AI Chat Character Talkie

AI Chat Character Talkie — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Luminance HDR

Luminance HDR, formerly Qtpfsgui, is graphics software used for the creation and manipulation of high-dynamic-range images. Released under the terms of the GPL, it is available for Linux, Microsoft Windows, and Mac OS X (Intel only). Luminance HDR supports several High Dynamic Range (HDR) as well as Low Dynamic Range (LDR) file formats. == Functionality == Prerequisite of HDR photography are several narrow-range digital images with different exposures. Luminance HDR combines these images and calculates a high-contrast image. In order to view this image on a regular computer monitor, Luminance HDR can convert it into a displayable LDR image format using a variety of methods, such as tone mapping. Currently fifteen different tone mapping operators (algorithms) are available, each one with its tunable parameters. Different image processing techniques can be applied to the generated HDR images, such as resizing, cropping, rotating and a number of projective transformations. The software also provides batch processing functionality for creating HDR images and for tone mapping them in a non-interactive way. A module for copying Exif data among sets of images is also provided. For users who prefers the command line, a non-GUI, non-graphical interface is also available on all supported platforms. A common problem with HDR photography is that images need to be aligned exactly. If the subject is static, this can be achieved using a tripod or a stable surface on which the camera is placed. In the case of image data that does not align exactly, an automatic alignment can be performed using a tool provided by the Hugin project. If this automation doesn't provide the desired result, the user may improve it manually. == Supported formats == HDR images are images with a high dynamic range and, using Luminance HDR, they can be created as well as edited. The following HDR graphic formats are supported: OpenEXR Radiance HDR Tag Image File Format (TIFF) Format: 16 Bit, 32 Bit (Float) and LogLuv Raw PFS native Luminance HDR can create an HDR image from several LDR images and tonemap an HDR into an LDR. The following LDR formats are supported: JPG PNG Portable Pixmap (PPM) Portable Bitmap (PBM) TIFF (8 Bit)
Read more →
Sprite multiplexing

Sprite multiplexing is a computer graphics technique where additional sprites (moving images) can be drawn on the screen, beyond the nominal maximum. It is largely historical, applicable principally to older hardware, where limited resources (such as CPU speed and memory) meant only a relatively small number of sprites were supported. On the other hand, it is also true that without multiplexing, the sprite circuitry would be idle much of the time, and limited resources were wasted. == Description == The sprite multiplexing technique is based on the idea that while the hardware may only support a finite number of sprites, it is sometimes possible to re-use the same sprite "slots" more than once per frame or scan line. The program will first use the hardware to draw one or more sprite(s), as normal. Before the next frame (or next scanline) needs to be drawn, the software reprograms the hardware to display additional sprites, in other positions. For example, the Nintendo Entertainment System explicitly supports hardware sprite multiplexing, where it has 64 hardware sprites, but is only capable of rendering 8 of them per scanline. On the older Atari 2600, sprite multiplexing was not intentionally designed in, but programmers discovered they could reset the TIA graphics chip to draw additional sprites on the same scanline. The sprite multiplexing technique relies on the program being able to identify what part of the video screen is being drawn at the moment, or being triggered by the video hardware to run a subroutine at the crucial moment. The programmer must carefully consider the layout of the screen. If the video graphics hardware is not reprogrammed in time for the extra sprites to be displayed, they will not appear, or will be drawn incorrectly. Modern video graphics hardware typically does not use hardware sprites, since modern computer systems do not have the kind of limitations that sprite hardware is designed to circumvent. == Implementations == Systems that allow the programmer to employ the sprite multiplexing technique include: Atari 2600 Atari 8-bit computers Amiga Commodore 64 MSX Nintendo Entertainment System Super Nintendo Entertainment System Master System Sega Genesis/Mega Drive
Read more →
Biometric device

