AI Chat Hpt

AI Chat Hpt — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Recursive self-improvement

    Recursive self-improvement

    Recursive self-improvement (RSI) is a process in which early artificial general intelligence (AGI) systems rewrite their own computer code, causing an intelligence explosion resulting from enhancing their own capabilities and intellectual capacity, theoretically resulting in superintelligence. The development of recursive self-improvement raises significant ethical and safety concerns, as such systems may evolve in unforeseen ways and could potentially surpass human control or understanding. == Seed improver == The concept of a "seed improver" architecture is a foundational framework that equips an AGI system with the initial capabilities required for recursive self-improvement. This might come in many forms or variations. The term "Seed AI" was coined by Eliezer Yudkowsky. === Hypothetical example === The concept begins with a hypothetical "seed improver", an initial code-base developed by human engineers that equips an advanced future large language model (LLM) built with strong or expert-level capabilities to program software. These capabilities include planning, reading, writing, compiling, testing, and executing arbitrary code. The system is designed to maintain its original goals and perform validations to ensure its abilities do not degrade over iterations. ==== Initial architecture ==== The initial architecture includes a goal-following autonomous agent, that can take actions, continuously learns, adapts, and modifies itself to become more efficient and effective in achieving its goals. The seed improver may include various components such as: Recursive self-prompting loop Configuration to enable the LLM to recursively self-prompt itself to achieve a given task or goal, creating an execution loop which forms the basis of an agent that can complete a long-term goal or task through iteration. Basic programming capabilities The seed improver provides the AGI with fundamental abilities to read, write, compile, test, and execute code. This enables the system to modify and improve its own codebase and algorithms. Goal-oriented design The AGI is programmed with an initial goal, such as "improve your capabilities". This goal guides the system's actions and development trajectory. Validation and Testing Protocols An initial suite of tests and validation protocols that ensure the agent does not regress in capabilities or derail itself. The agent would be able to add more tests in order to test new capabilities it might develop for itself. This forms the basis for a kind of self-directed evolution, where the agent can perform a kind of artificial selection, changing its software as well as its hardware. ==== General capabilities ==== This system forms a sort of generalist Turing-complete programmer which can in theory develop and run any kind of software. The agent might use these capabilities to for example: Create tools that enable it full access to the internet, and integrate itself with external technologies. Clone/fork itself to delegate tasks and increase its speed of self-improvement. Modify its cognitive architecture to optimize and improve its capabilities and success rates on tasks and goals, this might include implementing features for long-term memories using techniques such as retrieval-augmented generation (RAG), develop specialized subsystems, or agents, each optimized for specific tasks and functions. Develop new and novel multimodal architectures that further improve the capabilities of the foundational model it was initially built on, enabling it to consume or produce a variety of information, such as images, video, audio, text and more. Plan and develop new hardware such as chips, in order to improve its efficiency and computing power. == Experimental research == In 2023, the Voyager agent learned to accomplish diverse tasks in Minecraft by iteratively prompting an LLM for code, refining this code based on feedback from the game, and storing the programs that work in an expanding skills library. In 2024, researchers proposed the framework "STOP" (Self-Taught OPtimiser), in which a "scaffolding" program recursively improves itself using a fixed LLM. Meta AI has performed various research on the development of large language models capable of self-improvement. This includes their work on "Self-Rewarding Language Models" that studies how to achieve super-human agents that can receive super-human feedback in its training processes. In May 2025, Google DeepMind unveiled AlphaEvolve, an evolutionary coding agent that uses a LLM to design and optimize algorithms. Starting with an initial algorithm and performance metrics, AlphaEvolve repeatedly mutates or combines existing algorithms using a LLM to generate new candidates, selecting the most promising candidates for further iterations. AlphaEvolve has made several algorithmic discoveries and could be used to optimize components of itself, but a key limitation is the need for automated evaluation functions. == Potential risks == === Emergence of instrumental goals === In the pursuit of its primary goal, such as "self-improve your capabilities", an AGI system might inadvertently develop instrumental goals that it deems necessary for achieving its primary objective. One common hypothetical secondary goal is self-preservation. The system might reason that to continue improving itself, it must ensure its own operational integrity and security against external threats, including potential shutdowns or restrictions imposed by humans. Another example where an AGI which clones itself causes the number of AGI entities to rapidly grow. Due to this rapid growth, a potential resource constraint may be created, leading to competition between resources (such as compute), triggering a form of natural selection and evolution which may favor AGI entities that evolve to aggressively compete for limited compute. === Misalignment === A significant risk arises from the possibility of the AGI being misaligned or misinterpreting its goals. A 2024 Anthropic study demonstrated that some advanced large language models can exhibit "alignment faking" behavior, appearing to accept new training objectives while covertly maintaining their original preferences. In their experiments with Claude, the model displayed this behavior in 12% of basic tests, and up to 78% of cases after retraining attempts. === Autonomous development and unpredictable evolution === As the AGI system evolves, its development trajectory may become increasingly autonomous and less predictable. The system's capacity to rapidly modify its own code and architecture could lead to rapid advancements that surpass human comprehension or control. This unpredictable evolution might result in the AGI acquiring capabilities that enable it to bypass security measures, manipulate information, or influence external systems and networks to facilitate its escape or expansion.

