AI Assistant Roblox

AI Assistant Roblox — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Content Disarm and Reconstruction

    Content Disarm and Reconstruction

    Content Disarm and Reconstruction (CDR) is a computer security technology for removing potentially malicious code from files. Unlike malware analysis, CDR technology does not determine or detect malware's functionality but removes all file components that are not approved within the system's definitions and policies. It is used to prevent cyber security threats from entering a corporate network perimeter. Channels that CDR can be used to protect include email and website traffic. Advanced solutions can also provide similar protection on computer endpoints, or cloud email and file sharing services. There are three levels of CDR; 1) flattening and converting the original file to a PDF, 2) stripping active content while keeping the original file type, and 3) eliminating all file-borne risk while maintaining file type, integrity and active content. Beyond these three levels, there are also more advanced forms of CDR that is able to perform "soft conversion" and "hard conversion", based on the user's preference in balancing usability and security. == Applications == CDR works by processing all incoming files of an enterprise network, deconstructing them, and removing the elements that do not match the file type's standards or set policies. CDR technology then rebuilds the files into clean versions that can be sent on to end users as intended. Because CDR removes all potentially malicious code, it can be effective against zero-day vulnerabilities that rely on being an unknown threat that other security technologies would need to patch against to maintain protection. CDR can be used to prevent cyber threats from variety of sources: Email Data Diodes Web Browsers Endpoints File Servers FTP Cloud email or webmail programs SMB/CIFS Removable media scanning (CDR Kiosk) CDR can be applied to a variety of file formats including: Images Office documents PDF Audio/video file formats Archives HTML == Open source implementations == DocBleach ExeFilter

    Read more →
  • Multistage interconnection networks

    Multistage interconnection networks

    Multistage interconnection networks (MINs) are a class of high-speed computer networks usually composed of processing elements (PEs) on one end of the network and memory elements (MEs) on the other end, connected by switching elements (SEs). The switching elements themselves are usually connected to each other in stages, hence the name. MINs are typically used in high-performance or parallel computing as a low-latency interconnection (as opposed to traditional packet switching networks), though they could be implemented on top of a packet switching network. Though the network is typically used for routing purposes, it could also be used as a co-processor to the actual processors for such uses as sorting; cyclic shifting, as in a perfect shuffle network; and bitonic sorting. == Background == Interconnection network are used to connect nodes, where nodes can be a single processor or group of processors, to other nodes. Interconnection networks can be categorized on the basis of their topology. Topology is the pattern in which one node is connected to other nodes. There are two main types of topology: static and dynamic. Static interconnect networks are hard-wired and cannot change their configurations. A regular static interconnect is mainly used in small networks made up of loosely couple nodes. The regular structure signifies that the nodes are arranged in specific shape and the shape is maintained throughout the networks. Some examples of static regular interconnections are: Completely connected network In a mesh network, multiple nodes are connected with each other. Each node in the network is connected to every other node in the network. This arrangement allows proper communication of the data between the nodes. But, there are a lot of communication overheads due to the increased number of node connections. Shared busThis network topology involves connection of the nodes with each other over a bus. Every node communicates with every other node using the bus. The bus utility ensures that no data is sent to the wrong node. But, the bus traffic is an important parameter which can affect the system. RingThis is one of the simplest ways of connecting nodes with each other. The nodes are connected with each other to form a ring. For a node to communicate with some other node, it has to send the messages to its neighbor. Therefore, the data message passes through a series of other nodes before reaching the destination. This involves increased latency in the system. TreeThis topology involves connection of the nodes to form a tree. The nodes are connected to form clusters and the clusters are in-turn connected to form the tree. This methodology causes increased complexity in the network. Hypercube This topology consists of connections of the nodes to form cubes. The nodes are also connected to the nodes on the other cubes. ButterflyThis is one of the most complex connections of the nodes. As the figure suggests, there are nodes which are connected and arranged in terms of their ranks. They are arranged in the form of a matrix. In dynamic interconnect networks, the nodes are interconnected via an array of simple switching elements. This interconnection can then be changed by use of routing algorithms, such that the path from one node to other nodes can be varied. Dynamic interconnections can be classified as: Single stage Interconnect Network Multistage interconnect Network Crossbar switch connections == Crossbar Switch Connections == In crossbar switch, there is a dedicated path from one processor to other processors. Thus, if there are n inputs and m outputs, we will need nm switches to realize a crossbar. As the number of outputs increases, the number of switches increases by factor of n. For large network this will be a problem. An alternative to this scheme is staged switching. == Single Stage Interconnect Network == In a single stage interconnect network, the input nodes are connected to output via a single stage of switches. The figure shows 88 single stage switch using shuffle exchange. As one can see, from a single shuffle, not all input can reach all output. Multiple shuffles are required for all inputs to be connected to all the outputs. == Multistage Interconnect Network == A multistage interconnect network is formed by cascading multiple single stage switches. The switches can then use their own routing algorithm, or be controlled by a centralized router, to form a completely interconnected network. Multistage Interconnect Network can be classified into three types: Non-blocking: A non-blocking network can connect any idle input to any idle output, regardless of the connections already established across the network. Crossbar is an example of this type of network. Rearrangeable non-blocking: This type of network can establish all possible connections between inputs and outputs by rearranging its existing connections. Blocking: This type of network cannot realize all possible connections between inputs and outputs. This is because a connection between one free input to another free output is blocked by an existing connection in the network. The number of switching elements required to realize a non-blocking network in highest, followed by rearrangeable non-blocking. Blocking network uses least switching elements. == Examples == Multiple types of multistage interconnection networks exist. === Omega network === An Omega network consists of multiple stages of 22 switching elements. Each input has a dedicated connection to an output. An NN omega network has log2(N) stages and N/2 switching elements in each stage for a perfect shuffle between stages. Thus the network has complexity of 0(N log(N)). Each switching element can employ its own switching algorithm. Consider an 88 omega network. There are 8! = 40320 1-to-1 mappings from input to output. There are 12 switching element for a total permutation of 2^12 = 4096. Thus, it is a blocking network. === Clos network === A Clos network uses 3 stages to switch from N inputs to N outputs. In the first stage, there are r= N/n crossbar switches and each switch is of size nm. In the second stage there are m switches of size rr and finally the last stage is a mirror of the first stage with r switches of size mn. A clos network will be completely non-blocking if m >= 2n-1. The number of connections, though more than omega network is much less than that of a crossbar network. === Beneš network === A Beneš network is a rearrangeably non-blocking network derived from the clos network by initializing n = m = 2. There are (2log2(N) - 1) stages, with each stage containing N/2 22 crossbar switches. An 88 Beneš network has 5 stages of switching elements, and each stage has 4 switching elements. The center three stages has two 44 benes network. The 44 Beneš network, can connect any input to any output recursively.

