In control system theory, and various branches of engineering, a transfer function matrix, or just transfer matrix is a generalisation of the transfer functions of single-input single-output (SISO) systems to multiple-input and multiple-output (MIMO) systems. The matrix relates the outputs of the system to its inputs. It is a particularly useful construction for linear time-invariant (LTI) systems because it can be expressed in terms of the s-plane. In some systems, especially ones consisting entirely of passive components, it can be ambiguous which variables are inputs and which are outputs. In electrical engineering, a common scheme is to gather all the voltage variables on one side and all the current variables on the other regardless of which are inputs or outputs. This results in all the elements of the transfer matrix being in units of impedance. The concept of impedance (and hence impedance matrices) has been borrowed into other energy domains by analogy, especially mechanics and acoustics. Many control systems span several different energy domains. This requires transfer matrices with elements in mixed units. This is needed both to describe transducers that make connections between domains and to describe the system as a whole. If the matrix is to properly model energy flows in the system, compatible variables must be chosen to allow this. == General == A MIMO system with m outputs and n inputs is represented by a m × n matrix. Each entry in the matrix is in the form of a transfer function relating an output to an input. For example, for a three-input, two-output system, one might write, [ y 1 y 2 ] = [ g 11 g 12 g 13 g 21 g 22 g 23 ] [ u 1 u 2 u 3 ] {\displaystyle {\begin{bmatrix}y_{1}\\y_{2}\end{bmatrix}}={\begin{bmatrix}g_{11}&g_{12}&g_{13}\\g_{21}&g_{22}&g_{23}\end{bmatrix}}{\begin{bmatrix}u_{1}\\u_{2}\\u_{3}\end{bmatrix}}} where the un are the inputs, the ym are the outputs, and the gmn are the transfer functions. This may be written more succinctly in matrix operator notation as, Y = G U {\displaystyle \mathbf {Y} =\mathbf {G} \mathbf {U} } where Y is a column vector of the outputs, G is a matrix of the transfer functions, and U is a column vector of the inputs. In many cases, the system under consideration is a linear time-invariant (LTI) system. In such cases, it is convenient to express the transfer matrix in terms of the Laplace transform (in the case of continuous time variables) or the z-transform (in the case of discrete time variables) of the variables. This may be indicated by writing, for instance, Y ( s ) = G ( s ) U ( s ) {\displaystyle \mathbf {Y} (s)=\mathbf {G} (s)\mathbf {U} (s)} which indicates that the variables and matrix are in terms of s, the complex frequency variable of the s-plane arising from Laplace transforms, rather than time. The examples in this article are all assumed to be in this form, although that is not explicitly indicated for brevity. For discrete time systems s is replaced by z from the z-transform, but this makes no difference to subsequent analysis. The matrix is particularly useful when it is a proper rational matrix, that is, all its elements are proper rational functions. In this case, the state-space representation can be applied. In systems engineering, the overall system transfer matrix G (s) is decomposed into two parts: H (s) representing the system being controlled, and C(s) representing the control system. C (s) takes as its inputs the inputs of G (s) and the outputs of H (s). The outputs of C (s) form the inputs for H (s). == Electrical systems == In electrical systems, it is often the case that the distinction between input and output variables is ambiguous. They can be either, depending on circumstance and point of view. In such cases, the concept of port (a place where energy is transferred from one system to another) can be more useful than input and output. It is customary to define two variables for each port (p): the voltage across it (Vp) and the current entering it (Ip). For instance, the transfer matrix of a two-port network can be defined as follows, [ V 1 V 2 ] = [ z 11 z 12 z 21 z 22 ] [ I 1 I 2 ] {\displaystyle {\begin{bmatrix}V_{1}\\V_{2}\end{bmatrix}}={\begin{bmatrix}z_{11}&z_{12}\\z_{21}&z_{22}\\\end{bmatrix}}{\begin{bmatrix}I_{1}\\I_{2}\end{bmatrix}}} where the zmn are called the impedance parameters, or z-parameters. They are so-called because they are in units of impedance and relate port currents to a port voltage. The z-parameters are not the only way that transfer matrices are defined for two-port networks. Six basic matrices relate voltages and currents, each with advantages for particular system network topologies. However, only two of these can be extended beyond two ports to an arbitrary number of ports. These two are the z-parameters and their inverse, the admittance parameters or