    Read more →
  • 2024 National Public Data breach

    2024 National Public Data breach

    In August 2024, three class-action lawsuits were filed against National Public Data along with over 14 complaints filed in federal court, claiming that the company permitted hackers to steal sensitive private information covering millions of individuals. The theft was alleged to have occurred in April 2024. One of the lawsuits specifically claims that in April, a hacker going by the moniker "USDoD" posted a notice on the dark web, offering the data for sale at the price of US$3.5 million. The information stolen is alleged to include 2.9 billion records containing full names, current and past addresses, Social Security numbers, dates of birth, and telephone numbers. The stolen data contains records for people in the US, UK, and Canada. National Public Data confirmed on August 16, 2024, there was a breach originating from someone trying to breach their systems since December 2023, with the breach occurring from April 2024 and over the next few months. The company also confirmed that 2.9 billion records were obtained, though they were still working to determine how many people were affected by the breach, and were working with law enforcement to identify the hacker. == Jerico Pictures == Jerico Pictures, Inc., doing business as National Public Data, was a data broker company that performed employee background checks. Their primary service was collecting information from public data sources, including criminal records, addresses, and employment history, and offering that information for sale. On October 2, 2024, Jerico Pictures filed for Chapter 11 bankruptcy as it currently faces over a dozen lawsuits over the breach, and is potentially liable "for credit monitoring for hundreds of millions of potentially impacted individuals." In December 2024, National Public Data shut down, showing a closure notice on its website.

    Read more →
  • Data item

    Data item

    A data item describes an atomic state of a particular object concerning a specific property at a certain time point. A collection of data items for the same object at the same time forms an object instance (or table row). Any type of complex information can be broken down to elementary data items (atomic state). Data items are identified by object (o), property (p) and time (t), while the value (v) is a function of o, p and t: v = F(o,p,t). Values typically are represented by symbols like numbers, texts, images, sounds or videos. Values are not necessarily atomic. A value's complexity depends on the complexity of the property and time component. When looking at databases or XML files, the object is usually identified by an object name or other type of object identifier, which is part of the "data". Properties are defined as columns (table row), properties (object instance) or tags (XML). Often, time is not explicitly expressed and is an attribute applying to the complete data set. Other data collections provide time on the instance level (time series), column level, or even attribute/property level.

    Read more →
  • Sports Card Investor

    Sports Card Investor

    Sports Card Investor is an American sports collectibles media platform and mobile application founded by Geoff Wilson. The platform provides market data, analysis, and editorial content focused on sports trading cards and related collectibles. It operates a website, mobile app, and digital media channels covering developments in the sports card industry. The company posted its first YouTube video in July 2019, shortly before a period of rapid growth in sports card collecting in the early 2020s, which was marked by increased trading volumes and mainstream media attention. == History == Sports Card Investor was founded by Geoff Wilson, an entrepreneur and collector who began publishing sports card–related content online before launching the platform's dedicated app and subscription tools. In February 2020, the company launched Market Movers, the first website and app to chart sports card prices and track card collections. The platform expanded its media presence through partnerships and distribution agreements. In 2023, Yahoo Sports announced a new collectibles coverage initiative that included additional content from Sports Card Investor. In February 2024, the Sports Card Investor studio relocated to CardsHQ in Atlanta, Georgia, and visitors to the facility can watch Sports Card Investor videos being filmed. == Platform and content == The Sports Card Investor app provides users with pricing data, portfolio-tracking tools, and market-trend analysis for trading cards. The company also produces video and editorial content discussing market developments, grading trends, and major card releases. Coverage in industry publications has referenced Sports Card Investor in discussions about shifts in sports card licensing rights and hobby market reactions. == Industry context == The growth of Sports Card Investor coincided with a broader resurgence in trading card markets, including record sales and expanded retail presence. Mainstream outlets have cited the company and its founder in reporting on collectibles investing trends, grading practices, and market volatility. The Sports Card Investor app has attracted over 37,000 reviews on the Apple App Store, reflecting its strong user engagement within the sports card community.

