Frank Hutter is a German computer scientist recognized for his contributions to machine learning, particularly in the areas of automated machine learning (AutoML), hyperparameter optimization, meta-learning and tabular machine learning. He is currently a Hector-Endowed Fellow and PI at the ELLIS Institute Tübingen and a Full Professor (W3) for Machine Learning at the Department of Computer Science, University of Freiburg. Hutter is known for his role in establishing AutoML as a key area in artificial intelligence research. == Education and academic career == Frank Hutter received his academic training in computer science at Darmstadt University of Technology, where he completed his Vordiplom (comparable to a BSc) and Hauptdiplom (equivalent to MSc) by 2004. He later pursued his PhD at the University of British Columbia, under the supervision of Profs. Holger Hoos, Kevin Leyton-Brown and Kevin Murphy, where his doctoral thesis, titled "Automated Configuration of Algorithms for Solving Hard Computational Problems," was awarded the CAIAC Doctoral Dissertation Award for the best thesis in Artificial Intelligence completed at a Canadian university in 2009. Hutter did his postdoctoral research at the University of British Columbia, where he worked from 2009 to 2013. In 2013, he moved to the University of Freiburg, initially leading an Emmy Noether Research Group, and in 2017, he was appointed as a Full Professor. His contributions to machine learning have been recognized globally, particularly his work in AutoML and hyperparameter optimization. Overall, Hutter has authored over 180 peer-reviewed publications, which have garnered more than 89,000 citations, reflecting the high impact of his work. == Contributions in AutoML == Hutter's early research laid the groundwork for the field of Automated Machine Learning (AutoML). He has been a key figure in establishing AutoML as a distinct research area. Along with various colleagues, he organized the AutoML workshops from 2014 to 2021, wrote the first book on AutoML and taught the first MOOC on AutoML. He also co-founded the AutoML conference in 2022 and served as its general chair the first two years. He also published prominent works in various subfields of AutoML, such as hyperparameter optimization, neural architecture search, meta-Learning and AutoML systems. He is currently the most highly cited researcher in AutoML. == Contributions in machine learning for tabular data == Hutter has also made many contributions to machine learning for tabular data. He led the development of the first widely adopted AutoML system for tabular data, AutoWEKA, which was published at KDD 2013 and received the test of time award at KDD (2023). Subsequently, he led the development of Auto-sklearn, the first highly used AutoML system for tabular data in Python, and with it, won the first international AutoML challenge and the subsequent second international AutoML challenge, both of which only included tabular data. More recently, he focused on tabular foundation models, including TabPFN, which was published in Nature magazine. In 2024, he also co-founded Prior Labs, the first company focusing on tabular foundation models. == Awards and honors == Hutter has received numerous awards throughout his career. In 2023, he won the KDD Test of Time Award for Research together with Chris Thornton, Holger H. Hoos, and Kevin Leyton-Brown. He has received three grants from the ERC, including the ERC Starting Grant (2016) and ERC Consolidator Grant (2022), as well as an ERC Proof of Concept Grant (2020). In 2021, he became an ELLIS Unit Director and was also recognized as a EurAI Fellow, in addition to receiving the AIJ Prominent Paper Award. Earlier, he was a recipient of the Google Faculty Research Award in 2018. His groundbreaking research was acknowledged early in his career with the IJCAI Distinguished Paper Award in 2013 and the IJCAI/JAIR Best Paper Prize in 2010. == Representative publications == Hutter, F. Kotthoff, L. and Vanschoren, J., editors. Automated machine learning: methods, systems, challenges, Springer Nature, 2019. www.automl.org/book. Feurer, M., Klein, A., Eggensperger, K., Springenberg, T., Blum, M., Hutter, F. Efficient and Robust Automated Machine Learning. In NeurIPS 2015. Loshchilov, I., and Hutter, F. Decoupled weight decay regularization. In ICLR 2018. Zela, A., Elsken, T. ,Saikia, T. ,Marrakschi, Y. ,Brox, T. and Hutter. ,F.Understanding and Robustifying Differentiable Architecture Search. In ICLR 2020. Hollmann, N., Müller, S., Eggensperger, K. and Hutter, F. TabPFN: A Transformer That Solves Small Tabular Classification Problems in a Second, In ICLR 2023.
