The Stanhope Demonstrator was the first machine to solve problems in logic. It was designed by Charles Stanhope, 3rd Earl Stanhope to demonstrate consequences in logic symbolically. The first model was constructed in 1775. It consisted of two slides coloured red and gray mounted in a square brass frame. This could be used to demonstrate the solution to a syllogistic type of problem in which objects might have two different properties and the question was how many would have both properties. Scales marked zero to ten were used to set the numbers or proportions of objects with the two properties. This form of inference anticipated the numerically definite syllogism which Augustus De Morgan laid out in his book, Formal Logic, in 1847. == Construction == The device was a brass plate about four inches square which was mounted on a piece of mahogany which was three-quarters of an inch thick. There was an opening with a depression in the wood about one and a half inches square and half an inch deep. This opening was called the holon, meaning "whole", and represented the full set of objects under consideration. A slide of red translucent glass could be inserted from the right across the holon. A slide of gray wood could be slid under the red slide. When the device was used for the "Rule for the Logic of Certainty", the gray slider was inserted from the left. When it was used for the "Rule for the Logic of Probability", the gray slider was inserted from above. The red and the gray sliders represented the two affirmative propositions which were being combined. Stanhope called these ho and los. At least four of the devices with this square style were built. In 1879, Robert Harley wrote that he had one which he had been given by Stanhope's great-grandson, Arthur, who had kept one. The other two were owned by Henry Prevost Babbage – the son of Charles Babbage, who continued his work on the Analytical Engine. One of the devices was donated to the Science Museum, London by the last Earl in 1953. Other styles, such as circular models, were constructed, but these were less convenient.
Camera interface
The Camera Interface block or CAMIF is the hardware block that interfaces with different image sensor interfaces and provides a standard output that can be used for subsequent image processing. A typical Camera Interface would support at least a parallel interface although these days many camera interfaces are beginning to support the Mobile Industry Processor Interface (MIPI) Camera Serial Interface (CSI) interface. == Electrical connections == The camera interface's parallel interface consists of the following lines: 8 to 12 bits parallel data line These are parallel data lines that carry pixel data. The data transmitted on these lines change with every Pixel Clock (PCLK). Horizontal Sync (HSYNC) This is a special signal that goes from the camera sensor or ISP to the camera interface. An HSYNC indicates that one line of the frame is transmitted. Vertical Sync (VSYNC) This signal is transmitted after the entire frame is transferred. This signal is often a way to indicate that one entire frame is transmitted. Pixel Clock (PCLK) This is the pixel clock and it would change on every pixel. NOTE: The above lines are all treated as input lines to the Camera Interface hardware.
EJB QL
EJB QL or EJB-QL is a portable database query language for Enterprise Java Beans. It was used in Java EE applications. Compared to SQL, however, it is less complex but less powerful as well. == History == The language has been inspired, especially EJB3-QL, by the native Hibernate Query Language. In EJB3 It has been mostly replaced by the Java Persistence Query Language. == Differences == EJB QL is a database query language similar to SQL. The used queries are somewhat different from relational SQL, as it uses a so-called "abstract schema" of the enterprise beans instead of the relational model. In other words, EJB QL queries do not use tables and their components, but enterprise beans, their persistent state, and their relationships. The result of an SQL query is a set of rows with a fixed number of columns. The result of an EJB QL query is either a single object, a collection of entity objects of a given type, or a collection of values retrieved from CMP fields. One has to understand the data model of enterprise beans in order to write effective queries.
