AI Analytics Summit

AI Analytics Summit — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Seam carving

  Seam carving (or liquid rescaling) is an algorithm for content-aware image resizing, developed by Shai Avidan, of Mitsubishi Electric Research Laboratories (MERL), and Ariel Shamir, of the Interdisciplinary Center and MERL. It functions by establishing a number of seams (paths of least importance) in an image and automatically removes seams to reduce image size or inserts seams to extend it. Seam carving also allows manually defining areas in which pixels may not be modified, and features the ability to remove whole objects from photographs. The purpose of the algorithm is image retargeting, which is the problem of displaying images without distortion on media of various sizes (cell phones, projection screens) using document standards, like HTML, that already support dynamic changes in page layout and text but not images. Image Retargeting was invented by Vidya Setlur, Saeko Takage, Ramesh Raskar, Michael Gleicher and Bruce Gooch in 2005. The work by Setlur et al. won the 10-year impact award in 2015. == Seams == Seams can be either vertical or horizontal. A vertical seam is a path of pixels connected from top to bottom in an image with one pixel in each row. A horizontal seam is similar with the exception of the connection being from left to right. The importance/energy function values a pixel by measuring its contrast with its neighbor pixels. == Process == The below example describes the process of seam carving: The seams to remove depends only on the dimension (height or width) one wants to shrink. It is also possible to invert step 4 so the algorithm enlarges in one dimension by copying a low energy seam and averaging its pixels with its neighbors. === Computing seams === Computing a seam consists of finding a path of minimum energy cost from one end of the image to another. This can be done via Dijkstra's algorithm, dynamic programming, greedy algorithm or graph cuts among others. ==== Dynamic programming ==== Dynamic programming is a programming method that stores the results of sub-calculations in order to simplify calculating a more complex result. Dynamic programming can be used to compute seams. If attempting to compute a vertical seam (path) of lowest energy, for each pixel in a row we compute the energy of the current pixel plus the energy of one of the three possible pixels above it. The images below depict a DP process to compute one optimal seam. Each square represents a pixel, with the top-left value in red representing the energy value of that pixel. The value in black represents the cumulative sum of energies leading up to and including that pixel. The energy calculation is trivially parallelized for simple functions. The calculation of the DP array can also be parallelized with some interprocess communication. However, the problem of making multiple seams at the same time is harder for two reasons: the energy needs to be regenerated for each removal for correctness and simply tracing back multiple seams can form overlaps. Avidan 2007 computes all seams by removing each seam iteratively and storing an "index map" to record all the seams generated. The map holds a "nth seam" number for each pixel on the image, and can be used later for size adjustment. If one ignores both issues however, a greedy approximation for parallel seam carving is possible. To do so, one starts with the minimum-energy pixel at one end, and keep choosing the minimum energy path to the other end. The used pixels are marked so that they are not picked again. Local seams can also be computed for smaller parts of the image in parallel for a good approximation. == Issues == The algorithm may need user-provided information to reduce errors. This can consist of painting the regions which are to be preserved. With human faces it is possible to use face detection. Sometimes the algorithm, by removing a low energy seam, may end up inadvertently creating a seam of higher energy. The solution to this is to simulate a removal of a seam, and then check the energy delta to see if the energy increases (forward energy). If it does, prefer other seams instead. == Implementations == Adobe Systems acquired a non-exclusive license to seam carving technology from MERL, and implemented it as a feature in Photoshop CS4, where it is called Content Aware Scaling. As the license is non-exclusive, other popular computer graphics applications (e. g. GIMP, digiKam, and ImageMagick) as well as some stand-alone programs (e. g. iResizer) also have implementations of this technique, some of which are released as free and open source software. There also exists an implementation for webpages. == Improvements and extensions == Better energy function and application to video by introducing 2D (time+1D) seams. Faster implementation on GPU. Application of this forward energy function to static images. Multi-operator: Combine with cropping and scaling. Much faster removal of multiple seams. Removing seams through neural deformation fields to extend to continuous domains like 3D scenes. A 2010 review of eight image retargeting methods found that seam carving produced output that was ranked among the worst of the tested algorithms. It was, however, a part of one of the highest-ranking algorithms: the multi-operator extension mentioned above (combined with cropping and scaling).

  Read more →
• 

  Tucker decomposition

  In mathematics, Tucker decomposition decomposes a tensor into a set of matrices and one small core tensor. It is named after Ledyard R. Tucker although it goes back to Hitchcock in 1927. Initially described as a three-mode extension of factor analysis and principal component analysis it may actually be generalized to higher mode analysis, which is also called higher-order singular value decomposition (HOSVD) or the M-mode SVD. The algorithm to which the literature typically refers when discussing the Tucker decomposition or the HOSVD is the M-mode SVD algorithm introduced by Vasilescu and Terzopoulos, but misattributed to Tucker or De Lathauwer etal. It may be regarded as a more flexible PARAFAC (parallel factor analysis) model. In PARAFAC the core tensor is restricted to be "diagonal". In practice, Tucker decomposition is used as a modelling tool. For instance, it is used to model three-way (or higher way) data by means of relatively small numbers of components for each of the three or more modes, and the components are linked to each other by a three- (or higher-) way core array. The model parameters are estimated in such a way that, given fixed numbers of components, the modelled data optimally resemble the actual data in the least squares sense. The model gives a summary of the information in the data, in the same way as principal components analysis does for two-way data. For a 3rd-order tensor T ∈ F n 1 × n 2 × n 3 {\displaystyle T\in F^{n_{1}\times n_{2}\times n_{3}}} , where F {\displaystyle F} is either R {\displaystyle \mathbb {R} } or C {\displaystyle \mathbb {C} } , Tucker Decomposition can be denoted as follows, T = T × 1 U ( 1 ) × 2 U ( 2 ) × 3 U ( 3 ) {\displaystyle T={\mathcal {T}}\times _{1}U^{(1)}\times _{2}U^{(2)}\times _{3}U^{(3)}} where T ∈ F d 1 × d 2 × d 3 {\displaystyle {\mathcal {T}}\in F^{d_{1}\times d_{2}\times d_{3}}} is the core tensor, a 3rd-order tensor that contains the 1-mode, 2-mode and 3-mode singular values of T {\displaystyle T} , which are defined as the Frobenius norm of the 1-mode, 2-mode and 3-mode slices of tensor T {\displaystyle {\mathcal {T}}} respectively. U ( 1 ) , U ( 2 ) , U ( 3 ) {\displaystyle U^{(1)},U^{(2)},U^{(3)}} are unitary matrices in F d 1 × n 1 , F d 2 × n 2 , F d 3 × n 3 {\displaystyle F^{d_{1}\times n_{1}},F^{d_{2}\times n_{2}},F^{d_{3}\times n_{3}}} respectively. The k-mode product (k = 1, 2, 3) of T {\displaystyle {\mathcal {T}}} by U ( k ) {\displaystyle U^{(k)}} is denoted as T × U ( k ) {\displaystyle {\mathcal {T}}\times U^{(k)}} with entries as ( T × 1 U ( 1 ) ) ( i 1 , j 2 , j 3 ) = ∑ j 1 = 1 d 1 T ( j 1 , j 2 , j 3 ) U ( 1 ) ( j 1 , i 1 ) ( T × 2 U ( 2 ) ) ( j 1 , i 2 , j 3 ) = ∑ j 2 = 1 d 2 T ( j 1 , j 2 , j 3 ) U ( 2 ) ( j 2 , i 2 ) ( T × 3 U ( 3 ) ) ( j 1 , j 2 , i 3 ) = ∑ j 3 = 1 d 3 T ( j 1 , j 2 , j 3 ) U ( 3 ) ( j 3 , i 3 ) {\displaystyle {\begin{aligned}({\mathcal {T}}\times _{1}U^{(1)})(i_{1},j_{2},j_{3})&=\sum _{j_{1}=1}^{d_{1}}{\mathcal {T}}(j_{1},j_{2},j_{3})U^{(1)}(j_{1},i_{1})\\({\mathcal {T}}\times _{2}U^{(2)})(j_{1},i_{2},j_{3})&=\sum _{j_{2}=1}^{d_{2}}{\mathcal {T}}(j_{1},j_{2},j_{3})U^{(2)}(j_{2},i_{2})\\({\mathcal {T}}\times _{3}U^{(3)})(j_{1},j_{2},i_{3})&=\sum _{j_{3}=1}^{d_{3}}{\mathcal {T}}(j_{1},j_{2},j_{3})U^{(3)}(j_{3},i_{3})\end{aligned}}} Altogether, the decomposition may also be written more directly as T ( i 1 , i 2 , i 3 ) = ∑ j 1 = 1 d 1 ∑ j 2 = 1 d 2 ∑ j 3 = 1 d 3 T ( j 1 , j 2 , j 3 ) U ( 1 ) ( j 1 , i 1 ) U ( 2 ) ( j 2 , i 2 ) U ( 3 ) ( j 3 , i 3 ) {\displaystyle T(i_{1},i_{2},i_{3})=\sum _{j_{1}=1}^{d_{1}}\sum _{j_{2}=1}^{d_{2}}\sum _{j_{3}=1}^{d_{3}}{\mathcal {T}}(j_{1},j_{2},j_{3})U^{(1)}(j_{1},i_{1})U^{(2)}(j_{2},i_{2})U^{(3)}(j_{3},i_{3})} Taking d i = n i {\displaystyle d_{i}=n_{i}} for all i {\displaystyle i} is always sufficient to represent T {\displaystyle T} exactly, but often T {\displaystyle T} can be compressed or efficiently approximately by choosing d i < n i {\displaystyle d_{i} Read more →

