AI Avatar Using Photo

AI Avatar Using Photo — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Memory color effect

    Memory color effect

    The memory color effect is the phenomenon that the canonical hue of a type of object acquired through experience (e.g. the sky, a leaf, or a strawberry) can directly modulate the appearance of the actual colors of objects. Human observers acquire memory colors through their experiences with instances of that type. For example, most human observers know that an apple typically has a reddish hue; this knowledge about the canonical color which is represented in memory constitutes a memory color. As an example of the effect, normal human trichromats, when presented with a gray banana, often perceive the gray banana as being yellow - the banana's memory color. In light of this, subjects typically adjust the color of the banana towards the color blue - the opponent color of yellow - when asked to adjust its surface to gray to cancel the subtle activation of banana's memory color. Subsequent empirical studies have also shown the memory color effect on man-made objects (e.g. smurfs, German mailboxes), the effect being especially pronounced for blue and yellow objects. To explain this, researchers have argued that because natural daylight shifts from short wavelengths of light (i.e., bluish hues) towards light of longer wavelengths (i.e., yellowish-orange hues) during the day, the memory colors for blue and yellow objects are recruited by the visual system to a higher degree to compensate for this fluctuation in illumination, thereby providing a stronger memory color effect. == Form identification == Memory color plays a role when detecting an object. In a study where participants were given objects, such as an apple, with two alternate forms for each, a crooked apple and a circular apple, researchers changed the colors of the alternate forms and asked if they could identify them. Most of the participants answered "unsure," suggesting that we use memory color when identifying an object. The research redefined memory color as a phenomenon when "a form's identity affects the phenomenal hue of that form." == Color effect on memorization == Memory color effect can be derived from the human instinct to memorize objects better. Comparing the effect of recognizing gray-scaled images and colored images, results showed that people were able to recall colored images 5% higher compared to gray-scaled images. An important factor was that higher level of contrast between the object and background color influences memory. In a specific study related to this, participants reported that colors were 5% to 10% easier to recognize compared to black and white. == Color constancy and memory color effect == Color constancy is the phenomenon where a surface to appear to be of the same color under a wide rage of illumination. A study tested two hypotheses with regards to color memory; the photoreceptor hypothesis and the surface reflectance hypothesis. The test color was surround either by various color patches forming a complex pattern or a uniform “grey” field at the same chromaticity as that of the illuminant. The test color was presented on a dark background for the control group. It was observed that complex surround results where in line with the surface-reflectance hypothesis and not the photoreceptor hypothesis, showing that the accuracy and precision of color memory are fundamentals to understanding the phenomenon of color constancy. == Significance to the evolution of trichromacy == While objects that possess canonical hues make up a small percentage of the objects which populate humans’ visual experience, the human visual system evolved in an environment populated with objects that possess canonical hues. This suggests that the memory color effect is related to the emergence of trichromacy because it has been argued that trichromacy evolved to optimize the ability to detect ripe fruits—objects that appear in canonical hues. == In perception research == In perception research, the memory color effect is cited as evidence for the opponent color theory, which states that four basic colors can be paired with its opponent color: red—green, blue—yellow. This explains why participants adjust the ripe banana color to a blueish tone to make its memory color yellow as gray. Researchers have also found empirical evidence that suggests memory color is recruited by the visual system to achieve color constancy. For example, participants had a lower percentage of color constancy when looking at a color incongruent scene, such as a purple banana, compared to a color diagnostical scene, a yellow banana. This suggests that color constancy is influenced by the color of objects that we are familiar with, which the memory color effect takes part.

    Read more →
  • Clipping (computer graphics)

    Clipping (computer graphics)

    Clipping, in the context of computer graphics, is a method to selectively enable or disable rendering operations within a defined region of interest. Mathematically, clipping can be described using the terminology of constructive geometry. A rendering algorithm only draws pixels in the intersection between the clip region and the scene model. Lines and surfaces outside the view volume (aka. frustum) are removed. Clip regions are commonly specified to improve render performance. Pixels that will be drawn are said to be within the clip region. Pixels that will not be drawn are outside the clip region. More informally, pixels that will not be drawn are said to be "clipped." == In 2D graphics == In two-dimensional graphics, a clip region may be defined so that pixels are only drawn within the boundaries of a window or frame. Clip regions can also be used to selectively control pixel rendering for aesthetic or artistic purposes. In many implementations, the final clip region is the composite (or intersection) of one or more application-defined shapes, as well as any system hardware constraints In one example application, consider an image editing program. A user application may render the image into a viewport. As the user zooms and scrolls to view a smaller portion of the image, the application can set a clip boundary so that pixels outside the viewport are not rendered. In addition, GUI widgets, overlays, and other windows or frames may obscure some pixels from the original image. In this sense, the clip region is the composite of the application-defined "user clip" and the "device clip" enforced by the system's software and hardware implementation. Application software can take advantage of this clip information to save computation time, energy, and memory, avoiding work related to pixels that aren't visible. == In 3D graphics == In three-dimensional graphics, the terminology of clipping can be used to describe many related features. Typically, "clipping" refers to operations in the plane that work with rectangular shapes, and "culling" refers to more general methods to selectively process scene model elements. This terminology is not rigid, and exact usage varies among many sources. Scene model elements include geometric primitives: points or vertices; line segments or edges; polygons or faces; and more abstract model objects such as curves, splines, surfaces, and even text. In complicated scene models, individual elements may be selectively disabled (clipped) for reasons including visibility within the viewport (frustum culling); orientation (backface culling), obscuration by other scene or model elements (occlusion culling, depth- or "z" clipping). Sophisticated algorithms exist to efficiently detect and perform such clipping. Many optimized clipping methods rely on specific hardware acceleration logic provided by a graphics processing unit (GPU). The concept of clipping can be extended to higher dimensionality using methods of abstract algebraic geometry. === Near clipping === Beyond projection of vertices & 2D clipping, near clipping is required to correctly rasterise 3D primitives; this is because vertices may have been projected behind the eye. Near clipping ensures that all the vertices used have valid 2D coordinates. Together with far-clipping it also helps prevent overflow of depth-buffer values. Some early texture mapping hardware (using forward texture mapping) in video games suffered from complications associated with near clipping and UV coordinates. === Occlusion clipping (Z- or depth clipping) === In 3D computer graphics, "Z" often refers to the depth axis in the system of coordinates centered at the viewport origin: "Z" is used interchangeably with "depth", and conceptually corresponds to the distance "into the virtual screen." In this coordinate system, "X" and "Y" therefore refer to a conventional cartesian coordinate system laid out on the user's screen or viewport. This viewport is defined by the geometry of the viewing frustum, and parameterizes the field of view. Z-clipping, or depth clipping, refers to techniques that selectively render certain scene objects based on their depth relative to the screen. Most graphics toolkits allow the programmer to specify a "near" and "far" clip depth, and only portions of objects between those two planes are displayed. A creative application programmer can use this method to render visualizations of the interior of a 3D object in the scene. For example, a medical imaging application could use this technique to render the organs inside a human body. A video game programmer can use clipping information to accelerate game logic. For example, a tall wall or building that occludes other game entities can save GPU time that would otherwise be spent transforming and texturing items in the rear areas of the scene; and a tightly integrated software program can use this same information to save CPU time by optimizing out game logic for objects that aren't seen by the player. == Algorithms == Line clipping algorithms: Cohen–Sutherland Liang–Barsky Fast-clipping Cyrus–Beck Nicholl–Lee–Nicholl Skala O(lg N) algorithm Polygon clipping algorithms: Greiner–Hormann Sutherland–Hodgman Weiler–Atherton Vatti Rendering methodologies Painter's algorithm

