In statistics, the generalized canonical correlation analysis (gCCA), is a way of making sense of cross-correlation matrices between the sets of random variables when there are more than two sets. While a conventional CCA generalizes principal component analysis (PCA) to two sets of random variables, a gCCA generalizes PCA to more than two sets of random variables. The canonical variables represent those common factors that can be found by a large PCA of all of the transformed random variables after each set underwent its own PCA. == Applications == The Helmert-Wolf blocking (HWB) method of estimating linear regression parameters can find an optimal solution only if all cross-correlations between the data blocks are zero. They can always be made to vanish by introducing a new regression parameter for each common factor. The gCCA method can be used for finding those harmful common factors that create cross-correlation between the blocks. However, no optimal HWB solution exists if the random variables do not contain enough information on all of the new regression parameters.
Solomonoff's theory of inductive inference
Solomonoff's theory of inductive inference proves that, under its common sense assumptions (axioms), the best possible scientific model is the shortest algorithm that generates the empirical data under consideration. In addition to the choice of data, other assumptions are that, to avoid the post-hoc fallacy, the programming language must be chosen prior to the data and that the environment being observed is generated by an unknown algorithm. This is also called a theory of induction. Due to its basis in the dynamical (state-space model) character of Algorithmic Information Theory, it encompasses statistical as well as dynamical information criteria for model selection. It was introduced by Ray Solomonoff, based on probability theory and theoretical computer science. In essence, Solomonoff's induction derives the posterior probability of any computable theory, given a sequence of observed data. This posterior probability is derived from Bayes' rule and some universal prior, that is, a prior that assigns a positive probability to any computable theory. Solomonoff proved that this induction is incomputable (or more precisely, lower semi-computable), but noted that "this incomputability is of a very benign kind", and that it "in no way inhibits its use for practical prediction" (as it can be approximated from below more accurately with more computational resources). It is only "incomputable" in the benign sense that no scientific consensus is able to prove that the best current scientific theory is the best of all possible theories. However, Solomonoff's theory does provide an objective criterion for deciding among the current scientific theories explaining a given set of observations. Solomonoff's induction naturally formalizes Occam's razor by assigning larger prior credences to theories that require a shorter algorithmic description. == Origin == === Philosophical === The theory is based in philosophical foundations, and was founded by Ray Solomonoff around 1960. It is a mathematically formalized combination of Occam's razor and the Principle of Multiple Explanations. All computable theories which perfectly describe previous observations are used to calculate the probability of the next observation, with more weight put on the shorter computable theories. Marcus Hutter's universal artificial intelligence builds upon this to calculate the expected value of an action. === Principle === Solomonoff's induction has been argued to be the computational formalization of pure Bayesianism. To understand, recall that Bayesianism derives the posterior probability P [ T | D ] {\displaystyle \mathbb {P} [T|D]} of a theory T {\displaystyle T} given data D {\displaystyle D} by applying Bayes rule, which yields P [ T | D ] = P [ D | T ] P [ T ] P [ D | T ] P [ T ] + ∑ A ≠ T P [ D | A ] P [ A ] {\displaystyle \mathbb {P} [T|D]={\frac {\mathbb {P} [D|T]\mathbb {P} [T]}{\mathbb {P} [D|T]\mathbb {P} [T]+\sum _{A\neq T}\mathbb {P} [D|A]\mathbb {P} [A]}}} where theories A {\displaystyle A} are alternatives to theory T {\displaystyle T} . For this equation to make sense, the quantities P [ D | T ] {\displaystyle \mathbb {P} [D|T]} and P [ D | A ] {\displaystyle \mathbb {P} [D|A]} must be well-defined for all theories T {\displaystyle T} and A {\displaystyle A} . In other words, any theory must define a probability distribution over observable data D {\displaystyle D} . Solomonoff's induction essentially boils down to demanding that all such probability distributions be computable. Interestingly, the set of computable probability distributions is a subset of the set of all programs, which is countable. Similarly, the sets of observable data considered by Solomonoff were