AI Art Quora

AI Art Quora — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Agent verification

    Agent verification

    Agent verification is activity to gain assurances that purposeful artificial constructs act in accordance with their specifications. While primitive forms of inorganic agents have been used in manufacturing for centuries, the study of artificial agents did not begin until the mid 20th century. Foundational work on such agents was closely bound with the emergence of artificial intelligence as an academic discipline. Early agents deployed for industrial control systems and in computing were often controlled by quite simple logic however, not involving artificial intelligence as such. When deployed as part of a multi-agent system, even such simple agents could require special agent orientated testing methods, as their collective behaviour was challenging to verify with traditional testing techniques. Difficulties in providing assurances that agents will not behave in dangerous ways became more prevalent after the introduction of LLM agents, especially after the rapid acceleration of their deployment in 2025. The verification of agent behaviour can be conducted by formal or informal methods. Informal verification requires less mathematical skill. But when agents are part of systems where errors have significant risks — such as danger to human life, environmental damage or major financial loss — formal verification is preferred. Both regulators and system designers themselves like formal verification as it provides a high degree of mathematical certainty. It is not however always possible to formally test all aspects of an agent based system's behaviour, especially where newer LLM based agents are concerned, due in part to their high degree of autonomy. Accordingly, agent verification for low impact deployments might be carried out only with informal methods, while for high impact deployments, it may be performed with a mix of formal and informal techniques. == Terminology == In academia, the term agent verification is often defined to mean activity concerned with gaining assurance that the agent behaves in accordance with its specification - whether by processes such as testing or simulation. 'Verification' is typically contrasted with 'validation', the latter meaning activity concerned with checking that the specification itself meets user or real world needs. Such definitions are not universally adhered to however - for example, in some workplaces and documents, the words 'verification' and 'validation' can be used synonymously. Efforts to gain confidence in Agents have intensified sharply since 2025 due to the rapid roll out of LLM agents; different terms are sometimes used in the commercial sector. Here the term 'agent verification' can be used in the same sense as it is in academia, but sometimes the same activity can be covered by more ambiguous and wider ranging terms such as 'Agent governance' , 'Agent observability' or 'AI agent policing'. == History == === Classical agents === The theoretical underpinnings for artificial (inorganic) agents emerged in the mid 20th century, with establishment of cybernetics and artificial intelligence. Oliver Selfridge's 1958 Pandemonium - A Paradigm for Learning paper was an important early theoretical contribution in establishing agent oriented architecture. Practical implementations of agents for real world applications began to become widespread in the 1990s, after the introduction of the belief–desire–intention software model (BDI), and agent-oriented programming. Pure digital agents were deployed in computer infrastructure for purposes such as monitoring, while agents connected to real-world sensors and actuators were increasingly used in industrial control systems. While the concept of artificial agents was interwoven with early artificial intelligence studies right from the start, early agents lacked general purpose reasoning capabilities, often only having simple if then logic. Even a device as simple as a thermostat, which has a sensor and a means of acting, can be considered a proto agent in this sense. Verifying the behaviours of a simple single agent system is not generally especially difficult, but it can be a different matter when several simple agents coexist in the same system. Craig Reynolds's work on boids showed that relatively complex, "intelligent" behaviour can emerge from a number of such simple agents working together in a Multi-agent system (MAS). By the 1990s, even the behaviour of a single agent system could sometimes be quite complex; in accordance with the Belief–desire–intention software model, agents could have believes that might evolve over time. Agents were increasingly introduced that were controlled by quite large decision tree models, which had new vulnerabilities to adversarial attack. It was becoming increasingly apparent that traditional software verification methods had limitations for testing such agents, or even for the more primitive type of agents when they were deployed as part of a MAS. It was the use of agents for industrial control systems, sometimes associated with robotics, that lent urgency to the practice of agent verification. Informal testing might be acceptable for digital agents used say to monitor whether each of an organisation's computers are properly licensed. But with an increasing potential for faulty agents to result in a failure that might cause a large fire to break out at a chemical manufacturing plant, a botched medical operation, or even a crashed aircraft, the need to develop reliable means of verifying behaviour of such agents was considered urgent. The Foundation for Intelligent Physical Agents was established in 1996. From the late 90s, a growing number of industry and university based scientists began working on the problem, with researchers publishing papers on the verification of both single and multi agent systems. Much of this work showed how formal verification techniques like model checking could be used to gain a high level of assurance that agent based systems would conform with their specification. A 2018 systematic review covering 231 studies found that model checking was the most common technique for agent verification, with theorem proving the second most commonly used formal verification method. In the first two decades of the 20th century, agents run by AI became more common, with Siri and Alexa being well known examples. But such agents still lacked general reasoning capabilities and did not pose new pressing problems for agent verification. === General purpose reasoning agents === The advent of LLMs created huge potential for further use of artificial agents, as agents based on them could have general purpose cognitive abilities. Agents run by LLMs (and occasionally non-LLM foundation models) have similar vulnerability to adversarial attack as those run by decision tree models. The wider scope of actions for LLM agents has created new challenges for their verification, over and above those present for classical agents. For example, the LLM's neural network endows it with infinite domains, an especial challenge for traditional formal verification techniques. Academics began to study the problems involved in verifying LLM agents from 2018. Deployment of such agents began to accelerate in late 2023 after OpenAI's "function-calling" API was made available, and especially after Anthropic's late 2024 introduction of Model Context Protocol (MCP), a standardised way for LLM agents to gain contextual awareness, and to act on the world by calling various external tools. The rapid rollout of LLM agents following MCP's release has seen the task of agent verification receive increased attention within academia, and also from the private sector. In 2024 and 2025 several startups focusing on LLM agent verification have been founded in both Europe and the US to meet growing demand. == Approaches == === Formal verification === Formal verification involves proving the correctness of some or all aspects of a system using mathematical methods. Such methods can range from manual formal proof, to verification assisted with automated theorem provers like Isabelle. For agent verification, model checking is by far the most frequently used formal verification method; for pre-LLM models it was often complemented with techniques using computation tree logic. Another common method is theorem proving. Formal verification provides a higher degree of confidence than informal methods, but it is not always used, even when it is possible. Sometimes a person or organisation developing software agents won't have the necessary skills, or may not see it as worth the effort if the agent(s) will not have the ability to cause much harm even if they malfunction. When agents are deployed in systems where errors could have serious consequences, the ability of formal verification methods to provide mathematical certainty tends to be strongly preferred by both regulators and designers themselves. But even for high impact systems, formal verificatio

    Read more →
  • Task Force on Process Mining

    Task Force on Process Mining

    The IEEE Task Force on Process Mining (TFPM) is a non-commercial association for process mining. The IEEE (Institute of Electrical and Electronics Engineers) Task Force on Process Mining was established in October 2009 as part of the IEEE Computational Intelligence Society at the Eindhoven University of Technology. The task force is supported by over 80 organizations and has around 750 members. The main goal of the task force is to promote the research, development, education, and understanding of process mining. == About == In 2012, the IEEE World Congress on Computational Intelligence/ IEEE Congress on Evolutionary Computation held a session on Process Mining. Process mining is a type of research that is a mix of computational intelligence and data mining, as well as process modeling and analysis. === Activities and organization === The Task Force on Process Mining has a Steering Committee and an Advisory Board. The Steering Committee, was chaired by Wil van der Aalst in its inception in 2009, defined 15 action lines. These include the organization of the annual International Process Mining Conference (ICPM) series, standardization efforts leading to the IEEE XES standard for storing and exchanging event data, and the Process Mining Manifesto which was translated into 16 languages. The Task Force on Process Mining also publishes a newsletter, provides data sets, organizes workshops and competitions, and connects researchers and practitioners. In 2016, the IEEE Standards Association published the IEEE Standard for Extensible Event Stream (XES), which is a widely accepted file format by the process mining community. As of 2023, Boudewijn van Dongen serves as chair of the Steering Committee. Wil van der Aalst and Moe Wynn both serve as vice-chair of the Steering Committee.

