AI Chatbot That Sends Pictures

AI Chatbot That Sends Pictures — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

International Conference on Language Resources and Evaluation

The International Conference on Language Resources and Evaluation is an international conference organised by the ELRA Language Resources Association every other year (on even years) with the support of institutions and organisations involved in Natural language processing. The series of LREC conferences was launched in Granada in 1998. == History of conferences == The survey of the LREC conferences over the period 1998-2013 was presented during the 2014 conference in Reykjavik as a closing session. It appears that the number of papers and signatures is increasing over time. The average number of authors per paper is higher as well. The percentage of new authors is between 68% and 78%. The distribution between male (65%) and female (35%) authors is stable over time. The most frequent technical term is "annotation", then comes "part-of-speech". == The LRE Map == The LRE Map was introduced at LREC 2010 and is now a regular feature of the LREC submission process for both the conference papers and the workshop papers. At the submission stage, the authors are asked to provide some basic information about all the resources (in a broad sense, i.e. including tools, standards and evaluation packages), either used or created, described in their papers. All these descriptors are then gathered in a global matrix called the LRE Map. This feature has been extended to several other conferences.
Read more →
Dependency network (graphical model)

Dependency networks (DNs) are graphical models, similar to Markov networks, wherein each vertex (node) corresponds to a random variable and each edge captures dependencies among variables. Unlike Bayesian networks, DNs may contain cycles. Each node is associated to a conditional probability table, which determines the realization of the random variable given its parents. == Markov blanket == In a Bayesian network, the Markov blanket of a node is the set of parents and children of that node, together with the children's parents. The values of the parents and children of a node evidently give information about that node. However, its children's parents also have to be included in the Markov blanket, because they can be used to explain away the node in question. In a Markov random field, the Markov blanket for a node is simply its adjacent (or neighboring) nodes. In a dependency network, the Markov blanket for a node is simply the set of its parents. == Dependency network versus Bayesian networks == Dependency networks have advantages and disadvantages with respect to Bayesian networks. In particular, they are easier to parameterize from data, as there are efficient algorithms for learning both the structure and probabilities of a dependency network from data. Such algorithms are not available for Bayesian networks, for which the problem of determining the optimal structure is NP-hard. Nonetheless, a dependency network may be more difficult to construct using a knowledge-based approach driven by expert-knowledge. == Dependency networks versus Markov networks == Consistent dependency networks and Markov networks have the same representational power. Nonetheless, it is possible to construct non-consistent dependency networks, i.e., dependency networks for which there is no compatible valid joint probability distribution. Markov networks, in contrast, are always consistent. == Definition == A consistent dependency network for a set of random variables X = ( X 1 , … , X n ) {\textstyle \mathbf {X} =(X_{1},\ldots ,X_{n})} with joint distribution p ( x ) {\displaystyle p(\mathbf {x} )} is a pair ( G , P ) {\displaystyle (G,P)} where G {\displaystyle G} is a cyclic directed graph, where each of its nodes corresponds to a variable in X {\displaystyle \mathbf {X} } , and P {\displaystyle P} is a set of conditional probability distributions. The parents of node X i {\displaystyle X_{i}} , denoted P a i {\displaystyle \mathbf {Pa_{i}} } , correspond to those variables P a i ⊆ ( X 1 , … , X i − 1 , X i + 1 , … , X n ) {\displaystyle \mathbf {Pa_{i}} \subseteq (X_{1},\ldots ,X_{i-1},X_{i+1},\ldots ,X_{n})} that satisfy the following independence relationships p ( x i ∣ p a i ) = p ( x i ∣ x 1 , … , x i − 1 , x i + 1 , … , x n ) = p ( x i ∣ x − x i ) . {\displaystyle p(x_{i}\mid \mathbf {pa_{i}} )=p(x_{i}\mid x_{1},\ldots ,x_{i-1},x_{i+1},\ldots ,x_{n})=p(x_{i}\mid \mathbf {x} -{x_{i}}).} The dependency network is consistent in the sense that each local distribution can be obtained from the joint distribution p ( x ) {\displaystyle p(\mathbf {x} )} . Dependency networks learned using large data sets with large sample sizes will almost always be consistent. A non-consistent network is a network for which there is no joint probability distribution compatible with the pair ( G , P ) {\displaystyle (G,P)} . In that case, there is no joint probability distribution that satisfies the independence relationships subsumed by that pair. == Structure and parameters learning == Two important tasks in a dependency network are to learn its structure and probabilities from data. Essentially, the learning algorithm consists of independently performing a probabilistic regression or classification for each variable in the domain. It comes from observation that the local distribution for variable X i {\displaystyle X_{i}} in a dependency network is the conditional distribution p ( x i | x − x i ) {\displaystyle p(x_{i}|\mathbf {x} -{x_{i}})} , which can be estimated by any number of classification or