AI Assistant Samsung

AI Assistant Samsung — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Document classification

    Document classification

    Document classification or document categorization is a problem in library science, information science and computer science. The task is to assign a document to one or more classes or categories. This may be done "manually" (or "intellectually") or algorithmically. The intellectual classification of documents has mostly been the province of library science, while the algorithmic classification of documents is mainly in information science and computer science. The problems are overlapping, however, and there is therefore interdisciplinary research on document classification. The documents to be classified may be texts, images, music, etc. Each kind of document possesses its special classification problems. When not otherwise specified, text classification is implied. Documents may be classified according to their subjects or according to other attributes (such as document type, author, printing year etc.). In the rest of this article only subject classification is considered. There are two main philosophies of subject classification of documents: the content-based approach and the request-based approach. == "Content-based" versus "request-based" classification == Content-based classification is classification in which the weight given to particular subjects in a document determines the class to which the document is assigned. It is, for example, a common rule for classification in libraries, that at least 20% of the content of a book should be about the class to which the book is assigned. In automatic classification it could be the number of times given words appears in a document. Request-oriented classification (or -indexing) is classification in which the anticipated request from users is influencing how documents are being classified. The classifier asks themself: “Under which descriptors should this entity be found?” and “think of all the possible queries and decide for which ones the entity at hand is relevant” (Soergel, 1985, p. 230). Request-oriented classification may be classification that is targeted towards a particular audience or user group. For example, a library or a database for feminist studies may classify/index documents differently when compared to a historical library. It is probably better, however, to understand request-oriented classification as policy-based classification: The classification is done according to some ideals and reflects the purpose of the library or database doing the classification. In this way it is not necessarily a kind of classification or indexing based on user studies. Only if empirical data about use or users are applied should request-oriented classification be regarded as a user-based approach. == Classification versus indexing == Sometimes a distinction is made between assigning documents to classes ("classification") versus assigning subjects to documents ("subject indexing") but as Frederick Wilfrid Lancaster has argued, this distinction is not fruitful. "These terminological distinctions,” he writes, “are quite meaningless and only serve to cause confusion” (Lancaster, 2003, p. 21). The view that this distinction is purely superficial is also supported by the fact that a classification system may be transformed into a thesaurus and vice versa (cf., Aitchison, 1986, 2004; Broughton, 2008; Riesthuis & Bliedung, 1991). Therefore, assigning a subject term to a document in an index is equivalent to assigning that document to the class of documents indexed by that term (all documents indexed or classified as X belong to the same class of documents). == Automatic document classification (ADC) == Automatic document classification tasks can be divided into three sorts: supervised document classification where some external mechanism (such as human feedback) provides information on the correct classification for documents, unsupervised document classification (also known as document clustering), where the classification must be done entirely without reference to external information, and semi-supervised document classification, where parts of the documents are labeled by the external mechanism. There are several software products under various license models available. === Techniques === Automatic document classification techniques include: Artificial neural network Concept Mining Decision trees such as ID3 or C4.5 Expectation maximization (EM) Instantaneously trained neural networks Latent semantic indexing Multiple-instance learning Naive Bayes classifier Natural language processing approaches Rough set-based classifier Soft set-based classifier Support vector machines (SVM) K-nearest neighbour algorithms tf–idf == Applications == Classification techniques have been applied to spam filtering, a process which tries to discern E-mail spam messages from legitimate emails email routing, sending an email sent to a general address to a specific address or mailbox depending on topic language identification, automatically determining the language of a text genre classification, automatically determining the genre of a text readability assessment, automatically determining the degree of readability of a text, either to find suitable materials for different age groups or reader types or as part of a larger text simplification system sentiment analysis, determining the attitude of a speaker or a writer with respect to some topic or the overall contextual polarity of a document. health-related classification using social media in public health surveillance article triage, selecting articles that are relevant for manual literature curation, for example as is being done as the first step to generate manually curated annotation databases in biology

    Read more →
  • Information leakage

    Information leakage

    Information leakage happens whenever a system that is designed to be closed to an eavesdropper reveals some information to unauthorized parties nonetheless. In other words: Information leakage occurs when secret information correlates with, or can be correlated with, observable information. For example, when designing an encrypted instant messaging network, a network engineer without the capacity to crack encryption codes could see when messages are transmitted, even if he could not read them. == Risk vectors == A modern example of information leakage is the leakage of secret information via data compression, by using variations in data compression ratio to reveal correlations between known (or deliberately injected) plaintext and secret data combined in a single compressed stream. Another example is the key leakage that can occur when using some public-key systems when cryptographic nonce values used in signing operations are insufficiently random. Bad randomness cannot protect proper functioning of a cryptographic system, even in a benign circumstance, it can easily produce crackable keys that cause key leakage. Information leakage can sometimes be deliberate: for example, an algorithmic converter may be shipped that intentionally leaks small amounts of information, in order to provide its creator with the ability to intercept the users' messages, while still allowing the user to maintain an illusion that the system is secure. This sort of deliberate leakage is sometimes known as a subliminal channel. Generally, only very advanced systems employ defenses against information leakage. Following are the commonly implemented countermeasures : Use steganography to hide the fact that a message is transmitted at all. Use chaffing to make it unclear to whom messages are transmitted (but this does not hide from others the fact that messages are transmitted). For busy re-transmitting proxies, such as a Mixmaster node: randomly delay and shuffle the order of outbound packets - this will assist in disguising a given message's path, especially if there are multiple, popular forwarding nodes, such as are employed with Mixmaster mail forwarding. When a data value is no longer going to be used, erase it from the memory.

