AI Analytics Trends

AI Analytics Trends — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Software requirements

  Software requirements for a system are the description of what the system should do, the service or services that it provides and the constraints on its operation. The IEEE Standard Glossary of Software Engineering Terminology defines a requirement as: A condition or capability needed by a user to solve a problem or achieve an objective A condition or capability that must be met or possessed by a system or system component to satisfy a contract, standard, specification, or other formally imposed document A documented representation of a condition or capability as in 1 or 2 The activities related to working with software requirements can broadly be broken down into elicitation, analysis, specification, and management. Note that the wording Software requirements is additionally used in software release notes to explain, which depending on software packages are required for a certain software to be built/installed/used. == Elicitation == Elicitation is the gathering and discovery of requirements from stakeholders and other sources. A variety of techniques can be used such as joint application design (JAD) sessions, interviews, document analysis, focus groups, etc. Elicitation is the first step of requirements development. == Analysis == Analysis is the logical breakdown that proceeds from elicitation. Analysis involves reaching a richer and more precise understanding of each requirement and representing sets of requirements in multiple, complementary ways. Requirements Triage or prioritization of requirements is another activity which often follows analysis. This relates to Agile software development in the planning phase, e.g. by Planning poker, however it might not be the same depending on the context and nature of the project and requirements or product/service that is being built. == Specification == Specification involves representing and storing the collected requirements knowledge in a persistent and well-organized fashion that facilitates effective communication and change management. Use cases, user stories, functional requirements, and visual analysis models are popular choices for requirements specification. == Validation == Validation involves techniques to confirm that the correct set of requirements has been specified to build a solution that satisfies the project's business objectives, and to detect and correct errors in the requirements before implementation. == Management == Requirements change during projects and there are often many of them. Management of this change becomes paramount to ensuring that the correct software is built for the stakeholders. == Tool support for Requirements Engineering == === Tools for Requirements Elicitation, Analysis and Validation === Taking into account that these activities may involve some artifacts such as observation reports (user observation), questionnaires (interviews, surveys and polls), use cases, user stories; activities such as requirement workshops (charrettes), brainstorming, mind mapping, role-playing; and even, prototyping; software products providing some or all of these capabilities can be used to help achieve these tasks. There is at least one author who advocates, explicitly, for mind mapping tools such as FreeMind; and, alternatively, for the use of specification by example tools such as Concordion. Additionally, the ideas and statements resulting from these activities may be gathered and organized with wikis and other collaboration tools such as Trello. The features actually implemented and standards compliance vary from product to product. === Tools for Requirements Specification === A Software requirements specification (SRS) document might be created using general-purpose software like a word processor or one of several specialized tools. Some of these tools can import, edit, export and publish SRS documents. It may help to make SRS documents while following a standardised structure and methodology, such as ISO/IEC/IEEE 29148:2018. Likewise, software may or not use some standard to import or export requirements (such as ReqIF) or not allow these exchanges at all. === Tools for Requirements Document Verification === Tools of this kind verify if there are any errors in a requirements document according to some expected structure or standard. === Tools for Requirements Comparison === Tools of this kind compare two requirement sets according to some expected document structure and standard. === Tools for Requirements Merge and Update === Tools of this kind allow the merging and update of requirement documents. === Tools for Requirements Traceability === Tools of this kind allow tracing requirements to other artifacts such as models and source code (forward traceability) or, to previous ones such as business rules and constraints (backwards traceability). === Tools for Model-Based Software or Systems Requirement Engineering === Model-based systems engineering (MBSE) is the formalised application of modelling to support system requirements, design, analysis, verification and validation activities beginning in the conceptual design phase and continuing throughout development and later lifecycle phases. It is also possible to take a model-based approach for some stages of the requirements engineering and, a more traditional one, for others. Very many combinations might be possible. The level of formality and complexity depends on the underlying methodology involved (for instance, i is much more formal than SysML and, even more formal than UML) === Tools for general Requirements Engineering === Tools in this category may provide some mix of the capabilities mentioned previously and others such as requirement configuration management and collaboration. The features actually implemented and standards compliance vary from product to product. There are even more capable or general tools that support other stages and activities. They are classified as ALM tools.

  Read more →
• 

  Sardinas–Patterson algorithm

  In coding theory, the Sardinas–Patterson algorithm is a classical algorithm for determining in polynomial time whether a given variable-length code is uniquely decodable, named after August Albert Sardinas and George W. Patterson, who published it in 1953. The algorithm carries out a systematic search for a string which admits two different decompositions into codewords. As Knuth reports, the algorithm was rediscovered about ten years later in 1963 by Floyd, despite the fact that it was at the time already well known in coding theory. == Idea of the algorithm == Consider the code { a ↦ 1 , b ↦ 011 , c ↦ 01110 , d ↦ 1110 , e ↦ 10011 } {\displaystyle \{\,{\texttt {a}}\mapsto {\texttt {1}},{\texttt {b}}\mapsto {\texttt {011}},{\texttt {c}}\mapsto {\texttt {01110}},{\texttt {d}}\mapsto {\texttt {1110}},{\texttt {e}}\mapsto {\texttt {10011}}\,\}} . This code, which is based on an example by Berstel, is an example of a code which is not uniquely decodable, since the string 011101110011 can be interpreted as the sequence of codewords 01110 – 1110 – 011, but also as the sequence of codewords 011 – 1 – 011 – 10011. Two possible decodings of this encoded string are thus given by cdb and babe. In general, a codeword can be found by the following idea: In the first round, we choose two codewords x 1 {\displaystyle x_{1}} and y 1 {\displaystyle y_{1}} such that x 1 {\displaystyle x_{1}} is a prefix of y 1 {\displaystyle y_{1}} , that is, x 1 w = y 1 {\displaystyle x_{1}w=y_{1}} for some "dangling suffix" w {\displaystyle w} . If one tries first x 1 = 011 {\displaystyle x_{1}={\texttt {011}}} and y 1 = 01110 {\displaystyle y_{1}={\texttt {01110}}} , the dangling suffix is w = 10 {\displaystyle {\texttt {w}}={\texttt {10}}} . If we manage to find two sequences x 2 , … , x p {\displaystyle x_{2},\ldots ,x_{p}} and y 2 , … , y q {\displaystyle y_{2},\ldots ,y_{q}} of codewords such that x 2 ⋯ x p = w y 2 ⋯ y q {\displaystyle x_{2}\cdots x_{p}=wy_{2}\cdots y_{q}} , then we are finished: For then the string x = x 1 x 2 ⋯ x p {\displaystyle x=x_{1}x_{2}\cdots x_{p}} can alternatively be decomposed as y 1 y 2 ⋯ y q {\displaystyle y_{1}y_{2}\cdots y_{q}} , and we have found the desired string having at least two different decompositions into codewords. In the second round, we try out two different approaches: the first trial is to look for a codeword that has w as prefix. Then we obtain a new dangling suffix w, with which we can continue our search. If we eventually encounter a dangling suffix that is itself a codeword (or the empty word), then the search will terminate, as we know there exists a string with two decompositions. The second trial is to seek for a codeword that is itself a prefix of w. In our example, we have w = 10 {\displaystyle w={\texttt {10}}} , and the sequence 1 is a codeword. We can thus also continue with w = 0 {\displaystyle w={\texttt {0}}} as the new dangling suffix. == Precise description of the algorithm == The algorithm is described most conveniently using quotients of formal languages. In general, for two sets of strings D and N, the (left) quotient N − 1 D {\displaystyle N^{-1}D} is defined as the residual words obtained from D by removing some prefix in N. Formally, N − 1 D = { y ∣ x y ∈ D and x ∈ N } {\displaystyle N^{-1}D=\{\,y\mid xy\in D~{\textrm {and}}~x\in N\,\}} . Now let C {\displaystyle C} denote the (finite) set of codewords in the given code. The algorithm proceeds in rounds, where we maintain in each round not only one dangling suffix as described above, but the (finite) set of all potential dangling suffixes. Starting with round i = 1 {\displaystyle i=1} , the set of potential dangling suffixes will be denoted by S i {\displaystyle S_{i}} . The sets S i {\displaystyle S_{i}} are defined inductively as follows: S 1 = C − 1 C ∖ { ε } {\displaystyle S_{1}=C^{-1}C\setminus \{\varepsilon \}} . Here, the symbol ε {\displaystyle \varepsilon } denotes the empty word. S i + 1 = C − 1 S i ∪ S i − 1 C {\displaystyle S_{i+1}=C^{-1}S_{i}\cup S_{i}^{-1}C} , for all i ≥ 1 {\displaystyle i\geq 1} . The algorithm computes the sets S i {\displaystyle S_{i}} in increasing order of i {\displaystyle i} . As soon as one of the S i {\displaystyle S_{i}} contains a word from C or the empty word, then the algorithm terminates and answers that the given code is not uniquely decodable. Otherwise, once a set S i {\displaystyle S_{i}} equals a previously encountered set S j {\displaystyle S_{j}} with j < i {\displaystyle j Read more →

