A secure element (SE) is a secure operating system (OS) in a tamper-resistant processor chip or secure component. It can protect assets (root of trust, sensitive data, keys, certificates, applications) against high-level software and hardware attacks. Applications that process this sensitive data on an SE are isolated and so operate within a controlled environment not affected by software (including possible malware) found elsewhere on the OS. The hardware and embedded software meet the requirements of the Security IC Platform Protection Profile [PP 0084] including resistance to physical tampering scenarios described within it. More than 96 billion secure elements were produced and shipped between 2010 and 2021. SEs exist in various form factors, as devices such as smart cards, UICCs, or smart microSD cards, or embedded, or integrated, as parts of larger devices. SEs are an evolution of the chips in earlier smart cards, which have been adapted to suit the needs of numerous use cases, such as smartphones, tablets, set-top boxes, wearables, connected cars, and other internet of things (IoT) devices. The technology is widely used by technology firms such as Oracle, Apple and Samsung. SEs provide secure isolation, storage and processing for applications (called applets) they host while being isolated from the external world (e.g. rich OS and application processor when embedded in a smartphone) and from other applications running on the SE. Java Card and MULTOS are the most deployed standardized multi-application operating systems currently used to develop applications running on SEs. Since 1999, GlobalPlatform has been the body responsible for standardizing secure element technologies to support a dynamic model of application management in a multi-actor model. GlobalPlatform also runs Functional and Security Certification programmes for secure elements, and hosts a list of Functional Certified and Security Certified products. GlobalPlatform technology is also embedded in other standards such as ETSI SCP (now SET) since release 7. A Common Criteria Secure Element Protection Profile has been released targeting EAL4+ level with ALC_DVS.2 and AVA_VAN.5 extension to standardize the security features of a secure element across markets.
Hard sigmoid
In artificial intelligence, especially computer vision and artificial neural networks, a hard sigmoid is non-smooth function used in place of a sigmoid function. These retain the basic shape of a sigmoid, rising from 0 to 1, but using simpler functions, especially piecewise linear functions or piecewise constant functions. These are preferred where speed of computation is more important than precision. == Examples == The most extreme examples are the sign function or Heaviside step function, which go from −1 to 1 or 0 to 1 (which to use depends on normalization) at 0. Other examples include the Theano library, which provides two approximations: ultra_fast_sigmoid, which is a multi-part piecewise approximation and hard_sigmoid, which is a 3-part piecewise linear approximation (output 0, line with slope 0.2, output 1).
Hindley–Milner type system
A Hindley–Milner (HM) type system is a classical type system for the lambda calculus with parametric polymorphism. It is also known as Damas–Milner or Damas–Hindley–Milner. It was first described by J. Roger Hindley and later rediscovered by Robin Milner. Luis Damas contributed a close formal analysis and proof of the method in his PhD thesis. Among HM's more notable properties are its completeness and its ability to infer the most general type of a given program without programmer-supplied type annotations or other hints. Algorithm W is an efficient type inference method in practice and has been successfully applied on large code bases, although it has a high theoretical complexity. HM is preferably used for functional programming languages. It was first implemented as part of the type system of the programming language ML. Since then, HM has been extended in various ways, most notably with type class constraints like those in Haskell. == Introduction == As a type inference method, Hindley–Milner is able to deduce the types of variables, expressions and functions from programs written in an entirely untyped style. Being scope sensitive, it is not limited to deriving the types only from a small portion of source code, but rather from complete programs or modules. Being able to cope with parametric types, too, it is core to the type systems of many functional programming languages. It was first applied in this manner in the ML programming language. The origin is the type inference algorithm for the simply typed lambda calculus that was devised by Haskell Curry and Robert Feys in 1958. In 1969, J. Roger Hindley extended this work and proved that their algorithm always inferred the most general type. In 1978, Robin Milner, independently of Hindley's work, provided an equivalent algorithm, Algorithm W. In 1982, Luis Damas finally proved that Milner's algorithm is complete and extended it to support systems with polymorphic references. === Monomorphism vs. polymorphism === In the simply typed lambda calculus, types T are either atomic type constants or function types of form T → T {\displaystyle T\rightarrow T} . Such types are monomorphic. Typical examples are the types used in arithmetic values: 3 : N u m b e r a d d 3 4 : N u m b e r a d d : N u m b e r → N u m b e r → N u m b e r {\displaystyle {\begin{array}{ll}3&:{\mathtt {Number}}\\{\mathtt {add}}\ 3\ 4&:{\mathtt {Number}}\\{\mathtt {add}}&:{\mathtt {Number}}\rightarrow {\mathtt {Number}}\rightarrow {\mathtt {Number}}\end{array}}} Contrary to this, the untyped lambda calculus is neutral to typing at all, and many of its functions can be meaningfully applied to all type of arguments. The trivial example is the identity function i d ≡ λ x . x {\displaystyle {\mathtt {id}}\equiv \lambda x.x} which simply returns whatever value it is applied to. Less trivial examples include parametric types like lists. While polymorphism in general means that operations accept values of more than one type, the polymorphism used here is parametric. One finds the notation of type schemes in the literature, too, emphasizing the parametric nature of the polymorphism. Additionally, constants may be typed with (quantified) type variables. For example, the following type schemes quantify universally over α {\displaystyle \alpha } , meaning that they are true for all possible α {\displaystyle \alpha } : c o n s : ∀ α . α → L i s t α → L i s t α n i l : ∀ α . L i s t α i d : ∀ α . α → α {\displaystyle {\begin{array}{ll}{\mathtt {cons}}&:\forall \alpha .\alpha \rightarrow {\mathtt {List}}\ \alpha \rightarrow {\mathtt {List}}\ \alpha \\{\mathtt {nil}}&:\forall \alpha .{\mathtt {List}}\ \alpha \\{\mathtt {id}}&:\forall \alpha .\alpha \rightarrow \alpha \end{array}}} Polymorphic types can become monomorphic by consistent substitution of their variables. Examples of monomorphic instances are: i d ′ : S t r i n g → S t r i n g n i l ′ : L i s t N u m b e r {\displaystyle {\begin{array}{ll}{\mathtt {id}}'&:{\mathtt {String}}\rightarrow {\mathtt {String}}\\{\mathtt {nil}}'&:{\mathtt {List}}\ {\mathtt {Number}}\end{array}}} More generally, types are polymorphic when they contain type variables, while types without them are monomorphic. Contrary to the type systems used for example in Pascal (1970) or C (1972), which only support monomorphic types, HM is designed with emphasis on parametric polymorphism. The successors of the languages mentioned, like C++ (1985), focused on different types of polymorphism, namely subtyping in connection with object-oriented programming and overloading. While subtyping is incompatible with HM, a variant of systematic overloading is available in the HM-based type system of Haskell. === Let-polymorphism === When extending the type inference for the simply-typed lambda calculus towards polymorphism, one has to decide whether assigning a polymorphic type not only as type of an expression, but also as the type of a λ-bound variable is admissible. This would allow the generic identity type to be assigned to the variable 'id' in: (λ id . ... (id 3) ... (id "text") ... ) (λ x . x) Allowing this gives rise to the polymorphic lambda calculus; however, type inference in this system is not decidable. Instead, HM distinguishes variables that are immediately bound to an expression from more general λ-bound variables, calling the former let-bound variables, and allows polymorphic types to be assigned only to these. This leads to let-polymorphism where the above example takes the form let id = λ x . x in ... (id 3) ... (id "text") ... which can be typed with a polymorphic type for 'id'. As indicated, the expression syntax is extended to make the let-bound variables explicit, and by restricting the type system to allow only let-bound variable to have polymorphic types, while the parameters in lambda-abstractions must get a monomorphic type, type inference becomes decidable. == Overview == The remainder of this article proceeds as follows: The HM type system is defined. This is done by describing a deduction system that makes precise what expressions have what type, if any. From there, it works towards an implementation of the type inference method. After introducing a syntax-driven variant of the above deductive system, it sketches an efficient implementation (algorithm J), appealing mostly to the reader's metalogical intuition. Because it remains open whether algorithm J indeed realises the initial deduction system, a less efficient implementation (algorithm W), is introduced and its use in a proof is hinted. Finally, further topics related to the algorithm are discussed. The same description of the deduction system is used throughout, even for the two algorithms, to make the various forms in which the HM method is presented directly comparable. == The Hindley–Milner type system == The type system can be formally described by syntax rules that fix a language for the expressions, types, etc. The presentation here of such a syntax is not too formal, in that it is written down not to study the surface grammar, but rather the depth grammar, and leaves some syntactical details open. This form of presentation is usual. Building on this, typing rules are used to define how expressions and types are related. As before, the form used is a bit liberal. === Syntax === The expressions to be typed are exactly those of the lambda calculus extended with a let-expression as shown in the adjacent table. Parentheses can be used to disambiguate an expression. The application is left-binding and binds stronger than abstraction or the let-in construct. Types are syntactically split into two groups, monotypes and polytypes. ==== Monotypes ==== Monotypes always designate