    Read more →
  • Data Transformation Services

    Data Transformation Services

    Data Transformation Services (DTS) is a Microsoft database tool with a set of objects and utilities to allow the automation of extract, transform and load operations to or from a database. The objects are DTS packages and their components, and the utilities are called DTS tools. DTS was included with earlier versions of Microsoft SQL Server, and was almost always used with SQL Server databases, although it could be used independently with other databases. DTS allows data to be transformed and loaded from heterogeneous sources using OLE DB, ODBC, or text-only files, into any supported database. DTS can also allow automation of data import or transformation on a scheduled basis, and can perform additional functions such as FTPing files and executing external programs. In addition, DTS provides an alternative method of version control and backup for packages when used in conjunction with a version control system, such as Microsoft Visual SourceSafe. DTS has been superseded by SQL Server Integration Services in later releases of Microsoft SQL Server though there was some backwards compatibility and ability to run DTS packages in the new SSIS for a time. == History == In SQL Server versions 6.5 and earlier, database administrators (DBAs) used SQL Server Transfer Manager and Bulk Copy Program, included with SQL Server, to transfer data. These tools had significant shortcomings, and many DBAs used third-party tools such as Pervasive Data Integrator to transfer data more flexibly and easily. With the release of SQL Server 7 in 1998, "Data Transformation Services" was packaged with it to replace all these tools. The concept, design, and implementation of the Data Transformation Services was led by Stewart P. MacLeod (SQL Server Development Group Program Manager), Vij Rajarajan (SQL Server Lead Developer), and Ted Hart (SQL Server Lead Developer). The goal was to make it easier to import, export, and transform heterogeneous data and simplify the creation of data warehouses from operational data sources. SQL Server 2000 expanded DTS functionality in several ways. It introduced new types of tasks, including the ability to FTP files, move databases or database components, and add messages into Microsoft Message Queue. DTS packages can be saved as a Visual Basic file in SQL Server 2000, and this can be expanded to save into any COM-compliant language. Microsoft also integrated packages into Windows 2000 security and made DTS tools more user-friendly; tasks can accept input and output parameters. DTS comes with all editions of SQL Server 7 and 2000, but was superseded by SQL Server Integration Services in the Microsoft SQL Server 2005 release in 2005. == DTS packages == The DTS package is the fundamental logical component of DTS; every DTS object is a child component of the package. Packages are used whenever one modifies data using DTS. All the metadata about the data transformation is contained within the package. Packages can be saved directly in a SQL Server, or can be saved in the Microsoft Repository or in COM files. SQL Server 2000 also allows a programmer to save packages in a Visual Basic or other language file (when stored to a VB file, the package is actually scripted—that is, a VB script is executed to dynamically create the package objects and its component objects). A package can contain any number of connection objects, but does not have to contain any. These allow the package to read data from any OLE DB-compliant data source, and can be expanded to handle other sorts of data. The functionality of a package is organized into tasks and steps. A DTS Task is a discrete set of functionalities executed as a single step in a DTS package. Each task defines a work item to be performed as part of the data movement and data transformation process or as a job to be executed. Data Transformation Services supplies a number of tasks that are part of the DTS object model and that can be accessed graphically through the DTS Designer or accessed programmatically. These tasks, which can be configured individually, cover a wide variety of data copying, data transformation and notification situations. For example, the following types of tasks represent some actions that you can perform by using DTS: executing a single SQL statement, sending an email, and transferring a file with FTP. A step within a DTS package describes the order in which tasks are run and the precedence constraints that describe what to do in the case damage or of failure. These steps can be executed sequentially or in parallel. Packages can also contain global variables which can be used throughout the package. SQL Server 2000 allows input and output parameters for tasks, greatly expanding the usefulness of global variables. DTS packages can be edited, password protected, scheduled for execution, and retrieved by version. == DTS tools == DTS tools packaged with SQL Server include the DTS wizards, DTS Designer, and DTS Programming Interfaces. === DTS wizards === The DTS wizards can be used to perform simple or common DTS tasks. These include the Import/Export Wizard and the Copy of Database Wizard. They provide the simplest method of copying data between OLE DB data sources. There is a great deal of functionality that is not available by merely using a wizard. However, a package created with a wizard can be saved and later altered with one of the other DTS tools. A Create Publishing Wizard is also available to schedule packages to run at certain times. This only works if SQL Server Agent is running; otherwise the package will be scheduled, but will not be executed. === DTS Designer === The DTS Designer is a graphical tool used to build complex DTS Packages with workflows and event-driven logic. DTS Designer can also be used to edit and customize DTS Packages created with the DTS wizard. Each connection and task in DTS Designer is shown with a specific icon. These icons are joined with precedence constraints, which specify the order and requirements for tasks to be run. One task may run, for instance, only if another task succeeds (or fails). Other tasks may run concurrently. The DTS Designer has been criticized for having unusual quirks and limitations, such as the inability to visually copy and paste multiple tasks at one time. Many of these shortcomings have been overcome in SQL Server Integration Services, DTS's successor. === DTS Query Designer === A graphical tool used to build queries in DTS. === DTS Run Utility === DTS Packages can be run from the command line using the DTSRUN Utility. The utility is invoked using the following syntax: dtsrun /S server_name[\instance_name] { {/[~]U user_name [/[~]P password]} | /E } ] { {/[~]N package_name } | {/[~]G package_guid_string} | {/[~]V package_version_guid_string} } [/[~]M package_password] [/[~]F filename] [/[~]R repository_database_name] [/A global_variable_name:typeid=value] [/L log_file_name] [/W NT_event_log_completion_status] [/Z] [/!X] [/!D] [/!Y] [/!C] ] When passing in parameters which are mapped to Global Variables, you are required to include the typeid. This is rather difficult to find on the Microsoft site. Below are the TypeIds used in passing in these values.

    Read more →
  • Open Data-Link Interface

    Open Data-Link Interface

    The Open Data-Link Interface (ODI) is an application programming interface (API) for network interface controllers (NICs) developed by Apple and Novell. The API serves the same function as Microsoft and 3COM's Network Driver Interface Specification (NDIS). Originally, ODI was written for NetWare and Macintosh environments. Like NDIS, ODI provides rules that establish a vendor-neutral interface between the protocol stack and the adapter driver. It resides in Layer 2, the Data Link layer, of the OSI model. This interface also enables one or more network drivers to support one or more protocol stacks.

    Read more →
  • Calais (Reuters product)

    Calais (Reuters product)

    Calais is a service created by Thomson Reuters that automatically extracts semantic information from web pages in a format that can be used on the semantic web. Calais was launched in January 2008, and is free to use. The technology is now available via the website of Refinitiv, a provider of financial market data and infrastructure founded in 2018, that is a subsidiary of London Stock Exchange Group. The Calais Web service reads unstructured text and returns Resource Description Framework formatted results identifying entities, facts and events within the text. The service appears to be based on technology acquired when Reuters purchased ClearForest in 2007. The technology has also been used to automatically tag blog articles, and organize museum collections. Calais uses natural language processing technologies delivered via a web service interface.