finite. Without loss of generality, we can thus consider that any observable data is a finite bit string. As a result, Solomonoff's induction can be defined by only invoking discrete probability distributions. Solomonoff's induction then allows to make probabilistic predictions of future data F {\displaystyle F} , by simply obeying the laws of probability. Namely, we have P [ F | D ] = E T [ P [ F | T , D ] ] = ∑ T P [ F | T , D ] P [ T | D ] {\displaystyle \mathbb {P} [F|D]=\mathbb {E} _{T}[\mathbb {P} [F|T,D]]=\sum _{T}\mathbb {P} [F|T,D]\mathbb {P} [T|D]} . This quantity can be interpreted as the average predictions P [ F | T , D ] {\displaystyle \mathbb {P} [F|T,D]} of all theories T {\displaystyle T} given past data D {\displaystyle D} , weighted by their posterior credences P [ T | D ] {\displaystyle \mathbb {P} [T|D]} . === Mathematical === The proof of the "razor" is based on the known mathematical properties of a probability distribution over a countable set. These properties are relevant because the infinite set of all programs is a denumerable set. The sum S of the probabilities of all programs must be exactly equal to one (as per the definition of probability) thus the probabilities must roughly decrease as we enumerate the infinite set of all programs, otherwise S will be strictly greater than one. To be more precise, for every ϵ {\displaystyle \epsilon } > 0, there is some length l such that the probability of all programs longer than l is at most ϵ {\displaystyle \epsilon } . This does not, however, preclude very long programs from having very high probability. Fundamental ingredients of the theory are the concepts of algorithmic probability and Kolmogorov complexity. The universal prior probability of any prefix p of a computable sequence x is the sum of the probabilities of all programs (for a universal computer) that compute something starting with p. Given some p and any computable but unknown probability distribution from which x is sampled, the universal prior and Bayes' theorem can be used to predict the yet unseen parts of x in optimal fashion. == Mathematical guarantees == === Solomonoff's completeness === The remarkable property of Solomonoff's induction is its completeness. In essence, the completeness theorem guarantees that the expected cumulative errors made by the predictions based on Solomonoff's induction are upper-bounded by the Kolmogorov complexity of the (stochastic) data generating process. The errors can be measured using the Kullback–Leibler divergence or the square of the difference between the induction's prediction and the probability assigned by the (stochastic) data generating process. === Solomonoff's uncomputability === Unfortunately, Solomonoff also proved that Solomonoff's induction is uncomputable. In fact, he showed that computability and completeness are mutually exclusive: any complete theory must be uncomputable. The proof of this is derived from a game between the induction and the environment. Essentially, any computable induction can be tricked by a computable environment, by choosing the computable environment that negates the computable induction's prediction. This fact can be regarded as an instance of the no free lunch theorem. == Modern applications == === Artificial intelligence === Though Solomonoff's inductive inference is not computable, several AIXI-derived algorithms approximate it in order to make it run on a modern computer. The more computing power they are given, the closer their predictions are to the predictions of inductive inference (their mathematical limit is Solomonoff's inductive inference). Another direction of inductive inference is based on E. Mark Gold's model of learning in the limit from 1967 and has developed since then more and more models of learning. The general scenario is the following: Given a class S of computable functions, is there a learner (that is, recursive functional) which for any input of the form (f(0),f(1),...,f(n)) outputs a hypothesis (an index e with respect to a previously agreed on acceptable numbering of all computable functions; the indexed function may be required consistent with the given values of f). A learner M learns a function f if almost all its hypotheses are the same index e, which generates the function f; M learns S if M learns every f in S. Basic results are that all recursively enumerable classes of functions are learnable while the class REC of all computable functions is not learnable. Many related models have been considered and also the learning of classes of recursively enumerable sets from positive data is a topic studied from Gold's pioneering paper in 1967 onwards. A far reaching extension of the Gold’s approach is developed by Schmidhuber's theory of generalized Kolmogorov complexities, which are kinds of super-recursive algorithms.
