AI Assistant Zalando

AI Assistant Zalando — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Signal transfer function

  The signal transfer function (SiTF) is a measure of the signal output versus the signal input of a system such as an infrared system or sensor. There are many general applications of the SiTF. Specifically, in the field of image analysis, it gives a measure of the noise of an imaging system, and thus yields one assessment of its performance. == SiTF evaluation == In evaluating the SiTF curve, the signal input and signal output are measured differentially; meaning, the differential of the input signal and differential of the output signal are calculated and plotted against each other. An operator, using computer software, defines an arbitrary area, with a given set of data points, within the signal and background regions of the output image of the infrared sensor, i.e. of the unit under test (UUT), (see "Half Moon" image below). The average signal and background are calculated by averaging the data of each arbitrarily defined region. A second order polynomial curve is fitted to the data of each line. Then, the polynomial is subtracted from the average signal and background data to yield the new signal and background. The difference of the new signal and background data is taken to yield the net signal. Finally, the net signal is plotted versus the signal input. The signal input of the UUT is within its own spectral response. (e.g. color-correlated temperature, pixel intensity, etc.). The slope of the linear portion of this curve is then found using the method of least squares. == SiTF curve == The net signal is calculated from the average signal and background, as in signal to noise ratio (imaging)#Calculations. The SiTF curve is then given by the signal output data, (net signal data), plotted against the signal input data (see graph of SiTF to the right). All the data points in the linear region of the SiTF curve can be used in the method of least squares to find a linear approximation. Given n {\displaystyle n\,} data points ( x i , y i ) {\displaystyle (x_{i}\,,y_{i}\,)} a best fit line parameterized as y = m x + b {\displaystyle y=mx+b\,} is given by: m = ∑ x i y i n − ∑ x i n ∑ y i n ∑ x i 2 n − ( ∑ x i n ) 2 b = ∑ y i n − m ∑ x i n {\displaystyle m={\frac {{\frac {\sum x_{i}y_{i}}{n}}-{\frac {\sum x_{i}}{n}}{\frac {\sum y_{i}}{n}}}{{\frac {\sum x_{i}^{2}}{n}}-({\frac {\sum x_{i}}{n}})^{2}}}\qquad \qquad b={\frac {\sum y_{i}}{n}}-m{\frac {\sum x_{i}}{n}}}

  Read more →
• 

  Parity benchmark

  Parity problems are widely used as benchmark problems in genetic programming but inherited from the artificial neural network community. Parity is calculated by summing all the binary inputs and reporting if the sum is odd or even. This is considered difficult because: a very simple artificial neural network cannot solve it, and all inputs need to be considered and a change to any one of them changes the answer.

  Read more →
• 

  Blockmodeling linked networks

  Blockmodeling linked networks is an approach in blockmodeling in analysing the linked networks. Such approach is based on the generalized multilevel blockmodeling approach. The main objective of this approach is to achieve clustering of the nodes from all involved sets, while at the same time using all available information. At the same time, all one-mode and two-node networks, that are connected, are blockmodeled, which results in obtaining only one clustering, using nodes from each sets. Each cluster ideally contains only nodes from one set, which also allows the modeling of the links among clusters from different sets (through two-mode networks). This approach was introduced by Aleš Žiberna in 2014. Blockmodeling linked networks can be done using: separate analysis: blockmodeling each level separately; conversion approach: converting all one-mode networks to the same level and joining with two-mode networks; a true multilevel approach: one-mode and two-mode networks are blockmodeled at the same time, resulting in one clustering for nodes from each level.

  Read more →
• 

  Independent component analysis

  In signal processing, independent component analysis (ICA) is a computational method for separating a multivariate signal into additive subcomponents. This is done by assuming that at most one subcomponent is Gaussian and that the subcomponents are statistically independent from each other. ICA was invented by Jeanny Hérault and Christian Jutten in 1985. ICA is a special case of blind source separation. A common example application of ICA is the "cocktail party problem" of listening in on one person's speech in a noisy room. == Introduction == Independent component analysis attempts to decompose a multivariate signal into independent non-Gaussian signals. As an example, sound is usually a signal that is composed of the numerical addition, at each time t, of signals from several sources. The question then is whether it is possible to separate these contributing sources from the observed total signal. When the statistical independence assumption is correct, blind ICA separation of a mixed signal gives very good results. It is also used for signals that are not supposed to be generated by mixing for analysis purposes. A simple application of ICA is the "cocktail party problem", where the underlying speech signals are separated from a sample data consisting of people talking simultaneously in a room. Usually the problem is simplified by assuming no time delays or echoes. Note that a filtered and delayed signal is a copy of a dependent component, and thus the statistical independence assumption is not violated. Mixing weights for constructing the M {\textstyle M} observed signals from the N {\textstyle N} components can be placed in an M × N {\textstyle M\times N} matrix. An important thing to consider is that if N {\textstyle N} sources are present, at least N {\textstyle N} observations (e.g. microphones if the observed signal is audio) are needed to recover the original signals. When there are an equal number of observations and source signals, the mixing matrix is square ( M = N {\textstyle M=N} ). Other cases of underdetermined ( M < N {\textstyle M N {\textstyle M>N} ) have been investigated. The success of ICA separation of mixed signals relies on two assumptions and three effects of mixing source signals. Two assumptions: The source signals are independent of each other. The values in each source signal have non-Gaussian distributions. Three effects of mixing source signals: Independence: As per assumption 1, the source signals are independent; however, their signal mixtures are not. This is because the signal mixtures share the same source signals. Normality: According to the Central Limit Theorem, the distribution of a sum of independent random variables with finite variance tends towards a Gaussian distribution.Loosely speaking, a sum of two independent random variables usually has a distribution that is closer to Gaussian than any of the two original variables. Here we consider the value of each signal as the random variable. Complexity: The temporal complexity of any signal mixture is greater than that of its simplest constituent source signal. Those principles contribute to the basic establishment of ICA. If the signals extracted from a set of mixtures are independent and have non-Gaussian distributions or have low complexity, then they must be source signals. Another common example is image steganography, where ICA is used to embed one image within another. For instance, two grayscale images can be linearly combined to create mixed images in which the hidden content is visually imperceptible. ICA can then be used to recover the original source images from the mixtures. This technique underlies digital watermarking, which allows the embedding of ownership information into images, as well as more covert applications such as undetected information transmission. The method has even been linked to real-world cyberespionage cases. In such applications, ICA serves to unmix the data based on statistical independence, making it possible to extract hidden components that are not apparent in the observed data. Steganographic techniques, including those potentially involving ICA-based analysis, have been used in real-world cyberespionage cases. In 2010, the FBI uncovered a Russian spy network known as the "Illegals Program" (Operation Ghost Stories), where agents used custom-built steganography tools to conceal encrypted text messages within image files shared online. In another case, a former General Electric engineer, Xiaoqing Zheng, was convicted in 2022 for economic espionage. Zheng used steganography to exfiltrate sensitive turbine technology by embedding proprietary data within image files for transfer to entities in China. == Defining component independence == ICA finds the independent components (also called factors, latent variables or sources) by maximizing the statistical independence of the estimated components. We may choose one of many ways to define a proxy for independence, and this choice governs the form of the ICA algorithm. The two broadest definitions of independence for ICA are Minimization of mutual information Maximization of non-Gaussianity The Minimization-of-Mutual information (MMI) family of ICA algorithms uses measures like Kullback-Leibler Divergence and maximum entropy. The non-Gaussianity family of ICA algorithms, motivated by the central limit theorem, uses kurtosis and negentropy. Typical algorithms for ICA use centering (subtract the mean to create a zero mean signal), whitening (usually with the eigenvalue decomposition), and dimensionality reduction as preprocessing steps in order to simplify and reduce the complexity of the problem for the actual iterative algorithm. == Mathematical definitions == Linear independent component analysis can be divided into noiseless and noisy cases, where noiseless ICA is a special case of noisy ICA. Nonlinear ICA should be considered as a separate case. === General Derivation === In the classical ICA model, it is assumed that the observed data x i ∈ R m {\displaystyle \mathbf {x} _{i}\in \mathbb {R} ^{m}} at time t i {\displaystyle t_{i}} is generated from source signals s i ∈ R m {\displaystyle \mathbf {s} _{i}\in \mathbb {R} ^{m}} via a linear transformation x i = A s i {\displaystyle \mathbf {x} _{i}=A\mathbf {s} _{i}} , where A {\displaystyle A} is an unknown, invertible mixing matrix. To recover the source signals, the data is first centered (zero mean), and then whitened so that the transformed data has unit covariance. This whitening reduces the problem from estimating a general matrix A {\displaystyle A} to estimating an orthogonal matrix V {\displaystyle V} , significantly simplifying the search for independent components. If the covariance matrix of the centered data is Σ x = A A ⊤ {\displaystyle \Sigma _{x}=AA^{\top }} , then using the eigen-decomposition Σ x = Q D Q ⊤ {\displaystyle \Sigma _{x}=QDQ^{\top }} , the whitening transformation can be taken as D − 1 / 2 Q ⊤ {\displaystyle D^{-1/2}Q^{\top }} . This step ensures that the recovered sources are uncorrelated and of unit variance, leaving only the task of rotating the whitened data to maximize statistical independence. This general derivation underlies many ICA algorithms and is foundational in understanding the ICA model. ==== Reduced Mixing Problem ==== Independent component analysis (ICA) addresses the problem of recovering a set of unobserved source signals s i = ( s i 1 , s i 2 , … , s i m ) T {\displaystyle s_{i}=(s_{i1},s_{i2},\dots ,s_{im})^{T}} from observed mixed signals x i = ( x i 1 , x i 2 , … , x i m ) T {\displaystyle x_{i}=(x_{i1},x_{i2},\dots ,x_{im})^{T}} , based on the linear mixing model: x i = A s i , {\displaystyle x_{i}=A\,s_{i},} where the A {\displaystyle A} is an m × m {\displaystyle m\times m} invertible matrix called the mixing matrix, s i {\displaystyle s_{i}} represents the m‑dimensional vector containing the values of the sources at time t i {\displaystyle t_{i}} , and x i {\displaystyle x_{i}} is the corresponding vector of observed values at time t i {\displaystyle t_{i}} . The goal is to estimate both A {\displaystyle A} and the source signals { s i } {\displaystyle \{s_{i}\}} solely from the observed data { x i } {\displaystyle \{x_{i}\}} . After centering, the Gram matrix is computed as: ( X ∗ ) T X ∗ = Q D Q T , {\displaystyle (X^{})^{T}X^{}=Q\,D\,Q^{T},} where D is a diagonal matrix with positive entries (assuming X ∗ {\displaystyle X^{}} has maximum rank), and Q is an orthogonal matrix. Writing the SVD of the mixing matrix A = U Σ V T {\displaystyle A=U\Sigma V^{T}} and comparing with A A T = U Σ 2 U T {\displaystyle AA^{T}=U\Sigma ^{2}U^{T}} the mixing A has the form A = Q D 1 / 2 V T . {\displaystyle A=Q\,D^{1/2}\,V^{T}.} So, the normalized source values satisfy s i ∗ = V y i ∗ {\displaystyle s_{i}^{}=V\,y_{i}^{}} , where y i ∗ = D − 1 2 Q T x i ∗ . {\displaystyle y_{i}^{}=D^{-{\tfrac {1}{2}}}Q^{T}x_{i}^{}.} Thus, ICA reduces

