The swish function is a family of mathematical function defined as follows: swish β ( x ) = x sigmoid ( β x ) = x 1 + e − β x . {\displaystyle \operatorname {swish} _{\beta }(x)=x\operatorname {sigmoid} (\beta x)={\frac {x}{1+e^{-\beta x}}}.} where β {\displaystyle \beta } can be constant (usually set to 1) or trainable and "sigmoid" refers to the logistic function. The swish family was designed to smoothly interpolate between a linear function and the Rectified linear unit (ReLU) function. When considering positive values, Swish is a particular case of doubly parameterized sigmoid shrinkage function defined in . Variants of the swish function include Mish. == Special values == For β = 0, the function is linear: f(x) = x/2. For β = 1, the function is the Sigmoid Linear Unit (SiLU). For β = 1.702, the function approximates GeLU. With β → ∞, the function converges to ReLU. Thus, the swish family smoothly interpolates between a linear function and the ReLU function. Since swish β ( x ) = swish 1 ( β x ) / β {\displaystyle \operatorname {swish} _{\beta }(x)=\operatorname {swish} _{1}(\beta x)/\beta } , all instances of swish have the same shape as the default swish 1 {\displaystyle \operatorname {swish} _{1}} , zoomed by β {\displaystyle \beta } . One usually sets β > 0 {\displaystyle \beta >0} . When β {\displaystyle \beta } is trainable, this constraint can be enforced by β = e b {\displaystyle \beta =e^{b}} , where b {\displaystyle b} is trainable. swish 1 ( x ) = x 2 + x 2 4 − x 4 48 + x 6 480 + O ( x 8 ) {\displaystyle \operatorname {swish} _{1}(x)={\frac {x}{2}}+{\frac {x^{2}}{4}}-{\frac {x^{4}}{48}}+{\frac {x^{6}}{480}}+O\left(x^{8}\right)} swish 1 ( x ) = x 2 tanh ( x 2 ) + x 2 swish 1 ( x ) + swish − 1 ( x ) = x tanh ( x 2 ) swish 1 ( x ) − swish − 1 ( x ) = x {\displaystyle {\begin{aligned}\operatorname {swish} _{1}(x)&={\frac {x}{2}}\tanh \left({\frac {x}{2}}\right)+{\frac {x}{2}}\\\operatorname {swish} _{1}(x)+\operatorname {swish} _{-1}(x)&=x\tanh \left({\frac {x}{2}}\right)\\\operatorname {swish} _{1}(x)-\operatorname {swish} _{-1}(x)&=x\end{aligned}}} == Derivatives == Because swish β ( x ) = swish 1 ( β x ) / β {\displaystyle \operatorname {swish} _{\beta }(x)=\operatorname {swish} _{1}(\beta x)/\beta } , it suffices to calculate its derivatives for the default case. swish 1 ′ ( x ) = x + sinh ( x ) 4 cosh 2 ( x 2 ) + 1 2 {\displaystyle \operatorname {swish} _{1}'(x)={\frac {x+\sinh(x)}{4\cosh ^{2}\left({\frac {x}{2}}\right)}}+{\frac {1}{2}}} so swish 1 ′ ( x ) − 1 2 {\displaystyle \operatorname {swish} _{1}'(x)-{\frac {1}{2}}} is odd. swish 1 ″ ( x ) = 1 − x 2 tanh ( x 2 ) 2 cosh 2 ( x 2 ) {\displaystyle \operatorname {swish} _{1}''(x)={\frac {1-{\frac {x}{2}}\tanh \left({\frac {x}{2}}\right)}{2\cosh ^{2}\left({\frac {x}{2}}\right)}}} so swish 1 ″ ( x ) {\displaystyle \operatorname {swish} _{1}''(x)} is even. == History == SiLU was first proposed alongside the GELU in 2016, then again proposed in 2017 as the Sigmoid-weighted Linear Unit (SiL) in reinforcement learning. The SiLU/SiL was then again proposed as the SWISH over a year after its initial discovery, originally proposed without the learnable parameter β, so that β implicitly equaled 1. The swish paper was then updated to propose the activation with the learnable parameter β. In 2017, after performing analysis on ImageNet data, researchers from Google indicated that using this function as an activation function in artificial neural networks improves the performance, compared to ReLU and sigmoid functions. It is believed that one reason for the improvement is that the swish function helps alleviate the vanishing gradient problem during backpropagation.
