In information science and information technology, single source of truth (SSOT) architecture, or single point of truth (SPOT) architecture, for information systems is the practice of structuring information models and associated data schemas such that every data element is mastered (or edited) in only one place, providing data normalization to a canonical form (for example, in database normalization or content transclusion). There are several scenarios with respect to copies and updates: The master data is never copied and instead only references to it are made; this means that all reads and updates go directly to the SSOT. The master data is copied but the copies are only read and only the master data is updated; if requests to read data are only made on copies, this is an instance of CQRS. The master data is copied and the copies are updated; this needs a reconciliation mechanism when there are concurrent updates. Updates on copies can be thrown out whenever a concurrent update is made on the master, so they are not considered fully committed until propagated to the master. (many blockchains work that way.) Concurrent updates are merged. (if an automatic merge fails, it could fall back on another strategy, which could be the previous strategy or something else like manual intervention, which most source version control systems do.) The advantages of SSOT architectures include easier prevention of mistaken inconsistencies (such as a duplicate value/copy somewhere being forgotten), and greatly simplified version control. Without a SSOT, dealing with inconsistencies implies either complex and error-prone consensus algorithms, or using a simpler architecture that's liable to lose data in the face of inconsistency (the latter may seem unacceptable but it is sometimes a very good choice; it is how most blockchains operate: a transaction is actually final only if it was included in the next block that is mined). Ideally, SSOT systems provide data that are authentic (and authenticatable), relevant, and referable. Deployment of an SSOT architecture is becoming increasingly important in enterprise settings where incorrectly linked duplicate or de-normalized data elements (a direct consequence of intentional or unintentional denormalization of any explicit data model) pose a risk for retrieval of outdated, and therefore incorrect, information. Common examples (i.e., example classes of implementation) are as follows: In electronic health records (EHRs), it is imperative to accurately validate patient identity against a single referential repository, which serves as the SSOT. Duplicate representations of data within the enterprise would be implemented by the use of pointers rather than duplicate database tables, rows, or cells. This ensures that data updates to elements in the authoritative location are comprehensively distributed to all federated database constituencies in the larger overall enterprise architecture. EHRs are an excellent class for exemplifying how SSOT architecture is both poignantly necessary and challenging to achieve: it is challenging because inter-organization health information exchange is inherently a cybersecurity competence hurdle, and nonetheless it is necessary, to prevent medical errors, to prevent the wasted costs of inefficiency (such as duplicated work or rework), and to make the primary care and medical home concepts feasible (to achieve competent care transitions). Single-source publishing as a general principle or ideal in content management relies on having SSOTs, via transclusion or (otherwise, at least) substitution. Substitution happens via libraries of objects that can be propagated as static copies which are later refreshed when necessary (that is, when refreshing of the copy-paste or import is triggered by a larger updating event). Component content management systems are a class of content management systems that aim to provide competence on this level. == Implementation == === Ontologic interactions === An acknowledged prerequisite (of the notion that any given single source of truth can exist) is that it depends on the ontologic condition that no more than a single truth (about any particular fact or idea) exists, an assertion that is ontologic in both the IT sense and the general sense of that word. In many instances, this presents no problem (for example, within particular namespaces, or even across them, as long as naming collisions or broader name conflicts are adequately handled). The broadest contexts (and thus thorniest, regarding ontologic discrepancies) require adequate epistemic regime comparison and reconciliation (or at least negotiation or transactional exchanges). An archetypal example of this class of reconciliation is that two theological seminary libraries, from two different religions (X and Y), could exchange information with an SSOT architecture, but the unification of truth would reside on the level of the statement that "religion X asserts that God is purple whereas religion Y asserts that God is green", rather than on the level of "God is purple" or "God is green". === Architectures or architectural features === An ideal implementation of SSOT is rarely possible in most enterprises. This is because many organisations have multiple information systems, each of which needs access to data relating to the same entities (e.g., customer). Often these systems are purchased as commercial off-the-shelf products from vendors and cannot be modified in trivial ways. Each of these various systems therefore needs to store its own version of common data or entities, and therefore each system must retain its own copy of a record (hence immediately violating the SSOT approach defined above). For example, an enterprise resource planning (ERP) system (such as SAP or Oracle e-Business Suite) may store a customer record; the customer relationship management (CRM) system also needs a copy of the customer record (or part of it) and the warehouse dispatch system might also need a copy of some or all of the customer data (e.g., shipping address). In cases where