AI Assistant Zalando

AI Assistant Zalando — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Ciscogate

  Ciscogate, also known as the Black Hat Bug, is the name given to a legal incident that occurred at the Black Hat Briefings security conference in Las Vegas, Nevada, on July 27, 2005. On the morning of the first day of the conference, July 26, 2005, some attendees noticed that 30 pages of text had been physically ripped out of the extensive conference presentation booklet the night before at the request of Cisco Systems and the CD-ROM with presentation slides was not included. It was determined the pages covered a talk to be given by Michael Lynn, a security researcher with Atlanta-based IBM Internet Security Systems (ISS). Instead of the pages with the details, attendees found a photographed copy of a notice from Black Hat saying "Due to some last minute changes beyond Black Hat's control, and at the request of the presenter, the included materials aren't up to the standards Black Hat tries to meet. Black Hat will be the first to apologize. We hope the vendors involved will follow suit." According to Lynn's lawyer, his employer had approved of the talk leading up to the conference but changed their minds two days before the scheduled talk, forbidding him from presenting. Lynn's original presentation was to cover a vulnerability in Cisco routers. The presentation was one of four scheduled to follow Jeff Moss' keynote address on the first day of the conference, titled "Cisco IOS Security Architecture". After being told by his employer that he could not present on the topic, Lynn chose an alternate topic. Cisco and ISS had offered to give new joint presentation but this was turned down by Black Hat because the original speaking slot was given to Lynn, not Cisco. Lynn's presentation began by covering security issues in services that allow users to make Voice over IP telephone calls. Shortly after beginning the presentation Lynn changed back to his original topic and began disclosing some technical details of the vulnerability he found in Cisco routers stating that he would rather resign from his job at ISS than keep the details private. == Lawsuit == Shortly after Lynn concluded his talk he met Jennifer Granick, who would soon become his lawyer. During their initial meeting Lynn told Granick that he expected to be sued. Later in the evening Lynn had heard that Cisco and ISS had filed a lawsuit and requested a temporary restraining order against Black Hat but not himself. A public relations representative from Black Hat told Granick that the lawsuit was against both Black Hat and Lynn and that the companies had scheduled an Ex parte hearing in San Francisco the next morning to request the restraining order. That night, Andrew Valentine, an attorney for ISS and Cisco called Lynn who directed them to Granick. During the conversation Valentine explained the claims and accusations against Lynn, which included three things: 1) ISS claimed copyright over the presentation that Lynn gave, 2) Cisco claimed copyright over the decompiled machine code obtained from the router which was included in the presentation, and 3) Cisco claimed the presentation contained trade secrets. These complaints were outlined in a civil complaint at the U.S. Northern District of California and filed against both Lynn and Black Hat. According to Granick, she and Valentine were able agree to an injunction to settle the case without court proceedings. This deal was almost called off due to an inadvertent mistake by Black Hat in which they had restored Lynn's presentation on their web server. Black Hat, Granick, and the plaintiff's lawyers were able to resolve this problem and the deal stood. One condition of the settlement required Lynn to provide an image of all computer data he used in his research to be provided to a third party for forensic analysis before erasing his research and any Cisco data from his systems. The settlement also stipulated that Lynn was prohibited from talking about the vulnerability in the future. == FBI Investigation == Shortly after lawyers for Lynn and ISS / Cisco filed settlement papers, FBI agents from the Las Vegas office arrived at the conference to begin asking questions. According to Granick, they were there at the request of the Atlanta FBI office and Lynn was not of interest. Granick asserted the Fifth and Sixth amendment rights on behalf of her client, Lynn. Granick asserted his rights for the Atlanta office and asked if an arrest warrant had been issued for Lynn. Over the next 24 hours Granick was not able to ascertain the status of a warrant but ultimately determined no warrant was issued. When the FBI was asked about the case by a journalist, spokesman Paul Bresson declined to discuss the case saying "Our policy is to not make any comment on anything that is ongoing. That's not to confirm that something is, because I really don't know". Granick would only confirm to journalists that the "investigation has to do with the presentation". == Response == === Attendees === Attendees of Black Hat Briefings, as well as many that also attended DEF CON, were not happy with vendors threatening legal action over vulnerability disclosure. The term "Ciscogate" was coined quickly by an unknown person, but some attendees were quick to create shirts to commemorate the incident. === Cisco === Mojgan Khalili, a senior manager for corporate PR at Cisco, issued a statement to the press saying "It is important to note that the information Mr. Lynn presented was not a disclosure of a new vulnerability or a flaw with Cisco IOS software. Mr. Lynn's research explores possible ways to expand exploitations of existing security vulnerabilities impacting routers." === ISS === Kim Duffy, managing director of ISS Australia, was asked about ISS's response to the incident. Duffy responded that it was "business as usual" as the company handled the incident "strictly by the book". He gave a brief statement to ZDNet UK saying "ISS has published rules for disclosure and that is what we stick to. We didn't care to publish [the disclosure] because we were not ready. We had not completed the research to our satisfaction so it was not ready to be disclosed". ISS spokesperson Roger Fortier confirmed that Lynn was no longer employed with the company and that ISS was still working with Cisco on the matter. He gave a statement to the Washington Post saying "ISS and Cisco have been working on this in the background and didn't feel at this time that the material was ready for publication. The decision was made on Monday to pull the presentation because we wanted to make sure the research was fully baked."