Language resource
In linguistics and language technology, a language resource is a "[composition] of linguistic material used in the construction, improvement and/or evaluation of language processing applications, (...) in language and language-mediated research studies and applications." According to Bird & Simons (2003), this includes data, i.e. "any information that documents or describes a language, such as a published monograph, a computer data file, or even a shoebox full of handwritten index cards. The information could range in content from unanalyzed sound recordings to fully transcribed and annotated texts to a complete descriptive grammar", tools, i.e., "computational resources that facilitate creating, viewing, querying, or otherwise using language data", and advice, i.e., "any information about what data sources are reliable, what tools are appropriate in a given situation, what practices to follow when creating new data". The latter aspect is usually referred to as "best practices" or "(community) standards". In a narrower sense, language resource is specifically applied to resources that are available in digital form, and then, "encompassing (a) data sets (textual, multimodal/multimedia and lexical data, grammars, language models, etc.) in machine readable form, and (b) tools/technologies/services used for their processing and management". == Typology == As of May 2020, no widely used standard typology of language resources has been established (current proposals include the LREMap, METASHARE, and, for data, the LLOD classification). Important classes of language resources include data lexical resources, e.g., machine-readable dictionaries, linguistic corpora, i.e., digital collections of natural language data, linguistic data bases such as the Cross-Linguistic Linked Data collection, tools linguistic annotations and tools for creating such annotations in a manual or semiautomated fashion (e.g., tools for annotating interlinear glossed text such as Toolbox and FLEx, or other language documentation tools), applications for search and retrieval over such data (corpus management systems), for automated annotation (part-of-speech tagging, syntactic parsing, semantic parsing, etc.), metadata and vocabularies vocabularies, repositories of linguistic terminology and language metadata, e.g., MetaShare (for language resource metadata), the ISO 12620 data category registry (for linguistic features, data structures and annotations within a language resource), or the Glottolog database (identifiers for language varieties and bibliographical database). == Language resource publication, dissemination and creation == A major concern of the language resource community has been to develop infrastructures and platforms to present, discuss and disseminate language resources. Selected contributions in this regard include: a series of International Conferences on Language Resources and Evaluation (LREC), the European Language Resources Association (ELRA, EU-based), and the Linguistic Data Consortium (LDC, US-based), which represent commercial hosting and dissemination platforms for language resources, the Open Languages Archives Community (OLAC), which provides and aggregates language resource metadata, the Language Resources and Evaluation Journal (LREJ), the European Language Grid is a European platform for language technologies (eg services), data and resources. As for the development of standards and best practices for language resources, these are subject of several community groups and standardization efforts, including ISO Technical Committee 37: Terminology and other language and content resources (ISO/TC 37), developing standards for all aspects of language resources, W3C Community Group Best Practices for Multilingual Linked Open Data (BPMLOD), working on best practice recommendations for publishing language resources as Linked Data or in RDF, W3C Community Group Linked Data for Language Technology (LD4LT), working on linguistic annotations on the web and language resource metadata, W3C Community Group Ontology-Lexica (OntoLex), working on lexical resources, the Open Linguistics working group of the Open Knowledge Foundation, working on conventions for publishing and linking open language resources, developing the Linguistic Linked Open Data cloud, the Text Encoding Initiative (TEI), working on XML-based specifications for language resources and digitally edited text.
VK (service)
VK (short for its original name VKontakte; Russian: ВКонтакте, lit. 'InContact') is a Russian online social media and social networking service based in Saint Petersburg. VK is available in multiple languages but it is predominantly used by Russian speakers. VK users can message each other publicly or privately, edit messages, create groups, public pages, and events; share and tag images, audio, and video; and play browser-based games. As of August 2018, VK had at least 500 million accounts. As of November 2022, it was the sixth most popular website in Russia. The network was also popular in Ukraine until it was banned by the Verkhovna Rada in 2017. According to Semrush, in 2024, VK was the 30th most visited website in the world; as YouTube is subject to blocking in Russia, VK Video overtook Google's top position in monthly web traffic for the first time in December 2024, as part of the major substitution to domestic business. == History == VKontakte was conceived in 2006 when Pavel Durov, creator of the popular student forum spbgu.ru, met his former classmate Vyacheslav Mirilashvili in St. Petersburg after graduating from the Faculty of Philology at St Petersburg State University. Vyacheslav showed Durov the increasingly popular Facebook, after which the friends decided to create a new Russian social network. Lev Leviev, an Israeli classmate of Vyacheslav Mirilashivili, became the third co-founder. Vyacheslav Mirilashvili borrowed the money from his billionaire father and became the largest shareholder. Lev Leviev took over operational management, and Durov became CEO. Pavel Durov convinced his older brother Nikolai, a multiple winner of international math and programming competitions, to develop the site. Durov launched VKontakte for beta testing in September 2006. The following month, the domain name Vkontakte.ru was registered. The new project was incorporated on 19 January 2007 as a Russian private limited company. In February 2007 the site reached a user base of over 100,000 and was recognized as the second largest company in Russia's nascent social network market. In the same month, the site was subjected to a severe DDoS attack, which briefly put it offline. The user base reached 1 million in July 2007, and 10 million in April 2008. In December 2008 VK overtook rival Odnoklassniki as Russia's most popular social networking service. == Website == Similar to many social networks, the platform's fundamental features revolve around private messaging, sharing photos, posting