AI Art Generator

AI Art Generator — hands-on reviews, top picks, pricing, pros and cons and a practical how-to guide on Aizhi.

TeaOnHer

TeaOnHer is a male-oriented dating surveillance mobile app that allows men to anonymously rate and comment on women they are dating. It was set up in response to the existence of Tea, a female-oriented dating app that allowed women to rate and comment on men. In 2025, Cosmopolitian magazine described it as America's second most popular mobile app, with it being the second most popular app in the lifestyle section of Apple's App Store. The TeaOnHer app has fewer features than the rival Tea app, focusing instead on anonymous commenting. It is listed as having been developed by a company called Newville Media Corporation. TechCrunch reported in 2025 that TeaOnHer had leaked credentials of some of its users.
Read more →
Vulnerability Discovery Model

A Vulnerability Discovery Model (VDM) uses discovery event data with software reliability models for predicting the same. A thorough presentation of VDM techniques is available in. Numerous model implementations are available in the MCMCBayes open source repository. Several VDM examples include: Alhazmi-Malaiya: Time based model (Alhazmi-Malaiya Logistic (AML) model) Alhazmi-Malaiya: Effort based model Rescorla: Quadratic Model and Exponential Model Anderson: Thermodynamic Model Kim: Weibull Model Linear Model Hump-Shaped Model Independent and Dependent Model Vulnerability Discovery Modeling using Bayesian model averaging Multivariate Vulnerability Discovery Models
Read more →
Blanking (video)

In analog video, blanking occurs between horizontal lines and between frames. In raster scan equipment, an image is built up by scanning an electron beam from left to right across a screen to produce a visible trace of one scan line, reducing the brightness of the beam to zero (horizontal blanking), moving it back as fast as possible to the left of the screen at a slightly lower position (the next scan line), restoring the brightness, and continuing until all the lines have been displayed and the beam is at the bottom right of the screen. Its intensity is then reduced to zero again (vertical blanking), and it is rapidly moved to the top left to start again, creating the next frame. In television, in particular, the vertical blanking interval is long to accommodate the slow equipment available at the time the standard was set. Fast modern electronics allows digital information to be encoded into the signal during the vertical blanking interval; it is not displayed on screen as the beam is blanked, but can be processed by appropriate circuitry.
Read more →
List of color palettes

The following is a list that contains color palettes for notable computer graphics, terminals and video game consoles. Only a simulated image using a palette and its name are given. Main articles are linked from the name of each palette, test charts, sample colours, simulated images, and further technical details (including references). During older eras of computing, manufacturers developed many different display systems often in a competitive, non-collaborative basis (with a few exceptions in the VESA consortium), creating many proprietary, non-standard different instances of display hardware. Often, as with early personal and home computers, a given machine employed its unique display subsystem, also with its unique color palette. Furthermore, software developers had made use of the color abilities of distinct display systems in many different ways. The result is that there is no single common standard nomenclature or classification taxonomy which can encompass every computer color palette. In order to organize the material, color palettes have been grouped following certain criteria. First, generic monochrome and full RGB repertories common to various computer display systems are listed. Then, usual color repertories used for display systems that employ indexed color techniques. And finally, specific manufacturers' color palettes implemented in many representative early personal computers and video game consoles of various brands. The list for personal computer palettes is split into two categories: 8-bit and 16-bit machines. This is not intended as a true strict categorization of such machines, because mixed architectures also exist (16-bit processors with an 8-bit data bus or 32-bit processors with a 16-bit data bus, among others). The distinction is based more on broad 8-bit and 16-bit computer ages or generations (around 1975–1985 and 1985–1995, respectively) and their associated state of the art in color display capabilities. The following is the common color test chart and sample image used to render each palette in this list: See further details in the summary paragraph of the corresponding article. == List of monochrome and RGB palettes == In this article, the term monochrome palette means a set of intensities for a monochrome display, and the term RGB palette is defined as the complete set of combinations a given RGB display can offer by mixing all the possible intensities of the red, green, and blue primaries available in its hardware. These are generic complete repertories of colors to produce black and white and RGB color pictures by the display hardware, not necessarily the total number of such colors that can be simultaneously displayed in a given text or graphic mode of any machine. RGB is the most common method to produce colors for displays; so these complete RGB color repertories have every possible combination of R-G-B triplets within any given maximum number of levels per component. For specific hardware and different methods to produce colors than RGB, see the List of computer hardware palettes and the List of video game consoles sections. For various software arrangements and sorts of colors, including other possible full RGB arrangements within 8-bit depth displays, see the List of software palettes section. === Monochrome palettes === These palettes only have shades of gray. === Dichrome palettes === Each permuted pair of red, green, and blue (16-bit color palette, with 65,536 colors). For example, "additive red green" has zero blue and "subtractive red green" has full blue. === Regular RGB palettes === These full RGB palettes employ the same number of bits to store the relative intensity for the red, green and blue components of every image's pixel color. Thus, they have the same number of levels per channel and the total number of possible colors is always the cube of a power of two. It should be understood that 'when developed' many of these formats were directly related to the size of some host computers 'natural word length' in bytes—the amount of memory in bits held by a single memory address such that the CPU can grab or put it in one operation. === Non-regular RGB palettes === These are also RGB palettes, in the sense defined above (except for 4-bit RGBI, which has an intensity bit that affects all channels at once), but either they do not have the same number of levels for each primary channel, or the numbers are not powers of two, so are not represented as separate bit fields. All of these have been used in popular personal computers. == List of software palettes == Systems that use a 4-bit or 8-bit pixel depth can display up to 16 or 256 colors simultaneously. Many personal computers in the later 1980s and early 1990s displayed at most 256 different colors, freely selected by software (either by the user or by a program) from their wider hardware's color palette. Usual selections of colors in limited subsets (generally 16 or 256) of the full palette includes some RGB level arrangements commonly used with the 8 bpp palettes as master palettes or universal palettes (i.e., palettes for multipurpose uses). These are some representative software palettes, but any selection can be made in such types of systems. === System specific palettes === These are selections of colors officially employed as system palettes in some popular operating systems for personal computers that feature 8-bit displays. === RGB arrangements === These are selections of colors based on evenly ordered RGB levels, mainly used as master palettes to display any kind of image within the limitations of the 8-bit pixel depth. === Other common uses of software palettes === == List of computer hardware palettes == In old personal computers and terminals that offered color displays, some color palettes were chosen algorithmically to provide the most diverse set of colors for a given palette size, and others were chosen to assure the availability of certain colors. In many early home computers, especially when the palette choices were determined at the hardware level by resistor combinations, the palette was determined by the manufacturer. Many early models output composite video colors. When seen on TV devices, the perception of the colors may not correspond with the value levels for the color values employed (most noticeable with NTSC TV color system). For current RGB display systems for PCs (Super VGA, etc.), see the 16-bit RGB and 24-bit RGB for High Color (thousands) and True Color (millions of colors) modes. For video game consoles, see the List of video game consoles section. For every model, their main different graphical color modes are listed based exclusively in the way they handle colors on screen, not all their different screen modes. The list is organized roughly historically by video hardware, not by branch. They are listed according to the original model of each system, which means that extended versions, clones, and compatibles also support the original palette. === Terminals and 8-bit machines === === 16-bit machines === === Video game console palettes === Color palettes of some of the most popular video game consoles. The criteria are the same as those of the List of computer hardware palettes section.
Read more →
Apprenticeship learning

