Elowan is a plant-robot cyborg. Using its own internal bioelectrical signals, The plant has a robotic extension that makes it move towards light sources. Electrodes are inserted into the leaves, stem, and ground to detect the faint bioelectrical signals the plant produces. Then they are amplified so the robot can read them. So when the plant "wants" to go to light, the cyborg automatically goes to the nearest light source. Future extensions of the robot could provide: Protection, growth frameworks, and nutrients. Other factors that could make the cyborg move are temperature, soil, and gravity conditions Elowan is one in a series of plant-electronic hybrid experiments.
NAPLPS
NAPLPS (North American Presentation Layer Protocol Syntax) is a graphics language for use originally with videotex and teletext services. NAPLPS was developed from the Telidon system developed in Canada, with a small number of additions from AT&T Corporation. The basics of NAPLPS were later used as the basis for several other microcomputer-based graphics systems. == History == The Canadian Communications Research Centre (CRC), based in Ottawa, had been working on various graphics systems since the late 1960s, much of it led by Herb Bown. Through the 1970s they turned their attention to building out a system of "picture description instructions", which encoded graphics commands as a text stream. Graphics were encoded as a series of instructions (graphics primitives) each represented by a single ASCII character. Graphic coordinates were encoded in multiple 6-bit strings of XY coordinate data, flagged to place them in the printable ASCII range so that they could be transmitted with conventional text transmission techniques. ASCII SI/SO characters were used to differentiate the text from graphic portions of a transmitted "page". These instructions were decoded by separate programs to produce graphics output, on a plotter for instance. Other work produced a fully interactive version. In 1975, the CRC gave a contract to Norpak to develop an interactive graphics terminal that could decode the instructions and display them on a color display. During this period, a number of companies were developing the first teletext systems, notably the BBC's Ceefax system. Ceefax encoded character data into the lines in the vertical blanking interval of normal television signals where they could not be seen on-screen, and then used a buffer and decoder in the user's television to convert these into "pages" of text on the display. The Independent Broadcasting Authority quickly introduced their own ORACLE system, and the two organizations subsequently agreed to use a single standard, the "Broadcast Teletext Specification". This later became World System Teletext. At about the same time, other organizations were developing videotex systems, similar to teletext except they used modems to transmit their data instead of television signals. This was potentially slower and used up a telephone line, but had the major advantage of allowing the user to transmit data back to the sender. The UK's General Post Office developed a system using the Ceefax/ORACLE standard, launching it as Prestel, while France prepared the first steps for its ultimately very successful Minitel system, using a rival display standard called Antiope. By 1977, the Norpak system was running, and from this work the CRC decided to create their own teletext/videotext system. Unlike the systems being rolled out in Europe, the CRC decided from the start that the system should be able to run on any combination of communications links. For instance, it could use the vertical blanking interval to send data to the user, and a modem to return selections to the servers. It could be used in a one-way or two-way system. In teletext mode, character codes were sent to users' televisions by encoding them as dot patterns in the vertical blanking interval of the video signal. Various technical "tweaks" and details of the NTSC signals used by North American televisions allowed the downstream videotex channel to increase to 600 bit/s, about twice that used in the European systems. In videotext mode, Bell 202 modems were typical, offering a 1,200 bit/s download rate. A set top box attached to the TV decoded these signals back into text and graphics pages, which the user could select among. The system was publicly launched as Telidon on August 15, 1978. Compared to the European standards, the CRC system was faster, bi-directional, and offered real graphics as opposed to simple character graphics. The downside of the system was that it required much more advanced decoders, typically featuring Zilog Z80 or Motorola 6809 processors with RGB and/or RF output. The Innovation, Science and Economic Development Canada (then Department of Communications) launched a four-year plan to fund public roll-outs of the technology in an effort to spur the development of a commercial Telidon system. AT&T Corporation was so impressed by Telidon that they decided to join the project. They added a number of useful extensions, notably the ability to define