Server-Gated Cryptography
Server-Gated Cryptography (SGC), also known as International Step-Up by Netscape, is a defunct mechanism that was used to step up from 40-bit or 56-bit to 128-bit cipher suites with SSL. It was created in response to United States federal legislation on the export of strong cryptography in the 1990s. The legislation had limited encryption to weak algorithms and shorter key lengths in software exported outside of the United States of America. When the legislation added an exception for financial transactions, SGC was created as an extension to SSL with the certificates being restricted to financial organisations. In 1999, this list was expanded to include online merchants, healthcare organizations, and insurance companies. This legislation changed in January 2000, resulting in vendors no longer shipping export-grade browsers and SGC certificates becoming available without restriction. Internet Explorer supported SGC starting with patched versions of Internet Explorer 3. SGC became obsolete when Internet Explorer 5.01 SP1 and Internet Explorer 5.5 started supporting strong encryption without the need for a separate high encryption pack (except on Windows 2000, which needs its own high encryption pack that was included in Service Pack 2 and later). "Export-grade" browsers are unusable on the modern Web due to many servers disabling export cipher suites. Additionally, these browsers are incapable of using SHA-2 family signature hash algorithms like SHA-256. Certification authorities are trying to phase out the new issuance of certificates with the older SHA-1 signature hash algorithm. The continuing use of SGC facilitates the use of obsolete, insecure Web browsers with HTTPS. However, while certificates that use the SHA-1 signature hash algorithm remain available, some certificate authorities continue to issue SGC certificates (often charging a premium for them) although they are obsolete. The reason certificate authorities can charge a premium for SGC certificates is that browsers only allowed a limited number of roots to support SGC. When an SSL handshake takes place, the software (e.g. a web browser) would list the ciphers that it supports. Although the weaker exported browsers would only include weaker ciphers in its initial SSL handshake, the browser also contained stronger cryptography algorithms. There are two protocols involved to activate them. Netscape Communicator 4 used International Step-Up, which used the now obsolete insecure renegotiation to change to a stronger cipher suite. Microsoft used SGC, which sends a new Client Hello message listing the stronger cipher suites on the same connection after the certificate is determined to be SGC capable, and also supported Netscape Step-Up for compatibility (though this support in the NT 4.0 SP6 and IE 5.01 version had a bug where changing MAC algorithms during Step-Up did not work properly).
Data deduplication
In computing, data deduplication is a technique for eliminating duplicate copies of repeating data. Successful implementation of the technique can improve storage utilization, which may in turn lower capital expenditure by reducing the overall amount of storage media required to meet storage capacity needs. It can also be applied to network data transfers to reduce the number of bytes that must be sent. The deduplication process requires comparison of data 'chunks' (also known as 'byte patterns') which are unique, contiguous blocks of data. These chunks are identified and stored during a process of analysis, and compared to other chunks within existing data. Whenever a match occurs, the redundant chunk is replaced with a small reference that points to the stored chunk. Given that the same byte pattern may occur dozens, hundreds, or even thousands of times (the match frequency is dependent on the chunk size), the amount of data that must be stored or transferred can be greatly reduced. A related technique is single-instance (data) storage, which replaces multiple copies of content at the whole-file level with a single shared copy. While possible to combine this with other forms of data compression and deduplication, it is distinct from newer approaches to data deduplication (which can operate at the segment or sub-block level). Deduplication is different from data compression algorithms, such as LZ77 and LZ78. Whereas compression algorithms identify redundant data inside individual files and encodes this redundant data more efficiently, the intent of deduplication is to inspect large volumes of data and identify large sections – such as entire files or large sections of files – that are identical, and replace them with a shared copy. == Functioning principle == For example, a typical email system might contain 100 instances of the same 1 MB (megabyte) file attachment. Each time the email platform is backed up, all 100 instances of the attachment are saved, requiring 100 MB storage space. With data deduplication, only one instance of the attachment is actually stored; the subsequent instances are referenced back to the saved copy for deduplication ratio of roughly 100 to 1. Deduplication is often paired with data compression for additional storage saving: Deduplication is first used to eliminate large chunks of repetitive data, and compression is then used to efficiently encode each of the stored chunks. In