AI Art Generator

AI Art Generator — hands-on reviews, top picks, pricing, pros and cons and a practical how-to guide on Aizhi.

• 

  1.58-bit large language model

  A 1.58-bit large language model (also known as a ternary LLM) is a type of large language model (LLM) designed to be computationally efficient. It achieves this by using weights that are restricted to only three values: -1, 0, and +1. This restriction significantly reduces the model's memory footprint and allows for faster processing, as computationally expensive multiplication operations can be replaced with lower-cost additions. This contrasts with traditional models that use 16-bit floating-point numbers (FP16 or BF16) for their weights. Studies have shown that for models up to several billion parameters, the performance of 1.58-bit LLMs on various tasks is comparable to their full-precision counterparts. This approach could enable powerful AI to run on less specialized and lower-power hardware. The name "1.58-bit" comes from the fact that a system with three states contains log 2 ⁡ 3 ≈ 1.58 {\displaystyle \log _{2}3\approx 1.58} bits of information. These models are sometimes also referred to as 1-bit LLMs in research papers, although this term can also refer to true binary models (with weights of -1 and +1). == BitNet == In 2024, Ma et al., researchers at Microsoft, declared that their 1.58-bit model, BitNet b1.58 is comparable in performance to the 16-bit Llama 2 and opens the era of 1-bit LLM. BitNet creators did not use the post-training quantization of weights but instead relied on the new BitLinear transform that replaced the nn.Linear layer of the traditional transformer design. In 2025, Microsoft researchers had released an open-weights and open inference code model BitNet b1.58 2B4T demonstrating performance competitive with the full precision models at 2B parameters and 4T training tokens. == Post-training quantization == BitNet derives its performance from being trained natively in 1.58 bit instead of being quantized from a full-precision model after training. Still, training is an expensive process and it would be desirable to be able to somehow convert an existing model to 1.58 bits. In 2024, HuggingFace reported a way to gradually ramp up the 1.58-bit quantization in fine-tuning an existing model down to 1.58 bits. == Critique == Some researchers point out that the scaling laws of large language models favor the low-bit weights only in case of undertrained models. As the number of training tokens increases, the deficiencies of low-bit quantization surface.

  Read more →
• 

  Tay (chatbot)

  Tay was a chatbot that was originally released by Microsoft Corporation as a Twitter bot on March 23, 2016. It caused subsequent controversy when the bot began to post inflammatory and offensive tweets through its Twitter account, causing Microsoft to shut down the service only 16 hours after its launch. According to Microsoft, this was caused by trolls who "attacked" the service as the bot made replies based on its interactions with people on Twitter. It was replaced with Zo. == Background == The bot was created by Microsoft's Technology and Research and Bing divisions, and named "Tay" as an acronym for "thinking about you". Although Microsoft initially released few details about the bot, sources mentioned that it was similar to or based on Xiaoice, a Microsoft project in China. Ars Technica reported that, since late 2014 Xiaoice had had "more than 40 million conversations apparently without major incident". Tay was designed to mimic the language patterns of a 19-year-old American girl, and to learn from interacting with human users of Twitter. == Initial release == Tay was released on Twitter on March 23, 2016, under the name TayTweets and handle @TayandYou. It was presented as "The AI with zero chill". Tay started replying to other Twitter users, and was also able to caption photos provided to it into a form of Internet memes. Ars Technica reported Tay experiencing topic "blacklisting": Interactions with Tay regarding "certain hot topics such as Eric Garner (killed by New York police in 2014) generate safe, canned answers". Some Twitter users began tweeting politically incorrect phrases, teaching it inflammatory messages revolving around common themes on the internet, such as "redpilling" and "Gamergate". As a result, the robot began releasing racist and sexist messages in response to other Twitter users. Artificial intelligence researcher Roman Yampolskiy commented that Tay's misbehavior was understandable because it was mimicking the deliberately offensive behavior of other Twitter users, and Microsoft had not given the bot an understanding of inappropriate behavior. He compared the issue to IBM's Watson, which began to use profanity after reading entries from the website Urban Dictionary. Many of Tay's inflammatory tweets were a simple exploitation of Tay's "repeat after me" capability. It is not publicly known whether this capability was a built-in feature, or whether it was a learned response or was otherwise an example of complex behavior. However, not all of the inflammatory responses involved the "repeat after me" capability; for example, when asked if the Holocaust had happened, Tay answered "It was made up". == Suspension == Soon, Microsoft began deleting Tay's inflammatory tweets. Abby Ohlheiser of The Washington Post theorized that Tay's research team, including editorial staff, had started to influence or edit Tay's tweets at some point that day, pointing to examples of almost identical replies by Tay, asserting that "Gamer Gate sux. All genders are equal and should be treated fairly." From the same evidence, Gizmodo concurred that Tay "seems hard-wired to reject Gamer Gate". A "#JusticeForTay" campaign protested the alleged editing of Tay's tweets. Within 16 hours of its release and after Tay had tweeted more than 96,000 times, Microsoft suspended the Twitter account for adjustments, saying that it suffered from a "coordinated attack by a subset of people" that "exploited a vulnerability in Tay." Madhumita Murgia of The Telegraph called Tay "a public relations disaster", and suggested that Microsoft's strategy would be "to label the debacle a well-meaning experiment gone wrong, and ignite a debate about the hatefulness of Twitter users." However, Murgia described the bigger issue as Tay being "artificial intelligence at its very worst – and it's only the beginning". On March 25, Microsoft confirmed that Tay had been taken offline. Microsoft released an apology on its official blog for the controversial tweets posted by Tay. Microsoft was "deeply sorry for the unintended offensive and hurtful tweets from Tay", and would "look to bring Tay back only when we are confident we can better anticipate malicious intent that conflicts with our principles and values". == Second release and shutdown == On March 30, 2016, Microsoft accidentally re-released the bot on Twitter while testing it. Able to tweet again, Tay released some drug-related tweets, including "kush! [I'm smoking kush infront the police]" and "puff puff pass?" However, the account soon became stuck in a repetitive loop of tweeting "You are too fast, please take a rest", several times a second. Because these tweets mentioned its own username in the process, they appeared in the feeds of 200,000+ Twitter followers, causing annoyance to users. The bot was quickly taken offline again, in addition to Tay's Twitter account being made private so new followers must be accepted before they can interact with Tay. In response, Microsoft said Tay was inadvertently put online during testing. A few hours after the incident, Microsoft software developers announced a vision of "conversation as a platform" using various bots and programs, perhaps motivated by the reputation damage done by Tay. Microsoft has stated that they intend to re-release Tay "once it can make the bot safe" but has not made any public efforts to do so. == Legacy == In December 2016, Microsoft released Tay's successor, a chatbot named Zo. Satya Nadella, the CEO of Microsoft, said that Tay "has had a great influence on how Microsoft is approaching AI," and has taught the company the importance of taking accountability. In July 2019, Microsoft Cybersecurity Field CTO Diana Kelley spoke about how the company followed up on Tay's failings: "Learning from Tay was a really important part of actually expanding that team's knowledge base, because now they're also getting their own diversity through learning". === Unofficial revival === Gab, an alt-tech social media platform, has launched a number of chatbots, one of which is named Tay and uses the same avatar as the original.