  Read more →
• 

  Non-native speech database

  A non-native speech database is a speech database of non-native pronunciations of English. Such databases are used in the development of: multilingual automatic speech recognition systems, text to speech systems, pronunciation trainers, and second language learning systems. == List == The actual table with information about the different databases is shown in Table 2. === Legend === In the table of non-native databases some abbreviations for language names are used. They are listed in Table 1. Table 2 gives the following information about each corpus: The name of the corpus, the institution where the corpus can be obtained, or at least further information should be available, the language which was actually spoken by the speakers, the number of speakers, the native language of the speakers, the total amount of non-native utterances the corpus contains, the duration in hours of the non-native part, the date of the first public reference to this corpus, some free text highlighting special aspects of this database and a reference to another publication. The reference in the last field is in most cases to the paper which is especially devoted to describe this corpus by the original collectors. In some cases it was not possible to identify such a paper. In these cases a paper is referenced which is using this corpus is. Some entries are left blank and others are marked with unknown. The difference here is that blank entries refer to attributes where the value is just not known. Unknown entries, however, indicate that no information about this attribute is available in the database itself. As an example, in the Jupiter weather database no information about the origin of the speakers is given. Therefore this data would be less useful for verifying accent detection or similar issues. Where possible, the name is a standard name of the corpus, for some of the smaller corpora, however, there was no established name and hence an identifier had to be created. In such cases, a combination of the institution and the collector of the database is used. In the case where the databases contain native and non-native speech, only attributes of the non-native part of the corpus are listed. Most of the corpora are collections of read speech. If the corpus instead consists either partly or completely of spontaneous utterances, this is mentioned in the Specials column.