• 

  Agentic commerce

  Agentic commerce (also referred to as agent-based commerce) describes an emerging form of e-commerce in which autonomous artificial intelligence (AI) agents independently execute purchasing and payment processes on behalf of users or organizations. Unlike conventional digital commerce systems, which require direct human interaction at key decision points, agentic commerce systems are designed to search for products or services, evaluate options, make purchasing decisions, and complete payments without real-time human involvement. An emerging development within the broader fields of e-commerce, fintech, and artificial intelligence; agentic commerce combines advances in generative AI, autonomous agents, application programming interfaces (APIs), and digital payment infrastructures to direct transactions with no direct human interaction. == Characteristics == A defining feature of agentic commerce is the delegation of end-to-end commercial activities to software agents. These agents typically operate according to predefined user preferences, rules, or constraints, such as price limits, quality criteria, delivery times, or preferred payment methods. Based on these parameters, an agent can autonomously perform tasks including product discovery, price comparison, contract selection, order placement, and payment execution. In contrast to decision-support systems, which provide recommendations to human users, agentic commerce systems are designed to act independently. Human involvement may be limited to initial configuration, periodic supervision, or exception handling. == Comparison with traditional and AI-assisted commerce == Traditional e-commerce requires users to manually browse products, select offers, and authorize payments. Generative AI systems used in commerce commonly assist users by answering questions or suggesting options, and do not complete transactions autonomously. Agentic commerce differs in that decision-making authority is partially or fully transferred to AI agents. As a result, the conventional customer journey, characterized by conscious decision points, may be replaced by continuous, automated micro-decisions performed by software. == Applications and business use cases == Potential applications of agentic commerce include recurring purchases, subscription management, business-to-business procurement, inventory replenishment, and price monitoring. In such contexts, transactions are often predictable and standardized, making them suitable for automation. From a business perspective, agentic commerce systems may be used to optimize supply chains, manage inventory levels, negotiate prices algorithmically, or execute transactions across multiple platforms. Enterprises adopting the new technology include retailers Walmart, Home Depot, Wayfair and Urban Outfitters, and ad tech DSPs, including Google Ads, Amazon, and Yahoo. Chinese tech firms are using apps to provide full-service shopping and payment tools. These includes Alibaba, Tencent, and ByteDance who are currently developing AI powered shopping apps. The Qwen AI chatbot allows users to complete transactions directly within its interface. US firms are still leading in developing AI models but integration is slower due to privacy restrictions. == Payments and technical infrastructure == Agentic commerce relies on digital payment systems capable of supporting automated, machine-initiated transactions, including API-based payment processing, tokenization, real-time authorization, and continuous risk monitoring. Typical user interfaces, such as shopping carts, may be replaced by backend integrations between AI agents, merchants, and payment service providers. For example, Iike 2025, Alibaba launched Alipay AI Pay, which grew and began operating as an application for different retailers. In December 2025, Alipay teamed up with Rokid to enable developers to integrate AI payments into AI agents on Rokid's Lingzhu platform. In January 2025, Alipay unveiled the Agentic Commerce Trust Protocol in partnership with Alibaba's consumer AI applications, such as the Qwen App and Taobao Instant Commerce. Qwen adopted the platform first, connecting it to Taobao Instant Commerce and Alipay AI Pay. Users could use Qwen's agentic feature to place food and drink orders within the application instead of having to click outside to an external browser. For merchants, participation in agentic commerce may require products and services to be presented in structured, machine-readable formats to ensure discoverability and interoperability with autonomous agents. == Universal Commerce Protocol (UCP) == In January 2026, Google announced the Universal Commerce Protocol (UCP), an open-source web standard intended to enable interoperability between AI agents and retail systems across the shopping journey, from discovery and checkout to post-purchase support. UCP makes use of REST, JSON-RPC transports, and support for Agent Payments Protocol (AP2), Agent2Agent (A2A), and Model Context Protocol (MCP). == Legal, regulatory, and security considerations == The use of autonomous agents in commerce raises legal and regulatory questions, particularly regarding authorization, liability, consumer protection, and fraud prevention. Existing payment and contract frameworks are generally based on human decision-makers, and their applicability to autonomous agents remains an area of active discussion. Open issues include responsibility for unauthorized or erroneous transactions, mechanisms for dispute resolution, standards for agent authentication, and compliance with data protection and financial regulations. Continuous, automated transaction patterns may also require new approaches to security and risk assessment. Traditional fraud models centered on identity verification may be insufficient for agentic commerce, and that merchants may need intent-based detection methods using machine learning and behavioral analysis to distinguish legitimate AI agents from malicious automation. === Governance frameworks === The deployment of autonomous AI agents in commercial environments has prompted the development of dedicated governance frameworks. These aim to define operational boundaries, decision authority, oversight mechanisms, and accountability structures for agentic systems. The Agentic Commerce Framework (ACF), created in 2025 by Vincent Dorange, is a governance standard that structures the deployment of autonomous AI agents around four founding principles (Decision Sovereignty, Governance by Design, Ultimate Human Control, Traceable Accountability), four operational layers, and 18 governance KPIs. In January 2026, Singapore's Infocomm Media Development Authority (IMDA) published the Model AI Governance Framework for Agentic AI, extending its existing AI governance guidelines to address agent-specific risks including delegation chains and multi-agent coordination. The Cloud Security Alliance (CSA) has also proposed an Agentic Trust Framework applying zero-trust principles to AI agent governance. == Ecosystem and implementation == The adoption of agentic commerce typically requires changes in commerce architecture, data modeling, identity and permissions, and API-based orchestration of checkout and post-purchase workflows. Management consultancies have identified agentic commerce as a structural evolution of digital commerce, emphasizing the role of AI-driven agents in automating discovery, decision-making, and transaction processes across commerce systems. McKinsey & Company has described agentic commerce as a significant shift in how consumers interact with brands and how enterprises design their commerce operating models. In Europe, this ecosystem also includes digital commerce consultancies specializing in the adoption of agentic commerce. Consulting firms such as Horrea support brands in understanding and implementing the technological and organizational shifts associated with agentic commerce. == Market development and outlook == Agentic commerce is generally regarded as an early-stage development. Industry analysts have projected that AI-driven agents could account for a small but growing share of digital payment transactions within the coming years. Due to the scale of global digital commerce, even limited adoption could represent substantial transaction volumes. Analysts expect that by 2029, AI agents could handle between 1% and 4% of all digital payment transactions. With a projected total transaction volume of over $36 trillion a year, even a small share translates into a market worth up to $1.47 trillion. According to a McKinsey study from October 2025, agentic commerce projects that by 2030, the U.S. business-to-consumer retail market alone could see up to $1 trillion in revenue orchestrated through agentic commerce. On a global scale, the opportunity could range from $3 trillion to $5 trillion. Early experiments and pilot projects have demonstrated both the potential and current limitations of the