In artificial intelligence, apprenticeship learning (or learning from demonstration or imitation learning) is the process of learning by observing an expert. It can be viewed as a form of supervised learning, where the training dataset consists of task executions by a demonstration teacher. == Mapping function approach == Mapping methods try to mimic the expert by forming a direct mapping either from states to actions, or from states to reward values. For example, in 2002 researchers used such an approach to teach an AIBO robot basic soccer skills. === Inverse reinforcement learning approach === Inverse reinforcement learning (IRL) is the process of deriving a reward function from observed behavior. While ordinary "reinforcement learning" involves using rewards and punishments to learn behavior, in IRL the direction is reversed, and a robot observes a person's behavior to figure out what goal that behavior seems to be trying to achieve. The IRL problem can be defined as: Given 1) measurements of an agent's behaviour over time, in a variety of circumstances; 2) measurements of the sensory inputs to that agent; 3) a model of the physical environment (including the agent's body): Determine the reward function that the agent is optimizing. IRL researcher Stuart J. Russell proposes that IRL might be used to observe humans and attempt to codify their complex "ethical values", in an effort to create "ethical robots" that might someday know "not to cook your cat" without needing to be explicitly told. The scenario can be modeled as a "cooperative inverse reinforcement learning game", where a "person" player and a "robot" player cooperate to secure the person's implicit goals, despite these goals not being explicitly known by either the person nor the robot. In 2017, OpenAI and DeepMind applied deep learning to the cooperative inverse reinforcement learning in simple domains such as Atari games and straightforward robot tasks such as backflips. The human role was limited to answering queries from the robot as to which of two different actions were preferred. The researchers found evidence that the techniques may be economically scalable to modern systems. Apprenticeship via inverse reinforcement learning (AIRP) was developed by in 2004 Pieter Abbeel, Professor in Berkeley's EECS department, and Andrew Ng, Associate Professor in Stanford University's Computer Science Department. AIRP deals with "Markov decision process where we are not explicitly given a reward function, but where instead we can observe an expert demonstrating the task that we want to learn to perform". AIRP has been used to model reward functions of highly dynamic scenarios where there is no obvious reward function intuitively. Take the task of driving for example, there are many different objectives working simultaneously - such as maintaining safe following distance, a good speed, not changing lanes too often, etc. This task, may seem easy at first glance, but a trivial reward function may not converge to the policy wanted. One domain where AIRP has been used extensively is helicopter control. While simple trajectories can be intuitively derived, complicated tasks like aerobatics for shows has been successful. These include aerobatic maneuvers like - in-place flips, in-place rolls, loops, hurricanes and even auto-rotation landings. This work was developed by Pieter Abbeel, Adam Coates, and Andrew Ng - "Autonomous Helicopter Aerobatics through Apprenticeship Learning" === System model approach === System models try to mimic the expert by modeling world dynamics. == Plan approach == The system learns rules to associate preconditions and postconditions with each action. In one 1994 demonstration, a humanoid learns a generalized plan from only two demonstrations of a repetitive ball collection task. == Example == Learning from demonstration is often explained from a perspective that the working Robot-control-system is available and the human-demonstrator is using it. And indeed, if the software works, the Human operator takes the robot-arm, makes a move with it, and the robot will reproduce the action later. For example, he teaches the robot-arm how to put a cup under a coffeemaker and press the start-button. In the replay phase, the robot is imitating this behavior 1:1. But that is not how the system works internally; it is only what the audience can observe. In reality, Learning from demonstration is much more complex. One of the first works on learning by robot apprentices (anthropomorphic robots learning by imitation) was Adrian Stoica's PhD thesis in 1995. In 1997, robotics expert Stefan Schaal was working on the Sarcos robot-arm. The goal was simple: solve the pendulum swingup task. The robot itself can execute a movement, and as a result, the pendulum is moving. The problem is, that it is unclear what actions will result into which movement. It is an Optimal control-problem which can be described with mathematical formulas but is hard to solve. The idea from Schaal was, not to use a Brute-force solver but record the movements of a human-demonstration. The angle of the pendulum is logged over three seconds at the y-axis. This results into a diagram which produces a pattern. In computer animation, the principle is called spline animation. That means, on the x-axis the time is given, for example 0.5 seconds, 1.0 seconds, 1.5 seconds, while on the y-axis is the variable given. In most cases it's the position of an object. In the inverted pendulum it is the angle. The overall task consists of two parts: recording the angle over time and reproducing the recorded motion. The reproducing step is surprisingly simple. As an input we know, in which time step which angle the pendulum must have. Bringing the system to a state is called “Tracking control” or PID control. That means, we have a trajectory over time, and must find control actions to map the system to this trajectory. Other authors call the principle “steering behavior”, because the aim is to bring a robot to a given line.
Read more →
Resilience week