vendors do not support such modifications, it is not always possible to replace these records with pointers to the SSOT. For organisations (with more than one information system) wishing to implement a Single Source of Truth (without modifying all but one master system to store pointers to other systems for all entities), some supporting architectures are: Master data management (MDM) Event store and event sourcing (ES) ==== Master data management (MDM) ==== A master data management system typically serves as the source of truth for an organization's metadata, helping to ensure accuracy and consistency throughout that organizations multiple data sources. Typically the MDM acts as a hub for multiple systems, many of which could allow (be the source of truth for) updates to different aspects of information on a given entity. For example, the CRM system may be the "source of truth" for most aspects of the customer, and is updated by a call centre operator. However, a customer may (for example) also update their address via a customer service web site, with a different back-end database from the CRM system. The MDM application receives updates from multiple sources, acts as a broker to determine which updates are to be regarded as authoritative (the golden record) and then syndicates this updated data to all subscribing systems. The MDM application normally requires an ESB to syndicate its data to multiple subscribing systems. ==== Event store and event sourcing (ES) ==== In event oriented architectures, it has become increasingly common to find an implementation of the Event Sourcing pattern which stores the system state as an ordered sequence of state changes. To do this, you need an Event Store, a particular type of database designed to hold all the events that change the state of the system. The event store in an Event Sourcing + Command Query Responsibility Separation + Domain Driven Design + Messaging architecture is in fact a "single source of truth", with the additional advantage that it can also act as an Enterprise Service Bus as it can listen directly to the event store for status changes as everything passes by. In addition, by saving all the events, it also plays the role of Data Warehouse. One last advantage is that through this system the Shared Database pattern can be implemented, another technique not mentioned to obtain a single source of truth. ==== Data warehouse (DW) ==== While the primary purpose of a data warehouse is to support reporting and analysis of data that has been combined from multiple sources, the fact that such data has been combined (according to business logic embedded in the data transformation and integration processes) means that the data warehouse is often used as a de facto SSOT. Generally, however, the data available from the data warehouse are not used to update other systems; rather the DW becomes
Smart object
A smart object is an object that enhances the interaction with not only people but also with other smart objects. Also known as smart connected products or smart connected things (SCoT), they are products, assets and other things embedded with processors, sensors, software and connectivity that allow data to be exchanged between the product and its environment, manufacturer, operator/user, and other products and systems. Connectivity also enables some capabilities of the product to exist outside the physical device, in what is known as the product cloud. The data collected from these products can be then analysed to inform decision-making, enable operational efficiencies and continuously improve the performance of the product. It can not only refer to interaction with physical world objects but also to interaction with virtual (computing environment) objects. A smart physical object may be created either as an artifact or manufactured product or by embedding electronic tags such as RFID tags or sensors into non-smart physical objects. Smart virtual objects are created as software objects that are intrinsic when creating and operating a virtual or cyber world simulation or game. The concept of a smart object has several origins and uses, see History. There are also several overlapping terms, see also smart device, tangible object or tangible user interface and Thing as in the Internet of things. == History == In the early 1990s, Mark Weiser, from whom the term ubiquitous computing originated, referred to a vision "When almost every object either contains a computer or can have a tab attached to it, obtaining information will be trivial", Although Weiser did not specifically refer to an object as being smart, his early work did imply that smart physical objects are smart in the sense that they act as digital information sources. Hiroshi Ishii and Brygg Ullmer refer to tangible objects in terms of tangibles bits or tangible user interfaces that enable users to "grasp & manipulate" bits in the center of users' attention by coupling the bits with everyday physical objects and architectural surfaces. The smart object concept was introduced by Marcelo Kallman and Daniel Thalmann as an object that can describe its own possible interactions. The main focus here is to model interactions of smart virtual objects with virtual humans, agents, in virtual worlds. The opposite approach to smart objects is 'plain' objects that do not provide this information. The additional information provided by this concept enables far more general interaction schemes, and can greatly simplify the planner of an artificial intelligence agent. In contrast to smart virtual objects used in virtual worlds, Lev Manovich focuses on physical space filled with electronic and visual information. Here, "smart objects" are described as "objects connected to the Net; objects that can sense their users and display smart behaviour". More recently in the early 2010s, smart objects are being proposed as a key enabler for the vision of the Internet of things. The combination of the Internet and emerging technologies such as near field communications, real-time localization, and embedded sensors