    Read more →
  • Data drilling

    Data drilling

    Data drilling (also drilldown) refers to any of various operations and transformations on tabular, relational, and multidimensional data. The term has widespread use in various contexts, but is primarily associated with specialized software designed specifically for data analysis. == Common data drilling operations == There are certain operations that are common to applications that allow data drilling. Among them are: Query operations: tabular query pivot query === Tabular query === Tabular query operations consist of standard operations on data tables. Among these operations are: search sort filter (by value) filter (by extended function or condition) transform (e.g., by adding or removing columns) Consider the following example: Fred and Wilma table (Fig 001): gender, fname, lname, home male, fred, chopin, Poland male, fred, flintstone, bedrock male, fred, durst, usa female, wilma, flintstone, bedrock female, wilma, rudolph, usa female, wilma, webb, usa male, fred, johnson, usa The preceding is an example of a simple flat file table formatted as comma-separated values. The table includes first name, last name, gender and home country for various people named fred or wilma. Although the example is formatted this way, it is important to emphasize that tabular query operations (as well as all data drilling operations) can be applied to any conceivable data type, regardless of the underlying formatting. The only requirement is that the data be readable by the software application in use. === Pivot query === A pivot query allows multiple representations of data according to different dimensions. This query type is similar to tabular query, except it also allows data to be represented in summary format, according to a flexible user-selected hierarchy. This class of data drilling operation is formally, (and loosely) known by different names, including crosstab query, pivot table, data pilot, selective hierarchy, intertwingularity and others. To illustrate the basics of pivot query operations, consider the Fred and Wilma table (Fig 001). A quick scan of the data reveals that the table has redundant information. This redundancy could be consolidated using an outline or a tree structure or in some other way. Moreover, once consolidated, the data could have many different alternate layouts. Using a simple text outline as output, the following alternate layouts are all possible with a pivot query: Summarize by gender (Fig 001): female flintstone, wilma rudolph, wilma webb, wilma male chopin, fred flintstone, fred durst, fred johnson, fred (Dimensions = gender; Tabular fields = lname, fname;) Summarize by home, lname (Fig 001): bedrock flintstone fred wilma Poland chopin fred usa ... (Dimensions = home, lname; Tabular fields = fname;) ==== Uses ==== Pivot query operations are useful for summarizing a corpus of data in multiple ways, thereby illustrating different representations of the same basic information. Although this type of operation appears prominently in spreadsheets and desktop database software, its flexibility is arguably under-utilized. There are many applications that allow only a 'fixed' hierarchy for representing data, and this represents a substantial limitation. == Drillup == Drillup is the opposite of drilldown. For example, if you drilldown to see the revenue of one product, then you might want to drillup to see the revenue of all products.

    Read more →
  • Authoritative Legal Entity Identifier

    Authoritative Legal Entity Identifier

    An Authoritative Legal Entity Identifier (ALEI) is the identifier assigned by a government jurisdiction authorized by statute or decree to create a legal entity and to maintain the authoritative registries of legal entities. ALEIs are used within supply chain data, ERP applications and master data management systems to support accurate and consistent identification of entities in digital records, supply chains, and government databases. ALEIs are described in the international standard ISO 8000-116, which outlines a structured format that makes the locally unique identifier into a globally unique one and ensures global interoperability and data quality. == Structure == An ALEI is composed of three main components: a prefix that identifies the jurisdiction and register, a subdomain element (optional), and the local registration number of the entity. For example, the identifier "US-DE.BER:3031657" refers to an entity registered in the Delaware Business Entity Register in the United States. The standardization of this structure is governed by ISO 8000-116, which is designed to ensure each ALEI is globally unique and resolvable. == Comparison with other identifiers == ALEIs differ from proxy identifiers such as the DUNS number, NCAGE code, or the Legal Entity Identifier (LEI) managed by GLEIF. While proxy identifiers can be issued by institutions that do not create legal entities, ALEIs are created and maintained by public bodies with the authority to form and register legal entities. This authoritative origin makes ALEIs particularly suitable for applications involving legal traceability, government regulation, and international transparency efforts. == Usage == ALEIs are increasingly utilized to identify legal entities in public and private datasets. The identifiers support supply chain accuracy, regulatory compliance, and the unification of master data. The first practical implementation of an ALEI was the International Business Registration Number (IBRN), developed to provide globally unique identifiers for registered business entities. IBRNs are issued by authorized government jurisdictions and are used to verify entities across borders, particularly in the context of trade facilitation and data exchange systems. For instance, business directories and registration systems in U.S. states like Connecticut provide structured registration documents that can be used to verify the ALEIs they issue. The use of ALEIs has been recommended by international organizations such as the Extractive Industries Transparency Initiative (EITI) and Open ownership to improve beneficial ownership registries. == Policy and regulation == ALEIs have been referenced in policy consultations such as those related to the U.S. Financial Data Transparency Act. Federal institutions including the Federal Reserve and FDIC have examined the potential for ALEIs to unify entity identification across regulatory databases.

    Read more →
  • LMArena

    LMArena

    Arena (formerly LMArena and Chatbot Arena) is a public, web-based platform that evaluates large language models (LLMs). Users enter prompts for two anonymous models to respond to and vote on the model that gave the better response, after which the models' identities are revealed. Users can also choose models to test themselves via the "Direct" selection. Companies which have supplied the company with their large language models include OpenAI, Google DeepMind, and Anthropic. The website has been used for preview releases of upcoming models. Chinese company DeepSeek tested its prototype models in the Arena months before its R1 model gained attention in Western media. Other notable pre-release models include OpenAI's GPT-5 under the codename "summit" and Google DeepMind's Gemini 2.5 Flash Image (an image-generation and editing model) under the codename "Nano Banana". Research has identified specific limitations in Arena's methodology. == History == Chatbot Arena was released on April 24, 2023. In June 2024, Chatbot Arena added image support. In September 2024, Chatbot Arena moved to its own dedicated domain name, lmarena.ai (or LMArena). In April 2025, Meta released Llama 4. Llama 4 Maverick beat GPT-4o and Gemini 2.0 Flash on LMArena, but the version of Maverick on LMArena unfairly differed from the publicly available version. LMArena updated their policies in response. In April 2025, LMArena incorporated as an independent company. That May, LMArena raised $100 million in a seed funding round, valuing the company at $600 million. Participants in the seed funding round included Andreessen Horowitz, UC Investments, Lightspeed Venture Partners, Felicis Ventures, and Kleiner Perkins. On January 6, 2026, LMArena announced the closing of a $150 million Series A funding round, bringing the company’s post-money valuation to approximately $1.7 billion. The round was led by Felicis and UC Investments (University of California), with participation from Andreessen Horowitz, The House Fund, LDVP, Kleiner Perkins, Lightspeed Venture Partners, and Laude Ventures. In January 2026, LMArena added video support. On January 28, 2026, LMArena rebranded to "Arena".