    Read more →
  • NYSERNet

    NYSERNet

    NYSERNet, Inc. (New York State Education and Research Network), is a non-profit Internet service provider in New York State. It mainly provides Internet access to universities, colleges, museums, health care facilities, primary and secondary schools, and research institutions. == History == NYSERNet was founded in 1986 in Troy, New York. Its founders compared NYSERNet's network with the Erie Canal and considered it the next step in two centuries to draw the country together. NYSERNet's network reaches from Buffalo to New York City. Completed in 1987, it was the first statewide regional IP network in the United States.[1] Initial speed of 56 kbps was upgraded to T1 in 1989 and T3 in 1994. It was the original assignee of AS174 according to RFC1117. This ASN is used today by Cogent Communications for their global network.

    Read more →
  • Group key

    Group key

    In cryptography, a group key is a cryptographic key that is shared between a group of users. Typically, group keys are distributed by sending them to individual users, either physically, or encrypted individually for each user using either that user's pre-distributed private key. A common use of group keys is to allow a group of users to decrypt a broadcast message that is intended for that entire group of users, and no one else. For example, in the Second World War, group keys (known as "iodoforms", a term invented by a classically educated non-chemist, and nothing to do with the chemical of the same name) were sent to groups of agents by the Special Operations Executive. These group keys allowed all the agents in a particular group to receive a single coded message. In present-day applications, group keys are commonly used in conditional access systems, where the key is the common key used to decrypt the broadcast signal, and the group in question is the group of all paying subscribers. In this case, the group key is typically distributed to the subscribers' receivers using a combination of a physically distributed secure cryptoprocessor in the form of a smartcard and encrypted over-the-air messages.

    Read more →
  • Scripped

    Scripped

    Scripped was an online screenplay services company offering three services: script writing, script registration, and script coverage. Scripped did not facilitate collaboration among screenwriters. It combined with Zhura in 2010. According to Techcrunch, Scripped had more than 60,000 writers as of March 2010. Scripped was administered by Sunil Rajaraman, Ryan Buckley and Zak Freer. Actor, writer, and director Edward Burns and screenwriter Steven E. de Souza joined Scripped's Board of Advisers in May 2008. In 2008, the company formed a partnership with Write Brothers, makers of Movie Magic Screenwriter software. On March 29, 2010, Scripped announced that it closed $250,000 in private investment and merged with competitor Zhura. Scripped's CEO, Sunil Rajaraman, remains the merged company's Chief Executive Officer. On April 1, 2015, citing a serious technical failure, Scripped shuttered its service. As part of the announcement, it was disclosed that their backup servers had failed as well, losing all of its users' stored scripts. The website URL currently redirects to WriterDuet's website, another online scriptwriting service; Scripped had advertised WriterDuet in Scripped's shutdown open letter. == Features == The Scripped Writer provided a built-in screenplay template which formatted the document to a standard for scripts as recommended by the AMPAS. The screenplay document was composed of seven elements: scene, action, character, dialog, parenthetical, transition and general. Each element had a specific style to which the Scripped Writer conformed as text was entered. Like other client-side screenplay software, Scripped offered Tab-Enter toggling between screenplay elements, making the writing process much faster. Text files could be imported into the Scripped Writer and automatically conformed to the screenplay template. Completed scripts could be exported as PDF files. In May 2011 the administrators of Scripped launched Scripted.com - a sister site focused on freelance writing jobs. Subsequent to the service's launch, the company was renamed to Scripted, Inc.

