MLOps

MLOps or ML Ops is a paradigm that aims to deploy and maintain machine learning models in production reliably and efficiently. It bridges the gap between machine learning development and production operations, ensuring that models are robust, scalable, and aligned with business goals. The word is a compound of "machine learning" and the continuous delivery practice (CI/CD) of DevOps in the software field. Machine learning models are tested and developed in isolated experimental systems. When an algorithm is ready to be launched, MLOps is practiced between data scientists, DevOps, and machine learning engineers to transition the algorithm to production systems. Similar to DevOps or DataOps approaches, MLOps seeks to increase automation and improve the quality of production models, while also focusing on business and regulatory requirements. While MLOps started as a set of best practices, it is slowly evolving into an independent approach to ML lifecycle management. MLOps applies to the entire lifecycle - from integrating with model generation (software development lifecycle, continuous integration/continuous delivery), orchestration, and deployment, to health, diagnostics, governance, and business metrics. == Definition == MLOps is a paradigm, including aspects like best practices, sets of concepts, as well as a development culture when it comes to the end-to-end conceptualization, implementation, monitoring, deployment, and scalability of machine learning products. Most of all, it is an engineering practice that leverages three contributing disciplines: machine learning, software engineering (especially DevOps), and data engineering. MLOps is aimed at productionizing machine learning systems by bridging the gap between development (Dev) and operations (Ops). Essentially, MLOps aims to facilitate the creation of machine learning products by leveraging these principles: CI/CD automation, workflow orchestration, reproducibility; versioning of data, model, and code; collaboration; continuous ML training and evaluation; ML metadata tracking and logging; continuous monitoring; and feedback loops. == History == Interest in operationalizing machine learning systems began to grow in the mid-2010s as ML projects started moving from experimentation to production use. The challenges associated with sustaining such systems were highlighted in a 2015 paper. The predicted growth in machine learning included an estimated doubling of ML pilots and implementations from 2017 to 2018, and again from 2018 to 2020. Reports show a majority (up to 88%) of corporate machine learning initiatives are struggling to move beyond test stages. However, those organizations that actually put machine learning into production saw a 3–15% profit margin increases. The MLOps market size was USD 2,191.8 Million in 2024, and is projected to be USD 16,613.4 Million in 2030. == Architecture == Machine Learning systems can be categorized in eight different categories: data collection, data processing, feature engineering, data labeling, model design, model training and optimization, endpoint deployment, and endpoint monitoring. Each step in the machine learning lifecycle is built in its own system, but requires interconnection. These are the minimum systems that enterprises need to scale machine learning within their organization. == Goals == There are a number of goals enterprises want to achieve through MLOps systems successfully implementing ML across the enterprise, including: Deployment and automation Reproducibility of models and predictions Diagnostics Governance and regulatory compliance Scalability Collaboration Business uses Monitoring and management A standard practice, such as MLOps, takes into account each of the aforementioned areas, which can help enterprises optimize workflows and avoid issues during implementation. Vendors such as Adaptive ML deliver commercial reinforcement learning operations (RLOps) and MLOps-infrastructure, targeting organizations deploying large language models in production. A common architecture of an MLOps system would include data science platforms where models are constructed and the analytical engines where computations are performed, with the MLOps tool orchestrating the movement of machine learning models, data and outcomes between the systems.

ViEWER

ViEWER, the Virtual Environment Workbench for Education and Research, is a proprietary, freeware computer program for Microsoft Windows written by researchers at the University of Idaho for the study of visual perception and complex immersive three-dimensional environments. It was created using C++ and OpenGL, and has been used by Dr. Brian Dyre, Dr. Steffen Werner, Dr. Ernesto Bustamante, Dr. Ben Barton, and their undergraduate and graduate researchers in visual perception, signal detection, and child-safety experiments.

