AI Art Generator From Image

AI Art Generator From Image — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

PARRY

PARRY was an early example of a chatbot, implemented in 1972 by psychiatrist Kenneth Colby. == History == PARRY was written in 1972 by psychiatrist Kenneth Colby, then at Stanford University. While ELIZA was a simulation of a Rogerian therapist, PARRY attempted to simulate a person with paranoid schizophrenia. The program implemented a crude model of the behavior of a person with paranoid schizophrenia based on concepts, conceptualizations, and beliefs (judgements about conceptualizations: accept, reject, neutral). It also embodied a conversational strategy, and as such was a much more serious and advanced program than ELIZA. It was described as "ELIZA with attitude". PARRY was tested in the early 1970s using a variation of the Turing Test. A group of experienced psychiatrists analysed a combination of real patients and computers running PARRY through teleprinters. Another group of 33 psychiatrists were shown transcripts of the conversations. The two groups were then asked to identify which of the "patients" were human and which were computer programs. The psychiatrists were able to make the correct identification only 48 percent of the time — a figure consistent with random guessing. PARRY and ELIZA (also known as "the Doctor") interacted several times. The most famous of these exchanges occurred at the ICCC 1972, where PARRY and ELIZA were hooked up over ARPANET and responded to each other.
Read more →
Bright Computing

Bright Computing, Inc. was a developer of software for deploying and managing high-performance (HPC) clusters, Kubernetes clusters, and OpenStack private clouds in on-premises data centers as well as in the public cloud. In 2022, it was acquired by Nvidia. == History == Bright Computing was founded by Matthijs van Leeuwen in 2009, who spun the company out of ClusterVision, which he had co-founded with Alex Ninaber and Arijan Sauer. Alex and Matthijs had worked together at UK’s Compusys, which was one of the first companies to commercially build HPC clusters. They left Compusys in 2002 to start ClusterVision in the Netherlands, after determining there was a growing market for building and managing supercomputer clusters using off-the-shelf hardware components and open source software, tied together with their own customized scripts. ClusterVision also provided delivery and installation support services for HPC clusters at universities and government entities. In 2004, Martijn de Vries joined ClusterVision and began development of cluster management software. The software was made available to customers in 2008, under the name ClusterVisionOS v4. In 2009, Bright Computing was spun out of ClusterVision. ClusterVisionOS was renamed Bright Cluster Manager, and van Leeuwen was named Bright Computing’s CEO. In February 2016, Bright appointed Bill Wagner as chief executive officer. Matthijs van Leeuwen became chief strategy officer, and then left the company and board of directors in 2018. In January 2022 Bright was acquired by Nvidia. Nvidia cited using Bright's Amsterdam facility as a development center. The acquisition occurred after several layoffs under Bill Wagner. == Customers == Early customers included Boeing, Sandia National Laboratories, Virginia Tech, Hewlett Packard, NSA, and Drexel University. Many early customers were introduced through resellers, including SICORP, Cray, Dell, and Advanced HPC. As of 2019, the company had more than 700 customers, including more than fifty Fortune 500 Companies. == Products and services == Bright Cluster Manager for HPC lets customers deploy and manage complete clusters. It provides management for the hardware, the operating system, the HPC software, and users. In 2014, the company announced Bright OpenStack, software to deploy, provision, and manage OpenStack-based private cloud infrastructures. In 2016, Bright started bundling several machine learning frameworks and associated tools and libraries with the product, to make it very easy to get machine learning workload up and running on a Bright cluster. In December 2018, version 8.2 was released, which introduced support for the ARM64 architecture, edge capabilities to build clusters spread out over many different geographical locations, improved workload accounting & reporting features, as well as many improvements to Bright's integration with Kubernetes. Bright Cluster Manager software was frequently sold through original equipment manufacturer (OEM) resellers, including Dell and HPE. In version 10, Bright Cluster Manager was merged into the NVIDIA Base Command Manager. Bright Computing was covered by Software Magazine and Yahoo! Finance, among other publications. == Awards == In 2016, Bright Computing was awarded a €1.5M Horizon 2020 SME Instrument grant from the European Commission. Bright Computing was one of only 33 grant recipients from 960 submitted proposals. In its category only 5 out of 260 grants were awarded. 2015 HPCwire Editor’s Choice Award for “Best HPC Cluster Solution or Technology" Main Software 50 “Highest Growth” award winner, 2013 Deloitte Technology Fast50 “Rising Star 2013” award winner Bio-IT World Conference & Expo ‘13, Boston, MA, winner of “IT Hardware & Infrastructure” category of the “Best of Show Award” program Red Herring Top 100 Global Award, 2013
Read more →
Apache Kudu

Apache Kudu is a free and open source column-oriented data store of the Apache Hadoop ecosystem. It is compatible with most of the data processing frameworks in the Hadoop environment. It provides completeness to Hadoop's storage layer to enable fast analytics on fast data. The open source project to build Apache Kudu began as internal project at Cloudera. The first version Apache Kudu 1.0 was released 19 September 2016. == Comparison with other storage engines == Kudu was designed and optimized for OLAP workloads. Like HBase, it is a real-time store that supports key-indexed record lookup and mutation. Kudu differs from HBase since Kudu's datamodel is a more traditional relational model, while HBase is schemaless. Kudu's "on-disk representation is truly columnar and follows an entirely different storage design than HBase/Bigtable".
Read more →
Charge-coupled device