enables everyday objects to be transformed into smart objects that can understand and react to their environment. Such objects are building blocks for the Internet of things and enable novel computing applications. In 2018, one of the world's first smart houses was built in Klaukkala, Finland in the form of a five-floor apartment block, using the Kone Residential Flow solution created by KONE, allowing even a smartphone to act as a home key. == Characteristics == Although we can view interaction with physical smart object in the physical world as distinct from interaction with virtual smart objects in a virtual simulated world, these can be related. Poslad considers the progression of: how humans use models of smart objects situated in the physical world to enhance human to physical world interaction; versus how smart physical objects situated in the physical world can model human interaction in order to lessen the need for human to physical world interaction; versus how virtual smart objects by modelling both physical world objects and modelling humans as objects and their subsequent interactions can form a predominantly smart virtual object environment. === Smart physical objects === The concept smart for a smart physical object simply means that it is active, digital, networked, can operate to some extent autonomously, is reconfigurable and has local control of the resources it needs such as energy, data storage, etc. Note, a smart object does not necessarily need to be intelligent as in exhibiting a strong essence of artificial intelligence—although it can be designed to also be intelligent. Physical world smart objects can be described in terms of three properties: Awareness: is a smart object's ability to understand (that is, sense, interpret, and react to) events and human activities occurring in the physical world. Representation: refers to a smart object's application and programming model—in particular, programming abstractions. Interaction: denotes the object's ability to converse with the user in terms of input, output, control, and feedback. Based upon these properties, these have been classified into three types: Activity-Aware Smart Objects: Are objects that can record information about work activities and its own use. Policy-Aware Smart Objects: Are objects that are activity-aware Objects can interpret events and activities with respect to predefined organizational policies. Process-Aware Smart Objects: Processes play a fundamental role in industrial work management and operation. A process is a collection of related activities or tasks that are ordered according to their position in time and space. === Smart virtual objects === For the virtual object in a virtual world case, an object is called smart when it has the ability to describe its possible interactions. This focuses on constructing a virtual world using only virtual objects that contain their own interaction information. There are four basic elements to constructing such a smart virtual object framework. Object properties: physical properties and a text description Interaction information: position of handles, buttons, grips, and the like Object behavior: different behaviors based on state variables Agent behaviors: description of the behavior an agent should follow when using the object Some versions of smart objects also include animation information in the object information, but this is not considered to be an efficient approach, since this can make objects inappropriately oversized. === Categorization === The terms smart, connected product or smart product can be confusing as it is used to cover a broad range of different products, ranging from smart home appliances (e.g., smart bathroom scales or smart light bulbs) to smart cars (e.g., Tesla). While these products share certain similarities, they often differ substantially in their capabilities. Raff et al. developed a conceptual framework that distinguishes different smart products based on their capabilities, which features 4 types of smart product archetypes (in ascending order of "smartness"). Digital Connected Responsive Intelligent == Advantages == Smart, connected products have three primary components: Physical – made up of the product's mechanical and electrical parts. Smart – made up of sensors, microprocessors, data storage, controls, software, and an embedded operating system with enhanced user interface. Connectivity – made up of ports, antennae, and protocols enabling wired/wireless connections that serve two purposes, it allows data to be exchanged with the product and enables some functions of the product to exist outside the physical device. Each component expands the capabilities of one another resulting in "a virtuous cycle of value improvement". First, the smart components of a product amplify the value and capabilities of the physical components. Then, connectivity amplifies the value and capabilities of the smart components. These improvements include: Monitoring of the product's conditions, its external environment, and its operations and usage. Control of various product functions to better respond to changes in its environment, as well as to personalize the user experience. Optimization of the product's overall operations based on actual performance data, and reduction of downtimes through predictive maintenance and remote service. Autonomous product operation, including learning from their environment, adapting to users' preferences and self-diagnosing and service. === The Internet of things (IoT) === The Internet of things is the network of physical objects that contain embedded technology to communicate and sense or interact with their internal states or the external environment. The phrase "Internet of things" reflects the gro
Empirical risk minimization
