AI Assistant For Writing

AI Assistant For Writing — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Group of Governmental Experts on Lethal Autonomous Weapons Systems

  The Group of Governmental Experts on Lethal Autonomous Weapons Systems, commonly known as the GGE on LAWS, refers to a group of governmental experts established under the framework of the Convention on Certain Conventional Weapons (CCW), a United Nations arms control framework. The group examines legal, ethical, societal and moral questions that arise from the increased use of autonomous robots to carry weapons and to be programmed to engage in combat in various situations that might arise, including battles between countries, or in patrolling border areas or sensitive areas, or other similar roles. As of 18 March 2025, the Convention on Certain Conventional Weapons had 128 High Contracting Parties. In the Geneva Conventions, the term "High Contracting Parties" refers to the states that have joined the conventions and are therefore bound to uphold them. Among the countries that have joined are states with tense relations or ongoing armed conflict with one another, including Russia and Ukraine, Israel and the State of Palestine, and Pakistan and Afghanistan. == Background == In 2013, the Meeting of State Parties to the Convention on Certain Conventional Weapons agreed on a mandate on lethal autonomous weapon systems and tasked its chairperson with convening an informal Meeting of Experts to discuss issues related to emerging technologies in the area of LAWS. Those informal Meetings of Experts were then held in 2014, 2015 and 2016, and their reports fed into subsequent meetings of the High Contracting Parties. At the Fifth CCW Review Conference in 2016, the High Contracting Parties decided to establish an open-ended Group of Governmental Experts on emerging technologies in the area of LAWS, building on the earlier expert meetings. Since then, the group has been reconvened annually. In 2023, the Meeting of the High Contracting Parties to the CCW decided that the GGE on LAWS would continue its work in 2024 and 2025. The group was tasked with developing, by consensus, elements of a possible instrument, without predetermining its form, as well as other measures addressing lethal autonomous weapon systems, drawing on existing CCW protocols, earlier recommendations, state proposals, and legal, military, and technological expertise. == 2024 == In 2024, the GGE met twice, and the group was chaired by Robert in den Bosch, the Netherlands' disarmament ambassador. The 2024 Meeting of the High Contracting Parties decided that the group would meet for 10 days in 2025, in two five-day sessions, and reaffirmed its mandate to continue work by consensus on possible elements of an instrument and other measures addressing lethal autonomous weapon systems. == 2025 == At its first 2025 session, held in Geneva from 3 to 7 March 2025, the Group of Governmental Experts on Lethal Autonomous Weapon Systems discussed revisions to the chair's rolling text. The text was structured into five sections, or "boxes", though delegates held differing views on whether headings were useful or appropriate. Broadly, the discussions covered the characterization of lethal autonomous weapon systems, the application of international humanitarian law, possible prohibitions and regulations, legal review, and questions of accountability and responsibility. At its second session, held from 1 to 5 September 2025, delegations continued work on the chair's rolling text, which set out elements of a possible instrument and was organized into five thematic "boxes". == 2026 == === Developments before the 2026 session === A few weeks before the meeting, autonomous weapons drew renewed attention when the United States pressured Anthropic to revise the terms of use for its AI model Claude. Anthropic prohibited the model's use for mass domestic surveillance and for fully autonomous weapons operating without human oversight, while reports also emerged that OpenAI had reached an agreement with the U.S. Department of War for the use of its AI models, reportedly stipulating that they would not independently direct autonomous weapons where human control was required. The U.S. military nevertheless continued to use Claude during its war on Iran, and there was increasing alarm about the use of AI-assisted semi-autonomous weapons in conflicts including those in Ukraine, Sudan, Gaza, and Iran. Before the start of the sessions, Robert in den Bosch, as chair, warned that progress was urgent because technological developments were moving quickly. At the same time, although states agreed that international humanitarian law applied to LAWS, specific internationally binding standards governing such systems remained largely absent. A key divide before the session was that Russia and the United States opposed new legally binding instruments, while other states argued that new rules were necessary. According to Robert in den Bosch, the talks could lead to new rules, amendments to an existing convention, or a new treaty. === First session === From 2 to 6 March 2026, the group held its penultimate session under the group's three-year mandate. Delegations discussed the chair's rolling draft text, circulated in December 2025, on elements of a possible instrument or other measures concerning lethal autonomous weapon systems. In revised text circulated by the chair on 5 March 2026, a lethal autonomous weapon system was characterized as "a functionally integrated combination of one or more weapons and technological components, that can identify, select, and engage a target, without intervention by a human operator in the execution of these tasks". The text was divided into five boxes to structure discussion. During the session, delegates conducted a first reading of the draft text, and the chair later circulated revised language for several sections. Informal consultations were also held. According to campaign groups and participating observers, support grew during the week for moving to negotiations on the basis of the rolling text, with more than 70 states said to support that step by the end of the session, though some participants warned that attempts to bridge differences risked blurring the group's core purpose. The International Committee of the Red Cross argued that the text should not only restate existing international humanitarian law, but also clarify how those rules apply to autonomous weapons and set out additional measures tailored to the specific challenges such systems raise. Stop Killer Robots likewise emphasized the need to preserve meaningful human judgment and control over increasingly autonomous systems. During the discussions, the U.S. delegation opposed the term "human control" and reportedly proposed the alternative phrase "good faith human judgment and care". Other delegations rejected that wording as too weak, while many states continued to insist that meaningful human control over weapon systems remained essential.