y-parameters. To understand the relationship between port voltages and currents and inputs and outputs, consider the simple voltage divider circuit. If we only wish to consider the output voltage (V2) resulting from applying the input voltage (V1) then the transfer function can be expressed as, [ V 2 ] = [ R 2 R 1 + R 2 ] [ V 1 ] {\displaystyle {\begin{bmatrix}V_{2}\end{bmatrix}}={\begin{bmatrix}{\dfrac {R_{2}}{R_{1}+R_{2}}}\end{bmatrix}}{\begin{bmatrix}V_{1}\end{bmatrix}}} which can be considered the trivial case of a 1×1 transfer matrix. The expression correctly predicts the output voltage if there is no current leaving port 2, but is increasingly inaccurate as the load increases. If, however, we attempt to use the circuit in reverse, driving it with a voltage at port 2 and calculate the resulting voltage at port 1 the expression gives completely the wrong result even with no load on port 1. It predicts a greater voltage at port 1 than was applied at port 2, an impossibility with a purely resistive circuit like this one. To correctly predict the behaviour of the circuit, the currents entering or leaving the ports must also be taken into account, which is what the transfer matrix does. The impedance matrix for the voltage divider circuit is, [ V 1 V 2 ] = [ R 1 + R 2 R 2 R 2 R 2 ] [ I 1 I 2 ] {\displaystyle {\begin{bmatrix}V_{1}\\V_{2}\end{bmatrix}}={\begin{bmatrix}R_{1}+R_{2}&R_{2}\\R_{2}&R_{2}\end{bmatrix}}{\begin{bmatrix}I_{1}\\I_{2}\end{bmatrix}}} which fully describes its behaviour under all input and output conditions. At microwave frequencies, none of the transfer matrices based on port voltages and currents are convenient to use in practice. Voltage is difficult to measure directly, current next to impossible, and the open circuits and short circuits required by the measurement technique cannot be achieved with any accuracy. For waveguide implementations, circuit voltage and current are entirely meaningless. Transfer matrices using different sorts of variables are used instead. These are the powers transmitted into, and reflected from a port, which are readily measured in the transmission line technology used in distributed-element circuits in the microwave band. The most well-known and widely used of these sorts of parameters is the scattering parameters, or s-parameters. == Mechanical and other systems == The concept of impedance can be extended into the mechanical and other domains through a mechanical-electrical analogy, hence the impedance parameters and other forms of 2-port network parameters can also be extended to the mechanical domain. To do this, an effort variable and a flow variable are made analogues of voltage and current, respectively. For mechanical systems under translation these variables are force and velocity respectively. Expressing the behaviour of a mechanical component as a two-port or multi-port with a transfer matrix is a useful thing to do because, like electrical circuits, the component can often be operated in reverse and its behaviour is dependent on the loads at the inputs and outputs. For instance, a gear train is often characterised simply by its gear ratio, a SISO transfer function. However, the gearbox output shaft can be driven around to turn the input shaft, requiring a MIMO analysis. In this example, the effort and flow variables are torque T and angular velocity ω, respectively. The transfer matrix in terms of z-parameters will look like, [ T 1 T 2 ] = [ z 11 z 12 z 21 z 22 ] [ ω 1 ω 2 ] {\displaystyle {\begin{bmatrix}T_{1}\\T_{2}\end{bmatrix}}={\begin{bmatrix}z_{11}&z_{12}\\z_{21}&z_{22}\end{bmatrix}}{\begin{bmatrix}\omega _{1}\\\omega _{2}\end{bmatrix}}} However, the z-parameters are not necessarily the most convenient for characterising gear trains. A gear train is the analogue of an electrical transformer and the h-parameters (hybrid parameters) better describe transformers because they directly include the turns ratios (the analogue of gear ratios). The gearbox transfer matrix in h-parameter format is, [ T 1 ω 2 ] = [ h 11 h 12 h 21 h 22 ] [ ω 1 T 2 ] {\displaystyle {\begin{bmatrix}T_{1}\\\omega _{2}\end{bm
PeduliLindungi