status updates, and exchanging links with friends. VK also provides tools for administering online communities and managing celebrity pages. The site allows its users to upload, search and stream media content, such as videos and music. VK features an advanced search engine, that allows complex queries for finding friends, as well as a real-time news search. VK updated its features and design in April 2016. === Features === Messaging. VK Private Messages can be exchanged between groups of 2 to 500 people. An email address can also be specified as the recipient. Each message may contain up to 10 attachments: Photos, Videos, Audio Files, Maps (an embedded map with a manually placed marker), and Documents. News. VK users can post on their profile walls, each post may contain up to 10 attachments – media files, maps, and documents (see above). User mentions and hashtags are supported. In the case of multiple photo attachments, the previews are automatically scaled and arranged in a magazine-style layout. The news feed can be switched between all news (default) and most interesting modes. The site features a news-recommendation engine, global real-time search, and individual search for posts and comments on specific users' walls. Communities. VK features three types of communities. Groups are better suited for decentralized communities (discussion boards, wiki-style articles, editable by all members, etc.). Public pages is a news feed-orientated broadcasting tool for celebrities and businesses. The two types are largely interchangeable, the main difference being in the default settings. The third type of community is called Events, which are used for appropriately organizing concerts and events in an appropriate way. Like buttons. VK like buttons for posts, comments, media, and external sites operate differently from Facebook. Liked content doesn't get automatically pushed to the user's wall, but is saved in the private Favorites section instead. The user has to press a second 'share with friends' button to share an item on their wall or send it via private message to a friend. Privacy. Users can control the availability of their content within the network and on the Internet. Blanket and granular privacy settings are available for pages and individual content. Synchronization with other social networks. Any news published on the VK wall will appear on Facebook or Twitter. Certain news may not be published by clicking on the logo next to the "Send" button. Editing a post in VK does not change the post in Facebook or Twitter and vice versa. However, removing the news in VK will remove it from other social networks. SMS service. Russian users can receive and reply to a private message or leave a comment for community news using SMS. Music. Users have access to the audio files uploaded by other users. In addition, users can upload the audio files themselves, create playlists and share audios with others by attaching to messages and wall posts. The uploaded audio files cannot violate copyright laws. === Popularity === As of May 2017, according to Alexa Internet ranking, VK is one of the most visited websites in some Eurasian countries. It is: 4th most visited in Russia; 3rd most visited in Belarus; 6th most visited in Kazakhstan; 8th most visited in Kyrgyzstan and Moldova; 12th most visited in Latvia. It was the fourth most viewed site in Ukraine until, in May 2017, the Ukrainian government banned the use of VK in Ukraine. According to a study for May 2018 conducted by Factum Group Ukraine VK remained the fourth most viewed site in Ukraine, but Facebook was twice as much visited. For 2019, VK appeared as the most visited social network in Ukraine according to Alexa. According to the Internet Association of Ukraine the share of Ukrainian Internet users who visit VK daily had fallen from 54% to 10% from September 2016 to September 2019. They also claimed in November 2019 that Facebook was the most popular social network. VK was expected to gain most of the users lost by Facebook and Instagram after they were blocked in Russia in 2022, according to a Calltouch poll. == Ownership == Initially, founder and CEO Pavel Durov owned 20% of shares (although he had majority voting power through proxy votes), and a trio of Russian-Israeli investors Yitzchak Mirilashvili, his father Mikhael Mirilashvili, and Lev Leviev owned 60%, 10%, and 10% respectively. In 2007, Digital Sky Technologies, an investment company managed by Yuri Milner, acquired a total of 24.99% of the shares from shareholders, investing $16.3 million. In preparation for the IPO in September 2010, DST separated international and Russian assets: the former formed the DST Global fund, while the latter, including VKontakte and rival social network Odnoklassniki, were merged into Mail.ru Group. Mail.ru Group used part of the money to acquire 7.5% of the social network for $112.5 million at a valuation of the entire project of 1.5 billion dollars. After exercising a 7.5% option in July 2011 for $111.7 million, Mail.ru Group accumulated a 39.99% stake in VKontakte. The head of Mail.ru Group, Dmitry Grishin, voiced the company's intention to gain 100% control over VKontakte. MRG was discussing with shareholders to buy out shares from the valuation of the entire company in $2-3 billion. In the summer of 2011, Mirilashvili and Leviev were ready to accept in payment owned by Mail.ru Group shares of Facebook, Groupon, and Zynga, but the deal failed due to Durov's unwillingness to sell a stake on MRG terms. Later, the co-founders considered VKontakte's IPO as an alternative. In March 2012, Durov "accidentally" became plugged into the negotiations where Mirilashvili and Leviev discussed selling their stakes directly to Mail.ru Group's main investor, Alisher Usmanov. On the same day, Durov deleted the pages of the first co-investors, stopped contacting them, and soon announced that VKontakte would postpone its IPO indefinitely. On 29 May 2012, Mail.ru Group announced its decision to yield control of the company to Durov by offering him the voting rights on its shares. Combined with Durov's personal 12% stake, this gave him 52% of the votes. In April 2013, the Mirilashvili family sold its 40% share in VK to United Capital Partners for $1.12 billion, while Lev Leviev sold his 8% share in the same deal, giving United Capital Partners 48% ownership. In January 2014, VK's founder Pavel Durov sold his 12% stake in the company to I
Eduroam
