AI Chatbot Online Characters

AI Chatbot Online Characters — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Foveated imaging

  Foveated imaging is a digital image processing technique in which the image resolution, or amount of detail, varies across the image according to one or more "fixation points". A fixation point indicates the highest resolution region of the image and corresponds to the center of the eye's retina, the fovea. The location of a fixation point may be specified in many ways. For example, when viewing an image on a computer monitor, one may specify a fixation using a pointing device, like a computer mouse. Eye trackers which precisely measure the eye's position and movement are also commonly used to determine fixation points in perception experiments. When the display is manipulated with the use of an eye tracker, this is known as a gaze contingent display. Fixations may also be determined automatically using computer algorithms. Some common applications of foveated imaging include imaging sensor hardware and image compression. For descriptions of these and other applications, see the list below. Miniaturized foveated imaging systems can be realized by high-resolution 3D printing of multi-lens objectives directly on a CMOS (Complementary metal-oxide-semiconductor) chip. Foveated imaging is also commonly referred to as space variant imaging or gaze contingent imaging. == Applications == === Compression === Contrast sensitivity falls off dramatically as one moves from the center of the retina to the periphery. In lossy image compression, one may take advantage of this fact in order to compactly encode images. If one knows the viewer's approximate point of gaze, one may reduce the amount of information contained in the image as the distance from the point of gaze increases. Because the fall-off in the eye's resolution is dramatic, the potential reduction in display information can be substantial. Also, foveation encoding may be applied to the image before other types of image compression are applied and therefore can result in a multiplicative reduction. === Foveated sensors === Foveated sensors are multiresolution hardware devices that allow image data to be collected with higher resolution concentrated at a fixation point. An advantage to using foveated sensor hardware is that the image collection and encoding can occur much faster than in a system that post-processes a high resolution image in software. === Simulation === Foveated imaging has been used to simulate visual fields with arbitrary spatial resolution. For example, one may present video containing a blurred region representing a scotoma. By using an eye-tracker and holding the blurred region fixed relative to the viewer's gaze, the viewer will have a visual experience similar to that of a person with an actual scotoma. === Video gaming === Foveated rendering is a rendering optimization technique which uses an eye tracker integrated with a virtual reality headset to reduce the rendering workload by greatly reducing the image quality in the peripheral vision (outside of the zone gazed by the fovea).. However, other than the near-eye displays (e.g., virtual reality headset), foveated rendering is also suitable for large high-resolution display walls, desktop monitor, and even for smart phones. Over the time different foveated rendering techniques are proposed, for instance, adaptive resolution, geometric simplification, shading simplification and chromatic degradation, spatio-temporal deterioration . If we consider the variable sample distribution of physically-based rendering under the shader (e.g., hit/miss etc.), then this degradation strategies are applied on overall foveated rendering. At the CES 2016, SensoMotoric Instruments (SMI) demoed a new 250 Hz eye tracking system and a working foveated rendering solution. It resulted from a partnership with camera sensor manufacturer Omnivision who provided the camera hardware for the new system. The Apple Vision Pro mixed reality headset features dynamic foveated rendering provided by its visionOS operating system. === Quality assessment === Foveated imaging may be useful in providing a subjective image quality measure. Traditional image quality measures, such as peak signal-to-noise ratio, are typically performed on fixed resolution images and do not take into account some aspects of the human visual system, like the change in spatial resolution across the retina. A foveated quality index may therefore more accurately determine image quality as perceived by humans. === Image database retrieval === In databases that contain very high resolution images, such as a satellite image database, it may be desirable to interactively retrieve images in order to reduce retrieval time. Foveated imaging allows one to scan low resolution images and retrieve only high resolution portions as they are needed. This is sometimes called progressive transmission. == Example images ==

  Read more →
• 

  Data definition specification

  In computing, a data definition specification (DDS) is a guideline to ensure comprehensive and consistent data definition. It represents the attributes required to quantify data definition. A comprehensive data definition specification encompasses enterprise data, the hierarchy of data management, prescribed guidance enforcement and criteria to determine compliance. == Overview == A data definition specification may be developed for any organization or specialized field, improving the quality of its products through consistency and transparency. It eliminates redundancy (since all contributing areas are referencing the same specification) and provides standardization and degrees of compliance, making it easier and more efficient to create, modify, verify, analyze and share information across the enterprise. To understand how a data definition specification works in an enterprise, we must look at the elements of a DDS. Writing data definitions, defining business terms (or rules) in the context of a particular environment, provides structure for an organization's data architecture. In developing these definitions, the words used must be traceable to clearly defined data. A data definition specification may be used in the following activities: Business intelligence Business process modeling Business rules management Data analysis and modeling Information architecture Metadata modeling Data mastering Report generation == Criteria == A data definition specification requires data definitions to be: Atomic – singular, describing only one concept. Commonly used and ambiguous terms should be defined. While a term refers to one concept, several words may be used in a term: File – A concept identifiable with one word File extension – A concept identifiable with more than one word Traceable – Mapped to a specific data element. In business, a term may be traced to an entity (for example, a customer) or an attribute (such as a customer's name). A term may be a value in a data set (such as gender), or designate the data set itself. Traceability indicates relationships in the data hierarchy. Consistent - Used in a standard syntax; if used in a specific context, the context is noted Accurate - Precise, correct and unambiguous, stating what the term is and is not Clear - Readily understood by the reader Complete - With the term, its description and contextual references Concise - To avoid circular references == Applications == === Enterprise data === A data definition specification was produced by the Open Mobile Alliance to document charging data. The document, the centralized catalog of data elements defined for interfaces, specifies the mapping of these data elements to protocol fields in the interfaces. Created for the exchange of financial data, Market Data Definition Language (MDDL) is an XML specification designed to enable the interchange of information necessary to account, to analyze, and to trade financial instruments of the world's markets. It defines an XML-based interchange format and common data dictionary on the fields needed to describe: (1) financial instruments, (2) corporate events affecting value and tradability, and (3) market-related, economic and industrial indicators. The principal function of MDDL is to allow entities to exchange market data by standardizing formats and definitions. MDDL provides a common format for market data so that it can be efficiently passed from one processing system to another and provides a common understanding of market data content by standardizing terminology and by normalizing the relationships of various data elements to one another ... From the user perspective, the goal of MDDL is to enable users to integrate data from multiple sources by standardizing both the input feeds used for data warehousing (i.e., define what's being provided by vendors) and the output methods by which client applications request the data (i.e., ensure compatibility on how to get data in and out of applications)." === Clinical submissions === The Clinical Data Interchange Standards Consortium, a global, multidisciplinary, non-profit organization, has established standards to support the acquisition, exchange, submission and archiving of clinical research data and metadata. CDISC standards are vendor-neutral, platform-independent and freely available from the CDISC website. The Case Report Tabulation Data Definition Specification (define.xml) draft version 2.0, the oldest data definition specification, is part of the evolution from the 1999 FDA electronic submission (eSub) guidance and electronic Common Technical Document (eCTD) documents specifying that a document describing the content and structure of included data be included in a submission. Define.xml was developed to automate the review process by generating a machine-readable data-definition document. Define.xml has standardized submissions to the Food and Drug Administration, reducing review times from over two years to several months. === Archival data === A data definition specification is the foundation of metadata for scientific data archiving. The Metadata Encoding and Transmission Standard (METS) uses one principle of a DDS: consistent use of key terms to catalog digital objects for global use. The METS schema is a flexible mechanism for encoding descriptive, administrative and structural metadata for a digital library object and expressing complex links between metadata, and can provide a useful standard for the exchange of digital-library objects between repositories. A similar effort is underway to preserve complex data associated with video-game archiving. Preserving Virtual Worlds attempted to address archival-format deficiencies, citing the lack of suitable documentation for interactive fiction and games at the bit level: specifically, the absence of "representation information" needed to map raw bits into higher-level data constructs. Preserving Virtual Worlds 2 is a research project expanding on initial efforts in this field.

