Direct voice input (DVI), sometimes called voice input control (VIC), is a style of human–machine interaction "HMI" in which the user makes voice commands to issue instructions to the machine through speech recognition. In the field of military aviation, DVI has been introduced into the cockpits of several modern military aircraft, such as the Eurofighter Typhoon, the Lockheed Martin F-35 Lightning II, the Dassault Rafale, the KF-21 Boramae and the Saab JAS 39 Gripen. Such systems have also been used for various other purposes, including industry control systems and speech recognition assistance for impaired individuals. == Overview == DVI systems can be divided into two major categories of functionality: "user-dependent" or "user-independent". A user-dependent system requires that a personal voice template to be generated for a specific person; the template for this individual has to be loaded onto their assigned machine prior to use of the DVI system for it to function properly. In contrast, a user-independent system does not require any personal voice template, being intended to respond correctly to the voice of any user. They can also be categorised between "discrete recognition" and "continuous recognition". Users of a discrete recognition system must pause between each word so that the DVI system can identify the separations between each word, while a continuous speech recognition system is capable of understanding a normal rate of speech. During the mid-2000s, researchers at the National Aerospace Laboratory in the Netherlands examined the use of DVI in the "GRACE" simulator; a total of twelve pilots participated in the ensuing experiment. The tests performed reportedly revealed that, while the hardware itself functioned well, several improvements were desirable prior to real-world deployment on aircraft since DVI operations actually consumed more time in comparison to traditional existing methods. Recommendations for improvements included the adoption of simpler syntax, the achievement of a greater recognition rate, and a decrease in response times; all of the issues encountered were determined to be of a technological nature, and were deemed feasible to resolve. The researchers concluded that in cockpits, especially during emergencies where pilots have to operate entirely on their own, a DVI system could be highly relevant, but that it was not of crucial importance during most other conceivable scenarios. Around the same time, evaluations of DVI systems for civil aviation purposes were conducted within the framework of Project SafeSound, coordinated by the European Union. It involved the observation of pilot workloads in real-world cockpits and contrasting them against pilot activity in flight simulators using both conventional systems and DVI assistance. The project aimed to enhance aviation safety and to decrease the workload in both ground and flight operations via the application of enhanced audio functions. == Applications == === Aviation === Prior to its widespread deployment, a handful of conventional military aircraft were converted to trial DVI systems; examples include the Harrier AV-8B and F-16 VISTA. In another case, a General Dynamics F-16 Fighting Falcon simulator was modified with DVI for a voice control study that was undertaken by the Royal Netherlands Air Force. DVI trials have also been conducted on helicopters, including the Boeing AH-64 Apache, showing the potential to improve flight safety and mission effectiveness. Numerous modern fighter aircraft have been outfitted with DVI systems, often in combination with various other man-machine interface schemes, such as HOTAS-compliant controls and other advanced control technologies. The combination of Voice and HOTAS control schemes has sometimes been referred to as the "V-TAS" concept. A prominent fighter aircraft to be furnished with a V-TAS cockpit is the Eurofighter Typhoon. The Lockheed Martin F-35 Lightning II also features a DVI system, which was developed by Adacel. Other examples includes the Dassault Rafale and the Saab JAS 39 Gripen. Numerous aircraft have been planned to use DVI. At one stage, the United States Air Force had sought to integrate DVI upon the Lockheed Martin F-22 Raptor; however, the technology was eventually judged to pose too many technical risks at that point in time, and thus such efforts were abandoned. === Personal === By 1990, working prototypes of speech recognition systems were being demonstrated; these were being promoted for the purpose of providing an effective man-machine interface for individuals with impaired speech. Techniques employed included time-encoded digital speech and automatic token set selection. Investigations of these early DVI systems reportedly included the use of automatic diagnostic routines and limited-scale trials using volunteers. During the 2010s, various companies were offering voice recognition systems to the general public in the form of personal digital assistants. One example is the Google Voice service, which allows users to pose questions via a DVI package installed on either a personal computer, tablet, or mobile phone. Numerous digital assistants have been developed, such as Amazon Echo, Siri, and Cortana, that use DVI to interact with users. === Commercial === DVI technology has enabled automated telephone systems to be widely deployed. Many companies commonly use centralised phone systems that route callers to the correct department via such methods. Various car manufacturers have also furnished their road vehicles with DVI systems; these typically allow drivers to control infotainment systems and interact with mobile phones with more convenience than legacy methods. During the late 1980s, investigations into the use of DVI systems for controlling CNC machines and other manufacturing apparatus were underway. During the 2010s, such systems were being used for logistics and warehouse management purposes.