regression techniques, such as methods using a probabilistic decision tree, a neural network or a probabilistic support-vector machine. Hence, for each variable X i {\displaystyle X_{i}} in domain X {\displaystyle X} , we independently estimate its local distribution from data using a classification algorithm, even though it is a distinct method for each variable. Here, we will briefly show how probabilistic decision trees are used to estimate the local distributions. For each variable X i {\displaystyle X_{i}} in X {\displaystyle \mathbf {X} } , a probabilistic decision tree is learned where X i {\displaystyle X_{i}} is the target variable and X − X i {\displaystyle \mathbf {X} -X_{i}} are the input variables. To learn a decision tree structure for X i {\displaystyle X_{i}} , the search algorithm begins with a singleton root node without children. Then, each leaf node in the tree is replaced with a binary split on some variable X j {\displaystyle X_{j}} in X − X i {\displaystyle \mathbf {X} -X_{i}} , until no more replacements increase the score of the tree. == Probabilistic Inference == A probabilistic inference is the task in which we wish to answer probabilistic queries of the form p ( y ∣ z ) {\displaystyle p(\mathbf {y\mid z} )} , given a graphical model for X {\displaystyle \mathbf {X} } , where Y {\displaystyle \mathbf {Y} } (the 'target' variables) Z {\displaystyle \mathbf {Z} } (the 'input' variables) are disjoint subsets of X {\displaystyle \mathbf {X} } . One of the alternatives for performing probabilistic inference is using Gibbs sampling. A naive approach for this uses an ordered Gibbs sampler, an important difficulty of which is that if either p ( y ∣ z ) {\displaystyle p(\mathbf {y\mid z} )} or p ( z ) {\displaystyle p(\mathbf {z} )} is small, then many iterations are required for an accurate probability estimate. Another approach for estimating p ( y ∣ z ) {\displaystyle p(\mathbf {y\mid z} )} when p ( z ) {\displaystyle p(\mathbf {z} )} is small is to use modified ordered Gibbs sampler, where Z = z {\displaystyle \mathbf {Z=z} } is fixed during Gibbs sampling. It may also happen that y {\displaystyle \mathbf {y} } is rare, e.g. when Y {\displaystyle \mathbf {Y} } has many variables. So, the law of total probability along with the independencies encoded in a dependency network can be used to decompose the inference task into a set of inference tasks on single variables. This approach comes with the advantage that some terms may be obtained by direct lookup, thereby avoiding some Gibbs sampling. You can see below an algorithm that can be used for obtain p ( y | z ) {\displaystyle p(\mathbf {y|z} )} for a particular instance of y ∈ Y {\displaystyle \mathbf {y} \in \mathbf {Y} } and z ∈ Z {\displaystyle \mathbf {z} \in \mathbf {Z} } , where Y {\displaystyle \mathbf {Y} } and Z {\displaystyle \mathbf {Z} } are disjoint subsets. Algorithm 1: U := Y {\displaystyle \mathbf {U:=Y} } ( the unprocessed variables ) P := Z {\displaystyle \mathbf {P:=Z} } ( the processed and conditioning variables ) p := z {\displaystyle \mathbf {p:=z} } ( the values for P {\displaystyle \mathbf {P} } ) While U ≠ ∅ {\displaystyle \mathbf {U} \neq \emptyset } : Choose X i ∈ U {\displaystyle X_{i}\in \mathbf {U} } such that X i {\displaystyle X_{i}} has no more parents in U {\displaystyle U} than any variable in U {\displaystyle U} If all the parents of X {\displaystyle X} are in P {\displaystyle \mathbf {P} } p ( x i | p ) := p ( x i | p a i ) {\displaystyle p(x_{i}|\mathbf {p} ):=p(x_{i}|\mathbf {pa_{i}} )} Else Use a modified ordered Gibbs sampler to determine p ( x i | p ) {\displaystyle p(x_{i}|\mathbf {p} )} U := U − X i {\displaystyle \mathbf {U:=U} -X_{i}} P := P + X i {\displaystyle \mathbf {P:=P} +X_{i}} p := p + x i {\displaystyle \mathbf {p:=p} +x_{i}} Returns the product of the conditionals p ( x i | p ) {\displaystyle p(x_{i}|\mathbf {p} )} == Applications == In addition to the applications to probabilistic inference, the following applications are in the category of Collaborative Filtering (CF), which is the task of predicting preferences. Dependency networks are a natural model class on which to base CF predictions, once an algorithm for this task only needs estimation of p ( x i = 1 | x − x i = 0 ) {\displaystyle p(x_{i}=1|\mathbf {x} -{x_{i}}=0)} to produce recommendations. In particular, these estimates may be obtained by a direct lookup in a dependency network. Predicting what movies a person will like based on his or her ratings of movies seen; Predicting what web pages a person will access based on his or her history on the site; Predicting what news stories a person is interested in based on other stories he or she read; Predicting what product a person will buy based on products he or she has already purchased and/or dropped into his or her shopping basket. Another class of useful applications for dependency networks is related to data visualization, that is
Read more →
Known-item search

Known-item search is a specialization of information exploration which represents the activities carried out by searchers who have a particular item in mind. In the context of library catalogs, known‐item search means a search for an item for which the author or title is known. Although the concept of known-item search originated in library science, it is now applied in the context of web search and other online search activities. Known-item search is distinguished from exploratory search, in which a searcher is unfamiliar with the domain of their search goal, unsure about the ways to achieve their goal, and/or unsure about what their goal is.
Read more →
WCF Data Services

