Spectral shape analysis relies on the spectrum (eigenvalues and/or eigenfunctions) of the Laplace–Beltrami operator to compare and analyze geometric shapes. Since the spectrum of the Laplace–Beltrami operator is invariant under isometries, it is well suited for the analysis or retrieval of non-rigid shapes, i.e. bendable objects such as humans, animals, plants, etc. == Laplace == The Laplace–Beltrami operator is involved in many important differential equations, such as the heat equation and the wave equation. It can be defined on a Riemannian manifold as the divergence of the gradient of a real-valued function f: Δ f := div grad f . {\displaystyle \Delta f:=\operatorname {div} \operatorname {grad} f.} Its spectral components can be computed by solving the Helmholtz equation (or Laplacian eigenvalue problem): Δ φ i + λ i φ i = 0. {\displaystyle \Delta \varphi _{i}+\lambda _{i}\varphi _{i}=0.} The solutions are the eigenfunctions φ i {\displaystyle \varphi _{i}} (modes) and corresponding eigenvalues λ i {\displaystyle \lambda _{i}} , representing a diverging sequence of positive real numbers. The first eigenvalue is zero for closed domains or when using the Neumann boundary condition. For some shapes, the spectrum can be computed analytically (e.g. rectangle, flat torus, cylinder, disk or sphere). For the sphere, for example, the eigenfunctions are the spherical harmonics. The most important properties of the eigenvalues and eigenfunctions are that they are isometry invariants. In other words, if the shape is not stretched (e.g. a sheet of paper bent into the third dimension), the spectral values will not change. Bendable objects, like animals, plants and humans, can move into different body postures with only minimal stretching at the joints. The resulting shapes are called near-isometric and can be compared using spectral shape analysis. == Discretizations == Geometric shapes are often represented as 2D curved surfaces, 2D surface meshes (usually triangle meshes) or 3D solid objects (e.g. using voxels or tetrahedra meshes). The Helmholtz equation can be solved for all these cases. If a boundary exists, e.g. a square, or the volume of any 3D geometric shape, boundary conditions need to be specified. Several discretizations of the Laplace operator exist (see Discrete Laplace operator) for the different types of geometry representations. Many of these operators do not approximate well the underlying continuous operator. == Spectral shape descriptors == === ShapeDNA and its variants === The ShapeDNA is one of the first spectral shape descriptors. It is the normalized beginning sequence of the eigenvalues of the Laplace–Beltrami operator. Its main advantages are the simple representation (a vector of numbers) and comparison, scale invariance, and in spite of its simplicity a very good performance for shape retrieval of non-rigid shapes. Competitors of shapeDNA include singular values of Geodesic Distance Matrix (SD-GDM) and Reduced BiHarmonic Distance Matrix (R-BiHDM). However, the eigenvalues are global descriptors, therefore the shapeDNA and other global spectral descriptors cannot be used for local or partial shape analysis. === Global point signature (GPS) === The global point signature at a point x {\displaystyle x} is a vector of scaled eigenfunctions of the Laplace–Beltrami operator computed at x {\displaystyle x} (i.e. the spectral embedding of the shape). The GPS is a global feature in the sense that it cannot be used for partial shape matching. === Heat kernel signature (HKS) === The heat kernel signature makes use of the eigen-decomposition of the heat kernel: h t ( x , y ) = ∑ i = 0 ∞ exp ( − λ i t ) φ i ( x ) φ i ( y ) . {\displaystyle h_{t}(x,y)=\sum _{i=0}^{\infty }\exp(-\lambda _{i}t)\varphi _{i}(x)\varphi _{i}(y).} For each point on the surface the diagonal of the heat kernel h t ( x , x ) {\displaystyle h_{t}(x,x)} is sampled at specific time values t j {\displaystyle t_{j}} and yields a local signature that can also be used for partial matching or symmetry detection. === Wave kernel signature (WKS) === The WKS follows a similar idea to the HKS, replacing the heat equation with the Schrödinger wave equation. === Improved wave kernel signature (IWKS) === The IWKS improves the WKS for non-rigid shape retrieval by introducing a new scaling function to the eigenvalues and aggregating a new curvature term. === Spectral graph wavelet signature (SGWS) === SGWS is a local descriptor that is not only isometric invariant, but also compact, easy to compute and combines the advantages of both band-pass and low-pass filters. An important facet of SGWS is the ability to combine the advantages of WKS and HKS into a single signature, while allowing a multiresolution representation of shapes. == Spectral Matching == The spectral decomposition of the graph Laplacian associated with complex shapes (see Discrete Laplace operator) provides eigenfunctions (modes) which are invariant to isometries. Each vertex on the shape could be uniquely represented with a combinations of the eigenmodal values at each point, sometimes called spectral coordinates: s ( x ) = ( φ 1 ( x ) , φ 2 ( x ) , … , φ N ( x ) ) for vertex x . {\displaystyle s(x)=(\varphi _{1}(x),\varphi _{2}(x),\ldots ,\varphi _{N}(x)){\text{ for vertex }}x.} Spectral matching consists of establishing the point correspondences by pairing vertices on different shapes that have the most similar spectral coordinates. Early work focused on sparse correspondences for stereoscopy. Computational efficiency now enables dense correspondences on full meshes, for instance between cortical surfaces. Spectral matching could also be used for complex non-rigid image registration, which is notably difficult when images have very large deformations. Such image registration methods based on spectral eigenmodal values indeed capture global shape characteristics, and contrast with conventional non-rigid image registration methods which are often based on local shape characteristics (e.g., image gradients).