A charge-coupled device (CCD) is an integrated circuit containing an array of linked, or coupled, capacitors. Under the control of an external circuit, each capacitor can transfer its electric charge to a neighboring capacitor. CCD sensors are a major technology used in digital imaging. In a CCD image sensor, pixels are represented by p-doped metal–oxide–semiconductor (MOS) capacitors. These MOS capacitors, the basic building blocks of a CCD, are biased above the threshold for inversion when image acquisition begins, allowing the conversion of incoming photons into electron charges at the semiconductor-oxide interface; the CCD is then used to read out these charges. Although CCDs are not the only technology to allow for light detection, CCD image sensors are widely used in professional, medical, and scientific applications where high-quality image data are required. In applications with less exacting quality demands, such as consumer and professional digital cameras, active pixel sensors, also known as CMOS sensors (complementary MOS sensors), are generally used. However, the large quality advantage CCDs enjoyed early on has narrowed over time and since the late 2010s CMOS sensors are the dominant technology, having largely if not completely replaced CCD image sensors. == History == The basis for the CCD is the metal–oxide–semiconductor (MOS) structure, with MOS capacitors being the basic building blocks of a CCD, and a depleted MOS structure used as the photodetector in early CCD devices. In the late 1960s, Willard Boyle and George E. Smith at Bell Labs were researching MOS technology while working on semiconductor bubble memory. They realized that an electric charge was the analog of the magnetic bubble and that it could be stored on a tiny MOS capacitor. As it was fairly straightforward to fabricate a series of MOS capacitors in a row, they connected a suitable voltage to them so that the charge could be stepped along from one to the next. This led to the invention of the charge-coupled device by Boyle and Smith in 1969. They conceived of the design of what they termed, in their notebook, "Charge 'Bubble' Devices". The initial paper describing the concept in April 1970 listed possible uses as memory, a delay line, and an imaging device. The device could also be used as a shift register. The essence of the design was the ability to transfer charge along the surface of a semiconductor from one storage capacitor to the next. The first experimental device demonstrating the principle was a row of closely spaced metal squares on an oxidized silicon surface electrically accessed by wire bonds. It was demonstrated by Gil Amelio, Michael Francis Tompsett and George Smith in April 1970. This was the first experimental application of the CCD in image sensor technology, and used a depleted MOS structure as the photodetector. The first patent (U.S. patent 4,085,456) on the application of CCDs to imaging was assigned to Tompsett, who filed the application in 1971. The first working CCD made with integrated circuit technology was a simple 8-bit shift register, reported by Tompsett, Amelio and Smith in August 1970. This device had input and output circuits and was used to demonstrate its use as a shift register and as a crude eight pixel linear imaging device. Development of the device progressed at a rapid rate. By 1971, Bell researchers led by Michael Tompsett were able to capture images with simple linear devices. Several companies, including Fairchild Semiconductor, RCA and Texas Instruments, picked up on the invention and began development programs. Fairchild's effort, led by ex-Bell researcher Gil Amelio, was the first with commercial devices, and by 1974 had a linear 500-element device and a 2D 100 × 100 pixel device. Peter L. P. Dillon, a scientist at Kodak Research Labs, invented the first color CCD image sensor by overlaying a color filter array on this Fairchild 100 x 100 pixel Interline CCD starting in 1974. Steven Sasson, an electrical engineer working for the Kodak Apparatus Division, invented a digital still camera using this same Fairchild 100 × 100 CCD in 1975. The interline transfer (ILT) CCD device was proposed by L. Walsh and R. Dyck at Fairchild in 1973 to reduce smear and eliminate a mechanical shutter. To further reduce smear from bright light sources, the frame-interline-transfer (FIT) CCD architecture was developed by K. Horii, T. Kuroda and T. Kunii at Matsushita (now Panasonic) in 1981. The first KH-11 KENNEN reconnaissance satellite equipped with charge-coupled device array (800 × 800 pixels) technology for imaging was launched in December 1976. Under the leadership of Kazuo Iwama, Sony started a large development effort on CCDs involving a significant investment. Eventually, Sony managed to mass-produce CCDs for their camcorders. Before this happened, Iwama died in August 1982. Subsequently, a CCD chip was placed on his tombstone to acknowledge his contribution. The first mass-produced consumer CCD video camera, the CCD-G5, was released by Sony in 1983, based on a prototype developed by Yoshiaki Hagiwara in 1981. Early CCD sensors suffered from shutter lag. This was largely resolved with the invention of the pinned photodiode (PPD). It was invented by Nobukazu Teranishi, Hiromitsu Shiraki and Yasuo Ishihara at NEC in 1980. They recognized that lag can be eliminated if the signal carriers could be transferred from the photodiode to the CCD. This led to their invention of the pinned photodiode, a photodetector structure with low lag, low noise, high quantum efficiency and low dark current. It was first publicly reported by Teranishi and Ishihara with A. Kohono, E. Oda and K. Arai in 1982, with the addition of an anti-blooming structure. The new photodetector structure invented at NEC was given the name "pinned photodiode" (PPD) by B.C. Burkey at Kodak in 1984. In 1987, the PPD began to be incorporated into most CCD devices, becoming a fixture in consumer electronic video cameras and then digital still cameras. Since then, the PPD has been used in nearly all CCD sensors and then CMOS sensors. In January 2006, Boyle and Smith were awarded the National Academy of Engineering Charles Stark Draper Prize, and in 2009 they were awarded the Nobel Prize for Physics for their invention of the CCD concept. Michael Tompsett was awarded the 2010 National Medal of Technology and Innovation, for pioneering work and electronic technologies including the design and development of the first CCD imagers. He was also awarded the 2012 IEEE Edison Medal for "pioneering contributions to imaging devices including CCD Imagers, cameras and thermal imagers". == Basics of operation == In a CCD for capturing images, there is a photoactive region (an epitaxial layer of silicon), and a transmission region made out of a shift register (the CCD, properly speaking). An image is projected through a lens onto the capacitor array (the photoactive region), causing each capacitor to accumulate an electric charge proportional to the light intensity at that location. A one-dimensional array, used in line-scan cameras, captures a single slice of the image, whereas a two-dimensional array, used in video and still cameras, captures a two-dimensional picture corresponding to the scene projected onto the focal plane of the sensor. Once the array has been exposed to the image, a control circuit causes each capacitor to transfer its contents to its neighbor (operating as a shift register). The last capacitor in the array dumps its charge into a charge amplifier, which converts the charge into a voltage. By repeating this process, the controlling circuit converts the entire contents of the array in the semiconductor to a sequence of voltages. In a digital device, these voltages are then sampled, digitized, and usually stored in memory; in an analog device (such as an analog video camera), they are processed into a continuous analog signal (e.g. by feeding the output of the charge amplifier into a low-pass filter), which is then processed and fed out to other circuits for transmission, recording, or other processing. == Detailed physics of operation == === Charge generation === Before the MOS capacitors are exposed to light, they are biased into the depletion region; in n-channel CCDs, the silicon under the bias gate is slightly p-doped or intrinsic. The gate is then biased at a positive potential, above the threshold for strong inversion, which will eventually result in the creation of an n channel below the gate as in a MOSFET. However, it takes time to reach this thermal equilibrium: up to hours in high-end scientific cameras cooled at low temperature. Initially after biasing, the holes are pushed far into the substrate, and no mobile electrons are at or near the surface; the CCD thus operates in a non-equilibrium state called deep depletion. Then, when electron–hole pairs are generated in the depletion region, they are separated by the electric field, the elec
Read more →
Empirical dynamic modeling