computer code, deduplication is done by, for example, storing information in variables so that they don't have to be written out individually but can be changed all at once at a central referenced location. Examples are CSS classes and named references in MediaWiki. == Benefits == Storage-based data deduplication reduces the amount of storage needed for a given set of files. It is most effective in applications where many copies of very similar or even identical data are stored on a single disk. In the case of data backups, which routinely are performed to protect against data loss, most data in a given backup remain unchanged from the previous backup. Common backup systems try to exploit this by omitting (or hard linking) files that haven't changed or storing differences between files. Neither approach captures all redundancies, however. Hard-linking does not help with large files that have only changed in small ways, such as an email database; differences only find redundancies in adjacent versions of a single file (consider a section that was deleted and later added in again, or a logo image included in many documents). In-line network data deduplication is used to reduce the number of bytes that must be transferred between endpoints, which can reduce the amount of bandwidth required. See WAN optimization for more information. Virtual servers and virtual desktops benefit from deduplication because it allows nominally separate system files for each virtual machine to be coalesced into a single storage space. At the same time, if a given virtual machine customizes a file, deduplication will not change the files on the other virtual machines—something that alternatives like hard links or shared disks do not offer. Backing up or making duplicate copies of virtual environments is similarly improved. == Classification == === Post-process versus in-line deduplication === Deduplication may occur "in-line", as data is flowing, or "post-process" after it has been written. With post-process deduplication, new data is first stored on the storage device and then a process at a later time will analyze the data looking for duplication. The benefit is that there is no need to wait for the hash calculations and lookup to be completed before storing the data, thereby ensuring that store performance is not degraded. Implementations offering policy-based operation can give users the ability to defer optimization on "active" files, or to process files based on type and location. One potential drawback is that duplicate data may be unnecessarily stored for a short time, which can be problematic if the system is nearing full capacity. Alternatively, deduplication hash calculations can be done in-line: synchronized as data enters the target device. If the storage system identifies a block which it has already stored, only a reference to the existing block is stored, rather than the whole new block. The advantage of in-line deduplication over post-process deduplication is that it requires less storage and network traffic, since duplicate data is never stored or transferred. On the negative side, hash calculations may be computationally expensive, thereby reducing the storage throughput. However, certain vendors with in-line deduplication have demonstrated equipment which performs in-line deduplication at high rates. Post-process and in-line deduplication methods are often heavily debated. === Data formats === The SNIA Dictionary identifies two methods: Content-agnostic data deduplication – a data deduplication method that does not require awareness of specific application data formats. Content-aware data deduplication – a data deduplication method that leverages knowledge of specific application data formats. === Source versus target deduplication === Another way to classify data deduplication methods is according to where they occur. Deduplication occurring close to where data is created, is referred to as "source deduplication". When it occurs near where the data is stored, it is called "target deduplication". Source deduplication ensures that data on the data source is deduplicated. This generally takes place directly within a file system. The file system will periodically scan new files creating hashes and compare them to hashes of existing files. When files with same hashes are found then the file copy is removed and the new file points to the old file. Unlike hard links however, duplicated files are considered to be separate entities and if one of the duplicated files is later modified, then using a system called copy-on-write a copy of that changed file or block is created. The deduplication process is transparent to the users and backup applications. Backing up a deduplicated file system will often cause duplication to occur resulting in the backups being bigger than the source data. Source deduplication can be declared explicitly for copying operations, as no calculation is needed to know that the copied data is in need of deduplication. This leads to a new form of link on file systems, called a reference-counted link, or reflink, in some systems (e.g. Linux), or a cloned file on macOS, where one or more inodes (file information entries) are made to share some or all of their data. It is named analogously to hard links, which work at the inode level, and symbolic links, which work at the filename level.The