AI Chat Free No Limit

AI Chat Free No Limit — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Lesk algorithm

  The Lesk algorithm is a classical algorithm for word sense disambiguation introduced by Michael E. Lesk in 1986. It operates on the premise that words within a given context are likely to share a common meaning. This algorithm compares the dictionary definitions of an ambiguous word with the words in its surrounding context to determine the most appropriate sense. Variations, such as the Simplified Lesk algorithm, have demonstrated improved precision and efficiency. However, the Lesk algorithm has faced criticism for its sensitivity to definition wording and its reliance on brief glosses. Researchers have sought to enhance its accuracy by incorporating additional resources like thesauruses and syntactic models. == Overview == The Lesk algorithm is based on the assumption that words in a given "neighborhood" (section of text) will tend to share a common topic. A simplified version of the Lesk algorithm is to compare the dictionary definition of an ambiguous word with the terms contained in its neighborhood. Versions have been adapted to use WordNet. An implementation might look like this: for every sense of the word being disambiguated one should count the number of words that are in both the neighborhood of that word and in the dictionary definition of that sense the sense that is to be chosen is the sense that has the largest number of this count. A frequently used example illustrating this algorithm is for the context "pine cone". The following dictionary definitions are used: PINE 1. kinds of evergreen tree with needle-shaped leaves 2. waste away through sorrow or illness CONE 1. solid body which narrows to a point 2. something of this shape whether solid or hollow 3. fruit of certain evergreen trees As can be seen, the best intersection is Pine #1 ⋂ Cone #3 = 2. == Simplified Lesk algorithm == In Simplified Lesk algorithm, the correct meaning of each word in a given context is determined individually by locating the sense that overlaps the most between its dictionary definition and the given context. Rather than simultaneously determining the meanings of all words in a given context, this approach tackles each word individually, independent of the meaning of the other words occurring in the same context. "A comparative evaluation performed by Vasilescu et al. (2004) has shown that the simplified Lesk algorithm can significantly outperform the original definition of the algorithm, both in terms of precision and efficiency. By evaluating the disambiguation algorithms on the Senseval-2 English all words data, they measure a 58% precision using the simplified Lesk algorithm compared to the only 42% under the original algorithm. Note: Vasilescu et al. implementation considers a back-off strategy for words not covered by the algorithm, consisting of the most frequent sense defined in WordNet. This means that words for which all their possible meanings lead to zero overlap with current context or with other word definitions are by default assigned sense number one in WordNet." Simplified LESK Algorithm with smart default word sense (Vasilescu et al., 2004) The COMPUTEOVERLAP function returns the number of words in common between two sets, ignoring function words or other words on a stop list. The original Lesk algorithm defines the context in a more complex way. == Criticisms == Unfortunately, Lesk’s approach is very sensitive to the exact wording of definitions, so the absence of a certain word can radically change the results. Further, the algorithm determines overlaps only among the glosses of the senses being considered. This is a significant limitation in that dictionary glosses tend to be fairly short and do not provide sufficient vocabulary to relate fine-grained sense distinctions. A lot of work has appeared offering different modifications of this algorithm. These works use other resources for analysis (thesauruses, synonyms dictionaries or morphological and syntactic models): for instance, it may use such information as synonyms, different derivatives, or words from definitions of words from definitions. == Lesk variants == Original Lesk (Lesk, 1986) Adapted/Extended Lesk (Banerjee and Pederson, 2002/2003): In the adaptive lesk algorithm, a word vector is created corresponds to every content word in the wordnet gloss. Concatenating glosses of related concepts in WordNet can be used to augment this vector. The vector contains the co-occurrence counts of words co-occurring with w in a large corpus. Adding all the word vectors for all the content words in its gloss creates the Gloss vector g for a concept. Relatedness is determined by comparing the gloss vector using the Cosine similarity measure. There are a lot of studies concerning Lesk and its extensions: Wilks and Stevenson, 1998, 1999; Mahesh et al., 1997; Cowie et al., 1992; Yarowsky, 1992; Pook and Catlett, 1988; Kilgarriff and Rosensweig, 2000; Kwong, 2001; Nastase and Szpakowicz, 2001; Gelbukh and Sidorov, 2004.

  Read more →
• 

  Absorbing Markov chain

  In the mathematical theory of probability, an absorbing Markov chain is a Markov chain in which every state can reach an absorbing state. An absorbing state is a state that, once entered, cannot be left. Like general Markov chains, there can be continuous-time absorbing Markov chains with an infinite state space. However, this article concentrates on the discrete-time discrete-state-space case. == Formal definition == A Markov chain is an absorbing chain if there is at least one absorbing state and it is possible to go from any state to at least one absorbing state in a finite number of steps. In an absorbing Markov chain, a state that is not absorbing is called transient. === Canonical form === Let an absorbing Markov chain with transition matrix P have t transient states and r absorbing states. The rows of P represent sources, while columns represent destinations. By ordering the transient states before the absorbing states, it can be assumed that P has the form P = [ Q R 0 I r ] , {\displaystyle P={\begin{bmatrix}Q&R\\\mathbf {0} &I_{r}\end{bmatrix}},} where Q is a t-by-t matrix, R is a nonzero t-by-r matrix, 0 is an r-by-t zero matrix, and Ir is the r-by-r identity matrix. Thus, Q describes the probability of transitioning from some transient state to another while R describes the probability of transitioning from some transient state to some absorbing state. The probability of transitioning from i to j in exactly k steps is the (i,j)-entry of Pk, further computed below. When considering only transient states, the probability is found in the upper left of Pk, the (i,j)-entry of Qk. == Fundamental matrix == === Expected number of visits to a transient state === A basic property about an absorbing Markov chain is the expected number of visits to a transient state j starting from a transient state i (before being absorbed). This can be established to be given by the (i, j) entry of so-called fundamental matrix N, obtained by summing Qk for all k (from 0 to ∞). It can be proven that N := ∑ k = 0 ∞ Q k = ( I t − Q ) − 1 , {\displaystyle N:=\sum _{k=0}^{\infty }Q^{k}=(I_{t}-Q)^{-1},} where It is the t-by-t identity matrix. The computation of this formula is the matrix equivalent of the geometric series of scalars, ∑ k = 0 ∞ q k = 1 1 − q {\displaystyle {\textstyle \sum }_{k=0}^{\infty }q^{k}={\tfrac {1}{1-q}}} . With the matrix N in hand, also other properties of the Markov chain are easy to obtain. === Expected number of steps before being absorbed === The expected number of steps before being absorbed in any absorbing state, when starting in transient state i can be computed via a sum over transient states. The value is given by the ith entry of the vector t := N 1 , {\displaystyle \mathbf {t} :=N\mathbf {1} ,} where 1 is a length-t column vector whose entries are all 1. === Absorbing probabilities === By induction, P k = [ Q k ( I t − Q k ) N R 0 I r ] . {\displaystyle P^{k}={\begin{bmatrix}Q^{k}&(I_{t}-Q^{k})NR\\\mathbf {0} &I_{r}\end{bmatrix}}.} The probability of eventually being absorbed in the absorbing state j when starting from transient state i is given by the (i,j)-entry of the matrix B := N R {\displaystyle B:=NR} . The number of columns of this matrix equals the number of absorbing states r. An approximation of those probabilities can also be obtained directly from the (i,j)-entry of P k {\displaystyle P^{k}} for a large enough value of k, when i is the index of a transient, and j the index of an absorbing state. This is because ( lim k → ∞ P k ) i , t + j = B i , j {\displaystyle \left(\lim _{k\to \infty }P^{k}\right)_{i,t+j}=B_{i,j}} . === Transient visiting probabilities === The probability of visiting transient state j when starting at a transient state i is the (i,j)-entry of the matrix H := ( N − I t ) ( N dg ) − 1 , {\displaystyle H:=(N-I_{t})(N_{\operatorname {dg} })^{-1},} where Ndg is the diagonal matrix with the same diagonal as N. === Variance on number of transient visits === The variance on the number of visits to a transient state j with starting at a transient state i (before being absorbed) is the (i,j)-entry of the matrix N 2 := N ( 2 N dg − I t ) − N sq , {\displaystyle N_{2}:=N(2N_{\operatorname {dg} }-I_{t})-N_{\operatorname {sq} },} where Nsq is the Hadamard product of N with itself (i.e. each entry of N is squared). === Variance on number of steps === The variance on the number of steps before being absorbed when starting in transient state i is the ith entry of the vector ( 2 N − I t ) t − t sq , {\displaystyle (2N-I_{t})\mathbf {t} -\mathbf {t} _{\operatorname {sq} },} where tsq is the Hadamard product of t with itself (i.e., as with Nsq, each entry of t is squared). == Examples == === String generation === Consider the process of repeatedly flipping a fair coin until the sequence (heads, tails, heads) appears. This process is modeled by an absorbing Markov chain with transition matrix P = [ 1 / 2 1 / 2 0 0 0 1 / 2 1 / 2 0 1 / 2 0 0 1 / 2 0 0 0 1 ] . {\displaystyle P={\begin{bmatrix}1/2&1/2&0&0\\0&1/2&1/2&0\\1/2&0&0&1/2\\0&0&0&1\end{bmatrix}}.} The first state represents the empty string, the second state the string "H", the third state the string "HT", and the fourth state the string "HTH". Although in reality, the coin flips cease after the string "HTH" is generated, the perspective of the absorbing Markov chain is that the process has transitioned into the absorbing state representing the string "HTH" and, therefore, cannot leave. For this absorbing Markov chain, the fundamental matrix is N = ( I − Q ) − 1 = ( [ 1 0 0 0 1 0 0 0 1 ] − [ 1 / 2 1 / 2 0 0 1 / 2 1 / 2 1 / 2 0 0 ] ) − 1 = [ 1 / 2 − 1 / 2 0 0 1 / 2 − 1 / 2 − 1 / 2 0 1 ] − 1 = [ 4 4 2 2 4 2 2 2 2 ] . {\displaystyle {\begin{aligned}N&=(I-Q)^{-1}=\left({\begin{bmatrix}1&0&0\\0&1&0\\0&0&1\end{bmatrix}}-{\begin{bmatrix}1/2&1/2&0\\0&1/2&1/2\\1/2&0&0\end{bmatrix}}\right)^{-1}\\[4pt]&={\begin{bmatrix}1/2&-1/2&0\\0&1/2&-1/2\\-1/2&0&1\end{bmatrix}}^{-1}={\begin{bmatrix}4&4&2\\2&4&2\\2&2&2\end{bmatrix}}.\end{aligned}}} The expected number of steps starting from each of the transient states is t = N 1 = [ 4 4 2 2 4 2 2 2 2 ] [ 1 1 1 ] = [ 10 8 6 ] . {\displaystyle \mathbf {t} =N\mathbf {1} ={\begin{bmatrix}4&4&2\\2&4&2\\2&2&2\end{bmatrix}}{\begin{bmatrix}1\\1\\1\end{bmatrix}}={\begin{bmatrix}10\\8\\6\end{bmatrix}}.} Therefore, the expected number of coin flips before observing the sequence (heads, tails, heads) is 10, the entry for the state representing the empty string. === Games of chance === Games based entirely on chance can be modeled by an absorbing Markov chain. A classic example of this is the ancient Indian board game Snakes and Ladders. The graph on the left plots the probability mass in the lone absorbing state that represents the final square as the transition matrix is raised to larger and larger powers. To determine the expected number of turns to complete the game, compute the vector t as described above and examine tstart, which is approximately 39.2. === Infectious disease testing === Infectious disease testing, either of blood products or in medical clinics, is often taught as an example of an absorbing Markov chain. The public U.S. Centers for Disease Control and Prevention (CDC) model for HIV and for hepatitis B, for example, illustrates the property that absorbing Markov chains can lead to the detection of disease, versus the loss of detection through other means. In the standard CDC model, the Markov chain has five states, a state in which the individual is uninfected, then a state with infected but undetectable virus, a state with detectable virus, and absorbing states of having quit/been lost from the clinic, or of having been detected (the goal). The typical rates of transition between the Markov states are the probability p per unit time of being infected with the virus, w for the rate of window period removal (time until virus is detectable), q for quit/loss rate from the system, and d for detection, assuming a typical rate λ {\displaystyle \lambda } at which the health system administers tests of the blood product or patients in question. It follows that we can "walk along" the Markov model to identify the overall probability of detection for a person starting as undetected, by multiplying the probabilities of transition to each next state of the model as: p ( p + q ) w ( w + q ) d ( d + q ) {\displaystyle {\frac {p}{(p+q)}}{\frac {w}{(w+q)}}{\frac {d}{(d+q)}}} . The subsequent total absolute number of false negative tests—the primary CDC concern—would then be the rate of tests, multiplied by the probability of reaching the infected but undetectable state, times the duration of staying in the infected undetectable state: p ( p + q ) 1 ( w + q ) λ {\displaystyle {\frac {p}{(p+q)}}{\frac {1}{(w+q)}}\lambda } .

