AI Chatbot Emochi

AI Chatbot Emochi — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Chinchilla (language model)

Chinchilla is a family of large language models (LLMs) developed by the research team at Google DeepMind, presented in March 2022. == Models == It is named "chinchilla" because it is a further development over a previous model family named Gopher. Both model families were trained in order to investigate the scaling laws of large language models. It claimed to outperform GPT-3. It considerably simplifies downstream utilization because it requires much less computer power for inference and fine-tuning. Based on the training of previously employed language models, it has been determined that if one doubles the model size, one must also have twice the number of training tokens. This hypothesis has been used to train Chinchilla by DeepMind. Similar to Gopher in terms of cost, Chinchilla has 70B parameters and four times as much data. Chinchilla has an average accuracy of 67.5% on the Measuring Massive Multitask Language Understanding (MMLU) benchmark, which is 7% higher than Gopher's performance. Chinchilla was still in the testing phase as of January 12, 2023. Chinchilla contributes to developing an effective training paradigm for large autoregressive language models with limited compute resources. The Chinchilla team recommends that the number of training tokens is twice for every model size doubling, meaning that using larger, higher-quality training datasets can lead to better results on downstream tasks. It has been used for the Flamingo vision-language model. == Architecture == Both the Gopher family and Chinchilla family are families of transformer models. In particular, they are essentially the same as GPT-2, with different sizes and minor modifications. Gopher family uses RMSNorm instead of LayerNorm; relative positional encoding rather than absolute positional encoding. The Chinchilla family is the same as the Gopher family, but trained with AdamW instead of Adam optimizer. The Gopher family contains six models of increasing size, from 44 million parameters to 280 billion parameters. They refer to the largest one as "Gopher" by default. Similar naming conventions apply for the Chinchilla family. Table 1 of shows the entire Gopher family: Table 4 of compares the 70-billion-parameter Chinchilla with Gopher 280B.
Read more →
Pixel-art scaling algorithms

Pixel art scaling algorithms are graphical filters that attempt to enhance the appearance of hand-drawn 2D pixel art graphics. These algorithms are a form of automatic image enhancement. Pixel art scaling algorithms employ methods significantly different than the common methods of image rescaling, which have the goal of preserving the appearance of images. As pixel art graphics are commonly used at very low resolutions, they employ careful coloring of individual pixels. This results in graphics that rely on a high amount of stylized visual cues to define complex shapes. Several specialized algorithms have been developed to handle re-scaling of such graphics. These specialized algorithms can improve the appearance of pixel-art graphics, but in doing so they introduce changes. Such changes may be undesirable, especially if the goal is to faithfully reproduce the original appearance. Since a typical application of this technology is improving the appearance of fourth-generation and earlier video games on arcade and console emulators, many pixel art scaling algorithms are designed to run in real-time for sufficiently small input images at 60-frames per second. This places constraints on the type of programming techniques that can be used for this sort of real-time processing. Many work only on specific scale factors. 2× is the most common scale factor, while 3×, 4×, 5×, and 6× exist but are less used. == Algorithms == === SAA5050 'Diagonal Smoothing' === The Mullard SAA5050 Teletext character generator chip (1980) used a primitive pixel scaling algorithm to generate higher-resolution characters on the screen from a lower-resolution representation from its internal ROM. Internally, each character shape was defined on a 5 × 9 pixel grid, which was then interpolated by smoothing diagonals to give a 10 × 18 pixel character, with a characteristically angular shape, surrounded to the top and the left by two pixels of blank space. The algorithm only works on monochrome source data, and assumes the source pixels will be logically true or false depending on whether they are 'on' or 'off'. Pixels 'outside the grid pattern' are assumed to be off. The algorithm works as follows: A B C --\ 1 2 D E F --/ 3 4 1 = B | (A & E & !B & !D) 2 = B | (C & E & !B & !F) 3 = E | (!A & !E & B & D) 4 = E | (!C & !E & B & F) Note that this algorithm, like the Eagle algorithm below, has a flaw: If a pattern of 4 pixels in a hollow diamond shape appears, the hollow will be obliterated by the expansion. The SAA5050's internal character ROM carefully avoids ever using this pattern. The degenerate case: becomes: === EPX/Scale2×/AdvMAME2× === Eric's Pixel Expansion (EPX) is an algorithm developed by Eric Johnston at LucasArts around 1992, when porting the SCUMM engine games from the IBM PC (which ran at 320 × 200 × 256 colors) to the early color Macintosh computers, which ran at more or less double that resolution. The algorithm works as follows, expanding P into 4 new pixels based on P's surroundings: 1=P; 2=P; 3=P; 4=P; IF C==A => 1=A IF A==B => 2=B IF D==C => 3=C IF B==D => 4=D IF of A, B, C, D, three or more are identical: 1=2=3=4=P Later implementations of this same algorithm (as AdvMAME2× and Scale2×, developed around 2001) are slightly more efficient but functionally identical: 1=P; 2=P; 3=P; 4=P; IF C==A AND C!=D AND A!=B => 1=A IF A==B AND A!=C AND B!=D => 2=B IF D==C AND D!=B AND C!=A => 3=C IF B==D AND B!=A AND D!=C => 4=D AdvMAME2× is available in DOSBox via the scaler=advmame2x dosbox.conf option. The AdvMAME4×/Scale4× algorithm is just EPX applied twice to get 4× resolution. ==== Scale3×/AdvMAME3× and ScaleFX ==== The AdvMAME3×/Scale3× algorithm (available in DOSBox via the scaler=advmame3x dosbox.conf option) can be thought of as a generalization of EPX to the 3× case. The corner pixels are calculated identically to EPX. 1=E; 2=E; 3=E; 4=E; 5=E; 6=E; 7=E; 8=E; 9=E; IF D==B AND D!=H AND B!=F => 1=D IF (D==B AND D!=H AND B!=F AND E!=C) OR (B==F AND B!=D AND F!=H AND E!=A) => 2=B IF B==F AND B!=D AND F!=H => 3=F IF (H==D AND H!=F AND D!=B AND E!=A) OR (D==B AND D!=H AND B!=F AND E!=G) => 4=D 5=E IF (B==F AND B!=D AND F!=H AND E!=I) OR (F==H AND F!=B AND H!=D AND E!=C) => 6=F IF H==D AND H!=F AND D!=B => 7=D IF (F==H AND F!=B AND H!=D AND E!=G) OR (H==D AND H!=F AND D!=B AND E!=I) => 8=H IF F==H AND F!=B AND H!=D => 9=F There is also a variant improved over Scale3× called ScaleFX, developed by Sp00kyFox, and a version combined with Reverse-AA called ScaleFX-Hybrid. === Eagle === Eagle works as follows: for every in pixel, we will generate 4 out pixels. First, set all 4 to the color of the pixel we are currently scaling (as nearest-neighbor). Next look at the three pixels above, to the left, and diagonally above left: if all three are the same color as each other, set the top left pixel of our output square to that color in preference to the nearest-neighbor color. Work similarly for all four pixels, and then move to the next one. Assume an input matrix of 3 × 3 pixels where the centermost pixel is the pixel to be scaled, and an output matrix of 2 × 2 pixels (i.e., the scaled pixel) first: |Then . . . --\ CC |S T U --\ 1 2 . C . --/ CC |V C W --/ 3 4 . . . |X Y Z | IF V==S==T => 1=S | IF T==U==W => 2=U | IF V==X==Y => 3=X | IF W==Z==Y => 4=Z Thus if we have a single black pixel on a white background it will vanish. This is a bug in the Eagle algorithm but is solved by other algorithms such as EPX, 2xSaI, and HQ2x. === 2×SaI === 2×SaI, short for 2× Scale and Interpolation engine, was inspired by Eagle. It was designed by Derek Liauw Kie Fa, also known as Kreed, primarily for use in console and computer emulators, and it has remained fairly popular in this niche. Many of the most popular emulators, including ZSNES and VisualBoyAdvance, offer this scaling algorithm as a feature. Several slightly different versions of the scaling algorithm are available, and these are often referred to as Super 2×SaI and Super Eagle. The 2xSaI family works on a 4 × 4 matrix of pixels where the pixel marked A below is scaled: I E F J G A B K --\ W X H C D L --/ Y Z M N O P For 16-bit pixels, they use pixel masks which change based on whether the 16-bit pixel format is 565 or 555. The constants colorMask, lowPixelMask, qColorMask, qLowPixelMask, redBlueMask, and greenMask are 16-bit masks. The lower 8 bits are identical in either pixel format. Two interpolation functions are described: INTERPOLATE(uint32 A, UINT32 B). -- linear midpoint of A and B if (A == B) return A; return ( ((A & colorMask) >> 1) + ((B & colorMask) >> 1) + (A & B & lowPixelMask) ); Q_INTERPOLATE(uint32 A, uint32 B, uint32 C, uint32 D) -- bilinear interpolation; A, B, C, and D's average x = ((A & qColorMask) >> 2) + ((B & qColorMask) >> 2) + ((C & qColorMask) >> 2) + ((D & qColorMask) >> 2); y = (A & qLowPixelMask) + (B & qLowPixelMask) + (C & qLowPixelMask) + (D & qLowPixelMask); y = (y >> 2) & qLowPixelMask; return x + y; The algorithm checks A, B, C, and D for a diagonal match such that A==D and B!=C, or the other way around, or if they are both diagonals or if there is no diagonal match. Within these, it checks for three or four identical pixels. Based on these conditions, the algorithm decides whether to use one of A, B, C, or D, or an interpolation among only these four, for each output pixel. The 2xSaI arbitrary scaler can enlarge any image to any resolution and uses bilinear filtering to interpolate pixels. Since Kreed released the source code under the GNU General Public License, it is freely available to anyone wishing to utilize it in a project released under that license. Developers wishing to use it in a non-GPL project would be required to rewrite the algorithm without using any of Kreed's existing code. It is available in DOSBox via scaler=2xsai option. === hqnx family === Maxim Stepin's hq2x, hq3x, and hq4x are for scale factors of 2:1, 3:1, and 4:1 respectively. Each work by comparing the color value of each pixel to those of its eight immediate neighbors, marking the neighbors as close or distant, and using a pre-generated lookup table to find the proper proportion of input pixels' values for each of the 4, 9 or 16 corresponding output pixels. The hq3x family will perfectly smooth any diagonal line whose slope is ±0.5, ±1, or ±2 and which is not anti-aliased in the input; one with any other slope will alternate between two slopes in the output. It will also smooth very tight curves. Unlike 2xSaI, it anti-aliases the output. hqnx was initially created for the Super NES emulator ZSNES. The author of bsnes has released a space-efficient implementation of hq2x to the public domain. A port to shaders, which has comparable quality to the early versions of xBR, is available. Before the port, a shader called "scalehq" has often been confused for hqx. === xBR family === There are 6 filters in this family: xBR , xBRZ, xBR-Hybrid, Super xBR, xBR+3D and Super xBR+3D. xBR ("scale by rules"), cre
Read more →
GamePigeon