    Read more →
  • Information security

    Information security

    Information security is the practice of protecting information by mitigating information risks. It is part of information risk management. It typically involves preventing or reducing the probability of unauthorized or inappropriate access to data or the unlawful use, disclosure, disruption, deletion, corruption, modification, inspection, recording, or devaluation of information. It also involves actions intended to reduce the adverse impacts of such incidents. Protected information may take any form, e.g., electronic or physical, tangible (e.g., paperwork), or intangible (e.g., knowledge). Information security's primary focus is the balanced protection of data confidentiality, integrity, and availability (known as the CIA triad, unrelated to the US government organization) while maintaining a focus on efficient policy implementation, all without hampering organization productivity. This is largely achieved through a structured risk management process. To standardize this discipline, academics and professionals collaborate to offer guidance, policies, and industry standards on passwords, antivirus software, firewalls, encryption software, legal liability, security awareness and training, and so forth. This standardization may be further driven by a wide variety of laws and regulations that affect how data is accessed, processed, stored, transferred, and destroyed. While paper-based business operations are still prevalent, requiring their own set of information security practices, enterprise digital initiatives are increasingly being emphasized, with information assurance now typically being dealt with by information technology (IT) security specialists. These specialists apply information security to technology (most often some form of computer system). IT security specialists are almost always found in any major enterprise/establishment due to the nature and value of the data within larger businesses. They are responsible for keeping all of the technology within the company secure from malicious attacks that often attempt to acquire critical private information or gain control of the internal systems. There are many specialist roles in Information Security including securing networks and allied infrastructure, securing applications and databases, security testing, information systems auditing, business continuity planning, electronic record discovery, and digital forensics. == Standards == Information security standards are guidelines generally outlined in published materials that aim to protect a user's or an organization's cyber environment from threats. This environment includes the users themselves, hardware such as devices and networks, software such as applications or services, and any information in storage or transit. These standards comprise security concepts, technologies, and guidelines to deal with an adverse event. They may also include assessment criteria and certification for organizations implementing a minimum level of security. These standards are developed by various international and national bodies to prevent or mitigate cyber-attacks, ensure consistency among developers, and establish a minimum standard in industries susceptible to an attack. The ISO/IEC 27000 family, published by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), provides information about the guidelines and requirements for an Information Security Management System (ISMS). The Common Criteria (ISO/IEC 15408) provides guidelines on evaluating and certifying the security of a system. The IEC 62443 establishes security standards for automation and control systems. Similarly, the ISO/SAE 21434, ETSI EN 303 645, and EN 18031 provide standards for road vehicles, the Internet of Things, and radio-based systems respectively. The NIST Cybersecurity Framework (NIST CSF) is a set of guidelines developed by the U.S. National Institute of Standards and Technology to help organizations with risk management. NIST also publishes various Federal Information Processing Standards (FIPS) and Special Publications. The United Kingdom has introduced Cyber Essentials, which is a certification scheme to protect organizations against common security threats. The Australian Cyber Security Centre publishes the Essential Eight mitigation strategies. The Payment Card Industry Data Security Standard (PCI DSS) regulates handling of cardholder data in order to reduce credit card fraud. UL has published standards related to specific industries such as UL 2900-2-3 for security and life safety signaling systems and UL-2900-2-1 for healthcare and wellness systems. == Threats == Information security threats come in many different forms. Some of the most common threats today are software attacks, theft of intellectual property, theft of identity, theft of equipment or information, sabotage, and information extortion. Viruses, worms, phishing attacks, and Trojan horses are a few common examples of software attacks. The theft of intellectual property has also been an extensive issue for many businesses. Identity theft is the attempt to act as someone else usually to obtain that person's personal information or to take advantage of their access to vital information through social engineering. Sabotage usually consists of the destruction of an organization's website in an attempt to cause loss of confidence on the part of its customers. Information extortion consists of theft of a company's property or information as an attempt to receive a payment in exchange for returning the information or property back to its owner, as with ransomware. One of the most functional precautions against these attacks is to conduct periodical user awareness. Governments, military, corporations, financial institutions, hospitals, non-profit organizations, and private businesses amass a great deal of confidential information about their employees, customers, products, research, and financial status. Should confidential information about a business's customers or finances or new product line fall into the hands of a competitor or hacker, a business and its customers could suffer widespread, irreparable financial loss, as well as damage to the company's reputation. From a business perspective, information security must be balanced against cost; the Gordon-Loeb Model provides a mathematical economic approach for addressing this concern. For the individual, information security has a significant effect on privacy, which is viewed very differently in various cultures. == History == Since the early days of communication, diplomats and military commanders understood that it was necessary to provide some mechanism to protect the confidentiality of correspondence and to have some means of detecting tampering. Julius Caesar is credited with the invention of the Caesar cipher c. 50 B.C., which was created in order to prevent his secret messages from being read should a message fall into the wrong hands. However, for the most part protection was achieved through the application of procedural handling controls. Sensitive information was marked up to indicate that it should be protected and transported by trusted persons, guarded and stored in a secure environment or strong box. As postal services expanded, governments created official organizations to intercept, decipher, read, and reseal letters (e.g., the U.K.'s Secret Office, founded in 1653). In the mid-nineteenth century more complex classification systems were developed to allow governments to manage their information according to the degree of sensitivity. For example, the British Government codified this, to some extent, with the publication of the Official Secrets Act in 1889. Section 1 of the law concerned espionage and unlawful disclosures of information, while Section 2 dealt with breaches of official trust. A public interest defense was soon added to defend disclosures in the interest of the state. A similar law was passed in India in 1889, The Indian Official Secrets Act, which was associated with the British colonial era and used to crack down on newspapers that opposed the Raj's policies. A newer version was passed in 1923 that extended to all matters of confidential or secret information for governance. By the time of the First World War, multi-tier classification systems were used to communicate information to and from various fronts, which encouraged greater use of code making and breaking sections in diplomatic and military headquarters. Encoding became more sophisticated between the wars as machines were employed to scramble and unscramble information. The establishment of computer security inaugurated the history of information security. The need for such appeared during World War II. The volume of information shared by the Allied countries during the Second World War necessitated formal alignment of classification systems and procedural controls. An arcane range of markings evol