  Read more →
• 

  Stochastic variance reduction

  (Stochastic) variance reduction is an algorithmic approach to minimizing functions that can be decomposed into finite sums. By exploiting the finite sum structure, variance reduction techniques are able to achieve convergence rates that are impossible to achieve with methods that treat the objective as an infinite sum, as in the classical Stochastic approximation setting. Variance reduction approaches are widely used for training machine learning models such as logistic regression and support vector machines as these problems have finite-sum structure and uniform conditioning that make them ideal candidates for variance reduction. == Finite sum objectives == A function f {\displaystyle f} is considered to have finite sum structure if it can be decomposed into a summation or average: f ( x ) = 1 n ∑ i = 1 n f i ( x ) , {\displaystyle f(x)={\frac {1}{n}}\sum _{i=1}^{n}f_{i}(x),} where the function value and derivative of each f i {\displaystyle f_{i}} can be queried independently. Although variance reduction methods can be applied for any positive n {\displaystyle n} and any f i {\displaystyle f_{i}} structure, their favorable theoretical and practical properties arise when n {\displaystyle n} is large compared to the condition number of each f i {\displaystyle f_{i}} , and when the f i {\displaystyle f_{i}} have similar (but not necessarily identical) Lipschitz smoothness and strong convexity constants. The finite sum structure should be contrasted with the stochastic approximation setting which deals with functions of the form f ( θ ) = E ξ ⁡ [ F ( θ , ξ ) ] {\textstyle f(\theta )=\operatorname {E} _{\xi }[F(\theta ,\xi )]} which is the expected value of a function depending on a random variable ξ {\textstyle \xi } . Any finite sum problem can be optimized using a stochastic approximation algorithm by using F ( ⋅ , ξ ) = f ξ {\displaystyle F(\cdot ,\xi )=f_{\xi }} . == Rapid Convergence == Stochastic variance reduced methods without acceleration are able to find a minima of f {\displaystyle f} within accuracy ϵ > {\displaystyle \epsilon >} , i.e. f ( x ) − f ( x ∗ ) ≤ ϵ {\displaystyle f(x)-f(x_{})\leq \epsilon } in a number of steps of the order: O ( ( L μ + n ) log ⁡ ( 1 ϵ ) ) . {\displaystyle O\left(\left({\frac {L}{\mu }}+n\right)\log \left({\frac {1}{\epsilon }}\right)\right).} The number of steps depends only logarithmically on the level of accuracy required, in contrast to the stochastic approximation framework, where the number of steps O ( L / ( μ ϵ ) ) {\displaystyle O{\bigl (}L/(\mu \epsilon ){\bigr )}} required grows proportionally to the accuracy required. Stochastic variance reduction methods converge almost as fast as the gradient descent method's O ( ( L / μ ) log ⁡ ( 1 / ϵ ) ) {\displaystyle O{\bigl (}(L/\mu )\log(1/\epsilon ){\bigr )}} rate, despite using only a stochastic gradient, at a 1 / n {\displaystyle 1/n} lower cost than gradient descent. Accelerated methods in the stochastic variance reduction framework achieve even faster convergence rates, requiring only O ( ( n L μ + n ) log ⁡ ( 1 ϵ ) ) {\displaystyle O\left(\left({\sqrt {\frac {nL}{\mu }}}+n\right)\log \left({\frac {1}{\epsilon }}\right)\right)} steps to reach ϵ {\displaystyle \epsilon } accuracy, potentially n {\displaystyle {\sqrt {n}}} faster than non-accelerated methods. Lower complexity bounds. for the finite sum class establish that this rate is the fastest possible for smooth strongly convex problems. == Approaches == Variance reduction approaches fall within four main categories: table averaging methods, full-gradient snapshot methods, recursive estimator methods (e.g., SARAH), and dual methods. Each category contains methods designed for dealing with convex, non-smooth, and non-convex problems, each differing in hyper-parameter settings and other algorithmic details. === SAGA === In the SAGA method, the prototypical table averaging approach, a table of size n {\displaystyle n} is maintained that contains the last gradient witnessed for each f i {\displaystyle f_{i}} term, which we denote g i {\displaystyle g_{i}} . At each step, an index i {\displaystyle i} is sampled, and a new gradient ∇ f i ( x k ) {\displaystyle \nabla f_{i}(x_{k})} is computed. The iterate x k {\displaystyle x_{k}} is updated with: x k + 1 = x k − γ [ ∇ f i ( x k ) − g i + 1 n ∑ i = 1 n g i ] , {\displaystyle x_{k+1}=x_{k}-\gamma \left[\nabla f_{i}(x_{k})-g_{i}+{\frac {1}{n}}\sum _{i=1}^{n}g_{i}\right],} and afterwards table entry i {\displaystyle i} is updated with g i = ∇ f i ( x k ) {\displaystyle g_{i}=\nabla f_{i}(x_{k})} . SAGA is among the most popular of the variance reduction methods due to its simplicity, easily adaptable theory, and excellent performance. It is the successor of the SAG method, improving on its flexibility and performance. === SVRG === The stochastic variance reduced gradient method (SVRG), the prototypical snapshot method, uses a similar update except instead of using the average of a table it instead uses a full-gradient that is reevaluated at a snapshot point x ~ {\displaystyle {\tilde {x}}} at regular intervals of m ≥ n {\displaystyle m\geq n} iterations. The update becomes: x k + 1 = x k − γ [ ∇ f i ( x k ) − ∇ f i ( x ~ ) + ∇ f ( x ~ ) ] , {\displaystyle x_{k+1}=x_{k}-\gamma [\nabla f_{i}(x_{k})-\nabla f_{i}({\tilde {x}})+\nabla f({\tilde {x}})],} This approach requires two stochastic gradient evaluations per step, one to compute ∇ f i ( x k ) {\displaystyle \nabla f_{i}(x_{k})} and one to compute ∇ f i ( x ~ ) , {\displaystyle \nabla f_{i}({\tilde {x}}),} where-as table averaging approaches need only one. Despite the high computational cost, SVRG is popular as its simple convergence theory is highly adaptable to new optimization settings. It also has lower storage requirements than tabular averaging approaches, which make it applicable in many settings where tabular methods can not be used. === SARAH === The SARAH (stochastic recursive gradient) method maintains a recursive estimator of the gradient rather than storing a table of past gradients (as in SAGA) or computing periodic full-gradient snapshots (as in SVRG). At the start of an inner loop, a full gradient is computed at a reference point x ~ {\displaystyle {\tilde {x}}} : v 0 = ∇ f ( x ~ ) {\displaystyle v_{0}=\nabla f({\tilde {x}})} . For inner iterations, with a sampled index i k {\displaystyle i_{k}} , the gradient estimator and iterate are updated by: v k = ∇ f i k ( x k ) − ∇ f i k ( x k − 1 ) + v k − 1 , x k + 1 = x k − γ v k . {\displaystyle v_{k}=\nabla f_{i_{k}}(x_{k})-\nabla f_{i_{k}}(x_{k-1})+v_{k-1},\qquad x_{k+1}=x_{k}-\gamma v_{k}.} This recursion requires two component-gradient evaluations per step ∇ f i k ( x k ) {\displaystyle \nabla f_{i_{k}}(x_{k})} and ∇ f i k ( x k − 1 ) {\displaystyle \nabla f_{i_{k}}(x_{k-1})} but does not need to store per-sample gradients, resulting in lower memory cost than table-averaging methods. SARAH admits linear convergence for strongly convex functions and has been extended to more general nonconvex and composite problems. === SDCA === Exploiting the dual representation of the objective leads to another variance reduction approach that is particularly suited to finite-sums where each term has a structure that makes computing the convex conjugate f i ∗ , {\displaystyle f_{i}^{},} or its proximal operator tractable. The standard SDCA method considers finite sums that have additional structure compared to generic finite sum setting: f ( x ) = 1 n ∑ i = 1 n f i ( x T v i ) + λ 2 ‖ x ‖ 2 , {\displaystyle f(x)={\frac {1}{n}}\sum _{i=1}^{n}f_{i}(x^{T}v_{i})+{\frac {\lambda }{2}}\|x\|^{2},} where each f i {\displaystyle f_{i}} is 1 dimensional and each v i {\displaystyle v_{i}} is a data point associated with f i {\displaystyle f_{i}} . SDCA solves the dual problem: max α ∈ R n − 1 n ∑ i = 1 n f i ∗ ( − α i ) − λ 2 ‖ 1 λ n ∑ i = 1 n α i v i ‖ 2 , {\displaystyle \max _{\alpha \in \mathbb {R} ^{n}}-{\frac {1}{n}}\sum _{i=1}^{n}f_{i}^{}(-\alpha _{i})-{\frac {\lambda }{2}}\left\|{\frac {1}{\lambda n}}\sum _{i=1}^{n}\alpha _{i}v_{i}\right\|^{2},} by a stochastic coordinate ascent procedure, where at each step the objective is optimized with respect to a randomly chosen coordinate α i {\displaystyle \alpha _{i}} , leaving all other coordinates the same. An approximate primal solution x {\displaystyle x} can be recovered from the α {\displaystyle \alpha } values: x = 1 λ n ∑ i = 1 n α i v i {\displaystyle x={\frac {1}{\lambda n}}\sum _{i=1}^{n}\alpha _{i}v_{i}} . This method obtains similar theoretical rates of convergence to other stochastic variance reduced methods, while avoiding the need to specify a step-size parameter. It is fast in practice when λ {\displaystyle \lambda } is large, but significantly slower than the other approaches when λ {\displaystyle \lambda } is small. == Accelerated approaches == Accelerated variance reduction methods are built upon the standard methods above. The earliest approaches make use of proximal operators t