Resilience week is an annual symposium established to enable cross-disciplinary and role based discussions to advance strategies and research that engenders resilience in critical infrastructure systems and communities. Damaging storms, cyber attack and the interconnection of critical infrastructure systems can lead to cascading events that not only affect local but also across regions. However, many of these interdependencies are not easily recognized and obscure and complicate the mitigation of risk. The purpose of the symposia series is hence to facilitate best practice in managing critical infrastructure risks, by bringing together businesses, government and researchers. == Background == Originally organized in 2008 as a focus on the new research area of resilient control systems, including the disciplinary areas of control system, cyber-security, cognitive psychology and any number of critical infrastructure domains. Resilience has long been recognized as an area that requires not only the contributions of multiple disciplines or multidisciplinary participation, but interdisciplinary interaction where there is a common language and familiarity of the contributors to what other disciplines (and roles) contribute. The resulting interactions developed by Resilience Week and associated activities are intended to culture this sharing environment as a safe zone for inclusion; more importantly, an environment that lends to developing the new science and practice. As the attributes of resilience are complex, the contributions and topics for the event have included both the disciplinary and the project considerations, in keynotes, panels and research presentations. Keynotes have included senior leadership in the Department of Energy, Department of Defense, Department of Homeland Security, the National Science Foundation, and other agencies in addition to National Academy and professional organization fellows and senior industry leaders. Project panels and research presentations include emergent topics in resilience to climate change, cyber attack, damaging storms and the energy assurance. Topics Areas of focus have included: Control Systems Cyber Systems Cognitive Systems Communications Systems Communities and Infrastructure Project Focus Areas have included: Dependencies and Interdependencies Cyber Resilience for Operating Technology Commercializing Research and Development Building Critical Infrastructure Resilience through Distributed Energy Resources Energy Equity and Community Resilience Proceedings are developed for each year of the event, documenting the diversity of the research and engagements within these topical areas. == Impacts for the future == Since its inception, the Resilience Week community has evolved from one that primarily included only university researchers to one that includes many government laboratories, universities and private industries in the US and internationally. This type of collaboration forms a feedback loop that informs the research with the current needs and hones best practices. The future of the event is to further advance discussions that advance investment, recognize priorities and expedite technologies and tools to proactively address our energy future, in light of the natural and manmade challenges, and rationalizing the complex relationships that exist in critical infrastructure.
Read more →
Fillrate

In computer graphics, a video card's pixel fillrate refers to the number of pixels that can be rendered on the screen and written to video memory in one second. Pixel fillrates are given in megapixels per second or in gigapixels per second (in the case of newer cards), and are obtained by multiplying the number of render output units (ROPs) by the clock frequency of the graphics processing unit (GPU) of a video card. A similar concept, texture fillrate, refers to the number of texture map elements (texels) the GPU can map to pixels in one second. Texture fillrate is obtained by multiplying the number of texture mapping units (TMUs) by the clock frequency of the GPU. Texture fillrates are given in mega or gigatexels per second. However, there is no full agreement on how to calculate and report fillrates. Another possible method is to multiply the number of pixel pipelines by the GPU's clock frequency. The results of these multiplications correspond to a theoretical number. The actual fillrate depends on many other factors. In the past, the fillrate has been used as an indicator of performance by video card manufacturers such as ATI and NVIDIA, however, the importance of the fillrate as a measurement of performance has declined as the bottleneck in graphics applications has shifted. For example, today, the number and speed of unified shader processing units has gained attention. Although fillrate doesn't provide a substantial bottleneck in games, it can still provide a bottleneck for certain parts of the game, for example applying a gaussian blur can be bottlenecked by fillrate. Scene complexity can be increased by overdrawing, which happens when an object is drawn to the frame buffer, and another object (such as a wall) is then drawn on top of it, covering it up. The time spent drawing the first object is thus wasted because it is not visible. When a sequence of scenes is extremely complex (many pixels have to be drawn for each scene), the frame rate for the sequence may drop. When designing graphics intensive applications, one can determine whether the application is fillrate-limited (or shader limited) by seeing if the frame rate increases dramatically when the application runs at a lower resolution or in a smaller window. Although this is not a full-proof method, modern videogame engines can dynamically reduce the level-of-detail required and thereby reducing fillrate-limited applications. The best way to find fillrate bottlenecks is to use GPU vendor software like NVIDIA Nsight Graphics, AMD Radeon GPU Profile and the Intel Graphics Performance Analyzers.
Read more →
Thermal attack