    Read more →
  • Symmetric Boolean function

    Symmetric Boolean function

    In mathematics, a symmetric Boolean function is a Boolean function whose value does not depend on the order of its input bits, i.e., it depends only on the number of ones (or zeros) in the input. For this reason they are also known as Boolean counting functions. There are 2n+1 symmetric n-ary Boolean functions. Instead of the truth table, traditionally used to represent Boolean functions, one may use a more compact representation for an n-variable symmetric Boolean function: the (n + 1)-vector, whose i-th entry (i = 0, ..., n) is the value of the function on an input vector with i ones. Mathematically, the symmetric Boolean functions correspond one-to-one with the functions that map n+1 elements to two elements, f : { 0 , 1 , . . . , n } → { 0 , 1 } {\displaystyle f:\{0,1,...,n\}\rightarrow \{0,1\}} . Symmetric Boolean functions are used to classify Boolean satisfiability problems. == Special cases == A number of special cases are recognized: Majority function: their value is 1 on input vectors with more than n/2 ones Threshold functions: their value is 1 on input vectors with k or more ones for a fixed k All-equal and not-all-equal function: their values is 1 when the inputs do (not) all have the same value Exact-count functions: their value is 1 on input vectors with k ones for a fixed k One-hot or 1-in-n function: their value is 1 on input vectors with exactly one one One-cold function: their value is 1 on input vectors with exactly one zero Congruence functions: their value is 1 on input vectors with the number of ones congruent to k mod m for fixed k, m Parity function: their value is 1 if the input vector has odd number of ones The n-ary versions of AND, OR, XOR, NAND, NOR and XNOR are also symmetric Boolean functions. == Properties == In the following, f k {\displaystyle f_{k}} denotes the value of the function f : { 0 , 1 } n → { 0 , 1 } {\displaystyle f:\{0,1\}^{n}\rightarrow \{0,1\}} when applied to an input vector of weight k {\displaystyle k} . === Weight === The weight of the function can be calculated from its value vector: | f | = ∑ k = 0 n ( n k ) f k {\displaystyle |f|=\sum _{k=0}^{n}{\binom {n}{k}}f_{k}} === Algebraic normal form === The algebraic normal form either contains all monomials of certain order m {\displaystyle m} , or none of them; i.e. the Möbius transform f ^ {\displaystyle {\hat {f}}} of the function is also a symmetric function. It can thus also be described by a simple (n+1) bit vector, the ANF vector f ^ m {\displaystyle {\hat {f}}_{m}} . The ANF and value vectors are related by a Möbius relation: f ^ m = ⨁ k 2 ⊆ m 2 f k {\displaystyle {\hat {f}}_{m}=\bigoplus _{k_{2}\subseteq m_{2}}f_{k}} where k 2 ⊆ m 2 {\displaystyle k_{2}\subseteq m_{2}} denotes all the weights k whose base-2 representation is covered by the base-2 representation of m (a consequence of Lucas’ theorem). Effectively, an n-variable symmetric Boolean function corresponds to a log(n)-variable ordinary Boolean function acting on the base-2 representation of the input weight. For example, for three-variable functions: f ^ 0 = f 0 f ^ 1 = f 0 ⊕ f 1 f ^ 2 = f 0 ⊕ f 2 f ^ 3 = f 0 ⊕ f 1 ⊕ f 2 ⊕ f 3 {\displaystyle {\begin{array}{lcl}{\hat {f}}_{0}&=&f_{0}\\{\hat {f}}_{1}&=&f_{0}\oplus f_{1}\\{\hat {f}}_{2}&=&f_{0}\oplus f_{2}\\{\hat {f}}_{3}&=&f_{0}\oplus f_{1}\oplus f_{2}\oplus f_{3}\end{array}}} So the three variable majority function with value vector (0, 0, 1, 1) has ANF vector (0, 0, 1, 0), i.e.: Maj ( x , y , z ) = x y ⊕ x z ⊕ y z {\displaystyle {\text{Maj}}(x,y,z)=xy\oplus xz\oplus yz} === Unit hypercube polynomial === The coefficients of the real polynomial agreeing with the function on { 0 , 1 } n {\displaystyle \{0,1\}^{n}} are given by: f m ∗ = ∑ k = 0 m ( − 1 ) | k | + | m | ( m k ) f k {\displaystyle f_{m}^{}=\sum _{k=0}^{m}(-1)^{|k|+|m|}{\binom {m}{k}}f_{k}} For example, the three variable majority function polynomial has coefficients (0, 0, 1, -2): Maj ( x , y , z ) = ( x y + x z + y z ) − 2 ( x y z ) {\displaystyle {\text{Maj}}(x,y,z)=(xy+xz+yz)-2(xyz)} == Examples ==