    Read more →
  • National Cyber Security Policy 2013

    National Cyber Security Policy 2013

    National Cyber Security Policy is a policy framework by Department of Electronics and Information Technology (DeitY) It aims at protecting the public and private infrastructure from cyber attacks. The policy also intends to safeguard "information, such as personal information (of web users), financial and banking information and sovereign data". This was particularly relevant in the wake of US National Security Agency (NSA) leaks that suggested the US government agencies are spying on Indian users, who have no legal or technical safeguards against it. Ministry of Communications and Information Technology (India) defines Cyberspace as a complex environment consisting of interactions between people, software services supported by worldwide distribution of information and communication technology. == Reason for Cyber Security policies == India had no Cyber security policy before 2013. In 2013, The Hindu newspaper, citing documents leaked by NSA whistle-blower Edward Snowden, has alleged that much of the NSA surveillance was focused on India's domestic politics and its strategic and commercial interests. This sparked a furore among people. Under pressure, the government unveiled a National Cyber Security Policy 2013 on 2 July 2013. == Vision == To build a secure and resilient cyberspace for citizens, business, and government and also to protect anyone from intervening in user's privacy.It mentioned a five year target of training five lakh cyber security personnel by 2018. == Mission == To protect information and information infrastructure in cyberspace, build capabilities to prevent and respond to cyber threat, reduce vulnerabilities and minimize damage from cyber incidents through a combination of institutional structures, people, processes, technology, and cooperation. == Objective == Ministry of Communications and Information Technology (India) define objectives as follows: To create a secure cyber ecosystem in the country, generate adequate trust and confidence in IT system and transactions in cyberspace and thereby enhance adoption of IT in all sectors of the economy. To create an assurance framework for the design of security policies and promotion and enabling actions for compliance to global security standards and best practices by way of conformity assessment (Product, process, technology & people). To strengthen the Regulatory Framework for ensuring a SECURE CYBERSPACE ECOSYSTEM. To enhance and create National and Sectoral level 24x7 mechanism for obtaining strategic information regarding threats to ICT infrastructure, creating scenarios for response, resolution and crisis management through effective predictive, preventive, protective response and recovery actions. -To improve visibility of integrity of ICT products and services by establishing infrastructure for testing & validation of security of such product. To create workforce for 500,000 professionals skilled in next 5 years through capacity building skill development and training. To provide fiscal benefit to businesses for adoption of standard security practices and processes. To enable Protection of information while in process, handling, storage & transit so as to safeguard privacy of citizen's data and reducing economic losses due to cyber crime or data theft. To enable effective prevention, investigation and prosecution of cybercrime and enhancement of law enforcement capabilities through appropriate legislative intervention. == Strategies == Creating a secured Ecosystem. Creating an assurance framework. Encouraging Open Standards. Strengthening The regulatory Framework. Creating a mechanism for Security Threats Early Warning, Vulnerability management, and response to security threats. Securing E-Governance services. Protection and resilience of Critical Information Infrastructure. Promotion of Research and Development in cyber security. Reducing supply chain risks Human Resource Development (fostering education and training programs both in formal and informal sectors to Support the Nation's cyber security needs and build capacity. Creating cyber security awareness. Developing effective Public-Private partnerships. To develop bilateral and multilateral relationships in the area of cyber security with another country. (Information sharing and cooperation) a Prioritized approach for implementation.