• 

  Optimal discriminant analysis and classification tree analysis

  Optimal Discriminant Analysis (ODA) and the related classification tree analysis (CTA) are exact statistical methods that maximize predictive accuracy. For any specific sample and exploratory or confirmatory hypothesis, optimal discriminant analysis (ODA) identifies the statistical model that yields maximum predictive accuracy, assesses the exact Type I error rate, and evaluates potential cross-generalizability. Optimal discriminant analysis may be applied to > 0 dimensions, with the one-dimensional case being referred to as UniODA and the multidimensional case being referred to as MultiODA. Optimal discriminant analysis is an alternative to ANOVA (analysis of variance) and regression analysis.

  Read more →
• 

  GNU Octave

  GNU Octave is a scientific programming language for scientific computing and numerical computation. Among other things, Octave can be used to solve linear and nonlinear problems numerically and to perform other numerical experiments using a language that is mostly compatible with MATLAB. It may also be used as a batch-oriented language. As part of the GNU Project, it is free software under the terms of the GNU General Public License. == History == The project was conceived around 1988. At first it was intended to be a companion to a chemical reactor design course. Full development was started by John W. Eaton in 1992. The first alpha release dates back to 4 January 1993 and on 17 February 1994 version 1.0 was released. Version 9.2.0 was released on 7 June 2024. The program is named after Octave Levenspiel, a former professor of the principal author. Levenspiel was known for his ability to perform quick back-of-the-envelope calculations. == Development history == == Developments == In addition to use on desktops for personal scientific computing, Octave is used in academia and industry. For example, Octave was used on a massive parallel computer at Pittsburgh Supercomputing Center to find vulnerabilities related to guessing social security numbers. Acceleration with OpenCL or CUDA is also possible with use of GPUs. == Technical details == Octave is written in C++ using the C++ standard library. Octave uses an interpreter to execute the Octave scripting language. Octave is extensible using dynamically loadable modules. Octave interpreter has an OpenGL-based graphics engine to create plots, graphs and charts and to save or print them. Alternatively, gnuplot can be used for the same purpose. Octave includes a graphical user interface (GUI) in addition to the traditional command-line interface (CLI); see #User interfaces for details. == Octave, the language == The Octave language is an interpreted programming language. It is a structured programming language (similar to C) and supports many common C standard library functions, and also certain UNIX system calls and functions. However, it does not support passing arguments by reference although function arguments are copy-on-write to avoid unnecessary duplication. Octave programs consist of a list of function calls or a script. The syntax is matrix-based and provides various functions for matrix operations. It supports various data structures and allows object-oriented programming. Its syntax is very similar to MATLAB, and careful programming of a script will allow it to run on both Octave and MATLAB. Because Octave is made available under the GNU General Public License, it may be freely changed, copied and used. The program runs on Microsoft Windows and most Unix and Unix-like operating systems, including Linux, Android, and macOS. == Notable features == === Command and variable name completion === Typing a TAB character on the command line causes Octave to attempt to complete variable, function, and file names (similar to Bash's tab completion). Octave uses the text before the cursor as the initial portion of the name to complete. === Command history === When running interactively, Octave saves the commands typed in an internal buffer so that they can be recalled and edited. === Data structures === Octave includes a limited amount of support for organizing data in structures. In this example, we see a structure x with elements a, b, and c, (an integer, an array, and a string, respectively): === Short-circuit Boolean operators === Octave's && and || logical operators are evaluated in a short-circuit fashion (like the corresponding operators in the C language), in contrast to the element-by-element operators & and |. === Increment and decrement operators === Octave includes the C-like increment and decrement operators ++ and -- in both their prefix and postfix forms. Octave also does augmented assignment, e.g. x += 5. === Unwind-protect === Octave supports a limited form of exception handling modelled after the unwind_protect of Lisp. The general form of an unwind_protect block looks like this: As a general rule, GNU Octave recognizes as termination of a given block either the keyword end (which is compatible with the MATLAB language) or a more specific keyword endblock or, in some cases, end_block. As a consequence, an unwind_protect block can be terminated either with the keyword end_unwind_protect as in the example, or with the more portable keyword end. The cleanup part of the block is always executed. In case an exception is raised by the body part, cleanup is executed immediately before propagating the exception outside the block unwind_protect. GNU Octave also supports another form of exception handling (compatible with the MATLAB language): This latter form differs from an unwind_protect block in two ways. First, exception_handling is only executed when an exception is raised by body. Second, after the execution of exception_handling the exception is not propagated outside the block (unless a rethrow( lasterror ) statement is explicitly inserted within the exception_handling code). === Variable-length argument lists === Octave has a mechanism for handling functions that take an unspecified number of arguments without explicit upper limit. To specify a list of zero or more arguments, use the special argument varargin as the last (or only) argument in the list. varargin is a cell array containing all the input arguments. === Variable-length return lists === A function can be set up to return any number of values by using the special return value varargout. For example: === C++ integration === It is also possible to execute Octave code directly in a C++ program. For example, here is a code snippet for calling rand([10,1]): C and C++ code can be integrated into GNU Octave by creating oct files, or using the MATLAB compatible MEX files. == MATLAB compatibility == Octave has been built with MATLAB compatibility in mind, and shares many features with MATLAB: % Script: myscript.m a = 5; b = a 2 % Function: myfunc.m function result = myfunc(x) result = x^2 + 3; end Matrices as fundamental data type. Built-in support for complex numbers. Powerful built-in math functions and extensive function libraries. Extensibility in the form of user-defined functions. Octave treats incompatibility with MATLAB as a bug; therefore, it could be considered a software clone, which does not infringe software copyright as per Lotus v. Borland court case. MATLAB scripts from the MathWorks' FileExchange repository in principle are compatible with Octave. However, while they are often provided and uploaded by users under an Octave compatible and proper open source BSD license, the FileExchange Terms of use prohibit any usage beside MathWorks' proprietary MATLAB. === Syntax compatibility === There are a few purposeful, albeit minor, syntax additions Archived 2012-04-26 at the Wayback Machine: Comment lines can be prefixed with the # character as well as the % character; Various C-based operators ++, --, +=, =, /= are supported; Elements can be referenced without creating a new variable by cascaded indexing, e.g. [1:10](3); Strings can be defined with the double-quote " character as well as the single-quote ' character; When the variable type is single (a single-precision floating-point number), Octave calculates the "mean" in the single-domain (MATLAB in double-domain) which is faster but gives less accurate results; Blocks can also be terminated with more specific Control structure keywords, i.e., endif, endfor, endwhile, etc.; Functions can be defined within scripts and at the Octave prompt; Presence of a do-until loop (similar to do-while in C). === Function compatibility === Many, but not all, of the numerous MATLAB functions are available in GNU Octave, some of them accessible through packages in Octave Forge. The functions available as part of either core Octave or Forge packages are listed online Archived 2024-03-14 at the Wayback Machine. A list of unavailable functions is included in the Octave function __unimplemented.m__. Unimplemented functions are also listed under many Octave Forge packages in the Octave Wiki. When an unimplemented function is called the following error message is shown: == User interfaces == Octave comes with an official graphical user interface (GUI) and an integrated development environment (IDE) based on Qt. It has been available since Octave 3.8, and has become the default interface (over the command-line interface) with the release of Octave 4.0. It was well-received by an EDN contributor, who wrote "[Octave] now has a very workable GUI" in reviewing the then-new GUI in 2014. Several 3rd-party graphical front-ends have also been developed, like ToolboX for coding education. == GUI applications == With Octave code, the user can create GUI applications. See GUI Development (GNU Octave (version 7.1.0)). Below are some examples: Button, edit control, checkboxTextboxListbox wit