GamePigeon is a mobile app for iOS devices, developed by Vitalii Zlotskii and released on September 13, 2016. The game takes advantage of the iOS 10 update, which expanded how users could interact with Apple's Messages app. GamePigeon is only available through the Messages app, which allows players to start and respond to different party games in conversations. == Release == The app was first released on September 13, 2016, coinciding with the launch of iOS 10. The app was released for free, although it includes in-app purchases to unlock additional items, such as cosmetic skins, avatar items, new game modes, and an option to remove ads. == Games in the app == The following is a list of games that users can play within GamePigeon: Sources: Poker was one of the games included in GamePigeon at launch, although it has since been removed and is no longer listed on the game's App Store description. == Reception == GamePigeon has enjoyed commercial success, with VentureBeat noting that GamePigeon was ranked number-one in the "Top Free" category of the iMessage App Store, six months after its release. Critically, GamePigeon has been generally well received, being highlighted by online media publications early on shortly after the iOS 10 launch. It has since been included on many "best iMessage apps" lists. Based on over 162,000 ratings, the game holds a 4.0 out of 5 rating on the App Store. Julian Chokkattu of Digital Trends wrote "GamePigeon should be like the pre-installed versions of Solitaire and Minesweeper that used to come with older iterations of Windows." On its launch day, Boy Genius Report included it on a list of "10 of the best iMessage apps, games and stickers for iOS 10 on launch day." The Daily Dot wrote, "GamePigeon is easily the best current gaming option within iMessages." 8-ball and cup pong have been particularly well received by media outlets. The Daily Dot had specific praise for the app's billiards game: "8-Ball controls shockingly smoothly with your fingers, and there’s nothing quite like destroying a dear friend in poker." During his 2020 U.S. presidential campaign, Cory Booker was cited as playing the game with his family. In 2017, CNBC cited one teenager who expressed that GamePigeon was one of just a few reasons that those in her age range use the iMessage app. The game has received particular positive reception for allowing introverted individuals to exercise a form social activity; similarly, the game was highlighted as a way to maintain social distancing guidelines during the COVID-19 pandemic. As an April Fools' Day joke in 2020, The Chronicle, a Duke University newspaper, published that Duke's athletic program adopted GamePigeon's Cup Pong as an official varsity sport.
Read more →
ViEWER

ViEWER, the Virtual Environment Workbench for Education and Research, is a proprietary, freeware computer program for Microsoft Windows written by researchers at the University of Idaho for the study of visual perception and complex immersive three-dimensional environments. It was created using C++ and OpenGL, and has been used by Dr. Brian Dyre, Dr. Steffen Werner, Dr. Ernesto Bustamante, Dr. Ben Barton, and their undergraduate and graduate researchers in visual perception, signal detection, and child-safety experiments.
Read more →
EM algorithm and GMM model