original graphics commands (macro) and character sets (DRCS). They also tabled algorithms for proportionally spaced text, which greatly improved the quality of the displayed pages. A joint CSA/ANSI working group (X3L2.1) revised the specifications, which were submitted for standardization. In 1983, they became CSA T500 and ANSI X3.110, or NAPLPS. The data encoding system was also standardized as the NABTS (North American Broadcast Teletext Specification) protocol. Business models for Telidon services were poorly developed. Unlike the UK, where teletext was supported by one of only two large companies whose whole revenue model was based on a read-only medium (television), in North America Telidon was being offered by companies who worked on a subscriber basis. == One-way systems == Telidon-based teletext was tested in a few North American trials in the early 1980s — CBC IRIS, TVOntario, MTS-sponsored Project IDA, to name a few. NAPLPS was also part of the NABTS teletext standard, for the encoding and display of teletext pages. In the late 1980s and early 1990s, affiliates of the regional sports network group SportsChannel ran a service called Sports Plus Network, which ran sports news and scores while SportsChannel was not otherwise on the air. The screens, which frequently featured team logos or likenesses of players in addition to text, were drawn entirely with NAPLPS graphics and resembled the loading of Prodigy pages over a modem, though slightly faster. == Two-way systems == Various two-way systems using NAPLPS appeared in North America in the early 1980s. The biggest North American examples were Knight Ridder's Viewtron (based in Miami) and the Los Angeles Times' Gateway service (based in Orange County). Both used the Sceptre NAPLPS terminal from AT&T. The Sceptre contained a slow modem that connected over the consumer's telephone line to host computers. The Sceptre was expensive whether purchased or rented. Despite huge investments by their parent companies, neither Viewtron nor Gateway lasted into the second half of the decade. Another system, Keyfax, was developed by Keycom Electronic Publishing, a joint venture of Honeywell, Centel (since acquired by Sprint) and Field Enterprises, then-owner of the Chicago Sun-Times newspaper. Keyfax had originally been a WST teletext service, broadcast overnights on Field's Chicago television station WFLD-32 and through the VBI of both WFLD and national superstation WTBS; the decision was made to convert Keyfax into a subscription service, using a proprietary NAPLPS terminal device in a last-ditch effort to save the service. It did not work and Keyfax had ceased operations by the end of 1986. Other early-1980s NAPLPS technology was deployed in Canada, both as a way for rural Canadians to get news and weather information and as the platform for touchscreen information kiosks. In Vancouver these were featured at Expo 86. The kiosks became ubiquitous in Toronto under the name Teleguide, and were deployed in many shopping centres and at major tourist attractions. The latter city was the North American nexus of NAPLPS and the home of Norpak, the most successful of NAPLPS-oriented developers. Norpak created and sold hardware and software for NAPLPS development and display. TVOntario also developed NAPLPS content creation software. London, Ontario - based Cableshare used NAPLPS as the basis of touch-screen information kiosks for shopping malls, the flagship of which was deployed at Toronto's Eaton Centre. The system relied on an 8085-based microcomputer which drove several NAPLPS terminals fitted with touch screens, all communicating via Datapac to a back end database. The system offered news, weather and sports information along with shopping mall guides and coupons. Cableshare also developed and sold a leading NAPLPS page creation utility called the "Picture Painter." In the late 1980s, Tribune Media Services (TMS) and the Associated Press operated a cable television channel called AP News Plus that provided NAPLPS-based news screens to cable television subscribers in many U.S. cities. The news pages were created and edited by TMS staffers working on an Atex editing system in Orlando, Florida, and sent by satellite to NAPLPS decoder devices located at the local cable television companies. Among the firms providing technology to TMS and the Associated Press for the AP News Plus channel was Minneapolis-based Electronic Publishers Inc. (1985–1988). In 1981, two amateur radio operators (VE3FTT and VE3GQW) received special permission from the Canad
Private cloud computing infrastructure