  Read more →
• 

  Encyclopaedistics

  Encyclopaedistics or encyclopaedics as a discipline, is the academic scholarship of encyclopedias as sources of encyclopedic knowledge and cultural objects as well; in this sense, this discipline is also known as "encyclopaedia studies" and can be termed as "theoretical encyclopaediography" by analogy with theoretical lexicography. Encyclopaedistics as a practical activity (profession or business) also called "encyclopaedic practice" or "encyclopedism" is the process of assembling encyclopaedias available to the public for sale or for free (encyclopaedia publishing or practical encyclopediography). In this sense, it is the art or craft of writing, compiling, and editing the paper or online encyclopedias. As a practical activity, encyclopaedistics originated in the Middle Ages in connection with the development of compendiums based on alphabetical structuring (e.g. first edition of Polyanthea by Dominicus Nanus Mirabellius). Encyclopaedistics is often defined as "the art and science of selecting and disseminating the information most significant to mankind". == Field of study == Encyclopaedistics is a specialized aspect of information science and communication science. At the same time, encyclopaedistics is also considered as one of scholarly disciplines which are seen as auxiliary for historical research (auxiliary sciences of history) . Third, encyclopaedics is a domain of philosophy (Romanticism). This term associated with German philosophers of the 18th century, such as Novalis, Friedrich Schlegel, who sought to create a "Scientific Bible" - both real and ideal book as the quintessence of human education (enlightenment). In any case, the most popular topics in encyclopaedia studies refferd the history of organization of encyclopaedic knowledge, encyclopaedic knowledge determination and selection, glossary composition, current state of development of encyclopaedic activity, features of making encyclopaedias and encyclopaedic articles, usage, role and significance of encyclopaedias, typology of encyclopaedic literature, encyclopaedists and encyclopaedic schools, opposition of classical encyclopaedias and Wikipedia as well as paper encyclopaedias and online encyclopaedias, case experience in building encyclopedias etc. In general, scholarly studies contribute to appearance of successful well-crafted encyclopaedias with high-quality articles. == Contemporary encyclopaedic practice == Today, academic institutions, universities, and publishing companies worldwide are engaged in encyclopaedic activity building national, multinational (universal), regional and subject-specific encyclopaedias, or doing studies related encyclopaedias. The development of national encyclopaedias is one of the prerogatives of the European Parliament in the policy of protection of accurate and verified information and in the fight against mis- and disinformation as well as in the policy of protecting, promoting and projecting Europe's values and interests in the world.

  Read more →
• 

  Cost-sensitive machine learning

  Cost-sensitive machine learning is an approach within machine learning that considers varying costs associated with different types of errors. This method diverges from traditional approaches by introducing a cost matrix, explicitly specifying the penalties or benefits for each type of prediction error. The inherent difficulty which cost-sensitive machine learning tackles is that minimizing different kinds of classification errors is a multi-objective optimization problem. == Overview == Cost-sensitive machine learning optimizes models based on the specific consequences of misclassifications, making it a valuable tool in various applications. It is especially useful in problems with a high imbalance in class distribution and a high imbalance in associated costs Cost-sensitive machine learning introduces a scalar cost function in order to find one (of multiple) Pareto optimal points in this multi-objective optimization problem (similar to the Weighted sum model) == Cost Matrix == The cost matrix is a crucial element within cost-sensitive modeling, explicitly defining the costs or benefits associated with different prediction errors in classification tasks. Represented as a table, the matrix aligns true and predicted classes, assigning a cost value to each combination. For instance, in binary classification, it may distinguish costs for false positives and false negatives. The utility of the cost matrix lies in its application to calculate the expected cost or loss. The formula, expressed as a double summation, utilizes joint probabilities: Expected Loss = ∑ i ∑ j P ( Actual i , Predicted j ) ⋅ Cost Actual i , Predicted j {\displaystyle {\text{Expected Loss}}=\sum _{i}\sum _{j}P({\text{Actual}}_{i},{\text{Predicted}}_{j})\cdot {\text{Cost}}_{{\text{Actual}}_{i},{\text{Predicted}}_{j}}} Here, P ( Actual i , Predicted j ) {\displaystyle P({\text{Actual}}_{i},{\text{Predicted}}_{j})} denotes the joint probability of actual class i {\displaystyle i} and predicted class j {\displaystyle j} , providing a nuanced measure that considers both the probabilities and associated costs. This approach allows practitioners to fine-tune models based on the specific consequences of misclassifications, adapting to scenarios where the impact of prediction errors varies across classes. == Applications == === Fraud Detection === In the realm of data science, particularly in finance, cost-sensitive machine learning is applied to fraud detection. By assigning different costs to false positives and false negatives, models can be fine-tuned to minimize the overall financial impact of misclassifications. === Medical Diagnostics === In healthcare, cost-sensitive machine learning plays a role in medical diagnostics. The approach allows for customization of models based on the potential harm associated with misdiagnoses, ensuring a more patient-centric application of machine learning algorithms. == Challenges == A typical challenge in cost-sensitive machine learning is the reliable determination of the cost matrix which may evolve over time. == Literature == Cost-Sensitive Machine Learning. USA, CRC Press, 2011. ISBN 9781439839287 Abhishek, K., Abdelaziz, D. M. (2023). Machine Learning for Imbalanced Data: Tackle Imbalanced Datasets Using Machine Learning and Deep Learning Techniques. (n.p.): Packt Publishing. ISBN 9781801070881