In statistics, EM (expectation maximization) algorithm handles latent variables, while GMM is the Gaussian mixture model. == Background == In the picture below, are shown the red blood cell hemoglobin concentration and the red blood cell volume data of two groups of people, the Anemia group and the control group (i.e. the group of people without Anemia). As expected, people with Anemia have lower red blood cell volume and lower red blood cell hemoglobin concentration than those without Anemia. x {\displaystyle x} is a random vector such as x := ( red blood cell volume , red blood cell hemoglobin concentration ) {\displaystyle x:={\big (}{\text{red blood cell volume}},{\text{red blood cell hemoglobin concentration}}{\big )}} , and from medical studies it is known that x {\displaystyle x} are normally distributed in each group, i.e. x ∼ N ( μ , Σ ) {\displaystyle x\sim {\mathcal {N}}(\mu ,\Sigma )} . z {\displaystyle z} is denoted as the group where x {\displaystyle x} belongs, with z i = 0 {\displaystyle z_{i}=0} when x i {\displaystyle x_{i}} belongs to the Anemia group and z i = 1 {\displaystyle z_{i}=1} when x i {\displaystyle x_{i}} belongs to the control group. Also z ∼ Categorical ⁡ ( k , ϕ ) {\displaystyle z\sim \operatorname {Categorical} (k,\phi )} where k = 2 {\displaystyle k=2} , ϕ j ≥ 0 , {\displaystyle \phi _{j}\geq 0,} and ∑ j = 1 k ϕ j = 1 {\displaystyle \sum _{j=1}^{k}\phi _{j}=1} . See Categorical distribution. The following procedure can be used to estimate ϕ , μ , Σ {\displaystyle \phi ,\mu ,\Sigma } . A maximum likelihood estimation can be applied: ℓ ( ϕ , μ , Σ ) = ∑ i = 1 m log ⁡ ( p ( x ( i ) ; ϕ , μ , Σ ) ) = ∑ i = 1 m log ⁡ ∑ z ( i ) = 1 k p ( x ( i ) ∣ z ( i ) ; μ , Σ ) p ( z ( i ) ; ϕ ) {\displaystyle \ell (\phi ,\mu ,\Sigma )=\sum _{i=1}^{m}\log(p(x^{(i)};\phi ,\mu ,\Sigma ))=\sum _{i=1}^{m}\log \sum _{z^{(i)}=1}^{k}p\left(x^{(i)}\mid z^{(i)};\mu ,\Sigma \right)p(z^{(i)};\phi )} As the z i {\displaystyle z_{i}} for each x i {\displaystyle x_{i}} are known, the log likelihood function can be simplified as below: ℓ ( ϕ , μ , Σ ) = ∑ i = 1 m log ⁡ p ( x ( i ) ∣ z ( i ) ; μ , Σ ) + log ⁡ p ( z ( i ) ; ϕ ) {\displaystyle \ell (\phi ,\mu ,\Sigma )=\sum _{i=1}^{m}\log p\left(x^{(i)}\mid z^{(i)};\mu ,\Sigma \right)+\log p\left(z^{(i)};\phi \right)} Now the likelihood function can be maximized by making partial derivative over μ , Σ , ϕ {\displaystyle \mu ,\Sigma ,\phi } , obtaining: ϕ j = 1 m ∑ i = 1 m 1 { z ( i ) = j } {\displaystyle \phi _{j}={\frac {1}{m}}\sum _{i=1}^{m}1\{z^{(i)}=j\}} μ j = ∑ i = 1 m 1 { z ( i ) = j } x ( i ) ∑ i = 1 m 1 { z ( i ) = j } {\displaystyle \mu _{j}={\frac {\sum _{i=1}^{m}1\{z^{(i)}=j\}x^{(i)}}{\sum _{i=1}^{m}1\left\{z^{(i)}=j\right\}}}} Σ j = ∑ i = 1 m 1 { z ( i ) = j } ( x ( i ) − μ j ) ( x ( i ) − μ j ) T ∑ i = 1 m 1 { z ( i ) = j } {\displaystyle \Sigma _{j}={\frac {\sum _{i=1}^{m}1\{z^{(i)}=j\}(x^{(i)}-\mu _{j})(x^{(i)}-\mu _{j})^{T}}{\sum _{i=1}^{m}1\{z^{(i)}=j\}}}} If z i {\displaystyle z_{i}} is known, the estimation of the parameters results to be quite simple with maximum likelihood estimation. But if z i {\displaystyle z_{i}} is unknown it is much more complicated. Being z {\displaystyle z} a latent variable (i.e. not observed), with unlabeled scenario, the expectation maximization algorithm is needed to estimate z {\displaystyle z} as well as other parameters. Generally, this problem is set as a GMM since the data in each group is normally distributed. In machine learning, the latent variable z {\displaystyle z} is considered as a latent pattern lying under the data, which the observer is not able to see very directly. x i {\displaystyle x_{i}} is the known data, while ϕ , μ , Σ {\displaystyle \phi ,\mu ,\Sigma } are the parameter of the model. With the EM algorithm, some underlying pattern z {\displaystyle z} in the data x i {\displaystyle x_{i}} can be found, along with the estimation of the parameters. The wide application of this circumstance in machine learning is what makes EM algorithm so important. == EM algorithm in GMM == The EM algorithm consists of two steps: the E-step and the M-step. Firstly, the model parameters and the z ( i ) {\displaystyle z^{(i)}} can be randomly initialized. In the E-step, the algorithm tries to guess the value of z ( i ) {\displaystyle z^{(i)}} based on the parameters, while in the M-step, the algorithm updates the value of the model parameters based on the guess of z ( i ) {\displaystyle z^{(i)}} of the E-step. These two steps are repeated until convergence is reached. The algorithm in GMM is: Repeat until convergence: 1. (E-step) For each i , j {\displaystyle i,j} , set w j ( i ) := p ( z ( i ) = j | x ( i ) ; ϕ , μ , Σ ) {\displaystyle w_{j}^{(i)}:=p\left(z^{(i)}=j|x^{(i)};\phi ,\mu ,\Sigma \right)} 2. (M-step) Update the parameters ϕ j := 1 m ∑ i = 1 m w j ( i ) {\displaystyle \phi _{j}:={\frac {1}{m}}\sum _{i=1}^{m}w_{j}^{(i)}} μ j := ∑ i = 1 m w j ( i ) x ( i ) ∑ i = 1 m w j ( i ) {\displaystyle \mu _{j}:={\frac {\sum _{i=1}^{m}w_{j}^{(i)}x^{(i)}}{\sum _{i=1}^{m}w_{j}^{(i)}}}} Σ j := ∑ i = 1 m w j ( i ) ( x ( i ) − μ j ) ( x ( i ) − μ j ) T ∑ i = 1 m w j ( i ) {\displaystyle \Sigma _{j}:={\frac {\sum _{i=1}^{m}w_{j}^{(i)}\left(x^{(i)}-\mu _{j}\right)\left(x^{(i)}-\mu _{j}\right)^{T}}{\sum _{i=1}^{m}w_{j}^{(i)}}}} With Bayes' rule, the following result is obtained by the E-step: p ( z ( i ) = j | x ( i ) ; ϕ , μ , Σ ) = p ( x ( i ) | z ( i ) = j ; μ , Σ ) p ( z ( i ) = j ; ϕ ) ∑ l = 1 k p ( x ( i ) | z ( i ) = l ; μ , Σ ) p ( z ( i ) = l ; ϕ ) {\displaystyle p\left(z^{(i)}=j|x^{(i)};\phi ,\mu ,\Sigma \right)={\frac {p\left(x^{(i)}|z^{(i)}=j;\mu ,\Sigma \right)p\left(z^{(i)}=j;\phi \right)}{\sum _{l=1}^{k}p\left(x^{(i)}|z^{(i)}=l;\mu ,\Sigma \right)p\left(z^{(i)}=l;\phi \right)}}} According to GMM setting, these following formulas are obtained: p ( x ( i ) | z ( i ) = j ; μ , Σ ) = 1 ( 2 π ) n / 2 | Σ j | 1 / 2 exp ⁡ ( − 1 2 ( x ( i ) − μ j ) T Σ j − 1 ( x ( i ) − μ j ) ) {\displaystyle p\left(x^{(i)}|z^{(i)}=j;\mu ,\Sigma \right)={\frac {1}{(2\pi )^{n/2}\left|\Sigma _{j}\right|^{1/2}}}\exp \left(-{\frac {1}{2}}\left(x^{(i)}-\mu _{j}\right)^{T}\Sigma _{j}^{-1}\left(x^{(i)}-\mu _{j}\right)\right)} p ( z ( i ) = j ; ϕ ) = ϕ j {\displaystyle p\left(z^{(i)}=j;\phi \right)=\phi _{j}} In this way, a switch between the E-step and the M-step is possible, according to the randomly initialized parameters.
Read more →
Audio-visual speech recognition