    Read more →
  • Transmission security

    Transmission security

    Transmission security (TRANSEC) is the component of communications security (COMSEC) that results from the application of measures designed to protect transmissions from interception and exploitation by means other than cryptanalysis. Goals of transmission security include: Low probability of interception (LPI) Low probability of detection (LPD) Antijam — resistance to jamming (EPM or ECCM) This involves securing communication links from being compromised by techniques like jamming, eavesdropping, and signal interception. TRANSEC includes the use of frequency hopping, spread spectrum and the physical protection of communication links to obscure the patterns of transmission. It is particularly vital in military and government communication systems, where the security of transmitted data is critical to prevent adversaries from gathering intelligence or disrupting operations. TRANSEC is often implemented alongside COMSEC (Communications Security) to form a comprehensive approach to communication security. Methods used to achieve transmission security include frequency hopping and spread spectrum where the required pseudorandom sequence generation is controlled by a cryptographic algorithm and key. Such keys are known as transmission security keys (TSK). Modern U.S. and NATO TRANSEC-equipped radios include SINCGARS and HAVE QUICK.

    Read more →
  • Cryptographic High Value Product

    Cryptographic High Value Product

    Cryptographic High Value Product (CHVP) is a designation used within the information security community to identify assets that have high value, and which may be used to encrypt / decrypt secure communications, but which do not retain or store any classified information. When disconnected from the secure communication network, the CHVP equipment may be handled with a lower level of controls than required for COMSEC equipment.

