AI Avatar Generator From Photo

AI Avatar Generator From Photo — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Elowan

    Elowan

    Elowan is a plant-robot cyborg. Using its own internal bioelectrical signals, The plant has a robotic extension that makes it move towards light sources. Electrodes are inserted into the leaves, stem, and ground to detect the faint bioelectrical signals the plant produces. Then they are amplified so the robot can read them. So when the plant "wants" to go to light, the cyborg automatically goes to the nearest light source. Future extensions of the robot could provide: Protection, growth frameworks, and nutrients. Other factors that could make the cyborg move are temperature, soil, and gravity conditions Elowan is one in a series of plant-electronic hybrid experiments.

    Read more →
  • Passenger drone

    Passenger drone

    A passenger drone is an autonomous aircraft that is designed to carry a small number of passengers to a destination. In 2021, Ehang, a technology company based in Guangzhou, China, developed the Ehang 184, the world's first passenger drone. == History == Unmanned aerial vehicles were first introduced in World War 1, when Britain first developed the Aerial Target, an aircraft controlled remotely through radio signals. A year later in the United States, testing of Kettering Bug, a 12-foot long biplane attached with a bomb and that launched via a “slingshot-like rail”, was also under progress. Both of their unreliable test results and their possibility of endangering friendly troops in deployment caused neither aircraft to be used during the war. Production of UAVs continued after World War I and into World War II and the Vietnam War, where they would be invaluable in assisting with training as well as reconnaissance. Late 20th century also saw the proposition and development of unique methods of travel, including personal jetpacks and even flying cars. While the previously mentioned are not drones, they serve as a precursor and foundation for the passenger drones of today. The first passenger drone was unveiled on January 6 of 2016 at the international Consumer Electronics Show (CES) in Las Vegas. Produced by Ehang, a Chinese company based in Guangzhou, the 184 was a one passenger drone equipped with four propellers that could fly for approximately 23 minutes at a top speed of 63 mph. Since then, many new companies have entered the market, but none yet have been accessible by the public. == Technological development == Since 2013, improvements in designs to wing structures have contributed to the economic feasibility of passenger drones. New structural advancements, such as the flapping-wing propulsion system based on the mechanisms of birds’ wings, are more available as they have proven their capabilities in laboratory testing. As of September 29th, 2015, most market-ready drones are delivery drones with a carrying capacity limited to small packages - with a typical max capacity of under 5 pounds. However, while the technology exists for drones with larger carrying capacities, specifically those capable of carrying multiple humans, the execution of this technology is not yet market accessible. This capacity limit must be addressed for passenger drones; given current designs strive to carry a maximum of 5 people. However, some estimates believe that passengers drones could become a reality, specifically for paid transportation and emergency purposes, as early as 2026. With implementation of this technology, there could be significant effects on ground traffic including reducing gridlock in heavily congested areas and conserving up to 15% of the fuel currently used in heavy traffic patterns. However, extensive growth of the passenger drone market also risks clouding the low-altitude airspace and causing new safety risks. However, this concern is being addressed by recent advancements in the Internet of Drones (IoD) which links drones together to ensure appropriate pathing and reduce mid-air collisions. While this brings additional security issues, including maintaining reliable communication channels in the case of technological failure, researchers hope that this will help reduce crashes that can result in damage to passengers, buildings, and people in and around the airspace. == Notable companies == Ehang is a Chinese company that has developed numerous drones including passenger plane Ehang 184. EHang 184 was their first model, developed as an eight dual rotor wing blade drone that can carry two passengers. The model was retired in 2020 and is replaced by the Ehang 216. Ehang also released a one passenger drone, Ehang 116. Ehang in 2021 unveiled the model VT-30. VT-30 is designed to have eight dual rotor wing blades to complement its fixed wing platform. Flyastro, a Texas-based drone company, developed the Astro ALTA, with two and four person passenger models. The company is known for being the first to develop a solar-powered airplane. The development team initially began with the model, Elroy. It was a two passenger drone with similar design to the ALTA. Once flight was achieved, the model Astro ALTA began development. Joby Aviation is a California based company that has developed a five passenger drone, with one seat for the pilot. The company expects to complete its FAA certification process 2022. Joby in 2020 acquired a 75 million dollar investment from service provider Uber Technologies Inc., leading to Uber Elevate and Expands partnership. Archer Aviation is a California-based company that has developed a two passenger model called Maker. It has fixed wings with twelve rotor wings. Archer is developing five person model. United Airlines has partnered with Archer for commercial sale of the model, Maker. Maker is expected to be released within Los Angeles and Miami by 2024. CityAirbus is a drone project developed by Airbus, a European multinational aerospace company, based in the Netherlands. CityAirbus has developed a four- person passenger drone with fixed wings that include rotor wing blades. Its expected certification for public flight is in 2025. Boeing, an American multinational aviation corporation is developing a passenger drone model called the Passenger Air Vehicle (PAV). The model is a fixed wing with eight rotor blade wings attached onto a platform underneath the base structure. This model can hold two passengers and still is in development. Volocopter is a German aircraft manufacturer that is developing a passenger drone called Volocity. The model consist of eighteen rotor wings above the cockpit on a circular ring. Japan Airlines, an investor of Volocopter plans to have public test in Japan as early as 2023. == Future use == === Potential benefits === Passenger drones can greatly reduce the time for travel. As passenger drones flight paths are not restricted by conventional roads, the travel distance is shortened. Current ventures such as Joby Aviation, after acquiring Uber Air, plan to take advantage of this technology in the form of air taxis. Other potential benefits include the use of passenger drones by emergency services such as search and rescue missions and the delivery of life saving goods. Companies like Ehang have already begun using passenger drones as emergency vehicles as a response to the potential river collapses during the flood season in China. === Concerns === Passenger and air traffic safety remains at the forefront of concerns. Regulations for air traffic centered around passenger drones are still underway and would continue to develop with increasing use cases for passenger drones. Remote security threats on commercial drones such as Man-In-The-Middle (MITM) attack have also exposed the vulnerabilities in current drone systems. Among American adults, 54 percent say that they would feel unsafe flying inside a passenger drone. Passenger drones can be very noisy; a single passenger drone such as Joby Aviation’s all-electric vertical take-off and landing (“eVTOL”) aircraft has an estimated noise production of 70 decibels (dB), a noise level equating to “loud traffic”.