individual entries have a copy-on-write behavior that is non-aliasing, i.e. changing one copy afterwards will not affect other copies. Microsoft's ReFS also supports this operation. Target deduplication is the process of removing duplicates when the data was not generated at that location. Example of this would be a server connected to a SAN/NAS, The SAN/NAS would be a target for the server (target deduplication). The server is not aware of any deduplication, the server is also the point of data generation. A second example would be backup. Generally this will be a backup store such as a data repository or a virtual tape library. === Deduplication methods === One of the most common forms of data deduplication implementations works by comparing chunks of data to detect duplicates. For that to happen, each chunk of data is assigned an identification, calculated by the software, typically using cryptographic hash functions. In many implementations, the assumption is made that if the identification is identical, the data is identical, even though this cannot be true in all cases due to the pigeonhole principle; other implementations do not as
Why We Post
Why We Post is a research project funded by the European Research Council and launched in 2012 by Daniel Miller with the objective of examining the global impact of new social media. The study is based on ethnographic data collected through the course of 15 months in China, India, Turkey, Italy, United Kingdom, Trinidad, Chile and Brazil. The results of this project were released on 29 February 2016. This included the first three of eleven Open Access books (available via UCL Press), a five-week e-course (MOOC) on FutureLearn in English, also available in Chinese, Portuguese, Hindi, Tamil, Italian, Turkish, and Spanish on UCLeXtend. In addition a website containing key discoveries, stories and over 100 films is available in the same 8 languages.
Graphics
Graphics (from Ancient Greek γραφικός (graphikós) 'pertaining to drawing, painting, writing, etc.') are visual images or designs on some surface, such as a wall, canvas, screen, paper, or stone, to inform, illustrate, or entertain. In contemporary usage, it includes a pictorial representation of data, as in design and manufacture, in typesetting and the graphic arts, and in educational and recreational software. Images that are generated by a computer are called computer graphics. Examples are photographs, drawings, line art, mathematical graphs, line graphs, charts, diagrams, typography, numbers, symbols, geometric designs, maps, engineering drawings, or other images. Graphics often combine text, illustration, and color. Graphic design may consist of the deliberate selection, creation, or arrangement of typography alone, as in a brochure, flyer, poster, web site, or book without any other element. The objective can be clarity or effective communication, association with other cultural elements, or merely the creation of a distinctive style. Graphics can be functional or artistic. The latter can be a recorded version, such as a photograph, or an interpretation by a scientist to highlight essential features, or an artist, in which case the distinction with imaginary graphics may become blurred. It can also be used for architecture. == History == The earliest graphics known to anthropologists studying prehistoric periods are cave paintings and markings on boulders, bone, ivory, and antlers, which were created during the Upper Palaeolithic period from 40,000 to 10,000 B.C. or earlier. Many of these were found to record astronomical, seasonal, and chronological details. Some of the earliest graphics and drawings are known to the modern world, from almost 6,000 years ago, are that of engraved stone tablets and ceramic cylinder seals, marking the beginning of the historical periods and the keeping of records for accounting and inventory purposes. Records from Egypt predate these and papyrus was used by the Egyptians as a material on which to plan the building of pyramids; they also used slabs of limestone and wood. From 600 to 250 BC, the Greeks played a major role in geometry. They used graphics to represent their mathematical theories such as the Circle Theorem and the Pythagorean theorem. In art, "graphics" is often used to distinguish work in a monotone and made up of lines, as opposed to painting. === Drawing === Drawing generally involves making marks on a surface by applying pressure from a tool or moving a tool across a surface. In which a tool is always used as if there were no tools it would be art. Graphical drawing is an instrumental guided drawing. === Printmaking === Woodblock printing, including images is first seen in China after paper was invented (about A.D. 105). In the West, the main techniques have been woodcut, engraving and etching, but there are many others. ==== Etching ==== Etching is an intaglio method of printmaking in which the image is incised into the surface of a metal plate using an acid. The acid eats the metal, leaving behind roughened areas, or, if the surface exposed to the acid is very thin, burning a line into the plate. The use of the process in printmaking is believed to have been invented by Daniel Hopfer (c. 1470–1536) of Augsburg, Germany, who decorated armour in this way. Etching is also used in the manufacturing of printed circuit boards and semiconductor