WCF Data Services (formerly ADO.NET Data Services, codename "Astoria") is a platform for what Microsoft calls Data Services. It is actually a combination of the runtime and a web service through which the services are exposed. It also includes the Data Services Toolkit which lets Astoria Data Services be created from within ASP.NET itself. The Astoria project was announced at MIX 2007, and the first developer preview was made available on April 30, 2007. The first CTP was made available as a part of the ASP.NET 3.5 Extensions Preview. The final version was released as part of Service Pack 1 of the .NET Framework 3.5 on August 11, 2008. The name change from ADO.NET Data Services to WCF data Services was announced at the 2009 PDC. == Overview == WCF Data Services exposes data, represented as Entity Data Model (EDM) objects, via web services accessed over HTTP. The data can be addressed using a REST-like URI. The data service, when accessed via the HTTP GET method with such a URI, will return the data. The web service can be configured to return the data in either plain XML, JSON or RDF+XML. In the initial release, formats like RSS and ATOM are not supported, though they may be in the future. In addition, using other HTTP methods like PUT, POST or DELETE, the data can be updated as well. POST can be used to create new entities, PUT for updating an entity, and DELETE for deleting an entity. == Description == Windows Communication Foundation (WCF) comes to the rescue when we find ourselves not able to achieve what we want to achieve using web services, i.e., other protocols support and even duplex communication. With WCF, we can define our service once and then configure it in such a way that it can be used via HTTP, TCP, IPC, and even Message Queues. We can consume Web Services using server side scripts (ASP.NET), JavaScript Object Notations (JSON), and even REST (Representational State Transfer). Understanding the basics When we say that a WCF service can be used to communicate using different protocols and from different kinds of applications, we will need to understand how we can achieve this. If we want to use a WCF service from an application, then we have three major questions: 1.Where is the WCF service located from a client's perspective? 2.How can a client access the service, i.e., protocols and message formats? 3.What is the functionality that a service is providing to the clients? Once we have the answer to these three questions, then creating and consuming the WCF service will be a lot easier for us. The WCF service has the concept of endpoints. A WCF service provides endpoints which client applications can use to communicate with the WCF service. The answer to these above questions is what is known as the ABC of WCF services and in fact are the main components of a WCF service. So let's tackle each question one by one. Address: Like a webservice, a WCF service also provides a URI which can be used by clients to get to the WCF service. This URI is called as the Address of the WCF service. This will solve the first problem of "where to locate the WCF service?" for us. Binding: Once we are able to locate the WCF service, one should think about how to communicate with the service (protocol wise). The binding is what defines how the WCF service handles the communication. It could also define other communication parameters like message encoding, etc. This will solve the second problem of "how to communicate with the WCF service?" for us. Contract: Now the only question one is left with is about the functionalities that a WCF service provides. The contract is what defines the public data and interfaces that WCF service provides to the clients. The URIs representing the data will contain the physical location of the service, as well as the service name. It will also need to specify an EDM Entity-Set or a specific entity instance, as in respectively http://dataserver/service.svc/MusicCollection or http://dataserver/service.svc/MusicCollection[SomeArtist] The former will list all entities in the Collection set whereas the latter will list only for the entity which is indexed by SomeArtist. The URIs can also specify a traversal of a relationship in the Entity Data Model. For example, http://dataserver/service.svc/MusicCollection[SomeSong]/Genre traverses the relationship Genre (in SQL parlance, joins with the Genre table) and retrieves all instances of Genre that are associated with the entity SomeSong. Simple predicates can also be specified in the URI, like http://dataserver/service.svc/MusicCollection[SomeArtist]/ReleaseDate[Year eq 2006] will fetch the items that are indexed by SomeArtist and had their release in 2006. Filtering and partition information can also be encoded in the URL as http://dataserver/service.svc/MusicCollection?$orderby=ReleaseDate&$skip=100&$top=50 Although the presence of skip and top keywords indicates paging support, in Data Services version 1 there is no method of determining the number of records available and thus impossible to determine how many pages there may be. The OData 2.0 spec adds support for the $count path segment (to return just a count of entities) and $inlineCount (to retrieve a page worth of entities and a total count without a separate round-trip....).
Read more →
INDECT

INDECT is a research project in the area of intelligent security systems performed by several European universities since 2009 and funded by the European Union. The purpose of the project is to involve European scientists and researchers in the development of solutions to and tools for automatic threat detection through e.g. processing of CCTV camera data streams, standardization of video sequence quality for user applications, threat detection in computer networks as well as data and privacy protection. The area of research, applied methods, and techniques are described in the public deliverables which are available to the public on the project's website. Practically, all information related to the research is public. Only documents that comprise information related to financial data or information that could negatively influence the competitiveness and law enforcement capabilities of parties involved in the project are not published. This follows regulations and practices applied in EU research projects. == Application and target users == The main end-user of INDECT solutions are police forces and security services. The principle of operation of the project is detecting threats and identifying sources of threats, without monitoring and searching for particular citizens or groups of citizens. Then, the system operator (i.e. police officer) decides whether an intervention of services responsible for public security are required or not. Further investigation eventually leading to persons related to threats is performed, preserving the presumption of innocence, based on existing procedures already used by police services and prosecutors. As it can be found in the project deliverables, INDECT does not involve storage of personal data (such as names, addresses, identity document numbers, etc.). A similar, behavior-based surveillance program was SAMURAI (Suspicious and Abnormal behavior Monitoring Using a netwoRk of cAmeras & sensors for sItuation awareness enhancement). == Expected results == The main expected results of the INDECT project are: Trial of intelligent analysis of video and audio data for threat detection in urban environments Creation of tools and technology for privacy and data protection during storage and transmission of information using quantum cryptography and new methods of digital watermarking Performing computer-aided detection of threats and targeted crimes in Internet resources with privacy-protecting solutions Construction of a search engine for rapid semantic search based on watermarking of content related to child pornography and human organ trafficking Implementation of a distributed computer system that is capable of effective intelligent processing == Controversy == Some media and other sources accuse INDECT of privacy abuse, collecting personal data, and keeping information from the public. Consequently, these issues have been commented and discussed by some Members of the European Parliament. As seen in the project's documentation, INDECT does not involve mobile phone tracking or call interception. The rumors about testing INDECT during 2012 UEFA European Football Championship also turned out to be false. The mid-term review of the Seventh Framework Programme to the European Parliament strongly urges the European Commission to immediately make all documents available and to define a clear and strict mandate for the research goal, the application, and the end users of INDECT, and stresses a thorough investigation of the possible impact on fundamental rights. Nevertheless, according to Mr. Paweł Kowal, MEP, the project had the ethical review on 15 March 2011 in Brussels with the participation of ethics experts from Austria, France, Netherlands, Germany and Great Britain.
Read more →
AI-assisted reverse engineering