eduroam (a portmanteau of education and roaming) is an international Wi-Fi internet access roaming service for users in research, higher education and further education. It provides researchers, teachers, and students network access when visiting an institution other than their own. Users are authenticated with credentials from their home institution, regardless of the location of the eduroam access point. Authorization to access the Internet and other resources are handled by the visited institution. Users do not have to pay to use eduroam. In some countries, Internet access via eduroam is also available at other locations than the participating institutions, e.g. in libraries, public buildings, railway stations, city centres and airports. It is also available at many primary and secondary education institutions in Brazil and the US. == History == The eduroam initiative started in 2002 when during the preparations for the creation of TERENA's task force TF-Mobility, Klaas Wierenga of SURFnet shared the idea of combining a RADIUS-based infrastructure with IEEE 802.1X technology to provide roaming network access across research and education networks. Initially, the service was joined by institutions in the Netherlands, Germany, Finland, Portugal, Croatia and the United Kingdom. Later, other NRENs in Europe embraced the idea and started joining the infrastructure, which was then called eduroam. Since 2004, the European Union co-funded further research and development work related to the eduroam service through the GN2 and GN3 projects. From September 2007, the European Union also funded through these projects the continued operation and maintenance of the eduroam service at the European level. The first non-European country to join eduroam was Australia, in December 2004. In Canada, eduroam started as an initiative of the University of British Columbia, which was later taken over by CANARIE as a service of its Canadian Access Federation. In the United States, eduroam was initially a pilot project between the National Science Foundation and the University of Tennessee (UTK). In 2012, Internet2 announced the addition of eduroam to its NET+ service offerings. AnyRoam LLC, a private company, was formed by former UTK staff to serve as an Internet2 active corporate member administering the US top-level servers. In 2021, Internet2 assumed direct management of the eduroam service for US-based organizations. == Technology == The eduroam service uses IEEE 802.1X as the authentication method and a hierarchical system of RADIUS servers. The hierarchy typically consists of RADIUS servers at the participating institutions, national RADIUS servers run by the National Roaming Operators, and regional top-level RADIUS servers for individual world regions. In some cases, institutions contact each other directly via DNS lookups () When a user visits a remote institution, the user's device presents their credentials to the local RADIUS server. That RADIUS server discovers that it is not responsible for the realm of the user's home institution and proxies the access request to another RADIUS server, typically the national RADIUS server. If the visited institution is in a different country than the home institution, the request is in turn proxied to the regional top-level RADIUS server, and then to the national RADIUS server of the user's home country. That national server forwards the credentials to the home institution, where they are verified. The RADIUS response travels back over the proxy-hierarchy to the visited institution and the user is granted access. In eduroam, the user credentials are always presented in the form of an EAP method (). The EAP method is responsible for ensuring that the users credentials are secure, and private. The users credentials can then travel via a number of intermediate servers, not under the control of the home institution of the user. This requirement limits the types of EAP methods that can be used. EAP methods which do not provide for security or privacy of user credentials cannot be used in eduroam. The most commonly used EAP methods in eduroam are EAP-TLS, PEAP, and EAP-TTLS. The methods used generally fall into two broad categories: those that use credentials in the form of some public-key mechanism with certificates and those that use so-called tunnelled authentication with "inner" passwords or other credentials. Most institutions use a tunnelled authentication method that requires a server certificate. These server certificates are used to set up a secure tunnel between the mobile device and the authentication server, through which the user credentials (e.g. name and password) are securely transported. A complication arises if the user's home institution does not use a two-letter country-code top-level domain as part of its realm, but a generic top-level domain such as .edu or .org. By inspection of such realms, it is not possible to determine which national RADIUS server the request should be routed to. Such domains will thus, by default, fail to work in international roaming. The workaround for this problem involves the creation of exceptions in the international RADIUS request routing tables; however, this workaround does not scale as the number of exception entries grows. Several solutions have been proposed to eliminate this workaround in the future, the most promising of which is RADIUS over TLS with Dynamic Discovery, which does not rely on static routing tables inside a RADIUS server configuration to route requests to their proper destination. Instead, the participating institution adds one NAPTR DNS resource record to its own domain's DNS zone, which states by which server eduroam authentication for the domain is handled. == Governance == GÉANT has established a lightweight global governance structure. Recognising the large variety in the organisation and funding of research and education (networking) in different countries and regions, rules imposed on the operations of eduroam are limited to technical and administrative requirements that are necessary to ensure the smooth and secure operations of eduroam worldwide. Moreover, the eduroam operators have the leading role in creating and maintaining the rules of the global eduroam governance. The Global eduroam Governance Committee (GeGC) has the central role in the global eduroam governance structure. While its structure has evolved over time, it presently has three representatives from each of five regions — mirroring those used by the Regional Internet registries — serving a two-year term. In addition, GÉANT may appoint one or more experts as non-voting members of the GeGC. == Geographical deployment == eduroam is available at selected locations in countries with a National Roaming Operator that has signed the eduroam Compliance Statement. Those sixty-seven countries are listed below. In addition, there may be pilot deployments in countries that are in the process of joining eduroam. === Middle East === eduroam is deployed in: === Europe === The NRENs that are members of the consortium of the GN3 project have joined the European eduroam confederation by signing the confederation's policy that requires its members to comply with a set of technical and organisational requirements, which are more specific than those in the global eduroam Compliance Statement. As a consequence, eduroam is deployed in the following countries: In addition, three NRENs that are associate members of the consortium of the GN3 project without voting rights joined the European eduroam confederation; they represent Belarus (UIIP), Moldova (RENAM) and Russia (Joint Supercomputer Center of the Russian Academy of Sciences). Finally, five NRENs not involved in the GN3 project joined the European eduroam confederation on a voluntary basis, enabling the deployment of the service in: The European top-level RADIUS servers are operated by SURFnet and Forskningsnettet. === Asia-Pacific === eduroam is deployed in the following countries and economies: The Asia-Pacific top-level RADIUS servers are operated by AARNet and by the University of Hong Kong. === North America === eduroam is deployed in: === Latin America === eduroam is deployed in: === Africa === eduroam is deployed in: The inter-African RADIUS servers are operated by West-African research and education network WACREN, the UbuntuNet Alliance and TENET.
