AI Chat Free No Sign Up

AI Chat Free No Sign Up — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

NASA AI Assisted-Air Quality Monitoring Project

The NASA Expert-System Ion Trap Mass Spectrometer (ES-ITMS) Project was a public-private partnership to develop an artificial intelligence assisted, air quality monitoring system and was qualified for use on the Space Shuttle. The partnership was also the first cost and intellectual property shared public-partnership implemented by NASA, which used the commercial Research and Development Limited Partnership (RDLP) model that had been adopted by the Reagan Administration for Department of Defense semiconductor development, and recommended for use by NASA for space commercialization. The project partners included NASA, the University of Florida and Finnigan MAT Corporation, was organized and administered by the NASA Joint Enterprise Institute (subsequently NASA Joint Sponsored Program) and ran from 1988 through 1990. The partnership concluded final testing in 1991, generating four patents, expert system software and application protocol reports. The system was space qualified for use on the Shuttle and elements of the ES-ITMS system were integrated into the product Improvements for Finnigan MAT corporation. The success of the partnership lead NASA to create a pilot program to develop partnership business models as an ongoing management practice. == Purpose and objectives == The need to monitor air quality in confined spaces represented an increasing challenge for NASA's planned space missions and private sector facility managers facing the increased scrutiny of possible air contaminants. Up to the early 1980's, air quality monitors generally required large spaces and human technicians to interpret readings. This created a need for miniaturized air quality monitors that could generate reliable and accurate analytic results without on-site technician presence. NASA initiated projects to develop..."mobile and/or portable mass spectrometers" that evaluated the "tradeoff between instrumentation capabilities and space, weight and power considerations." NASA selected a "commercial ITMS instrument capable of generating electron ionization, chemical ionization and mass spectrometry data", to develop a linked expert system to accomplish analysis without human intervention. The commercial instrumentation was from Finnigan MAT corporation while the scientific expertise to support expert system development was available at the University of Florida. The project managers at NASA Ames created a single, integrated project using the RDLP model with objectives to: Develop AI/expert system software for instrument control (NASA's role) Expand sensitivity, selectivity and speed of the spectrometer (Univ Florida role) Expand the spectrometer analytic capability and automate the screening (Finnigan role) == Membership == The partnership included seven specialists from five member organizations: Federal Government National Aeronautics and Space Administration (NASA) NASA Ames Research Center (ARC) NASA Kennedy Space Center (KSC) Commercial Finnigan MAT Corporation (Thermo-Fisher Scientific) TGS Technology, Inc. Research Management University of Florida == Organization, management and administration == The technical project was organized into two development teams, one located in at the NASA Ames Research Center covering expert systems and analytic capabilities and one in Florida covering improved sensitivity and testing. The partnership management and administration was provided by a non-profit, partnership support organization: the Joint Enterprise Institute operating through San Francisco State University Foundation (SFSUF) with a NASA employee liaison, Syed Shariq. == Public-private partnership == The partnership structure was as a prototype test of a pilot NASA program to develop public-private partnership business models. The pilot program was known as the NASA Joint Sponsored Research Program (JSRP), which operated as the NASA Joint Enterprise Institute between 1988 and 1991. The partnership was the first public-private, research and development partnership implemented by NASA in response to national policy shifts to increase technology transfer and space commercialization. The partnership structure included a two year technology development and testing plan that cost $610,000, of which NASA funded $310,000, Finnigan $175,000 and the University of Florida $95,000. == Results and commercialization == The project generated patents (4), software (2) and application protocol reports (8). NASA gained use of the patents and jointly development software while Finnigan received commercial utilization rights. The results were commercialized within eighteen months of project completion. == Recognition == NASA recognized the project as a space qualified instrument. Its achievements were reported to the NASA Administrator, directly leading to establishment of the agency-wide Joint Sponsored Research Program.
Read more →
Electronics (journal)

Electronics is a peer-reviewed, scientific journal that covers the study of electronics, including the design, development, and application of electronic devices, systems, and circuits. The journal is published by MDPI and was established in 2012. The editor-in-chief is Flavio Canavero 'Politecnico di Torino). The journal covers a wide range of topics related to electronics, including: electronic devices, electronic materials, electronic circuits, electronic systems, communication electronics, power electronics, and biomedical electronics. The journal also includes articles on the application of electronics in various fields, such as consumer electronics, industrial electronics, automotive electronics, and military electronics. The journal publishes original research articles, review articles, and short communications. == Abstracting and indexing == EBSCO databases ProQuest databases Scopus According to the Journal Citation Reports, the journal has a 2021 impact factor of 2.690.
Read more →
Open Mashup Alliance

The Open Mashup Alliance (OMA) is a non-profit consortium that promotes the adoption of mashup solutions in the enterprise through the evolution of enterprise mashup standards like EMML. The initial members of the OMA include some large technology companies such as Adobe Systems, Hewlett-Packard, and Intel and some major technology users such as Bank of America and Capgemini. According to Dion Hinchcliffe, "Ultimately, the OMA creates a standardized approach to enterprise mashups that creates an open and vibrant market for competing runtimes, mashups, and an array of important aftermarket services such as development/testing tools, management and administration appliances, governance frameworks, education, professional services, and so on." == Specification development == The initial focus of the OMA is developing EMML, which is a declarative mashup domain-specific language (DSL) aimed at creating enterprise mashups. The EMML language provides a comprehensive set of high-level mashup-domain vocabulary to consume and mash a variety of web data sources. EMML provides a uniform syntax to invoke heterogeneous service styles: REST, WSDL, RSS/ATOM, RDBMS, and POJO. EMML also provides the ability to mix and match diverse data formats: XML, JSON, JDBC, JavaObjects, and primitive types. The OMA website provides the EMML specification, the EMML schema, a reference runtime implementation capable of running EMML scripts, sample EMML mashup scripts, and technical documentation. The OMA is developing EMML under a Creative Commons Attribution No Derivatives license. The eventual objective of the OMA is to submit the EMML specification and any other OMA specifications to a recognized industry standards body.
Read more →
Commercial skipping