    Read more →
  • Apps to analyse COVID-19 sounds

    Apps to analyse COVID-19 sounds

    Apps to analyse COVID-19 sounds are mobile software applications designed to collect respiratory sounds and aid diagnosis in response to the COVID-19 pandemic. Numerous applications are in development, with different institutions and companies taking various approaches to privacy and data collection. Current efforts are aimed at gathering data. In a later stage, it is possible that sound apps will have the capacity (and ethical approvals) to provide information back to users. In order to develop and train signal analysis approaches, large datasets are required. == History == The COVID-19 outbreak was announced as a global pandemic by the World Health Organization in March 2020 and has affected a growing number of people globally. In this context, advanced artificial intelligence techniques are being considered as tools in aiding our response to global health crisis. Other COVID-19 apps which offer solutions for user tracking have been developed. At the same time a number of approaches which tries to use respiratory sounds and artificial intelligence to understand if the disease can be diagnosed have been proposed. A few studies are available as preprints (i.e. not yet peer-reviewed) documents. == Methodologies == The potential for using speech and sound analysis by artificial intelligence to help in this scenario, by surveying which types of related or contextually significant phenomena can be automatically assessed from speech or sound has been recently overviewed. These include the automatic recognition and monitoring of breathing, dry and wet coughing or sneezing sounds, speech under cold, eating behaviour, sleepiness, or pain. Additionally, the potential use-cases of intelligent speech analysis for COVID-19 diagnosed patients has also been presented. In particular, by analysing speech recordings from these patients, an audio-only-based model to automatically categorise the health state of patients from four aspects, including the severity of illness, sleep quality, fatigue, and anxiety, is constructed. This work shows promise in estimating the severity of illness. Machine learning methods have been explored to recognize and diagnose coughs from different diseases. These included a low complexity, automated recognition and diagnostic tool for screening respiratory infections that utilizes convolutional neural networks (CNNs) to detect cough within environment audio and diagnose three potential illnesses (i.e. bronchitis, bronchiolitis and pertussis) based on their unique cough audio features. A large-scale crowdsourced dataset of respiratory sounds has been collected to aid diagnosis of COVID-19: coughs and breathing sounds are sufficient to distinguish users affected by COVID-19 versus those affected by asthma or healthy controls. Behind these studies is the ambition that automated systems to screen for respiratory diseases based on voice, raw cough or other sound data would have positive medical applications in both clinical and public health arenas. == List of apps to analyse COVID-19 sounds ==

    Read more →
  • Eat App

    Eat App

    Eat App is a global restaurant technology company that provides a cloud-based management platform for restaurants, hotels, and other venues. The platform enables venues to accept online reservations seamlessly, manage tables, and enhance customer relationship management (CRM). It utilizes AI to improve operational efficiency, provides marketing automation, and helps build a comprehensive guestbook. The company also offers a consumer app and website for discovering and booking restaurant tables online. According to the company, the system has seated over 100 million guests, and the number continues to grow. Eat was founded by Nezar Kadhem and David Feuillard in 2015 and has raised $13M to date from Silicon Valley's 500 startups, Middle East Venture Partners (MEVP), Derayah VC, amongst other business angels. The company is currently operational across the world, with offices in Dubai and the United States. == Product overview == === For restaurants === Eat App’s reservation system allows for a digital record of all reservations, all guests that have previously visited the restaurant, as well as analytics on the performance of the restaurant. The table management feature simplifies traditional restaurant operations by providing a live snapshot of current status, seating optimization, and shift management. The CRM and analytics suite gathers and monitors data to build a segmented guestbook for personalized marketing and provides dashboards for data-driven decision-making. Additionally, the review feature makes it easy for restaurants to automatically collect reviews from their guests. Additionally, Eat App includes a chit printer function that seamlessly prints reservation details at host stands and a review management feature that allows restaurants to manage online reviews directly within the platform. == History == In February 2015, Eat App raised $300k from Bahrain-based business angel group TENMOU. In June 2018, Eat raised $1.2 million from Dubai-based Middle East Venture Partners (MEVP). In February 2020, Eat App raised $5 million in a Series B funding round led by 500 Startups, Derayah Venture Fund, and MEVP, with participation from a few angel investors and family members. In February 2021, Eat App launched its technology with The Emaar Hospitality Group, implementing it across over 50 restaurants in Emaar properties and hotels. The cloud-based system runs natively on iPads in each restaurant, providing Emaar staff access to reservations and guest information, and integrates with the U by Emaar loyalty app to personalize service. On September 28, 2022, Eat App announced the closing of an $11 million Series B funding round. The investment was led by Middle East Venture Partners (MEVP), 500 Startups, Derayah Venture Capital, Dallah Albaraka, Ali Zaid Al Quraishi & Brothers Company, and Rasameel Investment Company, with participation from existing investors.