  Read more →
• 

  Video imprint (computer vision)

  Proposed as an extension of image epitomes in the field of video content analysis, video imprint is obtained by recasting video contents into a fixed-sized tensor representation regardless of video resolution or duration. Specifically, statistical characteristics are retained to some degrees so that common video recognition tasks can be carried out directly on such imprints, e.g., event retrieval, temporal action localization. It is claimed that both spatio-temporal interdependences are accounted for and redundancies are mitigated during the computation of video imprints. The option of computing video imprints exploiting the epitome model has the advantage of more flexible input feature formats and more efficient training stage for video content analysis.

  Read more →
• 

  Ordination (statistics)

  Ordination or gradient analysis, in multivariate analysis, is a method complementary to data clustering, and used mainly in exploratory data analysis (rather than in hypothesis testing). In contrast to cluster analysis, ordination orders quantities in a (usually lower-dimensional) latent space. In the ordination space, quantities that are near each other share attributes (i.e., are similar to some degree), and dissimilar objects are farther from each other. Such relationships between the objects, on each of several axes or latent variables, are then characterized numerically and/or graphically in a biplot. The first ordination method, principal components analysis, was suggested by Karl Pearson in 1901. == Methods == Ordination methods can broadly be categorized in eigenvector-, algorithm-, or model-based methods. Many classical ordination techniques, including principal components analysis, correspondence analysis (CA) and its derivatives (detrended correspondence analysis, canonical correspondence analysis, and redundancy analysis, belong to the first group). The second group includes some distance-based methods such as non-metric multidimensional scaling, and machine learning methods such as T-distributed stochastic neighbor embedding and nonlinear dimensionality reduction. The third group includes model-based ordination methods, which can be considered as multivariate extensions of Generalized Linear Models. Model-based ordination methods are more flexible in their application than classical ordination methods, so that it is for example possible to include random-effects. Unlike in the aforementioned two groups, there is no (implicit or explicit) distance measure in the ordination. Instead, a distribution needs to be specified for the responses as is typical for statistical models. These and other assumptions, such as the assumed mean-variance relationship, can be validated with the use of residual diagnostics, unlike in other ordination methods. == Applications == Ordination can be used on the analysis of any set of multivariate objects. It is frequently used in several environmental or ecological sciences, particularly plant community ecology. It is also used in genetics and systems biology for microarray data analysis and in psychometrics.

  Read more →
• 

  LogitBoost

  In machine learning and computational learning theory, LogitBoost is a boosting algorithm formulated by Jerome Friedman, Trevor Hastie, and Robert Tibshirani. The original paper casts the AdaBoost algorithm into a statistical framework. Specifically, if one considers AdaBoost as a generalized additive model and then applies the cost function of logistic regression, one can derive the LogitBoost algorithm. == Minimizing the LogitBoost cost function == LogitBoost can be seen as a convex optimization. Specifically, given that we seek an additive model of the form f = ∑ t α t h t {\displaystyle f=\sum _{t}\alpha _{t}h_{t}} the LogitBoost algorithm minimizes the logistic loss: ∑ i log ⁡ ( 1 + e − y i f ( x i ) ) {\displaystyle \sum _{i}\log \left(1+e^{-y_{i}f(x_{i})}\right)}

