Semantic parameterization is a conceptual modeling process for expressing natural language descriptions of a domain in first-order predicate logic. The process yields a formalization of natural language sentences in Description Logic to answer the who, what and where questions in the Inquiry-Cycle Model (ICM) developed by Colin Potts and his colleagues at the Georgia Institute of Technology. The parameterization process complements the Knowledge Acquisition and autOmated Specification (KAOS) method, which formalizes answers to the when, why and how ICM questions in Temporal Logic, to complete the ICM formalization. The artifacts used in the parameterization process include a dictionary that aligns the domain lexicon with unique concepts, distinguishing between synonyms and polysemes, and several natural language patterns that aid in mapping common domain descriptions to formal specifications. == Relationship to other theories == Semantic Parameterization defines a meta-model consisting of eight roles that are domain-independent and reusable. Seven of these roles correspond to Jeffrey Gruber's thematic relations and case roles in Charles Fillmore's case grammar: The Inquiry-Cycle Model (ICM) was introduced to drive elicitation between engineers and stakeholders in requirements engineering. The ICM consists of who, what, where, why, how and when questions. All but the when questions, which require a Temporal Logic to represent such phenomena, have been aligned with the meta-model in semantic parameterization using Description Logic (DL). == Introduction with Example == The semantic parameterization process is based on Description Logic, wherein the TBox is composed of words in a dictionary, including nouns, verbs, and adjectives, and the ABox is partitioned into two sets of assertions: 1) those assertions that come from words in the natural language statement, called the grounding, and 2) those assertions that are inferred by the (human) modeler, called the meta-model. Consider the following unstructured natural language statement (UNLS) (see Breaux et al. for an extended discussion): UNLS1.0 The customer1,1 must not share2,2 the access-code3,3 of the customer1,1 with someone4,4 who is not the provider5,4. The modeler first identifies intensional and extensional polysemes and synonyms, denoted by the subscripts: the first subscript uniquely refers to the intensional index, i.e., the same first index in two or more words refer to the same concept in the TBox; the second subscript uniquely refers to the extensional index, i.e., two same second index in two or more words refer to the same individual in the ABox. This indexing step aligns words in the statement and concepts in the dictionary. Next, the modeler identifies concepts from the dictionary to compose the meta-model. The following table illustrates the complete DL expression that results from applying semantic parameterization.
Automatic meter reading
Automatic meter reading (AMR) is the technology of automatically collecting consumption, diagnostic, and status data from water meter or energy metering devices (gas, electric) and transferring that data to a central database for billing, troubleshooting, and analyzing. This technology mainly saves utility providers the expense of periodic trips to each physical location to read a meter. Another advantage is that billing can be based on near real-time consumption rather than on estimates based on past or predicted consumption. This timely information coupled with analysis can help both utility providers and customers better control the use and production of electric energy, gas usage, or water consumption. AMR technologies include handheld, mobile and network technologies based on telephony platforms (wired and wireless), radio frequency (RF), or powerline transmission. == Technologies == === Touch technology === With touch-based AMR, a meter reader carries a handheld computer or data collection device with a wand or probe. The device automatically collects the readings from a meter by touching or placing the read probe close to a reading coil enclosed in the touchpad. When a button is pressed, the probe sends an interrogate signal to the touch module to collect the meter reading. The software in the device matches the serial number to one in the route database, and saves the meter reading for later download to a billing or data collection computer. Since the meter reader still has to go to the site of the meter, this is sometimes referred to as "on-site" AMR. Another form of contact reader uses a standardized infrared port to transmit data. Protocols are standardized between manufacturers by such documents as ANSI C12.18 or IEC 61107. === AMR hosting === AMR hosting is a back-office solution which allows a user to track their electricity, water, or gas consumption over the Internet. All data is collected in near real-time, and is stored in a database by data acquisition software. The user can view the data via a web application, and can analyze the data using various online analysis tools such as charting load profiles, analyzing tariff components, and verify their utility bill. === Radio frequency network === Radio frequency based AMR can take many forms. The more common ones are handheld, mobile, satellite and fixed network solutions. There are both two-way RF systems and one-way RF systems in use that use both licensed and unlicensed RF bands. In a two-way or "wake up" system, a radio signal is normally sent to an AMR meter's unique serial number, instructing its transceiver to power-up and transmit its data. The meter transceiver and the reading transceiver both send and receive radio signals. In a one-way "bubble-up" or continuous broadcast type system, the meter transmits continuously and data is sent every few seconds. This means the reading device can be a receiver only, and the meter a transmitter only. Data travels only from the meter transmitter to the reading receiver. There are also hybrid systems that combine one-way and two-way techniques, using one-way communication for reading and two-way communication for programming functions. RF-based