  Read more →
• 

  Harrison White

  Harrison Colyar White (March 21, 1930 – May 18, 2024) was an American sociologist who was the Giddings Professor of Sociology at Columbia University. White played an influential role in the “Harvard Revolution” in social networks and the New York School of relational sociology. He is credited with the development of a number of mathematical models of social structure including vacancy chains and blockmodels. He has been a leader of a revolution in sociology that is still in process, using models of social structure that are based on patterns of relations instead of the attributes and attitudes of individuals. Among social network researchers, White is widely respected. For instance, at the 1997 International Network of Social Network Analysis conference, the organizer held a special “White Tie” event, dedicated to White. Social network researcher Emmanuel Lazega refers to him as both “Copernicus and Galileo” because he invented both the vision and the tools. The most comprehensive documentation of his theories can be found in the book Identity and Control, first published in 1992. A major rewrite of the book appeared in June 2008. In 2011, White received the W.E.B. DuBois Career of Distinguished Scholarship Award from the American Sociological Association, which honors "scholars who have shown outstanding commitment to the profession of sociology and whose cumulative work has contributed in important ways to the advancement of the discipline." Before his retirement to live in Tucson, Arizona, White was interested in sociolinguistics and business strategy as well as sociology. == Life and career == === Early years === White was born on March 21, 1930, in Washington, D.C. He had three siblings and his father was a doctor in the US Navy. Although moving around to different Naval bases throughout his adolescence, he considered himself Southern, and Nashville, TN to be his home. At the age of 15, he entered the Massachusetts Institute of Technology (MIT), receiving his undergraduate degree at 20 years of age; five years later, in 1955, he received a doctorate in theoretical physics, also from MIT with John C. Slater as his advisor. His dissertation was titled A quantum-mechanical calculation of inter-atomic force constants in copper. This was published in the Physical Review as "Atomic Force Constants of Copper from Feynman's Theorem" (1958). While at MIT he also took a course with the political scientist Karl Deutsch, who White credits with encouraging him to move toward the social sciences. === Princeton University === After receiving his PhD in theoretical physics, he received a Fellowship from the Ford Foundation to begin his second doctorate in sociology at Princeton University. His dissertation advisor was Marion J. Levy. White also worked with Wilbert Moore, Fred Stephan, and Frank W. Notestein while at Princeton. His cohort was very small, with only four or five other graduate students including David Matza, and Stanley Udy. At the same time, he took up a position as an operations analyst at the Operations Research Office, Johns Hopkins University from 1955 to 1956. During this period, he worked with Lee S. Christie on Queuing with Preemptive Priorities or with Breakdown, which was published in 1958. Christie previously worked alongside mathematical psychologist R. Duncan Luce in the Small Group Laboratory at MIT while White was completing his first PhD in physics also at MIT. While continuing his studies at Princeton, White also spent a year as a fellow at the Center for Advanced Study in the Behavioral Sciences, Stanford University, California where he met Harold Guetzkow. Guetzkow was a faculty member at the Carnegie Institute of Technology, known for his application of simulations to social behavior and long-time collaborator with many other pioneers in organization studies, including Herbert A. Simon, James March, and Richard Cyert. Upon meeting Simon through his mutual acquaintance with Guetzkow, White received an invitation to move from California to Pittsburgh to work as an assistant professor of Industrial Administration and Sociology at the Graduate School of Industrial Administration, Carnegie Institute of Technology (later Carnegie-Mellon University), where he stayed for a couple of years, between 1957 and 1959. In an interview, he claimed to have fought with the dean, Leyland Bock, to have the word "sociology" included in his title. It was also during his time at the Stanford Center for Advanced Study that White met his first wife, Cynthia A. Johnson, who was a graduate of Radcliffe College, where she had majored in art history. The couple's joint work on the French Impressionists, Canvases and Careers (1965) and “Institutional Changes in the French Painting World” (1964), originally grew out of a seminar on art in 1957 at the Center for Advanced Study led by Robert Wilson. White originally hoped to use sociometry to map the social structure of French art to predict shifts, but he had an epiphany that it was not social structure but institutional structure which explained the shift. It was also during these years that White, still a graduate student in sociology, wrote and published his first social scientific work, "Sleep: A Sociological Interpretation" in Acta Sociologica in 1960, together with Vilhelm Aubert, a Norwegian sociologist. This work was a phenomenological examination of sleep which attempted to "demonstrate that sleep was more than a straightforward biological activity... [but rather also] a social event". For his dissertation, White carried out empirical research on a research and development department in a manufacturing firm, consisting of interviews and a 110-item questionnaire with managers. He specifically used sociometric questions, which he used to model the "social structure" of relationships between various departments and teams in the organization. In May 1960 he submitted as his doctoral dissertation, titled Research and Development as a Pattern in Industrial Management: A Case Study in Institutionalisation and Uncertainty, earning a PhD in sociology from Princeton University. His first publication based on his dissertation was ''Management conflict and sociometric structure'' in the American Journal of Sociology. === University of Chicago === In 1959 James Coleman left the University of Chicago to found a new department of social relations at Johns Hopkins University, this left a vacancy open for a mathematical sociologist like White. He moved to Chicago to start working as an associate professor at the Department of Sociology. At that time, highly influential sociologists, such as Peter Blau, Mayer Zald, Elihu Katz, Everett Hughes, Erving Goffman were there. As Princeton only required one year in residence, and White took the opportunity to take positions at Johns Hopkins, Stanford, and Carnegie while still working on his dissertation, it was at Chicago that White credits as being his "real socialization in a way, into sociology." It was here that White advised his first two graduate students Joel H. Levine and Morris Friedell, both who went on to make contributions to social network analysis in sociology. While at the Center for Advanced Study, White began learning anthropology and became fascinated with kinship. During his stay at the University of Chicago White was able to finish An Anatomy of Kinship, published in 1963 within the Prentice-Hall series in Mathematical Analysis of Social Behavior, with James Coleman and James March as chief editors. The book received significant attention from many mathematical sociologists of the time, and contributed greatly to establish White as a model builder. === The Harvard Revolution === In 1963, White left Chicago to be an associate professor of sociology at the Harvard Department of Social Relations—the same department founded by Talcott Parsons and still heavily influenced by the structural-functionalist paradigm of Parsons. As White previously only taught graduate courses at Carnegie and Chicago, his first undergraduate course was An Introduction to Social Relations (see Influence) at Harvard, which became infamous among network analysts. As he "thought existing textbooks were grotesquely unscientific," the syllabus of the class was noted for including few readings by sociologists, and comparatively more readings by anthropologists, social psychologists, and historians. White was also a vocal critic of what he called the "attributes and attitudes" approach of Parsonsian sociology, and came to be the leader of what has been variously known as the “Harvard Revolution," the "Harvard breakthrough," or the "Harvard renaissance" in social networks. He worked closely with small group researchers George C. Homans and Robert F. Bales, which was largely compatible with his prior work in organizational research and his efforts to formalize network analysis. Overlapping White's early years, Charles Tilly, a graduate of the Harvard Department of Social