    Read more →
  • Cryptovirology

    Cryptovirology

    Cryptovirology refers to the study of cryptography use in malware, such as ransomware and asymmetric backdoors. Traditionally, cryptography and its applications are defensive in nature, and provide privacy, authentication, and security to users. Cryptovirology employs a twist on cryptography, showing that it can also be used offensively. It can be used to mount extortion based attacks that cause loss of access to information, loss of confidentiality, and information leakage, tasks which cryptography typically prevents. The field was born with the observation that public-key cryptography can be used to break the symmetry between what an antivirus analyst sees regarding malware and what the attacker sees. The antivirus analyst sees a public key contained in the malware, whereas the attacker sees the public key contained in the malware as well as the corresponding private key (outside the malware) since the attacker created the key pair for the attack. The public key allows the malware to perform trapdoor one-way operations on the victim's computer that only the attacker can undo. == Overview == The field encompasses covert malware attacks in which the attacker securely steals private information such as symmetric keys, private keys, PRNG state, and the victim's data. Examples of such covert attacks are asymmetric backdoors. An asymmetric backdoor is a backdoor (e.g., in a cryptosystem) that can be used only by the attacker, even after it is found. This contrasts with the traditional backdoor that is symmetric, i.e., anyone that finds it can use it. Kleptography, a subfield of cryptovirology, is the study of asymmetric backdoors in key generation algorithms, digital signature algorithms, key exchanges, pseudorandom number generators, encryption algorithms, and other cryptographic algorithms. The NIST Dual EC DRBG random bit generator has an asymmetric backdoor in it. The EC-DRBG algorithm utilizes the discrete-log kleptogram from kleptography, which by definition makes the EC-DRBG a cryptotrojan. Like ransomware, the EC-DRBG cryptotrojan contains and uses the attacker's public key to attack the host system. The cryptographer Ari Juels indicated that NSA effectively orchestrated a kleptographic attack on users of the Dual EC DRBG pseudorandom number generation algorithm and that, although security professionals and developers have been testing and implementing kleptographic attacks since 1996, "you would be hard-pressed to find one in actual use until now." Due to public outcry about this cryptovirology attack, NIST rescinded the EC-DRBG algorithm from the NIST SP 800-90 standard. Covert information leakage attacks carried out by cryptoviruses, cryptotrojans, and cryptoworms that, by definition, contain and use the public key of the attacker is a major theme in cryptovirology. In "deniable password snatching," a cryptovirus installs a cryptotrojan that asymmetrically encrypts host data and covertly broadcasts it. This makes it available to everyone, noticeable by no one (except the attacker), and only decipherable by the attacker. An attacker caught installing the cryptotrojan claims to be a virus victim. An attacker observed receiving the covert asymmetric broadcast is one of the thousands, if not millions of receivers, and exhibits no identifying information whatsoever. The cryptovirology attack achieves "end-to-end deniability." It is a covert asymmetric broadcast of the victim's data. Cryptovirology also encompasses the use of private information retrieval (PIR) to allow cryptoviruses to search for and steal host data without revealing the data searched for even when the cryptotrojan is under constant surveillance. By definition, such a cryptovirus carries within its own coding sequence the query of the attacker and the necessary PIR logic to apply the query to host systems. == History == The first cryptovirology attack and discussion of the concept was by Adam L. Young and Moti Yung, at the time called "cryptoviral extortion" and it was presented at the 1996 IEEE Security & Privacy conference. In this attack, a cryptovirus, cryptoworm, or cryptotrojan contains the public key of the attacker and hybrid encrypts the victim's files. The malware prompts the user to send the asymmetric ciphertext to the attacker who will decipher it and return the symmetric decryption key it contains for a fee. The victim needs the symmetric key to decrypt the encrypted files if there is no way to recover the original files (e.g., from backups). The 1996 IEEE paper predicted that cryptoviral extortion attackers would one day demand e-money, long before Bitcoin even existed. Many years later, the media relabeled cryptoviral extortion as ransomware. In 2016, cryptovirology attacks on healthcare providers reached epidemic levels, prompting the U.S. Department of Health and Human Services to issue a Fact Sheet on Ransomware and HIPAA. The fact sheet states that when electronic protected health information is encrypted by ransomware, a breach has occurred, and the attack therefore constitutes a disclosure that is not permitted under HIPAA, the rationale being that an adversary has taken control of the information. Sensitive data might never leave the victim organization, but the break-in may have allowed data to be sent out undetected. California enacted a law that defines the introduction of ransomware into a computer system with the intent of extortion as being against the law. == Examples == === Tremor virus === While viruses in the wild have used cryptography in the past, the only purpose of such usage of cryptography was to avoid detection by antivirus software. For example, the tremor virus used polymorphism as a defensive technique in an attempt to avoid detection by anti-virus software. Though cryptography does assist in such cases to enhance the longevity of a virus, the capabilities of cryptography are not used in the payload. The One-half virus was amongst the first viruses known to have encrypted affected files. === Tro_Ransom.A virus === An example of a virus that informs the owner of the infected machine to pay a ransom is the virus nicknamed Tro_Ransom.A. This virus asks the owner of the infected machine to send $10.99 to a given account through Western Union. Virus.Win32.Gpcode.ag is a classic cryptovirus. This virus partially uses a version of 660-bit RSA and encrypts files with many different extensions. It instructs the owner of the machine to email a given mail ID if the owner desires the decryptor. If contacted by email, the user will be asked to pay a certain amount as ransom in return for the decryptor. === CAPI === It has been demonstrated that using just 8 different calls to Microsoft's Cryptographic API (CAPI), a cryptovirus can satisfy all its encryption needs. == Other uses of cryptography-enabled malware == Apart from cryptoviral extortion, there are other potential uses of cryptoviruses, such as deniable password snatching, cryptocounters, private information retrieval, and in secure communication between different instances of a distributed cryptovirus.