  Read more →
• 

  Optical neural network

  An optical neural network is a physical implementation of an artificial neural network with optical components. Early optical neural networks used a photorefractive Volume hologram to interconnect arrays of input neurons to arrays of output with synaptic weights in proportion to the multiplexed hologram's strength. Volume holograms were further multiplexed using spectral hole burning to add one dimension of wavelength to space to achieve four dimensional interconnects of two dimensional arrays of neural inputs and outputs. This research led to extensive research on alternative methods using the strength of the optical interconnect for implementing neuronal communications. Some artificial neural networks that have been implemented as optical neural networks include the Hopfield neural network and the Kohonen self-organizing map with liquid crystal spatial light modulators Optical neural networks can also be based on the principles of neuromorphic engineering, creating neuromorphic photonic systems. Typically, these systems encode information in the networks using spikes, mimicking the functionality of spiking neural networks in optical and photonic hardware. Photonic devices that have demonstrated neuromorphic functionalities include (among others) vertical-cavity surface-emitting lasers, integrated photonic modulators, optoelectronic systems based on superconducting Josephson junctions or systems based on resonant tunnelling diodes. == Electrochemical vs. optical neural networks == Biological neural networks function on an electrochemical basis, while optical neural networks use electromagnetic waves. Optical interfaces to biological neural networks can be created with optogenetics, but is not the same as an optical neural networks. In biological neural networks there exist a lot of different mechanisms for dynamically changing the state of the neurons, these include short-term and long-term synaptic plasticity. Synaptic plasticity is among the electrophysiological phenomena used to control the efficiency of synaptic transmission, long-term for learning and memory, and short-term for short transient changes in synaptic transmission efficiency. Implementing this with optical components is difficult, and ideally requires advanced photonic materials. Properties that might be desirable in photonic materials for optical neural networks include the ability to change their efficiency of transmitting light, based on the intensity of incoming light. == Rising Era of Optical Neural Networks == With the increasing significance of computer vision in various domains, the computational cost of these tasks has increased, making it more important to develop the new approaches of the processing acceleration. Optical computing has emerged as a potential alternative to GPU acceleration for modern neural networks, particularly considering the looming obsolescence of Moore's Law. Consequently, optical neural networks have garnered increased attention in the research community. Presently, two primary methods of optical neural computing are under research: silicon photonics-based and free-space optics. Each approach has its benefits and drawbacks; while silicon photonics may offer superior speed, it lacks the massive parallelism that free-space optics can deliver. Given the substantial parallelism capabilities of free-space optics, researchers have focused on taking advantage of it. One implementation, proposed by Lin et al., involves the training and fabrication of phase masks for a handwritten digit classifier. By stacking 3D-printed phase masks, light passing through the fabricated network can be read by a photodetector array of ten detectors, each representing a digit class ranging from 1 to 10. Although this network can achieve terahertz-range classification, it lacks flexibility, as the phase masks are fabricated for a specific task and cannot be retrained. An alternative method for classification in free-space optics, introduced by Cahng et al., employs a 4F system that is based on the convolution theorem to perform convolution operations. This system uses two lenses to execute the Fourier transforms of the convolution operation, enabling passive conversion into the Fourier domain without power consumption or latency. However, the convolution operation kernels in this implementation are also fabricated phase masks, limiting the device's functionality to specific convolutional layers of the network only. In contrast, Li et al. proposed a technique involving kernel tiling to use the parallelism of the 4F system while using a Digital Micromirror Device (DMD) instead of a phase mask. This approach allows users to upload various kernels into the 4F system and execute the entire network's inference on a single device. Unfortunately, modern neural networks are not designed for the 4F systems, as they were primarily developed during the CPU/GPU era. Mostly because they tend to use a lower resolution and a high number of channels in their feature maps. == Other Implementations == In 2007 there was one model of Optical Neural Network: the Programmable Optical Array/Analogic Computer (POAC). It had been implemented in the year 2000 and reported based on modified Joint Fourier Transform Correlator (JTC) and Bacteriorhodopsin (BR) as a holographic optical memory. Full parallelism, large array size and the speed of light are three promises offered by POAC to implement an optical CNN. They had been investigated during the last years with their practical limitations and considerations yielding the design of the first portable POAC version. The practical details – hardware (optical setups) and software (optical templates) – were published. However, POAC is a general purpose and programmable array computer that has a wide range of applications including: image processing pattern recognition target tracking real-time video processing document security optical switching == Progress in the 2020s == Taichi from Tsinghua University in Beijing is a hybrid ONN that combines the power efficiency and parallelism of optical diffraction and the configurability of optical interference. Taichi offers 13.96 million parameters. Taichi avoids the high error rates that afflict deep (multi-layer) networks by combining clusters of fewer-layer diffractive units with arrays of interferometers for reconfigurable computation. Its encoding protocol divides large network models into sub-models that can be distributed across multiple chiplets in parallel. Taichi achieved 91.89% accuracy in tests with the Omniglot database. It was also used to generate music Bach and generate images the styles of Van Gogh and Munch. The developers claimed energy efficiency of up to 160 trillion operations second−1 watt−1 and an area efficiency of 880 trillion multiply-accumulate operations mm−2 or 103 more energy efficient than the NVIDIA H100, and 102 times more energy efficient and 10 times more area efficient than previous ONNs. Time dimension has recently been introduced into diffractive neural network by fs laser lithography of perovskite hydration. The temporal behaviour of the neuron can be modulated by the fs laser at the nanoscale, enabling a programmable holographic neural network with temporal evolution functionality, i.e., the functionality can change with time under the hydration stimuli. An in-memory temporal inference functionality was demonstrated to mimic the function evolution of the human brain, i.e., the functionality can change from simple digit image classification to more complicated digit and clothing product image classification with time. This is the first time of introducing time dimension into the optical neural network, laying a foundation for future brain-like photonic chip development.