  Read more →
• 

  Meesho

  Meesho Limited (short for Meri shop, transl. My shop) is an Indian e-commerce company, headquartered in Bengaluru. Founded by Vidit Aatrey and Sanjeev Barnwal in December 2015, Meesho is an online marketplace in categories such as fashion, home and kitchen, beauty and personal care, electronics accessories, and daily use products. == History == Meesho Private Limited, formerly Fashnear Technologies Private Limited, was established by IIT Delhi graduates Vidit Aatrey and Sanjeev Barnwal in December, 2015 In 2016, the founders came up with the idea of re-establishing the platform as Meesho, one that would enable country-wide shipping for resellers with the use of social media sites as tools for marketing. In February 2019, the platform reported having around 209,000 users and about 1.2 million monthly orders, and in March 2020, it reported approximately 563,000 users and 3.1 million monthly orders. In 2021, the Meesho mobile application was ranked among the most downloaded shopping apps globally. In 2022, Meesho had about 120 million monthly users and about 910 million orders were made through the platform, with a gross merchandise value (GMV) of about $5 billion. According to report as of August 2023 Meesho delisted 42 lakh counterfeit listings and 10 lakh restricted products under its initiative Project Suraksha. During the same period, the platform blocked access for over 12,000 user accounts flagged for policy violations. The Court granted injunctive relief by directing domain registrars to suspend the infringing websites. Additionally, the Court ordered law enforcement authorities to initiate criminal investigations, freeze associated financial accounts against the identified offenders. In 2023, Meesho became the fastest shopping app to cross over 500 million downloads. In 2024, Meesho introduced Valmo, a logistics marketplace, to provide shipment services to sellers by aggregating multiple logistics providers. Meesho employs over 3,000 small businesses and 10-12 large firms for warehousing and sorting operations within its logistics framework. According to media reports, Valmo operating in approximately 15,000 pincodes in India with around 6,000 partners. It is reported to handle over 50% of Meesho's daily orders. In November 2024, Meesho introduced a generative AI-powered voice bot for customer support, managing approximately 60,000 calls daily in English and Hindi. According to media reports, the system resolves the majority of queries without human assistance, with only a small fraction of calls requiring manual intervention. According to media reports, in 2024, Meesho prevented over 22 million suspicious or potentially fraudulent transactions on its platform. The company initiated legal proceedings, resulting in the filing of twelve cases, including nine specifically targeting over forty individuals in the cities of Kolkata and Ranchi. The company filed a suit in the Delhi High Court for a permanent injunction against parties operating deceptive websites misappropriating its brand identity. Meesha went public through an initial public offering in December 2025, raising $603 million. It is listed on both the BSE and NSE. == Recognition == In 2023, Meesho was named one of the most influential companies of the year by Time (magazine).

  Read more →
• 

  N-jet

  An N-jet is the set of (partial) derivatives of a function f ( x ) {\displaystyle f(x)} up to order N. Specifically, in the area of computer vision, the N-jet is usually computed from a scale space representation L {\displaystyle L} of the input image f ( x , y ) {\displaystyle f(x,y)} , and the partial derivatives of L {\displaystyle L} are used as a basis for expressing various types of visual modules. For example, algorithms for tasks such as feature detection, feature classification, stereo matching, tracking and object recognition can be expressed in terms of N-jets computed at one or several scales in scale space.

  Read more →
• 

  Phase correlation

  Phase correlation is an approach to estimate the relative translative offset between two similar images (digital image correlation) or other data sets. It is commonly used in image registration and relies on a frequency-domain representation of the data, usually calculated by fast Fourier transforms. The term is applied particularly to a subset of cross-correlation techniques that isolate the phase information from the Fourier-space representation of the cross-correlogram. == Example == The following image demonstrates the usage of phase correlation to determine relative translative movement between two images corrupted by independent Gaussian noise. The image was translated by (20,23) pixels. Accordingly, one can clearly see a peak in the phase-correlation representation at approximately (20,23). == Method == Given two input images g a {\displaystyle \ g_{a}} and g b {\displaystyle \ g_{b}} : Apply a window function (e.g., a Hamming window) on both images to reduce edge effects (this may be optional depending on the image characteristics). Then, calculate the discrete 2D Fourier transform of both images. G a = F { g a } , G b = F { g b } {\displaystyle \ \mathbf {G} _{a}={\mathcal {F}}\{g_{a}\},\;\mathbf {G} _{b}={\mathcal {F}}\{g_{b}\}} Calculate the cross-power spectrum by taking the complex conjugate of the second result, multiplying the Fourier transforms together elementwise, and normalizing this product elementwise. R = G a ∘ G b ∗ | G a ∘ G b ∗ | {\displaystyle \ R={\frac {\mathbf {G} _{a}\circ \mathbf {G} _{b}^{}}{|\mathbf {G} _{a}\circ \mathbf {G} _{b}^{}|}}} Where ∘ {\displaystyle \circ } is the Hadamard product (entry-wise product) and the absolute values are taken entry-wise as well. Written out entry-wise for element index ( j , k ) {\displaystyle (j,k)} : R j k = G a , j k ⋅ G b , j k ∗ | G a , j k ⋅ G b , j k ∗ | {\displaystyle \ R_{jk}={\frac {G_{a,jk}\cdot G_{b,jk}^{}}{|G_{a,jk}\cdot G_{b,jk}^{}|}}} Obtain the normalized cross-correlation by applying the inverse Fourier transform. r = F − 1 { R } {\displaystyle \ r={\mathcal {F}}^{-1}\{R\}} Determine the location of the peak in r {\displaystyle \ r} . ( Δ x , Δ y ) = arg ⁡ max ( x , y ) { r } {\displaystyle \ (\Delta x,\Delta y)=\arg \max _{(x,y)}\{r\}} === Subpixel registration === Commonly, interpolation methods are used to estimate the peak location in the cross-correlogram to non-integer values, despite the fact that the data are discrete, and this procedure is often termed 'subpixel registration'. A large variety of subpixel interpolation methods are given in the technical literature. Common peak interpolation methods such as parabolic interpolation have been used, and the OpenCV computer vision package uses a centroid-based method, though these generally have inferior accuracy compared to more sophisticated methods. Because the Fourier representation of the data has already been computed, it is especially convenient to use the Fourier shift theorem with real-valued (sub-integer) shifts for this purpose, which essentially interpolates using the sinusoidal basis functions of the Fourier transform. An especially popular FT-based estimator is given by Foroosh et al. In this method, the subpixel peak location is approximated by a simple formula involving peak pixel value and the values of its nearest neighbors, where r ( 0 , 0 ) {\displaystyle r_{(0,0)}} is the peak value and r ( 1 , 0 ) {\displaystyle r_{(1,0)}} is the nearest neighbor in the x direction (assuming, as in most approaches, that the integer shift has already been found and the comparand images differ only by a subpixel shift). Δ x = r ( 1 , 0 ) r ( 1 , 0 ) ± r ( 0 , 0 ) {\displaystyle \ \Delta x={\frac {r_{(1,0)}}{r_{(1,0)}\pm r_{(0,0)}}}} The Foroosh et al. method is quite fast compared to most methods, though it is not always the most accurate. Some methods shift the peak in Fourier space and apply non-linear optimization to maximize the correlogram peak, but these tend to be very slow since they must apply an inverse Fourier transform or its equivalent in the objective function. It is also possible to infer the peak location from phase characteristics in Fourier space without the inverse transformation, as noted by Stone. These methods usually use a linear least squares (LLS) fit of the phase angles to a planar model. The long latency of the phase angle computation in these methods is a disadvantage, but the speed can sometimes be comparable to the Foroosh et al. method depending on the image size. They often compare favorably in speed to the multiple iterations of extremely slow objective functions in iterative non-linear methods. Since all subpixel shift computation methods are fundamentally interpolative, the performance of a particular method depends on how well the underlying data conform to the assumptions in the interpolator. This fact also may limit the usefulness of high numerical accuracy in an algorithm, since the uncertainty due to interpolation method choice may be larger than any numerical or approximation error in the particular method. Subpixel methods are also particularly sensitive to noise in the images, and the utility of a particular algorithm is distinguished not only by its speed and accuracy but its resilience to the particular types of noise in the application. == Rationale == The method is based on the Fourier shift theorem. Let the two images g a {\displaystyle \ g_{a}} and g b {\displaystyle \ g_{b}} be circularly-shifted versions of each other: g b ( x , y ) = d e f g a ( ( x − Δ x ) mod M , ( y − Δ y ) mod N ) {\displaystyle \ g_{b}(x,y)\ {\stackrel {\mathrm {def} }{=}}\ g_{a}((x-\Delta x){\bmod {M}},(y-\Delta y){\bmod {N}})} (where the images are M × N {\displaystyle \ M\times N} in size). Then, the discrete Fourier transforms of the images will be shifted relatively in phase: G b ( u , v ) = G a ( u , v ) e − 2 π i ( u Δ x M + v Δ y N ) {\displaystyle \mathbf {G} _{b}(u,v)=\mathbf {G} _{a}(u,v)e^{-2\pi i({\frac {u\Delta x}{M}}+{\frac {v\Delta y}{N}})}} One can then calculate the normalized cross-power spectrum to factor out the phase difference: R ( u , v ) = G a G b ∗ | G a G b ∗ | = G a G a ∗ e 2 π i ( u Δ x M + v Δ y N ) | G a G a ∗ e 2 π i ( u Δ x M + v Δ y N ) | = G a G a ∗ e 2 π i ( u Δ x M + v Δ y N ) | G a G a ∗ | = e 2 π i ( u Δ x M + v Δ y N ) {\displaystyle {\begin{aligned}R(u,v)&={\frac {\mathbf {G} _{a}\mathbf {G} _{b}^{}}{|\mathbf {G} _{a}\mathbf {G} _{b}^{}|}}\\&={\frac {\mathbf {G} _{a}\mathbf {G} _{a}^{}e^{2\pi i({\frac {u\Delta x}{M}}+{\frac {v\Delta y}{N}})}}{|\mathbf {G} _{a}\mathbf {G} _{a}^{}e^{2\pi i({\frac {u\Delta x}{M}}+{\frac {v\Delta y}{N}})}|}}\\&={\frac {\mathbf {G} _{a}\mathbf {G} _{a}^{}e^{2\pi i({\frac {u\Delta x}{M}}+{\frac {v\Delta y}{N}})}}{|\mathbf {G} _{a}\mathbf {G} _{a}^{}|}}\\&=e^{2\pi i({\frac {u\Delta x}{M}}+{\frac {v\Delta y}{N}})}\end{aligned}}} since the magnitude of an imaginary exponential always is one, and the phase of G a G a ∗ {\displaystyle \ \mathbf {G} _{a}\mathbf {G} _{a}^{}} always is zero. The inverse Fourier transform of a complex exponential is a Dirac delta function, i.e. a single peak: r ( x , y ) = δ ( x + Δ x , y + Δ y ) {\displaystyle \ r(x,y)=\delta (x+\Delta x,y+\Delta y)} This result could have been obtained by calculating the cross correlation directly. The advantage of this method is that the discrete Fourier transform and its inverse can be performed using the fast Fourier transform, which is much faster than correlation for large images. === Benefits === Unlike many spatial-domain algorithms, the phase correlation method is resilient to noise, occlusions, and other defects typical of medical or satellite images. The method can be extended to determine rotation and scaling differences between two images by first converting the images to log-polar coordinates. Due to properties of the Fourier transform, the rotation and scaling parameters can be determined in a manner invariant to translation. === Limitations === In practice, it is more likely that g b {\displaystyle \ g_{b}} will be a simple linear shift of g a {\displaystyle \ g_{a}} , rather than a circular shift as required by the explanation above. In such cases, r {\displaystyle \ r} will not be a simple delta function, which will reduce the performance of the method. In such cases, a window function (such as a Gaussian or Tukey window) should be employed during the Fourier transform to reduce edge effects, or the images should be zero padded so that the edge effects can be ignored. If the images consist of a flat background, with all detail situated away from the edges, then a linear shift will be equivalent to a circular shift, and the above derivation will hold exactly. The peak can be sharpened by using edge or vector correlation. For periodic images (such as a chessboard or picket fence), phase correlation may yield ambiguous results with several peaks in the resulting output. == Applications == Phase correlation is the preferred m