In statistical learning theory, the principle of empirical risk minimization defines a family of learning algorithms based on evaluating performance over a known and fixed dataset. The core idea is based on an application of the law of large numbers; more specifically, we cannot know exactly how well a predictive algorithm will work in practice (i.e. the "true risk") because we do not know the true distribution of the data, but we can instead estimate and optimize the performance of the algorithm on a known set of training data. The performance over the known set of training data is referred to as the "empirical risk". == Background == The following situation is a general setting of many supervised learning problems. There are two spaces of objects X {\displaystyle X} and Y {\displaystyle Y} and we would like to learn a function h : X → Y {\displaystyle \ h:X\to Y} (often called hypothesis) which outputs an object y ∈ Y {\displaystyle y\in Y} , given x ∈ X {\displaystyle x\in X} . To do so, there is a training set of n {\displaystyle n} examples ( x 1 , y 1 ) , … , ( x n , y n ) {\displaystyle \ (x_{1},y_{1}),\ldots ,(x_{n},y_{n})} where x i ∈ X {\displaystyle x_{i}\in X} is an input and y i ∈ Y {\displaystyle y_{i}\in Y} is the corresponding response that is desired from h ( x i ) {\displaystyle h(x_{i})} . To put it more formally, assuming that there is a joint probability distribution P ( x , y ) {\displaystyle P(x,y)} over X {\displaystyle X} and Y {\displaystyle Y} , and that the training set consists of n {\displaystyle n} instances ( x 1 , y 1 ) , … , ( x n , y n ) {\displaystyle \ (x_{1},y_{1}),\ldots ,(x_{n},y_{n})} drawn i.i.d. from P ( x , y ) {\displaystyle P(x,y)} . The assumption of a joint probability distribution allows for the modelling of uncertainty in predictions (e.g. from noise in data) because y {\displaystyle y} is not a deterministic function of x {\displaystyle x} , but rather a random variable with conditional distribution P ( y | x ) {\displaystyle P(y|x)} for a fixed x {\displaystyle x} . It is also assumed that there is a non-negative real-valued loss function L ( y ^ , y ) {\displaystyle L({\hat {y}},y)} which measures how different the prediction y ^ {\displaystyle {\hat {y}}} of a hypothesis is from the true outcome y {\displaystyle y} . For classification tasks, these loss functions can be scoring rules. The risk associated with hypothesis h ( x ) {\displaystyle h(x)} is then defined as the expectation of the loss function: R ( h ) = E [ L ( h ( x ) , y ) ] = ∫ L ( h ( x ) , y ) d P ( x , y ) . {\displaystyle R(h)=\mathbf {E} [L(h(x),y)]=\int L(h(x),y)\,dP(x,y).} A loss function commonly used in theory is the 0-1 loss function: L ( y ^ , y ) = { 1 if y ^ ≠ y 0 if y ^ = y {\displaystyle L({\hat {y}},y)={\begin{cases}1&{\mbox{ if }}\quad {\hat {y}}\neq y\\0&{\mbox{ if }}\quad {\hat {y}}=y\end{cases}}} . The ultimate goal of a learning algorithm is to find a hypothesis h ∗ {\displaystyle h^{}} among a fixed class of functions H {\displaystyle {\mathcal {H}}} for which the risk R ( h ) {\displaystyle R(h)} is minimal: h ∗ = a r g m i n h ∈ H R ( h ) . {\displaystyle h^{}={\underset {h\in {\mathcal {H}}}{\operatorname {arg\,min} }}\,{R(h)}.} For classification problems, the Bayes classifier is defined to be the classifier minimizing the risk defined with the 0–1 loss function. == Formal definition == In general, the risk R ( h ) {\displaystyle R(h)} cannot be computed because the distribution P ( x , y ) {\displaystyle P(x,y)} is unknown to the learning algorithm. However, given a sample of iid training data points, we can compute an estimate, called the empirical risk, by computing the average of the loss function over the training set; more formally, computing the expectation with respect to the empirical measure: R emp ( h ) = 1 n ∑ i = 1 n L ( h ( x i ) , y i ) . {\displaystyle \!R_{\text{emp}}(h)={\frac {1}{n}}\sum _{i=1}^{n}L(h(x_{i}),y_{i}).} The empirical risk minimization principle states that the learning algorithm should choose a hypothesis h ^ {\displaystyle {\hat {h}}} which minimizes the empirical risk over the hypothesis class H {\displaystyle {\mathcal {H}}} : h ^ = a r g m i n h ∈ H R emp ( h ) . {\displaystyle {\hat {h}}={\underset {h\in {\mathcal {H}}}{\operatorname {arg\,min} }}\,R_{\text{emp}}(h).} Thus, the learning algorithm defined by the empirical risk minimization principle consists in solving the above optimization problem. == Properties == Guarantees for the performance of empirical risk minimization depend strongly on the function class selected as well as the distributional assumptions made. In general, distribution-free methods are too coarse, and do not lead to practical bounds. However, they are still useful in deriving asymptotic properties of learning algorithms, such as consistency. In particular, distribution-free bounds on the performance of empirical risk minimization given a fixed function class can be derived using bounds on the VC complexity of the function class. For simplicity, considering the case of binary classification tasks, it is possible to bound the probability of the selected classifier, ϕ n {\displaystyle \phi _{n}} being much worse than the best possible classifier ϕ ∗ {\displaystyle \phi ^{}} . Consider the risk L {\displaystyle L} defined over the hypothesis class C {\displaystyle {\mathcal {C}}} with growth function S ( C , n ) {\displaystyle {\mathcal {S}}({\mathcal {C}},n)} given a dataset of size n {\displaystyle n} . Then, for every ϵ > 0 {\displaystyle \epsilon >0} : P ( L ( ϕ n ) − L ( ϕ ∗ ) > ϵ ) ≤ 8 S ( C , n ) exp { − n ϵ 2 / 32 } {\displaystyle \mathbb {P} \left(L(\phi _{n})-L(\phi ^{})>\epsilon \right)\leq {\mathcal {8}}S({\mathcal {C}},n)\exp\{-n\epsilon ^{2}/32\}} Similar results hold for regression tasks. These results are often based on uniform laws of large numbers, which control the deviation of the empirical risk from the true risk, uniformly over the hypothesis class. === Impossibility results === It is also possible to show lower bounds on algorithm performance if no distributional assumptions are made. This is sometimes referred to as the No free lunch theorem. Even though a specific learning algorithm may provide the asymptotically optimal performance for any distribution, the finite sample performance is always poor for at least one data distribution. This means that no classifier can improve on the error for a given sample size for all distributions. Specifically, let ϵ > 0 {\displaystyle \epsilon >0} and consider a sample size n {\displaystyle n} and classification rule ϕ n {\displaystyle \phi _{n}} , there exists a distribution of ( X , Y ) {\displaystyle (X,Y)} with risk L ∗ = 0 {\displaystyle L^{}=0} (meaning that perfect prediction is possible) such that: E L n ≥ 1 / 2 − ϵ . {\displaystyle \mathbb {E} L_{n}\geq 1/2-\epsilon .