AI Analyse Your Face

AI Analyse Your Face — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Meta-Labeling

Meta-labeling, also known as corrective AI, is a machine learning (ML) technique utilized in quantitative finance to enhance the performance of investment and trading strategies, developed in 2017 by Marcos López de Prado at Guggenheim Partners and Cornell University. The core idea is to separate the decision of trade direction (side) from the decision of trade sizing, addressing the inefficiencies of simultaneously learning both side and size predictions. The side decision involves forecasting market movements (long, short, neutral), while the size decision focuses on risk management and profitability. It serves as a secondary decision-making layer that evaluates the signals generated by a primary predictive model. By assessing the confidence and likely profitability of those signals, meta-labeling allows investors and algorithms to dynamically size positions and suppress false positives. == Motivation == Meta-labeling is designed to improve precision without sacrificing recall. As noted by López de Prado, attempting to model both the direction and the magnitude of a trade using a single algorithm can result in poor generalization. By separating these tasks, meta-labeling enables greater flexibility and robustness: Enhances control over capital allocation. Reduces overfitting by limiting model complexity. Allows the use of interpretability tools and tailored thresholds to manage risk. Enables dynamic trade suppression in unfavorable regimes. == Applications == Meta-labeling has been applied in a variety of financial ML contexts, including: Algorithmic trading: Filtering and sizing trades to reduce false positives. Portfolio optimization: Scaling exposure across multiple signals with differing confidence levels. Risk management: Dynamically disabling strategies in adverse market conditions. Model validation: Interpreting when and why a model may be underperforming due to regime shifts. == General architecture == Meta-labeling decouples two core components of systematic trading strategies: directional prediction and position sizing. The process involves training a primary model to generate trade signals (e.g., buy, sell, or hold) and then training a secondary model to determine whether each signal is likely to lead to a profitable trade. The second model outputs a probability that is interpreted as the confidence in the forecast, which can be used to adjust the position size or to filter out unreliable trades. Meta-labeling is typically implemented as a three-stage process: Primary model (M1): Predicts the direction or label of a financial outcome using features such as market prices, returns, or volatility indicators. A typical output is directional, e.g., Y ∈ {−1,0,1}, representing short, neutral, or long positions. Secondary model (M2): A binary classifier trained to predict whether the primary model's prediction will be profitable. The target variable is a binary meta-label F ∈ { 0 , 1 } {\displaystyle F\in \{0,1\}} . Inputs can include features used in the primary model, performance diagnostics, or market regime data. Position sizing algorithm (M3): Translates the output probability of the secondary model into a position size. Higher confidence scores result in larger allocations, while lower confidence leads to reduced or zero exposure. === Stage 1: Forecasting side === Primary model architecture Figure 1 Figure 1 presents the architecture of a primary model. It focuses on forecasting the side of the trade. Following the example, this model (M1) takes in input data – such as open-high-low-close data and determines the side of the position to take: a negative number is a short position, and positive number is a long position, the range is set between −1 and 1 (the closer it is to −1 or 1, the stronger the models conviction is). When training the model, the labels are −1 and 1, based on the direction of forward returns for some predefined investment horizon. The researcher may decide to apply a recall check (τ: "Tau") by setting a minimum threshold that the initial output needs to be to qualify of a short or long position (if the threshold is not met, no side forecast is predicted, leading to closing of any open positions), this leads to the primary model output which is one of three possible side forecasts: −1, 0, or 1. The primary model also generates evaluation data which can be used by the secondary model, to improve performance of size forecasts. Some examples of evaluation data include rolling accuracy, F1, recall, precision, and AUC scores. === Stage 2: Filtering out false positives === General meta-labeling architecture Figure 2 Next comes the phase of filtering out false positives, by applying a secondary machine learning model (M2), which is a binary classifier trained to determine if the trade will be profitable or not. The model takes as input four general groupings of data: General input data which is predictive of a false positive. For example the last 30 days rolling volatility of the underlying asset. Evaluation data. Market state and regime data, one may find that macro economic data or clustering the market into regimes may help as specific trading strategies are known to perform better in particular regimes. Example: momentum based strategies perform best in periods with low volatility and strong directional moves. Primary models initial input which is a value between −1 and 1. This highlights the strength of the primary models conviction. The output of the model is a value between −1 and 1 (if using a Tanh function) which will indicate the strength of the conviction that a short or long position is profitable, or it could simply be between 0 and 1 (using a sigmoid function) if one only wanted to know if it made money or not. This output allows filtering out trades that are likely to lead to losses. One could stop at this point or use the outputs of the secondary model as inputs to a position sizing algorithm (M3) which could further enhance strategy performance metrics by translating the output probability of the secondary model into a position size. Higher confidence scores result in larger allocations, while lower confidence leads to reduced or zero exposure. === Stage 3: Optimizing position sizes === ==== Position sizing methods (M3) ==== Various algorithms have been proposed for transforming predicted probabilities into trade sizes: All-or-nothing: Allocate 100% of capital if the probability exceeds a predefined threshold (e.g., 0.5); otherwise, do not trade. Model confidence: Use the probability score directly as the fraction of capital allocated. Linear scaling: Rescale the model's probabilities using min-max normalization based on the training data. Normal CDF (NCDF): Use a normal cumulative distribution function applied to a z-statistic derived from the predicted probability. Empirical CDF (ECDF): Rank probabilities based on their percentile in the training data to ensure relative allocation. Sigmoid Optimal Position Sizing (SOPS): Applies a smooth non-linear sigmoid transformation optimized to maximize risk-adjusted returns (Sharpe ratio). ==== Model calibration ==== Each machine learning algorithm used in meta-labeling tends to produce outputs with different characteristic distributions; for example, some are approximately normally distributed, whereas others exhibit a pronounced U-shape, concentrating probabilities near the extremes. Due to these varying distributions, simply summing the outputs of different models can inadvertently lead to uneven weighting of signals, biasing trade decisions. To address this, model calibration techniques are essential to adjust the predicted probabilities towards frequentist probabilities, ensuring that model outputs reflect true likelihoods more accurately. Two common calibration techniques are: Platt scaling (Sigmoid scaling): Suitable for correcting S-shaped calibration plots typically produced by models such as support vector machines (SVMs). Isotonic regression: Fits a non-decreasing step function to probabilities and is effective particularly with larger datasets, though it can sometimes lead to overfitting. Transforming predictions to frequentist probabilities is crucial as it provides probabilistic outputs that are directly interpretable as the actual likelihood of an event occurring. Such calibration significantly enhances the effectiveness of fixed position sizing methods, reducing maximum drawdowns and increasing risk-adjusted returns. However, calibration has less impact on position sizing methods that directly estimate parameters from the training data, such as ECDF and SOPS, suggesting that calibration is a critical step mainly for fixed methods that rely heavily on raw model outputs. =
Read more →
Relational data stream management system

