AI Assistant List

AI Assistant List — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Sample complexity

    Sample complexity

    The sample complexity of a machine learning algorithm represents the number of training-samples that it needs in order to successfully learn a target function. More precisely, the sample complexity is the number of training-samples that we need to supply to the algorithm, so that the function returned by the algorithm is within an arbitrarily small error of the best possible function, with probability arbitrarily close to 1. There are two variants of sample complexity: The weak variant fixes a particular input-output distribution; The strong variant takes the worst-case sample complexity over all input-output distributions. The No free lunch theorem, discussed below, proves that, in general, the strong sample complexity is infinite, i.e. that there is no algorithm that can learn the globally-optimal target function using a finite number of training samples. However, if we are only interested in a particular class of target functions (e.g., only linear functions) then the sample complexity is finite, and it depends linearly on the VC dimension on the class of target functions. == Definition == Let X {\displaystyle X} be a space which we call the input space, and Y {\displaystyle Y} be a space which we call the output space, and let Z {\displaystyle Z} denote the product X × Y {\displaystyle X\times Y} . For example, in the setting of binary classification, X {\displaystyle X} is typically a finite-dimensional vector space and Y {\displaystyle Y} is the set { − 1 , 1 } {\displaystyle \{-1,1\}} . Fix a hypothesis space H {\displaystyle {\mathcal {H}}} of functions h : X → Y {\displaystyle h\colon X\to Y} . A learning algorithm over H {\displaystyle {\mathcal {H}}} is a computable map from Z {\displaystyle Z} to H {\displaystyle {\mathcal {H}}} . In other words, it is an algorithm that takes as input a finite sequence of training samples and outputs a function from X {\displaystyle X} to Y {\displaystyle Y} . Typical learning algorithms include empirical risk minimization, without or with Tikhonov regularization. Fix a loss function L : Y × Y → R ≥ 0 {\displaystyle {\mathcal {L}}\colon Y\times Y\to \mathbb {R} _{\geq 0}} , for example, the square loss L ( y , y ′ ) = ( y − y ′ ) 2 {\displaystyle {\mathcal {L}}(y,y')=(y-y')^{2}} , where h ( x ) = y ′ {\displaystyle h(x)=y'} . For a given distribution ρ {\displaystyle \rho } on X × Y {\displaystyle X\times Y} , the expected risk of a hypothesis (a function) h ∈ H {\displaystyle h\in {\mathcal {H}}} is E ( h ) := E ρ [ L ( h ( x ) , y ) ] = ∫ X × Y L ( h ( x ) , y ) d ρ ( x , y ) {\displaystyle {\mathcal {E}}(h):=\mathbb {E} _{\rho }[{\mathcal {L}}(h(x),y)]=\int _{X\times Y}{\mathcal {L}}(h(x),y)\,d\rho (x,y)} In our setting, we have h = A ( S n ) {\displaystyle h={\mathcal {A}}(S_{n})} , where A {\displaystyle {\mathcal {A}}} is a learning algorithm and S n = ( ( x 1 , y 1 ) , … , ( x n , y n ) ) ∼ ρ n {\displaystyle S_{n}=((x_{1},y_{1}),\ldots ,(x_{n},y_{n}))\sim \rho ^{n}} is a sequence of vectors which are all drawn independently from ρ {\displaystyle \rho } . Define the optimal risk E H ∗ = inf h ∈ H E ( h ) . {\displaystyle {\mathcal {E}}_{\mathcal {H}}^{}={\underset {h\in {\mathcal {H}}}{\inf }}{\mathcal {E}}(h).} Set h n = A ( S n ) {\displaystyle h_{n}={\mathcal {A}}(S_{n})} , for each sample size n {\displaystyle n} . h n {\displaystyle h_{n}} is a random variable and depends on the random variable S n {\displaystyle S_{n}} , which is drawn from the distribution ρ n {\displaystyle \rho ^{n}} . The algorithm A {\displaystyle {\mathcal {A}}} is called consistent if E ( h n ) {\displaystyle {\mathcal {E}}(h_{n})} probabilistically converges to E H ∗ {\displaystyle {\mathcal {E}}_{\mathcal {H}}^{}} . In other words, for all ϵ , δ > 0 {\displaystyle \epsilon ,\delta >0} , there exists a positive integer N {\displaystyle N} , such that, for all sample sizes n ≥ N {\displaystyle n\geq N} , we have Pr ρ n [ E ( h n ) − E H ∗ ≥ ε ] < δ . {\displaystyle \Pr _{\rho ^{n}}[{\mathcal {E}}(h_{n})-{\mathcal {E}}_{\mathcal {H}}^{}\geq \varepsilon ]<\delta .} The sample complexity of A {\displaystyle {\mathcal {A}}} is then the minimum N {\displaystyle N} for which this holds, as a function of ρ , ϵ {\displaystyle \rho ,\epsilon } , and δ {\displaystyle \delta } . We write the sample complexity as N ( ρ , ϵ , δ ) {\displaystyle N(\rho ,\epsilon ,\delta )} to emphasize that this value of N {\displaystyle N} depends on ρ , ϵ {\displaystyle \rho ,\epsilon } , and δ {\displaystyle \delta } . If A {\displaystyle {\mathcal {A}}} is not consistent, then we set N ( ρ , ϵ , δ ) = ∞ {\displaystyle N(\rho ,\epsilon ,\delta )=\infty } . If there exists an algorithm for which N ( ρ , ϵ , δ ) {\displaystyle N(\rho ,\epsilon ,\delta )} is finite, then we say that the hypothesis space H {\displaystyle {\mathcal {H}}} is learnable. In others words, the sample complexity N ( ρ , ϵ , δ ) {\displaystyle N(\rho ,\epsilon ,\delta )} defines the rate of consistency of the algorithm: given a desired accuracy ϵ {\displaystyle \epsilon } and confidence δ {\displaystyle \delta } , one needs to sample N ( ρ , ϵ , δ ) {\displaystyle N(\rho ,\epsilon ,\delta )} data points to guarantee that the risk of the output function is within ϵ {\displaystyle \epsilon } of the best possible, with probability at least 1 − δ {\displaystyle 1-\delta } . In probably approximately correct (PAC) learning, one is concerned with whether the sample complexity is polynomial, that is, whether N ( ρ , ϵ , δ ) {\displaystyle N(\rho ,\epsilon ,\delta )} is bounded by a polynomial in 1 / ϵ {\displaystyle 1/\epsilon } and 1 / δ {\displaystyle 1/\delta } . If N ( ρ , ϵ , δ ) {\displaystyle N(\rho ,\epsilon ,\delta )} is polynomial for some learning algorithm, then one says that the hypothesis space H {\displaystyle {\mathcal {H}}} is PAC-learnable. This is a stronger notion than being learnable. == Unrestricted hypothesis space: infinite sample complexity == One can ask whether there exists a learning algorithm so that the sample complexity is finite in the strong sense, that is, there is a bound on the number of samples needed so that the algorithm can learn any distribution over the input-output space with a specified target error. More formally, one asks whether there exists a learning algorithm A {\displaystyle {\mathcal {A}}} , such that, for all ϵ , δ > 0 {\displaystyle \epsilon ,\delta >0} , there exists a positive integer N {\displaystyle N} such that for all n ≥ N {\displaystyle n\geq N} , we have sup ρ ( Pr ρ n [ E ( h n ) − E H ∗ ≥ ε ] ) < δ , {\displaystyle \sup _{\rho }\left(\Pr _{\rho ^{n}}[{\mathcal {E}}(h_{n})-{\mathcal {E}}_{\mathcal {H}}^{}\geq \varepsilon ]\right)<\delta ,} where h n = A ( S n ) {\displaystyle h_{n}={\mathcal {A}}(S_{n})} , with S n = ( ( x 1 , y 1 ) , … , ( x n , y n ) ) ∼ ρ n {\displaystyle S_{n}=((x_{1},y_{1}),\ldots ,(x_{n},y_{n}))\sim \rho ^{n}} as above. The No Free Lunch Theorem says that without restrictions on the hypothesis space H {\displaystyle {\mathcal {H}}} , this is not the case, i.e., there always exist "bad" distributions for which the sample complexity is arbitrarily large. Thus, in order to make statements about the rate of convergence of the quantity sup ρ ( Pr ρ n [ E ( h n ) − E H ∗ ≥ ε ] ) , {\displaystyle \sup _{\rho }\left(\Pr _{\rho ^{n}}[{\mathcal {E}}(h_{n})-{\mathcal {E}}_{\mathcal {H}}^{}\geq \varepsilon ]\right),} one must either constrain the space of probability distributions ρ {\displaystyle \rho } , e.g. via a parametric approach, or constrain the space of hypotheses H {\displaystyle {\mathcal {H}}} , as in distribution-free approaches. == Restricted hypothesis space: finite sample-complexity == The latter approach leads to concepts such as VC dimension and Rademacher complexity which control the complexity of the space H {\displaystyle {\mathcal {H}}} . A smaller hypothesis space introduces more bias into the inference process, meaning that E H ∗ {\displaystyle {\mathcal {E}}_{\mathcal {H}}^{}} may be greater than the best possible risk in a larger space. However, by restricting the complexity of the hypothesis space it becomes possible for an algorithm to produce more uniformly consistent functions. This trade-off leads to the concept of regularization. It is a theorem from VC theory that the following three statements are equivalent for a hypothesis space H {\displaystyle {\mathcal {H}}} : H {\displaystyle {\mathcal {H}}} is PAC-learnable. The VC dimension of H {\displaystyle {\mathcal {H}}} is finite. H {\displaystyle {\mathcal {H}}} is a uniform Glivenko-Cantelli class. This gives a way to prove that certain hypothesis spaces are PAC learnable, and by extension, learnable. === An example of a PAC-learnable hypothesis space === X = R d , Y = { − 1 , 1 } {\displaystyle X=\mathbb {R} ^{d},Y=\{-1,1\}} , and let H {\displaystyle {\mathcal {H}}} be the space of affine functions on X {\displaystyle X} , that is, functions of the form x ↦ ⟨ w , x ⟩ + b {\displaystyle x\mapsto \langl