  Read more →
• 

  Instagram egg

  The Instagram egg is a photo of an egg posted by the account @world_record_egg on the social media platform Instagram. It became a global phenomenon and an internet meme within days of its publication on 4 January 2019. It is the second most-liked Instagram post and was the most-liked Instagram post from 14 January 2019 until 20 December 2022, when it was overtaken by Lionel Messi's post showing him and his teammates celebrating after Argentina won the 2022 FIFA World Cup. The owner of the account was revealed to be Chris Godfrey, a British advertising creative, who later worked with his two friends Alissa Khan-Whelan and CJ Brown on a Hulu commercial featuring the egg, intended to raise mental health awareness. == Background == The photo was originally taken by Serghei Platanov, who then posted it to Shutterstock on 23 June 2015 with the title "eggs isolated on white background". == History == On 4 January 2019, the @world_record_egg account was created, and posted an image of a bird egg with the caption, "Let's set a world record together and get the most liked post on Instagram. Beating the current world record held by Kylie Jenner (18 million)! We got this." Jenner's previous record, the first photo of her daughter Stormi, had garnered a total of 18.4 million likes. The post quickly reached 18.4 million likes in just under 10 days, becoming the most-liked Instagram post at the time. It then continued to rise over 45 million likes in the next 48 hours, surpassing the "Despacito" music video and taking the world record for the most-liked online post (on any media platform) in history. After the account became verified on 14 January 2019, the post rose in popularity and likes, which snowballed into coverage in various media outlets. By 18 March 2019, the post had accumulated over 53.3 million likes, nearly three times the previous record of 18.4 million. It posted frequent updates for a few days in the form of Instagram Stories. Alongside the like tally, as of January 2023 the post has 3.8 million comments. Several individuals tried to claim that they were the account's creator, the claims being dismissed by "the egg" on Instagram direct messages. On 3 February 2019, the creator of the Instagram egg was revealed by Hulu and The New York Times to be Chris Godfrey, a British advertising creative. Alissa Khan-Whelan, his colleague, was also outed. On 18 January 2019, the account posted a second picture of an egg, almost identical to the first one apart from a small crack at the top left. As of 25 February 2019, the post accumulated 11.8 million likes. On 22 January 2019, the account posted a third picture of an egg, this time having two larger cracks. In less than 25 minutes, the post accumulated 1 million likes, and by 25 February 2019, it had accumulated 9.5 million likes. On 29 January 2019, a fourth picture of an egg was posted to the account which has another large crack on the right hand side, attracting 7.6 million likes by 25 February 2019. On 1 February 2019, a fifth picture of an egg was posted with stitching like that of a football, referencing the upcoming Super Bowl. That post had accumulated 6.5 million likes by 25 February 2019. The account promised that it would reveal what was inside the egg on 3 February, on the subscription video on demand service Hulu. The Hulu Instagram egg reveal was used to promote an animation about a mental health campaign. A caption from the clip read, "Recently I've started to crack, the pressure of social media is getting to me. If you're struggling too, talk to someone." The video was later posted on the @world_record_egg Instagram account, and this post received over 33 million views by May 2019. As of May 2020, it had received over 41 million views. On 16 July 2019, Chris Godfrey (the creator of the account) was listed as one of the top 25 most influential people on the internet. On 20 December 2022, the record for the most-liked Instagram post was surpassed by a post from Argentine footballer Lionel Messi, showing him and his teammates celebrating after winning the 2022 FIFA World Cup with their national team. The world record egg responded to being overtaken in likes by Messi with "Today [Lionel Messi] has taken the crown, for now. But I'm still left with one question… Who is the greatest of all time – Cristiano Ronaldo or Leo Messi?" The account sold to Dubai-based investor Mustafa El Fishawy in April 2024 for an undisclosed seven-figure sum. Reed Smith, who advised Godfrey, Brown, and Khan-Whelan in the transaction, stated they opted to sell it to "focus on new ventures." On 3 June, @world_record_egg posted an egg with the flag of Palestine in support of the country during the Gaza war; the post's caption described it as an "Egg for Peace" and hoped to "set a new world record together and get the most liked post on Instagram for a good cause." == Reception == In response to breaking the world record for the most-liked Instagram post, the account's owner wrote "This is madness. What a time to be alive." Hours later, Jenner posted a video on Instagram of her cracking open an egg and pouring its yolk onto the ground, with the caption: "Take that little egg." Pundits pontificated on the meaning of the egg picture's dominance over social media's "first family". As Vogue observed, tapping a heart pictogram is easy, and eggs are "lovable". More pointedly: [T]he attention economy is a scam based on requiring little to no labor from both producer and consumer despite commanding the most space, and therefore value, in our digital lives... but it very well could be: As a metaphor for the fragility of the influencer ecosystem, the egg has broken the Internet. The significance of the event and its massive republishing are a topic of discussion. A University of Westminster researcher of internet memes compared it to the movement to name a scientific research vessel in the United Kingdom as Boaty McBoatface. The Instagrammer's success is a rare victory for the unpaid viral campaign on social media. "There is a bit of an anti-celebrity revolt here – 'look what we can do with a simple egg'" The researcher suggests that the accomplishment of becoming such a widely heralded unpaid viral post may become increasingly rare, as social networks rely more on paid and business promotion. The post's spread has been characterized as a populist backlash against "consumerism" and is seen by some as a triumph of community over celebrity. However, propelled by their popular success, the creators promised to release 'egg-centric' memorabilia. Hundreds of games based on the Instagram egg have appeared on Apple's App Store. The creators of the Instagram egg also reached a deal to promote Hulu.

  Read more →
• 

  Data lake

  A data lake is a system or repository of data stored in its natural/raw format, usually object blobs or files. A data lake is usually a single store of data including raw copies of source system data, sensor data, social data etc., and transformed data used for tasks such as reporting, visualization, advanced analytics, and machine learning. A data lake can include structured data from relational databases (rows and columns), semi-structured data (CSV, logs, XML, JSON), unstructured data (emails, documents, PDFs), and binary data (images, audio, video). A data lake can be established on premises (within an organization's data centers) or in the cloud (using cloud services). == Background == James Dixon, then chief technology officer at Pentaho, coined the term by 2011 to contrast it with data mart, which is a smaller repository of interesting attributes derived from raw data. In promoting data lakes, he argued that data marts have several inherent problems, such as information siloing. PricewaterhouseCoopers (PwC) said that data lakes could "put an end to data silos". In their study on data lakes, they noted that enterprises were "starting to extract and place data for analytics into a single, Hadoop-based repository." == Examples == Many companies use cloud storage services such as Google Cloud Storage and Amazon S3 or a distributed file system such as Apache Hadoop distributed file system (HDFS). There is a gradual academic interest in the concept of data lakes. For example, Personal DataLake at Cardiff University is a new type of data lake which aims at managing big data of individual users by providing a single point of collecting, organizing, and sharing personal data. Early data lakes, such as Hadoop 1.0, had limited capabilities because it only supported batch-oriented processing (Map Reduce). Interacting with it required expertise in Java, map reduce and higher-level tools like Apache Pig, Apache Spark and Apache Hive (which were also originally batch-oriented). == Criticism == Poorly managed data lakes have been facetiously called data swamps. In June 2015, David Needle characterized "so-called data lakes" as "one of the more controversial ways to manage big data". PwC was also careful to note in their research that not all data lake initiatives are successful. They quote Sean Martin, CTO of Cambridge Semantics: We see customers creating big data graveyards, dumping everything into Hadoop distributed file system (HDFS) and hoping to do something with it down the road. But then they just lose track of what’s there. The main challenge is not creating a data lake, but taking advantage of the opportunities it presents. They describe companies that build successful data lakes as gradually maturing their lake as they figure out which data and metadata are important to the organization. Another criticism is that the term data lake is used with many different meanings. It may be used to refer to, for example: any tools or data management practices that are not data warehouses; a particular technology for implementation; a raw data reservoir; a hub for ETL offload; or a central hub for self-service analytics. While critiques of data lakes are warranted, in many cases they apply to other data projects as well. For example, the definition of data warehouse is also changeable, and not all data warehouse efforts have been successful. In response to various critiques, McKinsey noted that the data lake should be viewed as a service model for delivering business value within the enterprise, not a technology outcome. == Data lakehouses == Data lakehouses are a hybrid approach that can ingest a variety of raw data formats like a data lake, while also providing ACID transactions and enforced data quality like a data warehouse.

  Read more →
• 

  Sumazi

  Sumazi is a social media and social intelligence platform for enterprises, brands, and celebrities. Its technology performs social data analysis across social networking services including Facebook, Twitter and LinkedIn, to identify key people in his/her network who are experts, influencers or are located in a specific area for marketing, advertising or sales campaigns. The technology company was founded in 2011 by former Sun Microsystems employee Sumaya Kazi. The company was headquartered in San Francisco, California. The company was out of business by 2017. == Reception == Sumazi was one of 25 startups selected out of more than 1,200 to compete at TechCrunch Disrupt Startup Battlefield, where it won the Omidyar Network award for the startup "Most Likely to Change the World." Sumazi, which was based out of San Francisco, California, had been profiled in The New York Times as well as USA Today, which commented the advantages of the startup's location in the Silicon Valley. American Express OPEN Forum also featured Sumazi as a "Startup of the Week". Sumazi has additionally been mentioned in articles by Mashable, The Wall Street Journal, Current Editorials, Harvard Business Review, Smashing Magazine, and TechCrunch.