devices. === Line art === Line art is a rather non-specific term sometimes used for any image that consists of distinct straight and curved lines placed against a (usually plain) background, without gradations in shade (darkness) or hue (color) to represent two-dimensional or three-dimensional objects. Line art is usually monochromatic, although lines may be of different colors. === Illustration === An illustration is a visual representation such as a drawing, painting, photograph or other work of art that stresses the subject more than form. The aim of an illustration is to elucidate or decorate a story, poem or piece of textual information (such as a newspaper article), traditionally by providing a visual representation of something described in the text. The editorial cartoon, also known as a political cartoon, is an illustration containing a political or social message. Illustrations can be used to display a wide range of subject matter and serve a variety of functions, such as: giving faces to characters in a story displaying a number of examples of an item described in an academic textbook (e.g. A Typology) visualizing step-wise sets of instructions in a technical manual communicating subtle thematic tone in a narrative linking brands to the ideas of human expression, individuality, and creativity making a reader laugh or smile for fun (to make laugh) funny === Graphs === A graph or chart is a graphic that represents tabular or numeric data. Charts are often used to make it easier to understand large quantities of data and the relationships between different parts of the data. === Diagrams === A diagram is a simplified and structured visual representation of concepts, ideas, constructions, relations, statistical data, etc., used to visualize and clarify the topic. === Symbols === A symbol, in its basic sense, is a representation of a concept or quantity; i.e., an idea, object, concept, quality, etc. In more psychological and philosophical terms, all concepts are symbolic in nature, and representations for these concepts are simply token artifacts that are allegorical to (but do not directly codify) a symbolic meaning, or symbolism. === Maps === A map is a simplified depiction of a space, a navigational aid which highlights relations between objects within that space. Usually, a map is a two-dimensional, geometrically accurate representation of a three-dimensional space. One of the first 'modern' maps was made by Waldseemüller. === Photography === One difference between photography and other forms of graphics is that a photographer, in principle, just records a single moment in reality, with seemingly no interpretation. However, a photographer can choose the field of view and angle, and may also use other techniques, such as various lenses to choose the view or filters to change the colors. In recent times, digital photography has opened the way to an infinite number of fast, but strong, manipulations. Even in the early days of photography, there was controversy over photographs of enacted scenes that were presented as 'real life' (especially in war photography, where it can be very difficult to record the original events). Shifting the viewer's eyes ever so slightly with simple pinpricks in the negative could have a dramatic effect. The choice of the field of view can have a strong effect, effectively 'censoring out' other parts of the scene, accomplished by cropping them out or simply not including them in the photograph. This even touches on the philosophical question of what reality is. The human brain processes information based on previous experience, making us see what we want to see or what we were taught to see. Photography does the same, although the photographer interprets the scene for their viewer. === Engineering drawings === An engineering drawing is a type of drawing and is technical in nature, used to fully and clearly define requirements for engineered items. It is usually created in accordance with standardized conventions for layout, nomenclature, interpretation, appearance (such as typefaces and line styles), size, etc. === Computer graphics === There are two types of computer graphics: raster graphics, where each pixel is separately defined (as in a digital photograph), and vector graphics, where mathematical formulas are used to draw lines and shapes, which are then interpreted at the viewer's end to produce the graphic. Using vectors results in infinitely sharp graphics and often smaller files, but, when complex, like vectors take time to render and may have larger file sizes than a raster equivalent. In 1950, the first computer-driven display was attached to MIT's Whirlwind I computer to generate simple pictures. This was followed by MIT's TX-0 and TX-2, interactive computing which increased interest in computer graphics during the late 1950s. In 1962, Ivan Sutherland invented Sketchpad, an innovative program that influenced alternative forms of interaction with computers. In the mid-1960s, large computer graphics research projects were begun at MIT, General Motors, Bell Labs, and Lockheed Corporation. Douglas T. Ross of MIT developed an advanced compiler language for graphics programming. S.A.Coons, also at MIT, and J. C. Ferguson at Boeing, began work in sculptured surfaces. GM developed their DAC-1 system, and other companies, such as Douglas, Lockheed, and McDonnell, also made significant developments. In 1968, ray tracing was first described by Arthur Appel of the IBM Research Center, Yorktown Heights, N