A biometric device is a security identification and authentication device. Such devices use automated methods of verifying or recognising the identity of a living person based on a physiological or behavioral characteristic. These characteristics include fingerprints, facial images, iris and voice recognition. == History == Biometric devices have been in use for thousands of years. Non-automated biometric devices have been in use since 500 BC, when ancient Babylonians would sign their business transactions by pressing their fingertips into clay tablets. Automation in biometric devices was first seen in the 1960s. The Federal Bureau of Investigation (FBI) in the 1960s, introduced the Indentimat, which started checking for fingerprints to maintain criminal records. The first systems measured the shape of the hand and the length of the fingers. Although discontinued in the 1980s, the system set a precedent for future Biometric Devices. == Subgroups == The characteristic of the human body is used to access information by the users. According to these characteristics, the sub-divided groups are Chemical biometric devices: Analyses the segments of the DNA to grant access to the users. Visual biometric devices: Analyses the visual features of the humans to grant access which includes iris recognition, face recognition, Finger recognition, and Retina Recognition. Behavioral biometric devices: Analyses the Walking Ability and Signatures (velocity of sign, width of sign, pressure of sign) distinct to every human. Olfactory biometric devices: Analyses the odor to distinguish between varied users. Auditory biometric devices: Analyses the voice to determine the identity of a speaker for accessing control. == Uses == === Workplace === Biometrics are being used to establish better and accessible records of the hour's employee's work. With the increase in "Buddy Punching" (a case where employees clocked out coworkers and fraudulently inflated their work hours) employers have looked towards new technology like fingerprint recognition to reduce such fraud. Additionally, employers are also faced with the task of proper collection of data such as entry and exit times. Biometric devices make for largely fool proof and reliable ways of enabling to collect data as employees have to be present to enter biometric details which are unique to them. === Immigration === As the demand for air travel grows and more people travel, modern-day airports have to implement technology in such a way that there are no long queues. Biometrics are being implemented in more and more airports as they enable quick recognition of passengers and hence lead to lower volume of people standing in queues. One such example is of the Dubai International Airport which plans to make immigration counters a relic of the past as they implement IRIS on the move technology (IOM) which should help the seamless departures and arrivals of passengers at the airport. === Handheld and personal devices === Fingerprint sensors can be found on mobile devices. The fingerprint sensor is used to unlock the device and authorize actions, like money and file transfers, for example. It can be used to prevent a device from being used by an unauthorized person. It is also used in attendance in number of colleges and universities. == Present day biometric devices == === Personal signature verification systems === This is one of the most highly recognised and acceptable biometrics in corporate surroundings. This verification has been taken one step further by capturing the signature while taking into account many parameters revolving around this like the pressure applied while signing, the speed of the hand movement and the angle made between the surface and the pen used to make the signature. This system also has the ability to learn from users as signature styles vary for the same user. Hence by taking a sample of data, this system is able to increase its own accuracy. === Iris recognition system === Iris recognition involves the device scanning the pupil of the subject and then cross referencing that to data stored on the database. It is one of the most secure forms of authentication, as while fingerprints can be left behind on surfaces, iris prints are extremely hard to be stolen. Iris recognition is widely applied by organisations dealing with the masses, one being the Aadhaar identification system issued by the Government of India to keep records of its population. The reason for this is that iris recognition makes use of iris prints of humans, which change little over the course of one's lifetime. == Problems with present day biometric devices == === Biometric spoofing === Biometric spoofing is a method of fooling a biometric identification management system, where a counterfeit mold is presented in front of the biometric scanner. This counterfeit mold emulates the unique biometric attributes of an individual so as to confuse the system between the artifact and the real biological target and gain access to sensitive data/materials. One such high-profile case of Biometric spoofing came to the limelight when it was found that German Defence Minister, Ursula von der Leyen's fingerprint had been successfully replicated by Chaos Computer Club. The group used high quality camera lenses and shot images from 6 feet away. They used a professional finger software and mapped the contours of the Ministers thumbprint. Although progress has been made to stop spoofing. Using the principle of pulse oximetry — the liveliness of the test subject is taken into account by measure of blood oxygenation and the heart rate. This reduces attacks like the ones mentioned above, although these methods aren't commercially applicable as costs of implementation are high. This reduces their real world application and hence makes biometrics insecure until these methods are commercially viable. === Accuracy === Accuracy is a major issue with biometric recognition. Passwords are still extremely popular, because a password is static in nature, while biometric data can be subject to change (such as one's voice becoming heavier due to puberty, or an accident to the face, which could lead to improper reading of facial scan data). When testing voice recognition as a substitute to PIN-based systems, Barclays reported that their voice recognition system is 95 percent accurate. This statistic means that many of its customers' voices might still not be recognised even when correct. This uncertainty revolving around the system could lead to slower adoption of biometric devices, continuing the reliance of traditional password-based methods. == Benefits of biometric devices over traditional methods of authentication == Biometric data cannot be lent and hacking of Biometric data is complicated hence it makes it safer to use than traditional methods of authentication like passwords which can be lent and shared. Passwords do not have the ability to judge the user but rely only on the data provided by the user, which can easily be stolen while Biometrics work on the uniqueness of each individual. Passwords can be forgotten and recovering them can take time, whereas Biometric devices rely on biometric data which tends to be unique to a person, hence there is no risk of forgetting the authentication data. A study conducted among Yahoo! users found that at least 1.5 percent of Yahoo users forgot their passwords every month, hence this makes accessing services more lengthy for consumers as the process of recovering passwords is lengthy. These shortcomings make Biometric devices more efficient and reduces effort for the end user. == Future == Researchers are targeting the drawbacks of present-day biometric devices and developing to reduce problems like biometric spoofing and inaccurate intake of data. Technologies which are being developed are- The United States Military Academy are developing an algorithm that allows identification through the ways each individual interacts with their own computers; this algorithm considers unique traits like typing speed, rhythm of writing and common spelling mistakes. This data allows the algorithm to create a unique profile for each user by combining their multiple behavioral and stylometric information. This can be very difficult to replicate collectively. A recent innovation by Kenneth Okereafor and, presented an optimized and secure design of applying biometric liveness detection technique using a trait randomization approach. This novel concept potentially opens up new ways of mitigating biometric spoofing more accurately, and making impostor predictions intractable or very difficult in future biometric devices. A simulation of Kenneth Okereafor's biometric liveness detection algorithm using a 3D multi-biometric framework consisting of 15 liveness parameters from facial print, finger print and iris pattern traits resulted in a system efficiency of the 99.2% over a cardinality of 125 distinct randomization combinat
Read more →
Lossless join decomposition