    Read more →
  • Boundary vector field

    Boundary vector field

    The boundary vector field (BVF) is an external force for parametric active contours (i.e. Snakes). In the fields of computer vision and image processing, parametric active contours are widely used for segmentation and object extraction. The active contours move progressively towards its target based on the external forces. There are a number of shortcomings in using the traditional external forces, including the capture range problem, the concave object extraction problem, and high computational requirements. The BVF is generated by an interpolation scheme which reduces the computational requirement significantly, and at the same time, improves the capture range and concave object extraction capability. The BVF is also tested in moving object tracking and is proven to provide fast detection method for real time video applications.

    Read more →
  • International Speech Communication Association

    International Speech Communication Association

    The International Speech Communication Association (ISCA) is a non-profit organization and one of the two main professional associations for speech communication science and technology, the other association being the IEEE Signal Processing Society. == Purpose == The purpose of the International Speech Communication Association (ISCA) is to promote the study and application of automatic speech processing, including speech recognition and synthesis, as well as related areas such as speaker recognition and speech compression. The association's activities cover all aspects of speech processing, including computational, linguistic, and theoretical aspects. The primary goal of the International Speech Communication Association (ISCA) is to advance the field of automatic speech processing and communication technology through research, education, and collaboration. By promoting the study and application of speech technologies such as speech recognition, speech synthesis, speaker recognition, and speech compression, ISCA aims to foster innovation and development in the areas of human-computer interaction, telecommunications, and multimedia applications. ISCA serves as a platform for researchers, academics, industry professionals, and students to exchange knowledge, share best practices, and foster interdisciplinary dialogue in the field of speech communication science. Through conferences, workshops, publications, and educational initiatives, ISCA seeks to enhance the understanding of speech processing mechanisms, improve the accuracy and efficiency of speech technologies, and explore new frontiers in the realm of human language communication. Furthermore, ISCA plays a crucial role in promoting international collaboration and networking among professionals in the speech communication community. By facilitating partnerships and cooperation between individuals and organizations worldwide, ISCA seeks to drive global progress in speech technology research and application, ultimately contributing to the advancement of communication systems, accessibility tools, and interactive interfaces that benefit society as a whole. == Conferences == ISCA organizes yearly the Interspeech conference. Most recent Interspeech: 2013 Lyon, France 2014 Singapore 2015 Dresden, Germany 2016 San Francisco, US 2017 Stockholm, Sweden 2018 Hyderabad, India 2019 Graz, Austria 2020 Shanghai, China (fully virtual) 2021 Brno, Czechia (hybrid) 2022 Incheon, South Korea 2023 Dublin, Ireland 2023 Kos Island, Greece Forthcoming Interspeech: 2025 Rotterdam, the Netherlands == ISCA board == The ISCA president for 2023-2025 is Odette Scharenborg. The vice president is Bhuvana Ramabhadran and the other members are professionals in the field. == History of ISCA == The precursor to Interspeech was a conference called Eurospeech, first held in 1989 and organised by Jean-Pierre Tubach. It was the conference of the European Speech Communication Association (ESCA), itself the precursor of the International Speech Communication Association (ISCA). A year later another conference on speech science and technology was started: the International Conference on Spoken Language Processing (ICSLP), which was founded in 1990 by Hiroya Fujisaki. The first ISCA (vs. ESCA) event was the merging of Eurospeech and ICSLP to create ICSLP-Interspeech, held in Beijing, China in 2000. This was followed by Eurospeech-Interspeech, which was held in Aalborg, Denmark in 2001. In 2007, the Eurospeech and ICSLP parts of the conference names were dropped and Interspeech became the name of the yearly conference (first Interspeech location: Antwerp, Belgium).