C3D Toolkit
C3D Toolkit is a proprietary cross-platform geometric modeling kit software developed by Russian C3D Labs (previously part of ASCON Group). It's written in C++ . It can be licensed by other companies for use in their 3D computer graphics software products. The most widely known software in which C3D Toolkit is typically used are computer aided design (CAD), computer-aided manufacturing (CAM), and computer-aided engineering (CAE) systems. C3D Toolkit provides routines for 3D modeling, 3D constraint solving, polygonal mesh-to-B-rep conversion, 3D visualization, and 3D file conversions etc. == History == Nikolai Golovanov is a graduate of the Mechanical Engineering department of Bauman Moscow State Technical University as a designer of space launch vehicles. Upon his graduation, he began with the Kolomna Engineering Design bureau, which at the time employed the future founders of ASCON, Alexander Golikov and Tatiana Yankina. While at the bureau, Dr Golovanov developed software for analyzing the strength and stability of shell structures. In 1989, Alexander Golikov and Tatiana Yankina left Kolomna to start up ASCON as a private company. Although they began with just an electronic drawing board, even then they were already conceiving the idea of three-dimensional parametric modeling. This radical concept eventually changed flat drawings into three-dimensional models. The ASCON founders shared their ideas with Nikolai Golovanov, and in 1996 he moved to take up his current position with ASCON. As of 2012 he was involved in developing algorithms for C3D Toolkit. In 2012 the earliest version of the C3D Modeller kernel was extracted from KOMPAS-3D CAD. It was later adopted to a range of different platforms and advertised as a separate product. == Overview == It incorporates five modules: C3D Modeler constructs geometric models, generates flat projections of models, performs triangulations, calculates the inertial characteristics of models, and determines whether collisions occur between the elements of models; C3D Modeler for ODA enables advanced 3D modeling operations through the ODA's standard "OdDb3DSolid" API from the Open Design Alliance; C3D Solver makes connections between the elements of geometric models, and considers the geometric constraints of models being edited; C3D B-Shaper converts polygonal models to boundary representation (B-rep) bodies; C3D Vision controls the quality of rendering for 3D models using mathematical apparatus and software, and the workstation hardware; C3D Converter reads and writes geometric models in a variety of standard exchange formats. == Features == == Development == == Applications == Since 2013 - the date the company started issuing a license for the toolkit -, several companies have adopted C3D software components for their products, users include: Recently, C3D Modeler has been adapted to ODA Platform. In April 2017, C3D Viewer was launched for end users. The application allows to read 3D models in common formats and write it to the C3D file format. Free version is available.
The Life and Times of Multivac
"The Life and Times of Multivac" is a science fiction short story by American writer Isaac Asimov. The story first appeared in the 5 January 1975 issue of The New York Times Magazine, and was reprinted in the collections The Bicentennial Man and Other Stories and The Best of Creative Computing in 1976. It is one of a loosely connected series of stories concerning a fictional supercomputer called Multivac. "The Life and Times of Multivac" was the first piece of fiction ever commissioned and published by The New York Times. Asimov's original title for the story was "Mathematical Games", but after the story appeared under the new title he decided he liked it. In his commentary on the story in The Bicentennial Man and Other Stories collection, Asimov stated, "More people came up to me over the next few weeks to tell me they had read that story than had ever been the case for any other story I had ever written." == Plot summary == When humanity begins to chafe under Multivac’s benevolent tyranny, one man takes matters into his own hands to destroy the great computer. By appearing to betray his fellow humans, he places himself in a position to permanently destroy Multivac. It is implied that it is not until completion of the act that he and his peers suddenly realize the enormity of their actions and the consequences it will have on humanity.