In database design, a lossless join decomposition is a decomposition of a relation r {\displaystyle r} into relations r 1 , r 2 {\displaystyle r_{1},r_{2}} such that a natural join of the two smaller relations yields back the original relation. This is central in removing redundancy safely from databases while preserving the original data. Lossless join can also be called non-additive. == Definition == A relation r {\displaystyle r} on schema R {\displaystyle R} decomposes losslessly onto schemas R 1 {\displaystyle R_{1}} and R 2 {\displaystyle R_{2}} if π R 1 ( r ) ⋈ π R 2 ( r ) = r {\displaystyle \pi _{R_{1}}(r)\bowtie \pi _{R_{2}}(r)=r} , that is r {\displaystyle r} is the natural join of its projections onto the smaller schemas. A pair ( R 1 , R 2 ) {\displaystyle (R_{1},R_{2})} is a lossless-join decomposition of R {\displaystyle R} or said to have a lossless join with respect to a set of functional dependencies F {\displaystyle F} if any relation r ( R ) {\displaystyle r(R)} that satisfies F {\displaystyle F} decomposes losslessly onto R 1 {\displaystyle R_{1}} and R 2 {\displaystyle R_{2}} . Decompositions into more than two schemas can be defined in the same way. == Criteria == A decomposition R = R 1 ∪ R 2 {\displaystyle R=R_{1}\cup R_{2}} has a lossless join with respect to F {\displaystyle F} if and only if the closure of R 1 ∩ R 2 {\displaystyle R_{1}\cap R_{2}} includes R 1 ∖ R 2 {\displaystyle R_{1}\setminus R_{2}} or R 2 ∖ R 1 {\displaystyle R_{2}\setminus R_{1}} . In other words, one of the following must hold: ( R 1 ∩ R 2 ) → ( R 1 ∖ R 2 ) ∈ F + {\displaystyle (R_{1}\cap R_{2})\to (R_{1}\setminus R_{2})\in F^{+}} ( R 1 ∩ R 2 ) → ( R 2 ∖ R 1 ) ∈ F + {\displaystyle (R_{1}\cap R_{2})\to (R_{2}\setminus R_{1})\in F^{+}} === Criteria for multiple sub-schemas === Multiple sub-schemas R 1 , R 2 , . . . , R n {\displaystyle R_{1},R_{2},...,R_{n}} have a lossless join if there is some way in which we can repeatedly perform lossless joins until all the schemas have been joined into a single schema. Once we have a new sub-schema made from a lossless join, we are not allowed to use any of its isolated sub-schema to join with any of the other schemas. For example, if we can do a lossless join on a pair of schemas R i , R j {\displaystyle R_{i},R_{j}} to form a new schema R i , j {\displaystyle R_{i,j}} , we use this new schema (rather than R i {\displaystyle R_{i}} or R j {\displaystyle R_{j}} ) to form a lossless join with another schema R k {\displaystyle R_{k}} (which may already be joined (e.g., R k , l {\displaystyle R_{k,l}} )). == Example == Let R = { A , B , C , D } {\displaystyle R=\{A,B,C,D\}} be the relation schema, with attributes A, B, C and D. Let F = { A → B C } {\displaystyle F=\{A\rightarrow BC\}} be the set of functional dependencies. Decomposition into R 1 = { A , B , C } {\displaystyle R_{1}=\{A,B,C\}} and R 2 = { A , D } {\displaystyle R_{2}=\{A,D\}} is lossless under F because R 1 ∩ R 2 = A {\displaystyle R_{1}\cap R_{2}=A} and we have a functional dependency A → B C {\displaystyle A\rightarrow BC} . In other words, we have proven that ( R 1 ∩ R 2 → R 1 ∖ R 2 ) ∈ F + {\displaystyle (R_{1}\cap R_{2}\rightarrow R_{1}\setminus R_{2})\in F^{+}} .
Read more →
Sprayprinter

SprayPrinter is a device that attaches to aerosol paint cans whereby users can print images via Bluetooth from a smartphone onto a wall or almost any surface. == History == The technology behind SprayPrinter was developed by Mihkel Joala. He explained in a 2016 interview with New Atlas that his idea was inspired by the modern car engine and the Nintendo Wii console. "Engines nowadays use extremely fast valves to spray fuel to [the] combustion chamber," says Joala. "I realized I can use them to shoot paint with pinpoint accuracy." As of December 2021, the company appears to be no longer selling products. == Awards and Recognitions == In 2015, SprayPrinter received €8,000 from the Estonian prototyping contest Prototron for its initial prototype. In 2016, the SprayPrinter team won the grand prize of €30,000 from the televised pitching competition Ajujaht.
Read more →
Client honeypot