  Read more →
• 

  Lynda Soderholm

  Lynda Soderholm is a physical chemist at the U.S. Department of Energy's (DOE) Argonne National Laboratory with a specialty in f-block elements. She is a senior scientist and the lead of the Actinide, Geochemistry & Separation Sciences Theme within Argonne's Chemical Sciences and Engineering Division. Her specific role is the Separation Science group leader within Heavy Element Chemistry and Separation Science (HESS), directing basic research focused on low-energy methods for isolating lanthanide and actinide elements from complex mixtures. She has made fundamental contributions to understanding f-block chemistry and characterizing f-block elements. Soderholm became a Fellow of the American Association for the Advancement of Science (AAAS) in 2013, and is also an Argonne Distinguished Fellow. == Early life and education == Soderholm was awarded her PhD in 1982 by McMaster University under the direction of Prof John Greedan. Her dissertation focused on characterizing the structural and magnetic properties of a series of ternary f-ion oxides. After graduating, she was awarded a NATO postdoctoral fellow at the Centre national de la recherche scientifique in France from 1982 until 1985. After a short postdoctoral appointment as an Argonne postdoctoral fellow she was promoted to staff scientist the same year. Over several years, she moved up the ranks, becoming a senior chemist in 2001. She was also an adjunct professor at the University of Notre Dame from 2003 until 2007. In 2021, Soderholm was appointed interim Division Director for the Chemical Sciences and Engineering Division. == Career and research == === Uncovering structure of Yttrium-123 Superconductor === Early in her career, Soderholm focused on the characterizing the magnetic and electronic behavior of compounds containing f-ions (lanthanides and actinides) with a focus on high-Tc materials, compounds that are superconducting under usually high temperatures. She was part of the research group that first determined the structure of YBa2Cu3O7. Their discovery formed the foundation for the further developments in the broad field of superconductivity. === Understanding f-ion speciation in solution === Continuing her interest in the f-elements, Soderholm shifted her focus from solid-state materials to nanoparticles and solutions, taking advantage of advances in X-ray structural probes made available by synchrotron facilities. Building on her earlier work using neutron scattering, her team became the first to discover that plutonium exists in solution as tiny, well-defined nanoparticles. This work solved a longstanding problem in understanding transport of plutonium in the environment and resulted in the development of a new, patented approach to separating plutonium during nuclear reprocessing. === Using machine learning to evaluate molecular structures === Soderholm's more recent projects use machine learning to understand the influence of complex molecular structuring in solutions, in connection with low-energy processes for separation of f-block elements from complex mixtures. == Awards and honors == University of Chicago Board of Governors' Distinguished Performance Award, 2009. Fellow of the American Association for the Advancement of Science, 2013. Argonne Distinguished Fellow, 2016 DOE materials sciences research competition for Outstanding Scientific Accomplishments in Solid State Physics, 1987. == Select publications == Beno, M. A.; Soderholm, L.; Capone, D. W., II; Hinks, D. G.; Jorgensen, J. D.; Grace, J. D.; Schuller, I. K.; Segre, C. U.; Zhang, K., Structure of the single-phase high-temperature superconductor yttrium barium copper oxide (YBa2Cu3O7−δ). Appl. Phys. Lett. 1987, 51 (1), 57–9. Soderholm, L.; Zhang, K.; Hinks, D. G.; Beno, M. A.; Jorgensen, J. D.; Segre, C. U.; Schuller, I. K., Incorporation of praseodymium in YBa2Cu3O7−δ: electronic effects on superconductivity. Nature (London) 1987, 328 (6131), 604–5. Antonio, M. R.; Williams, C. W.; Soderholm, L., Berkelium redox speciation. Radiochim. Acta 2002, 90 (12), 851–856. Soderholm, L.; Skanthakumar, S.; Neuefeind, J., Determination of actinide speciation in solution using high-energy X-ray scattering. Anal. Bioanal. Chem. 2005, 383 (1), 48–55. Forbes, T. Z.; Burns, P. C.; Skanthakumar, S.; Soderholm, L., Synthesis, structure, and magnetism of Np2O5. J. Am. Chem. Soc. 2007, 129 (10), 2760–2761. Soderholm, L.; Almond, P. M.; Skanthakumar, S.; Wilson, R. E.; Burns, P. C., The structure of the plutonium oxide nanocluster [Pu38O56Cl54(H2O)8]14-. Angew. Chem., Int. Ed. 2008, 47 (2), 298–302. Jensen, M. P.; Gorman-Lewis, D.; Aryal, B.; Paunesku, T.; Vogt, S.; Rickert, P. G.; Seifert, S.; Lai, B.; Woloschak, G. E.; Soderholm, L., An iron-dependent and transferrin-mediated cellular uptake pathway for plutonium. Nat. Chem. Biol. 2011, 7 (8), 560–565. Wilson, R. E.; Skanthakumar, S.; Soderholm, L., Separation of Plutonium Oxide Nanoparticles and Colloids. Angew. Chem., Int. Ed. 2011, 50 (47), 11234–11237. Knope, K. E.; Soderholm, L., Solution and solid-state structural chemistry of actinide hydrates and their hydrolysis and condensation products. Chem. Rev. 2013, 113 (2), 944–994. Luo, G.; Bu, W.; Mihaylov, M.; Kuzmenko, I.; Schlossman, M. L.; Soderholm, L., X-ray reflectivity reveals a nonmonotonic ion-density profile perpendicular to the surface of ErCl3 aqueous solutions. J. Phys. Chem. C 2013, 117 (37), 19082–19090. Jin, G. B.; Lin, J.; Estes, S. L.; Skanthakumar, S.; Soderholm, L., Influence of countercation hydration enthalpies on the formation of molecular complexes: A thorium-nitrate example. J. Am. Chem. Soc. 2017, 139 (49), 18003–18008. == Patents == Solvent extraction system for plutonium colloids and other oxide nano-particles, (2016).

  Read more →
• 

  POP-11

  POP-11 is a reflective, incrementally compiled programming language with many of the features of an interpreted language. It is the core language of the Poplog programming environment developed originally by the University of Sussex, and recently in the School of Computer Science at the University of Birmingham, which hosts the main Poplog website. POP-11 is an evolution of the language POP-2, developed in Edinburgh University, and features an open stack model (like Forth, among others). It is mainly procedural, but supports declarative language constructs, including a pattern matcher, and is mostly used for research and teaching in artificial intelligence, although it has features sufficient for many other classes of problems. It is often used to introduce symbolic programming techniques to programmers of more conventional languages like Pascal, who find POP syntax more familiar than that of Lisp. One of POP-11's features is that it supports first-class functions. POP-11 is the core language of the Poplog system. The availability of the compiler and compiler subroutines at run-time (a requirement for incremental compiling) gives it the ability to support a far wider range of extensions (including run-time extensions, such as adding new data-types) than would be possible using only a macro facility. This made it possible for (optional) incremental compilers to be added for Prolog, Common Lisp and Standard ML, which could be added as required to support either mixed language development or development in the second language without using any POP-11 constructs. This made it possible for Poplog to be used by teachers, researchers, and developers who were interested in only one of the languages. The most successful product developed in POP-11 was the Clementine data mining system, developed by ISL. After SPSS bought ISL, they renamed Clementine to SPSS Modeler and decided to port it to C++ and Java, and eventually succeeded with great effort, and perhaps some loss of the flexibility provided by the use of an AI language. POP-11 was for a time available only as part of an expensive commercial package (Poplog), but since about 1999 it has been freely available as part of the open-source software version of Poplog, including various added packages and teaching libraries. An online version of ELIZA using POP-11 is available at Birmingham. At the University of Sussex, David Young used POP-11 in combination with C and Fortran to develop a suite of teaching and interactive development tools for image processing and vision, and has made them available in the Popvision extension to Poplog. == Simple code examples == Here is an example of a simple POP-11 program: define Double(Source) -> Result; Source2 -> Result; enddefine; Double(123) => That prints out: 246 This one includes some list processing: define RemoveElementsMatching(Element, Source) -> Result; lvars Index; [[% for Index in Source do unless Index = Element or Index matches Element then Index; endunless; endfor; %]] -> Result; enddefine; RemoveElementsMatching("the", [[the cat sat on the mat]]) => ;;; outputs [[cat sat on mat]] RemoveElementsMatching("the", [[the cat] [sat on] the mat]) => ;;; outputs [[the cat] [sat on] mat] RemoveElementsMatching([[= cat]], [[the cat]] is a [[big cat]]) => ;;; outputs [[is a]] Examples using the POP-11 pattern matcher, which makes it relatively easy for students to learn to develop sophisticated list-processing programs without having to treat patterns as tree structures accessed by 'head' and 'tail' functions (CAR and CDR in Lisp), can be found in the online introductory tutorial. The matcher is at the heart of the SimAgent (sim_agent) toolkit. Some of the powerful features of the toolkit, such as linking pattern variables to inline code variables, would have been very difficult to implement without the incremental compiler facilities.