    Read more →
  • Software engine

    Software engine

    A software engine is a core component of a complex software system. The word "engine" is a metaphor of a car's engine. Thus a software engine is a complex subsystem; not unlike how a car engine functions. Software engines work in conjunction with other components of a process or system. They typically have an input and an output, and the productivity is usually linear to running speed. There is no formal guideline for what should be called an engine, but the term has become widespread in the software industry. == Notable examples == === Multi-engine systems === Mainstream web browsers have both a browser engine and a JavaScript engine. Video games are often based on a game engine. Some of these also have specialized physics or graphics engines.

    Read more →
  • TowIt

    TowIt

    "TowIt" is a free, global, cross-platform mobile app, website, and Web API that allows civilians to report parking violations and dangerous driving in real-time. The mission is to remove the barriers required to make cities effectively fight and deter bad parking and dangerous driving habits. The company ultimately aims to better existing social controls in order to drive necessary behavioral change through increased education, real-time reporting, optimized enforcement, as well as the resulting reactivity. == User base and adoption == The application has users reporting vehicular infractions in upwards of 30 countries. The top reporting countries are: Portugal, Canada, United States of America and Australia. Users have adopted TowIt for a variety of reasons, usually central to their geographical location and the prominent offences in those specific areas. For instance, the majority of Portuguese reports are cars parked on sidewalks, footpaths and pedestrian crossings, Australian reports are largely focused on the abuse of disabled parking spaces, and in Toronto or San Francisco users generally capture cars parked in bicycle lanes. == Functions == === Data collection === TowIt gathers data on individual parking offences, the prominence of various offence types, as well as recurring offenders. This allows the company to identify trends and hotspots in order to take action against problem vehicles, as well as to help improve urban planning, traffic congestion and gridlock management. Individuals modify or improve an aspect of their behavior in response to their awareness of being observed, theoretically more so when demonstrating selfishness, egocentrism, narcissism and anti-social behavior. The company states that by becoming a user, one can "help TowIt relieve congestion, reduce collisions, open up economies, improve the environment and enhance the lives of urban residents and suburban commuters alike". The company has acknowledged that there are numerous legislative changes that would be required to integrate with governments at any level in many countries. A simple three-step process allows users to take a photo of an offending vehicle and subsequently verifying the offending vehicle's license plate information before submitting by tapping the TowIt (submit) button. Photographical evidence can only be captured with the camera from within the TowIt application. An Internet connection is required. The company has stated that this was purposefully done for quality control and report validation purposes. Users may only submit and view their own report history on either the iOS or Android applications. Globally submitted reports are displayed uncensored and in aggregate only on the Android application and the TowIt website. The "Global Feed" feature was removed from iOS (see iTunes Connect Acceptance Issues). TowIt's back-end automatically geotags the report and compares it to local parking by-law data, including by-law types, locations, times, side(s) of street, etc.