SatuSehat (Indonesian for "one health"), formerly PeduliLindungi (roughly "care to protect"), is a national integrated health data exchange platform, jointly developed by the Indonesian Ministry of Communication and Information Technology (Kemenkominfo), in partnership with Committee for COVID-19 Response and National Economic Recovery (KPCPEN), Ministry of Health (Kemenkes), Ministry of State-Owned Enterprises (KemenBUMN), and Telkom Indonesia. The SatuSehat platform aims to facilitate data accessibility and service efficiency for health providers and the government, and assist the public as a tool to access their own electronic medical record data. This app was the official COVID-19 contact tracing app used for digital contact tracing in Indonesia, and originally known as TraceTogether but later changed because Singapore had its app using the same name. == Implementation == On 23 August 2021, Coordinating Minister for Maritime and Investments Affairs, Luhut Binsar Panjaitan, encouraged the government to make this app a mandatory requirement before using public transportations, such as train, bus, ferry, and plane. Furthermore, citizen must have installed the app before entering shopping malls, factories, and sport venues. Every person who have received at least a dose of vaccine will receive a vaccine card and vaccination certificate which can be downloaded from the app. In December 2022, with the revocation of PPKM (Community Activities Restrictions Enforcement) starting from 1 January 2023, Ministry of Health issued a statement that the usage of the app is not a governmental mandatory requirement as it used to be. === Transition into a citizen health app === On 7 September 2022, it was announced that the app would be modified to become a citizen health app, capitalising on the reach of the app and the existing work done around the app. On 28 February 2023, the authorities announced that the app was rebranded to SATUSEHAT Mobile (lit. 'OneHealth Mobile'), with existing users needing to update the PeduliLindungi app and re-synchronise their COVID-19 related health information. The re-branded app would eventually be an all-in-one health service and records retrieval app for Indonesians. == Controversy == It was reported that the app requires continuous access to the phone's files, media, and GPS, which quickly drains the battery. Allowing location access only during use or denying it altogether will render the app unusable. This stands in stark contrast to COVID-19 apps used in other countries that only utilize Bluetooth and do not require any additional permissions. In September 2021, stored personal data of at least 1.3 million Indonesian residents were leaked online, including the vaccine certificate of President Joko Widodo. The data leak was also reported on eHAC (electronic Health Alert Card), a mandatory app used for air passengers.
Color clock
The color clock, or color timer, is a part of the video circuitry of computer graphics hardware that works with analog color television systems. The clock is timed to match the timing of the color standard it works with, typically NTSC or PAL, ensuring that the data being read from the computer memory to create the image on-screen is in sync with the display. Depending on the speed of the color clock, the product of the resolution and number of colors is defined. Slow color clocks of many early games consoles and home computers resulted in limited color palettes at the highest resolutions.
Cybersecurity in space
Cybersecurity in space involves the defense of all space assets (e.g. navigation systems, satellites, ground antennas, networks, etc.). The security of space can be affected by attacks such as disruption, corruption as well as the destruction of depended-upon assets/collected data. Government (e.g. militaries) and non-government sectors (e.g. financial industries) have started to become more reliant on numerous space-based services. Due to the criticality of these services, space security experts have identified these assets as high-value targets (HVT) that can cause detrimental consequences to all of Earth. == Scope and definitions == Space assets are broken down by three sub-sectors: the space component, the ground component, and the individual user component. The architecture of space assets is extremely complex and allows for a frequent attack vector utilized, the disruption by radio frequency (RF) cyber-attacks. In 2020, a memorandum was published by President Donald Trump, Space Policy Directive‑5 (SPD‑5). It established principles to ensure the safeguarding of all space assets. In 2023, the National Institute of Standards and Technology’s (NIST) published IR 8270, Introduction to Cybersecurity for Commercial Satellite Operations. This report established a baseline risk-management framework (RMF) to be implemented into space operations. == History == During the Cold War in the 1950s-1960s, the United States and Russia entered what was called the “Space Race”. By 1957, the Soviet Union successfully launched the first satellite into space named Sputnik. By 1961, the first key milestone was accomplished when the Soviet Union’s Yuri Gagarin became the first human to orbit Earth. This was later followed by the first American, Alan Shepard, to be launched into space; this was followed by John Glenn becoming the first American to orbit Earth in 1962. In 1969, a pinnacle milestone was reached when Apollo 11 launched into space and Neil Armstrong became the first man to walk on the moon. As space operations furthered, Commercial