  Read more →
• 

  Medoid

  Medoids are representative objects of a data set or a cluster within a data set whose sum of dissimilarities to all the objects in the cluster is minimal. Medoids are similar in concept to means or centroids, but medoids are always restricted to be members of the data set. Medoids are most commonly used on data when a mean or centroid cannot be defined, such as graphs. They are also used in contexts where the centroid is not representative of the dataset like in images, 3-D trajectories and gene expression (where while the data is sparse the medoid need not be). These are also of interest while wanting to find a representative using some distance other than squared euclidean distance (for instance in movie-ratings). For some data sets there may be more than one medoid, as with medians. A common application of the medoid is the k-medoids clustering algorithm, which is similar to the k-means algorithm but works when a mean or centroid is not definable. This algorithm basically works as follows. First, a set of medoids is chosen at random. Second, the distances to the other points are computed. Third, data are clustered according to the medoid they are most similar to. Fourth, the medoid set is optimized via an iterative process. Note that a medoid is not equivalent to a median, a geometric median, or centroid. A median is only defined on 1-dimensional data, and it only minimizes dissimilarity to other points for metrics induced by a norm (such as the Manhattan distance or Euclidean distance). A geometric median is defined in any dimension, but unlike a medoid, it is not necessarily a point from within the original dataset. == Definition == Let X := { x 1 , x 2 , … , x n } {\textstyle {\mathcal {X}}:=\{x_{1},x_{2},\dots ,x_{n}\}} be a set of n {\textstyle n} points in a space with a distance function d. Medoid is defined as x medoid = arg ⁡ min y ∈ X ∑ i = 1 n d ( y , x i ) . {\displaystyle x_{\text{medoid}}=\arg \min _{y\in {\mathcal {X}}}\sum _{i=1}^{n}d(y,x_{i}).} == Clustering with medoids == Medoids are a popular replacement for the cluster mean when the distance function is not (squared) Euclidean distance, or not even a metric (as the medoid does not require the triangle inequality). When partitioning the data set into clusters, the medoid of each cluster can be used as a representative of each cluster. Clustering algorithms based on the idea of medoids include: Partitioning Around Medoids (PAM), the standard k-medoids algorithm Hierarchical Clustering Around Medoids (HACAM), which uses medoids in hierarchical clustering == Algorithms to compute the medoid of a set == From the definition above, it is clear that the medoid of a set X {\displaystyle {\mathcal {X}}} can be computed after computing all pairwise distances between points in the ensemble. This would take O ( n 2 ) {\textstyle O(n^{2})} distance evaluations (with n = | X | {\displaystyle n=|{\mathcal {X}}|} ). In the worst case, one can not compute the medoid with fewer distance evaluations. However, there are many approaches that allow us to compute medoids either exactly or approximately in sub-quadratic time under different statistical models. If the points lie on the real line, computing the medoid reduces to computing the median which can be done in O ( n ) {\textstyle O(n)} by Quick-select algorithm of Hoare. However, in higher dimensional real spaces, no linear-time algorithm is known. RAND is an algorithm that estimates the average distance of each point to all the other points by sampling a random subset of other points. It takes a total of O ( n log ⁡ n ϵ 2 ) {\textstyle O\left({\frac {n\log n}{\epsilon ^{2}}}\right)} distance computations to approximate the medoid within a factor of ( 1 + ϵ Δ ) {\textstyle (1+\epsilon \Delta )} with high probability, where Δ {\textstyle \Delta } is the maximum distance between two points in the ensemble. Note that RAND is an approximation algorithm, and moreover Δ {\textstyle \Delta } may not be known apriori. RAND was leveraged by TOPRANK which uses the estimates obtained by RAND to focus on a small subset of candidate points, evaluates the average distance of these points exactly, and picks the minimum of those. TOPRANK needs O ( n 5 3 log 4 3 ⁡ n ) {\textstyle O(n^{\frac {5}{3}}\log ^{\frac {4}{3}}n)} distance computations to find the exact medoid with high probability under a distributional assumption on the average distances. trimed presents an algorithm to find the medoid with O ( n 3 2 2 Θ ( d ) ) {\textstyle O(n^{\frac {3}{2}}2^{\Theta (d)})} distance evaluations under a distributional assumption on the points. The algorithm uses the triangle inequality to cut down the search space. Meddit leverages a connection of the medoid computation with multi-armed bandits and uses an upper-Confidence-bound type of algorithm to get an algorithm which takes O ( n log ⁡ n ) {\textstyle O(n\log n)} distance evaluations under statistical assumptions on the points. Correlated Sequential Halving also leverages multi-armed bandit techniques, improving upon Meddit. By exploiting the correlation structure in the problem, the algorithm is able to provably yield drastic improvement (usually around 1-2 orders of magnitude) in both number of distance computations needed and wall clock time. == Implementations == An implementation of RAND, TOPRANK, and trimed can be found here. An implementation of Meddit can be found here and here. An implementation of Correlated Sequential Halving can be found here. == Medoids in text and natural language processing (NLP) == Medoids can be applied to various text and NLP tasks to improve the efficiency and accuracy of analyses. By clustering text data based on similarity, medoids can help identify representative examples within the dataset, leading to better understanding and interpretation of the data. === Text clustering === Text clustering is the process of grouping similar text or documents together based on their content. Medoid-based clustering algorithms can be employed to partition large amounts of text into clusters, with each cluster represented by a medoid document. This technique helps in organizing, summarizing, and retrieving information from large collections of documents, such as in search engines, social media analytics and recommendation systems. === Text summarization === Text summarization aims to produce a concise and coherent summary of a larger text by extracting the most important and relevant information. Medoid-based clustering can be used to identify the most representative sentences in a document or a group of documents, which can then be combined to create a summary. This approach is especially useful for extractive summarization tasks, where the goal is to generate a summary by selecting the most relevant sentences from the original text. === Sentiment analysis === Sentiment analysis involves determining the sentiment or emotion expressed in a piece of text, such as positive, negative, or neutral. Medoid-based clustering can be applied to group text data based on similar sentiment patterns. By analyzing the medoid of each cluster, researchers can gain insights into the predominant sentiment of the cluster, helping in tasks such as opinion mining, customer feedback analysis, and social media monitoring. === Topic modeling === Topic modeling is a technique used to discover abstract topics that occur in a collection of documents. Medoid-based clustering can be applied to group documents with similar themes or topics. By analyzing the medoids of these clusters, researchers can gain an understanding of the underlying topics in the text corpus, facilitating tasks such as document categorization, trend analysis, and content recommendation. === Techniques for measuring text similarity in medoid-based clustering === When applying medoid-based clustering to text data, it is essential to choose an appropriate similarity measure to compare documents effectively. Each technique has its advantages and limitations, and the choice of the similarity measure should be based on the specific requirements and characteristics of the text data being analyzed. The following are common techniques for measuring text similarity in medoid-based clustering: ==== Cosine similarity ==== Cosine similarity is a widely used measure to compare the similarity between two pieces of text. It calculates the cosine of the angle between two document vectors in a high-dimensional space. Cosine similarity ranges between -1 and 1, where a value closer to 1 indicates higher similarity, and a value closer to -1 indicates lower similarity. By visualizing two lines originating from the origin and extending to the respective points of interest, and then measuring the angle between these lines, one can determine the similarity between the associated points. Cosine similarity is less affected by document length, so it may be better at producing medoids that are representative of the content of a cluster instead of the lengt

  Read more →
• 

  Tanagra (machine learning)

  Tanagra is a free suite of machine learning software for research and academic purposes developed by Ricco Rakotomalala at the Lumière University Lyon 2, France. Tanagra supports several standard data mining tasks such as: Visualization, Descriptive statistics, Instance selection, feature selection, feature construction, regression, factor analysis, clustering, classification and association rule learning. Tanagra is an academic project. It is widely used in French-speaking universities. Tanagra is frequently used in real studies and in software comparison papers. == History == The development of Tanagra was started in June 2003. The first version was distributed in December 2003. Tanagra is the successor of Sipina, another free data mining tool which is intended only for supervised learning tasks (classification), especially the interactive and visual construction of decision trees. Sipina is still available online and is maintained. Tanagra is an "open source project" as every researcher can access the source code and add their own algorithms, as long as they agree and conform to the software distribution license. The main purpose of the Tanagra project is to give researchers and students a user-friendly data mining software, conforming to the present norms of the software development in this domain (especially in the design of its GUI and the way to use it), and allowing the analyzation of either real or synthetic data. From 2006, Ricco Rakotomalala made an important documentation effort. A large number of tutorials are published on a dedicated website. They describe the statistical and machine learning methods and their implementation with Tanagra on real case studies. The use of other free data mining tools on the same problems is also widely described. The comparison of the tools enables readers to understand the possible differences in the presentation of results. == Description == Tanagra works similarly to current data mining tools. The user can design visually a data mining process in a diagram. Each node is a statistical or machine learning technique, the connection between two nodes represents the data transfer. But unlike the majority of tools which are based on the workflow paradigm, Tanagra is very simplified. The treatments are represented in a tree diagram. The results are displayed in an HTML format. This makes it is easy to export the outputs in order to visualize the results in a browser. It is also possible to copy the result tables to a spreadsheet. Tanagra makes a good compromise between statistical approaches (e.g. parametric and nonparametric statistical tests), multivariate analysis methods (e.g. factor analysis, correspondence analysis, cluster analysis, regression) and machine learning techniques (e.g. neural network, support vector machine, decision trees, random forest).

  Read more →
• 

  EasyChair

  EasyChair is a web-based conference management software system. It has been used since 2002 in the scientific community for tasks such as organising research paper submission and review. In 2012, EasyChair added an open access online publication service for conference proceedings. == Description == EasyChair is a paid web-based conference management software system used, among other tasks, to organize paper submission and review, similar to other event management system software such as OpenConf. EasyChair used to be run by the Department of Computer Science at the University of Manchester but now it is a commercial service, owned by EasyChair Ltd. in Stockport (established 2016). EasyChair used to be free, for standard service, but as of 2022, only minimal services are free. The EasyChair website also provides an open access online publication service for conference proceedings. When launched in 2012, the service was for computer science only, but in 2016 it was expanded to all sciences. == History == The EasyChair software has been in continuous development since 2002. As of 2015, the code base consists of nearly 300,000 lines of code, and it has been used by more than 41,000 conferences. More than two and a half million users in the scientific community reported using it in 2019.