  Read more →
• 

  Organizational information theory

  Organizational Information Theory (OIT) is a communication theory, developed by Karl Weick, offering systemic insight into the processing and exchange of information within organizations and among its members. Unlike the past structure-centered theory, OIT focuses on the process of organizing in dynamic, information-rich environments. Given that, it contends that the main activity of organizations is the process of making sense of equivocal information. Organizational members are instrumental to reduce equivocality and achieve sensemaking through some strategies — enactment, selection, and retention of information. With a framework that is interdisciplinary in nature, organizational information theory's desire to eliminate both ambiguity and complexity from workplace messaging builds upon earlier findings from general systems theory and phenomenology. == Inspiration and influence of pre-existing theories == 1. General Systems Theory The General Systems Theory, on its most basic premise, describes the phenomenon of a cohesive group of interrelated parts. When one part of the system is changed or affected, it will affect the system as a whole. Weick uses this theoretical framework from 1950 to influence his organizational information theory. Likewise, organizations can be viewed as a system of related parts that work together towards a common goal or vision. Applying this to Weick's organizational information theory, organizations must work to reduce ambiguity and complexity in the workplace to maximize cohesiveness and efficiency. Weick uses the term, coupling, to describe how organizations, like a system, can be composed of interrelated and dependent parts. Coupling looks at the relationship between people and work. There are two types of coupling: 1. Loose coupling Loose coupling describes that while people within the organization or system are connected and often work together, they do not depend on one another to continue or fully complete individual work. The dependencies are weak and workflow is flexible. For example, "if the whole Science department completely shuts down because all of teachers are sick or for whatsoever reason, the school can still continue to operate because other departments are still present." 2. Tight coupling Tight coupling describes when connections within an organization are strong and dependent. If one part of the organization is not operating correctly, the organization as a whole cannot continue to their fullest potential. " For instance, the format and ink section completely shuts down hence the succeeding steps cannot be continued, so the whole process of the organization will be dropped. Thus, components of a system are directly dependent on one another." 2. Theory of evolution The theory of evolution, by Charles Darwin, is a framework for survival of the fittest. According to Darwin, organisms attempt to adapt and live in an unforgiving environment. Those that are unsuccessful in adaptation do not survive, while the strong organisms continue to thrive and reproduce. Weick invokes inspiration from Darwin, to incorporate a biological perspective to his theory. It is natural for organizations to have to adapt to incoming information that often interfere with the preexisting environment. Organizations that are able to plan and alter strategies in accordance with their constant need of organizing and sense making, will survive and be the most successful. However, there is a notable difference between animal evolution and survival of the fittest in organizations, "A given animal is what it is; variation comes through mutation. But the nature of an organization can change when its members alter their behavior." == Assumptions == 1. Human organizations exist in an information environment Unlike senders and receivers models, OIT stands on the situational perspective. Karl Weick views a human organization as an open social system. People in that system develop a mechanism to establish goals, obtain and process information, or perceive the environment. In this process, people and the environment come to conclusions on "what's going on here?". Colville believes that this attributional process is retrospective. Take an education institution as an example. A university can obtain information regarding students' needs in numerous ways. It might create feedback section in its website. It could organize alumni panels or academic affairs to attract prospective students and collect concrete questions they are interested in. It may also conduct the survey or host focus group to get the information. After that, the staff of the university have to decide how to deal with these information, based on which, it has to set and accomplish its goals for current and prospective students. 2. The information an organization receives differs in terms of equivocality Weick posits that numerous feasible interpretations of reality exist when organizations process information. Their varying levels of understandability lead to different outcomes of information inputs. In other academic works, scholars tend to say that messages are uncertain or ambiguous. While according to OIT, messages are described to be equivocal. believes that people proactively exclude a number of possibilities to perceive what is going on in the environment. Due to OIT's situational perspective, the meanings of messages consist of the messages, the interpretations of receivers, and the interactional context. However, ambiguity and uncertainty can mean that a standard answer - the only one true objective interpretation - exists. Also, Weick emphasizes that "the equivocality is the engine that motivates people to organize". Maitlis and Christianson states that the equivocality trigger sensemaking for three reasons: environment jolts and organizational crises, threats to identity, and planned change interventions. 3. Human organizations engage in information processing to reduce equivocality of information Based upon the first two assumption, OIT proposes that information processing within organizations is a social activity. Sharing is the key feature of organizational information processing. In that particular context, members jointly make sense the reality by reducing equivocality. It other words, the sensemaking is a joint responsibility which includes numerous interdependent people to accomplish. In this process, organizations and its members combine actions and attributions together in order to find the balance between the complexity of thoughts and the simplicity of actions. Weick also proposes that people create their own environment though enactment, which is the action of making sense. This is because people have different perceptual schemas and selective perception, so people create different information environments. In creating different information environments, people can arrive at the same or close to the same understanding or solution through different thought processes and overall understanding. == Key concepts == === The organization === In order to place Weick's vision regarding Organizational Information Theory into proper working context, exploring his view regarding what constitutes the organization and how its individuals embody that construct might yield significant insights. From a fundamental standpoint, he shared a belief that organizational validation is derived---not through bricks and mortar, or locale—but from a series of events which enable entities to "collect, manage and use the information they receive." In elaborating further on what constitutes an organization during early writings outlining OIT, Weick said, "The word organization is a noun and it is also a myth. if one looks for an organization, one will not find it. What will be found is that there are events linked together, that transpire within concrete walls and these sequences, their pathways, their timing, are the forms we erroneously make into substances when we talk about an organization". When viewed in this modular fashion, the organization meets Weick's theoretical vision by encompassing parameters that are less bound by concrete, wood, and structural restraints and more by an ability to serve as a repository where information can be consistently and effectively channeled. Taking these defining characteristics into account, proper channel execution relies on maximization of messaging clarity, context, delivery and evolution through any system. One example as to how these interactions might unfold on a more granular level within these confines can be gleaned through Weick's double interact loop, which he considers the "building blocks of every organization". Simply put, double interacts describe interpersonal exchanges that, inherently, occur across the organizational chain of command and in life, itself. Thus: "An act occurs when you say something (Can I have a Popsicle?). An interact occurs when you say something and I respond ("No, it will spoil your dinner

