from Cybernetic Serendipity (1968), Australia ‘75: Festival of Creative Arts and Science (1975), and contemporary pieces curated by the School of Cybernetics. In describing Reichardt's Cybernetic Serendipity exhibition the school stated that it "represented points of expanding the cybernetic imagination" and was a "ground-breaking" "glimpse of a future in which computers were entangled with people and cultures, and through this she fashioned a blueprint for the future of computing that has since inspired generations".
Digistar
Digistar is the first computer graphics-based planetarium projection and content system. It was designed by Evans & Sutherland and released in 1983. The technology originally focused on accurate and high quality display of stars, including for the first time showing stars from points of view other than Earth's surface, travelling through the stars, and accurately showing celestial bodies from different times in the past and future. Beginning with the Digistar 3 the system now projects full-dome video. == Projector == Unlike modern full-dome systems, which use LCD, DLP, SXRD, or laser projection technology, the Digistar projection system was designed for projecting bright pinpoints of light representing stars. This was accomplished using a calligraphic display, a form of vector graphics, rather than raster graphics. The heart of the Digistar projector is a large cathode-ray tube (CRT). A phosphor plate is mounted atop the tube, and light is then dispersed by a large lens with a 160 degree field of view to cover the planetarium dome. The original lens bore the inscription: "August 1979 mfg. by Lincoln Optical Corp., L.A., CA for Evans and Sutherland Computer Corp., SLC, UT, Digital planetarium CRT projection lens, 43mm, f2.8, 160 degree field of view". The coordinates of the stars and wire-frame models to be displayed by the projector were stored in computer RAM in a display list. The display would read each set of coordinates in turn and drive the CRT's electron beam directly to those coordinates. If the electron beam was enabled while being moved a line would be painted on the phosphor plate. Otherwise, the electron beam would be enabled once at its destination and a star would be painted. Once all coordinates in the display list had been processed, the display would repeat from the top of the display list. Thus, the shorter the display list the more frequently the electron beam would refresh the charge on a given point on the phosphor plate, making the projection of the points brighter. In this way, the stars projected by Digistar were substantially brighter than could be achieved using a raster display, which has to touch every point on the phosphor plate before repeating. Likewise, the calligraphic technology allowed Digistar to have a darker black-level than full-dome projectors, since the portions of the phosphor plate representing dark sky were never hit by the electron beam. As it is only one tube, with no pixelated color filter screen, the Digistar projector is monochromatic. The Digistar projects a bright, phosphorescent green, though many (including both visitors and planetarians) report they cannot distinguish between this green and white. Additionally, unlike a raster display, the calligraphic display is not discretized into pixels, so the displayed stars were a more realistic single spot of light, without the blocky or ropy artifacts that are hard to avoid with raster graphics. Due to the use of vector graphics, as opposed to raster imaging, the Digistar does not have the resolution issues that many full-dome systems have. Thanks to this, and the brightness of the CRT, only one projector is needed to project on the entire dome, whereas most full-dome systems require up to six raster projectors, depending on dome size. The projector in the original Digistar was housed in a square pyramid-shaped sheathing. When powered on, the four sides at the tip of the pyramid would recede into the housing, exposing the lens and appearing as a cut-off pyramid. As Digistar II was being developed, many planetaria were sold Digistar LEA projectors. The LEA, called Digistar 1.5 by many users, was effectively a prototype of the D2 projector, compatible with Digistar and upgradable to Digistar II. There are no significant differences in performance between the LEA and the true D2. == History == Digistar was the brainchild of Stephen McAllister and Brent Watson, both of whom were long-time amateur astronomers and computer graphics engineers. In 1977, E&S had been consulting with Johnson Space Center regarding training simulators for astronauts. McAllister had been writing proof-of-concept software for this consultation and in summer 1977 entered the data for 400 bright stars and wrote the software to display them. Steve and Brent both originally saw the system's purpose as celestial navigation training. Brent, who had until recently worked at Hansen planetarium, asked his planetarium coworkers what they thought of a potential