  Read more →
• 

  Random projection

  In mathematics and statistics, random projection is a technique used to reduce the dimensionality of a set of points which lie in Euclidean space. According to theoretical results, random projection preserves distances well, but empirical results are sparse. They have been applied to many natural language tasks under the name random indexing. == Dimensionality reduction == Dimensionality reduction, as the name suggests, is reducing the number of random variables using various mathematical methods from statistics and machine learning. Dimensionality reduction is often used to reduce the problem of managing and manipulating large data sets. Dimensionality reduction techniques generally use linear transformations in determining the intrinsic dimensionality of the manifold as well as extracting its principal directions. For this purpose there are various related techniques, including: principal component analysis, linear discriminant analysis, canonical correlation analysis, discrete cosine transform, random projection, etc. Random projection is a simple and computationally efficient way to reduce the dimensionality of data by trading a controlled amount of error for faster processing times and smaller model sizes. The dimensions and distribution of random projection matrices are controlled so as to approximately preserve the pairwise distances between any two samples of the dataset. == Method == The core idea behind random projection is given in the Johnson-Lindenstrauss lemma, which states that if points in a vector space are of sufficiently high dimension, then they may be projected into a suitable lower-dimensional space in a way which approximately preserves pairwise distances between the points with high probability. In random projection, the original d {\displaystyle d} -dimensional data is projected to a k {\displaystyle k} -dimensional subspace, by multiplying on the left by a random matrix R ∈ R k × d {\displaystyle R\in \mathbb {R} ^{k\times d}} . Using matrix notation: If X d × N {\displaystyle X_{d\times N}} is the original set of N d-dimensional observations, then X k × N R P = R k × d X d × N {\displaystyle X_{k\times N}^{RP}=R_{k\times d}X_{d\times N}} is the projection of the data onto a lower k-dimensional subspace. Random projection is computationally simple: form the random matrix "R" and project the d × N {\displaystyle d\times N} data matrix X onto K dimensions of order O ( d k N ) {\displaystyle O(dkN)} . If the data matrix X is sparse with about c nonzero entries per column, then the complexity of this operation is of order O ( c k N ) {\displaystyle O(ckN)} . === Orthogonal random projection === A unit vector can be orthogonally projected to a random subspace. Let u {\displaystyle u} be the original unit vector, and let v {\displaystyle v} be its projection. The norm-squared ‖ v ‖ 2 2 {\displaystyle \|v\|_{2}^{2}} has the same distribution as projecting a random point, uniformly sampled on the unit sphere, to its first k {\displaystyle k} coordinates. This is equivalent to sampling a random point in the multivariate gaussian distribution x ∼ N ( 0 , I d × d ) {\displaystyle x\sim {\mathcal {N}}(0,I_{d\times d})} , then normalizing it. Therefore, ‖ v ‖ 2 2 {\displaystyle \|v\|_{2}^{2}} has the same distribution as ∑ i = 1 k x i 2 ∑ i = 1 k x i 2 + ∑ i = k + 1 d x i 2 {\displaystyle {\frac {\sum _{i=1}^{k}x_{i}^{2}}{\sum _{i=1}^{k}x_{i}^{2}+\sum _{i=k+1}^{d}x_{i}^{2}}}} , which by the chi-squared construction of the Beta distribution, has distribution Beta ⁡ ( k / 2 , ( d − k ) / 2 ) {\displaystyle \operatorname {Beta} (k/2,(d-k)/2)} , with mean k / d {\displaystyle k/d} . We have a concentration inequality P r [ | ‖ v ‖ 2 − k d | ≥ ϵ k d ] ≤ 3 exp ⁡ ( − k ϵ 2 / 64 ) {\displaystyle Pr\left[\left|\|v\|_{2}-{\frac {k}{d}}\right|\geq \epsilon {\sqrt {\frac {k}{d}}}\right]\leq 3\exp \left(-k\epsilon ^{2}/64\right)} for any ϵ ∈ ( 0 , 1 ) {\displaystyle \epsilon \in (0,1)} . === Gaussian random projection === The random matrix R can be generated using a Gaussian distribution. The first row is a random unit vector uniformly chosen from S d − 1 {\displaystyle S^{d-1}} . The second row is a random unit vector from the space orthogonal to the first row, the third row is a random unit vector from the space orthogonal to the first two rows, and so on. In this way of choosing R, and the following properties are satisfied: Spherical symmetry: For any orthogonal matrix A ∈ O ( d ) {\displaystyle A\in O(d)} , RA and R have the same distribution. Orthogonality: The rows of R are orthogonal to each other. Normality: The rows of R are unit-length vectors. === More computationally efficient random projections === Achlioptas has shown that the random matrix can be sampled more efficiently. Either the full matrix can be sampled IID according to R i , j = 3 / k × { + 1 with probability 1 6 0 with probability 2 3 − 1 with probability 1 6 {\displaystyle R_{i,j}={\sqrt {3/k}}\times {\begin{cases}+1&{\text{with probability }}{\frac {1}{6}}\\0&{\text{with probability }}{\frac {2}{3}}\\-1&{\text{with probability }}{\frac {1}{6}}\end{cases}}} or the full matrix can be sampled IID according to R i , j = 1 / k × { + 1 with probability 1 2 − 1 with probability 1 2 {\displaystyle R_{i,j}={\sqrt {1/k}}\times {\begin{cases}+1&{\text{with probability }}{\frac {1}{2}}\\-1&{\text{with probability }}{\frac {1}{2}}\end{cases}}} Both are efficient for database applications because the computations can be performed using integer arithmetic. More related study is conducted in. It was later shown how to use integer arithmetic while making the distribution even sparser, having very few nonzeroes per column, in work on the Sparse JL Transform. This is advantageous since a sparse embedding matrix means being able to project the data to lower dimension even faster. === Random Projection with Quantization === Random projection can be further condensed by quantization (discretization), with 1-bit (sign random projection) or multi-bits. It is the building block of SimHash, RP tree, and other memory efficient estimation and learning methods. == Large quasiorthogonal bases == The Johnson-Lindenstrauss lemma states that large sets of vectors in a high-dimensional space can be linearly mapped in a space of much lower (but still high) dimension n with approximate preservation of distances. One of the explanations of this effect is the exponentially high quasiorthogonal dimension of n-dimensional Euclidean space. There are exponentially large (in dimension n) sets of almost orthogonal vectors (with small value of inner products) in n–dimensional Euclidean space. This observation is useful in indexing of high-dimensional data. Quasiorthogonality of large random sets is important for methods of random approximation in machine learning. In high dimensions, exponentially large numbers of randomly and independently chosen vectors from equidistribution on a sphere (and from many other distributions) are almost orthogonal with probability close to one. This implies that in order to represent an element of such a high-dimensional space by linear combinations of randomly and independently chosen vectors, it may often be necessary to generate samples of exponentially large length if we use bounded coefficients in linear combinations. On the other hand, if coefficients with arbitrarily large values are allowed, the number of randomly generated elements that are sufficient for approximation is even less than dimension of the data space. == Implementations == RandPro - An R package for random projection sklearn.random_projection - A module for random projection from the scikit-learn Python library Weka implementation [1]

  Read more →
• 

  Intelligent agent

  In artificial intelligence, an intelligent agent is an entity that perceives its environment, takes actions autonomously to achieve goals, and may improve its performance through machine learning or by acquiring knowledge. AI textbooks define artificial intelligence as the "study and design of intelligent agents," emphasizing that goal-directed behavior is central to intelligence. A specialized subset of intelligent agents, agentic AI (also known as an AI agent or simply agent), expands this concept by proactively pursuing goals, making decisions, and taking actions over extended periods. Intelligent agents can range from simple to highly complex. A basic thermostat or control system is considered an intelligent agent, as is a human being, or any other system that meets the same criteria—such as a firm, a state, or a biome. Intelligent agents operate based on an objective function, which encapsulates their goals. They are designed to create and execute plans that maximize the expected value of this function upon completion. For example, a reinforcement learning agent has a reward function, which allows programmers to shape its desired behavior. Similarly, an evolutionary algorithm's behavior is guided by a fitness function. Intelligent agents in artificial intelligence are closely related to agents in economics, and versions of the intelligent agent paradigm are studied in cognitive science, ethics, and the philosophy of practical reason, as well as in many interdisciplinary socio-cognitive modeling and computer social simulations. Intelligent agents are often described schematically as abstract functional systems similar to computer programs . To distinguish theoretical models from real-world implementations, abstract descriptions of intelligent agents are called abstract intelligent agents. Intelligent agents are also closely related to software agents—autonomous computer programs that carry out tasks on behalf of users. They are also referred to using a term borrowed from economics: a "rational agent". == Intelligent agents as the foundation of AI == The concept of intelligent agents provides a foundational lens through which to define and understand artificial intelligence. For instance, the influential textbook Artificial Intelligence: A Modern Approach (Russell & Norvig) describes: Agent: Anything that perceives its environment (using sensors) and acts upon it (using actuators). E.g., a robot with cameras and wheels, or a software program that reads data and makes recommendations. Rational Agent: An agent that strives to achieve the best possible outcome based on its knowledge and past experiences. "Best" is defined by a performance measure – a way of evaluating how well the agent is doing. Artificial Intelligence (as a field): The study and creation of these rational agents. Other researchers and definitions build upon this foundation. Padgham & Winikoff emphasize that intelligent agents should react to changes in their environment in a timely way, proactively pursue goals, and be flexible and robust (able to handle unexpected situations). Some also suggest that ideal agents should be "rational" in the economic sense (making optimal choices) and capable of complex reasoning, like having beliefs, desires, and intentions (BDI model). Kaplan and Haenlein offer a similar definition, focusing on a system's ability to understand external data, learn from that data, and use what is learned to achieve goals through flexible adaptation. Defining AI in terms of intelligent agents offers several key advantages: Avoids Philosophical Debates: It sidesteps arguments about whether AI is "truly" intelligent or conscious, like those raised by the Turing test or Searle's Chinese Room. It focuses on behavior and goal achievement, not on replicating human thought. Objective Testing: It provides a clear, scientific way to evaluate AI systems. Researchers can compare different approaches by measuring how well they maximize a specific "goal function" (or objective function). This allows for direct comparison and combination of techniques. Interdisciplinary Communication: It creates a common language for AI researchers to collaborate with other fields like mathematical optimization and economics, which also use concepts like "goals" and "rational agents." == Objective function == An objective function (or goal function) specifies the goals of an intelligent agent. An agent is deemed more intelligent if it consistently selects actions that yield outcomes better aligned with its objective function. In effect, the objective function serves as a measure of success. The objective function may be: Simple: For example, in a game of Go, the objective function might assign a value of 1 for a win and 0 for a loss. Complex: It might require the agent to evaluate and learn from past actions, adapting its behavior based on patterns that have proven effective. The objective function encapsulates all of the goals the agent is designed to achieve. For rational agents, it also incorporates the trade-offs between potentially conflicting goals. For instance, a self-driving car's objective function might balance factors such as safety, speed, and passenger comfort. Different terms are used to describe this concept, depending on the context. These include: Utility function: Often used in economics and decision theory, representing the desirability of a state. Objective function: A general term used in optimization. Loss function: Typically used in machine learning, where the goal is to minimize the loss (error). Reward Function: Used in reinforcement learning. Fitness Function: Used in evolutionary systems. Goals, and therefore the objective function, can be: Explicitly defined: Programmed directly into the agent. Induced: Learned or evolved over time. In reinforcement learning, a "reward function" provides feedback, encouraging desired behaviors and discouraging undesirable ones. The agent learns to maximize its cumulative reward. In evolutionary systems, a "fitness function" determines which agents are more likely to reproduce. This is analogous to natural selection, where organisms evolve to maximize their chances of survival and reproduction. Some AI systems, such as nearest-neighbor, reason by analogy rather than being explicitly goal-driven. However, even these systems can have goals implicitly defined within their training data. Such systems can still be benchmarked by framing the non-goal system as one whose "goal" is to accomplish its narrow classification task. Systems not traditionally considered agents, like knowledge-representation systems, are sometimes included in the paradigm by framing them as agents with a goal of, for example, answering questions accurately. Here, the concept of an "action" is extended to encompass the "act" of providing an answer. As a further extension, mimicry-driven systems can be framed as agents optimizing a "goal function" based on how closely the agent mimics the desired behavior. In generative adversarial networks (GANs) of the 2010s, an "encoder"/"generator" component attempts to mimic and improvise human text composition. The generator tries to maximize a function representing how well it can fool an antagonistic "predictor"/"discriminator" component. While symbolic AI systems often use an explicit goal function, the paradigm also applies to neural networks and evolutionary computing. Reinforcement learning can generate intelligent agents that appear to act in ways intended to maximize a "reward function". Sometimes, instead of setting the reward function directly equal to the desired benchmark evaluation function, machine learning programmers use reward shaping to initially give the machine rewards for incremental progress. Yann LeCun stated in 2018, "Most of the learning algorithms that people have come up with essentially consist of minimizing some objective function." AlphaZero chess had a simple objective function: +1 point for each win, and -1 point for each loss. A self-driving car's objective function would be more complex. Evolutionary computing can evolve intelligent agents that appear to act in ways intended to maximize a "fitness function" influencing how many descendants each agent is allowed to leave. The mathematical formalism of AIXI was proposed as a maximally intelligent agent in this paradigm. However, AIXI is uncomputable. In the real world, an intelligent agent is constrained by finite time and hardware resources, and scientists compete to produce algorithms that achieve progressively higher scores on benchmark tests with existing hardware. == Agent function == An intelligent agent's behavior can be described mathematically by an agent function. This function determines what the agent does based on what it has seen. A percept refers to the agent's sensory inputs at a single point in time. For example, a self-driving car's percepts might include camera images, lidar data, GPS coordinates, and speed r