Audio visual speech recognition (AVSR) is a technique that uses image processing capabilities in lip reading to aid speech recognition systems in recognizing indeterministic phones or giving preponderance among near probability decisions. Each system of lip reading and speech recognition works separately, then their results are mixed at the stage of feature fusion. As the name suggests, it has two parts. First one is the audio part and second one is the visual part. In audio part we use features like log mel spectrogram, mfcc etc. from the raw audio samples and we build a model to get feature vector out of it . For visual part generally we use some variant of convolutional neural network to compress the image to a feature vector after that we concatenate these two vectors (audio and visual ) and try to predict the target object.
Read more →
Adobe ImageReady

Adobe ImageReady was a bitmap graphics editor that was shipped with Adobe Photoshop for six years. It was available for Windows, Classic Mac OS and Mac OS X from 1998 to 2007. ImageReady was designed for web development and closely interacted with Photoshop. == Function == ImageReady was designed for web development rather than effects-intensive photo manipulation. To that end, ImageReady has specialized features such as animated GIF creation, image compression optimization, image slicing, adding rollover effects, and HTML generation. Photoshop versions with which ImageReady was released have an "Edit in ImageReady" button that enables editing of image directly in ImageReady. ImageReady, in turn, has an "Edit in Photoshop" button. ImageReady has strong resemblances to Photoshop; it can even use the same set of Photoshop filters. One set of tools that does not resemble the Photoshop tools, however, is the Image Map set of tools, indicated by a shape or arrow with a hand that varied depending upon the version. This toolbox has several features not found in Photoshop, including: Toggle Image Map Visibility and Toggle Slice Visibility tools: toggle between showing and hiding image maps and slices, respectively Export Animation Frames as Files option: saves all or specified frames for an alternate use, e.g., to e-mail slides for review Preview Document tool: provides a preview of rollover effects in ImageReady rather than previewing them in a browser Preview in Default Browser tool: previews the image in a browser, including any rollover or animation effects Edit in Photoshop button: opens the current image in Photoshop == History == Adobe ImageReady 1.0 was released in July 1998 as a standalone application. Version 2.0 was packaged with Photoshop 5.5, and the program was included with Photoshop through version 9.0 (CS2). Starting with Photoshop 7.0, Adobe changed the version numbers of ImageReady to match. With the release of the Creative Suite 3, ImageReady was discontinued. According to Adobe, ImageReady's most popular features were merged into Photoshop. (Even before discontinuation, some of ImageReady's web optimization functionality could be found in Photoshop's Save For Web & Devices tool.) Around the same time, Adobe purchased rival software developer Macromedia, whose application Fireworks had been a competitor to ImageReady.
Read more →
PCVC Speech Dataset

The PCVC (Persian Consonant Vowel Combination) Speech Dataset is a Modern Persian speech corpus for speech recognition and also speaker recognition. The dataset contains sound samples of Modern Persian combination of vowel and consonant phonemes from different speakers. Every sound sample contains just one consonant and one vowel So it is somehow labeled in phoneme level. This dataset consists of 23 Persian consonants and 6 vowels. The sound samples are all possible combinations of vowels and consonants (138 samples for each speaker). The sample rate of all speech samples is 48000 which means there are 48000 sound samples in every 1 second. Every sound sample starts with consonant then continues with vowel. In each sample, in average, 0.5 second of each sample is speech and the rest is silence. Each sound sample ends with silence. All of sound samples are denoised with "Adaptive noise reduction" algorithm. Compared to Farsdat speech dataset and Persian speech corpus it is more easy to use because it is prepared in .mat data files. Also it is more based on phoneme based separation and all samples are denoised. == Contents == The corpus is downloadable from its Kaggle web page, and contains the following: .mat data files of sound samples in a 23630000 matrix, in which 23 is number of consonants, 6 is the number of vowels and 30000 is the length of sound sample.
Read more →
Nuance Communications