Honeypots are security devices whose value lie in being probed and compromised. Traditional honeypots are servers (or devices that expose server services) that wait passively to be attacked. Client Honeypots are active security devices in search of malicious servers that attack clients. The client honeypot poses as a client and interacts with the server to examine whether an attack has occurred. Often the focus of client honeypots is on web browsers, but any client that interacts with servers can be part of a client honeypot (for example ftp, email, ssh, etc.). There are several terms that are used to describe client honeypots. Besides client honeypot, which is the generic classification, honeyclient is the other term that is generally used and accepted. However, there is a subtlety here, as "honeyclient" is actually a homograph that could also refer to the first known open source client honeypot implementation (see below), although this should be clear from the context. == Architecture == A client honeypot is composed of three components. The first component, a queuer, is responsible for creating a list of servers for the client to visit. This list can be created, for example, through crawling. The second component is the client itself, which is able to make a requests to servers identified by the queuer. After the interaction with the server has taken place, the third component, an analysis engine, is responsible for determining whether an attack has taken place on the client honeypot. In addition to these components, client honeypots are usually equipped with some sort of containment strategy to prevent successful attacks from spreading beyond the client honeypot. This is usually achieved through the use of firewalls and virtual machine sandboxes. Analogous to traditional server honeypots, client honeypots are mainly classified by their interaction level: high or low; which denotes the level of functional interaction the server can utilize on the client honeypot. In addition to this there are also newly hybrid approaches which denotes the usage of both high and low interaction detection techniques. == High interaction == High interaction client honeypots are fully functional systems comparable to real systems with real clients. As such, no functional limitations (besides the containment strategy) exist on high interaction client honeypots. Attacks on high interaction client honeypots are detected via inspection of the state of the system after a server has been interacted with. The detection of changes to the client honeypot may indicate the occurrence of an attack against that has exploited a vulnerability of the client. An example of such a change is the presence of a new or altered file. High interaction client honeypots are very effective at detecting unknown attacks on clients. However, the tradeoff for this accuracy is a performance hit from the amount of system state that has to be monitored to make an attack assessment. Also, this detection mechanism is prone to various forms of evasion by the exploit. For example, an attack could delay the exploit from immediately triggering (time bombs) or could trigger upon a particular set of conditions or actions (logic bombs). Since no immediate, detectable state change occurred, the client honeypot is likely to incorrectly classify the server as safe even though it did successfully perform its attack on the client. Finally, if the client honeypots are running in virtual machines, then an exploit may try to detect the presence of the virtual environment and cease from triggering or behave differently. === Capture-HPC === Capture [1] is a high interaction client honeypot developed by researchers at Victoria University of Wellington, NZ. Capture differs from existing client honeypots in various ways. First, it is designed to be fast. State changes are being detected using an event based model allowing to react to state changes as they occur. Second, Capture is designed to be scalable. A central Capture server is able to control numerous clients across a network. Third, Capture is supposed to be a framework that allows to utilize different clients. The initial version of Capture supports Internet Explorer, but the current version supports all major browsers (Internet Explorer, Firefox, Opera, Safari) as well as other HTTP aware client applications, such as office applications and media players. === HoneyClient === HoneyClient [2] is a web browser based (IE/FireFox) high interaction client honeypot designed by Kathy Wang in 2004 and subsequently developed at MITRE. It was the first open source client honeypot and is a mix of Perl, C++, and Ruby. HoneyClient is state-based and detects attacks on Windows clients by monitoring files, process events, and registry entries. It has integrated the Capture-HPC real-time integrity checker to perform this detection. HoneyClient also contains a crawler, so it can be seeded with a list of initial URLs from which to start and can then continue to traverse web sites in search of client-side malware. === HoneyMonkey (dead since 2010) === HoneyMonkey [3] is a web browser based (IE) high interaction client honeypot implemented by Microsoft in 2005. It is not available for download. HoneyMonkey is state based and detects attacks on clients by monitoring files, registry, and processes. A unique characteristic of HoneyMonkey is its layered approach to interacting with servers in order to identify zero-day exploits. HoneyMonkey initially crawls the web with a vulnerable configuration. Once an attack has been identified, the server is reexamined with a fully patched configuration. If the attack is still detected, one can conclude that the attack utilizes an exploit for which no patch has been publicly released yet and therefore is quite dangerous. === SHELIA (dead since 2009) === Shelia [4] is a high interaction client honeypot developed by Joan Robert Rocaspana at Vrije Universiteit Amsterdam. It integrates with an email reader and processes each email it receives (URLs & attachments). Depending on the type of URL or attachment received, it opens a different client application (e.g. browser, office application, etc.) It monitors whether executable instructions are executed in data area of memory (which would indicate a buffer overflow exploit has been triggered). With such an approach, SHELIA is not only able to detect exploits, but is able to actually ward off exploits from triggering. === UW Spycrawler === The Spycrawler [5] developed at the University of Washington is yet another browser based (Mozilla) high interaction client honeypot developed by Moshchuk et al. in 2005. This client honeypot is not available for download. The Spycrawler is state based and detects attacks on clients by monitoring files, processes, registry, and browser crashes. Spycrawlers detection mechanism is event based. Further, it increases the passage of time of the virtual machine the Spycrawler is operating in to overcome (or rather reduce the impact of) time bombs. === Web Exploit Finder === WEF [6] is an implementation of an automatic drive-by-download – detection in a virtualized environment, developed by Thomas Müller, Benjamin Mack and Mehmet Arziman, three students from the Hochschule der Medien (HdM), Stuttgart during the summer term in 2006. WEF can be used as an active HoneyNet with a complete virtualization architecture underneath for rollbacks of compromised virtualized machines. == Low interaction == Low interaction client honeypots differ from high interaction client honeypots in that they do not utilize an entire real system, but rather use lightweight or simulated clients to interact with the server. (in the browser world, they are similar to web crawlers). Responses from servers are examined directly to assess whether an attack has taken place. This could be done, for example, by examining the response for the presence of malicious strings. Low interaction client honeypots are easier to deploy and operate than high interaction client honeypots and also perform better. However, they are likely to have a lower detection rate since attacks have to be known to the client honeypot in order for it to detect them; new attacks are likely to go unnoticed. They also suffer from the problem of evasion by exploits, which may be exacerbated due to their simplicity, thus making it easier for an exploit to detect the presence of the client honeypot. === HoneyC === HoneyC [7] is a low interaction client honeypot developed at Victoria University of Wellington by Christian Seifert in 2006. HoneyC is a platform independent open source framework written in Ruby. It currently concentrates driving a web browser simulator to interact with servers. Malicious servers are detected by statically examining the web server's response for malicious strings through the usage of Snort signatures. === Monkey-Spider (dead since 2008) === Monkey-Spider [8] is a low-interaction client honeypot i
Read more →
Jordan Antiquities Database and Information System

The Jordan Antiquities Database and Information System (JADIS) was a computer database of antiquities in Jordan, the first of its kind in the Arab world. It was established by the Department of Antiquities in 1990, in cooperation with the American Center for Oriental Research in Amman and sponsored by the United States Agency for International Development. JADIS was in use until 2002, when it was superseded by a new system, MEGA-J. Over 10,841 antiquities were registered in the database. An introduction and printed summary of the database was published by the Department of Antiquities in 1994, edited by Gaetano Palumbo.
Read more →
Two-phase locking

