AI Chatbot Emochi

AI Chatbot Emochi — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

RFPolicy

The RFPolicy outlines a method for contacting vendors about security vulnerabilities found in their products. It was initially written in 2000 by hacker and security consultant Rain Forest Puppy. It was perhaps the second disclosure policy, following Simple Nomad's. The policy gives the vendor five working days to respond to the reporter of the bug. If the vendor fails to contact the reporter within those five days, the issue is recommended to be disclosed to the general community. The reporter should help the vendor reproduce the bug and work out a fix. The reporter should delay notifying the general community about the bug if the vendor provides feasible reasons for requiring so. If the vendor fails to respond or shuts down communication with the reporter of the problem within five working days, the reporter should disclose the issue to the general community. When issuing an alert or fix, the vendor should give the reporter proper credit for reporting the bug. Context for the history of vulnerability disclosure is available in a history article.
Read more →
Visible (mobile app)

Visible is a health tracking mobile app for people with long COVID and myalgic encephalomyelitis/chronic fatigue syndrome (ME/CFS). The company was founded by a Harry Leeming, an engineer from London living with long Covid since 2020, and Luke Martin-Fuller. In November 2022, Visible released an open beta of an app that aims to help people pace their activities to avoid post-exertional malaise. The app gathers data on exertion levels, symptom severity, and heart-rate variability. HRV is approximated using a smartphone's camera via a technique called photoplethysmography, and according to the app's developers, can indicate how much someone needs rest. The app is currently free, but is expected to be freemium in the future. Users can also opt to allow their data be used for research purposes. In July 2023, Visible and Imperial College London announced the start of the first two studies. One is on the effects of the menstrual cycle on long COVID symptoms, and the other is on the condition's epidemiology and economic impact. Visible has announced plans to couple the app with activity trackers for continuous monitoring of heart-rate and actimetry data, which the developers claim will be more effective. As of 2022, no clinical trials on Visible's effectiveness have been conducted.
Read more →
TalkBack

TalkBack is an accessibility service for the Android operating system that helps blind and visually impaired users to interact with their devices. It uses spoken words, vibration and other audible feedback to allow the user to know what is happening on the screen allowing the user to better interact with their device. The service is pre-installed on many Android devices, and it became part of the Android Accessibility Suite in 2017. According to the Google Play Store, the Android Accessibility Suite has been downloaded over five billion times, including devices that have the suite preinstalled. == Open-source == Google releases the source code of TalkBack with some releases of the accessibility service to GitHub, with the latest of these changes being from May 6, 2021. The source for these versions of Google TalkBack have been released under the Apache License version 2.0. == Release history ==
Read more →
Blanking (video)

In analog video, blanking occurs between horizontal lines and between frames. In raster scan equipment, an image is built up by scanning an electron beam from left to right across a screen to produce a visible trace of one scan line, reducing the brightness of the beam to zero (horizontal blanking), moving it back as fast as possible to the left of the screen at a slightly lower position (the next scan line), restoring the brightness, and continuing until all the lines have been displayed and the beam is at the bottom right of the screen. Its intensity is then reduced to zero again (vertical blanking), and it is rapidly moved to the top left to start again, creating the next frame. In television, in particular, the vertical blanking interval is long to accommodate the slow equipment available at the time the standard was set. Fast modern electronics allows digital information to be encoded into the signal during the vertical blanking interval; it is not displayed on screen as the beam is blanked, but can be processed by appropriate circuitry.
Read more →
Subpixel rendering