  Read more →
• 

  Apprenticeship learning

  In artificial intelligence, apprenticeship learning (or learning from demonstration or imitation learning) is the process of learning by observing an expert. It can be viewed as a form of supervised learning, where the training dataset consists of task executions by a demonstration teacher. == Mapping function approach == Mapping methods try to mimic the expert by forming a direct mapping either from states to actions, or from states to reward values. For example, in 2002 researchers used such an approach to teach an AIBO robot basic soccer skills. === Inverse reinforcement learning approach === Inverse reinforcement learning (IRL) is the process of deriving a reward function from observed behavior. While ordinary "reinforcement learning" involves using rewards and punishments to learn behavior, in IRL the direction is reversed, and a robot observes a person's behavior to figure out what goal that behavior seems to be trying to achieve. The IRL problem can be defined as: Given 1) measurements of an agent's behaviour over time, in a variety of circumstances; 2) measurements of the sensory inputs to that agent; 3) a model of the physical environment (including the agent's body): Determine the reward function that the agent is optimizing. IRL researcher Stuart J. Russell proposes that IRL might be used to observe humans and attempt to codify their complex "ethical values", in an effort to create "ethical robots" that might someday know "not to cook your cat" without needing to be explicitly told. The scenario can be modeled as a "cooperative inverse reinforcement learning game", where a "person" player and a "robot" player cooperate to secure the person's implicit goals, despite these goals not being explicitly known by either the person nor the robot. In 2017, OpenAI and DeepMind applied deep learning to the cooperative inverse reinforcement learning in simple domains such as Atari games and straightforward robot tasks such as backflips. The human role was limited to answering queries from the robot as to which of two different actions were preferred. The researchers found evidence that the techniques may be economically scalable to modern systems. Apprenticeship via inverse reinforcement learning (AIRP) was developed by in 2004 Pieter Abbeel, Professor in Berkeley's EECS department, and Andrew Ng, Associate Professor in Stanford University's Computer Science Department. AIRP deals with "Markov decision process where we are not explicitly given a reward function, but where instead we can observe an expert demonstrating the task that we want to learn to perform". AIRP has been used to model reward functions of highly dynamic scenarios where there is no obvious reward function intuitively. Take the task of driving for example, there are many different objectives working simultaneously - such as maintaining safe following distance, a good speed, not changing lanes too often, etc. This task, may seem easy at first glance, but a trivial reward function may not converge to the policy wanted. One domain where AIRP has been used extensively is helicopter control. While simple trajectories can be intuitively derived, complicated tasks like aerobatics for shows has been successful. These include aerobatic maneuvers like - in-place flips, in-place rolls, loops, hurricanes and even auto-rotation landings. This work was developed by Pieter Abbeel, Adam Coates, and Andrew Ng - "Autonomous Helicopter Aerobatics through Apprenticeship Learning" === System model approach === System models try to mimic the expert by modeling world dynamics. == Plan approach == The system learns rules to associate preconditions and postconditions with each action. In one 1994 demonstration, a humanoid learns a generalized plan from only two demonstrations of a repetitive ball collection task. == Example == Learning from demonstration is often explained from a perspective that the working Robot-control-system is available and the human-demonstrator is using it. And indeed, if the software works, the Human operator takes the robot-arm, makes a move with it, and the robot will reproduce the action later. For example, he teaches the robot-arm how to put a cup under a coffeemaker and press the start-button. In the replay phase, the robot is imitating this behavior 1:1. But that is not how the system works internally; it is only what the audience can observe. In reality, Learning from demonstration is much more complex. One of the first works on learning by robot apprentices (anthropomorphic robots learning by imitation) was Adrian Stoica's PhD thesis in 1995. In 1997, robotics expert Stefan Schaal was working on the Sarcos robot-arm. The goal was simple: solve the pendulum swingup task. The robot itself can execute a movement, and as a result, the pendulum is moving. The problem is, that it is unclear what actions will result into which movement. It is an Optimal control-problem which can be described with mathematical formulas but is hard to solve. The idea from Schaal was, not to use a Brute-force solver but record the movements of a human-demonstration. The angle of the pendulum is logged over three seconds at the y-axis. This results into a diagram which produces a pattern. In computer animation, the principle is called spline animation. That means, on the x-axis the time is given, for example 0.5 seconds, 1.0 seconds, 1.5 seconds, while on the y-axis is the variable given. In most cases it's the position of an object. In the inverted pendulum it is the angle. The overall task consists of two parts: recording the angle over time and reproducing the recorded motion. The reproducing step is surprisingly simple. As an input we know, in which time step which angle the pendulum must have. Bringing the system to a state is called “Tracking control” or PID control. That means, we have a trajectory over time, and must find control actions to map the system to this trajectory. Other authors call the principle “steering behavior”, because the aim is to bring a robot to a given line.

  Read more →
• 

  Spiking neural network

  Spiking neural networks (SNNs) are artificial neural networks (ANN) that mimic natural neural networks. These models leverage timing of discrete spikes as the main information carrier. In addition to neuronal and synaptic state, SNNs incorporate the concept of time into their operating model. The idea is that neurons in the SNN do not transmit information at each propagation cycle (as it happens with typical multi-layer perceptron networks), but rather transmit information only when a membrane potential—an intrinsic quality of the neuron related to its membrane electrical charge—reaches a specific value, called the threshold. When the membrane potential reaches the threshold, the neuron fires, and generates a signal that travels to other neurons which, in turn, increase or decrease their potentials in response to this signal. A neuron model that fires at the moment of threshold crossing is also called a spiking neuron model. While spike rates can be considered the analogue of the variable output of a traditional ANN, neurobiology research indicated that high speed processing cannot be performed solely through a rate-based scheme. For example humans can perform an image recognition task requiring no more than 10ms of processing time per neuron through the successive layers (going from the retina to the temporal lobe). This time window is too short for rate-based encoding. The precise spike timings in a small set of spiking neurons also has a higher information coding capacity compared with a rate-based approach. The most prominent spiking neuron model is the leaky integrate-and-fire model. In that model, the momentary activation level (modeled as a differential equation) is normally considered to be the neuron's state, with incoming spikes pushing this value higher or lower, until the state eventually either decays or—if the firing threshold is reached—the neuron fires. After firing, the state variable is reset to a lower value. Various decoding methods exist for interpreting the outgoing spike train as a real-value number, relying on either the frequency of spikes (rate-code), the time-to-first-spike after stimulation, or the interval between spikes. == History == Many multi-layer artificial neural networks are fully connected, receiving input from every neuron in the previous layer and signalling every neuron in the subsequent layer. Although these networks have achieved breakthroughs, they do not match biological networks and do not mimic neurons. The biology-inspired Hodgkin–Huxley model of a spiking neuron was proposed in 1952. This model described how action potentials are initiated and propagated. Communication between neurons, which requires the exchange of chemical neurotransmitters in the synaptic gap, is described in models such as the integrate-and-fire model, FitzHugh–Nagumo model (1961–1962), and Hindmarsh–Rose model (1984). The leaky integrate-and-fire model (or a derivative) is commonly used as it is easier to compute than Hodgkin–Huxley. While the notion of an artificial spiking neural network became popular only in the twenty-first century, studies between 1980 and 1995 supported the concept. The first models of this type of ANN appeared to simulate non-algorithmic intelligent information processing systems. However, the notion of the spiking neural network as a mathematical model was first worked on in the early 1970s. As of 2019 SNNs lagged behind ANNs in accuracy, but the gap is decreasing, and has vanished on some tasks. == Underpinnings == Information in the brain is represented as action potentials (neuron spikes), which may group into spike trains or coordinated waves. A fundamental question of neuroscience is to determine whether neurons communicate by a rate or temporal code. Temporal coding implies that a single spiking neuron can replace hundreds of hidden units on a conventional neural net. SNNs define a neuron's current state as its potential (possibly modeled as a differential equation). An input pulse causes the potential to rise and then gradually decline. Encoding schemes can interpret these pulse sequences as a number, considering pulse frequency and pulse interval. Using the precise time of pulse occurrence, a neural network can consider more information and offer better computing properties. SNNs compute in the continuous domain. Such neurons test for activation only when their potentials reach a certain value. When a neuron is activated, it produces a signal that is passed to connected neurons, accordingly raising or lowering their potentials. The SNN approach produces a continuous output instead of the binary output of traditional ANNs. Pulse trains are not easily interpretable, hence the need for encoding schemes. However, a pulse train representation may be more suited for processing spatiotemporal data (or real-world sensory data classification). SNNs connect neurons only to nearby neurons so that they process input blocks separately (similar to CNN using filters). They consider time by encoding information as pulse trains so as not to lose information. This avoids the complexity of a recurrent neural network (RNN). Impulse neurons are more powerful computational units than traditional artificial neurons. SNNs are theoretically more powerful than so called "second-generation networks" defined as ANNs "based on computational units that apply activation function with a continuous set of possible output values to a weighted sum (or polynomial) of the inputs"; however, SNN training issues and hardware requirements limit their use. Although unsupervised biologically inspired learning methods are available such as Hebbian learning and STDP, no effective supervised training method is suitable for SNNs that can provide better performance than second-generation networks. Spike-based activation of SNNs is not differentiable, thus gradient descent-based backpropagation (BP) is not available. SNNs have much larger computational costs for simulating realistic neural models than traditional ANNs. Pulse-coupled neural networks (PCNN) are often confused with SNNs. A PCNN can be seen as a kind of SNN. Researchers are actively working on various topics. The first concerns differentiability. The expressions for both the forward- and backward-learning methods contain the derivative of the neural activation function which is not differentiable because a neuron's output is either 1 when it spikes, and 0 otherwise. This all-or-nothing behavior disrupts gradients and makes these neurons unsuitable for gradient-based optimization. Approaches to resolving it include: resorting to entirely biologically inspired local learning rules for the hidden units translating conventionally trained "rate-based" NNs to SNNs smoothing the network model to be continuously differentiable defining an SG (Surrogate Gradient) as a continuous relaxation of the real gradients The second concerns the optimization algorithm. Standard BP can be expensive in terms of computation, memory, and communication and may be poorly suited to the hardware that implements it (e.g., a computer, brain, or neuromorphic device). Incorporating additional neuron dynamics such as Spike Frequency Adaptation (SFA) is a notable advance, enhancing efficiency and computational power. These neurons sit between biological complexity and computational complexity. Originating from biological insights, SFA offers significant computational benefits by reducing power usage, especially in cases of repetitive or intense stimuli. This adaptation improves signal/noise clarity and introduces an elementary short-term memory at the neuron level, which in turn, improves accuracy and efficiency. This was mostly achieved using compartmental neuron models. The simpler versions are of neuron models with adaptive thresholds, are an indirect way of achieving SFA. It equips SNNs with improved learning capabilities, even with constrained synaptic plasticity, and elevates computational efficiency. This feature lessens the demand on network layers by decreasing the need for spike processing, thus lowering computational load and memory access time—essential aspects of neural computation. Moreover, SNNs utilizing neurons capable of SFA achieve levels of accuracy that rival those of conventional ANNs, while also requiring fewer neurons for comparable tasks. This efficiency streamlines the computational workflow and conserves space and energy, while maintaining technical integrity. High-performance deep spiking neural networks can operate with 0.3 spikes per neuron. == Applications == SNNs can in principle be applied to the same applications as traditional ANNs. In addition, SNNs can model the central nervous system of biological organisms, such as an insect seeking food without prior knowledge of the environment. Due to their relative realism, they can be used to study biological neural circuits. Starting with a hypothesis about the topology of a biological neuronal circuit and its functi