    Read more →
  • Australian Geoscience Data Cube

    Australian Geoscience Data Cube

    The Australian Geoscience Data Cube (AGDC) is an approach to storing, processing and analyzing large collections of Earth observation data. The technology is designed to meet challenges of national interest by being agile and flexible with vast amounts of layered grid data. The AGDC reduces processing time of traditional image analysis by calibrating, pre-computing known extents, pixel alignment and storing metadata in a cell lattice structure. The temporal-pixel aligned data can often be analysed faster across space and time dimensions than previous scene based techniques. This allows the AGDC to be flexible in tackling future challenges and improve analysis times on every-increasing data repositories of earth observation. The AGDC has also been used internationally to allow countries to maintain ecologically sustainable programs and reduce the difficulty curve of utilizing Remote Sensing data. == Background == The AGDC was originally conceived by Geoscience Australia but is now maintained in a partnership between Geoscience Australia, Commonwealth Scientific and Industrial Research Organisation (CSIRO) and National Computational Infrastructure National Facility (Australia) (NCI). This is made possible by the funding from the partnership and a number of organisations such as National Collaborative Research Infrastructure Strategy (NCRIS). == Analysis ready data, ingestion and indexing == The data processed in the cube is made analysis ready before being ingested and indexed into the AGDC. Analysis ready data is pre-processed data that has applied corrections for instrument calibration (gains and offsets), geolocation (spatial alignment) and radiometry (solar illumination, incidence angle, topography, atmospheric interference). The ingestion process manages the translation of datasets into the storage units while maintaining a database index. The data within the storage and index can be accessed via API calls often compiled within code such as Python (programming language). Example: s2a_l1c = dc.load(product='s2a_level1c_granule',x=(147.36, 147.41), y=(-35.1, -35.15), measurements=['04','03','02'], output_crs='EPSG:4326', resolution=(-0.00025,0.00025)) === Datasets currently stored === Geoscience Australia Landsat Surface Reflectance (1987 to present) Landsat Pixel Quality Landsat Fractional Cover Landsat NDVI === Datasets that have been piloted === USGS Landsat Surface Reflectance SRTM DEM Himawari 8 MODIS Sentinel-2 L1C / S2A Australian Gridded Climate Data == Open source == The AGDC code base is situated in GitHub as an open repository. The core code base moved to the Open Data Cube in early 2017 as part of an international collaboration. Whilst the code base is the Open Data Cube, individual cubes exist as their own right such as the AGDC on the National Computational Infrastructure National Facility (Australia) (NCI) using the High-Performance Computing Cluster HPCC. The core code can be installed on personal computers or public computers (using git) and has many unit tests. Documentation for the code base exists on Read the Docs. == Challenges of the AGDC == The AGDC is designed to meet nationally significant challenges such as the following. Sustainability Environment Water resource management Disaster assist Policy development Community planning Forest preservation Carbon measurement == International awards == The AGDC won the 2016 Content Platform of the Year award from Geospatial World Forum.

    Read more →
  • Information and media literacy

    Information and media literacy

    Information and media literacy (IML) is a combination of information literacy and media literacy. It enables people to show and make informed judgments as users of information and media, as well as to become skillful creators and producers of information and media messages. The transformative nature of IML includes creative works and creating new knowledge; to publish and collaborate responsibly requires ethical, cultural and social understanding. IML is also known as media and information literacy (MIL). UNESCO first adopted the term MIL in 2008 as a "composite concept" combining the competencies of information literacy and media literacy. UNESCO emphasizes the importance of global education in media and information literacy, and in 2013 defined Media and Information Literacy (MIL) as the ability to access, evaluate, use, and create information and media content in critical and ethical ways. Prior to the 1990s, the primary focus of information literacy was research skills. Media literacy, a study that emerged around the 1970s, traditionally focuses on the analysis and the delivery of information through various forms of media. Information literacy, as a skill proposed as early as 1974, centers on an individual's ability to recognize information needs and effectively locate, evaluate, and use information. These days, the study of information literacy has been extended to include the study of media literacy in many countries like the UK, Australia and New Zealand. It is also referred to as information and communication technologies (ICT) in the United States. Educators such as Gregory Ulmer have also defined the field as electracy.Media literacy is the ability to actively inquire into and think critically about information. It includes the ability to understand, evaluate, and create media content, and is an essential skill in today's information society. Livingstone, Van Couvering, and Thumim (2008) described the distinction between media literacy and information literacy: "Media literacy views media as lenses or windows for observing the world and expressing the self, whereas information literacy sees information as a tool for taking action in the world." == Integration of media and information literacy == Historically, the fields of information and media literacy have been separate, but over the course of the 21st century there have been calls to integrate both fields. Most definitions of information and media literacy include not only the abilities to locate, access, and analyze information but also the ability to create information. Only by integrating media literacy with information literacy can students better understand the sources of information and how it is used. Media education has primarily taken place in educational institutions, while information education has primarily occurred in libraries. Discussions surrounding the overlap of information literacy and media literacy came to fruition in the mid-to-late 2000s and 2010s as noted by Marcus Leaning. == In the digital age == The definition of literacy is "the ability to read and write". In practice many more skills are needed to locate, critically assess and make effective use of information. By extension, literacy now also includes the ability to manage and interact with digital information and media, in personal, shared and public domains. Historically, "information literacy" has largely been seen from the relatively top-down, organisational viewpoint of library and information sciences. However the same term is also used to describe a generic "information literacy" skill. The modern digital age has led to the proliferation of information spread across the Internet. Individuals must be able to recognize whether information is true or false and better yet know how to locate, evaluate, use, and communicate information in various formats; this is called information literacy. Towards the end of the 20th century, literacy was redefined to include "new literacies" relating to the new skills needed in everyday experience. "Multiliteracies" recognised the multiplicity of literacies, which were often used in combination. "21st century skills" frameworks link new literacies to wider life skills such as creativity, critical thinking, accountability. What these approaches have in common is a focus on the multiple skills needed by individuals to navigate changing personal, professional and public "information landscapes". As the conventional definition of literacy itself continues to evolve among practitioners, so too has the definition of information literacies. Noteworthy definitions include: Zurkowski defined information literacy as "the ability to find known or knowable content on any subject." CILIP, the Chartered Institute of Library and Information Practitioners, defines information literacy as "the ability to think critically and make balanced judgements about any information we find and use". In the United States, the definition proposed by the Association of College and Research Libraries (ACRL) is the most widely recognized. It defines information literacy as "a set of abilities requiring individuals to recognize when information is needed and to locate, evaluate, and use the needed information effectively." JISC, the Joint Information Systems Committee, refers to information literacy as one of six "digital capabilities", seen as an interconnected group of elements centered on "ICT literacy". Mozilla groups digital and other literacies as "21st century skills", a "broad set of knowledge, skills, habits and traits that are important to succeed in today's world". UNESCO, the United Nations Educational, Scientific and Cultural Organization, recognizing the necessity of teaching and learning both traditional and new types of information, the global importance of education was emphasized in 2008 through the "Teacher Media and Information Literacy (MIL) Curriculum". It defines MIL as a set of competencies that enable citizens to access, retrieve, understand, evaluate, use, create, and share information and media content in all formats through various tools in a critical, ethical, and effective manner, so as to participate in and carry out personal, professional, and social activities. Besides this, UNESCO also asserts information literacy as a "universal human right". == 21st-century students == In modern society, although the overall level of education has improved, the channels for knowledge production and dissemination have become increasingly diverse and commercialized, and traditional authoritative institutions no longer hold a monopoly over knowledge validation. While digital platforms have broadened access to information, they have also weakened trust mechanisms and evaluation standards, making epistemological skepticism a norm. Moreover, with the rise and spread of social media, misinformation and disinformation can be just as easily accessed in both densely and sparsely populated areas. These factors further underscore the importance of information literacy education. The IML learning capacities prepare students to be 21st century literate. According to Jeff Wilhelm (2000), "technology has everything to do with literacy. And being able to use the latest electronic technologies has everything to do with being literate." He supports his argument with J. David Bolter's statement that "if our students are not reading and composing with various electronic technologies, then they are illiterate. They are not just unprepared for the future; they are illiterate right now, in our current time and context". In a broader sense, developing this advanced competency of media and information literacy is essential, as it is crucial for students to exercise their freedom of expression in the 21st century. Wilhelm's statement is supported by the 2005 Wired World Phase II (YCWW II) survey conducted by the Media Awareness Network of Canada on 5000 Grade 4 – 11 students. The key findings of the survey were: 62% of Grade 4 students prefer the Internet. 38% of Grade 4 students prefer the library. 91% of Grade 11 students prefer the Internet. 9% of Grade 11 students prefer the library. Marc Prensky (2001) uses the term "digital native" to describe people who have been brought up in a digital world. The Internet has been a pervasive element of young people's home lives. 94% of kids reported that they had Internet access at home, and a significant majority (61%) had a high-speed connection. By the time kids reach Grade 11, half of them (51 percent) have their own Internet-connected computer, separate and apart from the family computer. The survey also showed that young Canadians are now among the most wired in the world. Contrary to the earlier stereotype of the isolated and awkward computer nerd, today's wired kid is a social kid. In general, many students are better networked through the use of technology than most teachers and parents, who may not understand the abilities of technology.