    Read more →
  • Magic Quadrant

    Magic Quadrant

    Magic Quadrant (MQ) is a series of market research reports published by research and advisory firm Gartner that rely on proprietary qualitative data analysis methods to demonstrate market trends, such as direction, maturity, and participants. Their analyses are conducted for several specific technology industries and are updated every 1–2 years: once an updated report has been published, its predecessor is "retired". == Rating == Gartner rates vendors upon two criteria: completeness of vision and ability to execute. Completeness of vision – Reflects the vendor's innovation, and whether the vendor drives or follows the market. Ability to execute – Summarizes factors such as the vendor's financial viability, market responsiveness, product development, sales channels and customer base. The two component scores lead to a vendor position in one of four quadrants: === Leaders === Vendors in the "Leaders" quadrant have the highest composite scores for their completeness of vision and ability to execute. A vendor in the Leaders quadrant has the market share, credibility, and marketing & sales capabilities needed to drive the acceptance of new technologies. These vendors demonstrate a clear understanding of market needs, they are innovators and thought leaders, and they have well-articulated plans that customers and prospects can use when designing their infrastructures and strategies. In addition, they have a presence in the five major geographical regions, consistent financial performance, and broad platform support. === Challengers === Vendors in the "Challengers" quadrant have high scores mainly for their ability to execute. They both participate in the market and execute well enough to be a serious threat to vendors in the "Leaders" quadrant. They have strong products, as well as sufficiently credible market position and resources to sustain continued growth. Financial viability is not an issue for vendors in the "Challengers" quadrant, but they lack the size and influence of vendors in the "Leaders" quadrant due to their relative lack of vision. === Visionaries === Vendors in the "Visionaries" quadrant have high scores mainly for their completeness of vision. They deliver innovative products that address operationally or financially important end-user problems at a broad scale, but have not yet demonstrated the ability to capture market share or maintain sustainable levels of profitability. Visionary vendors are frequently privately held companies and acquisition targets for larger, established companies. The likelihood of acquisition often reduces the risks associated with installing their systems. === Niche Players === Vendors in the "Niche Players" quadrant have relatively low scores for both their ability to execute and their completeness of vision. They are often narrowly focused on specific market or vertical segments. This quadrant often also includes vendors that are adapting their existing products to enter the market under consideration, or larger vendors having difficulty developing and executing on their vision. == Gartner Critical Capabilities == Gartner Critical Capabilities complement Magic Quadrant analysis to offer deeper insight into the products and services offered by multiple vendors by a comparative analysis that scores competing products or services against a set of critical differentiators identified by Gartner. Gartner has periodically ended Magic Quadrant listings for IT Service Management, Web Content Management, and other industries as those markets have fully matured or other factors rendered the analytic framework inapplicable. == Criticism == The Magic Quadrant, and analysts in general, skew the market: according to research, by applying their methodologies to describe a market, they change that marketplace to fit their tools. Another criticism is that open source vendors are not considered sufficiently by analysts like Gartner, as has been published in an online discussion between a VP from Talend and a German Research VP from Gartner. On May 29, 2009 (2009-05-29), software vendor ZL Technologies filed a federal lawsuit against Gartner that challenged the "legitimacy" of Gartner's Magic Quadrant rating system. Gartner filed a motion to dismiss by claiming First Amendment protection since it contends that its MQ reports contain "pure opinion", which legally means opinions that are not based on fact. The court threw out the ZL case because it lacked a specific complaint. The decision was upheld on appeal.

    Read more →
  • Vinelink.com

    Vinelink.com

    Vinelink.com (VINE) is a national website in the United States that allows victims of crime, and the general public, to track the movements of prisoners held by the various states and territories. The first four letters in the websites name, "vine", are an acronym for "Victim Information and Notification Everyday". Vinelink.com displays information, based on the information provided by the various states' departments of correction and other law enforcement agencies, on whether an inmate is in custody, has been released, has been granted parole or probation, or has escaped from custody. In some cases, the website will reveal whether a defendant has been granted parole or probation, but then subsequently violated conditions of their release and become a fugitive. Information provided on Vinelink.com represents metadata, in that the website lists a defendant's custody status; but does not list what the individual is charged with, their criminal history, or the amount of their bail, if applicable. Internet users accessing the Vinelink.com website choose from a map of states and provinces within the United States where they wish to perform a search for an inmate. The user may then search for an individual using the inmate's or parolee's name, or by entering the inmate's specific department of corrections inmate number, if known. When the inmate's custody status changes, users who have registered to be notified of such changes will be notified via email, phone or both. This information is currently released upon request, without the website requesting reasons for the users search or requiring payment, as public records available to the general public. Inmate information is available for most states, and for Puerto Rico, on the website. The states of Arizona, Georgia, Massachusetts, Montana, New Hampshire and West Virginia provide very limited information on the site. In March of 2025, The Maine Sheriff's Association entered into a contract to pilot the use of the VINE system in three counties in the state as well as a regional jail, therefore making South Dakota the only state that does not participate in the VINE system to any degree. The website does not provide data on prisoners detained by the Federal Bureau of Prisons which has its own inmate locator web site nor for inmates of the U.S. military prisons.