    Read more →
  • Open-source robotics

    Open-source robotics

    Open-source robotics is a branch of robotics where robots are developed with open-source hardware and free and open-source software, publicly sharing blueprints, schematics, and source code. It is thus closely related to the open design movement, the maker movement and open science. == Requirements == Open source robotics means that information about the hardware is easily discerned, so that others can easily rebuild it. In turn, this requires design to use only easily available standard subcomponents and tools, and for the build process to be documented in detail including a bill of materials and detailed ('Ikea style') step-by-step building and testing instructions. (A CAD file alone is not sufficient, as it does not show the steps for performing or testing the build). These requirements are standard to open source hardware in general, and are formalised by various licences, certifications, especially those defined by the peer-reviewed journals Journal of Open Hardware and HardwareX. Licensing requirements for software are the same as for any open source software. But in addition, for software components to be of practical use in real robot systems, they need to be compatible with other software, usually as defined by some robotics middleware community standard. == Hardware systems == Applications to date include: Robot arms, e.g. PARA or Thor Wheeled mobile robots. e.g. OpenScout Four-legged robots such as the Open Dynamic Robot Initiative UAV quadcopters (drones) such as Agilicious Humanoid robots, e.g. iCub, Berkeley Humanoid Lite Self-driving cars, e.g. OpenPodcar (→ Personal rapid transit) Submersible robots, eg. OpenFish Laboratory robotics such as chemical liquid handling Vertical farming Swarm robots, e.g. HeRoSwarm Domestic tasks: vacuum cleaning, floor washing and grass mowing Robot sports including robot combat and autonomous racing Education == Hardware subcomponents == Most open source hardware definitions allow non-open subcomponents to be used in modular design, as long as they are easily available. However many designs try to push openness down into as many subcomponents as possible, with the aim of ultimately reaching fully open designs. Open hardware manual-drive vehicles and their subcomponents, such as from Open Source Ecology, are often used as starting points and extended with automation systems. Open subcomponents can include open-source computing hardware as subcomponents, such as Arduino and RISC-V, as well as open source motors and drivers such as the Open Source Motor Controller and ODrive. Open hardware robotics interface boards can simplify interfacing between middleware software and physical hardware. == Software subcomponents == === Middleware === Robotics middleware is software which links multiple other software components together. In robotics, this specifically means real-time communication systems with standardized message passing protocols. The predominant open source middleware is ROS2, the robot operating system, now as version 2. Other alternatives include ROS1, YARP — used in the iCub, URBI, and Orca. Open source middleware is usually run on an open source operating system, especially the Ubuntu distribution of Linux. === Driver software === Most robot sensors and actuators require software drivers. There is little standardization of open source software at this level, because each hardware device is different. Creating open drivers for closed hardware is difficult as it requires both low level programming and reverse engineering. === Simulation software === Open source robotics simulators include Gazebo, MuJoCo and Webots. Open source 3D game engines such as Godot are also sometimes used as simulators, when equipped with suitable middleware interfaces. === Automation software === At the level of AI, many standard algorithms have open source software implementations, mostly in ROS2. Major components include: Machine vision systems such as the YOLO object detector. 3D photogrammetry Navigation including SLAM and planning such as nav2 Arm inverse kinematics such as moveIt2 == Community == The first signs of the increasing popularity of building and sharing robot designs were found with the maker culture community. What began with small competitions for remote operated vehicles (e.g. Robot combat), soon developed to the building of autonomous telepresence robots such as Sparky and then true robots (being able to take decisions themselves) as the Open Automaton Project. Several commercial companies now also produce kits for making simple robots. The community has adopted open source hardware licenses, certifications, and peer-reviewed publications, which check that source has been made correctly and permanently available under community definitions, and which validate that this has been done. These processes have become critically important due to many historical projects claiming to be open source but them reverting on the promise due to commercialisation or other pressures. As with other forms of open source hardware, the community continues to debate precise criteria for 'ease of build'. A common standard is that designs should be buildable by a technical university student, in a few days, using typical fablab tools, but definitions of all of these subterms can also be debated. Compared to other forms of open source hardware, open source robotics typically includes a large software element, so involves software as well as hardware engineers. Open source concepts are more established in open source software than hardware, so robotics is a field in which those concepts can be shared and transferred from software to hardware. While the community in open source robotics is multi-faceted with a wide range of backgrounds, a sizable sub-community uses the ROS middleware and meets at the ROSCon conferences to discuss development of ROS itself and automation components built on it.

    Read more →
  • Bitstrips

    Bitstrips

    Bitstrips, Inc. was a Canadian media and technology company based in Toronto, founded in 2007 by Jacob Blackstock, David Kennedy, Shahan Panth, Dorian Baldwin, and Jesse Brown. The company created and offered a web application, Bitstrips.com, which allowed users to create comic strips using personalized avatars, and preset templates and poses. Brown and Blackstock explained that the service was meant to enable self-expression without the need to have artistic skills. Bitstrips was first presented in 2008 at South by Southwest in Austin, Texas, and the service later piloted and launched a version designed for use as educational software. The service achieved increasing prominence following the launch of versions for Facebook and mobile platforms. In 2014, Bitstrips launched a spin-off app known as Bitmoji, which allows users to create personalized stickers for use in instant messaging. In July 2016, Snapchat Inc. announced that it had acquired the company; the Bitstrips comic service was shut down, but Bitmoji remains operational, and has subsequently been given greater prominence within Snapchat's overall platform. == History == Bitstrips was co-developed by Toronto-based comic artist Jacob Blackstock and his high school friend, journalist Jesse Brown. The service was originally envisioned as a means to allow anyone to create their own comic strip without needing artistic skills. Brown explained that "it's so difficult and time-consuming to tell a story in comic book form, drawing the same characters again and again in these tiny little panels, and just the amount of craftsmanship required. And even if you can do it well, which I never could, it takes years to make a story." Brown stated that the service would be "groundwork for a whole new way to communicate", and went as far as describing the service as being a "YouTube for comics". Blackstock explained that the concept of Bitstrips was influenced by his own use of comics as a form of socialization; a student, Blackstock and his friends drew comics featuring each other and shared them during classes. He felt that Bitstrips was a "medium for self-expression", stating that "It's not just about you making the comics, but since you and your friends star in these comics, it's like you're the medium. The visual nature of comics just speaks so much louder than text." The service was publicly unveiled at South by Southwest in 2008. In 2009, the service introduced a version oriented towards the educational market, Bitstrips for Schools, which was initially piloted at a number of schools in Ontario. The service was praised by educators for being engaging to students, especially within language classes. Brown noted that students were using the service to create comics outside of class as well, stating that it was "so gratifying and shocking what people do with your tool to make their own stories in ways that you never would have anticipated. Some of them are just brilliant." In December 2012, Bitstrips launched a version for Facebook; by July 2013, Bitstrips had 10 million unique users on Facebook, having created over 50 million comics. In October 2013, Bitstrips launched a mobile app; in two months, Bitstrips became a top-downloaded app in 40 countries, and over 30 million avatars had been created with it. In November 2013, Bitstrips secured a round of funding from Horizons Ventures and Li Ka-shing. In October 2014, Bitstrips launched Bitmoji, a spin-off app that allows users to create stickers featuring Bitstrips characters in various templates. In July 2016, following unconfirmed reports earlier in the year, Snapchat Inc. announced that it had acquired Bitstrips. The company's staff continue to operate out of Toronto, but the original Bitstrips comic service was shut down in favour of focusing exclusively on Bitmoji, leaving many Bitstrips users to call for a reboot of the comic service.

