VueScan is a computer program for image scanning, especially of photographs, including negatives. It supports optical character recognition (OCR) of text documents. The software can be downloaded and used free of charge, but adds a watermark on scans until a license is purchased. == Purpose == VueScan is intended to work with a large number of image scanners, excluding specialised professional scanners such as drum scanners, on many computer operating systems (OS), even if drivers for the scanner are not available for the OS. These scanners are supplied with device drivers and software to operate them, included in their price. A 2014 review considered that the reasons to purchase VueScan are to allow older scanners not supported by drivers for newer operating systems to be used in more up-to-date systems and for better scanning and processing of photographs (prints; also slides and negatives when supported by scanners) than is afforded by manufacturers' software. The review did not report any advantages to VueScan's processing of documents over other software. The reviewer considered VueScan comparable to SilverFast, a similar program, with support for some specific scanners better in one or the other. Vuescan supports more scanners, with a single purchase giving access to the full range of both film and flatbed scanners, and costs less. The VueScan program can be used with its own drivers or with drivers supplied by the scanner manufacturer, if supported by the operating system. VueScan drivers can also be used without the VueScan program by application software that supports scanning directly, such as Adobe Photoshop, again enabling the use of scanners without current manufacturers' drivers. In 2019 when Apple released macOS Catalina, they removed support for running 32-bit programs, including 32-bit drivers for scanning equipment. In response, Hamrick released VueScan 9.7, effectively saving thousands of scanners from being rendered obsolete. == Overview == VueScan enables the user to modify and fine-tune the scanning parameters. The program uses its own independent method to interface with scanner hardware, and can support many older scanners under computer operating systems for which drivers are not available, allowing old scanners to be used with newer platforms that do not otherwise support them. VueScan supports an increasing number of scanners and digital cameras; 2,400 on Windows, 2,100 on Mac OS X and 1,900 on Linux in 2018. VueScan is supplied as one downloadable file for each operating system, which supports the full range of scanners. Without the purchase of a license, the program runs in fully functional demonstration mode, identical to Professional mode, except that watermarks are superimposed on saved and printed images. Purchase of a license removes the watermark. A standard license allows updates for one year; a professional license allows unlimited updates and provides some additional features. VueScan supports optical character recognition (OCR), with English included, and 32 additional language packages available on its website. In September 2011, VueScan co-developer Ed Hamrick said that he was selling US$3 million per year of VueScan licenses.
Differentiable imaging
Differentiable imaging is a method within computational imaging that incorporates differentiable programming to design imaging systems. It treats the entire imaging process - from light passing through optical components to the numerical reconstruction—as a differentiable programming problem. This approach links optical hardware with numerical reconstruction, enabling joint optimization of both parts through differentiable programming. Differentiable imaging additionally extends the scope of computational imaging beyond image reconstruction, such as by aiding in characterization of optical components. == Background == Computational imaging combines optical hardware and computational algorithms to capture and reconstruct information that conventional imaging system cannot. This is achieved from a combination of the imaging system and the software used in the image reconstruction. Since the captured information may not directly show the image of the target, these systems often rely on numerical models that describe how light encodes the target. In practice, such models may deviate from the physical systems due to uncertainties such as noise, misalignments, manufacturing imperfections, environmental variations, etc. These uncertainties can cause a mismatch between the physical system and its numerical model, which may degrade reconstruction quality and limit the effectiveness of the hardware–software co-design. Uncertainty quantification is also studied in other hybrid physical–numerical systems, such as digital twin. While numerical modeling imaging systems date back to the several decades, such as the multislice method in electron microscopy or X-Ray nanotomography, differentiable imaging emphasizes jointly modeling uncertainties and solving inverse problems with image reconstruction simultaneously. Differentiable imaging transforms the traditional encoding model y = f ( x ) {\textstyle y=f(x)} into a more comprehensive formulation y = f ( x , θ ) {\textstyle y=f(x,\theta )} , where θ {\displaystyle \theta } represents a parameter set of mismatches between physical systems and numerical models. The forward model captures the entire imaging pipeline through a series of interconnected component functions: y = f ( x , θ ) , f = f n o i s e ∘ f c ∘ f o c ∘ f x ∘ f o i ∘ f i , {\displaystyle y=f(x,\theta ),\qquad f=f_{noise}\circ f_{c}\circ f_{oc}\circ f_{x}\circ f_{oi}\circ f_{i},} where the function composition operator ∘ {\displaystyle \circ } connects each system component, and θ = { θ c , θ o c , … } {\displaystyle \theta =\{\theta _{c},\theta _{oc},\ldots \}} encompasses uncertainty system parameters. Each component corresponds to specific physical processes within the imaging system, from illumination through object interactions to sensor behavior and noises. This forward model enables the formulation of an inverse problem that simultaneously optimizes system parameters while reconstructing images: x ∗ , θ ∗ = argmin x , θ L ( f ( x , θ ) , y ) + ∑ n = 1 N β n R n ( x ) {\displaystyle x^{},\theta ^{}={\text{argmin}}_{x,\theta }{\mathcal {L}}(f(x,\theta ),y)+\sum _{n=1}^{N}\beta _{n}{\mathcal {R}}_{n}(x)} s . t . x ∈ Ω x , θ ∈ Ω θ {\displaystyle s.t.\quad x\in \Omega _{x},\theta \in \Omega _{\theta }} Here, L ( f ( x , θ ) , y ) {\displaystyle {\mathcal {L}}(f(x,\theta ),y)} represents the fidelity term that quantifies the discrepancy between the model predictions and measured data. The whole process of the y = f ( x , θ ) {\displaystyle y=f(x,\theta )} is constructed as a computer graph based on differentiable programming, and the inverse problem is solved with gradient based algorithm, while the gradient is calculated with automatic differentiation. == Applications == One application of differentiable imaging is uncertainty management, which seeks to quantify and mitigate the impact of factors induce reality-numerical mismatch. Explicitly accounting for uncertainties can improve reconstruction accuracy and system robustness. Examples include: Model-related uncertainties: unknown or unmeasurable variables—for instance, optical system quantities that differ from the design specifications Data and system uncertainties: artifacts introduced during image acquisition, such as low-quality data, noise, or hardware imperfections Manufacturing uncertainties: variability in the production of imaging hardware—such as slight deviations in lens curvature or sensor alignment—that alters the physical system's behavior
Construction robots
Construction robots are a subset of industrial robots used for building and infrastructure construction on site, or in the production of materials and components offsite. A 2021 survey said 55% of construction companies in the United States, Europe, and China used robots in some form. This figure, however, reflects reported use across the construction value chain rather than widespread deployment of robots on active construction sites. Real-world adoption remains limited, with many robotic systems confined to pilot projects, controlled environments, or specific task applications rather than continuous on-site construction use. One of the main challenges in deploying robots on construction sites is the unstructured and variable nature of the environment, which differs fundamentally from controlled factory settings where industrial robots have traditionally operated. Some robots currently deployed on job sites assist with physically demanding or repetitive tasks: excavating, lifting heavy materials, surveying, laying out markers, tying rebar, and installing drywall. More advanced systems are being developed for exterior finishing, steel placement, masonry, and reinforced concrete work. In practice, rather than autonomous systems performing core building tasks, the most widely adopted robot applications on construction sites involve technologies such as aerial drones (or, less frequently, robot 'dogs' - for example, Boston Dynamics' Spot - or humanoid robots) used for surveying, inspection, and progress monitoring (the robots typically carry video and/or 360-degree cameras, LiDar scanners or other data capture devices, with data analysed using artificial intelligence and machine learning). Some emerging systems are designed as multifunctional construction robots, integrating multiple tools and capabilities within a single robotic platform to perform different stages of the construction process. These systems aim to improve operational flexibility and increase automation in complex construction environments. Experimental projects using robotic construction technologies and additive manufacturing have been demonstrated in several countries as part of broader efforts to industrialize the construction sector and improve productivity through automation and digitalization. == Features == Construction robots are generally required to meet the following criteria: Mobility: the ability to navigate around a construction site, including uneven terrain and confined spaces. Adaptability: the ability to handle components of variable size, weight, and shape. Environmental awareness: the ability to sense and respond to changing on-site conditions. Interactivity: the ability to operate alongside human workers and other equipment. Multitasking: the ability to perform several different operations within a single deployment. == Capabilities == Construction robots have been developed and tested for a range of on-site tasks, including: Progress monitoring — robots equipped with cameras and sensors can track construction progress and identify deviations from plans. Inspection — robots are used to investigate infrastructure at dangerous or inaccessible locations, reducing risk to human workers and eliminating human error. Wall construction — robotic systems can lay bricks and blocks with greater speed and consistency than manual labour. Earthmoving and material handling — autonomous excavators and haul trucks use GPS, lidar, and motion sensors to perform digging, trenching, and loading tasks with minimal human input. Grading and dozing — autonomous bulldozers use GPS, gyroscopes, and laser sensors to control blade angle and depth, improving surface finish accuracy and reducing material overuse. 