Content-oriented workflow models
In data management, a content-oriented workflow model seeks to articulate workflow progression by the presence of content units (like data-records/objects/documents). Most content-oriented workflow approaches provide a life-cycle model for content units, such that workflow progression can be qualified by conditions on the state of the units. Most approaches are research and work in progress and the content models and life-cycle models are more or less formalized. The term content-oriented workflows is an umbrella term for several scientific workflow approaches, namely "data-driven", "resource-driven", "artifact-centric", "object-aware", and "document-oriented". Thus, the meaning of "content" ranges from simple data attributes to self-contained documents; the term "content-oriented workflows" appeared at first in as an umbrella term. Such a general term, independent from a specific approach, is necessary to contrast the content-oriented modelling principle with traditional activity-oriented workflow models (like Petri nets or BPMN) where a workflow is driven by a control flow and where the content production perspective is neglected or even missing. The term "content" was chosen to subsume the different levels in granularity of the content units in the respective workflow models; it was also chosen to make associations with content management. Both terms "artifact-centric" and "data-driven" would also be good candidates for an umbrella term, but each is closely related to a specific approach of a single working group. The "artifact-centric" group itself (i.e. IBM Research) has generalized the characteristics of their approach and has used "information-centric" as an umbrella term in. Yet, the term information is too unspecific in the context of computer science, thus, "content-orientated workflows" is considered as good compromise. == Workflow Model Approaches == === Data-driven === The data-driven process structures provides a sophisticated workflow model being specialized on hierarchical write-and-review-processes. The approach provides interleaved synchronization of sub-processes and extends activity diagrams. Unfortunately, the COREPRO prototype implementation is not publicly available. Research on the project had been ceased. The general idea has been continued by Reichert in form of the #Object-aware approach. Synonyms data-driven process structures / data-driven modeling and coordination Protagonists Dr. Dominic Müller (University of Twente), Joachim Herbst (DaimlerChrysler Research), and Manfred Reichert (at this time Assoc. Prof. at Univ. of Twente, currently Prof. at Ulm Univ.) Organization(s) University of Twente, DaimlerChrysler Period 2005 - 2007 Selected publications Implementation COREPRO === Resource-driven === The resource-driven workflow system is an early approach that considered workflows from a content-oriented perspective and emphasizes on the missing support for plain document-driven processes by traditional activity-oriented workflow engines. The resource-driven approach demonstrated the application of database triggers for handling workflow events. Still the system implementation is centralized and the workflow schema is statically defined. The project appeared in 2005 but many aspects are considered future work by the authors. Research did not continue on the project. Wang completed his PhD thesis in 2009, yet, his thesis does not mention the resource-driven approach to workflow modelling but is about discrete event simulation. Synonyms Resource-based Workflows / Document-Driven Workflow Systems Protagonists Jianrui Wang and Prof. Akhil Kumar Organization Pennsylvania State University Period 2005 - today Selected publications Implementation N/A === Artifact-centric === The artifact-centric approach provides a framework for content-oriented workflows. In this model, the enterprise application landscape includes distributed business services, while the workflow engine is centralized. Process enactment is integrated with database management system infrastructure, and the project is funded by IBM. Synonyms artifact-centric business process models / artifact-based business process (ACP) / artifact-centric workflows Protagonists Richard Hull and Dr. Kamal Bhattacharya as well as Cagdas E. Gerede and Jianwen Su Organization IBM (T.J. Watson Research Center, NY) Period 2007 - today Selected publications Implementation ArtiFact === Object-aware === The object-aware approach manages a set of object types and generates forms for creating object instances. The form completion flow is controlled by transitions between object configurations each describing a progressing set of mandatory attributes. Each object configuration is named by an object state. The data production flow is user-shifting and it is discrete by defining a sequence of object states. The discussion is currently limited to a centralized system, without any workflows across different organizations. However, the approach is of great relevance to many domains like concurrent engineering. Finally, the object-aware approach and its PHILharmonicFlows system are going to provide general-purpose workflow systems for generic enactment of data production processes. Synonyms object-aware process management / datenorientiertes Prozess-Management-System Protagonists Vera Künzle and Prof. Manfred Reichert Organization Ulm University Period 2009 - today Selected publications Implementation PHILharmonicFlows === Distributed Document-oriented === Distributed document-oriented process management (dDPM) enables distributed case handling in heterogeneous system environments and it is based on document-oriented integration. The workflow model reflects the paper-based working practice in inter-institutional healthcare scenarios. It targets distributed knowledge-driven ad hoc workflows, wherein distributed information systems are required to coordinate work with initially unknown sets of actors and activities. The distributed workflow engine supports process planning & process history