  Read more →
• 

  Color quantization

  In computer graphics, color quantization or color image quantization is quantization applied to color spaces; it is a process that reduces the number of distinct colors used in an image, usually with the intention that the new image should be as visually similar as possible to the original image. Computer algorithms to perform color quantization on bitmaps have been studied since the 1970s. Color quantization is critical for displaying images with many colors on devices that can only display a limited number of colors, usually due to memory limitations, and enables efficient compression of certain types of images. The name "color quantization" is primarily used in computer graphics research literature; in applications, terms such as optimized palette generation, optimal palette generation, or decreasing color depth are used. Some of these are misleading, as the palettes generated by standard algorithms are not necessarily the best possible. == Algorithms == Most standard techniques treat color quantization as a problem of clustering points in three-dimensional space, where the points represent colors found in the original image and the three axes represent the three color channels. Almost any three-dimensional clustering algorithm can be applied to color quantization, and vice versa. After the clusters are located, typically the points in each cluster are averaged to obtain the representative color that all colors in that cluster are mapped to. The three color channels are usually red, green, and blue, but another popular choice is the Lab color space, in which Euclidean distance is more consistent with perceptual difference. The most popular algorithm by far for color quantization, invented by Paul Heckbert in 1979, is the median cut algorithm. Many variations on this scheme are in use. Before this time, most color quantization was done using the population algorithm or population method, which essentially constructs a histogram of equal-sized ranges and assigns colors to the ranges containing the most points. A more modern popular method is clustering using octrees, first conceived by Gervautz and Purgathofer and improved by Xerox PARC researcher Dan Bloomberg. If the palette is fixed, as is often the case in real-time color quantization systems such as those used in operating systems, color quantization is usually done using the "straight-line distance" or "nearest color" algorithm, which simply takes each color in the original image and finds the closest palette entry, where distance is determined by the distance between the two corresponding points in three-dimensional space. In other words, if the colors are ( r 1 , g 1 , b 1 ) {\displaystyle (r_{1},g_{1},b_{1})} and ( r 2 , g 2 , b 2 ) {\displaystyle (r_{2},g_{2},b_{2})} , we want to minimize the Euclidean distance: ( r 1 − r 2 ) 2 + ( g 1 − g 2 ) 2 + ( b 1 − b 2 ) 2 . {\displaystyle {\sqrt {(r_{1}-r_{2})^{2}+(g_{1}-g_{2})^{2}+(b_{1}-b_{2})^{2}}}.} This effectively decomposes the color cube into a Voronoi diagram, where the palette entries are the points and a cell contains all colors mapping to a single palette entry. There are efficient algorithms from computational geometry for computing Voronoi diagrams and determining which region a given point falls in; in practice, indexed palettes are so small that these are usually overkill. Color quantization is frequently combined with dithering, which can eliminate unpleasant artifacts such as banding that appear when quantizing smooth gradients and give the appearance of a larger number of colors. Some modern schemes for color quantization attempt to combine palette selection with dithering in one stage, rather than perform them independently. A number of other much less frequently used methods have been invented that use entirely different approaches. The Local K-means algorithm, conceived by Oleg Verevka in 1995, is designed for use in windowing systems where a core set of "reserved colors" is fixed for use by the system and many images with different color schemes might be displayed simultaneously. It is a post-clustering scheme that makes an initial guess at the palette and then iteratively refines it. In the early days of color quantization, the k-means clustering algorithm was deemed unsuitable because of its high computational requirements and sensitivity to initialization. In 2011, M. Emre Celebi reinvestigated the performance of k-means as a color quantizer. He demonstrated that an efficient implementation of k-means outperforms a large number of color quantization methods. The high-quality but slow NeuQuant algorithm reduces images to 256 colors by training a Kohonen neural network "which self-organises through learning to match the distribution of colours in an input image. Taking the position in RGB-space of each neuron gives a high-quality colour map in which adjacent colours are similar." It is particularly advantageous for images with gradients. Finally, one of the newer methods is spatial color quantization, conceived by Puzicha, Held, Ketterer, Buhmann, and Fellner of the University of Bonn, which combines dithering with palette generation and a simplified model of human perception to produce visually impressive results even for very small numbers of colors. It does not treat palette selection strictly as a clustering problem, in that the colors of nearby pixels in the original image also affect the color of a pixel. See sample images. == History and applications == In the early days of PCs, it was common for video adapters to support only 2, 4, 16, or (eventually) 256 colors due to video memory limitations; they preferred to dedicate the video memory to having more pixels (higher resolution) rather than more colors. Color quantization helped to justify this tradeoff by making it possible to display many high color images in 16- and 256-color modes with limited visual degradation. Many operating systems automatically perform quantization and dithering when viewing high color images in a 256 color video mode, which was important when video devices limited to 256 color modes were dominant. Modern computers can now display millions of colors at once, far more than can be distinguished by the human eye, limiting this application primarily to mobile devices and legacy hardware. Nowadays, color quantization is mainly used in GIF and PNG images. GIF, for a long time the most popular lossless and animated bitmap format on the World Wide Web, only supports up to 256 colors, necessitating quantization for many images. Some early web browsers constrained images to use a specific palette known as the web colors, leading to severe degradation in quality compared to optimized palettes. PNG images support 24-bit color, but can often be made much smaller in filesize without much visual degradation by application of color quantization, since PNG files use fewer bits per pixel for palettized images. The infinite number of colors available through the lens of a camera is impossible to display on a computer screen; thus converting any photograph to a digital representation necessarily involves some quantization. Practically speaking, 24-bit color is sufficiently rich to represent almost all colors perceivable by humans with sufficiently small error as to be visually identical (if presented faithfully), within the available color space. However, the digitization of color, either in a camera detector or on a screen, necessarily limits the available color space. Consequently there are many colors that may be impossible to reproduce, regardless of how many bits are used to represent the color. For example, it is impossible in typical RGB color spaces (common on computer monitors) to reproduce the full range of green colors that the human eye is capable of perceiving. With the few colors available on early computers, different quantization algorithms produced very different-looking output images. As a result, a lot of time was spent on writing sophisticated algorithms to be more lifelike. === Quantization for image compression === Many image file formats support indexed color. A whole-image palette typically selects 256 "representative" colors for the entire image, where each pixel references any one of the colors in the palette, as in the GIF and PNG file formats. A block palette typically selects 2 or 4 colors for each block of 4x4 pixels, used in BTC, CCC, S2TC, and S3TC. === Editor support === Many bitmap graphics editors contain built-in support for color quantization, and will automatically perform it when converting an image with many colors to an image format with fewer colors. Most of these implementations allow the user to set exactly the number of desired colors. Examples of such support include: Photoshop's Mode→Indexed Color function supplies a number of quantization algorithms ranging from the fixed Windows system and Web palettes to the proprietary Local and Global algorithms for generating palettes suited to a particu

  Read more →
• 

  Malleability (cryptography)