In databases and transaction processing, two-phase locking (2PL) is a pessimistic concurrency control method that guarantees conflict-serializability. It is also the name of the resulting set of database transaction schedules (histories). The protocol uses locks, applied by a transaction to data, which may block (interpreted as signals to stop) other transactions from accessing the same data during the transaction's life. By the 2PL protocol, locks are applied and removed in two phases: Expanding phase: locks are acquired and no locks are released. Shrinking phase: locks are released and no locks are acquired. Two types of locks are used by the basic protocol: Shared and Exclusive locks. Refinements of the basic protocol may use more lock types. Using locks that block processes, 2PL, S2PL, and SS2PL may be subject to deadlocks that result from the mutual blocking of two or more transactions. == Read and write locks == Locks are used to guarantee serializability. A transaction is holding a lock on an object if that transaction has acquired a lock on that object which has not yet been released. For 2PL, the only used data-access locks are read-locks (shared locks) and write-locks (exclusive locks). Below are the rules for read-locks and write-locks: A transaction is allowed to read an object if and only if it is holding a read-lock or write-lock on that object. A transaction is allowed to write an object if and only if it is holding a write-lock on that object. A schedule (i.e., a set of transactions) is allowed to hold multiple locks on the same object simultaneously if and only if none of those locks are write-locks. If a disallowed lock attempts on being held simultaneously, it will be blocked. == Variants == Note that all conflict serializable schedules are also view serializable (but not vice-versa). === Two-phase locking === According to the two-phase locking protocol, each transaction handles its locks in two distinct, consecutive phases during the transaction's execution: Expanding phase (aka Growing phase): locks are acquired and no locks are released (the number of locks can only increase). Shrinking phase (aka Contracting phase): locks are released and no locks are acquired. The two phase locking rules can be summarized as: each transaction must never acquire a lock after it has released a lock. The serializability property is guaranteed for a schedule with transactions that obey this rule. Typically, without explicit knowledge in a transaction on end of phase 1, the rule is safely determined only when a transaction has completed processing and requested commit. In this case, all the locks can be released at once (phase 2). === Conservative two-phase locking === Conservative two-phase locking (C2PL) differs from 2PL in that transactions obtain all the locks they need before the actual execution begins. This is to ensure that a transaction that already holds some locks will not block waiting for other locks. C2PL prevents deadlocks. In cases of heavy lock contention, C2PL reduces the time locks are held on average, relative to 2PL and Strict 2PL, because transactions that hold locks are never blocked. In light lock contention, C2PL holds more locks than is necessary, because it is difficult to predict which locks will be needed in the future, thus leading to higher overhead. A C2PL transaction will not obtain any locks if it cannot obtain all the locks it needs in its initial request. Furthermore, each transaction needs to declare its read and write set (the data items that will be read/written), which is not always possible. Because of these limitations, C2PL is not used very frequently. === Strict two-phase locking === To comply with the strict two-phase locking (S2PL) protocol, a transaction needs to comply with 2PL, and release its write (exclusive) locks only after the transaction has ended (i.e., either committed or aborted). On the other hand, read (shared) locks are released regularly during the shrinking phase. Unlike 2PL, S2PL provides strictness (a special case of cascade-less recoverability). This protocol is not appropriate in B-trees because it causes Bottleneck (while B-trees always starts searching from the parent root). === Strong strict two-phase locking === or Rigorousness, or Rigorous scheduling, or Rigorous two-phase locking To comply with strong strict two-phase locking (SS2PL), a transaction's read and write locks are released only after that transaction has ended (i.e., either committed or aborted). A transaction obeying SS2PL has only a phase 1 and lacks a phase 2 until the transaction has completed. Every SS2PL schedule is also an S2PL schedule, but not vice versa.
Read more →
Fabric Connect