as well as participant management and process template creation with import/export. The workflow engine embeds a functional fusion of 1) group-based instant messaging 2) with a shared work list editor 3) with version control. The software implementation of dDPM is α-Flow which is available as open source. dDPM and α-Flow provide a content-oriented approach to schema-less workflows. The complete distributed case handling application is provided in form of a single active Document ("α-Doc"). The α-Doc is a case file (as information carrier) with an embedded workflow engine (in form of active properties). Inviting process participants is equivalent to providing them with a copy of an α-Doc, copying it like an ordinary desktop file. All α-Docs that belong to the same case can synchronize each other, based on the participant management, electronic postboxes, store-and-forward messaging, and an offline-capable synchronization protocol. Synonyms distributed document-oriented process management (dDPM), distributed case handling via active documents Protagonists Christoph P. Neumann and Prof. Richard Lenz Organization Friedrich-Alexander-Universität Erlangen-Nürnberg Period 2009 - 2012 Selected Publications and a PhD thesis Implementation α-Flow (open source) == Related Concepts == === Content Management === The bandwidth of Content management systems (CMS) reaches from Web content management systems (WCMS) and Document management system (DMS) to Enterprise Content Management (ECM). Mature DMS products support document production workflows in a basic form, primarily focusing on review cycle workflows concerning a single document. === Groupware and Computer-Supported Cooperative Work === Groupware focuses on messaging (like E-Mail, Chat, and Instant Messaging), shared calendars (e.g. Lotus Notes, Microsoft Outlook with Exchange Server), and conferencing (e.g. Skype). Groupware overlaps with Computer-supported cooperative work (CSCW), that originated from shared multimedia editors (for live drawing/sketching) and synchronous multi-user applications like desktop sharing. The extensive conceptual claim of CSWC must be put into perspective by its actual solution scope, that is available as the CSCW Matrix. === Case Handling === The case handling paradigm stems from Prof. van der Aalst and gained momentum in 2005. The core features are: (a) provide all information available, i.e. present the case as a whole rather than showing bits and pieces, (b) decide about activities on the basis of the information available rather than the activities already executed, (c) separate work distribution from authorization and allow for additional types of roles, not just the execute role, and (d) allow workers to view and add/modify data before or after the corresponding activities have been executed. In healthcare, the flow of a patient between healthcare professionals is considered as a workflow - with activities that inc
Large language model
A large language model (LLM) is a neural network trained on a vast amount of text for natural language processing tasks, especially language generation. LLMs can typically generate, summarize, translate and analyze text in many contexts, and are a foundational technology behind modern chatbots. Biased or inaccurate training data can make an LLM's output less reliable. As of 2026, the most capable LLMs are based on transformer architectures, which, according to the 2017 paper "Attention Is All You Need", can be more efficient and parallelizable than earlier statistical and recurrent neural network models. Benchmark evaluations for LLMs attempt to measure model reasoning, factual accuracy, alignment, and safety. == History == Before the emergence of transformer-based models in 2017, some language models were considered large relative to the computational and data constraints of their time. In the early 1990s, IBM's statistical models pioneered word alignment techniques for machine translation, laying the groundwork for corpus-based language modeling. In 2001, a smoothed n-gram model, such as those employing Kneser–Ney smoothing, trained on 300 million words, achieved state-of-the-art perplexity on benchmark tests. During the 2000s, with the rise of widespread internet access, researchers began compiling massive text datasets from the web ("web as corpus") to train statistical language models. Moving beyond n-gram models, researchers started in 2000 to use neural networks as language models. Following the breakthrough of deep neural networks in image classification around 2012, similar architectures were adapted for language tasks. This shift was marked by the development of word embeddings (e.g., Word2Vec by Mikolov in 2013) and sequence-to-sequence (seq2seq) models using LSTM. In 2016, Google transitioned its translation service to neural machine translation (NMT), replacing statistical phrase-based models with deep recurrent neural networks. These early NMT systems used LSTM-based encoder-decoder architectures, as they preceded the invention of transformers. At the 2017 NeurIPS conference, Google researchers introduced the transformer architecture in their landmark paper "Attention Is All You Need". This paper's goal was to improve upon 2014 seq2seq technology, and was based mainly on the attention mechanism developed by Bahdanau et al. in 2014. The following year in 2018, BERT was introduced and quickly became "ubiquitous". Though the original transformer has both encoder and decoder blocks, BERT is an encoder-only model. Academic and research usage of BERT began to decline in 2023, following rapid improvements in the abilities of decoder-only models (such as GPT) to solve tasks via prompting. Although decoder-only GPT-1 was introduced in 2018, it was GPT-2 in 2019 that caught widespread attention because OpenAI claimed to have initially deemed it too powerful to release publicly, out of fear of malicious use. GPT-3 in 2020 went a step further and as of 2025 is available only via API with no offering of downloading the model to execute locally. But it was the consumer-facing chatbot ChatGPT in late 2022 that received extensive media coverage and public attention by 2023. The 2023 GPT-4 was praised for its increased accuracy and as a "holy grail" for its multimodal capabilities. OpenAI did not reveal the high-level architecture and the number of parameters of GPT-4. The release of ChatGPT led to an uptick in LLM usage across several research subfields of computer science, including robotics, software engineering, and societal impact work. In 2024, OpenAI released the reasoning model OpenAI o1, which generates long chains of thought before returning a final answer. Many LLMs with parameter counts comparable to those of OpenAI's GPT series have been developed. Since 2022, weights-available models have been gaining popularity, especially at first with BLOOM and LLaMA, though both have restrictions on usage and deployment. Mistral AI's open-weight models