  Malleability is a property of some cryptographic algorithms. An encryption algorithm is said to be malleable if it is possible to transform a ciphertext into another ciphertext which decrypts to a related plaintext. That is, given an encryption of a plaintext m {\displaystyle m} , it is possible to generate another ciphertext which decrypts to f ( m ) {\displaystyle f(m)} , for a known function f {\displaystyle f} , without necessarily knowing or learning m {\displaystyle m} . Malleability is often an undesirable property in a general-purpose cryptosystem, since it allows an attacker to modify the contents of a message. For example, suppose that a bank uses a stream cipher to hide its financial information, and a user sends an encrypted message containing, say, "TRANSFER $0000100.00 TO ACCOUNT #199." If an attacker can modify the message on the wire, and can guess the format of the unencrypted message, the attacker could change the amount of the transaction, or the recipient of the funds, e.g. "TRANSFER $0100000.00 TO ACCOUNT #227". Malleability does not refer to the attacker's ability to read the encrypted message. Both before and after tampering, the attacker cannot read the encrypted message. On the other hand, some cryptosystems are malleable by design. In other words, in some circumstances it may be viewed as a feature that anyone can transform an encryption of m {\displaystyle m} into a valid encryption of f ( m ) {\displaystyle f(m)} (for some restricted class of functions f {\displaystyle f} ) without necessarily learning m {\displaystyle m} . Such schemes are known as homomorphic encryption schemes. A cryptosystem may be semantically secure against chosen-plaintext attacks or even non-adaptive chosen-ciphertext attacks (CCA1) while still being malleable. However, security against adaptive chosen-ciphertext attacks (CCA2) is equivalent to non-malleability. == Example malleable cryptosystems == In a stream cipher, the ciphertext is produced by taking the exclusive or of the plaintext and a pseudorandom stream based on a secret key k {\displaystyle k} , as E ( m ) = m ⊕ S ( k ) {\displaystyle E(m)=m\oplus S(k)} . An adversary can construct an encryption of m ⊕ t {\displaystyle m\oplus t} for any t {\displaystyle t} , as E ( m ) ⊕ t = m ⊕ t ⊕ S ( k ) = E ( m ⊕ t ) {\displaystyle E(m)\oplus t=m\oplus t\oplus S(k)=E(m\oplus t)} . In the RSA cryptosystem, a plaintext m {\displaystyle m} is encrypted as E ( m ) = m e mod n {\displaystyle E(m)=m^{e}{\bmod {n}}} , where ( e , n ) {\displaystyle (e,n)} is the public key. Given such a ciphertext, an adversary can construct an encryption of m t {\displaystyle mt} for any t {\displaystyle t} , as E ( m ) ⋅ t e mod n = ( m t ) e mod n = E ( m t ) {\textstyle E(m)\cdot t^{e}{\bmod {n}}=(mt)^{e}{\bmod {n}}=E(mt)} . For this reason, RSA is commonly used together with padding methods such as OAEP or PKCS1. In the ElGamal cryptosystem, a plaintext m {\displaystyle m} is encrypted as E ( m ) = ( g b , m A b ) {\displaystyle E(m)=(g^{b},mA^{b})} , where ( g , A ) {\displaystyle (g,A)} is the public key. Given such a ciphertext ( c 1 , c 2 ) {\displaystyle (c_{1},c_{2})} , an adversary can compute ( c 1 , t ⋅ c 2 ) {\displaystyle (c_{1},t\cdot c_{2})} , which is a valid encryption of t m {\displaystyle tm} , for any t {\displaystyle t} . In contrast, the Cramer-Shoup system (which is based on ElGamal) is not malleable. In the Paillier, ElGamal, and RSA cryptosystems, it is also possible to combine several ciphertexts together in a useful way to produce a related ciphertext. In Paillier, given only the public key and an encryption of m 1 {\displaystyle m_{1}} and m 2 {\displaystyle m_{2}} , one can compute a valid encryption of their sum m 1 + m 2 {\displaystyle m_{1}+m_{2}} . In ElGamal and in RSA, one can combine encryptions of m 1 {\displaystyle m_{1}} and m 2 {\displaystyle m_{2}} to obtain a valid encryption of their product m 1 m 2 {\displaystyle m_{1}m_{2}} . Block ciphers in the cipher block chaining mode of operation, for example, are partly malleable: flipping a bit in a ciphertext block will completely mangle the plaintext it decrypts to, but will result in the same bit being flipped in the plaintext of the next block. This allows an attacker to 'sacrifice' one block of plaintext in order to change some data in the next one, possibly managing to maliciously alter the message. This is essentially the core idea of the padding oracle attack on CBC, which allows the attacker to decrypt almost an entire ciphertext without knowing the key. For this and many other reasons, a message authentication code is required to guard against any method of tampering. == Complete non-malleability == Fischlin, in 2005, defined the notion of complete non-malleability as the ability of the system to remain non-malleable while giving the adversary additional power to choose a new public key which could be a function of the original public key. In other words, the adversary shouldn't be able to come up with a ciphertext whose underlying plaintext is related to the original message through a relation that also takes public keys into account.

  Read more →
• 

  KLJN Secure Key Exchange

  Random-resistor-random-temperature Kirchhoff-law-Johnson-noise key exchange, also known as RRRT-KLJN or simply KLJN, is an approach for distributing cryptographic keys between two parties that claims to offer unconditional security. This claim, which has been contested, is significant, as the only other key exchange approach claiming to offer unconditional security is Quantum key distribution. The KLJN secure key exchange scheme was proposed in 2005 by Laszlo Kish and Granqvist. It has the advantage over quantum key distribution in that it can be performed over a metallic wire with just four resistors, two noise generators, and four voltage measuring devices---equipment that is low-priced and can be readily manufactured. It has the disadvantage that several attacks against KLJN have been identified which must be defended against. "Given that the amount of effort and funding that goes into Quantum Cryptography is substantial (some even mock it as a distraction from the ultimate prize which is quantum computing), it seems to me that the fact that classic thermodynamic resources allow for similar inherent security should give one pause," wrote Henning Dekant, the founder of the Quantum Computing Meetup, in April 2013. The Cybersecurity Curricula 2017, a joint project of the Association for Computing Machinery, the IEEE Computer Society, the Association for Information Systems, and the International Federation for Information Processing Technical Committee on Information Security Education (IFIP WG 11.8) recommends teaching the KLJN Scheme as part of teaching "Advanced concepts" in its knowledge unit on cryptography. == See Also/Further Reading ==

  Read more →
• 

  AS1 (networking)

  AS1 (Applicability Statement 1) is a specification about how to transport structured business-to-business data securely and reliably over the Internet. Security is achieved by using digital certificates and encryption. == AS1 technical overview == The AS1 protocol is based on SMTP and S/MIME. It was the first AS protocol developed and uses signing, encryption and MDN conventions. In other words: Files are sent as "attachments" in a specially coded SMIME email message Messages can be signed, but do not have to be Messages can be encrypted, but do not have to be Messages may request an MDN back if all went well, but do not have to request such a message If the original AS1 message requested an MDN... Upon the receipt of the message and its successful decryption or signature validation (as necessary) a "success" MDN will be sent back to the original sender. This MDN is typically signed but not encrypted. Upon the receipt and successful verification of the signature on the MDN, the original sender will "know" that the recipient got their message (this provides the "Non-repudiation" element of AS1) If there are any problems receiving or interpreting the original AS1 message, a "failed" MDN may be sent back. Like any other AS file transfer, AS1 file transfers typically require both sides of the exchange to trade X.509 certificates and specific "trading partner" names before any transfers can take place.