digital planetarium system, and then Steve and Brent both targeted the system toward planetaria. The primary goal of the planetarium system was to use computer graphics to overcome the limitation of traditional star ball technology that only allowed display of star fields from the point of view of Earth's surface. By using computer graphics the stars could be displayed from viewpoints in space, including simulating the appearance of space flight. Likewise, planets and moons within the Solar System could be displayed accurately for any time in history, from any point of view. The system used the location of real stars from the Yale Bright Star Catalogue, as well as random stars. A laboratory prototype of Digistar was used to generate the star fields and tactical displays in the 1982 science fiction film Star Trek II: The Wrath of Khan. Filming was done directly from the Digistar display in the lab. ILM projected the effort would take two weeks, but in fact it took from late November 1981 until mid-February 1982. The last shot recorded was what became the first entirely computer generated feature film sequence. It was the opening scene of the film, a rotating forward translation through a star field that lasted 3.5 minutes. It was recorded in one take, at a rate of one frame every 3.5 seconds, taking four hours for the shoot. The Digistar team members are credited in the film. After prototyping in labs at Evans and Sutherland the team repeatedly used Salt Lake City's Hansen planetarium to beta test the system at the planetarium at night. The Digistar team performed one week of shows at the planetarium as a fund raiser to benefit the planetarium. The company also later gave the planetarium an improved prototype Digistar to replace "Jake", the planetarium's aging Spitz planetarium projector. The first customer installation was to the newly constructed Universe Planetarium at the Science Museum of Virginia in 1983, the largest planetarium dome in the world at the time, for $595,000. By September 1986 there were four installed Digistars. Even at this point the long-term success of the product was very much in doubt, but as of 2019 Digistar has an installed base of over 550 planetaria. === Versions === Digistar (1983) Digistar II (1995) Digistar 3 (2002) Digistar 4 (2010?) Digistar 5 (2012) Digistar 6 (2016) Digistar 7 (2021) == Hardware == Digistar was driven by a VAX-11/780 minicomputer, with custom graphics hardware related to the E&S Picture System 2. Later versions of Digistar 1 used a DEC MicroVAX 2, driving a custom version of a PS/300. The original Digistar and Digistar 2 had a physical control panel that was used for running the star shows. This control panel was approximately 3' x 4' and contained a keyboard, a 6 DOF joystick, and a large array of back-lit buttons. One button that was used for moving the viewpoint forward in space was labeled "Boldly Go". Later iterations of Digistar replaced the physical control panel with a common graphical user interface. Digistar 3 was the first Digistar system to offer full-dome video in 2002, using six projectors. Digistar 4 was able to cover the dome using only two projectors. == System limitations == Though technologically advanced in its day, and the closest system to true full-dome video at the time of its release, the original Digistar and Digistar 2 are limited to only projecting dots and lines—meaning only wireframe models can be projected. To compensate for this, the projector is capable of defocusing specific models, blurring lines and dots together. An example of this is in the Digistar 2's built-in Milky Way model. The model is a circle of parallel lines that, when defocused, appear as the continuous band of the Milky Way across the sky. On more complex models, especially three-dimensional ones, brightness and details may be lost in this process, so it is not useful in all situations. The Digistar and Digistar 2 also suffer focus limitations. Because they use a single lens to cover the entire dome, it is difficult to gain perfect focus across the dome. Coupled with this, stars greater than a certain brightness are "multihit" points, meaning the projector draws two dots at the given position to accommodate the brightness of the star. Errors in the projector can lead the second dot to be slightly out-of-place with the first one. These two issues together, along with other issues that can occur within the projector's focus system, give the stars a blobby look. Some p
History of machine translation