A relational data stream management system (RDSMS) is a distributed, in-memory data stream management system (DSMS) that is designed to use standards-compliant SQL queries to process unstructured and structured data streams in real-time. Unlike SQL queries executed in a traditional RDBMS, which return a result and exit, SQL queries executed in a RDSMS do not exit, generating results continuously as new data become available. Continuous SQL queries in a RDSMS use the SQL Window function to analyze, join and aggregate data streams over fixed or sliding windows. Windows can be specified as time-based or row-based. == RDSMS SQL Query Examples == Continuous SQL queries in a RDSMS conform to the ANSI SQL standards. The most common RDSMS SQL query is performed with the declarative SELECT statement. A continuous SQL SELECT operates on data across one or more data streams, with optional keywords and clauses that include FROM with an optional JOIN subclause to specify the rules for joining multiple data streams, the WHERE clause and comparison predicate to restrict the records returned by the query, GROUP BY to project streams with common values into a smaller set, HAVING to filter records resulting from a GROUP BY, and ORDER BY to sort the results. The following is an example of a continuous data stream aggregation using a SELECT query that aggregates a sensor stream from a weather monitoring station. The SELECTquery aggregates the minimum, maximum and average temperature values over a one-second time period, returning a continuous stream of aggregated results at one second intervals. RDSMS SQL queries also operate on data streams over time or row-based windows. The following example shows a second continuous SQL query using the WINDOW clause with a one-second duration. The WINDOW clause changes the behavior of the query, to output a result for each new record as it arrives. Hence the output is a stream of incrementally updated results with zero result latency.
Read more →
Least-squares spectral analysis

Least-squares spectral analysis (LSSA) is a class of methods for estimating a frequency spectrum by fitting sinusoids to data using a least-squares fit. Unlike Fourier analysis, the most widely used spectral method in science, data need not be equally spaced to use LSSA. Furthermore, while Fourier analysis generally amplifies long-period noise in long or gapped records, LSSA mitigates such problems. The first strictly least-squares LSSA method was developed in 1969 and 1971, and is known as the Vaníček method or the Gauss–Vaniček method, after its inventor Petr Vaníček and Carl Friedrich Gauss, the inventor of the least-squares method for error minimization. A widely known LSSA variant is the Lomb method or the Lomb–Scargle periodogram, based on dated computational simplifications of the Vaníček method introduced in the 1970s and 1980s, first by Nicholas R. Lomb and later by Jeffrey D. Scargle. Other LSSA variants have been subsequently developed. == Historical background == The close connections between Fourier analysis, the periodogram, and the least-squares fitting of sinusoids have been known for a long time. However, most developments are restricted to complete data sets of equally spaced samples. In 1963, Freek J. M. Barning of Mathematisch Centrum, Amsterdam, handled unequally spaced data by similar techniques, including both a periodogram analysis equivalent to what nowadays is called the Lomb method and least-squares fitting of selected frequencies of sinusoids determined from such periodograms — and connected by a procedure known today as the matching pursuit with post-back fitting or the orthogonal matching pursuit. Petr Vaníček, a Canadian geophysicist and geodesist of the University of New Brunswick, proposed in 1969 also the matching-pursuit approach for equally and unequally spaced data, which he called "successive spectral analysis" and the result a "least-squares periodogram". He generalized this method to account for any systematic components beyond a simple mean, such as a "predicted linear (quadratic, exponential, ...) secular trend of unknown magnitude", and applied it to a variety of samples, in 1971. Vaníček's strictly least-squares method was then simplified in 1976 by Nicholas R. Lomb of the University of Sydney, who pointed out its close connection to periodogram analysis. Subsequently, the definition of a periodogram of unequally spaced data was modified and analyzed by Jeffrey D. Scargle of NASA Ames Research Center, who showed that, with minor changes, it becomes identical to Lomb's least-squares formula for fitting individual sinusoid frequencies. Scargle states that his paper "does not introduce a new detection technique, but instead studies the reliability and efficiency of detection with the most commonly used technique, the periodogram, in the case where the observation times are unevenly spaced," and further points out regarding least-squares fitting of sinusoids compared to periodogram analysis, that his paper "establishes, apparently for the first time, that (with the proposed modifications) these two methods are exactly equivalent." Press summarizes the development this way: A completely different method of spectral analysis for unevenly sampled data, one that mitigates these difficulties and has some other very desirable properties, was developed by Lomb, based in part on earlier work by Barning and Vanicek, and additionally elaborated by Scargle. In 1989, Michael J. Korenberg of Queen's University in Kingston, Ontario, developed the "fast orthogonal search" method of more quickly finding a near-optimal decomposition of spectra or other problems, similar to the technique that later became known as the orthogonal matching pursuit. == Development of LSSA and variants == === The Vaníček method === In the Vaníček method, a discrete data set is approximated by a weighted sum of sinusoids of progressively determined frequencies using a standard linear regression or least-squares fit. The frequencies are chosen using a method similar to Barning's, but going further in optimizing the choice of each successive new frequency by picking the frequency that minimizes the residual after least-squares fitting (equivalent to the fitting technique now known as matching pursuit with pre-backfitting). The number of sinusoids must be less than or equal to the number of data samples (counting sines and cosines of the same frequency as separate sinusoids). The relationship between the DFT and the approximation of trigonometric functions using the least-squares method is well explained in (Strutz, 2017). A data vector Φ is represented as a weighted sum of sinusoidal basis functions, tabulated in a matrix A by evaluating each function at the sample times, with weight vector x: ϕ ≈ A x , {\displaystyle \phi \approx {\textbf {A}}x,} where the weights vector x is chosen to minimize the sum of squared errors in approximating Φ. The solution for x is closed-form, using standard linear regression: x = ( A T A ) − 1 A T ϕ . {\displaystyle x=({\textbf {A}}^{\mathrm {T} }{\textbf {A}})^{-1}{\textbf {A}}^{\mathrm {T} }\phi .} Here the matrix A can be based on any set of functions mutually independent (not necessarily orthogonal) when evaluated at the sample times; functions used for spectral analysis are typically sines and cosines evenly distributed over the frequency range of interest. If we choose too many frequencies in a too-narrow frequency range, the functions will be insufficiently independent, the matrix ill-conditioned, and the resulting spectrum meaningless. When the basis functions in A are orthogonal (that is, not correlated, meaning the columns have zero pair-wise dot products), the matrix ATA is diagonal; when the columns all have the same power (sum of squares of elements), then that matrix is an identity matrix times a constant, so the inversion is trivial. The latter is the case when the sample times are equally spaced and sinusoids chosen as sines and cosines equally spaced in pairs on the frequency interval 0 to a half cycle per sample (spaced by 1/N cycles per sample, omitting the sine phases at 0 and maximum frequency where they are identically zero). This case is known as the discrete Fourier transform, slightly rewritten in terms of measurements and coefficients. x = A T ϕ {\displaystyle x={\textbf {A}}^{\mathrm {T} }\phi } — DFT case for N equally spaced samples and frequencies, within a scalar factor. === The Lomb method === Trying to lower the computational burden of the Vaníček method in 1976 (no longer an issue), Lomb proposed using the above simplification in general, except for pair-wise correlations between sine and cosine bases of the same frequency, since the correlations between pairs of sinusoids are often small, at least when they are not tightly spaced. This formulation is essentially that of the traditional periodogram but adapted for use with unevenly spaced samples. The vector x is a reasonably good estimate of an underlying spectrum, but since we ignore any correlations, Ax is no longer a good approximation to the signal, and the method is no longer a least-squares method — yet in the literature continues to be referred to as such. Rather than just taking dot products of the data with sine and cosine waveforms directly, Scargle modified the standard periodogram formula so to find a time delay τ {\displaystyle \tau } first, such that this pair of sinusoids would be mutually orthogonal at sample times t j {\displaystyle t_{j}} and also adjusted for the potentially unequal powers of these two basis functions, to obtain a better estimate of the power at a frequency. This procedure made his modified periodogram method exactly equivalent to Lomb's method. Time delay τ {\displaystyle \tau } by definition equals to tan ⁡ 2 ω τ = ∑ j sin ⁡ 2 ω t j ∑ j cos ⁡ 2 ω t j . {\displaystyle \tan {2\omega \tau }={\frac {\sum _{j}\sin 2\omega t_{j}}{\sum _{j}\cos 2\omega t_{j}}}.} Then the periodogram at frequency ω {\displaystyle \omega } is estimated as: P x ( ω ) = 1 2 [ [ ∑ j X j cos ⁡ ω ( t j − τ ) ] 2 ∑ j cos 2 ⁡ ω ( t j − τ ) + [ ∑ j X j sin ⁡ ω ( t j − τ ) ] 2 ∑ j sin 2 ⁡ ω ( t j − τ ) ] , {\displaystyle P_{x}(\omega )={\frac {1}{2}}\left[{\frac {\left[\sum _{j}X_{j}\cos \omega (t_{j}-\tau )\right]^{2}}{\sum _{j}\cos ^{2}\omega (t_{j}-\tau )}}+{\frac {\left[\sum _{j}X_{j}\sin \omega (t_{j}-\tau )\right]^{2}}{\sum _{j}\sin ^{2}\omega (t_{j}-\tau )}}\right],} which, as Scargle reports, has the same statistical distribution as the periodogram in the evenly sampled case. At any individual frequency ω {\displaystyle \omega } , this method gives the same power as does a least-squares fit to sinusoids of that frequency and of the form: ϕ ( t ) = A sin ⁡ ω t + B cos ⁡ ω t . {\displaystyle \phi (t)=A\sin \omega t+B\cos \omega t.} In practice, it is always difficult to judge if a given Lomb peak is significant or not, especially when the nature of the noise is unknown, so for example a false-alarm spectr
Read more →
VMDS