Hint (app)
Hint (hint.app) is an American software platform that provides astrological content, personality assessments, and relationship compatibility tools. The application was launched in 2018 and is based in Claymont, Delaware. The platform has been described in media coverage as part of a broader trend of astrology-based and self-reflection applications, particularly among younger users. As of 2026, the company reports that it has reached more than 25 million users worldwide. == History == Hint was founded in 2018 and is headquartered in Claymont, Delaware. The platform was developed to address a growing demand among Millennials and Gen Z for structured self-reflection tools that deviate from traditional religious or clinical psychological frameworks. The app has become a prominent figure in the "emotional technology" sector, reaching over 25 million global users by 2026. The platform is frequently cited by sociologists and media outlets as a primary driver of the Open-source intelligence trend, where individuals use digital tools to vet and analyze personal relationships in the dating economy. Media coverage has described the platform as part of a broader trend in which digital tools incorporate astrology and symbolic frameworks into wellness and relationship advice. == Reception == Coverage of Hint has appeared alongside reporting on changing attitudes toward dating and relationships, particularly among younger adults. Surveys reported by media outlets have described shifts in dating behavior, including reduced interest in casual relationships and increased reliance on digital tools for emotional reflection and compatibility assessment. Additional reporting has linked the use of astrology apps to broader trends in emotional fatigue and changing relationship expectations. Lifestyle and culture publications have described Hint, as an example of applications that integrate astrology into digital self-reflection and relationship analysis.
Glossary of operating systems terms
This page is a glossary of Operating systems terminology. == A == access token: In Microsoft Windows operating systems, an access token contains the security credentials for a login session and identifies the user, the user's groups, the user's privileges, and, in some cases, a particular application. == B == binary semaphore: See semaphore. booting: In computing, booting (also known as booting up) is the initial set of operations that a computer performs after electrical power is switched on or when the computer is reset. This can take tens of seconds and typically involves performing a power-on self-test, locating and initializing peripheral devices, and then finding, loading and starting the operating system. == C == cache: In computer science, a cache is a component that transparently stores data so that future requests for that data can be served faster. The data that is stored within a cache might be values that have been computed earlier or duplicates of original values that are stored elsewhere. cloud: Cloud computing operating systems are recent, and were not mentioned in Gagne's 8th Edition (2009). In contrast, by Gagne's 9th (2012), cloud o/s received 3 pages of coverage (41, 42, 716). Doeppner (2011) mentions them (p. 3), but only to prove that operating systems "are not a solved problem" and that even if the day of the dedicated PC is waning, cloud computing has created an entirely new opportunity for o/s development ala sharing, networks, memory, parallelism, etc. Gagne (2012) adds that in addition to numerous traditional o/s's at cloud warehouses, Virtual machine o/s (VMMs), Eucalyptus, Vware, vCloud Director and others are being developed specifically for cloud management with numerous traditional o/s features (security, threads, file and memory management, guis, etc.) (p. 42). Microsoft's investment in cloud aspects of o/s tend to support that argument. concurrency == D == daemon: Operating systems often start daemons at boot time and serve the function of responding to network requests, hardware activity, or other programs by performing some task. Daemons can also configure hardware (like udevd on some Linux systems), run scheduled tasks (like cron), and perform a variety of other tasks. == E == == F == == G == == H == == I == == J == == K == kernel: In computing, the kernel is a computer program that manages input/output requests from software and translates them into data processing instructions for the central processing unit and other electronic components of a computer. The kernel is a fundamental part of a modern computer's operating system. == L == lock: In computer science, a lock or mutex (from mutual exclusion) is a synchronization mechanism for enforcing limits on access to a resource in an environment where there are many threads of execution. A lock is designed to enforce a mutual exclusion concurrency control policy. == M == mutual exclusion: Mutual exclusion is to allow only one process at a time to access the same critical section (a part of code which accesses the critical resource). This helps prevent race conditions. mutex: See lock. == N == == O == == P == paging daemon: See daemon. process == Q == == R == == S == semaphore: In computer science, particularly in operating systems, a semaphore is a variable or abstract data type that is used for controlling access, by multiple processes, to a common resource in a parallel programming or a multi user environment. == T == thread: In computer science, a thread of execution is the smallest sequence of programmed instructions that can be managed independently by an operating system scheduler. The scheduler itself is a light-weight process. The implementation of threads and processes differs from one operating system to another, but in most cases, a thread is contained inside a process. templating: In an o/s context, templating refers to creating a single virtual machine image as a guest operating system, then saving it as a tool for multiple running virtual machines (Gagne, 2012, p. 716). The technique is used both in virtualization and cloud computing management, and is common in large server warehouses. == U == == V == == W == == Z ==
Vacuum tube characteristics
Vacuum tube characteristics (also called tube curves, valve characteristics or valve curves) describes the electrical relationships between electrode voltages and currents in a vacuum tube. These relationships are commonly presented as characteristic curves in tube manuals and engineering references. The curves typically show plate current versus plate voltage for several fixed control-grid voltages, showing how current varies with electrode potentials under controlled conditions. Designers use them to select operating points, determine voltage gain, estimate output power, and construct graphical load-line analyses. The use of characteristic curves as an engineering tool for analyzing vacuum-tube operation was established in the 1910s, notably in work by Edwin Howard Armstrong. Examples of such curves appear in early tube manuals and textbooks and form the basis of classical vacuum-tube circuit design. Different types of vacuum tubes are characterized using plots appropriate to their electrode structure and intended use. Two-electrode devices such as diodes are described primarily by the relation between plate voltage and plate current. Amplifying tubes containing control grids, such as triodes, tetrodes, pentodes, and beam tetrodes, are represented by families of curves measured for different grid voltages. From these families additional parameters such as amplification factor (μ), transconductance (gm), and plate resistance (rp) may be obtained. Although these plots are used primarily for circuit design, their shapes arise from the underlying physics of electron flow in vacuum tubes. The physical principles responsible for the observed characteristics are discussed in later sections. == 3/2 power law == In high-vacuum thermionic diodes operating under normal conditions, plate current increases nonlinearly with plate voltage. Over the space-charge-limited region, the current is well approximated by the three-halves power relation I p = P ⋅ V p 3 / 2 {\displaystyle I_{p}=P\cdot V_{p}^{3/2}} where P {\displaystyle P} is the perveance of the tube. Perveance is determined primarily by electrode geometry, including cathode area and cathode-to-plate spacing. It provides a practical measure of current-producing capability and is often used in tube manuals in place of a complete family of plate-characteristic curves. == Signal diode characterization == For small-signal diodes, tube manuals typically publish a single static anode characteristic showing anode current (Ia) as a function of anode voltage (Va), measured with the heater operating at its rated voltage. Because the diode contains no control grid, only one such I–V curve is required. The low-voltage portion of the curve is particularly important in detector service, where the nonlinear curvature of the current–voltage relation allows a small alternating signal to produce a net direct-current output, resulting in rectification. In addition to the static characteristic, tube manuals specify heater ratings, maximum plate voltage, permissible average current, and interelectrode capacitance. These parameters define the allowable operating region and high-frequency behavior. Another typical data sheet for a diode is for the Philips EB91 double diode. This book includes curves of the diode response in use as a detector. The output voltage is non-zero for an input voltage of 0 due to the Edison effect. == Rectifier characterization == Vacuum-tube rectifiers intended for power-supply service are specified differently from signal diodes. Their data emphasize heater requirements, peak inverse voltage, maximum peak plate current, permissible DC output current for various filter configurations, and regulation characteristics. Rectifier tubes exhibit nonlinear voltage drop that increases with current. For limited operating ranges this behavior may be represented by an equivalent or effective series resistance corresponding to the local slope of the plate characteristic (dynamic plate resistance, dV/dI). Diode voltages can be determied by use of a