Empirical dynamic modeling (EDM) is a framework for analysis and prediction of nonlinear dynamical systems. Applications include population dynamics, ecosystem service, medicine, neuroscience, dynamical systems, geophysics, and human-computer interaction. EDM was originally developed by Robert May and George Sugihara. It can be considered a methodology for data modeling, predictive analytics, dynamical system analysis, machine learning and time series analysis. == Description == Mathematical models have tremendous power to describe observations of real-world systems. They are routinely used to test hypothesis, explain mechanisms and predict future outcomes. However, real-world systems are often nonlinear and multidimensional, in some instances rendering explicit equation-based modeling problematic. Empirical models, which infer patterns and associations from the data instead of using hypothesized equations, represent a natural and flexible framework for modeling complex dynamics. Donald DeAngelis and Simeon Yurek illustrated that canonical statistical models are ill-posed when applied to nonlinear dynamical systems. A hallmark of nonlinear dynamics is state-dependence: system states are related to previous states governing transition from one state to another. EDM operates in this space, the multidimensional state-space of system dynamics rather than on one-dimensional observational time series. EDM does not presume relationships among states, for example, a functional dependence, but projects future states from localised, neighboring states. EDM is thus a state-space, nearest-neighbors paradigm where system dynamics are inferred from states derived from observational time series. This provides a model-free representation of the system naturally encompassing nonlinear dynamics. A cornerstone of EDM is recognition that time series observed from a dynamical system can be transformed into higher-dimensional state-spaces by time-delay embedding with Takens's theorem. The state-space models are evaluated based on in-sample fidelity to observations, conventionally with Pearson correlation between predictions and observations. == Methods == Primary EDM algorithms include Simplex projection, Sequential locally weighted global linear maps (S-Map) projection, Multivariate embedding in Simplex or S-Map, Convergent cross mapping (CCM), and Multiview Embeding, described below. Nearest neighbors are found according to: NN ( y , X , k ) = ‖ X N i E − y ‖ ≤ ‖ X N j E − y ‖ if 1 ≤ i ≤ j ≤ k {\displaystyle {\text{NN}}(y,X,k)=\|X_{N_{i}}^{E}-y\|\leq \|X_{N_{j}}^{E}-y\|{\text{ if }}1\leq i\leq j\leq k} === Simplex === Simplex projection is a nearest neighbor projection. It locates the k {\displaystyle k} nearest neighbors to the location in the state-space from which a prediction is desired. To minimize the number of free parameters k {\displaystyle k} is typically set to E + 1 {\displaystyle E+1} defining an E + 1 {\displaystyle E+1} dimensional simplex in the state-space. The prediction is computed as the average of the weighted phase-space simplex projected T p {\displaystyle Tp} points ahead. Each neighbor is weighted proportional to their distance to the projection origin vector in the state-space. Find k {\displaystyle k} nearest neighbor: N k ← NN ( y , X , k ) {\displaystyle N_{k}\gets {\text{NN}}(y,X,k)} Define the distance scale: d ← ‖ X N 1 E − y ‖ {\displaystyle d\gets \|X_{N_{1}}^{E}-y\|} Compute weights: For{ i = 1 , … , k {\displaystyle i=1,\dots ,k} } : w i ← exp ⁡ ( − ‖ X N i E − y ‖ / d ) {\displaystyle w_{i}\gets \exp(-\|X_{N_{i}}^{E}-y\|/d)} Average of state-space simplex: y ^ ← ∑ i = 1 k ( w i X N i + T p ) / ∑ i = 1 k w i {\displaystyle {\hat {y}}\gets \sum _{i=1}^{k}\left(w_{i}X_{N_{i}+T_{p}}\right)/\sum _{i=1}^{k}w_{i}} === S-Map === S-Map extends the state-space prediction in Simplex from an average of the E + 1 {\displaystyle E+1} nearest neighbors to a linear regression fit to all neighbors, but localised with an exponential decay kernel. The exponential localisation function is F ( θ ) = exp ( − θ d / D ) {\displaystyle F(\theta )={\text{exp}}(-\theta d/D)} , where d {\displaystyle d} is the neighbor distance and D {\displaystyle D} the mean distance. In this way, depending on the value of θ {\displaystyle \theta } , neighbors close to the prediction origin point have a higher weight than those further from it, such that a local linear approximation to the nonlinear system is reasonable. This localisation ability allows one to identify an optimal local scale, in-effect quantifying the degree of state dependence, and hence nonlinearity of the system. Another feature of S-Map is that for a properly fit model, the regression coefficients between variables have been shown to approximate the gradient (directional derivative) of variables along the manifold. These Jacobians represent the time-varying interaction strengths between system variables. Find k {\displaystyle k} nearest neighbor: N ← NN ( y , X , k ) {\displaystyle N\gets {\text{NN}}(y,X,k)} Sum of distances: D ← 1 k ∑ i = 1 k ‖ X N i E − y ‖ {\displaystyle D\gets {\frac {1}{k}}\sum _{i=1}^{k}\|X_{N_{i}}^{E}-y\|} Compute weights: For{ i = 1 , … , k {\displaystyle i=1,\dots ,k} } : w i ← exp ⁡ ( − θ ‖ X N i E − y ‖ / D ) {\displaystyle w_{i}\gets \exp(-\theta \|X_{N_{i}}^{E}-y\|/D)} Reweighting matrix: W ← diag ( w i ) {\displaystyle W\gets {\text{diag}}(w_{i})} Design matrix: A ← [ 1 X N 1 X N 1 − 1 … X N 1 − E + 1 1 X N 2 X N 2 − 1 … X N 2 − E + 1 ⋮ ⋮ ⋮ ⋱ ⋮ 1 X N k X N k − 1 … X N k − E + 1 ] {\displaystyle A\gets {\begin{bmatrix}1&X_{N_{1}}&X_{N_{1}-1}&\dots &X_{N_{1}-E+1}\\1&X_{N_{2}}&X_{N_{2}-1}&\dots &X_{N_{2}-E+1}\\\vdots &\vdots &\vdots &\ddots &\vdots \\1&X_{N_{k}}&X_{N_{k}-1}&\dots &X_{N_{k}-E+1}\end{bmatrix}}} Weighted design matrix: A ← W A {\displaystyle A\gets WA} Response vector at T p {\displaystyle Tp} : b ← [ X N 1 + T p X N 2 + T p ⋮ X N k + T p ] {\displaystyle b\gets {\begin{bmatrix}X_{N_{1}+T_{p}}\\X_{N_{2}+T_{p}}\\\vdots \\X_{N_{k}+T_{p}}\end{bmatrix}}} Weighted response vector: b ← W b {\displaystyle b\gets Wb} Least squares solution (SVD): c ^ ← argmin c ‖ A c − b ‖ 2 2 {\displaystyle {\hat {c}}\gets {\text{argmin}}_{c}\|Ac-b\|_{2}^{2}} Local linear model c ^ {\displaystyle {\hat {c}}} is prediction: y ^ ← c ^ 0 + ∑ i = 1 E c ^ i y i {\displaystyle {\hat {y}}\gets {\hat {c}}_{0}+\sum _{i=1}^{E}{\hat {c}}_{i}y_{i}} === Multivariate Embedding === Multivariate Embedding recognizes that time-delay embeddings are not the only valid state-space construction. In Simplex and S-Map one can generate a state-space from observational vectors, or time-delay embeddings of a single observational time series, or both. === Convergent Cross Mapping === Convergent cross mapping (CCM) leverages a corollary to the Generalized Takens Theorem that it should be possible to cross predict or cross map between variables observed from the same system. Suppose that in some dynamical system involving variables X {\displaystyle X} and Y {\displaystyle Y} , X {\displaystyle X} causes Y {\displaystyle Y} . Since X {\displaystyle X} and Y {\displaystyle Y} belong to the same dynamical system, their reconstructions (via embeddings) M x {\displaystyle M_{x}} , and M y {\displaystyle M_{y}} , also map to the same system. The causal variable X {\displaystyle X} leaves a signature on the affected variable Y {\displaystyle Y} , and consequently, the reconstructed states based on Y {\displaystyle Y} can be used to cross predict values of X {\displaystyle X} . CCM leverages this property to infer causality by predicting X {\displaystyle X} using the M y {\displaystyle M_{y}} library of points (or vice versa for the other direction of causality), while assessing improvements in cross map predictability as larger and larger random samplings of M y {\displaystyle M_{y}} are used. If the prediction skill of X {\displaystyle X} increases and saturates as the entire M y {\displaystyle M_{y}} is used, this provides evidence that X {\displaystyle X} is casually influencing Y {\displaystyle Y} . === Multiview Embedding === Multiview Embedding is a Dimensionality reduction technique where a large number of state-space time series vectors are combitorially assessed towards maximal model predictability. == Extensions == Extensions to EDM techniques include: Generalized Theorems for Nonlinear State Space Reconstruction Extended Convergent Cross Mapping Dynamic stability S-Map regularization Visual analytics with EDM Convergent Cross Sorting Expert system with EDM hybrid Sliding windows based on the extended convergent cross-mapping Empirical Mode Modeling Accounting for missing data and variable step sizes Accounting for observation noise Hierarchical Bayesian EDM via Gaussian processes Intelligent and Adaptive Control Optimal control via Empirical dynamic programming Multiview distance regularised S-map
Read more →
InstallCore