    Read more →
  • System context diagram

    System context diagram

    A system context diagram in engineering is a diagram that defines the boundary between the system, or part of a system, and its environment, showing the entities that interact with it. This diagram is a high level view of a system. It is similar to a block diagram. == Overview == System context diagrams show a system, as a whole and its inputs and outputs from/to external factors. According to Kossiakoff and Sweet (2011): System Context Diagrams ... represent all external entities that may interact with a system ... Such a diagram pictures the system at the center, with no details of its interior structure, surrounded by all its interacting systems, environments and activities. The objective of the system context diagram is to focus attention on external factors and events that should be considered in developing a complete set of systems requirements and constraints. System context diagrams are used early in a project to get agreement on the scope under investigation. Context diagrams are typically included in a requirements document. These diagrams must be read by all project stakeholders and thus should be written in plain language, so the stakeholders can understand items within the document. == Building blocks == Context diagrams can be developed with the use of two types of building blocks: Entities (Actors): labeled boxes; one in the center representing the system, and around it multiple boxes for each external actor Relationships: labeled lines between the entities and system For example, "customer places order." Context diagrams can also use many different drawing types to represent external entities. They can use ovals, stick figures, pictures, clip art or any other representation to convey meaning. Decision trees and data storage are represented in system flow diagrams. A context diagram can also list the classifications of the external entities as one of a set of simple categories (Examples:), which add clarity to the level of involvement of the entity with regards to the system. These categories include: Active: Dynamic to achieve some goal or purpose (Examples: "Article readers" or "customers"). Passive: Static external entities which infrequently interact with the system (Examples: "Article editors" or "database administrator"). Cooperative: Predictable external entities which are used by the system to bring about some desired outcome (Examples: "Internet service providers" or "shipping companies"). Autonomous (Independent): External entities which are separated from the system, but affect the system indirectly, by means of imposed constraints or similar influences (Examples: "regulatory committees" or "standards groups"). == Alternatives == The best system context diagrams are used to display how a system interoperates at a very high level, or how systems operate and interact logically. The system context diagram is a necessary tool in developing a baseline interaction between systems and actors; actors and a system or systems and systems. Alternatives to the system context diagram are: Architecture Interconnect Diagram: The figure gives an example of an Architecture Interconnect Diagram: A representation of the Albuquerque regional ITS architecture interconnects for the Albuquerque Police Department that was generated using the Turbo Architecture tool is shown in the figure. Each block represents an ITS inventory element, including the name of the stakeholder in the top shaded portion. The interconnect lines between elements are solid or dashed, indicating existing or planned connections. Business Model Canvas, a strategic management template for developing new or documenting existing business models. It is a visual chart with elements describing a firm's value proposition, infrastructure, customers, and finances.[1] It assists firms in aligning their activities by illustrating potential trade-offs. Enterprise data model: this type of data model according to Simsion (2005) can contain up to 50 to 200 entity classes, which results from specific "high level of generalization in data modeling". IDEF0 Top Level Context Diagram: The IDEF0 process starts with the identification of the prime function to be decomposed. This function is identified on a "Top Level Context Diagram" that defines the scope of the particular IDEF0 analysis. Problem Diagrams (Problem Frames): In addition to the kinds of things shown on a context diagram, a problem diagram shows requirements and requirements references. Use case diagram: One of the Unified Modeling Language diagrams. They also represent the scope of the project at a similar level of abstraction. - Use Cases, however, tend to focus more on the goals of 'actors' who interact with the system, and do not specify any solution. Use Case diagrams represent a set of Use Cases, which are textual descriptions of how an actor achieves the goal of a use case. for Example Customer Places Order. ArchiMate: ArchiMate is an open and independent enterprise architecture modeling language to support the description, analysis and visualization of architecture within and across business domains in an unambiguous way. Most of these diagrams work well as long as a limited number of interconnects will be shown. Where twenty or more interconnects must be displayed, the diagrams become quite complex and can be difficult to read.

    Read more →
  • Link encryption

    Link encryption

    Link encryption is an approach to communications security that encrypts and decrypts all network traffic at each network routing point (e.g. network switch, or node through which it passes) until arrival at its final destination. This repeated decryption and encryption is necessary to allow the routing information contained in each transmission to be read and employed further to direct the transmission toward its destination, before which it is re-encrypted. This contrasts with end-to-end encryption where internal information, but not the header/routing information, is encrypted by the sender at the point of origin and only decrypted by the intended recipient. Link encryption offers two main advantages: encryption is automatic so there is less opportunity for human error. if the communications link operates continuously and carries an unvarying level of traffic, link encryption defeats traffic analysis. On the other hand, end-to-end encryption ensures only the intended recipient has access to the plaintext. Link encryption can be used with end-to-end systems by superencrypting the messages. Bulk encryption refers to encrypting a large number of circuits at once, after they have been multiplexed.

    Read more →
  • G.9972

    G.9972

    G.9972 (also known as G.cx) is a Recommendation developed by ITU-T that specifies a coexistence mechanism for networking transceivers capable of operating over electrical power line wiring. It allows G.hn devices to coexist with other devices implementing G.9972 and operating on the same power line wiring. G.9972 received consent during the meeting of ITU-T Study Group 15, on October 9, 2009, and final approval on June 11, 2010. G.9972 specifies two mechanisms for coexistence between G.hn home networks and broadband over power lines (BPL) Internet access networks: Frequency-division multiplexing (FDM), in which the available spectrum is divided into two parts: frequencies below 10 or 14 MHz (specific value can be selected by the access network) are reserved for the access network, while frequencies above them are reserved for the in-home network. Time-division multiplexing (TDM), in which the available channel time is split equally between both networks. 50% of time slots are allocated for the access network, and 50% are allocated to the in-home network.