Subpixel rendering is a method used to increase the effective resolution of a color display device. It utilizes the composition of each pixel, which consists of three subpixels of which are red, green, and blue that can each be individually addressable on the display matrix. Subpixel rendering is primarily used for text rendering on standard DPI displays. Despite the inherent color anomalies, it can also be used to render general graphics. == History == The origin of subpixel rendering as used today remains controversial. Apple Inc., IBM, and Microsoft patented various implementations that differed in technical details owing to the different purposes for which their technologies were intended. Microsoft held several patents in the United States for subpixel rendering technology used in text rendering on RGB Stripe layouts. The patents 6,219,025; 6,239,783; 6,307,566; 6,225,973; 6,243,070; 6,393,145; 6,421,054; 6,282,327; and 6,624,828 were filed between October 7, 1998, and October 7, 1999, and expired on July 30, 2019. Analysis of the patent by FreeType indicates that the patent does not cover the idea of subpixel rendering, but rather the actual filter used as a last step to balance the color. Microsoft's patent describes the smallest possible filter that distributes each subpixel value equally among the R, G, and B pixels. Any other filter will either be blurrier or will introduce color artifacts. Apple was able to use it in Mac OS X due to a patent cross-licensing agreement. == Characteristics == A single pixel on a color display is made of several subpixels, typically three arranged left-to-right as red, green, and blue (RGB). The components are readily visible with a small magnifying glass, such as a loupe. These pixel components appear as a single color to the human eye because of blurring by optics and spatial integration by nerve cells in the eye. However, the eye is much more sensitive to the location. Therefore, turning on the G and B of one pixel and the R of the next pixel to the right will produce a white dot, but it will appear to be 1/3 of a pixel to the right of the white dot that would be seen from the RGB of only the first pixel. Subpixel rendering leverages this to provide three times the horizontal resolution of the rendered image. However, it has to blur this image to produce the correct color by ensuring the same amount of red, green, and blue are turned on as when no subpixel rendering is being done. Subpixel rendering does not necessitate the use of antialiasing. It gives a smoother result regardless of whether antialiasing is used or not since it artificially increases the resolution. However, it introduces color aliasing since subpixels are colored. Subsequent filtering applied to remove the color artifacts is a form of antialiasing, although its purpose is not smoothing jagged shapes as in conventional antialiasing. Subpixel rendering requires the software to know the layout of the subpixels. The most common reason it is wrong is monitors that can be rotated 90 (or 180) degrees, though monitors are manufactured with other arrangements of the subpixels, such as BGR or in triangles, or with 4 colors like RGBW squares. On any such display the result of incorrect subpixel rendering will be worse than if no subpixel rendering was done at all (it will not produce color artifacts, but it will produce noisy edges). == Implementations == === Apple II === Steve Gibson has claimed that the Apple II, introduced in 1977, supports an early form of subpixel rendering in its high-resolution (280×192) graphics mode. The Wozniak patent only used 2 "sub-pixels". The bytes that comprise the Apple II high-resolution screen buffer contain seven visible bits (each corresponding directly to a pixel) and a flag bit used to select between purple/green or blue/orange color sets. Each pixel, since it is represented by a single bit, is either on or off; there are no bits within the pixel itself for specifying color or brightness. Color is instead created as an artifact of the NTSC color encoding scheme, determined by horizontal position: pixels with even horizontal coordinates are always purple (or blue, if the flag bit is set), and odd pixels are always green (or orange). Two lit pixels next to each other are always white, regardless of whether the pair is even/odd or odd/even, and irrespective of the value of the flag bit. This is an approximation, but it is what most programmers of the time would have in mind while working with the Apple's high-resolution mode. Gibson's example claims that because two adjacent bits form a white block, there are, in fact, two bits per pixel: one that activates the pixel's purple left half and the other that activates its green right half. If the programmer instead activates the green right half of a pixel and the purple left half of the next pixel, the result is a white block 1/2 pixel to the right, which is indeed an instance of subpixel rendering. However, it is not clear whether any programmers of the Apple II have considered the pairs of bits as pixels—instead calling each bit a pixel. The flag bit in each byte affects color by shifting pixels half a pixel-width to the right. This half-pixel shift was exploited by some graphics software, such as HRCG (High-Resolution Character Generator), an Apple utility that displayed text using the high-resolution graphics mode, to smooth diagonals. === ClearType === Microsoft announced its subpixel rendering technology, called ClearType, at COMDEX in 1998. Microsoft published a paper in May 2000, Displaced Filtering for Patterned Displays, describing the filtering behind ClearType. It was then made available in Windows XP. Still, it was not activated by default until Windows Vista, while Windows XP OEMs could and did change the default setting. === FreeType === FreeType, the library used by most current software on the X Window System, contains two open source implementations. The original implementation uses the ClearType antialiasing filters and carries the following notice: "The colour filtering algorithm of Microsoft's ClearType technology for subpixel rendering is covered by patents; for this reason, the corresponding code in FreeType is disabled by default. Note that subpixel rendering per se is prior art; using a different colour filter thus easily circumvents Microsoft's patent claims." FreeType offers a variety of color filters. Since version 2.6.2, the default filter is light, a filter that is both normalized (value sums up to 1) and color-balanced (eliminate color fringes at the cost of resolution). Since version 2.8.1, a second implementation exists, called Harmony, that "offers high quality LCD-optimized output without resorting to ClearType techniques of resolution tripling and filtering". This is the method enabled by default. When using this method, "each color channel is generated separately after shifting the glyph outline, capitalizing on the fact that the color grids on LCD panels are shifted by a third of a pixel. This output is indistinguishable from ClearType with a light 3-tap filter." Since the Harmony method does not require additional filtering, it is not covered by the ClearType patents. === CoolType === Adobe created their own subpixel renderer called CoolType, allowing them to display documents the same way across various operating systems: Windows, MacOS, Linux etc. When it was launched around the year 2001, CoolType supported a wider range of fonts than Microsoft's ClearType, which at the time was limited to TrueType fonts. In contrast, Adobe's CoolType also supported PostScript fonts (and their OpenType equivalents). === macOS === Mac OS X (later OS X, now macOS) also used subpixel rendering, as part of Quartz 2D. However, it was removed after the introduction of Retina displays. Unlike Microsoft's implementation, which favors a tight fit to the grid (font hinting) to maximize legibility, Apple's implementation prioritizes the shape of the glyphs as set out by their designer.
Read more →
Frame grabber