Workplace robotics safety
Workplace robotics safety is an aspect of occupational safety and health when robots are used in the workplace. This includes traditional industrial robots as well as emerging technologies such as drone aircraft and wearable robotic exoskeletons. Types of accidents include collisions, crushing, and injuries from mechanical parts. Hazard controls include physical barriers, good work practices, and proper maintenance. == Background == Many workplace robots are industrial robots used in manufacturing. According to the International Federation of Robotics, 1.7 million new robots are expected to be used in factories between 2017 and 2020. Emerging robot technologies include collaborative robots, personal care robots, construction robots, exoskeletons, autonomous vehicles, and drone aircraft (also known as unmanned aerial vehicles or UAVs). Advances in automation technologies (e.g. fixed robots, collaborative and mobile robots, and exoskeletons) have the potential to improve work conditions but also to introduce workplace hazards in manufacturing workplaces. Fifty-six percent of robot injuries are classified as pinch injuries and 44% of injuries are classified as impact injuries. A 1987 study found that line workers are at the greatest risk, followed by maintenance workers, and programmers. Poor workplace design and human error caused most injuries. Despite the lack of occupational surveillance data on injuries associated specifically with robots, researchers from the US National Institute for Occupational Safety and Health (NIOSH) identified 61 robot-related deaths between 1992 and 2015 using keyword searches of the Bureau of Labor Statistics (BLS) Census of Fatal Occupational Injuries research database (see info from Center for Occupational Robotics Research). Using data from the Bureau of Labor Statistics, NIOSH and its state partners have investigated 4 robot-related fatalities under the Fatality Assessment and Control Evaluation Program. In addition the Occupational Safety and Health Administration (OSHA) has investigated robot-related deaths and injuries, which can be reviewed at OSHA Accident Search page. Injuries and fatalities could increase over time because of the increasing number of collaborative and co-existing robots, powered exoskeletons, and autonomous vehicles into the work environment. Safety standards are being developed by the Robotic Industries Association (RIA) in conjunction with the American National Standards Institute (ANSI). On October 5, 2017, OSHA, NIOSH and RIA signed an alliance to work together to enhance technical expertise, identify and help address potential workplace hazards associated with traditional industrial robots and the emerging technology of human-robot collaboration installations and systems, and help identify needed research to reduce workplace hazards. On October 16 NIOSH launched the Center for Occupational Robotics Research to "provide scientific leadership to guide the development and use of occupational robots that enhance worker safety, health, and well being". So far, the research needs identified by NIOSH and its partners include: tracking and preventing injuries and fatalities, intervention and dissemination strategies to promote safe machine control and maintenance procedures, and on translating effective evidence-based interventions into workplace practice. == Hazards == Many hazards and injuries can result from the use of robots in the workplace. Some robots, notably those in a traditional industrial environment, are fast and powerful. This increases the potential for injury as one swing from a robotic arm, for example, could cause serious bodily harm. There are additional risks when a robot malfunctions or is in need of maintenance. A worker who is working on the robot may be injured because a malfunctioning robot is typically unpredictable. For example, a robotic arm that is part of a car assembly line may experience a jammed motor. A worker who is working to fix the jam may suddenly get hit by the arm the moment it becomes unjammed. Additionally, if a worker is standing in a zone that is overlapping with nearby robotic arms, he or she may get injured by other moving equipment. There are four types of accidents that can occur with robots: impact or collision accidents, crushing and trapping accidents, mechanical part accidents, and other accidents. Impact or collision accidents occur generally from malfunctions and unpredicted changes. Crushing and trapping accidents occur when a part of a worker's body becomes trapped or caught on robotic equipment. Mechanical part accidents can occur when a robot malfunctions and starts to "break down", where the ejection of parts or exposed wire can cause