AI Art Modifier

AI Art Modifier — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Software design

Software design is the process of conceptualizing how a software system will work before it is implemented or modified. Software design also refers to the direct result of the design process – the concepts of how the software will work which may be formally documented or may be maintained less formally, including via oral tradition. The design process enables a designer to model aspects of a software system before it exists with the intent of making the effort of writing the code more efficiently. Creativity, past experience, a sense of what makes "good" software, and a commitment to quality are success factors for a competent design. A software design can be compared to an architected plan for a house. High-level plans represent the totality of the house (e.g., a three-dimensional rendering of the house). Lower-level plans provide guidance for constructing each detail (e.g., the plumbing lay). Similarly, the software design model provides a variety of views of the proposed software solution. == Part of the overall process == In terms of the waterfall development process, software design is the activity that occurs after requirements analysis and before coding. Requirements analysis determines what the system needs to do without determining how it will do it, and thus, multiple designs can be imagined that satisfy the requirements. The design can be created while coding, without a plan or requirements analysis, but for more complex projects this is less feasible. Completing a design prior to coding allows for multidisciplinary designers and subject-matter experts to collaborate with programmers to produce software that is useful and technically sound. Sometimes, a simulation or prototype is created to model the system in an effort to determine a valid and good design. == Code as design == A common point of confusion with the term design in software is that the process applies at multiple levels of abstraction such as a high-level software architecture and lower-level components, functions and algorithms. A relatively formal process may occur at high levels of abstraction but at lower levels, the design process is almost always less formal where the only artifact of design may be the code itself. To the extent that this is true, software design refers to the design of the design. Edsger W. Dijkstra referred to this layering of semantic levels as the "radical novelty" of computer programming, and Donald Knuth used his experience writing TeX to describe the futility of attempting to design a program prior to implementing it: TEX would have been a complete failure if I had merely specified it and not participated fully in its initial implementation. The process of implementation constantly led me to unanticipated questions and to new insights about how the original specifications could be improved. == Artifacts == A design process may include the production of art Software design documentation such as flow chart, use case, Pseudocode, Unified Modeling Language model and other Fundamental modeling concepts. For user centered software, design may involve user experience design yielding a storyboard to help determine those specifications. Documentation may be reviewed to allow constraints, specifications and even requirements to be adjusted prior to coding. == Iterative design == Software systems inherently deal with uncertainties, and the size of software components can significantly influence a system's outcomes, both positively and negatively. Neal Ford and Mark Richards propose an iterative approach to address the challenge of identifying and right-sizing components. This method emphasizes continuous refinement as teams develop a more nuanced understanding of system behavior and requirements. The approach typically involves a cycle with several stages: A high-level partitioning strategy is established, often categorized as technical or domain-based. Guidelines for the smallest meaningful deployable unit, referred to as "quanta," are defined. While these foundational decisions are made early, they may be revisited later in the cycle if necessary. Initial components are identified based on the established strategy. Requirements are assigned to the identified components. The roles and responsibilities of each component are analyzed to ensure clarity and minimize overlap. Architectural characteristics, such as scalability, fault tolerance, and maintainability, are evaluated. Components may be restructured based on feedback from development teams. This cycle serves as a general framework and can be adapted to different domains. == Design principles == Design principles enable a software engineer to navigate the design process. Davis suggested principles which have been refined over time as: The design process should not suffer from "tunnel vision" A good designer should consider alternative approaches, judging each based on the requirements of the problem, the resources available to do the job. The design should be traceable to the analysis model Because a single element of the design model can often be traced back to multiple requirements, it is necessary to have a means for tracking how requirements have been satisfied by the design model. The design should not reinvent the wheel Systems are constructed using a set of design patterns, many of which have likely been encountered before. These patterns should always be chosen as an alternative to reinvention. Time is short and resources are limited; design time should be invested in representing (truly new) ideas by integrating patterns that already exist (when applicable). The design should "minimize the intellectual distance" between the software and the problem as it exists in the real world That is, the structure of the software design should, whenever possible, mimic the structure of the problem domain. The design should exhibit uniformity and integration A design is uniform if it appears fully coherent. In order to achieve this outcome, rules of style and format should be defined for a design team before design work begins. A design is integrated if care is taken in defining interfaces between design components. The design should be structured to accommodate change The design concepts discussed in the next section enable a design to achieve this principle. The design should be structured to degrade gently, even when aberrant data, events, or operating conditions are encountered Well-designed software should never "bomb"; it should be designed to accommodate unusual circumstances, and if it must terminate processing, it should do so in a graceful manner. Design is not coding, coding is not design Even when detailed procedural designs are created for program components, the level of abstraction of the design model is higher than the source code. The only design decisions made at the coding level should address the small implementation details that enable the procedural design to be coded. The design should be assessed for quality as it is being created, not after the fact A variety of design concepts and design measures are available to assist the designer in assessing quality throughout the development process. The design should be reviewed to minimize conceptual (semantic) errors There is sometimes a tendency to focus on minutiae when the design is reviewed, missing the forest for the trees. A design team should ensure that major conceptual elements of the design (omissions, ambiguity, inconsistency) have been addressed before worrying about the syntax of the design model. == Design concepts == Design concepts provide a designer with a foundation from which more sophisticated methods can be applied. Design concepts include: Abstraction Reducing the information content of a concept or an observable phenomenon, typically to retain only information that is relevant for a particular purpose. It is an act of Representing essential features without including the background details or explanations. Architecture The overall structure of the software and the ways in which that structure provides conceptual integrity for a system. Good software architecture will yield a good return on investment with respect to the desired outcome of the project, e.g. in terms of performance, quality, schedule and cost. Control hierarchy A program structure that represents the organization of a program component and implies a hierarchy of control. Data structure Representing the logical relationship between elements of data. Design pattern A designer may identify a design aspect of the system that has solved in the past. The reuse of such patterns can increase software development velocity. Information hiding Modules should be specified and designed so that information contained within a module is inaccessible to other modules that have no need for such information. Modularity Dividing the solution into parts (modules). Refinement The process of elaboration. A hierarchy is developed by decomposing a macrosco
Read more →
Uncertain data