  Read more →
• 

  Lexxe

  Lexxe is an internet search engine that applies Natural Language Processing in its semantic search technology. Founded in 2005 by Dr. Hong Liang Qiao, Lexxe is based in Sydney, Australia. Today, Lexxe's key focus is on sentiment search with the launch of a news sentiment search site at News & Moods (www.newsandmoods.com). Lexxe has experienced several stages of change of focus in search technology: Lexxe launched its Alpha version in 2005, featuring Natural Language question answering (i.e. users could ask questions in English to the search engine apart from keyword searches — this feature has been suspended for redevelopment since 2010). It used only algorithms to extract answers from web pages, with no question-answer pair databases prepared in advance. In 2011, Lexxe launched a beta version with a new search technology called Semantic Key. Semantic Keys enable users to query with a conceptual keyword (or a keyword with a special meaning, hence the term Semantic Key) in order to find instances under the concept, e.g. price → $5.95 or €200, color → red, yellow, white. For example, “price: a pound of apples”, “color: ferrari”. With initial 500 Semantic Keys at the Beta launch, Lexxe became the first search engine in the world to offer this unique and useful search technology to the users. The cost of building Semantic Keys was too heavy though. In 2017, Lexxe launched News & Moods (www.newsandmoods.com), an open platform for news sentiment search, a first step towards sentiment search feature for the entire Internet search in Lexxe search engine. News & Moods also comes with smartphone apps in Android and iOS.

  Read more →
• 

  LanguageWare

  LanguageWare is a natural language processing (NLP) technology developed by IBM, which allows applications to process natural language text. It comprises a set of Java libraries that provide a range of NLP functions: language identification, text segmentation/tokenization, normalization, entity and relationship extraction, and semantic analysis and disambiguation. The analysis engine uses a finite-state machine approach at multiple levels, which aids its performance characteristics while maintaining a reasonably small footprint. The behaviour of the system is driven by a set of configurable lexico-semantic resources which describe the characteristics and domain of the processed language. A default set of resources comes as part of LanguageWare and these describe the native language characteristics, such as morphology, and the basic vocabulary for the language. Supplemental resources have been created that capture additional vocabularies, terminologies, rules and grammars, which may be generic to the language or specific to one or more domains. A set of Eclipse-based customization tooling, LanguageWare Resource Workbench, is available on IBM's alphaWorks site, and allows domain knowledge to be compiled into these resources and thereby incorporated into the analysis process. LanguageWare can be deployed as a set of UIMA-compliant annotators, Eclipse plug-ins or Web Services.