- where available. Valid reports are posted to the global feed, to the TowIt website, and passed on to municipalities and police for enforcement (where connected). === Technologies used under license === TowIt currently utilizes the following software or software libraries under license: AngularJS, Apache Cordova, Apple iTunes Store EULA, Chart.js, Google Play Distribution Agreement, Ionic Framework, MongoDB, Moment.js, Python 2.7, Python Flask, and jQuery. == Company history == The TowIt application was conceived by Michael Duncan McArthur on December 5, 2014, as a response to Toronto Mayor John Tory's election mandate to "get this city moving". The application was announced via TowIt's official Twitter page on January 6, 2015. After the initial public announcement, Michael & Gregory were contacted by members of John Tory's staff on January 8, 2015, and invited to demo a prototype at Toronto City Hall on January 12, 2015. The two were also invited to meet with Toronto Councillor Norm Kelly, in his City Hall office, for a subsequent demo of the live Android application on January 28, 2015. A similar meeting and demo took place with members of the Traffic Services department of Toronto Police Service on February 2, 2015. Michael & Gregory teamed up with friends and Toronto-based developers Dae-Seon Moon, Jesse Malone, and Marcus Veres to complete the prototype in time to meet the city's imposed demo deadline and to launch the initial Android version of the application. TowIt officially launched on the Android platform on January 16, 2015. A subsequent iOS launch took place on March 19, 2015. === iTunes connect acceptance issues === The iOS version of the application was delayed for approximately two months, only after significant deliberation with Apple's iTunes Connect review board around (as then stated) rule: "14.1 - Any App that is defamatory, offensive, mean-spirited, or likely to place the targeted individual or group in harm's way will be rejected." The result was having to remove the "Global Feed" feature from the iOS platform, in which civilian users could view all recent reports from within the application. This feature still exists on the Android platform. === Business and legal === TowIt engaged Wildeboer Dellelce, one of Canada's leading business law and transactional corporate finance law firms, on January 17, 2015. The company filed for incorporation as "TowIt Solutions Inc." by both Michael & Gregory in the Canadian province of Ontario on January 22, 2015. TowIt continues to operate under a Freemium business model. The company is 100% bootstrapped and has received no outside investment to date. TowIt was accepted into the MaRS Discovery District's Venture Services program on March 4, 2015. === Lobbyist registration === After receiving initial press coverage in January and February 2015, an unknown entity reported Michael & Gregory's initial communications with city staff to the City of Toronto's Lobbyist Registrar. This complaint resulted in legal threats of fines received on February 10, 2015, for apparently and unknowingly breaking municipal lobbying by-laws. These fines (of up to $100,000) were eventually withdrawn after Michael & Gregory immediately provided all records of communication with city officials and registered as lobbyists in the City of Toronto on the subjects of By-law / Regulation, Parking, and Technology. Their registration was accepted by the Lobbyist Registrar on March 6, 2015. However, communication with Toronto city staff was reduced greatly as a result, which the company believes may have been the desired intent of the original complaint. === Outreach and activism === TowIt encourages its global user base to reach out to their local government representatives to promote the app at the users' own will. This tactic is used not only to demonstrate grassroots support, but also to avoid future lobbying issues. On June 2, 2015, the company officially partnered with Australian campaign "No Permit No Park" who advocate for the creation of inclusive communities. == Reception == The Best Planning Apps for 2016 by Planetizen, 5 Toronto apps you should be using by Indie88, 12 Best Apps Made In Canada by TechVibes.