Big Mechanism
Big Mechanism is a $45 million DARPA research program, begun in 2014, aimed at developing software that will read cancer research papers, integrate them into a cancer model and frame new hypotheses by the end of 2017 through the automated collection of big data and integrating across various disciplines such as knowledge-based NLP, curation and ontology, systems and mathematical biology by reading research abstracts and papers to extract pieces of causal mechanisms. == Ras gene == The program focuses on mutations in the Ras gene family, which underlie some one-third of human cancers. Currently, a rough road map shows interaction sequences among proteins affecting cell replication and death. However, the causal relations are poorly understood. == Plan == The program is to occur in three stages. The first is to read literature and convert it into formal representations. Second is to integrate the knowledge into computational models. Third is to produce experimentally testable explanations and predictions. Research teams are developing four separate systems targeting all three tasks. In February 2015, an evaluation meeting reviewed progress on the first stage. Multiple tasks were considered. One was extraction of experimental procedure details and evaluating statements such as "we demonstrate" and "we suggest." Another worked to map sentence meaning and relationships. The best machine-reading system extracted 40% of relevant information from a small corpus and correctly determined how each passage related to the model. The second stage is to become active in summer 2015, when members attempt to produce a single reference model. The third stage is the most challenging, because the artificial intelligence community has had limited success at developing hypothesis generators. Molecular biology may be more amenable, because most domain knowledge is technical and available in written form.
TCEC Season 14
The 14th season of the Top Chess Engine Championship took place between 17 November 2018 and 24 February 2019. Stockfish was the defending champion, having defeated Komodo in the previous season's superfinal. The season is notable for two things: the emergence of two strong, new engines, the Komodo variant Komodo Monte Carlo tree search (MCTS) and the neural network engine Leela Chess Zero, and the dramatic superfinal. Komodo MCTS and Leela fought their way from Division 4 and Division 3 respectively to the Premier Division, with Leela further qualifying for the superfinal against Stockfish. The superfinal was a topsy-turvy affair with the lead changing hands several times. It finished as the closest superfinal TCEC has ever seen, with Stockfish winning by a single game, 50.5–49.5 (+10 =81 -9). == Overview == === Structure === The season comprised five divisions: from the lowest Division 4 to the Premier Division. The top two engines of each division promote to the division above, while the bottom two engines relegate. The top two engines of the Premier Division contest a 100-game superfinal. The lengths of the opening books used increases as the divisions progress. The superfinal itself used a custom opening book designed by Jeroen Noomen. === Rules === The TCEC draw and win rules were slightly modified for Season 14. The game is now adjudicated as drawn if, after move 30, both engines have evals ±0.08 for five consecutive moves, and there are neither pawn moves nor a capture. Win adjudication now occurs if both engines have an eval of ±10 for five consecutive moves. Following the controversy over DeusX's participation last season, the uniqueness rule for neural networks was modified such that at least two of the following three hallmarks must be unique: The code for training the neural network The neural network (and weights file) itself The engine that executes this network This change meant DeusX did not meet the uniqueness criteria and therefore did not participate. Aside from this change, the season used the standard rules of the TCEC. == Results == === Division 4 === New entrant Komodo MCTS dominated Division 4, winning by a clear four points, although it did lose a game to second-place finisher rofChade. Fellow new entrant Scorpio NN performed badly and finished last, drawing only one game and losing the rest. === Division 3 === The neural network engine Leela Chess Zero had just missed promotion to Division 2 in the previous season. Since its relatively weak performance last season was partly due to hardware problems, and since it had shown a lot of improvement in strength, it was the hot favourite in this division. Leela lived up to its billing by comprehensively defeating everyone else. In a portent of future divisions however, Leela surprisingly dropped a game to third-place Arasan. Komodo MCTS was also improving quickly, and an updated version finished second behind Leela. The gap between second and third was 6.5 points, illustrating the gulf in class. === Division 2 === Although Division 2 engines are significantly stronger than Division 3, Leela and Komodo MCTS continued to dominate