    Read more →
  • Metadata repository

    Metadata repository

    A metadata repository is a database created to store metadata. Metadata is information about the structures that contain the actual data. Metadata is often said to be "data about data", but this is misleading. Data profiles are an example of actual "data about data". Metadata adds one layer of abstraction to this definition– it is data about the structures that contain data. Metadata may describe the structure of any data, of any subject, stored in any format. A well-designed metadata repository typically contains data far beyond simple definitions of the various data structures. Typical repositories store dozens to hundreds of separate pieces of information about each data structure. Comparing the metadata of a couple data items - one digital and one physical - clarify what metadata is: First, digital: For data stored in a database one may have a table called "Patient" with many columns, each containing data which describes a different attribute of each patient. One of these columns may be named "Patient_Last_Name". What is some of the metadata about the column that contains the actual surnames of patients in the database? We have already used two items: the name of the column that contains the data (Patient_Last_Name) and the name of the table that contains the column (Patient). Other metadata might include the maximum length of last name that may be entered, whether or not last name is required (can we have a patient without Patient_Last_Name?), and whether the database converts any surnames entered in lower case to upper case. Metadata of a security nature may show the restrictions which limit who may view these names. Second, physical: For data stored in a brick and mortar library, one have many volumes and may have various media, including books. Metadata about books would include ISBN, Binding_Type, Page_Count, Author, etc. Within Binding_Type, metadata would include possible bindings, material, etc. This contextual information of business data include meaning and content, policies that govern, technical attributes, specifications that transform, and programs that manipulate. == Definition == The metadata repository is responsible for physically storing and cataloging metadata. Data in a metadata repository should be generic, integrated, current, and historical: Generic Meta model should store the metadata by generic terms instead of storing it by an applications-specific defined way, so that if your data base standard changes from one product to another the physical meta model of the metadata repository would not need to change. Integration of the metadata repository allows all business areas' metadata to be in an integrated fashion: Covering all domains and subject areas of the organization. current and historical The metadata repository should have accessible current and historical metadata. Metadata repositories used to be referred to as a data dictionary. With the transition of needs for the metadata usage for business intelligence has increased so is the scope of the metadata repository increased. Earlier data dictionaries are the closest place to interact technology with business. Data dictionaries are the universe of metadata repository in the initial stages but as the scope increased Business glossary and their tags to variety of status flags emerged in the business side while consumption of the technology metadata, their lineage and linkages made the repository, the source for valuable reports to bring business and technology together and helped data management decisions easier as well as assess the cost of the changes. Metadata repository explores the enterprise wide data governance, data quality and master data management (includes master data and reference data) and integrates this wealth of information with integrated metadata across the organization to provide decision support system for data structures, even though it only reflects the structures consumed from various systems. == Repository vs. registry == Repository has additional functionalities compared with registry. Metadata repository not only stores metadata like Metadata registry but also adds relationships with related metadata types. Metadata when related in a flow from its point of entry into organization up to the deliverables is considered as the lineage of that data point. Metadata when related across other related metadata types is called linkages. By providing the relationships to all the metadata points across the organization and maintaining its integrity with an architecture to handle the changes, metadata repository provides the basic material for understanding the complete data flow and their definitions and their impact. Also the important feature is to maintain the version control though this statement for contrasting is open for discussion. These definitions are still evolving, so the accuracy of the definitions needs refinement. The purpose of registry is to define the metadata element and maintained across the organization. And data models and other data management teams refer to the registry for any changes to follow. While Metadata repository sources metadata from various metadata systems in the organizations and reflects what is in the upstream. Repository never acts as an upstream while registry is used as an upstream for metadata changes. == Reason for use == Metadata repository enables all the structure of the organizations data containers to one integrated place. This opens plethora of resourceful information for making calculated business decisions. This tool uses one generic form of data model to integrate all the models thus brings all the applications and programs of the organization into one format. And on top of it applying the business definitions and business processes brings the business and technology closer that will help organizations make reliable roadmaps with definite goals. With one stop information, business will have more control on the changes, and can do impact analysis of the tool. Usually business spends much time and money to make decisions based on discovery and research on impacts to make changes or to add new data structures or remove structures in data management of the organization. With a structured and well maintained repository, moving the product from ideation to delivery takes the least amount of time (considering other variables are constant). To sum it up: Integration of the metadata across the organization Build relationship between various metadata types Build relationship between various disparate systems Define business golden copy of definitions Version control of the changes at structure level Interaction with Reference data Link view to master data Automatic synchronization with various authorized metadata source systems More control to business decisions Validate the structures by overlapping the models Discovering discrepancies, gaps, lineage, metrics at data structure level Each database management system (DBMS) and database tools have their own language for the metadata components within. Database applications already have their own repositories or registries that are expected to provide all of the necessary functionality to access the data stored within. Vendors do not want other companies to be capable of easily migrating data away from their products and into competitors products, so they are proprietary with the way they handle metadata. CASE tools, DBMS dictionaries, ETL tools, data cleansing tools, OLAP tools, and data mining tools all handle and store metadata differently. Only a metadata repository can be designed to store the metadata components from all of these tools. == Design == Metadata repositories should store metadata in four classifications: ownership, descriptive characteristics, rules and policies, and physical characteristics. Ownership, showing the data owner and the application owner. The descriptive characteristics, define the names, types and lengths, and definitions describing business data or business processes. Rules and policies, will define security, data cleanliness, timelines for data, and relationships. Physical characteristics define the origin or source, and physical location. Like building a logical data model for creating a database, a logical meta model can help identify the metadata requirements for business data. The metadata repository will be centralized, decentralized, or distributed. A centralized design means that there is one database for the metadata repository that stores metadata for all applications business wide. A centralized metadata repository has the same advantages and disadvantages of a centralized database. Easier to manage because all the data is in one database, but the disadvantage is that bottlenecks may occur. A decentralized metadata repository stores metadata in multiple databases, either separated by location and or departments of the business. This makes management of the repository more involved than a centraliz