OpenSMILE
openSMILE is source-available software for automatic extraction of features from audio signals and for classification of speech and music signals. "SMILE" stands for "Speech & Music Interpretation by Large-space Extraction". The software is mainly applied in the area of automatic emotion recognition and is widely used in the affective computing research community. The openSMILE project exists since 2008 and is maintained by the German company audEERING GmbH since 2013. openSMILE is provided free of charge for research purposes and personal use under a source-available license. For commercial use of the tool, the company audEERING offers custom license options. == Application Areas == openSMILE is used for academic research as well as for commercial applications in order to automatically analyze speech and music signals in real-time. In contrast to automatic speech recognition which extracts the spoken content out of a speech signal, openSMILE is capable of recognizing the characteristics of a given speech or music segment. Examples for such characteristics encoded in human speech are a speaker's emotion, age, gender, and personality, as well as speaker states like depression, intoxication, or vocal pathological disorders. The software further includes music classification technology for automatic music mood detection and recognition of chorus segments, key, chords, tempo, meter, dance-style, and genre. The openSMILE toolkit serves as benchmark in manifold research competitions such as Interspeech ComParE, AVEC, MediaEval, and EmotiW. == History == The openSMILE project was started in 2008 by Florian Eyben, Martin Wöllmer, and Björn Schuller at the Technical University of Munich within the European Union research project SEMAINE. The goal of the SEMAINE project was to develop a virtual agent with emotional and social intelligence. In this system, openSMILE was applied for real-time analysis of speech and emotion. The final SEMAINE software release is based on openSMILE version 1.0.1. In 2009, the emotion recognition toolkit (openEAR) was published based on openSMILE. "EAR" stands for "Emotion and Affect Recognition". In 2010, openSMILE version 1.0.1 was published and was introduced and awarded at the ACM Multimedia Open-Source Software Challenge. Between 2011 and 2013, the technology of openSMILE was extended and improved by Florian Eyben and Felix Weninger in the context of their doctoral thesis at the Technical University of Munich. The software was also applied for the project ASC-Inclusion, which was funded by the European Union. For this project, the software was extended by Erik Marchi in order to teach emotional expression to autistic children, based on automatic emotion recognition and visualization. In 2013, the company audEERING acquired the rights to the code-base from the Technical University of Munich and version 2.0 was published under a source-available research license. Until 2016, openSMILE was downloaded more than 50,000 times worldwide and has established itself as a standard toolkit for emotion recognition. == Awards == openSMILE was awarded in 2010 in the context of the ACM Multimedia Open Source Competition. The software tool is applied in numerous scientific publications on automatic emotion recognition. openSMILE and its extension openEAR have been cited in more than 1000 scientific publications until today.
Data janitor
A data janitor is a person who works to take big data and condense it into useful amounts of information. Also known as a "data wrangler", a data janitor sifts through data for companies in the information technology industry. A multitude of start-ups rely on large amounts of data, so a data janitor works to help these businesses with this basic, but difficult process of interpreting data. While it is a commonly held belief that data janitor work is fully automated, many data scientists are employed primarily as data janitors. The information technology industry has been increasingly turning towards new sources of data gathered on consumers, so data janitors have become more commonplace in recent years.
Are You Dead?
Are You Dead? (Chinese: 死了么; pinyin: Sǐleme), also known by its English name Demumu, is a Chinese application designed for young people living alone. It requires setting up one emergency contact and sends automatic notifications if the user has not checked in via the app for consecutive days. The app was released on the App Store on 10 June 2025. In early January 2026, the application gained popularity due to its name and the issue of safety for people living alone, and ranked high on the list of paid applications in the Chinese region of the Apple App Store before being removed. The app's rise in popularity sparked discussions about taboos about death in China. == History == Are You Dead? was founded and operated independently by three people born in the 1990s, and developed in a way that involved remote collaboration in their spare time. According to the New Yellow River report, Guo, the product manager, said that the application was designed for young people and that the inspiration came from the discussion of netizens on social platforms about "an app that everyone must have and will definitely download" that he observed two or three years ago. The name was also "not their original creation". After realizing its potential demand and social significance, the team successfully registered the name and completed the product development in about a month. Regarding the development entity, the New