Mistral 7B and Mixtral 8x7B have a more permissive Apache License. In January 2025, DeepSeek released DeepSeek R1, a 671-billion-parameter open-weight model that performs comparably to OpenAI o1 but at a much lower price per token for users. Since 2023, many LLMs have been trained to be multimodal, having the ability to also process or generate other types of data, such as images, audio, or 3D meshes. Open-weight LLMs have become more influential since 2023. Per Vake et al. (2025), community-driven contributions to open-weight models improve their efficiency and performance via collaborative platforms such as Hugging Face. == Dataset preprocessing == === Tokenization === As machine learning algorithms process numbers rather than text, the text must be converted to numbers. In the first step, a vocabulary is decided upon, then integer indices are arbitrarily but uniquely assigned to each vocabulary entry, and finally, an embedding is associated with the integer index. Algorithms include byte-pair encoding (BPE) and WordPiece. There are also special tokens serving as control characters, such as [MASK] for masked-out token (as used in BERT), and [UNK] ("unknown") for characters not appearing in the vocabulary. Also, some special symbols are used to denote special text formatting. For example, "Ġ" denotes a preceding whitespace in RoBERTa and GPT and "##" denotes continuation of a preceding word in BERT. For example, the BPE tokenizer used by the legacy version of GPT-3 would split tokenizer: texts -> series of numerical "tokens" as Tokenization also compresses the datasets. Because LLMs generally require input to be an array that is not jagged, the shorter texts must be "padded" until they match the length of the longest one. ==== Byte-pair encoding ==== As an example, consider a tokenizer based on byte-pair encoding. In the first step, all unique characters (including blanks and punctuation marks) are treated as an initial set of n-grams (i.e. initial set of uni-grams). Successively the most frequent pair of adjacent characters is merged into a bi-gram and all instances of the pair are replaced by it. All occurrences of adjacent pairs of (previously merged) n-grams that most frequently occur together are then again merged into even lengthier n-gram, until a vocabulary of prescribed size is obtained. After a tokenizer is trained, any text can be tokenized by it, as long as it does not contain characters not appearing in the initial-set of uni-grams. === Dataset cleaning === In the context of training LLMs, datasets are typically cleaned by removing low-quality, duplicated, or toxic data. Cleaned datasets can increase training efficiency and lead to improved downstream performance. A trained LLM can be used to clean datasets for training a further LLM. With the increasing proportion of LLM-generated content on the web, data cleaning in the future may include filtering out such content. LLM-generated content can pose a problem if the content is similar to human text (making filtering difficult) but of lower quality (degrading performance of models trained on it). === Synthetic data === Training of largest language models might need more linguistic data than naturally available, or that the naturally occurring data is of insufficient quality. In these cases, synthetic data might be used. == Training == An LLM is a type of foundation model (large X model) trained on language. LLMs can be trained in different ways. In particular, GPT models are first pretrained to predict the next word on a large amount of data, before being fine-tuned. === Cost === Substantial infrastructure is necessary for training the largest models. The tendency towards larger models is visible in the list of large language models. For example, the training of GPT-2 (i.e. a 1.5-billion-parameter model) in 2019 cost $50,000, while training of the PaLM (i.e. a 540-billion-parameter model) in 2022 cost $8 million, and Megatron-Turing NLG 530B (in 2021) cost around $11 million. The qualifier "large" in "large language model" is inherently vague, as there is no definitive threshold for the number of parameters required to qualify as "large". === Fine-tuning === Before being fine-tuned, most LLMs are next-token predictors. The fine-tuning shapes the LLM's behavior via techniques like reinforcement learning from human feedback (RLHF) or constitutional AI. Instruction fine-tuning is a form of supervised learning used to teach LLMs to follow user instructions. In 2022, OpenAI demonstrated InstructGPT, a version of GPT-3 similarly fine-tuned to follow instructions. Reinforcement learning from human feedback (RLHF) involves training a reward model to predict which text humans prefer. Then, the LLM can be fine-tuned through reinforcement learning to better satisfy this reward model. Since humans typically prefer truthful, helpful and harmless answers, RLHF favors such answers. == Architecture == LLMs are generally based on the tra
Locally recoverable code
Locally recoverable codes are a family of error correction codes that were introduced first by D. S. Papailiopoulos and A. G. Dimakis and have been widely studied in information theory due to their applications related to distributive and cloud storage systems. An [ n , k , d , r ] q {\displaystyle [n,k,d,r]_{q}} LRC is an [ n , k , d ] q {\displaystyle [n,k,d]_{q}} linear code such that there is a function f i {\displaystyle f_{i}} that takes as input i {\displaystyle i} and a set of r {\displaystyle r} other coordinates of a codeword c = ( c 1 , … , c n ) ∈ C {\displaystyle c=(c_{1},\ldots ,c_{n})\in C} different from c i {\displaystyle c_{i}} , and outputs c i {\displaystyle c_{i}} . == Overview == Erasure-correcting codes, or simply erasure codes, for distributed and cloud storage systems, are becoming more and more popular as a result of the present spike in demand for cloud computing and storage services. This has inspired researchers in the fields of information and coding theory to investigate new facets of codes that are specifically suited for use with storage systems. It is well-known that LRC is a code that needs only a limited set of other symbols to be accessed in order to restore every symbol in a codeword. This idea is very important for distributed and cloud storage systems since the most common error case is when one storage node fails (erasure). The main objective is to recover as much data as possible from the fewest additional storage nodes in order to restore the node. Hence, Locally Recoverable Codes are crucial for such systems. The following definition of the LRC follows from the description above: an [ n , k , r ] {\displaystyle [n,k,r]} -Locally Recoverable Code (LRC) of length n {\displaystyle n} is a code that produces an n {\displaystyle n} -symbol codeword from k {\displaystyle k} information symbols, and for any symbol of the codeword, there exist at most r {\displaystyle r} other symbols such that the value of the symbol can