In computer science, uncertain data is data that contains noise that makes it deviate from the correct, intended or original values. In the age of big data, uncertainty or data veracity is one of the defining characteristics of data. Data is constantly growing in volume, variety, velocity and uncertainty (1/veracity). Uncertain data is found in abundance today on the web, in sensor networks, within enterprises both in their structured and unstructured sources. For example, there may be uncertainty regarding the address of a customer in an enterprise dataset, or the temperature readings captured by a sensor due to aging of the sensor. In 2012 IBM called out managing uncertain data at scale in its global technology outlook report that presents a comprehensive analysis looking three to ten years into the future seeking to identify significant, disruptive technologies that will change the world. In order to make confident business decisions based on real-world data, analyses must necessarily account for many different kinds of uncertainty present in very large amounts of data. Analyses based on uncertain data will have an effect on the quality of subsequent decisions, so the degree and types of inaccuracies in this uncertain data cannot be ignored. Uncertain data is found in the area of sensor networks; text where noisy text is found in abundance on social media, web and within enterprises where the structured and unstructured data may be old, outdated, or plain incorrect; in modeling where the mathematical model may only be an approximation of the actual process. When representing such data in a database, an appropriate uncertain database model needs to be selected. == Example data model for uncertain data == One way to represent uncertain data is through probability distributions. Let us take the example of a relational database. There are three main ways to do represent uncertainty as probability distributions in such a database model. In attribute uncertainty, each uncertain attribute in a tuple is subject to its own independent probability distribution. For example, if readings are taken of temperature and wind speed, each would be described by its own probability distribution, as knowing the reading for one measurement would not provide any information about the other. In correlated uncertainty, multiple attributes may be described by a joint probability distribution. For example, if readings are taken of the position of an object, and the x- and y-coordinates stored, the probability of different values may depend on the distance from the recorded coordinates. As distance depends on both coordinates, it may be appropriate to use a joint distribution for these coordinates, as they are not independent. In tuple uncertainty, all the attributes of a tuple are subject to a joint probability distribution. This covers the case of correlated uncertainty, but also includes the case where there is a probability of a tuple not belonging in the relevant relation, which is indicated by all the probabilities not summing to one. For example, assume we have the following tuple from a probabilistic database: Then, the tuple has 10% chance of not existing in the database.
Read more →
Pose (computer vision)

In the fields of computing and computer vision, pose (or spatial pose) represents the position and the orientation of an object, each usually in three dimensions. Poses are often stored internally as transformation matrices. The term “pose” is largely synonymous with the term “transform”, but a transform may often include scale, whereas pose does not. In computer vision, the pose of an object is often estimated from camera input by the process of pose estimation. This information can then be used, for example, to allow a robot to manipulate an object or to avoid moving into the object based on its perceived position and orientation in the environment. Other applications include skeletal action recognition. == Pose estimation == The specific task of determining the pose of an object in an image (or stereo images, image sequence) is referred to as pose estimation. Pose estimation problems can be solved in different ways depending on the image sensor configuration, and choice of methodology. Three classes of methodologies can be distinguished: Analytic or geometric methods: Given that the image sensor (camera) is calibrated and the mapping from 3D points in the scene and 2D points in the image is known. If also the geometry of the object is known, it means that the projected image of the object on the camera image is a well-known function of the object's pose. Once a set of control points on the object, typically corners or other feature points, has been identified, it is then possible to solve the pose transformation from a set of equations which relate the 3D coordinates of the points with their 2D image coordinates. Algorithms that determine the pose of a point cloud with respect to another point cloud are known as point set registration algorithms, if the correspondences between points are not already known. Genetic algorithm methods: If the pose of an object does not have to be computed in real-time a genetic algorithm may be used. This approach is robust especially when the images are not perfectly calibrated. In this particular case, the pose represent the genetic representation and the error between the projection of the object control points with the image is the fitness function. Learning-based methods: These methods use artificial learning-based system which learn the mapping from 2D image features to pose transformation. In short, this means that a sufficiently large set of images of the object, in different poses, must be presented to the system during a learning phase. Once the learning phase is completed, the system should be able to present an estimate of the object's pose given an image of the object. == Camera pose ==
Read more →
Common data model