    Read more →
  • Kolmogorov–Arnold Networks

    Kolmogorov–Arnold Networks

    Kolmogorov–Arnold Networks (KANs) are a type of artificial neural network architecture inspired by the Kolmogorov–Arnold representation theorem, also known as the superposition theorem. Unlike traditional multilayer perceptrons (MLPs), which rely on fixed activation functions and linear weights, KANs replace each weight with a learnable univariate function, often represented using splines. == History == KANs (Kolmogorov–Arnold Networks) were proposed by Liu et al. (2024) as a generalization of the Kolmogorov–Arnold representation theorem (KART), aiming to outperform MLPs in small-scale AI and scientific tasks. Before KANs, numerous studies explored KART's connections to neural networks or used it as a basis for designing new network architectures. In the 1980s and 1990s, early research applied KART to neural network design. Kůrková et al. (1992), Hecht-Nielsen (1987), and Nees (1994) established theoretical foundations for multilayer networks based on KART. Igelnik et al. (2003) introduced the Kolmogorov Spline Network using cubic splines to model complex functions. Sprecher (1996, 1997) introduced numerical methods for building network layers, while Nakamura et al. (1993) created activation functions with guaranteed approximation accuracy. These works linked KART's theoretical potential with practical neural network implementation. KART has also been used in other computational and theoretical fields. Coppejans (2004) developed nonparametric regression estimators using B-splines, Bryant (2008) applied it to high-dimensional image tasks, Liu (2015) investigated theoretical applications in optimal transport and image encryption, and more recently, Polar and Poluektov (2021) used Urysohn operators for efficient KART construction, while Fakhoury et al. (2022) introduced ExSpliNet, integrating KART with probabilistic trees and multivariate B-splines for improved function approximation. == Architecture == KANs are based on the Kolmogorov–Arnold representation theorem, which was linked to the 13th Hilbert problem. Given x = ( x 1 , x 2 , … , x n ) {\displaystyle x=(x_{1},x_{2},\dots ,x_{n})} consisting of n variables, a multivariate continuous function f ( x ) {\displaystyle f(x)} can be represented as: f ( x ) = f ( x 1 , … , x n ) = ∑ q = 1 2 n + 1 Φ q ( ∑ p = 1 n φ q , p ( x p ) ) {\displaystyle f(x)=f(x_{1},\dots ,x_{n})=\sum _{q=1}^{2n+1}\Phi _{q}\left(\sum _{p=1}^{n}\varphi _{q,p}(x_{p})\right)} (1) This formulation contains two nested summations: an outer and an inner sum. The outer sum ∑ q = 1 2 n + 1 {\displaystyle \sum _{q=1}^{2n+1}} aggregates 2 n + 1 {\displaystyle 2n+1} terms, each involving a function Φ q : R → R {\displaystyle \Phi _{q}:\mathbb {R} \to \mathbb {R} } . The inner sum ∑ p = 1 n {\displaystyle \sum _{p=1}^{n}} computes n terms for each q, where each term φ q , p : [ 0 , 1 ] → R {\displaystyle \varphi _{q,p}:[0,1]\to \mathbb {R} } is a continuous function of the single variable x p {\displaystyle x_{p}} . The inner continuous functions φ q , p {\displaystyle \varphi _{q,p}} are universal, independent of f {\displaystyle f} , while the outer functions Φ q {\displaystyle \Phi _{q}} depend on the specific function f {\displaystyle f} being represented. The representation (1) holds for all multivariate functions f {\displaystyle f} as proved in . If f {\displaystyle f} is continuous, then the outer functions Φ q {\displaystyle \Phi _{q}} are continuous; if f {\displaystyle f} is discontinuous, then the corresponding Φ q {\displaystyle \Phi _{q}} are generally discontinuous, while the inner functions φ q , p {\displaystyle \varphi _{q,p}} remain the same universal functions. Liu et al. proposed the name KAN. A general KAN network consisting of L layers takes x to generate the output as: K A N ( x ) = ( Φ L − 1 ∘ Φ L − 2 ∘ ⋯ ∘ Φ 1 ∘ Φ 0 ) x {\displaystyle \mathrm {KAN} (x)=(\Phi ^{L-1}\circ \Phi ^{L-2}\circ \cdots \circ \Phi ^{1}\circ \Phi ^{0})x} (3) Here, Φ l {\displaystyle \Phi ^{l}} is the function matrix of the l-th KAN layer or a set of pre-activations. Let i denote the neuron of the l-th layer and j the neuron of the (l+1)-th layer. The activation function φ j , i l {\displaystyle \varphi _{j,i}^{l}} connects (l, i) to (l+1, j): φ j , i l , l = 0 , … , L − 1 , i = 1 , … , n l , j = 1 , … , n l + 1 {\displaystyle \varphi _{j,i}^{l},\quad l=0,\dots ,L-1,\;i=1,\dots ,n_{l},\;j=1,\dots ,n_{l+1}} (4) where nl is the number of nodes of the l-th layer. Thus, the function matrix Φ l {\displaystyle \Phi ^{l}} can be represented as an n l + 1 × n l {\displaystyle n_{l+1}\times n_{l}} matrix of activations: x l + 1 = ( φ 1 , 1 l ( ⋅ ) φ 1 , 2 l ( ⋅ ) ⋯ φ 1 , n l l ( ⋅ ) φ 2 , 1 l ( ⋅ ) φ 2 , 2 l ( ⋅ ) ⋯ φ 2 , n l l ( ⋅ ) ⋮ ⋮ ⋱ ⋮ φ n l + 1 , 1 l ( ⋅ ) φ n l + 1 , 2 l ( ⋅ ) ⋯ φ n l + 1 , n l l ( ⋅ ) ) x l {\displaystyle x^{l+1}={\begin{pmatrix}\varphi _{1,1}^{l}(\cdot )&\varphi _{1,2}^{l}(\cdot )&\cdots &\varphi _{1,n_{l}}^{l}(\cdot )\\\varphi _{2,1}^{l}(\cdot )&\varphi _{2,2}^{l}(\cdot )&\cdots &\varphi _{2,n_{l}}^{l}(\cdot )\\\vdots &\vdots &\ddots &\vdots \\\varphi _{n_{l+1},1}^{l}(\cdot )&\varphi _{n_{l+1},2}^{l}(\cdot )&\cdots &\varphi _{n_{l+1},n_{l}}^{l}(\cdot )\end{pmatrix}}x^{l}} == Implementations == To make the KAN layers optimizable, the inner function is formed by the combination of spline and basic functions as the formula: φ ( x ) = w b b ( x ) + w s spline ( x ) {\displaystyle \varphi (x)=w_{b}\,b(x)+w_{s}\,{\text{spline}}(x)} where b ( x ) {\displaystyle b(x)} is the basic function, usually defined as s i l u ( x ) = x / ( 1 + e x ) {\displaystyle silu(x)=x/(1+e^{x})} and w b {\displaystyle w_{b}} is the base weight matrix. Also, w s {\displaystyle w_{s}} is the spline weight matrix and spline ( x ) {\displaystyle {\text{spline}}(x)} is the spline function. The spline function can be a sum of B-splines. spline ( x ) = ∑ i c i B i ( x ) {\displaystyle {\text{spline}}(x)=\sum _{i}c_{i}B_{i}(x)} Many studies suggested to use other polynomial and curve functions instead of B-spline to create new KAN variants. == Functions used == The choice of functional basis strongly influences the performance of KANs. Common function families include: B-splines: Provide locality, smoothness, and interpretability; they are the most widely used in current implementations. RBFs (include Gaussian RBFs): Capture localized features in data and are effective in approximating functions with non-linear or clustered structures. Chebyshev polynomials: Offer efficient approximation with minimized error in the maximum norm, making them useful for stable function representation. Rational function: Useful for approximating functions with singularities or sharp variations, as they can model asymptotic behavior better than polynomials. Fourier series: Capture periodic patterns effectively and are particularly useful in domains such as physics-informed machine learning. Wavelet functions (DoG, Mexican hat, Morlet, and Shannon): Used for feature extraction as they can capture both high-frequency and low-frequency data components. Piecewise linear functions: Provide efficient approximation for multivariate functions in KANs. == Usage == In some modern neural architectures like convolutional neural networks (CNNs), recurrent neural networks (RNNs), and Transformers, KANs are typically used as drop-in substitutes for MLP layers. Despite KANs' general-purpose design, researchers have created and used them for a number of tasks: Scientific machine learning (SciML): Function fitting, partial differential equations (PDEs) and physical/mathematical laws. Continual learning: KANs better preserve previously learned information during incremental updates, avoiding catastrophic forgetting due to the locality of spline adjustments. Graph neural networks: Extensions such as Kolmogorov–Arnold Graph Neural Networks (KA-GNNs) integrate KAN modules into message-passing architectures, showing improvements in molecular property prediction tasks. Sensor data processing: Kolmogorov–Arnold Networks (KANs) have recently been applied to sensor data processing due to their ability to model complex nonlinear relationships with relatively few parameters and improved interpretability compared to conventional multilayer perceptrons. Applications include industrial soft sensors, biomedical signal analysis, remote sensing, and environmental monitoring systems. == Drawbacks == KANs can be computationally intensive and require a large number of parameters due to their use of polynomial functions to capture data.