Yellow River cited information from the Apple App Store that the application was developed by Yuejing (Zhengzhou) Technology Service Co., Ltd. According to Tianyancha information, the company was established in March 2025 with a registered capital of 100,000 yuan. === Rise in popularity === The app has been generating buzz on social media since 9 January 2026, due to its name and the topic of safety for people living alone. Around 10 January, it topped the Apple paid app chart. As of 10:00 a.m. on January 11, it ranked first in the App Store paid app chart. It also ranked highly in the utility app chart; it ranked first or second in the paid utility app charts in the United States, Singapore and Hong Kong, and first or fourth in Australia and Spain. The app was subsequently removed from the Apple App Store in China. In terms of functionality and usage, First Financial praised the product for its "simple interface and single function," but pointed out that the interface lacks a display of consecutive check-in days, and there is also the possibility that users may forget to check in, leading to the mistaken issuance of reminders. In addition, since the application mainly relies on email reminders and lacks SMS or telephone notifications, it does not conform to Chinese social habits; the untimely notifications also make the application more like a "death notification" tool, losing its early warning significance for emergency rescue. Hu Xijin, former editor-in-chief of the Global Times, commented on the application on Weibo that it is "really good and can help many lonely elderly people." The Beijing News Quick Review pointed out that the role of technical tools is limited and needs to be connected with real support such as community patrols and liaison mechanisms. Due to the price increase, there have also been questions about the motivation for the price increase. The app's rise in popularity sparked discussions about taboos about death in China. Regarding the popularity of the application, both Southern Metropolis Daily and The Beijing News commented that it reflects the public issue of the risks of living alone and reflects the general anxiety of the living alone group about dying alone. Shangguan News further pointed out that although such technology products provide a certain "low-cost sense of security", their "cold notifications" may not only cause false alarms, but also highlight the embarrassing reality that "there is no one to fill in the emergency contact". It also emphasized that algorithms or applications cannot bring true happiness and called on society to reconstruct a support network full of humanistic care while relying on technology. The name of the application has also sparked controversy. Most netizens believe that the name "Are You Dead?" is unlucky and makes it awkward to share the application. They suggest changing it to a milder name such as "Are You Alive?". Hu Xijin also said that the name change could "give the elderly who use it more psychological comfort" and "believe that the application will become more popular after the name change". Some people also believe that this straightforward name just points out the real dilemma faced by people living alone and has a special meaning. BBC News commented that the name "Are You Dead" is playing a word game with Ele.me (Chinese: 饿了么; pinyin: Èleme) and the pronunciation is also similar. Legal professionals believe that its name is highly similar to Ele.me and may cause confusion. They also raised the possibility of trademark infringement and unfair competition. However, the developers said that the application is developed for young people and death is not a sensitive topic. They will "consider launching a new application that is more suitable for middle-aged and elderly people". They have not yet received any name change requests from relevant departments. On the evening of 13 January 2026, the Are You Dead? team announced that it would change its name to the English brand name Demumu in the upcoming new version. On 11 January, the development team also issued a statement through its official Weibo account, stating that it would study the renaming suggestion and plan to enrich the SMS reminder function, consider adding the message function and explore the direction of age-friendly products; it also stated that it would launch an 8 yuan paid plan to cover the costs of SMS, servers, etc., and welcomed investors to discuss cooperation. In terms of financing and valuation, it plans to sell 10% of the company's shares for 1 million yuan and proposed a valuation of 10 million yuan. On the evening of January 15, the application was removed from the app store in mainland China. == Functions == The application does not require users to enter phone numbers or other information to register. After filling in their name and setting an emergency contact, users can click the sign-in button every day. If they fail to sign in for two consecutive days, the system will send an email reminder to the emergency contact the next day. In addition, users can also bind a smart bracelet to monitor physiological signs, pre-designate a hearse driver and funeral music, and trigger the "one-click body collection" function when no pulse is detected. The application was initially available for free download, but a one yuan paid download option was introduced at the end of 2025. In January 2026, the application team issued a statement saying that an 8 yuan paid option would be launched based on the costs of SMS, servers, etc.