} It is further possible to show that the convergence rate of a learning algorithm is poor for some distributions. Specifically, given a sequence of decreasing positive numbers a i {\displaystyle a_{i}} converging to zero, it is possible to find a distribution such that: E L n ≥ a i {\displaystyle \mathbb {E} L_{n}\geq a_{i}} for all n {\displaystyle n} . This result shows that universally good classification rules do not exist, in the sense that the rule must be low quality for at least one distribution. === Computational complexity === Empirical risk minimization for a classification problem with a 0-1 loss function is known to be an NP-hard problem even for a relatively simple class of functions such as linear classifiers. Nevertheless, it can be solved efficiently when the minimal empirical risk is zero, i.e., data is linearly separable. In practice, machine learning algorithms cope with this issue either by employing a convex approximation to the 0–1 loss function (like hinge loss for SVM), which is easier to optimize, or by imposing assumptions on the distribution P ( x , y ) {\displaystyle P(x,y)} (and thus stop being agnostic learning algorithms to which the above result applies). In the case of convexification, Zhang's lemma majors the excess risk of the original problem using the excess risk of the convexified problem. Minimizing the latter using convex optimization also allow to control the former. == Tilted empirical risk minimization == Tilted empirical risk minimization is a machine learning technique used to modify standard loss functions like squared error, by introducing a tilt parameter. This parameter dynamically adjusts the weight of data points during training, allowing the algorithm to focus on specific regions or characteristics of the data distribution. Tilted empirical risk minimization is particularly useful in scenarios with imbalanced data or when there is a need to emphasize errors in certain parts of the prediction space.
H (company)
H Company, also known simply as H, is a French artificial intelligence startup which develops "action-oriented" artificial intelligence agents for enterprise automation and productivity. In May 2024, H Company closed a record-setting $220 million seed round, at the time the largest AI raise in Europe. In 2026, H Company released Holo 3, the latest generation of its computer-use AI models. The update marked a major advance in agentic AI, enabling agents to navigate any user interface, interpret screens, and complete complex, multi-step tasks across enterprise systems—much like a human user. This breakthrough positioned H Company at the frontier of computer-use autonomy, accelerating the integration of AI in enterprise workflows. == History == H Company was founded in 2023 in Paris by Laurent Sifre, Charles Kantor, and three DeepMind veterans: Daan Wiestra, Karl Tuyls, Julien Perollat. In May 2024, the firm secured what was then the largest European AI seed round, totaling $220 million led by US investors including Eric Schmidt (former Google CEO), Amazon, and backed by Accel, Bpifrance, UiPath, Eurazeo, Xavier Niel, Yuri Milner, Bernard Arnault, Samsung and others. In August 2024, three cofounders (Wiestra, Tuyls, Perollat) left the company over operational disagreements. In November 2024, H launched Runner H, its first agentic-API platform, which combined a large language model (LLM) and a reduced, 2-billion parameter vision-language model (VLM). In May 2025, H Company acquired Mithril Security, and in June 2025 the company widened its offering for agentic models. In June 2025, Gautier Cloix (formerly CEO Palantir France) replaced Charles Kantor as CEO of H Company, aiming to pivot the company towards a "forward deployed engineers" model. In July 2025, H Company introduced Surfer-H-CLI, an open-source, web-native Chrome agent designed for browser-based automation—able to search, scroll, click, and type on behalf of users and controllable via any visual language model (VLM). When paired with its June 2025 open-sourced 3B-parameter Holo-1 model, Surfer-H-CLI achieved 92.2% WebVoyager benchmark accuracy. == Activity == H Company creates enterprise AI models and agents (agentic AI) to automate and optimize complex workflows. H Company specifically designs AI agents called computer use capable of autonomously interfacing with any software (local or cloud-based) to detect and automate repetitive operations. H Company is based in Paris, France, with international offices in London and New York. H Company raised $220 million since its inception. Gautier Cloix is president and CEO of the company. H Company client include the French national lottery FDJ United. In March 2026, H Company released Holo3, a family of artificial intelligence models designed to operate digital systems by interacting directly with user interfaces. Holo3 enables agents ("virtual humanoids") to understand what is displayed in front-end environments—such as web pages, desktop applications, and other graphical user interfaces—and perform actions such as clicking, typing, and navigating across them to complete multi-step tasks. On the OSWorld-Verified benchmark, Holo3 reportedly achieved about 78.9%, surpassing the scores of OpenAI’s GPT‑5.4 and Anthropic’s Claude Opus 4.6 on this specific test, at roughly one-tenth of the inference cost of these proprietary systems. The release has been presented as a significant step toward automating routine digital workflows, allowing organizations to offload repetitive on-screen work, such as data entry and reconciliation across multiple tools, to AI-based agents.