Commercial skipping is a feature of some digital video recorders that makes it possible to automatically skip commercials in recorded programs. This feature created controversy, with major television networks and movie studios claiming it violates copyright and should be banned. == History == After the video cassette recorder (VCR) became popular in the 1980s, the television industry began studying the impact of users fast forwarding through commercials. Advertising agencies fought the trend by making them more entertaining. For many years, video recorders manufactured for the Japanese market have been able to skip advertisements automatically, which is done by detecting when foreign language audio overdub tracks provided for many programmes go silent, as advertisements were broadcast with a single language only. The first digital video recorder (DVR) with a built-in commercial skipping feature was ReplayTV with its "4000 Series" and "5000 Series" units. In 2002, the main television networks and movie studios sued ReplayTV, claiming that skipping advertisements during replay violates copyright. Later, five owners of ReplayTV represented by Electronic Frontier Foundation and attorneys Ira Rothken and Richard Wiebe countersued, asking the federal judge to uphold consumers' rights to record TV shows and skip commercials, claiming that features like commercial skipping help parents protect their kids from excessive consumerism. ReplayTV ended up filing for bankruptcy in 2003 after fighting a copyright infringement suit over the ReplayTV's ability to skip commercials. === Commercial skipping software === In addition to the DVR devices which existed in the private market since the late 1990s, towards the mid-2000s, due to the significant advances in home computers, Home theater PCs started gaining popularity in the private market and many users began using their Home theater PCs in their living room for entertainment purposes. Following this, many DVR programs were developed, including popular programs such as Windows Media Center, which contained all of the features of the DVR devices in addition to advanced features such as HDTV and the use of Multiple TV Tuner Cards. Some independent developers began developing independent software capable of skipping the commercial segments when playing recorded videos, and permanently removing the commercial segments from recorded video files. By 2014, many DVR programs such as Windows Media Center, SageTV and MythTV had the capability to skip commercials segments in recorded TV broadcasts after installing third-party add-ons such as DVRMSToolbox, Comskip and ShowAnalyzer, which use various advanced techniques to locate the commercial segments in the video files and save their locations to text files. The text files can also be fed into programs such as MEncoder or DVRMSToolboxGUI which can delete the commercial segments from the recorded video files. A few third-party tools such as MCEBuddy automate detection and removal/marking of commercials. One of the weaknesses of commercial skippers is that, operating automatically, they may misidentify program material as a commercial. Some programs like MCEBuddy provide the ability to fine-tune commercial detection for groups of files (e.g. by channel or country) and provide tools to manually fine-tune commercial segments for individual files. In May 2012, the US Dish Network began offering a DVR with what it calls AutoHop. The device would automatically skip commercials when displaying programming that the viewer had previously recorded with the PrimeTime Anytime feature. It does not skip ads on any live programs. US broadcasters were angered at the news, and FOX embarked on legal action. Most, but not all, of Fox's claims were dismissed; ultimately an agreement was reached whereby AutoHop would only become available for Fox stations seven days after a program is transmitted; terms of the settlement were not disclosed. == The future of TV advertisements == The introduction of digital video recorders and services with skipping and fast-forward capabilities enables viewers to avoid viewing interruptive advertisements in recorded programs, either manually or automatically. While advertising separate to television shows can be skipped, advertising in TV shows themselves ("product placement") cannot be skipped. Streaming services such as Hulu show shorter advertisements with a countdown timer and tailored to the viewers interests, asking interactive questions like "Is this ad relevant to you?".
Read more →
Spotify Live

Spotify Live, formerly Spotify Greenroom, was a social audio app by Spotify, that allowed users to host or participate in live-audio virtual environments called "room" for conversations. Each room had a maximum capacity of 1000 people. The app was available on Android and iOS, competing with Twitter Spaces and Clubhouse in the social media segment. It was shut down on April 30, 2023. == History == In October 2020, Betty Labs released Locker Room exclusively on the iOS App Store. The app featured virtual audio chat rooms for sports enthusiasts. In late March 2021, Spotify acquired Betty Labs for $50 million and announced plans to rebrand the app with a broader focus on sports, music, and pop culture. On June 16, 2021, Spotify launched the app as Spotify Greenroom on Android (early access) and iOS, expanding its scope beyond just sports. At launch, Spotify introduced the Greenroom Creator Fund to support creators and shows, serving as a rival to Clubhouse's Creator First Accelerator Program. The fund aimed to provide a monetization path for podcasters integrating Greenroom into their verified Spotify accounts. By July 2021, the app had accumulated over 140,000 iOS installs and 100,000 Android installs. In August 2021, Spotify collaborated with the WWE to produce professional wrestling-related podcasts, many of which would be recorded by The Ringer, Spotify's in-house podcasting team, using Greenroom. In March 2022, Spotify Greenroom announced its rebranding as Spotify Live and its migration to the main Spotify app. After a year, Spotify announced it would shut down the Spotify Live app at the end of April 2023. == Features == Greenroom allowed users to create or join a room, which, in the context of the application, was a virtual space for real-time voice chats. Users could only create a room within a pre-defined group, representing either a brand or a generic category. If a user chose to create a room, they became the host, with the ability to invite people, control who could talk, and enable features like recording and the Discussions tab during room creation. Enabling recording displayed a disclaimer informing users that the conversation was being recorded, and the audio, recorded in mp4 format, would be sent to the host via email after the room concluded. If the Discussions tab was enabled, users could send text messages in the public chat section. The host also had the authority to ban users if necessary. When joining a room, a user could opt to be a listener or request to become a speaker. Users had the freedom to follow or block others and join groups at their discretion. Notifications about new rooms in joined groups would be sent to users. Additionally, users could discover new individuals and groups using the search tab. == Partnered creators == By October 2021, Spotify had a variety of partnered creators aimed at boosting traffic and validating its vertically integrated podcast model. These creators primarily focused on Generation Z. In-house Spotify talent, such as The Ringer, produced sports-related content. Simultaneously, the company recruited creators from various social channels to grow Greenroom's audience while also promoting its integration with Spotify and Anchor. Each verified Spotify partner had their Greenroom shows featured in both the Greenroom app and their profiles on the Spotify app. This was part of the company's strategy leading into the 2022 ramp-up to compete with Clubhouse. == Platforms == The app was accessible on both Android and iOS platforms, and users could download the app from their respective app stores. Android users needed Android 8 or above to launch the app, while iOS consumers required iOS 13 or later to run it.
Read more →
Deluxe Media