InstallCore (stylized as installCore) was an installation and content distribution platform created by ironSource, considered potentially unwanted programs (PUP) by a number of anti-malware vendors. It included a software development kit (SDK) for Windows and Mac OS X. The program allowed those using it for distribution to include monetization by advertisements or charging for installation, and made its installations invisible to the user and its anti-virus software. The platform and its programs have been rated potentially unwanted programs (PUP) or potentially unwanted applications (PUA) by anti-malware product vendors since 2014, and by Windows Defender Antivirus since 2015. The platform was primarily designed for efficient web-based deployment of various types of application software. As of August 2012, InstallCore was managing 100 million installations every month, offering services for paid, unpaid, and free software by using the SDK version. == History == The InstallCore team introduced the first version of the SDK at the beginning of 2011. The SDK was a fork of the FoxTab installer and had only basic Installation features. InstallCore was discontinued as part of a company flotation in late 2020. == Criticism and malware classification == InstallCore and its software packages have been classified as potentially unwanted programs (PUP) or potentially unwanted applications (PUA), by anti-malware product vendors and Windows Defender Antivirus from 2014–2015 onwards, with many stating that it installs adware and other additional PUPs. Malwarebytes identified the program as "a family of bundlers that installs more than one application on the user's computer". It has been described as "crossing the line into full-blown malware" and a "nasty Trojan".
Read more →
Autoscaling

Autoscaling, (also written as auto scaling, auto-scaling, or known as automatic scaling), is a method used in cloud computing that dynamically adjusts the amount of computational resources in a server farm - typically measured by the number of active servers - automatically based on the load on the farm. For example, the number of servers running behind a web application may be increased or decreased automatically based on the number of active users on the site. Since such metrics may change dramatically throughout the course of the day, and servers are a limited resource that cost money to run even while idle, there is often an incentive to run "just enough" servers to support the current load while still being able to support sudden and large spikes in activity. Autoscaling is helpful for such needs, as it can reduce the number of active servers when activity is low, and launch new servers when activity is high. Autoscaling is closely related to, and builds upon, the idea of load balancing. == Advantages == Autoscaling offers the following advantages: For companies running their own web server infrastructure, autoscaling typically means allowing some servers to go to sleep during times of low load, saving on electricity costs (as well as water costs if water is being used to cool the machines). For companies using infrastructure hosted in the cloud, autoscaling can mean lower bills, because most cloud providers charge based on total usage rather than maximum capacity. Even for companies that cannot reduce the total compute capacity they run or pay for at any given time, autoscaling can help by allowing the company to run less time-sensitive workloads on machines that get freed up by autoscaling during times of low traffic. Autoscaling solutions, such as the one offered by Amazon Web Services, can also take care of replacing unhealthy instances and therefore protecting somewhat against hardware, network, and application failures. Autoscaling can offer greater uptime and more availability in cases where production workloads are variable and unpredictable. Autoscaling differs from having a fixed daily, weekly, or yearly cycle of server use in that it is responsive to actual usage patterns, and thus reduces the potential downside of having too few or too many servers for the traffic load. For instance, if traffic is usually lower at midnight, then a static scaling solution might schedule some servers to sleep at night, but this might result in downtime on a night where people happen to use the Internet more (for instance, due to a viral news event). Autoscaling, on the other hand, can handle unexpected traffic spikes better. == Terminology == In the list below, we use the terminology used by Amazon Web Services (AWS). However, alternative names are noted and terminology that is specific to the names of Amazon services is not used for the names. == Practice == === Amazon Web Services (AWS) === Amazon Web Services launched the Amazon Elastic Compute Cloud (EC2) service in August 2006, that allowed developers to programmatically create and terminate instances (machines). At the time of initial launch, AWS did not offer autoscaling, but the ability to programmatically create and terminate instances gave developers the flexibility to write their own code for autoscaling. Third-party autoscaling software for AWS began appearing around April 2008. These included tools by Scalr and RightScale. RightScale was used by Animoto, which was able to handle Facebook traffic by adopting autoscaling. On May 18, 2009, Amazon launched its own autoscaling feature along with Elastic Load Balancing, as part of Amazon Elastic Compute Cloud. Autoscaling is now an integral component of Amazon's EC2 offering. Autoscaling on Amazon Web Services is done through a web browser or the command line tool. In May 2016 Autoscaling was also offered in AWS ECS Service. On-demand video provider Netflix documented their use of autoscaling with Amazon Web Services to meet their highly variable consumer needs. They found that aggressive scaling up and delayed and cautious scaling down served their goals of uptime and responsiveness best. In an article for TechCrunch, Zev Laderman, the co-founder and CEO of Newvem, a service that helps optimize AWS cloud infrastructure, recommended that startups use autoscaling in order to keep their Amazon Web Services costs low. Various best practice guides for AWS use suggest using its autoscaling feature even in cases where the load is not variable. That is because autoscaling offers two other advantages: automatic replacement of any instances that become unhealthy for any reason (such as hardware failure, network failure, or application error), and automatic replacement of spot instances that get interrupted for price or capacity reasons, making it more feasible to use spot instances for production purposes. Netflix's internal best practices require every instance to be in an autoscaling group, and its conformity monkey terminates any instance not in an autoscaling group in order to enforce this best practice. === Microsoft's Windows Azure === On June 27, 2013, Microsoft announced that it was adding autoscaling support to its Windows Azure cloud computing platform. Documentation for the feature is available on the Microsoft Developer Network. === Oracle Cloud === Oracle Cloud Platform allows server instances to automatically scale a cluster in or out by defining an auto-scaling rule. These rules are based on CPU and/or memory utilization and determine when to add or remove nodes. === Google Cloud Platform === On November 17, 2014, the Google Compute Engine announced a public beta of its autoscaling feature for use in Google Cloud Platform applications. As of March 2015, the autoscaling tool is still in Beta. === Facebook === In a blog post in August 2014, a Facebook engineer disclosed that the company had started using autoscaling to bring down its energy costs. The blog post reported a 27% decline in energy use for low traffic hours (around midnight) and a 10-15% decline in energy use over the typical 24-hour cycle. === Kubernetes Horizontal Pod Autoscaler === Kubernetes Horizontal Pod Autoscaler automatically scales the number of pods in a replication controller, deployment or replicaset based on observed CPU utilization (or, with beta support, on some other, application-provided metrics) == Alternative autoscaling decision approaches == Autoscaling by default uses reactive decision approach for dealing with traffic scaling: scaling only happens in response to real-time changes in metrics. In some cases, particularly when the changes occur very quickly, this reactive approach to scaling is insufficient. Two other kinds of autoscaling decision approaches are described below. === Scheduled autoscaling approach === This is an approach to autoscaling where changes are made to the minimum size, maximum size, or desired capacity of the autoscaling group at specific times of day. Scheduled scaling is useful, for instance, if there is a known traffic load increase or decrease at specific times of the day, but the change is too sudden for reactive approach based autoscaling to respond fast enough. AWS autoscaling groups support scheduled scaling. === Predictive autoscaling === This approach to autoscaling uses predictive analytics. The idea is to combine recent usage trends with historical usage data as well as other kinds of data to predict usage in the future, and autoscale based on these predictions. For parts of their infrastructure and specific workloads, Netflix found that Scryer, their predictive analytics engine, gave better results than Amazon's reactive autoscaling approach. In particular, it was better for: Identifying huge spikes in demand in the near future and getting capacity ready a little in advance Dealing with large-scale outages, such as failure of entire availability zones and regions Dealing with variable traffic patterns, providing more flexibility on the rate of scaling out or in based on the typical level and rate of change in demand at various times of day On November 20, 2018, AWS announced that predictive scaling would be available as part of its autoscaling offering.
Read more →
YNAB