  Read more →
• 

  Distribution learning theory

  The distributional learning theory or learning of probability distribution is a framework in computational learning theory. It has been proposed from Michael Kearns, Yishay Mansour, Dana Ron, Ronitt Rubinfeld, Robert Schapire and Linda Sellie in 1994 and it was inspired from the PAC-framework introduced by Leslie Valiant. In this framework the input is a number of samples drawn from a distribution that belongs to a specific class of distributions. The goal is to find an efficient algorithm that, based on these samples, determines with high probability the distribution from which the samples have been drawn. Because of its generality, this framework has been used in a large variety of different fields like machine learning, approximation algorithms, applied probability and statistics. This article explains the basic definitions, tools and results in this framework from the theory of computation point of view. == Definitions == Let X {\displaystyle \textstyle X} be the support of the distributions of interest. As in the original work of Kearns et al. if X {\displaystyle \textstyle X} is finite it can be assumed without loss of generality that X = { 0 , 1 } n {\displaystyle \textstyle X=\{0,1\}^{n}} where n {\displaystyle \textstyle n} is the number of bits that have to be used in order to represent any y ∈ X {\displaystyle \textstyle y\in X} . We focus in probability distributions over X {\displaystyle \textstyle X} . There are two possible representations of a probability distribution D {\displaystyle \textstyle D} over X {\displaystyle \textstyle X} . probability distribution function (or evaluator) an evaluator E D {\displaystyle \textstyle E_{D}} for D {\displaystyle \textstyle D} takes as input any y ∈ X {\displaystyle \textstyle y\in X} and outputs a real number E D [ y ] {\displaystyle \textstyle E_{D}[y]} which denotes the probability that of y {\displaystyle \textstyle y} according to D {\displaystyle \textstyle D} , i.e. E D [ y ] = Pr [ Y = y ] {\displaystyle \textstyle E_{D}[y]=\Pr[Y=y]} if Y ∼ D {\displaystyle \textstyle Y\sim D} . generator a generator G D {\displaystyle \textstyle G_{D}} for D {\displaystyle \textstyle D} takes as input a string of truly random bits y {\displaystyle \textstyle y} and outputs G D [ y ] ∈ X {\displaystyle \textstyle G_{D}[y]\in X} according to the distribution D {\displaystyle \textstyle D} . Generator can be interpreted as a routine that simulates sampling from the distribution D {\displaystyle \textstyle D} given a sequence of fair coin tosses. A distribution D {\displaystyle \textstyle D} is called to have a polynomial generator (respectively evaluator) if its generator (respectively evaluator) exists and can be computed in polynomial time. Let C X {\displaystyle \textstyle C_{X}} a class of distribution over X, that is C X {\displaystyle \textstyle C_{X}} is a set such that every D ∈ C X {\displaystyle \textstyle D\in C_{X}} is a probability distribution with support X {\displaystyle \textstyle X} . The C X {\displaystyle \textstyle C_{X}} can also be written as C {\displaystyle \textstyle C} for simplicity. In order to evaluate learnability, it is necessary to have a way to measure how well an approximated distribution D ′ {\displaystyle \textstyle D'} fits the sampled distribution D {\displaystyle \textstyle D} . There are several ways to measure the divergence between two distributions. Three common possibilities are Kullback–Leibler divergence Total variation distance of probability measures Kolmogorov distance Total variation and Kolmogorov distance are true metrics, while KL divergence is not (it lacks symmetry). These measures are ordered by convergence strength: closeness in KL divergence implies closeness in total variation (via Pinsker's inequality), which in turn implies closeness in Kolmogorov distance. Therefore, a learnability result proven under KL divergence automatically holds under the weaker measures, but not vice versa. Since certain measures may be more appropriate in specific applications, we will use d ( D , D ′ ) {\displaystyle \textstyle d(D,D')} to denote a selected divergence between the distribution D {\displaystyle \textstyle D} and the distribution D ′ {\displaystyle \textstyle D'} . The basic input that we use in order to learn a distribution is a number of samples drawn by this distribution. For the computational point of view the assumption is that such a sample is given in a constant amount of time. So it's like having access to an oracle G E N ( D ) {\displaystyle \textstyle GEN(D)} that returns a sample from the distribution D {\displaystyle \textstyle D} . Sometimes the interest is, apart from measuring the time complexity, to measure the number of samples that have to be used in order to learn a specific distribution D {\displaystyle \textstyle D} in class of distributions C {\displaystyle \textstyle C} . This quantity is called sample complexity of the learning algorithm. In order for the problem of distribution learning to be more clear consider the problem of supervised learning as defined in. In this framework of statistical learning theory a training set S = { ( x 1 , y 1 ) , … , ( x n , y n ) } {\displaystyle \textstyle S=\{(x_{1},y_{1}),\dots ,(x_{n},y_{n})\}} and the goal is to find a target function f : X → Y {\displaystyle \textstyle f:X\rightarrow Y} that minimizes some loss function, e.g. the square loss function. More formally f = arg ⁡ min g ∫ V ( y , g ( x ) ) d ρ ( x , y ) {\displaystyle f=\arg \min _{g}\int V(y,g(x))d\rho (x,y)} , where V ( ⋅ , ⋅ ) {\displaystyle V(\cdot ,\cdot )} is the loss function, e.g. V ( y , z ) = ( y − z ) 2 {\displaystyle V(y,z)=(y-z)^{2}} and ρ ( x , y ) {\displaystyle \rho (x,y)} the probability distribution according to which the elements of the training set are sampled. If the conditional probability distribution ρ x ( y ) {\displaystyle \rho _{x}(y)} is known then the target function has the closed form f ( x ) = ∫ y y d ρ x ( y ) {\displaystyle f(x)=\int _{y}yd\rho _{x}(y)} . So the set S {\displaystyle S} is a set of samples from the probability distribution ρ ( x , y ) {\displaystyle \rho (x,y)} . Now the goal of distributional learning theory if to find ρ {\displaystyle \rho } given S {\displaystyle S} which can be used to find the target function f {\displaystyle f} . Definition of learnability A class of distributions C {\displaystyle \textstyle C} is called efficiently learnable if for every ϵ > 0 {\displaystyle \textstyle \epsilon >0} and 0 < δ ≤ 1 {\displaystyle \textstyle 0<\delta \leq 1} given access to G E N ( D ) {\displaystyle \textstyle GEN(D)} for an unknown distribution D ∈ C {\displaystyle \textstyle D\in C} , there exists a polynomial time algorithm A {\displaystyle \textstyle A} , called learning algorithm of C {\displaystyle \textstyle C} , that outputs a generator or an evaluator of a distribution D ′ {\displaystyle \textstyle D'} such that Pr [ d ( D , D ′ ) ≤ ϵ ] ≥ 1 − δ {\displaystyle \Pr[d(D,D')\leq \epsilon ]\geq 1-\delta } If we know that D ′ ∈ C {\displaystyle \textstyle D'\in C} then A {\displaystyle \textstyle A} is called proper learning algorithm, otherwise is called improper learning algorithm. In some settings the class of distributions C {\displaystyle \textstyle C} is a class with well known distributions which can be described by a set of parameters. For instance C {\displaystyle \textstyle C} could be the class of all the Gaussian distributions N ( μ , σ 2 ) {\displaystyle \textstyle N(\mu ,\sigma ^{2})} . In this case the algorithm A {\displaystyle \textstyle A} should be able to estimate the parameters μ , σ {\displaystyle \textstyle \mu ,\sigma } . In this case A {\displaystyle \textstyle A} is called parameter learning algorithm. Obviously the parameter learning for simple distributions is a very well studied field that is called statistical estimation and there is a very long bibliography on different estimators for different kinds of simple known distributions. But distributions learning theory deals with learning class of distributions that have more complicated description. == First results == In their seminal work, Kearns et al. deal with the case where A {\displaystyle \textstyle A} is described in term of a finite polynomial sized circuit and they proved the following for some specific classes of distribution. O R {\displaystyle \textstyle OR} gate distributions for this kind of distributions there is no polynomial-sized evaluator, unless # P ⊆ P / poly {\displaystyle \textstyle \#P\subseteq P/{\text{poly}}} . On the other hand, this class is efficiently learnable with generator. Parity gate distributions this class is efficiently learnable with both generator and evaluator. Mixtures of Hamming Balls this class is efficiently learnable with both generator and evaluator. Probabilistic Finite Automata this class is not efficiently learnable with evaluator under the Noisy Parity Assumption which is an impossibility assumption in the PAC learning fram