the competition, and again finished first and second. Komodo MCTS only lost one game to Leela, while Leela's tendency to occasionally lose to weaker engines saw her losing a game to 4th-placed Booot. Third place finisher Xiphos gave Leela and Komodo MCTS a run for their money, and was in the running up until the final rounds when it lost a crucial game to Leela. This loss left it one point behind Komodo MCTS in the final standings. === Division 1 === Leela and Komodo MCTS's rampage through the lower divisions continued, and they again finished first and second. In a demonstration of how much it had improved, Leela scored 20/28 in this division, the same score it had achieved in Division 2. This was also a TCEC points record for this division. However, Leela dropped a game against fourth-place finisher Chiron. Komodo MCTS, which had yet to lose a game in the lower divisions except to Leela, also conceded its first loss to third-place Fizbo. At the other end of the table, former champions Jonny and Fritz, which had not been updated, found themselves outclassed and finished second-last and last respectively; however with fellow competitor Ginkgo crashing five times (and therefore being disqualified), Jonny managed to stay in the division. The penultimate game for this division set a new TCEC moves record for a decisive game: 308 moves before Leela defeated Fritz. === Premier division === This was the strongest premier division ever, with multiple-time champions Stockfish, Komodo, and Houdini in the mix. Right from the start it became clear that Stockfish was in a league of its own, and it dominated the division, scoring wins against every other engine without losing a game. Second place however was a hotly-contested affair, with Leela, Komodo and Houdini neck-and-neck for most of the division. Houdini took the early lead, but Komodo gained second after winning two games by forfeit when its sibling Komodo MCTS crashed. This led to murmurs of a "Konspiracy". However, when both Komodo and Houdini failed to score more wins against the lower half of the field, Leela was able to take the lead. Halfway through the division the race was upended again when Leela went through a bad streak, losing three games in a row to Stockfish, Komodo, and Fire. This led to Komodo regaining second place, only for Komodo MCTS to crash yet again. By TCEC rules this meant Komodo MCTS was disqualified and all its scores were zeroed out, which put Leela back in second place. With three games left, Leela missed a win against Andscacs, which would've more or less secured her a place in the superfinal. Meanwhile, Komodo kept the division interesting by winning two of its last three games. Because Komodo had superior tiebreakers to Leela, this meant Komodo would qualify for the superfinal unless Leela managed to hold Stockfish to a draw with Black in the last game of the division. In a tense final game, Stockfish came close to winning, but missed the winning line. Leela managed to draw and qualified for the superfinal. At the other end of the table, it was quickly apparent that Ethereal and Andscacs were the weakest engines and would likely relegate. However, when Komodo MCTS was disqualified (and therefore relegated), it threw both engines a lifeline, since they could now stay in the division by beating the other. Andscacs was able to score a head-to-head win against Ethereal, but was crushed by Stockfish (+0 =2 -4) and Leela (+0 =3 -3). Ethereal didn't manage to score a win in the entire division, but did manage to score more draws than Andscacs, condemning Andscacs to relegation. === Superfinal === Going into the superfinal expectations were high for Leela: she had received a new network and had just won her first major competition when she defeated Houdini in the second TCEC cup. However, she had won the tournament without having played Stockfish (who had been surprisingly eliminated by Houdini in the semifinals). That, plus the fact that Stockfish dominated Premier Division and had never lost a match to Leela, left it unclear which engine was superior, although most spectators favored Stockfish. The superfinal turned out to be a roller-coaster. It began with Stockfish drawing first blood in game 7, and then scoring another win in game 10. Leela hit back with wins in game 11 and 13, but then lost games 20, 21, and 22. This gave Stockfish a 3-point lead. However, in the next 30 games, Leela was the only one to score wins: it first equalized by winning games 25, 27, and 29, and then took the lead by winning games 49 and 53. Stockfish won game 56, but Leela won game 63, maintaining her lead. There followed two dramatic games. In game 65, Leela built up a winning position. Stockfish showed a +153 evaluation, indicating that it had found a forced line leading to an endgame tablebase win; indeed analysis with 7-piece tablebases showed that Leela's position was winning. Under previous seasons' rules, the game would have been adjudicated as a win because Leela's evaluation was above 6.5. However under the new rules, Leela's +8.92 evaluation was not enough to adjudicate. It turned out that Leela could not see the winning line, and shuffled her pieces aimlessly, leading to a 50-move draw. In game 66, Stockfish was given a substantial advantage by the opening, but failed to make the most of it. The evaluations were leveling out to zero when the internet connection to the GPU servers was cut off. By tournament rules, this meant the game was replayed from scratch. After a further internet disconnection and restart, Stockfish handled the opening better and won, leaving Leela with a 1-point lead. In the last third of the superfinal, there followed more drama as Leela often built up strong advantages, but Stockfish showed great resourcefulness in defending inferior positions. Meanwh