  Read more →
• 

  Recursive neural network

  A recursive neural network is a kind of deep neural network created by applying the same set of weights recursively over a structured input, to produce a structured prediction over variable-size input structures, or a scalar prediction on it, by traversing a given structure in topological order. These networks were first introduced to learn distributed representations of structure (such as logical terms), but have been successful in multiple applications, for instance in learning sequence and tree structures in natural language processing (mainly continuous representations of phrases and sentences based on word embeddings). == Architectures == === Basic === In the simplest architecture, nodes are combined into parents using a weight matrix (which is shared across the whole network) and a non-linearity such as the tanh {\displaystyle \tanh } hyperbolic function. If c 1 {\displaystyle c_{1}} and c 2 {\displaystyle c_{2}} are n {\displaystyle n} -dimensional vector representations of nodes, their parent will also be an n {\displaystyle n} -dimensional vector, defined as: p 1 , 2 = tanh ⁡ ( W [ c 1 ; c 2 ] ) {\displaystyle p_{1,2}=\tanh(W[c_{1};c_{2}])} where W {\displaystyle W} is a learned n × 2 n {\displaystyle n\times 2n} weight matrix. This architecture, with a few improvements, has been used for successfully parsing natural scenes, syntactic parsing of natural language sentences, and recursive autoencoding and generative modeling of 3D shape structures in the form of cuboid abstractions. === Recursive cascade correlation (RecCC) === RecCC is a constructive neural network approach to deal with tree domains with pioneering applications to chemistry and extension to directed acyclic graphs. === Unsupervised RNN === A framework for unsupervised RNN has been introduced in 2004. === Tensor === Recursive neural tensor networks use a single tensor-based composition function for all nodes in the tree. == Training == === Stochastic gradient descent === Typically, stochastic gradient descent (SGD) is used to train the network. The gradient is computed using backpropagation through structure (BPTS), a variant of backpropagation through time used for recurrent neural networks. == Properties == The universal approximation capability of RNNs over trees has been proved in literature. == Related models == === Recurrent neural networks === Recurrent neural networks are recursive artificial neural networks with a certain structure: that of a linear chain. Whereas recursive neural networks operate on any hierarchical structure, combining child representations into parent representations, recurrent neural networks operate on the linear progression of time, combining the previous time step and a hidden representation into the representation for the current time step. === Tree Echo State Networks === An efficient approach to implement recursive neural networks is given by the Tree Echo State Network within the reservoir computing paradigm. === Extension to graphs === Extensions to graphs include graph neural network (GNN), Neural Network for Graphs (NN4G), and more recently convolutional neural networks for graphs.

