Maximum Variance Unfolding (MVU), also known as Semidefinite Embedding (SDE), is an algorithm in computer science that uses semidefinite programming to perform non-linear dimensionality reduction of high-dimensional vectorial input data. It is motivated by the observation that kernel Principal Component Analysis (kPCA) does not reduce the data dimensionality, as it leverages the Kernel trick to non-linearly map the original data into an inner-product space. == Algorithm == MVU creates a mapping from the high dimensional input vectors to some low dimensional Euclidean vector space in the following steps: A neighbourhood graph is created. Each input is connected with its k-nearest input vectors (according to Euclidean distance metric) and all k-nearest neighbors are connected with each other. If the data is sampled well enough, the resulting graph is a discrete approximation of the underlying manifold. The neighbourhood graph is "unfolded" with the help of semidefinite programming. Instead of learning the output vectors directly, the semidefinite programming aims to find an inner product matrix that maximizes the pairwise distances between any two inputs that are not connected in the neighbourhood graph while preserving the nearest neighbors distances. The low-dimensional embedding is finally obtained by application of multidimensional scaling on the learned inner product matrix. The steps of applying semidefinite programming followed by a linear dimensionality reduction step to recover a low-dimensional embedding into a Euclidean space were first proposed by Linial, London, and Rabinovich. == Optimization formulation == Let X {\displaystyle X\,\!} be the original input and Y {\displaystyle Y\,\!} be the embedding. If i , j {\displaystyle i,j\,\!} are two neighbors, then the local isometry constraint that needs to be satisfied is: | X i − X j | 2 = | Y i − Y j | 2 {\displaystyle |X_{i}-X_{j}|^{2}=|Y_{i}-Y_{j}|^{2}\,\!} Let G , K {\displaystyle G,K\,\!} be the Gram matrices of X {\displaystyle X\,\!} and Y {\displaystyle Y\,\!} (i.e.: G i j = X i ⋅ X j , K i j = Y i ⋅ Y j {\displaystyle G_{ij}=X_{i}\cdot X_{j},K_{ij}=Y_{i}\cdot Y_{j}\,\!} ). We can express the above constraint for every neighbor points i , j {\displaystyle i,j\,\!} in term of G , K {\displaystyle G,K\,\!} : G i i + G j j − G i j − G j i = K i i + K j j − K i j − K j i {\displaystyle G_{ii}+G_{jj}-G_{ij}-G_{ji}=K_{ii}+K_{jj}-K_{ij}-K_{ji}\,\!} In addition, we also want to constrain the embedding Y {\displaystyle Y\,\!} to center at the origin: 0 = | ∑ i Y i | 2 ⇔ ( ∑ i Y i ) ⋅ ( ∑ i Y i ) ⇔ ∑ i , j Y i ⋅ Y j ⇔ ∑ i , j K i j {\displaystyle 0=|\sum _{i}Y_{i}|^{2}\Leftrightarrow (\sum _{i}Y_{i})\cdot (\sum _{i}Y_{i})\Leftrightarrow \sum _{i,j}Y_{i}\cdot Y_{j}\Leftrightarrow \sum _{i,j}K_{ij}} As described above, except the distances of neighbor points are preserved, the algorithm aims to maximize the pairwise distance of every pair of points. The objective function to be maximized is: T ( Y ) = 1 2 N ∑ i , j | Y i − Y j | 2 {\displaystyle T(Y)={\dfrac {1}{2N}}\sum _{i,j}|Y_{i}-Y_{j}|^{2}} Intuitively, maximizing the function above is equivalent to pulling the points as far away from each other as possible and therefore "unfold" the manifold. The local isometry constraint Let τ = m a x { η i j | Y i − Y j | 2 } {\displaystyle \tau =max\{\eta _{ij}|Y_{i}-Y_{j}|^{2}\}\,\!