AI-assisted reverse engineering (AIARE) is a branch of computer science that leverages artificial intelligence (AI), notably machine learning (ML) strategies, to augment and automate the process of reverse engineering. The latter involves breaking down a product, system, or process to comprehend its structure, design, and functionality. AIARE was primarily introduced in the early years of the 21st century, witnessing substantial advancements from the mid-2010s onwards. == Overview == Conventionally, reverse engineering is conducted by specialists who dismantle a system to grasp its working principles, often for the purposes of reproduction, modification, enhancement of compatibility, or forensic examination. This method, while efficient, can be laborious and time-intensive, particularly when dealing with intricate software or hardware systems. AIARE integrates machine learning algorithms to either partially automate or augment this process. It is capable of detecting patterns, relationships, structures, and potential vulnerabilities within the analyzed system, frequently surpassing human experts in speed and accuracy. This has rendered AIARE a critical tool in numerous fields, including cybersecurity, software development, and hardware design and analysis. == Techniques == AIARE encompasses several AI methodologies: === Supervised learning === Supervised learning employs tagged data to train models to recognize system components, their operations, and their interconnections. This method is particularly helpful in software analysis to discover vulnerabilities or enhance compatibility. === Unsupervised learning === Unsupervised learning is utilized to detect concealed patterns and structures in untagged data. It proves beneficial in comprehending complex systems where there's no evident labeling or mapping of components. === Reinforcement learning === Reinforcement learning is employed to build models that progressively refine their system understanding through a process of trial and error. This method is often implemented when deciphering a system's functionality under various circumstances or configurations. === Deep learning === Deep learning is employed for analysis of high-dimensional data. For instance, deep learning techniques can aid in examining the layout and connections of integrated circuits (ICs), substantially reducing the manual effort required for reverse engineering. == Benefits == === Usable Security === AIARE expands usable security as reverse engineering is traditionally slow and highly specialized as it produces dense, low-level information (usually in Assembly or C) when using tools like Ghidra. The use of multiple different methods to interface with models today (such as through chat bots like ChatGPT) greatly reduces the barrier to entry by providing a clear way to interact with the user and even providing meaningful decompiled source code. In addition, either done automatically or through prompt engineering, a model is capable of producing a high-level summary and explanation of its reverse engineering efforts in human-readable form that doesn't require much knowledge on code. === Speedup === AIARE is capable of processing data much faster than humans, providing a boost in speed when analyzing said data. In the context of computer security, this can greatly speed up incident management or response and malware detection as AIARE can be automated to drastically reduce the manual effort usually associated with reverse engineering. == Limitations == In an effort to improve readability for reverse engineering, AI-generated code may introduce erroneous bugs not present in the source. This compromises the correctness of the code if not carefully validated and will throw off reverse engineering efforts. Additionally, AIARE's weakness in zero-shot prompting makes gathering accurate data without reference data in the prompt more inconsistent, thus requiring a user to provide some quality data of their own that hurts its usability.
Read more →
Token-based replay