    Read more →
  • Enumeration algorithm

    Enumeration algorithm

    In computer science, an enumeration algorithm is an algorithm that enumerates the answers to a computational problem. Formally, such an algorithm applies to problems that take an input and produce a list of solutions, similarly to function problems. For each input, the enumeration algorithm must produce the list of all solutions, without duplicates, and then halt. The performance of an enumeration algorithm is measured in terms of the time required to produce the solutions, either in terms of the total time required to produce all solutions, or in terms of the maximal delay between two consecutive solutions and in terms of a preprocessing time, counted as the time before outputting the first solution. This complexity can be expressed in terms of the size of the input, the size of each individual output, or the total size of the set of all outputs, similarly to what is done with output-sensitive algorithms. == Formal definitions == An enumeration problem P {\displaystyle P} is defined as a relation R {\displaystyle R} over strings of an arbitrary alphabet Σ {\displaystyle \Sigma } : R ⊆ Σ ∗ × Σ ∗ {\displaystyle R\subseteq \Sigma ^{}\times \Sigma ^{}} An algorithm solves P {\displaystyle P} if for every input x {\displaystyle x} the algorithm produces the (possibly infinite) sequence y {\displaystyle y} such that y {\displaystyle y} has no duplicate and z ∈ y {\displaystyle z\in y} if and only if ( x , z ) ∈ R {\displaystyle (x,z)\in R} . The algorithm should halt if the sequence y {\displaystyle y} is finite. == Common complexity classes == Enumeration problems have been studied in the context of computational complexity theory, and several complexity classes have been introduced for such problems. A very general such class is EnumP, the class of problems for which the correctness of a possible output can be checked in polynomial time in the input and output. Formally, for such a problem, there must exist an algorithm A which takes as input the problem input x, the candidate output y, and solves the decision problem of whether y is a correct output for the input x, in polynomial time in x and y. For instance, this class contains all problems that amount to enumerating the witnesses of a problem in the class NP. Other classes that have been defined include the following. In the case of problems that are also in EnumP, these problems are ordered from least to most specific: Output polynomial, the class of problems whose complete output can be computed in polynomial time. Incremental polynomial time, the class of problems where, for all i, the i-th output can be produced in polynomial time in the input size and in the number i. Polynomial delay, the class of problems where the delay between two consecutive outputs is polynomial in the input (and independent from the output). Strongly polynomial delay, the class of problems where the delay before each output is polynomial in the size of this specific output (and independent from the input or from the other outputs). The preprocessing is generally assumed to be polynomial. Constant delay, the class of problems where the delay before each output is constant, i.e., independent from the input and output. The preprocessing phase is generally assumed to be polynomial in the input. == Common techniques == Backtracking: The simplest way to enumerate all solutions is by systematically exploring the space of possible results (partitioning it at each successive step). However, performing this may not give good guarantees on the delay, i.e., a backtracking algorithm may spend a long time exploring parts of the space of possible results that do not give rise to a full solution. Flashlight search: This technique improves on backtracking by exploring the space of all possible solutions but solving at each step the problem of whether the current partial solution can be extended to a partial solution. If the answer is no, then the algorithm can immediately backtrack and avoid wasting time, which makes it easier to show guarantees on the delay between any two complete solutions. In particular, this technique applies well to self-reducible problems. Closure under set operations: If we wish to enumerate the disjoint union of two sets, then we can solve the problem by enumerating the first set and then the second set. If the union is non disjoint but the sets can be enumerated in sorted order, then the enumeration can be performed in parallel on both sets while eliminating duplicates on the fly. If the union is not disjoint and both sets are not sorted then duplicates can be eliminated at the expense of a higher memory usage, e.g., using a hash table. Likewise, the cartesian product of two sets can be enumerated efficiently by enumerating one set and joining each result with all results obtained when enumerating the second step. == Examples of enumeration problems == The vertex enumeration problem, where we are given a polytope described as a system of linear inequalities and we must enumerate the vertices of the polytope. Enumerating the minimal transversals of a hypergraph. This problem is related to monotone dualization and is connected to many applications in database theory and graph theory. Enumerating the answers to a database query, for instance a conjunctive query or a query expressed in monadic second-order. There have been characterizations in database theory of which conjunctive queries could be enumerated with linear preprocessing and constant delay. The problem of enumerating maximal cliques in an input graph, e.g., with the Bron–Kerbosch algorithm Listing all elements of structures such as matroids and greedoids Several problems on graphs, e.g., enumerating independent sets, paths, cuts, etc. Enumerating the satisfying assignments of representations of Boolean functions, e.g., a Boolean formula written in conjunctive normal form or disjunctive normal form, a binary decision diagram such as an OBDD, or a Boolean circuit in restricted classes studied in knowledge compilation, e.g., NNF. == Connection to computability theory == The notion of enumeration algorithms is also used in the field of computability theory to define some high complexity classes such as RE, the class of all recursively enumerable problems. This is the class of sets for which there exist an enumeration algorithm that will produce all elements of the set: the algorithm may run forever if the set is infinite, but each solution must be produced by the algorithm after a finite time.

    Read more →
  • Attensity

    Attensity

    Attensity was an American company that provided social analytics and engagement applications for social customer relationship management (social CRM). Attensity's text analytics software applications extracted facts, relationships and sentiment from unstructured data. == History == Attensity was founded in 2000. An early investor in Attensity was In-Q-Tel, which funds technology to support the missions of the US Government and the broader DOD. InTTENSITY, an independent company that has combined Inxight with Attensity Software (the only joint development project that combines two InQTel funded software packages), was the exclusive distributor and outlet for Attensity in the Federal Market. In 2009, Attensity Corp., then based in Palo Alto, merged with Germany's Empolis and Living-e AG to form Attensity Group. In 2010, Attensity Group acquired Biz360, a provider of social media monitoring and market intelligence solutions. In early 2012, Attensity Group divested itself of the Empolis business unit via a management buyout; that unit currently conducts business under its pre-merger name. Attensity Group was a closely held private company. Its majority shareholder was Aeris Capital, a private Swiss investment office advising a high-net-worth individual and his charitable foundation. Foundation Capital, Granite Ventures, and Scale Venture Partners were among Biz360's investors and thus became shareholders in Attensity Group. In February 2016, Attensity's IP assets were acquired by InContact, and Attensity closed.