  Read more →
• 

  Superincreasing sequence

  In mathematics, a sequence of positive real numbers ( s 1 , s 2 , . . . ) {\displaystyle (s_{1},s_{2},...)} is called superincreasing if every element of the sequence is greater than the sum of all previous elements in the sequence. Formally, this condition can be written as s n + 1 > ∑ j = 1 n s j {\displaystyle s_{n+1}>\sum _{j=1}^{n}s_{j}} for all n ≥ 1. == Program == The following Python source code tests a sequence of numbers to determine if it is superincreasing: This produces the following output: Sum: 0 Element: 1 Sum: 1 Element: 3 Sum: 4 Element: 6 Sum: 10 Element: 13 Sum: 23 Element: 27 Sum: 50 Element: 52 Is it a superincreasing sequence? True == Examples == (1, 3, 6, 13, 27, 52) is a superincreasing sequence, but (1, 3, 4, 9, 15, 25) is not. The series a^x for a>=2 == Properties == Multiplying a superincreasing sequence by a positive real constant keeps it superincreasing.

  Read more →
• 

  CryptoParty

  CryptoParty (Crypto-Party) is a grassroots global endeavour to introduce the basics of practical cryptography such as the Tor anonymity network, I2P, Freenet, key signing parties, disk encryption and virtual private networks to the general public. The project primarily consists of a series of free public workshops. == History == As a successor to the Cypherpunks of the 1990s, CryptoParty was conceived in late August 2012 by the Australian journalist Asher Wolf in a Twitter post following the passing of the Cybercrime Legislation Amendment Bill 2011 and the proposal of a two-year data retention law in that country, the Cybercrime Legislation Amendment Bill 2011. The DIY, self-organizing movement immediately went viral, with a dozen autonomous CryptoParties being organized within hours in cities throughout Australia, the US, the UK, and Germany. Many more parties were soon organized or held in Chile, The Netherlands, Hawaii, Asia, etc. Tor usage in Australia itself spiked, and CryptoParty London with 130 attendees—some of whom were veterans of the Occupy London movement—had to be moved from London Hackspace to the Google campus in east London's Tech City. As of mid-October 2012 some 30 CryptoParties have been held globally, some on a continuing basis, and CryptoParties were held on the same day in Reykjavik, Brussels, and Manila. The first draft of the 442-page CryptoParty Handbook (the hard copy of which is available at cost) was pulled together in three days using the book sprint approach, and was released 2012-10-04 under a CC BY-SA license. === Edward Snowden involvement === In May 2014, Wired reported that Edward Snowden, while employed by Dell as an NSA contractor, organized a local CryptoParty at a small hackerspace in Honolulu, Hawaii on December 11, six months before becoming well known for leaking tens of thousands of secret U.S. government documents. During the CryptoParty, Snowden taught 20 Hawaii residents how to encrypt their hard drives and use the Internet anonymously. The event was filmed by Snowden's then-girlfriend, but the video has never been released online. In a follow-up post to the CryptoParty wiki, Snowden pronounced the event a "huge success." == Media response == In 2013, CryptoParty received messages of support from the Electronic Frontier Foundation and (purportedly) AnonyOps, as well as the NSA whistleblower Thomas Drake, WikiLeaks central editor Heather Marsh, and Wired reporter Quinn Norton. Eric Hughes, the author of A Cypherpunk's Manifesto nearly two decades before, delivered the keynote address, Putting the Personal Back in Personal Computers, at the Amsterdam CryptoParty on 2012-09-27. Marcin de Kaminski, founding member of Piratbyrån which in turn founded The Pirate Bay, regarded CryptoParty as the most important civic project in cryptography in 2012, and Cory Doctorow has characterized a CryptoParty as being "like a Tupperware party for learning crypto." Der Spiegel in December 2014 mentioned "crypto parties" in the wake of the Edward Snowden leaks in an article about the NSA.

  Read more →
• 

  Instance-based learning

  In machine learning, instance-based learning (sometimes called memory-based learning) is a family of learning algorithms that, instead of performing explicit generalization, compare new problem instances with instances seen in training, which have been stored in memory. Because computation is postponed until a new instance is observed, these algorithms are sometimes referred to as "lazy." It is called instance-based because it constructs hypotheses directly from the training instances themselves. This means that the hypothesis complexity can grow with the data: in the worst case, a hypothesis is a list of n training items and the computational complexity of classifying a single new instance is O(n). One advantage that instance-based learning has over other methods of machine learning is its ability to adapt its model to previously unseen data. Instance-based learners may simply store a new instance or throw an old instance away. Examples of instance-based learning algorithms are the k-nearest neighbors algorithm, kernel machines and RBF networks. These store (a subset of) their training set; when predicting a value/class for a new instance, they compute distances or similarities between this instance and the training instances to make a decision. To battle the memory complexity of storing all training instances, as well as the risk of overfitting to noise in the training set, instance reduction algorithms have been proposed.

  Read more →
• 

  Cryptographic Service Provider

  A cryptographic service provider (CSP) is a package that "provides a concrete implementation of certain cryptographic services." A CSP offers operations and protocols to support a variety of use cases. The cryptographic application programming interface (API) provided by the CSP provides common solutions for different platforms, for example hardware and cloud services. == Microsoft Windows == In Microsoft Windows, a Cryptographic Service Provider is a software library that implements the Microsoft CryptoAPI (CAPI). CSPs implement encoding and decoding functions, which computer application programs may use, for example, to implement strong user authentication or for secure email. CSPs are independent modules that can be used by different applications. A user program calls CryptoAPI functions and these are redirected to CSPs functions. Since CSPs are responsible for implementing cryptographic algorithms and standards, applications do not need to be concerned about security details. Furthermore, each application can define which CSP it is going to use on its calls to CryptoAPI. In fact, all cryptographic activity is implemented in CSPs. CryptoAPI only works as a bridge between the application and the CSP. CSPs are implemented basically as a special type of DLL with special restrictions on loading and use. Every CSP must be digitally signed by Microsoft and the signature is verified when Windows loads the CSP. In addition, after being loaded, Windows periodically re-scans the CSP to detect tampering, either by malicious software such as computer viruses or by the user him/herself trying to circumvent restrictions (for example on cryptographic key length) that might be built into the CSP's code. To obtain a signature, non-Microsoft CSP developers must supply paperwork to Microsoft promising to obey various legal restrictions and giving valid contact information. As of circa 2000, Microsoft did not charge any fees to supply these signatures. For development and testing purposes, a CSP developer can configure Windows to recognize the developer's own signatures instead of Microsoft's, but this is a somewhat complex and obscure operation unsuitable for nontechnical end users. The CAPI/CSP architecture had its origins in the era of restrictive US government controls on the export of cryptography. Microsoft's default or "base" CSP then included with Windows was limited to 512-bit RSA public-key cryptography and 40-bit symmetric cryptography, the maximum key lengths permitted in exportable mass market software at the time. CSPs implementing stronger cryptography were available only to U.S. residents, unless the CSPs themselves had received U.S. government export approval. The system of requiring CSPs to be signed only on presentation of completed paperwork was intended to prevent the easy spread of unauthorized CSPs implemented by anonymous or foreign developers. As such, it was presented as a concession made by Microsoft to the government, in order to get export approval for the CAPI itself. After the Bernstein v. United States court decision establishing computer source code as protected free speech and the transfer of cryptographic regulatory authority from the U.S. State Department to the more pro-export Commerce Department, the restrictions on key lengths were dropped, and the CSPs shipped with Windows now include full-strength cryptography. The main use of third-party CSPs is to interface with external cryptography hardware such as hardware security modules (HSM) or smart cards. === Smart Card CSP === These cryptographic functions can be realized by a smart card, thus the Smart Card CSP is the Microsoft way of a PKCS#11. Microsoft Windows is identifying the correct Smart Card CSP, which have to be used, analyzing the answer to reset (ATR) of the smart card, which is registered in the Windows Registry. Installing a new CSP, all ATRs of the supported smart cards are enlisted in the registry. === Use of CSP in MS Office password protection === Cryptographic service providers can be used for encryption of Word, Excel, and PowerPoint documents starting from Microsoft Office XP. A standard encryption algorithm with a 40-bit key is used by default, but enabling a CSP enhances key length and thus makes decryption process more continuous. This only applies to passwords that are required to open document because this password type is the only one that encrypts a password-protected document.