  Read more →
• 

  Geometric primitive

  In vector computer graphics, CAD systems, and geographic information systems, a geometric primitive (or prim) is the simplest (i.e. 'atomic' or irreducible) geometric shape that the system can handle (draw, store). Sometimes the subroutines that draw the corresponding objects are called "geometric primitives" as well. The most "primitive" primitives are point and straight line segments, which were all that early vector graphics systems had. In constructive solid geometry, primitives are simple geometric shapes such as a cube, cylinder, sphere, cone, pyramid, torus. Modern 2D computer graphics systems may operate with primitives which are curves (segments of straight lines, circles and more complicated curves), as well as shapes (boxes, arbitrary polygons, circles). A common set of two-dimensional primitives includes lines, points, and polygons, although some people prefer to consider triangles primitives, because every polygon can be constructed from triangles (polygon triangulation). All other graphic elements are built up from these primitives. In three dimensions, triangles or polygons positioned in three-dimensional space can be used as primitives to model more complex 3D forms. In some cases, curves (such as Bézier curves, circles, etc.) may be considered primitives; in other cases, curves are complex forms created from many straight, primitive shapes. == Common primitives == The set of geometric primitives is based on the dimension of the region being represented: Point (0-dimensional), a single location with no height, width, or depth. Line or curve (1-dimensional), having length but no width, although a linear feature may curve through a higher-dimensional space. Planar surface or curved surface (2-dimensional), having length and width. Volumetric region or solid (3-dimensional), having length, width, and depth. In GIS, the terrain surface is often spoken of colloquially as "2 1/2 dimensional," because only the upper surface needs to be represented. Thus, elevation can be conceptualized as a scalar field property or function of two-dimensional space, affording it a number of data modeling efficiencies over true 3-dimensional objects. A shape of any of these dimensions greater than zero consists of an infinite number of distinct points. Because digital systems are finite, only a sample set of the points in a shape can be stored. Thus, vector data structures typically represent geometric primitives using a strategic sample, organized in structures that facilitate the software interpolating the remainder of the shape at the time of analysis or display, using the algorithms of Computational geometry. A Point is a single coordinate in a Cartesian coordinate system. Some data models allow for Multipoint features consisting of several disconnected points. A Polygonal chain or Polyline is an ordered list of points (termed vertices in this context). The software is expected to interpolate the intervening shape of the line between adjacent points in the list as a parametric curve, most commonly a straight line, but other types of curves are frequently available, including circular arcs, cubic splines, and Bézier curves. Some of these curves require additional points to be defined that are not on the line itself, but are used for parametric control. A Polygon is a polyline that closes at its endpoints, representing the boundary of a two-dimensional region. The software is expected to use this boundary to partition 2-dimensional space into an interior and exterior. Some data models allow for a single feature to consist of multiple polylines, which could collectively connect to form a single closed boundary, could represent a set of disjoint regions (e.g., the state of Hawaii), or could represent a region with holes (e.g., a lake with an island). A Parametric shape is a standardized two-dimensional or three-dimensional shape defined by a minimal set of parameters, such as an ellipse defined by two points at its foci, or three points at its center, vertex, and co-vertex. A Polyhedron or Polygon mesh is a set of polygon faces in three-dimensional space that are connected at their edges to completely enclose a volumetric region. In some applications, closure may not be required or may be implied, such as modeling terrain. The software is expected to use this surface to partition 3-dimensional space into an interior and exterior. A triangle mesh is a subtype of polyhedron in which all faces must be triangles, the only polygon that will always be planar, including the Triangulated irregular network (TIN) commonly used in GIS. A parametric mesh represents a three-dimensional surface by a connected set of parametric functions, similar to a spline or Bézier curve in two dimensions. The most common structure is the Non-uniform rational B-spline (NURBS), supported by most CAD and animation software. == Application in GIS == A wide variety of vector data structures and formats have been developed during the history of Geographic information systems, but they share a fundamental basis of storing a core set of geometric primitives to represent the location and extent of geographic phenomena. Locations of points are almost always measured within a standard Earth-based coordinate system, whether the spherical Geographic coordinate system (latitude/longitude), or a planar coordinate system, such as the Universal Transverse Mercator. They also share the need to store a set of attributes of each geographic feature alongside its shape; traditionally, this has been accomplished using the data models, data formats, and even software of relational databases. Early vector formats, such as POLYVRT, the ARC/INFO Coverage, and the Esri shapefile support a basic set of geometric primitives: points, polylines, and polygons, only in two dimensional space and the latter two with only straight line interpolation. TIN data structures for representing terrain surfaces as triangle meshes were also added. Since the mid 1990s, new formats have been developed that extend the range of available primitives, generally standardized by the Open Geospatial Consortium's Simple Features specification. Common geometric primitive extensions include: three-dimensional coordinates for points, lines, and polygons; a fourth "dimension" to represent a measured attribute or time; curved segments in lines and polygons; text annotation as a form of geometry; and polygon meshes for three-dimensional objects. Frequently, a representation of the shape of a real-world phenomenon may have a different (usually lower) dimension than the phenomenon being represented. For example, a city (a two-dimensional region) may be represented as a point, or a road (a three-dimensional volume of material) may be represented as a line. This dimensional generalization correlates with tendencies in spatial cognition. For example, asking the distance between two cities presumes a conceptual model of the cities as points, while giving directions involving travel "up," "down," or "along" a road imply a one-dimensional conceptual model. This is frequently done for purposes of data efficiency, visual simplicity, or cognitive efficiency, and is acceptable if the distinction between the representation and the represented is understood, but can cause confusion if information users assume that the digital shape is a perfect representation of reality (i.e., believing that roads really are lines). == In 3D modelling == In CAD software or 3D modelling, the interface may present the user with the ability to create primitives which may be further modified by edits. For example, in the practice of box modelling the user will start with a cuboid, then use extrusion and other operations to create the model. In this use the primitive is just a convenient starting point, rather than the fundamental unit of modelling. A 3D package may also include a list of extended primitives which are more complex shapes that come with the package. For example, a teapot is listed as a primitive in 3D Studio Max. == In graphics hardware == Various graphics accelerators exist with hardware acceleration for rendering specific primitives such as lines or triangles, frequently with texture mapping and shaders. Modern 3D accelerators typically accept sequences of triangles as triangle strips.

