AI Assistant Intellij

AI Assistant Intellij — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Deep learning in photoacoustic imaging

  Photoacoustic imaging (PA) is based on the photoacoustic effect, in which optical absorption causes a rise in temperature, which causes a subsequent rise in pressure via thermo-elastic expansion. This pressure rise propagates through the tissue and is sensed via ultrasonic transducers. Due to the proportionality between the optical absorption, the rise in temperature, and the rise in pressure, the ultrasound pressure wave signal can be used to quantify the original optical energy deposition within the tissue. Photoacoustic imaging has applications of deep learning in both photoacoustic computed tomography (PACT) and photoacoustic microscopy (PAM). PACT utilizes wide-field optical excitation and an array of unfocused ultrasound transducers. Similar to other computed tomography methods, the sample is imaged at multiple view angles, which are then used to perform an inverse reconstruction algorithm based on the detection geometry (typically through universal backprojection, modified delay-and-sum, or time reversal ) to elicit the initial pressure distribution within the tissue. PAM on the other hand uses focused ultrasound detection combined with weakly focused optical excitation (acoustic resolution PAM or AR-PAM) or tightly focused optical excitation (optical resolution PAM or OR-PAM). PAM typically captures images point-by-point via a mechanical raster scanning pattern. At each scanned point, the acoustic time-of-flight provides axial resolution while the acoustic focusing yields lateral resolution. == Applications of deep learning in PACT == The first application of deep learning in PACT was by Reiter et al. in which a deep neural network was trained to learn spatial impulse responses and locate photoacoustic point sources. The resulting mean axial and lateral point location errors on 2,412 of their randomly selected test images were 0.28 mm and 0.37 mm respectively. After this initial implementation, the applications of deep learning in PACT have branched out primarily into removing artifacts from acoustic reflections, sparse sampling, limited-view, and limited-bandwidth. There has also been some recent work in PACT toward using deep learning for wavefront localization. There have been networks based on fusion of information from two different reconstructions to improve the reconstruction using deep learning fusion based networks. === Using deep learning to locate photoacoustic point sources === Traditional photoacoustic beamforming techniques modeled photoacoustic wave propagation by using detector array geometry and the time-of-flight to account for differences in the PA signal arrival time. However, this technique failed to account for reverberant acoustic signals caused by acoustic reflection, resulting in acoustic reflection artifacts that corrupt the true photoacoustic point source location information. In Reiter et al., a convolutional neural network (similar to a simple VGG-16 style architecture) was used that took pre-beamformed photoacoustic data as input and outputted a classification result specifying the 2-D point source location. ==== Deep learning for PA wavefront localization ==== Johnstonbaugh et al. was able to localize the source of photoacoustic wavefronts with a deep neural network. The network used was an encoder-decoder style convolutional neural network. The encoder-decoder network was made of residual convolution, upsampling, and high field-of-view convolution modules. A Nyquist convolution layer and differentiable spatial-to-numerical transform layer were also used within the architecture. Simulated PA wavefronts served as the input for training the model. To create the wavefronts, the forward simulation of light propagation was done with the NIRFast toolbox and the light-diffusion approximation, while the forward simulation of sound propagation was done with the K-Wave toolbox. The simulated wavefronts were subjected to different scattering mediums and Gaussian noise. The output for the network was an artifact free heat map of the targets axial and lateral position. The network had a mean error rate of less than 30 microns when localizing target below 40 mm and had a mean error rate of 1.06 mm for localizing targets between 40 mm and 60 mm. With a slight modification to the network, the model was able to accommodate multi target localization. A validation experiment was performed in which pencil lead was submerged into an intralipid solution at a depth of 32 mm. The network was able to localize the lead's position when the solution had a reduced scattering coefficient of 0, 5, 10, and 15 cm−1. The results of the network show improvements over standard delay-and-sum or frequency-domain beamforming algorithms and Johnstonbaugh proposes that this technology could be used for optical wavefront shaping, circulating melanoma cell detection, and real-time vascular surgeries. === Removing acoustic reflection artifacts (in the presence of multiple sources and channel noise) === Building on the work of Reiter et al., Allman et al. utilized a full VGG-16 architecture to locate point sources and remove reflection artifacts within raw photoacoustic channel data (in the presence of multiple sources and channel noise). This utilization of deep learning trained on simulated data produced in the MATLAB k-wave library, and then later reaffirmed their results on experimental data. === Ill-posed PACT reconstruction === In PACT, tomographic reconstruction is performed, in which the projections from multiple solid angles are combined to form an image. When reconstruction methods like filtered backprojection or time reversal, are ill-posed inverse problems due to sampling under the Nyquist-Shannon's sampling requirement or with limited-bandwidth/view, the resulting reconstruction contains image artifacts. Traditionally these artifacts were removed with slow iterative methods like total variation minimization, but the advent of deep learning approaches has opened a new avenue that utilizes a priori knowledge from network training to remove artifacts. In the deep learning methods that seek to remove these sparse sampling, limited-bandwidth, and limited-view artifacts, the typical workflow involves first performing the ill-posed reconstruction technique to transform the pre-beamformed data into a 2-D representation of the initial pressure distribution that contains artifacts. Then, a convolutional neural network (CNN) is trained to remove the artifacts, in order to produce an artifact-free representation of the ground truth initial pressure distribution. ==== Using deep learning to remove sparse sampling artifacts ==== When the density of uniform tomographic view angles is under what is prescribed by the Nyquist-Shannon's sampling theorem, it is said that the imaging system is performing sparse sampling. Sparse sampling typically occurs as a way of keeping production costs low and improving image acquisition speed. The typical network architectures used to remove these sparse sampling artifacts are U-net and Fully Dense (FD) U-net. Both of these architectures contain a compression and decompression phase. The compression phase learns to compress the image to a latent representation that lacks the imaging artifacts and other details. The decompression phase then combines with information passed by the residual connections in order to add back image details without adding in the details associated with the artifacts. FD U-net modifies the original U-net architecture by including dense blocks that allow layers to utilize information learned by previous layers within the dense block. Another technique was proposed using a simple CNN based architecture for removal of artifacts and improving the k-wave image reconstruction. ==== Removing limited-view artifacts with deep learning ==== When a region of partial solid angles are not captured, generally due to geometric limitations, the image acquisition is said to have limited-view. As illustrated by the experiments of Davoudi et al., limited-view corruptions can be directly observed as missing information in the frequency domain of the reconstructed image. Limited-view, similar to sparse sampling, makes the initial reconstruction algorithm ill-posed. Prior to deep learning, the limited-view problem was addressed with complex hardware such as acoustic deflectors and full ring-shaped transducer arrays, as well as solutions like compressed sensing, weighted factor, and iterative filtered backprojection. The result of this ill-posed reconstruction is imaging artifacts that can be removed by CNNs. The deep learning algorithms used to remove limited-view artifacts include U-net and FD U-net, as well as generative adversarial networks (GANs) and volumetric versions of U-net. One GAN implementation of note improved upon U-net by using U-net as a generator and VGG as a discriminator, with the Wasserstein metric and gradient penalty to stabilize training (WGAN-GP). ==== Pixel-wise interpolation

  Read more →
• 

  Automation integrator

  An automation integrator is a systems integrator company or individual who makes different versions of automation hardware and software work together, generally combining several subsystems to work together as one large system. The title may refer to those who only integrate hardware, although these will often work with software integrators. Software created by automation integrators allows devices to communicate with each other, as well as collecting and reporting data. The magazine Control Engineering publishes an annual “Automation Integrator Guide” which lists over 2,000 automation integrators. They also give an annual system integrator of the year award to three automation integration firms. The Control System Integrators Association (CSIA) maintains a buyers' guide of over 1200 member and nonmember systems integrators known as the Industrial Automation Exchange, or CSIA Exchange for short. == Certification == The Control System Integrators Association (CSIA) certifies automation integrators, through an audit based on 79 critical criteria from the best practices manual. Companies must be associate members of the CSIA to be eligible for certification. Integrators can also receive certification through a program launched in 2012 by the Robotics Industries Association. == Industries == Automation Integrators work in a wide variety of industries which use robotics and automation. Some of the most common include:

  Read more →
• 

  Scientific Working Group – Imaging Technology

  The Scientific Working Group on Imaging Technology was convened by the Federal Bureau of Investigation in 1997 to provide guidance to law enforcement agencies and others in the criminal justice system regarding the best practices for photography, videography, and video and image analysis. This group was terminated in 2015. == History == As technology has advanced through the years, law enforcement has needed to stay abreast of emerging technological advances and use these in the investigation of crime. A factor that is considered when new technology is used in these investigations is the determination of whether the use of that new technology will be admissible in court. The judicial system in the United States currently has two standards used in the determination of admissibility of testimony regarding scientific evidence; the Daubert Standard and the Frye Standard. These standards guide the courts in the admissibility of testimony derived from the use of new technologies and scientific techniques. The Federal Bureau of Investigation (FBI), seeking to address possible admissibility issues with such testimony, established Scientific Working Groups starting with the Scientific Working Group on DNA Analysis and Methods (SWGDAM) in 1988. The goal of these groups is to open lines of communication between law enforcement agencies and forensic laboratories around the world while providing guidance on the use of new and innovative technologies and techniques. This guidance can lead to admissibility of evidence and/or testimony, provided proper methods in the collection of evidence and its analysis are employed. In 2009, the National Academy of Sciences released a report entitled, "Strengthening Forensic Science in the United States: A Path Forward." This report addresses many topics including challenges and disparities facing the forensic science community, standardization, certification of practitioners and accreditation of their respective entities, problems related to the interpretation of forensic evidence, the need for research, and the admission of forensic science evidence in litigation. This report mentions the Scientific Working Groups and their role in forensic science. The history of imaging technology (photography) can be said to extend back to the times of Chinese philosopher Mo-Ti (470-390 B.C.) who described the principles behind the precursor to the camera obscura. Since that time, advances in imaging technology include the discovery of chemical photographic processes in the 19th century and the use of electronic imaging technology that includes analog video cameras and digital video and still cameras. By the mid 1990s, it was apparent that technologically advanced camera systems such as these were being adopted for use in the criminal justice system. This led the FBI to convene a meeting of individuals working in the field of forensic imaging from federal, state, local, and foreign law enforcement, and the U.S. military, during the summer of 1997. As a result of this meeting, the Technical Working Group on Imaging Technology was formed from a core group of the meeting’s participants. This group later became the Scientific Working Group on Imaging Technology (SWGIT). Prior to the inception of SWGIT, some law enforcement agencies began adopting digital imaging technology. Due to the lack of guidelines or standards, some of these agencies attempted to replace all their film cameras with substandard digital cameras, only to find that the equipment they had purchased was not capable of accomplishing the mission for which they were intended. At that time only low resolution digital cameras were deemed affordable by some law enforcement agencies. Some of these agencies were forced to rethink their photography procedures and reverted to the use of film cameras or replaced their low-resolution digital cameras with higher quality, more expensive equipment. Also lacking at this early stage was guidance on how to store and archive digital image files. When SWGIT was formed, it was tasked with providing guidance to law enforcement and others in the criminal justice system by releasing documents that describe the best practices and guidelines for the use of imaging technology, to include these concerns and many others. This group was terminated in 2015. == SWGIT Function == During its existence, SWGIT provided information on the appropriate use of various imaging technologies including both established and new. This was accomplished through the release of documents such as the SWGIT Best Practices documents. As changes in technology occurred, these documents were updated. Over the course of its existence, SWGIT collaborated with other Scientific Working Groups to address imaging concerns within their respective disciplines. SWGIT published over 20 documents that dealt specifically with imaging technology. SWGIT also co-published documents with the Scientific Working Group on Digital Evidence (SWGDE) that had a component or components dealing with imaging technology. SWGIT also provided imaging technology guidance and input for documents from the Scientific Working Group on Friction Ridge Analysis, Study and Technology (SWGFAST), the Scientific Working Group for Forensic Document Examination (SWGDOC), and the Scientific Working Group on Shoeprint and Tire Tread Evidence (SWGTREAD). SWGIT assisted the American Society of Crime Lab Directors/Laboratory Accreditation Board (ASCLD/LAB) in the writing of definitions and standards for the accreditation of Digital and Multimedia Evidence sections of crime laboratories. In addition to releasing documents, SWGIT members disseminated best practices for law enforcement professionals where imaging technology was concerned. This was carried out by attending and lecturing at meetings and conferences of various forensic organizations that included: The American Academy of Forensic Sciences (AAFS) The International Association for Identification (IAI) The Law Enforcement and Emergency Services Video Association (LEVA) The American Society of Crime Lab Directors (ASCLD) The SWGIT membership consisted of approximately fifty scientists, photographers, instructors, and managers from more than two dozen federal, state, and local law enforcement agencies, as well as from the academic and research communities. The membership elected its officers from within. SWGIT was composed of the Executive Committee, four standing subcommittees, and ad hoc subcommittees appointed on an as-needed basis. The standing subcommittees were: Image Analysis, Forensic Photography, Video, and Outreach. This group was terminated in 2015. == Legal Proceedings == The following court cases have conducted Daubert v. Merrell Dow Pharm., Inc., 509 U.S. 579 (1993) hearings in which SWGIT best practice documents have been cited as accepted protocol, methodology, and as generally accepted techniques in the forensic community: U. S. v. Rudy Frabizio, U.S. District Court, Boston, MA, 2008 (Image Authentication) U.S. v. Nobumochi Furukawa, U.S. District Court, Minnesota, 2007 (Video Authentication) U.S. v. John Stroman, U.S. District Court, South Carolina, 2007 (Facial Comparison Analysis) State of Texas v. Daniel Day, Tarrant County Texas, 2005 (Camera Identification to Images) U.S. v. Marc Watzman, U.S. District Court, Northern Illinois, 2004 (Video Authentication) U.S. v. McKreith, U.S. District Court, Fort Lauderdale, FL, 2002 (Photo comparison of shirt) == Termination == This group was unfunded by the FBI in 2015.