Nuance Communications, Inc. was an American multinational computer software technology corporation, headquartered in Burlington, Massachusetts, that markets speech recognition and artificial intelligence software. Nuance merged with its competitor in the commercial large-scale speech application business, ScanSoft, in October 2005. ScanSoft was a Xerox spin-off that was bought in 1999 by Visioneer, a hardware and software scanner company, which adopted ScanSoft as the new merged company name. The original ScanSoft had its roots in Kurzweil Computer Products. In April 2021, Microsoft announced it would buy Nuance Communications. The deal is an all-cash transaction of $19.7 billion, including company debt, or $56 per share. The acquisition was completed in March 2022. == History == The Speech Technology and Research (STAR) Laboratory at SRI International began the journey that, in 1994, resulted in a spin-off company; Corona Corporation (later renamed to Nuance Communications ). Nuance Communications (NUAN) went public on the Nasdaq Stock Market in 1995. Nuance focused on commercializing advanced speech recognition technologies. Nuance was an early spinoff of SRI's Speech Technology and Research (STAR) Laboratory, a world leader in audio processing, speech and speaker analytics and spoken language research. The technology that served as the foundation of Nuance's speech recognition solution started at the STAR Lab and helped launch Nuance more than 20 years ago. In 1995, The SRI Language Modeling Toolkit (SRILM) was developed. This provides the tools to build and apply statistical language models (LMs), primarily for use in speech recognition, statistical tagging and segmentation, and machine translation. In terms of commercialization of natural automated speech recognition, SRI's natural language speech recognition software was the first to be deployed by a major corporation. In 1996, Charles Schwab & Co., Inc., used Nuance's speech recognition technology to allow customers to receive stock quotes over the telephone. One of the key features of the ‘Schwab Discount Brokerage system’, was the ability to recognize English words even when spoken by customers with accents. In 1997, Nuance Communications developed the first large scale commercial dialog system for United Parcel Services (UPS). UPS used the voice recognition platform to handle very large numbers of inquiries about package status. The company that would later merge with Nuance Communications started life as Visioneer, incorporated in 1992. In 1999, Visioneer acquired ScanSoft, Inc. (SSFT), and the combined company became known as ScanSoft. In September 2005, ScanSoft Inc. acquired and merged with Nuance Communications (NUAN), a natural language DOD-project spinoff from SRI International. The resulting company adopted the Nuance name. During the prior decade, the two companies competed in the commercial large-scale speech application business. === Data breach === Between 2014 and 2017, Nuance exposed over 45,000 patient records. == Solutions == Customer service virtual assistants Speech recognition — for people Speech recognition — for business Speech recognition — for physicians Accessibility Power PDF Managed Print Services Transcription === ScanSoft origins === In 1974, Raymond Kurzweil founded Kurzweil Computer Products, Inc. to develop the first omni-font optical character-recognition system – a computer program capable of recognizing text written in any normal font. In 1980, Kurzweil sold his company to Xerox. The company became known as Xerox Imaging Systems (XIS), and later ScanSoft. In March 1992, a new company called Visioneer, Inc. was founded to develop scanner hardware and software products, such as a sheetfed scanner called PaperMax and the document management software PaperPort. Visioneer eventually sold its hardware division to Primax Electronics, Ltd. in January 1999. Two months later, in March, Visioneer acquired ScanSoft from Xerox to form a new public company with ScanSoft as the new company-wide name. Prior to 2001, ScanSoft focused primarily on desktop imaging software such as TextBridge, PaperPort and OmniPage. Beginning with the December 2001 acquisition of Lernout & Hauspie assets, the company moved into the speech recognition business and began to compete with Nuance. Lernout & Hauspie had acquired speech recognition company Dragon Systems in June 2001, shortly before becoming bankrupt in October. Scansoft acquired speech recognition company SpeechWorks in 2003. === Partnership with Siri and Apple Inc. === In 2013, Nuance confirmed that its natural language processing algorithms supported Apple's Siri voice assistant. === Focus on health care === In 2019, Nuance spun off its automotive division as the company Cerence, allowing it to focus on health care applications. === Acquisition by Microsoft === On April 12, 2021, Microsoft announced that it would buy Nuance Communications for $19.7 billion, or $56 a share, a 22% increase over the previous closing price. Nuance's CEO, Mark Benjamin, stayed with the company. This was Microsoft's second-biggest acquisition up to that point, after its purchase of LinkedIn for $24 billion (~$30.7 billion in 2024) in 2016. Shortly after the deal, the Competition and Markets Authority, a UK regulatory body, stated it was looking into the deal on the basis of antitrust concerns. In December 2021, it was reported that the deal would be approved by the European Union. The acquisition was completed on March 4, 2022. In May 2023, Nuance announced an unspecified number of layoffs.
Read more →
Inpainting