3D printing — additive manufacturing systems can construct walls and structural elements directly from digital models. == Notable construction-related activities undertaken by robots == The distribution of robotic applications in construction varies across the project lifecycle. Most applications are concentrated in structural construction tasks such as masonry, concrete work, and assembly, while other phases, including planning, maintenance, and demolition, remain less represented. === Automated building systems === The Nisseki Yokohama Building (also known as Rail City Yokohama), a 30-storey office building in Yokohama, Japan, was constructed between 1994 and 1997 using the SMART system (Shimizu Manufacturing system by Advanced Robotics Technology), developed by Shimizu Corporation and a consortium of seven other Japanese companies. The system used automated horizontal hoists and vertical lifts to position steel beams, columns, precast concrete floor slabs, and prefabricated facade panels, with welding robots connecting structural elements under laser-guided precision. Each component was tracked by barcode to monitor progress and coordinate just-in-time delivery of materials. Obayashi Corporation developed the Advanced Building Construction System (ABCS), a similar automated platform used in several high-rise projects in Japan in the 1990s, including the NEC Head Office in Kanagawa (1997–2000). === Progress monitoring, inspection === Boston Dynamics' Spot was used in February 2024 to inspect sections of the M5 motorway in England for National Highways. A £15,000 humanoid robot (a G1 model from Chinese manufacturer Unitree) was deployed to capture 360-degree imagery and progress reports to support health and safety monitoring and reporting for UK contractor Tilbury Douglas in April 2026. In the US, Virginia Tech's ARCADE research lab is developing MARIO (Multi-Agent Robotic system for Inspection On-site), a heterogenous robotic system deploying multiple robots capable of different locomotion to perform remote real-time construction progress monitoring in complex construction sites. === Earthmoving === === Concrete works === Obayashi Corporation developed and deployed a robotic system for placing concrete layers in dam construction in Japan. A concrete floor finishing robot was deployed by Kajima and Tokimec in Japan. The MARK series were designed in 1984 to automate the levelling and trowelling of concrete slabs on construction sites, providing consistent finishing accuracy, improved efficiency, and reduced dependence on skilled labour === Masonry === SAM100 (Semi-Automated Mason), developed by Construction Robotics, is one of the first commercially available bricklaying robots for on-site masonry construction. In 2018, it was used in the construction of the University Arts Building at the University of Nevada, Reno — a $35.5 million facility — where it laid over 60,000 of the 100,000 bricks required, reducing the brick veneer installation time by approximately 50%. Hadrian X, developed by the Australian company Fastbrick Robotics, is a fully autonomous mobile bricklaying robot. In November 2022, it completed its first commercial project — five four-bedroom houses in Wellard, Western Australia. In February 2025, PulteGroup, one of the largest homebuilders in the United States, piloted Hadrian X on a site in Florida, constructing an entire house in a single day. === 3D printing === In May 2025, a residential building in Arinaga, Gran Canaria, Spain, was completed using 3D printing construction technology, as part of broader efforts to demonstrate robotic and additive manufacturing methods in the housing sector. In 2026, a three-storey apartment block in France was constructed using concrete 3D printing technology, three months faster than conventional building methods. Finland's Hyperion Robotics has opened a UK factory and used 3D printing with concrete to produce foundations for pipelines and for electricity substation bases, reducing time-consuming and weather-dependent onsite construction processes. == Social impact == The adoption of construction robots varies significantly by region and is shaped by labour market conditions, cultural attitudes, and regulatory frameworks. In Japan, construction robots have been embraced as a response to an ageing workforce and chronic labour shortages, and are generally viewed positively by the industry. In the United States, adoption has historically been slower, partly due to resistance from labour unions concerned about job displacement. Research suggests that the impact of automation on workers is uneven: while robots can create a productivity effect that benefits some workers, displacement effects are most pronounced among younger, less-educated workers in manufacturing-heavy regions. More than 60% of construction firms now report difficulty finding skilled operators, which has increased openness to automation as a practical solution to workforce shortages rather than a replacement for workers. In the UK, during onsite deployment of a humanoid robot for monitoring purposes, there were concerns that staff might think they were being watched ("It's not there to spy on people.... So, we insist that everyone is blurred out. N
Are You Dead?