    Read more →
  • Query rewriting

    Query rewriting

    Query rewriting is a typically automatic transformation that takes a set of database tables, views, and/or queries, usually indices, often gathered data and query statistics, and other metadata, and yields a set of different queries, which produce the same results but execute with better performance (for example, faster, or with lower memory use). Query rewriting can be based on relational algebra or an extension thereof (e.g. multiset relational algebra with sorting, aggregation and three-valued predicates i.e. NULLs as in the case of SQL). The equivalence rules of relational algebra are exploited, in other words, different query structures and orderings can be mathematically proven to yield the same result. For example, filtering on fields A and B, or cross joining R and S can be done in any order, but there can be a performance difference. Multiple operations may be combined, and operation orders may be altered. The result of query rewriting may not be at the same abstraction level or application programming interface (API) as the original set of queries (though often is). For example, the input queries may be in relational algebra or SQL, and the rewritten queries may be closer to the physical representation of the data, e.g. array operations. Query rewriting can also involve materialization of views and other subqueries; operations that may or may not be available to the API user. The query rewriting transformation can be aided by creating indices from which the optimizer can choose (some database systems create their own indexes if deemed useful), mandating the use of specific indices, creating materialized and/or denormalized views, or helping a database system gather statistics on the data and query use, as the optimality depends on patterns in data and typical query usage. Query rewriting may be rule based or optimizer based. Some sources discuss query rewriting as a distinct step prior to optimization, operating at the level of the user accessible algebra API (e.g. SQL). There are other, largely unrelated concepts also named similarly, for example, query rewriting by search engines.

    Read more →
  • Transderivational search

    Transderivational search

    Transderivational search (often abbreviated to TDS) is a psychological and cybernetics term, meaning when a search is being conducted for a fuzzy match across a broad field. In computing the equivalent function can be performed using content-addressable memory. Unlike usual searches, which look for literal (i.e. exact, logical, or regular expression) matches, a transderivational search is a search for a possible meaning or possible match as part of communication, and without which an incoming communication cannot be made any sense of whatsoever. It is thus an integral part of processing language, and of attaching meaning to communication. In NLP (Neuro-linguistic programming), a transderivational search (Bandler and Grinder, 1976) is essentially the process of searching back through one's stored memories and mental representations to find the personal reference experiences from which a current understanding or mental map has been derived. By the end of 1976, Grinder and Bandler had combined Satir’s and Perls’ language patterns and Erickson’s hypnotic language and use of metaphor with anchoring to create new processes that they called collapsing anchors, trans-derivational search, changing personal history, and reframing. A psychological example of TDS is in Ericksonian hypnotherapy, where vague suggestions are used that the patient must process intensely in order to find their own meanings, thus ensuring that the practitioner does not intrude his own beliefs into the subject's inner world. == TDS in human communication and processing == Because TDS is a compelling, automatic and unconscious state of internal focus and processing (i.e. a type of everyday trance state), and often a state of internal lack of certainty, or openness to finding an answer (since something is being checked out at that moment), it can be utilized or interrupted, in order to create, or deepen, trance. TDS is a fundamental part of human language and cognitive processing. Arguably, every word or utterance a person hears, for example, and everything they see or feel and take note of, results in a very brief trance while TDS is carried out to establish a contextual meaning for it. === Examples === Leading statements: "And those thoughts you had yesterday..." the human mind cannot process hearing this phrase, without at some level searching internally for some thoughts or other that it had yesterday, to make the subject of the sentence. "The many colors that fruit can be" likewise starts the human mind considering even if briefly, different fruit sorted by color. "You did it again, didn't you!" This everyday manipulative use of TDS usually sends the recipient looking internally for some "it" they may have done for which blame is being fairly given. Regardless of whether such a matter can be identified, guilt or anger may result. "There has been pain, hasn't there" the mind of a patient suffering an illness will find it very hard or impossible to hear or answer this sentence without conducting internal searches to verify whether this is true or not, or to find an example if so. "You'd forgotten something [or: some part of your body], hadn't you?" the mind usually checks through the various things, or parts of the body, on hearing this, seeing if each in turn has been forgotten. Textual ambiguity: "Do you remember line dancing on the steps?" Without sufficient context, some statements may trigger TDS in order to resolve inherent ambiguity in the interpretation of a posed question. Do I remember a bygone fad called "line dancing on the steps"? Do I remember personally engaging in dancing in the past? Do I remember my routine practice dancing by focusing on the steps of the dance? Do I tend to forget about dancing when I am standing on steps? "Penny-wise and pound the table dance to the beat of a different drummer". The mixing of cliché and stock phrases may trigger TDS in order to reconcile the discrepancies between expected and actual utterances in sequence. Although TDS is often associated with spoken language, it can be induced in any perceptual system. Thus Milton Erickson's "hypnotic handshake" is a technique that leaves the other person performing TDS in search of meaning to a deliberately ambiguous use of touch.