    Read more →
  • Merit Network

    Merit Network

    Merit Network, Inc., is a nonprofit member-governed organization providing high-performance computer networking and related services to educational, government, health care, and nonprofit organizations, primarily in Michigan. Created in 1966, Merit operates the longest running regional computer network in the United States. == Organization == Created in 1966 as the Michigan Educational Research Information Triad by Michigan State University (MSU), the University of Michigan (U-M), and Wayne State University (WSU), Merit was created to investigate resource sharing by connecting the mainframe computers at these three Michigan public research universities. Merit's initial three node packet-switched computer network was operational in October 1972 using custom hardware based on DEC PDP-11 minicomputers and software developed by the Merit staff and the staffs at the three universities. Over the next dozen years the initial network grew as new services such as dial-in terminal support, remote job submission, remote printing, and file transfer were added; as gateways to the national and international Tymnet, Telenet, and Datapac networks were established, as support for the X.25 and TCP/IP protocols was added; as additional computers such as WSU's MVS system and the UM's electrical engineering's VAX running UNIX were attached; and as new universities became Merit members. Merit's involvement in national networking activities started in the mid-1980s with connections to the national supercomputing centers and work on the 56 kbit/s National Science Foundation Network (NSFNET), the forerunner of today's Internet. From 1987 until April 1995, Merit re-engineered and managed the NSFNET backbone service. MichNet, Merit's regional network in Michigan was attached to NSFNET and in the early 1990s Merit began extending "the Internet" throughout Michigan, offering both direct connect and dial-in services, and upgrading the statewide network from 56 kbit/s to 1.5 Mbit/s, and on to 45, 155, 622 Mbit/s, and eventually 1 and 10 Gbit/s. In 2003 Merit began its transition to a facilities based network, using fiber optic facilities that it shares with its members, that it purchases or leases under long-term agreements, or that it builds. In addition to network connectivity services, Merit offers a number of related services within Michigan and beyond, including: Internet2 connectivity, VPN, Network monitoring, Voice over IP (VOIP), Cloud storage, E-mail, Domain Name, Network Time, VMware and Zimbra software licensing, Colocation, and professional development seminars, workshops, classes, conferences, and meetings. == History == === Creating the network: 1966 to 1973 === The Michigan Educational Research Information Triad (MERIT) was formed in the fall of 1966 by Michigan State University (MSU), University of Michigan (U-M), and Wayne State University (WSU). More often known as the Merit Computer Network or simply Merit, it was created to design and implement a computer network connecting the mainframe computers at the universities. In the fall of 1969, after funding for the initial development of the network had been secured, Bertram Herzog was named director for MERIT. Eric Aupperle was hired as senior engineer, and was charged with finding hardware to make the network operational. The National Science Foundation (NSF) and the State of Michigan provided the initial funding for the network. In June 1970, the Applied Dynamics Division of Reliance Electric in Saline, Michigan was contracted to build three Communication Computers or CCs. Each would consist of a Digital Equipment Corporation (DEC) PDP-11 computer, dataphone interfaces, and interfaces that would attach them directly to the mainframe computers. The cost was to be slightly less than the $300,000 ($2,487,100, adjusted for inflation) originally budgeted. Merit staff wrote the software that ran on the CCs, while staff at each of the universities wrote the mainframe software to interface to the CCs. The first completed connection linked the IBM S/360-67 mainframe computers running the Michigan Terminal System at WSU and U-M, and was publicly demonstrated on December 14, 1971. The MSU node was completed in October 1972, adding a CDC 6500 mainframe running Scope/Hustler. The network was officially dedicated on May 15, 1973. === Expanding the network: 1974 to 1985 === In 1974, Herzog returned to teaching in the University of Michigan's Industrial Engineering Department, and Aupperle was appointed as director. Use of the all uppercase name "MERIT" was abandoned in favor of the mixed case "Merit". The first network connections were host to host interactive connections which allowed person to remote computer or local computer to remote computer interactions. To this, terminal to host connections, batch connections (remote job submission, remote printing, batch file transfer), and interactive file copy were added. And, in addition to connecting to host computers over custom hardware interfaces, the ability to connect to hosts or other networks over groups of asynchronous ports and via X.25 were added. Merit interconnected with Telenet (later SprintNet) in 1976 to give Merit users dial-in access from locations around the United States. Dial-in access within the U.S. and internationally was further expanded via Merit's interconnections to Tymnet, ADP's Autonet, and later still the IBM Global Network as well as Merit's own expanding network of dial-in sites in Michigan, New York City, and Washington, D.C. In 1978, Western Michigan University (WMU) became the fourth member of Merit (prompting a name change, as the acronym Merit no longer made sense as the group was no longer a triad). To expand the network, the Merit staff developed new hardware interfaces for the Digital PDP-11 based on printed circuit technology. The new system became known as the Primary Communications Processor (PCP), with the earliest PCPs connecting a PDP-10 located at WMU and a DEC VAX running UNIX at U-M's Electrical Engineering department. A second hardware technology initiative in 1983 produced the smaller Secondary Communication Processors (SCP) based on DEC LSI-11 processors. The first SCP was installed at the Michigan Union in Ann Arbor, creating UMnet, which extended Merit's network connectivity deeply into the U-M campus. In 1983 Merit's PCP and SCP software was enhanced to support TCP/IP and Merit interconnected with the ARPANET. === National networking, NSFNET, and the Internet: 1986 to 1995 === In 1986 Merit engineered and operated leased lines and satellite links that allowed the University of Michigan to access the supercomputing facilities at Pittsburgh, San Diego, and NCAR. In 1987, Merit, IBM and MCI submitted a winning proposal to NSF to implement a new NSFNET backbone network. The new NSFNET backbone network service began July 1, 1988. It interconnected supercomputing centers around the country at 1.5 megabits per second (T1), 24 times faster than the 56 kilobits-per-second speed of the previous network. The NSFNET backbone grew to link scientists and educators on university campuses nationwide and connect them to their counterparts around the world. The NSFNET project caused substantial growth at Merit, nearly tripling the staff and leading to the establishment of a new 24-hour Network Operations Center at the U-M Computer Center. In September 1990 in anticipation of the NSFNET T3 upgrade and the approaching end of the 5-year NSFNET cooperative agreement, Merit, IBM, and MCI formed Advanced Network and Services (ANS), a new non-profit corporation with a more broadly based Board of Directors than the Michigan-based Merit Network. Under its cooperative agreement with NSF, Merit remained ultimately responsible for the operation of NSFNET, but subcontracted much of the engineering and operations work to ANS. In 1991 the NSFNET backbone service was expanded to additional sites and upgraded to a more robust 45 Mbit/s (T3) based network. The new T3 backbone was named ANSNet and provided the physical infrastructure used by Merit to deliver the NSFNET Backbone Service. On April 30, 1995, the NSFNET project came to an end, when the NSFNET backbone service was decommissioned and replaced by a new Internet architecture with commercial Internet service providers (ISPs) interconnected at Network Access Points provided by multiple providers across the country. === Bringing the Internet to Michigan: 1985 to 2001 === During the 1980s, Merit Network grew to serve eight member universities, with Oakland University joining in 1985 and Central Michigan University, Eastern Michigan University, and Michigan Technological University joining in 1987. In 1990, Merit's board of directors formally changed the organization's name to Merit Network, Inc., and created the name MichNet to refer to Merit's statewide network. The board also approved a staff proposal to allow organizations other than publicly supported universities, referred to as aff

    Read more →
  • Collaboration-oriented architecture

    Collaboration-oriented architecture

    Collaboration Oriented Architecture (COA) is a computer system that is designed to collaborate, or use services, from systems that are outside of the operators control. Collaboration Oriented Architecture will often use Service Oriented Architecture to deliver the technical framework. Collaboration Oriented Architecture is the ability to collaborate between systems that are based on the Jericho Forum principles or "Commandments". Bill Gates and Craig Mundie (Microsoft) clearly articulated the need for people to work outside of their organizations in a secure and collaborative manner in their opening keynote to the RSA Security Conference in February 2007. Successful implementation of a Collaboration Oriented Architecture implies the ability to successfully inter-work securely over the Internet and will typically mean the resolution of the problems that come with de-perimeterisation. == Etymology == The term Collaboration Oriented Architectures was defined and developed in a meeting of the Jericho Forum at a meeting held at HSBC on 6 July 2007. == Definition == The key elements that qualify a security architecture as a Collaboration Oriented Architecture are as follows; Protocol: Systems use appropriately secure protocols to communicate. Authentication: The protocol is authenticated with user and/or system credentials. Federation: User and/or systems credentials are accepted and validated by systems that are not under your (locus of) control. Network Agnostic: The design does not rely on a secure network, thus it will operate securely from an Intranet to raw-Internet Trust: The collaborating system have the capacity to be able to confirm to a specified degree of confidence that the components in a transaction chain have. Risk: The collaborating systems can make a risk assessment on any transaction based on the communicated levels of required trust, based on the required degree of identity, confidentiality, integrity, availability. == Authentication == Working in a collaborative multi-sourced environment implies the need for authentication, authorization and accountability which must interoperate / exchange outside of your locus / area of control. People/systems must be able to manage permissions of resources and rights of users they don't control There must be capability of trusting an organization, which can authenticate individuals or groups, thus eliminating the need to create separate identities In principle, only one instance of person / system / identity may exist, but privacy necessitates the support for multiple instances, or one instance with multiple facets, often referred to as personas Systems must be able to pass on security credentials /assertions Multiple loci (areas) of control must be supported

    Read more →
  • Media contacts database

    Media contacts database

    In public relations (PR) and marketing, a media contacts database is a resource which catalogs the names, contact information, and other details about people who work in various media professions. These include journalists, reporters, editors, publishers, contributors, freelance journalists, opinion writers, social media personalities/ influencers, TV show anchors, radio show hosts, DJs, and others. A media contacts database usually contains the following information: Full name of the media contact, The publication or channel they work for Designations (past and present) Topics they cover, or their beat Contact information found in public domains Online presence like blogs and other social networking sites Education Information == Overview == A media contacts database is a public relations tool that is maintained and used by PR professionals to pitch stories on a particular topic, product, or company to a specific group of journalists. These journalists would then write or speak about the particular topic in a relevant issue or episode of their shows. A media contacts database allows a PR professional to gain easy access to hundreds of journalists within a short span of time. Media contacts database are created and sold by many media research companies that offer such PR software for professionals.