  Read more →
• 

  Supermind AI

  Supermind is a state-funded Chinese artificial intelligence platform that tracks scientists and researchers internationally. The platform is the flagship project of Shenzhen's International Science and Technology Information Center. It mines data from science and technology databases such as Springer, Wiley, Clarivate and Elsevier. It is intended to detect technological breakthroughs and to identify possible sources of talent as part of China's efforts to advance technologically. The platform also uses government data security and security intelligence organizations such as Peng Cheng Laboratory, the China National GeneBank, BGI Group and the Key Laboratory of New Technologies of Security Intelligence. According to Hong Kong-based Asia Times, the platform, "While not an overt espionage tool...may be used to identify key personnel who could be bribed, deceived or manipulated into divulging classified information". The Organisation for Economic Co-operation and Development (OECD) flagged the project as an incident, meaning it may be of interest to policymakers and other stakeholders. US technology group American Edge Project criticized the project as a global risk of China's security services using the platform to place agents in jobs with access to important information, recruit technical personnel, and identify targets for hacking operations.

  Read more →
• 

  IDMS

  The Integrated Database Management System (IDMS) is a network model (CODASYL) database management system for mainframes. It was first developed at BFGoodrich and later marketed by Cullinane Database Systems (renamed Cullinet in 1983). Since 1989 the product has been owned by Computer Associates (now CA Technologies), who renamed it Advantage CA-IDMS and later simply to CA IDMS. In 2018 Broadcom acquired CA Technologies, renaming it back to IDMS. == History == The roots of IDMS go back to the pioneering database management system called Integrated Data Store (IDS), developed at General Electric by a team led by Charles Bachman and first released in 1964. In the early 1960s IDS was taken from its original form, by the computer group of the BFGoodrich Chemical Division, and re-written in a language called Intermediate System Language (ISL). ISL was designed as a portable system programming language able to produce code for a variety of target machines. Since ISL was actually written in ISL, it was able to be ported to other machine architectures with relative ease, and then to produce code that would execute on them. The Chemical Division computer group had given some thought to selling copies of IDMS to other companies, but was told by management that they were not in the software products business. Eventually, a deal was struck with John Cullinane to buy the rights and market the product. Because Cullinane was required to remit royalties back to B.F. Goodrich, all add-on products were listed and billed as separate products – even if they were mandatory for the core IDMS product to work. This sometimes confused customers. The original platforms were the GE 235 computer and GE DATANET-30 message switching computer: later the product was ported to IBM mainframes and to DEC and ICL hardware. The IBM-ported version runs on IBM mainframe systems (System/360, System/370, System/390, zSeries, System z9). In the mid-1980s, it was claimed that some 2,500 IDMS licenses had been sold. Users included the Strategic Air Command, Ford of Canada, Ford of Europe, Jaguar Cars, Clarks Shoes UK, Axa/PPP, MAPFRE, Royal Insurance, Tesco, Manulife, Hudson's Bay Company, Cleveland Clinic, Bank of Canada, General Electric, Aetna and BT in the UK. A version for use on the Digital Equipment Corporation PDP-11 series of computers was sold to DEC and was marketed as DBMS-11. In 1976 the source code was licensed to ICL, who ported the software to run on their 2900 series mainframes, and subsequently also on the older 1900 range. ICL continued development of the software independently of Cullinane, selling the original ported product under the name ICL 2900 IDMS and an enhanced version as IDMSX. In this form it was used by many large UK users, an example being the Pay-As-You-Earn system operated by Inland Revenue. Many of these IDMSX systems for UK Government were still running in 2013. In the early to mid-1980s, relational database management systems started to become more popular, encouraged by increasing hardware power and the move to minicomputers and client–server architecture. Relational databases offered improved development productivity over CODASYL systems, and the traditional objections based on poor performance were slowly diminishing. Cullinet attempted to continue competing against IBM's DB2 and other relational databases by developing a relational front-end and a range of productivity tools. These included Automatic System Facility (ASF), which made use of a pre-existing IDMS feature called LRF (Logical Record Facility). ASF was a fill-in-the-blanks database generator that would also develop a mini-application to maintain the tables. It is difficult to judge whether such features may have been successful in extending the selling life of the product, but they made little impact in the long term. Those users who stayed with IDMS were primarily interested in its high performance, not in its relational capabilities. It was widely recognized (helped by a high-profile campaign by E. F. Codd, the father of the relational model) that there was a significant difference between a relational database and a network database with a relational veneer. In 1989 Computer Associates continued after Cullinet acquisition with the development and released Release 12.0 with full SQL in 1992–93. CA Technologies continued to market and support the CA IDMS and enhanced IDMS in subsequent releases by TCP/IP support, two phase commit support, XML publishing, zIIP specialty processor support, Web-enabled access in combination with CA IDMS Server, SQL Option and GUI database administration via CA IDMS Visual DBA tool. CA-IDMS systems are today still running businesses worldwide. Many customers have opted to web-enable their applications via the CA-IDMS SQL Option which is part of CA Technologies' Dual Database Strategy. == Integrated Data Dictionary == One of the sophisticated features of IDMS was its built-in Integrated data dictionary (IDD). The IDD was primarily developed to maintain database definitions. It was itself an IDMS database. DBAs (database administrators) and other users interfaced with the IDD using a language called Data Dictionary Definition Language (DDDL). IDD was also used to store definitions and code for other products in the IDMS family such as ADS/Online and IDMS-DC. IDD's power was that it was extensible and could be used to create definitions of just about anything. Some companies used it to develop in-house documentation. == Overview == === Logical Data Model === The data model offered to users is the CODASYL network model. The main structuring concepts in this model are records and sets. Records essentially follow the COBOL pattern, consisting of fields of different types: this allows complex internal structure such as repeating items and repeating groups. The most distinctive structuring concept in the Codasyl model is the set. Not to be confused with a mathematical set, a Codasyl set represents a one-to-many relationship between records: one owner, many members. The fact that a record can be a member in many different sets is the key factor that distinguishes the network model from the earlier hierarchical model. As with records, each set belongs to a named set type (different set types model different logical relationships). Sets are in fact ordered, and the sequence of records in a set can be used to convey information. A record can participate as an owner and member of any number of sets. Records have identity, the identity being represented by a value known as a database key. In IDMS, as in most other Codasyl implementations, the database key is directly related to the physical address of the record on disk. Database keys are also used as pointers to implement sets in the form of linked lists and trees. This close correspondence between the logical model and the physical implementation (which is not a strictly necessary part of the Codasyl model, but was a characteristic of all successful implementations) is responsible for the efficiency of database retrieval, but also makes operations such as database loading and restructuring rather expensive. Records can be accessed directly by database key, by following set relationships, or by direct access using key values. Initially the only direct access was through hashing, a mechanism known in the Codasyl model as CALC access. In IDMS, CALC access is implemented through an internal set, linking all records that share the same hash value to an owner record that occupies the first few bytes of every disk page. In subsequent years, some versions of IDMS added the ability to access records using BTree-like indexes. === Storage === IDMS organizes its databases as a series of files. These files are mapped and pre-formatted into so-called areas. The areas are subdivided into pages which correspond to physical blocks on the disk. The database records are stored within these blocks. The DBA allocates a fixed number of pages in a file for each area. The DBA then defines which records are to be stored in each area, and details of how they are to be stored. IDMS intersperses special space-allocation pages throughout the database. These pages are used to keep track of the free space available in each page in the database. To reduce I/O requirements, the free space is only tracked for all pages when the free space for the area falls below 30%. Four methods are available for storing records in an IDMS database: Direct, Sequential, CALC, and VIA. The Fujitsu/ICL IDMSX version extends this with two more methods, Page Direct, and Random. In direct mode the target database key is specified by the user and is stored as close as possible to that DB key, with the actual DB key on which the record is stored being returned to the application program. Sequential placement (not to be confused with indexed sequential), simply places each new record at the end of the area. This option is rarely used. CALC uses a hashing algo