off-the-shelf products became increasingly popular but resulted in a rapid increase to the cyber-attack surface. Public awareness of space security did not increase until 2022, when the Viasat KA-SAT incident occurred, resulting in the disruption of a large number of modems across Europe. The attack was later accredited to Russia by the U.S. and the U.K. Policy and standards started to rapidly increase by 2020. The establishment of SPD-5 was released in 2020 followed by asset hardening instructions in 2022, and NIST’s IR 8270 in 2023. It was not until 2025 that Europe published their own findings in the Space Threat Landscape 2025 Report. This document led to the EU’s security proposals and standards. == Threats == === Radio-frequency Interference and Global Navigation Satellite Systems (GNSS) Spoofing === Space services are highly dependent on RF links for systems such as GNSS, however, a consequence of this dependency on RF is denial of service and deception. In 2017, the Black Sea maritime event occurred when numerous ships were subject to spoofing. Space services depend on RF links susceptible to jamming (denial) and spoofing (deception), including for GNSS/Positioning, Navigation, and Timing (PNT). Annotated incidents include the 2017 Black Sea maritime spoofing event affecting numerous ships, and extensive aviation GNSS spoofing patterns surveyed in various regions during 2024–2025. === Network intrusion and malware === Cyber threats can intrude and infect assets with malware. They do this by finding misconfiguration vulnerabilities, remote-management interfaces, and/or supply-chain vulnerabilities mainly in ground networks and user terminals. When KA-SAT occurred, it resulted from bulk modem disturbances. Forensic analysts later suggested malicious management controls and wiper malware as the root cause. === Supply-chain and lifecycle risks === The outsource of COTS components, external vendors, and software defined payloads allowed for vulnerabilities to emerge in the System/Product Lifecycle. In response, EU recommended the implementation of lifecycle-wide controls as mitigating factors. === Espionage, disruption, and influence === As Advanced Persistent Threats (APTs), Global Positioning System (GPS) intervention, and information warfare increased, assets like transponders became more frequent targets of attack. == Noteworthy incidents == The Viasat KA‑SAT incident of 2022, where a large number of modems in Europe were disrupted, resulted in the loss of telemetry access to a significant amount of wind turbines in Germany. The mass GNSS deception of the Black Sea in 2017 affected numerous ships when they started to convey fake central locations in Russia. Between 2024 and 2025, there was a mass, repetitive aviation GNSS spoofing that affected the aircraft of various regions. == Standards, guidelines, and best practices == SPD‑5 (U.S.) – This established risk-based engineering, verifying and ensuring positive control, and the implementation of risk mitigation controls. NIST IR 8270 – This created a RMF for COTS satellites. CISA/FBI SATCOM Advisory (AA22‑076) – Provided guidance on hardening techniques such as least-privileged, access control, encryption, etc.). ENISA Space Threat Landscape 2025 – It established the categorization of assets to organize threats, ensuring the observation of system/product lifecycle, and an RMF for COTS satellites. ECSS‑E‑ST‑80C (2024) – This established a standard for securing lifecycles in space, covering all segments (e.g. ground, launch, etc.). == Regulation and governance == As of 2025, there is no international regulations established for space assets, but the U.S., EU, and ESA institutional initiatives have published standards to address security concerns. The U.S. implemented SPD-5 and the Federal Communications Commission (FCC); the FCC addressed orbital debris. While the EU created standards to address technological mandates and support the implementation of NIS2. Lastly, the ESA created a special operations center to safeguard their satellites. International governance is still evolving, but forums have been held by the United Nations Committee on the Peaceful Uses of Outer Space. International conversations under forums such as the UN Committee on the Peaceful Uses of Outer Space (COPUOS) progressively note the cyber–space safety relationship, though formal global norms specific to space cybersecurity continue evolving. == Risk management approaches == Through RMF, mitigation controls have been implemented to reduce the risk of exploitation while increasing the security of space. Controls addressing mitigation include proper configuration, system hardening, zero-trust architectures, encryption, etc. Both the government and industries have placed an emphasis on incident response procedures to identify, contain, and remediate breaches.