} where η i j := { 1 if i is a neighbour of j 0 otherwise . {\displaystyle \eta _{ij}:={\begin{cases}1&{\mbox{if}}\ i{\mbox{ is a neighbour of }}j\\0&{\mbox{otherwise}}.\end{cases}}} prevents the objective function from diverging (going to infinity). Since the graph has N points, the distance between any two points | Y i − Y j | 2 ≤ N τ {\displaystyle |Y_{i}-Y_{j}|^{2}\leq N\tau \,\!} . We can then bound the objective function as follows: T ( Y ) = 1 2 N ∑ i , j | Y i − Y j | 2 ≤ 1 2 N ∑ i , j ( N τ ) 2 = N 3 τ 2 2 {\displaystyle T(Y)={\dfrac {1}{2N}}\sum _{i,j}|Y_{i}-Y_{j}|^{2}\leq {\dfrac {1}{2N}}\sum _{i,j}(N\tau )^{2}={\dfrac {N^{3}\tau ^{2}}{2}}\,\!} The objective function can be rewritten purely in the form of the Gram matrix: T ( Y ) = 1 2 N ∑ i , j | Y i − Y j | 2 = 1 2 N ∑ i , j ( Y i 2 + Y j 2 − Y i ⋅ Y j − Y j ⋅ Y i ) = 1 2 N ( ∑ i , j Y i 2 + ∑ i , j Y j 2 − ∑ i , j Y i ⋅ Y j − ∑ i , j Y j ⋅ Y i ) = 1 2 N ( ∑ i , j Y i 2 + ∑ i , j Y j 2 − 0 − 0 ) = 1 N ( ∑ i Y i 2 ) = 1 N ( T r ( K ) ) {\displaystyle {\begin{aligned}T(Y)&{}={\dfrac {1}{2N}}\sum _{i,j}|Y_{i}-Y_{j}|^{2}\\&{}={\dfrac {1}{2N}}\sum _{i,j}(Y_{i}^{2}+Y_{j}^{2}-Y_{i}\cdot Y_{j}-Y_{j}\cdot Y_{i})\\&{}={\dfrac {1}{2N}}(\sum _{i,j}Y_{i}^{2}+\sum _{i,j}Y_{j}^{2}-\sum _{i,j}Y_{i}\cdot Y_{j}-\sum _{i,j}Y_{j}\cdot Y_{i})\\&{}={\dfrac {1}{2N}}(\sum _{i,j}Y_{i}^{2}+\sum _{i,j}Y_{j}^{2}-0-0)\\&{}={\dfrac {1}{N}}(\sum _{i}Y_{i}^{2})={\dfrac {1}{N}}(Tr(K))\\\end{aligned}}\,\!} Finally, the optimization can be formulated as: Maximize T r ( K ) subject to K ⪰ 0 , ∑ i j K i j = 0 and G i i + G j j − G i j − G j i = K i i + K j j − K i j − K j i , ∀ i , j where η i j = 1 , {\displaystyle {\begin{aligned}&{\text{Maximize}}&&Tr(\mathbf {K} )\\&{\text{subject to}}&&\mathbf {K} \succeq 0,\sum _{ij}\mathbf {K} _{ij}=0\\&{\text{and}}&&G_{ii}+G_{jj}-G_{ij}-G_{ji}=K_{ii}+K_{jj}-K_{ij}-K_{ji},\forall i,j{\mbox{ where }}\eta _{ij}=1,\end{aligned}}} After the Gram matrix K {\displaystyle K\,\!} is learned by semidefinite programming, the output Y {\displaystyle Y\,\!} can be obtained via Cholesky decomposition. In particular, the Gram matrix can be written as K i j = ∑ α = 1 N ( λ α V α i V α j ) {\displaystyle K_{ij}=\sum _{\alpha =1}^{N}(\lambda _{\alpha }V_{\alpha i}V_{\alpha j})\,\!} where V α i {\displaystyle V_{\alpha i}\,\!} is the i-th element of eigenvector V α {\displaystyle V_{\alpha }\,\!} of the eigenvalue λ α {\displaystyle \lambda _{\alpha }\,\!} . It follows that the α {\displaystyle \alpha \,\!} -th element of the output Y i {\displaystyle Y_{i}\,\!} is λ α V α i {\displaystyle {\sqrt {\lambda _{\alpha }}}V_{\alpha i}\,\!} .
