AI Chatbot In Discord

AI Chatbot In Discord — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Smart object

  A smart object is an object that enhances the interaction with not only people but also with other smart objects. Also known as smart connected products or smart connected things (SCoT), they are products, assets and other things embedded with processors, sensors, software and connectivity that allow data to be exchanged between the product and its environment, manufacturer, operator/user, and other products and systems. Connectivity also enables some capabilities of the product to exist outside the physical device, in what is known as the product cloud. The data collected from these products can be then analysed to inform decision-making, enable operational efficiencies and continuously improve the performance of the product. It can not only refer to interaction with physical world objects but also to interaction with virtual (computing environment) objects. A smart physical object may be created either as an artifact or manufactured product or by embedding electronic tags such as RFID tags or sensors into non-smart physical objects. Smart virtual objects are created as software objects that are intrinsic when creating and operating a virtual or cyber world simulation or game. The concept of a smart object has several origins and uses, see History. There are also several overlapping terms, see also smart device, tangible object or tangible user interface and Thing as in the Internet of things. == History == In the early 1990s, Mark Weiser, from whom the term ubiquitous computing originated, referred to a vision "When almost every object either contains a computer or can have a tab attached to it, obtaining information will be trivial", Although Weiser did not specifically refer to an object as being smart, his early work did imply that smart physical objects are smart in the sense that they act as digital information sources. Hiroshi Ishii and Brygg Ullmer refer to tangible objects in terms of tangibles bits or tangible user interfaces that enable users to "grasp & manipulate" bits in the center of users' attention by coupling the bits with everyday physical objects and architectural surfaces. The smart object concept was introduced by Marcelo Kallman and Daniel Thalmann as an object that can describe its own possible interactions. The main focus here is to model interactions of smart virtual objects with virtual humans, agents, in virtual worlds. The opposite approach to smart objects is 'plain' objects that do not provide this information. The additional information provided by this concept enables far more general interaction schemes, and can greatly simplify the planner of an artificial intelligence agent. In contrast to smart virtual objects used in virtual worlds, Lev Manovich focuses on physical space filled with electronic and visual information. Here, "smart objects" are described as "objects connected to the Net; objects that can sense their users and display smart behaviour". More recently in the early 2010s, smart objects are being proposed as a key enabler for the vision of the Internet of things. The combination of the Internet and emerging technologies such as near field communications, real-time localization, and embedded sensors enables everyday objects to be transformed into smart objects that can understand and react to their environment. Such objects are building blocks for the Internet of things and enable novel computing applications. In 2018, one of the world's first smart houses was built in Klaukkala, Finland in the form of a five-floor apartment block, using the Kone Residential Flow solution created by KONE, allowing even a smartphone to act as a home key. == Characteristics == Although we can view interaction with physical smart object in the physical world as distinct from interaction with virtual smart objects in a virtual simulated world, these can be related. Poslad considers the progression of: how humans use models of smart objects situated in the physical world to enhance human to physical world interaction; versus how smart physical objects situated in the physical world can model human interaction in order to lessen the need for human to physical world interaction; versus how virtual smart objects by modelling both physical world objects and modelling humans as objects and their subsequent interactions can form a predominantly smart virtual object environment. === Smart physical objects === The concept smart for a smart physical object simply means that it is active, digital, networked, can operate to some extent autonomously, is reconfigurable and has local control of the resources it needs such as energy, data storage, etc. Note, a smart object does not necessarily need to be intelligent as in exhibiting a strong essence of artificial intelligence—although it can be designed to also be intelligent. Physical world smart objects can be described in terms of three properties: Awareness: is a smart object's ability to understand (that is, sense, interpret, and react to) events and human activities occurring in the physical world. Representation: refers to a smart object's application and programming model—in particular, programming abstractions. Interaction: denotes the object's ability to converse with the user in terms of input, output, control, and feedback. Based upon these properties, these have been classified into three types: Activity-Aware Smart Objects: Are objects that can record information about work activities and its own use. Policy-Aware Smart Objects: Are objects that are activity-aware Objects can interpret events and activities with respect to predefined organizational policies. Process-Aware Smart Objects: Processes play a fundamental role in industrial work management and operation. A process is a collection of related activities or tasks that are ordered according to their position in time and space. === Smart virtual objects === For the virtual object in a virtual world case, an object is called smart when it has the ability to describe its possible interactions. This focuses on constructing a virtual world using only virtual objects that contain their own interaction information. There are four basic elements to constructing such a smart virtual object framework. Object properties: physical properties and a text description Interaction information: position of handles, buttons, grips, and the like Object behavior: different behaviors based on state variables Agent behaviors: description of the behavior an agent should follow when using the object Some versions of smart objects also include animation information in the object information, but this is not considered to be an efficient approach, since this can make objects inappropriately oversized. === Categorization === The terms smart, connected product or smart product can be confusing as it is used to cover a broad range of different products, ranging from smart home appliances (e.g., smart bathroom scales or smart light bulbs) to smart cars (e.g., Tesla). While these products share certain similarities, they often differ substantially in their capabilities. Raff et al. developed a conceptual framework that distinguishes different smart products based on their capabilities, which features 4 types of smart product archetypes (in ascending order of "smartness"). Digital Connected Responsive Intelligent == Advantages == Smart, connected products have three primary components: Physical – made up of the product's mechanical and electrical parts. Smart – made up of sensors, microprocessors, data storage, controls, software, and an embedded operating system with enhanced user interface. Connectivity – made up of ports, antennae, and protocols enabling wired/wireless connections that serve two purposes, it allows data to be exchanged with the product and enables some functions of the product to exist outside the physical device. Each component expands the capabilities of one another resulting in "a virtuous cycle of value improvement". First, the smart components of a product amplify the value and capabilities of the physical components. Then, connectivity amplifies the value and capabilities of the smart components. These improvements include: Monitoring of the product's conditions, its external environment, and its operations and usage. Control of various product functions to better respond to changes in its environment, as well as to personalize the user experience. Optimization of the product's overall operations based on actual performance data, and reduction of downtimes through predictive maintenance and remote service. Autonomous product operation, including learning from their environment, adapting to users' preferences and self-diagnosing and service. === The Internet of things (IoT) === The Internet of things is the network of physical objects that contain embedded technology to communicate and sense or interact with their internal states or the external environment. The phrase "Internet of things" reflects the gro