graphical aide. In capacitor-input supplies, conduction occurs in pulses near the peaks of the AC waveform, producing peak currents substantially greater than the average DC load current. Data sheets therefore specify maximum peak plate current and permissible filter capacitance in addition to average DC ratings. Under varying load conditions, the supply voltage changes in accordance with the rectifier's nonlinear characteristic and effective impedance. == Triode characterization == === Early use === The systematic use of characteristic curves to explain and quantify vacuum-tube amplification was introduced by Edwin Howard Armstrong in 1914. Using measured plate voltage-current curves, Armstrong demonstrated the mechanism of triode amplification and clarified the operation of grid-leak detection. ==== Plate and transfer characteristics ==== Triode data sheets present families of plate characteristics showing plate current I p {\displaystyle I_{p}} as a function of plate voltage E p {\displaystyle E_{p}} for several fixed grid voltages E g {\displaystyle E_{g}} . From these curves the operating point, voltage gain, and load-line behavior may be determined graphically. In normal operation, plate current depends on both grid and plate voltage. Classical analysis shows that the characteristics for different grid voltages are similar in form and differ primarily by horizontal displacement. In triodes, plate current may be approximated by I p = k ( E g + E p μ ) 3 / 2 {\displaystyle I_{p}=k\left(E_{g}+{\frac {E_{p}}{\mu }}\right)^{3/2}} where E g {\displaystyle E_{g}} is the grid voltage, E p {\displaystyle E_{p}} the plate voltage, μ {\displaystyle \mu } the amplification factor, and k {\displaystyle k} a constant determined by the tube geometry.. The amplification factor μ represents the relative effectiveness of grid voltage compared with plate voltage in controlling current. It is fundamentally determined by structural dimensions, particularly grid-to-cathode spacing relative to plate-to-cathode spacing. ==== Small-signal parameters ==== Triodes are commonly characterized by three interrelated small-signal parameters: Amplification factor ( μ {\displaystyle \mu } ) — the change in plate voltage divided by the change in grid voltage at constant plate current: μ = ( ∂ E p ∂ E g ) I p {\displaystyle \mu =\left({\frac {\partial E_{p}}{\partial E_{g}}}\right)_{I_{p}}} Transconductance ( g m {\displaystyle g_{m}} ) — the change in plate current divided by the change in grid voltage at constant plate voltage: g m = ( ∂ I p ∂ E g ) E p {\displaystyle g_{m}=\left({\frac {\partial I_{p}}{\partial E_{g}}}\right)_{E_{p}}} Plate resistance ( r p {\displaystyle r_{p}} ) — the change in plate voltage divided by the change in plate current at constant grid voltage: r p = ( ∂ E p ∂ I p ) E g {\displaystyle r_{p}=\left({\frac {\partial E_{p}}{\partial I_{p}}}\right)_{E_{g}}} These parameters are related by μ = g m r p {\displaystyle \mu =g_{m}r_{p}} as shown in classical tube theory treatments. These parameters are obtained either from slopes of the characteristic curves or from tabulated operating-point data. ==== Comparison of ECC81, ECC82, and ECC83 ==== The ECC81, ECC82, and ECC83 (also known respectively as 12AT7, 12AU7, and 12AX7) are closely related dual triodes widely used in small-signal amplifier stages. Although similar in construction and envelope size, they differ significantly in electrical parameters due to differences in electrode spacing and grid structure. (Data representative of manufacturer specifications.) The ECC83 exhibits high μ {\displaystyle \mu } and high plate resistance, producing large voltage gain but relatively low current drive capability. The ECC82 has lower μ {\displaystyle \mu } and lower plate resistance, allowing greater current delivery and reduced voltage gain. The ECC81 occupies an intermediate position with comparatively high transconductance and moderate amplification factor. These differences arise primarily from variations in grid pitch, cathode area, and electrode spacing, which determine perveance and amplification factor. Although the external envelope is similar, the internal geometry governs the characteristic curves and small-signal parameters. == Tetrode (screen-grid) characterization == The screen-grid tube (tetrode) was developed primarily to reduce the electrostatic coupling between plate and control grid that limited gain and stability in radio-frequency triode amplifiers. In triodes, the grid–plate capacitance provides feedback from plate to grid, restricting obtainable gain and often requiring neutralization circuits such as those used in neutrodyne receivers. By inserting a positively biased screen grid between control grid and plate, this capacitive coupling is greatly reduced, permitting higher stable gain at radio frequencies. The screen grid, also known as the shield grid or grid 2 (to distinguish it from t
Mortimer Rogoff