A frame grabber is an electronic device that captures (i.e., "grabs") individual, digital still frames from an analog video signal or a digital video stream. It is usually employed as a component of a computer vision system, in which video frames are captured in digital form and then displayed, stored, transmitted, analyzed, or combinations of these. Historically, frame grabber expansion cards were the predominant way to interface cameras to PCs. Other interface methods have emerged since then, with frame grabbers (and in some cases, cameras with built-in frame grabbers) connecting to computers via interfaces such as USB, Ethernet and IEEE 1394 ("FireWire"). Early frame grabbers typically had only enough memory to store a single digitized video frame, whereas many modern frame grabbers can store multiple frames. Modern frame grabbers often are able to perform functions beyond capturing a single video input. For example, some devices capture audio in addition to video, and some devices provide, and concurrently capture frames from multiple video inputs. Other operations may be performed as well, such as deinterlacing, text or graphics overlay, image transformations (e.g., resizing, rotation, mirroring), and conversion to JPEG or other compressed image formats. To satisfy the technological demands of applications such as radar acquisition, manufacturing and remote guidance, some frame grabbers can capture images at high frame rates, high resolutions, or both. == Circuitry == Analog frame grabbers, which accept and process analog video signals, include these circuits: Input signal conditioner that buffers the analog video input signal to protect downstream circuitry Video decoder that converts SD analog video (e.g., NTSC, SECAM, PAL) or HD analog video (e.g., AHD, HD-TVI, HD-CVI) to a digital format Digital frame grabbers, which accept and process digital video streams, include these circuits: Digital video decoder that interfaces to and converts a specific type of digital video source, such as Camera Link, CoaXPress, DVI, GigE Vision, LVDS, or SDI Circuitry common to both analog and digital frame grabbers: Memory for storing the acquired image (i.e., a frame buffer) A bus interface through which a processor can control the acquisition and access the data General purpose I/O for triggering image acquisition or controlling external equipment == Applications == === Healthcare === Frame grabbers are used in medicine for many applications, including telenursing and remote guidance. In situations where an expert at another location needs to be consulted, frame grabbers capture the image or video from the appropriate medical equipment, so it can be sent digitally to the distant expert. === Manufacturing === "Pick and place" machines are often used to mount electronic components on circuit boards during the circuit board assembly process. Such machines use one or more cameras to monitor the robotics that places the components. Each camera is paired with a frame grabber that digitizes the analog video, thus converting the video to a form that can be processed by the machine software. === Network security === Frame grabbers may be used in security applications. For example, when a potential breach of security is detected, a frame grabber captures an image or a sequence of images, and then the images are transmitted across a digital network where they are recorded and viewed by security personnel. === Personal use === In recent years with the rise of personal video recorders like camcorders, mobile phones, etc. video and photo applications have gained ascending prominence. Frame grabbing is becoming very popular on these devices. === Astronomy & astrophotography === Amateur astronomers and astrophotographers use frame grabbers when using analog "low light" cameras for live image display and internet video broadcasting of celestial objects. Frame grabbers are essential to connect the analog cameras used in this application to the computers that store or process the images.
Read more →
Telebirr

Telebirr (Amharic: ቴሌብር) is a mobile payment service developed and was launched by Ethio telecom, the state owned telecommunication and Internet service provider in Ethiopia. It took five months to develop the end-to-end service. It facilitates the delivery of cashless transactions. The platform deployed currently has the capacity of processing up to 100 transactions per second (TPS) and can be scaled up to 1000 TPS. The service is accessible via SMS, USSD, and smartphone applications. Telebirr works in five languages. == Services == Though the service is fully accessible for any customer of Ethio telecom, the users need to register through the mobile application called Telebirr or using an authorized agent or Ethio telecom shop or Unstructured Supplementary Service Data (USSD), 127# nationally. However, Telebirr also provides a “quick registration” by using any information that already exists in Ethio telecom's system.
Read more →
Key frame

In animation and filmmaking, a key frame (or keyframe) is a drawing or shot that defines the starting and ending points of a smooth transition. These are called frames because their position in time is measured in frames on a strip of film or on a digital video editing timeline. A sequence of key frames defines which movement the viewer will see, whereas the position of the key frames on the film, video, or animation defines the timing of the movement. Because only two or three key frames over the span of a second do not create the illusion of movement, the remaining frames are filled with "inbetweens". == Use of key frames as a means to change parameters == In software packages that support animation, especially 3D graphics, there are many parameters that can be changed for any one object. One example of such an object is a light. In 3D graphics, lights function similarly to real-world lights. They cause illumination, cast shadows, and create specular highlights. Lights have many parameters, including light intensity, beam size, light color, and the texture cast by the light. Supposing that an animator wants the beam size to change smoothly from one value to another within a predefined period of time, that could be achieved by using key frames. At the start of the animation, a beam size value is set. Another value is set for the end of the animation. Thus, the software program automatically interpolates the two values, creating a smooth transition. == Video editing == In non-linear digital video editing, as well as in video compositing software, a key frame is a frame used to indicate the beginning or end of a change made to a parameter. For example, a key frame could be set to indicate the point at which audio will have faded up or down to a certain level. == Video compression == In video compression, a key frame, also known as an intra-frame, is a frame in which a complete image is stored in the data stream. In video compression, only changes that occur from one frame to the next are stored in the data stream, in order to greatly reduce the amount of information that must be stored. This technique capitalizes on the fact that most video sources (such as a typical movie) have only small changes in the image from one frame to the next. Whenever a drastic change to the image occurs, such as when switching from one camera shot to another or at a scene change, a key frame must be created. The entire image for the frame must be output when the visual difference between the two frames is so great that representing the new image incrementally from the previous frame would require more data than recreating the whole image. Because video compression only stores incremental changes between frames (except for key frames), it is not possible to fast-forward or rewind to any arbitrary spot in the video stream. That is because the data for a given frame only represents how that frame was different from the preceding one. For that reason, it is beneficial to include key frames at arbitrary intervals while encoding video. For example, a key frame may be output once for each 10 seconds of video, even though the video image does not change enough visually to warrant the automatic creation of the key frame. That would allow seeking within the video stream at a minimum of 10-second intervals. The downside is that the resulting video stream will be larger in disk size because many key frames are added when they are not necessary for the frame's visual representation. This drawback, however, does not produce significant compression loss when the bitrate is already set at a high value for better quality (as in the DVD MPEG-2 format).
Read more →
Empirical dynamic modeling