  Read more →
• 

  Tensor operator

  In pure and applied mathematics, quantum mechanics and computer graphics, a tensor operator generalizes the notion of operators which are scalars and vectors. A special class of these are spherical tensor operators which apply the notion of the spherical basis and spherical harmonics. The spherical basis closely relates to the description of angular momentum in quantum mechanics and spherical harmonic functions. The coordinate-free generalization of a tensor operator is known as a representation operator. == The general notion of scalar, vector, and tensor operators == In quantum mechanics, physical observables that are scalars, vectors, and tensors, must be represented by scalar, vector, and tensor operators, respectively. Whether something is a scalar, vector, or tensor depends on how it is viewed by two observers whose coordinate frames are related to each other by a rotation. Alternatively, one may ask how, for a single observer, a physical quantity transforms if the state of the system is rotated. Consider, for example, a system consisting of a molecule of mass M {\displaystyle M} , traveling with a definite center of mass momentum, p z ^ {\displaystyle p{\mathbf {\hat {z}} }} , in the z {\displaystyle z} direction. If we rotate the system by 90 ∘ {\displaystyle 90^{\circ }} about the y {\displaystyle y} axis, the momentum will change to p x ^ {\displaystyle p{\mathbf {\hat {x}} }} , which is in the x {\displaystyle x} direction. The center-of-mass kinetic energy of the molecule will, however, be unchanged at p 2 / 2 M {\displaystyle p^{2}/2M} . The kinetic energy is a scalar and the momentum is a vector, and these two quantities must be represented by a scalar and a vector operator, respectively. By the latter in particular, we mean an operator whose expected values in the initial and the rotated states are p z ^ {\displaystyle p{\mathbf {\hat {z}} }} and p x ^ {\displaystyle p{\mathbf {\hat {x}} }} . The kinetic energy on the other hand must be represented by a scalar operator, whose expected value must be the same in the initial and the rotated states. In the same way, tensor quantities must be represented by tensor operators. An example of a tensor quantity (of rank two) is the electrical quadrupole moment of the above molecule. Likewise, the octupole and hexadecapole moments would be tensors of rank three and four, respectively. Other examples of scalar operators are the total energy operator (more commonly called the Hamiltonian), the potential energy, and the dipole-dipole interaction energy of two atoms. Examples of vector operators are the momentum, the position, the orbital angular momentum, L {\displaystyle {\mathbf {L} }} , and the spin angular momentum, S {\displaystyle {\mathbf {S} }} . (Fine print: Angular momentum is a vector as far as rotations are concerned, but unlike position or momentum it does not change sign under space inversion, and when one wishes to provide this information, it is said to be a pseudovector.) Scalar, vector and tensor operators can also be formed by products of operators. For example, the scalar product L ⋅ S {\displaystyle {\mathbf {L} }\cdot {\mathbf {S} }} of the two vector operators, L {\displaystyle {\mathbf {L} }} and S {\displaystyle {\mathbf {S} }} , is a scalar operator, which figures prominently in discussions of the spin–orbit interaction. Similarly, the quadrupole moment tensor of our example molecule has the nine components Q i j = ∑ α q α ( 3 r α , i r α , j − r α 2 δ i j ) . {\displaystyle Q_{ij}=\sum _{\alpha }q_{\alpha }\left(3r_{\alpha ,i}r_{\alpha ,j}-r_{\alpha }^{2}\delta _{ij}\right).} Here, the indices i {\displaystyle i} and j {\displaystyle j} can independently take on the values 1, 2, and 3 (or x {\displaystyle x} , y {\displaystyle y} , and z {\displaystyle z} ) corresponding to the three Cartesian axes, the index α {\displaystyle \alpha } runs over all particles (electrons and nuclei) in the molecule, q α {\displaystyle q_{\alpha }} is the charge on particle α {\displaystyle \alpha } , and r α , i {\displaystyle r_{\alpha ,i}} is the i {\displaystyle i} -th component of the position of this particle. Each term in the sum is a tensor operator. In particular, the nine products r α , i r α , j {\displaystyle r_{\alpha ,i}r_{\alpha ,j}} together form a second rank tensor, formed by taking the outer product of the vector operator r α {\displaystyle {\mathbf {r} }_{\alpha }} with itself. == Rotations of quantum states == === Quantum rotation operator === The rotation operator about the unit vector n (defining the axis of rotation) through angle θ is U [ R ( θ , n ^ ) ] = exp ⁡ ( − i θ ℏ n ^ ⋅ J ) {\displaystyle U[R(\theta ,{\hat {\mathbf {n} }})]=\exp \left(-{\frac {i\theta }{\hbar }}{\hat {\mathbf {n} }}\cdot \mathbf {J} \right)} where J = (Jx, Jy, Jz) are the rotation generators (also the angular momentum matrices): J x = ℏ 2 ( 0 1 0 1 0 1 0 1 0 ) J y = ℏ 2 ( 0 i 0 − i 0 i 0 − i 0 ) J z = ℏ ( − 1 0 0 0 0 0 0 0 1 ) {\displaystyle J_{x}={\frac {\hbar }{\sqrt {2}}}{\begin{pmatrix}0&1&0\\1&0&1\\0&1&0\end{pmatrix}}\,\quad J_{y}={\frac {\hbar }{\sqrt {2}}}{\begin{pmatrix}0&i&0\\-i&0&i\\0&-i&0\end{pmatrix}}\,\quad J_{z}=\hbar {\begin{pmatrix}-1&0&0\\0&0&0\\0&0&1\end{pmatrix}}} and let R ^ = R ^ ( θ , n ^ ) {\displaystyle {\widehat {R}}={\widehat {R}}(\theta ,{\hat {\mathbf {n} }})} be a rotation matrix. According to the Rodrigues' rotation formula, the rotation operator then amounts to U [ R ( θ , n ^ ) ] = 1 1 − i sin ⁡ θ ℏ n ^ ⋅ J − 1 − cos ⁡ θ ℏ 2 ( n ^ ⋅ J ) 2 . {\displaystyle U[R(\theta ,{\hat {\mathbf {n} }})]=1\!\!1-{\frac {i\sin \theta }{\hbar }}{\hat {\mathbf {n} }}\cdot \mathbf {J} -{\frac {1-\cos \theta }{\hbar ^{2}}}({\hat {\mathbf {n} }}\cdot \mathbf {J} )^{2}.} An operator Ω ^ {\displaystyle {\widehat {\Omega }}} is invariant under a unitary transformation U if Ω ^ = U † Ω ^ U ; {\displaystyle {\widehat {\Omega }}={U}^{\dagger }{\widehat {\Omega }}U;} in this case for the rotation U ^ ( R ) {\displaystyle {\widehat {U}}(R)} , Ω ^ = U ( R ) † Ω ^ U ( R ) = exp ⁡ ( i θ ℏ n ^ ⋅ J ) Ω ^ exp ⁡ ( − i θ ℏ n ^ ⋅ J ) . {\displaystyle {\widehat {\Omega }}={U(R)}^{\dagger }{\widehat {\Omega }}U(R)=\exp \left({\frac {i\theta }{\hbar }}{\hat {\mathbf {n} }}\cdot \mathbf {J} \right){\widehat {\Omega }}\exp \left(-{\frac {i\theta }{\hbar }}{\hat {\mathbf {n} }}\cdot \mathbf {J} \right).} === Angular momentum eigenkets === The orthonormal basis set for total angular momentum is | j , m ⟩ {\displaystyle |j,m\rangle } , where j is the total angular momentum quantum number and m is the magnetic angular momentum quantum number, which takes values −j, −j + 1, ..., j − 1, j. A general state within the j subspace | ψ ⟩ = ∑ m c j m | j , m ⟩ {\displaystyle |\psi \rangle =\sum _{m}c_{jm}|j,m\rangle } rotates to a new state by: | ψ ¯ ⟩ = U ( R ) | ψ ⟩ = ∑ m c j m U ( R ) | j , m ⟩ {\displaystyle |{\bar {\psi }}\rangle =U(R)|\psi \rangle =\sum _{m}c_{jm}U(R)|j,m\rangle } Using the completeness condition: I = ∑ m ′ | j , m ′ ⟩ ⟨ j , m ′ | {\displaystyle I=\sum _{m'}|j,m'\rangle \langle j,m'|} we have | ψ ¯ ⟩ = I U ( R ) | ψ ⟩ = ∑ m m ′ c j m | j , m ′ ⟩ ⟨ j , m ′ | U ( R ) | j , m ⟩ {\displaystyle |{\bar {\psi }}\rangle =IU(R)|\psi \rangle =\sum _{mm'}c_{jm}|j,m'\rangle \langle j,m'|U(R)|j,m\rangle } Introducing the Wigner D matrix elements: D ( R ) m ′ m ( j ) = ⟨ j , m ′ | U ( R ) | j , m ⟩ {\displaystyle {D(R)}_{m'm}^{(j)}=\langle j,m'|U(R)|j,m\rangle } gives the matrix multiplication: | ψ ¯ ⟩ = ∑ m m ′ c j m D m ′ m ( j ) | j , m ′ ⟩ ⇒ | ψ ¯ ⟩ = D ( j ) | ψ ⟩ {\displaystyle |{\bar {\psi }}\rangle =\sum _{mm'}c_{jm}D_{m'm}^{(j)}|j,m'\rangle \quad \Rightarrow \quad |{\bar {\psi }}\rangle =D^{(j)}|\psi \rangle } For one basis ket: | j , m ¯ ⟩ = ∑ m ′ D ( R ) m ′ m ( j ) | j , m ′ ⟩ {\displaystyle |{\overline {j,m}}\rangle =\sum _{m'}{D(R)}_{m'm}^{(j)}|j,m'\rangle } For the case of orbital angular momentum, the eigenstates | ℓ , m ⟩ {\displaystyle |\ell ,m\rangle } of the orbital angular momentum operator L and solutions of Laplace's equation on a 3d sphere are spherical harmonics: Y ℓ m ( θ , ϕ ) = ⟨ θ , ϕ | ℓ , m ⟩ = ( 2 ℓ + 1 ) 4 π ( ℓ − m ) ! ( ℓ + m ) ! P ℓ m ( cos ⁡ θ ) e i m ϕ {\displaystyle Y_{\ell }^{m}(\theta ,\phi )=\langle \theta ,\phi |\ell ,m\rangle ={\sqrt {{(2\ell +1) \over 4\pi }{(\ell -m)! \over (\ell +m)!}}}\,P_{\ell }^{m}(\cos {\theta })\,e^{im\phi }} where Pℓm is an associated Legendre polynomial, ℓ is the orbital angular momentum quantum number, and m is the orbital magnetic quantum number which takes the values −ℓ, −ℓ + 1, ... ℓ − 1, ℓ The formalism of spherical harmonics have wide applications in applied mathematics, and are closely related to the formalism of spherical tensors, as shown below. Spherical harmonics are functions of the polar and azimuthal angles, ϕ and θ respectively, which can be conveniently collected into a unit vector n(θ, ϕ) pointing in the direction of those angles, in the Cartesian basis it is: n ^ ( θ , ϕ ) = cos ⁡ ϕ sin ⁡ θ e x + s