  Read more →
• 

  Quadratic classifier

  In statistics, a quadratic classifier is a statistical classifier that uses a quadratic decision surface to separate measurements of two or more classes of objects or events. It is a more general version of the linear classifier. == The classification problem == Statistical classification considers a set of vectors of observations x of an object or event, each of which has a known type y. This set is referred to as the training set. The problem is then to determine, for a given new observation vector, what the best class should be. For a quadratic classifier, the correct solution is assumed to be quadratic in the measurements, so y will be decided based on x T A x + b T x + c {\displaystyle \mathbf {x^{T}Ax} +\mathbf {b^{T}x} +c} In the special case where each observation consists of two measurements, this means that the surfaces separating the classes will be conic sections (i.e., either a line, a circle or ellipse, a parabola or a hyperbola). In this sense, we can state that a quadratic model is a generalization of the linear model, and its use is justified by the desire to extend the classifier's ability to represent more complex separating surfaces. == Quadratic discriminant analysis == Quadratic discriminant analysis (QDA) is closely related to linear discriminant analysis (LDA), where it is assumed that the measurements from each class are normally distributed. Unlike LDA however, in QDA there is no assumption that the covariance of each of the classes is identical. When the normality assumption is true, the best possible test for the hypothesis that a given measurement is from a given class is the likelihood ratio test. Suppose there are only two groups, with means μ 0 , μ 1 {\displaystyle \mu _{0},\mu _{1}} and covariance matrices Σ 0 , Σ 1 {\displaystyle \Sigma _{0},\Sigma _{1}} corresponding to y = 0 {\displaystyle y=0} and y = 1 {\displaystyle y=1} respectively. Then the likelihood ratio is given by Likelihood ratio = | 2 π Σ 1 | − 1 exp ⁡ ( − 1 2 ( x − μ 1 ) T Σ 1 − 1 ( x − μ 1 ) ) | 2 π Σ 0 | − 1 exp ⁡ ( − 1 2 ( x − μ 0 ) T Σ 0 − 1 ( x − μ 0 ) ) < t {\displaystyle {\text{Likelihood ratio}}={\frac {{\sqrt {|2\pi \Sigma _{1}|}}^{-1}\exp \left(-{\frac {1}{2}}(\mathbf {x} -{\boldsymbol {\mu }}_{1})^{T}\Sigma _{1}^{-1}(\mathbf {x} -{\boldsymbol {\mu }}_{1})\right)}{{\sqrt {|2\pi \Sigma _{0}|}}^{-1}\exp \left(-{\frac {1}{2}}(\mathbf {x} -{\boldsymbol {\mu }}_{0})^{T}\Sigma _{0}^{-1}(\mathbf {x} -{\boldsymbol {\mu }}_{0})\right)}} Read more →

• 

  Automated Pain Recognition

  Automated Pain Recognition (APR) is a method for objectively measuring pain and at the same time represents an interdisciplinary research area that comprises elements of medicine, psychology, psychobiology, and computer science. The focus is on computer-aided objective recognition of pain, implemented on the basis of machine learning. Automated pain recognition allows for the valid, reliable detection and monitoring of pain in people who are unable to communicate verbally. The underlying machine learning processes are trained and validated in advance by means of unimodal or multimodal body signals. Signals used to detect pain may include facial expressions or gestures and may also be of a (psycho-)physiological or paralinguistic nature. To date, the focus has been on identifying pain intensity, but visionary efforts are also being made to recognize the quality, site, and temporal course of pain. However, the clinical implementation of this approach is a controversial topic in the field of pain research. Critics of automated pain recognition argue that pain diagnosis can only be performed subjectively by humans. == Background == Pain diagnosis under conditions where verbal reporting is restricted - such as in verbally and/or cognitively impaired people or in patients who are sedated or mechanically ventilated - is based on behavioral observations by trained professionals. However, all known observation procedures (e.g., Zurich Observation Pain Assessment (ZOPA)); Pain Assessment in Advanced Dementia Scale (PAINAD) require a great deal of specialist expertise. These procedures can be made more difficult by perception- and interpretation-related misjudgments on the part of the observer. With regard to the differences in design, methodology, evaluation sample, and conceptualization of the phenomenon of pain, it is difficult to compare the quality criteria of the various tools. Even if trained personnel could theoretically record pain intensity several times a day using observation instruments, it would not be possible to measure it every minute or second. In this respect, the goal of automated pain recognition is to use valid, robust pain response patterns that can be recorded multimodally for a temporally dynamic, high-resolution, automated pain intensity recognition system. == Procedure == For automated pain recognition, pain-relevant parameters are usually recorded using non-invasive sensor technology, which captures data on the (physical) responses of the person in pain. This can be achieved with camera technology that captures facial expressions, gestures, or posture, while audio sensors record paralinguistic features. (Psycho-)physiological information such as muscle tone and heart rate can be collected via biopotential sensors (electrodes). Pain recognition requires the extraction of meaningful characteristics or patterns from the data collected. This is achieved using machine learning techniques that are able to provide an assessment of the pain after training (learning), e.g., "no pain," "mild pain," or "severe pain." == Parameters == Although the phenomenon of pain comprises different components (sensory discriminative, affective (emotional), cognitive, vegetative, and (psycho-)motor), automated pain recognition currently relies on the measurable parameters of pain responses. These can be divided roughly into the two main categories of "physiological responses" and "behavioral responses". === Physiological responses === In humans, pain almost always initiates autonomic nervous processes that are reflected measurably in various physiological signals. ==== Physiological signals ==== Measurements can include electrodermal activity (EDA, also skin conductance), electromyography (EMG), electrocardiogram (ECG), blood volume pulse (BVP), electroencephalogram (EEG), respiration, and body temperature, which are regulatory mechanisms of the sympathetic and parasympathetic systems. Physiological signals are mainly recorded using special non-invasive surface electrodes (for EDA, EMG, ECG, and EEG), a blood volume pulse sensor (BVP), a respiratory belt (respiration), and a thermal sensor (body temperature). Endocrinological and immunological parameters can also be recorded, but this requires measures that are somewhat invasive (e.g., blood sampling). === Behavioral responses === Behavioral responses to pain fulfil two functions: protection of the body (e.g., through protective reflexes) and external communication of the pain (e.g., as a cry for help). The responses are particularly evident in facial expressions, gestures, and paralinguistic features. ==== Facial expressions ==== Behavioral signals captured comprise facial expression patterns (expressive behavior), which are measured with the aid of video signals. Facial expression recognition is based on the everyday clinical observation that pain often manifests itself in the patient's facial expressions but that this is not necessarily always the case, since facial expressions can be inhibited through self-control. Despite the possibility that facial expressions may be influenced consciously, facial expression behavior represents an essential source of information for pain diagnosis and is thus also a source of information for automatic pain recognition. One advantage of video-based facial expression recognition is the contact-free measurement of the face, provided that it can be captured on video, which is not possible in every position (e.g., lying face down) or may be limited by bandages covering the face. Facial expression analysis relies on rapid, spontaneous, and temporary changes in neuromuscular activity that lead to visually detectable changes in the face. ==== Gestures ==== Gestures are also captured predominantly using non-contact camera technology. Motor pain responses vary and are strongly dependent on the type and cause of the pain. They range from abrupt protective reflexes (e.g., spontaneous retraction of extremities or doubling up) to agitation (pathological restlessness) and avoidance behavior (hesitant, cautious movements). ==== Paralinguistic features of language ==== Among other things, pain leads to nonverbal linguistic behavior that manifests itself in sounds such as sighing, gasping, moaning, whining, etc. Paralinguistic features are usually recorded using highly sensitive microphones. == Algorithms == After the recording, pre-processing (e.g., filtering), and extraction of relevant features, an optional information fusion can be performed. During this process, modalities from different signal sources are merged to generate new or more precise knowledge. The pain is classified using machine learning processes. The method chosen has a significant influence on the recognition rate and depends greatly on the quality and granularity of the underlying data. Similar to the field of affective computing, the following classifiers are currently being used: Support Vector Machine (SVM): The goal of an SVM is to find a clearly defined optimal hyperplane with the greatest minimal distance to two (or more) classes to be separated. The hyperplane acts as a decision function for classifying an unknown pattern. Random Forest (RF): RF is based on the composition of random, uncorrelated decision trees. An unknown pattern is judged individually by each tree and assigned to a class. The final classification of the patterns by the RF is then based on a majority decision. k-Nearest Neighbors (k-NN): The k-NN algorithm classifies an unknown object using the class label that most commonly classifies the k neighbors closest to it. Its neighbors are determined using a selected similarity measure (e.g., Euclidean distance, Jaccard coefficient, etc.). Artificial neural networks (ANNs): ANNs are inspired by biological neural networks and model their organizational principles and processes in a very simplified manner. Class patterns are learned by adjusting the weights of the individual neuronal connections. == Databases == In order to classify pain in a valid manner, it is necessary to create representative, reliable, and valid pain databases that are available to the machine learner for training. An ideal database would be sufficiently large and would consist of natural (not experimental), high-quality pain responses. However, natural responses are difficult to record and can only be obtained to a limited extent; in most cases they are characterized by suboptimal quality. The databases currently available therefore contain experimental or quasi-experimental pain responses, and each database is based on a different pain model. The following list shows a selection of the most relevant pain databases (last updated: April 2020): UNBC-McMaster Shoulder Pain BioVid Heat Pain EmoPain SenseEmotion X-ITE Pain