    Read more →
  • Driver scheduling problem

    Driver scheduling problem

    The driver scheduling problem (DSP) is type of problem in operations research and theoretical computer science. The DSP consists of selecting a set of duties (assignments) for the drivers or pilots of vehicles (e.g., buses, trains, boats, or planes) involved in the transportation of passengers or goods, within the constraints of various legislative and logistical criteria. == Criteria and modelling == This very complex problem involves several constraints related to labour and company rules and also different evaluation criteria and objectives. Being able to solve this problem efficiently can have a great impact on costs and quality of service for public transportation companies. There is a large number of different rules that a feasible duty might be required to satisfy, such as Minimum and maximum stretch duration Minimum and maximum break duration Minimum and maximum work duration Minimum and maximum total duration Maximum extra work duration Maximum number of vehicle changes Minimum driving duration of a particular vehicle Operations research has provided optimization models and algorithms that lead to efficient solutions for this problem. Among the most common models proposed to solve the DSP are the Set Covering and Set Partitioning Models (SPP/SCP). In the SPP model, each work piece (task) is covered by only one duty. In the SCP model, it is possible to have more than one duty covering a given work piece. In both models, the set of work pieces that needs to be covered is laid out in rows, and the set of previously defined feasible duties available for covering specific work pieces is arranged in columns. The DSP resolution, based on either of these models, is the selection of the set of feasible duties that guarantees that there is one (SPP) or more (SCP) duties covering each work piece while minimizing the total cost of the final schedule.

    Read more →
  • EdgeRank

    EdgeRank

    EdgeRank is the name commonly given to the algorithm that Facebook uses to determine what articles should be displayed in a user's News Feed. As of 2011, Facebook has stopped using the EdgeRank system and uses a machine learning algorithm that, as of 2013, takes more than 100,000 factors into account. EdgeRank was developed and implemented by Serkan Piantino. == Formula and factors == In 2010, a simplified version of the EdgeRank algorithm was presented as: ∑ e d g e s e u e w e d e {\displaystyle \sum _{\mathrm {edges\,} e}u_{e}w_{e}d_{e}} where: u e {\displaystyle u_{e}} is user affinity. w e {\displaystyle w_{e}} is how the content is weighted. d e {\displaystyle d_{e}} is a time-based decay parameter. User Affinity: The User Affinity part of the algorithm in Facebook's EdgeRank looks at the relationship and proximity of the user and the content (post/status update). Content Weight: What action was taken by the user on the content. Time-Based Decay Parameter: New or old. Newer posts tend to hold a higher place than older posts. Some of the methods that Facebook uses to adjust the parameters are proprietary and not available to the public. A study has shown that it is possible to hypothesize a disadvantage of the "like" reaction and advantages of other interactions (e.g., the "haha" reaction or "comments") in content algorithmic ranking on Facebook. The "like" button can decrease the organic reach as a "brake effect of viral reach". The "haha" reaction, "comments" and the "love" reaction could achieve the highest increase in total organic reach. == Impact == EdgeRank and its successors have a broad impact on what users actually see out of what they ostensibly follow: for instance, the selection can produce a filter bubble (if users are exposed to updates which confirm their opinions etc.) or alter people's mood (if users are shown a disproportionate amount of positive or negative updates). As a result, for Facebook pages, the typical engagement rate is less than 1% (or less than 0.1% for the bigger ones), and organic reach 10% or less for most non-profits. As a consequence, for pages, it may be nearly impossible to reach any significant audience without paying to promote their content.

    Read more →
  • Investigative Data Warehouse

    Investigative Data Warehouse

    Investigative Data Warehouse (IDW) is a searchable database operated by the FBI. It was created in 2004. Much of the nature and scope of the database is classified. The database is a centralization of multiple federal and state databases, including criminal records from various law enforcement agencies, the U.S. Department of the Treasury's Financial Crimes Enforcement Network (FinCEN), and public records databases. According to Michael Morehart's testimony before the House Committee on Financial Services in 2006, the "IDW is a centralized, web-enabled, closed system repository for intelligence and investigative data. This system, maintained by the FBI, allows appropriately trained and authorized personnel throughout the country to query for information of relevance to investigative and intelligence matters." == Overview == In 2004, according to a government solicitation for bids to manage the project, it was approximately 10TB in size. In 2005, according to one FBI official, the IDW contained approximately 100 million documents. In 2006 it contained more than 560 million documents and was accessible by more than 12,000 individuals. According to the FBI's website, as of August 22, 2007, the database contained 700 million records from 53 databases and was accessible by 13,000 individuals around the world. As of 2007, the FBI was the subject of a lawsuit brought by the EFF (Electronic Frontier Foundation) because of a lack of public notice describing the database and the criteria for including personal information, as required by the Privacy Act of 1974. The lawsuits were a result of two Freedom of Information Act requests filed by the EFF in 2006. It was built in part by Chiliad corporation, the FBI Office of the Chief Technology Officer, and others. Companies listed on the FOIA files include Northrop Grumman . == Purpose == Investigative Data Warehouse–Secret (IDW-S) "provides data and data processing/analysis services to FBI agents and analysts as they perform counter-terrorism, counter-intelligence, and law enforcement missions". The core subsystem supports the Counter-Terrorism Division (CTD), the Special Event Unit, and via DOCLAB-S, the Joint Intelligence Committee Investigation (JICI) and IntelPlus. According to a 2005 email, "IDW will also be used for criminal and other authorized non-CT investigations as it evolves." (CT being counter terrorism) == Subsystems == Within the system, there were subsystems named IDW-S Core, SPT, and DOCLAB-S The special projects team (SPT): allows for the rapid import of new specialized data sources. These data sources are not made available to the general IDW users but instead are provided to a small group of users who have a demonstrated "need-to-know". The SPT System is similar in function to the IDW-S system, with the main difference is a different set of data sources. The SPT System allows its users to access not only the standard IDW Data Store but the specialized SPT Data Store. == Privacy == According to internal emails, the FBI performed several Privacy Impact Assessments (PIAs) of the IDW system. They worked with lawyers from their National Security Law Branch (NSLB) to attempt to make sure their system was complying with various laws regarding sharing of information and secrecy (for example, rule 6e of the Federal Rules of Criminal Procedure, regarding the secrecy of Grand Jury material ). The Information Sharing Policy Group (ISPG) formed a Discretionary Access Control Team (DACT), to work on "approval of data sets" and "access control requirements" for IDW and DataMart, and responding to other Intelligence Community agencies requesting access. The EFF FOIA IDW website states "Despite the vast amount of personal information contained in the IDW, the FBI has never published a Privacy Act notice describing the system or explaining the ways in which the records might be used." There was also a 2005 email from someone on the Office of General Council (OGC) about "preliminary staff musings that maybe we should limit FBI PIA requirements to non-NS systems" (NS being National Security). There was also an email from 2006 saying that 'national security systems are exempt from E-Gov', apparently referring to the E-Government Act of 2002, which has a section that deals with privacy. == Data sources == The IDW used many data sources. The FOIA documents from EFF are heavily redacted, but some of the sources are as follows: FBI Automated Case Support system (ACS), subset of the Electronic Case File (ECF) system Joint Intelligence Committee Investigation documents (JICI), with OCR text "Open Source News" (public websites, such as the Washington Post and others) Secure Automated Messaging Network (SAMNet) Violent Gang and Terrorist Organizing File (VGTOF) DARPA TIDES program ('open source news' that has been organized and collected) IntelPlus Filerooms, with OCR text FBI National Crime Information Center (NCIC) FBI Records Management Division (RMD), Document Laboratory (DocLab), FBIHQ MiTAP (collects data from public sources, websites, etc.) SPT-Specific data sources (partial list, FOIA files have large parts redacted): Unified Name Index (UNI) extracts Financial Center (FinCen), including Bank Secrecy Act data "Various Sources", including the Transportation Security Administration FBI Counterterrorism Division (CTD) Telephone numbers / addresses from ACS Case data from ACS Terrorist Watch List (TWL) "Other NJTTF data" DoS ... Lost/Stolen Passport data No Fly List, from TSA Selectee list, from TSA ACS/ECF with some case types excluded CIA non-TS/non-SCI Technical Discussions (TDs) and Intelligence Information Reports (IIRs) from 1978 to the May 2004 There was also talk of linking the FTTTF "Data Mart" with IDW. The data in IDW is classified at the 'Secret' level or lower. Higher classifications are not allowed, and can be removed