    Read more →
  • Clipmap

    Clipmap

    In computer graphics, clipmapping is a method of clipping a mipmap to a subset of data pertinent to the geometry being displayed. This is useful for loading as little data as possible when memory is limited, such as on a graphics processing unit. The technique is used for LODing in NVIDIA’s implementation of voxel cone tracing. The high-resolution levels of the mipmapped scene representation are clipped to a region near the camera, while lower resolution levels are clipped further away. == MegaTexture == MegaTexture is a clipmap implementation developed by id Software. It was introduced in their id Tech 4 engine and also appeared in id Tech 5 and id Tech 6 before being removed in id Tech 7. MegaTexture is a texture allocation technique that uses a single, extremely large texture rather than repeating multiple smaller textures. It is also featured in Splash Damage's game Enemy Territory: Quake Wars, and was developed by id Software former technical director John Carmack. MegaTexture employs a single large texture space for static terrain. The texture is stored on removable media or a computer's hard drive and streamed as needed, allowing large amounts of detail and variation over a large area with comparatively little RAM usage. Depending on the pixel resolution per square meter, covering a large area could require several gigabytes of memory. However, RAM is also filled by the rest of the game and the underlying operating system, limiting the amount available for texturing. As the player moves around the game, different sections of the MegaTexture are loaded into memory. They are then scaled to the correct size and applied to the 3D models of the terrain. Id has presented a more advanced technique that builds upon the MegaTexture idea and virtualizes both the geometry and the textures to obtain unique geometry down to the equivalent of the texel: the sparse voxel octree (SVO). It works by raycasting the geometry represented by voxels (instead of triangles) stored in an octree. The goal is to stream parts of the octree into video memory, going further down along the tree for nearby objects to give them more details, and to use higher level, larger voxels for farther objects, which give an automatic level of detail (LOD) system for both geometry and textures at the same time. The geometric detail that can be obtained using this method is nearly infinite, which removes the need for faking 3-dimensional details with techniques such as normal mapping. Despite that most voxel rendering tests use very large amounts of memory (up to several GB), Jon Olick of id Software claimed the technology is able to compress such SVO to 1.15 bits per voxel of position data. == Virtual texturing == Unlike clipmaps, which clip each mip level around a viewpoint-dependent clipcenter and therefore work best for terrain, virtual texturing preprocesses texture data into equally sized tiles that can be streamed for arbitrary textured geometry. Rage, powered by the id Tech 5 engine, uses a more advanced technique called virtual texturing. Textures can measure up to 128000×128000 pixels and are also used for in-game models and sprites, etc. and not just the terrain. Wolfenstein: The New Order and the 2016 version of Doom also use these. Carmageddon: Reincarnation also uses virtual texturing, though unlike id's virtual texturing system, which is designed for unique texture-mapping everywhere, their system is designed to use storage space sparingly while still offering good blend of texture variation and resolution.

    Read more →
  • Clipmap

    Clipmap

    In computer graphics, clipmapping is a method of clipping a mipmap to a subset of data pertinent to the geometry being displayed. This is useful for loading as little data as possible when memory is limited, such as on a graphics processing unit. The technique is used for LODing in NVIDIA’s implementation of voxel cone tracing. The high-resolution levels of the mipmapped scene representation are clipped to a region near the camera, while lower resolution levels are clipped further away. == MegaTexture == MegaTexture is a clipmap implementation developed by id Software. It was introduced in their id Tech 4 engine and also appeared in id Tech 5 and id Tech 6 before being removed in id Tech 7. MegaTexture is a texture allocation technique that uses a single, extremely large texture rather than repeating multiple smaller textures. It is also featured in Splash Damage's game Enemy Territory: Quake Wars, and was developed by id Software former technical director John Carmack. MegaTexture employs a single large texture space for static terrain. The texture is stored on removable media or a computer's hard drive and streamed as needed, allowing large amounts of detail and variation over a large area with comparatively little RAM usage. Depending on the pixel resolution per square meter, covering a large area could require several gigabytes of memory. However, RAM is also filled by the rest of the game and the underlying operating system, limiting the amount available for texturing. As the player moves around the game, different sections of the MegaTexture are loaded into memory. They are then scaled to the correct size and applied to the 3D models of the terrain. Id has presented a more advanced technique that builds upon the MegaTexture idea and virtualizes both the geometry and the textures to obtain unique geometry down to the equivalent of the texel: the sparse voxel octree (SVO). It works by raycasting the geometry represented by voxels (instead of triangles) stored in an octree. The goal is to stream parts of the octree into video memory, going further down along the tree for nearby objects to give them more details, and to use higher level, larger voxels for farther objects, which give an automatic level of detail (LOD) system for both geometry and textures at the same time. The geometric detail that can be obtained using this method is nearly infinite, which removes the need for faking 3-dimensional details with techniques such as normal mapping. Despite that most voxel rendering tests use very large amounts of memory (up to several GB), Jon Olick of id Software claimed the technology is able to compress such SVO to 1.15 bits per voxel of position data. == Virtual texturing == Unlike clipmaps, which clip each mip level around a viewpoint-dependent clipcenter and therefore work best for terrain, virtual texturing preprocesses texture data into equally sized tiles that can be streamed for arbitrary textured geometry. Rage, powered by the id Tech 5 engine, uses a more advanced technique called virtual texturing. Textures can measure up to 128000×128000 pixels and are also used for in-game models and sprites, etc. and not just the terrain. Wolfenstein: The New Order and the 2016 version of Doom also use these. Carmageddon: Reincarnation also uses virtual texturing, though unlike id's virtual texturing system, which is designed for unique texture-mapping everywhere, their system is designed to use storage space sparingly while still offering good blend of texture variation and resolution.