meter reading usually eliminates the need for the meter reader to enter the property or home, or to locate and open an underground meter pit. The utility saves money by increased speed of reading, has less liability from entering private property, and has fewer missed readings from being unable to access the meter. The technology based on RF is not readily accepted everywhere. In several Asian countries, the technology faces a barrier of regulations in place pertaining to use of the radio frequency of any radiated power. For example, in India the radio frequency which is generally in ISM band is not free to use even for low power radio of 10 mW. The majority of manufacturers of electricity meters have radio frequency devices in the frequency band of 433/868 MHz for large scale deployment in European countries. The frequency band of 2.4 GHz can be now used in India for outdoor as well as indoor applications, but few manufacturers have shown products within this frequency band. Initiatives in radio frequency AMR in such countries are being taken up with regulators wherever the cost of licensing outweighs the benefits of AMR. ==== Handheld ==== In handheld AMR, a meter reader carries a handheld computer with a built-in or attached receiver/transceiver (radio frequency or touch) to collect meter readings from an AMR capable meter. This is sometimes referred to as "walk-by" meter reading since the meter reader walks by the locations where meters are installed as they go through their meter reading route. Handheld computers may also be used to manually enter readings without the use of AMR technology as an alternate but this will not support exhaustive data which can be accurately read using the meter reading electronically. ==== Mobile ==== Mobile or "drive-by" meter reading is where a reading device is installed in a vehicle. The meter reader drives the vehicle while the reading device automatically collects the meter readings. Often, for mobile meter reading, the reading equipment includes navigational and mapping features provided by GPS and mapping software. With mobile meter reading, the reader does not normally have to read the meters in any particular route order, but just drives the service area until all meters are read. Components often consist of a laptop or proprietary computer, software, RF receiver/transceiver, and external vehicle antennas. ==== Satellite ==== Transmitters for data collection satellites can be installed in the field next to existing meters. The satellite AMR devices communicate with the meter for readings, and then sends those readings over a fixed or mobile satellite network. This network requires a clear view to the sky for the satellite transmitter/receiver, but eliminates the need to install fixed towers or send out field technicians, thereby being particularly suited for areas with low geographic meter density. ==== RF technologies commonly used for AMR ==== Narrow Band (single fixed radio frequency) Spread spectrum Direct-sequence spread spectrum (DSSS) Frequency-hopping spread spectrum (FHSS) There are also meters using AMR with RF technologies such as cellular phone data systems, Zigbee, Bluetooth, Wavenis and others. Some systems operate with U.S. Federal Communications Commission (FCC) licensed frequencies and others under FCC Part 15, which allows use of unlicensed radio frequencies. ==== Wi-Fi ==== WiSmart is a versatile platform which can be used by a variety of electrical home appliances in order to provide wireless TCP/IP communication using the 802.11 b/g protocol. Devices such as the Smart Thermostat permit a utility to lower a home's power consumption to help manage power demand. The city of Corpus Christi became one of the first cities in the United States to implement citywide Wi-Fi, which had been free until May 31, 2007, mainly to facilitate AMR after a meter reader was attacked by a dog. Today many meters are designed to transmit using Wi-Fi, even if a Wi-Fi network is not available, and they are read using a drive-by local Wi-Fi hand held receiver. The meters installed in Corpus Christi are not directly Wi-Fi enabled, but rather transmit narrow-band burst telemetry on the 460 MHz band. This narrow-band signal has much greater range than Wi-Fi, so the number of receivers required for the project are far fewer. Special receiver stations then decode the narrow-band signals and resend the data via Wi-Fi. Most of the automated utility meters installed in the Corpus Christi area are battery powered. Wi-Fi technology is unsuitable for long-term battery-powered operation. === Power line communication === PLC is a method where electronic data is transmitted over power lines back to the substation, then relayed to a central computer in the utility's main office. This would be considered a type of fixed network system—the network being the distribution network which the utility has built and maintains to deliver electric power. Such systems are primarily used for electric meter reading. Some providers have interfaced gas and water meters to feed into a PLC type system. == Brief history == In 1972, Theodore George "Ted" Paraskevakos, while working with Boeing in Huntsville, Alabama, developed a sensor monitoring system which used digital transmission for security, fire and medical alarm systems as well as meter reading capabilities for all utilities. This technology was a spin-off of the automatic telephone line identification system, now known as caller ID. In 1974, Paraskevakos was awarded a U.S. patent for this technology. In 1977, he launched Metretek, Inc., which developed and produced the first fully automated, commercially available remote meter reading and load management system. Since this system was developed pre-Internet, Metret
GraphLab