a particular type. Monotypes τ {\displaystyle \tau } are syntactically represented as terms. Examples of monotypes include type constants like i n t {\displaystyle {\mathtt {int}}} or s t r i n g {\displaystyle {\mathtt {string}}} , and parametric types like M a p ( S e t s t r i n g ) i n t {\displaystyle {\mathtt {Map\ (Set\ string)\ int}}} . The latter types are examples of applications of type functions, for example, from the set { M a p 2 , S e t 1 , s t r i n g 0 , i n t 0 , → 2 } {\displaystyle \{{\mathtt {Map^{2},\ Set^{1},\ string^{0},\ int^{0}}},\ \rightarrow ^{2}\}} , where the superscript indicates the number of type parameters. The complete set of type functions C {\displaystyle C} is arbitrary in HM, except that it must contain at least → 2 {\displaystyle \rightarrow ^{2}} , the type of functions. It is often written in infix notation for convenience. For example, a function mapping integers to strings has type i n t → s t r i n g {\displaystyle {\mathtt {int}}\rightarrow {\mathtt {string}}} . Again, parentheses can be used to disambiguate a type expression. The application binds stronger than the infix arrow, which is right-binding. Type variables are admitted as monotypes. Monotypes are not to be confused with monomorphic types, which exc
Nike+iPod
The Nike+iPod Sport Kit is an activity tracker device, developed by Nike, Inc., which measures and records the distance and pace of a walk or run. The Nike+iPod consists of a small transmitter device attached to or embedded in a shoe, which communicates with either the Nike+ Sportband, or a receiver plugged into an iPod Nano. It can also work directly with a 2nd Generation iPod Touch (or higher), iPhone 3GS, iPhone 4, iPhone 4S, iPhone 5, The Nike+iPod was announced on May 23, 2006. On September 7, 2010, Nike released the Nike+ Running App (originally called Nike+ GPS) on the App Store, which used a tracking engine powered by MotionX that does not require the separate shoe sensor or pedometer. This application works using the accelerometer and GPS of the iPhone and the accelerometer of the iPod Touch, which does not have a GPS chip. Nike+Running is compatible with the iPhone 6 and iPhone 6 Plus down to iPhone 3GS and iPod touch. On June 21, 2012, Nike released Nike+ Running App for Android. The current app is compatible with all Android phones running 4.0.3 and up. == Overview == The sensor and iPod kit were revealed on May 20, 2006. The kit stores information such as the elapsed time of the workout, the distance traveled, pace, and calories burned by the individual. Nike+ was a collaboration between Nike and Apple; the platform consisted of an iPod, a wireless chip, Nike shoes that accepted the wireless chip, an iTunes membership, and a Nike+ online community. iPods using Nike iPod require a sensor and remote. The next upgraded product was the Sportband kit, which was announced in April 2008. The kit allows users to store run information without the iPod Nano. The Sportband consists of two parts: a rubber holding strap which is worn around the wrist, and a receiver which resembles a USB key-disk. The receiver displays information comparable to that of the iPod kit on the built-in display. After a run, the receiver can be plugged straight into a USB port and the software will upload the run information automatically to the Nike+ website. As of August 2008 "Nike+iPod for the Gym" launched, allowing users to record their cardio workouts directly to their iPods. No Sport kit or shoe sensor is required; all that is needed is a compatible iPod (1st–6th generation iPod Nano or 2nd/3rd gen iPod Touch) and an enabled piece of cardio equipment. As of March 2009, the seven largest commercial equipment providers were shipping enabled equipment (Life Fitness, Technogym, Precor USA, Star Trac, Cybex International, Matrix Fitness and Free Motion). The models of compatible cardio equipment include treadmills, stationary bicycles, stair climbers, ellipticals, and others such as Precor's Adaptive Motion Trainer. Once the user syncs an iPod with iTunes, the cardio workouts are automatically stored at Nikeplus.com, where each workout is visualized and tracked based on the number of calories burned. The calories are converted to "CardioMiles", at a ratio of 100:1, allowing cardio users to take full advantage of all the tools and features of Nikeplus.com, and allow them to engage in challenges with other runners, walkers and cardio users, using a common currency. With the release of the second-generation iPod Touch in 2008, Apple Inc. included a built-in ability to receive Nike+ signals, which allowed the iPod to connect directly to the wireless sensor thus eliminating the need for an external receiver to be connected. Apple also added this capability to the iPhone 3GS (released 2009), iPhone 4 (2010), and third-generation iPod Touch (2009). Those devices use their Broadcom Bluetooth chipset to receive the signals. On June 7, 2010, Polar and Nike introduced the Polar WearLink+ that works with Nike+. This new product works with the Nike+ SportBand and the fifth generation iPod nano in conjunction with the Nike+ iPod Sport Kit. Polar WearLink+ that works with Nike+ communicates directly with the fifth generation iPod nano and Nike+ SportBand using a proprietary digital protocol but it is dual-mode so it is also compatible with most Polar training computers (all those using 5 kHz analog