VMDS abbreviates the relational database technology called Version Managed Data Store provided by GE Energy as part of its Smallworld technology platform and was designed from the outset to store and analyse the highly complex spatial and topological networks typically used by enterprise utilities such as power distribution and telecommunications. VMDS was originally introduced in 1990 as has been improved and updated over the years. Its current version is 6.0. VMDS has been designed as a spatial database. This gives VMDS a number of distinctive characteristics when compared to conventional attribute only relational databases. == Distributed server processing == VMDS is composed of two parts: a simple, highly scalable data block server called SWMFS (Smallworld Master File Server) and an intelligent client API written in C and Magik. Spatial and attribute data are stored in data blocks that reside in special files called data store files on the server. When the client application requests data it has sufficient intelligence to work out the optimum set of data blocks that are required. This request is then made to SWMFS which returns the data to the client via the network for processing. This approach is particularly efficient and scalable when dealing with spatial and topological data which tends to flow in larger volumes and require more processing then plain attribute data (for example during a map redraw operation). This approach makes VMDS well suited to enterprise deployment that might involve hundreds or even thousands of concurrent clients. == Support for long transactions == Relational databases support short transactions in which changes to data are relatively small and are brief in terms in duration (the maximum period between the start and the end of a transaction is typically a few seconds or less). VMDS supports long transactions in which the volume of data involved in the transaction can be substantial and the duration of the transaction can be significant (days, weeks or even months). These types of transaction are common in advanced network applications used by, for example, power distribution utilities. Due to the time span of a long transaction in this context the amount of change can be significant (not only within the scope of the transaction, but also within the context of the database as a whole). Accordingly, it is likely that the same record might be changed more than once. To cope with this scenario VMDS has inbuilt support for automatically managing such conflicts and allows applications to review changes and accept only those edits that are correct. == Spatial and topological capabilities == As well as conventional relational database features such as attribute querying, join fields, triggers and calculated fields, VMDS has numerous spatial and topological capabilities. This allows spatial data such as points, texts, polylines, polygons and raster data to be stored and analysed. Spatial functions include: find all features within a polygon, calculate the Voronoi polygons of a set of sites and perform a cluster analysis on a set of points. Vector spatial data such as points, polylines and polygons can be given topological attributes that allow complex networks to be modelled. Network analysis engines are provided to answer questions such as find the shortest path between two nodes or how to optimize a delivery route (the travelling salesman problem). A topology engine can be configured with a set of rules that define how topological entities interact with each other when new data is added or existing data edited. == Data abstraction == In VMDS all data is presented to the application as objects. This is different from many relational databases that present the data as rows from a table or query result using say JDBC. VMDS provides a data modelling tool and underlying infrastructure as part of the Smallworld technology platform that allows administrators to associate a table in the database with a Magik exemplar (or class). Magik get and set methods for the Magik exemplar can be automatically generated that expose a table's field (or column). Each VMDS row manifests itself to the application as an instance of a Magik object and is known as an RWO (or real world object). Tables are known as collections in Smallworld parlance. # all_rwos hold all the rwos in the database and is heterogeneous all_rwos << my_application.rwo_set() # valve_collection holds the valve collection valves << all_rwos.select(:collection, {:valve}) number_of_valves << valves.size Queries are built up using predicate objects: # find 'open' valves. open_valves << valves.select(predicate.eq(:operating_status, "open")) number_of_open_valves << open_valves.size _for valve _over open_valves.elements() _loop write(valve.id) _endloop Joins are implemented as methods on the parent RWO. For example, a manager might have several employees who report to him: # get the employee collection. employees << my_application.database.collection(:gis, :employees) # find a manager called 'Steve' and get the first matching element steve << employees.select(predicate.eq(:name, "Steve").and(predicate.eq(:role, "manager")).an_element() # display the names of his direct reports. name is a field (or column) # on the employee collection (or table) _for employee _over steve.direct_reports.elements() _loop write(employee.name) _endloop Performing a transaction: # each key in the hash table corresponds to the name of the field (or column) in # the collection (or table) valve_data << hash_table.new_with( :asset_id, 57648576, :material, "Iron") # get the valve collection directly valve_collection << my_application.database.collection(:gis, :valve) # create an insert transaction to insert a new valve record into the collection a # comment can be provide that describes the transaction transaction << record_transaction.new_insert(valve_collection, valve_data, "Inserted a new valve") transaction.run()
Read more →
Camera interface