Turi is a graph-based, high performance, distributed computation framework written in C++. The GraphLab project was started by Prof. Carlos Guestrin of Carnegie Mellon University in 2009. It is an open source project that uses the Apache License. While GraphLab was originally developed for machine learning tasks, it has also been developed for other data-mining tasks. == Motivation == As the amounts of collected data and computing power grow (multicore, GPUs, clusters, clouds), modern datasets no longer fit into one computing node. Efficient distributed parallel algorithms for handling large-scale data are required. The GraphLab framework is a parallel programming abstraction targeted for sparse iterative graph algorithms. GraphLab provides a programming interface, allowing deployment of distributed machine learning algorithms. The main design considerations behind the design of GraphLab are: Sparse data with local dependencies Iterative algorithms Potentially asynchronous execution == GraphLab toolkits == On top of GraphLab, several implemented libraries of algorithms: Topic modeling - contains applications like LDA, which can be used to cluster documents and extract topical representations. Graph analytics - contains applications like pagerank and triangle counting, which can be applied to general graphs to estimate community structure. Clustering - contains standard data clustering tools such as Kmeans Collaborative filtering - contains a collection of applications used to make predictions about users interests and factorize large matrices. Graphical models - contains tools for making joint predictions about collections of related random variables. Computer vision - contains a collection of tools for reasoning about images. == Turi == Turi (formerly called Dato and before that GraphLab Inc.) is a company that was founded by Prof. Carlos Guestrin from University of Washington in May 2013 to continue development support of the GraphLab open source project. Dato Inc. raised a $6.75M Series A from Madrona Venture Group and New Enterprise Associates (NEA). They raised a $18.5M Series B from Vulcan Capital and Opus Capital, with participation from Madrona and NEA. On August 5, 2016, Turi was acquired by Apple Inc. for $200,000,000.
Detrended correspondence analysis
Detrended correspondence analysis (DCA) is a multivariate statistical technique widely used by ecologists to find the main factors or gradients in large, species-rich but usually sparse data matrices that typify ecological community data. DCA is frequently used to suppress artifacts inherent in most other multivariate analyses when applied to gradient data. == History == DCA was created in 1979 by Mark Hill of the United Kingdom's Institute for Terrestrial Ecology (now merged into Centre for Ecology and Hydrology) and implemented in FORTRAN code package called DECORANA (Detrended Correspondence Analysis), a correspondence analysis method. DCA is sometimes erroneously referred to as DECORANA; however, DCA is the underlying algorithm, while DECORANA is a tool implementing it. == Issues addressed == According to Hill and Gauch, DCA suppresses two artifacts inherent in most other multivariate analyses when applied to gradient data. An example is a time-series of plant species colonising a new habitat; early successional species are replaced by mid-successional species, then by late successional ones (see example below). When such data are analysed by a standard ordination such as a correspondence analysis: the ordination scores of the samples will exhibit the 'edge effect', i.e. the variance of the scores at the beginning and the end of a regular succession of species will be considerably smaller than that in the middle, when presented as a graph the points will be seen to follow a horseshoe shaped curve rather than a straight line ('arch effect'), even though the process under analysis is a steady and continuous change that human intuition would prefer to see as a linear trend. Outside ecology, the same artifacts occur when gradient data are analysed (e.g. soil properties along a transect running between 2 different geologies, or behavioural data over the lifespan of an individual) because the curved projection is an accurate representation of the shape of the data in multivariate space. Ter Braak and Prentice (1987, p. 121) cite a simulation study analysing two-dimensional species packing models resulting in a better performance of DCA compared to CA. == Method == DCA is an iterative algorithm that has shown itself to be a highly reliable and useful tool for data exploration and summary in community ecology (Shaw 2003). It starts by running a standard ordination (CA or reciprocal averaging) on the data, to produce the initial horse-shoe curve in which the 1st ordination axis distorts into the 2nd axis. It then divides the first axis into segments (default = 26), and rescales each segment to have mean value of zero on the 2nd axis - this effectively squashes the curve flat. It also rescales the axis so that the ends are no longer compressed relative to the middle, so that 1 DCA unit approximates to the same rate of turnover all the way through the data: the rule of thumb is that 4 DCA units mean that there has been a total turnover in the community. Ter Braak and Prentice (1987, p. 122) warn against the non-linear rescaling of the axes due to robustness issues and recommend using detrending-by-polynomials only. == Drawbacks == No significance tests are available with DCA, although there is a constrained (canonical) version called DCCA in which the axes are forced by Multiple linear regression to correlate optimally with a linear combination of other (usually environmental) variables; this allows testing of a null model by Monte-Carlo permutation analysis. == Example == The example shows an ideal data set: The species data is in rows, samples in columns. For each sample along the gradient, a new species is introduced but another species is no longer present. The result is a sparse matrix. Ones indicate the presence of a species in a sample. Except at the edges each sample contains five species. The plot of the first two axes of the correspondence analysis result on the right hand side clearly shows the disadvantages of this procedure: the edge effect, i.e. the points are clustered at the edges of the first axis, and the arch effect. == Software == An open source implementation of DCA, based on the original FORTRAN code, is available in the vegan R-package.