  Read more →
• 

  Corporate surveillance

  Corporate surveillance describes the practice of businesses monitoring and extracting information from their users, clients, or staff. This information may consist of online browsing history, email correspondence, phone calls, location data, and other private details. Acts of corporate surveillance frequently look to boost results, detect potential security problems, or adjust advertising strategies. These practices have been criticized for violating ethical standards and invading personal privacy. Critics and privacy activists have called for businesses to incorporate rules and transparency surrounding their monitoring methods to ensure they are not misusing their position of authority or breaching regulatory standards. Monitoring can feel intrusive and give the impression that the business does not promote ethical behavior among its personnel. Staff satisfaction, productivity, and staff turnover may all suffer as a result of the invasion of privacy. == Monitoring methods == Employers may be authorized to gather information through keystroke logging and mouse tracking, which involves recording the keys individuals interact with and cursor position on computers. In cases where employment contracts permit it, they may also monitor webcam activity on company-provided computers. Employers may be able to view the emails sent from business accounts and may be able to see the websites visited when using a corporate internet connection. The screenshot capability is another tool that enables companies to see what remote workers are doing. This feature, which can be found in tracking software, takes screenshots throughout the day at predetermined or arbitrary intervals. Additionally, people who don't work in offices are observed. For instance, it has been claimed that Amazon has incorporated tracking technology to monitor warehouse staff and delivery drivers. == Use of collected information == Information collected by corporations can be used for a variety of uses including marketing research, targeting advertising, fraud detection and prevention, ensuring policy adherence, preventing lawsuits, and safeguarding records and company assets. == Privacy concerns == Concerns over corporate privacy have become more important due to companies collection and manipulation of personal data. Since these practices have been recognized there has been a rising concern about both the security and the possible mishandling of the data accumulated. Social Media data collection and monitoring has been one of the most concerned areas regarding corporate surveillance. Recently, many employers on CareerBuilder have checked their potential candidates' social media activities before the hiring process. This approach can be excusable since it is important to be aware of a future employee or applicant's online presence, and how it might affect the company's reputation in the future. This is crucial since employers are often made legally responsible for their worker's digital actions. These data can also be used to enact political gains. The Facebook-Cambridge Analytica data scandal in 2018 revealed that its British branch to have surreptitiously sold American psychological data to the Trump campaign. This information was supposed to be private, but Facebook's inability to protect user information had reportedly not been a top priority of the company at the time. == Laws and regulations == The National Labor and Relations Act (NLRA) safeguards workplace democracy by giving workers in the private sector the basic freedom to demand better working conditions and choice of representation without fear of retaliation. General Data Protection Regulation (GDPR) outlines the broad responsibilities of data controllers and the "processors" that handle personal data on their behalf. They must adopt the necessary security measures in accordance with the risk involved in the data processing operations they carry out.[1] Electronics Communication Privacy Act (ECPA), as amended, provides protection for electronic, oral, and wire communications while they are being created, while they are being sent, and while they are being stored on computers. Email, phone calls, and electronically stored data are covered by the Act. == Sale of customer data == If it is business intelligence, data collected on individuals and groups can be sold to other corporations, so that they can use it for the aforementioned purpose. It can be used for direct marketing purposes, such as targeted advertisements on Google and Yahoo. These ads are tailored to the individual user of the search engine by analyzing their search history and emails (if they use free webmail services). For example, the world's most popular web search engine stores identifying information for each web search. Google stores an IP address and the search phrase used in a database for up to 2 years. Google also scans the content of emails of users of its Gmail webmail service, in order to create targeted advertising based on what people are talking about in their personal email correspondences. Google is, by far, the largest web advertising agency. Their revenue model is based on receiving payments from advertisers for each page-visit resulting from a visitor clicking on a Google AdWords ad, hosted either on a Google service or a third-party website. Millions of sites place Google's advertising banners and links on their websites, in order to share this profit from visitors who click on the ads. Each page containing Google advertisements adds, reads, and modifies cookies on each visitor's computer. These cookies track the user across all of these sites, and gather information about their web surfing habits, keeping track of which sites they visit, and what they do when they are on these sites. This information, along with the information from their email accounts, and search engine histories, is stored by Google to use for building a profile of the user to deliver better-targeted advertising. == Surveillance of workers == In 1993, David Steingard and Dale Fitzgibbons argued that modern management, far from empowering workers, had features of neo-Taylorism, where teamwork perpetuated surveillance and control. They argued that employees had become their own "thought police" and the team gaze was the equivalent of Bentham's panopticon guard tower. A critical evaluation of the Hawthorne Plant experiments has in turn given rise to the notion of a Hawthorne effect, where workers increase their productivity in response to their awareness of being observed or because they are gratified for being chosen to participate in a project. According to the American Management Association and the ePolicy Institute, who undertook a quantitative survey in 2007 about electronic monitoring and surveillance with approximately 300 US companies, "more than one fourth of employers have fired workers for misusing email and nearly one third have fired employees for misusing the Internet." Furthermore, about 30 percent of the companies had also fired employees for usage of "inappropriate or offensive language" and "viewing, downloading, or uploading inappropriate/offensive content." More than 40 percent of the companies monitor email traffic of their workers, and 66 percent of corporations monitor Internet connections. In addition, most companies use software to block websites such as sites with games, social networking, entertainment, shopping, and sports. The American Management Association and the ePolicy Institute also stress that companies track content that is being written about them, for example by monitoring blogs and social media, and scanning all files that are stored in a filesystem. == Government use of corporate surveillance data == The United States government often gains access to corporate databases, either by producing a warrant for it, or by asking. The Department of Homeland Security has openly stated that it uses data collected from consumer credit and direct marketing agencies—such as Google—for augmenting the profiles of individuals that it is monitoring. The US government has gathered information from grocery store discount card programs, which track customers' shopping patterns and store them in databases, in order to look for terrorists by analyzing shoppers' buying patterns. == Corporate surveillance of citizens == According to Dennis Broeders, "Big Brother is joined by big business". He argues that corporations are in any event interested in data on their potential customers and that placing some forms of surveillance in the hands of companies, results in companies owning video surveillance data for stores and public places. The commercial availability of surveillance systems has led to their rapid spread. Therefore it is almost impossible for citizens to maintain their anonymity. When businesses can monitor their customers, such customers run the risk of facing prejudice when applying for housing, loans, jobs, and other economic opportun