  Read more →
• 

  Open Syllabus Project

  The Open Syllabus Project (OSP) is an online open-source platform that catalogs and analyzes millions of college syllabi. Founded by researchers from the American Assembly at Columbia University, the OSP has amassed the most extensive collection of searchable syllabi. Since its beta launch in 2016, the OSP has collected over 7 million course syllabi from over 80 countries, primarily by scraping publicly accessible university websites. The project is directed by Joe Karaganis. == History == The OSP was formed by a group of data scientists, sociologists, and digital-humanities researchers at the American Assembly, a public-policy institute based at Columbia University. The OSP was partly funded by the Sloan Foundation and the Arcadia Fund. Joe Karaganis, former vice-president of the American Assembly, serves as the project director of the OSP. The project builds on prior attempts to archive syllabi, such as H-Net, MIT OpenCourseWare, and historian Dan Cohen's defunct Syllabus Finder website (Cohen now sits on the OSP's advisory board). The OSP became a non-profit and independent of the American Assembly in November 2019. In January 2016, the OSP launched a beta version of their "Syllabus Explorer," which they had collected data for since 2013. The Syllabus Explorer allows users to browse and search texts from over one million college course syllabi. The OSP launched a more comprehensive version 2.0 of the Syllabus Explorer in July 2019. The newer version includes an interactive visualization that displays texts as dots on a knowledge map. As of 2022, the OSP has collected over 7 million course syllabi. The Syllabus Explorer represents the "largest collection of searchable syllabi ever amassed." == Methodology == The OSP has collected syllabi data from over 80 countries dating to 2000. The syllabi stem from over 4,000 worldwide institutions. Most of the OSP's data originates from the United States. Canada, Australia, and the U.K also have large datasets. The OSP primarily collects syllabi by scraping publicly accessible university websites. The OSP also allows syllabi submissions from faculty, students, and administrators. The OSP developers use machine learning and natural language processing to extract metadata from such syllabi. Since only metadata is collected, no individual syllabus or personal identifying information is found in the OSP database. The OSP classifies the syllabi into 62 subject fields – corresponding to the U.S. Department of Education's Classification of Instructional Programs (CIP). Additionally, the OSP assigns each text a "teaching score" from 0–100. This score represents the text's percentile rank among citations in the total citation count and is a numerical indicator of the relative frequency of which a particular work is taught. The OSP also has data on which texts are most likely to be assigned together. The developers behind the OSP admit that the database is incomplete and likely contains "a fair number of errors." Karaganis estimates that 80–100 million syllabi exist in the United States alone. The OSP is unable to access syllabi behind private course-management software like Blackboard. == Notable findings == === Anthropology === Using data from the OSP, anthropologist Laurence Ralph uncovered that black anthropologists are "woefully under-represented in (if not erased from) most anthropology syllabi." Black authors wrote less than 1 percent of the top 1,000 assigned works. === Economics === The database indicates Greg Mankiw is the most frequently cited author for college economics courses. === English literature === The OSP found that Mary Shelley's Frankenstein was the most widely taught novel in college courses. Additionally, the majority of novels published after 1945 taught in English classes were historical fiction. === Female writers === The most read female writer on college campuses is Kate L. Turabian for her A Manual for Writers of Research Papers, Theses, and Dissertations . Turabian is followed by Diana Hacker, Toni Morrison, Jane Austen, and Virginia Woolf. === Film === The most assigned film according to the OSP is the 1929 Soviet documentary film, Man with a Movie Camera. English filmmaker Alfred Hitchcock is the most assigned director in college courses. === History === Historians George Brown Tindall and David Emory Shi's America: A Narrative History is the number one assigned textbook for history, followed by Anne Moody's memoir, Coming of Age in Mississippi. === Philosophy === The most assigned texts in the field of philosophy include Aristotle's Nicomachean Ethics, John Stuart Mill's Utilitarianism, and Plato's Republic. Plato's Republic was also the second most assigned text in universities in the English-speaking world (only behind Strunk and White's Elements of Style). === Physics === David Halliday's et al. Fundamentals of Physics is the number one ranked physics textbook in the OSP's database. === Political science === Data from the OSP indicates that the dominant political science texts are written almost exclusively by white men and scholars based in the West. In the top 200 most-frequently assigned works, 15 are authored by at least one woman. === Public administration === American president Woodrow Wilson's article "The Study of Administration" was the most frequently assigned text in public affairs and administration syllabi. == Reception == According to William Germano et al., the OSP is a "fascinating resource but is also prone to misrepresenting or at least distracting us from the most important business of a syllabus: communicating with students." Historian William Caferro remarks that the OSP is a "tacit experience of sharing, but a useful one." English professor Bart Beaty writes that, "Despite the many reservations about the completeness of its data, the OSP provides a rare opportunity for scholars to move beyond the anecdotal in discussions of canon-formation in teaching." Media theorist Elizabeth Losh opines that "big data approaches", like the OSP, may "raise troubling questions for instructors about informed consent, pedagogical privacy, and quantified metrics."

  Read more →
• 

  Video browsing

  Video browsing, also known as exploratory video search, is the interactive process of skimming through video content in order to satisfy some information need or to interactively check if the video content is relevant. While originally proposed to help users inspecting a single video through visual thumbnails, modern video browsing tools enable users to quickly find desired information in a video archive by iterative human–computer interaction through an exploratory search approach. Many of these tools presume a smart user that wants features to interactively inspect video content, as well as automatic content filtering features. For that purpose, several video interaction features are usually provided, such as sophisticated navigation in video or search by a content-based query. Video browsing tools often build on lower-level video content analysis, such as shot transition detection, keyframe extraction, semantic concept detection, and create a structured content overview of the video file or video archive. Furthermore, they usually provide sophisticated navigation features, such as advanced timelines, visual seeker bars or a list of selected thumbnails, as well as means for content querying. Examples of content queries are shot filtering through visual concepts (e.g., only shots showing cars), through some specific characteristics (e.g., color or motion filtering), through user-provided sketches (e.g., a visually drawn sketch), or through content-based similarity search. == History == Video browsing was originally proposed by Iranian engineer Farshid Arman, Taiwanese computer scientist Arding Hsu, and computer scientist Ming-Yee Chiu, while working at Siemens, and it was presented at the ACM International Conference in August 1993. They described a shot detection algorithm for compressed video that was originally encoded with discrete cosine transform (DCT) video coding standards such as JPEG, MPEG and H.26x. The basic idea was that, since the DCT coefficients are mathematically related to the spatial domain and represent the content of each frame, they can be used to detect the differences between video frames. In the algorithm, a subset of blocks in a frame and a subset of DCT coefficients for each block are used as motion vector representation for the frame. By operating on compressed DCT representations, the algorithm significantly reduces the computational requirements for decompression and enables effective video browsing. The algorithm represents separate shots of a video sequence by an r-frame, a thumbnail of the shot framed by a motion tracking region. A variation of this concept was later adopted for QBIC video content mosaics, where each r-frame is a salient still from the shot it represents. === Video Notebook === Modern video browsing solutions include Video Notebook, a Menlo Park startup founded in 2021 by Mike Lanza, which uses computer vision to extract slides and optical character recognition and speech recognition to facilitate video search. The software can be either used on the client side (using a browser extension), where the slides and text are extracted while the video is watched (e.g. on a video platform like YouTube or Udemy), or on the server side. Processed videos, which can be viewed in the Video Notebook web app, feature a video browsing user interface with extracted timestamped slides, a search bar for querying the video (or a collection of videos), and text chapters. Video Notebook customers include organisations like Ernst & Young. === Video Browser Showdown === The Video Browser Showdown (VBS) is an annual live evaluation competition for exploratory video search tools, where international researchers use video browsing tools to solve ad-hoc video search tasks on a moderately large data set as fast as possible. The main goal of the VBS, which started in 2012 at the International Conference on MultiMedia Modeling (MMM), is to advance the performance of video browsing tools. Since 2016, the VBS also collaborates with TRECVID. The aim of the VBS is to evaluate video browsing tools for efficiency at known-item search (KIS) tasks with a well-defined data set in direct comparison to other tools.