transmission technology). Nike+ had 18 million global users as of April 2013. One year later, Nike updated the number of global users to 28 million. In iOS 6.1.2 (and possibly higher), a hole in the compatibility for the app has allowed jailbroken iPad users to use the native Nike + iPod iPhone and iPod app by moving the app bundle and setting permissions for the app. On April 30, 2018, Nike retired services for legacy Nike wearable devices, such as the Nike+ FuelBand and the Nike+ SportWatch GPS, and previous versions of apps, including Nike Run Club and Nike Training Club version 4.X and lower. Likewise, Nike no longer supported the Nike+ Connect software that transferred data to a NikePlus Profile or the Nike+ Fuel/FuelBand and Nike+ Move apps. == Sports kit equipment == The kit consists of two pieces: a piezoelectric sensor with a Nordic Semiconductor nRF2402 transmitter that is mounted under the inner sole of the shoe and a receiver that connects to the iPod. They communicate using a 2.4 GHz wireless radio and use Nordic Semiconductor's "ShockBurst" network protocol. The wireless data is encrypted in transit, but some uniquely identifying data is sent in the plain. The wireless protocol was reverse engineered and documented by Dmitry Grinberg in 2011. Nike recommends that the shoe be a Nike+ model with a special pocket in which to place the device. Nike has released the sensor for individual sale meaning that consumers no longer have to purchase the whole set (the iPod receiver and sensor). As the sensor battery cannot be replaced, a new one must be purchased every time the battery runs out. Aftermarket solutions are available to users who do not want to use shoes with built-in or hand-made pockets for the foot sensor, such as shoe pouches and containment devices designed to affix the sensor against the shoe laces. No matter how the sensor is integrated with the user's shoes, care must be taken that it is firmly fixed in place and will not jerk around while in use, which would degrade the accuracy. == Sports kit usage == The Sports Kit can be used to track running, which it refers to as "workouts". New workouts are started by plugging the receiving unit into the iPod, then navigating through the iPod menu system. The user chooses a goal for the workout, which might be to cover a specific distance, or burn a number of calories, or work out for a specified time. A workout can also be started without a goal, which is called a "Basic Workout". When the workout goal has been set, the receiver seeks the sensor, possibly asking the user to "walk around to activate [the] sensor". The user then must press the center button on the iPod to begin the workout. Audio feedback is provided in the user's choice of generic male or female voice by the iPod over the course of the workout, depending on the type of workout chosen. For goal-oriented workouts, the feedback will correspond to significant milestones toward the goal. In a distance workout, for example, the audio feedback will inform the user as each mile or kilometer has been completed, as well as the half-way point of the workout, and a countdown of four 100-meter increments at the end of the workout. The iPod's control wheel functions change slightly during a workout. The Pause button now not only pauses the music but also the workout. Similarly, the Menu button is used to access the controls to end the workout. The Forward and Back buttons are unchanged, performing audio track skip and reverse functions. The Center button has two functions: audio feedback about the current distance, time, and pace are provided when the button is tapped once, while if the button is held down the iPod skips to the "PowerSong" - an audio track chosen by the user, generally intended for motivation. In addition to the in-workout audio feedback, there are pre-recorded congratulations provided by Lance Armstrong, Tiger Woods, Joan Benoit Samuelson, and Paula Radcliffe whenever a user achieves a personal best (such as fastest mile, fastest 5K, fastest 10K, longest run yet) or reaches certain long-term milestones (such as 250 miles, 500 kilometers). This "celebrity feedback" is heard after the usual end-of-run statistics. While the Sports Kit can be used immediately after purchase, it will report more accurate results if it is calibrated before the first usage and then regularly afterwards. For calibration, the user finds a fixed known distance of at least 0.25 mile or 400 meters and then sets the Nike+ to calibration mode for the walk or run over that distance. When the walk or run is complete, the device calibrates itself and future workout reporting will reflect statistics closer to that individual user's workout style. Consumer Reports magazine tested the device and found it accurate as long as you keep an even pace. In workouts with varied pa
Information strategist
An information strategist analyses the information flow within an organisation and directs its information resources to better serve the organisation's strategic goals. They work with information technology or within a corporate library to direct high quality information from a variety of sources to users, based upon their profiles and needs. In warfare, information strategists not only seek to improve information flows for their own side but also try to disrupt the information flows of the enemy in order to demoralize and deceive them.