A common data model (CDM) can refer to any standardised data model which allows for data and information exchange between different applications and data sources. Common data models aim to standardise logical infrastructure so that related applications can "operate on and share the same data", and can be seen as a way to "organize data from many sources that are in different formats into a standard structure". A common data model has been described as one of the components of a "strong information system". A standardised common data model has also been described as a typical component of a well designed agile application besides a common communication protocol. Providing a single common data model within an organisation is one of the typical tasks of a data warehouse. == Examples of common data models == === Border crossings === X-trans.eu was a cross-border pilot project between the Free State of Bavaria (Germany) and Upper Austria with the aim of developing a faster procedure for the application and approval of cross-border large-capacity transports. The portal was based on a common data model that contained all the information required for approval. === Climate data === The Climate Data Store Common Data Model is a common data model set up by the Copernicus Climate Change Service for harmonising essential climate variables from different sources and data providers. === General information technology === Within service-oriented architecture, S-RAMP is a specification released by HP, IBM, Software AG, TIBCO, and Red Hat which defines a common data model for SOA repositories as well as an interaction protocol to facilitate the use of common tooling and sharing of data. Content Management Interoperability Services (CMIS) is an open standard for inter-operation of different content management systems over the internet, and provides a common data model for typed files and folders used with version control. The NetCDF software libraries for array-oriented scientific data implements a common data model called the NetCDF Java common data model, which consists of three layers built on top of each other to add successively richer semantics. === Health === Within genomic and medical data, the Observational Medical Outcomes Partnership (OMOP) research program established under the U.S. National Institutes of Health has created a common data model for claims and electronic health records which can accommodate data from different sources around the world. PCORnet, which was developed by the Patient-Centered Outcomes Research Institute, is another common data model for health data including electronic health records and patient claims. The Sentinel Common Data Model was initially started as Mini-Sentinel in 2008. It is used by the Sentinel Initiative of the USA's Food and Drug Administration. The Generalized Data Model was first published in 2019. It was designed to be a stand-alone data model as well as to allow for further transformation into other data models (e.g., OMOP, PCORNet, Sentinel). It has a hierarchical structure to flexibly capture relationships among data elements. The JANUS clinical trial data repository also provides a common data model which is based on the SDTM standard to represent clinical data submitted to regulatory agencies, such as tabulation datasets, patient profiles, listings, etc. === Logistics === SX000i is a specification developed jointly by the Aerospace and Defence Industries Association of Europe (ASD) and the American Aerospace Industries Association (AIA) to provide information, guidance and instructions to ensure compatibility and the commonality. The associated SX002D specification contains a common data model. === Microsoft Common Data Model === The Microsoft Common Data Model is a collection of many standardised extensible data schemas with entities, attributes, semantic metadata, and relationships, which represent commonly used concepts and activities in various businesses areas. It is maintained by Microsoft and its partners, and is published on GitHub. Microsoft's Common Data Model is used amongst others in Microsoft Dataverse and with various Microsoft Power Platform and Microsoft Dynamics 365 services. === Rail transport === RailTopoModel is a common data model for the railway sector. === Other === There are many more examples of various common data models for different uses published by different sources.
Read more →
Hyperparameter optimization

In machine learning, hyperparameter optimization or tuning is the problem of choosing a set of optimal hyperparameters for a learning algorithm. A hyperparameter is a parameter whose value is used to control the learning process, which must be configured before the process starts. Hyperparameter optimization determines the set of hyperparameters that yields an optimal model which minimizes a predefined loss function on a given data set. The objective function takes a set of hyperparameters and returns the associated loss. Cross-validation is often used to estimate this generalization performance, and therefore choose the set of values for hyperparameters that maximize it. == Approaches == === Grid search === The traditional method for hyperparameter optimization has been grid search, or a parameter sweep, which is simply an exhaustive searching through a manually specified subset of the hyperparameter space of a learning algorithm. A grid search algorithm must be guided by some performance metric, typically measured by cross-validation on the training set or evaluation on a hold-out validation set. Since the parameter space of a machine learner may include real-valued or unbounded value spaces for certain parameters, manually set bounds and discretization may be necessary before applying grid search. For example, a typical soft-margin SVM classifier equipped with an RBF kernel has at least two hyperparameters that need to be tuned for good performance on unseen data: a regularization constant C and a kernel hyperparameter γ. Both parameters are continuous, so to perform grid search, one selects a finite set of "reasonable" values for each, say C ∈ { 10 , 100 , 1000 } {\displaystyle C\in \{10,100,1000\}} γ ∈ { 0.1 , 0.2 , 0.5 , 1.0 } {\displaystyle \gamma \in \{0.1,0.2,0.5,1.0\}} Grid search then trains an SVM with each pair (C, γ) in the Cartesian product of these two sets and evaluates their performance on a held-out validation set (or by internal cross-validation on the training set, in which case multiple SVMs are trained per pair). Finally, the grid search algorithm outputs the settings that achieved the highest score in the validation procedure. Grid search suffers from the curse of dimensionality, but is often embarrassingly parallel because the hyperparameter settings it evaluates are typically independent of each other. === Random search === Random Search replaces the exhaustive enumeration of all combinations by selecting them randomly. This can be simply applied to the discrete setting described above, but also generalizes to continuous and mixed spaces. A benefit over grid search is that random search can explore many more values than grid search could for continuous hyperparameters. It can outperform Grid search, especially when only a small number of hyperparameters affects the final performance of the machine learning algorithm. In this case, the optimization problem is said to have a low intrinsic dimensionality. Random Search is also embarrassingly parallel, and additionally allows the inclusion of prior knowledge by specifying the distribution from which to sample. Despite its simplicity, random search remains one of the important base-lines against which to compare the performance of new hyperparameter optimization methods. === Bayesian optimization === Bayesian optimization is a global optimization method for noisy black-box functions. Applied to hyperparameter optimization, Bayesian optimization builds a probabilistic model of the function mapping from hyperparameter values to the objective evaluated on a validation set. By iteratively evaluating a promising hyperparameter configuration based on the current model, and then updating it, Bayesian optimization aims to gather observations revealing as much information as possible about this function and, in particular, the location of the optimum. It tries to balance exploration (hyperparameters for which the outcome is most uncertain) and exploitation (hyperparameters expected close to the optimum). In practice, Bayesian optimization has been shown to obtain better results in fewer evaluations compared to grid search and random search, due to the ability to reason about the quality of experiments before they are run. === Gradient-based optimization === For specific learning algorithms, it is possible to compute the gradient with respect to hyperparameters and then optimize the hyperparameters using gradient descent. The first usage of these techniques was focused on neural networks. Since then, these methods have been extended to other models such as support vector machines or logistic regression. A different approach in order to obtain a gradient with respect to hyperparameters consists in differentiating the steps of an iterative optimization algorithm using automatic differentiation. A more recent work along this direction uses the implicit function theorem to calculate hypergradients and proposes a stable approximation of the inverse Hessian. The method scales to millions of hyperparameters and requires constant memory. In a different approach, a hypernetwork is trained to approximate the best response function. One of the advantages of this method is that it can handle discrete hyperparameters as well. Self-tuning networks offer a memory efficient version of this approach by choosing a compact representation for the hypernetwork. More recently, Δ-STN has improved this method further by a slight reparameterization of the hypernetwork which speeds up training. Δ-STN also yields a better approximation of the best-response Jacobian by linearizing the network in the weights, hence removing unnecessary nonlinear effects of large changes in the weights. Apart from hypernetwork approaches, gradient-based methods can be used to optimize discrete hyperparameters also by adopting a continuous relaxation of the parameters. Such methods have been extensively used for the optimization of architecture hyperparameters in neural architecture search. === Evolutionary optimization === Evolutionary optimization is a methodology for the global optimization of noisy black-box functions. In hyperparameter optimization, evolutionary optimization uses evolutionary algorithms to search the space of hyperparameters for a given algorithm. Evolutionary hyperparameter optimization follows a process inspired by the biological concept of evolution: Create an initial population of random solutions (i.e., randomly generate tuples of hyperparameters, typically 100+) Evaluate the hyperparameter tuples and acquire their fitness function (e.g., 10-fold cross-validation accuracy of the machine learning algorithm with those hyperparameters) Rank the hyperparameter tuples by their relative fitness Replace the worst-performing hyperparameter tuples with new ones generated via crossover and mutation Repeat steps 2-4 until satisfactory algorithm performance is reached or is no longer improving. Evolutionary optimization has been used in hyperparameter optimization for statistical machine learning algorithms, automated machine learning, typical neural network and deep neural network architecture search, as well as training of the weights in deep neural networks. === Population-based === Population Based Training (PBT) learns both hyperparameter values and network weights. Multiple learning processes operate independently, using different hyperparameters. As with evolutionary methods, poorly performing models are iteratively replaced with models that adopt modified hyperparameter values and weights based on the better performers. This replacement model warm starting is the primary differentiator between PBT and other evolutionary methods. PBT thus allows the hyperparameters to evolve and eliminates the need for manual hypertuning. The process makes no assumptions regarding model architecture, loss functions or training procedures. PBT and its variants are adaptive methods: they update hyperparameters during the training of the models. On the contrary, non-adaptive methods have the sub-optimal strategy to assign a constant set of hyperparameters for the whole training. === Early stopping-based === A class of early stopping-based hyperparameter optimization algorithms is purpose-built for large search spaces of continuous and discrete hyperparameters, particularly when the computational cost to evaluate the performance of a set of hyperparameters is high. Irace implements the iterated racing algorithm, that focuses the search around the most promising configurations, using statistical tests to discard the ones that perform poorly. Another early stopping hyperparameter optimization algorithm is successive halving (SHA), which begins as a random search but periodically prunes low-performing models, thereby focusing computational resources on more promising models. Asynchronous successive halving (ASHA) further improves upon SHA's resource utilization profile by removing the need to synchronously evaluate a
Read more →
Gorn address