Developmental robotics
Developmental robotics (DevRob), sometimes called epigenetic robotics, is a scientific field which aims at studying the developmental mechanisms, architectures and constraints that allow lifelong and open-ended learning of new skills and new knowledge in embodied machines. As in human children, learning is expected to be cumulative and of progressively increasing complexity, and to result from self-exploration of the world in combination with social interaction. The typical methodological approach consists in starting from theories of human and animal development elaborated in fields such as developmental psychology, neuroscience, developmental and evolutionary biology, and linguistics, then to formalize and implement them in robots, sometimes exploring extensions or variants of them. The experimentation of those models in robots allows researchers to confront them with reality, and as a consequence, developmental robotics also provides feedback and novel hypotheses on theories of human and animal development. Developmental robotics is related to but differs from evolutionary robotics (ER). ER uses populations of robots that evolve over time, whereas DevRob is interested in how the organization of a single robot's control system develops through experience, over time. DevRob is also related to work done in the domains of robotics and artificial life. == Background == Can a robot learn like a child? Can it learn a variety of new skills and new knowledge unspecified at design time and in a partially unknown and changing environment? How can it discover its body and its relationships with the physical and social environment? How can its cognitive capacities continuously develop without the intervention of an engineer once it is "out of the factory"? What can it learn through natural social interactions with humans? These are the questions at the center of developmental robotics. Alan Turing, as well as a number of other pioneers of cybernetics, already formulated those questions and the general approach in 1950, but it is only since the end of the 20th century that they began to be investigated systematically. Because the concept of adaptive intelligent machines is central to developmental robotics, it has relationships with fields such as artificial intelligence, machine learning, cognitive robotics or computational neuroscience. Yet, while it may reuse some of the techniques elaborated in these fields, it differs from them from many perspectives. It differs from classical artificial intelligence because it does not assume the capability of advanced symbolic reasoning and focuses on embodied and situated sensorimotor and social skills rather than on abstract symbolic problems. It differs from cognitive robotics because it focuses on the processes that allow the formation of cognitive capabilities rather than these capabilities themselves. It differs from computational neuroscience because it focuses on functional modeling of integrated architectures of development and learning. More generally, developmental robotics is uniquely characterized by the following three features: It targets task-independent architectures and learning mechanisms, i.e. the machine/robot has to be able to learn new tasks that are unknown by the engineer; It emphasizes open-ended development and lifelong learning, i.e. the capacity of an organism to acquire continuously novel skills. This should not be understood as a capacity for learning "anything" or even “everything”, but just that the set of skills that is acquired can be infinitely extended at least in some (not all) directions; The complexity of acquired knowledge and skills shall increase (and the increase be controlled) progressively. Developmental robotics emerged at the crossroads of several research communities including embodied artificial intelligence, enactive and dynamical systems cognitive science, connectionism. Starting from the essential idea that learning and development happen as the self-organized result of the dynamical interactions among brains, bodies and their physical and social environment, and trying to understand how this self-organization can be harnessed to provide task-independent lifelong learning of skills of increasing complexity, developmental robotics strongly interacts with fields such as developmental psychology, developmental and cognitive neuroscience, developmental biology (embryology), evolutionary biology, and cognitive linguistics. As many of the theories coming from these sciences are verbal and/or descriptive, this implies a crucial formalization and computational modeling activity in developmental robotics. These computational models are then not only used as ways to explore how to build more versatile and adaptive machines but also as a way to evaluate their coherence and possibly explore alternative explanations for understanding biological development. == Research directions == === Skill domains === Due to the general approach and methodology, developmental robotics projects typically focus on having robots develop the same types of skills as human infants. A first category