Inpainting is a conservation process where damaged, deteriorated, or missing parts of an artwork are filled in to present a complete image. This process is commonly used in image restoration. It can be applied to both physical and digital art mediums such as oil or acrylic paintings, chemical photographic prints, sculptures, or digital images and video. With its roots in physical artwork, such as painting and sculpture, traditional inpainting is performed by a trained art conservator who has carefully studied the artwork to determine the mediums and techniques used in the piece, potential risks of treatments, and ethical appropriateness of treatment. == History == The modern use of inpainting can be traced back to Pietro Edwards (1744–1821), Director of the Restoration of the Public Pictures in Venice, Italy. Using a scientific approach, Edwards focused his restoration efforts on the intentions of the artist. It was during the 1930 International Conference for the Study of Scientific Methods for the Examination and Preservation of Works of Art, that the modern approach to inpainting was established. Helmut Ruhemann (1891–1973), a German restorer and conservator, led the discussions on the use of inpainting in conservation. Helmut Ruhemann was a leading figure in modernizing restoration and conservation. His greatest contribution to the field of conservation "was his insistence on following the methods of the original painter exactly, and on understanding the painter's artistic intention". After his career of over 40 years as a conservator, Ruhemann published his treatise The Cleaning of Paintings: Problems & Potentialities in 1968. In describing his method, Ruhemann states that "The surface [of the fill] should be slightly lower than that of the surrounding paint to allow for the thickness of the inpainting...Inpainting medium should look and behave like the original medium, but must not darken with age." Cesare Brandi (1906–1988) developed the teoria del restauro, the inpainting approach combining aesthetics and psychology. However, this approach was used primarily by Italian restorers and conservators, with the terminology becoming widespread in the 1990s. Technological advancements led to new applications of inpainting. Widespread use of digital techniques range from entirely automatic computerized inpainting to tools used to simulate the process manually. Since the mid-1990s, the process of inpainting has evolved to include digital media. More commonly known as image or video interpolation, a form of estimation, digital inpainting includes the use of computer software that relies on sophisticated algorithms to replace lost or corrupted parts of the image data. == Ethics == In order to preserve the integrity of an original artwork, any inpainting technique or treatment applied to physical or digital work should be reversible or distinguishable from the original content of the artwork. Prior to any treatments, conservators proceed according to the American Institute of Conservation of Historical and Artistic Works. There are several ethic considerations before Inpainting can be justified. Various deliberation decisions over the ethical appropriateness of the amount and type of inpainting done, resides on many factors. As most conservation treatments, inpainting's ethical questions rest mainly with authenticity, reversibility and documentation.Any intervention to compensate for loss should be documented in treatment records and reports and should be detectable by common examination methods. Such compensation should be reversible and should not falsely modify the known aesthetic, conceptual, and physical characteristics of the cultural property, especially by removing or obscuring original material.New technologies and the aesthetic demand for perfect images without imperfections challenge conservators' ethical practices to protect the integrity of originals. == Methods == Inpainting methods and techniques depend on the desired goal and type of image being treated. Treatments to fill in the gaps are different between physical and digital art. In inpainting, detailed records of the initial state of the images can help with the treatment and replicate the original closer. === Physical inpainting === Inpainting is rooted in the conservation and restoration of paintings. Inpainting can aim to make a visual improvement to the artwork as a whole by repairing missing or damaged parts using methods and materials equivalent to the original artist's work. ==== Application techniques ==== By studying the painting methods of various artists and the composition of paints used historically, conservators are able to restore works very closely to their original visual appearance. The picture as a whole determines how to fill in the gap. Helmut Ruhemann's inpainting techniques by Jessell have procedures to "preserve" the quality of oil and tempera paintings. === Digital inpainting === Many programs are able to reconstruct missing or damaged areas of digital photographs and videos. Most widely known for use with digital images is Adobe Photoshop. Given the various abilities of the digital camera and the digitization of old photos, inpainting has become an automatic process that can be performed on digital images. The inpainting techniques can be applied to object removal, text removal, and other automatic modifications of images and videos. In video special effects, inpainting is usually performed after video matting. They can also be observed in applications like image compression and super-resolution. In photography and cinema, it is used for film restoration to reverse, repair, or mitigate deterioration (e.g., physical damage such as cracks in photographs, scratches and dust spots in film, or chemical damage resulting in image loss; performed infrared cleaning). It can also be used for removing red-eye, the stamped date from photographs, and objects for creative effect. This technique can be used to replace any lost blocks in the coding and transmission of images, for example, in a streaming video. It can also be used to remove logos or watermarks in videos. Deep learning neural network-based inpainting can be used for decensoring images. Deep image prior-based techniques can be used for digital image inpainting, where a trained deep learning model is either unavailable or infeasible. Deep models for visual content generation, like text-to-image or text-to-video, learn complex priors over the distribution of visual content, and can be used to inpaint missing parts. For example, videos can be separated into layers, using a technique called omnimatte, which either pretrain an omnimatte model or without any training using an omnimatte-zero model. Three main groups of 2D image-inpainting algorithms can be found in the literature. The first one to be noted is structural (or geometric) inpainting, the second one is texture inpainting, the last one is a combination of these two techniques. They use the information of the known or non-destroyed image areas in order to fill the gap, similar to how physical images are restored. ==== Structural ==== Structural or geometric inpainting is used for smooth images that have strong, defined borders. There are many different approaches to geometric inpainting, but they all come from the idea that geometry can be recovered from similar areas or domains. Bertalmio proposed a method of structural inpainting that mimics how conservators address painting restoration. Bertalmio proposed that by progressively transferring similar information from the borders of an inpainting domain inwards, the gap can be filled. ==== Textural ==== While structural/geometric inpainting works to repair smooth images, textural inpainting works best with images that are heavily textured. Texture has a repetitive pattern which means that a missing portion cannot be restored by continuing the level lines into the gap; level lines provide a complete, stable representation of an image. To repair texture in an image, one can combine frequency and spatial domain information to fill in a selected area with a desired texture. This method, while the most simple and very effective, works well when selecting a texture to be in-painted. For a texture that covers a wider area or a larger frame one would have to go through the image segmenting the areas to be in-painted and selecting the corresponding textures from throughout the image; there are programs that can help find the corresponding areas that work in a similar way as 'find and replace' works in a word processor. ==== Combined structural and textural ==== Combined structural and textural inpainting approaches simultaneously try to perform texture- and structure-filling in regions of missing image information. Most parts of an image consist of texture and structure and the boundaries between image regions contain a large amount of structural information. This is the result when blending differ
Read more →
Artifact (app)

Artifact was a personalized social news aggregator app that uses recommender systems to suggest articles. Launched in January 2023 by Nokto, Inc., a company founded by co-founders of Instagram Kevin Systrom and Mike Krieger, the app is available for iOS and Android. The app's name is a portmanteau of the words "articles", "artificial intelligence", and "fact". The app shut down in January 2024 as a result of low interest. == History == Nokto, Inc. was established on March 3, 2022, as a foreign stock company in California, with its headquarters in San Francisco. The company's main product, Artifact, is the first new product launched by Krieger and Systrom since their 2018 resignation from Instagram after conflicts with parent company Meta, which acquired Instagram in 2012. Artifact launched on January 31, 2023, after the team had been working on it for over a year, offering the option to sign up for a waiting list for its private beta, which grew to about 160,000 people, and then launching in open beta on February 22, 2023. With a team of seven employees in San Francisco, the app was free throughout its lifetime, with the founders explaining at the time that different business models - such as advertising or subscription fees - could be explored in the future. In January 2024, cofounder Kevin Systrom announced that the app would be shutting down after concluding that "the market opportunity isn’t big enough to warrant continued investment in this way." In April 2024, it was announced Artifact had been acquired by Yahoo, who intended to use the service's technology in an upgraded Yahoo! News app. == Features == Frequently described as "TikTok for text" and a competitor to Twitter, Artifact was a news aggregator that used machine learning to make personalized recommendations based on topics, news sources, and authors that the reader is interested in. In addition to reading articles, the app offered the ability to like articles, leave comments, or listen to an audio version of an article read by AI-generated voices, including a simulation of the voices of Snoop Dogg or Gwyneth Paltrow. AI also would rewrite clickbait headlines that users flagged. Artifact later expanded to a social network where users could post links, images and text to their profile, which could be liked or commented on by other users. Similar to other social news websites like Reddit, reader accounts had profiles with reputation scores.
Read more →
Control engineering