  Read more →
• 

  Automated parking system

  An automated (car) parking system (APS) is a mechanical system designed to minimize the area and/or volume required for parking cars. Like a multi-story parking garage, an APS provides parking for cars on multiple levels stacked vertically to maximize the number of parking spaces while minimizing land usage. The APS, however, utilizes a mechanical system to transport cars to and from parking spaces (rather than the driver) in order to eliminate much of the space wasted in a multi-story parking garage. While a multi-story parking garage is similar to multiple parking lots stacked vertically, an APS is more similar to an automated storage and retrieval system for cars. Parking systems are generally powered by electric motors or hydraulic pumps that move vehicles into a storage position.The paternoster (shown animated at the right) is an example of one of the earliest and most common types of APS. APS are also generically known by a variety of other names, including:automated parking facility (APF), automated vehicle storage and retrieval system (AVSRS), car parking system, mechanical parking, and robotic parking garage. == History == The concept for the automated parking system was and is driven by two factors: a need for parking spaces and a scarcity of available land. The earliest use of an APS was in Paris, France in 1905 at the Garage Rue de Ponthieu. The APS consisted of a groundbreaking multi-story concrete structure with an internal car elevator to transport cars to upper levels where attendants parked the cars. In the 1920s, a Ferris wheel-like APS (for cars rather than people) called a paternoster system became popular as it could park eight cars in the ground space normally used for parking two cars. Mechanically simple with a small footprint, the paternoster was easy to use in many places, including inside buildings. At the same time, Kent Automatic Garages was installing APS with capacities exceeding 1,000 cars. The “ferris-wheel,” or paternoster system — was created by the Westinghouse Corporation in 1923 and subsequently built in 1932 on Chicago's Monroe Street. The Nash Motor Company created the first glass-enclosed version of this system for the Chicago Century of Progress Exhibition in 1933 The first driverless parking garage opened in 1951 in Washington, D.C., but was replaced with office space due to increasing land values. APS saw a spurt of interest in the U.S. in the late 1940s and 1950s with the Bowser, Pigeon Hole and Roto Park systems. In 1957, 74 Bowser, Pigeon Hole systems were installed, and some of these systems remain in operation. However, interest in APS in the U.S. waned due to frequent mechanical problems and long waiting times for patrons to retrieve their cars. In the United Kingdom, the Auto Stacker opened in 1961 in Woolwich, south east London, but proved equally difficult to operate. Interest in APS in the U.S. was renewed in the 1990s, and there were 25 major current and planned APS projects (representing nearly 6,000 parking spaces) in 2012. The first American robotic parking garage opened in 2002 in Hoboken, New Jersey. While interest in the APS in the U.S. languished until the 1990s, Europe, Asia and Central America had been installing more technically advanced APS since the 1970s. In the early 1990s, nearly 40,000 parking spaces were being built annually using the paternoster APS in Japan. In 2012, there are an estimated 1.6 million APS parking spaces in Japan. The ever-increasing scarcity of available urban land (urbanization) and increase of the number of cars in use (motorization) have combined with sustainability and other quality-of-life issues to renew interest in APS as alternatives to multi-storey car parks, on-street parking, and parking lots. == Largest systems == The largest Automated Parking Facility in the world is in Al Jahra, Kuwait, and provides 2,314 parking spaces. The world's fastest Automated Parking System is in Wolfsburg, Germany, with a retrieval time of 1 minute and 44 seconds. The largest APS in Europe is at Dokk1 in Aarhus, Denmark, and provides 1,000 parking spaces via 20 car lifts. == Space saving == All APS take advantage of a common concept to decrease the area of parking spaces - removing the driver and passengers from the car before it is parked. With either fully automated or semi-automated APS, the car is driven up to an entry point to the APS and the driver and passengers exit the car. The car is then moved automatically or semi-automatically (with some attendant action required) to its parking space. The space-saving provided by the APS, compared to the multi-story parking garage, is derived primarily from a significant reduction in space not directly related to the parking of the car: Parking space width and depth (and distances between parking spaces) are dramatically reduced since no allowance need be made for driving the car into the parking space or for the opening of car doors (for drivers and passengers) No driving lanes or ramps are needed to drive the car to/from the entrance/exit to a parking space Ceiling height is minimized since there is no pedestrian traffic (drivers and passengers) in the parking area, and No walkways, stairways or elevators are needed to accommodate pedestrians in the parking area. With the elimination of ramps, driving lanes, pedestrians and the reduction in ceiling heights, the APS requires substantially less structural material than the multi-story parking garage. Many APS utilize a steel framework (some use thin concrete slabs) rather than the monolithic concrete design of the multi-story parking garage. These factors contribute to an overall volume reduction and further space savings for the APS. == Other considerations == In addition to the space saving, many APS designs provide a number of secondary benefits: The parked cars and their contents are more secure since there is no public access to parked cars Minor parking lot damage such as scrapes and dents are eliminated Drivers and passengers are safer not having to walk through parking lots or garages Driving around in search of a parking space is eliminated, thereby reducing engine emissions and wasted time Only minimal ventilation and lighting systems are needed Handicap access is improved The volume and visual impact of the parking structure is minimized Shorter construction time === Problems === There have been a number of problems with robotic parking systems, particularly in the United States. The systems work well in balanced throughput situations like shopping malls and train stations, but they are unsuited to high peak volume applications like rush hour usage or stadiums and they suffer from technical problems. Further, parkers not familiar with the system may cause problems, for example by failing to push the button to alert a fully automated system to the presence of a car to be parked. In London around 40 vehicles were trapped for two years in CBRE's system. == Fully automated vs semi-automated == Fully automated parking systems operate much like robotic valet parking. The driver drives the car into an APS entry (transfer) area. The driver and all passengers exit the car. The driver uses an automated terminal nearby for payment and receipt of a ticket. When driver and passengers have left the entry area, the mechanical system lifts the car and transports it to a pre-determined parking space in the system. More sophisticated fully automated APS will obtain the dimensions of cars on entry in order to place them in the smallest available parking space. The driver retrieves a car by inserting a ticket or code into an automated terminal. The APS lifts the car from its parking space and delivers it to an exit area. Most often, the retrieved car has been oriented to eliminate the need for the driver to back out. Fully automated APS theoretically eliminate the need for parking attendants. Semi-automated APS also use a mechanical system of some type to move a car to its parking space, however putting the car into and/or the operation of the system requires some action by an attendant or the driver. The choice between fully and semi-automated APS is often a matter of space and cost, however large capacity (> 100 cars) tend to be fully automated. == Applications == By virtue of their relatively smaller volume and mechanized parking systems, APS are often used in locations where a multi-story parking garage would be too large, too costly or impractical. Examples of such applications include, under or inside existing or new structures, between existing structures and in irregularly shaped areas. APS can also be applied in situations similar to multi-storey parking garages such as freestanding above ground, under buildings above grade and under buildings below grade. == Costs == The direct comparison of costs between an APS and a multi-story parking garage can be complicated by many variables such as capacity, land costs, area shape, number and location of entranc

  Read more →
• 

  Apptek

  Applications Technology (AppTek) is a U.S. company headquartered in McLean, Virginia that specializes in artificial intelligence and machine learning for human language technologies. The company provides both managed and professional services for natural language processing (NLP) technologies including automatic speech recognition (ASR), neural machine translation (MT), natural-language understanding (NLU) and neural speech synthesis. AppTek's Head of Science, Prof. Dr. -Ing Hermann Ney, was awarded the IEEE James L. Flanagan Speech and Audio Processing Award in 2019 and the ISCA Medal for Scientific Achievement in 2021 for his work in natural language processing. == History == AppTek was acquired in 1998 by Lernout & Hauspie (at the time a NASDAQ publicly traded company), AppTek organized a management buy-out and went private again in 2001. In 2014, the company sold its hybrid machine translation technology to eBay and has since rebuilt the platform to modern neural-based approaches for machine translation. In 2020, SOSi acquired non-controlling interest in AppTek and became an exclusive reseller of AppTek products for U.S. federal, state, and local government entities.