that is important being investigated is the acquisition of sensorimotor skills. These include the discovery of one's own body, including its structure and dynamics such as hand-eye coordination, locomotion, and interaction with objects as well as tool use, with a particular focus on the discovery and learning of affordances. A second category of skills targeted by developmental robots are social and linguistic skills: the acquisition of simple social behavioural games such as turn-taking, coordinated interaction, lexicons, syntax and grammar, and the grounding of these linguistic skills into sensorimotor skills (sometimes referred as symbol grounding). In parallel, the acquisition of associated cognitive skills are being investigated such as the emergence of the self/non-self distinction, the development of attentional capabilities, of categorization systems and higher-level representations of affordances or social constructs, of the emergence of values, empathy, or theories of mind. === Mechanisms and constraints === The sensorimotor and social spaces in which humans and robot live are so large and complex that only a small part of potentially learnable skills can actually be explored and learnt within a life-time. Thus, mechanisms and constraints are necessary to guide developmental organisms in their development and control of the growth of complexity. There are several important families of these guiding mechanisms and constraints which are studied in developmental robotics, all inspired by human development: Motivational systems, generating internal reward signals that drive exploration and learning, which can be of two main types: extrinsic motivations push robots/organisms to maintain basic specific internal properties such as food and water level, physical integrity, or light (e.g. in phototropic systems); intrinsic motivations push robot to search for novelty, challenge, compression or learning progress per se, thus generating what is sometimes called curiosity-driven learning and exploration, or alternatively active learning and exploration; Social guidance: as humans learn a lot by interacting with their peers, developmental robotics investigates mechanisms that can allow robots to participate to human-like social interaction. By perceiving and interpreting social cues, this may allow robots both to learn from humans (through diverse means such as imitation, emulation, stimulus enhancement, demonstration, etc. ...) and to trigger natural human pedagogy. Thus, social acceptance of developmental robots is also investigated; Statistical inference biases and cumulative knowledge/skill reuse: biases characterizing both representations/encodings and inference mechanisms can typically allow considerable improvement of the efficiency of learning and are thus studied. Related to this, mechanisms allowing to infer new knowledge and acquire new skills by reusing previously learnt structures is also an essential field of study; The properties of embodiment, including geometry, materials, or innate motor primitives/synergies often encoded as dynamical systems, can considerably simplify the acquisition of sensorimotor or social skills, and is sometimes referred as morphological computation. The interaction of these constraints with other constraints is an important axis of investigation; Maturational constraints: In human infants, both the body and the neural system grow progressively, rather than being full-fledged already at birth. This implies, for example, that new degrees of freedom, as well as increases of the volume and resolution of available sensorimotor signals, may appear as learning and development unfold. Transposing these mechanisms in developmental robots, and understanding how it may hinder or on the contrary ease the acquisition of novel complex skills is a central questi
Netomi
Netomi, formerly msg.ai, is an American artificial intelligence company and developer of chatbot technologies. == History == msg.ai was founded in May 2015 by Puneet Mehta. msg.ai worked with Sony Pictures to launch a chat bot on Facebook Messenger for a $100M film, Goosebumps and subsequently joined Y Combinator as a member of the Winter 2016 class. Later that year and in 2017, msg.ai completed two rounds of seed funding, led by Y Combinator and Index Ventures. In 2018, the company changed its name to Netomi. In 2019, the company raised $14.7 million in a Series A funding round also led by Index Ventures. In 2021, the company raised $30 million in a Series B funding round led by WndrCo LLC.
AsoSoft text corpus
The AsoSoft text corpus is the first large-scale Kurdish text corpus, collected and processed by the AsoSoft research and development group. It contains 458,000 documents (188 million tokens) that are collected from sources such as websites, news agencies, books, and magazines. The corpus is partially tagged by topic, so it can be used for topic identification tasks. Also, it is applicable for extracting language model and computational lexicon information. Part of the corpus (75 million tokens) is available online for non-commercial use. The corpus uses the TEI format.