A thermal attack (aka thermal imaging attack) is an approach that exploits heat traces to uncover the entered credentials. These attacks rely on the phenomenon of heat transfer from one object to another. During authentication, heat transfers from the users' hands to the surface they are interacting with, leaving heat traces behind that can be analyzed using thermal cameras that operate in the far-infrared spectrum. These traces can be recovered and used to reconstruct the passwords. In some cases, the attack can be successful even 30 seconds after the user has authenticated. Thermal attacks can be performed after the victim had authenticated, alleviating the need for in-situ observation attacks (e.g., shoulder surfing attacks) that can be affected by hand occlusions. While smudge attacks can reveal the order of entries of graphical passwords, such as the Android Lock Patterns, thermal attacks can reveal the order of entries even in the case of PINs or alphanumeric passwords. The reason thermal attacks leak information about the order of entry is because keys and buttons that the user touches first lose heat over time, while recently touched ones maintain the heat signature for a longer time. This results in distinguishable heat patterns that can tell the attacker which entry was entered first. Thermal attacks were shown to be effective against plastic keypads, such as the ones used to enter credit card's PINs in supermarkets and restaurants, and on handheld mobile devices such as smartphones and tablets. In their paper published at the Conference on Human Factors in Computing Systems (CHI 2017), Abdelrahman et al. showed that the attack is feasible on today's smartphones. They also proposed some ways to mitigate the attack, such as swiping randomly on the screen to distort the heat traces, or forcing maximum CPU usage for a few seconds. Thermal attacks can also infer passwords from heat traces on keyboards. Researchers at the University of Glasgow showed that attackers who use AI methods can be more effective in performing thermal attacks. Their study presents a new tool called ThermoSecure and evaluates it in two user studies. The results show that ThermoSecure can successfully attack passwords with an average accuracy of 92% to 55%, depending on the length of the password. The effectiveness of thermal attacks also depends on typing behavior and the material of the keycaps. ABS keycaps, which retain heat traces longer, are more vulnerable to thermal attacks. The study also discusses ways to protect against thermal attacks and presents seven potential mitigation approaches. Dr Khamis, who led the development of the technology with Norah Alotaibi and John Williamson, said with thermal imaging cameras more affordable than ever and machine learning becoming more accessible, it was "very likely that people around the world are developing systems along similar lines to ThermoSecure in order to steal passwords". == Thermal Attack Mitigation == === Simple and Practical Measures === One basic and effective way to mitigate thermal attacks is to deliberately create heat noise over the input interface, such as a keypad or keyboard, after entering a password. For instance, placing one's palm over the entire interface for a few seconds after use can obscure the thermal pattern left by the fingers, making it much more difficult for an unauthorized user to interpret the heat traces. === Range of Proposed Strategies === In addition to simple methods, researchers have developed a spectrum of mitigation strategies to counter thermal attacks. These strategies encompass 15 different approaches including: Use of Biometrics: Replacing traditional pin codes or passwords with biometric authentication, such as fingerprint recognition or facial recognition, eliminates the issue of residual heat on keypads. Heating the Interface: Implementing technology to slightly warm up the keypad can effectively neutralize the heat traces left by fingers, preventing thermal cameras from capturing the pattern. Randomizing Key Layouts: Employing dynamic key layouts that change positions every time the interface is used, making it impossible to correlate heat patterns with static input positions. === Technological Intervention on Thermal Cameras === Another avenue for mitigation is to address the issue at the source by modifying thermal cameras. Proposals have been made to develop thermal cameras that can automatically detect vulnerable interfaces such as keyboards or keypads. When these interfaces are detected within the camera's field of view, the camera would be programmed to prevent the user from recording images of them. This solution, however, would require widespread adoption by thermal camera manufacturers. Additionally, the approach is particularly viable for thermal cameras connected to a computing device, such as a smartphone, which can process the images in real time. Many affordable thermal cameras are standalone and do not have connectivity or processing capabilities. However, thermal cameras designed for connection to mobile devices can utilize the smartphone's processing power, making this mitigation approach feasible for such devices.
Read more →
ArcSoft ShowBiz

ShowBiz is a video editor by ArcSoft for the Windows operating system. It can create VCD and DVDs and can also export to the formats AVI, MPEG, WMV, and MOV. ShowBiz also contains a DVD burning and menu building feature. As of 2003, it was one of the three most dominant bundled titles. == Reception == PC Magazine reviewer Jan Ozer states: "ArcSoft's ShowBiz has evolved into a competent editor that's generally more usable than Dazzle's MovieStar program, providing more configuration controls, better preview features, and a much greater range of fun effects." John Virata, senior editor of Digital Media Online, says in his three page review of ShowBiz DVD 2, "It is an easy editor to work with and has a logically laid out interface that takes you step by step through the video creation and DVD creation process"
Read more →
Fragment (computer graphics)

In computer graphics, a fragment is the data necessary to generate a single pixel's worth of a drawing primitive in the frame buffer. These data may include, but are not limited to: raster position depth interpolated attributes (color, texture coordinates, etc.) stencil alpha window ID As a scene is drawn, drawing primitives (the basic elements of graphics output, such as points, lines, circles, text etc.) are rasterized into fragments which are textured and combined with the existing frame buffer. How a fragment is combined with the data already in the frame buffer depends on various settings. In a typical case, a fragment may be discarded if it is further away than the pixel which is already at that location (according to the depth buffer). If it is nearer than the existing pixel, it may replace what is already there, or, if alpha blending is in use, the pixel's color may be replaced with a mixture of the fragment's color and the pixel's existing color, as in the case of drawing a translucent object. In general, a fragment can be thought of as the data needed to shade the pixel, plus the data needed to test whether the fragment survives to become a pixel (depth, alpha, stencil, scissor, window ID, etc.). Shading a fragment is done through a fragment shader (or pixel shaders in Direct3D). In computer graphics, a fragment is not necessarily opaque, and could contain an alpha value specifying its degree of transparency. The alpha is typically normalized to the range of [0, 1], with 0 denotes totally transparent and 1 denotes totally opaque. If the fragment is not totally opaque, then part of its background object could show through, which is known as alpha blending.
Read more →
Film recorder