  Read more →
• 

  Toy problem

  In scientific disciplines, a toy problem or a puzzlelike problem is a problem that is not of immediate scientific interest, yet is used as an expository device to illustrate a trait that may be shared by other, more complicated, instances of the problem, or as a way to explain a particular, more general, problem solving technique. A toy problem is useful to test and demonstrate methodologies. Researchers can use toy problems to compare the performance of different algorithms. They are also good for game designing. For instance, while engineering a large system, the large problem is often broken down into many smaller toy problems which have been well understood in detail. Often these problems distill a few important aspects of complicated problems so that they can be studied in isolation. Toy problems are thus often very useful in providing intuition about specific phenomena in more complicated problems. As an example, in the field of artificial intelligence, classical puzzles, games and problems are often used as toy problems. These include sliding-block puzzles, N-Queens problem, missionaries and cannibals problem, tic-tac-toe, chess, Tower of Hanoi and others.

  Read more →
• 

  Inauthentic text

  An inauthentic text is a computer-generated expository document meant to appear as genuine, but which is actually meaningless. Frequently they are created in order to be intermixed with genuine documents and thus manipulate the results of search engines, as with Spam blogs. They are also carried along in email in order to fool spam filters by giving the spam the superficial characteristics of legitimate text. Sometimes nonsensical documents are created with computer assistance for humorous effect, as with Dissociated press or Flarf poetry. They have also been used to challenge the veracity of a publication—MIT students submitted papers generated by a computer program called SCIgen to a conference, where they were initially accepted. This led the students to claim that the bar for submissions was too low. With the amount of computer generated text outpacing the ability of people to humans to curate it, there needs some means of distinguishing between the two. Yet automated approaches to determining absolutely whether a text is authentic or not face intrinsic challenges of semantics. Noam Chomsky coined the phrase "Colorless green ideas sleep furiously" giving an example of grammatically correct, but semantically incoherent sentence; some will point out that in certain contexts one could give this sentence (or any phrase) meaning. The first group to use the expression in this regard can be found below from Indiana University. Their work explains in detail an attempt to detect inauthentic texts and identify pernicious problems of inauthentic texts in cyberspace. The site has a means of submitting text that assesses, based on supervised learning, whether a corpus is inauthentic or not. Many users have submitted incorrect types of data and have correspondingly commented on the scores. This application is meant for a specific kind of data; therefore, submitting, say, an email, will not return a meaningful score.