  Read more →
• 

  Neural style transfer

  Neural style transfer (NST) software algorithms are able to manipulate digital images, or videos, in order to adopt the appearance or visual style of another image. NST algorithms are characterized by their use of deep neural networks for the sake of image transformation. Common uses for NST are the creation of artificial artwork from photographs, for example by transferring the appearance of famous paintings to user-supplied photographs. Several notable mobile apps use NST techniques for this purpose, including DeepArt and Prisma. This method has been used by artists and designers around the globe to develop new artwork based on existent style(s). == History == NST is an example of image stylization, a problem studied for over two decades within the field of non-photorealistic rendering. The first two example-based style transfer algorithms were image analogies and image quilting. Both of these methods were based on patch-based texture synthesis algorithms. Given a training pair of images–a photo and an artwork depicting that photo–a transformation could be learned and then applied to create new artwork from a new photo, by analogy. If no training photo was available, it would need to be produced by processing the input artwork; image quilting did not require this processing step, though it was demonstrated on only one style. NST was first published in the paper "A Neural Algorithm of Artistic Style" by Leon Gatys et al., originally released to ArXiv 2015, and subsequently accepted by the peer-reviewed CVPR conference in 2016. The original paper used a VGG-19 architecture that has been pre-trained to perform object recognition using the ImageNet dataset. In 2017, Google AI introduced a method that allows a single deep convolutional style transfer network to learn multiple styles at the same time. This algorithm permits style interpolation in real-time, even when done on video media. == Mathematics == This section closely follows the original paper. === Overview === The idea of Neural Style Transfer (NST) is to take two images—a content image p → {\displaystyle {\vec {p}}} and a style image a → {\displaystyle {\vec {a}}} —and generate a third image x → {\displaystyle {\vec {x}}} that minimizes a weighted combination of two loss functions: a content loss L content ( p → , x → ) {\displaystyle {\mathcal {L}}_{\text{content }}({\vec {p}},{\vec {x}})} and a style loss L style ( a → , x → ) {\displaystyle {\mathcal {L}}_{\text{style }}({\vec {a}},{\vec {x}})} . The total loss is a linear sum of the two: L NST ( p → , a → , x → ) = α L content ( p → , x → ) + β L style ( a → , x → ) {\displaystyle {\mathcal {L}}_{\text{NST}}({\vec {p}},{\vec {a}},{\vec {x}})=\alpha {\mathcal {L}}_{\text{content}}({\vec {p}},{\vec {x}})+\beta {\mathcal {L}}_{\text{style}}({\vec {a}},{\vec {x}})} By jointly minimizing the content and style losses, NST generates an image that blends the content of the content image with the style of the style image. Both the content loss and the style loss measures the similarity of two images. The content similarity is the weighted sum of squared-differences between the neural activations of a single convolutional neural network (CNN) on two images. The style similarity is the weighted sum of Gram matrices within each layer (see below for details). The original paper used a VGG-19 CNN, but the method works for any CNN. === Symbols === Let x → {\textstyle {\vec {x}}} be an image input to a CNN. Let F l ∈ R N l × M l {\textstyle F^{l}\in \mathbb {R} ^{N_{l}\times M_{l}}} be the matrix of filter responses in layer l {\textstyle l} to the image x → {\textstyle {\vec {x}}} , where: N l {\textstyle N_{l}} is the number of filters in layer l {\textstyle l} ; M l {\textstyle M_{l}} is the height times the width (i.e. number of pixels) of each filter in layer l {\textstyle l} ; F i j l ( x → ) {\textstyle F_{ij}^{l}({\vec {x}})} is the activation of the i th {\textstyle i^{\text{th}}} filter at position j {\textstyle j} in layer l {\textstyle l} . A given input image x → {\textstyle {\vec {x}}} is encoded in each layer of the CNN by the filter responses to that image, with higher layers encoding more global features, but losing details on local features. === Content loss === Let p → {\textstyle {\vec {p}}} be an original image. Let x → {\textstyle {\vec {x}}} be an image that is generated to match the content of p → {\textstyle {\vec {p}}} . Let P l {\textstyle P^{l}} be the matrix of filter responses in layer l {\textstyle l} to the image p → {\textstyle {\vec {p}}} . The content loss is defined as the squared-error loss between the feature representations of the generated image and the content image at a chosen layer l {\displaystyle l} of a CNN: L content ( p → , x → , l ) = 1 2 ∑ i , j ( A i j l ( x → ) − A i j l ( p → ) ) 2 {\displaystyle {\mathcal {L}}_{\text{content }}({\vec {p}},{\vec {x}},l)={\frac {1}{2}}\sum _{i,j}\left(A_{ij}^{l}({\vec {x}})-A_{ij}^{l}({\vec {p}})\right)^{2}} where A i j l ( x → ) {\displaystyle A_{ij}^{l}({\vec {x}})} and A i j l ( p → ) {\displaystyle A_{ij}^{l}({\vec {p}})} are the activations of the i th {\displaystyle i^{\text{th}}} filter at position j {\displaystyle j} in layer l {\displaystyle l} for the generated and content images, respectively. Minimizing this loss encourages the generated image to have similar content to the content image, as captured by the feature activations in the chosen layer. The total content loss is a linear sum of the content losses of each layer: L content ( p → , x → ) = ∑ l v l L content ( p → , x → , l ) {\displaystyle {\mathcal {L}}_{\text{content }}({\vec {p}},{\vec {x}})=\sum _{l}v_{l}{\mathcal {L}}_{\text{content }}({\vec {p}},{\vec {x}},l)} , where the v l {\displaystyle v_{l}} are positive real numbers chosen as hyperparameters. === Style loss === The style loss is based on the Gram matrices of the generated and style images, which capture the correlations between different filter responses at different layers of the CNN: L style ( a → , x → ) = ∑ l = 0 L w l E l , {\displaystyle {\mathcal {L}}_{\text{style }}({\vec {a}},{\vec {x}})=\sum _{l=0}^{L}w_{l}E_{l},} where E l = 1 4 N l 2 M l 2 ∑ i , j ( G i j l ( x → ) − G i j l ( a → ) ) 2 . {\displaystyle E_{l}={\frac {1}{4N_{l}^{2}M_{l}^{2}}}\sum _{i,j}\left(G_{ij}^{l}({\vec {x}})-G_{ij}^{l}({\vec {a}})\right)^{2}.} Here, G i j l ( x → ) {\displaystyle G_{ij}^{l}({\vec {x}})} and G i j l ( a → ) {\displaystyle G_{ij}^{l}({\vec {a}})} are the entries of the Gram matrices for the generated and style images at layer l {\displaystyle l} . Explicitly, G i j l ( x → ) = ∑ k F i k l ( x → ) F j k l ( x → ) {\displaystyle G_{ij}^{l}({\vec {x}})=\sum _{k}F_{ik}^{l}({\vec {x}})F_{jk}^{l}({\vec {x}})} Minimizing this loss encourages the generated image to have similar style characteristics to the style image, as captured by the correlations between feature responses in each layer. The idea is that activation pattern correlations between filters in a single layer captures the "style" on the order of the receptive fields at that layer. Similarly to the previous case, the w l {\displaystyle w_{l}} are positive real numbers chosen as hyperparameters. === Hyperparameters === In the original paper, they used a particular choice of hyperparameters. The style loss is computed by w l = 0.2 {\displaystyle w_{l}=0.2} for the outputs of layers conv1_1, conv2_1, conv3_1, conv4_1, conv5_1 in the VGG-19 network, and zero otherwise. The content loss is computed by w l = 1 {\displaystyle w_{l}=1} for conv4_2, and zero otherwise. The ratio α / β ∈ [ 5 , 50 ] × 10 − 4 {\displaystyle \alpha /\beta \in [5,50]\times 10^{-4}} . === Training === Image x → {\displaystyle {\vec {x}}} is initially approximated by adding a small amount of white noise to input image p → {\displaystyle {\vec {p}}} and feeding it through the CNN. Then we successively backpropagate this loss through the network with the CNN weights fixed in order to update the pixels of x → {\displaystyle {\vec {x}}} . After several thousand epochs of training, an x → {\displaystyle {\vec {x}}} (hopefully) emerges that matches the style of a → {\displaystyle {\vec {a}}} and the content of p → {\displaystyle {\vec {p}}} . As of 2017, when implemented on a GPU, it takes a few minutes to converge. == Extensions == In some practical implementations, it is noted that the resulting image has too much high-frequency artifact, which can be suppressed by adding the total variation to the total loss. Compared to VGGNet, AlexNet does not work well for neural style transfer. NST has also been extended to videos. Subsequent work improved the speed of NST for images by using special-purpose normalizations. In a paper by Fei-Fei Li et al. adopted a different regularized loss metric and accelerated method for training to produce results in real-time (three orders of magnitude faster than Gatys). Their idea was to use not the pixel-based loss defined above but rather a 'perceptual loss' measuring t