  Read more →
• 

  NSynth

  NSynth (a portmanteau of "Neural Synthesis") is a WaveNet-based autoencoder for synthesizing audio, outlined in a paper in April 2017. == Overview == The model generates sounds through a neural network based synthesis, employing a WaveNet-style autoencoder to learn its own temporal embeddings from four different sounds. Google then released an open source hardware interface for the algorithm called NSynth Super, used by notable musicians such as Grimes and YACHT to generate experimental music using artificial intelligence. The research and development of the algorithm was part of a collaboration between Google Brain, Magenta and DeepMind. == Technology == === Dataset === The NSynth dataset is composed of 305,979 one-shot instrumental notes featuring a unique pitch, timbre, and envelope, sampled from 1,006 instruments from commercial sample libraries. For each instrument the dataset contains four-second 16 kHz audio snippets by ranging over every pitch of a standard MIDI piano, as well as five different velocities. The dataset is made available under a Creative Commons Attribution 4.0 International (CC BY 4.0) license. === Machine learning model === A spectral autoencoder model and a WaveNet autoencoder model are publicly available on GitHub. The baseline model uses a spectrogram with fft_size 1024 and hop_size 256, MSE loss on the magnitudes, and the Griffin-Lim algorithm for reconstruction. The WaveNet model trains on mu-law encoded waveform chunks of size 6144. It learns embeddings with 16 dimensions that are downsampled by 512 in time. == NSynth Super == In 2018 Google released a hardware interface for the NSynth algorithm, called NSynth Super, designed to provide an accessible physical interface to the algorithm for musicians to use in their artistic production. Design files, source code and internal components are released under an open source Apache License 2.0, enabling hobbyists and musicians to freely build and use the instrument. At the core of the NSynth Super there is a Raspberry Pi, extended with a custom printed circuit board to accommodate the interface elements. == Influence == Despite not being publicly available as a commercial product, NSynth Super has been used by notable artists, including Grimes and YACHT. Grimes reported using the instrument in her 2020 studio album Miss Anthropocene. YACHT announced an extensive use of NSynth Super in their album Chain Tripping. Claire L. Evans compared the potential influence of the instrument to the Roland TR-808. The NSynth Super design was honored with a D&AD Yellow Pencil award in 2018.

  Read more →
• 

  Cloem

  Cloem is a company based in Cannes, France, which applies natural language processing (NLP) technologies to assist patent applicants in creating variants of patent claims, called "cloems". According to the company, these "computer-generated claims can be published to keep potential competitors from attempting to file adjacent patent claims." == Technology == According to Cloem, dictionaries, ontologies and proprietary claim-drafting algorithms are used to draft alternative claims based on a client's original set of claims. In particular, the original set of claims is subject to various permutations and linguistic manipulations "by considering alternative definitions for terms as well as “synonyms, hyponyms, hyperonyms, meronyms, holonyms, and antonyms.”" == Possible uses == Cloem can optionally publish one or more created texts, as electronic publications or as paper-printed publications. These can potentially serve – through a defensive publication – as prior art to prevent another party for obtaining a patent on the subject-matter at stake. In other words, after an initial patent filing, an "improvement" patent (adjacent invention) can be applied for by another party, such as a competitor. By publishing variants of a patent claim, the risk of adverse patenting may potentially be decreased (improvement inventions may no longer be patentable). Cloems may also be potentially patentable. One of the issues of patentability, however, is that only a natural person can be a listed as an inventor on a patent. Since cloems are produced by a computer based on a person's input, it is not clear if the computer or the person is the inventor. The inventorship of Cloem texts is an open question.

  Read more →
• 

  Types of artificial neural networks

  Types of neural networks (NN) include a family of techniques. The simplest types have static components, including number of units, number of layers, unit weights and topology. Dynamic NNs evolve via learning. Some types allow/require learning to be "supervised" by the operator, while others operate independently. Some types operate purely in hardware, while others are purely software and run on general purpose computers. The main types are: Transformers: these use attention to analyze every token in the input stream against every other token in the stream. That technique has enabled neural networks to reach the general public via chatbots, code generators and many other forms. Convolutional neural networks (CNN): a FNN that uses kernels and regularization to evade problems in prior generations of NNs. They are typically used to analyze visual and other two-dimensional data. Generative adversarial networks set networks (of varying structure) against each other, each trying to push the other(s) to produce better results such as winning a game or to deceive the opponent about the authenticity of an input. == Feedforward == In feedforward neural networks the information moves from the input to output directly in every layer. There can be hidden layers with or without cycles/loops to sequence inputs. Feedforward networks can be constructed with various types of units, such as binary McCulloch–Pitts neurons, the simplest of which is the perceptron. Continuous neurons, frequently with sigmoidal activation, are used in the context of backpropagation. == Group method of data handling == The Group Method of Data Handling (GMDH) features fully automatic structural and parametric model optimization. The node activation functions are Kolmogorov–Gabor polynomials that permit additions and multiplications. It uses a deep multilayer perceptron with eight layers. It is a supervised learning network that grows layer by layer, where each layer is trained by regression analysis. Useless items are detected using a validation set, and pruned through regularization. The size and depth of the resulting network depends on the task. == Autoencoder == An autoencoder, autoassociator or Diabolo network is similar to the multilayer perceptron (MLP) – with an input layer, an output layer and one or more hidden layers connecting them. However, the output layer has the same number of units as the input layer. Its purpose is to reconstruct its own inputs (instead of emitting a target value). Therefore, autoencoders are unsupervised learning models. An autoencoder is used for unsupervised learning of efficient codings, typically for the purpose of dimensionality reduction and for learning generative models of data. == Probabilistic == A probabilistic neural network (PNN) is a four-layer feedforward neural network. The layers are Input, hidden pattern, hidden summation, and output. In the PNN algorithm, the parent probability distribution function (PDF) of each class is approximated by a Parzen window and a non-parametric function. Then, using PDF of each class, the class probability of a new input is estimated and Bayes’ rule is employed to allocate it to the class with the highest posterior probability. It was derived from the Bayesian network and a statistical algorithm called Kernel Fisher discriminant analysis. It is used for classification and pattern recognition. == Time delay == A time delay neural network (TDNN) is a feedforward architecture for sequential data that recognizes features independent of sequence position. In order to achieve time-shift invariance, delays are added to the input so that multiple data points (points in time) are analyzed together. It usually forms part of a larger pattern recognition system. It has been implemented using a perceptron network whose connection weights were trained with back propagation (supervised learning). == Convolutional == A convolutional neural network (CNN, or ConvNet or shift invariant or space invariant) is a class of deep network, composed of one or more convolutional layers with fully connected layers (matching those in typical ANNs) on top. It uses tied weights and pooling layers. In particular, max-pooling. It is often structured via Fukushima's convolutional architecture. They are variations of multilayer perceptrons that use minimal preprocessing. This architecture allows CNNs to take advantage of the 2D structure of input data. Its unit connectivity pattern is inspired by the organization of the visual cortex. Units respond to stimuli in a restricted region of space known as the receptive field. Receptive fields partially overlap, over-covering the entire visual field. Unit response can be approximated mathematically by a convolution operation. CNNs are suitable for processing visual and other two-dimensional data. They have shown superior results in both image and speech applications. They can be trained with standard backpropagation. CNNs are easier to train than other regular, deep, feed-forward neural networks and have many fewer parameters to estimate. Capsule Neural Networks (CapsNet) add structures called capsules to a CNN and reuse output from several capsules to form more stable (with respect to various perturbations) representations. Examples of applications in computer vision include DeepDream and robot navigation. They have wide applications in image and video recognition, recommender systems and natural language processing. == Deep stacking network == A deep stacking network (DSN) (deep convex network) is based on a hierarchy of blocks of simplified neural network modules. It was introduced in 2011 by Deng and Yu. It formulates the learning as a convex optimization problem with a closed-form solution, emphasizing the mechanism's similarity to stacked generalization. Each DSN block is a simple module that is easy to train by itself in a supervised fashion without backpropagation for the entire blocks. Each block consists of a simplified multi-layer perceptron (MLP) with a single hidden layer. The hidden layer h has logistic sigmoidal units, and the output layer has linear units. Connections between these layers are represented by weight matrix U; input-to-hidden-layer connections have weight matrix W. Target vectors t form the columns of matrix T, and the input data vectors x form the columns of matrix X. The matrix of hidden units is H = σ ( W T X ) {\displaystyle {\boldsymbol {H}}=\sigma ({\boldsymbol {W}}^{T}{\boldsymbol {X}})} . Modules are trained in order, so lower-layer weights W are known at each stage. The function performs the element-wise logistic sigmoid operation. Each block estimates the same final label class y, and its estimate is concatenated with original input X to form the expanded input for the next block. Thus, the input to the first block contains the original data only, while downstream blocks' input adds the output of preceding blocks. Then learning the upper-layer weight matrix U given other weights in the network can be formulated as a convex optimization problem: min U T f = ‖ U T H − T ‖ F 2 , {\displaystyle \min _{U^{T}}f=\|{\boldsymbol {U}}^{T}{\boldsymbol {H}}-{\boldsymbol {T}}\|_{F}^{2},} which has a closed-form solution. Unlike other deep architectures, such as DBNs, the goal is not to discover the transformed feature representation. The structure of the hierarchy of this kind of architecture makes parallel learning straightforward, as a batch-mode optimization problem. In purely discriminative tasks, DSNs outperform conventional DBNs. === Tensor deep stacking networks === This architecture is a DSN extension. It offers two important improvements: it uses higher-order information from covariance statistics, and it transforms the non-convex problem of a lower-layer to a convex sub-problem of an upper-layer. TDSNs use covariance statistics in a bilinear mapping from each of two distinct sets of hidden units in the same layer to predictions, via a third-order tensor. While parallelization and scalability are not considered seriously in conventional DNNs, all learning for DSNs and TDSNs is done in batch mode, to allow parallelization. Parallelization allows scaling the design to larger (deeper) architectures and data sets. The basic architecture is suitable for diverse tasks such as classification and regression. == Physics-informed == Such a neural network is designed for the numerical solution of mathematical equations, such as differential, integral, delay, fractional and others. As input parameters, PINN accepts variables (spatial, temporal, and others), transmits them through the network block. At the output, it produces an approximate solution and substitutes it into the mathematical model, considering the initial and boundary conditions. If the solution does not satisfy the required accuracy, one uses the backpropagation and rectify the solution. Besides PINN, other architectures have been developed to produce surrogate models for scientific comput