  Read more →
• 

  Code (cryptography)

  In cryptology, a code is a method used to encrypt a message that operates at the level of meaning; that is, words or phrases are converted into something else. A code might transform "change" into "CVGDK" or "cocktail lounge". The U.S. National Security Agency defined a code as "A substitution cryptosystem in which the plaintext elements are primarily words, phrases, or sentences, and the code equivalents (called "code groups") typically consist of letters or digits (or both) in otherwise meaningless combinations of identical length." A codebook is needed to encrypt, and decrypt the phrases or words. By contrast, ciphers encrypt messages at the level of individual letters, or small groups of letters, or even, in modern ciphers, individual bits. Messages can be transformed first by a code, and then by a cipher. Such multiple encryption, or "superencryption" aims to make cryptanalysis more difficult. Another comparison between codes and ciphers is that a code typically represents a letter or groups of letters directly without the use of mathematics. As such the numbers are configured to represent these three values: 1001 = A, 1002 = B, 1003 = C, ... . The resulting message, then would be 1001 1002 1003 to communicate ABC. Ciphers, however, utilize a mathematical formula to represent letters or groups of letters. For example, A = 1, B = 2, C = 3, ... . Thus the message ABC results by multiplying each letter's value by 13. The message ABC, then would be 13 26 39. Codes have a variety of drawbacks, including susceptibility to cryptanalysis and the difficulty of managing the cumbersome codebooks, so ciphers are now the dominant technique in modern cryptography. In contrast, because codes are representational, they are not susceptible to mathematical analysis of the individual codebook elements. In the example, the message 13 26 39 can be cracked by dividing each number by 13 and then ranking them alphabetically. However, the focus of codebook cryptanalysis is the comparative frequency of the individual code elements matching the same frequency of letters within the plaintext messages using frequency analysis. In the above example, the code group, 1001, 1002, 1003, might occur more than once and that frequency might match the number of times that ABC occurs in plain text messages. (In the past, or in non-technical contexts, code and cipher are often used to refer to any form of encryption). == One- and two-part codes == Codes are defined by "codebooks" (physical or notional), which are dictionaries of codegroups listed with their corresponding plaintext. Codes originally had the codegroups assigned in 'plaintext order' for convenience of the code designed, or the encoder. For example, in a code using numeric code groups, a plaintext word starting with "a" would have a low-value group, while one starting with "z" would have a high-value group. The same codebook could be used to "encode" a plaintext message into a coded message or "codetext", and "decode" a codetext back into plaintext message. In order to make life more difficult for codebreakers, codemakers designed codes with no predictable relationship between the codegroups and the ordering of the matching plaintext. In practice, this meant that two codebooks were now required, one to find codegroups for encoding, the other to look up codegroups to find plaintext for decoding. Such "two-part" codes required more effort to develop, and twice as much effort to distribute (and discard safely when replaced), but they were harder to break. The Zimmermann Telegram in January 1917 used the German diplomatic "0075" two-part code system which contained upwards of 10,000 phrases and individual words. == One-time code == A one-time code is a prearranged word, phrase or symbol that is intended to be used only once to convey a simple message, often the signal to execute or abort some plan or confirm that it has succeeded or failed. One-time codes are often designed to be included in what would appear to be an innocent conversation. Done properly they are almost impossible to detect, though a trained analyst monitoring the communications of someone who has already aroused suspicion might be able to recognize a comment like "Aunt Bertha has gone into labor" as having an ominous meaning. Famous example of one time codes include: In the Bible, Jonathan prearranges a code with David, who is going into hiding from Jonathan's father, King Saul. If, during archery practice, Jonathan tells the servant retrieving arrows "the arrows are on this side of you," David may safely return to court; if the command is "the arrows are beyond you," David must flee. "One if by land; two if by sea" in "Paul Revere's Ride" made famous in the poem by Henry Wadsworth Longfellow "Climb Mount Niitaka" - the signal to Japanese planes to begin the attack on Pearl Harbor During World War II the British Broadcasting Corporation's overseas service frequently included "personal messages" as part of its regular broadcast schedule. The seemingly nonsensical stream of messages read out by announcers were actually one time codes intended for Special Operations Executive (SOE) agents operating behind enemy lines. An example might be "The princess wears red shoes" or "Mimi's cat is asleep under the table". Each code message was read out twice. By such means, the French Resistance were instructed to start sabotaging rail and other transport links the night before D-day. "Over all of Spain, the sky is clear" was a signal (broadcast on radio) to start the nationalist military revolt in Spain on July 17, 1936. Sometimes messages are not prearranged and rely on shared knowledge hopefully known only to the recipients. An example is the telegram sent to U.S. President Harry Truman, then at the Potsdam Conference to meet with Soviet premier Joseph Stalin, informing Truman of the first successful test of an atomic bomb. "Operated on this morning. Diagnosis not yet complete but results seem satisfactory and already exceed expectations. Local press release necessary as interest extends great distance. Dr. Groves pleased. He returns tomorrow. I will keep you posted." == Idiot code == An idiot code is a code that is created by the parties using it. This type of communication is akin to the hand signals used by armies in the field. Example: Any sentence where 'day' and 'night' are used means 'attack'. The location mentioned in the following sentence specifies the location to be attacked. Plaintext: Attack X. Codetext: We walked day and night through the streets but couldn't find it! Tomorrow we'll head into X. An early use of the term appears to be by George Perrault, a character in the science fiction book Friday by Robert A. Heinlein: The simplest sort [of code] and thereby impossible to break. The first ad told the person or persons concerned to carry out number seven or expect number seven or it said something about something designated as seven. This one says the same with respect to code item number ten. But the meaning of the numbers cannot be deduced through statistical analysis because the code can be changed long before a useful statistical universe can be reached. It's an idiot code... and an idiot code can never be broken if the user has the good sense not to go too often to the well. Terrorism expert Magnus Ranstorp said that the men who carried out the September 11 attacks on the United States used basic e-mail and what he calls "idiot code" to discuss their plans. == Cryptanalysis of codes == While solving a monoalphabetic substitution cipher is easy, solving even a simple code is difficult. Decrypting a coded message is a little like trying to translate a document written in a foreign language, with the task basically amounting to building up a "dictionary" of the codegroups and the plaintext words they represent. One fingerhold on a simple code is the fact that some words are more common than others, such as "the" or "a" in English. In telegraphic messages, the codegroup for "STOP" (i.e., end of sentence or paragraph) is usually very common. This helps define the structure of the message in terms of sentences, if not their meaning, and this is cryptanalytically useful. Further progress can be made against a code by collecting many codetexts encrypted with the same code and then using information from other sources spies newspapers diplomatic cocktail party chat the location from where a message was sent where it was being sent to (i.e., traffic analysis) the time the message was sent, events occurring before and after the message was sent the normal habits of the people sending the coded messages etc. For example, a particular codegroup found almost exclusively in messages from a particular army and nowhere else might very well indicate the commander of that army. A codegroup that appears in messages preceding an attack on a particular location may very well stand for that location. Cribs can be an immediate giveaway to the definiti