A Gorn address (Gorn, 1967) is a method of identifying and addressing any node within a tree data structure. This notation is often used for identifying nodes in a parse tree defined by phrase structure rules. The Gorn address is a sequence of zero or more integers conventionally separated by dots, e.g., 0 or 1.0.1. The root which Gorn calls can be regarded as the empty sequence. And the j {\displaystyle j} -th child of the i {\displaystyle i} -th child has an address i . j {\displaystyle i.j} , counting from 0. It is named after American computer scientist Saul Gorn.
Read more →
LMArena

Arena (formerly LMArena and Chatbot Arena) is a public, web-based platform that evaluates large language models (LLMs). Users enter prompts for two anonymous models to respond to and vote on the model that gave the better response, after which the models' identities are revealed. Users can also choose models to test themselves via the "Direct" selection. Companies which have supplied the company with their large language models include OpenAI, Google DeepMind, and Anthropic. The website has been used for preview releases of upcoming models. Chinese company DeepSeek tested its prototype models in the Arena months before its R1 model gained attention in Western media. Other notable pre-release models include OpenAI's GPT-5 under the codename "summit" and Google DeepMind's Gemini 2.5 Flash Image (an image-generation and editing model) under the codename "Nano Banana". Research has identified specific limitations in Arena's methodology. == History == Chatbot Arena was released on April 24, 2023. In June 2024, Chatbot Arena added image support. In September 2024, Chatbot Arena moved to its own dedicated domain name, lmarena.ai (or LMArena). In April 2025, Meta released Llama 4. Llama 4 Maverick beat GPT-4o and Gemini 2.0 Flash on LMArena, but the version of Maverick on LMArena unfairly differed from the publicly available version. LMArena updated their policies in response. In April 2025, LMArena incorporated as an independent company. That May, LMArena raised $100 million in a seed funding round, valuing the company at $600 million. Participants in the seed funding round included Andreessen Horowitz, UC Investments, Lightspeed Venture Partners, Felicis Ventures, and Kleiner Perkins. On January 6, 2026, LMArena announced the closing of a $150 million Series A funding round, bringing the company’s post-money valuation to approximately $1.7 billion. The round was led by Felicis and UC Investments (University of California), with participation from Andreessen Horowitz, The House Fund, LDVP, Kleiner Perkins, Lightspeed Venture Partners, and Laude Ventures. In January 2026, LMArena added video support. On January 28, 2026, LMArena rebranded to "Arena".
Read more →
Attensity

Attensity was an American company that provided social analytics and engagement applications for social customer relationship management (social CRM). Attensity's text analytics software applications extracted facts, relationships and sentiment from unstructured data. == History == Attensity was founded in 2000. An early investor in Attensity was In-Q-Tel, which funds technology to support the missions of the US Government and the broader DOD. InTTENSITY, an independent company that has combined Inxight with Attensity Software (the only joint development project that combines two InQTel funded software packages), was the exclusive distributor and outlet for Attensity in the Federal Market. In 2009, Attensity Corp., then based in Palo Alto, merged with Germany's Empolis and Living-e AG to form Attensity Group. In 2010, Attensity Group acquired Biz360, a provider of social media monitoring and market intelligence solutions. In early 2012, Attensity Group divested itself of the Empolis business unit via a management buyout; that unit currently conducts business under its pre-merger name. Attensity Group was a closely held private company. Its majority shareholder was Aeris Capital, a private Swiss investment office advising a high-net-worth individual and his charitable foundation. Foundation Capital, Granite Ventures, and Scale Venture Partners were among Biz360's investors and thus became shareholders in Attensity Group. In February 2016, Attensity's IP assets were acquired by InContact, and Attensity closed.
Read more →
Articulatory speech recognition