    Read more →
  • History of natural language processing

    History of natural language processing

    The history of natural language processing describes the advances of natural language processing. There is some overlap with the history of machine translation, the history of speech recognition, and the history of artificial intelligence. == Early history == The history of machine translation dates back to the seventeenth century, when philosophers such as Leibniz and Descartes put forward proposals for codes which would relate words between languages. All of these proposals remained theoretical, and none resulted in the development of an actual machine. The first patents for "translating machines" were applied for in the mid-1930s. One proposal, by Georges Artsrouni, was simply an automatic bilingual dictionary using paper tape. The other proposal, by Peter Troyanskii, a Russian, was more detailed. Troyanskii’s proposal included both the bilingual dictionary and a method for dealing with grammatical roles between languages, based on Esperanto. == Logical period == In 1950, Alan Turing published his famous article "Computing Machinery and Intelligence" which proposed what is now called the Turing test as a criterion of intelligence. This criterion depends on the ability of a computer program to impersonate a human in a real-time written conversation with a human judge, sufficiently well that the judge is unable to distinguish reliably — on the basis of the conversational content alone — between the program and a real human. In 1957, Noam Chomsky’s Syntactic Structures revolutionized Linguistics with 'universal grammar', a rule-based system of syntactic structures. The Georgetown experiment in 1954 involved fully automatic translation of more than sixty Russian sentences into English. The authors claimed that within three or five years, machine translation would be a solved problem. However, real progress was much slower, and after the ALPAC report in 1966, which found that ten years long research had failed to fulfill the expectations, funding for machine translation was dramatically reduced. Little further research in machine translation was conducted until the late 1980s, when the first statistical machine translation systems were developed. Some notably successful NLP systems developed in the 1960s were SHRDLU, a natural language system working in restricted "blocks worlds" with restricted vocabularies. In 1969 Roger Schank introduced the conceptual dependency theory for natural language understanding. This model, partially influenced by the work of Sydney Lamb, was extensively used by Schank's students at Yale University, such as Robert Wilensky, Wendy Lehnert, and Janet Kolodner. In 1970, William A. Woods introduced the augmented transition network (ATN) to represent natural language input. Instead of phrase structure rules ATNs used an equivalent set of finite-state automata that were called recursively. ATNs and their more general format called "generalized ATNs" continued to be used for a number of years. During the 1970s many programmers began to write 'conceptual ontologies', which structured real-world information into computer-understandable data. Examples are MARGIE (Schank, 1975), SAM (Cullingford, 1978), PAM (Wilensky, 1978), TaleSpin (Meehan, 1976), QUALM (Lehnert, 1977), Politics (Carbonell, 1979), and Plot Units (Lehnert 1981). During this time, many chatterbots were written including PARRY, Racter, and Jabberwacky. == Statistical period == Up to the 1980s, most NLP systems were based on complex sets of hand-written rules. Starting in the late 1980s, however, there was a revolution in NLP with the introduction of machine learning algorithms for language processing. This was due both to the steady increase in computational power resulting from Moore's law and the gradual lessening of the dominance of Chomskyan theories of linguistics (e.g. transformational grammar), whose theoretical underpinnings discouraged the sort of corpus linguistics that underlies the machine-learning approach to language processing. Some of the earliest-used machine learning algorithms, such as decision trees, produced systems of hard if-then rules similar to existing hand-written rules. Increasingly, however, research has focused on statistical models, which make soft, probabilistic decisions based on attaching real-valued weights to the features making up the input data. The cache language models upon which many speech recognition systems now rely are examples of such statistical models. Such models are generally more robust when given unfamiliar input, especially input that contains errors (as is very common for real-world data), and produce more reliable results when integrated into a larger system comprising multiple subtasks. === Datasets === The emergence of statistical approaches was aided by both increase in computing power and the availability of large datasets. At that time, large multilingual corpora were starting to emerge. Notably, some were produced by the Parliament of Canada and the European Union as a result of laws calling for the translation of all governmental proceedings into all official languages of the corresponding systems of government. Many of the notable early successes occurred in the field of machine translation. In 1993, the IBM alignment models were used for statistical machine translation. Compared to previous machine translation systems, which were symbolic systems manually coded by computational linguists, these systems were statistical, which allowed them to automatically learn from large textual corpora. Though these systems do not work well in situations where only small corpora is available, so data-efficient methods continue to be an area of research and development. In 2001, a one-billion-word large text corpus, scraped from the Internet, referred to as "very very large" at the time, was used for word disambiguation. To take advantage of large, unlabelled datasets, algorithms were developed for unsupervised and self-supervised learning. Generally, this task is much more difficult than supervised learning, and typically produces less accurate results for a given amount of input data. However, there is an enormous amount of non-annotated data available (including, among other things, the entire content of the World Wide Web), which can often make up for the inferior results. == Neural period == Neural language models were developed in 1990s. In 1990, the Elman network, using a recurrent neural network, encoded each word in a training set as a vector, called a word embedding, and the whole vocabulary as a vector database, allowing it to perform such tasks as sequence-predictions that are beyond the power of a simple multilayer perceptron. A shortcoming of the static embeddings was that they didn't differentiate between multiple meanings of homonyms. Yoshua Bengio developed the first neural probabilistic language model in 2000. Novel algorithms, availability of larger datasets and higher processing power made possible training of larger and larger language models. Attention mechanism was introduced by Bahdanau et al. in 2014. This work laid the foundations for the famous "Attention Is All You Need" paper that introduced the Transformer architecture in 2017. The concept of large language model (LLM) emerged in late 2010s. LLM is a language model trained with self-supervised learning on vast amount of text. Earliest public LLMs had hundreds of millions of parameters, but this number quickly rose to billion and even trillions. In recent years, advancements in deep learning and large language models have significantly enhanced the capabilities of natural language processing, leading to widespread applications in areas such as healthcare, customer service, and content generation. == Software ==

    Read more →
  • Colors!