  Read more →
• 

  Long division

  In arithmetic, long division is a standard division algorithm suitable for dividing multi-digit numbers that is simple enough to perform by hand. It breaks down a division problem into a series of easier steps. As in all division problems, one number, called the dividend, is divided by another, called the divisor, producing a result called the quotient. It enables computations involving arbitrarily large numbers to be performed by following a series of simple steps. The abbreviated form of long division is called short division, which is almost always used instead of long division when the divisor has only one digit. == History == Related algorithms have existed since the 12th century. Al-Samawal al-Maghribi (1125–1174) performed calculations with decimal numbers that essentially require long division, leading to infinite decimal results, but without formalizing the algorithm. Caldrini (1491) is the earliest printed example of long division, known as the Danda method in medieval Italy, and it became more practical with the introduction of decimal notation for fractions by Pitiscus (1608). The specific algorithm in modern use was introduced by Henry Briggs c. 1600. == Education == Inexpensive calculators and computers have become the most common tools for performing division in educational and professional contexts worldwide, reducing reliance on traditional paper-and-pencil techniques. Internally, these devices implement various division algorithms, many of which rely on iterative approximations and multiplication to improve computational efficiency. Educational approaches to teaching division vary across countries and regions, reflecting differing curricular priorities. In North America, long division has been de-emphasized or, in some cases, removed from portions of the curriculum as part of reform mathematics, which emphasizes conceptual understanding and the use of technology. In contrast, many education systems in Europe and Asia continue to emphasize mastery of standard algorithms, including long division, as a foundational arithmetic skill. For example, curricula in countries such as Japan and Germany typically introduce and reinforce long division during primary education, often alongside mental arithmetic strategies and problem-solving techniques. International assessments such as the Trends in International Mathematics and Science Study (TIMSS) highlight these differences, showing variation in how procedural fluency and conceptual understanding are balanced across educational systems. These differing approaches reflect broader educational philosophies regarding the balance between procedural fluency, conceptual understanding, and the role of technology in mathematics education. == Method == In English-speaking countries, long division does not use the division slash ⟨∕⟩ or division sign ⟨÷⟩ symbols but instead constructs a tableau. The divisor is separated from the dividend by a right parenthesis ⟨)⟩ or vertical bar ⟨|⟩; the dividend is separated from the quotient by a vinculum (i.e., an overbar). The combination of these two symbols is sometimes known as a long division symbol, division bracket, or even a bus stop. It developed in the 18th century from an earlier single-line notation separating the dividend from the quotient by a left parenthesis. The process is begun by dividing the left-most digit of the dividend by the divisor. The quotient (rounded down to an integer) becomes the first digit of the result, and the remainder is calculated (this step is notated as a subtraction). This remainder carries forward when the process is repeated on the following digit of the dividend (notated as 'bringing down' the next digit to the remainder). When all digits have been processed and no remainder is left, the process is complete. An example is shown below, representing the division of 500 by 4 (with a result of 125). 125 (Explanations) 4)500 4 ( 4 × 1 = 4) 10 ( 5 - 4 = 1) 8 ( 4 × 2 = 8) 20 (10 - 8 = 2) 20 ( 4 × 5 = 20) 0 (20 - 20 = 0) A more detailed breakdown of the steps goes as follows: Find the shortest sequence of digits starting from the left end of the dividend, 500, that the divisor 4 goes into at least once. In this case, this is simply the first digit, 5. The largest number that the divisor 4 can be multiplied by without exceeding 5 is 1, so the digit 1 is put above the 5 to start constructing the quotient. Next, the 1 is multiplied by the divisor 4, to obtain the largest whole number that is a multiple of the divisor 4 without exceeding the 5 (4 in this case). This 4 is then placed under and subtracted from the 5 to get the remainder, 1, which is placed under the 4 under the 5. Afterwards, the first as-yet unused digit in the dividend, in this case the first digit 0 after the 5, is copied directly underneath itself and next to the remainder 1, to form the number 10. At this point the process is repeated enough times to reach a stopping point: The largest number by which the divisor 4 can be multiplied without exceeding 10 is 2, so 2 is written above as the second leftmost quotient digit. This 2 is then multiplied by the divisor 4 to get 8, which is the largest multiple of 4 that does not exceed 10; so 8 is written below 10, and the subtraction 10 minus 8 is performed to get the remainder 2, which is placed below the 8. The next digit of the dividend (the last 0 in 500) is copied directly below itself and next to the remainder 2 to form 20. Then the largest number by which the divisor 4 can be multiplied without exceeding 20, which is 5, is placed above as the third leftmost quotient digit. This 5 is multiplied by the divisor 4 to get 20, which is written below and subtracted from the existing 20 to yield the remainder 0, which is then written below the second 20. At this point, since there are no more digits to bring down from the dividend and the last subtraction result was 0, we can be assured that the process finished. If the last remainder when we ran out of dividend digits had been something other than 0, there would have been two possible courses of action: We could just stop there and say that the dividend divided by the divisor is the quotient written at the top with the remainder written at the bottom, and write the answer as the quotient followed by a fraction that is the remainder divided by the divisor. We could extend the dividend by writing it as, say, 500.000... and continue the process (using a decimal point in the quotient directly above the decimal point in the dividend), in order to get a decimal answer, as in the following example. 31.75 4)127.00 12 (12 ÷ 4 = 3) 07 (0 remainder, bring down next figure) 4 (7 ÷ 4 = 1 r 3) 3.0 (bring down 0 and the decimal point) 2.8 (7 × 4 = 28, 30 ÷ 4 = 7 r 2) 20 (an additional zero is brought down) 20 (5 × 4 = 20) 0 In this example, the decimal part of the result is calculated by continuing the process beyond the units digit, "bringing down" zeros as being the decimal part of the dividend. This example also illustrates that, at the beginning of the process, a step that produces a zero can be omitted. Since the first digit 1 is less than the divisor 4, the first step is instead performed on the first two digits 12. Similarly, if the divisor were 13, one would perform the first step on 127 rather than 12 or 1. === Basic procedure for long division of n ÷ m === Find the location of all decimal points in the dividend n and divisor m. If necessary, simplify the long division problem by moving the decimals of the divisor and dividend by the same number of decimal places, to the right (or to the left), so that the decimal of the divisor is to the right of the last digit. When doing long division, keep the numbers lined up straight from top to bottom under the tableau. After each step, be sure the remainder for that step is less than the divisor. If it is not, there are three possible problems: the multiplication is wrong, the subtraction is wrong, or a greater quotient is needed. In the end, the remainder, r, is added to the growing quotient as a fraction, r⁄m. === Invariant property and correctness === The basic presentation of the steps of the process (above) focuses on what steps are to be performed, rather than the properties of those steps that ensure the result will be correct (specifically, that q × m + r = n, where q is the final quotient and r the final remainder). A slight variation of presentation requires more writing, and requires that we change, rather than just update, digits of the quotient, but can shed more light on why these steps actually produce the right answer by allowing evaluation of q × m + r at intermediate points in the process. This illustrates the key property used in the derivation of the algorithm (below). Specifically, we amend the above basic procedure so that we fill the space after the digits of the quotient under construction with 0's, to at least the 1's place, and include those 0's in the numbers we write below the division bra

  Read more →
• 

  Tertiary source

  A tertiary source is an index or textual consolidation of already published primary and secondary sources that does not provide additional interpretations or analysis of the sources. Some tertiary sources can be used as an aid to find key (seminal) sources, key terms, general common knowledge and established mainstream science on a topic. The exact definition of tertiary varies by academic field. Academic research standards generally do not accept tertiary sources such as encyclopedias as citations, although survey articles are frequently cited rather than the original publication. == Overlap with secondary sources == As is also the case with distinguishing primary and secondary sources in some disciplines, there is not always a clear distinguishing line between secondary and tertiary sources. Depending on the topic of research, a scholar may use a bibliography, dictionary, or encyclopedia as either a tertiary or a secondary source. This causes some difficulty in defining many sources as either one type or the other. In some academic disciplines, the differentiation between a secondary and tertiary source is relative. In the United Nations International Scientific Information System (UNISIST) model, a secondary source is a bibliography, whereas a tertiary source is a synthesis of primary sources. == Types of tertiary sources == Tertiary sources can come in book form or as an online resource. Tertiary sources in book form are frequently organised in alphabetical order, whereas an online tertiary source may be searchable by keyword. Examples of tertiary sources include; reference books, encyclopedias, dictionaries, some textbooks, abstracts, directories, factbooks, handbooks, manuals and compendia. Indexes, bibliographies, concordances, and databases are aggregates of primary and secondary sources and therefore often considered tertiary sources. They may also serve as a point of access to the full or partial text of primary and secondary sources. Almanacs, travel guides, field guides, and timelines are also examples of tertiary sources. Tertiary sources attempt to summarize, collect, and consolidate the source materials into an overview without adding analysis and synthesis of new conclusions. Wikipedia is a tertiary source.