Empirical dynamic modeling (EDM) is a framework for analysis and prediction of nonlinear dynamical systems. Applications include population dynamics, ecosystem service, medicine, neuroscience, dynamical systems, geophysics, and human-computer interaction. EDM was originally developed by Robert May and George Sugihara. It can be considered a methodology for data modeling, predictive analytics, dynamical system analysis, machine learning and time series analysis. == Description == Mathematical models have tremendous power to describe observations of real-world systems. They are routinely used to test hypothesis, explain mechanisms and predict future outcomes. However, real-world systems are often nonlinear and multidimensional, in some instances rendering explicit equation-based modeling problematic. Empirical models, which infer patterns and associations from the data instead of using hypothesized equations, represent a natural and flexible framework for modeling complex dynamics. Donald DeAngelis and Simeon Yurek illustrated that canonical statistical models are ill-posed when applied to nonlinear dynamical systems. A hallmark of nonlinear dynamics is state-dependence: system states are related to previous states governing transition from one state to another. EDM operates in this space, the multidimensional state-space of system dynamics rather than on one-dimensional observational time series. EDM does not presume relationships among states, for example, a functional dependence, but projects future states from localised, neighboring states. EDM is thus a state-space, nearest-neighbors paradigm where system dynamics are inferred from states derived from observational time series. This provides a model-free representation of the system naturally encompassing nonlinear dynamics. A cornerstone of EDM is recognition that time series observed from a dynamical system can be transformed into higher-dimensional state-spaces by time-delay embedding with Takens's theorem. The state-space models are evaluated based on in-sample fidelity to observations, conventionally with Pearson correlation between predictions and observations. == Methods == Primary EDM algorithms include Simplex projection, Sequential locally weighted global linear maps (S-Map) projection, Multivariate embedding in Simplex or S-Map, Convergent cross mapping (CCM), and Multiview Embeding, described below. Nearest neighbors are found according to: NN ( y , X , k ) = ‖ X N i E − y ‖ ≤ ‖ X N j E − y ‖ if 1 ≤ i ≤ j ≤ k {\displaystyle {\text{NN}}(y,X,k)=\|X_{N_{i}}^{E}-y\|\leq \|X_{N_{j}}^{E}-y\|{\text{ if }}1\leq i\leq j\leq k} === Simplex === Simplex projection is a nearest neighbor projection. It locates the k {\displaystyle k} nearest neighbors to the location in the state-space from which a prediction is desired. To minimize the number of free parameters k {\displaystyle k} is typically set to E + 1 {\displaystyle E+1} defining an E + 1 {\displaystyle E+1} dimensional simplex in the state-space. The prediction is computed as the average of the weighted phase-space simplex projected T p {\displaystyle Tp} points ahead. Each neighbor is weighted proportional to their distance to the projection origin vector in the state-space. Find k {\displaystyle k} nearest neighbor: N k ← NN ( y , X , k ) {\displaystyle N_{k}\gets {\text{NN}}(y,X,k)} Define the distance scale: d ← ‖ X N 1 E − y ‖ {\displaystyle d\gets \|X_{N_{1}}^{E}-y\|} Compute weights: For{ i = 1 , … , k {\displaystyle i=1,\dots ,k} } : w i ← exp ⁡ ( − ‖ X N i E − y ‖ / d ) {\displaystyle w_{i}\gets \exp(-\|X_{N_{i}}^{E}-y\|/d)} Average of state-space simplex: y ^ ← ∑ i = 1 k ( w i X N i + T p ) / ∑ i = 1 k w i {\displaystyle {\hat {y}}\gets \sum _{i=1}^{k}\left(w_{i}X_{N_{i}+T_{p}}\right)/\sum _{i=1}^{k}w_{i}} === S-Map === S-Map extends the state-space prediction in Simplex from an average of the E + 1 {\displaystyle E+1} nearest neighbors to a linear regression fit to all neighbors, but localised with an exponential decay kernel. The exponential localisation function is F ( θ ) = exp ( − θ d / D ) {\displaystyle F(\theta )={\text{exp}}(-\theta d/D)} , where d {\displaystyle d} is the neighbor distance and D {\displaystyle D} the mean distance. In this way, depending on the value of θ {\displaystyle \theta } , neighbors close to the prediction origin point have a higher weight than those further from it, such that a local linear approximation to the nonlinear system is reasonable. This localisation ability allows one to identify an optimal local scale, in-effect quantifying the degree of state dependence, and hence nonlinearity of the system. Another feature of S-Map is that for a properly fit model, the regression coefficients between variables have been shown to approximate the gradient (directional derivative) of variables along the manifold. These Jacobians represent the time-varying interaction strengths between system variables. Find k {\displaystyle k} nearest neighbor: N ← NN ( y , X , k ) {\displaystyle N\gets {\text{NN}}(y,X,k)} Sum of distances: D ← 1 k ∑ i = 1 k ‖ X N i E − y ‖ {\displaystyle D\gets {\frac {1}{k}}\sum _{i=1}^{k}\|X_{N_{i}}^{E}-y\|} Compute weights: For{ i = 1 , … , k {\displaystyle i=1,\dots ,k} } : w i ← exp ⁡ ( − θ ‖ X N i E − y ‖ / D ) {\displaystyle w_{i}\gets \exp(-\theta \|X_{N_{i}}^{E}-y\|/D)} Reweighting matrix: W ← diag ( w i ) {\displaystyle W\gets {\text{diag}}(w_{i})} Design matrix: A ← [ 1 X N 1 X N 1 − 1 … X N 1 − E + 1 1 X N 2 X N 2 − 1 … X N 2 − E + 1 ⋮ ⋮ ⋮ ⋱ ⋮ 1 X N k X N k − 1 … X N k − E + 1 ] {\displaystyle A\gets {\begin{bmatrix}1&X_{N_{1}}&X_{N_{1}-1}&\dots &X_{N_{1}-E+1}\\1&X_{N_{2}}&X_{N_{2}-1}&\dots &X_{N_{2}-E+1}\\\vdots &\vdots &\vdots &\ddots &\vdots \\1&X_{N_{k}}&X_{N_{k}-1}&\dots &X_{N_{k}-E+1}\end{bmatrix}}} Weighted design matrix: A ← W A {\displaystyle A\gets WA} Response vector at T p {\displaystyle Tp} : b ← [ X N 1 + T p X N 2 + T p ⋮ X N k + T p ] {\displaystyle b\gets {\begin{bmatrix}X_{N_{1}+T_{p}}\\X_{N_{2}+T_{p}}\\\vdots \\X_{N_{k}+T_{p}}\end{bmatrix}}} Weighted response vector: b ← W b {\displaystyle b\gets Wb} Least squares solution (SVD): c ^ ← argmin c ‖ A c − b ‖ 2 2 {\displaystyle {\hat {c}}\gets {\text{argmin}}_{c}\|Ac-b\|_{2}^{2}} Local linear model c ^ {\displaystyle {\hat {c}}} is prediction: y ^ ← c ^ 0 + ∑ i = 1 E c ^ i y i {\displaystyle {\hat {y}}\gets {\hat {c}}_{0}+\sum _{i=1}^{E}{\hat {c}}_{i}y_{i}} === Multivariate Embedding === Multivariate Embedding recognizes that time-delay embeddings are not the only valid state-space construction. In Simplex and S-Map one can generate a state-space from observational vectors, or time-delay embeddings of a single observational time series, or both. === Convergent Cross Mapping === Convergent cross mapping (CCM) leverages a corollary to the Generalized Takens Theorem that it should be possible to cross predict or cross map between variables observed from the same system. Suppose that in some dynamical system involving variables X {\displaystyle X} and Y {\displaystyle Y} , X {\displaystyle X} causes Y {\displaystyle Y} . Since X {\displaystyle X} and Y {\displaystyle Y} belong to the same dynamical system, their reconstructions (via embeddings) M x {\displaystyle M_{x}} , and M y {\displaystyle M_{y}} , also map to the same system. The causal variable X {\displaystyle X} leaves a signature on the affected variable Y {\displaystyle Y} , and consequently, the reconstructed states based on Y {\displaystyle Y} can be used to cross predict values of X {\displaystyle X} . CCM leverages this property to infer causality by predicting X {\displaystyle X} using the M y {\displaystyle M_{y}} library of points (or vice versa for the other direction of causality), while assessing improvements in cross map predictability as larger and larger random samplings of M y {\displaystyle M_{y}} are used. If the prediction skill of X {\displaystyle X} increases and saturates as the entire M y {\displaystyle M_{y}} is used, this provides evidence that X {\displaystyle X} is casually influencing Y {\displaystyle Y} . === Multiview Embedding === Multiview Embedding is a Dimensionality reduction technique where a large number of state-space time series vectors are combitorially assessed towards maximal model predictability. == Extensions == Extensions to EDM techniques include: Generalized Theorems for Nonlinear State Space Reconstruction Extended Convergent Cross Mapping Dynamic stability S-Map regularization Visual analytics with EDM Convergent Cross Sorting Expert system with EDM hybrid Sliding windows based on the extended convergent cross-mapping Empirical Mode Modeling Accounting for missing data and variable step sizes Accounting for observation noise Hierarchical Bayesian EDM via Gaussian processes Intelligent and Adaptive Control Optimal control via Empirical dynamic programming Multiview distance regularised S-map
Read more →
Adrozek