  Read more →
• 

  Vladimir Batagelj

  Vladimir Batagelj (born June 14, 1948 in Idrija, Yugoslavia) is a Slovenian mathematician and an emeritus professor of mathematics at the University of Ljubljana. He is known for his work in discrete mathematics and combinatorial optimization, particularly analysis of social networks and other large networks (blockmodeling). == Education and career == Vladimir Batagelj completed his Ph.D. at the University of Ljubljana in 1986 under the direction of Tomaž Pisanski. He stayed at the University of Ljubljana as a professor until his retirement, where he was a professor of sociology and statistics, while also being a chair of the Department of Sociology of the Faculty of Social Sciences. As visiting professor, he was taught at the University of Pittsburgh (1990-91) and at the University of Konstanz (2002). He was also a member of editorial boards of two journals: Informatica and Journal of Social Structure. His work has been cited over 11000 times. His book Exploratory Social Network Analysis with Pajek on blockmodeling, coauthored with Wouter de Nooy and Andrej Mrvar, is Batagelj's most cited work and has over 3300 citations. The book was translated into Chinese and Japanese. The revised and expanded third edition has been published by Cambridge University Press. In 1975, 11 years before completing his PhD, Batagelj published a solo paper in Communications of the ACM. Batagelj authored more than 20 textbooks in Slovenian, covering topics like TeX, combinatorics and discrete mathematics. He has also written extensively in the Slovenian popular science journal Presek. Batagelj has advised 9 Ph.D. students. == Pajek == Batagelj is particularly known for his work on Pajek, a freely available software for analysis and visualization of large networks. He began work on Pajek in 1996 with Andrej Mrvar, who was then his PhD student. == Awards and honors == First prizes for contributions (with Andrej Mrvar) to Graph Drawing Contests in years: 1995, 1996, 1997, 1998, 1999, 2000 and 2005 / Graph Drawing Hall of Fame. In 2007 the book Generalized blockmodeling was awarded the Harrison White Outstanding Book Award by the Mathematical Sociology Section of American Sociological Association In 2007 he was awarded (together with Anuška Ferligoj) the Simmel Award by INSNA. In 2013, Vladimir Batagelj and Andrej Mrvar received the INSNA's William D. Richards Software award for their work on Pajek. == Selected bibliography == Vladimir Batagelj, Social Network Analysis, Large-Scale [1]. in R.A. Meyers, ed., Encyclopedia of Complexity and Systems Science, Springer 2009: 8245–8265. Vladimir Batagelj, Complex Networks, Visualization of [2]. in R.A. Meyers, ed., Encyclopedia of Complexity and Systems Science, Springer 2009: 1253–1268. Wouter de Nooy, Andrej Mrvar, Vladimir Batagelj, Mark Granovetter (Series Editor), Exploratory Social Network Analysis with Pajek (Structural Analysis in the Social Sciences), Cambridge University Press 2005 (ISBN 0-521-60262-9). ESNA in Japanese, TDU, 2010. Patrick Doreian, Vladimir Batagelj, Anuška Ferligoj, Mark Granovetter (Series Editor), Generalized Blockmodeling (Structural Analysis in the Social Sciences), Cambridge University Press 2004 (ISBN 0-521-84085-6)

  Read more →
• 

  Radial basis function network

  In the field of mathematical modeling, a radial basis function network is an artificial neural network that uses radial basis functions as activation functions. The output of the network is a linear combination of radial basis functions of the inputs and neuron parameters. Radial basis function networks have many uses, including function approximation, time series prediction, classification, and system control. They were first formulated in a 1988 paper by Broomhead and Lowe, both researchers at the Royal Signals and Radar Establishment. == Network architecture == Radial basis function (RBF) networks typically have three layers: an input layer, a hidden layer with a non-linear RBF activation function and a linear output layer. The input can be modeled as a vector of real numbers x ∈ R n {\displaystyle \mathbf {x} \in \mathbb {R} ^{n}} . The output of the network is then a scalar function of the input vector, φ : R n → R {\displaystyle \varphi :\mathbb {R} ^{n}\to \mathbb {R} } , and is given by φ ( x ) = ∑ i = 1 N a i ρ ( | | x − c i | | ) {\displaystyle \varphi (\mathbf {x} )=\sum _{i=1}^{N}a_{i}\rho (||\mathbf {x} -\mathbf {c} _{i}||)} where N {\displaystyle N} is the number of neurons in the hidden layer, c i {\displaystyle \mathbf {c} _{i}} is the center vector for neuron i {\displaystyle i} , and a i {\displaystyle a_{i}} is the weight of neuron i {\displaystyle i} in the linear output neuron. Functions that depend only on the distance from a center vector are radially symmetric about that vector, hence the name radial basis function. In the basic form, all inputs are connected to each hidden neuron. The norm is typically taken to be the Euclidean distance (although the Mahalanobis distance appears to perform better with pattern recognition) and the radial basis function is commonly taken to be Gaussian ρ ( ‖ x − c i ‖ ) = exp ⁡ [ − β i ‖ x − c i ‖ 2 ] {\displaystyle \rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}=\exp \left[-\beta _{i}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert ^{2}\right]} . The Gaussian basis functions are local to the center vector in the sense that lim | | x | | → ∞ ρ ( ‖ x − c i ‖ ) = 0 {\displaystyle \lim _{||x||\to \infty }\rho (\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert )=0} i.e. changing parameters of one neuron has only a small effect for input values that are far away from the center of that neuron. Given certain mild conditions on the shape of the activation function, RBF networks are universal approximators on a compact subset of R n {\displaystyle \mathbb {R} ^{n}} . This means that an RBF network with enough hidden neurons can approximate any continuous function on a closed, bounded set with arbitrary precision. The parameters a i {\displaystyle a_{i}} , c i {\displaystyle \mathbf {c} _{i}} , and β i {\displaystyle \beta _{i}} are determined in a manner that optimizes the fit between φ {\displaystyle \varphi } and the data. === Normalization === ==== Normalized architecture ==== In addition to the above unnormalized architecture, RBF networks can be normalized. In this case the mapping is φ ( x ) = d e f ∑ i = 1 N a i ρ ( ‖ x − c i ‖ ) ∑ i = 1 N ρ ( ‖ x − c i ‖ ) = ∑ i = 1 N a i u ( ‖ x − c i ‖ ) {\displaystyle \varphi (\mathbf {x} )\ {\stackrel {\mathrm {def} }{=}}\ {\frac {\sum _{i=1}^{N}a_{i}\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}}{\sum _{i=1}^{N}\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}}}=\sum _{i=1}^{N}a_{i}u{\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}} where u ( ‖ x − c i ‖ ) = d e f ρ ( ‖ x − c i ‖ ) ∑ j = 1 N ρ ( ‖ x − c j ‖ ) {\displaystyle u{\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}\ {\stackrel {\mathrm {def} }{=}}\ {\frac {\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}}{\sum _{j=1}^{N}\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{j}\right\Vert {\big )}}}} is known as a normalized radial basis function. ==== Theoretical motivation for normalization ==== There is theoretical justification for this architecture in the case of stochastic data flow. Assume a stochastic kernel approximation for the joint probability density P ( x ∧ y ) = 1 N ∑ i = 1 N ρ ( ‖ x − c i ‖ ) σ ( | y − e i | ) {\displaystyle P\left(\mathbf {x} \land y\right)={1 \over N}\sum _{i=1}^{N}\,\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}\,\sigma {\big (}\left\vert y-e_{i}\right\vert {\big )}} where the weights c i {\displaystyle \mathbf {c} _{i}} and e i {\displaystyle e_{i}} are exemplars from the data and we require the kernels to be normalized ∫ ρ ( ‖ x − c i ‖ ) d n x = 1 {\displaystyle \int \rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}\,d^{n}\mathbf {x} =1} and ∫ σ ( | y − e i | ) d y = 1 {\displaystyle \int \sigma {\big (}\left\vert y-e_{i}\right\vert {\big )}\,dy=1} . The probability densities in the input and output spaces are P ( x ) = ∫ P ( x ∧ y ) d y = 1 N ∑ i = 1 N ρ ( ‖ x − c i ‖ ) {\displaystyle P\left(\mathbf {x} \right)=\int P\left(\mathbf {x} \land y\right)\,dy={1 \over N}\sum _{i=1}^{N}\,\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}} and The expectation of y given an input x {\displaystyle \mathbf {x} } is φ ( x ) = d e f E ( y ∣ x ) = ∫ y P ( y ∣ x ) d y {\displaystyle \varphi \left(\mathbf {x} \right)\ {\stackrel {\mathrm {def} }{=}}\ E\left(y\mid \mathbf {x} \right)=\int y\,P\left(y\mid \mathbf {x} \right)dy} where P ( y ∣ x ) {\displaystyle P\left(y\mid \mathbf {x} \right)} is the conditional probability of y given x {\displaystyle \mathbf {x} } . The conditional probability is related to the joint probability through Bayes' theorem P ( y ∣ x ) = P ( x ∧ y ) P ( x ) {\displaystyle P\left(y\mid \mathbf {x} \right)={\frac {P\left(\mathbf {x} \land y\right)}{P\left(\mathbf {x} \right)}}} which yields φ ( x ) = ∫ y P ( x ∧ y ) P ( x ) d y {\displaystyle \varphi \left(\mathbf {x} \right)=\int y\,{\frac {P\left(\mathbf {x} \land y\right)}{P\left(\mathbf {x} \right)}}\,dy} . This becomes φ ( x ) = ∑ i = 1 N e i ρ ( ‖ x − c i ‖ ) ∑ i = 1 N ρ ( ‖ x − c i ‖ ) = ∑ i = 1 N e i u ( ‖ x − c i ‖ ) {\displaystyle \varphi \left(\mathbf {x} \right)={\frac {\sum _{i=1}^{N}e_{i}\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}}{\sum _{i=1}^{N}\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}}}=\sum _{i=1}^{N}e_{i}u{\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}} when the integrations are performed. === Local linear models === It is sometimes convenient to expand the architecture to include local linear models. In that case the architectures become, to first order, φ ( x ) = ∑ i = 1 N ( a i + b i ⋅ ( x − c i ) ) ρ ( ‖ x − c i ‖ ) {\displaystyle \varphi \left(\mathbf {x} \right)=\sum _{i=1}^{N}\left(a_{i}+\mathbf {b} _{i}\cdot \left(\mathbf {x} -\mathbf {c} _{i}\right)\right)\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}} and φ ( x ) = ∑ i = 1 N ( a i + b i ⋅ ( x − c i ) ) u ( ‖ x − c i ‖ ) {\displaystyle \varphi \left(\mathbf {x} \right)=\sum _{i=1}^{N}\left(a_{i}+\mathbf {b} _{i}\cdot \left(\mathbf {x} -\mathbf {c} _{i}\right)\right)u{\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}} in the unnormalized and normalized cases, respectively. Here b i {\displaystyle \mathbf {b} _{i}} are weights to be determined. Higher order linear terms are also possible. This result can be written φ ( x ) = ∑ i = 1 2 N ∑ j = 1 n e i j v i j ( x − c i ) {\displaystyle \varphi \left(\mathbf {x} \right)=\sum _{i=1}^{2N}\sum _{j=1}^{n}e_{ij}v_{ij}{\big (}\mathbf {x} -\mathbf {c} _{i}{\big )}} where e i j = { a i , if i ∈ [ 1 , N ] b i j , if i ∈ [ N + 1 , 2 N ] {\displaystyle e_{ij}={\begin{cases}a_{i},&{\mbox{if }}i\in [1,N]\\b_{ij},&{\mbox{if }}i\in [N+1,2N]\end{cases}}} and v i j ( x − c i ) = d e f { δ i j ρ ( ‖ x − c i ‖ ) , if i ∈ [ 1 , N ] ( x i j − c i j ) ρ ( ‖ x − c i ‖ ) , if i ∈ [ N + 1 , 2 N ] {\displaystyle v_{ij}{\big (}\mathbf {x} -\mathbf {c} _{i}{\big )}\ {\stackrel {\mathrm {def} }{=}}\ {\begin{cases}\delta _{ij}\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )},&{\mbox{if }}i\in [1,N]\\\left(x_{ij}-c_{ij}\right)\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )},&{\mbox{if }}i\in [N+1,2N]\end{cases}}} in the unnormalized case and in the normalized case. Here δ i j {\displaystyle \delta _{ij}} is a Kronecker delta function defined as δ i j = { 1 , if i = j 0 , if i ≠ j {\displaystyle \delta _{ij}={\begin{cases}1,&{\mbox{if }}i=j\\0,&{\mbox{if }}i\neq j\end{cases}}} . == Training == RBF networks are typically trained from pairs of input and target values x ( t ) , y ( t ) {\displaystyle \mathbf {x} (t),y(t)} , t = 1 , … , T {\displaystyle t=1,\dots ,T} by a two-step algorithm. In the first step, the center vectors c i {\displaystyle \mathbf {c} _{i}} of the RBF functions in the hidden layer