Social media background check
A social media background check is an investigative technique that involves scrutinizing the social media profiles and activities of individuals, primarily for pre-employment screening and other official verifications. These checks are performed to review people's online behavioral history on social media websites such as Facebook, Twitter, and LinkedIn. Social media background checks have become a common part of recruitment processes, among other verification procedures. == History == In the early 21st century, with the rapid expansion of social media platforms such as Facebook, Twitter, and LinkedIn, employers began to use these channels to gather additional information about prospective employees. Initially, social media background checks were an informal aspect of recruitment, but they have gradually gained formal recognition as a crucial element in candidate screening. Proponents of social media background checks argue that such reviews provide insight into a candidate's professional interests and networks, though the reliability of such assessments remains contested among researchers. == Rise in society == The practice of social media background checks has seen a significant surge in the last decade. This rise can be attributed to the exponential increase in social media users and the growing awareness among organizations regarding the importance of hiring individuals who align with their values and culture. Various platforms provide services explicitly designed to conduct social media background checks efficiently, simplifying the process for businesses. Companies providing social media background check services, such as Ferretly and Certn, have received venture capital funding, reflecting investor interest in the sector. The incorporation of artificial intelligence into conducting AI-powered social media background checks also illustrates its continued popularity and that businesses are looking to ramp up and even automate their use. High-profile cases in which individuals faced employment or admission consequences for past social media posts have raised awareness of social media background checking practices. For example, director James Gunn faced termination from Marvel Studios in 2018 over past offensive tweets, though he was later rehired. Additionally, multiple college admissions officers have acknowledged reviewing applicants' social media profiles, though such practices vary by institution. == Evolution of ethical considerations == Social media background checks are not without controversy, raising significant ethical considerations that have evolved in recent years. Privacy advocates argue that social media background checks raise concerns about data use and discrimination, particularly given the use of personal information that may not reflect job-relevant behavior. Legal scholars debate whether reviewing publicly posted information constitutes a privacy violation under U.S. law. Researchers and critics note that social media profiles often present curated representations of users' lives and may not reflect workplace behavior or professional competence. Moreover, the accuracy of social media background checks has been called into question, with critics pointing out that these checks may not always yield reliable or comprehensive results. Critics also warn about potential misuse of information obtained from social media, including cyberbullying and harassment. A 2023 study by found that approximately 90% of employers incorporate social media into hiring processes, with over half of those surveyed reporting they had rejected candidates based on social media content. This informal approach operates largely outside federal compliance frameworks. Critics argue that without regulation, candidates lack dispute mechanisms available under regulatory frameworks like the Fair Credit Reporting Act (FCRA), which requires compliance when background checks formally influence employment decisions. In a hiring environment where the practice is already performed often on an individual basis, the introduction of systematic, regulated screening practices that meet federal compliance standards can present a better, fairer alternative for both employers and candidates. == Business considerations == From a business perspective, social media background checks can be a valuable tool in protecting an organization's reputation and maintaining a safe and respectful workplace environment. A well-conducted social media background check can identify potential red flags, helping to prevent instances of workplace harassment or other negative behaviors. However, businesses also face potential legal repercussions if social media background checks are conducted improperly, such as non-compliance with the Fair Credit Reporting Act (FCRA) in the United States. Critics argue that over-reliance on social media data may exclude qualified candidates whose professional competence is not reflected in their online presence. The proliferation of social media screening services has prompted legal and industry experts to emphasize the importance of compliance with the Fair Credit Reporting Act and relevant state privacy laws when conducting such checks.