Machine translation is a sub-field of computational linguistics that investigates the use of software to translate text or speech from one natural language to another. In the 1950s, machine translation became a reality in research, although references to the subject can be found as early as the 17th century. The Georgetown experiment, which involved successful fully automatic translation of more than sixty Russian sentences into English in 1954, was one of the earliest recorded projects. Researchers of the Georgetown experiment asserted their belief that machine translation would be a solved problem within a few years. In the Soviet Union, similar experiments were performed shortly after. Consequently, the success of the experiment ushered in an era of significant funding for machine translation research in the United States. The achieved progress was much slower than expected; in 1966, the ALPAC report found that ten years of research had not fulfilled the expectations of the Georgetown experiment and resulted in dramatically reduced funding. Interest grew in statistical models for machine translation, which became more common and also less expensive in the 1980s as available computational power increased. Although there exists no autonomous system of "fully automatic high quality translation of unrestricted text," there are many programs now available that are capable of providing useful output within strict constraints. Several of these programs are available online, such as Google Translate and the SYSTRAN system that powers AltaVista's BabelFish (which was replaced by Microsoft Bing translator in May 2012). == The beginning == The origins of machine translation can be traced back to the work of Al-Kindi, a 9th-century Arabic cryptographer who developed techniques for systemic language translation, including cryptanalysis, frequency analysis, and probability and statistics, which are used in modern machine translation. The idea of machine translation later appeared in the 17th century. In 1629, René Descartes proposed a universal language, with equivalent ideas in different tongues sharing one symbol. In the mid-1930s the first patents for "translating machines" were applied for by Georges Artsrouni, for an automatic bilingual dictionary using punched tape. Russian Peter Troyanskii submitted a more detailed proposal that included both the bilingual dictionary and a method for dealing with grammatical roles between languages, based on the grammatical system of Esperanto. This system was separated into three stages: stage one consisted of a native-speaking editor in the source language to organize the words into their logical forms and to exercise the syntactic functions; stage two required the machine to "translate" these forms into the target language; and stage three required a native-speaking editor in the target language to normalize this output. Troyanskii's proposal remained unknown until the late 1950s, by which time computers were well-known and utilized. == The early years == The first set of proposals for computer based machine translation was presented in 1949 by Warren Weaver, a researcher at the Rockefeller Foundation, "Translation memorandum". These proposals were based on information theory, successes in code breaking during the Second World War, and theories about the universal principles underlying natural language. A few years after Weaver submitted his proposals, research began in earnest at many universities in the United States. On 7 January 1954 the Georgetown–IBM experiment was held in New York at the head office of IBM. This was the first public demonstration of a machine translation system. The demonstration was widely reported in the newspapers and garnered public interest. The system itself, however, was no more than a "toy" system. It had only 250 words and translated 49 carefully selected Russian sentences into English – mainly in the field of chemistry. Nevertheless, it encouraged the idea that machine translation was imminent and stimulated the financing of the research, not only in the US but worldwide. Early systems used large bilingual dictionaries and hand-coded rules for fixing the word order in the final output which was eventually considered too restrictive in linguistic developments at the time. For example, generative linguistics and transformational grammar were exploited to improve the quality of translations. During this period operational systems were installed. The United States Air Force used a system produced by IBM and Washington University in St. Louis, while the Atomic Energy Commission and Euratom, in Italy, used a system developed at Georgetown University. While the quality of the output was poor it met many of the customers' needs, particularly in terms of speed. At the end of the 1950s, Yehoshua Bar-Hillel was asked by the US government to look into machine translation, to assess the possibility of fully automatic high-quality translation by machines. Bar-Hillel described the problem of semantic ambiguity or double-meaning, as illustrated in the following sentence: Little John was looking for his toy box. Finally he found it. The box was in the pen. The word pen may have two meanings: the first meaning, something used to write in ink with; the second meaning, a container of some kind. To a human, the meaning is obvious, but Bar-Hillel claimed that without a "universal encyclopedia" a machine would never be able to deal with this problem. At the time, this type of