Articulatory speech recognition means the recovery of speech (in forms of phonemes, syllables or words) from acoustic signals with the help of articulatory modeling or an extra input of articulatory movement data. Speech recognition (or automatic speech recognition, acoustic speech recognition) means the recovery of speech from acoustics (sound wave) only. Articulatory information is extremely helpful when the acoustic input is in low quality, perhaps because of noise or missing data. Measurable information from the articulatory system (e.g. tongue, jaw movements) can supplement acoustic signals to improve phone recognition accuracy by 2%. However, attempts to estimate articulatory data from acoustic signals alone have not significantly enhanced recognition performance.
Read more →
EXAPT

EXAPT (a portmanteau of "Extended Subset of APT") is a production-oriented programming language that allows users to generate NC programs with control information for machining tools and facilitates decision-making for production-related issues that may arise during various machining processes. EXAPT was first developed to address industrial requirements. Through the years, the company created additional software for the manufacturing industry. Today, EXAPT offers a suite of SAAS products and services for the manufacturing industry. The trade name, EXAPT, is most commonly associated with the CAD/CAM-System, production data, and tool management software of the German company EXAPT Systemtechnik GmbH based in Aachen, DE. == General == EXAPT is a modularly built programming system for all NC machining operations as Drilling Turning Milling Turn-Milling Nibbling Flame-, laser-, plasma- and water jet cutting Wire eroding Operations with industrial robots Due to the modular structure, the main product groups, EXAPTcam and EXAPTpdo, are gradually expandable and permit individual software for the manufacturing industry used individually and also in a compound with an existing IT environment. == Functionality == EXAPTcam meets the requirements for NC planning, especially for the cutting operations such as turning, drilling, and milling up to 5-axis simultaneous machining. Thereby new process technologies, tool, and machine concepts are constantly involved. In the NC programming data from different sources such as 3D CAD models, drawings or tables can flow in. The possibilities of NC programming reaches from language-oriented to feature-oriented NC programming. The integrated EXAPT knowledge database and intelligent and scalable automatisms support the user. The EXAPT NC planning also covers the generation of production information as clamping and tool plans, presetting data or time calculations. The realistic simulation possibilities of NC planning and NC control data provide with production reliability. EXAPTpdo (EXAPT ProductionsDataOrganization) provides a neutrally applicable technology platform for the information compound of the NC planning - to the shop floor. This applies to all NC production data that are necessary for the set-up of NC machines, for the provision, presetting, and stocking of manufacturing resources and provided by EXAPTpdo in a central database. Besides classical functions of the tool management system (TMS) as the management of cutting tools, measuring, testing and clamping devices the technology data management and tool lifecycle management (TLM) is also included. System-supported "where-used lists" helps to handle the manufacturing resource cycle by secured requirement determination and requirement fulfillment. Unnecessary transports and unplanned dispositive adjustments are dropped, stocks are reduced, set-up times reduced and the throughput is increased. EXAPTpdo synchronizes involved systems within the value chain. Stock systems, MES systems or ERP systems (e.g. from the purchasing or production areas) do not work in isolation from each other but they interact with each other. EXAPTpdo provides the base to Smart Factory, for more flexibility in production and faster communication. == History == With the foundation of the EXAPT-Verein in 1967 as spin-off of the universities Aachen, Berlin and Stuttgart the further development "EXAPT (EXtended Subset of APT)" of the programming language "APT (Automatically Programmed Tool)" was focused and so the first milestone for the EXAPT history was set. In the same year the system EXAPT 1 for drilling and simple milling tasks became available. 1969 The industrial application of EXAPT 2 for the programming of NC machines with 2-axis linear and path control begins. In the following year, the development of the EXAPT modular system starts. 1972 BASIC-EXAPT is provided for the universal, homogeneous programming of all NC tasks. The support is made by the EXAPT applications consultancy. 1973 EXAPT 1.1 is provided for the programming of straight-cut and continuous-path controlled drilling and milling machines and machining centers. At the Hanover Fair (IHA 73) the interactive access to a mainframe via a time-sharing terminal for the part program entry and correction is presented and starts the replacement of the punch card. 1974 The possibilities for the use of process computers for the NC data transfer are leveled out. EXAPT offers the possibility of the result simulation when using plotters with display of tool paths and tools in assignment to the workpiece. In April 1975, the EXAPT NC Systemtechnik GmbH was founded with the aim, of enabling entry into the NC technique for small and medium-sized companies by a complete product and service program. In the following year, the system portfolio is extended with further system modules and service programs and the provision of postprocessors. 1978 The development activities on the EXAPT module system started in 1970 are completed. Using modern software techniques, the different system parts BASIC-EXAPT, EXAPT 1, EXAPT 1.1, and EXAPT 2 are composed of a total system. System support and applications consultancy become a new working focus. From the beginning to the middle of the 1980s Beside new portable software modules for CAD/CAM applications (e. g. CAPEX, NESTEX, CADEX, CADCPL), the first version of the EXAPT DNC system and extensions of the EXAPT NC programming system for the machining of sculptured surfaces are presented. 1988 EXAPT expands the software product range by systems for tool data management (BMO) and production data management (FDO). EXAPT trains more than 1,300 course participants including company-specific courses. 1992 The first version of the completely new product generation EXAPTplus is presented and the agency in Dresden is opened. 1993 The company name "EXAPT NC Systemtechnik GmbH" is changed to "EXAPT Systemtechnik GmbH." EXAPTplus is presented on PC under Windows NT at the EMO '93. The decentralization of the use of EXAPT systems expands the range of applications. In the following year, EXAPT-DNC is executable under Windows on a customary PC. Special hardware is not needed and so it can be used in compound with the database-supported EXAPT production data management system (FDO). 1995 EXAPTplus is also ready for complex application cases such as machining of tubes at extrusion tools. EXAPT-CADI provides the transfer of 2D CAD data to EXAPTplus. With the new office Gießen the marketing is strengthened. In the following year the EXAPT NC editor is developed for the direct processing of NC control data with tool path display and visualization of the tools. In the course of the market entry of more comfortable 3D CAD systems for the solid modelling of components a detailed evaluation of current systems is made in 1997. It is decided to use SolidWorks as a reference system for the solid-oriented NC planning with EXAPT. 1998 The first solution for the transfer of geometry data between SolidWorks and EXAPTplus is generated. The EXAPT organization systems are (beside SQL) also executable under Oracle now. The use of client server solutions supports the data flow in the production. 1999 AFR functions are provided in connection with EXAPTsolid to support a workpiece modelling for NC. The millennium capability is ensured for all EXAPT systems. AFR is a ground-breaking for the integration of third-party products. 2002 EXAPT-BMG is developed for the generation and visualization of tools with additional functions for the assembly from components. The acquisition of tools with their geometric and technological presentation offers extensive support of the NC planning with EXAPT systems. 2003 EXAPTpdo is available to optimize the process chains in production planning and production execution optimally regarding the increasing requirements of changing production conditions. 2004 Diverse system extensions are made in EXAPTplus, EXAPTsolid, EXAPT NC editor, EXAPTpdo for the complete machining on turning/milling centres with result reliability because of more extensive simulation based on realNC (Tecnomatix), for the use of new complex tool systems and the compound use between ERP systems as SAP and intelligent CNC systems. In the following year, EXAPTpdo is extended for the cross-order set-up optimization and provision of manufacturing re-sources especially for single and small series production with connection to purchase and physical portfolio management. 2006 The EXAPT systems are available for extended use as an information platform for production, the time management, and similar requirements. EXAPTsolid is extended for the feature-oriented milling operation and machine simulation. The NC programming of complex machine tools, e.g. three-turret-turning/milling centers is supported by EXAPT systems, as well as the use of multi-functional tools. 2007 A module for 3-5-axis simultaneous milling machining is presented.
Read more →
Query understanding