Are You Dead? (Chinese: 死了么; pinyin: Sǐleme), also known by its English name Demumu, is a Chinese application designed for young people living alone. It requires setting up one emergency contact and sends automatic notifications if the user has not checked in via the app for consecutive days. The app was released on the App Store on 10 June 2025. In early January 2026, the application gained popularity due to its name and the issue of safety for people living alone, and ranked high on the list of paid applications in the Chinese region of the Apple App Store before being removed. The app's rise in popularity sparked discussions about taboos about death in China. == History == Are You Dead? was founded and operated independently by three people born in the 1990s, and developed in a way that involved remote collaboration in their spare time. According to the New Yellow River report, Guo, the product manager, said that the application was designed for young people and that the inspiration came from the discussion of netizens on social platforms about "an app that everyone must have and will definitely download" that he observed two or three years ago. The name was also "not their original creation". After realizing its potential demand and social significance, the team successfully registered the name and completed the product development in about a month. Regarding the development entity, the New Yellow River cited information from the Apple App Store that the application was developed by Yuejing (Zhengzhou) Technology Service Co., Ltd. According to Tianyancha information, the company was established in March 2025 with a registered capital of 100,000 yuan. === Rise in popularity === The app has been generating buzz on social media since 9 January 2026, due to its name and the topic of safety for people living alone. Around 10 January, it topped the Apple paid app chart. As of 10:00 a.m. on January 11, it ranked first in the App Store paid app chart. It also ranked highly in the utility app chart; it ranked first or second in the paid utility app charts in the United States, Singapore and Hong Kong, and first or fourth in Australia and Spain. The app was subsequently removed from the Apple App Store in China. In terms of functionality and usage, First Financial praised the product for its "simple interface and single function," but pointed out that the interface lacks a display of consecutive check-in days, and there is also the possibility that users may forget to check in, leading to the mistaken issuance of reminders. In addition, since the application mainly relies on email reminders and lacks SMS or telephone notifications, it does not conform to Chinese social habits; the untimely notifications also make the application more like a "death notification" tool, losing its early warning significance for emergency rescue. Hu Xijin, former editor-in-chief of the Global Times, commented on the application on Weibo that it is "really good and can help many lonely elderly people." The Beijing News Quick Review pointed out that the role of technical tools is limited and needs to be connected with real support such as community patrols and liaison mechanisms. Due to the price increase, there have also been questions about the motivation for the price increase. The app's rise in popularity sparked discussions about taboos about death in China. Regarding the popularity of the application, both Southern Metropolis Daily and The Beijing News commented that it reflects the public issue of the risks of living alone and reflects the general anxiety of the living alone group about dying alone. Shangguan News further pointed out that although such technology products provide a certain "low-cost sense of security", their "cold notifications" may not only cause false alarms, but also highlight the embarrassing reality that "there is no one to fill in the emergency contact". It also emphasized that algorithms or applications cannot bring true happiness and called on society to reconstruct a support network full of humanistic care while relying on technology. The name of the application has also sparked controversy. Most netizens believe that the name "Are You Dead?" is unlucky and makes it awkward to share the application. They suggest changing it to a milder name such as "Are You Alive?". Hu Xijin also said that the name change could "give the elderly who use it more psychological comfort" and "believe that the application will become more popular after the name change". Some people also believe that this straightforward name just points out the real dilemma faced by people living alone and has a special meaning. BBC News commented that the name "Are You Dead" is playing a word game with Ele.me (Chinese: 饿了么; pinyin: Èleme) and the pronunciation is also similar. Legal professionals believe that its name is highly similar to Ele.me and may cause confusion. They also raised the possibility of trademark infringement and unfair competition. However, the developers said that the application is developed for young people and death is not a sensitive topic. They will "consider launching a new application that is more suitable for middle-aged and elderly people". They have not yet received any name change requests from relevant departments. On the evening of 13 January 2026, the Are You Dead? team announced that it would change its name to the English brand name Demumu in the upcoming new version. On 11 January, the development team also issued a statement through its official Weibo account, stating that it would study the renaming suggestion and plan to enrich the SMS reminder function, consider adding the message function and explore the direction of age-friendly products; it also stated that it would launch an 8 yuan paid plan to cover the costs of SMS, servers, etc., and welcomed investors to discuss cooperation. In terms of financing and valuation, it plans to sell 10% of the company's shares for 1 million yuan and proposed a valuation of 10 million yuan. On the evening of January 15, the application was removed from the app store in mainland China. == Functions == The application does not require users to enter phone numbers or other information to register. After filling in their name and setting an emergency contact, users can click the sign-in button every day. If they fail to sign in for two consecutive days, the system will send an email reminder to the emergency contact the next day. In addition, users can also bind a smart bracelet to monitor physiological signs, pre-designate a hearse driver and funeral music, and trigger the "one-click body collection" function when no pulse is detected. The application was initially available for free download, but a one yuan paid download option was introduced at the end of 2025. In January 2026, the application team issued a statement saying that an 8 yuan paid option would be launched based on the costs of SMS, servers, etc.