Fabric Connect, in computer networking usage, is the name used by Extreme Networks to market an extended implementation of the IEEE 802.1aq and IEEE 802.1ah-2008 standards. The Fabric Connect technology was originally developed by the Enterprise Solutions R&D department within Nortel Networks. In 2009, Avaya, Inc acquired Nortel Networks Enterprise Business Solutions; this transaction included the Fabric Connect intellectual property together with all of the Ethernet Switching platforms that supported it. Subsequently, the Fabric Connect technology became part of the Extreme Networks portfolio by virtue of their 2017 purchase of the Avaya Networking business and assets. It was during the Avaya era that this technology was promoted as the lead element of the Virtual Enterprise Network Architecture (VENA). == Technologies == === Fabric Connect === Fabric Connect's provides network-wide, end-to-end, multi-layer virtualization. A network virtualization capability, based on an enhanced implementation of the IEEE 802.1aq Shortest Path Bridging (SPB) standard, Fabric Connect offers the ability to create a simplified network that can dynamically virtualize elements to efficiently provision and utilize resources, thus reducing the strain on the network and personnel. Extreme Networks base the Fabric Connect technology on the SPB standard, including support for RFC 6329, and have integrated IP Routing and IP Multicast support; this unified technology allows for the replacement of multiple conventional protocols such as Spanning Tree, RIP and/or OSPF, ECMP, and PIM. === Fabric Attach === An adjunct to the Fabric Connect technology, Fabric Attach allows network operators to extend network virtualization directly into conventional wiring closets (using existing non-Fabric Ethernet switches) and automate the provisioning of devices to their appropriate virtual network. This is particularly relevant for the mass of unattended network end-point that are now appearing, such as IP Phones, Wireless Access Points, and IP Cameras. Fabric Attach standardized protocols such as 802.1AB LLDP to exchange credentials and obtain provisioning information that allows "Client" Switches to be automatically re-configured on the fly with parameters that let Traffic Flows Map through to Fabric Connect Edge Switches (aka "Backbone Edge Bridge" in SPB definition) functioning as a Fabric Attach "Server" Switch. This method is described by an IETF "Internet Draft", pending further standardization activity. Fabric Attach is typically used to automate Wiring Closet connectivity, but has the potential to be extensible for use in the Data Center, with Virtual Machines being able to dynamically request VLAN/VSN (Virtual Service Network) assignment based upon application requirements. == Hardware products == === Virtual Services Platform 9000 Series === A range of modular chassis-based products, featuring a carrier-grade Linux operation system, and designed for high-performance deployment scenarios that need to scale to multiple terabits of switching capacity and support 10 and 40 gigabit Ethernet connections, and is designed eventually to support 100 gigabit Ethernet. === Virtual Services Platform 8000 Series === A compact form-factor platform delivering high-density 10/40 gigabit Ethernet connectivity, and targeted at mid-market through to mid-size enterprise core switch applications. === Virtual Services Platform 7000 Series === A range of high-end 10 gigabit Ethernet stackable switches that extend fabric-based networking to the data center top-of-rack. They support 40 gigabit Ethernet via the MDA Slot. === Virtual Services Platform 4000 Series === A range of high-end gigabit Ethernet stackable switches that extend Fabric-based networking to branch and metro locations. === Ethernet Routing Switch 5000 Series === A range of high-end gigabit Ethernet stackable switches that provides enterprise-class desktop features, including PoE, and offers 10 Gbit/s uplink connections. Each Switch supports up to 144 Gbit/s of virtual backplane capacity, delivering up to 1.152 Tbit/s for a system of eight, creating a virtual backplane through a stacking configuration. === Ethernet Routing Switch 4000 Series === A range of gigabit Ethernet stackable switches that provide enterprise-class desktop features, including PoE/PoE+, and offer 1/10 Gbit/s uplink connections. Each switch supports up to 48 Gbit/s of virtual backplane capacity, delivering up to 384 Gbit/s for a system of 8, creating a virtual backplane through a stacking configuration. === Ethernet Routing Switch 3500 Series === These entry-level gigabit Ethernet stackable switches provide enterprise-class desktop features, including PoE/PoE+, and 1 Gbit/s uplink connections.
Read more →
MovieRide FX

MovieRide FX is a patented automated special visual effects video compositing engine used in the MovieRide FX mobile application for Android (requires Android 2.3 or later) and iOS (compatible with iPhone 4 and up, iPad, and iPod Touch (new generation), requires iOS 7 or later). MovieRide FX allows the user to personalize a "Hollywood-style" movie clip by inserting themself into the clip as the "actor". == Features == The MovieRide FX app uses the relevant mobile device's camera to record a video of the user and insert it into a pre-packaged "Hollywood style" movie clip. The "actor" is extracted from their recorded video clip through various known effects such as masking, keying, and motion tracking. The "actor" is then inserted into one of the pre-packaged movie clips created by the MovieRide FX visual effects artists. This is done through an automated process requiring little or no artistic or technical skill from the user. The custom movie clips pre-packaged with MovieRide FX offer the user a variety of movie scenarios. Additional clips based on popular television and movie themes are continually being developed and are available on a freemium basis. == Sharing == Once the user's footage has automatically been composited into a movie clip and rendered as an .mp4 file, it can be shared via social media, such as Facebook, YouTube, and Twitter, and by e-mail. == History == === 2012 === MovieRide FX was created by Grant Waterston and Johann Mynhardt, who started development in 2012. === 2013 === The beta version was released on Google Play in July 2013. In August 2013 MovieRide FX was a New Media Award winner in the "New Media" category of the Accolade International Awards in Los Angeles. In October 2013 MovieRide FX was awarded exhibitor space in the ‘start-up village’ at the Apps-World Expo in London. === 2014 === MovieRide FX reached the 100 000 – 500 000 downloads category on the Google Play Store in June 2014. The official Android version was launched in July 2014. iOS version released in August 2014. MovieRide FX was selected as one of the "Top 150" startups at the Pioneer Festival in Vienna in September 2014. In November 2014 MovieRide FX was shortlisted for the Appster Awards in the "Best Entertainment App" and "Most Innovative App" categories and was awarded exhibitor space at the ‘start-up village’ at the Apps-World Expo in London. Patent applications were filed in South Africa, the EU and USA in April 2014. === 2015 === In September 2015 MovieRide FX was shortlisted for "Best Software innovation" at The Technology Expo Awards in London. === 2016 === In April 2016 MovieRide FX was nominated for a National Science and Technology Forum (NSTF) award for 'Research leading to Innovation by a corporate organization' In August 2016 Movie Ride FX won two Gold Awards at the 2016 Mobile Marketing Awards (MMA Smarties SA). These two Gold awards were for the 'Innovation' and 'Best in Show’ categories. In December 2016 FlicJam Inc. was formed in the US to access the larger global market. EU patent application was published in March 2016. === 2017 === South African patent was granted in February 2017. === 2018 === US patent was granted in March 2018.
Read more →
Screen space ambient occlusion