Query understanding is the process of inferring the intent of a search engine user by extracting semantic meaning from the searcher’s keywords. Query understanding methods generally take place before the search engine retrieves and ranks results. It is related to natural language processing but specifically focused on the understanding of search queries. == Methods == === Stemming and lemmatization === Many languages inflect words to reflect their role in the utterance they appear in. The variation between various forms of a word is likely to be of little importance for the relatively coarse-grained model of meaning involved in a retrieval system, and for this reason the task of conflating the various forms of a word is a potentially useful technique to increase recall of a retrieval system. Stemming algorithms, also known as stemmers, typically use a collection of simple rules to remove suffixes intended to model the language’s inflection rules. For some languages, there are simple lemmatisation methods to reduce a word in query to its lemma or root form or its stem; for others, this operation involves non-trivial string processing and may require recognizing the word's part of speech or referencing a lexical database. The effectiveness of stemming and lemmatization varies across languages. === Query Segmentation === Query segmentation is a key component of query understanding, aiming to divide a query into meaningful segments. Traditional approaches, such as the bag-of-words model, treat individual words as independent units, which can limit interpretative accuracy. For languages like Chinese, where words are not separated by spaces, segmentation is essential, as individual characters often lack standalone meaning. Even in English, the BOW model may not capture the full meaning, as certain phrases—such as "New York"—carry significance as a whole rather than as isolated terms. By identifying phrases or entities within queries, query segmentation enhances interpretation, enabling search engines to apply proximity and ordering constraints, ultimately improving search accuracy and user satisfaction. === Entity recognition === Entity recognition is the process of locating and classifying entities within a text string. Named-entity recognition specifically focuses on named entities, such as names of people, places, and organizations. In addition, entity recognition includes identifying concepts in queries that may be represented by multi-word phrases. Entity recognition systems typically use grammar-based linguistic techniques or statistical machine learning models. === Query rewriting === Query rewriting is the process of automatically reformulating a search query to more accurately capture its intent. Query expansion adds additional query terms, such as synonyms, in order to retrieve more documents and thereby increase recall. Query relaxation removes query terms to reduce the requirements for a document to match the query, thereby also increasing recall. Other forms of query rewriting, such as automatically converting consecutive query terms into phrases and restricting query terms to specific fields, aim to increase precision. === Spelling Correction === Automatic spelling correction is a critical feature of modern search engines, designed to address common spelling errors in user queries. Such errors are especially frequent as users often search for unfamiliar topics. By correcting misspelled queries, search engines enhance their understanding of user intent, thereby improving the relevance and quality of search results and overall user experience.
Read more →
Huawei Mobile Services