  Read more →
• 

  Audio mining

  Audio mining is a technique by which the content of an audio signal can be automatically analyzed and searched. It is most commonly used in the field of automatic speech recognition, where the analysis tries to identify any speech within the audio. The term audio mining is sometimes used interchangeably with audio indexing, phonetic searching, phonetic indexing, speech indexing, audio analytics, speech analytics, word spotting, and information retrieval. Audio indexing, however, is mostly used to describe the pre-process of audio mining, in which the audio file is broken down into a searchable index of words. == History == Academic research on audio mining began in the late 1970s in schools like Carnegie Mellon University, Columbia University, the Georgia Institute of Technology, and the University of Texas. Audio data indexing and retrieval began to receive attention and demand in the early 1990s, when multimedia content started to develop and the volume of audio content significantly increased. Before audio mining became the mainstream method, written transcripts of audio content were created and manually analyzed. == Process == Audio mining is typically split into four components: audio indexing, speech processing and recognition systems, feature extraction and audio classification. The audio will typically be processed by a speech recognition system in order to identify word or phoneme units that are likely to occur in the spoken content. This information may either be used immediately in pre-defined searches for keywords or phrases (a real-time "word spotting" system), or the output of the speech recognizer may be stored in an index file. One or more audio mining index files can then be loaded at a later date in order to run searches for keywords or phrases. The results of a search will normally be in terms of hits, which are regions within files that are good matches for the chosen keywords. The user may then be able to listen to the audio corresponding to these hits in order to verify if a correct match was found. === Audio Indexing === In audio, there is the main problem of information retrieval - there is a need to locate the text documents that contain the search key. Unlike humans, a computer is not able to distinguish between the different types of audios such as speed, mood, noise, music or human speech - an effective searching method is needed. Hence, audio indexing allows efficient search for information by analyzing an entire file using speech recognition. An index of content is then produced, bearing words and their locations done through content-based audio retrieval, focusing on extracted audio features. It is done through mainly two methods: Large Vocabulary Continuous Speech Recognition (LVCSR) and Phonetic-based Indexing. ==== Large Vocabulary Continuous Speech Recognizers (LVCSR) ==== In text-based indexing or large vocabulary continuous speech recognition (LVCSR), the audio file is first broken down into recognizable phonemes. It is then run through a dictionary that can contain several hundred thousand entries and matched with words and phrases to produce a full text transcript. A user can then simply search a desired word term and the relevant portion of the audio content will be returned. If the text or word could not be found in the dictionary, the system will choose the next most similar entry it can find. The system uses a language understanding model to create a confidence level for its matches. If the confidence level be below 100 percent, the system will provide options of all the found matches. ===== Advantages and disadvantages ===== The main draw of LVCSR is its high accuracy and high searching speed. In LVCSR, statistical methods are used to predict the likelihood of different word sequences, hence the accuracy is much higher than the single word lookup of a phonetic search. If the word can be found, the probability of the word spoken is very high. Meanwhile, while initial processing of audio takes a fair bit of time, searching is quick as just a simple test to text matching is needed. On the other hand, LVCSR is susceptible to common issues of speech recognition. The inherent random nature of audio and problems of external noise all affect the accuracies of text-based indexing. Another problem with LVCSR is its over reliance on its dictionary database. LVCSR only recognizes words that are found in their dictionary databases, and these dictionaries and databases are unable to keep up with the constant evolving of new terminology, names and words. Should the dictionary not contain a word, there is no way for the system to identify or predict it. This reduces the accuracy and reliability of the system. This is named the Out-of-vocabulary (OOV) problem. Audio mining systems try to cope with OOV by continuously updating the dictionary and language model used, but the problem still remains significant and has probed a search for alternatives. Additionally, due to the need to constantly update and maintain task-based knowledge and large training databases to cope with the OOV problem, high computational costs are incurred. This makes LVCSR an expensive approach to audio mining. ==== Phonetic-based Indexing ==== Phonetic-based indexing also breaks the audio file into recognizable phonemes, but instead of converting them to a text index, they are kept as they are and analyzed to create a phonetic-based index. The process of phonetic-based indexing can be split into two phases. The first phase is indexing. It begins by converting the input media into a standard audio representation format (PCM). Then, an acoustic model is applied to the speech. This acoustic model represents characteristics of both an acoustic channel (an environment in which the speech was uttered and a transducer through which it was recorded) and a natural language (in which human beings expressed the input speech). This produces a corresponding phonetic search track, or phonetic audio track (PAT), a highly compressed representation of the phonetic content of the input media. The second phase is searching. The user's search query term is parsed into a possible phoneme string using a phonetic dictionary. Then, multiple PAT files can be scanned at high speed during a single search for likely phonetic sequences that closely match corresponding strings of phonemes in the query term. ===== Advantages and disadvantages ===== Phonetic indexing is most attractive as it is largely unaffected by linguistic issues such as unrecognized words and spelling errors. Phonetic preprocessing maintains an open vocabulary that does not require updating. That makes it particularly useful for searching specialized terminology or words in foreign languages that do not commonly appear in dictionaries. It is also more effective for searching audio files with disruptive background noise and/or unclear utterances as it can compile results based on the sounds it can discern, and should the user wish to, they can search through the options until they find the desired item. Furthermore, in contrast to LVCSR, it can process audio files very quickly as there are very few unique phonemes between languages. However, phonemes cannot be effectively indexed like an entire word, thus searching on a phonetic-based system is slow. An issue with phonetic indexing is its low accuracy. Phoneme-based searches result in more false matches than text-based indexing. This is especially prevalent for short search terms, which have a stronger likelihood of sounding similar to other words or being part of bigger words. It could also return irrelevant results from other languages. Unless the system recognizes exactly the entire word, or understands phonetic sequences of languages, it is difficult for phonetic-based indexing to return accurate findings. === Speech processing and recognition system === Deemed as the most critical and complex component of audio mining, speech recognition requires the knowledge of human speech production system and its modeling. To correspond the Human speech production system, the electrical speech production system is developed to consist of: Speech generation Speech perception Voiced & unvoiced speech Model of human speech The electrical speech production system converts acoustic signal into corresponding representation of the spoken through the acoustic models in their software where all phonemes are represented. A statistical language model aids in the process by identifying how likely words are to follow each other in certain languages. Put together with a complex probability analysis, the speech recognition system is capable of taking an unknown speech signal and transcribing it into words based on the program's dictionary. ASR (automatic speech recognition) system includes: Acoustic analysis: input sound waveform is transformed into a feature Acoustic model: establishes relationship between speech signal and phonemes, pronunciation model and lang