Sieve of Pritchard
In mathematics, the sieve of Pritchard is an algorithm for finding all prime numbers up to a specified bound. Like the ancient sieve of Eratosthenes, it has a simple conceptual basis in number theory. It is especially suited to quick hand computation for small bounds. Whereas the sieve of Eratosthenes marks off each non-prime for each of its prime factors, the sieve of Pritchard avoids considering almost all non-prime numbers by building progressively larger wheels, which represent the pattern of numbers not divisible by any of the primes processed thus far. It thereby achieves a better asymptotic complexity, and was the first sieve with a running time sublinear in the specified bound. Its asymptotic running-time has not been improved on, and it deletes fewer composites than any other known sieve. It was created in 1979 by Paul Pritchard. Since Pritchard has created a number of other sieve algorithms for finding prime numbers, the sieve of Pritchard is sometimes singled out by being called the wheel sieve (by Pritchard himself) or the dynamic wheel sieve. == Overview == A prime number is a natural number that has no natural number divisors other than the number 1 and itself. To find all the prime numbers less than or equal to a given integer N, a sieve algorithm examines a set of candidates in the range 2, 3, …, N, and eliminates those that are not prime, leaving the primes at the end. The sieve of Eratosthenes examines all of the range, first removing all multiples of the first prime 2, then of the next prime 3, and so on. The sieve of Pritchard instead examines a subset of the range consisting of numbers that occur on successive wheels, which represent the pattern of numbers left after each successive prime is processed by the sieve of Eratosthenes. For i > 0, the ith wheel Wi represents this pattern. It is the set of numbers between 1 and the product Pi = p1 · p2 ⋯ pi of the first i prime numbers that are not divisible by any of these prime numbers (and is said to have an associated length Pi). This is because adding Pi to a number does not change whether it is divisible by one of the first i prime numbers, since the remainder on division by any one of these primes is unchanged. So W1 = {1} with length P1 = 2 represents the pattern of odd numbers; W2 = {1,5} with length P2 = 6 represents the pattern of numbers not divisible by 2 or 3; etc. Wheels are so-called because Wi can be usefully visualized as a circle of circumference Pi with its members marked at their corresponding distances from an origin. Then rolling the wheel along the number line marks points corresponding to successive numbers not divisible by one of the first i prime numbers. The animation shows W2 being rolled up to 30. It is useful to define Wi → n for n > 0 to be the result of rolling Wi up to n. Then the animation generates W2 → 30 = {1,5,7,11,13,17,19,23,25,29}. Note that up to 52 − 1 = 24, this consists only of 1 and the primes between 5 and 25. The sieve of Pritchard is derived from the observation that this holds generally: for all i > 0, the values in Wi → (p2i+1 − 1) are 1 and the primes between pi+1 and p2i+1. It even holds for i = 0, where the wheel has length 1 and contains just 1 (representing all the natural numbers). So the sieve of Pritchard starts with the trivial wheel W0 and builds successive wheels until the square of the wheel's first member after 1 is at least N. Wheels grow very quickly, but only their values up to N are needed and generated. It remains to find a method for generating the next wheel. Note in the animation that W3 = {1,5,7,11,13,17,19,23,25,29} − {5 · 1 , 5 · 5} can be obtained by rolling W2 up to 30 and then removing 5 times each member of W2.This also holds generally: for all i ≥ 0, Wi+1 = (Wi → Pi+1) − {pi+1 · w | w ∈ Wi}. Rolling Wi past Pi just adds values to Wi, so the current wheel is first extended by getting each successive member starting with w = 1, adding Pi to it, and inserting the result in the set. Then the multiples of pi+1 are deleted. Care must be taken to avoid a number being deleted that itself needs to be multiplied by pi+1. The sieve of Pritchard as originally presented does so by first skipping past successive members until finding the maximum one needed, and then doing the deletions in reverse order by working back through the set. This is the method used in the first animation above. A simpler approach is just to gather the multiples of pi+1 in a list, and then delete