A film recorder is a graphical output device for transferring images to photographic film from a digital source. In a typical film recorder, an image is passed from a host computer to a mechanism to expose film through a variety of methods, historically by direct photography of a high-resolution cathode-ray tube (CRT) display. The exposed film can then be developed using conventional developing techniques, and displayed with a slide or motion picture projector. The use of film recorders predates the current use of digital projectors, which eliminate the time and cost involved in the intermediate step of transferring computer images to film stock, instead directly displaying the image signal from a computer. Motion picture film scanners are the opposite of film recorders, copying content from film stock to a computer system. Film recorders can be thought of as modern versions of kinescopes. == Design == === Operation === All film recorders typically work in the same manner. The image is fed from a host computer as a raster stream over a digital interface. A film recorder exposes film through various mechanisms; flying spot (early recorders); photographing a high resolution video monitor; electron beam recorder (Sony HDVS); a CRT scanning dot (Celco); focused beam of light from a light valve technology (LVT) recorder; a scanning laser beam (Arrilaser); or recently, full-frame LCD array chips. For color image recording on a CRT film recorder, the red, green, and blue channels are sequentially displayed on a single gray scale CRT, and exposed to the same piece of film as a multiple exposure through a filter of the appropriate color. This approach yields better resolution and color quality than possible with a tri-phosphor color CRT. The three filters are usually mounted on a motor-driven wheel. The filter wheel, as well as the camera's shutter, aperture, and film motion mechanism are usually controlled by the recorder's electronics and/or the driving software. CRT film recorders are further divided into analog and digital types. The analog film recorder uses the native video signal from the computer, while the digital type uses a separate display board in the computer to produce a digital signal for a display in the recorder. Digital CRT recorders provide a higher resolution at a higher cost compared to analog recorders due to the additional specialized hardware. Typical resolutions for digital recorders were quoted as 2K and 4K, referring to 2048×1366 and 4096×2732 pixels, respectively, while analog recorders provided a resolution of 640×428 pixels in comparison. Higher-quality LVT film recorders use a focused beam of light to write the image directly onto a film loaded spinning drum, one pixel at a time. In one example, the light valve was a liquid-crystal shutter, the light beam was steered with a lens, and text was printed using a pre-cut optical mask. The LVT will record pixel beyond grain. Some machines can burn 120-res or 120 lines per millimeter. The LVT is basically a reverse drum scanner. The exposed film is developed and printed by regular photographic chemical processing. === Formats === Film recorders are available for a variety of film types and formats. The 35 mm negative film and transparencies are popular because they can be processed by any photo shop. Single-image 4×5 film and 8×10 are often used for high-quality, large format printing. Some models have detachable film holders to handle multiple formats with the same camera or with Polaroid backs to provide on-site review of output before exposing film. == Uses == Film recorders are used in digital printing to generate master negatives for offset and other bulk printing processes. For preview, archiving, and small-volume reproduction, film recorders have been rendered obsolete by modern printers that produce photographic-quality hardcopies directly on plain paper. They are also used to produce the master copies of movies that use computer animation or other special effects based on digital image processing. However, most cinemas nowadays use Digital Cinema Packages on hard drives instead of film stock. === Computer graphics === Film recorders were among the earliest computer graphics output devices; for example, the IBM 740 CRT Recorder was announced in 1954. Film recorders were also commonly used to produce slides for slide projectors; but this need is now largely met by video projectors that project images directly from a computer to a screen. The terms "slide" and "slide deck" are still commonly used in presentation programs. === Current uses === Currently, film recorders are primarily used in the motion picture film-out process for the ever increasing amount of digital intermediate work being done. Although significant advances in large venue video projection alleviates the need to output to film, there remains a deadlock between the motion picture studios and theater owners over who should pay for the cost of these very costly projection systems. This, combined with the increase in international and independent film production, will keep the demand for film recording steady for at least a decade. == Key manufacturers == Traditional film recorder manufacturers have all but vanished from the scene or have evolved their product lines to cater to the motion picture industry. Dicomed was one such early provider of digital color film recorders. Polaroid, Management Graphics, Inc, MacDonald-Detwiler, Information International, Inc., and Agfa were other producers of film recorders. Arri is the only current major manufacturer of film recorders. Kodak Lightning I film recorder. One of the first laser recorders. Needed an engineering staff to set up. Kodak Lightning II film recorder used both gas and diode laser to record on to film. The last LVT machines produced by Kodak / Durst-Dice stopped production in 2002. There are no LVT film recorders currently being produced. LVT Saturn 1010 uses a LED exposure (RGB) to 8"x10" film at 1000-3000ppi. LUX Laser Cinema Recorder from Autologic/Information International in Thousand Oaks, California. Sales end in March 2000. Used on the 1997 film “Titanic”. Arri produces the Arrilaser line of laser-based motion picture film recorders. MGI produced the Solitaire line of CRT-based motion picture film recorders. Matrix, originally ImaPRO, a branch of Agfa Division, produced the QCR line of CRT-based motion picture film recorders. CCG, formerly Agfa film recorders, has been a steady manufacturer of film recorders based in Germany. In 2004 CCG introduced Definity, a motion picture film recorder utilizing LCD technology. In 2010 CCG introduced the first full LED LCD film recorder as a new step in film recording. Cinevator was made by Cinevation AS, in Drammen, Norway. The Cinevator was a real-time digital film recorder. It could record IN, IP and prints with and without sound Oxberry produced the Model 3100 film recorder camera system, with interchangeable pin-registered movements (shuttles) for 35 mm (full frame/Silent, 1.33:1) and 16 mm (regular 16, "2R"), and others have adapted the Oxberry movements for CinemaScope, 1.85:1, 1.75:1, 1.66:1, as well as Academy/Sound (1.37:1) in 35 mm and Super-16 in 16 mm ("1R"). For instance, the "Solitaire" and numerous others employed the Oxberry 3100 camera system. == History == Before video tape recorders or VTRs were invented, TV shows were either broadcast live or recorded to film for later showing, using the kinescope process. In 1967, CBS Laboratories introduced the Electronic Video Recording format, which used video and telecined-to-video film sources, which were then recorded with an electron-beam recorder at CBS' EVR mastering plant at the time to 35mm film stock in a rank of 4 strips on the film, which was then slit down to 4 8.75 mm (0.344 in) film copies, for playback in an EVR player. All types of CRT recorders were (and still are) used for film recording. Some early examples used for computer-output recording were the 1954 IBM 740 CRT Recorder, and the 1962 Stromberg-Carlson SC-4020, the latter using a Charactron CRT for text and vector graphic output to either 16 mm motion picture film, 16 mm microfilm, or hard-copy paper output. Later 1970 and 80s-era recording to B&W (and color, with 3 separate exposures for red, green, and blue)) 16 mm film was done with an EBR (Electron Beam Recorder), the most prominent examples made by 3M), for both video and COM (Computer Output Microfilm) applications. Image Transform in Universal City, California used specially modified 3M EBR film recorders that could perform color film-out recording on 16 mm by exposing three 16 mm frames in a row (one red, one green and one blue). The film was then printed to color 16 mm or 35 mm film. The video fed to the recorder could either be NTSC, PAL or SECAM. Later, Image Transform used specially modified VTRs to record 24 frame for their "Image Vision" system. The modified 1 inch type B videotape VTRs would record
Read more →
Sprite (computer graphics)