  Read more →
• 

  Mix automation

  In music recording, mix automation allows the mixing console to remember the mixing engineer's dynamic adjustment of faders during a musical piece in the post-production editing process. A timecode is necessary for the synchronization of automation. Modern mixing consoles and digital audio workstations use comprehensive mix automation. The need for automated mixing originated from the late 1970s transition form 8-track to 16-track and then 24-track multitrack recording, as mixing could be laborious and require multiple people and hands, and the results could be almost impossible to reproduce. With 48-track recording - synchronized twin 24-track recorders (for a net 46 audio tracks, with one on each machine for SMPTE timecode) - came larger recording and mixing consoles with even more channel faders to manage during mixdown. Manufacturers, such as Neve Electronics (now AMS Neve) and Solid State Logic (SSL), both English companies, developed systems that enabled one engineer to oversee every detail of a complex mix, although the computers required to power these desks remained a rarity into the late 1970s. According to record producer Roy Thomas Baker, Queen's 1975 single "Bohemian Rhapsody" was one of the first mixes to be done with automation. == Types == Voltage Controlled Automation fader levels are regulated by voltage-controlled amplifiers (VCA). VCAs control the audio level and not the actual fader. Moving Fader Automation a motor is attached to the fader, which then can be controlled by the console, digital audio workstation (DAW), or user. Software Controlled Automation the software can be internal to the console, or external as part of a DAW. The virtual fader can be adjusted in the software by the user. MIDI Automation the communications protocol MIDI can be used to send messages to the console to control automation. == Modes == Auto Write used the first time automation is created or when writing over existing automation Auto Touch writes automation data only while a fader is touched/faders return to any previously automated position after release Auto Latch starts writing automation data when a fader is touched/stays in position after release Auto Read digital Audio Workstation performs the written automation Auto Off automation is temporarily disabled All of these include the mute button. If mute is pressed during writing of automation, the audio track will be muted during playback of that automation. Depending on software, other parameters such as panning, sends, and plug-in controls can be automated as well. In some cases, automation can be written using a digital potentiometer instead of a fader.

  Read more →
• 

  Couch to 5K

  Couch to 5K, abbreviated C25K, is an exercise plan that gradually progresses from beginner running toward a 5 kilometre (3.1 mile) run over nine weeks. == Operations == The Couch to 5K running plan, also known as C25K, created by Josh Clark in 1996, was developed with the expectation of creating a plan for new runners to start running. The plan is aimed to have users work out for 20 to 30 minutes, three days a week. Within the program, users can be expected to perform different tasks such as intervals of running with period of short walks in between to help build endurance in the weeks up to the final goal of a 5K run. During the nine weeks leading up to the race, the runner will learn to set their own pace and where their strengths and weaknesses are within running. Often, the daily workouts start with a five-minute warm-up walk and works up to running five kilometres without a walking break within nine weeks. Users are not expected to have any experience in running and can be some of the first running that they ever do. The main goal is to turn that unexperienced runner into someone who can run a 5K. Clark started the website Kick and featured C25K on the site. In 2001, Kick merged with Cool Running, a New England–based running site. Clark later sold his stake in Cool Running and the Couch to 5K program. Cool Running was absorbed into Active.com, operated by Active Network, LLC. Active Network provides mobile apps for Couch to 5K, as well as 5K to 10K, a follow-up program. The NHS in the UK provides downloadable podcasts and a smartphone app (Android and iOS) for the plan. A mobile app, created by Zen Labs, has training plans that are based on the Couch to 5K running plan from CoolRunning.com. It is one of the highest-rated health and fitness apps available on Android and iOS. As of 2016, the C25K app has been used by over 5 million people.

  Read more →
• 

  Moving object detection

  Moving object detection is a technique used in computer vision and image processing. Multiple consecutive frames from a video are compared by various methods to determine if any moving object is detected. Moving objects detection has been used for wide range of applications like video surveillance, activity recognition, road condition monitoring, airport safety, monitoring of protection along marine border, etc. == Definition == Moving object detection is to recognize the physical movement of an object in a given place or region. By acting segmentation among moving objects and stationary area or region, the moving objects' motion can be tracked and thus analyzed later. To achieve this, consider a video is a structure built upon single frames, moving object detection is to find the foreground moving target(s), either in each video frame or only when the moving target shows the first appearance in the video. == Traditional methods == Among all the traditional moving object detection methods, we could categorize them into four major approaches: Background subtraction, Frame differencing, Temporal Differencing, and Optical Flow. === Frame differencing === Instead of using traditional approach, to use image subtraction operator by subtracting second and images afterwards, the frame differencing method makes comparisons between two successive frames to detect moving targets. === Temporal differencing === The temporal differencing method identifies the moving object by applying pixel-wise difference method with two or three consecutive frames.

  Read more →
• 

  Normalization (image processing)