them. Another approach is given by Gries and Misra. If the main loop terminates with a wheel whose length is less than N, it is extended up to N to generate the remaining primes. The algorithm, for finding all primes up to N, is therefore as follows: Start with a set W = {1} and length = 1 representing wheel 0, and prime p = 2. As long as p2 ≤ N, do the following: if length < N, then extend W by repeatedly getting successive members w of W starting with 1 and inserting length + w into W as long as it does not exceed p · length or N; increase length to the minimum of p · length and N. repeatedly delete p times each member of W by first finding the largest ≤ length and then working backwards. note the prime p, then set p to the next member of W after 1 (or 3 if p was 2). if length < N, then extend W to N by repeatedly getting successive members w of W starting with 1 and inserting length + w into W as long as it does not exceed N; On termination, the rest of the primes up to N are the members of W after 1. === Example === To find all the prime numbers less than or equal to 150, proceed as follows. Start with wheel 0 with length 1, representing all natural numbers 1, 2, 3...: 1 The first number after 1 for wheel 0 (when rolled) is 2; note it as a prime. Now form wheel 1 with length 2 × 1 = 2 by first extending wheel 0 up to 2 and then deleting 2 times each number in wheel 0, to get: 1 2 The first number after 1 for wheel 1 (when rolled) is 3; note it as a prime. Now form wheel 2 with length 3 × 2 = 6 by first extending wheel 1 up to 6 and then deleting 3 times each number in wheel 1, to get 1 2 3 5 The first number after 1 for wheel 2 is 5; note it as a prime. Now form wheel 3 with length 5 × 6 = 30 by first extending wheel 2 up to 30 and then deleting 5 times each number in wheel 2 (in reverse order), to get 1 2 3 5 7 11 13 17 19 23 25 29 The first number after 1 for wheel 3 is 7; note it as a prime. Now wheel 4 has length 7 × 30 = 210, so we only extend wheel 3 up to our limit 150. (No further extending will be done now that the limit has been reached.) We then delete 7 times each number in wheel 3 until we exceed our limit 150, to get the elements in wheel 4 up to 150: 1 2 3 5 7 11 13 17 19 23 25 29 31 37 41 43 47 49 53 59 61 67 71 73 77 79 83 89 91 97 101 103 107 109 113 119 121 127 131 133 137 139 143 149 The first number after 1 for this partial wheel 4 is 11; note it as a prime. Since we have finished with rolling, we delete 11 times each number in the partial wheel 4 until we exceed our limit 150, to get the elements in wheel 5 up to 150: 1 2 3 5 7 11 13 17 19 23 25 29 31 37 41 43 47 49 53 59 61 67 71 73 77 79 83 89 91 97 101 103 107 109 113 119 121 127 131 133 137 139 143 149 The first number after 1 for this partial wheel 5 is 13. Since 13 squared is at least our limit 150, we stop. The remaining numbers (other than 1) are the rest of the primes up to our limit 150. Just 8 composite numbers are removed, once each. The rest of the numbers considered (other than 1) are prime. In comparison, the natural version of Eratosthenes sieve (stopping at the same point) removes composite numbers 184 times. == Pseudocode == The sieve of Pritchard can be expressed in pseudocode, as follows: algorithm Sieve of Pritchard is input: an integer N >= 2. output: the set of prime numbers in {1,2,...,N}. let W and Pr be sets of integer values, and all other variables integer values. k, W, length, p, Pr := 1, {1}, 2, 3, {2}; {invariant: p = pk+1 and W = Wk ∩ {\displaystyle \cap } {1,2,...,N} and length = minimum of Pk,N and Pr = the primes up to pk} while p2 <= N do if (length < N) then Extend W,length to minimum of plength,N; Delete multiples of p from W; Insert p into Pr; k, p := k+1, next(W, 1) if (length < N) then Extend W,length to N; return Pr ∪ {\displaystyle \cup } W - {1}; where next(W, w) is the next value in the ordered set W after w. procedure Extend W,length to n is {in: W = Wk and length = Pk and n > length} {out: W = Wk → {\displaystyle \rightarrow } n and length = n} integer w, x; w, x := 1, length+1; while x <= n do Insert x into W; w := next(W,w); x := length + w; length := n; procedure Delete multiples of p from W,length is integer w; w := p; while pw <= length do w := next(W,w); while w > 1 do w := prev(W,w); Remove pw from W; where prev(W, w) is the previous value in the ordered set W before w. The algorithm can be initialized with W0 instead of W1 at the minor complication of making next(W, 1) a special case when k = 0. This a