The Camera Interface block or CAMIF is the hardware block that interfaces with different image sensor interfaces and provides a standard output that can be used for subsequent image processing. A typical Camera Interface would support at least a parallel interface although these days many camera interfaces are beginning to support the Mobile Industry Processor Interface (MIPI) Camera Serial Interface (CSI) interface. == Electrical connections == The camera interface's parallel interface consists of the following lines: 8 to 12 bits parallel data line These are parallel data lines that carry pixel data. The data transmitted on these lines change with every Pixel Clock (PCLK). Horizontal Sync (HSYNC) This is a special signal that goes from the camera sensor or ISP to the camera interface. An HSYNC indicates that one line of the frame is transmitted. Vertical Sync (VSYNC) This signal is transmitted after the entire frame is transferred. This signal is often a way to indicate that one entire frame is transmitted. Pixel Clock (PCLK) This is the pixel clock and it would change on every pixel. NOTE: The above lines are all treated as input lines to the Camera Interface hardware.
Read more →
Object storage

Object storage (also known as object-based storage or blob storage) is a computer data storage approach that manages data as "blobs" or "objects", as opposed to other storage architectures like file systems, which manage data as a file hierarchy, and block storage, which manages data as blocks within sectors and tracks. Each object is typically associated with a variable amount of metadata, and a globally unique identifier. Object storage can be implemented at multiple levels, including the device level (object-storage device), the system level, and the interface level. In each case, object storage seeks to enable capabilities not addressed by other storage architectures, like interfaces that are directly programmable by the application, a namespace that can span multiple instances of physical hardware, and data-management functions like data replication and data distribution at object-level granularity. Object storage systems allow retention of massive amounts of unstructured data in which data is written once and read once (or many times). Object storage is used for purposes such as storing objects like videos and photos on Facebook, songs on Spotify, or files in online collaboration services, such as Dropbox. One of the limitations with object storage is that it is not intended for transactional data, as object storage was not designed to replace NAS file access and sharing; it does not support the locking and sharing mechanisms needed to maintain a single, accurately updated version of a file. == History == === Origins === Jim Starkey coined the term blob working at Digital Equipment Corporation to refer to opaque data entities. The terminology was adopted for Rdb/VMS. Blob is often humorously explained to be an abbreviation for binary large object. According to Starkey, this backronym arose when Terry McKiever, working in marketing at Apollo Computer felt that the term needed to be an abbreviation. McKiever began using the expansion basic large object. This was later eclipsed by the retroactive explanation of blobs as binary large objects. According to Starkey, "Blob don't stand for nothin'." Rejecting the acronym, he explained his motivation behind the coinage, saying, "A blob is the thing that ate Cincinnatti [sic], Cleveland, or whatever", referring to the 1958 science fiction film The Blob. In 1995, research led by Garth Gibson on Network-Attached Secure Disks first promoted the concept of splitting less common operations, like namespace manipulations, from common operations, like reads and writes, to optimize the performance and scale of both. In the same year, a Belgian company – FilePool – was established to build the basis for archiving functions. Object storage was proposed at Gibson's Carnegie Mellon University lab as a research project in 1996. Another key concept was abstracting the writes and reads of data to more flexible data containers (objects). Fine grained access control through object storage architecture was further described by one of the NASD team, Howard Gobioff, who later was one of the inventors of the Google File System. Other related work includes the Coda filesystem project at Carnegie Mellon, which started in 1987, and spawned the Lustre file system. There is also the OceanStore project at UC Berkeley, which started in 1999 and the Logistical Networking project at the University of Tennessee Knoxville, which started in 1998. In 1999, Gibson founded Panasas to commercialize the concepts developed by the NASD team. === Development === Seagate Technology played a central role in the development of object storage. According to the Storage Networking Industry Association (SNIA), "Object storage originated in the late 1990s: Seagate specifications from 1999 Introduced some of the first commands and how operating system effectively removed from consumption of the storage." A preliminary version of the "OBJECT BASED STORAGE DEVICES Command Set Proposal" dated 10/25/1999 was submitted by Seagate as edited by Seagate's Dave Anderson and was the product of work by the National Storage Industry Consortium (NSIC) including contributions by Carnegie Mellon University, Seagate, IBM, Quantum, and StorageTek. This paper was proposed to INCITS T-10 (International Committee for Information Technology Standards) with a goal to form a committee and design a specification based on the SCSI interface protocol. This defined objects as abstracted data, with unique identifiers and metadata, how objects related to file systems, along with many other innovative concepts. Anderson presented many of these ideas at the SNIA conference in October 1999. The presentation revealed an IP Agreement that had been signed in February 1997 between the original collaborators (with Seagate represented by Anderson and Chris Malakapalli) and covered the benefits of object storage, scalable computing, platform independence, and storage management. == Architecture == === Abstraction of storage === One of the design principles of object storage is to abstract some of the lower layers of storage away from the administrators and applications. Thus, data is exposed and managed as objects instead of blocks or (exclusively) files. Objects contain additional descriptive properties which can be used for better indexing or management. Administrators do not have to perform lower-level storage functions like constructing and managing logical volumes to utilize disk capacity or setting RAID levels to deal with disk failure. Object storage also allows the addressing and identification of individual objects by more than just file name and file path. Object storage adds a unique identifier within a bucket, or across the entire system, to support much larger namespaces and eliminate name collisions. === Inclusion of rich custom metadata within the object === Object storage explicitly separates file metadata from data to support additional capabilities. As opposed to fixed metadata in file systems (filename, creation date, type, etc.), object storage provides for full function, custom, object-level metadata in order to: Capture application-specific or user-specific information for better indexing purposes Support data-management policies (e.g. a policy to drive object movement from one storage tier to another) Centralize management of storage across many individual nodes and clusters Optimize metadata storage (e.g. encapsulated, database or key value storage) and caching/indexing (when authoritative metadata is encapsulated with the metadata inside the object) independently from the data storage (e.g. unstructured binary storage) Additionally, in some object-based file-system implementations: The file system clients only contact metadata servers once when the file is opened and then get content directly via object-storage servers (vs. block-based file systems which would require constant metadata access) Data objects can be configured on a per-file basis to allow adaptive stripe width, even across multiple object-storage servers, supporting optimizations in bandwidth and I/O Object-based storage devices (OSD) as well as some software implementations (e.g., DataCore Swarm) manage metadata and data at the storage device level: Instead of providing a block-oriented interface that reads and writes fixed sized blocks of data, data is organized into flexible-sized data containers, called objects Each object has both data (an uninterpreted sequence of bytes) and metadata (an extensible set of attributes describing the object); physically encapsulating both together benefits recoverability. The command interface includes commands to create and delete objects, write bytes and read bytes to and from individual objects, and to set and get attributes on objects Security mechanisms provide per-object and per-command access control === Programmatic data management === Object storage provides programmatic interfaces to allow applications to manipulate data. At the base level, this includes Create, read, update and delete (CRUD) functions for basic read, write and delete operations. Some object storage implementations go further, supporting additional functionality like object/file versioning, object replication, life-cycle management and movement of objects between different tiers and types of storage. Most API implementations are REST-based, allowing the use of many standard HTTP calls. == Implementation == === Cloud storage === The vast majority of cloud storage available in the market leverages an object-storage architecture. Some notable examples are Amazon S3, which debuted in March 2006, Microsoft Azure Blob Storage, IBM Cloud Object Storage, Rackspace Cloud Files (whose code was donated in 2010 to Openstack project and released as OpenStack Swift), and Google Cloud Storage released in May 2010. === Object-based file systems === Some distributed file systems use an object-based architecture, where file metadata is stored in metadata servers and file data is stored i
Read more →
Pointer jumping