  In image processing, normalization is a process that changes the range of pixel intensity values, a kind of intensity mapping. Applications include photographs with poor contrast due to glare, for example. A typical case is contrast stretching. In more general fields of data processing, such as digital signal processing, it is referred to as dynamic range expansion. The purpose of dynamic range expansion in the various applications is usually to bring the image, or other type of signal, into a range that is more familiar or normal to the senses, hence the term normalization. Often, the motivation is to achieve consistency in dynamic range for a set of data, signals, or images to avoid mental distraction or fatigue. For example, a newspaper will strive to make all of the images in an issue share a similar range of grayscale. Auto-normalization in image processing software typically normalizes to the full dynamic range of the number system specified in the image file format. == Definition == Normalization transforms an n-dimensional grayscale image I : { X ⊆ R n } → { Min , . . , Max } {\displaystyle I:\{\mathbb {X} \subseteq \mathbb {R} ^{n}\}\rightarrow \{{\text{Min}},..,{\text{Max}}\}} with intensity values in the range ( Min , Max ) {\displaystyle ({\text{Min}},{\text{Max}})} , into a new image I N : { X ⊆ R n } → { newMin , . . , newMax } {\displaystyle I_{N}:\{\mathbb {X} \subseteq \mathbb {R} ^{n}\}\rightarrow \{{\text{newMin}},..,{\text{newMax}}\}} with intensity values in the range ( newMin , newMax ) {\displaystyle ({\text{newMin}},{\text{newMax}})} . The linear normalization of a grayscale digital image is performed according to the formula I N = ( I − Min ) newMax − newMin Max − Min + newMin {\displaystyle I_{N}=(I-{\text{Min}}){\frac {{\text{newMax}}-{\text{newMin}}}{{\text{Max}}-{\text{Min}}}}+{\text{newMin}}} For example, if the intensity range of the image is 50 to 180 and the desired range is 0 to 255 the process entails subtracting 50 from each of pixel intensity, making the range 0 to 130. Then each pixel intensity is multiplied by 255/130, making the range 0 to 255. Normalization might also be non-linear, as the relationship between I {\displaystyle I} and I N {\displaystyle I_{N}} may not be linear. An example of non-linear normalization is when the normalization follows a sigmoid function, in which case the normalized image is computed according to the formula I N = ( newMax − newMin ) 1 1 + e − I − β α + newMin {\displaystyle I_{N}=({\text{newMax}}-{\text{newMin}}){\frac {1}{1+e^{-{\frac {I-\beta }{\alpha }}}}}+{\text{newMin}}} Where α {\displaystyle \alpha } defines the width of the input intensity range, and β {\displaystyle \beta } defines the intensity around which the range is centered. Gamma correction (log/inverse log) is also a common transformation function. === Colorspace === Intensity operations generally operate on a colorspace that maps to the human perception of lightness without intentionally changing the other properties. This can be done, for example, by operating on the L component of the CIELAB color space, or approximately by operating on the Y component of YCbCr. It is also possible to operate on each of the RGB color channels, though the result will not always make sense. == Contrast stretching == This is the most significant and essential technique of spatial-based image enhancement. The basic intent of this contrast enhancement technique is to adjust the local contrast in the image so as to bring out the clear regions or objects in the image. Low-contrast images often result from poor or non-uniform lighting conditions, a limited dynamic range of the imaging sensor, or improper settings of the lens aperture. This operation tries to change the intensity of the pixel in the image, particularly in the input image, to obtain an enhanced image. It is based on the number of techniques, namely local, global, dark and bright levels of contrast. The contrast enhancement is considered as the amount of color or gray differentiation that lies among the different features in an image. The contrast enhancement improves the quality of image by increasing the luminance difference between the foreground and background. A contrast stretching transformation can be achieved by: Stretching the dark range of input values into a wider range of output values: This involves increasing the brightness of the darker areas in the image to enhance details and improve visibility. Shifting the mid-range of input values: This involves adjusting the brightness levels of the mid-tones in the image to improve overall contrast and clarity. Compressing the bright range of input values: This process involves reducing the brightness of the brighter areas in the image to prevent overexposure resulting in a more balanced and visually appealing image. It can be described as the following piecewise funciton: I N = { s 1 r 1 I if I < r 1 s 2 − s 1 r 1 − r 2 ( I − r 1 ) if r 1 ≤ I ≤ r 2 1 − s 2 1 − r 2 ( I − r 2 ) if I > r 2 {\displaystyle I_{N}={\begin{cases}{\frac {s_{1}}{r_{1}}}I&{\text{if }}Ir_{2}\end{cases}}} Where: ( r 1 , s 1 ) {\displaystyle (r_{1},s_{1})} defines the transition point between the "dark" range to the "main" range. ( r 2 , s 2 ) {\displaystyle (r_{2},s_{2})} defines the transition point between the "main" range to the "bright" range. A typical linear stretch is obtained when ( r 1 , s 1 ) = ( r min , 0 ) {\displaystyle (r_{1},s_{1})=(r_{\text{min}},0)} and ( r 2 , s 2 ) = ( r max , 1 ) {\displaystyle (r_{2},s_{2})=(r_{\text{max}},1)} , where r min {\displaystyle r_{\text{min}}} and r max {\displaystyle r_{\text{max}}} denote the minimum and maximum levels in the source image. === Global contrast stretching === Global Contrast Stretching considers all color palate ranges at once to determine the maximum and minimum values for the entire RGB color image. This approach utilizes the combination of RGB colors to derive a single maximum and minimum value for contrast stretching across the entire image. === Local contrast stretching === Local contrast stretching (LCS) is an image enhancement method that focuses on locally adjusting each pixel's value to improve the visualization of structures within an image, particularly in both the darkest and lightest portions. It operates by utilizing sliding windows, known as kernels, which traverse the image. The central pixel within each kernel is adjusted using the following formula: I p ( x , y ) = 255 × [ I 0 ( x , y ) − m i n ] ( m a x − m i n ) {\displaystyle I_{p}(x,y)=255\times {\frac {[I_{0}(x,y)-min]}{(max-min)}}} Where: Ip(x,y) is the color level for the output pixel (x,y) after the contrast stretching process. I0(x,y) is the color level input for data pixel (x, y). max is the maximum value for color level in the input image within the selected kernel. min is the minimum value for color level in the input image within the selected kernel. A piecewise form (see above) may also be used. LCS can be applied to the three color channels of an image separately.

  Read more →
• 

  Continuous Function Chart

  A Continuous Function Chart (CFC) is a graphic editor that can be used in conjunction with the STEP 7 software package or with other tools, such as CODESYS. It is used to create the entire software structure of the CPU from ready-made blocks. When working with the editor, you place blocks on function charts, assign parameters to them, and interconnect them. Interconnecting means, for example, that values are transferred from one output to one or more inputs during communication between the blocks. Continuous function charts are basically used for controlling continuous processes, where all the logic is executed and outputs are calculated in each PLC scan. Whereas in SFC, execution will be sequential as done is batch processes.

  Read more →
• 

  Alias Eclipse

  Eclipse was a professional 2D image editing program available on Silicon Graphics and Windows workstations. Designed to manipulate high-resolution images like digitized movie frames and photographs for print, it offered color correction tools, image processing effects, rudimentary paint features, and spline-based drawing and masking. == History == Eclipse was originally developed in the late 1980s by Full Color Computing, an early provider of photo retouch and color prepress software for Silicon Graphics workstations. Alias Research (later Alias Systems Corporation), a developer of professional 3D graphics applications for the SGI platform, purchased the rights to Eclipse in fall 1990. Alias developed Eclipse through the early to mid-1990s, releasing version 2.5 in 1995 with improvements to the speed of color correction, effects, and rendering. Xyvision's Contex Prepress division purchased exclusive rights to Eclipse from Alias in 1996, and released version 3.0 the following year. Eclipse was subsequently sold to German developer Form & Vision GmbH, which continued development and ported it to the Windows platform. In 1999, Form & Vision released a demo of Eclipse 3.1.3 on the SGI platform which was limited to 1600 x 1600 pixel images, then ceased development of Eclipse on the SGI platform. Eclipse was thereafter developed exclusively for the Windows platform, culminating with version 3.1.4 in 2001. In the same year the firm went bankrupt. == Features == Eclipse was designed to work with very large images that could not be manipulated in real time on contemporary computer systems due to memory limitations, and thus allowed the user to make modifications to a lower-resolution copy of the original image in "proxy mode." Brush strokes, color corrections, and other edits were saved in proxy mode, then applied to the full-size image in post processing. This method also allowed for batch processing of a high-resolution image sequence using the edits applied to the original proxy image. Other features included color correction and separation, warping, special effects, text, and shape masking. Wavelet image compression created by LuraTech was added to Eclipse 3.1.4