Token-based replay technique is a conformance checking algorithm that checks how well a process conforms with its model by replaying each trace on the model (in Petri net notation ). Using the four counters produced tokens, consumed tokens, missing tokens, and remaining tokens, it records the situations where a transition is forced to fire and the remaining tokens after the replay ends. Based on the count at each counter, we can compute the fitness value between the trace and the model. == The algorithm == Source: The token-replay technique uses four counters to keep track of a trace during the replaying: p: Produced tokens c: Consumed tokens m: Missing tokens (consumed while not there) r: Remaining tokens (produced but not consumed) Invariants: At any time: p + m ≥ c ≥ m {\displaystyle p+m\geq c\geq m} At the end: r = p + m − c {\displaystyle r=p+m-c} At the beginning, a token is produced for the source place (p = 1) and at the end, a token is consumed from the sink place (c' = c + 1). When the replay ends, the fitness value can be computed as follows: 1 2 ( 1 − m c ) + 1 2 ( 1 − r p ) {\displaystyle {\frac {1}{2}}(1-{\frac {m}{c}})+{\frac {1}{2}}(1-{\frac {r}{p}})} == Example == Suppose there is a process model in Petri net notation as follows: === Example 1: Replay the trace (a, b, c, d) on the model M === Step 1: A token is initiated. There is one produced token ( p = 1 {\displaystyle p=1} ). Step 2: The activity a {\displaystyle \mathbf {a} } consumes 1 token to be fired and produces 2 tokens ( p = 1 + 2 = 3 {\displaystyle p=1+2=3} and c = 1 {\displaystyle c=1} ). Step 3: The activity b {\displaystyle \mathbf {b} } consumes 1 token and produces 1 token ( p = 3 + 1 = 4 {\displaystyle p=3+1=4} and c = 1 + 1 = 2 {\displaystyle c=1+1=2} ). Step 4: The activity c {\displaystyle \mathbf {c} } consumes 1 token and produces 1 token ( p = 4 + 1 = 5 {\displaystyle p=4+1=5} and c = 2 + 1 = 3 {\displaystyle c=2+1=3} ). Step 5: The activity d {\displaystyle \mathbf {d} } consumes 2 tokens and produces 1 token ( p = 5 + 1 = 6 {\displaystyle p=5+1=6} , c = 3 + 2 = 5 {\displaystyle c=3+2=5} ). Step 6: The token at the end place is consumed ( c = 5 + 1 = 6 {\displaystyle c=5+1=6} ). The trace is complete. The fitness of the trace ( a , b , c , d {\displaystyle \mathbf {a,b,c,d} } ) on the model M {\displaystyle \mathbf {M} } is: 1 2 ( 1 − m c ) + 1 2 ( 1 − r p ) = 1 2 ( 1 − 0 6 ) + 1 2 ( 1 − 0 6 ) = 1 {\displaystyle {\frac {1}{2}}(1-{\frac {m}{c}})+{\frac {1}{2}}(1-{\frac {r}{p}})={\frac {1}{2}}(1-{\frac {0}{6}})+{\frac {1}{2}}(1-{\frac {0}{6}})=1} === Example 2: Replay the trace (a, b, d) on the model M === Step 1: A token is initiated. There is one produced token ( p = 1 {\displaystyle p=1} ). Step 2: The activity a {\displaystyle \mathbf {a} } consumes 1 token to be fired and produces 2 tokens ( p = 1 + 2 = 3 {\displaystyle p=1+2=3} and c = 1 {\displaystyle c=1} ). Step 3: The activity b {\displaystyle \mathbf {b} } consumes 1 token and produces 1 token ( p = 3 + 1 = 4 {\displaystyle p=3+1=4} and c = 1 + 1 = 2 {\displaystyle c=1+1=2} ). Step 4: The activity d {\displaystyle \mathbf {d} } needs to be fired but there are not enough tokens. One artificial token was produced and the missing token counter is increased by one ( m = 1 {\displaystyle m=1} ). The artificial token and the token at place [ b , d ] {\displaystyle [\mathbf {b,d} ]} are consumed ( c = 2 + 2 = 4 {\displaystyle c=2+2=4} ) and one token is produced at place end ( p = 4 + 1 = 5 {\displaystyle p=4+1=5} ). Step 5: The token in the end place is consumed ( c = 4 + 1 = 5 {\displaystyle c=4+1=5} ). The trace is complete. There is one remaining token at place [ a , c ] {\displaystyle [\mathbf {a,c} ]} ( r = 1 {\displaystyle r=1} ). The fitness of the trace ( a , b , d {\displaystyle \mathbf {a,b,d} } ) on the model M {\displaystyle \mathbf {M} } is: 1 2 ( 1 − m c ) + 1 2 ( 1 − r p ) = 1 2 ( 1 − 1 5 ) + 1 2 ( 1 − 1 5 ) = 0.8 {\displaystyle {\frac {1}{2}}(1-{\frac {m}{c}})+{\frac {1}{2}}(1-{\frac {r}{p}})={\frac {1}{2}}(1-{\frac {1}{5}})+{\frac {1}{2}}(1-{\frac {1}{5}})=0.8}
Read more →
Paper data storage

Paper data storage refers to the use of paper as a data storage device. This includes writing, illustrating, and the use of data that can be interpreted by a machine or is the result of the functioning of a machine. A defining feature of paper data storage is the ability of humans to produce it with only simple tools and interpret it visually. Though now mostly obsolete, paper was once an important form of computer data storage as both paper tape and punch cards were a common staple of working with computers before the 1980s. == History == Before paper was used for storing data, it had been used in several applications for storing instructions to specify a machine's operation. The earliest use of paper to store instructions for a machine was the work of Basile Bouchon who, in 1725, used punched paper rolls to control textile looms. This technology was later developed into the wildly successful Jacquard loom. The 19th century saw several other uses of paper for controlling machines. In 1846, telegrams could be prerecorded on punched tape and rapidly transmitted using Alexander Bain's automatic telegraph. Several inventors took the concept of a mechanical organ and used paper to represent the music. In the late 1880s Herman Hollerith invented the recording of data on a medium that could then be read by a machine. Prior uses of machine readable media, above, had been for control (automatons, piano rolls, looms, ...), not data. "After some initial trials with paper tape, he settled on punched cards..." Hollerith's method was used in the 1890 census. Hollerith's company eventually became the core of IBM. Other technologies were also developed that allowed machines to work with marks on paper instead of punched holes. This technology was widely used for tabulating votes and grading standardized tests. Banks used magnetic ink on checks, supporting MICR scanning. In an early electronic computing device, the Atanasoff–Berry Computer, electric sparks were used to singe small holes in paper cards to represent binary data. The altered dielectric constant of the paper at the location of the holes could then be used to read the binary data back into the machine by means of electric sparks of lower voltage than the sparks used to create the holes. This form of paper data storage was never made reliable and was not used in any subsequent machine. == Modern techniques == === 1D barcodes === Barcodes make it possible for any object that was to be sold or transported to have some computer readable information securely attached to it. Universal Product Code barcodes, first used in 1974, are ubiquitous today. Some people recommend a width of at least 3 pixels for each minimum-width gap and each minimum-width bar for 1D barcodes. The density is about 50 bits per linear inch (about 2 bit/mm). === 2D barcodes === 2D barcodes allow to store much more data on paper, up to 2.9 kbyte per barcode. It is recommended to have a width of at least 4 pixels—e.g., a 4 × 4 pixel = 16 pixel module. == Limits == The limits of data storage depend on the technology to write and read such data. The theoretical limits assume a scanner that can perfectly reproduce the printed image at its printing resolution, and a program which can accurately interpret such an image. For example, an 8 in × 10 in (200 mm × 250 mm) 600 dpi black-and-white image contains 3.43 MiB of data, as does a 300 dpi CMYK printed image. A 2,400 ppi True color (24-bit) image contains about 1.29 GiB of information; printing an image maintaining this data would require a printing resolution of about 120,000 dpi in black and white, or 60,000 dpi with CMYK dots.
Read more →
CLEVER score