World Congress of Universal Documentation

The World Congress of Universal Documentation was held from 16 to 21 August 1937 in Paris, France. Delegates from 45 countries met to discuss means by which all of the world's information, in print, in manuscript, and in other forms, could be efficiently organized and made accessible. == The Congress in the history of information science == The Congress, held at the Trocadéro under "the auspices" of the Institut International de Bibliographie, was "the apotheosis" of a general movement in the 1930s towards the classification of the growing mass of information and the improvement of access to that information. For the first time in the history of information science, technological means were beginning to catch up with theoretical ends, and the discussions at the conference reflected that fact. Its participation in the Congress was one of the first projects of the American Documentation Institute (ADI). Participants in the conference discussed what has been more recently called "a continuously updated hypertext encyclopedia." Joseph Reagle sees many of the ideas considered at the conference as forerunners of some of the key goals and norms of Wikipedia. == Microfilm == The main resolution adopted by the congress proposed that microfilm be used to make information universally available. Watson Davis, chairman of the American delegation and president of the ADI, stated that the volume of information being produced created difficult problems of access and preservation, but that these could be solved by the use of microfilm. In his address to the Congress, Davis said: Most immediate and practical to put into operation is the microfilming of material in libraries upon demand. It will become fashionable and economical to send a potential book borrower a little strip of microfilm for his permanent possession instead of the book and then badgering him to return it before he has had a chance to use it effectively. I believe that reading machines for microfilm will become as common as typewriters in studies and laboratories. If the principal libraries and information centers of the world will cooperate in such "bibliofilm services," as they are called, if they exchange orders and have essentially uniform methods, forms for ordering, standard microfilm format and production methods and comparable if not uniform prices, the resources of any library will be placed at the disposal of any scholar or scientist anywhere in the world. All the libraries cooperating will merge into one world library without loss of identity or individuality. The world's documentation will become available to even the most isolated and individualistic scholar. The Congress included two separate exhibits on microfilm. One was of the equipment used at the Bibliothèque nationale de France and the other, coordinated by Herman H. Fussler of the University of Chicago, consisting of "an entire microfilm laboratory," complete with cameras, a darkroom, and various kinds of reading machines. Emanuel Goldberg presented a paper on an early copying camera he had invented. Other resolutions passed by the Congress concerned uniform standards for the preparation of articles, for classifying books and other documents, for indexing newspapers and periodicals, and for cooperation between libraries. == H. G. Wells == In his address to the Congress, H. G. Wells said that he thought that his idea of the "world brain" was a precursor to the ideas other delegates were proposing, and explicitly linked the projects being discussed to the work of the encyclopédistes: I am speaking of a process of mental organization throughout the world which I believe to be as inevitable as anything can be in human affairs. All the distresses and horrors of the present time are fundamentally intellectual. The world has to pull its mind together, and this [Congress] is the beginning of its efforts. Civilization is a Phoenix. It perishes in flames and even as it dies it is born again. This synthesis of knowledge upon which you are working is the necessary beginning of a new world. It is good to be meeting here in Paris where the first encyclopedia of power was made. It would be impossible to overrate our debt to Diderot and his associates. == Other participants == Participants in the Congress included authors, librarians, scholars, archivists, scientists, and editors. Some of the notable people in attendance not mentioned above were:

Information history