  Read more →
• 

  D/Vision Pro

  D/Vision Pro was one of the earliest marketed non-linear editing systems. It was released by TouchVision Systems, Inc. in the mid-1990s. The program was DOS-based and worked on either Intel's 386 or 486 processor. The system used AVI compression and worked with the Action Media II board. The system allowed users to digitize video, audio, and timecode, create an edit decision list (EDL), instantly play back the edited program, and output the finished EDL in a wide variety of formats. These cost-effective editing systems were used by numerous independent filmmakers and in low-budget productions during the mid-late 1990s. D/Vision Pro's low-quality compression led TouchVision (later renamed D/Vision Systems) to abandon it in favor of D/Vision Online, which was purchased by Discreet Logic and renamed edit. In June 2002, Discreet discontinued edit, as they did not want it to interfere with smoke sales which were more profitable. Discreet was later purchased by Autodesk.

  Read more →
• 

  Productivity software

  Productivity software (also called personal productivity software or office productivity software) is application software used for producing information (such as documents, presentations, worksheets, databases, charts, graphs, digital paintings, electronic music and digital video). Its names arose from it increasing productivity, especially of individual office workers, from typists to knowledge workers, although its scope is now wider than that. Office suites, which brought word processing, spreadsheet, and relational database programs to the desktop in the 1980s, are the core example of productivity software. They revolutionized the office with the magnitude of the productivity increase they brought as compared with the pre-1980s office environments of typewriters, paper filing, and handwritten lists and ledgers. In the United States, as of 2015, some 78% of "middle-skill" occupations (those that call for more than a high school diploma but less than a bachelor's degree) required the use of productivity software. == Details == Productivity software traditionally runs directly on a computer. For example, Plus/4 model of computer contains in ROM for applications of productivity software. Productivity software is one of the reasons people use personal computers. == Office suite == An office suite is a bundle of productivity software (a software suite) intended to be used by office workers. The components are generally distributed together, have a consistent user interface and usually can interact with each other, sometimes in ways that the operating system would not normally allow. The earliest office suite for personal computers was MicroPro International's StarBurst in the early 1980s, comprising the WordStar word processor, the CalcStar spreadsheet and the DataStar database software. Other suites arose in the 1980s, and Microsoft Office came to dominate the market in the 1990s, a position it retains as of 2024. During the 1990s, office suite products gained popularity by offering bundles of applications that, when bought as part of a suite, effectively discounted the individual applications, with four or five applications being bundled for the price of two applications bought separately. When faced with such potential savings, customers could be "tempted by the suite, rather than the value of a particular product", and by 1994 more than 60 percent of the sales of Microsoft Word and around 70 percent of the sales of Microsoft Excel were as part of sales of Microsoft Office. Such considerations had an impact on vendors of individual applications, often smaller companies, raising concerns that office suites were "stifling innovation", and even established vendors such as Borland and WordPerfect were having to adapt to the suite phenomenon, Borland ultimately deciding to sell its Quattro Pro spreadsheet to WordPerfect as the latter sought to assemble its own suite product. The dominant suite vendors, Microsoft and Lotus, downplayed competition and innovation concerns, claiming that users were still able to exercise choice and that "user-driven development" was guiding the evolution of office suites. Another view was that component-based software would eventually emerge, focusing development on more specialised components used by productivity software, empowering "a plethora of third-party developers", and that a "mix and match" approach of such components would adapt to the user's way of working. === Office suite components === The base components of office suites are: Word processor Spreadsheet Presentation program Other components include: Database software Graphics suite (raster graphics editor, vector graphics editor, image viewer) Desktop publishing software Formula editor Diagramming software Email client Communication software Personal information manager Notetaking Groupware Project management software Table (information) Web log analysis software