Enterprise cognitive system
Enterprise cognitive systems (ECS) are part of a broader shift in computing, from a programmatic to a probabilistic approach, called cognitive computing. An Enterprise Cognitive System makes a new class of complex decision support problems computable, where the business context is ambiguous, multi-faceted, and fast-evolving, and what to do in such a situation is usually assessed today by the business user. An ECS is designed to synthesize a business context and link it to the desired outcome. It recommends evidence-based actions to help the end-user achieve the desired outcome. It does so by finding past situations similar to the current situation, and extracting the repeated actions that best influence the desired outcome. While general-purpose cognitive systems can be used for different outputs, prescriptive, suggestive, instructive, or simply entertaining, an enterprise cognitive system is focused on action, not insight, to help in assessing what to do in a complex situation. == Key characteristics == ECS have to be: Adaptive: They must learn as information changes, and as goals and requirements evolve. They must resolve ambiguity and tolerate unpredictability. They must be engineered to feed on dynamic data in real time, or near real time. In the Enterprise, near-real time learning from data requires an agile information federation approach to ingest incremental data updates as they occur, and an unsupervised learning approach to ensure that new best practice is leveraged across the organization in a timely manner. Interactive: They must interact easily with users so that those users can define their needs comfortably. They may also interact with other processors, devices, and Cloud services, as well as with people. In the Enterprise, interactions are controlled via existing workflows and UIs. Therefore, embedding best practices directly into these existing interfaces, in the context of a specific step, is critical to ensure maximum end-user adoption. Iterative and stateful: They must aid in defining a problem by asking questions or finding additional source input if a problem statement is ambiguous or incomplete. They must “remember” previous interactions in a process and return information that is suitable for the specific application at that point in time. In the Enterprise, business context is often structured by a business process, and therefore sufficiently data-rich to make relevant recommendations without significant iterations from the end-user. A stateful memory of overall interactions across communication channels is critical for understanding of context, as a static profile will not capture intent and outcome potential the way behavior does. Contextual: They must understand, identify, and extract contextual elements such as meaning, syntax, time, location, appropriate domain, regulations, user's profile, process, task and goal. They may draw on multiple sources of information, including both structured and unstructured digital information, as well as sensory inputs (visual, gestural, auditory, or sensor-provided). In the Enterprise, Context is fragmented and must be aggregated across data types, sources, and locations. In most business environments, such data is captured in existing enterprise information systems, and the effort is linked to quickly source and unify such information. It is rare to have to directly process sensor, audio or visual data in real-time as direct input into the enterprise cognitive system. Instead, these data types are captured by Enterprise Applications and pre-processed into a binary or text format prior to consumption by the System. == Business applications powered by an ECS == Bottlenose – trends and brands monitoring Cybereason – security threat monitoring Dataminr – social media monitoring
Digital curation
Digital curation is the selection, preservation, maintenance, collection, and archiving of digital assets. It is a process that establishes, maintains, and adds value to repositories of digital data for present and future use. The implementation of digital curation is often carried out by archivists, librarians, scientists, historians, and scholars to ensure users have access to reliable, high-quality resources. Enterprises are also starting to adopt digital curation as a means to improve the quality of information and data within their operational and strategic processes. A successful digital curation initiative will help to mitigate digital obsolescence, keeping the information accessible to users indefinitely. Digital curation includes various aspects, including digital asset management, data curation, digital preservation, and electronic records management. == Word History == Much like the word archive has layered meanings and uses, the word curation is both a noun and a verb, used originally in the field of museology to represent a wide range of activities, most often associated with collection care, long-term preservation, and exhibition design. Curation can be a reference to physical repositories that store cultural heritage or natural resource collections (e.g., a curatorial repository) or a representation of varied policies and processes involved with the long-term care and management of heritage collections, digital archives, and research data (e.g, curatorial/collections management plans, curation life-cycle, and data curation). Yet curation is also associated with short-term objectives and processes of selection and interpretation for the purposes of presentation, such as for gallery exhibitions and websites, which contribute to knowledge creation. It has also been applied to interaction with social media including compiling digital images, web links, and movie files. The term curation entered the legal framework through federal historic preservation laws, starting with the National Historic Preservation Act of 1966, and was further defined and coded into federal regulations through 36 CFR Part 79: Curation of Federally-owned and Administered Archaeological Collections. Curation has since permeated into an array of disciplines but remains closely tied to heritage and information management. == Core Principles and Activities == The term "digital curation" was first used in the