  Read more →
• 

  Virtual collective consciousness

  Virtual collective consciousness (VCC) is a term rebooted and promoted by two behavioral scientists, Yousri Marzouki and Olivier Oullier in their 2012 Huffington Post article titled: "Revolutionizing Revolutions: Virtual Collective Consciousness and the Arab Spring", after its first appearance in 1999-2000. VCC is now defined as an internal knowledge catalyzed by social media platforms and shared by a plurality of individuals driven by the spontaneity, the homogeneity, and the synchronicity of their online actions. VCC occurs when a large group of persons, brought together by a social media platform think and act with one mind and share collective emotions. Thus, they are able to coordinate their efforts efficiently, and could rapidly spread their word to a worldwide audience. When interviewed about the concept of VCC that appeared in the book - Hyperconnectivity and the Future of Internet Communication - he edited, Professor of Pervasive Computing, Adrian David Cheok mentioned the following: "The idea of a global (collective) virtual consciousness is a bottom-up process and a rather emergent property resulting from a momentum of complex interactions taking place in social networks. This kind of collective behaviour (or intelligence) results from a collision between a physical world and a virtual world and can have a real impact in our life by driving collective action." == Etymology == In 1999-2000, Richard Glen Boire provided a cursory mention and the only occurrence of the term "Virtual collective consciousness" in his text as follows: The trend of technology is to overcome the limitations of the human body. And, the Web has been characterized as a virtual collective consciousness and unconsciousness The recent definition of VCC evolved from the first empirical study that provided a cyberpsychological insight into the contribution of Facebook to the 2011 Tunisian revolution. In this study, the concept was originally called "collective cyberconsciousness". The latter is an extension of the idea of "collective consciousness" coupled with "citizen media" usage. The authors of this study also made a parallel between this original definition of VCC and other comparable concepts such as Durkheim's collective representation, Žižek's "collective mind" or Boguta's "new collective consciousness" that he used to describe the computational history of the Internet shutdown during the Egyptian revolution. Since VCC is the byproduct of the network's successful actions, then these actions must be timely, acute, rapid, domain-specific, and purpose-oriented to successfully achieve their goal. Before reaching a momentum of complexity, each collective behavior starts by a spark that triggers a chain of events leading to a crystallized stance of a tremendous amount of interactions. Thus, VCC is an emergent global pattern from these individual actions. In 2012, the term virtual collective consciousness resurfaced and was brought to light after extending its applications to the Egyptian case and the whole social networking major impact on the success of the so-called Arab Spring. Moreover, the acronym VCC was suggested to identify the theoretical framework covering on-line behaviors leading to a virtual collective consciousness. Hence, online social networks have provided a new and faster way of establishing or modifying "collective consciousness" that was paramount to the 2011 uprisings in the Arab world. == Theoretical underpinnings of VCC == Various theoretical references in fields ranging from sociology to computer science were mentioned in order to account for the key features that render the framework for a virtual collective consciousness. The following list is not exhaustive, but the references it contains are often highlighted: Émile Durkheim's collective representations are at the heart of VCC since collectivity taken decisions according to Durkheim's assumptions will approve or disapprove individuals' actions and help them eventually reach their final goal. Marshall McLuhan's global village: The shrinking of our big world to a small place called cyberspace is made possible by technological extensions of human consciousness. Carl Jung's collective unconscious: When a society witnesses significant changes, the anchoring of archetypal images (e.g., political leaders) seems to be deeply rooted in individuals' collective unconscious that is likely to bias their political choices. Individual memories of public events were also supposed to convey a "collective awareness" that can be subconsciously altered by the instantaneous spread of information through social networking around the world. Daniel Wegner's transactive memory (TM): social-networking platforms such as Facebook during the Tunisian revolution or Twitter during the Egyptian revolution served as placeholders of a VCC where information can be harnessed and steered to the highly specific revolutionary purpose. Although research on TM was originally limited to couples, small groups, and organizations, recent studies strongly suggest that an effective TM can operate on a very large scale too. James Surowiecki's wisdom of crowds Collective influence algorithm: The CI (Collective influence) algorithm is effective in finding influential nodes in a variety of networks, including social networks, communication networks, and biological networks. It has been used to identify influencers on social-media platforms, to identify key nodes in transportation networks, and to identify potential drug-targets in biological networks. == Some illustrations of VCC == Besides the studied effect of social networking on the Tunisian and Egyptian revolutions, the former via Facebook and the latter via Twitter other applications were studied under the prism of VCC framework: The Whitacre's virtual choir: A compelling example of the degree of autonomy and self-identity members of a spontaneously created network through a VCC is Eric Whitacre's unique musical project that involved a collection of singers performing remotely to create a virtual Choir. The effect of all the voices illustrated a genuine virtual collective empathy merging the artist's mind with all the singers through his silent conducting gestures. The Harlem Shake dance: The Bitcoin protocol: It was questioned whether or not the Bitcoin protocol can morph into virtual collective consciousness. The Byzantine generals problem was used as an analogy to understand the behavioral complexity of the community of Bitcoin's users. Artificial Social Networking Intelligence (ASNI): refers to the application of artificial intelligence within social networking services and social media platforms. It encompasses various technologies and techniques used to automate, personalize, enhance, improve, and synchronize users' interactions and experiences within social networks. ASNI is expected to evolve rapidly, influencing how we interact online and shaping our digital experiences. Transparency, ethical considerations, media influence bias, and user control over data will be crucial to ensure responsible development and positive impact.

  Read more →
• 

  Data profiling

  Data profiling is the process of examining the data available from an existing information source (e.g. a database or a file) and collecting statistics or informative summaries about that data. The purpose of these statistics may be to: Find out whether existing data can be easily used for other purposes Improve the ability to search data by tagging it with keywords, descriptions, or assigning it to a category Assess data quality, including whether the data conforms to particular standards or patterns Assess the risk involved in integrating data in new applications, including the challenges of joins Discover metadata of the source database, including value patterns and distributions, key candidates, foreign-key candidates, and functional dependencies Assess whether known metadata accurately describes the actual values in the source database Understanding data challenges early in any data intensive project, so that late project surprises are avoided. Finding data problems late in the project can lead to delays and cost overruns. Have an enterprise view of all data, for uses such as master data management, where key data is needed, or data governance for improving data quality. == Introduction == Data profiling refers to the analysis of information for use in a data warehouse in order to clarify the structure, content, relationships, and derivation rules of the data. Profiling helps to not only understand anomalies and assess data quality, but also to discover, register, and assess enterprise metadata. The result of the analysis is used to determine the suitability of the candidate source systems, usually giving the basis for an early go/no-go decision, and also to identify problems for later solution design. == How data profiling is conducted == Data profiling utilizes methods of descriptive statistics such as minimum, maximum, mean, mode, percentile, standard deviation, frequency, variation, aggregates such as count and sum, and additional metadata information obtained during data profiling such as data type, length, discrete values, uniqueness, occurrence of null values, typical string patterns, and abstract type recognition. The metadata can then be used to discover problems such as illegal values, misspellings, missing values, varying value representation, and duplicates. Different analyses are performed for different structural levels. E.g. single columns could be profiled individually to get an understanding of frequency distribution of different values, type, and use of each column. Embedded value dependencies can be exposed in a cross-columns analysis. Finally, overlapping value sets possibly representing foreign key relationships between entities can be explored in an inter-table analysis. Normally, purpose-built tools are used for data profiling to ease the process. The computational complexity increases when going from single column, to single table, to cross-table structural profiling. Therefore, performance is an evaluation criterion for profiling tools. == When is data profiling conducted? == According to Kimball, data profiling is performed several times and with varying intensity throughout the data warehouse developing process. A light profiling assessment should be undertaken immediately after candidate source systems have been identified and DW/BI business requirements have been satisfied. The purpose of this initial analysis is to clarify at an early stage if the correct data is available at the appropriate detail level and that anomalies can be handled subsequently. If this is not the case the project may be terminated. Additionally, more in-depth profiling is done prior to the dimensional modeling process in order assess what is required to convert data into a dimensional model. Detailed profiling extends into the ETL system design process in order to determine the appropriate data to extract and which filters to apply to the data set. Additionally, data profiling may be conducted in the data warehouse development process after data has been loaded into staging, the data marts, etc. Conducting data at these stages helps ensure that data cleaning and transformations have been done correctly and in compliance of requirements. == Benefits and examples == Data profiling can improve data quality, shorten the implementation cycle of major projects, and improve users' understanding of data. Discovering business knowledge embedded in data itself is one of the significant benefits derived from data profiling. It can improve data accuracy in corporate databases.