Information history may refer to the history of each of the categories listed below (or to combinations of them). It should be recognized that the understanding of, for example, libraries as information systems only goes back to about 1950. The application of the term information for earlier systems or societies is a retronym. == Academic discipline == Information history is an emerging discipline related to, but broader than, library history. An important introduction and review was made by Alistair Black (2006). A prolific scholar in this field is also Toni Weller, for example, Weller (2007, 2008, 2010a and 2010b). As part of her work Toni Weller has argued that there are important links between the modern information age and its historical precedents. A description from Russia is Volodin (2000). Alistair Black (2006, p. 445) wrote: "This chapter explores issues of discipline definition and legitimacy by segmenting information history into its various components: The history of print and written culture, including relatively long-established areas such as the histories of libraries and librarianship, book history, publishing history, and the history of reading. The history of more recent information disciplines and practice, that is to say, the history of information management, information systems, and information science. The history of contiguous areas, such as the history of the information society and information infrastructure, necessarily enveloping communication history (including telecommunications history) and the history of information policy. The history of information as social history, with emphasis on the importance of informal information networks." "Bodies influential in the field include the American Library Association’s Round Table on Library History, the Library History Section of the International Federation of Library Associations and Institutions (IFLA), and, in the U.K., the Library and Information History Group of the Chartered Institute of Library and Information Professionals (CILIP). Each of these bodies has been busy in recent years, running conferences and seminars, and initiating scholarly projects. Active library history groups function in many other countries, including Germany (The Wolfenbuttel Round Table on Library History, the History of the Book and the History of Media, located at the Herzog August Bibliothek), Denmark (The Danish Society for Library History, located at the Royal School of Library and Information Science), Finland (The Library History Research Group, University of Tamepere), and Norway (The Norwegian Society for Book and Library History). Sweden has no official group dedicated to the subject, but interest is generated by the existence of a museum of librarianship in Bods, established by the Library Museum Society and directed by Magnus Torstensson. Activity in Argentina, where, as in Europe and the U.S., a "new library history" has developed, is described by Parada (2004)." (Black (2006, p. 447). === Journals === Information & Culture (previously Libraries & the Cultural Record, Libraries & Culture) Library & Information History (until 2008: Library History; until 1967: Library Association. Library History Group. Newsletter) == Information technology (IT) == The term IT is ambiguous although mostly synonym with computer technology. Haigh (2011, pp. 432-433) wrote "In fact, the great majority of references to information technology have always been concerned with computers, although the exact meaning has shifted over time (Kline, 2006). The phrase received its first prominent usage in a Harvard Business Review article (Haigh, 2001b; Leavitt & Whisler, 1958) intended to promote a technocratic vision for the future of business management. Its initial definition was at the conjunction of computers, operations research methods, and simulation techniques. Having failed initially to gain much traction (unlike related terms of a similar vintage such as information systems, information processing, and information science) it was revived in policy and economic circles in the 1970s with a new meaning. Information technology now described the expected convergence of the computing, media, and telecommunications industries (and their technologies), understood within the broader context of a wave of enthusiasm for the computer revolution, post-industrial society, information society (Webster, 1995), and other fashionable expressions of the belief that new electronic technologies were bringing a profound rupture with the past. As it spread broadly during the 1980s, IT increasingly lost its association with communications (and, alas, any vestigial connection to the idea of anybody actually being informed of anything) to become a new and more pretentious way of saying "computer". The final step in this process is the recent surge in references to "information and communication technologies" or ICTs, a coinage that makes sense only if one assumes that a technology can inform without communicating". Some people use the term information technology about technologies used before the development of the computer. This is however to use the term as a retronym. =