Deluxe Media Inc., also known simply as Deluxe and formerly Deluxe Entertainment Services Group, Inc., is an American multinational multimedia and entertainment service provisions company owned by Platinum Equity, founded in 1915 by Hungarian-born American film producer William Fox and headquartered in Burbank, California. The company services multiple clients in the film, television, digital content and advertising industries across the globe, and has been recognized with 10 Academy Awards for scientific and technical achievements, including developments in CinemaScope pictures (as part of 20th Century Fox) and more recently for a process of creating archival separations from digital image data. == History == Deluxe began as a film processing laboratory established in 1915 by William Fox under the name De Luxe as part of his eponymous film conglomerate corporation in Fort Lee, New Jersey. In 1916, Fox Film Corporation opened its studio in Hollywood on 13 acres at Sunset and Western. The first Deluxe film laboratory on the west coast was built on the south side of the lot (Fernwood and Serrano), and the laboratory was moved to the new Fox studios building on Manhattan's west side in 1919, where it remained for over 40 years. The "business manager" (later president) of the laboratory was Alan E. Freedman, who guided the company into the 1960s. In 1927, Fox (Deluxe) received a patent for sound-on-film, the Fox Movietone system. In 1927, "Sunrise: A Song of Two Humans," an early Movietone film, opened. Fox Movietone News, ran weekly in theaters until 1963. During the Great Depression, Fox Film Corporation encountered financial difficulties. Among the actions taken to maintain liquidity, Fox sold the laboratories in 1932 to Freedman, who renamed the operation Deluxe. Under Freedman's leadership, Deluxe added two more plants in Chicago and Toronto. In January 1934, Fox was granted an option to rebuy DeLuxe before December 31, 1938. On 31 May 1935, under Sidney Kent, Fox merged his film company with Twentieth Century Pictures to form The Twentieth Century-Fox Film Corporation following a bank-infused reorganisation. The merged company then exercised this option in July 1936, with Freedman remaining as president. In 1953, Deluxe developed the widescreen format CinemaScope. Titles included "There's No Business Like Show Business" (1954) and "The Seven Year Itch" (1955). Other innovations included the processing and sound striping of CinemaScope, and were patented and/or received Academy awards. In 1962 Freedman retired. In the 1960s, Deluxe closed its New York plant, followed by its plants in Chicago and Toronto, as motion picture production declined on the East Coast. In 1972, Deluxe began large volume videocassette production, with a billion by 1996. In 1990, The Rank Organisation acquired Deluxe from Fox. In 2000, Deluxe began large volume DVD production. In 2006, The Rank Organisation sold Deluxe Film Group to MacAndrews & Forbes, renamed Deluxe Entertainment Services Group. On 9 February 2012, Deluxe acquired Hong Kong–based visual effects and post-production company, Centro Digital Pictures, with its founder John Chu remaining as president while reporting to Alaric McAusland, managing director for Deluxe in Australia. In May 2014, Deluxe shut down its Los Angeles plant at Sunset & Western Studios complex, where other studios themselves were demolished way back in 1971. Also that same year, Deluxe closed the Hollywood film labs, and they gave thousands of orphaned film elements to the Academy Film Archive. The Deluxe Laboratories Collection at the Academy Film Archive consists of over 7,500 35mm and 16mm film elements of various motion pictures dating back to the early 1960s. On 22 April 2015, Deluxe and its longtime competitor, Technicolor S.A., announced that they had entered into a binding agreement to create a new joint venture known as Deluxe Technicolor Digital Cinema which will specialize in cinema mastering, distribution and management services. Deluxe got acquired on 4 September 2019 by creditors in a debt-for-equity swap to avoid bankruptcy. On 3 October 2019, Deluxe filed for bankruptcy, pending in the Southern District of New York. The same month on the 24th, the company received court approval to emerge from bankruptcy with a comprehensive restructuring plan. On July 1, 2020, Platinum Equity agreed to acquire the distribution division of Deluxe and re-unite with former CEO Cyril Drabinsky who would merge CineVizion, a film distribution company he founded after leaving Deluxe in 2016, into it. The companies Company 3 and Method Studios which formed the creative divisions of Deluxe were sold to Framestore in November 2020.
Read more →
WebGL