e-science and biological science fields as a means of differentiating the additional suite of activities ordinarily employed by library and museum curators to add value to their collections and enable its reuse from the smaller subtask of simply preserving the data, a significantly more concise archival task. Additionally, the historical understanding of the term "curator" demands more than simple care of the collection. A curator is expected to command academic mastery of the subject matter as a requisite part of appraisal and selection of assets and any subsequent adding of value to the collection through application of metadata. === Principles === There are five commonly accepted principles that govern the occupation of digital curation: Manage the complete birth-to-retirement life cycle of the digital asset. Evaluate and cull assets for inclusion in the collection. Apply preservation methods to strengthen the asset’s integrity and reusability for future users. Act proactively throughout the asset life cycle to add value to both the digital asset and the collection. Facilitate the appropriate degree of access to users. === Methodology === The Digital Curation Center offers the following step-by-step life cycle procedures for putting the above principles into practice: Sequential Actions: Conceptualize: Consider what digital material you will be creating and develop storage options. Take into account websites, publications, email, among other types of digital output. Create: Produce digital material and attach all relevant metadata, typically the more metadata the more accessible the information. Appraise and select: Consult the mission statement of the institution or private collection and determine what digital data is relevant. There may also be legal guidelines in place that will guide the decision process for a particular collection. Ingest: Send digital material to the predetermined storage solution. This may be an archive, repository or other facility. Preservation action: Employ measures to maintain the integrity of the digital material. Store: Secure data within the predetermined storage facility. Access, use, and reuse: Determine the level of accessibility for the range of digital material created. Some material may be accessible only by password and other material may be freely accessible to the public. Routinely check that material is still accessible for the intended audience and that the material has not been compromised through multiple uses. Transform: If desirable or necessary the material may be transferred into a different digital format. Occasional Actions: Dispose: Discard any digital material that is not deemed necessary to the institution. Reappraise: Reevaluate material to ensure that is it still relevant and is true to its original form. Migrate: Migrate data to another format in order to protect data for using better in the future. == Related terms == The term "digital curation" is sometimes used interchangeably with terms such as "digital preservation" and "digital archiving." While digital preservation does focus a significant degree of energy on optimizing reusability, preservation remains a subtask to the concept of digital archiving, which is in turn a subtask of digital curation. For example, archiving is a part of curation, but so are subsequent tasks such as themed collection-building, which is not considered an archival task. Similarly, preservation is a part of archiving, as are the tasks of selection and appraisal that are not necessarily part of preservation. Data curation is another term that is often used interchangeably with digital curation, however common usage of the two terms differs. While "data" is a more all-encompassing term that can be used generally to indicate anything recorded in binary form, the term "data curation" is most common in scientific parlance and usually refers to accumulating and managing information relative to the process of research. Data-driven research of education request the role of information professional gradually develop tradition of digital service to data curation particularly at the management of digital research data. So, while documents and other discrete digital assets are technically a subset of the broader concept of data, in the context of scientific vernacular digital curation represents a broader purview of responsibilities than data curation due to its interest in preserving and adding value to digital assets of any kind. == Challenges == === Rate of creation of new data and data sets === The ever lowering cost and increasing prevalence of entirely new categories of technology has led to a quickly growing flow of new data sets. These come from well established sources such as business and government, but the trend is also driven by new styles of sensors becoming embedded in more areas of modern life. This is particularly true of consumers, whose production of digital assets is no longer relegated strictly to work. Consumers now create wider ranges of digital assets, including videos, photos, location data, purchases, and fitness tracking data, just to name a few, and share them in wider ranges of social platforms. Additionally, the advance of technology has introduced new ways of working with data. Some examples of this are international partnerships that leverage astronomical data to create "virtual observatories," and similar partnerships have also leveraged data resulting from research at the Large Hadron Collider at CERN and the database of protein structures at the Protein Data Bank. === Storage format evolution and obsolescence === By comparison, archiving of analog assets is notably passive in nature, often limited to simply ensuring a suitable storage environment. Digital preservation requires a more proactive approach. Today’s artifacts of cultural significance are notably transient in nature and prone to obsolescence when social trends or dependent technologies change. This rapid progression of technology occasionally makes it necessary to migrate digital asset holdings from one file format to another in order to mitigate the dangers of hardware and software obsolescence which would render the asset unusable. === Underestimation of human labor costs === Modern tools for program planning often underestimate the amount of human labor costs required for adequate digital curation of large collections. As a result cost-benefit assessments often paint an inaccurate picture of both the amount of work involved and the true cost to the institution for bot
