AI Analytics Social Media

AI Analytics Social Media — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Tessellation (computer graphics)

In computer graphics, tessellation is the dividing of datasets of polygons (sometimes called vertex sets) presenting objects in a scene into suitable structures for rendering. Especially for real-time rendering, data is tessellated into triangles, for example in OpenGL 4.0 and Direct3D 11. == In graphics rendering == A key advantage of tessellation for realtime graphics is that it allows detail to be dynamically added and subtracted from a 3D polygon mesh and its silhouette edges based on control parameters (often camera distance). In previously leading realtime techniques such as parallax mapping and bump mapping, surface details could be simulated at the pixel level, but silhouette edge detail was fundamentally limited by the quality of the original dataset. In Direct3D 11 pipeline (a part of DirectX 11), the graphics primitive is the patch. The tessellator generates a triangle-based tessellation of the patch according to tessellation parameters such as the TessFactor, which controls the degree of fineness of the mesh. The tessellation, along with shaders such as a Phong shader, allows for producing smoother surfaces than would be generated by the original mesh. By offloading the tessellation process onto the GPU hardware, smoothing can be performed in real time. Tessellation can also be used for implementing subdivision surfaces, level of detail scaling and fine displacement mapping. OpenGL 4.0 uses a similar pipeline, where tessellation into triangles is controlled by the Tessellation Control Shader and a set of four tessellation parameters. == In computer-aided design == In computer-aided design the constructed design is represented by a boundary representation topological model, where analytical 3D surfaces and curves, limited to faces, edges, and vertices, constitute a continuous boundary of a 3D body. Arbitrary 3D bodies are often too complicated to analyze directly. So they are approximated (tessellated) with a mesh of small, easy-to-analyze pieces of 3D volume—usually either irregular tetrahedra, or irregular hexahedra. The mesh is used for finite element analysis. The mesh of a surface is usually generated per individual faces and edges (approximated to polylines) so that original limit vertices are included into mesh. To ensure that approximation of the original surface suits the needs of further processing, three basic parameters are usually defined for the surface mesh generator: The maximum allowed distance between the planar approximation polygon and the surface (known as "sag"). This parameter ensures that mesh is similar enough to the original analytical surface (or the polyline is similar to the original curve). The maximum allowed size of the approximation polygon (for triangulations it can be maximum allowed length of triangle sides). This parameter ensures enough detail for further analysis. The maximum allowed angle between two adjacent approximation polygons (on the same face). This parameter ensures that even very small humps or hollows that can have significant effect to analysis will not disappear in mesh. An algorithm generating a mesh is typically controlled by the above three and other parameters. Some types of computer analysis of a constructed design require an adaptive mesh refinement, which is a mesh made finer (using stronger parameters) in regions where the analysis needs more detail.
Read more →
VueScan

VueScan is a computer program for image scanning, especially of photographs, including negatives. It supports optical character recognition (OCR) of text documents. The software can be downloaded and used free of charge, but adds a watermark on scans until a license is purchased. == Purpose == VueScan is intended to work with a large number of image scanners, excluding specialised professional scanners such as drum scanners, on many computer operating systems (OS), even if drivers for the scanner are not available for the OS. These scanners are supplied with device drivers and software to operate them, included in their price. A 2014 review considered that the reasons to purchase VueScan are to allow older scanners not supported by drivers for newer operating systems to be used in more up-to-date systems and for better scanning and processing of photographs (prints; also slides and negatives when supported by scanners) than is afforded by manufacturers' software. The review did not report any advantages to VueScan's processing of documents over other software. The reviewer considered VueScan comparable to SilverFast, a similar program, with support for some specific scanners better in one or the other. Vuescan supports more scanners, with a single purchase giving access to the full range of both film and flatbed scanners, and costs less. The VueScan program can be used with its own drivers or with drivers supplied by the scanner manufacturer, if supported by the operating system. VueScan drivers can also be used without the VueScan program by application software that supports scanning directly, such as Adobe Photoshop, again enabling the use of scanners without current manufacturers' drivers. In 2019 when Apple released macOS Catalina, they removed support for running 32-bit programs, including 32-bit drivers for scanning equipment. In response, Hamrick released VueScan 9.7, effectively saving thousands of scanners from being rendered obsolete. == Overview == VueScan enables the user to modify and fine-tune the scanning parameters. The program uses its own independent method to interface with scanner hardware, and can support many older scanners under computer operating systems for which drivers are not available, allowing old scanners to be used with newer platforms that do not otherwise support them. VueScan supports an increasing number of scanners and digital cameras; 2,400 on Windows, 2,100 on Mac OS X and 1,900 on Linux in 2018. VueScan is supplied as one downloadable file for each operating system, which supports the full range of scanners. Without the purchase of a license, the program runs in fully functional demonstration mode, identical to Professional mode, except that watermarks are superimposed on saved and printed images. Purchase of a license removes the watermark. A standard license allows updates for one year; a professional license allows unlimited updates and provides some additional features. VueScan supports optical character recognition (OCR), with English included, and 32 additional language packages available on its website. In September 2011, VueScan co-developer Ed Hamrick said that he was selling US$3 million per year of VueScan licenses.
Read more →
Qlone