Pointer jumping or path doubling is a design technique for parallel algorithms that operate on pointer structures, such as linked lists and directed graphs. Pointer jumping allows an algorithm to follow paths with a time complexity that is logarithmic with respect to the length of the longest path. It does this by "jumping" to the end of the path computed by neighbors. The basic operation of pointer jumping is to replace each neighbor in a pointer structure with its neighbor's neighbor. In each step of the algorithm, this replacement is done for all nodes in the data structure, which can be done independently in parallel. In the next step when a neighbor's neighbor is followed, the neighbor's path already followed in the previous step is added to the node's followed path in a single step. Thus, each step effectively doubles the distance traversed by the explored paths. Pointer jumping is best understood by looking at simple examples such as list ranking and root finding. == List ranking == One of the simpler tasks that can be solved by a pointer jumping algorithm is the list ranking problem. This problem is defined as follows: given a linked list of N nodes, find the distance (measured in the number of nodes) of each node to the end of the list. The distance d(n) is defined as follows, for nodes n that point to their successor by a pointer called next: If n.next is nil, then d(n) = 0. For any other node, d(n) = d(n.next) + 1. This problem can easily be solved in linear time on a sequential machine, but a parallel algorithm can do better: given n processors, the problem can be solved in logarithmic time, O(log N), by the following pointer jumping algorithm: The pointer jumping occurs in the last line of the algorithm, where each node's next pointer is reset to skip the node's direct successor. It is assumed, as in common in the PRAM model of computation, that memory access are performed in lock-step, so that each n.next.next memory fetch is performed before each n.next memory store; otherwise, processors may clobber each other's data, producing inconsistencies. The following diagram follows how the parallel list ranking algorithm uses pointer jumping for a linked list with 11 elements. As the algorithm describes, the first iteration starts initialized with all ranks set to 1 except those with a null pointer for next. The first iteration looks at immediate neighbors. Each subsequent iteration jumps twice as far as the previous. Analyzing the algorithm yields a logarithmic running time. The initialization loop takes constant time, because each of the N processors performs a constant amount of work, all in parallel. The inner loop of the main loop also takes constant time, as does (by assumption) the termination check for the loop, so the running time is determined by how often this inner loop is executed. Since the pointer jumping in each iteration splits the list into two parts, one consisting of the "odd" elements and one of the "even" elements, the length of the list pointed to by each processor's n is halved in each iteration, which can be done at most O(log N) time before each list has a length of at most one. == Root finding == Following a path in a graph is an inherently serial operation, but pointer jumping reduces the total amount of work by following all paths simultaneously and sharing results among dependent operations. Pointer jumping iterates and finds a successor — a vertex closer to the tree root — each time. By following successors computed for other vertices, the traversal down each path can be doubled every iteration, which means that the tree roots can be found in logarithmic time. Pointer doubling operates on an array successor with an entry for every vertex in the graph. Each successor[i] is initialized with the parent index of vertex i if that vertex is not a root or to i itself if that vertex is a root. At each iteration, each successor is updated to its successor's successor. The root is found when the successor's successor points to itself. The following pseudocode demonstrates the algorithm. algorithm Input: An array parent representing a forest of trees. parent[i] is the parent of vertex i or itself for a root Output: An array containing the root ancestor for every vertex for i ← 1 to length(parent) do in parallel successor[i] ← parent[i] while true for i ← 1 to length(successor) do in parallel successor_next[i] ← successor[successor[i]] if successor_next = successor then break for i ← 1 to length(successor) do in parallel successor[i] ← successor_next[i] return successor The following image provides an example of using pointer jumping on a small forest. On each iteration the successor points to the vertex following one more successor. After two iterations, every vertex points to its root node. == History and examples == Although the name pointer jumping would come later, JáJá attributes the first uses of the technique in early parallel graph algorithms and list ranking. The technique has been described with other names such as shortcutting, but by the 1990s textbooks on parallel algorithms consistently used the term pointer jumping. Today, pointer jumping is considered a software design pattern for operating on recursive data types in parallel. As a technique for following linked paths, graph algorithms are a natural fit for pointer jumping. Consequently, several parallel graph algorithms utilizing pointer jumping have been designed. These include algorithms for finding the roots of a forest of rooted trees, connected components, minimum spanning trees, and biconnected components. However, pointer jumping has also shown to be useful in a variety of other problems including computer vision, image compression, and Bayesian inference.
Read more →
Webometrics Ranking of Business Schools

The Webometrics Ranking of Business Schools, also known as Ranking Web of Business Schools, is a ranking system for the world's business schools based on a composite indicator that takes into account both the volume of the Web content (number of web pages and files) and the visibility and impact of these web publications according to the number of external inlinks (site citations) they received. The ranking is published by the Cybermetrics Lab, a research group of the Spanish National Research Council (CSIC) located in Madrid. This ranking was discontinued in 2013 and is no longer updated. This discontinued ranking is, however, often cited (as of 2017-06-16) by Google as its main ranking reference. Examples are: "Spain business school ranking " = "Zurich business school ranking" etc. The Webometrics Ranking of World Universities is a similar ranking of universities.
Read more →
Micro stuttering