  Read more →
• 

  Admissible heuristic

  In computer science, specifically in algorithms related to pathfinding, a heuristic function is said to be admissible if it never overestimates the cost of reaching the goal, i.e. the cost it estimates to reach the goal is not higher than the lowest possible cost from the current point in the path. In other words, it should act as a lower bound. It is related to the concept of consistent heuristics. While all consistent heuristics are admissible, not all admissible heuristics are consistent. == Search algorithms == An admissible heuristic is used to estimate the cost of reaching the goal state in an informed search algorithm. In order for a heuristic to be admissible to the search problem, the estimated cost must always be lower than or equal to the actual cost of reaching the goal state. The search algorithm uses the admissible heuristic to find an estimated optimal path to the goal state from the current node. For example, in A search the evaluation function (where n {\displaystyle n} is the current node) is: f ( n ) = g ( n ) + h ( n ) {\displaystyle f(n)=g(n)+h(n)} where f ( n ) {\displaystyle f(n)} = the evaluation function. g ( n ) {\displaystyle g(n)} = the cost from the start node to the current node h ( n ) {\displaystyle h(n)} = estimated cost from current node to goal. h ( n ) {\displaystyle h(n)} is calculated using the heuristic function. With a non-admissible heuristic, the A algorithm could overlook the optimal solution to a search problem due to an overestimation in f ( n ) {\displaystyle f(n)} . == Formulation == n {\displaystyle n} is a node h {\displaystyle h} is a heuristic h ( n ) {\displaystyle h(n)} is cost indicated by h {\displaystyle h} to reach a goal from n {\displaystyle n} h ∗ ( n ) {\displaystyle h^{}(n)} is the optimal cost to reach a goal from n {\displaystyle n} h ( n ) {\displaystyle h(n)} is admissible if, ∀ n {\displaystyle \forall n} h ( n ) ≤ h ∗ ( n ) {\displaystyle h(n)\leq h^{}(n)} == Construction == An admissible heuristic can be derived from a relaxed version of the problem, or by information from pattern databases that store exact solutions to subproblems of the problem, or by using inductive learning methods. == Examples == Two different examples of admissible heuristics apply to the fifteen puzzle problem: Hamming distance Manhattan distance The Hamming distance is the total number of misplaced tiles. It is clear that this heuristic is admissible since the total number of moves to order the tiles correctly is at least the number of misplaced tiles (each tile not in place must be moved at least once). The cost (number of moves) to the goal (an ordered puzzle) is at least the Hamming distance of the puzzle. The Manhattan distance of a puzzle is defined as: h ( n ) = ∑ all tiles d i s t a n c e ( tile, correct position ) {\displaystyle h(n)=\sum _{\text{all tiles}}{\mathit {distance}}({\text{tile, correct position}})} Consider the puzzle below in which the player wishes to move each tile such that the numbers are ordered. The Manhattan distance is an admissible heuristic in this case because every tile will have to be moved at least the number of spots in between itself and its correct position. The subscripts show the Manhattan distance for each tile. The total Manhattan distance for the shown puzzle is: h ( n ) = 3 + 1 + 0 + 1 + 2 + 3 + 3 + 4 + 3 + 2 + 4 + 4 + 4 + 1 + 1 = 36 {\displaystyle h(n)=3+1+0+1+2+3+3+4+3+2+4+4+4+1+1=36} == Optimality proof == If an admissible heuristic is used in an algorithm that, per iteration, progresses only the path of lowest evaluation (current cost + heuristic) of several candidate paths, terminates the moment its exploration reaches the goal and, crucially, closes all optimal paths before terminating (something that's possible with A search algorithm if special care isn't taken), then this algorithm can only terminate on an optimal path. To see why, consider the following proof by contradiction: Assume such an algorithm managed to terminate on a path T with a true cost Ttrue greater than the optimal path S with true cost Strue. This means that before terminating, the evaluated cost of T was less than or equal to the evaluated cost of S (or else S would have been picked). Denote these evaluated costs Teval and Seval respectively. The above can be summarized as follows, Strue < Ttrue Teval ≤ Seval If our heuristic is admissible it follows that at this penultimate step Teval = Ttrue because any increase on the true cost by the heuristic on T would be inadmissible and the heuristic cannot be negative. On the other hand, an admissible heuristic would require that Seval ≤ Strue which combined with the above inequalities gives us Teval < Ttrue and more specifically Teval ≠ Ttrue. As Teval and Ttrue cannot be both equal and unequal our assumption must have been false and so it must be impossible to terminate on a more costly than optimal path. As an example, let us say we have costs as follows:(the cost above/below a node is the heuristic, the cost at an edge is the actual cost) 0 10 0 100 0 START ---- O ----- GOAL | | 0| |100 | | O ------- O ------ O 100 1 100 1 100 So clearly we would start off visiting the top middle node, since the expected total cost, i.e. f ( n ) {\displaystyle f(n)} , is 10 + 0 = 10 {\displaystyle 10+0=10} . Then the goal would be a candidate, with f ( n ) {\displaystyle f(n)} equal to 10 + 100 + 0 = 110 {\displaystyle 10+100+0=110} . Then we would clearly pick the bottom nodes one after the other, followed by the updated goal, since they all have f ( n ) {\displaystyle f(n)} lower than the f ( n ) {\displaystyle f(n)} of the current goal, i.e. their f ( n ) {\displaystyle f(n)} is 100 , 101 , 102 , 102 {\displaystyle 100,101,102,102} . So even though the goal was a candidate, we could not pick it because there were still better paths out there. This way, an admissible heuristic can ensure optimality. However, note that although an admissible heuristic can guarantee final optimality, it is not necessarily efficient.