    Read more →
  • Thunderspy

    Thunderspy

    Thunderspy is a type of security vulnerability, based on the Intel Thunderbolt 3 port, first reported publicly on 10 May 2020, that can result in an evil maid (i.e., attacker of an unattended device) attack gaining full access to a computer's information in about five minutes, and may affect millions of Apple, Linux and Windows computers, as well as any computers manufactured before 2019, and some after that. According to Björn Ruytenberg, the discoverer of the vulnerability, "All the evil maid needs to do is unscrew the backplate, attach a device momentarily, reprogram the firmware, reattach the backplate, and the evil maid gets full access to the laptop. All of this can be done in under five minutes." The malicious firmware is used to clone device identities which makes classical DMA attack possible. == History == The Thunderspy security vulnerabilities were first publicly reported by Björn Ruytenberg of Eindhoven University of Technology in the Netherlands on 10 May 2020. Thunderspy is similar to Thunderclap, another security vulnerability, reported in 2019, that also involves access to computer files through the Thunderbolt port. == Impact == The security vulnerability affects millions of Apple, Linux and Windows computers, as well as all computers manufactured before 2019, and some after that. However, this impact is restricted mainly to how precise a bad actor would have to be to execute the attack. Physical access to a machine with a vulnerable Thunderbolt controller is necessary, as well as a writable ROM chip for the Thunderbolt controller's firmware. Additionally, part of Thunderspy, specifically the portion involving re-writing the firmware of the controller, requires the device to be in sleep, or at least in some sort of powered-on state, to be effective. Machines that force power-off when the case is open may assist in resisting this attack to the extent that the feature (switch) itself resists tampering. Due to the nature of attacks that require extended physical access to hardware, it's unlikely the attack will affect users outside of a business or government environment. == Mitigation == The researchers claim there is no easy software solution, and may only be mitigated by disabling the Thunderbolt port altogether. However, the impacts of this attack (reading kernel level memory without the machine needing to be powered off) are largely mitigated by anti-intrusion features provided by many business machines. Intel claims enabling such features would substantially restrict the effectiveness of the attack. Microsoft's official security recommendations recommend disabling sleep mode while using BitLocker. Using hibernation in place of sleep mode turns the device off, mitigating potential risks of attack on encrypted data.

    Read more →
  • Image

    Image

    An image or picture is a visual representation. An image can be two-dimensional, such as a drawing, painting, or photograph, or three-dimensional, such as a carving or sculpture. Images may be displayed through other media, including a projection on a surface, activation of electronic signals, or digital displays; they can also be reproduced through mechanical means, such as photography, printmaking, or photocopying. Images can also be animated through digital or physical processes. In the context of signal processing, an image is a distributed amplitude of color(s). In optics, the term image (or optical image) refers specifically to the reproduction of an object formed by light waves coming from the object. A volatile image exists or is perceived only for a short period. This may be a reflection of an object by a mirror, a projection of a camera obscura, or a scene displayed on a cathode-ray tube. A fixed image, also called a hard copy, is one that has been recorded on a material object, such as paper or textile. A mental image exists in an individual's mind as something one remembers or imagines. The subject of an image does not need to be real; it may be an abstract concept such as a graph or function or an imaginary entity. For a mental image to be understood outside of an individual's mind, however, there must be a way of conveying that mental image through the words or visual productions of the subject. == Characteristics == === Two-dimensional images === The broader sense of the word 'image' also encompasses any two-dimensional figure, such as a map, graph, pie chart, painting, or banner. In this wider sense, images can also be rendered manually, such as by drawing, the art of painting, or the graphic arts (such as lithography or etching). Additionally, images can be rendered automatically through printing, computer graphics technology, or a combination of both methods. A two-dimensional image does not need to use the entire visual system to be a visual representation. An example of this is a grayscale ("black and white") image, which uses the visual system's sensitivity to brightness across all wavelengths without taking into account different colors. A black-and-white visual representation of something is still an image, even though it does not fully use the visual system's capabilities. On the other hand, some processes can be used to create visual representations of objects that are otherwise inaccessible to the human visual system. These include microscopy for the magnification of minute objects, telescopes that can observe objects at great distances, X-rays that can visually represent the interior structures of the human body (among other objects), magnetic resonance imaging (MRI), positron emission tomography (PET scans), and others. Such processes often rely on detecting electromagnetic radiation that occurs beyond the light spectrum visible to the human eye and converting such signals into recognizable images. === Three-dimensional images === Aside from sculpture and other physical activities that can create three-dimensional images from solid material, some modern techniques, such as holography, can create three-dimensional images that are reproducible but intangible to human touch. Some photographic processes can now render the illusion of depth in an otherwise "flat" image, but "3-D photography" (stereoscopy) or "3-D film" are optical illusions that require special devices such as eyeglasses to create the illusion of depth. === Moving images === "Moving" two-dimensional images are actually illusions of movement perceived when still images are displayed in sequence, each image lasting less, and sometimes much less, than a fraction of a second. The traditional standard for the display of individual frames by a motion picture projector has been 24 frames per second (FPS) since at least the commercial introduction of "talking pictures" in the late 1920s, which necessitated a standard for synchronizing images and sounds. Even in electronic formats such as television and digital image displays, the apparent "motion" is actually the result of many individual lines giving the impression of continuous movement. This phenomenon has often been described as "persistence of vision": a physiological effect of light impressions remaining on the retina of the eye for very brief periods. Even though the term is still sometimes used in popular discussions of movies, it is not a scientifically valid explanation. Other terms emphasize the complex cognitive operations of the brain and the human visual system. "Flicker fusion", the "phi phenomenon", and "beta movement" are among the terms that have replaced "persistence of vision", though no one term seems adequate to describe the process. == Cultural and other uses == Image-making seems to have been common to virtually all human cultures since at least the Paleolithic era. Prehistoric examples of rock art—including cave paintings, petroglyphs, rock reliefs, and geoglyphs—have been found on every inhabited continent. Many of these images seem to have served various purposes: as a form of record-keeping; as an element of spiritual, religious, or magical practice; or even as a form of communication. Early writing systems, including hieroglyphics, ideographic writing, and even the Roman alphabet, owe their origins in some respects to pictorial representations. === Meaning and signification === Images of any type may convey different meanings and sensations for individual viewers, regardless of whether the image's creator intended them. An image may be taken simply as a more or less "accurate" copy of a person, place, thing, or event. It may represent an abstract concept, such as the political power of a ruler or ruling class, a practical or moral lesson, an object for spiritual or religious veneration, or an object—human or otherwise—to be desired. It may also be regarded for its purely aesthetic qualities, rarity, or monetary value. Such reactions can depend on the viewer's context. A religious image in a church may be regarded differently than the same image mounted in a museum. Some might view it simply as an object to be bought or sold. Viewers' reactions will also be guided or shaped by their education, class, race, and other contexts. The study of emotional sensations and their relationship to any given image falls into the categories of aesthetics and the philosophy of art. While such studies inevitably deal with issues of meaning, another approach to signification was suggested by the American philosopher, logician, and semiotician Charles Sanders Peirce. "Images" are one type of the broad category of "signs" proposed by Peirce. Although his ideas are complex and have changed over time, the three categories of signs that he distinguished stand out: The "icon," which relates to an object by resemblance to some quality of the object. A painted or photographed portrait is an icon by virtue of its resemblance to the painting's or photograph's subject. A more abstract representation, such as a map or diagram, can also be an icon. The "index," which relates to an object by some real connection. For example, smoke may be an index of fire, or the temperature recorded on a thermometer may be an index of a patient's illness or health. The "symbol," which lacks direct resemblance or connection to an object but whose association is arbitrarily assigned by the creator or dictated by cultural and historical habit, convention, etc. The color red, for example, may connote rage, beauty, prosperity, political affiliation, or other meanings within a given culture or context; the Swedish film director Ingmar Bergman claimed that his use of the color in his 1972 film Cries and Whispers came from his personal visualization of the human soul. A single image may exist in all three categories at the same time. The Statue of Liberty provides an example. While there have been countless two-dimensional and three-dimensional "reproductions" of the statue (i.e., "icons" themselves), the statue itself exists as an "icon" by virtue of its resemblance to a human woman (or, more specifically, previous representations of the Roman goddess Libertas or the female model used by the artist Frederic-Auguste Bartholdi). an "index" representing New York City or the United States of America in general due to its placement in New York Harbor, or with "immigration" from its proximity to the immigration center at Ellis Island. a "symbol" as a visualization of the abstract concept of "liberty" or "freedom" or even "opportunity" or "diversity". === Critiques of imagery === The nature of images, whether three-dimensional or two-dimensional, created for a specific purpose or only for aesthetic pleasure, has continued to provoke questions and even condemnation at different times and places. In his dialogue, The Republic, the Greek philosopher Plato described our apparent reality as a copy of a higher order of universal forms.