WebGL (short for Web Graphics Library) is a JavaScript API for rendering interactive 2D and 3D graphics within any compatible web browser without the use of plug-ins. WebGL is fully integrated with other web standards, allowing GPU-accelerated usage of physics, image processing, and effects in the HTML canvas. WebGL elements can be mixed with other HTML elements and composited with other parts of the page or page background. WebGL programs consist of control code written in JavaScript, and shader code written in OpenGL ES Shading Language (GLSL ES, sometimes referred to as ESSL), a language similar to C or C++. WebGL code is executed on a computer's GPU. WebGL is designed and maintained by the non-profit Khronos Group. On February 9, 2022, Khronos Group announced WebGL 2.0 support from all major browsers. From 2024, a new graphics API, WebGPU, is being developed to supersede WebGL. WebGPU provides extended capabilities, a more modern interface, and direct GPU access, which is useful for demanding graphics as well as AI applications. == Design == WebGL 1.0 is based on OpenGL ES 2.0 and provides an API for 3D graphics. It uses the HTML5 canvas element and is accessed using Document Object Model (DOM) interfaces. WebGL 2.0 is based on OpenGL ES 3.0. It guarantees the availability of many optional extensions of WebGL 1.0, and exposes new APIs. Automatic memory management is provided implicitly by JavaScript. Like OpenGL ES 2.0, WebGL lacks the fixed-function APIs introduced in OpenGL 1.0 and deprecated in OpenGL 3.0. This functionality, if required, has to be implemented by the developer using shader code and JavaScript. Shaders in WebGL are written in GLSL and passed to the WebGL API as text strings. The WebGL implementation compiles these strings to GPU code. This code is executed for each vertex sent through the API and for each pixel rasterized to the screen. == History == WebGL evolved out of the Canvas 3D experiments started by Vladimir Vukićević at Mozilla. Vukićević first demonstrated a Canvas 3D prototype in 2006. By the end of 2007, both Mozilla and Opera had made their own separate implementations. In early 2009, the non-profit technology consortium Khronos Group started the WebGL Working Group, with initial participation from Apple, Google, Mozilla, Opera, and others. Version 1.0 of the WebGL specification was released March 2011. An early application of WebGL was Zygote Body. In November 2012 Autodesk announced that they ported most of their applications to the cloud running on local WebGL clients. These applications included Autodesk Fusion and AutoCAD. Development of the WebGL 2 specification started in 2013 and finished in January 2017. The specification is based on OpenGL ES 3.0. First implementations are in Firefox 51, Chrome 56 and Opera 43. == Implementations == === Almost Native Graphics Layer Engine === Almost Native Graphics Layer Engine (ANGLE) is an open source graphic engine which implements WebGL 1.0 (2.0 which closely conforms to ES 3.0) and OpenGL ES 2.0 and 3.0 standards. It is a default backend for both Google Chrome and Mozilla Firefox on Windows platforms and works by translating WebGL and OpenGL calls to available platform-specific APIs. ANGLE currently provides access to OpenGL ES 2.0 and 3.0 to desktop OpenGL, OpenGL ES, Direct3D 9, and Direct3D 11 APIs. ″[Google] Chrome uses ANGLE for all graphics rendering on Windows, including the accelerated Canvas2D implementation and the Native Client sandbox environment.″ == Software == WebGL is widely supported by modern browsers. However, its availability depends on other factors, too, like whether the GPU supports it. The official WebGL website offers a simple test page. More detailed information (like what renderer the browser uses, and what extensions are available) can be found at third-party websites. === Desktop browsers === Source: Google Chrome – WebGL 1.0 has been enabled on all platforms that have a capable graphics card with updated drivers since version 9, released in February 2011. By default on Windows, Chrome uses the ANGLE (Almost Native Graphics Layer Engine) renderer to translate OpenGL ES to Direct X 9.0c or 11.0, which have better driver support. However, on Linux and Mac OS X, the default renderer is OpenGL. It is also possible to force OpenGL as the renderer on Windows. Since September 2013, Chrome also has a newer Direct3D 11 renderer, which requires a newer graphics card. Chrome 56+ supports WebGL 2.0. Firefox – WebGL 1.0 has been enabled on all platforms that have a capable graphics card with updated drivers since version 4.0. Since 2013 Firefox also uses DirectX on the Windows platform via ANGLE. Firefox 51+ supports WebGL 2.0. Safari – Safari 6.0 and newer versions installed on OS X Mountain Lion, Mac OS X Lion and Safari 5.1 on Mac OS X Snow Leopard implemented support for WebGL 1.0, which was disabled by default before Safari 8.0. Safari version 12 (available in MacOS Mojave) has available support for WebGL 2.0 as an "Experimental" feature. Safari 15 enables WebGL 2.0 for all users. Opera – WebGL 1.0 has been implemented in Opera 11 and 12, but was disabled by default in 2014. Opera 43+ supports WebGL 2.0. Internet Explorer – WebGL 1.0 is partially supported in Internet Explorer 11. Internet Explorer initially failed most of the official WebGL conformance tests, but Microsoft later released several updates. The latest 0.94 WebGL engine currently passes ≈97% of Khronos tests. WebGL support can also be manually added to earlier versions of Internet Explorer using third-party plugins such as IEWebGL. Microsoft Edge – For Microsoft Edge Legacy, the initial stable release supports WebGL version 0.95 (context name: "experimental-webgl") with an open source GLSL to HLSL transpiler. Version 10240+ supports WebGL 1.0 as prefixed. Latest Chromium-based Edge supports WebGL 2.0. === Mobile browsers === Google Chrome – WebGL 1.0 is supported on Android as of Chrome 25. WebGL 2.0 is supported on Android as of Chrome 58. Chrome is used for the Android system webview as of Android 5. Firefox for mobile – WebGL 1.0 is available for Android devices since Firefox 4. Safari on iOS – WebGL 1.0 is available for mobile Safari in iOS 8. WebGL 2.0 is available for mobile Safari in iOS 15. Microsoft Edge – Prefixed WebGL 1.0 was available on Windows 10 Mobile.. Latest Chromium-based Edge supports WebGL 2.0. Opera Mobile – Opera Mobile 12 supports WebGL 1.0 (on Android only). Sailfish OS – WebGL 1.0 is supported in the default Sailfish browser. Tizen – WebGL 1.0 is supported == Tools and ecosystem == === Utilities === The low-level nature of the WebGL API, which provides little on its own to quickly create desirable 3D graphics, motivated the creation of higher-level libraries that abstract common operations (e.g. loading scene graphs and 3D objects in certain formats; applying linear transformations to shaders or view frustums). Some such libraries were ported to JavaScript from other languages. Examples of libraries that provide high-level features include A-Frame (VR), BabylonJS, PlayCanvas, three.js, OSG.JS, Google’s model-viewer and CopperLicht. Web3D also made a project called X3DOM to make X3D and VRML content run on WebGL. === Games === There has been an emergence of 2D and 3D game engines for WebGL, such as Unreal Engine 4 and Unity. The Stage3D/Flash-based Away3D high-level library also has a port to WebGL via TypeScript. A more light-weight utility library that provides just the vector and matrix math utilities for shaders is sylvester.js. It is sometimes used in conjunction with a WebGL specific extension called glUtils.js. There are also some 2D libraries built atop WebGL, like Cocos2d-x or Pixi.js, which were implemented this way for performance reasons in a move that parallels what happened with the Starling Framework over Stage3D in the Flash world. The WebGL-based 2D libraries fall back to HTML5 canvas when WebGL is not available. Removing the rendering bottleneck by giving almost direct access to the GPU has exposed performance limitations in the JavaScript implementations. Some were addressed by asm.js and WebAssembly (similarly, the introduction of Stage3D exposed performance problems within ActionScript, which were addressed by projects like CrossBridge). === Content creation === As with any other graphics API, creating content for WebGL scenes requires using a 3D content creation tool and exporting the scene to a format that is readable by the viewer or helper library. Desktop 3D authoring software such as Blender, Autodesk Maya or SimLab Composer can be used for this purpose. In particular, Blend4Web allows a WebGL scene to be authored entirely in Blender and exported to a browser with a single click, even as a standalone web page. There are also some WebGL-specific software such as CopperCube and the online WebGL-based editor Clara.io. Online platforms such as Sketchfab and Clara.io allow users to directly upload their 3D models
Read more →
General-Purpose Serial Interface

General-Purpose Serial Interface, also known as GPSI, 7-wire interface, or 7WS, is a 7 wire communications interface. It is used as an interface between Ethernet MAC and PHY blocks. Data is received and transmitted using separate data paths (TXD, RXD) and separate data clocks (TXCLK, RXCLK). Other signals consist of transmit enable (TXEN), receive carrier sense (CRS), and collision (COL).
Read more →
NIS2 Directive

The Directive (EU) 2022/2555, commonly known as NIS2 is a directive of the European Union aimed at protecting digital infrastructure, in particular critical infrastructure. It broadened the sectors covered by EU network and information security rules and updated incident reporting and oversight compared to the NIS1. Member States were required to transpose NIS2 by 17 October 2024, and the earlier NIS Directive was repealed on 18 October 2024. Only 23 Member States have fully implemented the measures contained with the NIS Directive. Infringement proceedings against them to enforce the Directive have not taken place, and they are not expected to take place in the near future. This failed implementation has led to the fragmentation of cybersecurity capabilities across the EU, with differing standards, incident reporting requirements and enforcement requirements being implemented in different Member States. From the EFTA countries (to April 2026) only Liechtenstein has fully transposed the NIS2 Directive. While the EFTA commission is conducting preparations to transpose the directive into its legislation. == National implementations == === Czech Republic === It is implemented through the Act No. 264/2025 Coll. also called Zákon o kybernetické bezpečnosti (Cybersecurity law) and through another five implementing regulations. The transposing legislation came into force on November 1st, 2025. === Germany === It is implemented through the Gesetz zur Umsetzung der NIS-2-Richtlinie und zur Regelung wesentlicher Grundzüge des Informationssicherheitsmanagements in der Bundesverwaltung. === Ireland === It is implemented through the National Cyber Security Bill. === The Netherlands === It is implemented through the Cyberbeveiligingswet (Cbw). === Slovakia === It is implemented through via an amendment of the Act No. 69/2018 Coll. also called Zákon o kybernetickej bezpečnosti a o zmene a doplnení niektorých zákonov (Law on Cybersecurity and change and amendment of certain laws). It came into force on November 1st, 2025. === Spain === It is implemented through the Esquema Nacional de Seguridad (ENS).
Read more →
Universal Plug and Play