Qlone is a 3D scanning app based on photogrammetry for creation of 3D models on mobile devices. The resultant 3D models can be exported for external use. Qlone was featured at the Apple Worldwide Developers Conference in 2021. It was also featured on BBC Click. == Qlone features == === 3D scanning === 3D scanning with Qlone requires the use of an included mat design. The user prints the mat onto a sheet of paper, then places the object to be scanned in the centre of the mat. An augmented reality dome within the Qlone app guides the user through the subsequent scanning process. The iOS version of Qlone allows scanning without the mat. === 3D editing === Qlone's editing features allow users to adjust 3D scanned models using texture mapping, polygon mesh size simplification, digital sculpting, cleaning and smoothing, and artistic effects. === File export === Qlone exports directly to multiple 3D platforms including SketchFab, i.materialise, Lens Studio for Snapchat, Shapeways and CGTrader. Models can also be exported in different 3D formats for use in other 3D tools – OBJ, STL, FBX, USDZ, GLB (Binary gLTF), PLY, and X3D. == Use in Science, Education and Academia == Due to its inexpensive, simple and accessible nature for creating 3D models, Qlone was used in many academically educational and scientific research projects. The European Space Agency used Qlone to scan rocks in a Tele-Robotic rock collection experiment. Neurosurgeons from the University of Southern California and surgeons from Tulane University School of Medicine used Qlone to create 3D models of cadaveric specimens and anatomical models with the aim of increasing access to such components for enhancing anatomy training and allowing realistic surgical simulations for neurosurgeons and practitioners worldwide. Archaeologists from Texas A&M University used Qlone to create 3D replicas of artifacts and models and students from Vancouver iTech Preparatory Middle School used Qlone to create 3D scans of more than 100 artifacts from Fort Vancouver National Historic Site.
Read more →
Rapid prototyping

Rapid prototyping is a group of techniques used to quickly fabricate a scale model of a physical part or assembly using three-dimensional computer aided design (CAD) data. Construction of the part or assembly is usually done using 3D printing or "additive layer manufacturing" technology. The first methods for rapid prototyping became available in mid 1987 and were used to produce models and prototype parts. Today, they are used for a wide range of applications and are used to manufacture production-quality parts in relatively small numbers if desired without the typical unfavorable short-run economics. This economy has encouraged online service bureaus. Historical surveys of RP technology start with discussions of simulacra production techniques used by 19th-century sculptors. Some modern sculptors use the progeny technology to produce exhibitions and various objects. The ability to reproduce designs from a dataset has given rise to issues of rights, as it is now possible to interpolate volumetric data from 2D images. As with CNC subtractive methods, the computer-aided-design – computer-aided manufacturing CAD -CAM workflow in the traditional rapid prototyping process starts with the creation of geometric data, either as a 3D solid using a CAD workstation, or 2D slices using a scanning device. For rapid prototyping this data must represent a valid geometric model; namely, one whose boundary surfaces enclose a finite volume, contain no holes exposing the interior, and do not fold back on themselves. In other words, the object must have an "inside". The model is valid if for each point in 3D space the computer can determine uniquely whether that point lies inside, on, or outside the boundary surface of the model. CAD post-processors will approximate the application vendors' internal CAD geometric forms (e.g., B-splines) with a simplified mathematical form, which in turn is expressed in a specified data format which is a common feature in additive manufacturing: STL file format, a de facto standard for transferring solid geometric models to SFF machines. To obtain the necessary motion control trajectories to drive the actual SFF, rapid prototyping, 3D printing or additive manufacturing mechanism, the prepared geometric model is typically sliced into layers, and the slices are scanned into lines (producing a "2D drawing" used to generate trajectory as in CNC's toolpath), mimicking in reverse the layer-to-layer physical building process. == Application areas == Rapid prototyping is also commonly applied in software engineering to try out new business models and application architectures such as Aerospace, Automotive, Financial Services, Product development, and Healthcare. Aerospace design and industrial teams rely on prototyping in order to create new AM methodologies in the industry. Using SLA they can quickly make multiple versions of their projects in a few days and begin testing quicker. Rapid Prototyping allows designers/developers to provide an accurate idea of how the finished product will turn out before putting too much time and money into the prototype. 