  Read more →
• 

  XLeratorDB

  XLeratorDB is a suite of database function libraries that enable Microsoft SQL Server to perform a wide range of additional (non-native) business intelligence and ad hoc analytics. The libraries, which are embedded and run centrally on the database, include more than 450 individual functions similar to those found in Microsoft Excel spreadsheets. The individual functions are grouped and sold as six separate libraries based on usage: finance, statistics, math, engineering, unit conversions and strings. WestClinTech, the company that developed XLeratorDB, claims it is "the first commercial function package add-in for Microsoft SQL Server." == Company history == WestClinTech (LLC), founded by software industry veterans Charles Flock and Joe Stampf in 2008, is located in Irvington, New York, United States. Flock was a co-founder of The Frustum Group, developer of the OPICS enterprise banking and trading platform, which was acquired by London-based Misys, PLC in 1996. Stampf joined Frustum in 1994 and with Flock remained active with the company after acquisition, helping to develop successive generations of OPICS now employed by over 150 leading financial institutions worldwide. Following a full year of research, development and testing, WestClinTech introduced and recorded its first commercial sale of XLeratorDB in April 2009. In September 2009, XLeratorDB became available to all Federal agencies through NASA's Strategic Enterprise-Wide Procurement (SEWP-IV) program, a government-wide acquisition contract. == Technology == XLeratorDB uses Microsoft SQL CLR(Common Language Runtime) technology. SQL CLR allows managed code to be hosted by, and run in, the Microsoft SQL Server environment. SQL CLR relies on the creation, deployment and registration of .NET Framework assemblies that are physically stored in managed code dynamic-link libraries (DLL). The assemblies may contain .NET namespaces, classes, functions, and properties. Because managed code compiles to native code prior to execution, functions using SQL CLR can achieve significant performance increases versus the equivalent functions written in T-SQL in some scenarios. XLeratorDB requires Microsoft SQL Server 2005 or SQL Server 2005 Express editions, or later (compatibility mode 90 or higher). The product installs with PERMISSION_SET=SAFE. SAFE mode, the most restrictive permission set, is accessible by all users. Code executed by an assembly with SAFE permissions cannot access external system resources such as files, the network, the internet, environment variables, or the registry. == Functions == In computer science, a function is a portion of code within a larger program which performs a specific task and is relatively independent of the remaining code. As used in database and spreadsheet applications these functions generally represent mathematical formulas widely used across a variety of fields. While this code may be user-generated, it is also embedded as a pre-written sub-routine in applications. These functions are typically identified by common nomenclature which corresponds to their underlying operations: e.g. IRR identifies the function which calculates Internal Rate of Return on a series of periodic cash flows. === Function uses === As subroutines, functions can be integrated and used in a variety of ways, and as part of larger, more complicated applications. Within large enterprise applications they may, for example, play an important role in defining business rules or risk management parameters, while remaining virtually invisible to end users. Within database management systems and spreadsheets, however, these kinds of functions also represent discrete sets of tools; they can be accessed directly and utilized on a stand-alone basis, or in more complex, user-defined configurations. In this context, functions can be used for business intelligence and ad hoc analysis of data in fields such as finance, statistics, engineering, math, etc. === Function types === XLeratorDB uses three kinds of functions to perform analytic operations: scalar, aggregate, and a hybrid form which WestClinTech calls Range Queries. Scalar functions take a single value, perform an operation and return a single value. An example of this type of function is LOG, which returns the logarithm of a number to a specified base. Aggregate functions operate on a series of values but return a single, summarizing value. An example of this type of function is AVG, which returns the average of values in a specified group. In XLeratorDB there are some functions which have characteristics of aggregate functions (operating on multiple series of values) but cannot be processed in SQL CLR using single column inputs, such as AVG does. For example, irregular internal rate of return (XIRR), a financial function, operates on a collection of cash flow values from one column, but must also apply variable period lengths from another column and an initial iterative assumption from a third, in order to return a single, summarizing value. WestClinTech documentation notes that Range Queries specify the data to be included in the result set of the function independently of the WHERE clause associated with the T-SQL statement, by incorporating a SELECT statement into the function as a string argument; the function then traps that SELECT statement, executes it internally and processes the result. Some XLeratorDB functions that employ Range Queries are: NPV, XNPV, IRR, XIRR, MIRR, MULTINOMIAL, and SERIESSUM. Within the application these functions are identified by a "_q" naming convention: e.g. NPV_q, IRR_q, etc. == Analytic functions == === SQL Server functions === Microsoft SQL Server is the #3 selling database management system (DBMS), behind Oracle and IBM. (While versions of SQL Server have been on the market since 1987, XLeratorDB is compatible with only the 2005 edition and later.) Like all major DBMS, SQL Server performs a variety of data mining operations by returning or arraying data in different views (also known as drill-down). In addition, SQL Server uses Transact-SQL (T-SQL) to execute four major classes of pre-defined functions in native mode. Functions operating on the DBMS offer several advantages over client layer applications like Excel: they utilize the most up-to-date data available; they can process far larger quantities of data; and, the data is not subject to exporting and transcription errors. SQL Server 2008 includes a total of 58 functions that perform relatively basic aggregation (12), math (23) and string manipulation (23) operations useful for analytics; it includes no native functions that perform more complex operations directly related to finance, statistics or engineering. === Excel functions === Microsoft Excel, a component of Microsoft Office suite, is one of the most widely used spreadsheet applications on the market today. In addition to its inherent utility as a stand-alone desktop application, Excel overlaps and complements the functionality of DBMS in several ways: storing and arraying data in rows and columns; performing certain basic tasks such as pivot table and aggregating values; and facilitating sharing, importing and exporting of database data. Excel's chief limitation relative to a true database is capacity; Excel 2003 is limited to some 65k rows and 256 columns; Excel 2007 extends this capacity to roughly 1million rows and 16k columns. By comparison, SQL Server is able to manage over 500k terabytes of memory. Excel offers, however, an extensive library of specialized pre-written functions which are useful for performing ad hoc analysis on database data. Excel 2007 includes over 300 of these pre-defined functions, although customized functions can also be created by users, or imported from third party developers as add-ons. Excel functions are grouped by type: === Excel business intelligence functions === Operating on the client computing layer Excel plays an important role as a business intelligence tool because it: performs a wide array of complex analytic functions not native to most DBMS software offers far greater ad hoc reporting and analytic flexibility than most enterprise software provides a medium for sharing and collaborating because of its ubiquity throughout the enterprise Microsoft reinforces this positioning with Business Intelligence documentation that positions Excel in a clearly pivotal role. === XLeratorDB vs. Excel functions === While operating within the database environment, XLeratorDB functions utilize the same naming conventions and input formats, and in most cases, return the same calculation results as Excel functions. XLeratorDB, coupled with SQL Server's native capabilities, compares to Excel's function sets as follows:

  Read more →
• 

  SQL/PSM

  SQL/PSM (SQL/Persistent Stored Modules) is an ISO standard mainly defining an extension of SQL with a procedural language for use in stored procedures. Initially published in 1996 as an extension of SQL-92 (ISO/IEC 9075-4:1996, a version sometimes called PSM-96 or even SQL-92/PSM), SQL/PSM was later incorporated into the multi-part SQL:1999 standard, and has been part 4 of that standard since then, most recently in SQL:2023. The SQL:1999 part 4 covered less than the original PSM-96 because the SQL statements for defining, managing, and invoking routines were actually incorporated into part 2 SQL/Foundation, leaving only the procedural language itself as SQL/PSM. The SQL/PSM facilities are still optional as far as the SQL standard is concerned; most of them are grouped in Features P001-P008. SQL/PSM standardizes syntax and semantics for control flow, exception handling (called "condition handling" in SQL/PSM), local variables, assignment of expressions to variables and parameters, and (procedural) use of cursors. It also defines an information schema (metadata) for stored procedures. SQL/PSM is one language in which methods for the SQL:1999 structured types can be defined. The other is Java, via SQL/JRT. SQL/PSM is derived, seemingly directly, from Oracle's PL/SQL. Oracle developed PL/SQL and released it in 1991, basing the language on the US Department of Defense's Ada programming language. However, Oracle has maintained a distance from the standard in its documentation. IBM's SQL PL (used in DB2) and Mimer SQL's PSM were the first two products officially implementing SQL/PSM. It is commonly thought that these two languages, and perhaps also MySQL/MariaDB's procedural language, are closest to the SQL/PSM standard. However, a PostgreSQL addon implements SQL/PSM (alongside its other procedural languages like the PL/SQL-derived plpgsql), although it is not part of the core product. RDF functionality in OpenLink Virtuoso was developed entirely through SQL/PSM, combined with custom datatypes (e.g., ANY for handling URI and Literal relation objects), sophisticated indexing, and flexible physical storage choices (column-wise or row-wise).