  Read more →
• 

  NASA AI Assisted-Air Quality Monitoring Project

  The NASA Expert-System Ion Trap Mass Spectrometer (ES-ITMS) Project was a public-private partnership to develop an artificial intelligence assisted, air quality monitoring system and was qualified for use on the Space Shuttle. The partnership was also the first cost and intellectual property shared public-partnership implemented by NASA, which used the commercial Research and Development Limited Partnership (RDLP) model that had been adopted by the Reagan Administration for Department of Defense semiconductor development, and recommended for use by NASA for space commercialization. The project partners included NASA, the University of Florida and Finnigan MAT Corporation, was organized and administered by the NASA Joint Enterprise Institute (subsequently NASA Joint Sponsored Program) and ran from 1988 through 1990. The partnership concluded final testing in 1991, generating four patents, expert system software and application protocol reports. The system was space qualified for use on the Shuttle and elements of the ES-ITMS system were integrated into the product Improvements for Finnigan MAT corporation. The success of the partnership lead NASA to create a pilot program to develop partnership business models as an ongoing management practice. == Purpose and objectives == The need to monitor air quality in confined spaces represented an increasing challenge for NASA's planned space missions and private sector facility managers facing the increased scrutiny of possible air contaminants. Up to the early 1980's, air quality monitors generally required large spaces and human technicians to interpret readings. This created a need for miniaturized air quality monitors that could generate reliable and accurate analytic results without on-site technician presence. NASA initiated projects to develop..."mobile and/or portable mass spectrometers" that evaluated the "tradeoff between instrumentation capabilities and space, weight and power considerations." NASA selected a "commercial ITMS instrument capable of generating electron ionization, chemical ionization and mass spectrometry data", to develop a linked expert system to accomplish analysis without human intervention. The commercial instrumentation was from Finnigan MAT corporation while the scientific expertise to support expert system development was available at the University of Florida. The project managers at NASA Ames created a single, integrated project using the RDLP model with objectives to: Develop AI/expert system software for instrument control (NASA's role) Expand sensitivity, selectivity and speed of the spectrometer (Univ Florida role) Expand the spectrometer analytic capability and automate the screening (Finnigan role) == Membership == The partnership included seven specialists from five member organizations: Federal Government National Aeronautics and Space Administration (NASA) NASA Ames Research Center (ARC) NASA Kennedy Space Center (KSC) Commercial Finnigan MAT Corporation (Thermo-Fisher Scientific) TGS Technology, Inc. Research Management University of Florida == Organization, management and administration == The technical project was organized into two development teams, one located in at the NASA Ames Research Center covering expert systems and analytic capabilities and one in Florida covering improved sensitivity and testing. The partnership management and administration was provided by a non-profit, partnership support organization: the Joint Enterprise Institute operating through San Francisco State University Foundation (SFSUF) with a NASA employee liaison, Syed Shariq. == Public-private partnership == The partnership structure was as a prototype test of a pilot NASA program to develop public-private partnership business models. The pilot program was known as the NASA Joint Sponsored Research Program (JSRP), which operated as the NASA Joint Enterprise Institute between 1988 and 1991. The partnership was the first public-private, research and development partnership implemented by NASA in response to national policy shifts to increase technology transfer and space commercialization. The partnership structure included a two year technology development and testing plan that cost $610,000, of which NASA funded $310,000, Finnigan $175,000 and the University of Florida $95,000. == Results and commercialization == The project generated patents (4), software (2) and application protocol reports (8). NASA gained use of the patents and jointly development software while Finnigan received commercial utilization rights. The results were commercialized within eighteen months of project completion. == Recognition == NASA recognized the project as a space qualified instrument. Its achievements were reported to the NASA Administrator, directly leading to establishment of the agency-wide Joint Sponsored Research Program.

  Read more →
• 

  Gcore

  Gcore is an edge AI, cloud, network, and security company headquartered in Luxembourg. Founded in 2014, the company provides low-latency services to industries including finance, healthcare, manufacturing, gaming, media and telecommunications internationally. As of March 2024, its global network includes over 180 Points of Presence (PoPs) across six continents. == History == Gcore was founded in 2014 in Luxembourg. The company built its own content delivery network, originally designed for the needs of the gaming industry. In 2016, Gcore's infrastructure expanded to multiple regions that were underserved by hyperscale cloud providers. In 2020, the company formed partnerships with Intel and Equinix. In 2022, Gcore launched the European AI Cloud, providing access to infrastructure for machine learning tasks. In March 2024, Gcore announced the acquisition of a web application and API protection (WAAP) solution from StackPath. In April 2024, Gcore received a commendation in the Industry Innovation category at the NVIDIA Partner Network Awards EMEA for developing the first speech-to-text technology for Luxembourgish, using the LuxemBERT AI model. In May 2024, Philipp Rösler, former vice-chancellor of Germany and federal minister of health joined the Gcore board. In July 2024, Gcore raised $60 million in a Series A funding round, marking the company's first external investment since its founding. In August 2024, Gcore was recognized as a Major Player in the IDC MarketScape report for European public cloud Infrastructure (IaaS) 2024 by IDC, the global market intelligence firm. In May 2025, Feiyu Xu became a member of the Gcore advisory board. == Network infrastructure == According to the company's website, Gcore has network locations in six continents: Europe, North America, Asia, South America, Africa, and Australia with over 14,000 peering partners and a network capacity exceeding 200 Tbps. According to a 2025 review by Geekflare, Gcore's CDN achieved an average global response time of around 30 milliseconds. Gcore offers AI cloud clusters, including a generative AI cluster with Nvidia GPUs in Luxembourg and additional sites in the Netherlands and Wales, as part of its European AI infrastructure. == Products and services == Gcore offers a range of services, including content delivery network (CDN), cloud computing,virtual machines, bare-metal servers, object storage AI infrastructure and inference, Kubernetes, video streaming, DDoS mitigation, web application and API protection (WAAP), Domain Name System (DNS). Gcore provides AI services and GPU cloud infrastructure to support model development, training, fine-tuning, and inference. In January 2025, the company introduced Everywhere Inference, a serverless inference solution that enables AI model deployment. == Controversies == Correctiv and Tageszeitung reported that Gcore supported the distribution of the TV network RT until April 2023, which has been under sanctions by the EU since March 2022. However, Gcore denies these allegations. == Collaborations == In 2024, Gcore and Qareeb Data Centres, a data center provider in the Middle East, launched a collaboration to integrate Gcore's AI, cloud and edge services across data centers in multiple Middle Eastern countries. In June 2025, Gcore joined the SmartSpires initiative, a €3.1 million smart city project co-funded by the Connecting Europe Facility. The three-year programme is coordinated by a public–private consortium including 5SKYE, the Luxembourg Institute of Science and Technology (LIST), Orange Luxembourg, and Gcore. The project aims to transform the Belval campus into a smart city by deploying 5G-enabled smart towers that integrate edge computing, artificial intelligence and IoT services. Within the consortium, Gcore acts as project coordinator and is responsible for the deployment of the edge infrastructure.