  Read more →
• 

  Line integral convolution

  In scientific visualization, line integral convolution (LIC) is a method to visualize a vector field (such as fluid motion) at high spatial resolutions. The LIC technique was first proposed by Brian Cabral and Leith Casey Leedom in 1993. In LIC, discrete numerical line integration is performed along the field lines (curves) of the vector field on a uniform grid. The integral operation is a convolution of a filter kernel and an input texture, often white noise. In signal processing, this process is known as a discrete convolution. == Overview == Traditional visualizations of vector fields use small arrows or lines to represent vector direction and magnitude. This method has a low spatial resolution, which limits the density of presentable data and risks obscuring characteristic features in the data. More sophisticated methods, such as streamlines and particle tracing techniques, can be more revealing but are highly dependent on proper seed points. Texture-based methods, like LIC, avoid these problems since they depict the entire vector field at point-like (pixel) resolution. Compared to other integration-based techniques that compute field lines of the input vector field, LIC has the advantage that all structural features of the vector field are displayed, without the need to adapt the start and end points of field lines to the specific vector field. In other words, it shows the topology of the vector field. In user testing, LIC was found to be particularly good for identifying critical points. == Algorithm == === Informal description === LIC causes output values to be strongly correlated along the field lines, but uncorrelated in orthogonal directions. As a result, the field lines contrast each other and stand out visually from the background. Intuitively, the process can be understood with the following example: the flow of a vector field can be visualized by overlaying a fixed, random pattern of dark and light paint. As the flow passes by the paint, the fluid picks up some of the paint's color, averaging it with the color it has already acquired. The result is a randomly striped, smeared texture where points along the same streamline tend to have a similar color. Other physical examples include: whorl patterns of paint, oil, or foam on a river visualisation of magnetic field lines using randomly distributed iron filings fine sand being blown by strong wind === Formal mathematical description === Although the input vector field and the result image are discretized, it pays to look at it from a continuous viewpoint. Let v {\displaystyle \mathbf {v} } be the vector field given in some domain Ω {\displaystyle \Omega } . Although the input vector field is typically discretized, we regard the field v {\displaystyle \mathbf {v} } as defined in every point of Ω {\displaystyle \Omega } , i.e. we assume an interpolation. Streamlines, or more generally field lines, are tangent to the vector field in each point. They end either at the boundary of Ω {\displaystyle \Omega } or at critical points where v = 0 {\displaystyle \mathbf {v} =\mathbf {0} } . For the sake of simplicity, critical points and boundaries are ignored in the following. A field line σ {\displaystyle {\boldsymbol {\sigma }}} , parametrized by arc length s {\displaystyle s} , is defined as d σ ( s ) d s = v ( σ ( s ) ) | v ( σ ( s ) ) | . {\displaystyle {\frac {d{\boldsymbol {\sigma }}(s)}{ds}}={\frac {\mathbf {v} ({\boldsymbol {\sigma }}(s))}{|\mathbf {v} ({\boldsymbol {\sigma }}(s))|}}.} Let σ r ( s ) {\displaystyle {\boldsymbol {\sigma }}_{\mathbf {r} }(s)} be the field line that passes through the point r {\displaystyle \mathbf {r} } for s = 0 {\displaystyle s=0} . Then the image gray value at r {\displaystyle \mathbf {r} } is set to D ( r ) = ∫ − L / 2 L / 2 k ( s ) N ( σ r ( s ) ) d s {\displaystyle D(\mathbf {r} )=\int _{-L/2}^{L/2}k(s)N({\boldsymbol {\sigma }}_{\mathbf {r} }(s))ds} where k ( s ) {\displaystyle k(s)} is the convolution kernel, N ( r ) {\displaystyle N(\mathbf {r} )} is the noise image, and L {\displaystyle L} is the length of field line segment that is followed. D ( r ) {\displaystyle D(\mathbf {r} )} has to be computed for each pixel in the LIC image. If carried out naively, this is quite expensive. First, the field lines have to be computed using a numerical method for solving ordinary differential equations, like a Runge–Kutta method, and then for each pixel the convolution along a field line segment has to be calculated. The final image will normally be colored in some way. Typically, some scalar field in Ω {\displaystyle \Omega } (like the vector length) is used to determine the hue, while the grayscale LIC output determines the brightness. Different choices of convolution kernels and random noise produce different textures; for example, pink noise produces a cloudy pattern where areas of higher flow stand out as smearing, suitable for weather visualization. Further refinements in the convolution can improve the quality of the image. === Programming description === Algorithmically, LIC takes a vector field and noise texture as input, and outputs a texture. The process starts by generating in the domain of the vector field a random gray level image at the desired output resolution. Then, for every pixel in this image, the forward and backward streamline of a fixed arc length is calculated. The value assigned to the current pixel is computed by a convolution of a suitable convolution kernel with the gray levels of all the noise pixels lying on a segment of this streamline. This creates a gray level LIC image. == Versions == === Basic === Basic LIC images are grayscale images, without color and animation. While such LIC images convey the direction of the field vectors, they do not indicate orientation; for stationary fields, this can be remedied by animation. Basic LIC images do not show the length of the vectors (or the strength of the field). === Color === The length of the vectors (or the strength of the field) is usually coded in color; alternatively, animation can be used. === Animation === LIC images can be animated by using a kernel that changes over time. Samples at a constant time from the streamline would still be used, but instead of averaging all pixels in a streamline with a static kernel, a ripple-like kernel constructed from a periodic function multiplied by a Hann function acting as a window (in order to prevent artifacts) is used. The periodic function is then shifted along the period to create an animation. === Fast LIC (FLIC) === The computation can be significantly accelerated by re-using parts of already computed field lines, specializing to a box function as convolution kernel k ( s ) {\displaystyle k(s)} and avoiding redundant computations during convolution. The resulting fast LIC method can be generalized to convolution kernels that are arbitrary polynomials. === Oriented Line Integral Convolution (OLIC) === Because LIC does not encode flow orientation, it cannot distinguish between streamlines of equal direction but opposite orientation. Oriented Line Integral Convolution (OLIC) solves this issue by using a ramp-like asymmetric kernel and a low-density noise texture. The kernel asymmetrically modulates the intensity along the streamline, producing a trace that encodes orientation; the low-density of the noise texture prevents smeared traces from overlapping, aiding readability. Fast Rendering of Oriented Line Integral Convolution (FROLIC) is a variation that approximates OLIC by rendering each trace in discrete steps instead of as a continuous smear. === Unsteady Flow LIC (UFLIC) === For time-dependent vector fields (unsteady flow), a variant called Unsteady Flow LIC has been designed that maintains the coherence of the flow animation. An interactive GPU-based implementation of UFLIC has been presented. === Parallel === Since the computation of an LIC image is expensive but inherently parallel, the process has been parallelized and, with availability of GPU-based implementations, interactive on PCs. === Multidimensional === Note that the domain Ω {\displaystyle \Omega } does not have to be a 2D domain: the method is applicable to higher dimensional domains using multidimensional noise fields. However, the visualization of the higher-dimensional LIC texture is problematic; one way is to use interactive exploration with 2D slices that are manually positioned and rotated. The domain Ω {\displaystyle \Omega } does not have to be flat either; the LIC texture can be computed also for arbitrarily shaped 2D surfaces in 3D space. == Applications == This technique has been applied to a wide range of problems since it first was published in 1993, both scientific and creative, including: Representing vector fields: visualization of steady (time-independent) flows (streamlines) visual exploration of 2D autonomous dynamical systems wind mapping water flow mapping Artistic effects for image generation and stylization: pencil drawing (auto