    Colors!

    Colors! is a series of digital painting applications for handheld game consoles and mobile devices. Originally created as a homebrew application for Nintendo DS (as Colors!), which was since legitimately distributed on PlayStation Vita, iOS, and Android, the project eventually evolved into an officially licensed application for Nintendo 3DS (as Colors! 3D) and Nintendo Switch (as Colors Live). == History == === Colors! === Colors! was originally released in June 2007 as a simple homebrew painting application for the Nintendo DS. It was developed by Jens Andersson, a programmer and designer on sabbatical from the games industry who wanted to experiment with the potential of the new handheld platform. Shortly after, Rafał Piasek created an online gallery where users could upload paintings made with the program. Colors! quickly became one of the best-known homebrew applications on the Nintendo DS, and in September 2008, it was also released for the iPhone and iPod Touch. As of August 2010, it had been downloaded almost half a million times. It was voted the most popular homebrew application on the Nintendo DS by readers of the R4 for DS blog. Development of Colors! DS homebrew officially ended in December 2010 although the official gallery still accepted submissions from DS users until 2020 when Colors! Gallery was discontinued. === Colors! 3D === Colors! 3D is a successor to the application Colors! for the Nintendo 3DS. It was released as an officially licensed application for the Nintendo eShop in North America on April 5, 2012, and in the PAL region on April 19, 2012. It was later released in Japan on August 21, 2013, published by Arc System Works. Colors! 3D allows users to draw on five layers, each on their own stereoscopic 3D plane. Drawing is done on the bottom screen, while the top screen displays the painting in 3D. While drawing, players can use the various controls on the Nintendo 3DS to change layers, zoom and pan, and alter the pressure of their brush. Pressing the L button allows users to access a menu to change brush type, size, and opacity, modify the layers, use the camera to provide references, and more. When the user finishes their painting, they can export it to the SD card for viewing in the Nintendo 3DS Camera application. Users can also upload their finished creations to an online gallery, viewed on the 3DS or the official website. Gallery features include hashtags and the ability to follow artists and post comments. Each painting also features a replay feature that allows viewers to see how it was drawn. The application also features local multiplayer, allowing several people to work cooperatively on a painting. In April 2024, the developers of Colors! 3D collaborated with the Pretendo Network project to officially add support for the application, meaning Colors! 3D will continue to operate as normal when using Pretendo Network. ==== Reception ==== IGN gave the application a score of 9.0 and an Editor's Choice award, praising its simple interface and tutorials. Destructoid gave the app a 9.0, calling it "a simple and incredibly fun tool with an amazing community of artists proudly displaying their beautiful and funny 3D images." Nintendo Life gave the app a 9/10, stating, "Though lacking in any structured play, Colors! 3D’s robust free drawing system and unique ability to let anyone create their own three-dimensional artwork more than make up for this." === Colors Live === A Nintendo Switch successor called Colors Live (stylised as Colors L!ve) was released in 2020 after being funded via a Kickstarter campaign. This expanded upon the features of previous installments by adding new brushes, increasing the maximum number of layers to ten, and introducing blend modes. A new game mode called Colors Quest was also included. A pressure-sensitive pen called the Colors SonarPen was developed in collaboration with GreenBulb to facilitate drawing on the Nintendo Switch, and comes pre-bundled with physical copies of the game. ==== Colors Quest ==== This new mode acts as a story-driven adventure wherein players are given a daily drawing challenge with a specific theme and certain stipulations that must be fulfilled. Once the drawing is complete, players must anonymously score other players' submissions, these scores are then aggregated to produce a personal ranking that measures the improvement in the player's art skills over time.