Digital transaction management
Digital transaction management (DTM) is a category of cloud services designed to digitally manage document-based transactions. DTM removes the friction inherent in transactions that involve people, documents, and data to create faster, easier, more convenient, and secure processes. DTM goes beyond content and document management to include e-signatures, authentication and non-repudiation; enabling co-browsing between the customer and the business; document transfer and certification; secure archiving that goes beyond records management; and a variety of meta-processes around managing electronic transactions and the documents associated with them. DTM standards are proposed and managed by the xDTM Standard Association Aragon Research has estimated that "by YE 2016, 70% of large enterprises will have a DTM initiative underway or fully implemented."
Google AI Studio
Google AI Studio is a web-based integrated development environment developed by Google for prototyping applications using generative AI models. Released in December 2023 alongside the Gemini API, the platform provides access to Google's Gemini family of models and related tools for image, video, and audio generation. The service targets both developers and non-technical users for testing prompts and generating code for the Gemini API. == History == Google launched AI Studio on December 13, 2023, as the successor to Google MakerSuite. MakerSuite, introduced at Google I/O in May 2023, had provided similar functionality for Google's PaLM language models. The AI Studio was launched alongside the public release of the Gemini API. == Features == AI Studio's interface consists of a central prompt area and a settings panel for model selection and parameter adjustment. The platform supports chat prompts for multi-turn conversations and includes system instructions for defining model behavior, tone, or specific rules. Users can employ zero-shot and few-shot prompting techniques to guide the model's output format. The platform processes various media types including video, audio, and documents, and can generate images through Imagen models, videos through Veo models, and audio through text-to-speech functionality. Additional tools include real-time streaming for screen sharing and live analysis, code execution in a sandboxed Python environment, grounding with Google Search for current information, URL context for analyzing specific web pages, and a thinking mode for complex reasoning tasks. == Available models == The platform provides access to several Google AI models including the Gemini language models, Imagen for image generation, Veo for video generation, LearnLM for educational applications, and Gemma, Google's open-source model family. == Privacy and data usage == Google AI Studio's data handling differs between free and paid users. For free tier users, Google uses submitted prompts, uploaded files, and generated responses to improve its products and services, with human reviewers potentially reading and annotating the data after disconnection from user accounts. Google advises against submitting sensitive information on the free tier. Users who enable Google Cloud Billing are considered paid service users, and their data is not used for product improvement. Data is processed according to Google's Data Processing Addendum and retained temporarily for abuse monitoring. == Availability == The platform is available at no cost, with API usage subject to a free tier with daily and per-minute rate limits. Access is restricted to users aged 18 and older in specific countries and territories. The service was initially unavailable in the United Kingdom and European Economic Area due to regulatory concerns, which drew user complaints. == Reception == Reviews have noted the platform's accessibility and integration with Gemini models, with features such as real-time screen sharing and large context windows cited as notable capabilities. However, reviewers have raised concerns about the privacy implications for free tier users, whose data is used for model training. Some users have reported inconsistent performance with features like screen streaming and issues with folder uploads for large datasets. The initial geographic restrictions were a point of criticism among developers in affected regions.