You Need a Budget (YNAB) (pronounced ) is an online personal budgeting program based on the envelope system developed by a privately owned American company of the same name. It is available via any web browser or a mobile app. == History == The program was initially developed as standalone software in 2004 by Jesse Mecham, while he was in college pursuing his master's degree in accounting, after he and his wife faced financial difficulty and decided to improve their budgeting. It evolved from a spreadsheet that he created for the budgeting process. The acronym stands for "you need a budget." In 2015 they changed their licensing model to software as a service. In 2020, YNAB had 115 employees, all working remotely. == Overview == The service encourages users to follow four principles or "rules": Give every dollar a job: Each dollar in a budget is allocated to a specific purpose. This concept is also called zero-based budgeting. Embrace true expenses: All expenses are planned for, so that there are no surprises. Roll with the punches: Being flexible when there is overspending. Age your money: Keeping money in your budget without immediately spending it. Users can either import transactions automatically from their financial institutions or input them manually. The software also displays financial reports to keep users informed about their finances at a glance. == Awards and recognition == YNAB has been named one of the best budgeting apps by U.S. News & World Report, Kiplinger's Personal Finance, CNN, HuffPost, CNBC, and hundreds of other financial reporting outlets. The Wall Street Journal – Best budgeting app for hands-on budgeters. Forbes – Best Budgeting Apps Money – Best budgeting app for college students. Lifehacker – Most popular personal finance software. Wirecutter – "Great pick for hard-core budgeters". Investopedia – Best overall budgeting app.
Read more →
AI safety