Huawei Mobile Services (HMS) is a collection of proprietary services and high level application programming interfaces (APIs) developed by Huawei Technologies Co., Ltd. Its hub known as HMS Core serves as a toolkit for app development on Huawei devices. HMS is typically installed on Huawei devices on top of running HarmonyOS 4.x and earlier operating system on its earlier devices running the Android operating system with EMUI including devices already distributed with Google Mobile Services. Alongside, HMS Core Wear Engine for Android phones with lightweight based LiteOS wearable middleware app framework integration connectivity like notifications, status etc. HMS consists of seven key services and the HMS Core. The key services are Huawei ID, Huawei Cloud, AppGallery, Themes, Huawei Video, Browser, and Assistant. The web browser is based on Chromium. Huawei Quick Apps is the alternative to Google Instant Apps. By January 2020, over 50,000 apps had been integrated with HMS Core. Its rival, Google Mobile Services has 3 million apps on Google's Play Store. The AppGallery claimed 180 billion downloads in 2019. In March 2020, HMS was used by 650 million monthly active users across 170 countries. A Chinese phone manufacturer, LeTV, hosted a smartphone business communication meeting in Beijing on September 27, 2021, to demonstrate its phone, the LeTV S1. This was the first smartphone from a third-party manufacturer to include Huawei Mobile Services (HMS). == HMS on Android and HarmonyOS == Huawei Mobile Services on Android goes all the way back to August 2016 as Huawei ID services for phones, basic functionalities for Huawei P9 series. However, in May 2019 proved to be a significant change to HMS when Google was prohibited from working with Huawei on any new devices extending ecosystem for AppGallery store front launched in April 2018, year prior. This also included bundling Google's Apps, including Gmail, Maps and YouTube. Any new Huawei devices launched after 16 May 2019 were unable to receive updates from Google services and would be considered 'uncertified' meaning Huawei's only solution at the time was to turn HMS into a genuine competitor to Google and incentivize app developers to utilize the platform. Huawei officially launched Huawei Mobile Services in China on December 24, 2019, as a beta. Huawei expanded Huawei Mobile Services in Europe in February 2020 and other markets in Asia, Latin America, Middle East & Africa, Canada, Mexico followed outside banned US market. HMS is available on the Honor 9X Pro, View 30 Pro, Huawei Mate XS. HMS is also available, alongside GMS, on many other Huawei models launched before the ban. Huawei promised developers it would take, “less than 10 minutes", to port their app over to HMS - to illustrate the ease of portability between Google's Play Store and the HMS AppGallery. On January 15, 2020, HMS Core 4.0 (Huawei Mobile Services Core 4.0) was officially launched. Huawei announced that at this time, there were already 1.3 million developers and 55,000 applications on board. The next day, Huawei held a developer day event in London and invested £20 million to encourage developers in the United Kingdom and Ireland to use HMS. On July 15, 2021, Huawei expanded HMS with classic HarmonyOS dual-framework that provided Java support and eventually with JavaScript and ArkTS (eTS) language support with HMS Core 6.0 for app development with primarily Android apps, alongside limited HAP imperative developed based apps that shares AOSP file system libraries in all types of devices from smartphones, tablets, smart screens, smartwatches, and car machines. Including various third-party development frameworks, such as React Native, Cordova, etc. At HDC 2023, Huawei unveiled HarmonyOS 5, marking a total break from the hybrid Android derived platform. This shift replaced the legacy Android and classic HarmonyOS-based HMS SDK with a full native API developer kit SDK built solely on OpenHarmony. The architecture moved from middleware services to vertical integration path. In this new model, HMS Core libraries are no longer external add-ons but are bundled directly into the system and DevEco Studio as native HarmonyOS Kits. == HMS Core == HMS Core is a hub for Huawei Mobile Services and serves as a toolkit for app development on Huawei devices. The core comprises Development, Growth and Monetizing and was created as a replacement for Google Mobile Services (GMS) Core. HMS core services were available in more than 55,000 apps in June 2020; HMS Core 5.0 debuted in September 2020. HMS Core 6.0 was launched in June 2021 with extended support for Huawei Cloud services. In June 2021, the number of registered developers within the HMS ecosystem was 4 million, and the number of apps integrated with the HMS Core had reached 134,000. As of July 2022, registered developers within HMS ecosystem had grown to 5 million, and the number of apps integrated with the HMS Core reached 203,000. The number of apps had grown to 220,000 by 30 September 2022. == AppGallery == The AppGallery has a key rival, Google's Play Store on Android. The AppGallery is available in 170 countries, across 78 languages. == Reception == The reception of HMS is mixed, with the majority of discussion based around the key Google/Android apps which are not yet present on the AppGallery and whether or not this presents a significant problem to users. The open development of HMS Core has been regarded by some as benefiting the Android project as a whole, "If Huawei continues to invest in a holistically open approach ... the result could be that we could all end up a bit less beholden to Google".
Read more →
Teamwork (project management)

Teamwork.com is an Irish, privately owned, web-based software company headquartered in Cork, Ireland. Teamwork creates task management and team collaboration software. Founded in 2007, as of 2016 the company stated that its software was in use by over 370,000 organisations worldwide (including Disney, Spotify and HP), and that it had over 2.4m users. == History == Peter Coppinger and Dan Mackey founded a company, Digital Crew, in 2007. This company built websites, intranets and custom web-based solutions for clients in Cork, Ireland. Frustrated by whiteboards and software management tools, Coppinger wanted a software system that would help manage client projects and which would be easy to use and generic enough to be used by different types of companies. Originally 37signals Basecamp users themselves, Coppinger and Mackey were frustrated by the limited feature set, and by Basecamp's apparent inaction on their feedback. In October 2007, Coppinger and Mackey launched Teamwork Project Manager, nicknamed TeamworkPM. In March 2015, this was renamed as Teamwork Projects. In 2014, after two years of negotiations, TeamworkPM bought the domain name 'Teamwork.com' for US$675,000 (€500,000). At the time this was one of the most expensive domain name purchases by an Irish company, and involved the transfer of a domain name which had been dormant since it was first acquired by the original owner in 1999. In 2015, Teamwork.com was named by Gartner to be one of their "Cool Vendors" in the Program and Portfolio Management Category. This was followed by the launch of a new real-time messaging product, Teamwork Chat, in January 2015. In June 2015, the company announced a drive to recruit for 40 positions by the end of the year. This was followed by the announcement that the company was investing more than €1 million in a new office, and had leased office space in Park House, Blackpool. In June 2016, Teamwork.com undertook a further recruitment drive to entice developers to Cork. In July 2021, the company announced that it had raised an investment of $70 million (€59.1 million) from venture capital firm Bregal Milestone to fund further growth. == Products == Teamwork markets a number of cloud-based applications, including Teamwork, Teamwork Desk, Teamwork Spaces, Teamwork CRM and Teamwork Chat. Teamwork was launched on 4 October 2007, at which time it had time management, milestone management, file sharing, time tracking, and messaging features. Teamwork's platform reportedly integrates with martech software like HubSpot, as well as other productivity tools like Slack, G Suite, MS Teams, Zapier, Dropbox and QuickBooks. == Awards == In 2016, Teamwork was awarded Cork's Best SME in the Cork Chamber of Commerce "Company of the Year" awards. In 2016, Teamwork was named number 7 in Deloitte's Fast 50 tech companies hit €1.6bn turnover. In 2015, Teamwork was identified as a Gartner "Cool Vendor" in the Program and Portfolio Management Category.
Read more →
1 Second Everyday