Spectral shape analysis
Spectral shape analysis relies on the spectrum (eigenvalues and/or eigenfunctions) of the Laplace–Beltrami operator to compare and analyze geometric shapes. Since the spectrum of the Laplace–Beltrami operator is invariant under isometries, it is well suited for the analysis or retrieval of non-rigid shapes, i.e. bendable objects such as humans, animals, plants, etc. == Laplace == The Laplace–Beltrami operator is involved in many important differential equations, such as the heat equation and the wave equation. It can be defined on a Riemannian manifold as the divergence of the gradient of a real-valued function f: Δ f := div grad f . {\displaystyle \Delta f:=\operatorname {div} \operatorname {grad} f.} Its spectral components can be computed by solving the Helmholtz equation (or Laplacian eigenvalue problem): Δ φ i + λ i φ i = 0. {\displaystyle \Delta \varphi _{i}+\lambda _{i}\varphi _{i}=0.} The solutions are the eigenfunctions φ i {\displaystyle \varphi _{i}} (modes) and corresponding eigenvalues λ i {\displaystyle \lambda _{i}} , representing a diverging sequence of positive real numbers. The first eigenvalue is zero for closed domains or when using the Neumann boundary condition. For some shapes, the spectrum can be computed analytically (e.g. rectangle, flat torus, cylinder, disk or sphere). For the sphere, for example, the eigenfunctions are the spherical harmonics. The most important properties of the eigenvalues and eigenfunctions are that they are isometry invariants. In other words, if the shape is not stretched (e.g. a sheet of paper bent into the third dimension), the spectral values will not change. Bendable objects, like animals, plants and humans, can move into different body postures with only minimal stretching at the joints. The resulting shapes are called near-isometric and can be compared using spectral shape analysis. == Discretizations == Geometric shapes are often represented as 2D curved surfaces, 2D surface meshes (usually triangle meshes) or 3D solid objects (e.g. using voxels or tetrahedra meshes). The Helmholtz equation can be solved for all these cases. If a boundary exists, e.g. a square, or the volume of any 3D geometric shape, boundary conditions need to be specified. Several discretizations of the Laplace operator exist (see Discrete Laplace operator) for the different types of geometry representations. Many of these operators do not approximate well the underlying continuous operator. == Spectral shape descriptors == === ShapeDNA and its variants === The ShapeDNA is one of the first spectral shape descriptors. It is the normalized beginning sequence of the eigenvalues of the Laplace–Beltrami operator. Its main advantages are the simple representation (a vector of numbers) and comparison, scale invariance, and in spite of its simplicity a very good performance for shape retrieval of non-rigid shapes. Competitors of shapeDNA include singular values of Geodesic Distance Matrix (SD-GDM) and Reduced BiHarmonic Distance Matrix (R-BiHDM). However, the eigenvalues are global descriptors, therefore the shapeDNA and other global spectral descriptors cannot be used for local or partial shape analysis. === Global point signature (GPS) === The global point signature at a point x {\displaystyle x} is a vector of scaled eigenfunctions of the Laplace–Beltrami operator computed at x {\displaystyle x} (i.e. the spectral embedding of the shape). The GPS is a global feature in the sense that it cannot be used for partial shape matching. === Heat kernel signature (HKS) === The heat kernel signature makes use of the eigen-decomposition of the heat kernel: h t ( x , y ) = ∑ i = 0 ∞ exp ( − λ i t ) φ i ( x ) φ i ( y ) . {\displaystyle h_{t}(x,y)=\sum _{i=0}^{\infty }\exp(-\lambda _{i}t)\varphi _{i}(x)\varphi _{i}(y).