3D printing being used for Rapid Prototyping allows for Industrial 3D printing to take place. With this, you could have large-scale moulds to spare parts being pumped out quickly within a short period of time. == Types of Rapid Prototyping == Stereolithography (SLA) → a laser-cured photopolymer for materials such as thermoplastic-like photopolymers. Selective Laser Sintering (SLS) → a laser-sintered powder for materials such as Nylon or TPU. Direct Metal Laser Sintering (DMLS) → laser-sintered metal powder for materials like stainless steel, titanium, chrome, and aluminum. Fused Deposition Modeling (FDM) → fused extrusions of filaments like ABS, PC, and PPCU. Multi Jet Fusion (MJF) → it is an inkjet array selective fusing across bed of nylon powder for Black Nylon 12. PolyJet (PJET) → it is a uv-cured jetted photopolymer to work with acrylic-based and elastomeric photopolymers. Computer Numerical Controlled Machine (CNC) → it is used for manipulating engineering-grade thermoplastics and metals. Injection Molding (IM) → the injection is done using aluminum molds and it is used for thermoplastics, metals and liquid silicone rubber. Vacuum Casting→ is a manufacturing process used to create high-quality prototypes and small batches of parts. == History == In the 1970s, Joseph Henry Condon and others at Bell Labs developed the Unix Circuit Design System (UCDS), automating the laborious and error-prone task of manually converting drawings to fabricate circuit boards for the purposes of research and development. By the 1980s, U.S. policy makers and industrial managers were forced to take note that America's dominance in the field of machine tool manufacturing evaporated, in what was named the machine tool crisis. Numerous projects sought to counter these trends in the traditional CNC CAM area, which had begun in the US. Later when Rapid Prototyping Systems moved out of labs to be commercialized, it was recognized that developments were already international and U.S. rapid prototyping companies would not have the luxury of letting a lead slip away. The National Science Foundation was an umbrella for the National Aeronautics and Space Administration (NASA), the US Department of Energy, the US Department of Commerce NIST, the US Department of Defense, Defense Advanced Research Projects Agency (DARPA), and the Office of Naval Research coordinated studies to inform strategic planners in their deliberations. One such report was the 1997 Rapid Prototyping in Europe and Japan Panel Report in which Joseph J. Beaman founder of DTM Corporation [DTM RapidTool pictured] provides a historical perspective: The roots of rapid prototyping technology can be traced to practices in topography and photosculpture. Within TOPOGRAPHY Blanther (1892) suggested a layered method for making a mold for raised relief paper topographical maps .The process involved cutting the contour lines on a series of plates which were then stacked. Matsubara (1974) of Mitsubishi proposed a topographical process with a photo-hardening photopolymer resin to form thin layers stacked to make a casting mold. PHOTOSCULPTURE was a 19th-century technique to create exact three-dimensional replicas of objects. Most famously Francois Willeme (1860) placed 24 cameras in a circular array and simultaneously photographed an object. The silhouette of each photograph was then used to carve a replica. Morioka (1935, 1944) developed a hybrid photo sculpture and topographic process using structured light to photographically create contour lines of an object. The lines could then be developed into sheets and cut and stacked, or projected onto stock material for carving. The Munz (1956) Process reproduced a three-dimensional image of an object by selectively exposing, layer by layer, a photo emulsion on a lowering piston. After fixing, a solid transparent cylinder contains an image of the object. "The Origins of Rapid Prototyping - RP stems from the ever-growing CAD industry, more specifically, the solid modeling side of CAD. Before solid modeling was introduced in the late 1980's, three-dimensional models were created with wire frames and surfaces. But not until the development of true solid modeling could innovative processes such as RP be developed. Charles Hull, who helped found 3D Systems in 1986, developed the first RP process. This process, called stereolithography, builds objects by curing thin consecutive layers of certain ultraviolet light-sensitive liquid resins with a low-power laser. With the introduction of RP, CAD solid models could suddenly come to life". The technologies referred to as Solid Freeform Fabrication are what we recognize today as rapid prototyping, 3D printing or additive manufacturing: Swainson (1977), Schwerzel (1984) worked on polymerization of a photosensitive polymer at the intersection of two computer controlled laser beams. Ciraud (1972) considered magnetostatic or electrostatic deposition with electron beam, laser or plasma for sintered surface cladding. These were all proposed but it is unknown if working machines were built. Hideo Kodama of Nagoya Municipal Industrial Research Institute was the first to publish an account of a solid model fabricated using a photopolymer rapid prototyping system (1981). The first 3D rapid prototyping system relying on Fused Deposition Modeling (FDM) was made in April 1992 by Stratasys but the patent did not issue until June 9, 1992. Sanders Prototype, Inc introduced the first desktop inkjet 3D Printer (3DP) using an invention from August 4, 1992 (Helinski), Modelmaker 6Pro in late 1993 and then the larger industrial 3D printer, Modelmaker 2, in 1997. Z-Corp using the MIT 3DP powder binding for Direct Shell Casting (DSP) invented 1993 was introduced to the market in 1995. Even at that early date the technology was seen as having a place in manufacturing practice. A low resol
Read more →
Drush