Image registration
Image registration is the process of transforming different sets of data into one coordinate system. Data may be multiple photographs, data from different sensors, times, depths, or viewpoints. It is used in computer vision, medical imaging, military automatic target recognition, and compiling and analyzing images and data from satellites. Registration is necessary in order to be able to compare or integrate the data obtained from these different measurements. == Algorithm classification == === Intensity-based vs feature-based === Image registration or image alignment algorithms can be classified into intensity-based and feature-based. One of the images is referred to as the target, fixed or sensed image and the others are referred to as the moving or source images. Image registration involves spatially transforming the source/moving image(s) to align with the target image. The reference frame in the target image is stationary, while the other datasets are transformed to match to the target. Intensity-based methods compare intensity patterns in images via correlation metrics, while feature-based methods find correspondence between image features such as points, lines, and contours. Intensity-based methods register entire images or sub-images. If sub-images are registered, centers of corresponding sub images are treated as corresponding feature points. Feature-based methods establish a correspondence between a number of especially distinct points in images. Knowing the correspondence between a number of points in images, a geometrical transformation is then determined to map the target image to the reference images, thereby establishing point-by-point correspondence between the reference and target images. Methods combining intensity-based and feature-based information have also been developed. === Transformation models === Image registration algorithms can also be classified according to the transformation models they use to relate the target image space to the reference image space. The first broad category of transformation models includes affine transformations, which include rotation, scaling, translation and shearing. Affine transformations are global in nature, thus, they cannot model local geometric differences between images. The second category of transformations allow 'elastic' or 'nonrigid' transformations. These transformations are capable of locally warping the target image to align with the reference image. Nonrigid transformations include radial basis functions (thin-plate or surface splines, multiquadrics, and compactly-supported transformations), physical continuum models (viscous fluids), and large deformation models (diffeomorphisms). Transformations are commonly described by a parametrization, where the model dictates the number of parameters. For instance, the translation of a full image can be described by a translation vector parameter. These models are called parametric models. Non-parametric models on the other hand, do not follow any parameterization, allowing each image element to be displaced arbitrarily. There are a number of programs that implement both estimation and application of a warp-field. It is a part of the SPM and AIR programs. === Transformations of coordinates via the law of function composition rather than addition === Alternatively, many advanced methods for spatial normalization are building on structure preserving transformations homeomorphisms and diffeomorphisms since they carry smooth submanifolds smoothly during transformation. Diffeomorphisms are generated in the modern field of Computational Anatomy based on flows since diffeomorphisms are not additive although they form a group, but a group under the law of function composition. For this reason, flows which generalize the ideas of additive groups allow for generating large deformations that preserve topology, providing 1-1 and onto transformations. Computational methods for generating such transformation are often called LDDMM which provide flows of diffeomorphisms as the main computational tool for connecting coordinate systems corresponding to the geodesic flows of Computational Anatomy. There are a number of programs which generate diffeomorphic transformations of coordinates via diffeomorphic mapping including MRI Studio and MRI Cloud.org === Spatial vs frequency domain methods === Spatial methods operate in the image domain, matching intensity patterns or features in images. Some of the feature matching algorithms are outgrowths of traditional techniques for performing manual image registration, in which an operator chooses corresponding control points (CP) in images. When the number of control points exceeds the minimum required to define the appropriate transformation model, iterative algorithms like RANSAC can be used to robustly estimate the parameters of a particular transformation type (e.g. affine) for registration of the images. Frequency-domain methods find the transformation parameters for registration of the images while working in the transform domain. Such methods work for simple transformations, such as translation, rotation, and scaling. Applying the phase correlation method to a pair of images produces a third image which contains a single peak. The location of this peak corresponds to the relative translation between the images. Unlike many spatial-domain algorithms, the phase correlation method is resilient to noise, occlusions, and other defects typical of medical or satellite images. Additionally, the phase correlation uses the fast Fourier transform to compute the cross-correlation between the two images, generally resulting in large performance gains. The method can be extended to determine rotation and scaling differences between two images by first converting the images to log-polar coordinates. Due to properties of the Fourier transform, the rotation and scaling parameters can be determined in a manner invariant to translation. === Single- vs multi-modality methods === Another classification can be made between single-modality and multi-modality methods. Single-modality methods tend to register images in the same modality acquired by the same scanner/sensor type, while multi-modality registration methods tended to register images acquired by different scanner/sensor types. Multi-modality registration methods are often used in medical imaging as images of a subject are frequently obtained from different scanners. Examples include registration of brain CT/MRI images or whole body PET/CT images for tumor localization, registration of contrast-enhanced CT images against non-contrast-enhanced CT images for segmentation of specific parts of the anatomy, and registration of ultrasound and CT images for prostate localization in radiotherapy. === Automatic vs interactive methods === Registration methods may be classified based on the level of automation