  Read more →
• 

  Death of Molly Russell

  In November 2017, Molly Russell, a fourteen-year-old British schoolgirl from Harrow, London, was found dead in her bedroom by her parents. In an inquest, the coroner stated that she had died from an act of self-harm following depression and the results of social media consumption, including material on Instagram and Pinterest. She also had a Twitter account in which she documented her growing depression. == Life == Russell had been a pupil at Hatch End High School. At the inquest, the school's head teacher expressed shock that she was able to access distressing online content. Her parents stated that she had never shown any previous signs of struggle and was doing very well in school. It was revealed at the inquest that in the six months prior to her death, 2,100 of 16,300 pieces of content she had interacted with on Instagram were on topics such as self-harm, depression, and suicide. It was also noted that throughout her experience on social media, there were never any warning signs about the information she viewed on these platforms. == Subsequent events == Dr. Navin Venugopal, the child psychiatrist assigned to the case investigating her death, called the material she viewed "disturbing and distressing" and said he was unable to sleep well for weeks after viewing it. The coroner Andrew Walker concluded that Molly's death was "an act of self harm suffering from depression and the negative effects of online content". He issued a prevention of future deaths report regarding her death, in which he made a number of recommendations for operators of online platforms, including: separating platforms for adults and children age verification changes in policy on filtering of age-specific content adding features for parental supervision and control data retention of material viewed by children He suggested that this could be accomplished by either legislation or self-regulation. The lawyer representing her family at the inquest stated that the findings "captured all of the elements of why this material is so harmful." The case has been cited as a motivator for the passage of the Online Safety Act. A charity, the Molly Rose Foundation, was set up in her memory, with the goal of suicide prevention for young people. Meta and Pinterest are believed to have made substantial donations to the charity.

  Read more →
• 

  Behavior informatics

  Behavior informatics (BI) is the informatics of behaviors so as to obtain behavior intelligence and behavior insights. BI is a research method combining science and technology, specifically in the area of engineering. The purpose of BI includes analysis of current behaviors as well as the inference of future possible behaviors. This occurs through pattern recognition. Different from applied behavior analysis from the psychological perspective, BI builds computational theories, systems and tools to qualitatively and quantitatively model, represent, analyze, and manage behaviors of individuals, groups and/or organizations. BI is built on classic study of behavioral science, including behavior modeling, applied behavior analysis, behavior analysis, behavioral economics, and organizational behavior. Typical BI tasks consist of individual and group behavior formation, representation, computational modeling, analysis, learning, simulation, and understanding of behavior impact, utility, non-occurring behaviors, etc. for behavior intervention and management. The Behavior Informatics approach to data utilizes cognitive as well as behavioral data. By combining the data, BI has the potential to effectively illustrate the big picture when it comes to behavioral decisions and patterns. One of the goals of BI is also to be able to study human behavior while eliminating issues like self-report bias. This creates more reliable and valid information for research studies. == Behavior == From an Informatics perspective, a behavior consists of three key elements: actors (behavioral subjects and objects), operations (actions, activities) and interactions (relationships), and their properties. A behavior can be represented as a behavior vector, all behaviors of an actor or an actor group can be represented as behavior sequences and multi-dimensional behavior matrix. The following table explains some of the elements of behavior. Behavior Informatics takes into account behavior when analyzing business patterns and intelligence. The inclusion of behavior in these analyses provides prominent information on social and driving factors of patterns. == Applications == Behavior Informatics is being used in a variety of settings, including but not limited to health care management, telecommunications, marketing, and security. Behavior Informatics provides a manner in which to analyze and organize the many aspects that go into a person's health care needs and decisions. When it comes to business models, behavior informatics may be utilized for a similar role. Organizations implement behavior informatics to enhance business structure and regime, where it helps moderate ideal business decisions and situations.

  Read more →
• 

  Data transformation (computing)

  In computing, data transformation is the process of converting data from one format or structure into another format or structure. It is a fundamental aspect of most data integration and data management tasks such as data wrangling, data warehousing, data integration and application integration. Data transformation can be simple or complex based on the required changes to the data between the source (initial) data and the target (final) data. Data transformation is typically performed via a mixture of manual and automated steps. Tools and technologies used for data transformation can vary widely based on the format, structure, complexity, and volume of the data being transformed. A master data recast is another form of data transformation where the entire database of data values is transformed or recast without extracting the data from the database. All data in a well-designed database is directly or indirectly related to a limited set of master database tables by a network of foreign key constraints. Each foreign key constraint is dependent upon a unique database index from the parent database table. Therefore, when the proper master database table is recast with a different unique index, the directly and indirectly related data are also recast or restated. The directly and indirectly related data may also still be viewed in the original form since the original unique index still exists with the master data. Also, the database recast must be done in such a way as to not impact the applications architecture software. When the data mapping is indirect via a mediating data model, the process is also called data mediation. == Data transformation process == Data transformation can be divided into the following steps, each applicable as needed based on the complexity of the transformation required. Data discovery Data mapping Code generation Code execution Data review These steps are often the focus of developers or technical data analysts who may use multiple specialized tools to perform their tasks. The steps can be described as follows: Data discovery is the first step in the data transformation process. Typically the data is profiled using profiling tools or sometimes using manually written profiling scripts to better understand the structure and characteristics of the data and decide how it needs to be transformed. Data mapping is the process of defining how individual fields are mapped, modified, joined, filtered, aggregated etc. to produce the final desired output. Developers or technical data analysts traditionally perform data mapping since they work in the specific technologies to define the transformation rules (e.g. visual ETL tools, transformation languages). Code generation is the process of generating executable code (e.g. SQL, Python, R, or other executable instructions) that will transform the data based on the desired and defined data mapping rules. Typically, the data transformation technologies generate this code based on the definitions or metadata defined by the developers. Code execution is the step whereby the generated code is executed against the data to create the desired output. The executed code may be tightly integrated into the transformation tool, or it may require separate steps by the developer to manually execute the generated code. Data review is the final step in the process, which focuses on ensuring the output data meets the transformation requirements. It is typically the business user or final end-user of the data that performs this step. Any anomalies or errors in the data that are found and communicated back to the developer or data analyst as new requirements to be implemented in the transformation process. == Types of data transformation == === Batch data transformation === Traditionally, data transformation has been a bulk or batch process, whereby developers write code or implement transformation rules in a data integration tool, and then execute that code or those rules on large volumes of data. This process can follow the linear set of steps as described in the data transformation process above. Batch data transformation is the cornerstone of virtually all data integration technologies such as data warehousing, data migration and application integration. When data must be transformed and delivered with low latency, the term "microbatch" is often used. This refers to small batches of data (e.g. a small number of rows or a small set of data objects) that can be processed very quickly and delivered to the target system when needed. === Benefits of batch data transformation === Traditional data transformation processes have served companies well for decades. The various tools and technologies (data profiling, data visualization, data cleansing, data integration etc.) have matured and most (if not all) enterprises transform enormous volumes of data that feed internal and external applications, data warehouses and other data stores. === Limitations of traditional data transformation === This traditional process also has limitations that hamper its overall efficiency and effectiveness. The people who need to use the data (e.g. business users) do not play a direct role in the data transformation process. Typically, users hand over the data transformation task to developers who have the necessary coding or technical skills to define the transformations and execute them on the data. This process leaves the bulk of the work of defining the required transformations to the developer, which often in turn do not have the same domain knowledge as the business user. The developer interprets the business user requirements and implements the related code/logic. This has the potential of introducing errors into the process (through misinterpreted requirements), and also increases the time to arrive at a solution. This problem has given rise to the need for agility and self-service in data integration (i.e. empowering the user of the data and enabling them to transform the data themselves interactively). There are companies that provide self-service data transformation tools. They are aiming to efficiently analyze, map and transform large volumes of data without the technical knowledge and process complexity that currently exists. While these companies use traditional batch transformation, their tools enable more interactivity for users through visual platforms and easily repeated scripts. Still, there might be some compatibility issues (e.g. new data sources like IoT may not work correctly with older tools) and compliance limitations due to the difference in data governance, preparation and audit practices. === Interactive data transformation === Interactive data transformation (IDT) is an emerging capability that allows business analysts and business users the ability to directly interact with large datasets through a visual interface, understand the characteristics of the data (via automated data profiling or visualization), and change or correct the data through simple interactions such as clicking or selecting certain elements of the data. Although interactive data transformation follows the same data integration process steps as batch data integration, the key difference is that the steps are not necessarily followed in a linear fashion and typically don't require significant technical skills for completion. There are a number of companies that provide interactive data transformation tools, including Trifacta, Alteryx and Paxata. They are aiming to efficiently analyze, map and transform large volumes of data while at the same time abstracting away some of the technical complexity and processes which take place under the hood. Interactive data transformation solutions provide an integrated visual interface that combines the previously disparate steps of data analysis, data mapping and code generation/execution and data inspection. That is, if changes are made at one step (like for example renaming), the software automatically updates the preceding or following steps accordingly. Interfaces for interactive data transformation incorporate visualizations to show the user patterns and anomalies in the data so they can identify erroneous or outlying values. Once they've finished transforming the data, the system can generate executable code/logic, which can be executed or applied to subsequent similar data sets. By removing the developer from the process, interactive data transformation systems shorten the time needed to prepare and transform the data, eliminate costly errors in the interpretation of user requirements and empower business users and analysts to control their data and interact with it as needed. == Transformational languages == There are numerous languages available for performing data transformation. Many transformation languages require a grammar to be provided. In many cases, the grammar is structured using something closely resembling Backus–Naur form (BNF). There are numerous languages