serious injury. Other accidents at just general accidents that occur from working with robots. There are seven sources of hazards that are associated with human interaction with robots and machines: human errors, control errors, unauthorized access, mechanical failures, environmental sources, power systems, and improper installation. Human errors could be anything from one line of incorrect code to a loose bolt on a robotic arm. Many hazards can stem from human-based error. Control errors are intrinsic and are usually not controllable nor predictable. Unauthorized access hazards occur when a person who is not familiar with the area enters the domain of a robot. Mechanical failures can happen at any time, and a faulty unit is usually unpredictable. Environmental sources are things such as electromagnetic or radio interference in the environment that can cause a robot to malfunction. Power systems are pneumatic, hydraulic, or electrical power sources; these power sources can malfunction and cause fires, leaks, or electrical shocks. Improper installation is fairly self-explanatory; a loose bolt or an exposed wire can lead to inherent hazards. === Emerging technologies === Emerging robotic technologies can reduce hazards to workers, but can also introduce new hazards. For example, robotic exoskeletons can be used in construction to reduce load to the spine, improve posture, and reduce fatigue; however, they can also increase chest pressure, limit mobility when moving out of the way of a falling object, and cause balance problems. Unmanned aerial vehicles are being used in the construction industry to do monitoring and inspections of buildings under construction. This reduces the need for humans to be in hazardous locations, but the risk of a UAV collision presents a hazard to workers. For collaborative robots, isolation is not possible. Possible hazard controls include collision avoidance systems, and making the robot less stiff to lessen the impact force. Robotic tech vest is a wearable device for humans, worn in Amazon warehouses. == Hazard controls == There are a few ways to prevent injuries by implementing hazard controls. There can be risk assessments at each of the various stages of a robot's development. Risk assessments can help gather information about a robot's status, how well it is being maintained, and if repairs are needed soon. By being aware of the status of a robot, injuries can be prevented and hazards reduced. Safeguarding devices can be implemented to reduce the risk of injuries. These can include engineering controls such as physical barriers, guard rails, presence-sensing safeguarding devices, etc. Awareness devices are usually used in conjunction with safeguarding devices. They are usually a system of rope or chain barriers with lights, signs, whistles, and horns. Their purpose it to be able to alert workers or personnel of certain dangers. Operator safeguards can also be in place. These usually utilize safeguarding devices to protect the operator and reduce risk of injury. Additionally, when an operator is within close proximity of a robot, the working speed of the robot can be reduced to ensure that the operator is in full control. This can be done by placing the robot in the manual or teach mode. It is also crucial to inform the programmer of the robot of what type of work the robot will be doing, how it will interact with other robots, and how it will work in relation to an operator. Proper maintenance of robotic equipment is also critical in order to reduce hazards. Maintaining a robot insures that it continues to function properly, thereby reducing the risks associated with a malfunction. One common safeguard used in industrial settings is the installation of robot safety fencing. These barriers, often made from durable materials such as mesh or polycarbonate, prevent accidental interactions between workers and robotic systems, reducing the risk of injury. Robot safety fencing is particularly important in environments where high-speed or powerful robots are used. == Regulations == Some existing regulations regarding robots and robotic systems include: ANSI/RIA R15.06 OSHA 29 CFR 1910.333 OSHA 29 CFR 1910.147 ISO 10218 ISO/TS 15066 ISO/DIS 13482
IBM ALP
IBM Assembly Language Processor (ALP) is an assembler written by IBM for 32-bit OS/2 Warp (OS/2 3.0), which was released in 1994. ALP accepts source programs compatible with Microsoft Macro Assembler (MASM) version 5.1, which was originally used to build many of the device drivers included with OS/2. For OS/2 versions 3 and 4, ALP was distributed, along with other tools and documentation, as part of the Device Driver Kit (DDK). The DDK was withdrawn in 2004 as part of IBM's discontinuance of OS/2.