  Read more →
• 

  Word2vec

  Word2vec is a technique in natural language processing for obtaining vector representations of words. These vectors capture information about the meaning of the word based on the surrounding words. The word2vec algorithm estimates these representations by modeling text in a large corpus. Once trained, such a model can detect synonymous words or suggest additional words for a partial sentence. Word2vec was developed by Tomáš Mikolov, Kai Chen, Greg Corrado, Ilya Sutskever and Jeff Dean at Google, and published in 2013. Word2vec represents a word as a high-dimension vector of numbers which capture relationships between words. In particular, words which appear in similar contexts are mapped to vectors which are nearby as measured by cosine similarity. This indicates the level of semantic similarity between the words, so for example the vectors for walk and ran are nearby, as are those for "but" and "however", and "Berlin" and "Germany". == Approach == Word2vec is a group of related models that are used to produce word embeddings. These models are shallow, two-layer neural networks that are trained to reconstruct linguistic contexts of words. Word2vec takes as its input a large corpus of text and produces a mapping of the set of words to a vector space, typically of several hundred dimensions, with each unique word in the corpus being assigned a vector in the space. Word2vec can use either of two model architectures to produce these distributed representations of words: continuous bag of words (CBOW) or continuously sliding skip-gram. In both architectures, word2vec considers both individual words and a sliding context window as it iterates over the corpus. The CBOW can be viewed as a 'fill in the blank' task, where the word embedding represents the way the word influences the relative probabilities of other words in the context window. Words which are semantically similar should influence these probabilities in similar ways, because semantically similar words should be used in similar contexts. The order of context words does not influence prediction (bag of words assumption). In the continuous skip-gram architecture, the model uses the current word to predict the surrounding window of context words. The skip-gram architecture weighs nearby context words more heavily than more distant context words. According to the authors' note, CBOW is faster while skip-gram does a better job for infrequent words. After the model is trained, the learned word embeddings are positioned in the vector space such that words that share common contexts in the corpus — that is, words that are semantically and syntactically similar — are located close to one another in the space. More dissimilar words are located farther from one another in the space. == Mathematical details == This section is based on expositions. A corpus is a sequence of words. Both CBOW and skip-gram are methods to learn one vector per word appearing in the corpus. Let V {\displaystyle V} ("vocabulary") be the set of all words appearing in the corpus C {\displaystyle C} . Our goal is to learn one vector v w ∈ R d {\displaystyle v_{w}\in \mathbb {R} ^{d}} for each word w ∈ V {\displaystyle w\in V} . The idea of skip-gram is that the vector of a word should be close to the vector of each of its neighbors. The idea of CBOW is that the vector-sum of a word's neighbors should be close to the vector of the word. === Continuous bag-of-words (CBOW) === The idea of CBOW is to represent each word with a vector, such that it is possible to predict a word using the sum of the vectors of its neighbors. Specifically, for each word w i {\displaystyle w_{i}} in the corpus, the one-hot encoding of the word is used as the input to the neural network. The output of the neural network is a probability distribution over the dictionary, representing a prediction of individual words in the neighborhood of w i {\displaystyle w_{i}} . The objective of training is to maximize ∑ i ln ⁡ Pr ( w i ∣ w i + j : j ∈ N ) {\displaystyle \sum _{i}\ln \Pr(w_{i}\mid w_{i+j}\colon j\in N)} where N {\displaystyle N} is a set of (non-zero) indices representing the relative locations of nearby words considered to be in w i {\displaystyle w_{i}} 's neighborhood. For example, if we want each word in the corpus to be predicted by every other word in a small span of 4 words. The set of relative indexes of neighbor words will be: N = { − 2 , − 1 , + 1 , + 2 } {\displaystyle N=\{-2,-1,+1,+2\}} , and the objective is to maximize ∑ i ln ⁡ Pr ( w i ∣ w i − 2 , w i − 1 , w i + 1 , w i + 2 ) {\displaystyle \sum _{i}\ln \Pr(w_{i}\mid w_{i-2},w_{i-1},w_{i+1},w_{i+2})} . In standard bag-of-words, a word's context is represented by a word-count (aka a word histogram) of its neighboring words. For example, the "sat" in "the cat sat on the mat" is represented as {"the": 2, "cat": 1, "on": 1}. Note that the last word "mat" is not used to represent "sat", because it is outside the neighborhood N = { − 2 , − 1 , + 1 , + 2 } {\displaystyle N=\{-2,-1,+1,+2\}} . In continuous bag-of-words, the histogram is multiplied by a matrix V {\displaystyle V} to obtain a continuous representation of the word's context. The matrix V {\displaystyle V} is also called a dictionary. Its columns are the word vectors. It has D {\displaystyle D} columns, where D {\displaystyle D} is the size of the dictionary. Let d {\displaystyle d} be the length of each word vector. We have V ∈ R d × D {\displaystyle V\in \mathbb {R} ^{d\times D}} . For example, multiplying the word histogram {"the": 2, "cat": 1, "on": 1} with V {\displaystyle V} , we obtain 2 v the + v cat + v on {\displaystyle 2v_{\text{the}}+v_{\text{cat}}+v_{\text{on}}} . This is then multiplied with another matrix V ′ {\displaystyle V'} of shape R D × d {\displaystyle \mathbb {R} ^{D\times d}} . Each row of it is a word vector v ′ {\displaystyle v'} . This results in a vector of length D {\displaystyle D} , one entry per dictionary entry. Then, apply the softmax to obtain a probability distribution over the dictionary. This system can be visualized as a neural network, similar in spirit to an autoencoder, of architecture linear-linear-softmax, as depicted in the diagram. The system is trained by gradient descent to minimize the cross-entropy loss. In full formula, the cross-entropy loss is: − ∑ i ln ⁡ e v w i ′ ⋅ ( ∑ j ∈ N v w j + i ) ∑ w ′ e v w ′ ′ ⋅ ( ∑ j ∈ N v w j + i ) {\displaystyle -\sum _{i}\ln {\frac {e^{v_{w_{i}}'\cdot (\sum _{j\in N}v_{w_{j+i}})}}{\sum _{w'}e^{v_{w'}'\cdot (\sum _{j\in N}v_{w_{j+i}})}}}} where the outer summation ∑ i {\displaystyle \sum _{i}} is over the words in a corpus, the quantity ∑ j ∈ N v w j + i {\displaystyle \sum _{j\in N}v_{w_{j+i}}} is the sum of a word's neighbors' vectors, etc. Once such a system is trained, we have two trained matrices V , V ′ {\displaystyle V,V'} . Either the column vectors of V {\displaystyle V} or the row vectors of V ′ {\displaystyle V'} can serve as the dictionary. For example, the word "sat" can be represented as either the "sat"-th column of V {\displaystyle V} or the "sat"-th row of V ′ {\displaystyle V'} . It is also possible to simply define V ′ = V ⊤ {\displaystyle V'=V^{\top }} , in which case there would no longer be a choice. === Skip-gram === The idea of skip-gram is to represent each word with a vector, such that it is possible to predict the vectors of its neighbors using the vector of a word. The architecture is still linear-linear-softmax, the same as CBOW, but the input and the output are switched. Specifically, for each word w i {\displaystyle w_{i}} in the corpus, the one-hot encoding of the word is used as the input to the neural network. The output of the neural network is a probability distribution over the dictionary, representing a prediction of individual words in the neighborhood of w i {\displaystyle w_{i}} . The objective of training is to maximize ∑ i ∑ j ∈ N ln ⁡ Pr ( w j + i ∣ w i ) {\displaystyle \sum _{i}\sum _{j\in N}\ln \Pr(w_{j+i}\mid w_{i})} . In full formula, the loss function is − ∑ i ∑ j ∈ N ln ⁡ e v w j + i ′ ⋅ v w i ∑ w ′ e v w ′ ′ ⋅ v w i {\displaystyle -\sum _{i}\sum _{j\in N}\ln {\frac {e^{v_{w_{j+i}}'\cdot v_{w_{i}}}}{\sum _{w'}e^{v_{w'}'\cdot v_{w_{i}}}}}} Same as CBOW, once such a system is trained, we have two trained matrices V , V ′ {\displaystyle V,V'} . Either the column vectors of V {\displaystyle V} or the row vectors of V ′ {\displaystyle V'} can serve as the dictionary. It is also possible to simply define V ′ = V ⊤ {\displaystyle V'=V^{\top }} , in which case there would no longer be a choice. Essentially, skip-gram and CBOW are exactly the same in architecture. They only differ in the objective function during training. == History == During the 1980s, there were some early attempts at using neural networks to represent words and concepts as vectors. In 2010, Tomáš Mikolov (then at Brno University of Technology) with co-authors applied a simple recurrent neural network with a single hidden

  Read more →
• 

  SQLBuddy

  SQL Buddy is an open-source web-based application primarily coded in PHP, that allows users to control both MySQL and SQLite database through a web browser. The project was well regarded for its easy installation process and the friendly user interface it offered. The application was further praised for its cross-platform compatibility, meaning users could manage their databases on various operating systems, including Linux, Windows, and macOS. The development of SQL Buddy has stopped, with version 1.3.3 being the final release on January 18, 2011. No further releases are expected.