Adrozek is malware that injects fake ads into online search results. Microsoft announced the malware threat on 10 December 2020, and noted that many different browsers are affected, including Google Chrome, Microsoft Edge, Mozilla Firefox and Yandex Browser. The malware was first detected in May 2020 and, at its peak in August 2020, controlled over 30,000 devices a day. But during the December 2020 announcement, Microsoft claimed "hundreds of thousands" of infected devices worldwide between May and September 2020. According to Microsoft, if not detected and blocked, Adrozek adds browser extensions, modifies a specific DLL per target browser, and changes browser settings to insert additional, unauthorized ads into web pages, often on top of legitimate ads from search engines. For each user tricked into clicking on the fake ads, the scammers earn affiliate advertising dollars. The malware has been observed to extract device data and, in some cases, steal credentials, sending them to remote servers. Users may unintentionally install the malware because of a drive-by download, by visiting a tampered website, opening an e-mail attachment, or clicking on a deceptive link or a deceptive pop-up window. The main malware program is downloaded to the “Programs Files” folder using file names such as Audiolava.exe, QuickAudio.exe, and converter.exe. According to PC Magazine, a good way to avoid, or mitigate, infection by Adrozek is to keep browser and related software programs up to date.
Read more →
Color clock

The color clock, or color timer, is a part of the video circuitry of computer graphics hardware that works with analog color television systems. The clock is timed to match the timing of the color standard it works with, typically NTSC or PAL, ensuring that the data being read from the computer memory to create the image on-screen is in sync with the display. Depending on the speed of the color clock, the product of the resolution and number of colors is defined. Slow color clocks of many early games consoles and home computers resulted in limited color palettes at the highest resolutions.
Read more →
Film recorder