  Read more →
• 

  Stochastic gradient descent

  Stochastic gradient descent (often abbreviated SGD) is an iterative method for optimizing an objective function with suitable smoothness properties (e.g. differentiable or subdifferentiable). It can be regarded as a stochastic approximation of gradient descent optimization, since it replaces the actual gradient (calculated from the entire data set) by an estimate thereof (calculated from a randomly selected subset of the data). Especially in high-dimensional optimization problems this reduces the very high computational burden, achieving faster iterations in exchange for a lower convergence rate. The basic idea behind stochastic approximation can be traced back to the Robbins–Monro algorithm of the 1950s. Today, stochastic gradient descent has become an important optimization method in machine learning. == Background == Both statistical estimation and machine learning consider the problem of minimizing an objective function that has the form of a sum: Q ( w ) = 1 n ∑ i = 1 n Q i ( w ) , {\displaystyle Q(w)={\frac {1}{n}}\sum _{i=1}^{n}Q_{i}(w),} where the parameter w {\displaystyle w} that minimizes Q ( w ) {\displaystyle Q(w)} is to be estimated. Each summand function Q i {\displaystyle Q_{i}} is typically associated with the i {\displaystyle i} -th observation in the data set (used for training). In classical statistics, sum-minimization problems arise in least squares and in maximum-likelihood estimation (for independent observations). The general class of estimators that arise as minimizers of sums are called M-estimators. However, in statistics, it has been long recognized that requiring even local minimization is too restrictive for some problems of maximum-likelihood estimation. Therefore, contemporary statistical theorists often consider stationary points of the likelihood function (or zeros of its derivative, the score function, and other estimating equations). The sum-minimization problem also arises for empirical risk minimization. There, Q i ( w ) {\displaystyle Q_{i}(w)} is the value of the loss function at i {\displaystyle i} -th example, and Q ( w ) {\displaystyle Q(w)} is the empirical risk. When used to minimize the above function, a standard (or "batch") gradient descent method would perform the following iterations: w := w − η ∇ Q ( w ) = w − η n ∑ i = 1 n ∇ Q i ( w ) . {\displaystyle w:=w-\eta \,\nabla Q(w)=w-{\frac {\eta }{n}}\sum _{i=1}^{n}\nabla Q_{i}(w).} The step size is denoted by η {\displaystyle \eta } (sometimes called the learning rate in machine learning) and here " := {\displaystyle :=} " denotes the update of a variable in the algorithm. In many cases, the summand functions have a simple form that enables inexpensive evaluations of the sum-function and the sum gradient. For example, in statistics, one-parameter exponential families allow economical function-evaluations and gradient-evaluations. However, in other cases, evaluating the sum-gradient may require expensive evaluations of the gradients from all summand functions. When the training set is enormous and no simple formulas exist, evaluating the sums of gradients becomes very expensive, because evaluating the gradient requires evaluating all the summand functions' gradients. To economize on the computational cost at every iteration, stochastic gradient descent samples a subset of summand functions at every step. This is very effective in the case of large-scale machine learning problems. == Iterative method == In stochastic (or "on-line") gradient descent, the true gradient of Q ( w ) {\displaystyle Q(w)} is approximated by a gradient at a single sample: w := w − η ∇ Q i ( w ) . {\displaystyle w:=w-\eta \,\nabla Q_{i}(w).} As the algorithm sweeps through the training set, it performs the above update for each training sample. Several passes can be made over the training set until the algorithm converges. If this is done, the data can be shuffled for each pass to prevent cycles. Typical implementations may use an adaptive learning rate so that the algorithm converges. In pseudocode, stochastic gradient descent can be presented as : A compromise between computing the true gradient and the gradient at a single sample is to compute the gradient against more than one training sample (called a "mini-batch") at each step. This can perform significantly better than "true" stochastic gradient descent described, because the code can make use of vectorization libraries rather than computing each step separately as was first shown in where it was called "the bunch-mode back-propagation algorithm". It may also result in smoother convergence, as the gradient computed at each step is averaged over more training samples. The convergence of stochastic gradient descent has been analyzed using the theories of convex minimization and of stochastic approximation. Briefly, when the learning rates η {\displaystyle \eta } decrease with an appropriate rate, and subject to relatively mild assumptions, stochastic gradient descent converges almost surely to a global minimum when the objective function is convex or pseudoconvex, and otherwise converges almost surely to a local minimum. This is in fact a consequence of the Robbins–Siegmund theorem. == Linear regression == Suppose we want to fit a straight line y ^ = w 1 + w 2 x {\displaystyle {\hat {y}}=w_{1}+w_{2}x} to a training set with observations ( ( x 1 , y 1 ) , ( x 2 , y 2 ) … , ( x n , y n ) ) {\displaystyle ((x_{1},y_{1}),(x_{2},y_{2})\ldots ,(x_{n},y_{n}))} and corresponding estimated responses ( y ^ 1 , y ^ 2 , … , y ^ n ) {\displaystyle ({\hat {y}}_{1},{\hat {y}}_{2},\ldots ,{\hat {y}}_{n})} using least squares. The objective function to be minimized is Q ( w ) = ∑ i = 1 n Q i ( w ) = ∑ i = 1 n ( y ^ i − y i ) 2 = ∑ i = 1 n ( w 1 + w 2 x i − y i ) 2 . {\displaystyle Q(w)=\sum _{i=1}^{n}Q_{i}(w)=\sum _{i=1}^{n}\left({\hat {y}}_{i}-y_{i}\right)^{2}=\sum _{i=1}^{n}\left(w_{1}+w_{2}x_{i}-y_{i}\right)^{2}.} The last line in the above pseudocode for this specific problem will become: [ w 1 w 2 ] ← [ w 1 w 2 ] − η [ ∂ ∂ w 1 ( w 1 + w 2 x i − y i ) 2 ∂ ∂ w 2 ( w 1 + w 2 x i − y i ) 2 ] = [ w 1 w 2 ] − η [ 2 ( w 1 + w 2 x i − y i ) 2 x i ( w 1 + w 2 x i − y i ) ] . {\displaystyle {\begin{bmatrix}w_{1}\\w_{2}\end{bmatrix}}\leftarrow {\begin{bmatrix}w_{1}\\w_{2}\end{bmatrix}}-\eta {\begin{bmatrix}{\frac {\partial }{\partial w_{1}}}(w_{1}+w_{2}x_{i}-y_{i})^{2}\\{\frac {\partial }{\partial w_{2}}}(w_{1}+w_{2}x_{i}-y_{i})^{2}\end{bmatrix}}={\begin{bmatrix}w_{1}\\w_{2}\end{bmatrix}}-\eta {\begin{bmatrix}2(w_{1}+w_{2}x_{i}-y_{i})\\2x_{i}(w_{1}+w_{2}x_{i}-y_{i})\end{bmatrix}}.} Note that in each iteration or update step, the gradient is only evaluated at a single x i {\displaystyle x_{i}} . This is the key difference between stochastic gradient descent and batched gradient descent. In general, given a linear regression y ^ = ∑ k ∈ 1 : m w k x k {\displaystyle {\hat {y}}=\sum _{k\in 1:m}w_{k}x_{k}} problem, stochastic gradient descent behaves differently when m < n {\displaystyle m