Drush (DRUpal SHell) is a computer software shell-based application used to control, manipulate, and administer Drupal websites. == Details == Drush was originally developed by Arto Bendiken for Drupal 4.7. In May 2007, it was partly rewritten and redesigned for Drupal 5 by Franz Heinzmann. Drush is maintained by Moshe Weitzman with the support of Owen Barton, greg.1.anderson, jonhattan, Mark Sonnabaum, Jonathan Hedstrom and Christopher Gervais.
Read more →
Customer support

Customer support is a range of services to assist customers in making cost effective and correct use of a product. It includes assistance in planning, installation, training, troubleshooting, maintenance, upgrading, and disposal of a product. Regarding technology products such as mobile phones, televisions, computers, software products or other electronic or mechanical goods, it is termed technical support. It aims to ensure users can effectively operate the product and resolve any issues that may arise throughout its lifecycle. Support is delivered through various channels, including telephone, email, live chat, self-service knowledge bases, and social media. Research indicates that most customers attempt to resolve issues through self-service before contacting a representative. For products sold across multiple regions, support may be provided in several languages, as consumers tend to prefer assistance in their native language. Requirements for customer contact centres are defined in international standards such as ISO 18295.
Read more →
Seam carving

Seam carving (or liquid rescaling) is an algorithm for content-aware image resizing, developed by Shai Avidan, of Mitsubishi Electric Research Laboratories (MERL), and Ariel Shamir, of the Interdisciplinary Center and MERL. It functions by establishing a number of seams (paths of least importance) in an image and automatically removes seams to reduce image size or inserts seams to extend it. Seam carving also allows manually defining areas in which pixels may not be modified, and features the ability to remove whole objects from photographs. The purpose of the algorithm is image retargeting, which is the problem of displaying images without distortion on media of various sizes (cell phones, projection screens) using document standards, like HTML, that already support dynamic changes in page layout and text but not images. Image Retargeting was invented by Vidya Setlur, Saeko Takage, Ramesh Raskar, Michael Gleicher and Bruce Gooch in 2005. The work by Setlur et al. won the 10-year impact award in 2015. == Seams == Seams can be either vertical or horizontal. A vertical seam is a path of pixels connected from top to bottom in an image with one pixel in each row. A horizontal seam is similar with the exception of the connection being from left to right. The importance/energy function values a pixel by measuring its contrast with its neighbor pixels. == Process == The below example describes the process of seam carving: The seams to remove depends only on the dimension (height or width) one wants to shrink. It is also possible to invert step 4 so the algorithm enlarges in one dimension by copying a low energy seam and averaging its pixels with its neighbors. === Computing seams === Computing a seam consists of finding a path of minimum energy cost from one end of the image to another. This can be done via Dijkstra's algorithm, dynamic programming, greedy algorithm or graph cuts among others. ==== Dynamic programming ==== Dynamic programming is a programming method that stores the results of sub-calculations in order to simplify calculating a more complex result. Dynamic programming can be used to compute seams. If attempting to compute a vertical seam (path) of lowest energy, for each pixel in a row we compute the energy of the current pixel plus the energy of one of the three possible pixels above it. The images below depict a DP process to compute one optimal seam. Each square represents a pixel, with the top-left value in red representing the energy value of that pixel. The value in black represents the cumulative sum of energies leading up to and including that pixel. The energy calculation is trivially parallelized for simple functions. The calculation of the DP array can also be parallelized with some interprocess communication. However, the problem of making multiple seams at the same time is harder for two reasons: the energy needs to be regenerated for each removal for correctness and simply tracing back multiple seams can form overlaps. Avidan 2007 computes all seams by removing each seam iteratively and storing an "index map" to record all the seams generated. The map holds a "nth seam" number for each pixel on the image, and can be used later for size adjustment. If one ignores both issues however, a greedy approximation for parallel seam carving is possible. To do so, one starts with the minimum-energy pixel at one end, and keep choosing the minimum energy path to the other end. The used pixels are marked so that they are not picked again. Local seams can also be computed for smaller parts of the image in parallel for a good approximation. == Issues == The algorithm may need user-provided information to reduce errors. This can consist of painting the regions which are to be preserved. With human faces it is possible to use face detection. Sometimes the algorithm, by removing a low energy seam, may end up inadvertently creating a seam of higher energy. The solution to this is to simulate a removal of a seam, and then check the energy delta to see if the energy increases (forward energy). If it does, prefer other seams instead. == Implementations == Adobe Systems acquired a non-exclusive license to seam carving technology from MERL, and implemented it as a feature in Photoshop CS4, where it is called Content Aware Scaling. As the license is non-exclusive, other popular computer graphics applications (e. g. GIMP, digiKam, and ImageMagick) as well as some stand-alone programs (e. g. iResizer) also have implementations of this technique, some of which are released as free and open source software. There also exists an implementation for webpages. == Improvements and extensions == Better energy function and application to video by introducing 2D (time+1D) seams. Faster implementation on GPU. Application of this forward energy function to static images. Multi-operator: Combine with cropping and scaling. Much faster removal of multiple seams. Removing seams through neural deformation fields to extend to continuous domains like 3D scenes. A 2010 review of eight image retargeting methods found that seam carving produced output that was ranked among the worst of the tested algorithms. It was, however, a part of one of the highest-ranking algorithms: the multi-operator extension mentioned above (combined with cropping and scaling).
Read more →
Companion robot