Control engineering, also known as control systems engineering and, in some European countries, automation engineering, is an engineering discipline that deals with control systems, applying control theory to design equipment and systems with desired behaviors in control environments. The discipline of controls overlaps and is usually taught along with electrical engineering, chemical engineering and mechanical engineering at many institutions around the world. The practice uses sensors and detectors to measure the output performance of the process being controlled; these measurements are used to provide corrective feedback helping to achieve the desired performance. Systems designed to perform without requiring human input are called automatic control systems (such as cruise control for regulating the speed of a car). Multi-disciplinary in nature, control systems engineering activities focus on implementation of control systems mainly derived by mathematical modeling of a diverse range of systems. == Overview == Modern day control engineering is a relatively new field of study that gained significant attention during the 20th century with the advancement of technology. It can be broadly defined or classified as practical application of control theory. Control engineering plays an essential role in a wide range of control systems, from simple household washing machines to high-performance fighter aircraft. It seeks to understand physical systems, using mathematical modelling, in terms of inputs, outputs and various components with different behaviors; to use control system design tools to develop controllers for those systems; and to implement controllers in physical systems employing available technology. A system can be mechanical, electrical, fluid, chemical, financial or biological, and its mathematical modelling, analysis and controller design uses control theory in one or many of the time, frequency and complex-s domains, depending on the nature of the design problem. Control engineering is the engineering discipline that focuses on the modeling of a diverse range of dynamic systems (e.g. mechanical systems) and the design of controllers that will cause these systems to behave in the desired manner. Although such controllers need not be electrical, many are and hence control engineering is often viewed as a subfield of electrical engineering. Electrical circuits, digital signal processors and microcontrollers can all be used to implement control systems. Control engineering has a wide range of applications from the flight and propulsion systems of commercial airliners to the cruise control present in many modern automobiles. In most cases, control engineers utilize feedback when designing control systems. This is often accomplished using a proportional–integral–derivative controller (PID controller) system. For example, in an automobile with cruise control the vehicle's speed is continuously monitored and fed back to the system, which adjusts the motor's torque accordingly. Where there is regular feedback, control theory can be used to determine how the system responds to such feedback. In practically all such systems stability is important and control theory can help ensure stability is achieved. Although feedback is an important aspect of control engineering, control engineers may also work on the control of systems without feedback. This is known as open loop control. A classic example of open loop control is a washing machine that runs through a pre-determined cycle without the use of sensors. == History == Automatic control systems were first developed over two thousand years ago. The first feedback control device on record is thought to be the ancient Ktesibios's water clock in Alexandria, Egypt, around the third century BCE. It kept time by regulating the water level in a vessel and, therefore, the water flow from that vessel. This certainly was a successful device as water clocks of similar design were still being made in Baghdad when the Mongols captured the city in 1258 CE. A variety of automatic devices have been used over the centuries to accomplish useful tasks or simply just to entertain. The latter includes the automata, popular in Europe in the 17th and 18th centuries, featuring dancing figures that would repeat the same task over and over again; these automata are examples of open-loop control. Milestones among feedback, or "closed-loop" automatic control devices, include the temperature regulator of a furnace attributed to Drebbel, circa 1620, and the centrifugal flyball governor used for regulating the speed of steam engines by James Watt in 1788. In his 1868 paper "On Governors", James Clerk Maxwell was able to explain instabilities exhibited by the flyball governor using differential equations to describe the control system. This demonstrated the importance and usefulness of mathematical models and methods in understanding complex phenomena, and it signaled the beginning of mathematical control and systems theory. Elements of control theory had appeared earlier but not as dramatically and convincingly as in Maxwell's analysis. Control theory made significant strides over the next century. New mathematical techniques, as well as advances in electronic and computer technologies, made it possible to control significantly more complex dynamical systems than the original flyball governor could stabilize. New mathematical techniques included developments in optimal control in the 1950s and 1960s followed by progress in stochastic, robust, adaptive, nonlinear control methods in the 1970s and 1980s. Applications of control methodology have helped to make possible space travel and communication satellites, safer and more efficient aircraft, cleaner automobile engines, and cleaner and more efficient chemical processes. Before it emerged as a unique discipline, control engineering was practiced as a part of mechanical engineering and control theory was studied as a part of electrical engineering since electrical circuits can often be easily described using control theory techniques. In the first control relationships, a current output was represented by a voltage control input. However, not having adequate technology to implement electrical control systems, designers were left with the option of less efficient and slow responding mechanical systems. A very effective mechanical controller that is still widely used in some hydro plants is the governor. Later on, previous to modern power electronics, process control systems for industrial applications were devised by mechanical engineers using pneumatic and hydraulic control devices, many of which are still in use today. === Mathematical modelling === David Quinn Mayne, (1930–2024) was among the early developers of a rigorous mathematical method for analysing Model predictive control algorithms (MPC). It is currently used in tens of thousands of applications and is a core part of the advanced control technology by hundreds of process control producers. MPC's major strength is its capacity to deal with nonlinearities and hard constraints in a simple and intuitive fashion. His work underpins a class of algorithms that are probably correct, heuristically explainable, and yield control system designs which meet practically important objectives. == Control systems == == Control theory == == Education == At many universities around the world, control engineering courses are taught primarily in electrical engineering and mechanical engineering, but some courses can be instructed in mechatronics engineering, and aerospace engineering. In others, control engineering is connected to computer science, as most control techniques today are implemented through computers, often as embedded systems (as in the automotive field). The field of control within chemical engineering is often known as process control. It deals primarily with the control of variables in a chemical process in a plant. It is taught as part of the undergraduate curriculum of any chemical engineering program and employs many of the same principles in control engineering. Other engineering disciplines also overlap with control engineering as it can be applied to any system for which a suitable model can be derived. However, specialised control engineering departments do exist, for example, in Italy there are several master in Automation & Robotics that are fully specialised in Control engineering or the Department of Automatic Control and Systems Engineering at the University of Sheffield or the Department of Robotics and Control Engineering at the United States Naval Academy and the Department of Control and Automation Engineering at the Istanbul Technical University. Control engineering has diversified applications that include science, finance management, and even human behavior. Students of control engineering may start with a linear control system course dealing with the time and complex-s domain, which req
Read more →
Inception score