• 

  State–action–reward–state–action

  State–action–reward–state–action (SARSA) is an algorithm for learning a Markov decision process policy, used in the reinforcement learning area of machine learning. It was proposed by Rummery and Niranjan in a technical note with the name "Modified Connectionist Q-Learning" (MCQ-L). The alternative name SARSA, proposed by Rich Sutton, was only mentioned as a footnote. This name reflects the fact that the main function for updating the Q-value depends on the current state of the agent "S1", the action the agent chooses "A1", the reward "R2" the agent gets for choosing this action, the state "S2" that the agent enters after taking that action, and finally the next action "A2" the agent chooses in its new state. The acronym for the quintuple (St, At, Rt+1, St+1, At+1) is SARSA. Some authors use a slightly different convention and write the quintuple (St, At, Rt, St+1, At+1), depending on which time step the reward is formally assigned. The rest of the article uses the former convention. == Algorithm == Q new ( S t , A t ) ← ( 1 − α ) Q ( S t , A t ) + α [ R t + 1 + γ Q ( S t + 1 , A t + 1 ) ] {\displaystyle Q^{\textrm {new}}(S_{t},A_{t})\leftarrow (1-\alpha )Q(S_{t},A_{t})+\alpha \,[R_{t+1}+\gamma \,Q(S_{t+1},A_{t+1})]} A SARSA agent interacts with the environment and updates the policy based on actions taken, hence this is known as an on-policy learning algorithm. The Q value for a state-action is updated by an error, adjusted by the learning rate α. Q values represent the possible reward received in the next time step for taking action a in state s, plus the discounted future reward received from the next state-action observation. Watkin's Q-learning updates an estimate of the optimal state-action value function Q ∗ {\displaystyle Q^{}} based on the maximum reward of available actions. While SARSA learns the Q values associated with taking the policy it follows itself, Watkin's Q-learning learns the Q values associated with taking the optimal policy while following an exploration/exploitation policy. Some optimizations of Watkin's Q-learning may be applied to SARSA. == Hyperparameters == === Learning rate (alpha) === The learning rate determines to what extent newly acquired information overrides old information. A factor of 0 will make the agent not learn anything, while a factor of 1 would make the agent consider only the most recent information. === Discount factor (gamma) === The discount factor determines the importance of future rewards. A discount factor of 0 makes the agent "opportunistic", or "myopic", e.g., by only considering current rewards, while a factor approaching 1 will make it strive for a long-term high reward. If the discount factor meets or exceeds 1, the Q {\displaystyle Q} values may diverge. === Initial conditions (Q(S0, A0)) === Since SARSA is an iterative algorithm, it implicitly assumes an initial condition before the first update occurs. A high (infinite) initial value, also known as "optimistic initial conditions", can encourage exploration: no matter what action takes place, the update rule causes it to have higher values than the other alternative, thus increasing their choice probability. In 2013 it was suggested that the first reward r {\displaystyle r} could be used to reset the initial conditions. According to this idea, the first time an action is taken the reward is used to set the value of Q {\displaystyle Q} . This allows immediate learning in case of fixed deterministic rewards. This resetting-of-initial-conditions (RIC) approach seems to be consistent with human behavior in repeated binary choice experiments.

  Read more →
• 

  Database-as-IPC

  In computer programming, Database-as-IPC may be considered an anti-pattern where a disk persisted table in a database is used as the message queue store for routine inter-process communication (IPC) or subscribed data processing. If database performance is of concern, alternatives include sockets, network socket, or message queue. British computer scientist, Junade Ali, defined the Database-as-IPC Anti-Pattern as using a database to "schedule jobs or queue up tasks to be completed", noting that this anti-pattern centres around using a database for temporary messages instead of persistent data. == Controversy == The issue arises if there is a performance issue, and if additional systems (and servers) can be justified. In terms of performance, recent advancements in database systems provide more efficient mechanisms for signaling and messaging, and database systems also support memory (non-persisted) tables. There are databases with built-in notification mechanisms, such as PostgreSQL, SQL Server, and Oracle. These mechanisms and future improvements of database systems can make queuing much more efficient and avoid the need to set up a separate signaling or messaging queue system along with the server and management overhead. While MySQL doesn't have direct support for notifications, some workarounds are possible. However, they would be seen as non-standard and therefore more difficult to maintain.

  Read more →
• 

  Multinomial logistic regression

  In statistics, multinomial logistic regression is a classification method that generalizes logistic regression to multiclass problems, i.e. with more than two possible discrete outcomes. That is, it is a model that is used to predict the probabilities of the different possible outcomes of a categorically distributed dependent variable, given a set of independent variables (which may be real-valued, binary-valued, categorical-valued, etc.). Multinomial logistic regression is known by a variety of other names, including polytomous LR, multiclass LR, softmax regression, multinomial logit (mlogit), the maximum entropy (MaxEnt) classifier, and the conditional maximum entropy model. == Background == Multinomial logistic regression is used when the dependent variable in question is nominal (equivalently categorical, meaning that it falls into any one of a set of categories that cannot be ordered in any meaningful way) and for which there are more than two categories. Some examples would be: Which major will a college student choose, given their grades, stated likes and dislikes, etc.? Which blood type does a person have, given the results of various diagnostic tests? In a hands-free mobile phone dialing application, which person's name was spoken, given various properties of the speech signal? Which candidate will a person vote for, given particular demographic characteristics? Which country will a firm locate an office in, given the characteristics of the firm and of the various candidate countries? These are all statistical classification problems. They all have in common a dependent variable to be predicted that comes from one of a limited set of items that cannot be meaningfully ordered, as well as a set of independent variables (also known as features, explanators, etc.), which are used to predict the dependent variable. Multinomial logistic regression is a particular solution to classification problems that use a linear combination of the observed features and some problem-specific parameters to estimate the probability of each particular value of the dependent variable. The best values of the parameters for a given problem are usually determined from some training data (e.g. some people for whom both the diagnostic test results and blood types are known, or some examples of known words being spoken). == Assumptions == The multinomial logistic model assumes that data are case-specific; that is, each independent variable has a single value for each case. As with other types of regression, there is no need for the independent variables to be statistically independent from each other (unlike, for example, in a naive Bayes classifier); however, collinearity is assumed to be relatively low, as it becomes difficult to differentiate between the impact of several variables if this is not the case. If the multinomial logit is used to model choices, it relies on the assumption of independence of irrelevant alternatives (IIA), which is not always desirable. This assumption states that the odds of preferring one class over another do not depend on the presence or absence of other "irrelevant" alternatives. For example, the relative probabilities of taking a car or bus to work do not change if a bicycle is added as an additional possibility. This allows the choice of K alternatives to be modeled as a set of K − 1 independent binary choices, in which one alternative is chosen as a "pivot" and the other K − 1 compared against it, one at a time. The IIA hypothesis is a core hypothesis in rational choice theory; however numerous studies in psychology show that individuals often violate this assumption when making choices. An example of a problem case arises if choices include a car and a blue bus. Suppose the odds ratio between the two is 1 : 1. Now if the option of a red bus is introduced, a person may be indifferent between a red and a blue bus, and hence may exhibit a car : blue bus : red bus odds ratio of 1 : 0.5 : 0.5, thus maintaining a 1 : 1 ratio of car : any bus while adopting a changed car : blue bus ratio of 1 : 0.5. Here the red bus option was not in fact irrelevant, because a red bus was a perfect substitute for a blue bus. If the multinomial logit is used to model choices, it may in some situations impose too much constraint on the relative preferences between the different alternatives. It is especially important to take into account if the analysis aims to predict how choices would change if one alternative were to disappear (for instance if one political candidate withdraws from a three candidate race). Other models like the nested logit or the multinomial probit may be used in such cases as they allow for violation of the IIA. == Model == === Introduction === There are multiple equivalent ways to describe the mathematical model underlying multinomial logistic regression. This can make it difficult to compare different treatments of the subject in different texts. The article on logistic regression presents a number of equivalent formulations of simple logistic regression, and many of these have analogues in the multinomial logit model. The idea behind all of them, as in many other statistical classification techniques, is to construct a linear predictor function that constructs a score from a set of weights that are linearly combined with the explanatory variables (features) of a given observation using a dot product: score ⁡ ( X i , k ) = β k ⋅ X i , {\displaystyle \operatorname {score} (\mathbf {X} _{i},k)={\boldsymbol {\beta }}_{k}\cdot \mathbf {X} _{i},} where Xi is the vector of explanatory variables describing observation i, βk is a vector of weights (or regression coefficients) corresponding to outcome k, and score(Xi, k) is the score associated with assigning observation i to category k. In discrete choice theory, where observations represent people and outcomes represent choices, the score is considered the utility associated with person i choosing outcome k. The predicted outcome is the one with the highest score. The difference between the multinomial logit model and numerous other methods, models, algorithms, etc. with the same basic setup (the perceptron algorithm, support vector machines, linear discriminant analysis, etc.) is the procedure for determining (training) the optimal weights/coefficients and the way that the score is interpreted. In particular, in the multinomial logit model, the score can directly be converted to a probability value, indicating the probability of observation i choosing outcome k given the measured characteristics of the observation. This provides a principled way of incorporating the prediction of a particular multinomial logit model into a larger procedure that may involve multiple such predictions, each with a possibility of error. Without such means of combining predictions, errors tend to multiply. For example, imagine a large predictive model that is broken down into a series of submodels where the prediction of a given submodel is used as the input of another submodel, and that prediction is in turn used as the input into a third submodel, etc. If each submodel has 90% accuracy in its predictions, and there are five submodels in series, then the overall model has only 0.95 = 59% accuracy. If each submodel has 80% accuracy, then overall accuracy drops to 0.85 = 33% accuracy. This issue is known as error propagation and is a serious problem in real-world predictive models, which are usually composed of numerous parts. Predicting probabilities of each possible outcome, rather than simply making a single optimal prediction, is one means of alleviating this issue. === Setup === The basic setup is the same as in logistic regression, the only difference being that the dependent variables are categorical rather than binary, i.e. there are K possible outcomes rather than just two. The following description is somewhat shortened; for more details, consult the logistic regression article. ==== Data points ==== Specifically, it is assumed that we have a series of N observed data points. Each data point i (ranging from 1 to N) consists of a set of M explanatory variables x1,i ... xM,i (also known as independent variables, predictor variables, features, etc.), and an associated categorical outcome Yi (also known as dependent variable, response variable), which can take on one of K possible values. These possible values represent logically separate categories (e.g. different political parties, blood types, etc.), and are often described mathematically by arbitrarily assigning each a number from 1 to K. The explanatory variables and outcome represent observed properties of the data points, and are often thought of as originating in the observations of N "experiments" — although an "experiment" may consist of nothing more than gathering data. The goal of multinomial logistic regression is to construct a model that explains the relationship between the explanatory variables and the outcome, so tha