    Read more →
  • Packed pixel

    Packed pixel

    In packed pixel or chunky framebuffer organization, the bits defining each pixel are clustered and stored consecutively. For example, if there are 16 bits per pixel, each pixel is represented in two consecutive (contiguous) 8-bit bytes in the framebuffer. If there are 4 bits per pixel, each framebuffer byte defines two pixels, one in each nibble. The latter example is as opposed to storing a single 4-bit pixel in a byte, leaving 4 bits of the byte unused. If a pixel has more than one channel, the channels are interleaved when using packed pixel organization. Packed pixel displays were common on early microcomputer system that shared a single main memory for both the central processing unit (CPU) and display driver. In such systems, memory was normally accessed a byte at a time, so by packing the pixels, the display system could read out several pixels worth of data in a single read operation. Packed pixel is one of two major ways to organize graphics data in memory, the other being planar organization, where each pixel is made of individual bits stored in their own plane. For a 4-bit color value, memory would be organized as four screen-sized planes of one bit each and a single pixel's value built up by selecting the appropriate bit from each plane. Planar organization has the advantage that the data can be accessed in parallel, and is used when memory bandwidth is an issue.

    Read more →
  • Metadata repository

    Metadata repository

    A metadata repository is a database created to store metadata. Metadata is information about the structures that contain the actual data. Metadata is often said to be "data about data", but this is misleading. Data profiles are an example of actual "data about data". Metadata adds one layer of abstraction to this definition– it is data about the structures that contain data. Metadata may describe the structure of any data, of any subject, stored in any format. A well-designed metadata repository typically contains data far beyond simple definitions of the various data structures. Typical repositories store dozens to hundreds of separate pieces of information about each data structure. Comparing the metadata of a couple data items - one digital and one physical - clarify what metadata is: First, digital: For data stored in a database one may have a table called "Patient" with many columns, each containing data which describes a different attribute of each patient. One of these columns may be named "Patient_Last_Name". What is some of the metadata about the column that contains the actual surnames of patients in the database? We have already used two items: the name of the column that contains the data (Patient_Last_Name) and the name of the table that contains the column (Patient). Other metadata might include the maximum length of last name that may be entered, whether or not last name is required (can we have a patient without Patient_Last_Name?), and whether the database converts any surnames entered in lower case to upper case. Metadata of a security nature may show the restrictions which limit who may view these names. Second, physical: For data stored in a brick and mortar library, one have many volumes and may have various media, including books. Metadata about books would include ISBN, Binding_Type, Page_Count, Author, etc. Within Binding_Type, metadata would include possible bindings, material, etc. This contextual information of business data include meaning and content, policies that govern, technical attributes, specifications that transform, and programs that manipulate. == Definition == The metadata repository is responsible for physically storing and cataloging metadata. Data in a metadata repository should be generic, integrated, current, and historical: Generic Meta model should store the metadata by generic terms instead of storing it by an applications-specific defined way, so that if your data base standard changes from one product to another the physical meta model of the metadata repository would not need to change. Integration of the metadata repository allows all business areas' metadata to be in an integrated fashion: Covering all domains and subject areas of the organization. current and historical The metadata repository should have accessible current and historical metadata. Metadata repositories used to be referred to as a data dictionary. With the transition of needs for the metadata usage for business intelligence has increased so is the scope of the metadata repository increased. Earlier data dictionaries are the closest place to interact technology with business. Data dictionaries are the universe of metadata repository in the initial stages but as the scope increased Business glossary and their tags to variety of status flags emerged in the business side while consumption of the technology metadata, their lineage and linkages made the repository, the source for valuable reports to bring business and technology together and helped data management decisions easier as well as assess the cost of the changes. Metadata repository explores the enterprise wide data governance, data quality and master data management (includes master data and reference data) and integrates this wealth of information with integrated metadata across the organization to provide decision support system for data structures, even though it only reflects the structures consumed from various systems. == Repository vs. registry == Repository has additional functionalities compared with registry. Metadata repository not only stores metadata like Metadata registry but also adds relationships with related metadata types. Metadata when related in a flow from its point of entry into organization up to the deliverables is considered as the lineage of that data point. Metadata when related across other related metadata types is called linkages. By providing the relationships to all the metadata points across the organization and maintaining its integrity with an architecture to handle the changes, metadata repository provides the basic material for understanding the complete data flow and their definitions and their impact. Also the important feature is to maintain the version control though this statement for contrasting is open for discussion. These definitions are still evolving, so the accuracy of the definitions needs refinement. The purpose of registry is to define the metadata element and maintained across the organization. And data models and other data management teams refer to the registry for any changes to follow. While Metadata repository sources metadata from various metadata systems in the organizations and reflects what is in the upstream. Repository never acts as an upstream while registry is used as an upstream for metadata changes. == Reason for use == Metadata repository enables all the structure of the organizations data containers to one integrated place. This opens plethora of resourceful information for making calculated business decisions. This tool uses one generic form of data model to integrate all the models thus brings all the applications and programs of