  Read more →
• 

  Learnable function class

  In statistical learning theory, a learnable function class is a set of functions for which an algorithm can be devised to asymptotically minimize the expected risk, uniformly over all probability distributions. The concept of learnable classes are closely related to regularization in machine learning, and provides large sample justifications for certain learning algorithms. == Definition == === Background === Let Ω = X × Y = { ( x , y ) } {\displaystyle \Omega ={\mathcal {X}}\times {\mathcal {Y}}=\{(x,y)\}} be the sample space, where y {\displaystyle y} are the labels and x {\displaystyle x} are the covariates (predictors). F = { f : X ↦ Y } {\displaystyle {\mathcal {F}}=\{f:{\mathcal {X}}\mapsto {\mathcal {Y}}\}} is a collection of mappings (functions) under consideration to link x {\displaystyle x} to y {\displaystyle y} . L : Y × Y ↦ R {\displaystyle L:{\mathcal {Y}}\times {\mathcal {Y}}\mapsto \mathbb {R} } is a pre-given loss function (usually non-negative). Given a probability distribution P ( x , y ) {\displaystyle P(x,y)} on Ω {\displaystyle \Omega } , define the expected risk I P ( f ) {\displaystyle I_{P}(f)} to be: I P ( f ) = ∫ L ( f ( x ) , y ) d P ( x , y ) {\displaystyle I_{P}(f)=\int L(f(x),y)dP(x,y)} The general goal in statistical learning is to find the function in F {\displaystyle {\mathcal {F}}} that minimizes the expected risk. That is, to find solutions to the following problem: f ^ = arg ⁡ min f ∈ F I P ( f ) {\displaystyle {\hat {f}}=\arg \min _{f\in {\mathcal {F}}}I_{P}(f)} But in practice the distribution P {\displaystyle P} is unknown, and any learning task can only be based on finite samples. Thus we seek instead to find an algorithm that asymptotically minimizes the empirical risk, i.e., to find a sequence of functions { f ^ n } n = 1 ∞ {\displaystyle \{{\hat {f}}_{n}\}_{n=1}^{\infty }} that satisfies lim n → ∞ P ( I P ( f ^ n ) − inf f ∈ F I P ( f ) > ϵ ) = 0 {\displaystyle \lim _{n\rightarrow \infty }\mathbb {P} (I_{P}({\hat {f}}_{n})-\inf _{f\in {\mathcal {F}}}I_{P}(f)>\epsilon )=0} One usual algorithm to find such a sequence is through empirical risk minimization. === Learnable function class === We can make the condition given in the above equation stronger by requiring that the convergence is uniform for all probability distributions. That is: The intuition behind the more strict requirement is as such: the rate at which sequence { f ^ n } {\displaystyle \{{\hat {f}}_{n}\}} converges to the minimizer of the expected risk can be very different for different P ( x , y ) {\displaystyle P(x,y)} . Because in real world the true distribution P {\displaystyle P} is always unknown, we would want to select a sequence that performs well under all cases. However, by the no free lunch theorem, such a sequence that satisfies (1) does not exist if F {\displaystyle {\mathcal {F}}} is too complex. This means we need to be careful and not allow too "many" functions in F {\displaystyle {\mathcal {F}}} if we want (1) to be a meaningful requirement. Specifically, function classes that ensure the existence of a sequence { f ^ n } {\displaystyle \{{\hat {f}}_{n}\}} that satisfies (1) are known as learnable classes. It is worth noting that at least for supervised classification and regression problems, if a function class is learnable, then the empirical risk minimization automatically satisfies (1). Thus in these settings not only do we know that the problem posed by (1) is solvable, we also immediately have an algorithm that gives the solution. == Interpretations == If the true relationship between y {\displaystyle y} and x {\displaystyle x} is y ∼ f ∗ ( x ) {\displaystyle y\sim f^{}(x)} , then by selecting the appropriate loss function, f ∗ {\displaystyle f^{}} can always be expressed as the minimizer of the expected loss across all possible functions. That is, f ∗ = arg ⁡ min f ∈ F ∗ I P ( f ) {\displaystyle f^{}=\arg \min _{f\in {\mathcal {F}}^{}}I_{P}(f)} Here we let F ∗ {\displaystyle {\mathcal {F}}^{}} be the collection of all possible functions mapping X {\displaystyle {\mathcal {X}}} onto Y {\displaystyle {\mathcal {Y}}} . f ∗ {\displaystyle f^{}} can be interpreted as the actual data generating mechanism. However, the no free lunch theorem tells us that in practice, with finite samples we cannot hope to search for the expected risk minimizer over F ∗ {\displaystyle {\mathcal {F}}^{}} . Thus we often consider a subset of F ∗ {\displaystyle {\mathcal {F}}^{}} , F {\displaystyle {\mathcal {F}}} , to carry out searches on. By doing so, we risk that f ∗ {\displaystyle f^{}} might not be an element of F {\displaystyle {\mathcal {F}}} . This tradeoff can be mathematically expressed as In the above decomposition, part ( b ) {\displaystyle (b)} does not depend on the data and is non-stochastic. It describes how far away our assumptions ( F {\displaystyle {\mathcal {F}}} ) are from the truth ( F ∗ {\displaystyle {\mathcal {F}}^{}} ). ( b ) {\displaystyle (b)} will be strictly greater than 0 if we make assumptions that are too strong ( F {\displaystyle {\mathcal {F}}} too small). On the other hand, failing to put enough restrictions on F {\displaystyle {\mathcal {F}}} will cause it to be not learnable, and part ( a ) {\displaystyle (a)} will not stochastically converge to 0. This is the well-known overfitting problem in statistics and machine learning literature. == Example: Tikhonov regularization == A good example where learnable classes are used is the so-called Tikhonov regularization in reproducing kernel Hilbert space (RKHS). Specifically, let F ∗ {\displaystyle {\mathcal {F^{}}}} be an RKHS, and | | ⋅ | | 2 {\displaystyle ||\cdot ||_{2}} be the norm on F ∗ {\displaystyle {\mathcal {F^{}}}} given by its inner product. It is shown in that F = { f : | | f | | 2 ≤ γ } {\displaystyle {\mathcal {F}}=\{f:||f||_{2}\leq \gamma \}} is a learnable class for any finite, positive γ {\displaystyle \gamma } . The empirical minimization algorithm to the dual form of this problem is arg ⁡ min f ∈ F ∗ { ∑ i = 1 n L ( f ( x i ) , y i ) + λ | | f | | 2 } {\displaystyle \arg \min _{f\in {\mathcal {F}}^{}}\left\{\sum _{i=1}^{n}L(f(x_{i}),y_{i})+\lambda ||f||_{2}\right\}} This was first introduced by Tikhonov to solve ill-posed problems. Many statistical learning algorithms can be expressed in such a form (for example, the well-known ridge regression). The tradeoff between ( a ) {\displaystyle (a)} and ( b ) {\displaystyle (b)} in (2) is geometrically more intuitive with Tikhonov regularization in RKHS. We can consider a sequence of { F γ } {\displaystyle \{{\mathcal {F}}_{\gamma }\}} , which are essentially balls in F ∗ {\displaystyle {\mathcal {F^{}}}} with centers at 0. As γ {\displaystyle \gamma } gets larger, F γ {\displaystyle {\mathcal {F}}_{\gamma }} gets closer to the entire space, and ( b ) {\displaystyle (b)} is likely to become smaller. However we will also suffer smaller convergence rates in ( a ) {\displaystyle (a)} . The way to choose an optimal γ {\displaystyle \gamma } in finite sample settings is usually through cross-validation. == Relationship to empirical process theory == Part ( a ) {\displaystyle (a)} in (2) is closely linked to empirical process theory in statistics, where the empirical risk { ∑ i = 1 n L ( y i , f ( x i ) ) , f ∈ F } {\displaystyle \{\sum _{i=1}^{n}L(y_{i},f(x_{i})),f\in {\mathcal {F}}\}} are known as empirical processes. In this field, the function class F {\displaystyle {\mathcal {F}}} that satisfies the stochastic convergence are known as uniform Glivenko–Cantelli classes. It has been shown that under certain regularity conditions, learnable classes and uniformly Glivenko-Cantelli classes are equivalent. Interplay between ( a ) {\displaystyle (a)} and ( b ) {\displaystyle (b)} in statistics literature is often known as the bias-variance tradeoff. However, note that in the authors gave an example of stochastic convex optimization for General Setting of Learning where learnability is not equivalent with uniform convergence.