Roposo
Roposo is an Indian video-sharing social media service, owned by Glance, a subsidiary of InMobi. Roposo provides a space where users can share posts related to different topics like food, comedy, music, poetry, fashion and travel. It is a platform where people express visually with homemade videos and photos. The app offers a TV-like browsing experience with user-generated content on its channels. Users can also use editing tools on the platform and upload their content. == History == Established in July 2014 under Relevant E-solutions Pvt. Ltd., Roposo is the brainchild of three IIT Delhi alumni – Mayank Bhangadia, Avinash Saxena, and Kaushal Shubhank. Under Bhangadia's leadership, the company pivoted from a fashion-based network into a short-form video platform with AI-powered moderation, and its journey was featured as a Harvard Business Publishing case study. In November 2019, Roposo was acquired by InMobi's Glance Digital Experience Pvt. Ltd.(the mobile content platform and part of the InMobi Group). When the Chinese-owned video-sharing app TikTok was banned on 30 June 2020, the app saw a huge spike in users with several TikTok users registering on Roposo. == Technology == The open platform has some features such as a TV-like browsing, different channels, a chat feature that lets buyers and sellers converse directly through the platform, and creation tools such as an option to add voice-over, music and GIF stickers for videos and photos.
Decision list
Decision lists are a representation for Boolean functions which can be easily learned from examples. Single term decision lists are more expressive than disjunctions and conjunctions; however, 1-term decision lists are less expressive than the general disjunctive normal form and the conjunctive normal form. The language specified by a k-length decision list includes as a subset the language specified by a k-depth decision tree. Learning decision lists can be used for attribute efficient learning, a type of machine learning. == Definition == A decision list (DL) of length r is of the form: if f1 then output b1 else if f2 then output b2 ... else if fr then output br where fi is the ith formula and bi is the ith boolean for i ∈ { 1... r } {\displaystyle i\in \{1...r\}} . The last if-then-else is the default case, which means formula fr is always equal to true. A k-DL is a decision list where all of formulas have at most k terms. Sometimes "decision list" is used to refer to a 1-DL, where all of the formulas are either a variable or its negation.
Real-time computer graphics
Real-time computer graphics or real-time rendering is the sub-field of computer graphics focused on producing and analyzing images in real time. The term can refer to anything from rendering an application's graphical user interface (GUI) to real-time image analysis, but is most often used in reference to interactive 3D computer graphics, typically using a graphics processing unit (GPU). One example of this concept is a video game that rapidly renders changing 3D environments to produce an illusion of motion. Computers have been capable of generating 2D images such as simple lines, images and polygons in real time since their invention. However, quickly rendering detailed 3D objects is a daunting task for traditional Von Neumann architecture-based systems. An early workaround to this problem was the use of sprites, 2D images that could imitate 3D graphics. Different techniques for rendering now exist, such as ray-tracing and rasterization. Using these techniques and advanced hardware, computers can now render images quickly enough to create the illusion of motion while simultaneously accepting user input. This means that the user can respond to rendered images in real time, producing an interactive experience. == Principles of real-time 3D computer graphics == The goal of computer graphics is to generate computer-generated images, or frames, using certain desired metrics. One such metric is the number of frames generated in a given second. Real-time computer graphics systems differ from traditional (i.e., non-real-time) rendering systems in that non-real-time graphics typically rely on ray tracing. In this process, millions or billions of rays are traced from the camera to the world for detailed rendering—this expensive operation can take hours or days to render a single frame. Real-time graphics systems must render each image in less than 1/30th of a second. Ray tracing is far too slow for these systems; instead, they employ the technique of z-buffer triangle rasterization. In this technique, every object is decomposed into individual primitives, usually triangles. Each triangle gets positioned, rotated and scaled on the screen, and rasterizer hardware (or a software emulator) generates pixels inside each triangle. These triangles are then decomposed into atomic units called fragments that are suitable for displaying on a display screen. The fragments are drawn on the screen using a color that is computed in several steps. For example, a texture can be used to "paint" a triangle based on a stored image, and then shadow mapping can alter that triangle's colors based on line-of-sight to light sources. === Video game graphics === Real-time graphics optimizes image quality subject to time and hardware constraints. GPUs and other advances increased the image quality that real-time graphics can produce. GPUs are capable of handling millions of triangles per frame, and modern DirectX/OpenGL class hardware is capable of generating complex effects, such as shadow volumes, motion blurring, and triangle generation, in real-time. The advancement of real-time graphics is evidenced in the progressive improvements between actual gameplay graphics and the pre-rendered