    Read more →
  • Master data management

    Master data management

    Master data management (MDM) is a discipline in which business and information technology collaborate to ensure the uniformity, accuracy, stewardship, semantic consistency, and accountability of the enterprise's official shared master data assets. == Reasons for master data management == Data consistency and accuracy: MDM ensures that the organization's critical data is consistent and accurate across all systems, reducing discrepancies and errors caused by multiple, siloed copies of the same data. Improved decision-making: By providing a single version of the truth (SVOT), MDM enables organizations to deliver the right data to decision makers, allowing them to clearly understand business performance and make informed, data-driven decisions. Operational efficiency: With the consistent and accurate data provided by an MDM, operational processes such as reporting and inventory management can be automated to improve efficiency. Employee learning, onboarding, and customer service also become more efficient, as MDM data facilitates rapid, accurate, and thorough information retrieval, permitting more employee time to be spent on work. Regulatory compliance: MDM tries to help organizations comply with industry standards and regulations by ensuring that master data is accurately recorded, maintained, and audited. However, issues with data quality, classification, and reconciliation may require data transformation. As with other Extract, Transform, Load-based data movements, these processes are expensive and inefficient, reducing return on investment for a project. == Business unit and product line segmentation == As a result of business unit and product line segmentation, the same entity (whether a customer, supplier, or product) will be included in different product lines. This leads to data redundancy and even confusion. For example, a customer takes out a mortgage at a bank. If the marketing and customer service departments have separate databases, advertisements might still be sent to the customer, even though they've already signed up. The two parts of the bank are unaware, and the customer is sent irrelevant communications. Record linkage can associate different records corresponding to the same entity, mitigating this issue. == Mergers and acquisitions == One of the most common problems for master data management is company growth through mergers or acquisitions. Reconciling these separate master data systems can present difficulties, as existing applications have dependencies on the master databases. Ideally, database administrators resolve this problem through deduplication of the master data as part of the merger. Over time, as further mergers and acquisitions occur, the problem can multiply. Data reconciliation processes can become extremely complex or even unreliable. Some organizations end up with 10, 15, or even 100 separate and poorly integrated master databases. This can cause serious problems in customer satisfaction, operational efficiency, decision support, and regulatory compliance. Another problem involves determining the proper degrees of detail and normalization to include in the master data schema. For example, in a federated Human Resources environment, the enterprise software may focus on storing people's data as current status, adding a few fields to identify the date of hire, date of last promotion, etc. However, this simplification can introduce business-impacting errors into dependent systems for planning and forecasting. The stakeholders of such systems may be forced to build a parallel network of new interfaces to track the onboarding of new hires, planned retirements, and divestment, which works against one of the aims of master data management. == People, processes and technology == Master data management is enabled by technology, but is more than the technologies that enable it. An organization's master data management capability will also include people and processes in its definition. === People === Several roles should be staffed within MDM. Most prominently, the Data Owner and the Data Steward. Several people would likely be allocated to each role and each person responsible for a subset of Master Data (e.g. one data owner for employee master data, another for customer master data). The Data Owner is responsible for the requirements for data definition, data quality, data security, etc. as well as for compliance with data governance and data management procedures. The Data Owner should also be funding improvement projects in case of deviations from the requirements. The Data Steward is running the master data management on behalf of the data owner and probably also being an advisor to the Data Owner. === Processes === Master data management can be viewed as a "discipline for specialized quality improvement" defined by the policies and procedures put in place by a data governance organization. It has the objective of providing processes for collecting, aggregating, matching, consolidating, quality-assuring, persisting and distributing master data throughout an organization to ensure a common understanding, consistency, accuracy and control, in the ongoing maintenance and application use of that data. Processes commonly seen in master data management include source identification, data collection, data transformation, normalization, rule administration, error detection and correction, data consolidation, data storage, data distribution, data classification, taxonomy services, item master creation, schema mapping, product codification, data enrichment, hierarchy management, business semantics management and data governance. === Technology === A master data management tool can be used to support master data management by removing duplicates, standardizing data (mass maintaining), and incorporating rules to eliminate incorrect data from entering the system to create an authoritative source of master data. Master data are the products, accounts, and parties for which the business transactions are completed. Where the technology approach produces a "golden record" or relies on a "source of record" or "system of record", it is common to talk of where the data is "mastered". This is accepted terminology in the information technology industry, but care should be taken, both with specialists and with the wider stakeholder community, to avoid confusing the concept of "master data" with that of "mastering data". ==== Implementation models ==== There are several models for implementing a technology solution for master data management. These depend on an organization's core business, its corporate structure, and its goals. These include: Source of record Registry Consolidation Coexistence Transaction/centralized ===== Source of record ===== This model identifies a single application, database, or simpler source (e.g. a spreadsheet) as being the "source of record" (or "system of record" where solely application databases are relied on). The benefit of this model is its conceptual simplicity, but it may not fit with the realities of complex master data distribution in large organizations. The source of record can be federated, for example by groups of attributes (so that different attributes of a master data entity may have different sources of record) or geographically (so that different parts of an organization may have different master sources). Federation is only applicable in certain use cases, where there is a clear delineation of which subsets of records will be found in which sources. The source of record model can be applied more widely than simply to master data, for example to reference data. ==== Transmission of master data ==== There are several ways in which master data may be collated and distributed to other systems. This includes: Data consolidation – The process of capturing master data from multiple sources and integrating it into a single hub (operational data store) for replication to other destination systems. Data federation – The process of providing a single virtual view of master data from one or more sources to one or more destination systems. Data propagation – The process of copying master data from one system to another, typically through point-to-point interfaces in legacy systems. == Change management in implementation == Challenges in adopting master data management within large organizations often arise when stakeholders disagree on a "single version of the truth" concept is not affirmed by stakeholders, who believe that their local definition of the master data is necessary. For example, the product hierarchy used to manage inventory may be entirely different from the product hierarchies used to support marketing efforts or pay sales representatives. It is above all necessary to identify if different master data is genuinely required. If it is required, then the solution implemented (technology and process) must be able to allow multiple versions of the truth to exist but will prov