UPnP (originally Universal Plug and Play) is a set of Internet Protocol-based networking protocols that permits networked devices, such as personal computers, printers, Internet gateways, Wi-Fi access points and mobile devices, to seamlessly discover each other's presence on the network and establish functional network services. UPnP is intended primarily for residential networks without enterprise-class devices. Officially, only the abbreviations UPnP and UPnP+ are trademarked. UPnP assumes the network runs IP, and then uses HTTP on top of IP to provide device/service description, actions, data transfer and event notification. Device search requests and advertisements are supported by running HTTP on top of UDP (port 1900) using multicast (known as HTTPMU). Responses to search requests are also sent over UDP, but are instead sent using unicast (known as HTTPU). Conceptually, UPnP extends plug and play—a technology for dynamically attaching devices directly to a computer—to zero-configuration networking for residential and SOHO wireless networks. UPnP devices are plug-and-play in that, when connected to a network, they automatically establish working configurations with other devices, removing the need for users to manually configure and add devices through IP addresses. UPnP is generally regarded as unsuitable for deployment in business settings for reasons of economy, complexity, and consistency: the multicast foundation makes it chatty, consuming too many network resources on networks with a large population of devices; the simplified access controls do not map well to complex environments. == Overview == The UPnP architecture allows device-to-device networking of consumer electronics, mobile devices, personal computers, and networked home appliances. It is a distributed, open architecture protocol based on established standards such as the Internet Protocol Suite (TCP/IP), HTTP, XML, and SOAP. UPnP control points (CPs) are devices which use UPnP protocols to control UPnP controlled devices (CDs). The UPnP architecture supports zero-configuration networking. A UPnP-compatible device from any vendor can dynamically join a network, obtain an IP address, announce its name, advertise or convey its capabilities upon request, and learn about the presence and capabilities of other devices. Dynamic Host Configuration Protocol (DHCP) and Domain Name System (DNS) servers are optional and are only used if they are available on the network. Devices can disconnect from the network automatically without leaving state information. UPnP was published as a 73-part international standard ISO/IEC 29341 in December 2008. Other UPnP features include: Media and device independence UPnP technology can run on many media that support IP, including Ethernet, FireWire, Infrared (IrDA), home wiring (G.hn) and Radiofrequency (Bluetooth, Wi-Fi). No special device driver support is necessary; common network protocols are used instead. User interface (UI) control Optionally, the UPnP architecture enables devices to present a user interface through a web browser (see Presentation below). Operating system and programming language independence Any operating system and any programming language can be used to build UPnP products. UPnP stacks are available for most platforms and operating systems in both closed- and open-source forms. Programmatic control UPnP architecture also enables conventional application programmatic control. Extensibility Each UPnP product can have device-specific services layered on top of the basic architecture. In addition to combining services defined by the UPnP Forum in various ways, vendors can define their own device and service types. They can extend standard devices and services with vendor-defined actions, state variables, data structure elements, and variable values. == Protocol == UPnP uses common Internet technologies. It assumes the network must run Internet Protocol (IP) and then uses HTTP, SOAP and XML on top of IP, to provide device/service description, actions, data transfer and eventing. Device search requests and advertisements are supported by running HTTP on top of UDP using multicast (known as HTTPMU). Responses to search requests are also sent over UDP, but are instead sent using unicast (known as HTTPU). UPnP uses UDP due to its lower overhead, as it does not require confirmation of received data and retransmission of corrupt packets. HTTPU and HTTPMU specifications were initially submitted as an Internet Draft, but it expired in 2001; These specifications have since been integrated into the actual UPnP specifications. UPnP uses UDP port 1900, and all used TCP ports are derived from the SSDP alive and response messages. === Addressing === The foundation for UPnP networking is IP addressing. Each device must implement a DHCP client and search for a DHCP server when the device is first connected to the network. If no DHCP server is available, the device must assign itself an address. The process by which a UPnP device assigns itself an address is known within the UPnP Device Architecture as AutoIP. In UPnP Device Architecture Version 1.0, AutoIP is defined within the specification itself; in UPnP Device Architecture Version 1.1, AutoIP references IETF RFC 3927. If during the DHCP transaction, the device obtains a domain name, for example, through a DNS server or via DNS forwarding, the device should use that name in subsequent network operations; otherwise, the device should use its IP address. === Discovery === Once a device has established an IP address, the next step in UPnP networking is discovery. The UPnP discovery protocol is known as the Simple Service Discovery Protocol (SSDP). When a device is added to the network, SSDP allows that device to advertise its services to control points on the network. This is achieved by sending SSDP alive messages. When a control point is added to the network, SSDP enables that control point to actively search for devices of interest on the network or listen passively to SSDP alive messages from devices. The fundamental exchange is a discovery message containing a few essential details about the device or one of its services, such as its type, identifier, and a pointer (network location) to more detailed information. === Description === After a control point has discovered a device, it still knows very little about the device. For the control point to learn more about the device and its capabilities, or to interact with the device, it must retrieve the device's description from the location (URL) provided by the device in the discovery message. The UPnP Device Description is expressed in XML. It includes vendor-specific manufacturer information like the model name and number, serial number, manufacturer name, (presentation) URLs to vendor-specific websites, etc. The description also includes a list of any embedded services. For each service, the Device Description document lists the URLs for control, eventing and service description. Each service description includes a list of the commands, or actions, to which the service responds, and parameters, or arguments, for each action; the description for a service also includes a list of variables; these variables model the state of the service at run time and are described in terms of their data type, range, and event characteristics. === Control === Having retrieved a description of the device, the control point can send actions to a device's service. To do this, a control point sends a suitable control message to the control URL for the service (provided in the device description). Control messages are also expressed in XML using the Simple Object Access Protocol (SOAP). Much like function calls, the service returns any action-specific values in response to the control message. The effects of the action, if any, are modeled by changes in the variables that describe the run-time state of the service. === Event notification === Another capability of UPnP networking is event notification, or eventing. The event notification protocol defined in the UPnP Device Architecture is known as General Event Notification Architecture (GENA). A UPnP description for a service includes a list of actions the service responds to and a list of variables that model the state of the service at runtime. The service publishes updates when these variables change, and a control point may subscribe to receive this information. The service publishes updates by sending event messages. Event messages contain the names of one or more state variables and their current values. These messages are also expressed in XML. A special initial event message is sent when a control point first subscribes; this event message contains the names and values for all evented variables and allows the subscriber to initialize its model of the state of the service. To support scenarios with multiple control points, eventing is designed to keep all control points equally informed
Read more →
Digital redlining