A companion robot is a robot created to create real or apparent companionship for human beings. Target markets for companion robots include the elderly and single children. Companions robots are expected to communicate with non-experts in a natural and intuitive way. They offer a variety of functions, such as monitoring the home remotely, communicating with people, or waking people up in the morning. Their aim is to perform a wide array of tasks including educational functions, home security, diary duties, entertainment and message delivery services, etc. The idea of companionship with robots has already existed on science fictions of 1970s, like R2-D2. Starting from the late 20th century, companion robots became a reality, mostly as robotic pets. Besides entertainment purposes, interactive robots were also introduced as a personal service robot for elderly care around 2000. == Characteristics == Companion robots try to interact with users. They gather information about users based on their interactions and yield feedback. This procedure varies slightly based on their specific roles. For example, social-companion robots make simple conversations, while pet-companion robots mimic being real pets. == Types == Companion robots can perform a variety of tasks and they are produced in a specialized manner according to their purpose or target audience in order to increase convenience and end user satisfaction. === Social companion robots === Social companion robots are designed to provide companionship and be a solution for unwanted solitude. They often mimic adult human, child or pet behaviours appealing to the user base. Robots which are specifically devised for simple conversations, conveying emotions and respond to user feelings fall under this category. === Assistive companion robots === Assistive companion robots are aimed at people who require constant care because of age, disability or rehabilitation purposes. Such robots can help disadvantaged users with their daily tasks, act as reminders (e.g., for regular medication) and facilitate mobility in everyday actions. Assistive companion robots reduce the intensity of labour that should be performed by caretakers, nurses and legal guardians. === Educational companion robots === Educational companion robots perform tutorship for students, regardless of their ages, and can teach desired subjects with activities tailored for the user such as interactive assignments and games. Rather than replacing teachers and instructors, educational companion robots are aides to them. === Therapeutic companion robots === Designed for individuals coping with stress (PTSD in severe cases), anxiety and loneliness; therapeutic companion robots support users' emotional and mental wellbeing. Such robots can be utilized in hospitals and care facilities as well as dwellings where the distressed user may need the most help. Therapeutic companion robots bear a vast resemblance to assistive companion robots to the extent of being a branch of them; the nuance between these two types of companion robots is that the former is for long-term/lifetime usage while the latter is mostly for the duration of the therapy received by the user. === Pet companion robots === Pet companion robots are for individuals who seek an alternative to live pets as live animals demand a considerable amount of care and may not be eligible for people with allergies. These robots aim to be perfect imitations of a pet while diminishing the chore aspect of having one. === Entertainment companion robots === Entertainment companion robots are designed solely for entertainment and can provide numerous ways of entertainment, ranging from dancing to playing games with the user. People who would appreciate an individual to have fun with are the main audience of such products. === Personal assistant robots === Personal assistant robots help people with daily tasks, management, scheduling, reminding etc. Their area of activity can be offices as well as homes and public spaces. === Sex robots === Sex robots are anthropomorphic robotic sex dolls that have human-like movement or behavior, and some degree of artificial intelligence. As of 2026, although elaborately instrumented sex dolls have been created by a number of inventors, no fully animated sex robots yet exist. Simple devices have been created which can speak, make facial expressions, or respond to touch. There is controversy as to whether developing them would be morally justifiable. In 2015, robot ethicist Kathleen Richardson called for a ban on the creation of anthropomorphic sex robots with concerns about normalizing relationships with machines and reinforcing female dehumanization. Questions about their ethics, effects, and possible legal regulations have been discussed since then. == Examples == There are several companion robot prototypes, and these include Paro, CompanionAble, and EmotiRob, among others. === Paro === Paro is a pet-type robot system developed by Japan's National Institute of Advanced Industrial Science and Technology (AIST). The robot, which looked like a small harp seal, was designed as a therapeutic tool for use in hospitals and nursing homes. The robot is programmed to cry for attention and respond to its name. Experiments showed that Paro facilitated elderly residents to communicate with each other, which led to psychological improvements. === CompanionAble === This robot is classified as an FP 7 EU project. It is built to "cooperate with Ambient Assistive Living environment". The autonomous device, which is also built to support the elderly, helps its owner interact with smart home environment as well as caregivers. The robot functions as a mobile friend, by which natural interaction is possible via speech and the touchscreen to detect and track people at home. === EmotiRob === EmotiRob is developed in a robotics project which is the continuity of the MAPH (Active Media For the Handicap) project in emotion synthesis. The aim of the project was to maintain emotional interaction with children. EmotiRob designed in a way that a child can hold it in a his/her arms and with which he/she could interact by talking to it, and then the robot would express itself through body postures or facial expressions. It has cognitive capabilities, which are further extended so that the robot can have a natural linguistic interaction with its owner through the DRAGON speech-recognition software developed by a company called NUANCE. Such interaction is expected to facilitate a child's cognitive development and develop new learning patterns. === LOVOT === Lovot is a Japanese company robot whose only purpose is "to make you happy". It features over 50 sensors that mimic the behavior of a human baby or small pet, a 360° camera with a microphone, the ability to distinguish humans from objects, neoteny eyes, and an internal warmth of 30° celsius. An interactive Lovot Café was opened in Japan October 3, 2020. === NICOBO === Nicobo was developed by Panasonic and was influenced by the loneliness of lockdowns created as a measure of the COVID-19 pandemic. It was designed to appear vulnerable, which creates empathy in its owners. Nicobo's name derives from the Japanese word for "smile". It wags its tail, engages in baby talk, and stays as a housemate. === Hyodol === Hyodol is an advanced care robot designed to support the elderly by reminding them to take their medications and monitoring their movements to keep their guardians informed. Additionally, this innovative robot can detect and respond to the emotional states of its elderly users, adding a layer of personalized care. Hyodol is designed with the appearance and speech style of a 7-year-old Korean grandchild, featuring a soft fabric exterior and user interaction methods such as striking the head or patting the back. It is equipped with various sensors and wireless communication technologies to collect and process data, supporting mobile apps and PC web monitoring systems for remote monitoring from anywhere. In South Korea, approximately 10,000 Hyodol robots are deployed to the homes of elderly individuals living alone, providing essential support and companionship. Local governments, including provincial and county offices, have embraced Hyodol as a solution to address social challenges stemming from the country's rapidly aging society.Furthermore, the robot is widely utilized in the treatment of dementia patients at a university hospital in Gangwon province. Hyodol was honored with the Mobile World Congress (MWC) Global Mobile Awards (GLOMO) in the "Best Mobile Innovation for Connected Health and Wellbeing" category on February 29, 2024. === Moxie === Moxie was a companion robot for autistic children developed by a company called Embodied. Although it had limited motion, it presented itself as a lifelike avatar. It was designed to help the children learn emotional cognition, using remotely hosted large language models to direct its respons
Read more →
Zeuthen strategy