Test data management
Test data management (TDM) is a process in software testing concerned with the creation, preparation, and control of data used for testing software systems. It involves supplying datasets required to execute test cases and verifying system behaviour under defined conditions. Test data management is an integral part of the software development lifecycle (SDLC) and is utilized in both manual and automated testing processes. It is applied in environments that use continuous integration and DevOps practices, where test execution requires consistent and repeatable data conditions. == Overview == Test data management includes the generation, selection, and preparation of data for testing purposes, as well as its distribution across test environments. It also involves controlling data versions and ensuring that datasets correspond to specific test scenarios. In many cases, production data is adapted for testing through techniques such as masking or subsetting to reduce size and remove sensitive content. Test data management ensures that test cases are executed with relevant, consistent, and readily available data. This reduces variability in test results and supports reproducibility across test cycles. == Importance == The role of test data management has expanded with the growth of complex, data-driven systems and regulatory requirements governing data usage. Testing often depends on data that reflects real-world conditions, but direct use of production data may introduce security and privacy risks. As a result, organizations apply methods such as data masking and anonymization to meet compliance requirements, including those set by the California Privacy Rights Act (CPRA) and Europe’s General Data Protection Regulation (GDPR). Inadequate control of test data can lead to incomplete test coverage, unreliable test results, or delays in testing processes due to unavailable or inconsistent datasets. == Techniques and tools == Test data management leverages various techniques for preparing and controlling data used in testing. These include the generation of synthetic data, the extraction of subsets from production datasets, and the modification of data to remove or obscure sensitive information. A key technical requirement in these processes is maintaining referential integrity, or ensuring that relationships between data entities remain consistent across different tables and systems after masking or subsetting. Data virtualization is also used to provide access to datasets without full replication. These methods may be implemented using software tools that automate data preparation, masking, and distribution.
Kounta (software company)
Kounta is an Australian software company founded in 2012. The company's flagship product, Kounta, comprises a cloud based point of sale mobile app. == History == Kounta was founded in 2012 by entrepreneur Nick Cloete. The company is headquartered in Sydney, Australia. In 2012, the company launched its flagship product, Kounta, a hospitality-focused point of sale (POS) mobile app for iPad, Android, Mac, and Windows. The app was initially a web-based application, and later developed into an online cash register and inventory management system that allows businesses to take payments from customers via mobile devices. The app has been made available for iPad, iPhone, and Android devices; as well as iOS, Windows, and other peripherals. In 2012, Kounta partnered with Epson, providing a cloud-based POS platform for Epson printers. In 2013, the company formed a partnership with PayPal, integrating cashless and cardless transaction options via PayPal's mobile app. In 2014, MYOB (company) made an undisclosed investment towards Kounta. This partnership led to the development of MYOB Kounta, a co-branded application merging Kounta's POS with MYOB's application software. MYOB Kounta launched in October of the same year. In 2016, Kounta announced a partnership with the Commonwealth Bank of Australia to include the Kounta app onto "Albert", the bank's EFTPOS tablet, which allowed the Commonwealth Bank of Australia to become the first bank to manage all customers operations from a single device and mobile application. == Technology == The Kounta POS is a software-as-a-service (SaaS) that runs as an application in web browsers as well as natively on iOS and Android operating systems. Kounta also incorporates an Open API, making it possible for other software providers to integrate complementary apps, further extending the software's use. Traditional IT tasks, such as data backup and encryption, hardware maintenance, and server upgrades are handled by Kounta's data center. Kounta is made accessible via paid monthly subscription licenses. == Acquisition by Lightspeed == In October 2019, Kounta was acquired by Lightspeed, an advanced commerce platform for retail, hospitality, and golf businesses based in Montreal, Canada. Lightspeed acquired Kounta for $35.3 million USD.