they provide. Manual, interactive, semi-automatic, and automatic methods have been developed. Manual methods provide tools to align the images manually. Interactive methods reduce user bias by performing certain key operations automatically while still relying on the user to guide the registration. Semi-automatic methods perform more of the registration steps automatically but depend on the user to verify the correctness of a registration. Automatic methods do not allow any user interaction and perform all registration steps automatically. === Similarity measures for image registration === Image similarities are broadly used in medical imaging. An image similarity measure quantifies the degree of similarity between intensity patterns in two images. The choice of an image similarity measure depends on the modality of the images to be registered. Common examples of image similarity measures include cross-correlation, mutual information, sum of squared intensity differences, and ratio image uniformity. Mutual information and normalized mutual information are the most popular image similarity measures for registration of multimodality images. Cross-correlation, sum of squared intensity differences and ratio image uniformity are commonly used for registration of images in the same modality. Many new features have been derived for cost functions based on matching methods via large deformations have emerged in the field Computational Anatomy including Measure matching which are pointsets or landmarks without correspondence, Curve matching and Surface matching via mathematical currents and varifolds. == Uncertainty == There is a level of uncertainty associated with registering images that have any spatio-temporal differences. A confident registration with a measure of uncertainty is critical for many change detection applications such as medical diagnostics. In remote sensing applications where a digital image pixel may represent several kilometers of spatial distance (such as NASA's LANDSAT imagery), an uncertain image registration can mean that a solution could b
Open-source software security
Open-source software security is the measure of assurance or guarantee in the freedom from danger and risk inherent to an open-source software system. == Implementation debate == === Benefits === Proprietary software forces the user to accept the level of security that the software vendor is willing to deliver and to accept the rate that patches and updates are released. It is assumed that any compiler that is used creates code that can be trusted, but it has been demonstrated by Ken Thompson that a compiler can be subverted using a compiler backdoor to create faulty executables that are unwittingly produced by a well-intentioned developer. With access to the source code for the compiler, the developer has at least the ability to discover if there is any mal-intention. Kerckhoffs' principle is based on the idea that an enemy can steal a secure military system and not be able to compromise the information. His ideas were the basis for many modern security practices, and followed that security through obscurity is a bad practice. === Drawbacks === Simply making source code available does not guarantee review. An example of this occurring is when Marcus Ranum, an expert on security system design and implementation, released his first public firewall toolkit. At one time, there were over 2,000 sites using his toolkit, but only 10 people gave him any feedback or patches. Having a large amount of eyes reviewing code can "lull a user into a false sense of security". Having many users look at source code does not guarantee that security flaws will be found and fixed. == Metrics and models == There are a variety of models and metrics to measure the security of a system. These are a few methods that can be used to measure the security of software systems. === Number of days between vulnerabilities === It is argued that a system is most vulnerable after a potential vulnerability is discovered, but before a patch is created. By measuring the number of days between the vulnerability and when the vulnerability is fixed, a basis can be determined on the security of the system. There are a few caveats to such an approach: not every vulnerability is equally bad, and fixing a lot of bugs quickly might not be better than only finding a few and taking a little bit longer to fix them, taking into account the operating system, or the effectiveness of the fix. === Poisson process === The Poisson process can be used to measure the rates at which different people find security flaws between open and closed source software. The process can be broken down by the number of volunteers Nv and paid reviewers Np. The rates at which volunteers find a flaw is measured by λv and the rate that paid reviewers find a flaw is measured by λp. The expected time that a volunteer group is expected to find a flaw is 1/(Nv λv) and the expected time that a paid group is expected to find a flaw is 1/(Np λp). === Morningstar model === By comparing a large variety of open source and closed source projects a star system could be used to analyze the security of the project similar to how Morningstar, Inc. rates mutual funds. With a large enough data set, statistics could be used to measure the overall effectiveness of one group over the other. An example of such as system is as follows: 1 Star: Many security vulnerabilities. 2 Stars: Reliability issues. 3 Stars: Follows best security practices. 4 Stars: Documented secure development process. 5 Stars: Passed independent security review. === Coverity scan === Coverity in collaboration with Stanford University has established a new baseline for open-source quality and security. The development is being completed through a contract with the Department of Homeland Security. They are utilizing innovations in automated defect detection to identify critical types of bugs found in software. The level of quality and security is measured in rungs. Rungs do not have a definitive meaning, and can change as Coverity releases new tools. Rungs are based on the progress of fixing issues found by the Coverity Analysis results and the degree of collaboration with Coverity. They start with Rung 0 and currently go up to Rung 2. Rung 0 The project has been analyzed by Coverity's Scan infrastructure, but no representatives from the open-source software have come forward for the results. Rung 1 At rung 1, there is collaboration between Coverity and the development team. The software is analyzed with a subset of the scanning features to prevent the development team from being overwhelmed. Rung 2 There are 11 projects that have been analyzed and upgraded to the status of Rung 2 by reaching zero defects in the first year of the scan. These projects include: AMANDA, ntp, OpenPAM, OpenVPN, Overdose, Perl, PHP, Postfix, Python, Samba, and Tcl.