In computer graphics, a sprite is a two-dimensional bitmap that is integrated into a larger scene, most often in a 2D video game. Originally, the term sprite referred to fixed-sized objects composited together, by hardware, with a background. Use of the term has since become more general. Systems with hardware sprites include arcade video games of the 1970s and 1980s; game consoles including as the Atari VCS (1977), ColecoVision (1982), Famicom (1983), Genesis/Mega Drive (1988); and home computers such as the TI-99/4 (1979), Atari 8-bit computers (1979), Commodore 64 (1982), MSX (1983), Amiga (1985), and X68000 (1987). Hardware varies in the number of sprites supported, the size and colors of each sprite, and special effects such as scaling or reporting pixel-precise overlap. Hardware composition of sprites occurs as each scan line is prepared for the video output device, such as a cathode-ray tube, without involvement of the main CPU and without the need for a full-screen frame buffer. Sprites can be positioned or altered by setting attributes used during the hardware composition process. The number of sprites which can be displayed per scan line is often lower than the total number of sprites a system supports. For example, the Texas Instruments TMS9918 chip supports 32 sprites, but only four can appear on the same scan line. The CPUs in modern computers, video game consoles, and mobile devices are fast enough that bitmaps can be drawn into a frame buffer without special hardware assistance. Beyond that, GPUs can render vast numbers of scaled, rotated, anti-aliased, partially translucent, very high resolution images in parallel with the CPU. == Etymology == According to Karl Guttag, one of two engineers for the 1979 Texas Instruments TMS9918 video display processor, this use of the word sprite came from David Ackley, a manager at TI. It was also used by Danny Hillis at Texas Instruments in the late 1970s. The term was derived from the fact that sprites "float" on top of the background image without overwriting it, much like a ghost or mythological sprite. Some hardware manufacturers used different terms, especially before sprite became common: Player/Missile Graphics was a term used by Atari, Inc. for hardware sprites in the Atari 8-bit computers (1979) and Atari 5200 console (1982). The term reflects the use for both characters ("players") and smaller associated objects ("missiles") that share the same color. The earlier Atari Video Computer System and some Atari arcade games used player, missile, and ball. Stamp was used in some arcade hardware in the early 1980s, including Ms. Pac-Man. Movable Object Block, or MOB, was used in MOS Technology's graphics chip literature. Commodore, the main user of MOS chips and the owner of MOS for most of the chip maker's lifetime, instead used the term sprite for the Commodore 64. OBJs (short for objects) is used in the developer manuals for the NES, Super NES, and Game Boy. The region of video RAM used to store sprite attributes and coordinates is called OAM (Object Attribute Memory). This also applies to the Game Boy Advance and Nintendo DS. == History == === Arcade video games === The use of sprites originated with arcade video games. Nolan Bushnell came up with the original concept when he developed the first arcade video game, Computer Space (1971). Technical limitations made it difficult to adapt the early mainframe game Spacewar! (1962), which performed an entire screen refresh for every little movement, so he came up with a solution to the problem: controlling each individual game element with a dedicated transistor. The rockets were essentially hardwired bitmaps that moved around the screen independently of the background, an important innovation for producing screen images more efficiently and providing the basis for sprite graphics. The earliest video games to represent player characters as human player sprites were arcade sports video games, beginning with Taito's TV Basketball, released in April 1974 and licensed to Midway Manufacturing for release in North America. Designed by Tomohiro Nishikado, he wanted to move beyond simple Pong-style rectangles to character graphics, by rearranging the rectangle shapes into objects that look like basketball players and basketball hoops. Ramtek released another sports video game in October 1974, Baseball, which similarly displayed human-like characters. The Namco Galaxian arcade system board, for the 1979 arcade game Galaxian, displays animated, multi-colored sprites over a scrolling background. It became the basis for Nintendo's Radar Scope and Donkey Kong arcade hardware and home consoles such as the Nintendo Entertainment System. According to Steve Golson from General Computer Corporation, the term "stamp" was used instead of "sprite" at the time. === Home systems === Signetics devised the first chips capable of generating sprite graphics (referred to as objects by Signetics) for home systems. The Signetics 2636 video processors were first used in the 1978 1292 Advanced Programmable Video System and later in the 1979 Elektor TV Games Computer. The Atari VCS, released in 1977, has a hardware sprite implementation where five graphical objects can be moved independently of the game playfield. The term sprite was not in use at the time. The VCS's sprites are called movable objects in the programming manual, further identified as two players, two missiles, and one ball. These each consist of a single row of pixels that are displayed on a scan line. To produce a two-dimensional shape, the sprite's single-row bitmap is altered by software from one scan line to the next. The 1979 Atari 400 and 800 home computers have similar, but more elaborate, circuitry capable of moving eight single-color objects per scan line: four 8-bit wide players and four 2-bit wide missiles. Each is the full height of the display—a long, thin strip. DMA from a table in memory automatically sets the graphics pattern registers for each scan line. Hardware registers control the horizontal position of each player and missile. Vertical motion is achieved by moving the bitmap data within a player or missile's strip. The feature was called player/missile graphics by Atari. Texas Instruments developed the TMS9918 chip with sprite support for its 1979 TI-99/4 home computer. An updated version is used in the 1981 TI-99/4A. === In 2.5D and 3D games === Sprites remained popular with the rise of 2.5D games (those which recreate a 3D game space from a 2D map) in the late 1980s and early 1990s. A technique called billboarding allows 2.5D games to keep onscreen sprites rotated toward the player view at all times. Some 2.5D games, such as 1993's Doom, allow the same entity to be represented by different sprites depending on its rotation relative to the viewer, furthering the illusion of 3D. Fully 3D games usually present world objects as 3D models, but sprites are supported in some 3D game engines, such as GoldSrc and Unreal, and may be billboarded or locked to fixed orientations. Sprites remain useful for small details, particle effects, and other applications where the lack of a third dimension is not a major detriment. == Systems with hardware sprites == These are base hardware specs and do not include additional programming techniques, such as using raster interrupts to repurpose sprites mid-frame.
Read more →
Limnu