the organization into one format. And on top of it applying the business definitions and business processes brings the business and technology closer that will help organizations make reliable roadmaps with definite goals. With one stop information, business will have more control on the changes, and can do impact analysis of the tool. Usually business spends much time and money to make decisions based on discovery and research on impacts to make changes or to add new data structures or remove structures in data management of the organization. With a structured and well maintained repository, moving the product from ideation to delivery takes the least amount of time (considering other variables are constant). To sum it up: Integration of the metadata across the organization Build relationship between various metadata types Build relationship between various disparate systems Define business golden copy of definitions Version control of the changes at structure level Interaction with Reference data Link view to master data Automatic synchronization with various authorized metadata source systems More control to business decisions Validate the structures by overlapping the models Discovering discrepancies, gaps, lineage, metrics at data structure level Each database management system (DBMS) and database tools have their own language for the metadata components within. Database applications already have their own repositories or registries that are expected to provide all of the necessary functionality to access the data stored within. Vendors do not want other companies to be capable of easily migrating data away from their products and into competitors products, so they are proprietary with the way they handle metadata. CASE tools, DBMS dictionaries, ETL tools, data cleansing tools, OLAP tools, and data mining tools all handle and store metadata differently. Only a metadata repository can be designed to store the metadata components from all of these tools. == Design == Metadata repositories should store metadata in four classifications: ownership, descriptive characteristics, rules and policies, and physical characteristics. Ownership, showing the data owner and the application owner. The descriptive characteristics, define the names, types and lengths, and definitions describing business data or business processes. Rules and policies, will define security, data cleanliness, timelines for data, and relationships. Physical characteristics define the origin or source, and physical location. Like building a logical data model for creating a database, a logical meta model can help identify the metadata requirements for business data. The metadata repository will be centralized, decentralized, or distributed. A centralized design means that there is one database for the metadata repository that stores metadata for all applications business wide. A centralized metadata repository has the same advantages and disadvantages of a centralized database. Easier to manage because all the data is in one database, but the disadvantage is that bottlenecks may occur. A decentralized metadata repository stores metadata in multiple databases, either separated by location and or departments of the business. This makes management of the repository more involved than a centraliz

    Read more →
  • No Thanks (app)

    No Thanks (app)

    No Thanks is a Palestinian boycott-awareness mobile application developed by Palestinian software engineer Ahmed Bashbash, created to assist consumers in identifying and boycotting products associated with companies linked to Israel. Launched in 13 November 2023, the app gained significant attention amid the Gaza–Israel conflict. == History == No Thanks is a mobile application developed by Ahmed Bashbash, a Palestinian software engineer from Gaza residing in Hungary. The app was conceived in October 2023 following the death of Bashbash's brother in an Israeli airstrike on October 31, 2023. His sister had previously died in 2020 due to delayed medical treatment. The app was officially launched on November 13, 2023, and quickly gained traction, got over 100,000 downloads within its first month of release. On November 30, 2023, Google removed the app from its Play Store due to a violation of its content policies. The app's home page included a description: "Welcome to No Thanks, here you can see if the product in your hand supports killing children in Palestine or not," which was deemed to contravene Google's guidelines on hate speech and sensitive content. On December 3, 2023, following changes to the app's description, Google reinstated the app.

    Read more →
  • DataViva

    DataViva

    DataViva is an information visualization engine created by the Strategic Priorities Office of the government of Minas Gerais. DataViva makes official data about exports, industries, locations and occupations available for the entirety of Brazil through eight apps and more than 100 million possible visualizations. The first set of datum – also available at ALICEWEB – is provided by MDIC (Ministry of Development, Industry and Foreign Trade) / SECEX (Secretariat of Foreign Trade), an official institution of the Government of Brazil and shows foreign trade statistics for all exporting municipalities in the country. The other database, provided by Ministério do Trabalho e Emprego (MTE – Ministry of Labor and Employment), shows information about all the industries and occupations in Brazil (RAIS – Annual Social Information Report). The platform consists of eight core applications, each of which allows different ways of visualizing the data available. Some applications are descriptive, that is, showing data aggregated at various levels in a simple and comparative way, such as Treemapping. Others are prescriptive, using calculations that allow an analytic visualization of the data, based on theories such as the Product Space. All the applications are generated using D3plus, an open source JavaScript library built on top of D3.js by Alexander Simoes and Dave Landry. Inspired by The Observatory of Economic Complexity, DataViva is an open data, open-source, and free to use tool. It was developed in a partnership with Datawheel, co-founded by MIT Media Lab Professor César Hidalgo, and is maintained by the Government of Minas Gerais.

    Read more →
  • Sanctuary (app)

    Sanctuary (app)

    Sanctuary is a mobile app focusing on astrology and mystical services. Users enter their birthday, time of birth, and place of birth information into the app and receive a birth chart as well as daily horoscope readings. Users can also sign up for a monthly membership and receive on-demand astrological readings via a text message format. The service has been described as being “Talkspace for astrology" and "Uber for astrological readings". The mobile app uses an A.I.-driven interface. On May 14, 2019, Apple featured Sanctuary as the App of the Day. == History == Sanctuary initially began as project within the incubator of Lorne Michaels’ Broadway Video Ventures. The app officially launched on March 21, 2019. Its backers include Broadway Video Ventures, Greycroft Partners, and Shari Redstone.