Mortimer Alan Rogoff (May 2, 1921 – August 1, 2008) was an American inventor, businessman, and author as well as an amateur photographer and radio operator. He is recognized for his work in spread spectrum technology which is the technology that modern cell phones and GPS systems are based on. He is also considered the grandfather of the electronic navigation chart. == Early life == Rogoff was born in Brooklyn, New York. He earned his B.S.E.E. from Rensselaer Polytechnic Institute in 1943 and his M.S.E.E. from Columbia University in 1948. While at Rensselaer he was a member of Kappa Nu fraternity and the Features Editor for the student newspaper. During World War II, he enlisted in the United States Navy and worked on developing radio communication and aerial navigation systems. One of the techniques he developed was undetectable by Axis forces because its power was below that of the background noise and its frequency varied in random ways. This secure transmission was the beginning of spread spectrum technology which would become the basis for GPS and CDMA cellular telephone systems. Although he was never able to patent the technology because it was a military secret he did get some recognition for it almost forty years later when he received the Institute of Electrical and Electronics Engineers’ Pioneer Award in 1981. == Career == Rogoff worked for twenty-two years (1946 to 1968) for ITT Laboratories in New Jersey. In 1958, he became their deputy director of Engineering. He was Vice President of ITT Laboratories from 1962 to 1963. From 1963 to 1968, he was promoted to the corporate staff where he became head of European operations. In 1968 he left ITT to work for the Diebold Group where he became an Executive Vice President. After leaving the Diebold Group he founded several technology and automation businesses, including his own consulting firm, and Teletext Communications Corporation. Later in the 1970s, he was a Principal with Booz Allen Hamilton. In 1979, his book ‘’Calculator Navigation’’ was published. This book demonstrated practical methods for calculating precise ship locations using radio navigation with a consumer calculator. In 1981, he founded a new company, Navigation Sciences Inc., in Bethesda, Maryland. With this company he patented a method for marine navigation that combined radar maps with electronic charts in 1986. This was a major advancement in field. Today, this system is known as the Electronic Chart Display and Information System (ECDIS). Rogoff had seen the need for a new charting system in 1968 from his apartment at 180 East End Avenue in New York City. From there, he saw a boating accident where a life was lost and decided there had to be a way to automate navigation. Rogoff then became of member of the International Maritime Organization’s (IMO) sub-committee on Safety of Navigation, a representative to the International Electrotechnical Commission, and became the chairman of the Radio Technical Commission for Maritime Services Special Committee 109 on Electronic Charts. He was able to use his influence on these boards to push through a proposal of ECDIS standards in 1989 where none has been before. As his friend Giuseppe Carnevali said, “Although nobody could argue against the need for a standard, no one was ready to endorse one; however, nobody was brave enough to oppose it.” A Test Bed project on these proposals was conducted by the United States Coast Guard. The amended standards were accepted by the IMO in November, 1995. In 2000, he was named as a Fellow of the Institute of Navigation. He was also a Fellow of the Institute of Electrical and Electronics Engineers. During this time, he was also president of the Navigational Electronic Charts System Association. == Personal == In 1979, he moved to Washington, D.C. and bought a home in Nantucket, Massachusetts. He married Sheila Zunser in 1943 and they were together for sixty-five years. They had three daughters: Louisa Thompson, Alice Rogoff, and Julia Peach. His sister was sociologist Natalie Rogoff Ramsøy of the University of Oslo. He was a member of the Cosmos Club and President of The Navigational Electronic Chart System Association (NECSA). He was a very good amateur photographer and liked amateur radio (call sign W2EE). He died in Nantucket from bladder cancer. == Patents == Patent number: 4176316 – Secure Communication System – November 27, 1979 With Louis A. DeRosa Patent number: 4590569 – Electronic Navigation System – May 20, 1986 With Peter M. Winkler and John N. Ackley Patent number: RE34004 – Secure Communication System – July 21, 1992 With Louis A. DeRosa == Publications == Rogoff, Mortimer September 1957. Automatic Analysis of Infrared Spectra. Annals of the New York Academy of Sciences; vol. 69: no. 1: 27–37. Gen. P.C. Sandretto and Mortimer Rogoff. 1958 “A Novel Concept for Application to the Control of Airways Traffic.” NAVIGATION: Journal of The Institute of Navigation; vol. 6: no. 2: 102–107 Rogoff, Mortimer 1979. Calculator Navigation; ISBN 0-393-03192-6. Published by W.W. Norton & Company (New York and London). Rogoff, Mortimer December 1985. Electronic Charting. Yachting; vol. 158: no. 6: 54–57. Rogoff, Mortimer Winter 1990. Electronic Charts in the Nineties. NAVIGATION: Journal of The Institute of Navigation; vol. 37: no. 4: 305–318.