    Read more →
  • Browsing

    Browsing

    Browsing is a kind of orienting strategy. It is supposed to identify something of relevance for the browsing organism. In context of humans, it is a metaphor taken from the animal kingdom. It is used, for example, about people browsing open shelves in libraries, window shopping, or browsing databases or the Internet. In library and information science, it is an important subject, both purely theoretically and as applied science aiming at designing interfaces which support browsing activities for the user. == Definition == In 2011, Birger Hjørland provided the following definition: "Browsing is a quick examination of the relevance of a number of objects which may or may not lead to a closer examination or acquisition/selection of (some of) these objects. It is a kind of orienting strategy that is formed by our "theories", "expectations" and "subjectivity". == Controversies == As with any kind of human psychology, browsing can be understood in biological, behavioral, or cognitive terms on the one hand or in social, historical, and cultural terms on the other hand. In 2007, Marcia Bates researched browsing from "behavioural" approaches, while Hjørland (2011a+b) defended a social view. Bates found that browsing is rooted in our history as exploratory, motile animals hunting for food and nesting opportunities. According to Hjørland (2011a), on the other hand, Marcia Bates' browsing for information about browsing is governed by her behavioral assumptions, while Hjørland's browsing for information about browsing is governed by his socio-cultural understanding of human psychology. In short: Human browsing is based on our conceptions and interests. === Is browsing a random activity? === Browsing is often understood as a random activity. Dictionary.com, for example, has this definition: "to glance at random through a book, magazine, etc.". Hjørland suggests, however, that browsing is an activity that is governed by our metatheories. We may dynamically change our theories and conceptions but when we browse, the activity is governed by the interests, conceptions, priorities and metatheories that we have at that time. Therefore, browsing is not totally random. == Browsing versus analytical search strategies == In 1997, Gary Marchionini wrote: "A fundamental distinction is made between analytical and browsing strategies [...]. Analytical strategies depend on careful planning, the recall of query terms, and iterative query reformulations and examinations of results. Browsing strategies are heuristic and opportunistic and depend on recognizing relevant information. Analytic strategies are batch oriented and half duplex (turn talking) like human conversation, whereas browsing strategies are more interactive, real-time exchanges and collaborations between the information seeker and the information system. Browsing strategies demand a lower cognitive load in advance and a steadier attentional load throughout the information-seeking process. When it comes to Browsing, giblets are amazing." == Orienting strategies == Some sociologists, such as Berger and Zelditch in 1993, Wagner in 1984, and Wagner & Berger in 1985, have used the term "orienting strategies". They find that orienting strategies should be understood as metatheories: "Consider the very large proportion of sociological theory that is in the form of metatheory. It is discussion about theory: about what concepts it should include, about how those concepts should be linked, and about how theory should be studied. Similar to Kuhn’s paradigms, theories of this sort provide guidelines or strategies for understanding social phenomena and suggest the proper orientation of the theorist to these phenomena; they are orienting strategies. Textbooks in theory frequently focus on orienting strategies such as functionalism, exchange, or ethnomethodology." Sociologists thus use metatheories as orienting strategies. We may generalize and say that all people use metatheories as orienting strategies and that this is what direct our attention and also our browsing – also when we are not conscious about it.

    Read more →
  • Artificial Intelligence Applications Institute

    Artificial Intelligence Applications Institute

    The Artificial Intelligence Applications Institute (AIAI) at the School of Informatics at the University of Edinburgh is a non-profit technology transfer organisation that promoted research in the field of artificial intelligence. == History == The Artificial Intelligence Applications Institute (AIAI) was founded in 1983 at the University of Edinburgh as a specialist research and technology-transfer unit focusing on the practical uses of artificial intelligence (AI). The institute was established by Professor Jim Howe and colleagues from the Science and Engineering Research Council (SERC) Special Interest Group in AI in the Department of Artificial Intelligence, with a mission to apply AI techniques to solve real-world industrial and governmental problems. Under the directorship of Austin Tate, who served from 1985 to 2019, AIAI became one of the leading UK research centres devoted to AI programming systems, intelligent planning systems, decision support, and knowledge-based engineering. It collaborated with both academic partners and international organisations such as the European Space Agency and the UK Ministry of Defence. In 2001, AIAI joined the newly created Centre for Intelligent Systems and their Applications (CISA) within the University's School of Informatics. In December 2019, the institute was renamed the Artificial Intelligence and its Applications Institute to reflect a broader integration of fundamental and applied AI research. == Research programmes == AIAI’s research spans multiple areas of artificial intelligence, including: AI programming Systems - Edinburgh Prolog, Edinburgh Common Lisp, Logo; Knowledge representation and reasoning – development of ontologies, rule-based inference, and semantic modelling; Automated planning and scheduling – intelligent task management systems used in aerospace, manufacturing, and emergency response; Natural language processing and intelligent agents – interaction frameworks for human–computer collaboration; AI ethics and decision-making – research into responsible deployment and evaluation of autonomous systems. The institute also contributes to interdisciplinary fields such as computational creativity, explainable AI, and human–AI interaction. AIAI maintains close collaboration with the Bayes Centre and the Alan Turing Institute through joint research programmes and doctoral training initiatives. == Technology transfer and impact == From its inception, AIAI has combined academic research with technology-transfer activity, offering professional training, industrial consultancy, and bespoke software systems. It pioneered one of the earliest knowledge-based project-management systems, O-Plan, later evolved into the I-Plan framework used for autonomous planning and workflow management.