  Read more →
• 

  Cambridge Analytica

  Cambridge Analytica Ltd. (CA), previously known as SCL USA, was a British political consulting firm that came to prominence through the Facebook–Cambridge Analytica data scandal. It was founded in 2013, as a subsidiary of the private intelligence company and self-described "global election management agency" SCL Group by long-time SCL executives Nigel Oakes, Alexander Nix and Alexander Oakes, with Nix as CEO. Cambridge Analytica was hired by a variety of political actors, including the Trinidadian government in 2010 and the 2016 presidential campaigns of Ted Cruz and Donald Trump. The firm maintained offices in London, New York City, and Washington, D.C. The company closed operations in 2018 due to backlash from the scandal, although firms related to both Cambridge Analytica and its parent firm SCL still exist. == History == Cambridge Analytica was founded in 2013 as a subsidiary of the private intelligence company SCL Group, which describes itself as providing "data, analytics and strategy to governments and military organisations worldwide". The company was part of "an international web of companies" headed by the London-based SCL Group. Cambridge Analytica (SCL USA) was incorporated in January 2013 with its registered office being in Westferry Circus, London and consisting of just one staff member, director and CEO Alexander Nix (also appointed in January 2015). Nix was also the director of nine similar companies sharing the same registered offices in London, including Firecrest technologies, Emerdata and six SCL Group companies including "SCL elections limited". Nigel Oakes, known as the former boyfriend of Lady Helen Windsor, had founded the predecessor SCL Group in the 1990s, and in 2005 Oakes established SCL Group together with his brother Alexander Oakes and Alexander Nix; SCL Group was the parent company of Cambridge Analytica. Former Conservative minister and MP Sir Geoffrey Pattie was the founding chairman of SCL; Lord Ivar Mountbatten also joined Oakes as a director of the company. As a result of the Facebook–Cambridge Analytica data scandal, Nix was removed as CEO and replaced by Julian Wheatland before the company closed. Several of the company's executives were Old Etonians. The company's owners included several of the Conservative Party's largest donors such as billionaire Vincent Tchenguiz, former British Conservative minister Jonathan Marland, Baron Marland and the family of American hedge fund manager Robert Mercer. The company combined misappropriation of digital assets, data mining, data brokerage, and data analysis with strategic communication during electoral processes. While its parent SCL had focused on influencing elections in developing countries since the 1990s, Cambridge Analytica focused more on the western world, including the United Kingdom and the United States; CEO Alexander Nix has said CA was involved in 44 U.S. political races in 2014. In 2015, CA performed data analysis services for Ted Cruz's presidential campaign. In 2016, CA worked for Donald Trump's presidential campaign as well as for Leave.EU (one of the organisations campaigning in the United Kingdom's referendum on European Union membership). CA's role in those campaigns has been controversial and is the subject of ongoing inquiries in both countries. Political scientists question CA's claims about the effectiveness of its methods of targeting voters. == Data scandal == In March 2018, media outlets broke news of Cambridge Analytica's business practices. The New York Times and The Observer reported that the company had acquired and used personal data about Facebook users from an external researcher who had told Facebook he was collecting it for academic purposes. Shortly afterwards, Channel 4 News aired undercover investigative videos showing Nix boasting about using prostitutes, bribery sting operations, and honey traps to discredit politicians on whom it had conducted opposition research, and saying that the company "ran all of (Donald Trump's) digital campaign". In response to the media reports, the Information Commissioner's Office (ICO) of the UK pursued a warrant to search the company's servers. Facebook banned Cambridge Analytica from advertising on its platform, saying that it had been deceived. On 23 March 2018, the British High Court granted the ICO a warrant to search Cambridge Analytica's London offices. As a result, Nix was suspended as CEO, and replaced by Julian Wheatland. The personal data of up to 87 million Facebook users were acquired via the 270,000 Facebook users who used a Facebook app created by Aleksandr Kogan called "This Is Your Digital Life". This was a personality profiling app and asked simple personality questions similar to other Facebook quizzes. Kogan was a scientist and psychologist, also being an employed lecturer for the University of Cambridge from 2012 to 2018. Alexander Nix claimed they had close to five thousand data points on each person who participated. They also gathered information through other data brokers ending with them acquiring millions of data points from American citizens. Kogan's app exploited a feature of Facebook's Graph API (version 1.0), which permitted any third-party app to access not only the app user's data, but also the full profile data of all of that user's Facebook friends, without those friends' knowledge or consent. This platform-wide design was available to all developers and was used by tens of thousands of apps; Facebook CEO Mark Zuckerberg later told the House Energy and Commerce Committee that the company was auditing "tens of thousands" of apps that had had access to large amounts of user data. Because the average Facebook user at the time had approximately 300 friends, the 270,000 users who installed Kogan's app yielded data on up to 87 million people. Facebook deprecated the friends-data API in April 2014 and shut it down entirely in April 2015, but data already collected by apps remained in developers' possession. Kogan passed this data to Cambridge Analytica, breaching Facebook's terms of service. On 1 May 2018, Cambridge Analytica and its parent company SCL filed for insolvency proceedings and closed operations. Alexander Tayler, a former director for Cambridge Analytica, was appointed director of Emerdata on 28 March 2018. Rebekah Mercer, Jennifer Mercer, Alexander Nix and Johnson Chun Shun Ko, who has links to American businessman Erik Prince, are in leadership positions at Emerdata. The Russo brothers are producing an upcoming film on Cambridge Analytica. In 2019 the Federal Trade Commission filed an administrative complaint against Cambridge Analytica for misuse of data. In 2020, the British Information Commissioner's Office closed a three-year inquiry into the company, concluded that Cambridge Analytica was "not involved" in the 2016 Brexit referendum and found no additional evidence for Russia's alleged interference during the campaign. US sensitive polling and election data, however, were passed to Russian Intelligence via a Cambridge Analytica contractor Sam Patten, Trump campaign manager Paul Manafort, and Russian agent Konstantin Kilimnik, who was indicted during the affair. Publicly, parent company SCL Group called itself a "global election management agency", Politico reported it was known for involvement "in military disinformation campaigns to social media branding and voter targeting". SCL gained work on a large number of campaigns for the US and UK governments' war on terror advancing their model of behavioral conflict during the 2000s. SCL's involvement in the political world has been primarily in the developing world where it has been used by the military and politicians to study and manipulate public opinion and political will. Slate writer Sharon Weinberger compared one of SCL's hypothetical test scenarios to fomenting a coup. Among the investors in Cambridge Analytica were some of the Conservative Party's largest donors such as billionaire Vincent Tchenguiz, former Conservative minister Jonathan Marland, Baron Marland, Roger Gabb, the family of American hedge fund manager Robert Mercer, and Steve Bannon. A minimum of 15 million dollars has been invested into the company by Mercer, according to The New York Times. Bannon's stake in the company was estimated at 1 to 5 million dollars, but he divested his holdings in April 2017 as required by his role as White House Chief Strategist. In March 2018, Jennifer Mercer and Rebekah Mercer became directors of Emerdata limited. In March 2018 it became public by Christopher Wylie, that Cambridge Analytica's first activities were founded on a data set, which its parent company SCL bought 2014 from a company named Global Science Research founded by Aleksandr Kogan and his team present across the world who worked as a psychologist at Cambridge. During Boris Johnson's tenure as foreign secretary, the Foreign Office sought advice from Cambridge Analytica and Boris Johnson had a meeting with Alexander N

  Read more →
• 

  NYSERNet

  NYSERNet, Inc. (New York State Education and Research Network), is a non-profit Internet service provider in New York State. It mainly provides Internet access to universities, colleges, museums, health care facilities, primary and secondary schools, and research institutions. == History == NYSERNet was founded in 1986 in Troy, New York. Its founders compared NYSERNet's network with the Erie Canal and considered it the next step in two centuries to draw the country together. NYSERNet's network reaches from Buffalo to New York City. Completed in 1987, it was the first statewide regional IP network in the United States.[1] Initial speed of 56 kbps was upgraded to T1 in 1989 and T3 in 1994. It was the original assignee of AS174 according to RFC1117. This ASN is used today by Cogent Communications for their global network.