  Read more →
• 

  AI Overviews

  AI Overviews is an artificial intelligence (AI) feature integrated into Google Search that produces AI-generated summaries of search results. The feature has been criticized for its inaccuracy and for reducing website traffic. == History and development == AI Overviews were first introduced as part of Google's Search Generative Experience (SGE), which was unveiled at the Google I/O conference in May 2023. In May 2024 at Google I/O 2024, the feature was rebranded as AI Overviews and launched in the United States. The introduction of AI Overviews was seen as a strategic move to compete with other generative AI advancements, including OpenAI's ChatGPT. By August 2024, AI Overviews was rolled out to several other countries, including the United Kingdom, India, Japan, Brazil, Mexico, and Indonesia, with support for multiple languages. In October 2024, Google expanded the feature globally, making it available in over 100 countries. In December 2024, Botify x Demandsphere released findings stating that when AI Overviews and featured snippets appear together on the search engine results page, they take up approximately 67.1% of the screen on desktop and 75.7% on mobile. Even if content is ranking in the #1 position, it may not be visible to consumers if other visual elements on the results page are more prominent. In March 2025, Google started testing an "AI Mode", where the search results page is AI-generated. The company was also considering adding advertisements to the AI Mode, as they already exist in AI Overviews. As of May 2025, AI Overviews are available in over 200 countries and territories and in more than 40 languages. As of March 2026, Google AI Overviews appear on more than 48% of total Google Search queries, compared to just 6.49% in the previous year (58% year-over-year growth). == Functionality == The AI Overviews feature uses large language models to generate summaries from web content. The overviews are designed to be concise, providing a snapshot of relevant information about the queried topic. Google allows users to adjust the language complexity in summaries, offering both simplified and detailed options. The overviews also include links to sources. According to a June 2025 study by Semrush, the most cited source is Quora, followed by Reddit. == Reception == The feature has faced criticism for inaccuracies, including instances where erroneous or nonsensical content was generated. Depending on what is searched for, the overview may also consist of hallucinated content, such as when searching for idioms that do not exist. In May 2024, Google temporarily restricted the AI tool after it provided suggestions that were seen as nonsensical and harmful, such as telling users to eat rocks or apply glue on pizza. Concerns were also raised by content publishers, who feared a decline in web traffic as users relied on the summaries instead of visiting source websites. A Google patent from 2026 raised the concern of webmasters that Google could entirely replace the landing page of websites by an AI optimized copy of the website in its results. There is also apprehension about the ethical implications of AI-driven content aggregation, including its impact on intellectual property rights and the visibility of smaller content providers. The European Commission announced in December 2025 that they were investigating whether AI Overviews breached European competition law. In response, Google has stated its commitment to improve content validation and refine the algorithms used to filter unreliable information. Google implemented measures to prioritize link placement within AI Overviews, aiming to balance user convenience with the needs of content creators. In January 2026, Google restricted AI Overviews on certain health-related searches following an investigation by The Guardian. == Lawsuits == On February 24, 2025, Chegg sued Alphabet over the AI Overviews feature, claiming that it was leading to students preferring "low-quality, unverified AI summaries", thus violating antitrust law. Chegg also said it was considering either a sale or a take-private transaction. In September 2025, Penske Media Corporation, the publisher of Rolling Stone and The Hollywood Reporter, sued Google, claiming that AI Overviews illegally regurgitate content from their websites and drive off potential site visitors by always appearing on top of the search results while leaving little incentive to see the linked sources. The company stated that "the future of digital media and [...] its integrity [...] is threatened by Google's current actions", alleging that 20% of searches that link to Penske-owned websites show AI Overviews and that the figure is expected to rise. Google spokesperson José Castañeda called the claims "meritless" and stated that "AI Overviews send traffic to a greater diversity of sites." In 2026, Canadian musician Ashley MacIsaac filed a lawsuit against Google claiming that the AI Overview feature had wrongly stated that MacIsaac had been convicted of numerous criminal offences and was on the sex offender registry. He claims this incorrect information led to the cancellation of a December 2025 gig organized by the Sipekne'katik First Nation.

  Read more →
• 

  Astrostatistics

  Astrostatistics is a discipline which spans astrophysics, statistical analysis and data mining. It is used to process the vast amount of data produced by automated scanning of the cosmos, to characterize complex datasets, and to link astronomical data to astrophysical theory. Many branches of statistics are involved in astronomical analysis including nonparametrics, multivariate regression and multivariate classification, time series analysis, and especially Bayesian inference. The field is closely related to astroinformatics.

  Read more →
• 

  Schema-agnostic databases

  Schema-agnostic databases or vocabulary-independent databases aim at supporting users to be abstracted from the representation of the data, supporting the automatic semantic matching between queries and databases. Schema-agnosticism is the property of a database of mapping a query issued with the user terminology and structure, automatically mapping it to the dataset vocabulary. The increase in the size and in the semantic heterogeneity of database schemas bring new requirements for users querying and searching structured data. At this scale it can become unfeasible for data consumers to be familiar with the representation of the data in order to query it. At the center of this discussion is the semantic gap between users and databases, which becomes more central as the scale and complexity of the data grows. == Description == The evolution of data environments towards the consumption of data from multiple data sources and the growth in the schema size, complexity, dynamicity and decentralisation (SCoDD) of schemas increases the complexity of contemporary data management. The SCoDD trend emerges as a central data management concern in Big Data scenarios, where users and applications have a demand for more complete data, produced by independent data sources, under different semantic assumptions and contexts of use, which is the typical scenario for Semantic Web Data applications. The evolution of databases in the direction of heterogeneous data environments strongly impacts the usability, semiotics and semantic assumptions behind existing data accessibility methods such as structured queries, keyword-based search and visual query systems. With schema-less databases containing potentially millions of dynamically changing attributes, it becomes unfeasible for some users to become aware of the 'schema' or vocabulary in order to query the database. At this scale, the effort in understanding the schema in order to build a structured query can become prohibitive. == Schema-agnostic queries == Schema-agnostic queries can be defined as query approaches over structured databases which allow users satisfying complex information needs without the understanding of the representation (schema) of the database. Similarly, Tran et al. defines it as "search approaches, which do not require users to know the schema underlying the data". Approaches such as keyword-based search over databases allow users to query databases without employing structured queries. However, as discussed by Tran et al.: "From these points, users however have to do further navigation and exploration to address complex information needs. Unlike keyword search used on the Web, which focuses on simple needs, the keyword search elaborated here is used to obtain more complex results. Instead of a single set of resources, the goal is to compute complex sets of resources and their relations." The development of approaches to support natural language interfaces (NLI) over databases have aimed towards the goal of schema-agnostic queries. Complementarily, some approaches based on keyword search have targeted keyword-based queries which express more complex information needs. Other approaches have explored the construction of structured queries over databases where schema constraints can be relaxed. All these approaches (natural language, keyword-based search and structured queries) have targeted different degrees of sophistication in addressing the problem of supporting a flexible semantic matching between queries and data, which vary from the completely absence of the semantic concern to more principled semantic models. While the demand for schema-agnosticism has been an implicit requirement across semantic search and natural language query systems over structured data, it is not sufficiently individuated as a concept and as a necessary requirement for contemporary database management systems. Recent works have started to define and model the semantic aspects involved on schema-agnostic queries. === Schema-agnostic structured queries === Consist of schema-agnostic queries following the syntax of a structured standard (for example SQL, SPARQL). The syntax and semantics of operators are maintained, while different terminologies are used. ==== Example 1 ==== SELECT ?y { BillClinton hasDaughter ?x . ?x marriedTo ?y . } which maps to the following SPARQL query in the dataset vocabulary: ==== Example 2 ==== which maps to the following SPARQL query in the dataset vocabulary: === Schema-agnostic keyword queries === Consist of schema-agnostic queries using keyword queries. In this case the syntax and semantics of operators are different from the structured query syntax. ==== Example ==== "Bill Clinton daughter married to" "Books by William Goldman with more than 300 pages" == Semantic complexity == As of 2016 the concept of schema-agnostic queries has been developed primarily in academia. Most of schema-agnostic query systems have been investigated in the context of Natural Language Interfaces over databases or over the Semantic Web. These works explore the application of semantic parsing techniques over large, heterogeneous and schema-less databases. More recently, the individuation of the concept of schema-agnostic query systems and databases have appeared more explicitly within the literature. Freitas et al. provide a probabilistic model on the semantic complexity of mapping schema-agnostic queries.