AI safety is an interdisciplinary field focused on preventing accidents, misuse, or other harmful consequences arising from artificial intelligence systems. It encompasses AI alignment (which aims to ensure AI systems behave as intended), monitoring AI systems for risks, and enhancing their robustness. The field is particularly concerned with existential risks posed by advanced AI models. Beyond technical research, AI safety involves developing norms and policies that promote safety, including advocacy for regulations at different levels of government. The field gained significant popularity in 2023, with rapid progress in generative AI and public concerns voiced by researchers and CEOs about potential dangers. During the 2023 AI Safety Summit, the United States and the United Kingdom both established their own AI Safety Institute. However, researchers have expressed concern that AI safety measures are not keeping pace with the rapid development of AI capabilities. == Motivations == Scholars discuss current risks from critical systems failures, bias, and AI-enabled surveillance, as well as emerging risks like technological unemployment, digital manipulation, weaponization, AI-enabled cyberattacks and bioterrorism. They also discuss speculative risks from losing control of future artificial general intelligence (AGI) agents, or from AI enabling perpetually stable dictatorships. === Existential safety === Some have criticized concerns about AGI, such as Andrew Ng who compared them in 2015 to "worrying about overpopulation on Mars when we have not even set foot on the planet yet". Stuart J. Russell on the other side urges caution, arguing that "it is better to anticipate human ingenuity than to underestimate it". AI researchers have widely differing opinions about the severity and primary sources of risk posed by AI technology – though surveys suggest that experts take high consequence risks seriously. In two surveys of AI researchers, the median respondent was optimistic about AI overall, but placed a 5% probability on an "extremely bad (e.g. human extinction)" outcome of advanced AI. In a 2022 survey of the natural language processing community, 37% agreed or weakly agreed that it is plausible that AI decisions could lead to a catastrophe that is "at least as bad as an all-out nuclear war". == History == Risks from AI began to be seriously discussed at the start of the computer age: Moreover, if we move in the direction of making machines which learn and whose behavior is modified by experience, we must face the fact that every degree of independence we give the machine is a degree of possible defiance of our wishes. In 1988 Blay Whitby published a book outlining the need for AI to be developed along ethical and socially responsible lines. From 2008 to 2009, the Association for the Advancement of Artificial Intelligence (AAAI) commissioned a study to explore and address potential long-term societal influences of AI research and development. The panel was generally skeptical of the radical views expressed by science-fiction authors but agreed that "additional research would be valuable on methods for understanding and verifying the range of behaviors of complex computational systems to minimize unexpected outcomes". In 2011, Roman Yampolskiy introduced the term "AI safety engineering" at the Philosophy and Theory of Artificial Intelligence conference, listing prior failures of AI systems and arguing that "the frequency and seriousness of such events will steadily increase as AIs become more capable". In 2014, philosopher Nick Bostrom published the book Superintelligence: Paths, Dangers, Strategies. He has the opinion that the rise of AGI has the potential to create various societal issues, ranging from the displacement of the workforce by AI, manipulation of political and military structures, to even the possibility of human extinction. His argument that future advanced systems may pose a threat to human existence prompted Elon Musk, Bill Gates, and Stephen Hawking to voice similar concerns. In 2015, dozens of artificial intelligence experts signed an open letter on artificial intelligence calling for research on the societal impacts of AI and outlining concrete directions. To date, the letter has been signed by over 8000 people including Yann LeCun, Shane Legg, Yoshua Bengio, and Stuart Russell. In the same year, a group of academics led by professor Stuart J. Russell founded the Center for Human-Compatible AI at the University of California Berkeley and the Future of Life Institute awarded $6.5 million in grants for research aimed at "ensuring artificial intelligence (AI) remains safe, ethical and beneficial". In 2016, the White House Office of Science and Technology Policy and Carnegie Mellon University announced The Public Workshop on Safety and Control for Artificial Intelligence, which was one of a sequence of four White House workshops aimed at investigating "the advantages and drawbacks" of AI. In the same year, Concrete Problems in AI Safety – one of the first and most influential technical AI Safety agendas – was published. In 2017, the Future of Life Institute sponsored the Asilomar Conference on Beneficial AI, where more than 100 thought leaders formulated principles for beneficial AI including "Race Avoidance: Teams developing AI systems should actively cooperate to avoid corner-cutting on safety standards". In 2018, the DeepMind Safety team outlined AI safety problems in specification, robustness, and assurance. The following year, researchers organized a workshop at ICLR that focused on these problem areas. In 2021, Unsolved Problems in ML Safety was published, outlining research directions in robustness, monitoring, alignment, and systemic safety. In 2023, Rishi Sunak said he wants the United Kingdom to be the "geographical home of global AI safety regulation" and to host the first global summit on AI safety. The AI safety summit took place in November 2023, and focused on the risks of misuse and loss of control associated with frontier AI models. During the summit the intention to create the International Scientific Report on the Safety of Advanced AI was announced. In 2024, The US and UK forged a new partnership on the science of AI safety. The MoU was signed on 1 April 2024 by US commerce secretary Gina Raimondo and UK technology secretary Michelle Donelan to jointly develop advanced AI model testing, following commitments announced at an AI Safety Summit in Bletchley Park in November. In 2025, an international team of 96 experts chaired by Yoshua Bengio published the first International AI Safety Report. The report, commissioned by 30 nations and the United Nations, represents the first global scientific review of potential risks associated with advanced artificial intelligence. It details potential threats stemming from misuse, malfunction, and societal disruption, with the objective of informing policy through evidence-based findings, without providing specific recommendations. == Research focus == AI safety research areas include robustness, monitoring, and alignment. === Robustness === ==== Adversarial robustness ==== AI systems are often vulnerable to adversarial examples or "inputs to machine learning (ML) models that an attacker has intentionally designed to cause the model to make a mistake". For example, in 2013, Szegedy et al. discovered that adding specific imperceptible perturbations to an image could cause it to be misclassified with high confidence. This continues to be an issue with neural networks, though in recent work the perturbations are generally large enough to be perceptible. The image on the right is predicted to be an ostrich after the perturbation is applied. (Left) is a correctly predicted sample, (center) perturbation applied magnified by 10x, (right) adversarial example. Adversarial robustness is often associated with security. Researchers demonstrated that an audio signal could be imperceptibly modified so that speech-to-text systems transcribe it to any message the attacker chooses. Network intrusion and malware detection systems also must be adversarially robust since attackers may design their attacks to fool detectors. Models that represent objectives (reward models) must also be adversarially robust. For example, a reward model might estimate how helpful a text response is and a language model might be trained to maximize this score. Researchers have shown that if a language model is trained for long enough, it will leverage the vulnerabilities of the reward model to achieve a better score and perform worse on the intended task. This issue can be addressed by improving the adversarial robustness of the reward model. More generally, any AI system used to evaluate another AI system must be adversarially robust. This could include monitoring tools, since they could also potentially be tampered with to produce a higher reward. Large language models (LLMs) can be vulnerable to prom
Read more →
Circle Hough Transform

The circle Hough Transform (CHT) is a basic feature extraction technique used in digital image processing for detecting circles in imperfect images. The circle candidates are produced by “voting” in the Hough parameter space and then selecting local maxima in an accumulator matrix. It is a specialization of the Hough transform. == Theory == In a two-dimensional space, a circle can be described by: ( x − a ) 2 + ( y − b ) 2 = r 2 ( 1 ) {\displaystyle \left(x-a\right)^{2}+\left(y-b\right)^{2}=r^{2}\ \ \ \ \ (1)} where (a,b) is the center of the circle, and r is the radius. If a 2D point (x,y) is fixed, then the parameters can be found according to (1). The parameter space would be three dimensional, (a, b, r). And all the parameters that satisfy (x, y) would lie on the surface of an inverted right-angled cone whose apex is at (x, y, 0). In the 3D space, the circle parameters can be identified by the intersection of many conic surfaces that are defined by points on the 2D circle. This process can be divided into two stages. The first stage is fixing radius then find the optimal center of circles in a 2D parameter space. The second stage is to find the optimal radius in a one dimensional parameter space. === Find parameters with known radius R === If the radius is fixed, then the parameter space would be reduced to 2D (the position of the circle center). For each point (x, y) on the original circle, it can define a circle centered at (x, y) with radius R according to (1). The intersection point of all such circles in the parameter space would be corresponding to the center point of the original circle. Consider 4 points on a circle in the original image (left). The circle Hough transform is shown in the right. Note that the radius is assumed to be known. For each (x,y) of the four points (white points) in the original image, it can define a circle in the Hough parameter space centered at (x, y) with radius r. An accumulator matrix is used for tracking the intersection point. In the parameter space, the voting number of those points that have a newly defined circle passing through them would be increased by one for every circle. Then the local maxima point (the red point in the center in the right figure) can be found. The position (a, b) of the maxima would be the center of the original circle. === Multiple circles with known radius R === Multiple circles with same radius can be found with the same technique. Note that, in the accumulator matrix (right fig), there would be at least 3 local maxima points. === Accumulator matrix and voting === In practice, an accumulator matrix is introduced to find the intersection point in the parameter space. First, we need to divide the parameter space into “buckets” using a grid and produce an accumulator matrix according to the grid. The element in the accumulator matrix denotes the number of “circles” in the parameter space that are passing through the corresponding grid cell in the parameter space. The number is also called “voting number”. Initially, every element in the matrix is zeros. Then for each “edge” point in the original space, we can formulate a circle in the parameter space and increase the voting number of the grid cell which the circle passes through. This process is called “voting”. After voting, we can find local maxima in the accumulator matrix. The positions of the local maxima are corresponding to the circle centers in the original space. === Find circle parameter with unknown radius === Since the parameter space is 3D, the accumulator matrix would be 3D, too. We can iterate through possible radii; for each radius, we use the previous technique. Finally, find the local maxima in the 3D accumulator matrix. Accumulator array should be A[x,y,r] in the 3D space. Voting should be for each pixels, radius and theta A[x,y,r] += 1 The algorithm : For each A[a,b,r] = 0; Process the filtering algorithm on image Gaussian Blurring, convert the image to grayscale ( grayScaling), make Canny operator, The Canny operator gives the edges on image. Vote on all possible circles in accumulator. The local maximum voted circles of Accumulator A gives the circle Hough space. The maximum voted circle of Accumulator gives the circle. The Incrementing for Best Candidate : For each A[a,b,r] = 0; // fill with zeroes initially, instantiate 3D matrix For each cell(x,y) For each theta t = 0 to 360 // the possible theta 0 to 360 b = y – r sin(t PI / 180); //polar coordinate for center (convert to radians) a = x – r cos(t PI / 180); //polar coordinate for center (convert to radians) A[a,b,r] +=1; //voting end end == Examples == === Find circles in a shoe-print === The original picture (right) is first turned into a binary image (left) using a threshold and Gaussian filter. Then edges (mid) are found from it using canny edge detection. After this, all the edge points are used by the Circle Hough Transform to find underlying circle structure. == Limitations == Since the parameter space of the CHT is three dimensional, it may require lots of storage and computation. Choosing a bigger grid size can ameliorate this problem. However, choosing an appropriate grid size is difficult. Since too coarse a grid can lead to large values of the vote being obtained falsely because many quite different structures correspond to a single bucket. Too fine a grid can lead to structures not being found because votes resulting from tokens that are not exactly aligned end up in different buckets, and no bucket has a large vote. Also, the CHT is not very robust to noise. == Extensions == === Adaptive Hough Transform === J. Illingworth and J. Kittler introduced this method for implementing Hough Transform efficiently. The AHT uses a small accumulator array and the idea of a flexible iterative "coarse to fine" accumulation and search strategy to identify significant peaks in the Hough parameter spaces. This method is substantially superior to the standard Hough Transform implementation in both storage and computational requirements. == Application == === People Counting === Since the head would be similar to a circle in an image, CHT can be used for detecting heads in a picture, so as to count the number of persons in the image. === Brain Aneurysm Detection === Modified Hough Circle Transform (MHCT) is used on the image extracted from Digital Subtraction Angiogram (DSA) to detect and classify aneurysms type. == Implementation code == Circle Detection via Standard Hough Transform, by Amin Sarafraz, Mathworks (File Exchange) Hough Circle Transform, OpenCV-Python Tutorials (archived version on archive.org)
Read more →
Supper (Spotify)