  Read more →
• 

  Content format

  A content format is an encoded format for converting a specific type of data to displayable information. Content formats are used in recording and transmission to prepare data for observation or interpretation. This includes both analog and digitized content. Content formats may be recorded and read by either natural or manufactured tools and mechanisms. In addition to converting data to information, a content format may include the encryption and/or scrambling of that information. Multiple content formats may be contained within a single section of a storage medium (e.g. track, disk sector, computer file, document, page, column) or transmitted via a single channel (e.g. wire, carrier wave) of a transmission medium. With multimedia, multiple tracks containing multiple content formats are presented simultaneously. Content formats may either be recorded in secondary signal processing methods such as a software container format (e.g. digital audio, digital video) or recorded in the primary format (e.g. spectrogram, pictogram). Observable data is often known as raw data, or raw content. A primary raw content format may be directly observable (e.g. image, sound, motion, smell, sensation) or physical data which only requires hardware to display it, such as a phonographic needle and diaphragm or a projector lamp and magnifying glass. The following are examples of some common content formats and content format categories (covering: sensory experience, model, and language used for encoding information):

  Read more →
• 

  Cross-validation (statistics)

  Cross-validation, sometimes called rotation estimation or out-of-sample testing, is any of various similar model validation techniques for assessing how the results of a statistical analysis will generalize to an independent data set. Cross-validation includes resampling and sample splitting methods that use different portions of the data to test and train a model on different iterations. It is often used in settings where the goal is prediction, and one wants to estimate how accurately a predictive model will perform in practice. It can also be used to assess the quality of a fitted model and the stability of its parameters. In a prediction problem, a model is usually given a dataset of known data on which training is run (training dataset), and a dataset of unknown data (or first seen data) against which the model is tested (called the validation dataset or testing set). The goal of cross-validation is to test the model's ability to predict new data that was not used in estimating it, in order to flag problems like overfitting or selection bias and to give an insight on how the model will generalize to an independent dataset (i.e., an unknown dataset, for instance from a real problem). One round of cross-validation involves partitioning a sample of data into complementary subsets, performing the analysis on one subset (called the training set), and validating the analysis on the other subset (called the validation set or testing set). To reduce variability, in most methods multiple rounds of cross-validation are performed using different partitions, and the validation results are combined (e.g. averaged) over the rounds to give an estimate of the model's predictive performance. In summary, cross-validation combines (averages) measures of fitness in prediction to derive a more accurate estimate of model prediction performance. == Motivation == Assume a model with one or more unknown parameters, and a data set to which the model can be fit (the training data set). The fitting process optimizes the model parameters to make the model fit the training data as well as possible. If an independent sample of validation data is taken from the same population as the training data, it will generally turn out that the model does not fit the validation data as well as it fits the training data. The size of this difference is likely to be large especially when the size of the training data set is small, or when the number of parameters in the model is large. Cross-validation is a way to estimate the size of this effect. === Example: linear regression === In linear regression, there exist real response values y 1 , … , y n {\textstyle y_{1},\ldots ,y_{n}} , and n p-dimensional vector covariates x1, ..., xn. The components of the vector xi are denoted xi1, ..., xip. If least squares is used to fit a function in the form of a hyperplane ŷ = a + βTx to the data (xi, yi) 1 ≤ i ≤ n, then the fit can be assessed using the mean squared error (MSE). The MSE for given estimated parameter values a and β on the training set (xi, yi) 1 ≤ i ≤ n is defined as: MSE = 1 n ∑ i = 1 n ( y i − y ^ i ) 2 = 1 n ∑ i = 1 n ( y i − a − β T x i ) 2 = 1 n ∑ i = 1 n ( y i − a − β 1 x i 1 − ⋯ − β p x i p ) 2 {\displaystyle {\begin{aligned}{\text{MSE}}&={\frac {1}{n}}\sum _{i=1}^{n}(y_{i}-{\hat {y}}_{i})^{2}={\frac {1}{n}}\sum _{i=1}^{n}(y_{i}-a-{\boldsymbol {\beta }}^{T}\mathbf {x} _{i})^{2}\\&={\frac {1}{n}}\sum _{i=1}^{n}(y_{i}-a-\beta _{1}x_{i1}-\dots -\beta _{p}x_{ip})^{2}\end{aligned}}} If the model is correctly specified, it can be shown under mild assumptions that the expected value of the MSE for the training set is (n − p − 1)/(n + p + 1) < 1 times the expected value of the MSE for the validation set (the expected value is taken over the distribution of training sets). Thus, a fitted model and computed MSE on the training set will result in an optimistically biased assessment of how well the model will fit an independent data set. This biased estimate is called the in-sample estimate of the fit, whereas the cross-validation estimate is an out-of-sample estimate. Since in linear regression it is possible to directly compute the factor (n − p − 1)/(n + p + 1) by which the training MSE underestimates the validation MSE under the assumption that the model specification is valid, cross-validation can be used for checking whether the model has been overfitted, in which case the MSE in the validation set will substantially exceed its anticipated value. (Cross-validation in the context of linear regression is also useful in that it can be used to select an optimally regularized cost function.) === General case === In most other regression procedures (e.g. logistic regression), there is no simple formula to compute the expected out-of-sample fit. Cross-validation is, thus, a generally applicable way to predict the performance of a model on unavailable data using numerical computation in place of theoretical analysis. == Types == Two types of cross-validation can be distinguished: exhaustive and non-exhaustive cross-validation. === Exhaustive cross-validation === Exhaustive cross-validation methods are cross-validation methods which learn and test on all possible ways to divide the original sample into a training and a validation set. ==== Leave-p-out cross-validation ==== Leave-p-out cross-validation (LpO CV) involves using p observations as the validation set and the remaining observations as the training set. This is repeated on all ways to cut the original sample on a validation set of p observations and a training set. LpO cross-validation require training and validating the model C p n {\displaystyle C_{p}^{n}} times, where n is the number of observations in the original sample, and where C p n {\displaystyle C_{p}^{n}} is the binomial coefficient. For p > 1 and for even moderately large n, LpO CV can become computationally infeasible. For example, with n = 100 and p = 30, C 30 100 ≈ 3 × 10 25 . {\displaystyle C_{30}^{100}\approx 3\times 10^{25}.} A variant of LpO cross-validation with p=2 known as leave-pair-out cross-validation has been recommended as a nearly unbiased method for estimating the area under ROC curve of binary classifiers. ==== Leave-one-out cross-validation ==== Leave-one-out cross-validation (LOOCV) is a particular case of leave-p-out cross-validation with p = 1. The process looks similar to jackknife; however, with cross-validation one computes a statistic on the left-out sample(s), while with jackknifing one computes a statistic from the kept samples only. LOO cross-validation requires less computation time than LpO cross-validation because there are only C 1 n = n {\displaystyle C_{1}^{n}=n} passes rather than C p n {\displaystyle C_{p}^{n}} . However, n {\displaystyle n} passes may still require quite a large computation time, in which case other approaches such as k-fold cross validation may be more appropriate. Pseudo-code algorithm: Input: x, {vector of length N with x-values of incoming points} y, {vector of length N with y-values of the expected result} interpolate( x_in, y_in, x_out ), { returns the estimation for point x_out after the model is trained with x_in-y_in pairs} Output: err, {estimate for the prediction error} Steps: err ← 0 for i ← 1, ..., N do // define the cross-validation subsets x_in ← (x[1], ..., x[i − 1], x[i + 1], ..., x[N]) y_in ← (y[1], ..., y[i − 1], y[i + 1], ..., y[N]) x_out ← x[i] y_out ← interpolate(x_in, y_in, x_out) err ← err + (y[i] − y_out)^2 end for err ← err/N === Non-exhaustive cross-validation === Non-exhaustive cross validation methods do not compute all ways of splitting the original sample. These methods are approximations of leave-p-out cross-validation. ==== k-fold cross-validation ==== In k-fold cross-validation, the original sample is randomly partitioned into k equal sized subsamples, often referred to as "folds". Of the k subsamples, a single subsample is retained as the validation data for testing the model, and the remaining k − 1 subsamples are used as training data. The cross-validation process is then repeated k times, with each of the k subsamples used exactly once as the validation data. The k results can then be averaged to produce a single estimation. The advantage of this method over repeated random sub-sampling (see below) is that all observations are used for both training and validation, and each observation is used for validation exactly once. 10-fold cross-validation is commonly used, but in general k remains an unfixed parameter. For example, setting k = 2 results in 2-fold cross-validation. In 2-fold cross-validation, the dataset is randomly shuffled into two sets d0 and d1, so that both sets are equal size (this is usually implemented by shuffling the data array and then splitting it in two). We then train on d0 and validate on d1, followed by training on d1 and validating on d0. When k = n (the number of observations), k-fold cross-validation is equivalent to leave-one-out cr