  Read more →
• 

  Non-local means

  Non-local means is an algorithm in image processing for image denoising. Unlike "local mean" filters, which take the mean value of a group of pixels surrounding a target pixel to smooth the image, non-local means filtering takes a mean of all pixels in the image, weighted by how similar these pixels are to the target pixel. This results in much greater post-filtering clarity, and less loss of detail in the image compared with local mean algorithms. If compared with other well-known denoising techniques, non-local means adds "method noise" (i.e. error in the denoising process) which looks more like white noise, which is desirable because it is typically less disturbing in the denoised product. Recently non-local means has been extended to other image processing applications such as deinterlacing, view interpolation, and depth maps regularization. == Definition == Suppose Ω {\displaystyle \Omega } is the area of an image, and p {\displaystyle p} and q {\displaystyle q} are two points within the image. Then, the algorithm is: u ( p ) = 1 C ( p ) ∫ Ω v ( q ) f ( p , q ) d q . {\displaystyle u(p)={1 \over C(p)}\int _{\Omega }v(q)f(p,q)\,\mathrm {d} q.} where u ( p ) {\displaystyle u(p)} is the filtered value of the image at point p {\displaystyle p} , v ( q ) {\displaystyle v(q)} is the unfiltered value of the image at point q {\displaystyle q} , f ( p , q ) {\displaystyle f(p,q)} is the weighting function, and the integral is evaluated ∀ q ∈ Ω {\displaystyle \forall q\in \Omega } . C ( p ) {\displaystyle C(p)} is a normalizing factor, given by C ( p ) = ∫ Ω f ( p , q ) d q . {\displaystyle C(p)=\int _{\Omega }f(p,q)\,\mathrm {d} q.} == Common weighting functions == The purpose of the weighting function, f ( p , q ) {\displaystyle f(p,q)} , is to determine how closely related the image at the point p {\displaystyle p} is to the image at the point q {\displaystyle q} . It can take many forms. === Gaussian === The Gaussian weighting function sets up a normal distribution with a mean, μ = B ( p ) {\displaystyle \mu =B(p)} and a variable standard deviation: f ( p , q ) = e − | B ( q ) − B ( p ) | 2 h 2 {\displaystyle f(p,q)=e^{-{{\left\vert B(q)-B(p)\right\vert ^{2}} \over h^{2}}}} where h {\displaystyle h} is the filtering parameter (i.e., standard deviation) and B ( p ) {\displaystyle B(p)} is the local mean value of the image point values surrounding p {\displaystyle p} . == Discrete algorithm == For an image, Ω {\displaystyle \Omega } , with discrete pixels, a discrete algorithm is required. u ( p ) = 1 C ( p ) ∑ q ∈ Ω v ( q ) f ( p , q ) {\displaystyle u(p)={1 \over C(p)}\sum _{q\in \Omega }v(q)f(p,q)} where, once again, v ( q ) {\displaystyle v(q)} is the unfiltered value of the image at point q {\displaystyle q} . C ( p ) {\displaystyle C(p)} is given by: C ( p ) = ∑ q ∈ Ω f ( p , q ) {\displaystyle C(p)=\sum _{q\in \Omega }f(p,q)} Then, for a Gaussian weighting function, f ( p , q ) = e − | B ( q ) 2 − B ( p ) 2 | h 2 {\displaystyle f(p,q)=e^{-{{\left\vert B(q)^{2}-B(p)^{2}\right\vert } \over h^{2}}}} where B ( p ) {\displaystyle B(p)} is given by: B ( p ) = 1 | R ( p ) | ∑ i ∈ R ( p ) v ( i ) {\displaystyle B(p)={1 \over |R(p)|}\sum _{i\in R(p)}v(i)} where R ( p ) ⊆ Ω {\displaystyle R(p)\subseteq \Omega } and is a square region of pixels surrounding p {\displaystyle p} and | R ( p ) | {\displaystyle |R(p)|} is the number of pixels in the region R {\displaystyle R} . == Efficient implementation == The computational complexity of the non-local means algorithm is quadratic in the number of pixels in the image, making it particularly expensive to apply directly. Several techniques were proposed to speed up execution. One simple variant consists of restricting the computation of the mean for each pixel to a search window centred on the pixel itself, instead of the whole image. Another approximation uses summed-area tables and fast Fourier transform to calculate the similarity window between two pixels, speeding up the algorithm by a factor of 50 while preserving comparable quality of the result.

  Read more →
• 

  Blackmagic Design

  Blackmagic Design Pty Ltd is an Australian company that develops digital cinema technology and manufactures professional video production hardware and software. Headquartered in South Melbourne, it is known for producing high-end digital movie cameras and a range of broadcast and post-production equipment. The company also develops software applications, including the DaVinci Resolve application for non-linear video editing, color correction, color grading, visual effects, and audio post-production. == History == Blackmagic Design Pty Ltd was founded on 7 September 2001 by Grant Petty. Its first product, DeckLink, introduced in 2002, was a video capture card for macOS that supported uncompressed 10-bit video, marking a shift toward professional-grade yet affordable video workflows. Subsequent versions—including the DeckLink 2, Pro SDI, HD Plus, and Multibridge—added capabilities such as color correction, Windows support, and compatibility with major editing software like Adobe Premiere Pro, to broaden the product's appeal. At the 2012 NAB Show, Blackmagic announced its first Cinema Camera, a digital movie camera. Blackmagic made several acquisitions over the next decade. In 2009, it acquired da Vinci Systems, known for its color-grading tools. In 2010, it acquired Echolab's ATEM switcher line, in 2014, it added eyeon Software (developer of the Blackmagic Fusion compositing software) and London's Cintel (film scanning and restoration), and in 2016, it acquired Fairlight, an audio technology company known for its CMI synthesizers as well as mixing consoles. == Products == List of all products developed by the company. Editing, Color Correction and Audio Post Production DaVinci Resolve (free version) and DaVinci Resolve Studio (paid version), computer software for non-linear video editing, color correction, color grading, visual effects, and audio post-production. Audio/Video Controller Consoles: Editor Keyboard, Speed Editor, DaVinci Resolve Replay Editor, Micro Panel, Mini Panel, DaVinci Resolve Micro Color Panel, Advanced Panel, Fairlight Console Channel Fader, Fairlight Console Channel Control, Fairlight Console LCD Monitor, Fairlight Console Audio Editor, Fairlight Desktop Audio Editor, Fairlight Desktop Console, Fairlight Audio Interface Cintel Film Scanner (Generations 1-3) Live Production Home Streaming: ATEM Mini, ATEM Mini Pro/ISO, ATEM Mini Extreme, ATEM Mini Extreme ISO (The ATEM Mini series has both HDMI and SDI variants) Production Switchers: ATEM 1,2 & 4 M/E Constellation HD, ATEM 1,2 & 4 M/E Constellation 4K, ATEM Constellation 8K, ATEM 1,2 & 4 M/E Production Studio 4K, ATEM Television Studio HD8 & HD8 ISO Switcher & Camera Controllers: ATEM Camera Control Panel, ATEM 1 M/E Advanced Panel, ATEM 2 M/E Advanced Panel, ATEM 4 M/E Advanced Panel Chroma Keyers: Ultimatte 12 HD Mini, Ultimatte 12 HD, Ultimatte 12 4K, Ultimatte 12 8K Recording and Storage: HyperDeck Studio HD Mini, HyperDeck Studio HD Plus, HyperDeck Studio HD Plus, HyperDeck Studio 4K Pro, HyperDeck Extreme 8K HDR, HyperDeck Extreme 4K HDR, HyperDeck Extreme Control, HyperDeck Shuttle HD, Duplicator 4K, MultiDock 10G, Video Assist 7" 12G HDR, Video Assist 5" 12G HDR Capture and Playback UltraStudio: 3G, HD Mini, 4K Mini, 4K Extreme 3 DeckLink (PCIe cards): Mini Recorder, Mini Monitor, Mini Monitor 4K, Mini Recorder 4K, Duo 2 Mini, Duo 2, Quad 2, SDI 4K, Studio 4K, 4K Extreme 12G, 8K Pro, Quad HDMI Recorder Network Storage Cloud Store Cloud Pod Broadcast Converters Micro Converter: BiDirectional SDI/HDMI 3G wPSU, HDMI to SDI 3G wPSU, SDI to HDMI 3G wPSU, BiDirectional SDI/HDMI 3G, HDMI to SDI 3G, SDI to HDMI 3G Mini Converters: Audio to SDI, Optical Fiber 12G, SDI Multiplex 4K, Quad SDI to HDMI 4K, SDI Distribution 4K, SDI to Analog 4K, Audio to SDI 4K, SDI to Audio 4K, HDMI to SDI 6G, SDI to HDMI 6G Teranex Mini: SDI Distribution 12G, SDI to HDMI 12G, Audio to SDI 12G, SDI to Analog 12G, SDI to HDMI 8K HDR, SDI to DisplayPort 8K HDR 2110 IP Converters Routing and Distribution Videohub