Micro stuttering is a visual artifact in real-time computer graphics in which the time intervals between consecutively displayed frames are uneven, even though the average frame rate reported by benchmarking software appears adequate. Tools such as 3DMark typically compute frame rates over intervals of one second or more, which can conceal momentary drops in the instantaneous frame rate that the viewer perceives as hitching or jerking of on-screen motion. At low frame rates the effect is visible as a stutter in moving images, degrading the experience in interactive applications such as video games. In severe cases a lower but more consistent frame rate can appear smoother than a higher but more erratic one. The term gained prominence in the late 2000s in discussions of multi-GPU rendering (see History), but micro stuttering also affects single-GPU systems. Common causes on modern hardware include real-time shader compilation, asset streaming from storage, VRAM exhaustion, and driver bugs. == Causes == === Shader compilation === A common cause of micro stuttering on modern PCs is real-time shader compilation. Shaders are small programs that instruct the GPU on how to render visual effects such as lighting, shadows, and reflections. On consoles, developers can pre-compile all shaders for the known, fixed hardware. On PCs, the variety of GPU architectures means shaders must often be compiled at run time, either when the game launches or during gameplay itself. When the rendering engine encounters a shader that has not yet been compiled, the CPU must finish the compilation before the GPU can draw the affected object. This causes a spike in frame time that the player perceives as a hitch. The problem has been particularly associated with games built on Unreal Engine 4 running under DirectX 12, because DX12 shifts more shader management responsibility to the application. Several techniques exist to reduce shader compilation stutter. Pipeline State Object (PSO) pre-caching records the shader permutations used at runtime so that they can be compiled in advance on subsequent launches. Asynchronous shader compilation moves the work to background CPU threads to avoid blocking the main rendering thread. Platform-level services such as Steam's shader pre-caching distribute previously compiled shaders to users with matching GPU hardware. The Steam Deck, which contains a single fixed GPU, benefits from pre-compiled shader caches because all units share the same hardware configuration. === Other causes === Micro stuttering on single-GPU systems can have several additional causes. CPU bottlenecks or scheduling interruptions from background tasks can prevent the processor from preparing frames at regular intervals. Asset streaming during gameplay (loading textures, geometry, or audio from storage) can produce hitches sometimes called traversal stutter; the use of solid-state drives and technologies such as DirectStorage has reduced but not eliminated this. VRAM exhaustion forces data to be swapped between video memory and system memory over the PCI Express bus, which is slower. Graphics driver bugs can also introduce stutter; Nvidia released hotfix driver 551.46 in February 2024 to correct intermittent micro stuttering when V-Sync was enabled. == Measurement == Micro stuttering drew attention to the limitations of average frame rate as a performance metric. In 2013, Scott Wasson at The Tech Report published a series of articles advocating frame time analysis, in which the delivery time of every individual frame is recorded and plotted rather than collapsed into a single frames-per-second figure. This approach was adopted by other hardware review publications in the following years. GPU reviews now routinely report 1% low and 0.1% low frame rates alongside the average. The 1% low is the average frame rate of the slowest 1% of frames in a sample; it serves as an indicator of worst-case smoothness. A large gap between the average and the 1% low suggests poor frame pacing. Tools for capturing per-frame timing data include FRAPS, PresentMon, OCAT, CapFrameX, and MSI Afterburner with RivaTuner Statistics Server. == Mitigation == === Frame pacing === Frame pacing is a software technique that regulates the timing of frame delivery to produce even intervals between displayed frames. Game engines, GPU drivers, and platform libraries all implement frame pacing strategies to varying degrees. On mobile platforms, Google provides the Android Frame Pacing library (Swappy) as part of the Android Game Development Kit. In December 2025, the Khronos Group published the VK_EXT_present_timing Vulkan extension, giving developers explicit control over presentation timing in a cross-platform graphics API for the first time. === Variable refresh rate === Variable refresh rate (VRR) display technologies allow a monitor's refresh rate to change to match the GPU's frame output. Implementations include Nvidia G-Sync (2013), AMD FreeSync (2015), and the VESA Adaptive-Sync standard built into DisplayPort 1.2a and later. VRR eliminates the screen tearing that results from a mismatch between frame rate and refresh rate, and avoids the frame-holding behaviour of V-Sync that can itself cause stutter. It is effective at smoothing moderate frame rate fluctuations but cannot compensate for large sudden spikes in frame time such as those caused by shader compilation or heavy asset streaming. VRR support has become standard in gaming monitors, televisions (via HDMI 2.1), and the Xbox Series X/S and PlayStation 5 consoles. === Frame generation === Beginning with DLSS 3 on the GeForce RTX 40 series in 2022, Nvidia introduced AI-based frame generation, which uses dedicated optical flow hardware and a neural network to create new frames between traditionally rendered ones. AMD followed with FSR 3 in 2023, using an algorithmic approach, and the AI-based FSR 4 for the Radeon RX 9000 series in 2025. DLSS 4, released in January 2025 for the GeForce RTX 50 series, can generate up to three frames per rendered frame using a technique called Multi Frame Generation. Frame generation increases the displayed frame rate but introduces its own frame pacing concerns. If the underlying rendered frames are unevenly timed, the interpolated frames can make the unevenness more apparent rather than less. DLSS 4 addresses this with hardware-level flip metering on the GPU's display engine, which controls the timing of frame presentation more precisely than the CPU-based pacing used in DLSS 3. Both vendors pair frame generation with latency-reduction features (Nvidia Reflex and AMD Anti-Lag+) to offset the additional input latency that results from inserting synthetic frames into the pipeline. === Frame rate limiters === Capping the frame rate below the display's maximum refresh rate, using tools such as RivaTuner Statistics Server, in-game limiters, or driver-level settings, is a common way to improve frame pacing. Preventing the GPU from running ahead of the display reduces variability in frame delivery times and can produce a smoother result than an uncapped but more irregular frame rate. == History == === Multi-GPU configurations === Micro stuttering was first widely documented in the late 2000s as a side effect of multi-GPU configurations using Alternate Frame Rendering (AFR), in which consecutive frames are assigned to alternating GPUs. Because each GPU may take a different amount of time to complete its assigned frame — due to varying scene complexity, driver scheduling, or inter-GPU communication overhead — the resulting frame delivery is irregular even when the average frame rate is high. Both Nvidia SLI and AMD CrossFireX were affected, with dual-GPU setups exhibiting the worst frame pacing irregularities. In 2012 benchmarks using Battlefield 3, dual Radeon HD 7970 cards in CrossFire showed 85% variation in frame delivery times compared with 7% for a single card, while dual GeForce GTX 680 cards in SLI showed only 7% variation compared with 5% for a single card. Multi-GPU micro stuttering became a significant factor in the eventual decline and discontinuation of consumer multi-GPU gaming. Nvidia restricted SLI to a handful of enthusiast-class cards from the GeForce 10 series onward, then replaced it with NVLink on the GeForce RTX 20 series, which saw limited gaming adoption. AMD ceased active CrossFire development around 2017. By the mid-2020s, neither vendor's current consumer GPUs support multi-GPU rendering for games. Other factors that contributed to the decline include DirectX 12 placing multi-GPU support in the hands of game developers rather than driver authors, the incompatibility of temporal anti-aliasing and other temporal rendering techniques with AFR, and the increasing size, power draw, and cost of individual GPUs. The third-party utility RadeonPro could reduce CrossFire micro stuttering through dynamic V-Sync and frame pacing adjustments, and AMD later introduced a driver-level frame paci
Read more →
ArchiMate