  Read more →
• 

  AI Overviews

  AI Overviews is an artificial intelligence (AI) feature integrated into Google Search that produces AI-generated summaries of search results. The feature has been criticized for its inaccuracy and for reducing website traffic. == History and development == AI Overviews were first introduced as part of Google's Search Generative Experience (SGE), which was unveiled at the Google I/O conference in May 2023. In May 2024 at Google I/O 2024, the feature was rebranded as AI Overviews and launched in the United States. The introduction of AI Overviews was seen as a strategic move to compete with other generative AI advancements, including OpenAI's ChatGPT. By August 2024, AI Overviews was rolled out to several other countries, including the United Kingdom, India, Japan, Brazil, Mexico, and Indonesia, with support for multiple languages. In October 2024, Google expanded the feature globally, making it available in over 100 countries. In December 2024, Botify x Demandsphere released findings stating that when AI Overviews and featured snippets appear together on the search engine results page, they take up approximately 67.1% of the screen on desktop and 75.7% on mobile. Even if content is ranking in the #1 position, it may not be visible to consumers if other visual elements on the results page are more prominent. In March 2025, Google started testing an "AI Mode", where the search results page is AI-generated. The company was also considering adding advertisements to the AI Mode, as they already exist in AI Overviews. As of May 2025, AI Overviews are available in over 200 countries and territories and in more than 40 languages. As of March 2026, Google AI Overviews appear on more than 48% of total Google Search queries, compared to just 6.49% in the previous year (58% year-over-year growth). == Functionality == The AI Overviews feature uses large language models to generate summaries from web content. The overviews are designed to be concise, providing a snapshot of relevant information about the queried topic. Google allows users to adjust the language complexity in summaries, offering both simplified and detailed options. The overviews also include links to sources. According to a June 2025 study by Semrush, the most cited source is Quora, followed by Reddit. == Reception == The feature has faced criticism for inaccuracies, including instances where erroneous or nonsensical content was generated. Depending on what is searched for, the overview may also consist of hallucinated content, such as when searching for idioms that do not exist. In May 2024, Google temporarily restricted the AI tool after it provided suggestions that were seen as nonsensical and harmful, such as telling users to eat rocks or apply glue on pizza. Concerns were also raised by content publishers, who feared a decline in web traffic as users relied on the summaries instead of visiting source websites. A Google patent from 2026 raised the concern of webmasters that Google could entirely replace the landing page of websites by an AI optimized copy of the website in its results. There is also apprehension about the ethical implications of AI-driven content aggregation, including its impact on intellectual property rights and the visibility of smaller content providers. The European Commission announced in December 2025 that they were investigating whether AI Overviews breached European competition law. In response, Google has stated its commitment to improve content validation and refine the algorithms used to filter unreliable information. Google implemented measures to prioritize link placement within AI Overviews, aiming to balance user convenience with the needs of content creators. In January 2026, Google restricted AI Overviews on certain health-related searches following an investigation by The Guardian. == Lawsuits == On February 24, 2025, Chegg sued Alphabet over the AI Overviews feature, claiming that it was leading to students preferring "low-quality, unverified AI summaries", thus violating antitrust law. Chegg also said it was considering either a sale or a take-private transaction. In September 2025, Penske Media Corporation, the publisher of Rolling Stone and The Hollywood Reporter, sued Google, claiming that AI Overviews illegally regurgitate content from their websites and drive off potential site visitors by always appearing on top of the search results while leaving little incentive to see the linked sources. The company stated that "the future of digital media and [...] its integrity [...] is threatened by Google's current actions", alleging that 20% of searches that link to Penske-owned websites show AI Overviews and that the figure is expected to rise. Google spokesperson José Castañeda called the claims "meritless" and stated that "AI Overviews send traffic to a greater diversity of sites." In 2026, Canadian musician Ashley MacIsaac filed a lawsuit against Google claiming that the AI Overview feature had wrongly stated that MacIsaac had been convicted of numerous criminal offences and was on the sex offender registry. He claims this incorrect information led to the cancellation of a December 2025 gig organized by the Sipekne'katik First Nation.

  Read more →
• 

  Enterprise mobile application

  The term enterprise mobile application is used in the context of mobile apps created/brought by individual organizations for their workers to carry out the functions required to run the organization. It is the process of building a mobile application for the requirements of an enterprise. An enterprise mobile application belonging to an organization is expected to be used by only the workers of that organization. The definition of enterprise mobile application does not include the mobile apps that an organization create for its customers or consumers of the products or services generated by the organization. == Example == An organization, whether for-profit or non-profit, may create a mobile app for its members to track inventory levels of supplies they distribute to their target communities or materials used in product manufacturing. Such a mobile app comes under the definition of enterprise mobile application. However, the same organization may also create another mobile app to sell their products to end users or spread awareness of their services to various communities, and that mobile app would not come under definition of enterprise mobile application. == Enterprise mobile solution providers == Enterprise Mobile solution providers create and develop apps for individual organizations that can buy instead of creating the apps themselves. Reasons for Organizations buying the apps include time and cost savings, technical expertise. Today Enterprise Mobility is playing track role for enterprise transformation. Today, enterprises needs productivity is a fast way. Enterprise mobility helps business owners to build their work in a progressive way by assisting enterprise mobility solutions.

  Read more →
• 

  Oculus Medium

  Oculus Medium is a digital sculpting software that works with virtual reality headsets and 6DoF motion controllers. It is used to create and paint digital sculptures. Medium works only on Oculus Rift. It was released on December 5, 2016, following with a major update in 2018 introducing new features and a revamped UI. On December 9, 2019, Oculus Medium was acquired by Adobe and re-named to "Medium by Adobe".

  Read more →
• 

  Digital art

  Digital art, or the digital arts, is artistic work that uses digital technology as part of the creative or presentational process. It can also refer to computational art that uses and engages with digital media. Since the 1960s, various names have been used to describe digital art, including computer art, electronic art, multimedia art, and new media art. Digital art includes pieces stored on physical media, such as with digital painting, as well as digital galleries on websites. Digital art also extends to the field of visual computing. == History == In the early 1960s, John Whitney developed the first computer-generated art using mathematical operations. In 1963, Ivan Sutherland invented the first user interactive computer-graphics interface known as Sketchpad. Between 1974 and 1977, Salvador Dalí created two big canvases of Gala Contemplating the Mediterranean Sea which at a distance of 20 meters is transformed into the portrait of Abraham Lincoln (Homage to Rothko) and prints of Lincoln in Dalivision based on a portrait of Abraham Lincoln processed on a computer by Leon Harmon published in "The Recognition of Faces". The technique is similar to what later became known as photographic mosaics. Andy Warhol created digital art using an Amiga where the computer was publicly introduced at the Lincoln Center in July 1985. An image of Debbie Harry was captured in monochrome from a video camera and digitized into a graphics program called ProPaint. Warhol manipulated the image by adding color using flood fills. == Art made for digital media == Artwork that is highly computational, presented through digital media, and explicitly engages with digital technologies are categorized as "art made for digital media". This differs from art using digital tools, which incorporate digital technology in the creation process but may exist outside the digital world. Digital art historian Christiane Paul writes that it "is highly problematic to classify all art that makes use of digital technologies somewhere in its production and dissemination process as digital art since it makes it almost impossible to arrive at any unifying statement about the art form". == Art that uses digital tools == Digital art can be purely computer-generated (such as fractals and algorithmic art) or taken from other sources, such as a scanned photograph or an image drawn using vector graphics software using a mouse or graphics tablet. Artworks are considered digital paintings when created similarly to non-digital paintings but using software on a computer platform and digitally outputting the resulting image as painted on canvas. Despite differing viewpoints on digital technology's impact on the arts, a consensus exists within the digital art community about its significant contribution to expanding the creative domain, i.e., that it has greatly broadened the creative opportunities available to professional and non-professional artists alike. == Art theorists and art historians == Notable art theorists and historians in this field include: Oliver Grau, Jon Ippolito, Christiane Paul, Frank Popper, Jasia Reichardt, Mario Costa, Christine Buci-Glucksmann, Dominique Moulon, Roy Ascott, Catherine Perret, Margot Lovejoy, Edmond Couchot, Tina Rivers Ryan, Fred Forest and Edward A. Shanken. === Digital painting === Digital painting is either a physical painting made with the use of digital electronics and spray paint robotics within the digital art fine art context or pictorial art imagery made with pixels on a computer screen that mimics artworks from the traditional histories of painting and illustration. === Artificial intelligence art === Artists have used artificial intelligence to create artwork since at least the 1960s. Since their design in 2014, some artists have created artwork using a generative adversarial network (GAN), which is a machine learning framework that allows two "algorithms" to compete with each other and iterate. It can be used to generate pictures that have visual effects similar to traditional fine art. The essential idea of image generators is that people can use text descriptions to let AI convert their text into visual picture content. Anyone can turn their language into a painting through a picture generator. == Digital art education == Digital art education has become more common with the advancement of digital hardware and software. From hardware such as graphics tablets, styluses, tablets, 3D scanners, virtual reality headsets, and digital cameras; to software such as digital art software, 3D modeling software, 3D rendering, digital sculpting, 2D graphics software, digital painting, 3D terrain generation, 2D animation software, 3D animation software, raster graphics editors, vector graphics editors, mathematical art software, and video editing software. == Scholarship and archives == In addition to the creation of original art, research methods that utilize AI have been generated to quantitatively analyze digital art collections. This has been made possible due to the large-scale digitization of artwork in the past few decades. Although the main goal of digitization was to allow for accessibility and exploration of these collections, the use of AI in analyzing them has brought about new research perspectives. Two computational methods, close reading and distant viewing, are the typical approaches used to analyze digitized art. Close reading focuses on specific visual aspects of one piece. Some tasks performed by machines in close reading methods include computational artist authentication and analysis of brushstrokes or texture properties. In contrast, through distant viewing methods, the similarity across an entire collection for a specific feature can be statistically visualized. Common tasks relating to this method include automatic classification, object detection, multimodal tasks, knowledge discovery in art history, and computational aesthetics. Whereas distant viewing includes the analysis of large collections, close reading involves one piece of artwork. Whilst 2D and 3D digital art is beneficial as it allows the preservation of history that would otherwise have been destroyed by events like natural disasters and war, there is the issue of who should own these 3D scans – i.e., who should own the digital copyrights. === Computer demos === Computer demos are based on computer programs, usually non-interactive. It produces audiovisual presentations. They are a novel form of art, which emerged as a consequence of the home computer revolution in the early 1980s. In the classification of digital art, they can be best described as real-time procedurally generated animated audio-visuals. This form of art does not concentrate only on the aesthetics of the final presentation, but also on the complexities and skills involved in creating the presentation. As such, it can be fully enjoyed only by persons with a relatively high knowledge level of relevant computer technologies. An example is that, as said by Hua Jin and Jie Yang, Using computer-aided design software to present the class content in art design teaching," is not to advocate computer-aided design instead of hand-drawn performance, but to make it serve the profession earlier through a more reasonable course arrangement." On the other hand, many of the created pieces of art are primarily aesthetic or amusing, and those can be enjoyed by the general public. === Digital installation art === Digital installation art constitutes a broad field of artistic practices and a variety of forms. Some resemble video installations, especially large-scale works involving projections and live video capture. By using projection techniques that enhance an audience's impression of sensory envelopment, many digital installations attempt to create immersive environments. While others go even further and attempt to facilitate a complete immersion in virtual realms. This type of installation is generally site-specific, scalable, and without fixed dimensionality, meaning it can be reconfigured to accommodate different presentation spaces. Scott Snibbe's "Boundary Functions" is an example of augmented reality digital installation art, which responds to people who enter the installation by drawing lines between people, indicating their personal space.Noah Wardrip-Fruin's "Screen"(2003) utilizes a Cave Automatic Virtual Environment (CAVE) to create an interactive, text-based digital experience that engages the viewer in a multi-sensory interaction. === Internet art and net.art === Internet art is digital art that uses the specific characteristics of the Internet and is exhibited on the Internet. The term "internet art" is included by "net art" for which artists assume that network will be refreshed through history. So the term "post-internet art" is used to exclude artworks outside of the internet media. A representative example is Protocols for Achievements, which is a digital photo frame that confronts the aestheti