    Read more →
  • RagTime

    RagTime

    RagTime is a frame-oriented business publishing software which combines word processing, spreadsheets, simple drawings, image processing, and charts, in a single document/program, integrated software. It is often used to create forms, reports, documentation, desktop publishing, and in office environments. Typical users are business clients, educational institutions, administrations, architects, and also private users. Ragtime includes the following modules: Page layout (forms, templates etc.) Word processing Image processing Spreadsheets, similar to Microsoft Excel Formulas and functions which can be used throughout, in text, graphics, and spreadsheets Charts in different types of diagrams Drawings in vector graphics including lines, polygons, Bézier curves and more Slide show (presentation of RagTime documents) Audio/video Buttons (pop-up menus, switches, and more) that can be used within RagTime documents Import/export of various file formats Support of the AppleScript scripting language available system-wide under macOS == Principle == RagTime differs from most other comparable programs or software packages in its strict frame-oriented design: all content is contained within frames on each page. The content can have a fixed position within its frame or, if it is text or a spreadsheet, flow into another frame that is connected to the first frame via a so-called “pipeline”. RagTime has no different document types for different types of data; all content is stored in a single compound document type. Thus, a RagTime document not only can contain multiple pages, but also multiple layouts within the same document; e.g. spreadsheets in addition to text and images. The RagTime filename extension is .rtd (RagTime document); for templates the extension is .rtt (RagTime template). The current version is RagTime 6.6.5. It is available for OS X (10.6-10.14) and Windows (XP/Vista/7/8/10). == Extensions == FileTime – allows accessing “FileMaker Pro” databases from RagTime documents under OS X RagTime Connect – ODBC database connection for RagTime 6 (Mac and Windows) Johannes – print extension for the simple creation of stapled or folded brochures, booklets etc. PowerFunctions – additional functions for a more effective creation of intelligent documents for exchanging data and for use in mixed Mac/Windows environments MetaFormula – SYLK-based extension that allows calculating text as formula == History == RagTime has been developed since 1985 for the Macintosh – originally named MacFrame – and was published in 1986. When released, it already had the present name, which was chosen following the then-available software package Lotus Jazz. In the European Macintosh market, RagTime quickly gained a prominent position that continues to this day, even though the market share has decreased. Despite repeated attempts, the program could not gain acceptance in the North American market due to its high cost ($395 in 1990). The North American sales office closed in 1991, shortly after Claris Corporation released ClarisWorks which duplicated much of the functionality of RagTime for a lower price. After the manufacturer – first Brüning & Everth, followed by B&E Software and today RagTime.de Development – had focused on the Macintosh only for a very long time, it also released a Windows version, RagTime 5.0, in 1999. However, the program could not assume great significance against established competitors, especially Microsoft Office. Until mid-2006 RagTime was, in addition to the commercial version, also available as a free version (RagTime Solo) for personal use. RagTime Solo included the same features and performance (except for spelling and Syllabification) dictionaries), but was not allowed for use in commercial environments. In other languages RagTime Solo was distributed as RagTime Privat. In a press release from July 5, 2006, RagTime announced the discontinuation of RagTime Solo: “… the RagTime Solo license conditions were often misinterpreted or deliberately flouted. Therefore we discontinued RagTime Solo, there will be no private version of RagTime 6 anymore.” After a successful start of the RagTime 6.0 software, sales edged significantly lower in the following years. Disagreements arose among the shareholders about the continuation of the company, which filed for bankruptcy in July 2007. As a result, the rights to RagTime were taken over by the newly established company RagTime.de Development GmbH, which was responsible for the development. The sales partner RagTime.de Sales GmbH distributed the RagTime products until October 2015. Today RagTime.de Development GmbH is also responsible for sales. The last level of development is the extensively revamped version RagTime 6.6 of 8 October 2015, which also includes new OS X features (e.g. high-resolution “Retina” displays) and supports Windows 10. == Programming == RagTime 1-3 were developed in Pascal, since version 4 the development is completely coded in C++. External programming and automation can be implemented via AppleScript on a Mac, and via OLE/COM-API (e.g. Visual Basic) under Windows. On a Mac, RagTime provides a comprehensive AppleScript library, for the automation of almost any task, from automatic document creation to the export of PDF documents. RagTime also supports “recordings” by use of the “AppleScript Editor”, which allows recording the interactive RagTime operation as an AppleScript program sequence. AppleScripts can be saved in the RagTime document and called via menu or shortcut keys. On Windows, RagTime (since version 6) disposes over an OLE/COM API, which allows automating many RagTime components via external programming. For that purpose there is a type library that installs the available RagTime OLE/COM object catalogue. Programming can be realized in all programming languages supported by Microsoft.

    Read more →
  • Non-separable wavelet

    Non-separable wavelet

    Non-separable wavelets are multi-dimensional wavelets that are not directly implemented as tensor products of wavelets on some lower-dimensional space. They have been studied since 1992. They offer a few important advantages. Notably, using non-separable filters leads to more parameters in design, and consequently better filters. The main difference, when compared to the one-dimensional wavelets, is that multi-dimensional sampling requires the use of lattices (e.g., the quincunx lattice). The wavelet filters themselves can be separable or non-separable regardless of the sampling lattice. Thus, in some cases, the non-separable wavelets can be implemented in a separable fashion. Unlike separable wavelet, the non-separable wavelets are capable of detecting structures that are not only horizontal, vertical or diagonal (show less anisotropy). == Examples == Red-black wavelets Contourlets Shearlets Directionlets Steerable pyramids Non-separable schemes for tensor-product wavelets

    Read more →
  • Elements of AI

    Elements of AI

    Elements of AI is a massive open online course (MOOC) teaching the basics of artificial intelligence. The course, originally launched in 2018, is designed and organized by the University of Helsinki and learning technology company MinnaLearn. The course includes modules on machine learning, neural networks, the philosophy of artificial intelligence, and using artificial intelligence to solve problems. It consists of two parts: Introduction to AI and its sequel, Building AI, that was released in late 2020. In November 2019, the course was named one of four winners of MIT’s Inclusive Innovation Challenge. University of Helsinki's computer science department is known as the alma mater of Linus Torvalds, a Finnish-American software engineer who is the creator of the Linux kernel, which is the kernel for Linux operating systems. == EU’s AI pledge == The government of Finland has pledged to offer the course for all EU citizens by the end of 2021, as the course is made available in all the official EU languages. The initiative was launched as part of Finland's Presidency of the Council of the European Union in 2019, with the European Commission providing translations of the course materials. In 2017, Finland launched an AI strategy to stay competitive in the field of AI amid growing competition between China and the United States. With the support of private companies and the government, Finland's now-realized goal was to get 1 percent of its citizens to participate in Elements of AI. Other governments have also given their support to the course. For instance, Germany's Federal Minister for Economic Affairs and Energy Peter Altmeier has encouraged citizens to take part in the course to help Germany gain a competitive advantage in AI. Sweden's Minister for Energy and Minister for Digital Development Anders Ygeman has said that Sweden aims to teach 1 percent of its population the basics of AI like Finland has. == Participants == Elements of AI had enrolled more than 1 million students from more than 110 countries by May 2023. A quarter of the course's participants are aged 45 and over, and some 40 percent are women. Among Nordic participants, the share of women is nearly 60 percent. In September 2022, the course was available in Finnish, Swedish, Estonian, English, German, Latvian, Norwegian, French, Belgian, Czech, Greek, Slovakian, Slovenian, Latvian, Lithuanian, Portuguese, Spanish, Irish, Icelandic, Maltese, Croatian, Romanian, Italian, Dutch, Polish, and Danish.