A film recorder is a graphical output device for transferring images to photographic film from a digital source. In a typical film recorder, an image is passed from a host computer to a mechanism to expose film through a variety of methods, historically by direct photography of a high-resolution cathode-ray tube (CRT) display. The exposed film can then be developed using conventional developing techniques, and displayed with a slide or motion picture projector. The use of film recorders predates the current use of digital projectors, which eliminate the time and cost involved in the intermediate step of transferring computer images to film stock, instead directly displaying the image signal from a computer. Motion picture film scanners are the opposite of film recorders, copying content from film stock to a computer system. Film recorders can be thought of as modern versions of kinescopes. == Design == === Operation === All film recorders typically work in the same manner. The image is fed from a host computer as a raster stream over a digital interface. A film recorder exposes film through various mechanisms; flying spot (early recorders); photographing a high resolution video monitor; electron beam recorder (Sony HDVS); a CRT scanning dot (Celco); focused beam of light from a light valve technology (LVT) recorder; a scanning laser beam (Arrilaser); or recently, full-frame LCD array chips. For color image recording on a CRT film recorder, the red, green, and blue channels are sequentially displayed on a single gray scale CRT, and exposed to the same piece of film as a multiple exposure through a filter of the appropriate color. This approach yields better resolution and color quality than possible with a tri-phosphor color CRT. The three filters are usually mounted on a motor-driven wheel. The filter wheel, as well as the camera's shutter, aperture, and film motion mechanism are usually controlled by the recorder's electronics and/or the driving software. CRT film recorders are further divided into analog and digital types. The analog film recorder uses the native video signal from the computer, while the digital type uses a separate display board in the computer to produce a digital signal for a display in the recorder. Digital CRT recorders provide a higher resolution at a higher cost compared to analog recorders due to the additional specialized hardware. Typical resolutions for digital recorders were quoted as 2K and 4K, referring to 2048×1366 and 4096×2732 pixels, respectively, while analog recorders provided a resolution of 640×428 pixels in comparison. Higher-quality LVT film recorders use a focused beam of light to write the image directly onto a film loaded spinning drum, one pixel at a time. In one example, the light valve was a liquid-crystal shutter, the light beam was steered with a lens, and text was printed using a pre-cut optical mask. The LVT will record pixel beyond grain. Some machines can burn 120-res or 120 lines per millimeter. The LVT is basically a reverse drum scanner. The exposed film is developed and printed by regular photographic chemical processing. === Formats === Film recorders are available for a variety of film types and formats. The 35 mm negative film and transparencies are popular because they can be processed by any photo shop. Single-image 4×5 film and 8×10 are often used for high-quality, large format printing. Some models have detachable film holders to handle multiple formats with the same camera or with Polaroid backs to provide on-site review of output before exposing film. == Uses == Film recorders are used in digital printing to generate master negatives for offset and other bulk printing processes. For preview, archiving, and small-volume reproduction, film recorders have been rendered obsolete by modern printers that produce photographic-quality hardcopies directly on plain paper. They are also used to produce the master copies of movies that use computer animation or other special effects based on digital image processing. However, most cinemas nowadays use Digital Cinema Packages on hard drives instead of film stock. === Computer graphics === Film recorders were among the earliest computer graphics output devices; for example, the IBM 740 CRT Recorder was announced in 1954. Film recorders were also commonly used to produce slides for slide projectors; but this need is now largely met by video projectors that project images directly from a computer to a screen. The terms "slide" and "slide deck" are still commonly used in presentation programs. === Current uses === Currently, film recorders are primarily used in the motion picture film-out process for the ever increasing amount of digital intermediate work being done. Although significant advances in large venue video projection alleviates the need to output to film, there remains a deadlock between the motion picture studios and theater owners over who should pay for the cost of these very costly projection systems. This, combined with the increase in international and independent film production, will keep the demand for film recording steady for at least a decade. == Key manufacturers == Traditional film recorder manufacturers have all but vanished from the scene or have evolved their product lines to cater to the motion picture industry. Dicomed was one such early provider of digital color film recorders. Polaroid, Management Graphics, Inc, MacDonald-Detwiler, Information International, Inc., and Agfa were other producers of film recorders. Arri is the only current major manufacturer of film recorders. Kodak Lightning I film recorder. One of the first laser recorders. Needed an engineering staff to set up. Kodak Lightning II film recorder used both gas and diode laser to record on to film. The last LVT machines produced by Kodak / Durst-Dice stopped production in 2002. There are no LVT film recorders currently being produced. LVT Saturn 1010 uses a LED exposure (RGB) to 8"x10" film at 1000-3000ppi. LUX Laser Cinema Recorder from Autologic/Information International in Thousand Oaks, California. Sales end in March 2000. Used on the 1997 film “Titanic”. Arri produces the Arrilaser line of laser-based motion picture film recorders. MGI produced the Solitaire line of CRT-based motion picture film recorders. Matrix, originally ImaPRO, a branch of Agfa Division, produced the QCR line of CRT-based motion picture film recorders. CCG, formerly Agfa film recorders, has been a steady manufacturer of film recorders based in Germany. In 2004 CCG introduced Definity, a motion picture film recorder utilizing LCD technology. In 2010 CCG introduced the first full LED LCD film recorder as a new step in film recording. Cinevator was made by Cinevation AS, in Drammen, Norway. The Cinevator was a real-time digital film recorder. It could record IN, IP and prints with and without sound Oxberry produced the Model 3100 film recorder camera system, with interchangeable pin-registered movements (shuttles) for 35 mm (full frame/Silent, 1.33:1) and 16 mm (regular 16, "2R"), and others have adapted the Oxberry movements for CinemaScope, 1.85:1, 1.75:1, 1.66:1, as well as Academy/Sound (1.37:1) in 35 mm and Super-16 in 16 mm ("1R"). For instance, the "Solitaire" and numerous others employed the Oxberry 3100 camera system. == History == Before video tape recorders or VTRs were invented, TV shows were either broadcast live or recorded to film for later showing, using the kinescope process. In 1967, CBS Laboratories introduced the Electronic Video Recording format, which used video and telecined-to-video film sources, which were then recorded with an electron-beam recorder at CBS' EVR mastering plant at the time to 35mm film stock in a rank of 4 strips on the film, which was then slit down to 4 8.75 mm (0.344 in) film copies, for playback in an EVR player. All types of CRT recorders were (and still are) used for film recording. Some early examples used for computer-output recording were the 1954 IBM 740 CRT Recorder, and the 1962 Stromberg-Carlson SC-4020, the latter using a Charactron CRT for text and vector graphic output to either 16 mm motion picture film, 16 mm microfilm, or hard-copy paper output. Later 1970 and 80s-era recording to B&W (and color, with 3 separate exposures for red, green, and blue)) 16 mm film was done with an EBR (Electron Beam Recorder), the most prominent examples made by 3M), for both video and COM (Computer Output Microfilm) applications. Image Transform in Universal City, California used specially modified 3M EBR film recorders that could perform color film-out recording on 16 mm by exposing three 16 mm frames in a row (one red, one green and one blue). The film was then printed to color 16 mm or 35 mm film. The video fed to the recorder could either be NTSC, PAL or SECAM. Later, Image Transform used specially modified VTRs to record 24 frame for their "Image Vision" system. The modified 1 inch type B videotape VTRs would record
Read more →
Globetrooper