  Read more →
• 

  The Citation Project

  The Citation Project is a series of studies that measure and analyze first-year college writing students' source use and their ability to understand and implement sources within their own writing. The Citation Project reveals students' source-use habits and the issues that can be seen based on their lack of proper citation skills, such as the prevalence of plagiarism, institution policies, and the results of current writing pedagogy. The Citation Project's central findings were first presented at the Conference on College Composition and Communication in 2012. Although The Citation Project originally referred to this single 2012 study, the feedback received led to the conception of the Project as a broader initiative and as a place to gather and publish studies and data relating to student writing habits for the usage of other researches. == Method == The Citation Project's data comes from the work of 20 researchers analyzing 174 first-year composition students' research papers. The student papers studied originated from 16 institutions across the United States of America, including community colleges, public and private universities, denominational colleges, and Ivy Leagues. Researchers used bibliographic coding to aggregate data regarding the type, length, reading level, and usage of students' sources. == Findings == === Student source assessment and use === This study found that students were capable of identifying, locating, and accessing librarian-approved academic sources, most commonly accessing them with the internet. Despite students demonstrating their ability to find appropriate sources, they tend to exclusively cite the first few pages of their sources. Students' use and analysis of their citations are often limited, frequently resorting to patchwriting, directly restating their source's points, and omitting their own interpretations of their reference's ideas. The Citation Project also highlights students' struggle to accurately determine, address, and value their sources' bias, authority, and credibility. According to the Project's researchers' analysis, these habits demonstrate that first-year college writing students minimally engage with their sources and the academic conversations between them. One researcher from the Citation Project, Rebecca Moore Howard, believes these findings do not point towards students being lazy, but is rather a result of a writing pedagogy that prioritizes efficient, product-focused writing. Another interpretation offered by Sandra Jamieson, another researcher from the Citation Project explains their findings as a result of a lack of adherence to Information Learning (IL) Standards. === Pedagogy === A significant focus of The Citation Project is the development of pedagogical practices intended to equip students with writing and research techniques that will set them up for future success. Writers associated with The Citation Project, such as Tricia Serviss, believe that the practices of teachers surrounding academic integrity and writing practices are what form the foundation of how students think about writing and how to engage with assignments throughout their academic career. They also stress the importance of teaching students to effectively engage with sources rather than simply how to correctly cite them. The Citation Project asserts that endowing students with the ability to read, understand, and synthesize a variety of sources in their writing is a skill that will benefit them throughout their academic careers, and that the surface level typographical focus that many writing programs utilize is inadequate. == Plagiarism == One of the areas that The Citation Project also looks at is how students commit plagiarism throughout their writing. Plagiarism tends to be a checkpoint that gives instructors a sense where students' citation skills stand. Findings from The Citation Project reveal that the most common type of plagiarism is patchwriting which is the act of using the same sentence with only changing a couple of words. These types of issues can be seen as a learning curve due to lack of proper training. Student's that commit plagiarism are often unaware. === Policies === Another issue found is that academic plagiarism policies may not benefit a student's growth but may instead obstruct it. Policies against plagiarism tend to be harsh on the student that committed of offense. Even though student plagiarism is often unintentional academic institutions see this behavior as intentional. Student may then face harsh consequences as a result from their lack of citation knowledge. Additionally, higher level institutions assume that new students already have the skill set to avoid plagiarism which may be an unrealistic expectation. == Legacy == === Inspired studies === ==== Parrott and Napier ==== In one study, "Critical Reading and Student Self-Selected Texts: Results of a Collaborative, Explicit Curricular Approach," Jill Parrot and Trenia Napier quoted the Citation Project's findings as evidence that current collegiate writing curriculums are an ineffective means of teaching students how to properly write academic research papers. The researchers accredited current writing pedagogy's lack of emphasis on teaching critical reading skills. Parrott and Napier tested their thesis by seeing if students would produce more academic writing if they partook in a writing course that taught critical reading. Their results mostly went against this hypothesis, finding students who received additional critical reading training only significantly improved in how they integrated their sources. ==== Kocatepe ==== In May Mehtap Kocatep's study, "Reconceptualising the notion of finding information: How undergraduate students construct information as they read-to-write in an academic writing class," Kocatep expresses that she believes current conversations around writing pedagogy, including the Citation Project, operate with the underlying misconception that information is an easily discoverable static entity and its retrieval is an objective, unbiased decision. Kocatepe instead offers the analysis of what students view as valuable information and if it is worth using is influenced by the socially constructed meanings available to writers at the moment. To further examine students' source engagement, Kocatepe did a study on how female university students from the United Arab Emirates find, retrieve, use, and value sources. Kocatepe's results mainly noted students' almost exclusive reliance on using Google to find sources, as well as how students' navigated mainly English-speaking academic conversations as non-native English speakers. ==== Dahlen, Nordstrom-Sanchez, and Graff ==== Dahlen, Nordstrom-Sanchez, and Graff built their study off The Citation Project research in order to explore the attitudes and practices of students in an undergraduate writing course. As the researchers acknowledge, data collected by the Citation Project was the subject of the bulk of their analysis. This study sought to examine undergraduate writing practices tied to source-usage and elucidate any relevant trends. Dahlen, Nordstrom-Sanchez and Graff found that undergraduate writing students were not engaging with outside sources properly. Key issues discussed include lack of engagement with broad source ideas (in favor of picking out quotes), lack of paraphrasing, and inability to link information between multiple sources. ==== Davis ==== Phillip M. Davis based much of the analysis in his study on data gathered by the Citation Project. This study aimed to examine the particular effects web-based research and study had on undergraduate's papers and the replicability of their bibliographies. Davis sought to see how the shift from physical in-person library based research to online, often at-home research changed the function and usability of the bibliography as a form of documenting source usage in a given work. The primary method of analysis involved examining students' bibliographies to see where they were finding information online and how these sources were accessed. A main issue Davis found was "persistency" of URLs used for online citations. He found that only 18% of URL-based citations continued to function (the others either no longer pointing to the correct document or ceasing to exist altogether) within 3 years of their usage by students, and more than half of claimed online citations could not be found in any form. He suggests that this result brings up questions about how web-based citations should be dealt with in a university context.