    Read more →
  • Supermind AI

    Supermind AI

    Supermind is a state-funded Chinese artificial intelligence platform that tracks scientists and researchers internationally. The platform is the flagship project of Shenzhen's International Science and Technology Information Center. It mines data from science and technology databases such as Springer, Wiley, Clarivate and Elsevier. It is intended to detect technological breakthroughs and to identify possible sources of talent as part of China's efforts to advance technologically. The platform also uses government data security and security intelligence organizations such as Peng Cheng Laboratory, the China National GeneBank, BGI Group and the Key Laboratory of New Technologies of Security Intelligence. According to Hong Kong-based Asia Times, the platform, "While not an overt espionage tool...may be used to identify key personnel who could be bribed, deceived or manipulated into divulging classified information". The Organisation for Economic Co-operation and Development (OECD) flagged the project as an incident, meaning it may be of interest to policymakers and other stakeholders. US technology group American Edge Project criticized the project as a global risk of China's security services using the platform to place agents in jobs with access to important information, recruit technical personnel, and identify targets for hacking operations.

    Read more →
  • Score bug

    Score bug

    A score bug is a digital on-screen graphic which is displayed in a broadcast of a sporting event, displaying the current score and other statistics. It is similar in function to a scoreboard, and is usually placed at either the top or lower third of the television screen. == History == The concept of a persistent score bug was devised by Sky Sports head David Hill, who was dissatisfied over having to wait to see what the score was after tuning into a football match in-progress. The score bug was introduced when Sky launched its coverage of the then newly-formed English Premier League in August 1992. Hill's boss repeatedly demanded that the graphic be removed, describing it as the "stupidest thing [he] had ever seen". Hill defied the boss's demands and kept the graphic in place. ITV introduced a score bug at the start of the 1993–94 football season, and the BBC introduced a score bug towards the end of 1993. The concept was introduced to the United States by ABC Sports and ESPN during coverage of the 1994 FIFA World Cup. Their justification for the graphic was to provide a location for a rotating series of sponsor logos, in order to allow matches to air without commercial interruption. With the acquisition of rights to the National Football League (NFL) by BSkyB's American sibling Fox (a fellow venture of Rupert Murdoch), Hill became the first president of Fox Sports. Under Hill's leadership, Fox introduced a version of the score bug branded as the "Fox Box", which was part of its inaugural season of NFL coverage in 1994. Variety criticized it as an "annoying see-through clock and score graphic" and expressed concern for people "who actually watched the beginning of the game and would rather have their screen clear of graphics". Hill even received a death threat from an irate viewer, with a specific emphasis on him being a "foreigner", but the score bug soon became a ubiquitous feature for American football broadcasts, along with almost all American sports broadcasts in the years that followed. Dick Ebersol of NBC Sports initially opposed the idea of a score bug, as he thought that fans would dislike seeing more graphics on the screen and would change the channel from blowout games if the score was constantly being displayed. Since the 2010s, the on-air design and positioning of some score bugs have been influenced by the needs of Internet video (especially when viewing an event on devices with smaller screens), including bugs noticeably larger than prior iterations designed with television viewing in mind, or designs primarily kept towards the bottom-center of the screen (easing the ability for the bug to remain visible when highlights are cropped for square videos posted on social media). == Details == Score bugs used in team sports typically include the names of both teams, an abbreviation of the team's name, and/or the team's logo; for individual sports, they include the names of individual competitors. In sports where a game clock or playing periods are used, those are generally also displayed as part of the score bug. Some broadcasts also include teams' win-loss records. In 2024, ESPN experimented with adding a persistent win probability meter to its bug in Major League Baseball, which was based on input from its statisticians. === Variations === In addition to the above information, score bugs in some sports include additional information: In baseball, score bugs display the current inning, number of outs, the pitch clock if applicable, and a graphic displaying which bases are occupied; and usually include names of the current pitcher and batter, the pitcher's pitch count, and the number of balls and strikes accrued by the batter. In basketball, score bugs generally include the shot clock, the number of fouls accrued by each team, and whether a team is in the bonus. In cricket, score bugs often take the form of larger dashboards across the bottom of the screen, displaying the current team up and their number of runs, wickets, and overs, a display showing the runs scored and number of balls faced by the current batting partnership, and statistics for the opposing team's bowler (including the number of wickets scored and runs given up). In American football, score bugs usually include the play clock and the down and distance of the current play; they also incorporate graphics indicating when a penalty flag has been thrown. In ice hockey, score bugs display when a penalty or power play is in effect, and often include the number of shots on goal accrued by each team. In golf, Fox popularized the display of a persistent leaderboard graphic in the bottom-right of the screen, usually displaying the top 5. ==== Racing ==== Telecasts of automobile races often include a score bug with the current positions of participants, statistics such as distance behind the leader, and the remaining distance or number of laps. In the mid-2010s, NASCAR broadcasters such as Fox began to transition from horizontal tickers to vertical leaderboards (also referred to as "pylons", in reference to the physical scoring pylons at). The CW differentiated itself by using a horizontal display that divides the field into multiple columns along the bottom of the screen.

    Read more →
  • Database-as-IPC

    Database-as-IPC

    In computer programming, Database-as-IPC may be considered an anti-pattern where a disk persisted table in a database is used as the message queue store for routine inter-process communication (IPC) or subscribed data processing. If database performance is of concern, alternatives include sockets, network socket, or message queue. British computer scientist, Junade Ali, defined the Database-as-IPC Anti-Pattern as using a database to "schedule jobs or queue up tasks to be completed", noting that this anti-pattern centres around using a database for temporary messages instead of persistent data. == Controversy == The issue arises if there is a performance issue, and if additional systems (and servers) can be justified. In terms of performance, recent advancements in database systems provide more efficient mechanisms for signaling and messaging, and database systems also support memory (non-persisted) tables. There are databases with built-in notification mechanisms, such as PostgreSQL, SQL Server, and Oracle. These mechanisms and future improvements of database systems can make queuing much more efficient and avoid the need to set up a separate signaling or messaging queue system along with the server and management overhead. While MySQL doesn't have direct support for notifications, some workarounds are possible. However, they would be seen as non-standard and therefore more difficult to maintain.

    Read more →