  Read more →
• 

  Auralization

  Auralization is a procedure designed to model and simulate the experience of acoustic phenomena rendered as a soundfield in a virtualized space. This is useful in configuring the soundscape of architectural structures, concert venues, and public spaces, as well as in making coherent sound environments within virtual immersion systems. == History == The English term auralization was used for the first time by Kleiner et al. in an article in the journal of the AES en 1991. The increase of computational power allowed the development of the first acoustic simulation software towards the end of the 1960s. == Principles == Auralizations are experienced through systems rendering virtual acoustic models made by convolving or mixing acoustic events recorded 'dry' (or in an anechoic chamber) projected within a virtual model of an acoustic space, the characteristics of which are determined by means of sampling its impulse response (IR). Once this h ( t ) {\displaystyle h(t)} has been determined, the simulation of the resulting soundfield s ( t ) {\displaystyle s(t)} in the target environment is obtained by convolution: r ( t ) = h ( t ) ∗ s ( t ) {\displaystyle r(t)=h(t)s(t)} The resulting sound r ( t ) {\displaystyle r(t)} is heard as it would if emitted in that acoustic space. == Binaurality == For auralizations to be perceived as realistic, it is critical to emulate the human hearing in terms of position and orientation of the listener's head with respect to the sources of sound. For IR data to be convolved convincingly, the acoustic events are captured using a dummy head where two microphones are positioned on each side of the head to record an emulation of sound arriving at the locations of human ears, or using an ambisonics microphone array and mixed down for binaurality. Head-related transfer functions (HRTF) datasets can be used to simplify the process insofar as a monaural IR can be measured or simulated, then audio content is convolved with its target acoustic space. In rendering the experience, the transfer function corresponding to the orientation of the head is applied to simulate the corresponding spatial emanation of sound.