1 Second Everyday (1SE) is an application developed by Cesar Kuriyama. The application allows the user to record one second of video every day and then chronologically edits (mashes) them together into a single film. It is compatible with iOS and Android. The idea of the application was developed by Kuriyama's 1 Second Everyday — Age 30 video. The application was launched in January 2013. 1 Second Everyday played a part in the plot of Chef and also became the inspiration for the 2014 short animated clip Feast. == Background == === Kuriyama's video === In February 2011, when Cesar Kuriyama turned 30, after saving money, he quit his job in an advertising firm and took a year off to travel. During this time, he started working on a project he called 1 Second Everyday. As part of the project, every day he recorded one second of video – something that was supposed to help him remember that day. He started the project because he was frustrated with his memory. He planned to stockpile the 365 one-second clips into one film to serve as a memento of his year. While working on the project Kuriyama realized that recording one second every day impacted the decisions he made in a positive way. After a year he made a 365-second clip out of his recordings. The video called 1 Second Everyday – Age 30, went viral. According to Kuriyama, he was initially inspired to take a year off from work by a TED talk given by Stefan Sagmeister called "The Power of Time Off." Kuriyama also delivered a TED talk about 1 Second Everyday in 2012 at TED 2012 in Long Beach California. === Kickstarter campaign === After completing his own video, Kuriyama decided to develop an application that would allow the users to record one second every day and compile their own videos. He developed a prototype of the application and then in 2012, he launched a Kickstarter campaign to raise funds for completing the application. The campaign became one of the most backed app campaigns in the history of Kickstarter. It was backed by 11,281 backers who pledged a total of $56,959 on an initial goal of $20,000. Following the completion of the Kickstarter campaign, he partnered with an application design studio in Brooklyn to develop the application. 1 Second Everyday was released two weeks after the completion of its Kickstarter campaign. == Application == The application was released for iOS on 10 January 2013. An Android-compatible version of the application was developed later. Using it, the user can record the videos in the application or they can select one second portions from their libraries. 1 Second Everyday dates every snippet. The user can also set alarms to remember to record their daily video. In order to compile a video, the user selects the seconds they want and the application creates a compilation video. The user can keep multiple timelines. It also allows users to post directly on social networks. The main interface in 1 Second Everyday is a calendar, which shows the user which days have snippets and which they can still fill in. In the beginning, 1 Second Everyday restricted the recording to one second. However, the developers later released Super Seconds, which allowed users to record an additional half a second video. In 2014, 1 Second Everyday Crowds was launched, which is an area in the application featuring compilations of second clips from different users. == In the media == The Kickstarter campaign of 1 Second Everyday was featured in Entrepreneur's 3 Innovative Tech Startups on Kickstarter Right Now in 2012. The application was featured in The New York Times, The Washington Post, Gawker and other media outlets. By the end of the launch day, it was in Top 10 Free Apps on App Store. It was also selected as the App of the Week on GeekWire in 2013. Several other one-second compilation videos were also posted on the Internet after Kuriyama's video gained media attention. Sam Cornwell, an English photographer documented his son Indigo's growth using a montage of one-second iPhone clips. He shot these clips every single day from the moment of birth right up to the baby's first birthday. According to Cornwell, he was inspired by Kuriyama's project. The video of Cornwell's son gained considerable media attention after it was posted on YouTube. Save the Children also made a video commercial based on a similar format that showed a British girl oblivious of the Syrian war end up being a refugee. 1SE was a finalist for the Fast Company Innovation by Design Award in 2015, but lost to Google Maps. In 2015, Google Android created a gallery, Leap Second 2015, with the help of Droga5 and Kuriyama. The gallery showcased how people around the world enjoyed the one extra second of their lives. Through the 1 Second Everyday app available at Google Play, people were able to submit their extra second, which were then vetted and added to the gallery. The viewers were able to view other celebratory seconds from around the world as well as searching for them using different hashtags.
Read more →
Fred (chatbot)

Fred, or FRED, was an early chatbot written by Robby Garner. == History == The name Fred was initially suggested by Karen Lindsey, and then Robby jokingly came up with an acronym, "Functional Response Emulation Device." Fred has also been implemented as a Java application by Paco Nathan called JFRED Archived 2008-08-24 at the Wayback Machine. Fred Chatterbot is designed to explore Natural Language communications between people and computer programs. In particular, this is a study of conversation between people and ways that a computer program can learn from other people's conversations to make its own conversations. Fred used a minimalistic "stimulus-response" approach. It worked by storing a database of statements and their responses, and made its own reply by looking up the input statements made by a user and then rendering the corresponding response from the database. This approach simplified the complexity of the rule base, but required expert coding and editing for modifications. Fred was a predecessor to Albert One, which Garner used in 1998 and 1999 to win the Loebner Prize.
Read more →