    Read more →
  • Coreu

    Coreu

    COREU (French: Correspondance Européenne – Telex network of European correspondents, also EUKOR-Netzwerk in Austria) is a communication network of the European Union for the communication of the Council of the European Union, the European correspondents of the foreign ministries of the EU member states, permanent representatives of member states in Brussels, the European Commission, and the General Secretariat of the Council of the European Union. The European Parliament is not among the participants. COREU is the European equivalent of the American Secret Internet Protocol Router Network (SIPRNet, also known as Intelink-S). COREU's official aim is fast communication in case of crisis. The network enables a closer cooperation in matters regarding foreign affairs. In actuality the system's function exceeds that of mere communication, it also enables decision-making. COREU's first goal is to enable the exchange of information before and after decisions. Relaying upfront negotiations in preparation of meetings is the second goal. In addition, the system also allows the editing of documents and the decision-making, especially if there is little time. While the first two goals are preparatory measures for a shared foreign policy, the third is a methodical variant marked by practise that is defining for the image of the Common Foreign and Security Policy. == Members == (The following information dates from 2013): There is one representative in each of the capital cities in the EU.(since 1973) In Germany for example, this is the European correspondent (EU-KOR) from the Foreign Office. In Austria it is the European correspondent from the Referat II.1.a in the Federal Ministry for Europe, Integration and Foreign Affairs They are the correspondents (since 1982) for the European Commission They comprise the secretariat for the European Council They also make up the European External Action Service (EEAS) (responsible for foreign policy issues, since 1987) == Data volume and technical details == COREU functions as a spoke-hub distribution paradigm system with the hub in Brussels. The network is operated by the European Union Intelligence and Situation Centre (formerly Joint Situation Center, JSC). The technical infrastructure is located in a building of the European Council. COREU may be described as an advanced telex system with encrypted messages via dedicated terminals. Once a message has reached the destination, it is then redistributed via the local media. In contrast, messages of governments are transmitted via local media to the correspondents and from there delivered point-to-point to Brussels via COREU. In 2010, approximately 8500 communications had been distributed over this network. == History == A telex-based communication system under the name COREU was established in 1973. Originally, only the ministries of Foreign Affairs in the European capitals were connected to it. This telex system was replaced in 1997 by the mail system CORTESY (COREU Terminal Equipment System). The name was retained despite the technical innovation. COREU was reportedly compromised by hackers working for the People's Liberation Army Strategic Support Force, allowing for the theft of thousands of low-classified documents and diplomatic cables.

    Read more →
  • Image registration

    Image registration

    Image registration is the process of transforming different sets of data into one coordinate system. Data may be multiple photographs, data from different sensors, times, depths, or viewpoints. It is used in computer vision, medical imaging, military automatic target recognition, and compiling and analyzing images and data from satellites. Registration is necessary in order to be able to compare or integrate the data obtained from these different measurements. == Algorithm classification == === Intensity-based vs feature-based === Image registration or image alignment algorithms can be classified into intensity-based and feature-based. One of the images is referred to as the target, fixed or sensed image and the others are referred to as the moving or source images. Image registration involves spatially transforming the source/moving image(s) to align with the target image. The reference frame in the target image is stationary, while the other datasets are transformed to match to the target. Intensity-based methods compare intensity patterns in images via correlation metrics, while feature-based methods find correspondence between image features such as points, lines, and contours. Intensity-based methods register entire images or sub-images. If sub-images are registered, centers of corresponding sub images are treated as corresponding feature points. Feature-based methods establish a correspondence between a number of especially distinct points in images. Knowing the correspondence between a number of points in images, a geometrical transformation is then determined to map the target image to the reference images, thereby establishing point-by-point correspondence between the reference and target images. Methods combining intensity-based and feature-based information have also been developed. === Transformation models === Image registration algorithms can also be classified according to the transformation models they use to relate the target image space to the reference image space. The first broad category of transformation models includes affine transformations, which include rotation, scaling, translation and shearing. Affine transformations are global in nature, thus, they cannot model local geometric differences between images. The second category of transformations allow 'elastic' or 'nonrigid' transformations. These transformations are capable of locally warping the target image to align with the reference image. Nonrigid transformations include radial basis functions (thin-plate or surface splines, multiquadrics, and compactly-supported transformations), physical continuum models (viscous fluids), and large deformation models (diffeomorphisms). Transformations are commonly described by a parametrization, where the model dictates the number of