Feature (machine learning)
In machine learning and pattern recognition, a feature is an individual measurable property or characteristic of a data set. Choosing informative, discriminating, and independent features is crucial to producing effective algorithms for pattern recognition, classification, and regression tasks. Features are usually numeric, but other types such as strings and graphs are used in syntactic pattern recognition, after some pre-processing step such as one-hot encoding. The concept of "features" is related to that of explanatory variables used in statistical techniques such as linear regression. == Feature types == In feature engineering, two types of features are commonly used: numerical and categorical. Numerical features are continuous values that can be measured on a scale. Examples of numerical features include age, height, weight, and income. Numerical features can be used in machine learning algorithms directly. Categorical features are discrete values that can be grouped into categories. Examples of categorical features include gender, color, and zip code. Categorical features typically need to be converted to numerical features before they can be used in machine learning algorithms. This can be done using a variety of techniques, such as one-hot encoding, label encoding, and ordinal encoding. The type of feature that is used in feature engineering depends on the specific machine learning algorithm that is being used. Some machine learning algorithms, such as decision trees, can handle both numerical and categorical features. Other machine learning algorithms, such as linear regression, can only handle numerical features. == Classification == A numeric feature can be conveniently described by a feature vector. One way to achieve binary classification is using a linear predictor function (related to the perceptron) with a feature vector as input. The method consists of calculating the scalar product between the feature vector and a vector of weights, qualifying those observations whose result exceeds a threshold. Algorithms for classification from a feature vector include nearest neighbor classification, neural networks, and statistical techniques such as Bayesian approaches. == Examples == In character recognition, features may include histograms counting the number of black pixels along horizontal and vertical directions, number of internal holes, stroke detection and many others. In speech recognition, features for recognizing phonemes can include noise ratios, length of sounds, relative power, filter matches, logarithmic Mel-scale spectral vectors and Mel-frequency cepstral coefficients, which represent the frequency characteristics of audio signals. In spam detection algorithms, features may include the presence or absence of certain email headers, the email structure, the language, the frequency of specific terms, the grammatical correctness of the text. In computer vision, there are a large number of possible features, such as edges and objects. == Feature vectors == In pattern recognition and machine learning, a feature vector is an n-dimensional vector of numerical features that represent some object. Many algorithms in machine learning require a numerical representation of objects, since such representations facilitate processing and statistical analysis. When representing images, the feature values might correspond to the pixels of an image, while when representing texts the features might be the frequencies of occurrence of textual terms. Feature vectors are equivalent to the vectors of explanatory variables used in statistical procedures such as linear regression. Feature vectors are often combined with weights using a dot product in order to construct a linear predictor function that is used to determine a score for making a prediction. The vector space associated with these vectors is often called the feature space. In order to reduce the dimensionality of the feature space, a number of dimensionality reduction techniques can be employed. Higher-level features can be obtained from already available features and added to the feature vector; for example, for the study of diseases the feature 'Age' is useful and is defined as Age = 'Year of death' minus 'Year of birth' . This process is referred to as feature construction. Feature construction is the application of a set of constructive operators to a set of existing features resulting in construction of new features. Examples of such constructive operators include checking for the equality conditions {=, ≠}, the arithmetic operators {+,−,×, /}, the array operators {max(S), min(S), average(S)} as well as other more sophisticated operators, for example count(S, C) that counts the number of features in the feature vector S satisfying some condition C or, for example, distances to other recognition classes generalized by some accepting device. Feature construction has long been considered a powerful tool for increasing both accuracy and understanding of structure, particularly in high-dimensional problems. Applications include studies of disease and emotion recognition from speech. == Selection and extraction == The initial set of raw features can be redundant and large enough that estimation and optimization is made difficult or ineffective. Therefore, a preliminary step in many applications of machine learning and pattern recognition consists of selecting a subset of features, or constructing a new and reduced set of features to facilitate learning, and to improve generalization and interpretability. Extracting or selecting features is a combination of art and science; developing systems to do so is known as feature engineering. It requires the experimentation of multiple possibilities and the combination of automated techniques with the intuition and knowledge of the domain expert. Automating this process is feature learning, where a machine not only uses features for learning, but learns the features itself.