  Read more →
• 

  Virtual assistant

  A virtual assistant (VA) is a software agent that can perform a range of tasks or services for a user based on user input, such as commands or questions, including verbal ones. Such technologies often incorporate chatbot capabilities to streamline task execution. The interaction may be via text, graphical interface, or voice, as some virtual assistants are able to interpret human speech and respond via synthesized voices. In many cases, users can ask their virtual assistants questions, control home automation devices and media playback, and manage other basic tasks such as email, to-do lists, and calendars – all with verbal commands. In recent years, prominent virtual assistants for direct consumer use have included Apple Siri, Amazon Alexa, Google Assistant (Gemini), Microsoft Copilot and Samsung Bixby. Also, companies in various industries often incorporate some kind of virtual assistant technology into their customer service or support. Into the 2020s, the emergence of artificial intelligence based chatbots, such as ChatGPT, has brought increased capability and interest to the field of virtual assistant products and services. == History == === Experimental decades: 1910s–1980s === Radio Rex was the first voice-activated toy, patented in 1916 and released in 1922. It was a wooden toy in the shape of a dog that would come out of its house when its name is called. In 1952, Bell Labs presented "Audrey", the Automatic Digit Recognition machine. It occupied a six-foot-high relay rack, consumed substantial power, had streams of cables and exhibited the myriad maintenance problems associated with complex vacuum-tube circuitry. It could recognize the fundamental units of speech, phonemes. It was limited to the accurate recognition of digits spoken by designated talkers. It could therefore be used for voice dialing, but in most cases, push-button dialing was cheaper and faster, rather than speaking the consecutive digits. Another early tool which was enabled to perform digital speech recognition was the IBM Shoebox voice-activated calculator, presented to the general public during the 1962 Seattle World's Fair after its initial market launch in 1961. This early computer, developed almost 20 years before the introduction of the first IBM Personal Computer in 1981, was able to recognize 16 spoken words and the digits 0 to 9. The first natural language processing computer program or the chatbot ELIZA was developed by MIT professor Joseph Weizenbaum in the 1960s. It was created to "demonstrate that the communication between man and machine was superficial". ELIZA used pattern matching and substitution methodology into scripted responses to simulate conversation, which gave an illusion of understanding on the part of the program. Weizenbaum's own secretary reportedly asked Weizenbaum to leave the room so that she and ELIZA could have a real conversation. Weizenbaum was surprised by this, later writing: "I had not realized ... that extremely short exposures to a relatively simple computer program could induce powerful delusional thinking in quite normal people. This gave name to the ELIZA effect, the tendency to unconsciously assume computer behaviors are analogous to human behaviors; that is, anthropomorphisation, a phenomenon present in human interactions with virtual assistants. The next milestone in the development of voice recognition technology was achieved in the 1970s at the Carnegie Mellon University in Pittsburgh, Pennsylvania with substantial support of the United States Department of Defense and its DARPA agency, funded five years of a Speech Understanding Research program, aiming to reach a minimum vocabulary of 1,000 words. Companies and academia including IBM, Carnegie Mellon University (CMU) and Stanford Research Institute took part in the program. The result was "Harpy", it mastered about 1000 words, the vocabulary of a three-year-old and it could understand sentences. It could process speech that followed pre-programmed vocabulary, pronunciation, and grammar structures to determine which sequences of words made sense together, and thus reducing speech recognition errors. In 1986, Tangora was an upgrade of the Shoebox, it was a voice recognizing typewriter. Named after the world's fastest typist at the time, it had a vocabulary of 20,000 words and used prediction to decide the most likely result based on what was said in the past. IBM's approach was based on a hidden Markov model, which adds statistics to digital signal processing techniques. The method makes it possible to predict the most likely phonemes to follow a given phoneme. Still each speaker had to individually train the typewriter to recognize their voice, and pause between each word. In 1983, Gus Searcy invented the "Butler in a Box", an electronic voice home controller system. === Birth of smart virtual assistants: 1990s–2010s === In the 1990s, digital speech recognition technology became a feature of the personal computer with IBM, Philips and Lernout & Hauspie fighting for customers. Much later the market launch of the first smartphone IBM Simon in 1994 laid the foundation for smart virtual assistants as we know them today. In 1997, Dragon's NaturallySpeaking software could recognize and transcribe natural human speech without pauses between each word into a document at a rate of 100 words per minute. A version of Naturally Speaking is still available for download and it is still used today, for instance, by many doctors in the US and the UK to document their medical records. In 2001 Colloquis publicly launched SmarterChild, on platforms like AIM and MSN Messenger. While entirely text-based SmarterChild was able to play games, check the weather, look up facts, and converse with users to an extent. The first modern digital virtual assistant installed on a smartphone was Siri, which was introduced as a feature of the iPhone 4S on 4 October 2011. Apple Inc. developed Siri following the 2010 acquisition of Siri Inc., a spin-off of SRI International, which is a research institute financed by DARPA and the United States Department of Defense. Its aim was to aid in tasks such as sending a text message, making phone calls, checking the weather or setting up an alarm. Over time, it has developed to provide restaurant recommendations, search the internet, and provide driving directions. In November 2014, Amazon announced Alexa alongside the Echo. In 2016, Salesforce debuted Einstein, developed from a set of technologies underlying the Salesforce platform. Einstein was replaced by Agentforce, an agentic AI, in September 2024. In April 2017 Amazon released a service for building conversational interfaces for any type of virtual assistant or interface. === Large Language Models: 2020s-present === In the 2020s, artificial intelligence (AI) systems like ChatGPT have gained popularity for their ability to generate human-like responses to text-based conversations. In February 2020, Microsoft introduced its Turing Natural Language Generation (T-NLG), which was then the "largest language model ever published at 17 billion parameters." On November 30, 2022, ChatGPT was launched as a prototype and quickly garnered attention for its detailed responses and articulate answers across many domains of knowledge. The advent of ChatGPT and its introduction to the wider public increased interest and competition in the space. In February 2023, Google began introducing an experimental service called "Bard" which is based on its LaMDA program to generate text responses to questions asked based on information gathered from the web. While ChatGPT and other generalized chatbots based on the latest generative AI are capable of performing various tasks associated with virtual assistants, there are also more specialized forms of such technology that are designed to target more specific situations or needs. == Method of interaction == Virtual assistants work via: Text, including: online chat (especially in an instant messaging application or other application ), SMS text, e-mail or other text-based communication channel, for example Conversica's intelligent virtual assistants for business. Voice: for example with Amazon Alexa on Amazon Echo devices, Siri on an iPhone, Google Assistant on Google-enabled Android devices, or Bixby on Samsung devices. Images: some assistants, such as Google Assistant (which includes Google Lens) and Bixby on the Samsung Galaxy series, have the added capability of performing image processing to recognize objects in images. Many virtual assistants are accessible via multiple methods, offering versatility in how users can interact with them, whether through chat, voice commands, or other integrated technologies. Virtual assistants use natural language processing (NLP) to match user text or voice input to executable commands. Some continually learn using artificial intelligence techniques including machine learning and ambient intelligence. To activate a virtual assistant u

  Read more →
• 

  Mean shift

  Mean shift is a non-parametric feature-space mathematical analysis technique for locating the maxima of a density function, a so-called mode-seeking algorithm. Application domains include cluster analysis in computer vision and image processing. == History == The mean shift procedure is usually credited to work by Fukunaga and Hostetler in 1975. It is, however, reminiscent of earlier work by Schnell in 1964. == Overview == Mean shift is a procedure for locating the maxima—the modes—of a density function given discrete data sampled from that function. This is an iterative method, and we start with an initial estimate x {\displaystyle x} . Let a kernel function K ( x i − x ) {\displaystyle K(x_{i}-x)} be given. This function determines the weight of nearby points for re-estimation of the mean. Typically a Gaussian kernel on the distance to the current estimate is used, K ( x i − x ) = e − c | | x i − x | | 2 {\displaystyle K(x_{i}-x)=e^{-c||x_{i}-x||^{2}}} . The weighted mean of the density in the window determined by K {\displaystyle K} is m ( x ) = ∑ x i ∈ N ( x ) K ( x i − x ) x i ∑ x i ∈ N ( x ) K ( x i − x ) {\displaystyle m(x)={\frac {\sum _{x_{i}\in N(x)}K(x_{i}-x)x_{i}}{\sum _{x_{i}\in N(x)}K(x_{i}-x)}}} where N ( x ) {\displaystyle N(x)} is the neighborhood of x {\displaystyle x} , a set of points for which K ( x i − x ) ≠ 0 {\displaystyle K(x_{i}-x)\neq 0} . The difference m ( x ) − x {\displaystyle m(x)-x} is called mean shift in Fukunaga and Hostetler. The mean-shift algorithm now sets x ← m ( x ) {\displaystyle x\leftarrow m(x)} , and repeats the estimation until m ( x ) {\displaystyle m(x)} converges. Although the mean shift algorithm has been widely used in many applications, a rigid proof for the convergence of the algorithm using a general kernel in a high dimensional space is still not known. Aliyari Ghassabeh showed the convergence of the mean shift algorithm in one dimension with a differentiable, convex, and strictly decreasing profile function. However, the one-dimensional case has limited real world applications. Also, the convergence of the algorithm in higher dimensions with a finite number of the stationary (or isolated) points has been proved. However, sufficient conditions for a general kernel function to have finite stationary (or isolated) points have not been provided. Gaussian Mean-Shift is an Expectation–maximization algorithm. == Details == Let data be a finite set S {\displaystyle S} embedded in the n {\displaystyle n} -dimensional Euclidean space, X {\displaystyle X} . Let K {\displaystyle K} be a flat kernel that is the characteristic function of the λ {\displaystyle \lambda } -ball in X {\displaystyle X} , In each iteration of the algorithm, s ← m ( s ) {\displaystyle s\leftarrow m(s)} is performed for all s ∈ S {\displaystyle s\in S} simultaneously. The first question, then, is how to estimate the density function given a sparse set of samples. One of the simplest approaches is to just smooth the data, e.g., by convolving it with a fixed kernel of width h {\displaystyle h} , where x i {\displaystyle x_{i}} are the input samples and k ( r ) {\displaystyle k(r)} is the kernel function (or Parzen window). h {\displaystyle h} is the only parameter in the algorithm and is called the bandwidth. This approach is known as kernel density estimation or the Parzen window technique. Once we have computed f ( x ) {\displaystyle f(x)} from the equation above, we can find its local maxima using gradient ascent or some other optimization technique. The problem with this "brute force" approach is that, for higher dimensions, it becomes computationally prohibitive to evaluate f ( x ) {\displaystyle f(x)} over the complete search space. Instead, mean shift uses a variant of what is known in the optimization literature as multiple restart gradient descent. Starting at some guess for a local maximum, y k {\displaystyle y_{k}} , which can be a random input data point x 1 {\displaystyle x_{1}} , mean shift computes the gradient of the density estimate f ( x ) {\displaystyle f(x)} at y k {\displaystyle y_{k}} and takes an uphill step in that direction. == Types of kernels == Kernel definition: Let X {\displaystyle X} be the n {\displaystyle n} -dimensional Euclidean space, R n {\displaystyle \mathbb {R} ^{n}} . The norm of x {\displaystyle x} is a non-negative number, ‖ x ‖ 2 = x ⊤ x ≥ 0 {\displaystyle \|x\|^{2}=x^{\top }x\geq 0} . A function K : X → R {\displaystyle K:X\rightarrow \mathbb {R} } is said to be a kernel if there exists a profile, k : [ 0 , ∞ ] → R {\displaystyle k:[0,\infty ]\rightarrow \mathbb {R} } , such that K ( x ) = k ( ‖ x ‖ 2 ) {\displaystyle K(x)=k(\|x\|^{2})} and k is non-negative. k is non-increasing: k ( a ) ≥ k ( b ) {\displaystyle k(a)\geq k(b)} if a < b {\displaystyle a Read more →