Screen space ambient occlusion (SSAO) is a computer graphics technique for efficiently approximating the ambient occlusion effect in real time. It was developed by Vladimir Kajalin while working at Crytek and was used for the first time in 2007 by the video game Crysis, also developed by Crytek. == Implementation == The algorithm is implemented as a pixel shader, analyzing the scene depth buffer which is stored in a texture. For every pixel on the screen, the pixel shader samples the depth values around the current pixel and tries to compute the amount of occlusion from each of the sampled points. In its simplest implementation, the occlusion factor depends only on the depth difference between sampled point and current point. Without additional smart solutions, such a brute force method would require about 200 texture reads per pixel for good visual quality. This is not acceptable for real-time rendering on current graphics hardware. In order to get high quality results with far fewer reads, sampling is performed using a randomly rotated kernel. The kernel orientation is repeated every N screen pixels in order to have only high-frequency noise in the final picture. In the end this high frequency noise is greatly removed by a NxN post-process blurring step taking into account depth discontinuities (using methods such as comparing adjacent normals and depths). Such a solution allows a reduction in the number of depth samples per pixel to about 16 or fewer while maintaining a high quality result, and allows the use of SSAO in soft real-time applications like computer games. Compared to other ambient occlusion solutions, SSAO has the following advantages: Independent from scene complexity. No data pre-processing needed, no loading time and no memory allocations in system memory. Works with dynamic scenes. Works in the same consistent way for every pixel on the screen. No CPU usage – it can be executed completely on the GPU. May be easily integrated into any modern graphics pipeline. SSAO also has the following disadvantages: Rather local and in many cases view-dependent, as it is dependent on adjacent texel depths which may be generated by any geometry whatsoever. Hard to correctly smooth/blur out the noise without interfering with depth discontinuities, such as object edges (the occlusion should not "bleed" onto objects). Because SSAO operates only on the current depth buffer, it can miss occluding geometry that is not rasterized into the z-buffer and may produce undersampling-related artifacts.
Read more →
Linked timestamping

Linked timestamping is a type of trusted timestamping where issued time-stamps are related to each other. Each time-stamp would contain data that authenticates the time-stamp before it, the authentication would be authenticating the entire message, including the previous time-stamps authentication, making a chain. This makes it impossible to add a time-stamp in to the middle of the chain, as any time-stamps afterwards would be different. == Description == Linked timestamping creates time-stamp tokens which are dependent on each other, entangled in some authenticated data structure. Later modification of the issued time-stamps would invalidate this structure. The temporal order of issued time-stamps is also protected by this data structure, making backdating of the issued time-stamps impossible, even by the issuing server itself. The top of the authenticated data structure is generally published in some hard-to-modify and widely witnessed media, like printed newspaper or public blockchain. There are no (long-term) private keys in use, avoiding PKI-related risks. Suitable candidates for the authenticated data structure include: Linear hash chain Merkle tree (binary hash tree) Skip list The simplest linear hash chain-based time-stamping scheme is illustrated in the following diagram: The linking-based time-stamping authority (TSA) usually performs the following distinct functions: Aggregation For increased scalability the TSA might group time-stamping requests together which arrive within a short time-frame. These requests are aggregated together without retaining their temporal order and then assigned the same time value. Aggregation creates a cryptographic connection between all involved requests; the authenticating aggregate value will be used as input for the linking operation. Linking Linking creates a verifiable and ordered cryptographic link between the current and already issued time-stamp tokens. Publishing The TSA periodically publishes some links, so that all previously issued time-stamp tokens depend on the published link and that it is practically impossible to forge the published values. By publishing widely witnessed links, the TSA creates unforgeable verification points for validating all previously issued time-stamps. == Security == Linked timestamping is inherently more secure than the usual, public-key signature based time-stamping. All consequential time-stamps "seal" previously issued ones - hash chain (or other authenticated dictionary in use) could be built only in one way; modifying issued time-stamps is nearly as hard as finding a preimage for the used cryptographic hash function. Continuity of operation is observable by users; periodic publications in widely witnessed media provide extra transparency. Tampering with absolute time values could be detected by users, whose time-stamps are relatively comparable by system design. Absence of secret keys increases system trustworthiness. There are no keys to leak and hash algorithms are considered more future-proof than modular arithmetic based algorithms, e.g. RSA. Linked timestamping scales well - hashing is much faster than public key cryptography. There is no need for specific cryptographic hardware with its limitations. The common technology for guaranteeing long-term attestation value of the issued time-stamps (and digitally signed data) is periodic over-time-stamping of the time-stamp token. Because of missing key-related risks and of the plausible safety margin of the reasonably chosen hash function this over-time-stamping period of hash-linked token could be an order of magnitude longer than of public-key signed token. == Research == === Foundations === Stuart Haber and W. Scott Stornetta proposed in 1990 to link issued time-stamps together into linear hash-chain, using a collision-resistant hash function. The main rationale was to diminish TSA trust requirements. Tree-like schemes and operating in rounds were proposed by Benaloh and de Mare in 1991 and by Bayer, Haber and Stornetta in 1992. Benaloh and de Mare constructed a one-way accumulator in 1994 and proposed its use in time-stamping. When used for aggregation, one-way accumulator requires only one constant-time computation for round membership verification. Surety started the first commercial linked timestamping service in January 1995. Linking scheme is described and its security is analyzed in the following article by Haber and Sornetta. Buldas et al. continued with further optimization and formal analysis of binary tree and threaded tree based schemes. Skip-list based time-stamping system was implemented in 2005; related algorithms are quite efficient. === Provable security === Security proof for hash-function based time-stamping schemes was presented by Buldas, Saarepera in 2004. There is an explicit upper bound N {\displaystyle N} for the number of time stamps issued during the aggregation period; it is suggested that it is probably impossible to prove the security without this explicit bound - the so-called black-box reductions will fail in this task. Considering that all known practically relevant and efficient security proofs are black-box, this negative result is quite strong. Next, in 2005 it was shown that bounded time-stamping schemes with a trusted audit party (who periodically reviews the list of all time-stamps issued during an aggregation period) can be made universally composable - they remain secure in arbitrary environments (compositions with other protocols and other instances of the time-stamping protocol itself). Buldas, Laur showed in 2007 that bounded time-stamping schemes are secure in a very strong sense - they satisfy the so-called "knowledge-binding" condition. The security guarantee offered by Buldas, Saarepera in 2004 is improved by diminishing the security loss coefficient from N {\displaystyle N} to N {\displaystyle {\sqrt {N}}} . The hash functions used in the secure time-stamping schemes do not necessarily have to be collision-resistant or even one-way; secure time-stamping schemes are probably possible even in the presence of a universal collision-finding algorithm (i.e. universal and attacking program that is able to find collisions for any hash function). This suggests that it is possible to find even stronger proofs based on some other properties of the hash functions. At the illustration above hash tree based time-stamping system works in rounds ( t {\displaystyle t} , t + 1 {\displaystyle t+1} , t + 2 {\displaystyle t+2} , ...), with one aggregation tree per round. Capacity of the system ( N {\displaystyle N} ) is determined by the tree size ( N = 2 l {\displaystyle N=2^{l}} , where l {\displaystyle l} denotes binary tree depth). Current security proofs work on the assumption that there is a hard limit of the aggregation tree size, possibly enforced by the subtree length restriction. == Standards == ISO 18014 part 3 covers 'Mechanisms producing linked tokens'. American National Standard for Financial Services, "Trusted Timestamp Management and Security" (ANSI ASC X9.95 Standard) from June 2005 covers linking-based and hybrid time-stamping schemes. There is no IETF RFC or standard draft about linking based time-stamping. RFC 4998 (Evidence Record Syntax) encompasses hash tree and time-stamp as an integrity guarantee for long-term archiving.
Read more →
Split screen (computing)