  Read more →
• 

  Virtual influencer

  A virtual influencer, sometimes described as a virtual persona or virtual model, is a computer-generated fictional character that can be used for a variety of marketing-related purposes, but most frequently for social media marketing, in lieu of online human "influencers". Most virtual influencers are designed using computer graphics and motion capture technology to resemble real people in realistic situations. Common derivatives of virtual influencers include VTubers, which broadly refer to online entertainers and YouTubers who represent themselves using virtual avatars instead of their physical selves. == History == Virtual influencers are fundamentally synonymous with virtual idols, which originate from Japan's anime and Japanese idol culture that dates back to the 1980s. The first virtual idol created was Lynn Minmay, a fictional singer and main character of the anime television series Super Dimension Fortress Macross (1982) and the animated film adaptation Macross: Do You Remember Love? (1984). Minmay's success led to the production of more Japanese virtual idols, such as EVE from the Japanese cyberpunk anime Megazone 23 (1985), and Sharon Apple in Macross Plus (1994). Virtual idols were not always well received – in 1995, Japanese talent agency Horipro created Kyoko Date, which was inspired by the Macross franchise and dating sim games such as Tokimeki Memorial (1994). Date failed to gain commercial success despite drawing headlines for her debut as a CGI idol, largely due to technical limitations leading to issues such as unnatural movements, an issue also known as the uncanny valley. Since their inception, many virtual idols created have achieved continual success, with notable names including the Vocaloid singer Hatsune Miku, and the VTuber Kizuna AI. Technological advancements have also enabled production teams to use artificial intelligence and advanced techniques to customize the personalities and behavior of virtual idols. Due to modern-day advancements in technology, many virtual idols have held real-life tours and events. Notable ones include Hatsune Miku's titular tour Miku Expo and Hololive's concerts with many of their idols from their English, Japanese and Indonesian branches. Some notable events including virtual singers and influencers have included: Hatsune Miku opening for Lady Gaga in 2014 and Hoshimachi Suisei's concerts at the famous Budokan venue in Japan and her addition to the Forbes Japan list of '30 Under 30' individuals who are changing the world in their respective fields. == Benefits and criticism == From a branding perspective, virtual influencers are perceived to be much less likely to be mired in scandals. In China, celebrities caught in bad publicity such as singer Wang Leehom and entertainer Kris Wu have heightened the appeal of virtual influencers, since their existence relies entirely on computer-generated imagery and they are therefore unlikely to cause any damage to a brand's image by association. Some studies have also suggested that Generation Z consumers have a unique appetite for virtual idols and influencers, since they grew up in the age of the internet. Studies also show that human-like appearance of virtual influencers show higher message credibility than anime-like virtual influencers. Scholars and commentators have also questioned the ethics and cultural impact of virtual influencers, arguing that computer-generated personas can entrench unrealistic beauty standards while diffusing accountability for labor, identity, and consent. Business and marketing analysts have also warned that disclosure and governance remain inconsistent, recommending clearer guardrails and transparency when brands deploy synthetic spokespeople. In 2025, reporting highlighted concerns that AI-driven "virtual humans" could displace human creators and sales workers, intensifying debates over the future of creative labor and authenticity online. == Notable examples == === Virtual bands === Eternity - A South Korean virtual idol group formed by Pulse9. Gorillaz - A virtual band formed in 1998. K/DA - A virtual K-pop girl group created as part of the League of Legends video game franchise. MAVE: - A South Korean virtual girl group formed in 2023 by Metaverse Entertainment. Pentakill - A virtual heavy metal band created as part of the League of Legends video game franchise. Plave (band) - A South Korean virtual boy band formed by VLast. Squid Sisters and Off the Hook - Two virtual pop idol duos as part of the Splatoon series. Studio Killers - A Finnish-Danish-British virtual band formed in 2011. === Vocaloids === Hatsune Miku (modeled after Saki Fujita) Kagamine Rin/Len (modeled after Asami Shimoda) Megurine Luka (modeled after Yū Asakawa) Meiko (modeled after Meiko Haigō) Kaito (modeled after Naoto Fūga) === VTubers === Kano Kizuna AI Neuro-sama VShojo Ironmouse Projekt Melody Nijisanji Hololive Akai Haato Gawr Gura Hoshimachi Suisei Natsuiro Matsuri === Other examples === Ami Yamato Crazy Frog FN Meka IA Kuki AI Kyoko Date Kyra Miquela Naevis Shudu Gram

  Read more →
• 

  Service Assurance Agent

  IP SLA (Internet Protocol Service Level Agreement) is an active computer network measurement technology that was initially developed by Cisco Systems. IP SLA was previously known as Service Assurance Agent (SAA) or Response Time Reporter (RTR). IP SLA is used to track network performance like latency, ping response, and jitter, it also helps to provide service quality. == Functions == Routers and switches enabled with IP SLA perform periodic network tests or measurements such as Hypertext Transfer Protocol (HTTP) GET File Transfer Protocol (FTP) downloads Domain Name System (DNS) lookups User Datagram Protocol (UDP) echo, for VoIP jitter and mean opinion score (MOS) Data-Link Switching (DLSw) (Systems Network Architecture (SNA) tunneling protocol) Dynamic Host Configuration Protocol (DHCP) lease requests Transmission Control Protocol (TCP) connect Internet Control Message Protocol (ICMP) echo (remote ping) The exact number and types of available measurements depends on the IOS version. IP SLA is very widely used in service provider networks to generate time-based performance data. It is also used together with Simple Network Management Protocol (SNMP) and NetFlow, which generate volume-based data. == Usage considerations == For IP SLA tests, devices with IP SLA support are required. IP SLA is supported on Cisco routers and switches since IOS version 12.1. Other vendors like Juniper Networks or Enterasys Networks support IP SLA on some of their devices. IP SLA tests and data collection can be configured either via a console (command-line interface) or via SNMP. When using SNMP, both read and write community strings are needed. The IP SLA voice quality feature was added starting with IOS version 12.3(4)T. All versions after this, including 12.4 mainline, contain the MOS and ICPIF voice quality calculation for the UDP jitter measurement.

  Read more →