    Read more →
  • Foveated imaging

    Foveated imaging

    Foveated imaging is a digital image processing technique in which the image resolution, or amount of detail, varies across the image according to one or more "fixation points". A fixation point indicates the highest resolution region of the image and corresponds to the center of the eye's retina, the fovea. The location of a fixation point may be specified in many ways. For example, when viewing an image on a computer monitor, one may specify a fixation using a pointing device, like a computer mouse. Eye trackers which precisely measure the eye's position and movement are also commonly used to determine fixation points in perception experiments. When the display is manipulated with the use of an eye tracker, this is known as a gaze contingent display. Fixations may also be determined automatically using computer algorithms. Some common applications of foveated imaging include imaging sensor hardware and image compression. For descriptions of these and other applications, see the list below. Miniaturized foveated imaging systems can be realized by high-resolution 3D printing of multi-lens objectives directly on a CMOS (Complementary metal-oxide-semiconductor) chip. Foveated imaging is also commonly referred to as space variant imaging or gaze contingent imaging. == Applications == === Compression === Contrast sensitivity falls off dramatically as one moves from the center of the retina to the periphery. In lossy image compression, one may take advantage of this fact in order to compactly encode images. If one knows the viewer's approximate point of gaze, one may reduce the amount of information contained in the image as the distance from the point of gaze increases. Because the fall-off in the eye's resolution is dramatic, the potential reduction in display information can be substantial. Also, foveation encoding may be applied to the image before other types of image compression are applied and therefore can result in a multiplicative reduction. === Foveated sensors === Foveated sensors are multiresolution hardware devices that allow image data to be collected with higher resolution concentrated at a fixation point. An advantage to using foveated sensor hardware is that the image collection and encoding can occur much faster than in a system that post-processes a high resolution image in software. === Simulation === Foveated imaging has been used to simulate visual fields with arbitrary spatial resolution. For example, one may present video containing a blurred region representing a scotoma. By using an eye-tracker and holding the blurred region fixed relative to the viewer's gaze, the viewer will have a visual experience similar to that of a person with an actual scotoma. === Video gaming === Foveated rendering is a rendering optimization technique which uses an eye tracker integrated with a virtual reality headset to reduce the rendering workload by greatly reducing the image quality in the peripheral vision (outside of the zone gazed by the fovea).. However, other than the near-eye displays (e.g., virtual reality headset), foveated rendering is also suitable for large high-resolution display walls, desktop monitor, and even for smart phones. Over the time different foveated rendering techniques are proposed, for instance, adaptive resolution, geometric simplification, shading simplification and chromatic degradation, spatio-temporal deterioration . If we consider the variable sample distribution of physically-based rendering under the shader (e.g., hit/miss etc.), then this degradation strategies are applied on overall foveated rendering. At the CES 2016, SensoMotoric Instruments (SMI) demoed a new 250 Hz eye tracking system and a working foveated rendering solution. It resulted from a partnership with camera sensor manufacturer Omnivision who provided the camera hardware for the new system. The Apple Vision Pro mixed reality headset features dynamic foveated rendering provided by its visionOS operating system. === Quality assessment === Foveated imaging may be useful in providing a subjective image quality measure. Traditional image quality measures, such as peak signal-to-noise ratio, are typically performed on fixed resolution images and do not take into account some aspects of the human visual system, like the change in spatial resolution across the retina. A foveated quality index may therefore more accurately determine image quality as perceived by humans. === Image database retrieval === In databases that contain very high resolution images, such as a satellite image database, it may be desirable to interactively retrieve images in order to reduce retrieval time. Foveated imaging allows one to scan low resolution images and retrieve only high resolution portions as they are needed. This is sometimes called progressive transmission. == Example images ==

    Read more →
  • Super column

    Super column

    A super column is a tuple (a pair) with a binary super column name and a value that maps it to many columns. They consist of a key–value pairs, where the values are columns. Theoretically speaking, super columns are (sorted) associative array of columns. Similar to a regular column family where a row is a sorted map of column names and column values, a row in a super column family is a sorted map of super column names that maps to column names and column values. A super column is part of a keyspace together with other super columns and column families, and columns. == Code example == Written in the JSON-like syntax, a super column definition can be like this: Where: "databases" are keyspace; "Cassandra" and "HBase" are rowKeys; "name" and "address" are super column names; "firstName", "city", "age", etc. are column names.

    Read more →
  • Task Force on Process Mining

    Task Force on Process Mining

    The IEEE Task Force on Process Mining (TFPM) is a non-commercial association for process mining. The IEEE (Institute of Electrical and Electronics Engineers) Task Force on Process Mining was established in October 2009 as part of the IEEE Computational Intelligence Society at the Eindhoven University of Technology. The task force is supported by over 80 organizations and has around 750 members. The main goal of the task force is to promote the research, development, education, and understanding of process mining. == About == In 2012, the IEEE World Congress on Computational Intelligence/ IEEE Congress on Evolutionary Computation held a session on Process Mining. Process mining is a type of research that is a mix of computational intelligence and data mining, as well as process modeling and analysis. === Activities and organization === The Task Force on Process Mining has a Steering Committee and an Advisory Board. The Steering Committee, was chaired by Wil van der Aalst in its inception in 2009, defined 15 action lines. These include the organization of the annual International Process Mining Conference (ICPM) series, standardization efforts leading to the IEEE XES standard for storing and exchanging event data, and the Process Mining Manifesto which was translated into 16 languages. The Task Force on Process Mining also publishes a newsletter, provides data sets, organizes workshops and competitions, and connects researchers and practitioners. In 2016, the IEEE Standards Association published the IEEE Standard for Extensible Event Stream (XES), which is a widely accepted file format by the process mining community. As of 2023, Boudewijn van Dongen serves as chair of the Steering Committee. Wil van der Aalst and Moe Wynn both serve as vice-chair of the Steering Committee.