Random neural network
The Random Neural Network (RNN) is a mathematical representation of an interconnected network of neurons or cells which exchange spiking signals. It was invented by Erol Gelenbe and is linked to the G-network model of queueing networks which Erol Gelenbe also invented, and with his Gene Regulatory Network models. In this model, each neuronal cell state is represented by an integer whose value rises when the cell receives an excitatory spike and drops when it receives an inhibitory spike. The spikes can originate outside the network itself, or they can come from other cells in the networks. Cells whose internal excitatory state has a positive value are allowed to send out spikes of either kind to other cells in the network according to specific cell-dependent spiking rates. The model has a mathematical solution in steady-state which provides the joint probability distribution of the network in terms of the individual probabilities that each cell is excited and able to send out spikes. Computing this solution is based on solving a set of non-linear algebraic equations whose parameters are related to the spiking rates of individual cells and their connectivity to other cells, as well as the arrival rates of spikes from outside the network. The RNN is a recurrent model, i.e. a neural network that is allowed to have complex feedback loops. A highly energy-efficient implementation of random neural networks was demonstrated by Krishna Palem et al. using the Probabilistic CMOS or PCMOS technology and was shown to be c. 226–300 times more efficient in terms of Energy-Performance-Product. RNNs are also related to artificial neural networks, which (like the random neural network) have gradient-based learning algorithms. The learning algorithm for an n-node random neural network that includes feedback loops (it is also a recurrent neural network) is of computational complexity O(n^3) (the number of computations is proportional to the cube of n, the number of neurons). The random neural network can also be used with other learning algorithms such as reinforcement learning. The RNN has been shown to be a universal approximator for bounded and continuous functions.
Kindara
Kindara is a femtech company headquartered in Colorado that develops apps that help women identify their fertile window. The products are used for women trying to get pregnant, or women who want to track their menstrual cycle for overall health. Their latest product, Priya Fertility and Ovulation Monitor, maximizes a woman's chance of getting pregnancy by identifying her most fertile days. == Overview == Kindara was founded in 2011 by husband-and-wife team Will Sacks and Kati Bicknell. The company launched its free mobile application in 2012. Kindara's mobile application allows women to track signs of fertility, such as basal body temperature, cervical fluid, and the position of the cervix to determine when ovulation is occurring. Kindara also sells a thermometer, Wink, which records basal body temperature and syncs automatically to the Kindara fertility application. In 2018, Kindara was acquired by the company Prima-Temp.
Neural Networks (journal)
Neural Networks is a monthly peer-reviewed scientific journal and an official journal of the International Neural Network Society, European Neural Network Society, and Japanese Neural Network Society. == History == The journal was established in 1988 and is published by Elsevier. It covers all aspects of research on artificial neural networks. The founding editor-in-chief was Stephen Grossberg (Boston University). The current editors-in-chief are DeLiang Wang (Ohio State University) and Taro Toyoizumi (RIKEN Center for Brain Science). == Abstracting and indexing == The journal is abstracted and indexed in Scopus and the Science Citation Index Expanded. According to the Journal Citation Reports, the journal has a 2022 impact factor of 7.8.