Supper is a web-based application on the Spotify digital music streaming platform. The Supper app was born from a group of friends who had backgrounds in the music and gastronomy industries. Digital music solutions company Artisan Council later executed it. The app now sits in the top 40 applications on Spotify. == About == The Supper Spotify application matches recipes for all occasions and skill levels with a playlist for both preparation and presentation, as envisioned by the chefs themselves. Supper is credited with being one of the first apps to pair music with food. Playing on the social nature of music and food culture, users can seamlessly experience both for the first time with real time music streaming. == Supper.mx == In May 2014 Supper was launched outside of the Spotify streaming platform. Though still in partnership with Spotify, supper.mx allows users to view Supper's music + food collaborations on mobile, tablet and desktop, without the need to download Spotify directly. == Curators == All of the recipes and playlists featured on the Supper app come straight from a growing network of tastemakers, including chefs, musicians and institutions around the world. Each month the recipes and playlists are updated in conjunction with current holidays, events and seasons. === Launch === Launching in October 2013 the first edition of Supper featured content from a range of eating institutions and culture makers from the US and Australia. Brooklyn Bowl (Brooklyn) Roberta's Pizza (Brooklyn) Fancy Hanks (Melbourne) The Foresters/Queenies Upstairs (Sydney) Hipstamatic Panama House (Bondi) Sweetwater Inn (Melbourne) Soul Clap (Syd record label) Yellow Birds (Melbourne) === November 2013 === Yardbird (Hong Kong) Sonoma Bakery (Sydney) Do or Dine (Brooklyn) Cameo Gallery (Brooklyn) Hypertrak (Blog) Blue Smoke (NYC) The Crepes of Wrath (Blog) Willin Low // Wild Rocket - Wild Oats - Relish === December 2013 === The Copper Mill (Sydney) Thug Kitchen Mamak (Sydney) Tutu's (Brooklyn) Chin Chin (Melbourne) Flat Iron Steak (London) Greasy Spoon (Copenhagen) === January 2014 === Mexicali Taco & Co. (LA) Church & State (LA) Salts Cure (LA) Nopa (SF) L & E Oyster (LA) 4100 bar (LA) Golden Gopher (LA) The Pie Hole (LA) State Bird Provisions (SF) === Momofuku === In February 2014 Supper teamed up with restaurant heavy weights Momofuku. The recipes featured came from their iconic New York, Toronto and Sydney restaurants. Head office also got involved with an instructional from Brand Director Sue Chan on how to paint Momofuku vibes on to any party. === SXSW === March sees the Supper team migrate to Austin, Texas for SXSW, bringing together the best eateries the city has to offer as well as the music that has influenced them. Restaurants and eateries on board in 2014 included: The Backspace Kelis Swifts Attic Uchi Jackalope Paul Qui/East Side King Thai Kun Wonderland Hole in the Wall Justine's Brasserie The Liberty === Kelis === In April 2014 Kelis presented 5 of her recipes paired with a personal playlist for Supper. Kelis shared her recipes for apple farro, jerk ribs, New York vanilla bean cheesecake and Jerk Ribs. The Kelis/Supper collaboration coincided with the release of Kelis' 2014 album titled 'Food'. === Roberta's Pizza === In May 2014 Bushwick's Roberta's Pizza was guest curator on the Supper app and website. Included in their selections were restaurants and bars from across New York including Bun-ker Vietnamese, Old Stanley's Bar, St. Anselm, Chuko, Frank's Cocktail Lounge, Junior's Cheesecake, Xi'an Famous Foods, Xe Lua, 124 Old Rabbit and Yuji Ramen.
Read more →
Rapid PHP Editor

rapid PHP Editor is a PHP Editor that incorporates many functions such as AutoComplete, Syntax checker, debugger and many other tools for fast PHP development. Rapid PHP Editor also contain other development tools for helping on HTML, CSS, JavaScript and many other languages. Is part of a family of products covering most aspects of modern web development integrating as well many other capabilities used by developers. Some features: (X)HTML to HTML5 CSS to CSS3 Code intelligence Powerful search and replace Support for several frameworks Code beautifier FTP Explorer (FTP/SFTP/FTPS) File explorer Database explorer Code snippets Validators and Debuggers FAST, real fast Many other tools available (many more to describe all here) == History == Rapid PHP Editor was built using the Delphi programming language.
Read more →
BioBIKE