AI warfare
AI warfare refers to the use of artificial intelligence technologies to automate military operation and enhance or bypass human decision-making in armed conflicts. AI is used to rapidly analyze large volumes of military intelligence data, including making recommendations or decisions on who and what to target. Abdul-Rahman al-Rawi, a 20-year-old student, was the first acknowledged civilian killed by AI-assisted airstrike in a U.S. strike in Iraq in 2024. In 2026, the U.S. declared it would become an 'AI-first' warfighting force. Husain et al (2018) coined the term hyperwar to refer to warfare which is algorithmic or controlled by artificial intelligence, with little to no human decision-making. == 2026 Iran war == The 2026 Iran war has been described as the "first AI war", although the Untied States and Israel have previously used AI to identify targets during the Gaza war. The U.S. has used AI tools to attack Iran. These tools have been used for military intelligence, targeting, and damage assessment in the war in Iran. Using the Maven smart system, the U.S. attacked 1,000 targets in the first 24 hours of the war and 5,000 targets over the course of 10 days. While the U.S. had used Maven in 2022 to share targeting information with Ukraine and strike against Iraq, Syria, and against the Houthis in 2024, Iran's attacks are its biggest. Authorities are looking into whether artificial intelligence was involved in the airstrike on an Iranian girls' school that killed 170 civilians, the majority of whom were female students. The United States Central Command emphasized that humans were making final targeting decisions. Per a White House tally released on April 8, the U.S. military hit over 13,000 targets in Iran during the war's first 38 days, including more than 2,000 command-and-control sites, 1,500 air defense targets, and 1,450 industrial infrastructure targets. == Gaza war == As part of the Gaza war, the Israel Defense Forces (IDF) have used artificial intelligence to rapidly and automatically perform much of the process of determining what to bomb. IDF's Unit 8200 developed AI systems, dubbed the Gospel and Lavender, to find targets for the Israeli Air Force to bomb. The Gospel automatically provides targeting recommendations to human analysts, who decide whether to approve strikes. Lavender identified 37,000 Hamas-linked individuals early in the war, and was used alongside the Gospel, which chooses buildings or structures as targets. According to a report by +972 Magazine and Local Call, strikes assisted by Lavender were routinely permitted to kill 5–20 civilians for each suspected Hamas militant, who were often bombed at home with their families. The IDF denies these claims, maintaining that every strike is assessed to minimize collateral damage, and that there is no policy "to kill tens of thousands of people in their homes." Israel deployed AI technologies during the Gaza war for audio analysis, facial recognition, and airstrike targeting. One such system was used to help identify the location of Hamas commander Ibrahim Biari through phone call analysis, leading to strikes that killed him as well as more than 125 civilians. == 2022 Russian Ukraine war == Kyiv launched a project with Palantir called Brave1 Dataroom to build AI systems using the extensive combat data Ukraine has gathered since Russia’s full-scale invasion in 2022. The country has also created tools for in-depth airstrike analysis, introduced AI to process large volumes of intelligence, and incorporated these technologies into the planning of long-range strike operations. == Involved companies == Maven Smart System is developed by Palantir. It integrates Anthropic's Claude as its large language model, and uses Amazon's AWS servers as its cloud infrastructure. Since Anthropic's refusal to support autonomous weapons development and domestic surveillance efforts. In its place, other AI firms, including OpenAI, have been brought in to take over that role. == Involved state actors == In 2024, the United States Department of Defense had 800-plus active AI-related projects and requested $1.8 billion in AI funding, with Project Maven and Project Artemis (AI-resistant drones developed together with Ukraine) being the main ones. The technology has been used in Iran, Iraq, Syria and Yemen to identify targets. China is pursuing intelligentized warfare, integrating AI across all combat domains—land, sea, air, space, and cyber—with military AI spending exceeding $1.6 billion annually. == International regulation == Since 2014, states meeting within the framework of the Convention on Certain Conventional Weapons have discussed lethal autonomous weapon systems. In 2016, the treaty's states parties established an open-ended Group of Governmental Experts on Lethal Autonomous Weapons Systems to continue those discussions. The discussions have addressed international humanitarian law, accountability, possible prohibitions and regulations, and the extent of human control required over AI-enabled weapons.
IQTELL
IQTELL was a productivity app that allowed users to manage email, tasks, projects, calendars, contacts, Evernotes and more in a single app. IQTELL was available as a web app, as well as an iOS and Android app. All user information was automatically synced between all devices. iOS and Android apps supported offline access. The app could be used to implement concepts and techniques described in the book Getting Things Done by David Allen. == History == IQTELL was created by Ran Flam and released in 2013. In 2014, mobile apps for iOS and Android were released. In 2015, Premium and Platinum subscription plans were introduced (while maintaining the free user version). In April 2017, a new web app was launched. On July 31, 2017, all IQTell services have been closed. == Productivity methods == IQTell was designed to fit in with the Getting Things Done (GTD) productivity methods. Users may have had utilized GTD lists, such as Inbox, Actions, Projects, Someday, Ticklers, and Reference information to process their Inbox items into relevant GTD lists. Using the web app, iOS and/or Android apps, users could deploy macros/shortcuts to quickly process their email. Email was turned into tasks (actions), projects, etc. The original email was removed from the email inbox. The email became a part of the items created (e.g. actions, project, etc.) and could also be viewed in the All Mail folder (if Gmail), or the Archive folder (if non-Gmail). Users had flexibility to use the out-of-the-box macros/shortcuts as well as edit/create additional macros. IQTELL features included email, calendars, contacts, list management, sharing and collaboration with team members. All of the features were compatible with commonly used organization software such as Evernote and iCloud.