The Zeuthen strategy in cognitive science is a negotiation strategy used by some artificial agents. Its purpose is to measure the willingness to risk conflict. An agent will be more willing to risk conflict if it does not have much to lose in case that the negotiation fails. In contrast, an agent is less willing to risk conflict when it has more to lose. The value of a deal is expressed in its utility. An agent has much to lose when the difference between the utility of its current proposal and the conflict deal is high. When both agents use the monotonic concession protocol, the Zeuthen strategy leads them to agree upon a deal in the negotiation set. This set consists of all conflict free deals, which are individually rational and Pareto optimal, and the conflict deal, which maximizes the Nash product. The strategy was introduced in 1930 by the Danish economist Frederik Zeuthen. == Three key questions == The Zeuthen strategy answers three open questions that arise when using the monotonic concession protocol, namely: Which deal should be proposed at first? On any given round, who should concede? In case of a concession, how much should the agent concede? The answer to the first question is that any agent should start with its most preferred deal, because that deal has the highest utility for that agent. The second answer is that the agent with the smallest value of Risk(i,t) concedes, because the agent with the lowest utility for the conflict deal profits most from avoiding conflict. To the third question, the Zeuthen strategy suggests that the conceding agent should concede just enough raise its value of Risk(i,t) just above that of the other agent. This prevents the conceding agent to have to concede again in the next round. == Risk == Risk ( i , t ) = { 1 U i ( δ ( i , t ) ) = 0 U i ( δ ( i , t ) ) − U i ( δ ( j , t ) ) U i ( δ ( i , t ) ) otherwise {\displaystyle {\text{Risk}}(i,t)={\begin{cases}1&U_{i}(\delta (i,t))=0\\{\frac {U_{i}(\delta (i,t))-U_{i}(\delta (j,t))}{U_{i}(\delta (i,t))}}&{\text{otherwise}}\end{cases}}} Risk(i,t) is a measurement of agent i's willingness to risk conflict. The risk function formalizes the notion that an agent's willingness to risk conflict is the ratio of the utility that agent would lose by accepting the other agent's proposal to the utility that agent would lose by causing a conflict. Agent i is said to be using a rational negotiation strategy if at any step t + 1 that agent i sticks to his last proposal, Risk(i,t) > Risk(j,t). == Sufficient concession == If agent i makes a sufficient concession in the next step, then, assuming that agent j is using a rational negotiation strategy, if agent j does not concede in the next step, he must do so in the step after that. The set of all sufficient concessions of agent i at step t is denoted SC(i, t). == Minimal sufficient concession == δ ′ = arg ⁡ max δ ∈ S C ( A , t ) { U A ( δ ) } {\displaystyle \delta '=\arg \max _{\delta \in {SC(A,t)}}\{U_{A}(\delta )\}} is the minimal sufficient concession of agent A in step t. Agent A begins the negotiation by proposing δ ( A , 0 ) = arg ⁡ max δ ∈ N S U A ( δ ) {\displaystyle \delta (A,0)=\arg \max _{\delta \in {NS}}U_{A}(\delta )} and will make the minimal sufficient concession in step t + 1 if and only if Risk(A,t) ≤ Risk(B,t). Theorem If both agents are using Zeuthen strategies, then they will agree on δ = arg ⁡ max δ ′ ∈ N S { π ( δ ′ ) } , {\displaystyle \delta =\arg \max _{\delta '\in {NS}}\{\pi (\delta ')\},} that is, the deal which maximizes the Nash product. Proof Let δA = δ(A,t). Let δB = δ(B,t). According to the Zeuthen strategy, agent A will concede at step t {\displaystyle t} if and only if R i s k ( A , t ) ≤ R i s k ( B , t ) . {\displaystyle Risk(A,t)\leq Risk(B,t).} That is, if and only if U A ( δ A ) − U A ( δ B ) U A ( δ A ) ≤ U B ( δ B ) − U B ( δ A ) U B ( δ B ) {\displaystyle {\frac {U_{A}(\delta _{A})-U_{A}(\delta _{B})}{U_{A}(\delta _{A})}}\leq {\frac {U_{B}(\delta _{B})-U_{B}(\delta _{A})}{U_{B}(\delta _{B})}}} U B ( δ B ) ( U A ( δ A ) − U A ( δ B ) ) ≤ U A ( δ A ) ( U B ( δ B ) − U B ( δ A ) ) {\displaystyle U_{B}(\delta _{B})(U_{A}(\delta _{A})-U_{A}(\delta _{B}))\leq U_{A}(\delta _{A})(U_{B}(\delta _{B})-U_{B}(\delta _{A}))} U A ( δ A ) U B ( δ B ) − U A ( δ B ) U B ( δ B ) ≤ U A ( δ A ) U B ( δ B ) − U A ( δ A ) U B ( δ A ) {\displaystyle U_{A}(\delta _{A})U_{B}(\delta _{B})-U_{A}(\delta _{B})U_{B}(\delta _{B})\leq U_{A}(\delta _{A})U_{B}(\delta _{B})-U_{A}(\delta _{A})U_{B}(\delta _{A})} − U A ( δ B ) U B ( δ B ) ≤ − U A ( δ A ) U B ( δ A ) {\displaystyle -U_{A}(\delta _{B})U_{B}(\delta _{B})\leq -U_{A}(\delta _{A})U_{B}(\delta _{A})} U A ( δ A ) U B ( δ A ) ≤ U A ( δ B ) U B ( δ B ) {\displaystyle U_{A}(\delta _{A})U_{B}(\delta _{A})\leq U_{A}(\delta _{B})U_{B}(\delta _{B})} π ( δ A ) ≤ π ( δ B ) {\displaystyle \pi (\delta _{A})\leq \pi (\delta _{B})} Thus, Agent A will concede if and only if δ A {\displaystyle \delta _{A}} does not yield the larger product of utilities. Therefore, the Zeuthen strategy guarantees a final agreement that maximizes the Nash Product.
Read more →
Moving object detection