BioBike(nee. BioLingua ) is a cloud-based, through-the-web programmable (Paas) symbolic biocomputing and bioinformatics platform that aims to make computational biology, and especially intelligent biocomputing (that is, the application of Artificial Intelligence to computational biology) accessible to research scientists who are not expert programmers. == Unique capabilities == BioBIKE is an integrated symbolic biocomputing and bioinformatics platform, built from the start as an entirely (what is now called) cloud-based architecture where all computing is done in remote servers, and all user access is accomplished through web browsers. BioBIKE has a built-in frame system in which all objects, data, and knowledge are represented. This enables code written either in the native Lisp, in the visual programming language, or systems of rules expressed in the SNARK theorem prover to access the whole of biological knowledge in an integrated manner. For its time (released in 2002) it was unique in permitting users to create fully functional biocomputing programs that run on the back-end servers entirely through the web browser UI. (In modern terms it was one of the first PaaS (Platform as a Service) systems, predating even Salesforce in this capability.) Initially this programming was carried out in raw Lisp, but Jeff Elhai's team at VCU, with NSF funding, created an entirely graphical programming environment on top of BioBIKE based upon the Boxer-style programming environments. Being a multi-headed, multi-threaded, multi-user, multi-tenancy cloud-based system, BioBIKE users were able to directly work together through their web browsers, remotely sharing the same listener and memory space. This permitted a unique sort of collaboration, discussed in Shrager (2007). A specialized offshoot of BioBIKE called "BioDeducta" includes SRI's SNARK theorem prover, offering unique "deductive biocomputing" capabilities. == Implementation == BioBIKE is open-source software implemented using the Lisp programming language. Continuing development takes place by the BioBIKE team centered at Virginia Commonwealth University . == History == BioBIKE was originally called "BioLingua", and was developed by Jeff Shrager at The Carnegie Inst. of Washington Dept. of Plant Biology, and JP Massar with funding from NASA's Astrobiology Division. Shrager and Massar wanted to create a web-based, multi-user Lisp Machine, specialized for bioinformatics. Other early contributors to the project included Mike Travers, and Jeff Elhai of VCU. Elhai obtained continuing funding from the National Science Foundation for the project, which was renamed BioBIKE. Elhai and colleagues added BioBIKE's unique visual programming language. Shrager, meanwhile, collaborated with Richard Waldinger at SRI to build SRI's (SNARK) theorem prover into BioBIKE, creating a deductive biocomputing system, called BioDeducta. == Instances == There used to be a number of BioBIKE verticals in different biological domains, including viral pathogens, cyanobacteria and other bacteria, Arabidopsis thaliana, and several others described in the references.
Read more →
Application Lifecycle Framework

The Application Lifecycle Framework (ALF) was a project by the Eclipse Foundation that aimed to create a standardized, open-source system to allow different application lifecycle management (ALM) tools to work together more easily. The goal was to provide common protocols and integration services that would let software development tools from different vendors communicate and share data. However, the project failed to gain sufficient support from major industry players and was terminated in 2008.
Read more →
WorkingPoint

WorkingPoint is a web-based application that provides a suite of small business management tools. It is designed to serve as a single point of access for various business operations, featuring a user-friendly interface. WorkingPoint's functionalities include double-entry bookkeeping, contact management, inventory management, invoicing, and bill and expense management. == Company == WorkingPoint, formerly Netbooks Inc, is a privately held corporation based in San Francisco, CA. The company is backed by CMEA Capital, also based in San Francisco. WorkingPoint has about ten employees and is led by CEO Tate Holt and Chairman Tom Proulx. Proulx is a co-founder of Intuit and an original author of that company’s Quicken personal finance software. The company was founded in 2007 under its original name Netbooks by co-creator Ridgely Evers. Evers set out to design a product that was more user-friendly than Intuit’s Quickbooks, which he also co-created. In mid-2009 the company officially rebranded itself and its flagship product “WorkingPoint”. The purpose of the re-branding was to disassociate the company from the product category of small laptops also known as netbooks. == Social Media Presence == WorkingPoint maintains a daily blog geared toward small business owners and managers. Each week the blog is updated with 3 WorkingPoint product feature or “how-to” posts, 2 subscriber company profiles, and 2 small business coaching posts. The company also maintains a Twitter page and a Facebook page. == Product Description (Free Version) == WorkingPoint allows businesses to invoice up to five customers (repeatedly) and provides account access for up to two individual users free of charge. Online Invoicing WorkingPoint allows users to create customized quotes and invoices online. The invoices can be used to bill customers via email or hardcopy post. WorkingPoint compiles the info from these invoices so users can track customer payments, inventory costs, shipping charges, accounts receivable and sales taxes. Users can also manage customer overpayments, provide customer loyalty discounts, and view a customer invoice history. Bill & Expense Management Users can track their bills and expenses by entering info into the WorkingPoint interface. WorkingPoint compiles this info so users can track categorized expenses, accounts paid, accounts payable, and vendor purchase history. The interface also allows users to add to their inventory while entering billing info. Double-Entry Bookeeping WorkingPoint automatically records entries under the double-entry bookkeeping system (also known as debits and credits) when the user completes invoicing and expense forms. Users can view transactions in general ledger format and perform closing entries if necessary. This functionality is designed for users who do not have an accounting background. Business Contact Management WorkingPoint provides an interface for users to manage their customer and vendor contact info. The software automatically tracks the user’s relationship with contacts, so users can track a contact’s sales and purchase history. Contacts can be imported and exported via numerous email clients including Microsoft Outlook, Yahoo! Mail, Google Gmail, and Mac Address Book. Inventory Management The software automatically adjusts inventory quantities after every purchase and sale. Users can track their current inventory quantity, average cost of inventory on-hand, cost of goods sold (COGS) and top-selling products. Users can also make manual adjustments to inventory when necessary. Financial Reporting Users can view a balance sheet, income statement, or cash flow statement pertaining to their business. The software automatically manages accruals to produce the balance sheet and income statement. Users can choose a data range from which to draw any of these reports. Financial reports can be converted to pdf format or exported (with formulas intact) to OpenOffice or Microsoft Excel. Cash Management WorkingPoint enables users to monitor cash balances on their bank accounts. The software automatically tracks cash inflows and outflows when users manage their accounts payable and accounts receivable. Business Dashboard The Business Dashboard visually and graphically displays key real-time business data. Users can customize the Dashboard to display data of their choosing. Online Company Profile Users can create an online company profile in order to have a presence on the Internet and as a basis for participation in WorkingPoint’s small business community features. Public profiles are featured in the WorkingPoint Company Directory and can be viewed externally using the URL format: https://businessname.workingpoint.com. == Product Description (Premium Version) == The premium version of WorkingPoint costs $10 per month. It includes all of the functionalities of the free version, allowing unlimited invoicing and account access. It also offers the following functions: 1099 Tax Reporting, invoice payment collection via PayPal, Email Marketing via VerticalResponse, and the Premium Reports & Accounting Package. 1099 Tax Reporting Users can identify qualifying companies and individuals for IRS Form 1099 or IRS Form 1096 reporting. WorkingPoint automatically tracks payments made to these companies and individuals. Users can then generate 1099 reports for distribution. Premium Reports & Accounting Package This includes: a Daily Operating Report providing users with sales and cash flow information, customizable accounts categorization, and cash flow statements using the indirect method of reporting. Invoice Payment Collection via PayPal Users can collect payment on their invoices via PayPal. Email Marketing via VerticalResponse The WorkingPoint premium package includes 500 email credits with the email marketing firm VerticalResponse.
Read more →