Limnu was an online whiteboarding app founded in 2015 by David DeBry and David Hart. It allowed users to draw on virtual whiteboards and invite others by e-mail or by sharing a link. Invitees see any changes to the board in real time and, if allowed by the owner of the board, can also draw on the board. The service was accessible through a web application in desktop and mobile web browsers, as well as through an iOS application. It was headquartered in San Mateo, California. == History == In 2018, ZipSocket, a maker of online meeting software acquired Limnu. == Staff Directory == Andrew Kunz - CEO & Founder of ZipSocket Jenny Rice - Product Manager Max Requenes - Software Engineer Henry Maguire - Machine Learning Engineer
Read more →
Data commingling

Data commingling, in computer science, occurs when different items or kinds of data are stored in such a way that they become commonly accessible when they are supposed to remain separated. In cloud computing, this can occur where different customer data sits on the same server. Data that is commingled can present a security vulnerability. Data commingling can also occur due to high speed data transmission mixing. In this situation, data of one security level can inadvertently or purposely be mixed with data of a lower or higher security level on the same transmission portal. Portal vehicles can be wire, fiber optics, microwave or various radio frequency transmission portals. This commingling can cause breaches of security and become a source of legal issues to any entity, corporation or individual. Data commingling can also occur when personal computers and personal software programs are used for business, security, government, etc. uses. In the early formulation stages of entities, non-profit or profit corporations, LLC's, LLP's, etc., the creation and use of stand-alone computers and stand-alone networks, "absolutely unconnected" to involved individuals, is the easiest, and safest way to prevent Data Commingling.
Read more →
Big data