Moving object detection is a technique used in computer vision and image processing. Multiple consecutive frames from a video are compared by various methods to determine if any moving object is detected. Moving objects detection has been used for wide range of applications like video surveillance, activity recognition, road condition monitoring, airport safety, monitoring of protection along marine border, etc. == Definition == Moving object detection is to recognize the physical movement of an object in a given place or region. By acting segmentation among moving objects and stationary area or region, the moving objects' motion can be tracked and thus analyzed later. To achieve this, consider a video is a structure built upon single frames, moving object detection is to find the foreground moving target(s), either in each video frame or only when the moving target shows the first appearance in the video. == Traditional methods == Among all the traditional moving object detection methods, we could categorize them into four major approaches: Background subtraction, Frame differencing, Temporal Differencing, and Optical Flow. === Frame differencing === Instead of using traditional approach, to use image subtraction operator by subtracting second and images afterwards, the frame differencing method makes comparisons between two successive frames to detect moving targets. === Temporal differencing === The temporal differencing method identifies the moving object by applying pixel-wise difference method with two or three consecutive frames.
Read more →
Image translation

Image translation is the machine translation of images of printed text (posters, banners, menus, screenshots etc.). This is done by applying optical character recognition (OCR) technology to an image to extract any text contained in the image, and then have this text translated into a language of their choice, and the applying digital image processing on the original image to get the translated image with a new language. == General == Machine translation made available on the internet (web and mobile) is a notable advance in multilingual communication eliminating the need for an intermediary translator/interpreter, translating foreign texts still poses a problem to the user as they cannot be expected to be able to type the foreign text they wish to translate and understand. Manually entering the foreign text may prove to be a difficulty especially in cases where an unfamiliar alphabet is used from a script which user can't read, e.g. Cyrillic, Chinese, Japanese etc. for an English speaker or any speaker of a Latin-based language or vice versa. The technical advancements in OCR made it possible to recognize text from images. The possibility to use one's mobile device's camera to capture and extract printed text is also known as mobile OCR and was first introduced in Japanese manufactured mobile telephones in 2004. Using the handheld's camera one could take a picture of (a line of) text and have it extracted (digitalized) for further manipulation such as storing the information in their contacts list, as a web page address (URL) or text to use in an SMS/email message etc. Presently, mobile devices having a camera resolution of 2 megapixels or above with an auto-focus ability, often feature the text scanner service. Taking the text scanning facility one step further, image translation emerged, giving users the ability to capture text with their mobile phone's camera, extract the text, and have it translated in their own language. More and more applications emerged on this technology including Word Lens. After getting acquired by Google, it was made a part of Google Translate mobile app. Another simultaneous advancement in Image Processing, has also made it possible now to replace the text on the image with the translated text and create a new image altogether. == History == The development of the image translation service springs from the advances in OCR technology (miniaturization and reduction of memory resources consumed) enabling text scanning on mobile telephones. Among the first to announce mobile software capable of “reading” text using the mobile device's camera is International Wireless Inc. who in February 2003 released their “CheckPoint” and “WebPoint” applications. “CheckPoint” reads critical symbolic information on checks and is aimed at reducing losses that mobile merchants suffer from “bounced” checks by scanning the MICR number on the bottom of a check, while “WebPoint” enables the visual recognition and decoding of printed URL's, which are then opened by the device's web browser. The first commercial release of a mobile text scanner, however, took place in December 2004 when Vodafone and Sharp began selling the 902SH mobile which was the first to feature a 2 megapixel digital camera with optical zoom. Among the device's various multimedia features was the built-in text/bar code/QR code scanner. The text scanner function could handle up to 60 alphabetical characters simultaneously. The scanned text could be then sent as an email or SMS message, added as a dictionary entry or, in the case of scanned URLs, opened via the device's web browser. All subsequent Sharp mobiles feature the text scanner functionality. In September 2005, NEC Corporation and the Nara Institute of Science and Technology in Japan (NAIST) announced new software capable of transforming cameraphones into text scanners. The application differs substantially from similarly equipped mobile telephones in Japan (able to scan businesscards and small bits of text and use OCR to convert that to editable text or to URL addresses) by it ability to scan a whole page. The two companies, however, said they would not release the software commercially before the end of 2008. Combining the text scanner function with machine translation technology was first made by US company RantNetwork who in July 2007 started selling the Communilator, a machine translation application for mobile devices featuring the Image Translation functionality. Using the built-in camera, the mobile user could take a picture of some printed text, apply OCR to recognize the text and then translate it into any one of over 25 language available. In April 2008 Nokia showcased their Shoot-to-Translate application for the N73 model which is capable of taking a picture using the device's camera, extracting the text and then translating it. The application only offers Chinese to English translation, and does not handle large segments of text. Nokia said they are in the process of developing their Multiscanner product which, besides scanning text and business cards, would be able to translate between 52 languages. Again in April 2008, Korean company Unichal Inc. released their handheld Dixau text scanner capable of scanning and recognizing English text and then translating it into Korean using online translation tools such as Wikipedia or Google Translate. The device is connected to a PC or a laptop via the USB port. In February 2009, Bulgarian company Interlecta presented at the Mobile World Congress in Barcelona their mobile translator including image recognition and speech synthesis. The application handles all European languages along with Chinese, Japanese and Korean. The software connects to a server over the Internet to accomplish the image recognition and the translation. In May 2014, Google acquired Word Lens to improve the quality of visual and voice translation. It is able to scan text or picture with one's device and have it translated instantly. Since the OCR has been improving many companies or website started combining OCR and translation, to read the text from an image and show the translated text. In August 2018, an Indian company created ImageTranslate. It is able to read, translate and re-create the image in another language. As of late 2018, the tool added 13 new languages, including Arabic, Thai, Vietnamese, Hindi, and Bengali, significantly increasing its utility in Asia and the Middle East. This helps users translate photos already stored in their phone's gallery, not just live, real-time views. Currently, image translation is offered by the following companies: Google Translate app with camera ImageTranslate Yandex
Read more →
Cheekd