Optical granulometry
Optical granulometry is the process of measuring the different grain sizes in a granular material, based on a photograph. Technology has been created to analyze a photograph and create statistics based on what the picture portrays. This information is vital in maintaining machinery in various trades worldwide. Mining companies can use optical granulometry to analyze inactive or moving rock to quantify the size of these fragments. Forestry companies can zero in on wood chip sizes without stopping the production process, and minimize sizing errors. With more photoanalysis technologies being produced, mining companies have shown an increased interest in these types of systems because of their ability to maintain efficiency throughout the mining process. Companies are saving millions of dollars annually because of this new technology, and are cutting back on maintenance costs on equipment. In order for optical granulometry to be completely successful, an accurate photo must be taken – under sufficient lighting, and using proper technology – to obtain quantified results. If these requirements are met, an image analysis system can be implemented. == The process == Software uses four basic steps in determining the average size of material: See the Wikipedia article on Photoanalysis to see how mining, forestry and agricultural companies are using this technology to improve quality control techniques. == Smartphone-based, segmentation-free estimation of grain size distribution == Recently, a methodology has emerged by which soil grain size distribution can be inferred from optical images acquired with commodity smartphones by training convolutional neural networks to predict parameters of the distribution curve directly from the image, without explicit image segmentation . In this approach, a standardized image of a soil surface is captured under controlled conditions, preprocessed to reduce device-specific variability, and passed to a regression model that outputs the parameters of a cumulative distribution function e.g., a two-parameter Weibull curve. The resulting distribution can be used to derive geotechnical descriptors and class boundaries.
Technical data management system
A technical data management system (TDMS) is a document management system (DMS) pertaining to the management of technical and engineering drawings and documents. Often the data are contained in 'records' of various forms, such as on paper, microfilms or digital media. Hence technical data management is also concerned with record management involving technical data. Technical document management systems are used within large organisations with large scale projects involving engineering. For example, a TDMS can be used for integrated steel plants (ISP), automobile factories, aero-space facilities, infrastructure companies, city corporations, research organisations, etc. In such organisations, technical archives or technical documentation centres are created as central facilities for effective management of technical data and records. TDMS functions are similar to that of conventional archive functions in concepts, except that the archived materials in this case are essentially engineering drawings, survey maps, technical specifications, plant and equipment data sheets, feasibility reports, project reports, operation and maintenance manuals, standards, etc. Document registration, indexing, repository management, reprography, etc. are parts of TDMS. Various kinds of sophisticated technologies such as document scanners, microfilming and digitization camera units, wide format printers, digital plotters, software, etc. are available, making TDMS functions an easier process than previous times. == Constituents of a technical data management system == Technical data refers to both scientific and technical information recorded and presented in any form or manner (excluding financial and management information). A Technical Data Management System is created within an organisation for archiving and sharing information such as technical specifications, datasheets and drawings. Similar to other types of data management system, a Technical Data Management System consists of the 4 crucial constituents mentioned below. === Data planning === Data plans (long-term or short-term) are constructed as the first essential step of a proper and complete TDMS. It is created to ultimately help with the 3 other constituents, data acquisition, data management and data sharing. A proper data plan should not exceed 2 pages and should address the following basics: Types of data (samples, experiment results, reports, drawings, etc.) and metadata (data that summarizes and describes other data. In this case, it refers to details such as sample sizes, experiment conditions and procedures, dates of reports, explanations of drawings, etc.) Means of researches and collections of data (field works, experiments in production lines, etc.) Costs of researches Policies for access, sharing (re-use within the organisation and re-distribution to the public) Proposals for archiving data and maintaining access to it === Data acquisition === Raw data is collected from primary sites of the organisations through the use of modern technologies. Please reference the table below for examples. The data collected is then transferred to technical data centres for data management. === Data management === After data acquisition, data is sorted out, whilst useful data is archived, unwanted data is disposed. When managing and archiving data, the features below of the data are