cutscenes traditionally found in video games. Cutscenes are typically rendered in real-time—and may be interactive. Although the gap in quality between real-time graphics and traditional off-line graphics is narrowing, offline rendering remains much more accurate. === Advantages === Real-time graphics are typically employed when interactivity (e.g., player feedback) is crucial. When real-time graphics are used in films, the director has complete control of what has to be drawn on each frame, which can sometimes involve lengthy decision-making. Teams of people are typically involved in the making of these decisions. In real-time computer graphics, the user typically operates an input device to influence what is about to be drawn on the display. For example, when the user wants to move a character on the screen, the system updates the character's position before drawing the next frame. Usually, the display's response-time is far slower than the input device—this is justified by the immense difference between the (fast) response time of a human being's motion and the (slow) perspective speed of the human visual system. This difference has other effects too: because input devices must be very fast to keep up with human motion response, advancements in input devices (e.g., the current Wii remote) typically take much longer to achieve than comparable advancements in display devices. Another important factor controlling real-time computer graphics is the combination of physics and animation. These techniques largely dictate what is to be drawn on the screen—especially where to draw objects in the scene. These techniques help realistically imitate real world behavior (the temporal dimension, not the spatial dimensions), adding to the computer graphics' degree of realism. Real-time previewing with graphics software, especially when adjusting lighting effects, can increase work speed. Some parameter adjustments in fractal generating software may be made while viewing changes to the image in real time. == Rendering pipeline == The graphics rendering pipeline ("rendering pipeline" or simply "pipeline") is the foundation of real-time graphics. Its main function is to render a two-dimensional image in relation to a virtual camera, three-dimensional objects (an object that has width, length, and depth), light sources, lighting models, textures and more. === Architecture === The architecture of the real-time rendering pipeline can be divided into conceptual stages: application, geometry and rasterization. === Application stage === The application stage is responsible for generating "scenes", or 3D settings that are drawn to a 2D display. This stage is implemented in software that developers optimize for performance. This stage may perform processing such as collision detection, speed-up techniques, animation and force feedback, in addition to handling user input. Collision detection is an example of an operation that would be performed in the application stage. Collision detection uses algorithms to detect and respond to collisions between (virtual) objects. For example, the application may calculate new positions for the colliding objects and provide feedback via a force feedback device such as a vibrating game controller. The application stage also prepares graphics data for the next stage. This includes texture animation, animation of 3D models, animation via transforms, and geometry morphing. Finally, it produces primitives (points, lines, and triangles) based on scene information and feeds those primitives into the geometry stage of the pipeline. === Geometry stage === The geometry stage manipulates polygons and vertices to compute what to draw, how to draw it and where to draw it. Usually, these operations are performed by specialized hardware or GPUs. Variations across graphics hardware mean that the "geometry stage" may actually be implemented as several consecutive stages. ==== Model and view transformation ==== Before the final model is shown on the output device, the model is transformed onto multiple spaces or coordinate systems. Transformations move and manipulate objects by altering their vertices. Transformation is the general term for the four specific ways that manipulate the shape or position of a point, line or shape. ==== Lighting ==== In order to give the model a more realistic appearance, one or more light sources are usually established during transformation. However, this stage cannot be reached without first transforming the 3D scene into view space. In view space, the observer (camera) is typically placed at the origin. If using a right-handed coordinate system (which is considered standard), the observer looks in the direction of the negative z-axis with the y-axis pointing upwards and the x-axis pointing to the right. ==== Projection ==== Projection is a transformation used to represent a 3D model in a 2D space. The two main types of projection are orthographic projection (also called parallel) and perspective projection. The main characteristic of an orthographic projection is that parallel lines remain parallel after the transformation. Perspective projection utilizes the concept that if the distance between the observer and model increases, the model appears smaller than before. Essentially, perspective projection mimics human sight. ==== Clipping ==== Clipping is the process of removing primitives that are outside of the view box in order to facilitate the rasterizer stage. Once those primitives are removed, the primitives that remain will be drawn into new triangles that reach the next stage. ==== Screen mapping ==== The purpose of screen mapping is to find out the coordinates of the primitives during the clipping stage. ==== Rasterizer stage ==== The rasterizer