    Read more →
  • Automated journalism

    Automated journalism

    Automated journalism, also known as algorithmic journalism or robot journalism, is a term that attempts to describe modern technological processes that are now in use in the journalistic profession, such as news articles and videos generated by computer programs. There are four main fields of application for automated journalism, namely automated content production, data mining, news dissemination and content optimization. Through generative artificial intelligence, stories are produced automatically by computers rather than human reporters. In the 2020s, generative pre-trained transformers have enabled the generation of articles, simply by providing prompts. Automated journalism is sometimes seen as an opportunity to free journalists from routine reporting, providing them with more time for complex tasks. It also allows efficiency and cost-cutting, alleviating some financial burden that many news organizations face. However, automated journalism is also perceived as a threat to the authorship and quality of news and a threat to the livelihoods of human journalists. == History == Historically, the process involved an algorithm that scanned large amounts of provided data, selected from an assortment of pre-programmed article structures, ordered key points, and inserted details such as names, places, amounts, rankings, statistics, and other figures. These programs interpret, organize, and present data in human-readable ways. The output can also be customized to fit a certain voice, tone, or style. Early implementations were mainly used for stories based on statistics and numerical figures. Common topics include sports recaps, weather, financial reports, real estate analysis, and earnings reviews. Data science and AI companies such as Automated Insights, Narrative Science, United Robots and Monok develop and provide these algorithms to news outlets. In 2016, early adopters included news providers such as the Associated Press, Forbes, ProPublica, and the Los Angeles Times. StatSheet, an online platform covering college basketball, runs entirely on an automated program. In 2006, Thomson Reuters announced their switch to automation to generate financial news stories on its online news platform. Reuters used a tool called Tracer. An algorithm called Quakebot published a story about a 2014 California earthquake on The Los Angeles Times website within three minutes after the shaking had stopped. The Associated Press began using automation to cover 10,000 minor baseball leagues games annually, using a program from Automated Insights and statistics from MLB Advanced Media. Outside of sports, the Associated Press also uses automation to produce stories on corporate earnings. Since 2014, Associated Press has been publishing quarterly financial stories with help from Automated Insights. In May 2020, Microsoft announced that a number of its MSN contract journalists would be replaced by robot journalism. On 8 September 2020, The Guardian published an article entirely written by the neural network GPT-3, although the published fragments were manually picked by a human editor. Agentic Tribune produces all of its news articles automatically using AI. News broadcasters in Kuwait, Greece, South Korea, India, China and Taiwan have presented news with anchors based on generative AI models, prompting concerns about job losses for human anchors and audience trust in news that has historically been influenced by parasocial relationships with broadcasters, content creators or social media influencers. Algorithmically generated anchors have also been used by allies of ISIS for their broadcasts. In 2023, Google reportedly pitched a tool to news outlets that claimed to "produce news stories" based on input data provided, such as "details of current events". Some news company executives who viewed the pitch described it as "[taking] for granted the effort that went into producing accurate and artful news stories." In February 2024, Google launched a program to pay small publishers to write three articles per day using a beta generative AI model. The program does not require the knowledge or consent of the websites that the publishers are using as sources, nor does it require the published articles to be labeled as being created or assisted by these models. Meta AI, a chatbot based on Llama 3 which summarizes news stories, was noted by The Washington Post to copy sentences from those stories without direct attribution and to potentially further decrease the traffic of online news outlets. == Benefits == === Speed === Robot reporters are built to produce large quantities of information at quicker speeds. The Associated Press announced that their use of automation has increased the volume of earnings reports from customers by more than ten times. With software from Automated Insights and data from other companies, they can produce 150 to 300-word articles in the same time it takes journalists to crunch numbers and prepare information. By automating routine stories and tasks, journalists are promised more time for complex jobs such as investigative reporting and in-depth analysis of events. Francesco Marconi of the Associated Press stated that, through automation, the news agency freed up 20 percent of reporters’ time to focus on higher-impact projects. This has also been stated by a spokesperson at Gannett, who stated "By leveraging AI, we are able to expand coverage and enable our journalists to focus on more in-depth reporting." GBH reports that AI tools help increase the reach of news publishers. Mike Carragi, a product manager at Patch, stated that they were able to increase their reach from 1200 communities to 7000 communities in just a few months without the need for new employees solely through the adoption of generative AI. In fact, many communities are served solely by AI generated content, which creates summaries of existing information within the community. === Cost === Automated journalism is cheaper because more content can be produced within less time. It also lowers labour costs for news organizations. Reduced human input means less expenses on wages or salaries, paid leaves, vacations, and employment insurance. Automation serves as a cost-cutting tool for news outlets struggling with tight budgets but still wish to maintain the scope and quality of their coverage. == Concerns == === Authorship === In an automated story, there is often confusion about who should be credited as the author. Several participants of a study on algorithmic authorship attributed the credit to the programmer; others perceived the news organization as the author, emphasizing the collaborative nature of the work. There is also no way for the reader to verify whether an article was written by a robot or human, which raises issues of transparency although such issues also arise with respect to authorship attribution between human authors too. === Credibility and quality === Concerns about the perceived credibility of automated news is similar to concerns about the perceived credibility of news in general. Critics doubt if algorithms are "fair and accurate, free from subjectivity, error, or attempted influence." Again, these issues about fairness, accuracy, subjectivity, error, and attempts at influence or propaganda has also been present in articles written by humans over thousands of years. A common criticism is that machines do not replace human capabilities such as creativity, humour, and critical-thinking. However, as the technology evolves, the aim is to mimic human characteristics. When the UK's Guardian newspaper used an AI to write an entire article in September 2020, commentators pointed out that the AI still relied on human editorial content. Austin Tanney, the head of AI at Kainos said: "The Guardian got three or four different articles and spliced them together. They also gave it the opening paragraph. It doesn’t belittle what it is. It was written by AI, but there was human editorial on that." The largest single study of readers' evaluations of news articles produced with and without the help of automation exposed 3,135 online news consumers to 24 articles. It found articles that had been automated were significantly less comprehensible, in part because they were considered to contain too many numbers. However, the automated articles were evaluated equally on other criteria including tone, narrative flow, and narrative structure. Beyond human evaluation, there are now numerous algorithmic methods to identify machine written articles although some articles may still contain errors that are obvious for a human to identify, they can at times score better with these automatic identifiers than human-written articles. A 2017 Nieman Reports article by Nicola Bruno discusses whether or not machines will replace journalists and addresses concerns around the concept of automated journalism practices. Ultimately, Bruno came to the conclusion that AI would assist journalist

    Read more →
  • Cooperative storage cloud

    Cooperative storage cloud

    A cooperative storage cloud is a decentralized model of networked online storage where data is stored on multiple computers (nodes), hosted by the participants cooperating in the cloud. For the cooperative scheme to be viable, the total storage contributed in aggregate must be at least equal to the amount of storage needed by end users. However, some nodes may contribute less storage and some may contribute more. There may be reward models to compensate the nodes contributing more. Unlike a traditional storage cloud, a cooperative does not directly employ dedicated servers for the actual storage of the data, thereby eliminating the need for a significant dedicated hardware investment. Each node in the cooperative runs specialized software which communicates with a centralized control and orchestration server, thereby allowing the node to both consume and contribute storage space to the cloud. The centralized control and orchestration server requires several orders of magnitude less resources (storage, computing power, and bandwidth) to operate, relative to the overall capacity of the cooperative. == Data security == Files hosted in the cloud are fragmented and encrypted before leaving the local machine. They are then distributed randomly using a load balancing and geo-distribution algorithm to other nodes in the cooperative. Users can add an additional layer of security and reduce storage space by compressing and encrypting files before they are copied to the cloud. == Data redundancy == In order to maintain data integrity and high availability across a relatively unreliable set of computers over a wide area network like the Internet, the source node will add some level of redundancy to each data block. This allows the system to recreate the entire block even if some nodes are temporarily unavailable (due to loss of network connectivity, the machine being powered off or a hardware failure). The most storage and bandwidth efficient forms of redundancy use erasure coding techniques like Reed–Solomon. A simple, less CPU intensive but more expensive form of redundancy is duplicate copies. == Flexible contribution == Due to bandwidth or hardware constraints some nodes may not be able to contribute as much space as they consume in the cloud. On the other hand, nodes with large storage space and limited or no bandwidth constraints may contribute more than they consume, thereby the cooperative can stay in balance.