Globetrooper is a free travel app known for assisting travelers in finding partners for group trips and world adventures. Globetrooper offers a free social travel platform that helps people find travel partners. == History == Globetrooper was developed and released in 2010 by a couple; Todd Sullivan and Lauren McLeod who are two travel-minded individuals that wanted to make it easier for travelers to plan a journey and see the world. With their backgrounds in business, software & design, and a love for travel, both left the corporate world and launched Globetrooper on Lauren’s birthday 28 March 2010. Globetrooper was first launched as an information portal with a view to making it more social, but after some months, the content quickly grew and changed to the ‘travel partner’ concept.
Read more →
Patch management

Patch management (or patch management policy or patch policy or patch management process) is concerned with the identification, acquisition, distribution, testing and installation of patches to systems. Proper patch management can be a net productivity boost for an organization. Patches can be used to defend against and eliminate potential vulnerabilities of a system, so that no threats may exploit them. Problems can arise during patch management, including buggy patches that either fail to fix their problem or introduce new issues. Patch management tools help orchestrate all of the procedures involved in patch management. == Description == Patch management is defined as a sub-practice of various disciplines including vulnerability management (part of security management), lifecycle management (with further possible sub-classification into application lifecycle management and release management), change management, and systems management. The practice is broadly concerned with the identification, acquisition, distribution, and installation of patches to systems. Some definitions of patch management are as a software-level practice, while others are as a systems-level process: software, drivers, and firmware. == Cost–benefit analysis == While reserving time for patching takes up enterprise resources, there are balancing factors which can make proper patch management into a net productivity boost for an organization. Up-to-date systems often perform more efficiently, less costly, with less errors, less security risks, and better user workflow. Additionally, compliance with changing local and federal regulations are more likely to be satisfied. Patching security vulnerabilities has been one among many competing priorities for organizations, leading to longer periods before patching for some organizations. Equifax was too slow to implement its 2015 patch management plan to be able to mitigate or prevent the 2017 Equifax data breach, leading to scrutiny from regulators. == Relation to security management == Patches can be used to defend against and eliminate potential vulnerabilities of a system, so that no threats may exploit them; therefore, patch management can be considered a sub-discipline of vulnerability management. Every patchable device in a system presents an attack surface that must be secured. === Time plan === Automatic updates are where the patch is applied automatically with little to know actions or planning required. This approach is recommended for many individuals and organizations. Some organizations also have to prioritize which patches to prioritize given limited resources. Patch Tuesday is the most common process when major companies like Microsoft and Adobe release patches on a known date so that companies can plan resources around implementing the patches more quickly. Linux is open-sourced and patches can be released at any time, leading some to rely on mailing lists or other ways to be alerted to updates. === Inventory === Taking an inventory of software and hardware, including versions can make it easier to correlate with bugs or patches as they become known. Taking stock of how much education and support others in an organization need to install their patches can also help for planning how to implement the patch or design systems to begin with. Streamlining the process by using tools that can communicate with each other can also help to reduce the time of exposure to known vulnerabilities. == Challenges == There are a multitude of problems that can arise during patch management. A common issue is buggy patches, which either fail to fix their problem or introduce new issues. Another issue is deployment synchronization, since various subsystems may receive instructions to update at different times. Similarly, the difficulty of patch management across many devices may grow at an uncontrollable rate depending on organizational size. One prominent demonstration of the challenges facing proper patch management was the buggy Falcon Sensor patch by CrowdStrike which caused one of the worst IT outages of all time. == Implementations == A patch management tool (alternatively patch manager, patch management system, patch management software, or centralized patch management) help orchestrate all of the procedures involved in patch management. Tools can be in-house (applied locally by local administrators), or external, as with managed service providers (applied externally by a provider). === Patch management software === Windows Update for Business, System Center Configuration Manager, and Windows Server Update Services offer control over patch deployment, with features enabling testing, scheduling updates, and setting custom configurations on Windows platforms. === Managed service providers === == Regulatory requirements (United States) == Timely patching of software vulnerabilities is a requirement under multiple regulatory frameworks in the United States. The Health Insurance Portability and Accountability Act (HIPAA) Security Rule requires covered entities to protect electronic protected health information by implementing security measures sufficient to reduce risks to a reasonable and appropriate level, which industry guidance has long interpreted to include timely patch management. A proposed new HIPAA Security Rule would make patch management requirements explicit, mandating that covered entities and business associates deploy security patches and updates within a defined risk-based timeline and maintain written procedures for prioritizing, testing, and applying patches to systems that store, process, or transmit ePHI. The 2025 proposal continues to receive industry pushback as of December 2025. HIPAA was last updated in 2013. The Payment Card Industry Data Security Standard (PCI DSS) requires organizations to protect system components from known vulnerabilities by installing applicable security patches within one month of release for critical patches. The Cybersecurity and Infrastructure Security Agency (CISA) maintains a Known Exploited Vulnerabilities (KEV) catalog that compels U.S. federal agencies to remediate listed vulnerabilities within specified timelines. Agencies are typically required to patch within 3 weeks, though some vulnerabilities must be fixed within 24 hours.
Read more →
Physical information security