    Read more →
  • The Future of Work and Death

    The Future of Work and Death

    The Future of Work and Death is a 2016 documentary by Sean Blacknell and Wayne Walsh about the exponential growth of technology. The film showed at several film festivals including Raindance Film Festival, International Film Festival Rotterdam, Academia Film Olomouc and CPH:DOX. In May 2017 it received an official screening at the European Commission. It was distributed by First Run Features and Journeyman Pictures and was released on iTunes, Amazon Prime and On-demand on 9 May 2017. The film was made available on Sundance Now on 27 November 2017. A companion piece to the film, The Cost of Living, a documentary concerning universal basic income in Britain, was released on Amazon Prime on 8 October 2020. == Synopsis == World experts in the fields of futurology, anthropology, neuroscience, and philosophy consider the impact of technological advances on the two 'certainties' of human life; work and death. Charting human developments from Homo habilis, past the Industrial Revolution, to the digital age and beyond, the film looks at the shocking exponential rate at which mankind has managed to create technologies to ease the process of living. As we embark on the next phase of our adaptation, with automation and artificial intelligence signifying the complete move from man to machine, the film asks what the implications are for human fulfilment in an approaching era of job obsolescence and extreme longevity. == Cast == Dudley Sutton – Narrator Aubrey de Grey – Biomedical gerontologist and CSO of the SENS Research Foundation Will Self – Writer, journalist, political commentator and Professor of Contemporary Thought at Brunel University Rudolph E. Tanzi – Professor of Neurology at Harvard University and Director of the Genetics and Aging Research Unit at Massachusetts General Hospital (MGH) Martin Ford – Futurist and author Steve Fuller – Auguste Comte Chair in Social Epistemology at the Department of sociology at University of Warwick Murray Shanahan – Professor of Cognitive Robotics at Imperial College London Gray Scott – Futurist, executive producer of this production Vivek Wadhwa – Entrepreneur, academic and Director of Research at the Center for Entrepreneurship and Research Commercialization at the Pratt School of Engineering, Duke University Zoltan Istvan – Transhumanist and journalist Joanna Cook – Anthropologist, University College London Nicholas Kamara – Physician, Kable Hospital David Pearce – Transhumanist philosopher and co-founder of Humanity+ Peter Cochrane – Futurist and entrepreneur John Harris – Bioethicist, philosopher and Director of the Institute for Science, Ethics and Innovation at the University of Manchester Riva Melissa-Tez – Entrepreneur and transhumanist Ian Pearson – Futurologist Stuart Armstrong – Artificial intelligence researcher at Future of Humanity Institute

    Read more →
  • ALL-IN-1

    ALL-IN-1

    ALL-IN-1 was an office automation product developed and sold by Digital Equipment Corporation in the 1980s. It was one of the first purchasable off the shelf electronic mail products. It was later known as Office Server V3.2 for OpenVMS Alpha and OpenVMS VAX systems before being discontinued. == Overview == ALL-IN-1 was advertised as an office automation system including functionality in Electronic Messaging, Word Processing and Time Management. It offered an application development platform and customization capabilities that ranged from scripting to code-level integration. ALL-IN-1 was designed and developed by Skip Walter, John Churin and Marty Skinner from Digital Equipment Corporation who began work in 1977. Sheila Chance was hired as the software engineering manager in 1981. The first version of the software, called CP/OSS, the Charlotte Package of Office System Services, named after the location of the developers, was released in May 1982. In 1983, the product was renamed ALL-IN-1 and the Charlotte group continued to develop versions 1.1 through 1.3. Digital then made the decision to move most of the development activity to its central engineering facility in Reading, United Kingdom, where a group there took responsibility for the product from version 2.0 (released in field test in 1984 and to customers in 1985) onward. The Charlotte group continued to work on the Time Management subsystem until version 2.3 and other contributions were made from groups based in Sophia Antipolis, France (System for Customization Management and the integration with VAX Notes), Reading (Message Router and MAILbus), and Nashua, New Hampshire (FMS). ALL-IN-1 V3.0 introduced shared file cabinets and the File Cabinet Server (FCS) to lay the foundation for an eventual integration with TeamLinks, Digital's PC office client. Previous integrations with PCs included PC ALL-IN-1, a DOS-based product introduced in 1989 that never proved popular with customers. Bob Wyman was the first product manager. He oversaw the growth of the product culminating in over $2 billion per year in revenue and market leadership in the proprietary office automation sector. Other consultants from Digital Equipment Corporation involved include Frank Nicodem, Donald Vickers and Tony Redmond.

    Read more →