  Read more →
• 

  Master data management

  Master data management (MDM) is a discipline in which business and information technology collaborate to ensure the uniformity, accuracy, stewardship, semantic consistency, and accountability of the enterprise's official shared master data assets. == Reasons for master data management == Data consistency and accuracy: MDM ensures that the organization's critical data is consistent and accurate across all systems, reducing discrepancies and errors caused by multiple, siloed copies of the same data. Improved decision-making: By providing a single version of the truth (SVOT), MDM enables organizations to deliver the right data to decision makers, allowing them to clearly understand business performance and make informed, data-driven decisions. Operational efficiency: With the consistent and accurate data provided by an MDM, operational processes such as reporting and inventory management can be automated to improve efficiency. Employee learning, onboarding, and customer service also become more efficient, as MDM data facilitates rapid, accurate, and thorough information retrieval, permitting more employee time to be spent on work. Regulatory compliance: MDM tries to help organizations comply with industry standards and regulations by ensuring that master data is accurately recorded, maintained, and audited. However, issues with data quality, classification, and reconciliation may require data transformation. As with other Extract, Transform, Load-based data movements, these processes are expensive and inefficient, reducing return on investment for a project. == Business unit and product line segmentation == As a result of business unit and product line segmentation, the same entity (whether a customer, supplier, or product) will be included in different product lines. This leads to data redundancy and even confusion. For example, a customer takes out a mortgage at a bank. If the marketing and customer service departments have separate databases, advertisements might still be sent to the customer, even though they've already signed up. The two parts of the bank are unaware, and the customer is sent irrelevant communications. Record linkage can associate different records corresponding to the same entity, mitigating this issue. == Mergers and acquisitions == One of the most common problems for master data management is company growth through mergers or acquisitions. Reconciling these separate master data systems can present difficulties, as existing applications have dependencies on the master databases. Ideally, database administrators resolve this problem through deduplication of the master data as part of the merger. Over time, as further mergers and acquisitions occur, the problem can multiply. Data reconciliation processes can become extremely complex or even unreliable. Some organizations end up with 10, 15, or even 100 separate and poorly integrated master databases. This can cause serious problems in customer satisfaction, operational efficiency, decision support, and regulatory compliance. Another problem involves determining the proper degrees of detail and normalization to include in the master data schema. For example, in a federated Human Resources environment, the enterprise software may focus on storing people's data as current status, adding a few fields to identify the date of hire, date of last promotion, etc. However, this simplification can introduce business-impacting errors into dependent systems for planning and forecasting. The stakeholders of such systems may be forced to build a parallel network of new interfaces to track the onboarding of new hires, planned retirements, and divestment, which works against one of the aims of master data management. == People, processes and technology == Master data management is enabled by technology, but is more than the technologies that enable it. An organization's master data management capability will also include people and processes in its definition. === People === Several roles should be staffed within MDM. Most prominently, the Data Owner and the Data Steward. Several people would likely be allocated to each role and each person responsible for a subset of Master Data (e.g. one data owner for employee master data, another for customer master data). The Data Owner is responsible for the requirements for data definition, data quality, data security, etc. as well as for compliance with data governance and data management procedures. The Data Owner should also be funding improvement projects in case of deviations from the requirements. The Data Steward is running the master data management on behalf of the data owner and probably also being an advisor to the Data Owner. === Processes === Master data management can be viewed as a "discipline for specialized quality improvement" defined by the policies and procedures put in place by a data governance organization. It has the objective of providing processes for collecting, aggregating, matching, consolidating, quality-assuring, persisting and distributing master data throughout an organization to ensure a common understanding, consistency, accuracy and control, in the ongoing maintenance and application use of that data. Processes commonly seen in master data management include source identification, data collection, data transformation, normalization, rule administration, error detection and correction, data consolidation, data storage, data distribution, data classification, taxonomy services, item master creation, schema mapping, product codification, data enrichment, hierarchy management, business semantics management and data governance. === Technology === A master data management tool can be used to support master data management by removing duplicates, standardizing data (mass maintaining), and incorporating rules to eliminate incorrect data from entering the system to create an authoritative source of master data. Master data are the products, accounts, and parties for which the business transactions are completed. Where the technology approach produces a "golden record" or relies on a "source of record" or "system of record", it is common to talk of where the data is "mastered". This is accepted terminology in the information technology industry, but care should be taken, both with specialists and with the wider stakeholder community, to avoid confusing the concept of "master data" with that of "mastering data". ==== Implementation models ==== There are several models for implementing a technology solution for master data management. These depend on an organization's core business, its corporate structure, and its goals. These include: Source of record Registry Consolidation Coexistence Transaction/centralized ===== Source of record ===== This model identifies a single application, database, or simpler source (e.g. a spreadsheet) as being the "source of record" (or "system of record" where solely application databases are relied on). The benefit of this model is its conceptual simplicity, but it may not fit with the realities of complex master data distribution in large organizations. The source of record can be federated, for example by groups of attributes (so that different attributes of a master data entity may have different sources of record) or geographically (so that different parts of an organization may have different master sources). Federation is only applicable in certain use cases, where there is a clear delineation of which subsets of records will be found in which sources. The source of record model can be applied more widely than simply to master data, for example to reference data. ==== Transmission of master data ==== There are several ways in which master data may be collated and distributed to other systems. This includes: Data consolidation – The process of capturing master data from multiple sources and integrating it into a single hub (operational data store) for replication to other destination systems. Data federation – The process of providing a single virtual view of master data from one or more sources to one or more destination systems. Data propagation – The process of copying master data from one system to another, typically through point-to-point interfaces in legacy systems. == Change management in implementation == Challenges in adopting master data management within large organizations often arise when stakeholders disagree on a "single version of the truth" concept is not affirmed by stakeholders, who believe that their local definition of the master data is necessary. For example, the product hierarchy used to manage inventory may be entirely different from the product hierarchies used to support marketing efforts or pay sales representatives. It is above all necessary to identify if different master data is genuinely required. If it is required, then the solution implemented (technology and process) must be able to allow multiple versions of the truth to exist but will prov

  Read more →
• 

  Lexxe

  Lexxe is an internet search engine that applies Natural Language Processing in its semantic search technology. Founded in 2005 by Dr. Hong Liang Qiao, Lexxe is based in Sydney, Australia. Today, Lexxe's key focus is on sentiment search with the launch of a news sentiment search site at News & Moods (www.newsandmoods.com). Lexxe has experienced several stages of change of focus in search technology: Lexxe launched its Alpha version in 2005, featuring Natural Language question answering (i.e. users could ask questions in English to the search engine apart from keyword searches — this feature has been suspended for redevelopment since 2010). It used only algorithms to extract answers from web pages, with no question-answer pair databases prepared in advance. In 2011, Lexxe launched a beta version with a new search technology called Semantic Key. Semantic Keys enable users to query with a conceptual keyword (or a keyword with a special meaning, hence the term Semantic Key) in order to find instances under the concept, e.g. price → $5.95 or €200, color → red, yellow, white. For example, “price: a pound of apples”, “color: ferrari”. With initial 500 Semantic Keys at the Beta launch, Lexxe became the first search engine in the world to offer this unique and useful search technology to the users. The cost of building Semantic Keys was too heavy though. In 2017, Lexxe launched News & Moods (www.newsandmoods.com), an open platform for news sentiment search, a first step towards sentiment search feature for the entire Internet search in Lexxe search engine. News & Moods also comes with smartphone apps in Android and iOS.

  Read more →
• 

  Manhattan address algorithm

  The Manhattan address algorithm is a series of formulas used to estimate the closest east–west cross street for building numbers on north–south avenues in the New York City borough of Manhattan. == Algorithm == To find the approximate number of the closest cross street, divide the building number by a divisor (generally 20) and add (or subtract) the "tricky number" from the table below: For the north–south avenues, there are typically 20 address numbers between consecutive east–west streets (10 on either side of the avenue). A standard land lot on each avenue was originally 20 feet (6.1 m) wide, and there is about 200 feet (61 m) between each pair of east–west streets, for ten land lots between each pair of streets. The exceptions are Riverside Drive, as well as Fifth Avenue and Central Park West between 59th and 110th streets, which use a divisor of 10. These avenues all have buildings only on one side of the street, with a park on the other side. The "tricky number" often corresponds to a street near the southern end of the avenue. There are some notable exceptions: York Avenue address numbers are continuations of Avenue A address numbers, since the avenue was originally called Avenue A. East End Avenue address numbers are continuations of Avenue B address numbers, since the avenue was originally called Avenue B. Sixth Avenue and Broadway start south of Houston Street, the southern boundary of the Manhattan street numbering system. Although Park Avenue's southern terminus is at 32nd Street, a homeowner at 34th Street wanted the address "1 Park Avenue" (this was later changed). === Examples === For example, if you are at 62 Avenue B, 62 ÷ 20 ≈ 3 {\displaystyle 62\div 20\approx 3} , then add the "tricky number" 3 {\displaystyle 3} to give 6 {\displaystyle 6} . The nearest cross street to 62 Avenue B is East 6th Street. If you are at 78 Riverside Drive, 78 ÷ 10 ≈ 8 {\displaystyle 78\div 10\approx 8} , then add the "tricky number" 72 {\displaystyle 72} to give 80 {\displaystyle 80} . The nearest cross street to 78 Riverside Drive is West 80th Street. If you are at 501 5th Avenue, 501 ÷ 20 ≈ 25 {\displaystyle 501\div 20\approx 25} , then add the "tricky number" 18 {\displaystyle 18} to give 43 {\displaystyle 43} . The nearest cross street to 501 5th Avenue is actually 42nd Street, not 43rd Street, as the Manhattan address algorithm only gives approximate answers.

  Read more →
• 

  Small Data

  Small Data: the Tiny Clues that Uncover Huge Trends is Martin Lindstrom's seventh book. It chronicles his work as a branding expert, working with consumers across the world to better understand their behavior. The theory behind the book is that businesses can better create products and services based on observing consumer behavior in their homes, as opposed to relying solely on big data. == Content == The book is based on a several year period of consumer studies for major corporations across the globe. It features case studies of the author's work interviewing consumers in their homes and using his observations to create hypotheses as to why they use products the way that they do. == Public reception == The book was a New York Times Bestseller upon release and was positively reviewed on several websites, Including Entrepreneur and Forbes. In 2016, it was named a Best Business Book by strategy+business and one of Inc. Magazine's Best Sales and Marketing books.

  Read more →