  Read more →
• 

  PlantUML

  PlantUML is an open-source tool allowing users to create diagrams from a plain text language. Besides various UML diagrams, PlantUML has support for various other software development related formats (such as Archimate, Block diagram, BPMN, C4, Computer network diagram, ERD, Gantt chart, Mind map, and WBD), as well as visualisation of JSON and YAML files. The language of PlantUML is an example of a domain-specific language. Besides its own DSL, PlantUML also understands AsciiMath, Creole, DOT, and LaTeX. It uses Graphviz software to lay out its diagrams and Tikz for LaTeX support. Images can be output as PNG, SVG, LaTeX and even ASCII art. PlantUML has also been used to allow blind people to design and read UML diagrams. == Applications that use PlantUML == There are various extensions or add-ons that incorporate PlantUML. Atom has a community maintained PlantUML syntax highlighter and viewer. Confluence wiki has a PlantUML plug-in for Confluence Server, which renders diagrams on-the-fly during a page reload. There is an additional PlantUML plug-in for Confluence Cloud. Doxygen integrates diagrams for which sources are provided after the startuml command. Eclipse has a PlantUML plug-in. Google Docs has an add-on called PlantUML Gizmo that works with the PlantUML.com server. IntelliJ IDEA can create and display diagrams embedded into Markdown (built-in) or in standalone files (using a plugin). LaTeX using the Tikz package has limited support for PlantUML. LibreOffice has Libo_PlantUML extension to use PlantUML diagrams. MediaWiki has a PlantUML plug-in which renders diagrams in pages as SVG or PNG. Microsoft Word can use PlantUML diagrams via a Word Template Add-in. There is an additional Visual Studio Tools for Office add-in called PlantUML Gizmo that works in a similar fashion. NetBeans has a PlantUML plug-in. Notepad++ has a PlantUML plug-in. Obsidian has a PlantUML plug-in. Org-mode has a PlantUML org-babel support. Rider has a PlantUML plug-in. Sublime Text has a PlantUML package called PlantUmlDiagrams for Sublime Text 2 and 3. Visual Studio Code has various PlantUML extensions on its marketplace, most popular being PlantUML by jebbs. Vnote open source notetaking markdown application has built in PlantUML support. Xcode has a community maintained Source Editor Extension to generate and view PlantUML class diagrams from Swift source code. == Text format to communicate UML at source code level == PlantUML uses well-formed and human-readable code to render the diagrams. There are other text formats for UML modelling, but PlantUML supports many diagram types, and does not need an explicit layout, though it is possible to tweak the diagrams if necessary. +--------------------------------------+ | TEDx Talks Recommendation | | System | +--------------------------------------+ | +----------------------------------+ | | | Visitor | | | +----------------------------------+ | | | + View Recommended Talks | | | | + Search Talks | | | +----------------------------------+ | +--------------------------------------+ | | V +--------------------------------------+ | Authenticated User | +--------------------------------------+ | +----------------------------------+ | | | User | | | +----------------------------------+ | | | + View Recommended Talks | | | | + Search Talks | | | | + Save Favorite Talks | | | +----------------------------------+ | +--------------------------------------+ | | V +--------------------------------------+ | Admin | +--------------------------------------+ | +----------------------------------+ | | | Admin | | | +----------------------------------+ | | | + CRUD Talks | | | | + Manage Users | | | +----------------------------------+ | +--------------------------------------+

  Read more →
• 

  Video Super Resolution

  RTX Video Super Resolution (RTX VSR) is a video scaling feature by Nvidia. It was released on February 28, 2023. == History == The feature was first unveiled during CES 2023 as RTX Video Super Resolution. It uses the on-board Tensor Cores to upscale browser video content in real time. Video Super Resolution was initially only available on RTX 30 and 40 series GPUs, while support for 20 series GPUs was added afterwards; it is now available on all Nvidia RTX-branded GPUs. The feature supports input resolutions from 360p to 1440p and a max output of 4K and comes without support for HDR content although that could be likely added in the future. Nvidia released RTX Video Super Resolution 1.5 with improved video quality and RTX 20 series support on October 17, 2023. == Reception == According to ComputerBase, although "the algorithm is not yet working flawlessly", the feature is "overall recommendable".