Digital redlining is the practice of creating and perpetuating inequities between already marginalized groups specifically through the use of digital technologies, digital content, and the internet. The concept of digital redlining is an extension of the practice of redlining in housing discrimination, a historical legal practice in the United States and Canada dating back to the 1930s where red lines were drawn on maps to indicate poor and primarily black neighborhoods that were deemed unsuitable for loans or further development, which created great economic disparities between neighborhoods. The term was popularized by Dr. Chris Gilliard, a privacy scholar, who defines digital redlining as "the creation and maintenance of tech practices, policies, pedagogies, and investment decisions that enforce class boundaries and discriminate against specific groups". Though digital redlining is related to the digital divide and techniques such as weblining and personalization, it is distinct from these concepts as part of larger complex systemic issues. It can refer to practices that create inequities of access to technology services in geographical areas, such as when internet service providers decide to not service specific geographic areas because they are perceived to be not as profitable and thus reduce access to crucial services and civic participation. It can also be used to refer to inequities caused by the policies and practices of digital technologies. For instance, with these methods inequities are accomplished through divisions that are created via algorithms which are hidden from the technology user; the use of big data and analytics allow for a much more nuanced form of discrimination that can target specific vulnerable populations. These algorithmic means are enabled through the use of unregulated data technologies that apply a score to individuals that statistically categorize personality traits or tendencies which are similar to a credit score but are proprietary to the technology companies and not under outside oversight. == Digital redlining and geography == While the roots of redlining lie in excluding populations based on geography, digital redlining occurs in both geographical and non-geographical contexts. An example of both contexts can be found in the charges brought against Facebook on March 28 of 2019, by the United States Department of Housing and Urban Development (HUD). HUD charged Facebook with violating the Fair Housing Act of 1968 by "encouraging, enabling, and causing housing discrimination through the company's advertising platform." HUD stated that Facebook allowed advertisers to “exclude people who live in a specified area from seeing an ad by drawing a red line around that area.” The discrimination called out by HUD included those that were racist, homophobic, ableist, and classist. Besides this example of geographically based digital redlining, HUD also charged that Facebook used profile information and designations to exclude classes of people. The charges stated: "Facebook enabled advertisers to exclude people whom Facebook classified as parents; non-American-born; non-Christian; interested in accessibility; interested in Hispanic culture; or a wide variety of other interests that closely align with the Fair Housing Act’s protected classes" Several media outlets pointed out HUDs own history of housing discrimination through redlining, the establishment of the Fair Housing Act to combat redlining, and how the digital platform was recreating this discriminatory practice. === Digital redlining within a geographical context === Although digital redlining refers to a complex and varied set of practices, it has been most commonly applied to practices with a geographical dimension. Common examples include when an internet service providers decide to not service specific geographic areas because those areas are seen to be not as profitable, resulting in discrimination against low-income communities, with resulting impacts on access to crucial services and civic participation. AT&T has faced specific scrutiny for this form of digital redlining, it has been reported that AT&T has been classist in its offerings of broadband internet service in areas that are more impoverished. Geographically based digital redlining can also apply to digital content or the distribution of goods sold online. Geographically based games such as Pokémon Go have been shown to offer more virtual stops and rewards in geographic areas that are less ethnically and racially diverse. In 2016, Amazon was rebuked for not offering their Prime same-day delivery service to many communities that were largely African American and had incomes that were beneath the national average. Even services such as email can be impacted, with many email administrators creating filters for flagging particular email messages as spam based on the geographical origin of the message. === Digital redlining based on personal identity === Although often aligned with discrimination that falls into a geographically based context digital redlining also refers to when vulnerable populations are targeted for or excluded from specific content or access to the internet in a way that harms them based on some aspect of their identity. Trade schools and community colleges, which typically have a more working class student body, have been found to block public internet content from their students where elite research institutions do not. The use of big data and analytics allow for a much more nuanced form of discrimination that can target specific vulnerable populations. For example, Facebook has been criticized for providing tools that allow advertisers to target ads by ethnic affinity and gender, effectively blocking minorities from seeing specific ads for housing and employment. In October 2019, a major class action lawsuit was filed against Facebook alleging gender and age discrimination in financial advertising. A broad array of consumers can be particularly vulnerable to digital redlining when it is used outside of a geographical context. Besides targeting vulnerable populations based on traditional and legally recognized classifications such as race, gender, age, etc., it has been shown that personal data mined and then resold by brokers can be used to target those who have been identified as suffering from Alzheimer's or dementia, or simply identified as impulse buyers or gullible. == Term distinctions == === Distinctions between weblining and digital redlining === Earlier distinctions have been made between weblining—the process of charging customers different prices based on profile information --- and internet or digital redlining, with digital redlining being focused not on pricing but access. As early as 2002 the Gale Encyclopedia of E-Commerce puts forth the distinction more in use today: weblining is the pervasive and generally accepted (or at least tolerated) practice of personalizing access to products and services in ways invisible to the user; digital redlining is when such personalized, data-driven schemes perpetuate traditional advantages of privileged demographics. As weblining has become more ubiquitous, the term has fallen out of use in favor of the more general term personalization. === Distinctions between the digital divide and digital redlining === Scholars have often drawn connections between the digital divide and digital redlining. In practice, the digital divide is seen as one of a number of impacts of digital redlining, and digital redlining is one of a number of ways in which the divide is maintained or extended. == Criticisms == A 2001 report looked to find if the reason for a gap in access to broadband internet by low-income and minority populations was due to a lack of availability or due to other factors. The report found that there was "little evidence of digital redlining based on income or black or Hispanic concentrations" but that there was mixed evidence of redlining based on areas in which Native American or Asian populations were larger.
Read more →
FactorDaily

FactorDaily is an Indian digital media publication founded in 2016 by Pankaj Mishra and Jayadevan PK. Mishra was formerly an Editor at TechCrunch and the Economic Times. The digital publication was launched with an intent to produce stories on the impact of technology on life in India. == History == FactorDaily began publishing in May 2016, with daily reported stories on technology, culture and life in India. Prior to its launch, the company had raised $1 million in seed funding from Accel India, Blume Ventures, Girish Mathrubootham of Freshdesk, Vijay Shekhar Sharma of PayTm, and Jay Vijayan of Tekion. Josey Puliyenthuruthel John, formerly Managing Editor at Business Today and National Corporate Editor at Mint, later joined the company as a Consulting Editor. In January 2017, FactorDaily launched its first Podcast called The Outliers. The inaugural episode featured a conversation with Manish Sharma of Printo on his journey starting up. == Awards == The FactorDaily team won the Bengaluru Editors Lab 2017, a journalism hackathon organised by the Global Editors Network (GEN). The story titled "India has 3,800 psychiatrists for 1.2bn people. Can tech step in to manage mental health?" won the first prize in the online category of the fifth Schizophrenia Research Foundation’s (SCARF) ‘Media for Mental Health’ awards. The story titled 'The dark hand of tech that stokes sex trafficking in India', won the Stop Slavery media Awards by the Thomson Reuters Foundation for the year 2020.
Read more →
Class activation mapping