    Read more →
  • Hyper-encryption

    Hyper-encryption

    Hyper-encryption is a form of encryption invented by Michael O. Rabin which uses a high-bandwidth source of public random bits, together with a secret key that is shared by only the sender and recipient(s) of the message. It uses the assumptions of Ueli Maurer's bounded-storage model as the basis of its secrecy. Although everyone can see the data, decryption by adversaries without the secret key is still not feasible, because of the space limitations of storing enough data to mount an attack against the system. Unlike almost all other cryptosystems except the one-time pad, hyper-encryption can be proved to be information-theoretically secure, provided the storage bound cannot be surpassed. Moreover, if the necessary public information cannot be stored at the time of transmission, the plaintext can be shown to be impossible to recover, regardless of the computational capacity available to an adversary in the future, even if they have access to the secret key at that future time. A highly energy-efficient implementation of a hyper-encryption chip was demonstrated by Krishna Palem et al. using the Probabilistic CMOS or PCMOS technology and was shown to be ~205 times more efficient in terms of Energy-Performance-Product.

    Read more →
  • AS1 (networking)

    AS1 (networking)

    AS1 (Applicability Statement 1) is a specification about how to transport structured business-to-business data securely and reliably over the Internet. Security is achieved by using digital certificates and encryption. == AS1 technical overview == The AS1 protocol is based on SMTP and S/MIME. It was the first AS protocol developed and uses signing, encryption and MDN conventions. In other words: Files are sent as "attachments" in a specially coded SMIME email message Messages can be signed, but do not have to be Messages can be encrypted, but do not have to be Messages may request an MDN back if all went well, but do not have to request such a message If the original AS1 message requested an MDN... Upon the receipt of the message and its successful decryption or signature validation (as necessary) a "success" MDN will be sent back to the original sender. This MDN is typically signed but not encrypted. Upon the receipt and successful verification of the signature on the MDN, the original sender will "know" that the recipient got their message (this provides the "Non-repudiation" element of AS1) If there are any problems receiving or interpreting the original AS1 message, a "failed" MDN may be sent back. Like any other AS file transfer, AS1 file transfers typically require both sides of the exchange to trade X.509 certificates and specific "trading partner" names before any transfers can take place.

    Read more →
  • Data cube

    Data cube

    In computer programming, a data cube (or datacube) is a multi-dimensional array of values. Typically, the term "data cube" is applied in contexts where these arrays are massively larger than the hosting computer's main memory; examples include multi-terabyte/petabyte data warehouses and time series of image data. Even though it is called a cube, a data cube generally is a multi-dimensional concept which can be 1-dimensional, 2-dimensional, 3-dimensional, or higher-dimensional. The data cube is used to represent data (sometimes called facts) along some dimensions of interest. In satellite image timeseries, dimensions would be latitude and longitude coordinates and time; a fact (sometimes called measure) would be a pixel at a given space and time as taken by the satellite. For example, in online analytical processing, an OLAP cube about a company would have dimensions that could be the company subsidiaries, the company products, and time; in this setup, a fact would be a sales event where a particular product has been sold in a particular subsidiary at a particular time. In any case, every dimension divides data into groups of cells whereas each cell in the cube represents a single measure of interest. Sometimes cubes hold only a few values with the rest being empty, i.e. undefined, while sometimes most or all cube coordinates hold a cell value. In the first case such data are called sparse, and in the second case they are called dense, although there is no hard delineation between the two. Data cubes may be stored in database management systems (DBMS) as part of array DBMS. Spatio-temporal databases and geospatial databases may also be represented as coverage data. == History == Multi-dimensional arrays have long been familiar in programming languages. Fortran offers arbitrarily-indexed 1-D arrays and arrays of arrays, which allows the construction of higher-dimensional arrays, up to 15 dimensions. APL supports n-D arrays with a rich set of operations. All these have in common that arrays must fit into the main memory and are available only while the particular program maintaining them (such as image processing software) is running. A series of data exchange formats support storage and transmission of data cube-like data, often tailored towards particular application domains. Examples include MDX for statistical (in particular, business) data, Zarr and Hierarchical Data Format for general scientific data, and TIFF for imagery. In 1992, Peter Baumann introduced management of massive data cubes with high-level user functionality combined with an efficient software architecture. Datacube operations include subset extraction, processing, fusion, and in general queries in the spirit of data manipulation languages like SQL. Some years after, the data cube concept was applied to describe time-varying business data as data cubes by Jim Gray, et al., and by Venky Harinarayan, Anand Rajaraman and Jeff Ullman. Around that time, a working group on Multi-Dimensional Databases ("Arbeitskreis Multi-Dimensionale Datenbanken") was established at German Gesellschaft für Informatik. Datacube Inc. was an image processing company selling hardware and software applications for the PC market in 1996, however without addressing data cubes as such. The EarthServer initiative has established geo data cube service requirements. == Standardization == In 2018, the ISO SQL database language was extended with data cube functionality as "SQL – Part 15: Multi-dimensional arrays (SQL/MDA)". Web Coverage Processing Service is a geo data cube analytics language issued by the Open Geospatial Consortium in 2008. In addition to the common data cube operations, the language knows about the semantics of space and time and supports both regular and irregular grid data cubes, based on the concept of coverage data. An industry standard for querying business data cubes, originally developed by Microsoft, is MultiDimensional eXpressions. == Implementation == Many high-level computer languages treat data cubes and other large arrays as single entities distinct from their contents. These languages, of which Fortran, APL, IDL, NumPy, PDL, and S-Lang are examples, allow the programmer to manipulate complete film clips and other data en masse with simple expressions derived from linear algebra and vector mathematics. Some languages (such as PDL) distinguish between a list of images and a data cube, while many (such as IDL) do not. Array DBMSs (Database Management Systems) offer a data model which generically supports definition, management, retrieval, and manipulation of n-dimensional data cubes. This database category has been pioneered by the rasdaman system since 1994. == Applications == Multi-dimensional arrays can meaningfully represent spatio-temporal sensor, image, and simulation data, but also statistics data where the semantics of dimensions is not necessarily of spatial or temporal nature. Generally, any kind of axis can be combined with any other into a data cube. === Mathematics === In mathematics, a one-dimensional array corresponds to a vector, a two-dimensional array resembles a matrix; more generally, a tensor may be represented as an n-dimensional data cube. === Science and engineering === For a time sequence of color images, the array is generally four-dimensional, with the dimensions representing image X and Y coordinates, time, and RGB (or other color space) color plane. For example, the EarthServer initiative unites data centers from different continents offering 3-D x/y/t satellite image timeseries and 4-D x/y/z/t weather data for retrieval and server-side processing through the Open Geospatial Consortium WCPS geo data cube query language standard. A data cube is also used in the field of imaging spectroscopy, since a spectrally-resolved image is represented as a three-dimensional volume. Earth observation data cubes combine satellite imagery such as Landsat 8 and Sentinel-2 with Geographic information system analytics. === Business intelligence === In online analytical processing (OLAP), data cubes are a common arrangement of business data suitable for analysis from different perspectives through operations like slicing, dicing, pivoting, and aggregation.