  Read more →
• 

  Image analysis

  Image analysis or imagery analysis is the extraction of meaningful information from images; mainly from digital images by means of digital image processing techniques. Image analysis tasks can be as simple as reading bar coded tags or as sophisticated as identifying a person from their face. Computers are indispensable for the analysis of large amounts of data, for tasks that require complex computation, or for the extraction of quantitative information. On the other hand, the human visual cortex is an excellent image analysis apparatus, especially for extracting higher-level information, and for many applications — including medicine, security, and remote sensing — human analysts still cannot be replaced by computers. For this reason, many important image analysis tools such as edge detectors and neural networks are inspired by human visual perception models. == Digital == Digital Image Analysis or Computer Image Analysis is when a computer or electrical device automatically studies an image to obtain useful information from it. Note that the device is often a computer but may also be an electrical circuit, a digital camera or a mobile phone. It involves the fields of computer or machine vision, and medical imaging, and makes heavy use of pattern recognition, digital geometry, and signal processing. This field of computer science developed in the 1950s at academic institutions such as the MIT A.I. Lab, originally as a branch of artificial intelligence and robotics. It is the quantitative or qualitative characterization of two-dimensional (2D) or three-dimensional (3D) digital images. 2D images are, for example, to be analyzed in computer vision, and 3D images in medical imaging. The field was established in the 1950s—1970s, for example with pioneering contributions by Azriel Rosenfeld, Herbert Freeman, Jack E. Bresenham, or King-Sun Fu. == Techniques == There are many different techniques used in automatically analysing images. Each technique may be useful for a small range of tasks, however there still aren't any known methods of image analysis that are generic enough for wide ranges of tasks, compared to the abilities of a human's image analysing capabilities. Examples of image analysis techniques in different fields include: 2D and 3D object recognition, image segmentation, motion detection e.g. Single particle tracking, video tracking, optical flow, medical scan analysis, 3D Pose Estimation. == Deep learning == Since the early 2010s, deep learning methods have substantially advanced the field of image analysis. In 2012, a deep convolutional neural network (CNN) known as AlexNet achieved a significant reduction in error rates on the ImageNet large-scale image classification benchmark, demonstrating the effectiveness of deep learning for visual recognition tasks. Subsequent architectures such as ResNet introduced residual connections that enabled training of much deeper networks, further improving accuracy across image analysis tasks. Real-time object detection became practical with frameworks such as YOLO (You Only Look Once), which unified detection and classification into a single network pass. In 2020, the Vision Transformer (ViT) demonstrated that transformer architectures, originally developed for natural language processing, could achieve competitive results on image classification when applied directly to sequences of image patches. More recently, foundation models trained on large-scale datasets have enabled zero-shot generalisation across image analysis tasks. The Segment Anything Model (SAM), trained on over one billion masks, can segment arbitrary objects in images without task-specific fine-tuning. These advances have made image analysis techniques increasingly accessible through browser-based tools and open-source implementations. == Applications == The applications of digital image analysis are continuously expanding through all areas of science and industry, including: anatomy, allows for precise measurements, visualization, and statistical analysis of anatomical structures. assay micro plate reading, such as detecting where a chemical was manufactured. astronomy, such as calculating the size of a planet. automated species identification (e.g. plant and animal species) defense error level analysis filtering machine vision, such as to automatically count items in a factory conveyor belt. materials science, such as determining if a metal weld has cracks. medicine, such as detecting cancer in a mammography scan. metallography, such as determining the mineral content of a rock sample. microscopy, such as counting the germs in a swab. automatic number plate recognition; optical character recognition, such as automatic license plate detection. remote sensing, such as detecting intruders in a house, and producing land cover/land use maps. robotics, such as to avoid steering into an obstacle. security, such as detecting a person's eye color or hair color. == Object-based == Object-based image analysis (OBIA) involves two typical processes, segmentation and classification. Segmentation helps to group pixels into homogeneous objects. The objects typically correspond to individual features of interest, although over-segmentation or under-segmentation is very likely. Classification then can be performed at object levels, using various statistics of the objects as features in the classifier. Statistics can include geometry, context and texture of image objects. Over-segmentation is often preferred over under-segmentation when classifying high-resolution images. Object-based image analysis has been applied in many fields, such as cell biology, medicine, earth sciences, and remote sensing. For example, it can detect changes of cellular shapes in the process of cell differentiation.; it has also been widely used in the mapping community to generate land cover. When applied to earth images, OBIA is known as geographic object-based image analysis (GEOBIA), defined as "a sub-discipline of geoinformation science devoted to (...) partitioning remote sensing (RS) imagery into meaningful image-objects, and assessing their characteristics through spatial, spectral and temporal scale". The international GEOBIA conference has been held biannually since 2006. OBIA techniques are implemented in software such as eCognition or the Orfeo toolbox.