Big data primarily refers to data sets that are too large or complex to be dealt with by traditional data-processing software. Data with many entries (rows) offers greater statistical power, while data with higher complexity (more attributes or columns) may lead to a higher false discovery rate. Big data analysis challenges include capturing data, data storage, data analysis, search, sharing, transfer, visualization, querying, updating, information privacy, and data sources. Big data was originally associated with three key concepts: volume, variety, and velocity. The analysis of big data that have only volume, velocity, and variety can pose challenges in sampling. A fourth concept, veracity, which refers to the level of reliability of data, was thus added. Without sufficient investment in expertise to ensure big data veracity, the volume and variety of data can produce costs and risks that exceed an organization's capacity to create and capture value from big data. Current usage of the term big data tends to refer to the use of predictive analytics, user behavior analytics, or certain other advanced data analytics methods that extract value from big data, and seldom to a particular size of data set. "There is little doubt that the quantities of data now available are indeed large, but that's not the most relevant characteristic of this new data ecosystem." Analysis of data sets can find new correlations to "spot business trends, prevent diseases, combat crime and so on". Scientists, business executives, medical practitioners, advertising and governments alike regularly meet difficulties with large datasets in areas including Internet searches, fintech, healthcare analytics, geographic information systems, urban informatics, and business informatics. Scientists encounter limitations in e-Science work, including meteorology, genomics, connectomics, complex physics simulations, biology, and environmental research. The size and number of available data sets have grown rapidly as data is collected by devices such as mobile devices, cheap and numerous information-sensing Internet of things devices, aerial (remote sensing) equipment, software logs, cameras, microphones, radio-frequency identification (RFID) readers and wireless sensor networks. The world's technological per-capita capacity to store information has roughly doubled every 40 months since the 1980s; as of 2012, every day 2.5 exabytes (2.17×260 bytes) of data are generated. Based on an IDC report prediction, the global data volume was predicted to grow exponentially from 4.4 zettabytes to 44 zettabytes between 2013 and 2020. By 2025, IDC predicts there will be 163 zettabytes of data. According to IDC, global spending on big data and business analytics (BDA) solutions is estimated to reach $215.7 billion in 2021. Statista reported that the global big data market is forecasted to grow to $103 billion by 2027. In 2011 McKinsey & Company reported, if US healthcare were to use big data creatively and effectively to drive efficiency and quality, the sector could create more than $300 billion in value every year. In the developed economies of Europe, government administrators could save more than €100 billion ($149 billion) in operational efficiency improvements alone by using big data. And users of services enabled by personal-location data could capture $600 billion in consumer surplus. One question for large enterprises is determining who should own big-data initiatives that affect the entire organization. Relational database management systems and desktop statistical software packages used to visualize data often have difficulty processing and analyzing big data. The processing and analysis of big data may require "massively parallel software running on tens, hundreds, or even thousands of servers". What qualifies as "big data" varies depending on the capabilities of those analyzing it and their tools. Furthermore, expanding capabilities make big data a moving target. "For some organizations, facing hundreds of gigabytes of data for the first time may trigger a need to reconsider data management options. For others, it may take tens or hundreds of terabytes before data size becomes a significant consideration." == Definition == The term big data has been in use since the 1990s, with some giving credit to John Mashey for popularizing the term. Big data usually includes data sets with sizes beyond the ability of commonly used software tools to capture, curate, manage, and process data within a tolerable elapsed time. Big data philosophy encompasses unstructured, semi-structured and structured data; however, the main focus is on unstructured data. Big data "size" is a constantly moving target; as of 2012 ranging from a few dozen terabytes to many zettabytes of data. Big data requires a set of techniques and technologies with new forms of integration to reveal insights from datasets that are diverse, complex, and of a massive scale. Variability is often included as an additional quality of big data. A 2018 definition states "Big data is where parallel computing tools are needed to handle data", and notes, "This represents a distinct and clearly defined change in the computer science used, via parallel programming theories, and losses of some of the guarantees and capabilities made by Codd's relational model." In a comparative study of big datasets, Kitchin and McArdle found that none of the commonly considered characteristics of big data appear consistently across all of the analyzed cases. For this reason, other studies identified the redefinition of power dynamics in knowledge discovery as the defining trait. Instead of focusing on the intrinsic characteristics of big data, this alternative perspective pushes forward a relational understanding of the object claiming that what matters is the way in which data is collected, stored, made available and analyzed. === Big data vs. business intelligence === The growing maturity of the concept more starkly delineates the difference between "big data" and "business intelligence": Business intelligence uses applied mathematics tools and descriptive statistics with data with high information density to measure things, detect trends, etc. Big data uses mathematical analysis, optimization, inductive statistics, and concepts from nonlinear system identification to infer laws (regressions, nonlinear relationships, and causal effects) from large sets of data with low information density to reveal relationships and dependencies, or to perform predictions of outcomes and behaviors. == Characteristics == Big data can be described by the following characteristics: Volume The quantity of generated and stored data. The size of the data determines the value and potential insight, and whether it can be considered big data or not. The size of big data is usually larger than terabytes and petabytes. Variety The type and nature of the data. Earlier technologies like RDBMSs were capable to handle structured data efficiently and effectively. However, the change in type and nature from structured to semi-structured or unstructured challenged the existing tools and technologies. Big data technologies evolved with the prime intention to capture, store, and process the semi-structured and unstructured (variety) data generated with high speed (velocity), and huge in size (volume). Later, these tools and technologies were explored and used for handling structured data also but preferable for storage. Eventually, the processing of structured data was still kept as optional, either using big data or traditional RDBMSs. This helps in analyzing data towards effective usage of the hidden insights exposed from the data collected via social media, log files, sensors, etc. Big data draws from text, images, audio, video; plus it completes missing pieces through data fusion. Velocity The speed at which the data is generated and processed to meet the demands and challenges that lie in the path of growth and development. Big data is often available in real-time. Compared to small data, big data is produced more continually. Two kinds of velocity related to big data are the frequency of generation and the frequency of handling, recording, and publishing. Veracity The truthfulness or reliability of the data, which refers to the data quality and the data value. Big data must not only be large in size, but also must be reliable in order to achieve value in the analysis of it. The data quality of captured data can vary greatly, affecting an accurate analysis. Value The worth in information that can be achieved by the processing and analysis of large datasets. Value also can be measured by an assessment of the other qualities of big data. Value may also represent the profitability of information that is retrieved from the analysis of big data. Variability The characteristic of the changing formats, structure, or sources of big data. Big data can include structured, unstructured,
Read more →