Class activation mapping methods are explainable AI (XAI) techniques used to visualize the regions of an input image that are the most relevant for a particular task, especially image classification, in convolutional neural networks (CNNs). These methods generate heatmaps by weighting the feature maps from a convolutional layer according to their relevance to the target class. In the field of artificial intelligence, generically defined as "the effort to automate intellectual tasks normally performed by humans", machine learning and deep learning were created. They both use statistical and computational methods to learn patterns from data, reducing the need for manually coded rules. Machine learning models are trained on input data and the known respective answers, learning the underlying patterns or structures present in the data. Traditional Machine learning algorithms employ manually designed feature sets, posing a direct link between machine learning designers and employed features. Deep learning is a subfield of machine learning, based on the concept of successive layers of representation, in which the data is progressively unfolded in different ways, to extract relevant and informative patterns in data analysis. Deep learning algorithms are defined as feature learning algorithms automatically learning hierarchical feature representations from raw data, extracting increasingly abstract features through multiple layers. CNNs are a specific architecture of deep learning models, designed to process spatially structured data, such as images, exploiting a series of convolution, non-linear activation and pooling operations to extract relevant features, contained in the so-called feature maps from input data. CNNs have demonstrated to be highly effective in a variety of computer vision and image processing tasks. CNNs (and deep learning models more broadly) are described as black boxes due to their complex and non-transparent internal layers of representation. The need for clearer indications on its internal working and decision-making process gave birth to XAI techniques. Among the proposed XAI techniques for computer vision tasks, Class activation mapping methods can show which pixels in an input image are important to the predicted logit for a class of interest, in a classification task. Class activation mapping methods were originally developed for class-discriminative scenarios to visualize which parts of the input image influenced the classification decision, namely to visually highlight the regions of those feature maps that contribute most strongly to the prediction of a given class. More advanced versions of these methods are not limited to image classification tasks, but have been extended also to several vision-related tasks, such as object detection, image captioning, visual question answering and image segmentation. == Background == The following methods laid the groundwork for the class activation maps approaches, forming the conceptual basis of using gradients to highlight class-discriminative regions. === Class model visualization and saliency maps for convolutional neural networks === The class model visualization and image-specific saliency maps approaches have been presented in the foundational work "Deep Inside Convolutional Networks: Visualising Image Classification Models and Saliency Maps" by Karen Simonyan, Andrea Vedaldi, and Andrew Zisserman and it generalizes the deconvnet method by Zeiler and Fergus. Class model visualization synthesizes an artificial input image that strongly activates the output neurons associated with a target class. Given a trained, fixed model, this method starts with a zero-initialized image, backpropagates the gradients from the class score to the image pixels, updates the image pixels increasing the specific class scores and it repeats the pixel updating process, showing an encoded (idealized version) prototype of the class of interest. Image-specific class saliency visualization method provides a visual explanation by highlighting the most relevant pixels in an image for predicting a certain class C of interest. This is done by computing the gradient of the class score with respect to the input image, I 0 , {\displaystyle I_{0},} w = ∂ S C ∂ I | I 0 {\displaystyle w=\left.{\frac {\partial S_{C}}{\partial I}}\right|_{I_{0}}} approximating the model locally (around I 0 {\displaystyle I_{0}} ) as linear, using a first-order Taylor expansion: S C ( I ) ≈ w C T I + b {\displaystyle S_{C}(I)\approx w_{C}^{T}I+b} . The magnitude of w C {\displaystyle w_{C}} , the gradient, indicates the importancy of the pixels: larger gradients suggest greater influence on the prediction. Once the gradient is known, the saliency map is defined as the maximum absolute gradient across the color channels: M i j = m a x C | ∂ S C ∂ I i j C | {\displaystyle M_{ij}=max_{C}\left|{\frac {\partial S_{C}}{\partial I_{ij}^{C}}}\right|} resulting in an saliency map (i.e. heatmap). === Guided backpropagation === The concept of guided backpropagation can be traced for the first time in the paper by Springenberg et al. "Striving For Simplicity: The All Convolutional Net" and also this method builds upon the work by Zeiler and Fergus "Visualizing and Understanding Convolutional Networks". Guided backpropagation core is to understand what a CNN is learning, by visualizing the patterns that activate more strongly individual neurons (or filters), in architectures which do not rely on max-pooling layer. When propagating gradients back through a rectified linear unit (ReLU), guided backpropagation passes the gradient if and only if the input to the ReLU was positive (forward pass) and the output gradient is positive (backward signal), tackling both inactive neurons, negative gradients and suppressing the noise. The result displays sharper, high-resolution visualizations of what each neuron is responding to. Guided backpropagation represents a simple and practical method for model interpretability, helping understand how and where neural networks detect semantic concepts across layers. Moreover, it can be applied to any network architecture, due to its working principle. == Base versions == Class activation mapping and gradient-weighted class activation mapping are the original and most widely used methods for visual explanations in convolutional neural networks. These methods serve as the foundation for many later developments in explainable AI. Notation: In this article, the symbols i and j represent integer indices that disappear inside sums or averages, while x and y are the continuous (or up-sampled integer) coordinates of the final heat-map that is plotted. === Class activation mapping (CAM) === Class activation mapping (CAM) was the first, and the original, version of CAM methods, and it gave the name to the whole category. The approach was firstly introduced by Zhou et al. in their seminal work "Learning Deep Features for Discriminative Localization". This approach achieves class-specific heatmaps by modifying image classification CNN architectures, replacing fully-connected layers with convolutional layers and a final global average pooling layer. Its main scope is to localize and highlight discriminative regions of an input image that a CNN uses to identify a particular class, without needing explicit bounding box annotations. ==== Global average pooling (GAP) ==== Global average pooling (GAP) represents the key element in the original CAM approach. It is a dimensionality reduction technique and, similarly to other pooling layers, it allows the downsampling of the feature maps, calculating representative values for a specific region of the feature map. The particularity of GAP is that it calculates a single value for an entire feature map, significantly reducing the model dimensions. ==== Mathematical description ==== The mathematical description considers as its key the combination of convolutional and GAP layers. In CAM, it is mandatory to have the GAP layer after the last convolutional layer and before the final linear classifier layer. This last element of the architecture connects the output logits (the network predictions) y C {\displaystyle y^{C}} , to the GAP values, with its respective fine-tuned weights, w k C {\displaystyle w_{k}^{C}} . Considering A k {\displaystyle A^{k}} as the last feature maps of the last convolutional layer, GAP produces one value for each feature map, by averaging all the matrix elements (i, j) of the feature map: F k = 1 m n ∑ i = 1 m ∑ j = 1 n A i j k {\displaystyle F^{k}={\frac {1}{mn}}\sum _{i=1}^{m}\sum _{j=1}^{n}A_{ij}^{k}} with A k = [ A 11 k A 12 k ⋯ A 1 n k A 21 k A 22 k ⋯ A 2 n k ⋮ ⋮ ⋱ ⋮ A m 1 k A m 2 k ⋯ A m n k ] = { A i j k ∣ 1 ≤ i ≤ m , 1 ≤ j ≤ n } {\displaystyle A^{k}={\begin{bmatrix}A_{11}^{k}&A_{12}^{k}&\cdots &A_{1n}^{k}\\A_{21}^{k}&A_{22}^{k}&\cdots &A_{2n}^{k}\\\vdots &\vdots &\ddots &\vdots \\A_{m1}^{k}&A_{m2}^{k}&\cdots &A_{mn}^{k}\end{bmatrix}}=\left\{A_{
Read more →
Magnetoquasistatic field