  Read more →
• 

  YaDICs

  YaDICs is a program written to perform digital image correlation on 2D and 3D tomographic images. The program was designed to be both modular, by its plugin strategy and efficient, by it multithreading strategy. It incorporates different transformations (Global, Elastic, Local), optimizing strategy (Gauss-Newton, Steepest descent), Global and/or local shape functions (Rigid-body motions, homogeneous dilatations, flexural and Brazilian test models)... == Theoretical background == === Context === In solid mechanics, digital image correlation is a tool that allows to identify the displacement field to register a reference image (called herein fixed image) to images during an experiment (mobile image). For example, it is possible to observe the face of a specimen with a painted speckle on it in order to determine its displacement fields during a tensile test. Before the appearance of such methods, researchers usually used strain gauges to measure the mechanical state of the material but strain gauges only measure the strain on a point and don't allow to understand material with an heterogeneous behavior. One can obtain a full in plane strain tensor by derivation of the displacement fields. Many methods are based upon the optical flow. In fluid mechanics a similar method is used, called Particle Image Velocimetry (PIV); the algorithms are similar to those of DIC but it is impossible to ensure that the optical flow is conserved so a vast majority of the software used the normalized cross correlation metric. In mechanics the displacement or velocity fields are the only concern, registering images is just a side effect. There is another process called image registration using the same algorithms (on monomodal images) but where the goal is to register images and thereby identifying the displacement field is just a side effect. YaDICs uses the general principle of image registration with a particular attention to the displacement fields basis. === Image registration principle === YaDICs can be explained using the classical image registration framework: === Image registration general scheme === The common idea of image registration and digital image correlation is to find the transformation between a fixed image and a moving one for a given metric using an optimization scheme. While there are many methods to achieve such a goal, Yadics focuses on registering images with the same modality. The idea behind the creation of this software is to be able to process data that comes from a μ-tomograph; i.e.: data cube over 10003 voxels. With such a size it is not possible to use naive approach usually used in a two-dimensional context. In order to get sufficient performances OpenMP parallelism is used and data are not globally stored in memory. As an extensive description of the different algorithms is given in. === Sampling === Contrary to image registration, Digital Image Correlation targets the transformation, one wants to extracted the most accurate transformation from the two images and not just match the images. Yadics uses the whole image as a sampling grid: it is thus a total sampling. === Interpolator === It is possible to choose between bilinear interpolation and bicubic interpolation for the grey level evaluation at non integer coordinates. The bi-cubic interpolation is the recommended one. === Metrics === ==== Sum of squared differences (SSD) ==== The SSD is also known as mean squared error. The equation below defines the SSD metric: S S D ( μ , I F , I M ) = 1 | Ω F | ∑ x i ∈ Ω F ( I F ( x i ) − I M ( T μ ( x i ) ) ) 2 , {\displaystyle SSD(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})={\dfrac {1}{\left|\Omega _{F}\right|}}\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\mathcal {I_{M}}}({T}_{\mu }(x_{i}))\right)^{2},} where I F {\displaystyle {\mathcal {I_{F}}}} is the fixed image, I M {\displaystyle {\mathcal {I_{M}}}} the moving one, Ω F {\displaystyle \Omega _{F}} the integration area | Ω F | {\displaystyle \left|\Omega _{F}\right|} the number of pi(vo)xels (cardinal) and T μ {\displaystyle {T}_{\mu }} the transformation parametrized by μ The transformation can be written as: T μ ( x ) = x + { Φ ( x ) } t { μ } . {\displaystyle T_{\mu }(x)=x+\left\{\Phi (x)\right\}^{t}\left\{\mu \right\}.} This metric is the main one used in the YaDICs as it works well with same modality images. One has to find the minimum of this metric ==== Normalized cross-correlation ==== The normalized cross-correlation (NCC) is used when one cannot assure the optical flow conservation; it happens in case of change of lighting or if particles disappear from the scene can occur in particle images velocimetry (PIV). The NCC is defined by: N C C ( μ , I F , I M ) = ∑ x i ∈ Ω F ( I F ( x i ) − I F ¯ ) ( I M ( T μ ( x i ) ) − I M ¯ ) ∑ x i ∈ Ω F ( I F ( x i ) − I F ¯ ) 2 ∑ x i ∈ Ω F ( I M ( T μ ( x i ) ) − I M ¯ ) 2 , {\displaystyle NCC(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})={\dfrac {\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\overline {\mathcal {I_{F}}}}\right)\left({\mathcal {I_{M}}}({T}_{\mu }(x_{i}))-{\overline {\mathcal {I_{M}}}}\right)}{\sqrt {\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\overline {\mathcal {I_{F}}}}\right)^{2}\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{M}}}({T}_{\mu }(x_{i}))-{\overline {\mathcal {I_{M}}}}\right)^{2}}}},} where I F ¯ {\displaystyle {\overline {\mathcal {I_{F}}}}} and I M ¯ {\displaystyle {\overline {\mathcal {I_{M}}}}} are the mean values of the fixed and mobile images. This metric is only used to find local translation in Yadics. This metric with translation transform can be solved using cross-correlation methods, which are non iterative and can be accelerated using Fast Fourier Transform . === Classification of transformations === There are three categories of parametrization: elastic, global and local transformation. The elastic transformations respect the partition of unity, there are no holes created or surfaces counted several times. This is commonly used in Image Registration by the use of B-Spline functions and in solid mechanics with finite element basis. The global transformations are defined on the whole picture using rigid body or affine transformation (which is equivalent to homogeneous strain transformation). More complex transformations can be defined such as mechanically based one. These transformations have been used for stress intensity factor identification by and for rod strain by. The local transformation can be considered as the same global transformation defined on several Zone Of Interest (ZOI) of the fixed image. ==== Global ==== Several global transforms have been implemented: Rigid and homogeneous (Tx,Ty,Rz in 2D; Tx,Ty,Tz,Rx,Ry,Rz,Exx,Eyy,Ezz,Eyz,Exz,Exy in 3D) Brazilian (Only in 2D), Dynamic Flexion, ==== Elastic ==== First-order quadrangular finite elements Q4P1 are used in Yadics. ===== Local ===== Every global transform can be used on a local mesh. === Optimization === The YaDICs optimization process follows a gradient descent scheme. The first step is to compute the gradient of the metric regarding the transform parameters ∂ S S D ( μ , I F , I M ) ∂ μ = 2 | Ω F | ∑ x i ∈ Ω F ( I F ( x i ) − I M ( T μ ( x i ) ) ) ∂ I M ( T μ ( x i ) ∂ μ = 2 | Ω F | ∑ x i ∈ Ω F ( I F ( x i ) − I M ( T μ ( x i ) ) ) ( ∂ T μ ( x i ) ∂ μ ) t ∂ I M ( T μ ( x i ) ) ∂ x {\displaystyle {\begin{array}{lcl}{\dfrac {\partial SSD(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})}{\partial \mu }}&=&{\dfrac {2}{\left|\Omega _{F}\right|}}\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\mathcal {I_{M}}}({T}_{\mu }(x_{i}))\right){\dfrac {\partial {\mathcal {I_{M}}}({T}_{\mu }(x_{i})}{\partial \mu }}\\&=&{\dfrac {2}{\left|\Omega _{F}\right|}}\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\mathcal {I_{M}}}({T}_{\mu }(x_{i}))\right)\left({\dfrac {\partial {T}_{\mu }(x_{i})}{\partial \mu }}\right)^{t}{\dfrac {\partial {\mathcal {I_{M}}}({T}_{\mu }(x_{i}))}{\partial x}}\\\end{array}}} ==== Gradient method ==== Once the metric gradient has been computed, one has to find an optimization strategy The gradient method principle is explained below: μ k + 1 = μ k + α k d k {\displaystyle \mu _{k+1}=\mu _{k}+\alpha _{k}d_{k}} The gradient step can be constant or updated at every iteration. d k = − γ k ∂ C ( μ , I F , I M ) ∂ μ {\displaystyle d_{k}=-\gamma _{k}{\dfrac {\partial {\mathcal {C}}(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})}{\partial \mu }}} , γ k {\displaystyle \gamma _{k}} allows one to choose between the following methods : γ k {\displaystyle \gamma _{k}} ⟹ {\displaystyle \Longrightarrow } steepest descent, γ k = [ ∂ C ( μ , I F , I M ) ∂ μ ∂ C ( μ , I F , I M ) ∂ μ t ] − 1 {\displaystyle \gamma _{k}=\left[{\dfrac {\partial {\mathcal {C}}(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})}{\partial \mu }}{\dfrac {\partial {\mathcal {C}}(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})}{\partial \mu }}^{t}\right]^{-1}} ⟹ {\displaystyle \Longrightarrow } Gauss-Newto

  Read more →
• 

  Imaging phantom

  An imaging phantom, or simply phantom (less commonly spelled fantom), is a specially designed object that is scanned or imaged in the field of medical imaging to evaluate, analyze, and tune the performance of various imaging devices. A phantom is more readily available and provides more consistent results than the use of a living subject or cadaver, while also avoiding direct risks to living subjects. Phantoms were originally employed in 2D x-ray–based imaging techniques such as radiography or fluoroscopy, but more recently phantoms with desired imaging characteristics have been developed for 3D techniques such as SPECT, MRI, CT, ultrasound, PET, and other imaging modalities. == Design == A phantom used to evaluate an imaging device should respond in a similar manner to how human tissues and organs would act in that specific imaging modality. For instance, phantoms made for 2D radiography may hold various quantities of x-ray contrast agents with similar x-ray absorbing properties (such as the attenuation coefficient) to normal tissue to tune the contrast of the imaging device or modulate the patient's exposure to radiation. In such a case, the radiography phantom would not necessarily need to have similar textures and mechanical properties since these are not relevant in x-ray imaging modalities. However, in the case of ultrasonography, a phantom with similar rheological and ultrasound scattering properties to real tissue would be essential, but x-ray absorbing properties would not be relevant. The term "phantom" describes an object that is designed to resemble human tissue and can be evaluated, analyzed or manipulated to study the performance of a medical device. Phantoms are created using a digital file that is rendered through magnetic resonance imaging (MRI) or computer-aided design (CAD). The digital files allow for quick modifications that are read by the 3D printer. The 3D printer will create the product in successive layers using polymeric materials. There are several types of phantoms including tissue-mimicking, radiological phantoms, dental phantoms, BOMABs (used to calibrate whole-body counters), and more.

  Read more →