semantic ambiguity could only be solved by writing source texts for machine translation in a controlled language that uses a vocabulary in which each word has exactly one meaning. == The 1960s, the ALPAC report and the seventies == Research in the 1960s in both the Soviet Union and the United States concentrated mainly on the Russian–English language pair. The objects of translation were chiefly scientific and technical documents, such as articles from scientific journals. The rough translations produced were sufficient to get a basic understanding of the articles. If an article discussed a subject deemed to be confidential, it was sent to a human translator for a complete translation; if not, it was discarded. A great blow came to machine-translation research in 1966 with the publication of the ALPAC report. The report was commissioned by the US government and delivered by ALPAC, the Automatic Language Processing Advisory Committee, a group of seven scientists convened by the US government in 1964. The US government was concerned that there was a lack of progress being made despite significant expenditure. The report concluded that machine translation was more expensive, less accurate and slower than human translation, and that despite the expenditures, machine translation was not likely to reach the quality of a human translator in the near future. The report recommended, however, that tools be developed to aid translators – automatic dictionaries, for example – and that some research in computational linguistics should continue to be supported. The publication of the report had a profound impact on research into machine translation in the United States, and to a lesser extent the Soviet Union and United Kingdom. Research, at least in the US, was almost completely abandoned for over a decade. In Canada, France and Germany, however, research continued. In the US the main exceptions were the founders of SYSTRAN (Peter Toma) and Logos (Bernard Scott), who established their companies in 1968 and 1970 respectively and served the US Department of Defense. In 1970, the SYSTRAN system was installed for the United States Air Force, and subsequently by the Commission of the European Communities in 1976. The METEO System, developed at the Université de Montréal, was installed in Canada in 1977 to translate weather forecasts from English to French, and was translating close to 80,000 words per day or 30 million words per year until it was replaced by a competitor's system on 30 September 2001. While research in the 1960s concentrated on limited language pairs and input, demand in the 1970s was for low-cost systems that could translate a range of technical and commercial documents. This demand was spurred by the increase of globalisation and the demand for translation in Canada, Europe, and Japan. == The 1980s and early 1990s == By the 1980s, both the diversity and the number of installed systems for machine translation had increased. A number of systems relying on mainframe technology were in use, such as SYSTRAN, Logos, Ariane-G5, and Metal. As a result of the improved availability of microcomputers, there was a market for lower-end machine translation systems. Many companies took advantage of this in Europe, Japan, and the USA. Systems were also brought onto the market in China, Eastern Europe, Korea, and the Soviet Union. During the 1980s there was a lot of activity in MT in Japan especially. With the fifth-generation co
Record sealing
Record sealing is the process of making public records inaccessible to the public. In many cases, a person with a sealed record gains the legal right to deny or not acknowledge anything to do with the arrest and the legal proceedings from the case itself. Records are commonly sealed in a number of situations: Sealed birth records (typically after adoption or determination of paternity) Juvenile criminal records may be sealed Other types of cases involving juveniles may be sealed, anonymized, or pseudonymized ("impounded"); e.g., child sex offense or custody cases Cases using witness protection information may be partly sealed Cases involving trade secrets Cases involving state secrets == Filing under seal in US court == Normally, records should not be filed under seal without a court permission. However, FRCP 5.2 requires that sensitive text – like Social Security number, Taxpayer Identification Number, birthday, bank accounts, and children’s names – should be redacted off the filings made with the court and accompanying exhibits. A person making a redacted filing can file an unredacted copy under seal, or the Court can choose to order later that an additional filing be made under seal without redaction. Alternately, the filing party may ask the court’s permission to file some exhibits completely under seal. When the document is filed "under seal", it should have a clear indication for the court clerk to file it separately – most often by stamping words "Filed Under Seal" on the bottom of each page. Person making