be recovered from them. The locality parameter satisfies 1 ≤ r ≤ k {\displaystyle 1\leq r\leq k} because the entire codeword can be found by accessing k {\displaystyle k} symbols other than the erased symbol. Furthermore, Locally Recoverable Codes, having the minimum distance d {\displaystyle d} , can recover d − 1 {\displaystyle d-1} erasures. == Definition == Let C {\displaystyle C} be a [ n , k , d ] q {\displaystyle [n,k,d]_{q}} linear code. For i ∈ { 1 , … , n } {\displaystyle i\in \{1,\ldots ,n\}} , let us denote by r i {\displaystyle r_{i}} the minimum number of other coordinates we have to look at to recover an erasure in coordinate i {\displaystyle i} . The number r i {\displaystyle r_{i}} is said to be the locality of the i {\displaystyle i} -th coordinate of the code. The locality of the code is defined as An [ n , k , d , r ] q {\displaystyle [n,k,d,r]_{q}} locally recoverable code (LRC) is an [ n , k , d ] q {\displaystyle [n,k,d]_{q}} linear code C ∈ F q n {\displaystyle C\in \mathbb {F} _{q}^{n}} with locality r {\displaystyle r} . Let C {\displaystyle C} be an [ n , k , d ] q {\displaystyle [n,k,d]_{q}} -locally recoverable code. Then an erased component can be recovered linearly, i.e. for every i ∈ { 1 , … , n } {\displaystyle i\in \{1,\ldots ,n\}} , the space of linear equations of the code contains elements of the form x i = f ( x i 1 , … , x i r ) {\displaystyle x_{i}=f(x_{i_{1}},\ldots ,x_{i_{r}})} , where i j ≠ i {\displaystyle i_{j}\neq i} . == Optimal locally recoverable codes == Theorem Let n = ( r + 1 ) s {\displaystyle n=(r+1)s} and let C {\displaystyle C} be an [ n , k , d ] q {\displaystyle [n,k,d]_{q}} -locally recoverable code having s {\displaystyle s} disjoint locality sets of size r + 1 {\displaystyle r+1} . Then An [ n , k , d , r ] q {\displaystyle [n,k,d,r]_{q}} -LRC C {\displaystyle C} is said to be optimal if the minimum distance of C {\displaystyle C} satisfies == Tamo–Barg codes == Let f ∈ F q [ x ] {\displaystyle f\in \mathbb {F} _{q}[x]} be a polynomial and let ℓ {\displaystyle \ell } be a positive integer. Then f {\displaystyle f} is said to be ( r {\displaystyle r} , ℓ {\displaystyle \ell } )-good if • f {\displaystyle f} has degree r + 1 {\displaystyle r+1} , • there exist distinct subsets A 1 , … , A ℓ {\displaystyle A_{1},\ldots ,A_{\ell }} of F q {\displaystyle \mathbb {F} _{q}} such that – for any i ∈ { 1 , … , ℓ } {\displaystyle i\in \{1,\ldots ,\ell \}} , f ( A i ) = { t i } {\displaystyle f(A_{i})=\{t_{i}\}} for some t i ∈ F q {\displaystyle t_{i}\in \mathbb {F} _{q}} , i.e., f {\displaystyle f} is constant on A i {\displaystyle A_{i}} , – # A i = r + 1 {\displaystyle \#A_{i}=r+1} , – A i ∩ A j = ∅ {\displaystyle A_{i}\cap A_{j}=\varnothing } for any i ≠ j {\displaystyle i\neq j} . We say that { A 1 , … , A ℓ {\displaystyle A_{1},\ldots ,A_{\ell }} } is a splitting covering for f {\displaystyle f} . === Tamo–Barg construction === The Tamo–Barg construction utilizes good polynomials. • Suppose that a ( r , ℓ ) {\displaystyle (r,\ell )} -good polynomial f ( x ) {\displaystyle f(x)} over F q {\displaystyle \mathbb {F} _{q}} is given with splitting covering i ∈ { 1 , … , ℓ } {\displaystyle i\in \{1,\ldots ,\ell \}} . • Let s ≤ ℓ − 1 {\displaystyle s\leq \ell -1} be a positive integer. • Consider the following F q {\displaystyle \mathbb {F} _{q}} -vector space of polynomials V = { ∑ i = 0 s g i ( x ) f ( x ) i : deg ( g i ( x ) ) ≤ deg ( f ( x ) ) − 2 } . {\displaystyle V=\left\{\sum _{i=0}^{s}g_{i}(x)f(x)^{i}:\deg(g_{i}(x))\leq \deg(f(x))-2\right\}.} • Let T = ⋃ i = 1 ℓ A i {\textstyle T=\bigcup _{i=1}^{\ell }A_{i}} . • The code { ev T ( g ) : g ∈ V } {\displaystyle \{\operatorname {ev} _{T}(g):g\in V\}} is an ( ( r + 1 ) ℓ , ( s + 1 ) r , d , r ) {\displaystyle ((r+1)\ell ,(s+1)r,d,r)} -optimal locally coverable code, where ev T {\displaystyle \operatorname {ev} _{T}} denotes evaluation of g {\displaystyle g} at all points in the set T {\displaystyle T} . === Parameters of Tamo–Barg codes === • Length. The length is the number of evaluation points. Because the sets A i {\displaystyle A_{i}} are disjoint for i ∈ { 1 , … , ℓ } {\displaystyle i\in \{1,\ldots ,\ell \}} , the length of the code is | T | = ( r + 1 ) ℓ {\displaystyle |T|=(r+1)\ell } . • Dimension. The dimension of the code is ( s + 1 ) r {\displaystyle (s+1)r} , for s {\displaystyle s} ≤ ℓ − 1 {\displaystyle \ell -1} , as each g i {\displaystyle g_{i}} has degree at most deg ( f ( x ) ) − 2 {\displaystyle \deg(f(x))-2} , covering a vector space of dimension deg ( f ( x ) ) − 1 = r {\displaystyle \deg(f(x))-1=r} , and by the construction of V {\displaystyle V} , there are s + 1 {\displaystyle s+1} distinct g i {\displaystyle g_{i}} . • Distance. The distance is given by the fact that V ⊆ F q [ x ] ≤ k {\displaystyle V\subseteq \mathbb {F} _{q}[x]_{\leq k}} , where k = r + 1 − 2 + s ( r + 1 ) {\displaystyle k=r+1-2+s(r+1)} , and the obtained code is the Reed-Solomon code of degree at most k {\displaystyle k} , so the minimum distance equals ( r + 1 ) ℓ − ( ( r + 1 ) − 2 + s ( r + 1 ) ) {\displaystyle (r+1)\ell -((r+1)-2+s(r+1))} . • Locality. After the erasure of the single component, the evaluation at a i ∈ A i {\displaystyle a_{i}\in A_{i}} , where | A i | = r + 1 {\displaystyle |A_{i}|=r+1} , is unknown, but the evaluations for all other a ∈ A i {\displaystyle a\in A_{i}} are known, so at most r {\displaystyle r} evaluations are needed to uniquely determine the erased component, which gives us the locality of r {\displaystyle r} . To see this, g {\displaystyle g} restricted to A j {\displaystyle A_{j}} can be described by a polynomial h {\displaystyle h} of degree at most deg ( f ( x ) ) − 2 = r + 1 − 2 = r − 1 {\displaystyle \deg(f(x))-2=r+1-2=r-1} thanks to the form of the elements in V {\displaystyle V} (i.e., thanks to the fact that f {\displaystyle f} is constant on A j {\displaystyle A_{j}} , and the g i {\displaystyle g_{i}} 's have degree at most deg ( f ( x ) ) − 2 {\displaystyle \deg(f(x))-2} ). On the other hand | A j ∖ { a j } | = r {\displaystyle |A_{j}\backslash \{a_{j}\}|=r} , and r {\displaystyle r} evaluations uniquely determine a polynomial of degree r − 1 {\displaystyle r-1} . Therefore h {\displaystyle h} can be constructed and evaluated at a j {\displaystyle a_{j}} to recover g ( a j ) {\displaystyle g(a_{j})} . === Example of Tamo–Barg construction === We will use x 5 ∈ F 41 [ x ] {\displaystyle x^{5}\in \mathbb {F} _{41}[x]} to construct [ 15 , 8 , 6 , 4 ] {\displaystyle [15,8,6,4]} -LRC. Notice that the degree of this polynomial is 5, and it is constant on A i {\displaystyle A_{i}} for i ∈ { 1 , … , 8 } {\displaystyle i\in \{1,\ldots ,8\}} , where A 1 = { 1 , 10 , 16 , 18 , 37 } {\displaystyle A_{1}=\{1,10,16,18,37\}} , A 2 = 2 A 1 {\displaystyle A_{2}=2A_{1}} , A 3 = 3 A 1 {\displaystyle A_{3}=3A_{1}} , A 4 = 4 A 1 {\displaystyle A_{4}=4A_{1}} , A 5 = 5 A 1 {\displaystyle A_{5}=5A_{1}} , A 6 = 6 A 1 {\displaystyle A_{6}=6A_{1}}