  Read more →
• 

  Sufficient dimension reduction

  In statistics, sufficient dimension reduction (SDR) is a paradigm for analyzing data that combines the ideas of dimension reduction with the concept of sufficiency. Dimension reduction has long been a primary goal of regression analysis. Given a response variable y and a p-dimensional predictor vector x {\displaystyle {\textbf {x}}} , regression analysis aims to study the distribution of y ∣ x {\displaystyle y\mid {\textbf {x}}} , the conditional distribution of y {\displaystyle y} given x {\displaystyle {\textbf {x}}} . A dimension reduction is a function R ( x ) {\displaystyle R({\textbf {x}})} that maps x {\displaystyle {\textbf {x}}} to a subset of R k {\displaystyle \mathbb {R} ^{k}} , k < p, thereby reducing the dimension of x {\displaystyle {\textbf {x}}} . For example, R ( x ) {\displaystyle R({\textbf {x}})} may be one or more linear combinations of x {\displaystyle {\textbf {x}}} . A dimension reduction R ( x ) {\displaystyle R({\textbf {x}})} is said to be sufficient if the distribution of y ∣ R ( x ) {\displaystyle y\mid R({\textbf {x}})} is the same as that of y ∣ x {\displaystyle y\mid {\textbf {x}}} . In other words, no information about the regression is lost in reducing the dimension of x {\displaystyle {\textbf {x}}} if the reduction is sufficient. == Graphical motivation == In a regression setting, it is often useful to summarize the distribution of y ∣ x {\displaystyle y\mid {\textbf {x}}} graphically. For instance, one may consider a scatterplot of y {\displaystyle y} versus one or more of the predictors or a linear combination of the predictors. A scatterplot that contains all available regression information is called a sufficient summary plot. When x {\displaystyle {\textbf {x}}} is high-dimensional, particularly when p ≥ 3 {\displaystyle p\geq 3} , it becomes increasingly challenging to construct and visually interpret sufficiency summary plots without reducing the data. Even three-dimensional scatter plots must be viewed via a computer program, and the third dimension can only be visualized by rotating the coordinate axes. However, if there exists a sufficient dimension reduction R ( x ) {\displaystyle R({\textbf {x}})} with small enough dimension, a sufficient summary plot of y {\displaystyle y} versus R ( x ) {\displaystyle R({\textbf {x}})} may be constructed and visually interpreted with relative ease. Hence sufficient dimension reduction allows for graphical intuition about the distribution of y ∣ x {\displaystyle y\mid {\textbf {x}}} , which might not have otherwise been available for high-dimensional data. Most graphical methodology focuses primarily on dimension reduction involving linear combinations of x {\displaystyle {\textbf {x}}} . The rest of this article deals only with such reductions. == Dimension reduction subspace == Suppose R ( x ) = A T x {\displaystyle R({\textbf {x}})=A^{T}{\textbf {x}}} is a sufficient dimension reduction, where A {\displaystyle A} is a p × k {\displaystyle p\times k} matrix with rank k ≤ p {\displaystyle k\leq p} . Then the regression information for y ∣ x {\displaystyle y\mid {\textbf {x}}} can be inferred by studying the distribution of y ∣ A T x {\displaystyle y\mid A^{T}{\textbf {x}}} , and the plot of y {\displaystyle y} versus A T x {\displaystyle A^{T}{\textbf {x}}} is a sufficient summary plot. Without loss of generality, only the space spanned by the columns of A {\displaystyle A} need be considered. Let η {\displaystyle \eta } be a basis for the column space of A {\displaystyle A} , and let the space spanned by η {\displaystyle \eta } be denoted by S ( η ) {\displaystyle {\mathcal {S}}(\eta )} . It follows from the definition of a sufficient dimension reduction that F y ∣ x = F y ∣ η T x , {\displaystyle F_{y\mid x}=F_{y\mid \eta ^{T}x},} where F {\displaystyle F} denotes the appropriate distribution function. Another way to express this property is y ⊥ ⊥ x ∣ η T x , {\displaystyle y\perp \!\!\!\perp {\textbf {x}}\mid \eta ^{T}{\textbf {x}},} or y {\displaystyle y} is conditionally independent of x {\displaystyle {\textbf {x}}} , given η T x {\displaystyle \eta ^{T}{\textbf {x}}} . Then the subspace S ( η ) {\displaystyle {\mathcal {S}}(\eta )} is defined to be a dimension reduction subspace (DRS). === Structural dimensionality === For a regression y ∣ x {\displaystyle y\mid {\textbf {x}}} , the structural dimension, d {\displaystyle d} , is the smallest number of distinct linear combinations of x {\displaystyle {\textbf {x}}} necessary to preserve the conditional distribution of y ∣ x {\displaystyle y\mid {\textbf {x}}} . In other words, the smallest dimension reduction that is still sufficient maps x {\displaystyle {\textbf {x}}} to a subset of R d {\displaystyle \mathbb {R} ^{d}} . The corresponding DRS will be d-dimensional. === Minimum dimension reduction subspace === A subspace S {\displaystyle {\mathcal {S}}} is said to be a minimum DRS for y ∣ x {\displaystyle y\mid {\textbf {x}}} if it is a DRS and its dimension is less than or equal to that of all other DRSs for y ∣ x {\displaystyle y\mid {\textbf {x}}} . A minimum DRS S {\displaystyle {\mathcal {S}}} is not necessarily unique, but its dimension is equal to the structural dimension d {\displaystyle d} of y ∣ x {\displaystyle y\mid {\textbf {x}}} , by definition. If S {\displaystyle {\mathcal {S}}} has basis η {\displaystyle \eta } and is a minimum DRS, then a plot of y versus η T x {\displaystyle \eta ^{T}{\textbf {x}}} is a minimal sufficient summary plot, and it is (d + 1)-dimensional. == Central subspace == If a subspace S {\displaystyle {\mathcal {S}}} is a DRS for y ∣ x {\displaystyle y\mid {\textbf {x}}} , and if S ⊂ S drs {\displaystyle {\mathcal {S}}\subset {\mathcal {S}}_{\text{drs}}} for all other DRSs S drs {\displaystyle {\mathcal {S}}_{\text{drs}}} , then it is a central dimension reduction subspace, or simply a central subspace, and it is denoted by S y ∣ x {\displaystyle {\mathcal {S}}_{y\mid x}} . In other words, a central subspace for y ∣ x {\displaystyle y\mid {\textbf {x}}} exists if and only if the intersection ⋂ S drs {\textstyle \bigcap {\mathcal {S}}_{\text{drs}}} of all dimension reduction subspaces is also a dimension reduction subspace, and that intersection is the central subspace S y ∣ x {\displaystyle {\mathcal {S}}_{y\mid x}} . The central subspace S y ∣ x {\displaystyle {\mathcal {S}}_{y\mid x}} does not necessarily exist because the intersection ⋂ S drs {\textstyle \bigcap {\mathcal {S}}_{\text{drs}}} is not necessarily a DRS. However, if S y ∣ x {\displaystyle {\mathcal {S}}_{y\mid x}} does exist, then it is also the unique minimum dimension reduction subspace. === Existence of the central subspace === While the existence of the central subspace S y ∣ x {\displaystyle {\mathcal {S}}_{y\mid x}} is not guaranteed in every regression situation, there are some rather broad conditions under which its existence follows directly. For example, consider the following proposition from Cook (1998): Let S 1 {\displaystyle {\mathcal {S}}_{1}} and S 2 {\displaystyle {\mathcal {S}}_{2}} be dimension reduction subspaces for y ∣ x {\displaystyle y\mid {\textbf {x}}} . If x {\displaystyle {\textbf {x}}} has density f ( a ) > 0 {\displaystyle f(a)>0} for all a ∈ Ω x {\displaystyle a\in \Omega _{x}} and f ( a ) = 0 {\displaystyle f(a)=0} everywhere else, where Ω x {\displaystyle \Omega _{x}} is convex, then the intersection S 1 ∩ S 2 {\displaystyle {\mathcal {S}}_{1}\cap {\mathcal {S}}_{2}} is also a dimension reduction subspace. It follows from this proposition that the central subspace S y ∣ x {\displaystyle {\mathcal {S}}_{y\mid x}} exists for such x {\displaystyle {\textbf {x}}} . == Methods for dimension reduction == There are many existing methods for dimension reduction, both graphical and numeric. For example, sliced inverse regression (SIR) and sliced average variance estimation (SAVE) were introduced in the 1990s and continue to be widely used. Although SIR was originally designed to estimate an effective dimension reducing subspace, it is now understood that it estimates only the central subspace, which is generally different. More recent methods for dimension reduction include likelihood-based sufficient dimension reduction, estimating the central subspace based on the inverse third moment (or kth moment), estimating the central solution space, graphical regression, envelope model, and the principal support vector machine. For more details on these and other methods, consult the statistical literature. Principal components analysis (PCA) and similar methods for dimension reduction are not based on the sufficiency principle. === Example: linear regression === Consider the regression model y = α + β T x + ε , where ε ⊥ ⊥ x . {\displaystyle y=\alpha +\beta ^{T}{\textbf {x}}+\varepsilon ,{\text{ where }}\varepsilon \perp \!\!\!\perp {\textbf {x}}.} Note that the distribution of y ∣ x {\displaystyle y\mid {\textbf {x}}} is the same as the distribution of y ∣ β T x {\displ

  Read more →
• 

  FERET database

  The Facial Recognition Technology (FERET) database is a dataset used for facial recognition system evaluation as part of the Face Recognition Technology (FERET) program. It was first established in 1993 under a collaborative effort between Harry Wechsler at George Mason University and Jonathon Phillips at the Army Research Laboratory in Adelphi, Maryland. The FERET database serves as a standard database of facial images for researchers to use to develop various algorithms and report results. The use of a common database also allowed one to compare the effectiveness of different approaches in methodology and gauge their strengths and weaknesses. The facial images for the database were collected between December 1993 and August 1996, accumulating a total of 14,126 images pertaining to 1,199 individuals along with 365 duplicate sets of images that were taken on a different day. In 2003, the Defense Advanced Research Projects Agency (DARPA) released a high-resolution, 24-bit color version of these images. The dataset tested includes 2,413 still facial images, representing 856 individuals. The FERET database has been used by more than 460 research groups and is managed by the National Institute of Standards and Technology (NIST).

  Read more →