The CLEVER (Cross Lipschitz Extreme Value for nEtwork Robustness) score is a way of measuring the robustness of an artificial neural network towards adversarial attacks. It was developed by a team at the MIT-IBM Watson AI Lab in IBM Research and first presented at the 2018 International Conference on Learning Representations. It was mentioned and reviewed by Ian Goodfellow as well. It was adopted into an educational game Fool The Bank by Narendra Nath Joshi, Abhishek Bhandwaldar and Casey Dugan
Read more →
Retention period

A retention period (associated with a retention schedule or retention program) is an aspect of records and information management (RIM) and the records life cycle that identifies the duration of time for which the information should be maintained or "retained", irrespective of format (paper, electronic, or other). Retention periods vary with different types of information, based on content and a variety of other factors, including internal organizational need, regulatory requirements for inspection or audit, legal statutes of limitation, involvement in litigation, and taxation and financial reporting needs, as well as other factors as defined by local, regional, state, national, and/or international governing entities. Once an applicable retention period has elapsed for a given type or series of information, and all holds/moratoriums have been released, the information is typically destroyed using an approved and effective destruction method, which renders the information completely and irreversibly unusable via any means. Alternatively, it may be converted from one form to another (e.g. from paper to electronic), depending on the defined retention period per format. Information with historical value beyond its "usable value" may be accessioned to the custody of an archive organization for permanent or extended long-term preservation. == Defensible disposition == Defensible disposition refers to the ability of an identified and applied retention period to effectively provide for the defense of the record, and its eventual destruction or accessioning when scrutinized within a court of law or by other review. It is commonly advised by records and information management (RIM) professionals that any and all retention periods applied to organizational information should be reviewed and approved for use by competent legal counsel, which represents the organization, and is familiar with the specific business needs and legal and regulatory requirements of the organization. Additionally, a practical approach to information assessment/classification, proper documentation of the disposition program, strategic review of disposition policy over time for efficacy are required for proper defensible disposition. == Guidance and education organizations == ARMA International Information and Records Management Society filerskeepers records retention FAQ
Read more →
Materials informatics

Materials informatics is a field of study that applies the principles of informatics and data science to materials science and engineering to improve the understanding, use, selection, development, and discovery of materials. The term "materials informatics" is frequently used interchangeably with "data science", "machine learning", and "artificial intelligence" by the community. This is an emerging field, with a goal to achieve high-speed and robust acquisition, management, analysis, and dissemination of diverse materials data with the goal of greatly reducing the time and risk required to develop, produce, and deploy new materials, which generally takes longer than 20 years. This field of endeavor is not limited to some traditional understandings of the relationship between materials and information. Some more narrow interpretations include combinatorial chemistry, process modeling, materials databases, materials data management, and product life cycle management. Materials informatics is at the convergence of these concepts, but also transcends them and has the potential to achieve greater insights and deeper understanding by applying lessons learned from data gathered on one type of material to others. By gathering appropriate meta data, the value of each individual data point can be greatly expanded. == Databases == Databases are essential for any informatics research and applications. In material informatics many databases exist containing both empirical data obtained experimentally, and theoretical data obtained computationally. Big data that can be used for machine learning is particularly difficult to obtain for experimental data due to the lack of a standard for reporting data and the variability in the experimental environment. This lack of big data has led to growing effort in developing machine learning techniques that utilize data extremely data sets. On the other hand, large uniform database of theoretical density functional theory (DFT) calculations exists. These databases have proven their utility in high-throughput material screening and discovery. Some common DFT databases and high throughput tools are listed below: Databases: MaterialsProject.org, MaterialsWeb.org (University of Florida) HT software: Pymatgen, MPInterfaces, Matminer == Beyond computational methods? == The concept of materials informatics is addressed by the Materials Research Society. For example, materials informatics was the theme of the December 2006 issue of the MRS Bulletin. The issue was guest-edited by John Rodgers of Innovative Materials, Inc., and David Cebon of Cambridge University, who described the "high payoff for developing methodologies that will accelerate the insertion of materials, thereby saving millions of investment dollars." The editors focused on the limited definition of materials informatics as primarily focused on computational methods to process and interpret data. They stated that "specialized informatics tools for data capture, management, analysis, and dissemination" and "advances in computing power, coupled with computational modeling and simulation and materials properties databases" will enable such accelerated insertion of materials. A broader definition of materials informatics goes beyond the use of computational methods to carry out the same experimentation, viewing materials informatics as a framework in which a measurement or computation is one step in an information-based learning process that uses the power of a collective to achieve greater efficiency in exploration. When properly organized, this framework crosses materials boundaries to uncover fundamental knowledge of the basis of physical, mechanical, and engineering properties. == Challenges == While there are many who believe in the future of informatics in the materials development and scaling process, many challenges remain. Hill, et al., write that "Today, the materials community faces serious challenges to bringing about this data-accelerated research paradigm, including diversity of research areas within materials, lack of data standards, and missing incentives for sharing, among others. Nonetheless, the landscape is rapidly changing in ways that should benefit the entire materials research enterprise." This remaining tension between traditional materials development methodologies and the use of more computationally, machine learning, and analytics approaches will likely exist for some time as the materials industry overcomes some of the cultural barriers necessary to fully embrace such new ways of thinking. == Analogy from Biology == The overarching goals of bioinformatics and systems biology may provide a useful analogy. Andrew Murray of Harvard University expresses the hope that such an approach "will save us from the era of "one graduate student, one gene, one PhD". Similarly, the goal of materials informatics is to save us from one graduate student, one alloy, one PhD. Such goals will require more sophisticated strategies and research paradigms than applying data-science methods to the same tasks set currently undertaken by students.
Read more →
DIKW pyramid