Collective operation

Collective operations are building blocks for interaction patterns, that are often used in SPMD algorithms in the parallel programming context. Hence, there is an interest in efficient realizations of these operations. A realization of the collective operations is provided by the Message Passing Interface (MPI). == Definitions == In all asymptotic runtime functions, we denote the latency α {\displaystyle \alpha } (or startup time per message, independent of message size), the communication cost per word β {\displaystyle \beta } , the number of processing units p {\displaystyle p} and the input size per node n {\displaystyle n} . In cases where we have initial messages on more than one node we assume that all local messages are of the same size. To address individual processing units we use p i ∈ { p 0 , p 1 , … , p p − 1 } {\displaystyle p_{i}\in \{p_{0},p_{1},\dots ,p_{p-1}\}} . If we do not have an equal distribution, i.e. node p i {\displaystyle p_{i}} has a message of size n i {\displaystyle n_{i}} , we get an upper bound for the runtime by setting n = max ( n 0 , n 1 , … , n p − 1 ) {\displaystyle n=\max(n_{0},n_{1},\dots ,n_{p-1})} . A distributed memory model is assumed. The concepts are similar for the shared memory model. However, shared memory systems can provide hardware support for some operations like broadcast (§ Broadcast) for example, which allows convenient concurrent read. Thus, new algorithmic possibilities can become available. == Broadcast == The broadcast pattern is used to distribute data from one processing unit to all processing units, which is often needed in SPMD parallel programs to dispense input or global values. Broadcast can be interpreted as an inverse version of the reduce pattern (§ Reduce). Initially only root r {\displaystyle r} with i d {\displaystyle id} 0 {\displaystyle 0} stores message m {\displaystyle m} . During broadcast m {\displaystyle m} is sent to the remaining processing units, so that eventually m {\displaystyle m} is available to all processing units. Since an implementation by means of a sequential for-loop with p − 1 {\displaystyle p-1} iterations becomes a bottleneck, divide-and-conquer approaches are common. One possibility is to utilize a binomial tree structure with the requirement that p {\displaystyle p} has to be a power of two. When a processing unit is responsible for sending m {\displaystyle m} to processing units i . . j {\displaystyle i..j} , it sends m {\displaystyle m} to processing unit ⌈ ( i + j ) / 2 ⌉ {\displaystyle \left\lceil (i+j)/2\right\rceil } and delegates responsibility for the processing units ⌈ ( i + j ) / 2 ⌉ . . j {\displaystyle \left\lceil (i+j)/2\right\rceil ..j} to it, while its own responsibility is cut down to i . . ⌈ ( i + j ) / 2 ⌉ − 1 {\displaystyle i..\left\lceil (i+j)/2\right\rceil -1} . Binomial trees have a problem with long messages m {\displaystyle m} . The receiving unit of m {\displaystyle m} can only propagate the message to other units, after it received the whole message. In the meantime, the communication network is not utilized. Therefore pipelining on binary trees is used, where m {\displaystyle m} is split into an array of k {\displaystyle k} packets of size ⌈ n / k ⌉ {\displaystyle \left\lceil n/k\right\rceil } . The packets are then broadcast one after another, so that data is distributed fast in the communication network. Pipelined broadcast on balanced binary tree is possible in O ( α log ⁡ p + β n ) {\displaystyle {\mathcal {O}}(\alpha \log p+\beta n)} , whereas for the non-pipelined case it takes O ( ( α + β n ) log ⁡ p ) {\displaystyle {\mathcal {O}}((\alpha +\beta n)\log p)} cost. == Reduce == The reduce pattern is used to collect data or partial results from different processing units and to combine them into a global result by a chosen operator. Given p {\displaystyle p} processing units, message m i {\displaystyle m_{i}} is on processing unit p i {\displaystyle p_{i}} initially. All m i {\displaystyle m_{i}} are aggregated by ⊗ {\displaystyle \otimes } and the result is eventually stored on p 0 {\displaystyle p_{0}} . The reduction operator ⊗ {\displaystyle \otimes } must be associative at least. Some algorithms require a commutative operator with a neutral element. Operators like s u m {\displaystyle sum} , m i n {\displaystyle min} , m a x {\displaystyle max} are common. Implementation considerations are similar to broadcast (§ Broadcast). For pipelining on binary trees the message must be representable as a vector of smaller object for component-wise reduction. Pipelined reduce on a balanced binary tree is possible in O ( α log ⁡ p + β n ) {\displaystyle {\mathcal {O}}(\alpha \log p+\beta n)} . == All-Reduce == The all-reduce pattern (also called allreduce) is used if the result of a reduce operation (§ Reduce) must be distributed to all processing units. Given p {\displaystyle p} processing units, message m i {\displaystyle m_{i}} is on processing unit p i {\displaystyle p_{i}} initially. All m i {\displaystyle m_{i}} are aggregated by an operator ⊗ {\displaystyle \otimes } and the result is eventually stored on all p i {\displaystyle p_{i}} . Analog to the reduce operation, the operator ⊗ {\displaystyle \otimes } must be at least associative. All-reduce can be interpreted as a reduce operation with a subsequent broadcast (§ Broadcast). For long messages a corresponding implementation is suitable, whereas for short messages, the latency can be reduced by using a hypercube (Hypercube (communication pattern) § All-Gather/ All-Reduce) topology, if p {\displaystyle p} is a power of two. All-reduce can also be implemented with a butterfly algorithm and achieve optimal latency and bandwidth. All-reduce is possible in O ( α log ⁡ p + β n ) {\displaystyle {\mathcal {O}}(\alpha \log p+\beta n)} , since reduce and broadcast are possible in O ( α log ⁡ p + β n ) {\displaystyle {\mathcal {O}}(\alpha \log p+\beta n)} with pipelining on balanced binary trees. All-reduce implemented with a butterfly algorithm achieves the same asymptotic runtime. == Prefix-Sum/Scan == The prefix-sum or scan operation is used to collect data or partial results from different processing units and to compute intermediate results by an operator, which are stored on those processing units. It can be seen as a generalization of the reduce operation (§ Reduce). Given p {\displaystyle p} processing units, message m i {\displaystyle m_{i}} is on processing unit p i {\displaystyle p_{i}} . The operator ⊗ {\displaystyle \otimes } must be at least associative, whereas some algorithms require also a commutative operator and a neutral element. Common operators are s u m {\displaystyle sum} , m i n {\displaystyle min} and m a x {\displaystyle max} . Eventually processing unit p i {\displaystyle p_{i}} stores the prefix sum ⊗ i ′ <= i {\displaystyle \otimes _{i'<=i}} m i ′ {\displaystyle m_{i'}} . In the case of the so-called exclusive prefix sum, processing unit p i {\displaystyle p_{i}} stores the prefix sum ⊗ i ′ < i {\displaystyle \otimes _{i'