Private cloud computing infrastructure is a category of cloud computing that provides comparable benefits to public cloud systems, such as self-service and scalability, but it does so via a proprietary framework. In contrast to public clouds, which cater to multiple entities, a private cloud is specifically designed for the requirements and objectives of one organization. == Definition == A private cloud computing infrastructure constitutes a distinctive model of cloud computing that facilitates a secure and distinct cloud environment where only the intended client can function. It can either be physically housed in the organization's in-house data center or be managed by a third-party provider. In a private cloud, the infrastructure and services are always sustained on a private network, and both the hardware and software are devoted exclusively to a single organization. == History == The concept of private cloud infrastructure started to take shape around the mid-2000s, coinciding with the rise of other cloud computing forms. It came into existence as a solution to the shortcomings of public clouds, particularly concerns over data control, security, and network performance. IT departments began to mirror the automation and self-service features of the public cloud in their data centers. Over time, these services became more advanced, and private cloud technology has been refined to address businesses and organizations' diverse needs. == Architecture == Private cloud computing infrastructure generally involves a mix of hardware, network infrastructure, and virtualization software. The hardware, often referred to as a cloud server or cloud array, consists of a server rack or a collection of server racks containing the storage and processors that constitute the cloud. The virtualization software, such as Hyper-V, OpenStack, or VMWare, establishes and oversees virtual machines with which users interact. The network infrastructure connects the private cloud to users and may facilitate connectivity with other on-premises data centers or clouds. == Applications == Private cloud infrastructures are usually utilized by medium to large businesses and organizations that need robust control over their data, have extensive computing needs, or have specific regulatory or compliance obligations. This includes healthcare organizations, government agencies, financial institutions, and any business that needs to process and store large data volumes.
30 Boxes
30 Boxes is a minimalist calendaring IOS application created by 83 Degrees. Originating as a web application in March 2006, 30 Boxes was founded by Webshots cofounder Narendra Rocherolle. The website shut down some time in 2020, but relaunched for the IOS in February 2021. The original website was tailored towards "social media junkies". == Reception == Barry Collins of The Sunday Times appreciated the website's plain-language event adding feature, but did not appreciate that he was unable to see more than one month of events at a time. Collins was also unhappy that the website was not capable of warning him when he had two events scheduled at the same time. In a list of the best web-based calendar software for small businesses, Forbes ranked 30 Boxes second, after Google Calendar. They described 30 Boxes like “buying a new car with manual transmission and lots of extras—you don't just want to drive it, you want to fool around with it to see what it can do”.
LiveChat
LiveChat is an AI customer service software with chatbot, online chat, help desk software, and web analytics capabilities. LiveChat is used by over 76,000 companies. It was first launched in 2002 and is offered via a SaaS (software as a service) business model by Text. Organizations use LiveChat as a single point of contact to manage customer service and online sales activities with a single program. == Product == LiveChat is proprietary software. LiveChat's website chat widget can be embedded on customers' websites as a small chat box, often displayed in the bottom right corner of the web browser. It can be used to conduct chats, share files and save transcripts. The agent application is used by company employees to respond to questions asked by the customers. This is available through both web-based application, desktop applications, and mobile apps. Web chat sessions can be initiated by the visiting customer, or by the agent, either manually or automatically by the LiveChat system when the visitor meets the predefined criteria (i.e. searched keyword, time on website, encountered error, etc.). LiveChat's system attempts to identify the best prospects visiting a website based on data gathered from past purchasing decisions. Other features include real-time website traffic monitoring, built-in ticketing system and agents' efficiency analytics. LiveChat is available in 48 languages. == Research and reception == Reviewing LiveChat's usefulness for online learning in 2020, psychologist Jaclyn Broadbent said "LiveChat occurs as a real-time conversation, it can be time-consuming for staff and disruptive to other tasks." However, using it has resulted in reduced communication traffic from other channels, such as the discussion boards or email. As a teacher, the best time to be available on LiveChat is when you are doing other administrative jobs." Since 2014 LiveChat has been publishing Customer Service Report - an annual study of customer satisfaction and analysis of online business communication trends. It includes research of thousands of companies and millions of customer service email and live support interactions.