The DIKW pyramid (also known as the knowledge pyramid or information hierarchy) is a model describing relationships between data, information, knowledge and wisdom sometimes also stylized as a chain, refer to models of possible structural and functional relationships between a set of components—often four, data, information, knowledge, and wisdom. The concept has roots predating the 1980s. In the latter years of that decade, interest in the models grew after explicit presentations and discussions, including from Milan Zeleny, Russell Ackoff, and Robert W. Lucky. Subsequent important discussions extended along theoretical and practical lines into the coming decades. While debate continues as to actual meaning of the component terms of DIKW-type models, and the actual nature of their relationships—including occasional doubt being cast over any simple, linear, unidirectional model—even so they have become very popular visual representations in use by business, the military, and others. Among the academic and popular, not all versions of the DIKW-type models include all four components (earlier ones excluding data, later ones excluding or downplaying wisdom, and several including additional components (for instance Ackoff inserting "understanding" before and Zeleny adding "enlightenment" after the wisdom component). In addition, DIKW-type models are no longer always presented as pyramids, instead also as a chart or framework (e.g., by Zeleny), as flow diagrams (e.g., by Liew, and by Chisholm et al.), and sometimes as a continuum (e.g., by Choo et al.). == Short description == As Rowley noted in 2007, the DIKW model "is often quoted, or used implicitly, in definitions of data, information and knowledge in the information management, information systems and knowledge management literatures, but [as of that date] there ha[d] been limited direct discussion of the hierarchy". Reviews of textbooks and a survey of scholars in relevant fields indicate that there was not a consensus as to definitions used in the model as of that date, and as reviewed by Liew in that year, even less "in the description of the processes that transform components lower in the hierarchy into those above them". Zins work, published in 2007—from studies in 2003-2005 that documented "130 definitions of data, information, and knowledge formulated by 45 scholars", published in 2007—to suggest that the data–information–knowledge components of DIKW refer to a class of no less than five models, as a function of whether data, information, and knowledge are each conceived of as subjective, objective (what Zins terms, "universal" or "collective") or both. In Zins' usage, subjective and objective "are not related to arbitrariness and truthfulness, which are usually attached to the concepts of subjective knowledge and objective knowledge". Information science, Zins argues, studies data and information, but not knowledge, as knowledge is an internal (subjective) rather than an external (universal–collective) phenomenon. == Representations == === Graphical representation === DIKW is a hierarchical model often depicted as a pyramid, sometimes as a chain, with data at its base and wisdom at its apex (or chain-beginning and -end). Both Zeleny and Ackoff have been credited with originating the pyramid representation, although neither used a pyramid to present their ideas. According to Wallace, Debons and colleagues may have been the first to "present the hierarchy graphically". Many variations of the DIKW-type pyramid have been produced. One, in use by knowledge managers in the United States Department of Defense, attempts to show the DIKW progression to enable effective decisions and consequent activities supporting shared understanding throughout defense organizations, as well as supporting management of risks associated with decisions. DIKW-type hierarchical information paradigms have also been represented as two-dimensional charts, and as flow diagrams, where relationships between the components may be presented less hierarchically, with defining aspects of the relationships, feedback loops, etc. === Computational representation === Intelligent decision support systems are trying to improve decision making by introducing new technologies and methods from the domain of modeling and simulation in general, and in particular from the domain of intelligent software agents in the contexts of agent-based modeling. The following example describes a military decision support system, but the architecture and underlying conceptual idea are transferable to other application domains: The value chain starts with data quality describing the information within the underlying command and control systems. Information quality tracks the completeness, correctness, currency, consistency and precision of the data items and information statements available. Knowledge quality deals with procedural knowledge and information embedded in the command and control system such as templates for adversary forces, assumptions about entities such as ranges and weapons, and doctrinal assumptions, often coded as rules. Awareness quality measures the degree of using the information and knowledge embedded within the command and control system. Awareness is explicitly placed in the cognitive domain. By the introduction of a common operational picture, data are put into context, which leads to information instead of data. The next step, which is enabled by service-oriented web-based infrastructures (but not yet operationally used), is the use of models and simulations for decision support. Simulation systems are the prototype for procedural knowledge, which is the basis for knowledge quality. Finally, using intelligent software agents to continually observe the battle sphere, apply models and simulations to analyze what is going on, to monitor the execution of a plan, and to do all the tasks necessary to make the decision maker aware of what is going on, command and control systems could even support situational awareness, the level in the value chain traditionally limited to pure cognitive methods. == History == Danny P. Wallace, a professor of library and information science, explained that the origin of the DIKW pyramid is uncertain: The presentation of the relationships among data, information, knowledge, and sometimes wisdom in a hierarchical arrangement has been part of the language of information science for many years. Although it is uncertain when and by whom those relationships were first presented, the ubiquity of the notion of a hierarchy is embedded in the use of the acronym DIKW as a shorthand representation for the data-to-information-to-knowledge-to-wisdom transformation.Many authors think that the idea of the DIKW relationship originated from two lines in the poem "Choruses", by T. S. Eliot, that appeared in the pageant play The Rock, in 1934: === Knowledge, intelligence, and wisdom === In 1927, Clarence W. Barron addressed his employees at Dow Jones & Company on the hierarchy: "Knowledge, Intelligence and Wisdom". === Data, information, knowledge === In 1955, English-American economist and educator Kenneth Boulding presented a variation on the hierarchy consisting of "signals, messages, information, and knowledge". However, "[t]he first author to distinguish among data, information, and knowledge and to also employ the term 'knowledge management' may have been American educator Nicholas L. Henry", in a 1974 journal article. === Data, information, knowledge, wisdom === Other early versions (prior to 1982) of the hierarchy that refer to a data tier include those of Chinese-American geographer Yi-Fu Tuan and sociologist-historian Daniel Bell.. In 1980, Irish-born engineer Mike Cooley invoked the same hierarchy in his critique of automation and computerization, in his book Architect or Bee?: The Human / Technology Relationship. Thereafter, in 1987, Czechoslovakia-born educator Milan Zeleny mapped the components of the hierarchy to knowledge forms: know-nothing, know-what, know-how, and know-why. Zeleny "has frequently been credited with proposing the [representation of DIKW as a pyramid ]... although he actually made no reference to any such graphical model." The hierarchy appears again in a 1988 address to the International Society for General Systems Research, by American organizational theorist Russell Ackoff, published in 1989. Subsequent authors and textbooks cite Ackoff's as the "original articulation" of the hierarchy or otherwise credit Ackoff with its proposal. Ackoff's version of the model includes an understanding tier (as Adler had, before him), interposed between knowledge and wisdom. Although Ackoff did not present the hierarchy graphically, he has also been credited with its representation as a pyramid. In 1989, Bell Labs veteran Robert W. Lucky wrote about the four-tier "information hierarchy" in the form of a pyramid in his book Silicon Dreams. In the same year as Ackoff presented his a
Read more →
Exercism