  Read more →
• 

  Statistical learning theory

  Statistical learning theory is a framework for machine learning drawing from the fields of statistics and functional analysis. Statistical learning theory deals with the statistical inference problem of finding a predictive function based on data. Statistical learning theory has led to successful applications in fields such as computer vision, speech recognition, and bioinformatics. == Introduction == The goals of learning are understanding and prediction. Learning falls into many categories, including supervised learning, unsupervised learning, online learning, and reinforcement learning. From the perspective of statistical learning theory, supervised learning is best understood. Supervised learning involves learning from a training set of data. Every point in the training is an input–output pair, where the input maps to an output. The learning problem consists of inferring the function that maps between the input and the output, such that the learned function can be used to predict the output from future input. Depending on the type of output, supervised learning problems are either problems of regression or problems of classification. If the output takes a continuous range of values, it is a regression problem. Using Ohm's law as an example, a regression could be performed with voltage as input and current as an output. The regression would find the functional relationship between voltage and current to be R {\displaystyle R} , such that V = I R {\displaystyle V=IR} Classification problems are those for which the output will be an element from a discrete set of labels. Classification is very common for machine learning applications. In facial recognition, for instance, a picture of a person's face would be the input, and the output label would be that person's name. The input would be represented by a large multidimensional vector whose elements represent pixels in the picture. After learning a function based on the training set data, that function is validated on a test set of data, data that did not appear in the training set. == Formal description == Take X {\displaystyle X} to be the vector space of all possible inputs, and Y {\displaystyle Y} to be the vector space of all possible outputs. Statistical learning theory takes the perspective that there is some unknown probability distribution over the product space Z = X × Y {\displaystyle Z=X\times Y} , i.e. there exists some unknown p ( z ) = p ( x , y ) {\displaystyle p(z)=p(\mathbf {x} ,y)} . The training set is made up of n {\displaystyle n} samples from this probability distribution, and is notated S = { ( x 1 , y 1 ) , … , ( x n , y n ) } = { z 1 , … , z n } {\displaystyle S=\{(\mathbf {x} _{1},y_{1}),\dots ,(\mathbf {x} _{n},y_{n})\}=\{\mathbf {z} _{1},\dots ,\mathbf {z} _{n}\}} Every x i {\displaystyle \mathbf {x} _{i}} is an input vector from the training data, and y i {\displaystyle y_{i}} is the output that corresponds to it. In this formalism, the inference problem consists of finding a function f : X → Y {\displaystyle f:X\to Y} such that f ( x ) ∼ y {\displaystyle f(\mathbf {x} )\sim y} . Let H {\displaystyle {\mathcal {H}}} be a space of functions f : X → Y {\displaystyle f:X\to Y} called the hypothesis space. The hypothesis space is the space of functions the algorithm will search through. Let V ( f ( x ) , y ) {\displaystyle V(f(\mathbf {x} ),y)} be the loss function, a metric for the difference between the predicted value f ( x ) {\displaystyle f(\mathbf {x} )} and the actual value y {\displaystyle y} . The expected risk is defined to be I [ f ] = ∫ X × Y V ( f ( x ) , y ) p ( x , y ) d x d y {\displaystyle I[f]=\int _{X\times Y}V(f(\mathbf {x} ),y)\,p(\mathbf {x} ,y)\,d\mathbf {x} \,dy} The target function, the best possible function f {\displaystyle f} that can be chosen, is given by the f {\displaystyle f} that satisfies f = argmin h ∈ H ⁡ I [ h ] {\displaystyle f=\mathop {\operatorname {argmin} } _{h\in {\mathcal {H}}}I[h]} Because the probability distribution p ( x , y ) {\displaystyle p(\mathbf {x} ,y)} is unknown, a proxy measure for the expected risk must be used. This measure is based on the training set, a sample from this unknown probability distribution. It is called the empirical risk I S [ f ] = 1 n ∑ i = 1 n V ( f ( x i ) , y i ) {\displaystyle I_{S}[f]={\frac {1}{n}}\sum _{i=1}^{n}V(f(\mathbf {x} _{i}),y_{i})} A learning algorithm that chooses the function f S {\displaystyle f_{S}} that minimizes the empirical risk is called empirical risk minimization. == Loss functions == The choice of loss function is a determining factor on the function f S {\displaystyle f_{S}} that will be chosen by the learning algorithm. The loss function also affects the convergence rate for an algorithm. It is important for the loss function to be convex. Different loss functions are used depending on whether the problem is one of regression or one of classification. === Regression === The most common loss function for regression is the square loss function (also known as the L2-norm). This familiar loss function is used in Ordinary Least Squares regression. The form is: V ( f ( x ) , y ) = ( y − f ( x ) ) 2 {\displaystyle V(f(\mathbf {x} ),y)=(y-f(\mathbf {x} ))^{2}} The absolute value loss (also known as the L1-norm) is also sometimes used: V ( f ( x ) , y ) = | y − f ( x ) | {\displaystyle V(f(\mathbf {x} ),y)=|y-f(\mathbf {x} )|} === Classification === In some sense the 0-1 indicator function is the most natural loss function for classification. It takes the value 0 if the predicted output is the same as the actual output, and it takes the value 1 if the predicted output is different from the actual output. For binary classification with Y = { − 1 , 1 } {\displaystyle Y=\{-1,1\}} , this is: V ( f ( x ) , y ) = θ ( − y f ( x ) ) {\displaystyle V(f(\mathbf {x} ),y)=\theta (-yf(\mathbf {x} ))} where θ {\displaystyle \theta } is the Heaviside step function. == Regularization == In machine learning problems, a major problem that arises is that of overfitting. Because learning is a prediction problem, the goal is not to find a function that most closely fits the (previously observed) data, but to find one that will most accurately predict output from future input. Empirical risk minimization runs this risk of overfitting: finding a function that matches the data exactly but does not predict future output well. Overfitting is symptomatic of unstable solutions; a small perturbation in the training set data would cause a large variation in the learned function. It can be shown that if the stability for the solution can be guaranteed, generalization and consistency are guaranteed as well. Regularization can solve the overfitting problem and give the problem stability. Regularization can be accomplished by restricting the hypothesis space H {\displaystyle {\mathcal {H}}} . A common example would be restricting H {\displaystyle {\mathcal {H}}} to linear functions: this can be seen as a reduction to the standard problem of linear regression. H {\displaystyle {\mathcal {H}}} could also be restricted to polynomial of degree p {\displaystyle p} , exponentials, or bounded functions on L1. Restriction of the hypothesis space avoids overfitting because the form of the potential functions are limited, and so does not allow for the choice of a function that gives empirical risk arbitrarily close to zero. One example of regularization is Tikhonov regularization. This consists of minimizing 1 n ∑ i = 1 n V ( f ( x i ) , y i ) + γ ‖ f ‖ H 2 {\displaystyle {\frac {1}{n}}\sum _{i=1}^{n}V(f(\mathbf {x} _{i}),y_{i})+\gamma \left\|f\right\|_{\mathcal {H}}^{2}} where γ {\displaystyle \gamma } is a fixed and positive parameter, the regularization parameter. Tikhonov regularization ensures existence, uniqueness, and stability of the solution. == Bounding empirical risk == Consider a binary classifier f : X → { 0 , 1 } {\displaystyle f:{\mathcal {X}}\to \{0,1\}} . We can apply Hoeffding's inequality to bound the probability that the empirical risk deviates from the true risk to be a Sub-Gaussian distribution. P ( | R ^ ( f ) − R ( f ) | ≥ ϵ ) ≤ 2 e − 2 n ϵ 2 {\displaystyle \mathbb {P} (|{\hat {R}}(f)-R(f)|\geq \epsilon )\leq 2e^{-2n\epsilon ^{2}}} But generally, when we do empirical risk minimization, we are not given a classifier; we must choose it. Therefore, a more useful result is to bound the probability of the supremum of the difference over the whole class. P ( sup f ∈ F | R ^ ( f ) − R ( f ) | ≥ ϵ ) ≤ 2 S ( F , n ) e − n ϵ 2 / 8 ≈ n d e − n ϵ 2 / 8 {\displaystyle \mathbb {P} {\bigg (}\sup _{f\in {\mathcal {F}}}|{\hat {R}}(f)-R(f)|\geq \epsilon {\bigg )}\leq 2S({\mathcal {F}},n)e^{-n\epsilon ^{2}/8}\approx n^{d}e^{-n\epsilon ^{2}/8}} where S ( F , n ) {\displaystyle S({\mathcal {F}},n)} is the shattering number and n {\displaystyle n} is the number of samples in your dataset. The exponential term comes from Hoeffding but there is an extra cost of taking the supremum over the whole cla

  Read more →