The Inception Score (IS) is an algorithm used to assess the quality of images created by a generative image model such as a generative adversarial network (GAN). The score is calculated based on the output of a separate, pretrained Inception v3 image classification model applied to a sample of (typically around 30,000) images generated by the generative model. The Inception Score is maximized when the following conditions are true: The entropy of the distribution of labels predicted by the Inceptionv3 model for the generated images is minimized. In other words, the classification model confidently predicts a single label for each image. Intuitively, this corresponds to the desideratum of generated images being "sharp" or "distinct". The predictions of the classification model are evenly distributed across all possible labels. This corresponds to the desideratum that the output of the generative model is "diverse". It has been somewhat superseded by the related Fréchet inception distance. While the Inception Score only evaluates the distribution of generated images, the FID compares the distribution of generated images with the distribution of a set of real images ("ground truth"). == Definition == Let there be two spaces, the space of images Ω X {\displaystyle \Omega _{X}} and the space of labels Ω Y {\displaystyle \Omega _{Y}} . The space of labels is finite. Let p g e n {\displaystyle p_{gen}} be a probability distribution over Ω X {\displaystyle \Omega _{X}} that we wish to judge. Let a discriminator be a function of type p d i s : Ω X → M ( Ω Y ) {\displaystyle p_{dis}:\Omega _{X}\to M(\Omega _{Y})} where M ( Ω Y ) {\displaystyle M(\Omega _{Y})} is the set of all probability distributions on Ω Y {\displaystyle \Omega _{Y}} . For any image x {\displaystyle x} , and any label y {\displaystyle y} , let p d i s ( y | x ) {\displaystyle p_{dis}(y|x)} be the probability that image x {\displaystyle x} has label y {\displaystyle y} , according to the discriminator. It is usually implemented as an Inception-v3 network trained on ImageNet. The Inception Score of p g e n {\displaystyle p_{gen}} relative to p d i s {\displaystyle p_{dis}} is I S ( p g e n , p d i s ) := exp ⁡ ( E x ∼ p g e n [ D K L ( p d i s ( ⋅ | x ) ‖ ∫ p d i s ( ⋅ | x ) p g e n ( x ) d x ) ] ) {\displaystyle IS(p_{gen},p_{dis}):=\exp \left(\mathbb {E} _{x\sim p_{gen}}\left[D_{KL}\left(p_{dis}(\cdot |x)\|\int p_{dis}(\cdot |x)p_{gen}(x)dx\right)\right]\right)} Equivalent rewrites include ln ⁡ I S ( p g e n , p d i s ) := E x ∼ p g e n [ D K L ( p d i s ( ⋅ | x ) ‖ E x ∼ p g e n [ p d i s ( ⋅ | x ) ] ) ] {\displaystyle \ln IS(p_{gen},p_{dis}):=\mathbb {E} _{x\sim p_{gen}}\left[D_{KL}\left(p_{dis}(\cdot |x)\|\mathbb {E} _{x\sim p_{gen}}[p_{dis}(\cdot |x)]\right)\right]} ln ⁡ I S ( p g e n , p d i s ) := H [ E x ∼ p g e n [ p d i s ( ⋅ | x ) ] ] − E x ∼ p g e n [ H [ p d i s ( ⋅ | x ) ] ] {\displaystyle \ln IS(p_{gen},p_{dis}):=H[\mathbb {E} _{x\sim p_{gen}}[p_{dis}(\cdot |x)]]-\mathbb {E} _{x\sim p_{gen}}[H[p_{dis}(\cdot |x)]]} ln ⁡ I S {\displaystyle \ln IS} is nonnegative by Jensen's inequality. Pseudocode:INPUT discriminator p d i s {\displaystyle p_{dis}} . INPUT generator g {\displaystyle g} . Sample images x i {\displaystyle x_{i}} from generator. Compute p d i s ( ⋅ | x i ) {\displaystyle p_{dis}(\cdot |x_{i})} , the probability distribution over labels conditional on image x i {\displaystyle x_{i}} . Sum up the results to obtain p ^ {\displaystyle {\hat {p}}} , an empirical estimate of ∫ p d i s ( ⋅ | x ) p g e n ( x ) d x {\displaystyle \int p_{dis}(\cdot |x)p_{gen}(x)dx} . Sample more images x i {\displaystyle x_{i}} from generator, and for each, compute D K L ( p d i s ( ⋅ | x i ) ‖ p ^ ) {\displaystyle D_{KL}\left(p_{dis}(\cdot |x_{i})\|{\hat {p}}\right)} . Average the results, and take its exponential. RETURN the result. === Interpretation === A higher inception score is interpreted as "better", as it means that p g e n {\displaystyle p_{gen}} is a "sharp and distinct" collection of pictures. ln ⁡ I S ( p g e n , p d i s ) ∈ [ 0 , ln ⁡ N ] {\displaystyle \ln IS(p_{gen},p_{dis})\in [0,\ln N]} , where N {\displaystyle N} is the total number of possible labels. ln ⁡ I S ( p g e n , p d i s ) = 0 {\displaystyle \ln IS(p_{gen},p_{dis})=0} iff for almost all x ∼ p g e n {\displaystyle x\sim p_{gen}} p d i s ( ⋅ | x ) = ∫ p d i s ( ⋅ | x ) p g e n ( x ) d x {\displaystyle p_{dis}(\cdot |x)=\int p_{dis}(\cdot |x)p_{gen}(x)dx} That means p g e n {\displaystyle p_{gen}} is completely "indistinct". That is, for any image x {\displaystyle x} sampled from p g e n {\displaystyle p_{gen}} , discriminator returns exactly the same label predictions p d i s ( ⋅ | x ) {\displaystyle p_{dis}(\cdot |x)} . The highest inception score N {\displaystyle N} is achieved if and only if the two conditions are both true: For almost all x ∼ p g e n {\displaystyle x\sim p_{gen}} , the distribution p d i s ( y | x ) {\displaystyle p_{dis}(y|x)} is concentrated on one label. That is, H y [ p d i s ( y | x ) ] = 0 {\displaystyle H_{y}[p_{dis}(y|x)]=0} . That is, every image sampled from p g e n {\displaystyle p_{gen}} is exactly classified by the discriminator. For every label y {\displaystyle y} , the proportion of generated images labelled as y {\displaystyle y} is exactly E x ∼ p g e n [ p d i s ( y | x ) ] = 1 N {\displaystyle \mathbb {E} _{x\sim p_{gen}}[p_{dis}(y|x)]={\frac {1}{N}}} . That is, the generated images are equally distributed over all labels.
Read more →
RIPAC (microprocessor)

RIPAC was a VLSI single-chip microprocessor designed for automatic recognition of the connected speech, one of the first of this use. The project of the microprocessor RIPAC started in 1984. RIPAC was aimed to provide efficient real-time speech recognition services to the italian telephone system provided by SIP. The microprocessor was presented in September 1986 at The Hague (Netherlands) at EUSPICO conference. It was composed of 70.000 transistors and structured as Harvard architecture. The name RIPAC is the acronym for "Riconoscimento del PArlato Connesso", that means "Recognition of the connected speech" in Italian. The microprocessor was designed by the Italian companies CSELT and ELSAG and was produced by SGS: a combination of Hidden Markov Model and Dynamic Time Warping algorithms was used for processing speech signals. It was able to do real-time speech recognition of Italian and many languages with a good affordability. The chip, issued by U.S. Patent No. 4,907,278, worked at first run.
Read more →
BevQ

BevQ is a queue management mobile application developed by Faircode Technologies of Kochi, Kerala. It is provided by the Kerala State Beverages Corporation under Government of Kerala. == History == This app was released together by the Government of Kerala and the Kerala State Beverages Corporation in order to implement social distancing in the liquor stores Kerala in the case of the COVID-19 pandemic in Kerala and to reduce the congestion of people. The BevQ App was released by Faircode Technologies on 27 May 2020 on the Google Play Store. In January 2021, the app was withdrawn as bars had opened. In June 2021, there was a commitment from the Kerala CM that the App will be relaunched again. It has been reported that over 132,000 new users downloaded the app in the 48 hours after the announcement. == Achievements == The BEVQ app, which works only in the state of Kerala, beat all other Indian food and drink apps in 2020 to see the highest growth in year-on-year sessions, according to the State of Mobile 2021 report by App Annie. The app even beat the likes of Domino’s, which is used all across India. Around 300 government Liquor shops and 900 private liquor shops were enlisted in the platform. More than 200 million unique users registered in the platform. About 250,000 tokens were given out a day.
Read more →