    Read more →
  • Nike+iPod

    Nike+iPod

    The Nike+iPod Sport Kit is an activity tracker device, developed by Nike, Inc., which measures and records the distance and pace of a walk or run. The Nike+iPod consists of a small transmitter device attached to or embedded in a shoe, which communicates with either the Nike+ Sportband, or a receiver plugged into an iPod Nano. It can also work directly with a 2nd Generation iPod Touch (or higher), iPhone 3GS, iPhone 4, iPhone 4S, iPhone 5, The Nike+iPod was announced on May 23, 2006. On September 7, 2010, Nike released the Nike+ Running App (originally called Nike+ GPS) on the App Store, which used a tracking engine powered by MotionX that does not require the separate shoe sensor or pedometer. This application works using the accelerometer and GPS of the iPhone and the accelerometer of the iPod Touch, which does not have a GPS chip. Nike+Running is compatible with the iPhone 6 and iPhone 6 Plus down to iPhone 3GS and iPod touch. On June 21, 2012, Nike released Nike+ Running App for Android. The current app is compatible with all Android phones running 4.0.3 and up. == Overview == The sensor and iPod kit were revealed on May 20, 2006. The kit stores information such as the elapsed time of the workout, the distance traveled, pace, and calories burned by the individual. Nike+ was a collaboration between Nike and Apple; the platform consisted of an iPod, a wireless chip, Nike shoes that accepted the wireless chip, an iTunes membership, and a Nike+ online community. iPods using Nike iPod require a sensor and remote. The next upgraded product was the Sportband kit, which was announced in April 2008. The kit allows users to store run information without the iPod Nano. The Sportband consists of two parts: a rubber holding strap which is worn around the wrist, and a receiver which resembles a USB key-disk. The receiver displays information comparable to that of the iPod kit on the built-in display. After a run, the receiver can be plugged straight into a USB port and the software will upload the run information automatically to the Nike+ website. As of August 2008 "Nike+iPod for the Gym" launched, allowing users to record their cardio workouts directly to their iPods. No Sport kit or shoe sensor is required; all that is needed is a compatible iPod (1st–6th generation iPod Nano or 2nd/3rd gen iPod Touch) and an enabled piece of cardio equipment. As of March 2009, the seven largest commercial equipment providers were shipping enabled equipment (Life Fitness, Technogym, Precor USA, Star Trac, Cybex International, Matrix Fitness and Free Motion). The models of compatible cardio equipment include treadmills, stationary bicycles, stair climbers, ellipticals, and others such as Precor's Adaptive Motion Trainer. Once the user syncs an iPod with iTunes, the cardio workouts are automatically stored at Nikeplus.com, where each workout is visualized and tracked based on the number of calories burned. The calories are converted to "CardioMiles", at a ratio of 100:1, allowing cardio users to take full advantage of all the tools and features of Nikeplus.com, and allow them to engage in challenges with other runners, walkers and cardio users, using a common currency. With the release of the second-generation iPod Touch in 2008, Apple Inc. included a built-in ability to receive Nike+ signals, which allowed the iPod to connect directly to the wireless sensor thus eliminating the need for an external receiver to be connected. Apple also added this capability to the iPhone 3GS (released 2009), iPhone 4 (2010), and third-generation iPod Touch (2009). Those devices use their Broadcom Bluetooth chipset to receive the signals. On June 7, 2010, Polar and Nike introduced the Polar WearLink+ that works with Nike+. This new product works with the Nike+ SportBand and the fifth generation iPod nano in conjunction with the Nike+ iPod Sport Kit. Polar WearLink+ that works with Nike+ communicates directly with the fifth generation iPod nano and Nike+ SportBand using a proprietary digital protocol but it is dual-mode so it is also compatible with most Polar training computers (all those using 5 kHz analog transmission technology). Nike+ had 18 million global users as of April 2013. One year later, Nike updated the number of global users to 28 million. In iOS 6.1.2 (and possibly higher), a hole in the compatibility for the app has allowed jailbroken iPad users to use the native Nike + iPod iPhone and iPod app by moving the app bundle and setting permissions for the app. On April 30, 2018, Nike retired services for legacy Nike wearable devices, such as the Nike+ FuelBand and the Nike+ SportWatch GPS, and previous versions of apps, including Nike Run Club and Nike Training Club version 4.X and lower. Likewise, Nike no longer supported the Nike+ Connect software that transferred data to a NikePlus Profile or the Nike+ Fuel/FuelBand and Nike+ Move apps. == Sports kit equipment == The kit consists of two pieces: a piezoelectric sensor with a Nordic Semiconductor nRF2402 transmitter that is mounted under the inner sole of the shoe and a receiver that connects to the iPod. They communicate using a 2.4 GHz wireless radio and use Nordic Semiconductor's "ShockBurst" network protocol. The wireless data is encrypted in transit, but some uniquely identifying data is sent in the plain. The wireless protocol was reverse engineered and documented by Dmitry Grinberg in 2011. Nike recommends that the shoe be a Nike+ model with a special pocket in which to place the device. Nike has released the sensor for individual sale meaning that consumers no longer have to purchase the whole set (the iPod receiver and sensor). As the sensor battery cannot be replaced, a new one must be purchased every time the battery runs out. Aftermarket solutions are available to users who do not want to use shoes with built-in or hand-made pockets for the foot sensor, such as shoe pouches and containment devices designed to affix the sensor against the shoe laces. No matter how the sensor is integrated with the user's shoes, care must be taken that it is firmly fixed in place and will not jerk around while in use, which would degrade the accuracy. == Sports kit usage == The Sports Kit can be used to track running, which it refers to as "workouts". New workouts are started by plugging the receiving unit into the iPod, then navigating through the iPod menu system. The user chooses a goal for the workout, which might be to cover a specific distance, or burn a number of calories, or work out for a specified time. A workout can also be started without a goal, which is called a "Basic Workout". When the workout goal has been set, the receiver seeks the sensor, possibly asking the user to "walk around to activate [the] sensor". The user then must press the center button on the iPod to begin the workout. Audio feedback is provided in the user's choice of generic male or female voice by the iPod over the course of the workout, depending on the type of workout chosen. For goal-oriented workouts, the feedback will correspond to significant milestones toward the goal. In a distance workout, for example, the audio feedback will inform the user as each mile or kilometer has been completed, as well as the half-way point of the workout, and a countdown of four 100-meter increments at the end of the workout. The iPod's control wheel functions change slightly during a workout. The Pause button now not only pauses the music but also the workout. Similarly, the Menu button is used to access the controls to end the workout. The Forward and Back buttons are unchanged, performing audio track skip and reverse functions. The Center button has two functions: audio feedback about the current distance, time, and pace are provided when the button is tapped once, while if the button is held down the iPod skips to the "PowerSong" - an audio track chosen by the user, generally intended for motivation. In addition to the in-workout audio feedback, there are pre-recorded congratulations provided by Lance Armstrong, Tiger Woods, Joan Benoit Samuelson, and Paula Radcliffe whenever a user achieves a personal best (such as fastest mile, fastest 5K, fastest 10K, longest run yet) or reaches certain long-term milestones (such as 250 miles, 500 kilometers). This "celebrity feedback" is heard after the usual end-of-run statistics. While the Sports Kit can be used immediately after purchase, it will report more accurate results if it is calibrated before the first usage and then regularly afterwards. For calibration, the user finds a fixed known distance of at least 0.25 mile or 400 meters and then sets the Nike+ to calibration mode for the walk or run over that distance. When the walk or run is complete, the device calibrates itself and future workout reporting will reflect statistics closer to that individual user's workout style. Consumer Reports magazine tested the device and found it accurate as long as you keep an even pace. In workouts with varied pa