parameters. For instance, the translation of a full image can be described by a translation vector parameter. These models are called parametric models. Non-parametric models on the other hand, do not follow any parameterization, allowing each image element to be displaced arbitrarily. There are a number of programs that implement both estimation and application of a warp-field. It is a part of the SPM and AIR programs. === Transformations of coordinates via the law of function composition rather than addition === Alternatively, many advanced methods for spatial normalization are building on structure preserving transformations homeomorphisms and diffeomorphisms since they carry smooth submanifolds smoothly during transformation. Diffeomorphisms are generated in the modern field of Computational Anatomy based on flows since diffeomorphisms are not additive although they form a group, but a group under the law of function composition. For this reason, flows which generalize the ideas of additive groups allow for generating large deformations that preserve topology, providing 1-1 and onto transformations. Computational methods for generating such transformation are often called LDDMM which provide flows of diffeomorphisms as the main computational tool for connecting coordinate systems corresponding to the geodesic flows of Computational Anatomy. There are a number of programs which generate diffeomorphic transformations of coordinates via diffeomorphic mapping including MRI Studio and MRI Cloud.org === Spatial vs frequency domain methods === Spatial methods operate in the image domain, matching intensity patterns or features in images. Some of the feature matching algorithms are outgrowths of traditional techniques for performing manual image registration, in which an operator chooses corresponding control points (CP) in images. When the number of control points exceeds the minimum required to define the appropriate transformation model, iterative algorithms like RANSAC can be used to robustly estimate the parameters of a particular transformation type (e.g. affine) for registration of the images. Frequency-domain methods find the transformation parameters for registration of the images while working in the transform domain. Such methods work for simple transformations, such as translation, rotation, and scaling. Applying the phase correlation method to a pair of images produces a third image which contains a single peak. The location of this peak corresponds to the relative translation between the images. Unlike many spatial-domain algorithms, the phase correlation method is resilient to noise, occlusions, and other defects typical of medical or satellite images. Additionally, the phase correlation uses the fast Fourier transform to compute the cross-correlation between the two images, generally resulting in large performance gains. The method can be extended to determine rotation and scaling differences between two images by first converting the images to log-polar coordinates. Due to properties of the Fourier transform, the rotation and scaling parameters can be determined in a manner invariant to translation. === Single- vs multi-modality methods === Another classification can be made between single-modality and multi-modality methods. Single-modality methods tend to register images in the same modality acquired by the same scanner/sensor type, while multi-modality registration methods tended to register images acquired by different scanner/sensor types. Multi-modality registration methods are often used in medical imaging as images of a subject are frequently obtained from different scanners. Examples include registration of brain CT/MRI images or whole body PET/CT images for tumor localization, registration of contrast-enhanced CT images against non-contrast-enhanced CT images for segmentation of specific parts of the anatomy, and registration of ultrasound and CT images for prostate localization in radiotherapy. === Automatic vs interactive methods === Registration methods may be classified based on the level of automation they provide. Manual, interactive, semi-automatic, and automatic methods have been developed. Manual methods provide tools to align the images manually. Interactive methods reduce user bias by performing certain key operations automatically while still relying on the user to guide the registration. Semi-automatic methods perform more of the registration steps automatically but depend on the user to verify the correctness of a registration. Automatic methods do not allow any user interaction and perform all registration steps automatically. === Similarity measures for image registration === Image similarities are broadly used in medical imaging. An image similarity measure quantifies the degree of similarity between intensity patterns in two images. The choice of an image similarity measure depends on the modality of the images to be registered. Common examples of image similarity measures include cross-correlation, mutual information, sum of squared intensity differences, and ratio image uniformity. Mutual information and normalized mutual information are the most popular image similarity measures for registration of multimodality images. Cross-correlation, sum of squared intensity differences and ratio image uniformity are commonly used for registration of images in the same modality. Many new features have been derived for cost functions based on matching methods via large deformations have emerged in the field Computational Anatomy including Measure matching which are pointsets or landmarks without correspondence, Curve matching and Surface matching via mathematical currents and varifolds. == Uncertainty == There is a level of uncertainty associated with registering images that have any spatio-temporal differences. A confident registration with a measure of uncertainty is critical for many change detection applications such as medical diagnostics. In remote sensing applications where a digital image pixel may represent several kilometers of spatial distance (such as NASA's LANDSAT imagery), an uncertain image registration can mean that a solution could b