Pixlr

Pixlr is a group of SaaS creative tools including Pixlr.com, Designs.ai and Vectr.com. Pixlr.com is a cloud-based set of image editing tools and utilities, including AI image generation and enhancements. The Pixlr suite targets users who require subjectively simple, or more advanced, photo editing as well as graphic design. It features a freemium business model with subscription plans—Plus, Premium and Teams. The platform can be used on desktop and also smartphones and tablets. Pixlr is compatible with various image formats such as JPEG, PNG, WEBP, GIF, PSD (Photoshop Document) and PXZ (native Pixlr document format). Designs.ai lets users create content using AI, with a goal of being within two minutes, across different media types including videos, text, banners and audio. Vectr.com was acquired in 2017 before being spun out into Pixlr Group in 2023. == History == Pixlr was founded in 2008 and built on Macromedia Flash. On 19 July 2011, Autodesk announced that they had acquired the Pixlr suite. In 2013, Time listed Pixlr as one of the top 50 websites of the year. In 2017, Pixlr was acquired from Autodesk. It was subsequently rebuilt and relaunched in HTML5 in 2019. In September 2023, Pixlr was awarded as the Top 13 GenAi Web Product by the world's top venture firm Andreessen Horowitz. In November 2023, Pixlr, Designs.ai and Vectr were combined as a new business group named Pixlr Group focusing on generative AI and creative software solutions. In May 2024, Pixlr was featured as one of the top 18 progressive web applications highlighted on Google I/O. == Versions == Pixlr.com rebranded itself as a full creative suite in 2019 by introducing Pixlr X, Pixlr E and Pixlr M. The platform introduced more features in December 2021 with a new logo and added tools which included: Brushes, the 'Heal tool', Animation, and Batch upload. The brush feature enables the creation of hand-drawn effects. The Heal tool allows users to remove unwanted objects from their images whereas the Animation feature can be used to include movements into their edits. Users can also utilize Batch upload to edit up to 50 images simultaneously. In November 2022, Pixlr 2023 was launched, adding more tools such as "AI smart resize", colorization, text wrapping and other additional effects. In November 2023, Pixlr 2024 was launched with Pixlr Designer and new AI-powered updates which includes AI image generation, AI infill, AI inpainting and more.

Hall circles

Hall circles (also known as M-circles and N-circles) are a graphical tool in control theory used to obtain values of a closed-loop transfer function from the Nyquist plot (or the Nichols plot) of the associated open-loop transfer function. Hall circles have been introduced in control theory by Albert C. Hall in his thesis. == Construction == Consider a closed-loop linear control system with open-loop transfer function given by transfer function G ( s ) {\displaystyle G(s)} and with a unit gain in the feedback loop. The closed-loop transfer function is given by T ( s ) = G ( s ) 1 + G ( s ) {\textstyle T(s)={\frac {G(s)}{1+G(s)}}} . To check the stability of T(s), it is possible to use the Nyquist stability criterion with the Nyquist plot of the open-loop transfer function G(s). Note, however, that the Nyquist plot of G(s) does not give the actual values of T(s). To get this information from the G(s)-plane, Hall proposed to construct the locus of points in the G(s)-plane such that T(s) has constant magnitude and also the locus of points in the G(s)-plane such that T(s) has constant phase angle. Given a positive real value M representing a fixed magnitude, and denoting G(s) by z, the points satisfying M = | T ( s ) | = | G ( s ) | | 1 + G ( s ) | = | z | | 1 + z | {\displaystyle M=|T(s)|={\frac {|G(s)|}{|1+G(s)|}}={\frac {|z|}{|1+z|}}} are given by the points z in the G(s)-plane such that the ratio of the distance between z and 0 and the distance between z and -1 is equal to M. The points z satisfying this locus condition are circles of Apollonius, and this locus is known in the context of control systems as M-circles. Given a positive real value N representing a phase angle, the points satisfying N = arg ⁡ [ G ( s ) 1 + G ( s ) ] = arg ⁡ [ G ( s ) ] − arg ⁡ [ 1 + G ( s ) ] = arg ⁡ [ z ] − arg ⁡ [ 1 + z ] {\displaystyle N=\arg \left[{\frac {G(s)}{1+G(s)}}\right]=\arg[G(s)]-\arg[1+G(s)]=\arg[z]-\arg[1+z]} are given by the points z in the G(s)-plane such that the angle between -1 and z and the angle between 0 and z is constant. In other words, the angle opposed to the line segment between -1 and 0 must be constant. This implies that the points z satisfying this locus condition are arcs of circles, and this locus is known in the context of control systems as N-circles. == Usage == To use the Hall circles, a plot of M and N circles is done over the Nyquist plot of the open-loop transfer function. The points of the intersection between these graphics give the corresponding value of the closed-loop transfer function. Hall circles are also used with the Nichols plot and in this setting, are also known as Nichols chart. Rather than overlaying directly the Hall circles over the Nichols plot, the points of the circles are transferred to a new coordinate system where the ordinate is given by 20 log 10 ⁡ ( | G ( s ) | ) {\displaystyle 20\log _{10}(|G(s)|)} and the abscissa is given by arg ⁡ ( G ( s ) ) {\displaystyle \arg(G(s))} . The advantage of using Nichols chart is that adjusting the gain of the open loop transfer function directly reflects in up and down translation of the Nichols plot in the chart.