Language resource
In linguistics and language technology, a language resource is a "[composition] of linguistic material used in the construction, improvement and/or evaluation of language processing applications, (...) in language and language-mediated research studies and applications." According to Bird & Simons (2003), this includes data, i.e. "any information that documents or describes a language, such as a published monograph, a computer data file, or even a shoebox full of handwritten index cards. The information could range in content from unanalyzed sound recordings to fully transcribed and annotated texts to a complete descriptive grammar", tools, i.e., "computational resources that facilitate creating, viewing, querying, or otherwise using language data", and advice, i.e., "any information about what data sources are reliable, what tools are appropriate in a given situation, what practices to follow when creating new data". The latter aspect is usually referred to as "best practices" or "(community) standards". In a narrower sense, language resource is specifically applied to resources that are available in digital form, and then, "encompassing (a) data sets (textual, multimodal/multimedia and lexical data, grammars, language models, etc.) in machine readable form, and (b) tools/technologies/services used for their processing and management". == Typology == As of May 2020, no widely used standard typology of language resources has been established (current proposals include the LREMap, METASHARE, and, for data, the LLOD classification). Important classes of language resources include data lexical resources, e.g., machine-readable dictionaries, linguistic corpora, i.e., digital collections of natural language data, linguistic data bases such as the Cross-Linguistic Linked Data collection, tools linguistic annotations and tools for creating such annotations in a manual or semiautomated fashion (e.g., tools for annotating interlinear glossed text such as Toolbox and FLEx, or other language documentation tools), applications for search and retrieval over such data (corpus management systems), for automated annotation (part-of-speech tagging, syntactic parsing, semantic parsing, etc.), metadata and vocabularies vocabularies, repositories of linguistic terminology and language metadata, e.g., MetaShare (for language resource metadata), the ISO 12620 data category registry (for linguistic features, data structures and annotations within a language resource), or the Glottolog database (identifiers for language varieties and bibliographical database). == Language resource publication, dissemination and creation == A major concern of the language resource community has been to develop infrastructures and platforms to present, discuss and disseminate language resources. Selected contributions in this regard include: a series of International Conferences on Language Resources and Evaluation (LREC), the European Language Resources Association (ELRA, EU-based), and the Linguistic Data Consortium (LDC, US-based), which represent commercial hosting and dissemination platforms for language resources, the Open Languages Archives Community (OLAC), which provides and aggregates language resource metadata, the Language Resources and Evaluation Journal (LREJ), the European Language Grid is a European platform for language technologies (eg services), data and resources. As for the development of standards and best practices for language resources, these are subject of several community groups and standardization efforts, including ISO Technical Committee 37: Terminology and other language and content resources (ISO/TC 37), developing standards for all aspects of language resources, W3C Community Group Best Practices for Multilingual Linked Open Data (BPMLOD), working on best practice recommendations for publishing language resources as Linked Data or in RDF, W3C Community Group Linked Data for Language Technology (LD4LT), working on linguistic annotations on the web and language resource metadata, W3C Community Group Ontology-Lexica (OntoLex), working on lexical resources, the Open Linguistics working group of the Open Knowledge Foundation, working on conventions for publishing and linking open language resources, developing the Linguistic Linked Open Data cloud, the Text Encoding Initiative (TEI), working on XML-based specifications for language resources and digitally edited text.