  Read more →
• 

  KXEN Inc.

  KXEN was an American software company which existed from 1998 to 2013 when it was acquired by SAP AG. == History == KXEN was founded in June 1998 by Roger Haddad and Michel Bera. It was based in San Francisco, California with offices in Paris and London. On September 10, 2013, SAP AG announced plans to acquire KXEN. On October 1, 2013, a letter to KXEN customers announced the acquisition closed. KXEN primarily marketed predictive analytics software. == Predictive analytics == InfiniteInsight is a predictive modeling suite developed by KXEN that assists analytic professionals, and business executives to extract information from data. Among other functions, InfiniteInsight is used for variable importance, classification, regression, segmentation, time series, product recommendation, as described and expressed by the Java Data Mining interface, and for social network analysis. InfiniteInsight allows prediction of a behavior or a value, the forecast of a time series or the understanding of a group of individuals with similar behavior. Advanced functions include behavioral modeling, exporting the model code into different target environments or building predictive models on top of SAS or SPSS data files. Competitors are SAS Enterprise Miner, IBM SPSS Modeler, and Statistica. Open source predictive tools like the R package or Weka are also competitors, since they provide similar features free of charge.

  Read more →
• 

  World Programming System

  The World Programming System, also known as WPS Analytics or WPS, is a software product developed by a company called World Programming (acquired by Altair Engineering). WPS Analytics supports users of mixed ability to access and process data and to perform data science tasks. It has interactive visual programming tools using data workflows, and it has coding tools supporting the use of the SAS language mixed with Python, R and SQL. == About == WPS can use programs written in the language of SAS without the need for translating them into any other language. In this regard WPS is compatible with the SAS system. WPS has a built-in language interpreter able to process the language of SAS and produce similar results. WPS is available to run on z/OS, Windows, macOS, Linux (x86, Armv8 64-bit, IBM Power LE, IBM Z), and AIX. On all supported platforms, programs written in the language of SAS can be executed from a WPS command line interface, often referred to as running in batch mode. WPS can also be used from a graphical user interface known as the WPS Workbench for managing, editing and running programs written in the language of SAS. The WPS Workbench user interface is based on Eclipse. WPS version 4 (released in March 2018) introduced a drag-and-drop workflow canvas providing interactive blocks for data retrieval, blending and preparation, data discovery and profiling, predictive modelling powered by machine learning algorithms, model performance validation and scorecards. WPS version 3 (released in February 2012) provided a new client/server architecture that allows the WPS Workbench GUI to execute SAS programs on remote server installations of WPS in a network or cloud. The resulting output, data sets, logs, etc., can then all be viewed and manipulated from inside the Workbench as if the workloads had been executed locally. SAS programs do not require any special language statements to use this feature. == Summary of main features == Runs on Windows, macOS, z/OS, Linux (x86, Armv8 64-bit, IBM Power LE, IBM Z), and AIX An integrated development environment based on Eclipse for Linux, macOS and Windows. Support for language of SAS elements. Support for the language of SAS Macros. Matrix Programming support using PROC IML. Support for generating band plots, bar charts, box plots, bubble plots, contour plots, dendrogram plots, ellipse plots, fringe plots, heat maps, high-low plots, histograms, loess plots, needle plots, pie charts, penalised b-spline, radar charts, reference lines, scatter plots, series plots, step plots, regression plots and vector plots. Support for statistical procedures ACECLUS, ASSOCRULES, ANOVA, BIN, BOXPLOT, CANCORR, CANDISC, CLUSTER, CORRESP, DISCRIM, DISTANCE, FACTOR, FASTCLUS, FREQ, GAM, GANNO, GENMOD, GLIMMIX, GLM, GLMMOD, GLMSELECT, ICLIFETEST, KDE, LIFEREG, LIFETEST, LOESS, LOGISTIC, MDS, MEANS, MI, MIANALYSE, MIXED, MODECLUS, NESTED, NLIN, NPAR1WAY, PHREG, PLAN, PLS, POWER, PRINCOMP, PROBIT, QUANTREG, RBF, REG, ROBUSTREG, RSREG, SCORE, SEGMENT, SIMNORMAL, STANDARD, STDSIZE, STDRATE, STEPDISC, SUMMARY, SURVEYMEANS, SURVEYSELECT, TPSPLINE, TRANSREG, TREE, TTEST, UNIVARIATE, VARCLUS, VARCOMP Support for time series procedures ARIMA, AUTOREG, ESM, EXPAND, FORECAST, LOAN, SEVERITY, SPECTRA, TIMESERIES, X12 Support for machine learning procedures DECISIONFOREST, DECISIONTREE, GMM, MLP, OPTIMALBIN, SEGMENT, SVM Support for ODS. Reads and writes SAS datasets (compressed or uncompressed). Access: Actian Matrix (previously known as ParAccel), DASD, DB2, Excel, Greenplum, Hadoop, Informix, Kognitio Archived 2012-08-24 at the Wayback Machine, MariaDB, MySQL, Netezza, ODBC, OLEDB, Oracle, PostgreSQL, SAND, Snowflake, SPSS/PSPP, SQL Server, Sybase, Sybase IQ, Teradata, VSAM, Vertica and XML. Support for SAS Tape Format. Direct output of reports to CSV, PDF and HTML. Support to connect WPS systems programmatically, remote submit parts of a program to execute on connected remote servers, upload and download data between the connected systems. Support for Hadoop Support for R Support for Python == Industry recognition == Gartner recognized World Programming in their Cool Vendors in Data Science, 2014 Report. == Lawsuit == In 2010 World Programming defended its use of the language of SAS in the High Court of England and Wales in SAS Institute Inc. v World Programming Ltd. The software was the subject of a lawsuit by SAS Institute. The EU Court of Justice ruled in favor of World Programming, stating that the copyright protection does not extend to the software functionality, the programming language used and the format of the data files used by the program. It stated that there is no copyright infringement when a company which does not have access to the source code of a program studies, observes and tests that program to create another program with the same functionality.

  Read more →