Cheekd is a dating app based in New York City. It was founded in 2010 by Lori Cheek. == History == The service debuted with the name "Cheek'd". Founder Lori Cheek appeared on the television program, Shark Tank in February 2014, but did not succeed in obtaining funding from any of the five judges. She said Cheek’d only had 1000 subscribers at that time. === Business card model === Cheek'd offered two plans, paid and free. For $25, subscribers got a set of 50 business cards that could be given out once someone caught their eye. Each card had a phrase, an online code, and a URL to the subscriber's account. Recipients could look up the giver's profile. In addition to purchasing cards, there was a $9.95 monthly membership fee. === Smartphone app === In 2015, the service's name changed from "Cheek'd" to "Cheekd". The new app used Bluetooth technology to alert users whenever a compatible user was within a 30-foot radius, instead of using cards. == Patent lawsuit == The original business card-based model for Cheekd had been claimed as a patented process by Lori Cheek, as U.S. patent 8,543,465. In September 2017, a complaint was filed, alleging that the idea was not original to Lori Cheek. Cheek responded, stating that the complaint was baseless, and a complete fabrication. The lawsuit Pirri v. Cheek was dismissed in a pre-trial conference in New York's Federal Court on April 5, 2018.
Read more →
Camera interface

The Camera Interface block or CAMIF is the hardware block that interfaces with different image sensor interfaces and provides a standard output that can be used for subsequent image processing. A typical Camera Interface would support at least a parallel interface although these days many camera interfaces are beginning to support the Mobile Industry Processor Interface (MIPI) Camera Serial Interface (CSI) interface. == Electrical connections == The camera interface's parallel interface consists of the following lines: 8 to 12 bits parallel data line These are parallel data lines that carry pixel data. The data transmitted on these lines change with every Pixel Clock (PCLK). Horizontal Sync (HSYNC) This is a special signal that goes from the camera sensor or ISP to the camera interface. An HSYNC indicates that one line of the frame is transmitted. Vertical Sync (VSYNC) This signal is transmitted after the entire frame is transferred. This signal is often a way to indicate that one entire frame is transmitted. Pixel Clock (PCLK) This is the pixel clock and it would change on every pixel. NOTE: The above lines are all treated as input lines to the Camera Interface hardware.
Read more →
Co–Star

Co–Star is an American astrological social networking service founded in 2017, and headquartered in New York City. Users enter the date, time and place they were born to generate an astrological chart and daily horoscopes, which can be compared with those of other users. == History == The concept for Co-Star began in 2015 when Banu Guler created an astrological chart as a gift. The idea later developed into a mobile application with collaborators Anna Kopp and Ben Weitzman. The app publicly launched in 2017. The app includes astrological readings, charts, and daily push notifications that have been noted for their unconventional tone. In early 2018, the company raised a $750,000 pre-seed round from Female Founders Fund. In 2019, Co–Star raised a $5.2 million seed round from Maveron, Aspect, and 14W. In January 2020, Co–Star for Android was launched to a 120,000-person waitlist—two years after their iOS version. In April 2021, the company announced a $15 million Series A, led by Spark Capital. As of that date, Co–Star reported more than 20 million downloads and increased adoption among young women in the United States. == Features == Co–Star employs artificial intelligence to analyze publicly accessible NASA JPL data and find patterns in a user's transits. Co–Star's algorithm maps human-written snippets of text to planetary movements to display personalized content for each user. That content has been called “slightly robotic,” “wildly beautiful,” “truly insane," “brutally honest,” and compared to “a free therapy session.” In July 2023, Co–Star released an in-app service called The Void that allows users to ask open-ended questions and receive answers informed by Co–Star's astrological database.
Read more →
HTK Limited

HTK Limited is a software-as-a-service company that provides mobile phone messaging and IVR services. Founded in 1996, HTK is headquartered in Ipswich, Suffolk, UK. HTK provide mass notification services. Specifically, the "Police Direct" messaging service to Suffolk and Norfolk Constabularies. In 2010 the HTK Horizon SaaS platform was selected by the Scottish Environment Protection Agency (SEPA) for their Floodline Warnings Direct service. == History == HTK was founded in 1996 by Marlon Bowser and Adrian Gregory and from the outset focused on what has now become commonly known as Software-as-a-Service. in 2004, according to the Deloitte Fast 50 (UK), HTK was the 17th fastest growing company in the East of England. In 2005 The Times listed HTK 65th nationally and 4th in the East of England in the Sunday Times & Microsoft "Tech Track 100" awards. In 2009 the company was approved as a supplier to UK Government under a new framework agreement. In 2010 HTK launched version 2.2 of its Horizon platform, with a feature set that signals a shift from mass notification into the customer service automation market.
Read more →