ArchiMate ( AR-ki-mayt) is an open and independent enterprise architecture modeling language to support the description, analysis and visualization of architecture within and across business domains in an unambiguous way. ArchiMate is a technical standard from The Open Group and is based on concepts from the now superseded IEEE 1471 standard. It is supported by various tool vendors and consulting firms. ArchiMate is also a registered trademark of The Open Group. The Open Group has a certification program for ArchiMate users, software tools and courses. ArchiMate distinguishes itself from other languages such as Unified Modeling Language (UML) and Business Process Modeling and Notation (BPMN) by its enterprise modelling scope. Also, UML and BPMN are meant for a specific use and they are quite heavy – containing about 150 (UML) and 250 (BPMN) modeling concepts whereas ArchiMate works with just about 50 (in version 2.0). The goal of ArchiMate is to be ”as small as possible”, not to cover every edge scenario imaginable. To be easy to learn and apply, ArchiMate was intentionally restricted “to the concepts that suffice for modeling the proverbial 80% of practical cases". == Overview == ArchiMate offers a common language for describing the construction and operation of business processes, organizational structures, information flows, IT systems, and technical infrastructure. This insight helps the different stakeholders to design, assess, and communicate the consequences of decisions and changes within and between these business domains. The main concepts and relationships of the ArchiMate language can be seen as a framework, the so-called Archimate Framework: It divides the enterprise architecture into a business, application and technology layer. In each layer, three aspects are considered: active elements, an internal structure and elements that define use or communicate information. One of the objectives of the ArchiMate language is to define the relationships between concepts in different architecture domains. The concepts of this language therefore hold the middle between the detailed concepts, which are used for modeling individual domains (for example, the Unified Modeling Language (UML) for modeling software products), and Business Process Model and Notation (BPMN), which is used for business process modeling. == History == ArchiMate is partly based on the now superseded IEEE 1471 standard. It was developed in the Netherlands by a project team from the Telematica Instituut in cooperation with several Dutch partners from government, industry and academia. Among the partners were Ordina NV, Radboud Universiteit Nijmegen, the Leiden Institute for Advanced Computer Science (LIACS) and the Centrum Wiskunde & Informatica (CWI). Later, tests were performed in organizations such as ABN AMRO, the Dutch Tax and Customs Administration and the ABP. The development process lasted from July 2002 to December 2004, and took about 35 person years and approximately 4 million euros. The development was funded by the Dutch government (Dutch Tax and Customs Administration), and business partners, including ABN AMRO and the ABP Pension Fund. In 2008 the ownership and stewardship of ArchiMate was transferred to The Open Group. It is now managed by the ArchiMate Forum within The Open Group. In February 2009 The Open Group published the ArchiMate 1.0 standard as a formal technical standard. In January 2012 the ArchiMate 2.0 standard, and in 2013 the ArchiMate 2.1 standard was released. In June 2016, the Open Group released version 3.0 of the ArchiMate Specification. An update to Archimate 3.0.1 came out in August 2017. Archimate 3.1 was published 5 November 2019. The latest version of the ArchiMate Specification is version 3.2 released October 2022. Version 3.0 adds enhanced support for capability-oriented strategic modelling, new entities representing physical resources (for modelling the ingredients, equipment and transport resources used in the physical world) and a generic metamodel showing the entity types and the relationships between them. == ArchiMate framework == === Core framework === The main concepts and elements of the ArchiMate language are being presented as ArchiMate core framework. It consists of three layers and three aspects. This creates a matrix of combinations. Every layer has its passive structure, behavior and active structure aspects. ==== Layers ==== ArchiMate has a layered and service-oriented look on architectural models. The higher layers make use of services that are provided by the lower layers. Although, at an abstract level, the concepts that are used within each layer are similar, we define more concrete concepts that are specific for a certain layer. In this context, we distinguish three main layers: The business layer is about business processes, services, functions and events of business units. This layer "offers products and services to external customers, which are realized in the organization by business processes performed by business actors and roles". The application layer is about software applications that "support the components in the business with application services". The technology layer deals "with the hardware and communication infrastructure to support the application layer. This layer offers infrastructural services needed to run applications, realized by computer and communication hardware and system software". Each of these main layers can be further divided in sub-layers. For example, in the business layer, the primary business processes realising the products of a company may make use of a layer of secondary (supporting) business processes; in the application layer, the end-user applications may make use of generic services offered by supporting applications. On top of the business layer, a separate environment layer may be added, modelling the external customers that make use of the services of the organisation (although these may also be considered part of the business layer). In line with service orientation, the most important relation between layers is formed by use relations, which show how the higher layers make use of the services of lower layers. However, a second type of link is formed by realisation relations: elements in lower layers may realise comparable elements in higher layers; e.g., a ‘data object’ (application layer) may realise a ‘business object’ (business layer); or an ‘artifact’ (technology layer) may realise either a ‘data object’ or an ‘application component’ (application layer). ==== Aspects ==== Passive structure is the set of entities on which actions are conducted. In the business layer the example would be information objects, in the application layer data objects and in the technology layer, they could include physical objects. Behavior refers to the processes and functions performed by the actors. "Structural elements are assigned to behavioral elements, to show who or what displays the behavior". Active structure is the set of entities that display some behavior, e.g. business actors, devices, or application components. === Full framework === The Full ArchiMate framework is enriched by the physical layer, which was added to allow modeling of “physical equipment, materials, and distribution networks” and was not present in the previous version. The implementation and migration layer adds elements that allow architects to model a state of transition, to mark parts of the architecture that are temporary for the purpose, as the name says, of implementation and migration. Strategy layer adds three elements: resource, capability and course of action. These elements help to incorporate strategic dimension to the ArchiMate language by allowing it to depict the usage of resources and capabilities in order to achieve some strategic goals. Finally, there is a motivation aspect that allows different stakeholders to describe the motivation of specific actors or domains, which can be quite important when looking at one thing from several different angles. It adds several elements like stakeholder, value, driver, goal, meaning etc. == ArchiMate language == The ArchiMate language is formed as a top-level and is hierarchical. On the top, there is a model. A model is a collection of concepts. A concept can be either an element or a relationship. An element can be either of behavior type, structure, motivation or a so-called composite element (which means that it does not fit just one aspect of the framework, but two or more). The functionality of all concepts without a dependency on a specific layer is described by the generic metamodel. This layer-independent description of concepts is useful when trying to understand the mechanics of the Archimate language. === Concepts === ==== Elements ==== The generic elements are distributed into the same categories as the layers: Active structure elements Behavior elements Passive structure elements Motivation elements Active structure e
Read more →
Recording format

A recording format is a format for encoding data for storage on a storage medium. The format can be container information such as sectors on a disk, or user/audience information (content) such as analog stereo audio. Multiple levels of encoding may be achieved in one format. For example, a text encoded page may contain HTML and XML encoding, combined in a plain text file format, using either EBCDIC or ASCII character encoding, on a UDF digitally formatted disk. In electronic media, the primary format is the encoding that requires hardware to interpret (decode) data; while secondary encoding is interpreted by secondary signal processing methods, usually computer software. == Recording container formats == A container format is a system for dividing physical storage space or virtual space for data. Data space can be divided evenly by a system of measurement, or divided unevenly with meta data. A grid may divide physical or virtual space with physical or virtual (dividers) borders, evenly or unevenly. Just as a physical container (such as a file cabinet) is divided by physical borders (such as drawers and file folders), data space is divided by virtual borders. Meta data such as a unit of measurement, address, or meta tags act as virtual borders in a container format. A template may be considered an abstract format for containing a solution as well as the content itself. Systems of measurement Metric system Geographic coordinate system Page grid Film formats Audio data format Video tape format Disk format File format Meta data Text formatting Template Data structure == Raw content formats == A raw content format is a system of converting data to displayable information. Raw content formats may either be recorded in secondary signal processing methods such as a software container format (e.g. digital audio, digital video) or recorded in the primary format. A primary raw content format may be directly observable (e.g. image, sound, motion, smell, sensation) or physical data which only requires hardware to display it, such as a phonographic needle and diaphragm or a projector lamp and magnifying glass.
Read more →
Driver scheduling problem