Exercism is an online, open-source, free coding platform that offers code practice and mentorship on 77 different programming languages. == History == Software developer Katrina Owen created Exercism while she was teaching programming at Jumpstart Labs. The platform was developed as an internal tool to solve the problem of her own students not receiving feedback on the coding problems they were practicing. Katrina put the site publicly online and found that people were sharing it with their friends, practicing together and giving each other feedback. Within 12 months, the site had organically grown to see over 6,000 users had submitted code or feedback, and hundreds of volunteers contribute to the languages or tooling on the platform. In 2016, Jeremy Walker joined as co-founder and CEO. In July 2018, the site was relaunched with a new design and centered around a formal mentoring mode, at which point Katrina stepped back from day-to-day involvement. == Product == In the past, the website differed from other coding platforms by requiring students to download exercises through a command line client, solve the code on their own computers then submit the solution for feedback, at which point they can also view other's solutions to the same problem. Since its second relaunch in 2021, solutions can be edited and submitted through a web editor, though the command line client remains available. Exercism has tracks for 74 programming languages. Among the notable languages taught: ABAP, C, C#, C++, CoffeeScript, Delphi, Elm, Erlang, F#, Gleam, Go, Java, JavaScript, Julia, Kotlin, Objective-C, PHP, Python, Raku, Red, Ruby, Rust, Scala, Swift, and V (Vlang). In 2023, the site launched a "12 in 23" challenge for users to learn the basics of 12 different languages - one per month in 2023. == Open source == The Exercism codebase is open source. In April 2016, it consisted of 50 repositories including website code, API code, command-line code and, most of all, over 40 stand-alone repositories for different language tracks. As of February 2024 Exercism has 14,344 contributors, maintains 366 repositories, and 19,603 mentors.
Read more →
KiSAO

The Kinetic Simulation Algorithm Ontology (KiSAO) supplies information about existing algorithms available for the simulation of systems biology models, their characterization and interrelationships. KiSAO is part of the BioModels.net project and of the COMBINE initiative. == Structure == KiSAO consists of three main branches: simulation algorithm simulation algorithm characteristic simulation algorithm parameter The elements of each algorithm branch are linked to characteristic and parameter branches using has characteristic and has parameter relationships accordingly. The algorithm branch itself is hierarchically structured using relationships which denote that the descendant algorithms were derived from, or specify, more general ancestors.
Read more →
Point-in-time recovery

Point-in-time recovery (PITR) in the context of computers involves systems, often databases, whereby an administrator can restore or recover a set of data or a particular setting from a time in the past. Note for example Windows's capability to restore operating-system settings from a past date (for instance, before data corruption occurred). Time Machine for macOS provides another example of point-in-time recovery. Once PITR logging starts for a PITR-capable database, a database administrator can restore that database from backups to the state that it had at any time since.
Read more →