NAPLPS
NAPLPS (North American Presentation Layer Protocol Syntax) is a graphics language for use originally with videotex and teletext services. NAPLPS was developed from the Telidon system developed in Canada, with a small number of additions from AT&T Corporation. The basics of NAPLPS were later used as the basis for several other microcomputer-based graphics systems. == History == The Canadian Communications Research Centre (CRC), based in Ottawa, had been working on various graphics systems since the late 1960s, much of it led by Herb Bown. Through the 1970s they turned their attention to building out a system of "picture description instructions", which encoded graphics commands as a text stream. Graphics were encoded as a series of instructions (graphics primitives) each represented by a single ASCII character. Graphic coordinates were encoded in multiple 6-bit strings of XY coordinate data, flagged to place them in the printable ASCII range so that they could be transmitted with conventional text transmission techniques. ASCII SI/SO characters were used to differentiate the text from graphic portions of a transmitted "page". These instructions were decoded by separate programs to produce graphics output, on a plotter for instance. Other work produced a fully interactive version. In 1975, the CRC gave a contract to Norpak to develop an interactive graphics terminal that could decode the instructions and display them on a color display. During this period, a number of companies were developing the first teletext systems, notably the BBC's Ceefax system. Ceefax encoded character data into the lines in the vertical blanking interval of normal television signals where they could not be seen on-screen, and then used a buffer and decoder in the user's television to convert these into "pages" of text on the display. The Independent Broadcasting Authority quickly introduced their own ORACLE system, and the two organizations subsequently agreed to use a single standard, the "Broadcast Teletext Specification". This later became World System Teletext. At about the same time, other organizations were developing videotex systems, similar to teletext except they used modems to transmit their data instead of television signals. This was potentially slower and used up a telephone line, but had the major advantage of allowing the user to transmit data back to the sender. The UK's General Post Office developed a system using the Ceefax/ORACLE standard, launching it as Prestel, while France prepared the first steps for its ultimately very successful Minitel system, using a rival display standard called Antiope. By 1977, the Norpak system was running, and from this work the CRC decided to create their own teletext/videotext system. Unlike the systems being rolled out in Europe, the CRC decided from the start that the system should be able to run on any combination of communications links. For instance, it could use the vertical blanking interval to send data to the user, and a modem to return selections to the servers. It could be used in a one-way or two-way system. In teletext mode, character codes were sent to users' televisions by encoding them as dot patterns in the vertical blanking interval of the video signal. Various technical "tweaks" and details of the NTSC signals used by North American televisions allowed the downstream videotex channel to increase to 600 bit/s, about twice that used in the European systems. In videotext mode, Bell 202 modems were typical, offering a 1,200 bit/s download rate. A set top box attached to the TV decoded these signals back into text and graphics pages, which the user could select among. The system was publicly launched as Telidon on August 15, 1978. Compared to the European standards, the CRC system was faster, bi-directional, and offered real graphics as opposed to simple character graphics. The downside of the system was that it required much more advanced decoders, typically featuring Zilog Z80 or Motorola 6809 processors with RGB and/or RF output. The Innovation, Science and Economic Development Canada (then Department of Communications) launched a four-year plan to fund public roll-outs of the technology in an effort to spur the development of a commercial Telidon system. AT&T Corporation was so impressed by Telidon that they decided to join the project. They added a number of useful extensions, notably the ability to define original graphics commands (macro) and character sets (DRCS). They also tabled algorithms for proportionally spaced text, which greatly improved the quality of the displayed pages. A joint CSA/ANSI working group (X3L2.1) revised the specifications, which were submitted for standardization. In 1983, they became CSA T500 and ANSI X3.110, or NAPLPS. The data encoding system was also standardized as the NABTS (North American Broadcast Teletext Specification) protocol. Business models for Telidon services were poorly developed. Unlike the UK, where teletext was supported by one of only two large companies whose whole revenue model was based on a read-only medium (television), in North America Telidon was being offered by companies who worked on a subscriber basis. == One-way systems == Telidon-based teletext was tested in a few North American trials in the early 1980s — CBC IRIS, TVOntario, MTS-sponsored Project IDA, to name a few. NAPLPS was also part of the NABTS teletext standard, for the encoding and display of teletext pages. In the late 1980s and early 1990s, affiliates of the regional sports network group SportsChannel ran a service called Sports Plus Network, which ran sports news and scores while SportsChannel was not otherwise on the air. The screens, which frequently featured team logos or likenesses of players in addition to text, were drawn entirely with NAPLPS graphics and resembled the loading of Prodigy pages over a modem, though slightly faster. == Two-way systems == Various two-way systems using NAPLPS appeared in North America in the early 1980s. The biggest North American examples were Knight Ridder's Viewtron (based in Miami) and the Los Angeles Times' Gateway service (based in Orange County). Both used the Sceptre NAPLPS terminal from AT&T. The Sceptre contained a slow modem that connected over the consumer's telephone line to host computers. The Sceptre was expensive whether purchased or rented. Despite huge investments by their parent companies, neither Viewtron nor Gateway lasted into the second half of the decade. Another system, Keyfax, was developed by Keycom Electronic Publishing, a joint venture of Honeywell, Centel (since acquired by Sprint) and Field Enterprises, then-owner of the Chicago Sun-Times newspaper. Keyfax had originally been a WST teletext service, broadcast overnights on Field's Chicago television station WFLD-32 and through the VBI of both WFLD and national superstation WTBS; the decision was made to convert Keyfax into a subscription service, using a proprietary NAPLPS terminal device in a last-ditch effort to save the service. It did not work and Keyfax had ceased operations by the end of 1986. Other early-1980s NAPLPS technology was deployed in Canada, both as a way for rural Canadians to get news and weather information and as the platform for touchscreen information kiosks. In Vancouver these were featured at Expo 86. The kiosks became ubiquitous in Toronto under the name Teleguide, and were deployed in many shopping centres and at major tourist attractions. The latter city was the North American nexus of NAPLPS and the home of Norpak, the most successful of NAPLPS-oriented developers. Norpak created and sold hardware and software for NAPLPS development and display. TVOntario also developed NAPLPS content creation software. London, Ontario - based Cableshare used NAPLPS as the basis of touch-screen information kiosks for shopping malls, the flagship of which was deployed at Toronto's Eaton Centre. The system relied on an 8085-based microcomputer which drove several NAPLPS terminals fitted with touch screens, all communicating via Datapac to a back end database. The system offered news, weather and sports information along with shopping mall guides and coupons. Cableshare also developed and sold a leading NAPLPS page creation utility called the "Picture Painter." In the late 1980s, Tribune Media Services (TMS) and the Associated Press operated a cable television channel called AP News Plus that provided NAPLPS-based news screens to cable television subscribers in many U.S. cities. The news pages were created and edited by TMS staffers working on an Atex editing system in Orlando, Florida, and sent by satellite to NAPLPS decoder devices located at the local cable television companies. Among the firms providing technology to TMS and the Associated Press for the AP News Plus channel was Minneapolis-based Electronic Publishers Inc. (1985–1988). In 1981, two amateur radio operators (VE3FTT and VE3GQW) received special permission from the Canad
Umple
Umple is a language for both object-oriented programming and modelling with class diagrams and state diagrams. The name Umple is a portmanteau of "UML", "ample" and "Simple", indicating that it is designed to provide ample features to extend programming languages with UML capabilities. == History and philosophy == The design of Umple started in 2008 at the University of Ottawa. Umple was open-sourced and its development was moved to Google Code in early 2011 and to GitHub in 2015. Umple was developed, in part, to address certain problems observed in the modelling community. Most specifically, it was designed to bring modelling and programming into alignment, It was intended to help overcome inhibitions against modelling common in the programmer community. It was also intended to reduce some of the difficulties of model-driven development that arise from the need to use large, expensive or incomplete tools. One design objective is to enable programmers to model in a way they see as natural, by adding modelling constructs to programming languages. == Features and capabilities == Umple can be used to represent in a textual manner many UML modelling entities found in class diagrams and