    Read more →
  • Conversica

    Conversica

    Conversica is a US-based cloud software technology company, headquartered in San Mateo, California, that provides two-way AI-driven conversational software and a suite of Intelligent Virtual Assistants for businesses to engage customers via email, chat, and SMS. == History == 2007: The company was founded by Ben Brigham in Bellingham, Washington, originally as AutoFerret.com. The company's initial product was a Customer Relationship Management (CRM) targeted at automotive dealerships. This soon expanded to lead generation, and then lead validation and qualification. The AI Conversica uses currently was made to follow up on and filter out low-quality leads. The focus of the company shifted toward this automated lead engagement technology. 2010: The company started commercially selling AVA, the first Automated Virtual Assistant for sales, and the company name was changed to AVA.ai. Early customers for AVA were automotive dealerships. As the company moved away from generating leads themselves, and providing the CRM themselves, it became necessary to integrate with existing CRM and Marketing Automation platforms, such as DealerSocket, VinSolutions and Salesforce. 2013: The company raised $16m Series A funding, led by Kennet Partners, and named Mark Bradley as CEO. It also moved its headquarters from Bellingham, Washington to Foster City, California. 2014: The company changed its name from AVA.ai to Conversica. 2015: Alex Terry joined Conversica as its CEO. The business expanded to include customers in additional verticals, including technology, education, and financial services. 2016: The company raised $34m Series B funding, led by Providence Strategic Growth. 2017: Conversica expanded its intelligent automation platform and IVAs to support additional communication channels (e-mail and SMS text messaging) and communication languages. Conversica also opened a new technology center in Seattle, Washington to expand its AI and machine learning capabilities. 2018: The company raised $31m Series C funding, led by Providence Strategic Growth. Conversica also acquired Intelligens.ai, providing a regional presence in Latin America with an office in Las Condes, Santiago, Chile. The company launched an AI-powered Admissions Assistant for Higher Education industry. 2019: Conversica was selected by Fast Company magazine as one of the Top 10 Most Innovative AI Companies in the World, and was named Marketo's Technology Partner of the Year. The company officially expanded into the EMEA region with the opening of a London office. As of August 2019, Conversica has over 50 different integrations with third parties. In October Conversica won three awards at the fourth annual Global Annual Achievement Awards for Artificial Intelligence. Also that month, Alex Terry stepped down from his role as CEO and was replaced by Jim Kaskade. 2020: As part of Conversica's response to COVID-19, they optimized the business to become profitable in both 2Q20 and 3Q20, before reinvesting in 4Q20. The company transitioned both international operations in EMEA and LATAM to an indirect model with partners (LeadFabric and Nectia Cloud Solutions respectively), and moved a portion of its US-based employees to near-shore centers in Mexico and Brazil, effectively downsizing the company from 250 to 200. Conversica's reseller partner, Nectia, is a major Latin American affiliate and Chile's number one Salesforce partner, and, as part of the partnership, Nectia devoted capital to a brand new company segment, Predict-IA, dedicated to web-based artificial intelligent solutions. Predict-IA was able to immediately service all LATAM opportunities and clients with Conversica's AI Assistants with end-to-end services (marketing, sales, professional services, customer success, and technical support). Conversica's reseller partner, Leadfabric, has offices in Belgium, Amsterdam, Paris, UK, Taiwan, and Romania. == Technology == Conversica's Revenue Digital Assistants™ are AI assistants who engage with leads, prospects, customers, employees, and other persons of interest (Contacts) in a two-way human-like manner, via email, SMS text, and website chat, in English, French, German, Spanish, Portuguese, and Japanese. The RDAs are built on an Intelligent Automation platform that leverages natural language understanding, natural language processing, natural language generation, deep learning and machine learning. The Assistants are generally deployed alongside sales and marketing, customer success, account management, and higher education admissions teams, as part of an augmented workforce. The Intelligent Automation platform integrates with over 50 external systems, including CRM, Marketing Automation, and other systems of record. A partial list of integration partners includes: Salesforce, Marketo, Oracle, HubSpot, DealerSocket, Reynolds & Reynolds, CDK Global, VinSolutions and many more.

    Read more →
  • Sieve of Pritchard

    Sieve of Pritchard

    In mathematics, the sieve of Pritchard is an algorithm for finding all prime numbers up to a specified bound. Like the ancient sieve of Eratosthenes, it has a simple conceptual basis in number theory. It is especially suited to quick hand computation for small bounds. Whereas the sieve of Eratosthenes marks off each non-prime for each of its prime factors, the sieve of Pritchard avoids considering almost all non-prime numbers by building progressively larger wheels, which represent the pattern of numbers not divisible by any of the primes processed thus far. It thereby achieves a better asymptotic complexity, and was the first sieve with a running time sublinear in the specified bound. Its asymptotic running-time has not been improved on, and it deletes fewer composites than any other known sieve. It was created in 1979 by Paul Pritchard. Since Pritchard has created a number of other sieve algorithms for finding prime numbers, the sieve of Pritchard is sometimes singled out by being called the wheel sieve (by Pritchard himself) or the dynamic wheel sieve. == Overview == A prime number is a natural number that has no natural number divisors other than the number 1 and itself. To find all the prime numbers less than or equal to a given integer N, a sieve algorithm examines a set of candidates in the range 2, 3, …, N, and eliminates those that are not prime, leaving the primes at the end. The sieve of Eratosthenes examines all of the range, first removing all multiples of the first prime 2, then of the next prime 3, and so on. The sieve of Pritchard instead examines a subset of the range consisting of numbers that occur on successive wheels, which represent the pattern of numbers left after each successive prime is processed by the sieve of Eratosthenes. For i > 0, the ith wheel Wi represents this pattern. It is the set of numbers between 1 and the product Pi = p1 · p2 ⋯ pi of the first i prime numbers that are not divisible by any of these prime numbers (and is said to have an associated length Pi). This is because adding Pi to a number does not change whether it is divisible by one of the first i prime numbers, since the remainder on division by any one of these primes is unchanged. So W1 = {1} with length P1 = 2 represents the pattern of odd numbers; W2 = {1,5} with length P2 = 6 represents the pattern of numbers not divisible by 2 or 3; etc. Wheels are so-called because Wi can be usefully visualized as a circle of circumference Pi with its members marked at their corresponding distances from an origin. Then rolling the wheel along the number line marks points corresponding to successive numbers not divisible by one of the first i prime numbers. The animation shows W2 being rolled up to 30. It is useful to define Wi → n for n > 0 to be the result of rolling Wi up to n. Then the animation generates W2 → 30 = {1,5,7,11,13,17,19,23,25,29}. Note that up to 52 − 1 = 24, this consists only of 1 and the primes between 5 and 25. The sieve of Pritchard is derived from the observation that this holds generally: for all i > 0, the values in Wi → (p2i+1 − 1) are 1 and the primes between pi+1 and p2i+1. It even holds for i = 0, where the wheel has length 1 and contains just 1 (representing all the natural numbers). So the sieve of Pritchard starts with the trivial wheel W0 and builds successive wheels until the square of the wheel's first member after 1 is at least N. Wheels grow very quickly, but only their values up to N are needed and generated. It remains to find a method for generating the next wheel. Note in the animation that W3 = {1,5,7,11,13,17,19,23,25,29} − {5 · 1 , 5 · 5} can be obtained by rolling W2 up to 30 and then removing 5 times each member of W2.This also holds generally: for all i ≥ 0, Wi+1 = (Wi → Pi+1) − {pi+1 · w | w ∈ Wi}. Rolling Wi past Pi just adds values to Wi, so the current wheel is first extended by getting each successive member starting with w = 1, adding Pi to it, and inserting the result in the set. Then the multiples of pi+1 are deleted. Care must be taken to avoid a number being deleted that itself needs to be multiplied by pi+1. The sieve of Pritchard as originally presented does so by first skipping past successive members until finding the maximum one needed, and then doing the deletions in reverse order by working back through the set. This is the method used in the first animation above. A simpler approach is just to gather the multiples of pi+1 in a list, and then delete them. Another approach is given by Gries and Misra. If the main loop terminates with a wheel whose length is less than N, it is extended up to N to generate the remaining primes. The algorithm, for finding all primes up to N, is therefore as follows: Start with a set W = {1} and length = 1 representing wheel 0, and prime p = 2. As long as p2 ≤ N, do the following: if length < N, then extend W by repeatedly getting successive members w of W starting with 1 and inserting length + w into W as long as it does not exceed p · length or N; increase length to the minimum of p · length and N. repeatedly delete p times each member of W by first finding the largest ≤ length and then working backwards. note the prime p, then set p to the next member of W after 1 (or 3 if p was 2). if length < N, then extend W to N by repeatedly getting successive members w of W starting with 1 and inserting length + w into W as long as it does not exceed N; On termination, the rest of the primes up to N are the members of W after 1. === Example === To find all the prime numbers less than or equal to 150, proceed as follows. Start with wheel 0 with length 1, representing all natural numbers 1, 2, 3...: 1 The first number after 1 for wheel 0 (when rolled) is 2; note it as a prime. Now form wheel 1 with length 2 × 1 = 2 by first extending wheel 0 up to 2 and then deleting 2 times each number in wheel 0, to get: 1 2 The first number after 1 for wheel 1 (when rolled) is 3; note it as a prime. Now form wheel 2 with length 3 × 2 = 6 by first extending wheel 1 up to 6 and then deleting 3 times each number in wheel 1, to get 1 2 3 5 The first number after 1 for wheel 2 is 5; note it as a prime. Now form wheel 3 with length 5 × 6 = 30 by first extending wheel 2 up to 30 and then deleting 5 times each number in wheel 2 (in reverse order), to get 1 2 3 5 7 11 13 17 19 23 25 29 The first number after 1 for wheel 3 is 7; note it as a prime. Now wheel 4 has length 7 × 30 = 210, so we only extend wheel 3 up to our limit 150. (No further extending will be done now that the limit has been reached.) We then delete 7 times each number in wheel 3 until we exceed our limit 150, to get the elements in wheel 4 up to 150: 1 2 3 5 7 11 13 17 19 23 25 29 31 37 41 43 47 49 53 59 61 67 71 73 77 79 83 89 91 97 101 103 107 109 113 119 121 127 131 133 137 139 143 149 The first number after 1 for this partial wheel 4 is 11; note it as a prime. Since we have finished with rolling, we delete 11 times each number in the partial wheel 4 until we exceed our limit 150, to get the elements in wheel 5 up to 150: 1 2 3 5 7 11 13 17 19 23 25 29 31 37 41 43 47 49 53 59 61 67 71 73 77 79 83 89 91 97 101 103 107 109 113 119 121 127 131 133 137 139 143 149 The first number after 1 for this partial wheel 5 is 13. Since 13 squared is at least our limit 150, we stop. The remaining numbers (other than 1) are the rest of the primes up to our limit 150. Just 8 composite numbers are removed, once each. The rest of the numbers considered (other than 1) are prime. In comparison, the natural version of Eratosthenes sieve (stopping at the same point) removes composite numbers 184 times. == Pseudocode == The sieve of Pritchard can be expressed in pseudocode, as follows: algorithm Sieve of Pritchard is input: an integer N >= 2. output: the set of prime numbers in {1,2,...,N}. let W and Pr be sets of integer values, and all other variables integer values. k, W, length, p, Pr := 1, {1}, 2, 3, {2}; {invariant: p = pk+1 and W = Wk ∩ {\displaystyle \cap } {1,2,...,N} and length = minimum of Pk,N and Pr = the primes up to pk} while p2 <= N do if (length < N) then Extend W,length to minimum of plength,N; Delete multiples of p from W; Insert p into Pr; k, p := k+1, next(W, 1) if (length < N) then Extend W,length to N; return Pr ∪ {\displaystyle \cup } W - {1}; where next(W, w) is the next value in the ordered set W after w. procedure Extend W,length to n is {in: W = Wk and length = Pk and n > length} {out: W = Wk → {\displaystyle \rightarrow } n and length = n} integer w, x; w, x := 1, length+1; while x <= n do Insert x into W; w := next(W,w); x := length + w; length := n; procedure Delete multiples of p from W,length is integer w; w := p; while pw <= length do w := next(W,w); while w > 1 do w := prev(W,w); Remove pw from W; where prev(W, w) is the previous value in the ordered set W before w. The algorithm can be initialized with W0 instead of W1 at the minor complication of making next(W, 1) a special case when k = 0. This a