} For each point on the surface the diagonal of the heat kernel h t ( x , x ) {\displaystyle h_{t}(x,x)} is sampled at specific time values t j {\displaystyle t_{j}} and yields a local signature that can also be used for partial matching or symmetry detection. === Wave kernel signature (WKS) === The WKS follows a similar idea to the HKS, replacing the heat equation with the Schrödinger wave equation. === Improved wave kernel signature (IWKS) === The IWKS improves the WKS for non-rigid shape retrieval by introducing a new scaling function to the eigenvalues and aggregating a new curvature term. === Spectral graph wavelet signature (SGWS) === SGWS is a local descriptor that is not only isometric invariant, but also compact, easy to compute and combines the advantages of both band-pass and low-pass filters. An important facet of SGWS is the ability to combine the advantages of WKS and HKS into a single signature, while allowing a multiresolution representation of shapes. == Spectral Matching == The spectral decomposition of the graph Laplacian associated with complex shapes (see Discrete Laplace operator) provides eigenfunctions (modes) which are invariant to isometries. Each vertex on the shape could be uniquely represented with a combinations of the eigenmodal values at each point, sometimes called spectral coordinates: s ( x ) = ( φ 1 ( x ) , φ 2 ( x ) , … , φ N ( x ) ) for vertex x . {\displaystyle s(x)=(\varphi _{1}(x),\varphi _{2}(x),\ldots ,\varphi _{N}(x)){\text{ for vertex }}x.} Spectral matching consists of establishing the point correspondences by pairing vertices on different shapes that have the most similar spectral coordinates. Early work focused on sparse correspondences for stereoscopy. Computational efficiency now enables dense correspondences on full meshes, for instance between cortical surfaces. Spectral matching could also be used for complex non-rigid image registration, which is notably difficult when images have very large deformations. Such image registration methods based on spectral eigenmodal values indeed capture global shape characteristics, and contrast with conventional non-rigid image registration methods which are often based on local shape characteristics (e.g., image gradients).
Dropbox Carousel
Dropbox Carousel was a photo and video management app offered by Dropbox. The third-party native app, available on Android and iOS, allowed users to store, manage, and organize photos. Photos were organized by date, time and event and backed up on Dropbox. It competed in this space against other online photo storage services such as Google's Google Photos, Apple's iCloud, and Yahoo's Flickr. Chris Lee, Dropbox's head of product development for Carousel described the app as an add-on to Dropbox, a “dedicated experience for photos and videos” and a space for “reliving personal memories”. == History == Mailbox founder, Gentry Underwood unveiled Carousel at a gathering in San Francisco on April 9, 2014. Much of the features in Carousel come from Snapjoy, a photo start-up, that Dropbox acquired on December 19, 2012. When Carousel was launched, it marked amongst many others, a series of acquisitions made by Dropbox to prep up before opening its stock for public offering. The acquisitions would help demonstrate its expansive product offerings pitching potential profitability to investors. In December 2015, Dropbox announced that Carousel would be shut down and some Carousel features would be integrated into the primary Dropbox application. On March 31, 2016, Carousel was deactivated. == Features == Carousel prompted users to free local storage once it had synced and backed-up local photos to the cloud. Flashback was a feature (enabled by default) that showed past photos or videos taken the same day, a year, or some years back. Flashback used an algorithm designed to identify human faces - resulting in greater likelihood of the user's picture or people in the user's close circle appearing. A scrollable timeline, which was earlier a scroll wheel, at the bottom let the user scroll to photo(s) at a specific date with a finger swipe.
List of video editing software
The following is a list of video editing software. The criterion for inclusion in this list is the ability to perform non-linear video editing. Most modern transcoding software supports transcoding a portion of a video clip, which would count as cropping and trimming. However, items in this article have one of the following conditions: Can perform other non-linear video editing function such as montage or compositing Can do the trimming or cropping without transcoding == Free (libre) or open-source == The software listed in this section is either free software or open source, and may or may not be commercial. === Active and stable === === Inactive === == Proprietary (non-commercial) == The software listed in this section is proprietary, and freeware or freemium. === Active === === Discontinued === == Proprietary (commercial) == The software listed in this section is proprietary and commercial. === Active === === Discontinued ===