  Read more →
• 

  Induction of regular languages

  In computational learning theory, induction of regular languages refers to the task of learning a formal description (e.g. grammar) of a regular language from a given set of example strings. Although E. Mark Gold has shown that not every regular language can be learned this way (see language identification in the limit), approaches have been investigated for a variety of subclasses. They are sketched in this article. For learning of more general grammars, see Grammar induction. == Definitions == A regular language is defined as a (finite or infinite) set of strings that can be described by one of the mathematical formalisms called "finite automaton", "regular grammar", or "regular expression", all of which have the same expressive power. Since the latter formalism leads to shortest notations, it shall be introduced and used here. Given a set Σ of symbols (a.k.a. alphabet), a regular expression can be any of ∅ (denoting the empty set of strings), ε (denoting the singleton set containing just the empty string), a (where a is any character in Σ; denoting the singleton set just containing the single-character string a), r + s (where r and s are, in turn, simpler regular expressions; denoting their set's union) r ⋅ s (denoting the set of all possible concatenations of strings from r's and s's set), r + (denoting the set of n-fold repetitions of strings from r's set, for any n ≥ 1), or r (similarly denoting the set of n-fold repetitions, but also including the empty string, seen as 0-fold repetition). For example, using Σ = {0,1}, the regular expression (0+1+ε)⋅(0+1) denotes the set of all binary numbers with one or two digits (leading zero allowed), while 1⋅(0+1)⋅0 denotes the (infinite) set of all even binary numbers (no leading zeroes). Given a set of strings (also called "positive examples"), the task of regular language induction is to come up with a regular expression that denotes a set containing all of them. As an example, given {1, 10, 100}, a "natural" description could be the regular expression 1⋅0, corresponding to the informal characterization "a 1 followed by arbitrarily many (maybe even none) 0's". However, (0+1) and 1+(1⋅0)+(1⋅0⋅0) is another regular expression, denoting the largest (assuming Σ = {0,1}) and the smallest set containing the given strings, and called the trivial overgeneralization and undergeneralization, respectively. Some approaches work in an extended setting where also a set of "negative example" strings is given; then, a regular expression is to be found that generates all of the positive, but none of the negative examples. == Lattice of automata == Dupont et al. have shown that the set of all structurally complete finite automata generating a given input set of example strings forms a lattice, with the trivial undergeneralized and the trivial overgeneralized automaton as bottom and top element, respectively. Each member of this lattice can be obtained by factoring the undergeneralized automaton by an appropriate equivalence relation. For the above example string set {1, 10, 100}, the picture shows at its bottom the undergeneralized automaton Aa,b,c,d in grey, consisting of states a, b, c, and d. On the state set {a,b,c,d}, a total of 15 equivalence relations exist, forming a lattice. Mapping each equivalence E to the corresponding quotient automaton language L(Aa,b,c,d / E) obtains the partially ordered set shown in the picture. Each node's language is denoted by a regular expression. The language may be recognized by quotient automata w.r.t. different equivalence relations, all of which are shown below the node. An arrow between two nodes indicates that the lower node's language is a proper subset of the higher node's. If both positive and negative example strings are given, Dupont et al. build the lattice from the positive examples, and then investigate the separation border between automata that generate some negative example and such that do not. Most interesting are those automata immediately below the border. In the picture, separation borders are shown for the negative example strings 11 (green), 1001 (blue), 101 (cyan), and 0 (red). Coste and Nicolas present an own search method within the lattice, which they relate to Mitchell's version space paradigm. To find the separation border, they use a graph coloring algorithm on the state inequality relation induced by the negative examples. Later, they investigate several ordering relations on the set of all possible state fusions. Kudo and Shimbo use the representation by automaton factorizations to give a unique framework for the following approaches (sketched below): k-reversible languages and the "tail clustering" follow-up approach, Successor automata and the predecessor-successor method, and pumping-based approaches (framework-integration challenged by Luzeaux, however). Each of these approaches is shown to correspond to a particular kind of equivalence relations used for factorization. == Approaches == === k-reversible languages === Angluin considers so-called "k-reversible" regular automata, that is, deterministic automata in which each state can be reached from at most one state by following a transition chain of length k. Formally, if Σ, Q, and δ denote the input alphabet, the state set, and the transition function of an automaton A, respectively, then A is called k-reversible if: ∀a0, ..., ak ∈ Σ ∀s1, s2 ∈ Q: δ(s1, a0...ak) = δ(s2, a0...ak) ⇒ s1 = s2, where δ means the homomorphic extension of δ to arbitrary words. Angluin gives a cubic algorithm for learning of the smallest k-reversible language from a given set of input words; for k = 0, the algorithm has even almost linear complexity. The required state uniqueness after k + 1 given symbols forces unifying automaton states, thus leading to a proper generalization different from the trivial undergeneralized automaton. This algorithm has been used to learn simple parts of English syntax; later, an incremental version has been provided. Another approach based on k-reversible automata is the tail clustering method. === Successor automata === From a given set of input strings, Vernadat and Richetin build a so-called successor automaton, consisting of one state for each distinct character and a transition between each two adjacent characters' states. For example, the singleton input set {aabbaabb} leads to an automaton corresponding to the regular expression (a+⋅b+). An extension of this approach is the predecessor-successor method which generalizes each character repetition immediately to a Kleene + and then includes for each character the set of its possible predecessors in its state. Successor automata can learn exactly the class of local languages. Since each regular language is the homomorphic image of a local language, grammars from the former class can be learned by lifting, if an appropriate (depending on the intended application) homomorphism is provided. In particular, there is such a homomorphism for the class of languages learnable by the predecessor-successor method. The learnability of local languages can be reduced to that of k-reversible languages. === Early approaches === Chomsky and Miller (1957) used the pumping lemma: they guess a part v of an input string uvw and try to build a corresponding cycle into the automaton to be learned; using membership queries they ask, for appropriate k, which of the strings uw, uvvw, uvvvw, ..., uvkw also belongs to the language to be learned, thereby refining the structure of their automaton. In 1959, Solomonoff generalized this approach to context-free languages, which also obey a pumping lemma. === Cover automata === Câmpeanu et al. learn a finite automaton as a compact representation of a large finite language. Given such a language F, they search a so-called cover automaton A such that its language L(A) covers F in the following sense: L(A) ∩ Σ≤ l = F, where l is the length of the longest string in F, and Σ≤ l denotes the set of all strings not longer than l. If such a cover automaton exists, F is uniquely determined by A and l. For example, F = {ad, read, reread } has l = 6 and a cover automaton corresponding to the regular expression (r⋅e)⋅a⋅d. For two strings x and y, Câmpeanu et al. define x ~ y if xz ∈ F ⇔ yz ∈ F for all strings z of a length such that both xz and yz are not longer than l. Based on this relation, whose lack of transitivity causes considerable technical problems, they give an O(n4) algorithm to construct from F a cover automaton A of minimal state count. Moreover, for union, intersection, and difference of two finite languages they provide corresponding operations on their cover automata. Păun et al. improve the time complexity to O(n2). === Residual automata === For a set S of strings and a string u, the Brzozowski derivative u−1S is defined as the set of all rest-strings obtainable from a string in S by cutting off its prefix u (if possible), formally: u−1S = {v ∈ Σ: uv ∈ S}, cf. picture. Denis et al. define a

  Read more →