    Read more →
  • Computer-aided software engineering

    Computer-aided software engineering

    Computer-aided software engineering (CASE) is a domain of software tools used to design and implement applications. CASE tools are similar to and are partly inspired by computer-aided design (CAD) tools used for designing hardware products. CASE tools are intended to help develop high-quality, defect-free, and maintainable software. CASE software was often associated with methods for the development of information systems together with automated tools that could be used in the software development process. == History == The Information System Design and Optimization System (ISDOS) project, started in 1968 at the University of Michigan, initiated a great deal of interest in the whole concept of using computer systems to help analysts in the very difficult process of analysing requirements and developing systems. Several papers by Daniel Teichroew fired a whole generation of enthusiasts with the potential of automated systems development. His Problem Statement Language / Problem Statement Analyzer (PSL/PSA) tool was a CASE tool although it predated the term. Another major thread emerged as a logical extension to the data dictionary of a database. By extending the range of metadata held, the attributes of an application could be held within a dictionary and used at runtime. This "active dictionary" became the precursor to the more modern model-driven engineering capability. However, the active dictionary did not provide a graphical representation of any of the metadata. It was the linking of the concept of a dictionary holding analysts' metadata, as derived from the use of an integrated set of techniques, together with the graphical representation of such data that gave rise to the earlier versions of CASE. The next entrant into the market was Excelerator from Index Technology in Cambridge, Mass. While DesignAid ran on Convergent Technologies and later Burroughs Ngen networked microcomputers, Index launched Excelerator on the IBM PC/AT platform. While, at the time of launch, and for several years, the IBM platform did not support networking or a centralized database as did the Convergent Technologies or Burroughs machines, the allure of IBM was strong, and Excelerator came to prominence. Hot on the heels of Excelerator were a rash of offerings from companies such as Knowledgeware (James Martin, Fran Tarkenton and Don Addington), Texas Instrument's CA Gen and Andersen Consulting's FOUNDATION toolset (DESIGN/1, INSTALL/1, FCP). CASE tools were at their peak in the early 1990s. According to the PC Magazine of January 1990, over 100 companies were offering nearly 200 different CASE tools. At the time IBM had proposed AD/Cycle, which was an alliance of software vendors centered on IBM's Software repository using IBM DB2 in mainframe and OS/2: The application development tools can be from several sources: from IBM, from vendors, and from the customers themselves. IBM has entered into relationships with Bachman Information Systems, Index Technology Corporation, and Knowledgeware wherein selected products from these vendors will be marketed through an IBM complementary marketing program to provide offerings that will help to achieve complete life-cycle coverage. With the decline of the mainframe, AD/Cycle and the Big CASE tools died off, opening the market for the mainstream CASE tools of today. Many of the leaders of the CASE market of the early 1990s ended up being purchased by Computer Associates, including IEW, IEF, ADW, Cayenne, and Learmonth & Burchett Management Systems (LBMS). The other trend that led to the evolution of CASE tools was the rise of object-oriented methods and tools. Most of the various tool vendors added some support for object-oriented methods and tools. In addition new products arose that were designed from the bottom up to support the object-oriented approach. Andersen developed its project Eagle as an alternative to Foundation. Several of the thought leaders in object-oriented development each developed their own methodology and CASE tool set: Jacobson, Rumbaugh, Booch, etc. Eventually, these diverse tool sets and methods were consolidated via standards led by the Object Management Group (OMG). The OMG's Unified Modelling Language (UML) is currently widely accepted as the industry standard for object-oriented modeling. == CASE software == === Tools === CASE tools support specific tasks in the software development life-cycle. They can be divided into the following categories: Business and analysis modeling: Graphical modeling tools. E.g., E/R modeling, object modeling, etc. Development: Design and construction phases of the life-cycle. Debugging environments. E.g., IISE LKO. Verification and validation: Analyze code and specifications for correctness, performance, etc. Configuration management: Control the check-in and check-out of repository objects and files. E.g., SCCS, IISE. Metrics and measurement: Analyze code for complexity, modularity (e.g., no "go to's"), performance, etc. Project management: Manage project plans, task assignments, scheduling. Another common way to distinguish CASE tools is the distinction between Upper CASE and Lower CASE. Upper CASE Tools support business and analysis modeling. They support traditional diagrammatic languages such as ER diagrams, Data flow diagram, Structure charts, Decision Trees, Decision tables, etc. Lower CASE Tools support development activities, such as physical design, debugging, construction, testing, component integration, maintenance, and reverse engineering. All other activities span the entire life-cycle and apply equally to upper and lower CASE. === Workbenches === Workbenches integrate two or more CASE tools and support specific software-process activities. Hence they achieve: A homogeneous and consistent interface (presentation integration) Seamless integration of tools and toolchains (control and data integration) An example workbench is Microsoft's Visual Basic programming environment. It incorporates several development tools: a GUI builder, a smart code editor, debugger, etc. Most commercial CASE products tended to be such workbenches that seamlessly integrated two or more tools. Workbenches also can be classified in the same manner as tools; as focusing on Analysis, Development, Verification, etc. as well as being focused on the upper case, lower case, or processes such as configuration management that span the complete life-cycle. === Environments === An environment is a collection of CASE tools or workbenches that attempts to support the complete software process. This contrasts with tools that focus on one specific task or a specific part of the life-cycle. CASE environments are classified by Fuggetta as follows: Toolkits: Loosely coupled collections of tools. These typically build on operating system workbenches such as the Unix Programmer's Workbench or the VMS VAX set. They typically perform integration via piping or some other basic mechanism to share data and pass control. The strength of easy integration is also one of the drawbacks. Simple passing of parameters via technologies such as shell scripting can't provide the kind of sophisticated integration that a common repository database can. Fourth generation: These environments are also known as 4GL standing for fourth generation language environments due to the fact that the early environments were designed around specific languages such as Visual Basic. They were the first environments to provide deep integration of multiple tools. Typically these environments were focused on specific types of applications. For example, user-interface driven applications that did standard atomic transactions to a relational database. Examples are Informix 4GL, and Focus. Language-centered: Environments based on a single often object-oriented language such as the Symbolics Lisp Genera environment or VisualWorks Smalltalk from Parcplace. In these environments all the operating system resources were objects in the object-oriented language. This provides powerful debugging and graphical opportunities but the code developed is mostly limited to the specific language. For this reason, these environments were mostly a niche within CASE. Their use was mostly for prototyping and R&D projects. A common core idea for these environments was the model–view–controller user interface that facilitated keeping multiple presentations of the same design consistent with the underlying model. The MVC architecture was adopted by the other types of CASE environments as well as many of the applications that were built with them. Integrated: These environments are an example of what most IT people tend to think of first when they think of CASE. Environments such as IBM's AD/Cycle, Andersen Consulting's FOUNDATION, the ICL CADES system, and DEC Cohesion. These environments attempt to cover the complete life-cycle from analysis to maintenance and provide an integrated database repository for storing all artifacts of the software pr

    Read more →
  • Critical security parameter

    Critical security parameter

    In cryptography, a critical security parameter (CSP) is information that is either user or system defined and is used to operate a cryptography module in processing encryption functions including cryptographic keys and authentication data, such as passwords, the disclosure or modification of which can compromise the security of a cryptographic module or the security of the information protected by the module.

    Read more →