  Read more →
• 

  Social media as a news source

  Social media as a news source is defined as the use of online social media platforms such as Instagram, TikTok, and Facebook rather than the use of traditional media platforms like the newspaper or live TV to obtain news. Television had just begun to turn a nation of people who once listened to media content into watchers of media content between the 1950s and the 1980s when the popularity of social media had also begun creating a nation of media content creators. Almost half of Americans use social media as a news source, according to the Pew Research Center. As social media's role in news consumption grows, questions have emerged about its impact on knowledge, the formation of echo chambers, and the effectiveness of fact-checking efforts in combating misinformation. Social media platforms allow user-generated content and sharing content within one's own virtual network. Using social media as a news source allows users to engage with news in a variety of ways including: Consuming and discovering news Sharing or reposting news Posting one's own photos, videos, or reports of news (i.e., engage in citizen or participatory journalism) Commenting on news posts Using social media as a news source has become an increasingly popular way for people of all age groups to obtain current and important information. Just like many other new forms of technology there are going to be pros and cons. There are ways that social media positively affects the world of news and journalism but it is important to acknowledge that there are also ways in which social media has a negative effect on the news. With this accessibility, people now have more ways to consume false news, biased news, and even disturbing content. In 2019, the Pew Research Center created a poll that reported Americans are wary about the ways that social media sites share news and certain content. This wariness of accuracy grew as awareness that social media sites could be exploited by bad actors who concoct false narratives and fake news. == Relationship to traditional news sources == Unlike traditional news platforms such as newspapers and news shows, social media platforms allow people without professional journalistic backgrounds to create news and cover events that news agencies might not cover. Social media users may read a set of news that differs slightly from what newspaper editors prioritize in the print press. A 2019 study found that Facebook and Twitter users are more likely to share politics, public affairs, and visual media news. Typically social media users circulate more towards posting about negative news. A study of tweets found that while optimistic-sounding and neutral-sounding tweets were equally likely to express certainty or uncertainty, the pessimistic tweets were nearly twice as likely to appear certain of an outcome than uncertain. These results could imply that posts of a more pessimistic nature that are also written with an air of certainty are more likely to be shared or otherwise permeate groups on Twitter. A similar bias towards negativity has developed on Facebook, where internal memos revealed that an algorithm built to promote "meaningful social interaction" actually incentivized publishers to promote negative and sensational news. Biases towards negativity need to be considered when the utility of new media is addressed, as the potential for human opinion to overemphasize any particular news story is greater despite general improvement. In order to compete in this rapidly changing technological environment, there has been an upheaval of traditional news sources onto online spaces. The production and circulation of newspaper prints have continued to globally decline in accordance with the increasing presence of news outlets on social media. Prominent platforms such as Twitter and Facebook have been key in engaging users through the integration of journalistic news into their newsfeeds. This feature has now become a foundational part of these apps' interfaces. Social media incentivizes both legacy news brands and individual professional journalists to share their reporting and interact with audiences on social platforms to boost engagement. However, most people who consume news on social media report that accessing news is not their main motivation for being on social media, but rather, they see and consume news incidentally. Nonetheless, informational interviews reveal that these consumers rely on being informed through social media. Some news consumers attest that a news brand's participation in social media does not improve their trust in the brand and that more in-depth reporting and more transparency about biases would improve trust instead. == Use as a news source == Globally, data from 2020 shows that over 70% of adult participants from Kenya, South Africa, Chile, Bulgaria, Greece, and Argentina utilized social media for news while those from France, the UK, the Netherlands, Germany, and Japan were reportedly less than 40 percent. According to the Pew Research Center, 20% of adults in the United States in 2018 said they get their news from social media "often," compared to 16% who said they often get news from print newspapers, 26% who often get it from the radio, 33% who often get it from news websites, and 49% who often get it from TV. The same survey found that social media was the most popular way for American adults age 18–29 to get news, the second-to-last most popular way for Americans age 20–49 to get news, and the least popular way for American adults age 50-64 and 65+ to get the news. In 2019, the Pew Research Center found that over half of Americans (54%) either got their news "sometimes" or "often" from social media, and Facebook was the most popular social media site where American adults got their news. However, at least 50% off all respondents reported that the following were either a "very big problem" or a "moderately big problem" for getting news on social media: One-sided news (83%) Inaccurate news (81%) Censorship of the news (69%) Uncivil discussions about the news (69%) Harassment of journalists (57%) News organizations or personalities being banned (53%) Violent or disturbing news images or videos (51%) In a later survey from the same year, the Pew Research Center reported that 18% of American adults reported that the most common way they get news about politics and the election was from social media. Additional source information shows that from politics and the United States presidential election in 2016, the popularity of fake news had grown to global attention. With this information, the study explains that more than 60 percent of adults receive their news from social media, the most popular being Facebook. With the increase of fake news, and the large amount of adult participation on these social media sites, it made it much harder for those who were searching for news to find a source that they could find credible. Another study found that adult participants found their own friends on Facebook to be a more reliable source of information online compared to a professional news organization. Although, when news was posted by a news organization online, they were then found more reliable compared to when they are shared by their online friends. Showing that adult participants found that the news that was only posted on Facebook and social media was much more credible to them than compared to other forms of information spreading. The study further states that these outcomes have the potential explanation that the topic of the news article played a part in the ways they were affected. This could have affected the way adult participants interacted with the different news sources, such as their online friends compared to a news organization, prominently because depending on the story, they want to have the correct information about the news from the most credible source. === By young people === Social media platforms are some of the most easily accessible forms of news and with the growing generations, the technology is only going to grow. With that, the use of social media in younger generations is also going to grow alongside it. Technology in the hands of young kids can be a concern moving into the future. Globally, there is evidence that through social media, youth have become more directly involved in protests, social campaigns and generally, in the sharing of news across multiple platforms. The number of people who use social media platforms such as Twitter, Facebook, Instagram, or Snapchat as ways to seek information has increased significantly in recent years especially for people who are part of the younger generation.TikTok is a rapidly expanding platform that young adults can use to find news content on social media. TikTok is one of the sites that young adults and teens utilize to get news about trending themes and controversial topics. The younger generation accepts without hesitation the information that thei

  Read more →