    Read more →
  • Scalable Coherent Interface

    Scalable Coherent Interface

    The Scalable Coherent Interface or Scalable Coherent Interconnect (SCI), is a high-speed interconnect standard for shared memory multiprocessing and message passing. The goal was to scale well, provide system-wide memory coherence and a simple interface; i.e. a standard to replace existing buses in multiprocessor systems with one with no inherent scalability and performance limitations. The IEEE Std 1596-1992, IEEE Standard for Scalable Coherent Interface (SCI) was approved by the IEEE standards board on March 19, 1992. It saw some use during the 1990s, but never became widely used and has been replaced by other systems from the early 2000s. == History == Soon after the Fastbus (IEEE 960) follow-on Futurebus (IEEE 896) project in 1987, some engineers predicted it would already be too slow for the high performance computing marketplace by the time it would be released in the early 1990s. In response, a "Superbus" study group was formed in November 1987. Another working group of the standards association of the Institute of Electrical and Electronics Engineers (IEEE) spun off to form a standard targeted at this market in July 1988. It was essentially a subset of Futurebus features that could be easily implemented at high speed, along with minor additions to make it easier to connect to other systems, such as VMEbus. Most of the developers had their background from high-speed computer buses. Representatives from companies in the computer industry and research community included Amdahl, Apple Computer, BB&N, Hewlett-Packard, CERN, Dolphin Server Technology, Cray Research, Sequent, AT&T, Digital Equipment Corporation, McDonnell Douglas, National Semiconductor, Stanford Linear Accelerator Center, Tektronix, Texas Instruments, Unisys, University of Oslo, University of Wisconsin. The original intent was a single standard for all buses in the computer. The working group soon came up with the idea of using point-to-point communication in the form of insertion rings. This avoided the lumped capacitance, limited physical length/speed of light problems and stub reflections in addition to allowing parallel transactions. The use of insertion rings is credited to Manolis Katevenis who suggested it at one of the early meetings of the working group. The working group for developing the standard was led by David B. Gustavson (chair) and David V. James (Vice Chair). David V. James was a major contributor for writing the specifications including the executable C-code. Stein Gjessing’s group at the University of Oslo used formal methods to verify the coherence protocol and Dolphin Server Technology implemented a node controller chip including the cache coherence logic. Different versions and derivatives of SCI were implemented by companies like Dolphin Interconnect Solutions, Convex, Data General AViiON (using cache controller and link controller chips from Dolphin), Sequent and Cray Research. Dolphin Interconnect Solutions implemented a PCI and PCI-Express connected derivative of SCI that provides non-coherent shared memory access. This implementation was used by Sun Microsystems for its high-end clusters, Thales Group and several others including volume applications for message passing within HPC clustering and medical imaging. SCI was often used to implement non-uniform memory access architectures. It was also used by Sequent Computer Systems as the processor memory bus in their NUMA-Q systems. Numascale developed a derivative to connect with coherent HyperTransport. == The standard == The standard defined two interface levels: The physical level that deals with electrical signals, connectors, mechanical and thermal conditions The logical level that describes the address space, data transfer protocols, cache coherence mechanisms, synchronization primitives, control and status registers, and initialization and error recovery facilities. This structure allowed new developments in physical interface technology to be easily adapted without any redesign on the logical level. Scalability for large systems is achieved through a distributed directory-based cache coherence model. (The other popular models for cache coherency are based on system-wide eavesdropping (snooping) of memory transactions – a scheme which is not very scalable.) In SCI each node contains a directory with a pointer to the next node in a linked list that shares a particular cache line. SCI defines a 64-bit flat address space (16 exabytes) where 16 bits are used for identifying a node (65,536 nodes) and 48 bits for address within the node (256 terabytes). A node can contain many processors and/or memory. The SCI standard defines a packet switched network. === Topologies === SCI can be used to build systems with different types of switching topologies from centralized to fully distributed switching: With a central switch, each node is connected to the switch with a ringlet (in this case a two-node ring). In distributed switching systems, each node can be connected to a ring of arbitrary length and either all or some of the nodes can be connected to two or more rings. The most common way to describe these multi-dimensional topologies is k-ary n-cubes (or tori). The SCI standard specification mentions several such topologies as examples. The 2-D torus is a combination of rings in two dimensions. Switching between the two dimensions requires a small switching capability in the node. This can be expanded to three or more dimensions. The concept of folding rings can also be applied to the Torus topologies to avoid any long connection segments. === Transactions === SCI sends information in packets. Each packet consists of an unbroken sequence of 16-bit symbols. The symbol is accompanied by a flag bit. A transition of the flag bit from 0 to 1 indicates the start of a packet. A transition from 1 to 0 occurs 1 (for echoes) or 4 symbols before the packet end. A packet contains a header with address command and status information, payload (from 0 through optional lengths of data) and a CRC check symbol. The first symbol in the packet header contains the destination node address. If the address is not within the domain handled by the receiving node, the packet is passed to the output through the bypass FIFO. In the other case, the packet is fed to a receive queue and may be transferred to a ring in another dimension. All packets are marked when they pass the scrubber (a node is established as scrubber when the ring is initialized). Packets without a valid destination address will be removed when passing the scrubber for the second time to avoid filling the ring with packets that would otherwise circulate indefinitely. === Cache coherence === Cache coherence ensures data consistency in multiprocessor systems. The simplest form applied in earlier systems was based on clearing the cache contents between context switches and disabling the cache for data that were shared between two or more processors. These methods were feasible when the performance difference between the cache and memory were less than one order of magnitude. Modern processors with caches that are more than two orders of magnitude faster than main memory would not perform anywhere near optimal without more sophisticated methods for data consistency. Bus based systems use eavesdropping (snooping) methods since buses are inherently broadcast. Modern systems with point-to point links use broadcast methods with snoop filter options to improve performance. Since broadcast and eavesdropping are inherently non-scalable, these are not used in SCI. Instead, SCI uses a distributed directory-based cache coherence protocol with a linked list of nodes containing processors that share a particular cache line. Each node holds a directory for the main memory of the node with a tag for each line of memory (same line length as the cache line). The memory tag holds a pointer to the head of the linked list and a state code for the line (three states – home, fresh, gone). Associated with each node is also a cache for holding remote data with a directory containing forward and backward pointers to nodes in the linked list sharing the cache line. The tag for the cache has seven states (invalid, only fresh, head fresh, only dirty, head dirty, mid valid, tail valid). The distributed directory is scalable. The overhead for the directory based cache coherence is a constant percentage of the node’s memory and cache. This percentage is in the order of 4% for the memory and 7% for the cache. == Legacy == SCI is a standard for connecting the different resources within a multiprocessor computer system, and it is not as widely known to the public as for example the Ethernet family for connecting different systems. Different system vendors implemented different variants of SCI for their internal system infrastructure. These different implementations interface to very intricate mechanisms in processors and memory systems and each vendor has to preserve some degrees of