considered. Names, labels, values and descriptions for variables and records. (In the case of TDMS, one example is names of equipments on an equipment datasheet) Derived data from the original data, with code, algorithm or command file used to create them. (In the case of TDMS, one example is an expectation report derived from the analysis of an equipment datasheet) Metadata associates with the data being archived === Data sharing === Archived and managed data are accessible to rightful entities. A proper and complete TDMS should share data to a suitable extent, under suitable security, in order to achieve optimal usage of data within the organisation. It aims for easy access when reused by other researchers and hence it enhances other research processes. Data is often referred in other tests and technical specifications, where new analysis is generated, managed and archived again. As a result, data is flowing within the organisation under effective management through the use of TDMS. == Advantages and disadvantages of usage of technical data management systems == There are strengths and weakness when using technical data management systems (TDMS) to archive data. Some of the advantages and disadvantages are listed below. === Advantages === ==== 1. Faster and easier data management ==== Since TDMS is integrated into the organisation's systems, whenever workers develop data files (SolidWorks, AutoCAD, Microsoft Word, etc.), they can also archive and manage data, linking what they need to their current work, at the same time they can also update the archives with useful data. This speeds up working processes and makes them more efficient. ==== 2. Increased security ==== All data files are centralized, hence internal and external data leakages are less likely to happen, and the data flow is more closely monitored. As a result, data in the organisation is more secured. ==== 3. Increased collaboration within the organisation ==== Since the data files are centralized and the data flow within the organisation increases, researchers and workers within the organisation are able to work on joint projects. More complex tasks can be performed for higher yields. ==== 4. Compatible to various formats of data ==== TDMS is compatible to many formats of data, from basic data like Microsoft Words to complex data like voice data. This enhances the quality of the management of data archived. === Disadvantages === ==== 1. Higher financial costs ==== Implementing TDMS into the organisation's systems involves monetary costs. Maintenance costs certain amount of human resources and money as well. These resources involve opportunity costs as they can be utilized in other aspects. ==== 2. Lower stability ==== Since TDMS manages and centralizes all the data the organisation processes, it links the working processes within the whole organisation together. It also increases the vulnerability of the organisation data network. If TDMS is not stable enough or when it is exposed to hacker and virus attacks, the organisation's data flow might shut down completely, affecting the work in an organisation-wide scale and leading to a lower stability as results. == Comparison between traditional data management approaches and technical data management systems == Test engineers and researchers are facing great challenges in turning complex test results and simulation data into usable information for higher yields of firms. These challenges are listed below. Increase in complication of designs Reduced in time and budgets available Higher quality is demanded === Traditional data management approaches === Many organisations are still applying the conventional file management systems, due to the difficulty in building a proper and complete archives for data management. The first approach is the simple file-folder system. This costs the problem of ineffectiveness as workers and researchers have to manually go through numerous layers of systems and files for the target data. Moreover, the target data may contain files with different formats and these files may not be stored in the same machine. These files are also easily lost if renamed or moved to another location. The second approach is conventional databases such as Oracle. These databases are capable of enabling easy search and access of data. However, a great drawback is that huge effort for preparing and modeling the data is required. For large-scale projects, huge monetary costs are induced, and extra IT human resources must be employed for constant handling, expanding and maintaining the inflexible system, which is custom for specific tasks, instead of all tasks. In the long-term, it is not cost-effective. === Technical data management systems (TDMS) === TDMS is developed based on 3 principles, flexible and organized file storage, self-scaling hybrid data index, and an interactive post-processing environment. The system in practical, mainly consists of 3 components, data files with essential and relevant Metadata, data finders for organizing and managing data regardless of files formats, and, a software of searching, analyzing and reporting. With metadata attached to original data files, the data finder can identify different related data files during searches, even if they are in different file formats. TDMS hence allows researchers to search for data like browsing the Internet. Last but not least, it can adapt to changes and update itself according to the changes, unlike databases. == Comparison between strong information systems and weak information systems == Complex organizations may need large amounts