state diagrams. Umple can generate code for these in various programming languages. Currently Umple fully supports Java, C++ and PHP as target programming languages and has functional, but somewhat incomplete support for Ruby. Umple also incorporates various features not related to UML, such as the singleton pattern, keys, immutability, mixins and aspect-oriented code injection. The class diagram notations Umple supports includes classes, interfaces, attributes, associations, generalizations and operations. The code Umple generates for attributes include code in the constructor, 'get' methods and 'set' methods. The generated code differs considerably depending on whether the attribute has properties such as immutability, has a default value, or is part of a key. Umple generates many methods for manipulating, querying and navigating associations. It supports all combinations of UML multiplicity and enforces referential integrity. Umple supports the vast majority of UML state machine notation, including arbitrarily deep nested states, concurrent regions, actions on entry, exit and transition, plus long-lasting activities while in a state. A state machine is treated as an enumerated attribute where the value is controlled by events. Events encoded in the state machine can be methods written by the user, or else generated by the Umple compiler. Events are triggered by calling the method. An event can trigger transitions (subject to guards) in several different state machines. Since a program can be entirely written around one or more state machines, Umple enables automata-based programming. The bodies of methods are written in one of the target programming languages. The same is true for other imperative code such as state machine actions and guards, and code to be injected in an aspect-oriented manner. Such code can be injected before many of the methods in the code Umple generates, for example before or after setting or getting attributes and associations. The Umple notation for UML constructs can be embedded in any of its supported target programming languages. When this is done, Umple can be seen as a pre-processor: The Umple compiler expands the UML constructs into code of the target language. Code in a target language can be passed to the Umple compiler directly; if no Umple-specific notation is found, then the target-language code is emitted unchanged by the Umple compiler. Umple, combined with one of its target languages for imperative code, can be seen and used as a complete programming language. Umple plus Java can therefore be seen as an extension of Java. Alternatively, if imperative code and Umple-specific concepts are left out, Umple can be seen as a way of expressing a large subset of UML in a purely textual manner. Code in one of the supported programming languages can be added in the same manner as UML envisions adding action language code. == License == Umple is licensed under an MIT-style license. == Examples == Here is the classic Hello world program written in Umple (extending Java): This example looks just like Java, because Umple extends other programming languages. With the program saved in a file named HelloWorld.ump, it can be compiled from the command line: $ java -jar umple.jar HelloWorld.ump To run it: $ java HelloWorld The following is a fully executable example showing embedded Java methods and declaration of an association. The following example describes a state machine called status, with states Open, Closing, Closed, Opening and HalfOpen, and with various events that cause transitions from one state to another. class GarageDoor { status { Open { buttonOrObstacle -> Closing; } Closing { buttonOrObstacle -> Opening; reachBottom -> Closed; } Closed { buttonOrObstacle -> Opening; } Opening { buttonOrObstacle -> HalfOpen; reachTop -> Open; } HalfOpen { buttonOrObstacle -> Opening; } } } == Umple use in practice == The first version of the Umple compiler was written in Java, Antlr and Jet (Java Emitter Templates), but in a bootstrapping process, the Java code was converted to Umple following a technique called Umplification. The Antlr and Jet were also later converted to native Umple. Umple is therefore now written entirely in itself, in other words it is self-hosted and serves as its own largest test case. Umple and UmpleOnline have been used in the classroom by several instructors to teach UML and modelling. In one study it was found to help speed up the process of teaching UML, and was also found to improve the grades of students. == Tools == Umple is available as a Jar file so it can be run from the command line, and as an Eclipse plugin. There is also an online tool for Umple called UmpleOnline , which allows a developer to create an Umple system by drawing a UML class diagram, editing Umple code or both. Umple models created with UmpleOnline are stored in the cloud. Currently UmpleOnline only supports Umple programs consisting of a single input file. In addition to code, Umple's tools can generate a variety of other types of output, including user interfaces based on the Umple model.