  Read more →
• 

  AVS Video Editor

  AVS Video Editor is a video editing software published by Online Media Technologies Ltd. It is a part of AVS4YOU software suite which includes video, audio, image editing and conversion, disc editing and burning, document conversion and registry cleaner programs. It offers the opportunity to create and edit videos with a vast variety of video and audio effects, text and transitions; capture video from screen, web or DV cameras and VHS tape; record voice; create menus for discs, as well as to save them to plenty of video file formats, burn to discs or publish on Facebook, YouTube, Flickr, etc. == Description == === Interface === The layout consists of the timeline or storyboard view, preview pane and media library (transitions, video effects, text or disc menus) collections. The storyboard view shows the sequence of video clips with the transitions between them and used to change the order of clips or add transitions. Timeline view consists of main video, audio, effects, video overlay and text lines for editing. Once on the timeline video can be duplicated, split, muted, frozen, cropped, stabilized, its speed can be slowed down or increased, audio and color corrected. === Importing footage === Video, audio and image files necessary for video project can be imported into the program from computer hard disk drive. User can also capture video from computer screen, web or mini DV camera, as well as from VHS tape, record voice. === Output (web, device, disc, format) === AVS Video Editor gives the opportunity to save video to a computer hard drive to one of the video formats: AVI, DVD, Blu-ray, MOV, MP4, M4V, MPEG, WMV, MKV, WebM, M2TS, TS, FLV, SWF, RM, 3GP, GIF, DPG, AMV, MTV; burn to DVD or Blu-ray disc with menus; create a video for mobile players, mobile phones or gaming consoles and upload it right to the device. The most popular devices such as Apple iPod, Apple iPhone, Apple iPad, Sony PSP, Samsung Galaxy, Android and BlackBerry smartphones and tablets are supported. There is also an option to create a video that can be streamed via web and save it into Flash or WebM format or for the popular web services: YouTube, Facebook, Telly (Twitvid), Dailymotion, Flickr and Dropbox. === Features === Single and multithread modes: if a computer supports multi-threading, video creation process is performed faster in multithread mode, especially on a multi-core system. Customization of the output file settings, such as bitrate, frame rate, frame size, video and audio codecs, etc. Transitions - help video clips smoothly go into one another, dissolve or overlap two video or image files. Fade in and fade out video and audio files - dissolve a video to and from a blank image, reduce the audio volume at the end of the video and increase at the beginning. Slideshow creation - create a presentation of a series of still images. Voice recording Projects - once a project is created and saved, the next time saving video to some other format will be fast, projects are also used if a user do not have a possibility to create, edit and save video all at once. Video overlay option - superpose video image over the video clip that is being edited. Disk menu and chapters creation - an option for DVD and Blu-ray video. Freeze frame - make a still shot from a video clip. Stabilization feature - reduce jittering or blurring caused by shaky motions of a camera. Enhanced deinterlacing method - increase video quality for interlaced input file - spots and blurred areas are compensated. Scene detection - search and separate one scene of the video from the other. Loop DVD and SWF - output SWF and DVD video are played back continuously. Caching for processing high definition files - create a duplicate video file smaller in size to use it on the preview window and accelerate processing of HD files. Chroma key option - add video overlay half transparent so that only part of it is visible and all the rest disappears to reveal the video underneath. Capture video material from DV tapes, VHS tapes, web cameras, etc. Movie closing credits - add information on movie editing, e.g. crew, cast, data, etc. Creeping line, subtitles, text - add different captions (static and animated), shapes and images to video. Speech balloons and other graphic objects - geometrical shapes to highlight an object in the video. Zoom effect - magnify or reduce the view of the image. Rotate effect - rotate video image at different degrees, e.g. 90, 180, etc. Grayscale and old movie effects - create a black and white video image. Old movie adds also scratches, noise, shake and dust to video, as if it's being played on an old projector. Blur and sharpen effects - visually smooth and soften an image, or make video image better focused. Snow and particles effects - adds snow or various objects (bubbles, flowers, leaves, butterflies etc.) that are moving, flying or falling on the video. Pan and zoom Timer, countdown effects - add a timepiece that measures or counts down a time interval to the video being edited. Snapshots - capture a particular moment of a video clip. Sound track replacement - mute audio track from video and add another one. Audio amplify, noise removal, equalizer, etc. - make video sound louder, attenuate the noise, change frequency pattern of the audio, make some other audio adjustments. Trim and multi-trim options - change video clip duration cutting out unnecessary parts or detect scenes and cut out parts in any place of the video clip. Color correction (brightness, temperature, contrast, saturation, gamma, etc.) effects - allow adjustment of tonal range, color, and sharpness of video files. Crop scale effect - get rid of mattes that appear after changing aspect ratio of a video file. Adjusting the Playback Speed Volume and balance - change sound volume in the output video. Change volume value proportion for main video and added soundtrack, completely mute main video audio and leave added soundtrack only, etc. === Utilities embedded into AVS Video Editor === AVS Mobile Uploader is used to transfer edited and converted media files to portable devices via Bluetooth, Infrared or USB connection. AVS Video Burner is used to burn converted video files to different disc types: CD, DVD, Blu-ray. AVS Video Recorder is used to capture video from analog video sources and supports different types of devices: capture card, web camera (webcam), DV camera, HDV camera. AVS Video Uploader is used to transfer video files to popular video-sharing websites, like Facebook, Dailymotion, YouTube, Photobucket, TwitVid, MySpace, Flickr. AVS Screen Capture is used to capture any actions on the desktop to make presentations or video tutorials more vivid and easily comprehensible. == Important upgrades == The initial release of AVS Video Editor was in 2003 when the program was offered inside AVS software bundles together with AVS Video Tools, AVS Audio Tools and DVD Copy software. In 2005 the program is offered as a part of multifunctional AVS4YOU software suite. AVS Video Editor is frequently updated. The main updates include adding several important features for video editing

  Read more →
• 

  Avizo (software)

  Avizo (pronounce: 'a-VEE-zo') is a general-purpose commercial software application for scientific and industrial data visualization and analysis. Avizo is developed by Thermo Fisher Scientific and was originally designed and developed by the Visualization and Data Analysis Group at Zuse Institute Berlin (ZIB) under the name Amira. Avizo was commercially released in November 2007. For the history of its development, see the Wikipedia article about Amira. == Overview == Avizo is a software application which enables users to perform interactive visualization and computation on 3D data sets. The Avizo interface is modelled on the visual programming. Users manipulate data and module components, organized in an interactive graph representation (called Pool), or in a Tree view. Data and modules can be interactively connected together, and controlled with several parameters, creating a visual processing network whose output is displayed in a 3D viewer. With this interface, complex data can be interactively explored and analyzed by applying a controlled sequence of computation and display processes resulting in a meaningful visual representation and associated derived data. == Application areas == Avizo has been designed to support different types of applications and workflows from 2D and 3D image data processing to simulations. It is a versatile and customizable visualization tool used in many fields: Scientific visualization Materials Research Tomography, Microscopy, etc. Nondestructive testing, Industrial Inspection, and Visual Inspection Computer-aided Engineering and simulation data post-processing Porous medium analysis Civil Engineering Seismic Exploration, Reservoir Engineering, Microseismic Monitoring, Borehole Imaging Geology, Digital Rock Physics (DRP), Earth Sciences Archaeology Food technology and agricultural science Physics, Chemistry Climatology, Oceanography, Environmental Studies Astrophysics == Features == Data import: 2D and 3D image stack and volume data: from microscopes (electron, optical), X-ray tomography (CT, micro-/nano-CT, synchrotron), neutron tomography and other acquisition devices (MRI, radiography, GPR) Geometric models (such as point sets, line sets, surfaces, grids) Numerical simulation data (such as Computational fluid dynamics or Finite element analysis data) Molecular data Time series and animations Seismic data Well logs 4D Multivariate Climate Models 2D/3D data visualization: Volume rendering Digital Volume Correlation Visualization of sections, through various slicing and clipping methods Isosurface rendering Polygonal meshes Scalar fields, Vector fields, Tensor representations, Flow visualization (Illuminated Streamlines, Stream Ribbons) Image processing: 2D/3D Alignment of image slices, Image registration Image filtering Mathematical Morphology (erode, dilate, open, close, tophat) Watershed Transform, Distance Transform Image segmentation 3D models reconstruction: Polygonal surface generation from segmented objects Generation of tetrahedral grids Surface reconstruction from point clouds Skeletonization (reconstruction of dendritic, porous or fracture network) Surface model simplification Quantification and analysis: Measurements and statistics Analysis spreadsheet and charting Material properties computation, based on 3D images: Absolute permeability Thermal conductivity Molecular diffusivity Electrical resistivity/formation factor 3D image-based meshing for CFD and FEA: From 3D imaging modalities (CT, micro-CT, MRI, etc.) Surface and volume meshes generation Export to FEA and CFD solvers for simulation Post-processing for simulation analysis Presentation, automation: MovieMaker, Multiscreen, Video wall, collaboration, and VR support TCL Scripting, C++ extension API Avizo is based on Open Inventor 3D graphics toolkits (FEI Visualization Sciences Group).

  Read more →