    Read more →
  • World Congress of Universal Documentation

    World Congress of Universal Documentation

    The World Congress of Universal Documentation was held from 16 to 21 August 1937 in Paris, France. Delegates from 45 countries met to discuss means by which all of the world's information, in print, in manuscript, and in other forms, could be efficiently organized and made accessible. == The Congress in the history of information science == The Congress, held at the Trocadéro under "the auspices" of the Institut International de Bibliographie, was "the apotheosis" of a general movement in the 1930s towards the classification of the growing mass of information and the improvement of access to that information. For the first time in the history of information science, technological means were beginning to catch up with theoretical ends, and the discussions at the conference reflected that fact. Its participation in the Congress was one of the first projects of the American Documentation Institute (ADI). Participants in the conference discussed what has been more recently called "a continuously updated hypertext encyclopedia." Joseph Reagle sees many of the ideas considered at the conference as forerunners of some of the key goals and norms of Wikipedia. == Microfilm == The main resolution adopted by the congress proposed that microfilm be used to make information universally available. Watson Davis, chairman of the American delegation and president of the ADI, stated that the volume of information being produced created difficult problems of access and preservation, but that these could be solved by the use of microfilm. In his address to the Congress, Davis said: Most immediate and practical to put into operation is the microfilming of material in libraries upon demand. It will become fashionable and economical to send a potential book borrower a little strip of microfilm for his permanent possession instead of the book and then badgering him to return it before he has had a chance to use it effectively. I believe that reading machines for microfilm will become as common as typewriters in studies and laboratories. If the principal libraries and information centers of the world will cooperate in such "bibliofilm services," as they are called, if they exchange orders and have essentially uniform methods, forms for ordering, standard microfilm format and production methods and comparable if not uniform prices, the resources of any library will be placed at the disposal of any scholar or scientist anywhere in the world. All the libraries cooperating will merge into one world library without loss of identity or individuality. The world's documentation will become available to even the most isolated and individualistic scholar. The Congress included two separate exhibits on microfilm. One was of the equipment used at the Bibliothèque nationale de France and the other, coordinated by Herman H. Fussler of the University of Chicago, consisting of "an entire microfilm laboratory," complete with cameras, a darkroom, and various kinds of reading machines. Emanuel Goldberg presented a paper on an early copying camera he had invented. Other resolutions passed by the Congress concerned uniform standards for the preparation of articles, for classifying books and other documents, for indexing newspapers and periodicals, and for cooperation between libraries. == H. G. Wells == In his address to the Congress, H. G. Wells said that he thought that his idea of the "world brain" was a precursor to the ideas other delegates were proposing, and explicitly linked the projects being discussed to the work of the encyclopédistes: I am speaking of a process of mental organization throughout the world which I believe to be as inevitable as anything can be in human affairs. All the distresses and horrors of the present time are fundamentally intellectual. The world has to pull its mind together, and this [Congress] is the beginning of its efforts. Civilization is a Phoenix. It perishes in flames and even as it dies it is born again. This synthesis of knowledge upon which you are working is the necessary beginning of a new world. It is good to be meeting here in Paris where the first encyclopedia of power was made. It would be impossible to overrate our debt to Diderot and his associates. == Other participants == Participants in the Congress included authors, librarians, scholars, archivists, scientists, and editors. Some of the notable people in attendance not mentioned above were:

    Read more →