Speculative decoding
Speculative decoding is an inference-time optimization for autoregressive large language models (LLMs) that generates multiple tokens per decoding step instead of one. A smaller draft model proposes a sequence of candidate tokens, and the larger target model verifies them in a single forward pass through a modified rejection sampling scheme. The verification preserves the target model's original output distribution, so the technique produces the same results as standard decoding while cutting latency by roughly two to three times. The name is an analogy to speculative execution in CPU design, where a processor runs instructions along a predicted branch before the outcome is known. == Background == Standard autoregressive decoding in large language models generates one token at a time. The model computes a probability distribution over its vocabulary, samples the next token, and feeds that token back as input. For large models, this process is bottlenecked by memory bandwidth rather than arithmetic throughput: loading the model's parameters from high-bandwidth memory (HBM) to the processor takes up most of the wall-clock time at each step. Because of this, a forward pass over one token and a forward pass over several tokens in a batch take roughly the same time. Speculative decoding relies on this property. == Mechanism == The technique alternates between two phases: drafting and verification. During drafting, a fast approximation model generates a short run of K candidate tokens, typically between 3 and 12. The draft model is usually a much smaller version of the target model or a lightweight auxiliary network. During verification, the target model scores the entire draft sequence in one batched forward pass. A modified rejection sampling algorithm compares the draft and target probabilities at each position. If the target model would have been at least as likely to produce a given token, that token is accepted; the first token that fails is resampled from a corrected distribution, and everything after it is thrown out. The result is that the output distribution is the same as if each token had been generated one at a time. How many tokens get accepted per cycle depends on how well the draft model matches the target. For common words and predictable continuations the match tends to be good, so the target model can confirm several tokens at once. == History == An early precursor was blockwise parallel decoding, proposed in 2018 by Stern, Shazeer, and Uszkoreit. Their method predicted multiple future tokens through auxiliary prediction heads and validated them against the autoregressive model, but it only worked with greedy decoding and did not preserve the full sampling distribution. The modern form of the technique came from Yaniv Leviathan, Matan Kalman, and Yossi Matias at Google Research, who posted "Fast Inference from Transformers via Speculative Decoding" on arXiv in November 2022. Separately and at about the same time, Charlie Chen and colleagues at DeepMind arrived at a closely related method they called speculative sampling, published in February 2023. Both papers introduced the use of rejection sampling to guarantee that the output distribution is unchanged. Leviathan et al. showed roughly 2–3x speedup on T5-XXL (11 billion parameters); Chen et al. reported 2–2.5x on the Chinchilla model (70 billion parameters). The Leviathan et al. paper was presented as an oral at the International Conference on Machine Learning in July 2023. == Variants == SpecInfer (Miao et al., 2024) uses multiple small language models to jointly build a tree of candidate continuations rather than a single chain. The target model verifies the whole tree in parallel and keeps the longest valid path, with reported speedups of 1.5–3.5x. Medusa (Cai et al., 2024) takes a different approach by not using a separate draft model at all. Extra lightweight decoding heads are attached to the target model itself, and each one predicts a token at a different future position. The candidates are evaluated through a tree-structured attention mechanism. The authors measured 2.2–3.6x speedup. EAGLE (Li et al., 2024) performs autoregression on the target model's internal feature representations (specifically the second-to-top layer) rather than on tokens directly. On LLaMA 2 Chat 70B, this gave a 2.7–3.5x latency reduction. Later versions added dynamic draft trees (EAGLE-2) and further optimizations (EAGLE-3), reaching 3–6.5x speedup. == Adoption == By 2024, speculative decoding had become a standard part of production LLM serving. Google uses it in the AI Overviews feature of Google Search. Open-source inference frameworks such as vLLM, NVIDIA's TensorRT-LLM, and SGLang all include built-in support for speculative decoding and its variants. Apple, AWS, and Meta have also published research extending the method or deploying it at scale.
Digital exhibition
Digital Exhibition includes both the projection technologies, such as High Definition, and delivery technologies of a film to a movie theater. Delivery technologies include disk drives, satellite relay, and fiber optics. This can save money in distribution but is usually more expensive overall due to maintenance and standardization of technology. However, there are benefits to digital exhibition, for example it requires less assembly by the exhibitor and can contain the trailers that the distributor wishes.