Split screen is a display technique in computer graphics that consists of dividing graphics and/or text into non-overlapping adjacent parts, typically as two or four rectangular areas. This allows for the simultaneous presentation of (usually) related graphical and textual information on a computer display. TV sports adopted this presentation methodology in the 1960s for instant replay. Non-dynamic split screens differ from windowing systems in that the latter allowed overlapping and freely movable parts of the screen (the "windows") to present both related and unrelated application data to the user. In contrast, split-screen views are strictly limited to fixed positions. The split screen technique can also be used to run two instances of an application, potentially allowing another user to interact with the second instance. == In operating systems == Split screen modes are used by mobile operating systems to enable computer multitasking similar to the window interface present in desktop operating systems. Android supports split screen view of two apps natively on all devices, while certain devices, such as Samsung Galaxy Z TriFold, support three sumultaneous views. Split screen functionality is not supported on iOS, but a similar feature called Split View is present in iPadOS, first introduced in 2015 with the first generation of iPad Pro. == In video games == The split screen feature is commonly used in non-networked, also known as couch co-op, video games with multiplayer options. In its most easily understood form, a split screen for a multiplayer video game is an audiovisual output device (usually a standard television for video game consoles) where the display has been divided into 2-4 equally sized areas (depending on number of players) so that the players can explore different areas simultaneously without being close to each other. This has historically been remarkably popular on consoles, which until the 2000s did not have access to the Internet or any other network and is less common today with modern support for networked console-to-console multiplayer. In competitive split-screen games, it is customarily considered cheating to look at another player's screen section to gain an advantage. === History === Split screen gaming dates back to at least the 1970s, with games such Drag Race (1977) from Kee Games in the arcades being presented in this format. It has always been a common feature of two or more player home console and computer games too, with notable titles being Kikstart II for 8-bit systems, a number of 16-bit racing games (such as Lotus Esprit Turbo Challenge and Road Rash II), and action/strategy games (such as Toejam & Earl and Lemmings), all employing a vertical or horizontal screen split for two player games. Xenophobe is notable as a three-way split screen arcade title, although on home platforms it was reduced to one or two screens. The addition of four controller ports on home consoles also ushered in more four-way split screen games, with Mario Kart 64 and Goldeneye 007 on the Nintendo 64 being two well known examples. In arcades, machines tended to move towards having a whole screen for each player, or multiple connected machines, for multiplayer. On home machines, especially in the first and third person shooter genres, multiplayer is now more common over a network or the internet rather than locally with split screen. Starting from the late 2000s, the presence of split screen multiplayer has largely been declining due to the increasing prevalence of online multiplayer, though TechRadar reported a resurgence of split screen due to support from independent studios and increased interest from the players.
Read more →
Ware report

Security Controls for Computer Systems, commonly called the Ware report, is a 1970 text by Willis Ware that was foundational in the field of computer security. == Development == A defense contractor in St. Louis, Missouri, had bought an IBM mainframe computer, which it was using for classified work on a fighter aircraft. To provide additional income, the contractor asked the Department of Defense (DoD) for permission to sell computer time on the mainframe to local businesses via remote terminals, while the classified work continued. At the time, the DoD did not have a policy to cover this. The DoD's Advanced Research Projects Agency (DARPA) asked Ware - a RAND employee - to chair a committee to examine and report on the feasibility of security controls for computer systems. The committee's report was a classified document given in January 1970 to the Defense Science Board (DSB), which had taken over the project from ARPA. After declassification, the report was published by RAND in October 1979. == Influence == The IEEE Computer Society said the report was widely circulated, and the IEEE Annals of the History of Computing said that it, together with Ware's 1967 Spring Joint Computer Conference session, marked the start of the field of computer security. The report influenced security certification standards and processes, especially in the banking and defense industries, where the report was instrumental in creating the Orange Book.
Read more →
Stop Motion Studio

Stop Motion Studio is a stop motion animation software developed by Cateater LLC. It is available as both an app for iOS and Android and as a software for Windows and Mac. Two versions of the software exist, the standard Stop Motion Studio for free, and the paid Stop Motion Studio Pro, which contains extra, more advanced features. The software is commonly used in brickfilming.
Read more →