    Read more →
  • Clustered file system

    Clustered file system

    A clustered file system (CFS) is a file system which is shared by being simultaneously mounted on multiple servers. There are several approaches to clustering, most of which do not employ a clustered file system (only direct attached storage for each node). Clustered file systems can provide features like location-independent addressing and redundancy which improve reliability or reduce the complexity of the other parts of the cluster. Parallel file systems are a type of clustered file system that spread data across multiple storage nodes, usually for redundancy or performance. == Shared-disk file system == A shared-disk file system uses a storage area network (SAN) to allow multiple computers to gain direct disk access at the block level. Access control and translation from file-level operations that applications use to block-level operations used by the SAN must take place on the client node. The most common type of clustered file system, the shared-disk file system – by adding mechanisms for concurrency control – provides a consistent and serializable view of the file system, avoiding corruption and unintended data loss even when multiple clients try to access the same files at the same time. Shared-disk file-systems commonly employ some sort of fencing mechanism to prevent data corruption in case of node failures, because an unfenced device can cause data corruption if it loses communication with its sister nodes and tries to access the same information other nodes are accessing. The underlying storage area network may use any of a number of block-level protocols, including SCSI, iSCSI, HyperSCSI, ATA over Ethernet (AoE), Fibre Channel, network block device, and InfiniBand. There are different architectural approaches to a shared-disk filesystem. Some distribute file information across all the servers in a cluster (fully distributed). === Examples === == Distributed file systems == Distributed file systems do not share block level access to the same storage but use a network protocol. These are commonly known as network file systems, even though they are not the only file systems that use the network to send data. Distributed file systems can restrict access to the file system depending on access lists or capabilities on both the servers and the clients, depending on how the protocol is designed. The difference between a distributed file system and a distributed data store is that a distributed file system allows files to be accessed using the same interfaces and semantics as local files – for example, mounting/unmounting, listing directories, read/write at byte boundaries, system's native permission model. Distributed data stores, by contrast, require using a different API or library and have different semantics (most often those of a database). === Design goals === Distributed file systems may aim for "transparency" in a number of aspects. That is, they aim to be "invisible" to client programs, which "see" a system which is similar to a local file system. Behind the scenes, the distributed file system handles locating files, transporting data, and potentially providing other features listed below. Access transparency: clients are unaware that files are distributed and can access them in the same way as local files are accessed. Location transparency: a consistent namespace exists encompassing local as well as remote files. The name of a file does not give its location. Concurrency transparency: all clients have the same view of the state of the file system. This means that if one process is modifying a file, any other processes on the same system or remote systems that are accessing the files will see the modifications in a coherent manner. Failure transparency: the client and client programs should operate correctly after a server failure. Heterogeneity: file service should be provided across different hardware and operating system platforms. Scalability: the file system should work well in small environments (1 machine, a dozen machines) and also scale gracefully to bigger ones (hundreds through tens of thousands of systems). Replication transparency: Clients should not have to be aware of the file replication performed across multiple servers to support scalability. Migration transparency: files should be able to move between different servers without the client's knowledge. === History === The Incompatible Timesharing System used virtual devices for transparent inter-machine file system access in the 1960s. More file servers were developed in the 1970s. In 1976, Digital Equipment Corporation created the File Access Listener (FAL), an implementation of the Data Access Protocol as part of DECnet Phase II which became the first widely used network file system. In 1984, Sun Microsystems created the file system called "Network File System" (NFS) which became the first widely used Internet Protocol based network file system. Other notable network file systems are Andrew File System (AFS), Apple Filing Protocol (AFP), NetWare Core Protocol (NCP), and Server Message Block (SMB) which is also known as Common Internet File System (CIFS). In 1986, IBM announced client and server support for Distributed Data Management Architecture (DDM) for the System/36, System/38, and IBM mainframe computers running CICS. This was followed by the support for IBM Personal Computer, AS/400, IBM mainframe computers under the MVS and VSE operating systems, and FlexOS. DDM also became the foundation for Distributed Relational Database Architecture, also known as DRDA. There are many peer-to-peer network protocols for open-source distributed file systems for cloud or closed-source clustered file systems, e. g.: 9P, AFS, Coda, CIFS/SMB, DCE/DFS, WekaFS, Lustre, PanFS, Google File System, Mnet, Chord Project. === Examples === == Network-attached storage == Network-attached storage (NAS) provides both storage and a file system, like a shared disk file system on top of a storage area network (SAN). NAS typically uses file-based protocols (as opposed to block-based protocols a SAN would use) such as NFS (popular on UNIX systems), SMB/CIFS (Server Message Block/Common Internet File System) (used with MS Windows systems), AFP (used with Apple Macintosh computers), or NCP (used with OES and Novell NetWare). == Design considerations == === Avoiding single point of failure === The failure of disk hardware or a given storage node in a cluster can create a single point of failure that can result in data loss or unavailability. Fault tolerance and high availability can be provided through data replication of one sort or another, so that data remains intact and available despite the failure of any single piece of equipment. For examples, see the lists of distributed fault-tolerant file systems and distributed parallel fault-tolerant file systems. === Performance === A common performance measurement of a clustered file system is the amount of time needed to satisfy service requests. In conventional systems, this time consists of a disk-access time and a small amount of CPU-processing time. But in a clustered file system, a remote access has additional overhead due to the distributed structure. This includes the time to deliver the request to a server, the time to deliver the response to the client, and for each direction, a CPU overhead of running the communication protocol software. === Concurrency === Concurrency control becomes an issue when more than one person or client is accessing the same file or block and want to update it. Hence updates to the file from one client should not interfere with access and updates from other clients. This problem is more complex with file systems due to concurrent overlapping writes, where different writers write to overlapping regions of the file concurrently. This problem is usually handled by concurrency control or locking which may either be built into the file system or provided by an add-on protocol. == History == IBM mainframes in the 1970s could share physical disks and file systems if each machine had its own channel connection to the drives' control units. In the 1980s, Digital Equipment Corporation's TOPS-20 and OpenVMS clusters (VAX/ALPHA/IA64) included shared disk file systems.

    Read more →