Physical information security is the intersection or common ground between physical security and information security. It primarily concerns the protection of tangible information-related assets such as computer systems and storage media against physical, real-world threats such as unauthorized physical access, theft, fire and flood. It typically involves physical controls such as protective barriers and locks, uninterruptible power supplies, and shredders. Information security controls in the physical domain complement those in the logical domain (such as encryption), and procedural or administrative controls (such as information security awareness and compliance with policies and laws). == Background == Asset are inherently valuable and yet vulnerable to a wide variety of threats, both malicious (e.g. theft, arson) and accidental/natural (e.g. lost property, bush fire). If threats materialize and exploit those vulnerabilities causing incidents, there are likely to be adverse impacts on the organizations or individuals who legitimately own and utilize the assets, varying from trivial to devastating in effect. Security controls are intended to reduce the probability or frequency of occurrence and/or the severity of the impacts arising from incidents, thus protecting the value of the assets. Physical security involves the use of controls such as smoke detectors, fire alarms and extinguishers, along with related laws, regulations, policies and procedures concerning their use. Barriers such as fences, walls and doors are obvious physical security controls, designed to deter or prevent unauthorized physical access to a controlled area, such as a home or office. The moats and battlements of Mediaeval castles are classic examples of physical access controls, as are bank vaults and safes. Information security controls protect the value of information assets, particularly the information itself (i.e. the intangible information content, data, intellectual property, knowledge etc.) but also computer and telecommunications equipment, storage media (including papers and digital media), cables and other tangible information-related assets (such as computer power supplies). The corporate mantra "Our people are our greatest assets" is literally true in the sense that so-called knowledge workers qualify as extremely valuable, perhaps irreplaceable information assets. Health and safety measures and even medical practice could therefore also be classed as physical information security controls since they protect humans against injuries, diseases and death. This perspective exemplifies the ubiquity and value of information. Modern human society is heavily reliant on information, and information has importance and value at a deeper, more fundamental level. In principle, the subcellular biochemical mechanisms that maintain the accuracy of DNA replication could even be classed as vital information security controls, given that genes are 'the information of life'. Malicious actors who may benefit from physical access to information assets include computer crackers, corporate spies, and fraudsters. The value of information assets is self-evident in the case of, say, stolen laptops or servers that can be sold-on for cash, but the information content is often far more valuable, for example encryption keys or passwords (used to gain access to further systems and information), trade secrets and other intellectual property (inherently valuable or valuable because of the commercial advantages they confer), and credit card numbers (used to commit identity fraud and further theft). Furthermore, the loss, theft or damage of computer systems, plus power interruptions, mechanical/electronic failures and other physical incidents prevent them being used, typically causing disruption and consequential costs or losses. Unauthorized disclosure of confidential information, and even the coercive threat of such disclosure, can be damaging as we saw in the Sony Pictures Entertainment hack at the end of 2014 and in numerous privacy breach incidents. Even in the absence of evidence that disclosed personal information has actually been exploited, the very fact that it is no longer secured and under the control of its rightful owners is itself a potentially harmful privacy impact. Substantial fines, adverse publicity/reputational damage and other noncompliance penalties and impacts that flow from serious privacy breaches are best avoided, regardless of cause! == Examples of physical attacks to obtain information == There are several ways to obtain information through physical attacks or exploitations. A few examples are described below. === Dumpster diving === Dumpster diving is the practice of searching through trash in the hope of obtaining something valuable such as information carelessly discarded on paper, computer disks or other hardware. === Overt access === Sometimes attackers will simply go into a building and take the information they need. Frequently when using this strategy, an attacker will masquerade as someone who belongs in the situation. They may pose as a copy room employee, remove a document from someone's desk, copy the document, replace the original, and leave with the copied document. Individuals pretending to building maintenance may gain access to otherwise restricted spaces. They might walk right out of the building with a trash bag containing sensitive documents, carrying portable devices or storage media that were left out on desks, or perhaps just having memorized a password on a sticky note stuck to someone's computer screen or called out to a colleague across an open office. == Examples of Physical Information Security Controls == Shredding paper documents prior to their disposal can prevent unintended information leakage. Digital data can be encrypted or securely wiped. Offices may require visitors to present valid identification cards or valid access keys. Office workers may be required to obey "clear desk" policies, protecting documents and other storage media (including portable IT devices) by tidying them away out of sight (for example in locked drawers, filing cabinets, safes or a Bank vault). Workers may be required to memorize their passwords or use a password manager instead of writing passwords on paper. Computers are vulnerable to outages caused by power cuts, accidental disconnection, flat batteries, brown-outs, surges, spikes, electrical interference and electronic failures. Physical information security controls to address the associated risks include: fuses, no-break battery-backed power supplies, electrical generators, redundant power sources and cabling, "Do not remove" warning signs on plugs, surge protectors, power quality monitoring, spare batteries, professional design and installation of power circuits plus regular inspections/tests and preventive maintenance.
Read more →