A magnetoquasistatic field is a class of electromagnetic field in which a slowly oscillating magnetic field is dominant. A magnetoquasistatic field is typically generated by low-frequency induction from a magnetic dipole or a current loop. The magnetic near-field of such an emitter behaves differently from the more commonly used far-field electromagnetic radiation. At low frequencies the rate of change of the instantaneous field strength with each cycle is relatively slow, giving rise to the name "magneto-quasistatic". The near field or quasistatic region typically extends no more than a wavelength from the antenna, and within this region the electric and magnetic fields are approximately decoupled. Weakly conducting non-magnetic bodies, including the human body and many mineral rocks, are effectively transparent to magnetoquasistatic fields, allowing for the transmission and reception of signals through such obstacles. Also, long-wavelength (i.e. low-frequency) signals are better able to propagate round corners than shorter-wave signals. Communication therefore need not be line-of-sight. The communication range of such signals depends on both the wavelength and the electromagnetic properties of the intervening medium at the chosen frequency, and is typically limited to a few tens of meters. == Physical principles == The laws of primary interest are Ampère's circuital law (with the displacement current density neglected) and the magnetic flux continuity law. These laws have associated with them continuity conditions at interfaces. In the absence of magnetizable materials, these laws determine the magnetic field intensity H given its source, the current density J. H is not everywhere irrotational. However, it is solenoidal everywhere. == Equipment design == A typical antenna comprises a 50-turn coil around a polyoxymethylene tube with diameter 16.5 cm, driven by a class E oscillator circuit. Such a device is readily portable when powered by batteries. Similarly, a typical receiver consist of an active receiving loop with diameter of one meter, an ultra-low-noise amplifier, and a band-pass filter. In operation the oscillator drives current through the transmitting loop to create an oscillating magnetic field. This field induces a voltage in the receiving loop, which is then amplified. Because the quasistatic region is defined within one wavelength of the electromagnetic source, emitters are limited to a frequency range between about 1 kHz and 1 MHz. Reducing the oscillating frequency increases the wavelength and hence the range of the quasistatic region, but reduces the induced voltage in the receiving loops which worsens the signal-to-noise ratio. In experiments carried out by the Carnegie Institute of Technology, the maximum range reported by was 50 meters. == Applications == === Resonant inductive coupling === In resonant coupling, the source and receiver are tuned to resonate at the same frequency and are given similar impedances. This allows power as well as information to flow from the source to the receiver. Such coupling via the magnetoquasistatic field is called resonant inductive coupling and can be used for wireless energy transfer. Applications include induction cooking, induction charging of batteries and some kinds of RFID tag. === Communications === Conventional electromagnetic communication signals cannot pass through the ground. Most mineral rock is neither electrically conducting nor magnetic, allowing magnetic fields to penetrate. Magnetoquasistatic systems have been successfully used for underground wireless communication, both surface-to-underground and between underground parties. At extremely low frequencies, below about 1 kHz, the wavelength is long enough for long-distance communication, although at a slow data rate. Such systems have been installed in submarines, with the local antenna comprising a wire up to several kilometers in length and trailed behind the vessel when at or near the surface. === Position and orientation tracking === Wireless position tracking is being increasingly used in applications such as navigation, security, and asset tracking. Conventional position tracking devices use high frequencies or microwaves, including global positioning systems (GPS), ultra-wide band (UWB) systems, and radio frequency identification systems (RFID), but these systems can easily be blocked by obstacles in their path. Magnetoquasistatic positioning takes advantage of the fact that the fields are largely undisturbed when in the presence of human beings and physical structures, and can be used for both position and orientation tracking for ranges up to 50 meters. To accurately determine the orientation and position of a dipole/emitter, allowance must be made not only for the field pattern generated by the emitter, but also for the eddy-currents they induce in the earth, which create secondary fields detectable by the receivers. By using complex image theory to correct this field generation from earth, and by using frequencies on the order of a few hundred kilohertz to obtain the required signal-to-noise ratio (SNR), it is possible to analyze the position of the dipole through azimuthal orientation, θ {\displaystyle \theta } , and inclination orientation, ϕ {\displaystyle \phi } . A Disney research team has used this technology to effectively determine the position and orientation of an American football, something not traceable through conventional wave propagation techniques due to human body obstruction. They inserted an oscillator-driven coil, around the diameter of the center of the ball, to generate the magnetoquasistatic field. The signal was able to pass undisturbed through multiple players.
Read more →
Power cycling

Power cycling is the act of turning a piece of equipment, usually a computer, off and then on again. Reasons for power cycling include having an electronic device reinitialize its set of configuration parameters or recover from an unresponsive state of its mission critical functionality, such as in a crash or hang situation. Power cycling can also be used to reset network activity inside a modem. It can also be among the first steps for troubleshooting an issue. == Overview == Power cycling can be done manually, usually using the power switch on the device, or remotely, through some type of external device connected to the power input. In the data center environment, remote control power cycling can usually be done through a power distribution unit, over the network. In the home environment, this can be done through home automation powerline communications. Most Internet service providers publish a "how-to" on their website showing their customers the correct procedure to power cycle their devices. Power cycling is a common diagnostic procedure usually performed first when a computer system freezes. However, frequently power cycling a computer can cause thermal stress. Reset has an equal effect on the software but may be less problematic for the hardware as power is not interrupted. == Historical uses == On all Apollo missions to the moon, the landing radar was required to acquire the surface before a landing could be attempted. But on Apollo 14, the landing radar was unable to lock on. Mission control told the astronauts to cycle the power. They did, the radar locked on just in time, and the landing was completed. During the Rosetta mission to comet 67P/Churyumov–Gerasimenko, the Philae lander did not return the expected telemetry on awakening after arrival at the comet. The problem was diagnosed as "somehow a glitch in the electronics", engineers cycled the power, and the lander awoke correctly. During the launch of the billion dollar AEHF-6 satellite on 26 March 2020 by an Atlas V rocket from Cape Canaveral Space Force Station in Florida, a hold was called at T-46 seconds due to hydraulic system not responding as expected. The launch crew turned it off and back on, and the launch proceeded normally. In 2023 the Interstellar Boundary Explorer spacecraft stopped responding to commands after an anomaly. When gentler techniques failed, NASA resorted to rebooting the spacecraft with the remote equivalent of a power cycle.
Read more →