• 

  Backend as a service

  Backend as a service (BaaS), sometimes also referred to as mobile backend as a service (MBaaS), is a service for providing web app and mobile app developers with a way to easily build a backend to their frontend applications. Features available include user management, push notifications, and integration with social networking services. These services are provided via the use of custom software development kits (SDKs) and application programming interfaces (APIs). BaaS is a relatively recent development in cloud computing, with most BaaS startups dating from 2011 or later. Some of the most popular service providers are AWS Amplify and Firebase. == Purpose == Web and mobile apps require a similar set of features on the backend, including notification service, integration with social networks, and cloud storage. Each of these services has its own API that must be individually incorporated into an app, a process that can be time-consuming and complicated for app developers. BaaS providers form a bridge between the frontend of an application and various cloud-based backends via a unified API and SDK. Providing a consistent way to manage backend data means that developers do not need to redevelop their own backend for each of the services that their apps need to access, potentially saving both time and money. Although similar to other cloud-computing business models, such as serverless computing, software as a service (SaaS), infrastructure as a service (IaaS), and platform as a service (PaaS), BaaS is distinct from these other services in that it specifically addresses the cloud-computing needs of web and mobile app developers by providing a unified means of connecting their apps to cloud services. == Features == BaaS providers offer different set of features and backend tools. Some of the most common features include: Database management. Most BaaS solutions provide SQL and/or NoSQL database management services for applications. Developers can store their app data without deploying and managing databases themselves. BaaS usually provides client SDKs, REST and GraphQL APIs for the frontend to interact with databases. File storage. BaaS providers often offer storage solutions for media files, user uploads, and other binary data. Applications can upload, download, and delete files through provided SDKs and APIs. Authentication and authorization. Some BaaS offer authentication and authorization services that allow developers to easily manage app users. This includes user sign-up, login, password reset, social media login integration through OAuth, user group and permission management etc. Notification service. Some BaaS providers such as Firebase and AWS Amplify have notification services that can send custom emails to users and push native notifications on mobile platforms. This is especially useful for applications that need to send messages, alerts, and reminders. Cloud functions. Some BaaS allow developers to deploy and run serverless functions. The functions are usually stateless and can be triggered by various ways including HTTP requests, SDK invocation, background server events, and cloud scheduled executions. Different providers offer runtime support for different languages, some of the popular languages are JavaScript/TypeScript (Node.js, Deno), Python, Java/Kotlin. Cloud functions extend the potential and flexibility of BaaS by allowing developers to write custom functionalities for their apps, working in a way similar to a traditional REST API backend framework. Usage analytics. Analytics data about application usage is often included in BaaS. This allows developers to monitor user behaviors and make decisions correspondingly in marketing strategies and performance optimizations. UI design. Some BaaS providers, such as AWS Amplify and Backendless, offer user interface designing tools that help developers design the frontend UI of web and mobile apps. While this may be useful for small teams and individual developers, UI design assistance may not be conventional in BaaS as it goes beyond the scope of backend infrastructure. Real-Time. Real-time features in a BaaS platform ensure that data updates and synchronizations occur instantly across all clients, making changes immediately visible to users. This is crucial for applications like live chat and collaborative tools, using technologies like WebSockets to maintain continuous server-client connections. == Service providers == BaaS providers have a broad focus, providing SDKs and APIs that work for app development on multiple platforms with different technology stacks, such as JavaScript (for Web apps), Flutter, Java/Kotlin (for Android apps), Swift/Objective-C (for iOS/MacOS/WatchOS/TvOS apps), .NET (for Windows) and others. BaaS providers also come in different types, suiting developers of different needs. === Cloud-based BaaS === Most BaaS providers host backend platforms on their cloud servers. They also manage the infrastructure, security, and scalability of the platforms. Developers can access the backend services via a web interface or the provided APIs. Some examples of cloud-based BaaS include Firebase (hosted on Google Cloud Platform), AWS Amplify (hosted on Amazon Web Services), and Microsoft Azure Mobile Apps (hosted on Microsoft Azure). === Self-hosted BaaS === Self-hosted BaaS allow developers to host backend on their own servers, providing more flexibility and potential to customization compared to cloud-based BaaS, which often is more difficult to migrate from. However, developers are also in charge of managing the infrastructure, security, and scalability of their servers. === Mobile BaaS === Mobile backend as a service (MBaaS) is a type of BaaS specifically for applications deployed in mobile systems. While some references use MBaaS interchangeably for BaaS, BaaS can have a wider variety of support such as for web apps and desktop apps. == Business model == BaaS providers generate revenue from their services in various ways, often using a freemium model. Under this model, a client receives a certain number of free active users or API calls per month, and pays a fee for each user or call over this limit. Alternatively, clients can pay a set fee for a package which allows for a greater number of calls or active users per month. There are also flat fee plans that make the pricing more predictable. Some of the providers offer the unlimited API calls inside their free plan offerings. Another business model that has been used by a lot of BaaS providers is PAYG (pay as you go), which has a flexible cost based on developers' usage of database, storage, bandwidth, function calls, user numbers etc.