filing should also provide instructions to the court clerk that the document needs to be filed "under seal". Courts often have specific requirements to these filings in their Local Rules. == Difference from expungement == Expungement, which is a physical destruction, namely a complete erasure of one's criminal records, and therefore usually carries a higher standard, differs from record sealing, which is only to restrict the public's access to records, so that only certain law enforcement agencies or courts, under special circumstances, will have access to them. A record seal will greatly improve the chance of employment, as employers will not have access to damning records. There are occasions, like expungement, where one can truthfully state under oath that they have never been convicted before. Most of the time, a record seal has more relaxed requirements than an expungement. If an expungement is not allowed with a case, then sealing a record may be the best bet. Different states have different terms for what constitutes sealing of a record. == Cybersecurity incidents involving sealed records == Several cybersecurity incidents have demonstrated that sealed court documents are not always secure in practice, with vulnerabilities and data breaches exposing sensitive information. In January 2021, following the SolarWinds cyber attack, the U.S. Bankruptcy Court United States District Court for the District of Nevada announced that its Case Management/Electronic Case Files CM/ECF system had been potentially compromised. The judiciary stated that additional safeguards were being implemented to protect filings, and that the review of the incident and its impact was ongoing. Reports noted that the breach raised concerns about exposure of highly sensitive and sealed documents submitted through the CM/ECF system. In 2023, security researcher Jason Parker, following a tip from an activist, identified flaws in online court systems that exposed sealed records including confidential testimony and medical records through publicly accessible portals. In 2024, a cyber intrusion targeting attorneys in a civil case involving Representative Matt Gaetz led to the unauthorized access and leak of sealed depositions and related records. The breach exposed confidential testimony and financial records, some of which were later reported by news outlets, raising concerns about the security of electronically stored legal materials and the handling of sealed filings. In 2025, multiple reports confirmed that the federal judiciary's CM/ECF and PACER (law) filing system was compromised, exposing sealed indictments, confidential informant information, and other sensitive filings. Some courts temporarily reverted to paper-based filing to mitigate the risks of further disclosure. The FBI later confirmed that the breach had exposed sealed records, and investigators suspected foreign state actors were involved. == GAO publications referencing sealed records == Closed Criminal Plea and Sentencing Proceedings (1983) – Reviewed Department of Justice policies on closing plea and sentencing hearings. GAO noted that sealed transcripts should be unsealed once the reasons for closure no longer applied. Information on Plea Agreements and Settlements in Defense Procurement Fraud Cases (1992) – Examined outcomes of procurement fraud prosecutions. GAO observed that in some instances the results were sealed from public access. Military Recruiting: More Needs to Be Done to Better Screen Applicants and Detect Fraud (1999) – Investigated fraudulent enlistments in the armed forces. The report highlighted that sealed juvenile records often prevented recruiters from discovering prior offenses. Social Security Numbers: Governments Could Do More to Reduce Display in Public Records (2004) – Analyzed risks associated with SSN availability in state and local records. GAO pointed out that some categories of records, such as adoption proceedings, were sealed and less likely to expose identifiers. Social Security Numbers: Stronger Safeguards Needed to Protect Privacy (2005 testimony) – Testimony before Congress reiterating concerns over SSN exposure in public records, while noting that sealed categories (e.g., adoption) were exceptions. U.S. Supreme Court: Policies and Perspectives on Video and Audio Coverage of Appellate Court Proceedings (2016) – Surveyed appellate court policies on courtroom media coverage. The report acknowledged distinctions between public filings, confidential submissions, and sealed materials. Evictions: National Data Are Limited and Challenging to Collect (2024) – Examined nationwide eviction data. GAO reported that in some states eviction records may be sealed or expunged, limiting researchers' ability to compile datasets. DOD Fraud Risk Management: Enhanced Data and Collaboration Could Improve Efforts (2024) – Reviewed Department of Defense fraud-risk management. GAO noted that some adjudicative records in its dataset were sealed, restricting completeness of oversight data.