The driver scheduling problem (DSP) is type of problem in operations research and theoretical computer science. The DSP consists of selecting a set of duties (assignments) for the drivers or pilots of vehicles (e.g., buses, trains, boats, or planes) involved in the transportation of passengers or goods, within the constraints of various legislative and logistical criteria. == Criteria and modelling == This very complex problem involves several constraints related to labour and company rules and also different evaluation criteria and objectives. Being able to solve this problem efficiently can have a great impact on costs and quality of service for public transportation companies. There is a large number of different rules that a feasible duty might be required to satisfy, such as Minimum and maximum stretch duration Minimum and maximum break duration Minimum and maximum work duration Minimum and maximum total duration Maximum extra work duration Maximum number of vehicle changes Minimum driving duration of a particular vehicle Operations research has provided optimization models and algorithms that lead to efficient solutions for this problem. Among the most common models proposed to solve the DSP are the Set Covering and Set Partitioning Models (SPP/SCP). In the SPP model, each work piece (task) is covered by only one duty. In the SCP model, it is possible to have more than one duty covering a given work piece. In both models, the set of work pieces that needs to be covered is laid out in rows, and the set of previously defined feasible duties available for covering specific work pieces is arranged in columns. The DSP resolution, based on either of these models, is the selection of the set of feasible duties that guarantees that there is one (SPP) or more (SCP) duties covering each work piece while minimizing the total cost of the final schedule.
Read more →
Lessac Technologies

Lessac Technologies, Inc. (LTI) is an American firm which develops voice synthesis software, licenses technology and sells synthesized novels as MP3 files. The firm currently has seven patents granted and three more pending for its automated methods of converting digital text into human-sounding speech, more accurately recognizing human speech and outputting the text representing the words and phrases of said speech, along with recognizing the speaker's emotional state. The LTI technology is partly based on the work of the late Arthur Lessac, a Professor of Theater at the State University of New York and the creator of Lessac Kinesensic Training, and LTI has licensed exclusive rights to exploit Arthur Lessac's copyrighted works in the fields of speech synthesis and speech recognition. Based on the view that music is speech and speech is music, Lessac's work and books focused on body and speech energies and how they go together. Arthur Lessac's textual annotation system, which was originally developed to assist actors, singers, and orators in marking up scripts to prepare for performance, is adapted in LTI's speech synthesis system as the basic representation of the speech to be synthesized (Lessemes), in contrast to many other systems which use a phonetic representation. LTI's software has two major components: (1) a linguistic front-end that converts plain text to a sequence of prosodic and phonosensory graphic symbols (Lessemes) based on Arthur Lessac's annotation system, which specify the speech units to be synthesized; (2) a signal-processing back-end that takes the Lessemes as acoustic data and produces human-sounding synthesized speech as output, using unit selection and concatenation. LTI's text-to-speech system came in second in the world-wide Blizzard Challenge 2011 and 2012. The first-place team in 2011 also employed LTI's "front-end" technology, but with its own back-end. The Blizzard Challenge, conducted by the Language Technologies Institute of Carnegie Mellon University, was devised as a way to evaluate speech synthesis techniques by having different research groups build voices from the same voice-actor recordings, and comparing the results through listening tests. LTI was founded in 2000 by H. Donald Wilson (chairman), a lawyer, LexisNexis entrepreneur and business associate of Arthur Lessac; and Gary A. Marple (chief inventor), after Marple suggested that Arthur Lessac's kinesensic voice training might be applicable to computational linguistics. After Wilson's death in 2006, his nephew John Reichenbach became the firm's CEO.
Read more →
Data (word)

The word data is most often used as a singular collective mass noun in educated everyday usage. However, due to the history and etymology of the word, considerable controversy has existed on whether it should be considered a mass noun used with verbs conjugated in the singular, or should be treated as the plural of the now-rarely-used datum. == Usage in English == In one sense, data is the plural form of datum. Datum actually can also be a count noun with the plural datums (see usage in datum article) that can be used with cardinal numbers (e.g., "80 datums"); data (originally a Latin plural) is not used like a normal count noun with cardinal numbers and can be plural with plural determiners such as these and many, or it can be used as a mass noun with a verb in the singular form. Even when a very small quantity of data is referenced (one number, for example), the phrase piece of data is often used, as opposed to datum. The debate over appropriate usage continues, but "data" as a singular form is far more common. In English, the word datum is still used in the general sense of "an item given". In cartography, geography, nuclear magnetic resonance and technical drawing, it is often used to refer to a single specific reference datum from which distances to all other data are measured. Any measurement or result is a datum, though data point is now far more common. Data is indeed most often used as a singular mass noun in educated everyday usage. Some major newspapers, such as The New York Times, use it either in the singular or plural. In The New York Times, the phrases "the survey data are still being analyzed" and "the first year for which data is available" have appeared within one day. The Wall Street Journal explicitly allows this usage in its style guide. The Associated Press style guide classifies data as a collective noun that takes the singular when treated as a unit but the plural when referring to individual items (e.g., "The data is sound" and "The data have been carefully collected"). In scientific writing, data is often treated as a plural, as in These data do not support the conclusions, but the word is also used as a singular mass entity like information (e.g., in computing and related disciplines). British usage now widely accepts treating data as singular in standard English, including everyday newspaper usage at least in non-scientific use. UK scientific publishing still prefers treating it as a plural. Some UK university style guides recommend using data for both singular and plural use, and others recommend treating it only as a singular in connection with computers. The IEEE Computer Society allows usage of data as either a mass noun or plural based on author preference, while IEEE in the editorial style manual indicates to always use the plural form. Some professional organizations and style guides require that authors treat data as a plural noun. For example, the Air Force Flight Test Center once stated that the word data is always plural, never singular.
Read more →
Interviewer effect

The interviewer effect (also called interviewer variance or interviewer error) is the distortion of response to an interviewer-administered data collection effort which results from differential reactions to the social style and personality of interviewers or to their presentation of particular questions. The use of fixed-wording questions is one method of reducing interviewer bias. Anthropological research and case-studies are also affected by the problem, which is exacerbated by the self-fulfilling prophecy, when the researcher is also the interviewer it is also any effect on data gathered from interviewing people that is caused by the behavior or characteristics (real or perceived) of the interviewer. Interviewer effects can also be associated with the characteristics of the interviewer, such as race. Whether black respondents are interviewed by white interviewers or black interviewers has a strong impact on their responses to both attitude questions and behavioral ones. In the latter case, for example, if black respondents are interviewed by black interviewers in pre-election surveys, they are more likely to actually vote in the upcoming election than if they are interviewed by white interviewers. Furthermore, the race of the interviewer can also affect answers to factual questions that might take the form of a test of how informed the respondent is. Black respondents in a survey of political knowledge, for example, get fewer correct answers to factual questions about politics when interviewed by white interviewers than when interviewed by black interviewers. This is consistent with the research literature on stereotype threat, which finds diminished test performance of potentially stigmatised groups when the interviewer or test supervisor is from a perceived higher status group. Interviewer effects can be mitigated somewhat by randomly assigning subjects to different interviewers, or by using tools such as computer-assisted telephone interviewing (CATI).
Read more →