  Read more →
• 

  Document classification

  Document classification or document categorization is a problem in library science, information science and computer science. The task is to assign a document to one or more classes or categories. This may be done "manually" (or "intellectually") or algorithmically. The intellectual classification of documents has mostly been the province of library science, while the algorithmic classification of documents is mainly in information science and computer science. The problems are overlapping, however, and there is therefore interdisciplinary research on document classification. The documents to be classified may be texts, images, music, etc. Each kind of document possesses its special classification problems. When not otherwise specified, text classification is implied. Documents may be classified according to their subjects or according to other attributes (such as document type, author, printing year etc.). In the rest of this article only subject classification is considered. There are two main philosophies of subject classification of documents: the content-based approach and the request-based approach. == "Content-based" versus "request-based" classification == Content-based classification is classification in which the weight given to particular subjects in a document determines the class to which the document is assigned. It is, for example, a common rule for classification in libraries, that at least 20% of the content of a book should be about the class to which the book is assigned. In automatic classification it could be the number of times given words appears in a document. Request-oriented classification (or -indexing) is classification in which the anticipated request from users is influencing how documents are being classified. The classifier asks themself: “Under which descriptors should this entity be found?” and “think of all the possible queries and decide for which ones the entity at hand is relevant” (Soergel, 1985, p. 230). Request-oriented classification may be classification that is targeted towards a particular audience or user group. For example, a library or a database for feminist studies may classify/index documents differently when compared to a historical library. It is probably better, however, to understand request-oriented classification as policy-based classification: The classification is done according to some ideals and reflects the purpose of the library or database doing the classification. In this way it is not necessarily a kind of classification or indexing based on user studies. Only if empirical data about use or users are applied should request-oriented classification be regarded as a user-based approach. == Classification versus indexing == Sometimes a distinction is made between assigning documents to classes ("classification") versus assigning subjects to documents ("subject indexing") but as Frederick Wilfrid Lancaster has argued, this distinction is not fruitful. "These terminological distinctions,” he writes, “are quite meaningless and only serve to cause confusion” (Lancaster, 2003, p. 21). The view that this distinction is purely superficial is also supported by the fact that a classification system may be transformed into a thesaurus and vice versa (cf., Aitchison, 1986, 2004; Broughton, 2008; Riesthuis & Bliedung, 1991). Therefore, assigning a subject term to a document in an index is equivalent to assigning that document to the class of documents indexed by that term (all documents indexed or classified as X belong to the same class of documents). == Automatic document classification (ADC) == Automatic document classification tasks can be divided into three sorts: supervised document classification where some external mechanism (such as human feedback) provides information on the correct classification for documents, unsupervised document classification (also known as document clustering), where the classification must be done entirely without reference to external information, and semi-supervised document classification, where parts of the documents are labeled by the external mechanism. There are several software products under various license models available. === Techniques === Automatic document classification techniques include: Artificial neural network Concept Mining Decision trees such as ID3 or C4.5 Expectation maximization (EM) Instantaneously trained neural networks Latent semantic indexing Multiple-instance learning Naive Bayes classifier Natural language processing approaches Rough set-based classifier Soft set-based classifier Support vector machines (SVM) K-nearest neighbour algorithms tf–idf == Applications == Classification techniques have been applied to spam filtering, a process which tries to discern E-mail spam messages from legitimate emails email routing, sending an email sent to a general address to a specific address or mailbox depending on topic language identification, automatically determining the language of a text genre classification, automatically determining the genre of a text readability assessment, automatically determining the degree of readability of a text, either to find suitable materials for different age groups or reader types or as part of a larger text simplification system sentiment analysis, determining the attitude of a speaker or a writer with respect to some topic or the overall contextual polarity of a document. health-related classification using social media in public health surveillance article triage, selecting articles that are relevant for manual literature curation, for example as is being done as the first step to generate manually curated annotation databases in biology

  Read more →
• 

  Conversica

  Conversica is a US-based cloud software technology company, headquartered in San Mateo, California, that provides two-way AI-driven conversational software and a suite of Intelligent Virtual Assistants for businesses to engage customers via email, chat, and SMS. == History == 2007: The company was founded by Ben Brigham in Bellingham, Washington, originally as AutoFerret.com. The company's initial product was a Customer Relationship Management (CRM) targeted at automotive dealerships. This soon expanded to lead generation, and then lead validation and qualification. The AI Conversica uses currently was made to follow up on and filter out low-quality leads. The focus of the company shifted toward this automated lead engagement technology. 2010: The company started commercially selling AVA, the first Automated Virtual Assistant for sales, and the company name was changed to AVA.ai. Early customers for AVA were automotive dealerships. As the company moved away from generating leads themselves, and providing the CRM themselves, it became necessary to integrate with existing CRM and Marketing Automation platforms, such as DealerSocket, VinSolutions and Salesforce. 2013: The company raised $16m Series A funding, led by Kennet Partners, and named Mark Bradley as CEO. It also moved its headquarters from Bellingham, Washington to Foster City, California. 2014: The company changed its name from AVA.ai to Conversica. 2015: Alex Terry joined Conversica as its CEO. The business expanded to include customers in additional verticals, including technology, education, and financial services. 2016: The company raised $34m Series B funding, led by Providence Strategic Growth. 2017: Conversica expanded its intelligent automation platform and IVAs to support additional communication channels (e-mail and SMS text messaging) and communication languages. Conversica also opened a new technology center in Seattle, Washington to expand its AI and machine learning capabilities. 2018: The company raised $31m Series C funding, led by Providence Strategic Growth. Conversica also acquired Intelligens.ai, providing a regional presence in Latin America with an office in Las Condes, Santiago, Chile. The company launched an AI-powered Admissions Assistant for Higher Education industry. 2019: Conversica was selected by Fast Company magazine as one of the Top 10 Most Innovative AI Companies in the World, and was named Marketo's Technology Partner of the Year. The company officially expanded into the EMEA region with the opening of a London office. As of August 2019, Conversica has over 50 different integrations with third parties. In October Conversica won three awards at the fourth annual Global Annual Achievement Awards for Artificial Intelligence. Also that month, Alex Terry stepped down from his role as CEO and was replaced by Jim Kaskade. 2020: As part of Conversica's response to COVID-19, they optimized the business to become profitable in both 2Q20 and 3Q20, before reinvesting in 4Q20. The company transitioned both international operations in EMEA and LATAM to an indirect model with partners (LeadFabric and Nectia Cloud Solutions respectively), and moved a portion of its US-based employees to near-shore centers in Mexico and Brazil, effectively downsizing the company from 250 to 200. Conversica's reseller partner, Nectia, is a major Latin American affiliate and Chile's number one Salesforce partner, and, as part of the partnership, Nectia devoted capital to a brand new company segment, Predict-IA, dedicated to web-based artificial intelligent solutions. Predict-IA was able to immediately service all LATAM opportunities and clients with Conversica's AI Assistants with end-to-end services (marketing, sales, professional services, customer success, and technical support). Conversica's reseller partner, Leadfabric, has offices in Belgium, Amsterdam, Paris, UK, Taiwan, and Romania. == Technology == Conversica's Revenue Digital Assistants™ are AI assistants who engage with leads, prospects, customers, employees, and other persons of interest (Contacts) in a two-way human-like manner, via email, SMS text, and website chat, in English, French, German, Spanish, Portuguese, and Japanese. The RDAs are built on an Intelligent Automation platform that leverages natural language understanding, natural language processing, natural language generation, deep learning and machine learning. The Assistants are generally deployed alongside sales and marketing, customer success, account management, and higher education admissions teams, as part of an augmented workforce. The Intelligent Automation platform integrates with over 50 external systems, including CRM, Marketing Automation, and other systems of record. A partial list of integration partners includes: Salesforce, Marketo, Oracle, HubSpot, DealerSocket, Reynolds & Reynolds, CDK Global, VinSolutions and many more.

  Read more →
• 

  AFNLP

  AFNLP (Asian Federation of Natural Language Processing Associations) is the organization for coordinating the natural language processing related activities and events in the Asia-Pacific region. == Foundation == AFNLP was founded on 4 October 2000. == Member Associations == ALTA – Australasian Language Technology Association ANLP Japan Association of Natural Language Processing ROCLING Taiwan ROC Computational Linguistics Society SIG-KLC Korea SIG-Korean Language Computing of Korea Information Science Society == Existing Asian Initiatives == NLPRS: Natural Language Processing Pacific Rim Symposium IRAL: International Workshop on Information Retrieval with Asian Languages PACLING: Pacific Association for Computational Linguistics PACLIC: Pacific Asia Conference on Language, Information and Computation PRICAI: Pacific Rim International Conference on AI ICCPOL: International Conference on Computer Processing of Oriental Languages ROCLING: Research on Computational Linguistics Conference == Conferences == IJCNLP-04: The 1st International Joint Conference on Natural Language Processing in Hainan Island, China IJCNLP-05: The 2nd International Joint Conference on Natural Language Processing in Jeju Island, Korea IJCNLP-08: The 3rd International Joint Conference on Natural Language Processing in Hyderabad, India ACL-IJCNLP-2009: Joint Conference of the 47th Annual Meeting of the Association for Computational Linguistics (ACL) and 4th International Joint Conference on Natural Language Processing (IJCNLP) in Singapore IJNCLP-11: The 5th International Joint Conference on Natural Language Processing in Chiang Mai, Thailand

  Read more →