    Read more →
  • Sikidy

    Sikidy

    Sikidy is a form of algebraic geomancy practiced by Malagasy peoples in Madagascar. It involves algorithmic operations performed on random data generated from tree seeds, which are ritually arranged in a tableau called a toetry and divinely interpreted after being mathematically operated on. Columns of seeds, designated "slaves" or "princes" belonging to respective "lands" for each, interact symbolically to express vintana ('fate') in the interpretation of the diviner. The diviner also prescribes solutions to problems and ways to avoid fated misfortune, often involving a sacrifice. The centuries-old practice derives from Islamic influence brought to the island by medieval Arab traders. The sikidy is consulted for a range of divinatory questions pertaining to fate and the future, including identifying sources of and rectifying misfortune, reading the fate of newborns, and planning annual migrations. The mathematics of sikidy involves Boolean algebra, symbolic logic and parity. == History == The practice is several centuries old, and is influenced by Arab geomantic traditions of Arab Muslim traders on the island. Most writers link the origins of sikidy to the "sea-going trade involving the southwest coast of India, the Persian Gulf, and the east coast of Africa in the 9th or 10th century C.E." Stephen Ellis and Solofo Randrianja describe sikidy as "probably one of the oldest components of Malagasy culture", writing that it most likely the product of an indigenous divinatory art later influenced by Islamic practice. Umar H. D. Danfulani writes that the integration of Arabic divination into indigenous divination is "clearly demonstrated" in Madagascar, where the Arabic astrological system was adapted to the indigenous agricultural system and meshed with Malagasy lunar months by "adapting indigenous months, volana, to the astrological months, vintana". Danfulani also describes the concepts in sikidy of "houses" (lands) and "kings in their houses" as retained from medieval Arabic astrology. Chemillier et al. say the practice's spread across Madagascar likely originated with the southeastern Antemoro people, among whom Arab influence was the strongest. Though the etymology of sikidy is unknown, it has been posited that the word derives from the Arabic sichr ('incantation' or 'charm'). Sikidy was of central importance to pre-Christian Malagasy religion, with one practitioner quoted in 1892 as calling sikidy "the Bible of our ancestors". A missionary report from 1616 describes one form of sikidy using tamarind seeds, and another using fingered markings in the sand. The early colonial French governor of Madagascar Étienne de Flacourt documented sikidy in the mid-17th century: Matatane country in southeastern Madagascar [...] where the Antemoro [...] live was a center of astrological study as early as the fourteenth century [...]. This area was also the site of early Arab settlements, although strict Islamic observances were lost centuries ago [...]. Historical evidence shows that Antemoro diviners, bearers of the astrological system, infiltrated nearly all the ancient kingdoms of Madagascar beginning in the sixteenth century. [...] Today, although many persons claim to be ombiasy [diviners], only the Antemoro diviners are considered true professionals. The area is still a famous place of learning where specialists go for training and then return to their home communities with a certain body of knowledge. Now we can better understand the degree of similarity of divination forms found throughout Madagascar. For centuries Matitanana has remained a training center for diviners who have migrated widely, usually attaining important positions in their home communities and with various royal families. Comparison of contemporary rites with centuries-old texts show that sikidy has been remarkably unchanged throughout its history. The "infiltration" of Malagasy kingdoms by Antemoro diviners, and Matitanana's role as a place for astrological and divinatory learning, help to explain the relatively uniform practicing of sikidy across Madagascar. Chemallier et al. write that the mathematical construction of the arrangement of seeds is procedurally consistent across all of Madagascar, with variations in practice between groups and regions being limited to more minor aspects, such as the alignment of figures according to cardinal directions. One exception is the simplified Merina sikidy joria. === Origin myths === Mythic tradition relating to the origin of sikidy "links [the practice] both to the return by walking on water of Arab ancestors who had intermarried with Malagasy but then left, and to the names of the days of the week" and holds that the art was supernaturally communicated to the ancestors, with Zanahary (the supreme deity of Malagasy religion) giving it to Ranakandriana, who then gave it to a line of diviners (Ranakandriana to Ramanitralanana to Rabibi-andrano to Andriambavi-maitso (who was a woman) to Andriam-bavi-nosy), the last of whom terminated the monopoly by giving it to the people, declaring: "Behold, I give you the sikidy, of which you may inquire what offerings you should present in order to obtain blessings; and what expiation you should make so as to avert evils, when any are ill or under apprehension of some future calamity". A mythic anecdote of Ranakandriana says that two men observed him one day playing in the sand. In fact he was practicing a form of sikidy worked in sand called sikidy alanana. The two men seized him, and Ranakandriana promised that he would teach them something if they released him. They agreed, and Ranakandriana taught them in depth how to work the sikidy. The two men then went to their chief and told him that they could tell him "the past and the future—what was good and what was bad—what increased and what diminished." The chief asked them to tell him how he could obtain plenty of cattle. The two men worked their sikidy and told the chief to kill all of his bulls, and that "great numbers would come to him" on the following Friday. The chieftain, doubting, asked what would happen if their prediction didn't come true, and the two men promised they would pay with their lives. The chief agreed and killed his bulls. On Thursday, thinking he'd been duped, he prematurely killed the first man of the two who'd told him about the divinatory art. On Friday, however, "vast herds" came amidst heavy rain, actually filling an immense plain in their crowd. The chieftain lamented the mpisikidy's wrongful execution and ordered for him a pompous funeral. The chieftain took the second man as his close adviser and friend, and trusted the sikidy forever afterwards. The British missionary William Ellis recorded in 1839 two idiomatic expressions used in Madagascar that come from this story: "Tsy mahandry andro Zoma" (lit. 'He cannot wait 'til Friday') is said of someone extremely impatient, and heavy rainshowers falling in rapid succession are called "sese omby" (lit. 'a crowding together of cattle'). == Rites and arrangement of seeds == The divination is performed by a practitioner called an mpisikidy, ny màsina (lit. 'sacred one'), ombiasy, or ambiàsa (derived from the Arabic anbia, meaning 'prophet') who guides the client through the process and interprets the results in the context of the client's inquiries and desires. As part of an mpisikidy's formal initiation into the art, which includes a long period of apprenticeship, the initiate (called a mianatsy) must gather 124 and 200 fàno (Entada sp.) or kily (tamarind) tree seeds for his subsequent ritual use in sikidy. Raymond Decary writes that, at least among the Sakalava, a man must be 40 years old before learning and practicing sikidy, or he risks death. Before beginning to study, a student practitioner must make incisions at the tips of his index finger, his middle finger, and his tongue, and put within the incisions a paste containing red pepper and crushed wasp. This paste impregnates the fingers that will move the seeds of the sikidy and the tongue that will speak their revelations with the power to decipher the sikidy. Once this is done, he leaves at dawn to search for a fano (Entada chrysostachys) tree. Upon finding it, he throws his spear at its branches, shaking the tree and causing its large seed pods to fall. During this act, some initiates say: "When you were on the steep peak and in the dense forest, on you the crabs climbed, from you the crocodiles made their bed, with their paws the birds trod on you. Whether you are suspended in the trees or buried, you are never dried up nor rotten." In his study (written in 1941 and revised in 1948), Decary reported that the salary paid by a mianatsy to his master is "not very high": up to five francs, plus a red rooster's feather. The mpisikidy ritually arranges his seeds into a sixteen-column table consisting of four columns of randomly-generated data (representing fate) and eight columns of data derived from logical ope

    Read more →