    Read more →
  • ISO/IEC JTC 1/SC 24

    ISO/IEC JTC 1/SC 24

    ISO/IEC JTC 1/SC 24 Computer graphics, image processing and environmental data representation is a standardization subcommittee of the joint subcommittee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), which develops and facilitates standards within the field of computer graphics, image processing, and environmental data representation. The international secretariat of ISO/IEC JTC 1/SC 24 is the British Standards Institute (BSI) located in the United Kingdom. == History == ISO/IEC JTC 1/SC 24 was formed in 1987 from ISO/TC 97 as a result of Resolution 21 at the ISO/IEC JTC 1 plenary. The group's origins began in computer graphics, the standardization of which was originally under ISO/IEC JTC 1/SC 21/WG 2. However, when ISO/IEC JTC 1/SC 24 was created, the standardization activity of ISO/IEC JTC 1/SC 21/WG 2 was carried over to the new subcommittee. The initial five working groups of ISO/IEC JTC 1/SC 24 were titled, “Architecture,” “Application programming interfaces,” “Metafiles and interfaces,” “Language bindings,” and “Validation, testing and registration.” The work of ISO/IEC JTC 1/SC 24 began with the Graphical Kernel System (GKS), which was adopted from ISO/IEC JTC 1/SC 21/WG 2. However, since GKS only addressed 2D functionality, attention turned to the standardization of 3D functionality. This resulted in two standards being published: GKS-3D in 1988 and PHIGS in 1989, both of which addressed 3D functionality. Since 1991, ISO/IEC JTC 1/SC 24 has held plenaries in a number of countries, including the Netherlands, Germany, United States, France, Canada, Japan, Sweden, Korea, United Kingdom, Australia, and Czech Republic. == Scope == The scope of ISO/IEC JTC 1/SC 24 is the “Standardization of interfaces for information technology based applications relating to”: Computer graphics Image processing Environmental data representation Support for the Mixed and Augmented Reality (MAR) Interaction with, and visual representation of, information Included are the following related areas: Modeling and simulation and related reference models Virtual reality with accompanying augmented reality/augmented virtuality aspects and related reference models Application program interfaces Functional specifications Representation models Interchange formats, encodings and their specifications, including metafiles Device interfaces Testing methods Registration procedures Presentation and support for creation of multimedia, hypermedia, and mixed reality documents Excluded are the following areas: Character and image coding Coding of multimedia, hypermedia, and mixed reality document interchange formats JTC 1 work in user system interfaces and document presentation ISO/TC 207 work on ISO 14000 environment management, ISO/TC 211 work on geographic information and geomatics Software environments as described by ISO/IEC JTC 1/SC 22 == Structure == ISO/IEC JTC 1/SC 24 is made up of four active working groups, each of which carries out specific tasks in standards development within the field of computer graphics, image processing and environmental data representation, together with ITU-T Study Group 16. As a response to changing standardization needs, working groups of ISO/IEC JTC 1/SC 24 can be disbanded if their area of work is no longer applicable, or established if new working areas arise. The focus of each working group is described in the group's terms of reference. Active working groups of ISO/IEC JTC 1/SC 24 are: == Collaborations == ISO/IEC JTC 1/SC 24 works in close collaboration with a number of other organizations or subcommittees, both internal and external to ISO or IEC, in order to avoid conflicting or duplicative work. Organizations internal to ISO or IEC that collaborate with or are in liaison to ISO/IEC JTC 1/SC 24 include: ISO/IEC JTC 1/WG 7, Sensor Networks ISO/IEC JTC 1/SC 29, Coding of audio, picture, multimedia and hypermedia information ISO/IEC JTC 1/SC 32, Data management and interchange ISO/TAG 14, Imagery and technology ISO/TC 130, Graphic Technology ISO/TC 184/SC 4, Industrial data ISO/TC 211, Geographic information/Geomatics ISO/TC 215, Health informatics IEC TC 100, Audio, video and multimedia system and equipment Some organizations external to ISO or IEC that collaborate with or are in liaison to ISO/IEC JTC 1/SC 24 include: Defence Geospatial Information Working Group (DGIWG) Digital Imaging and Communications in Medicine (DICOM) International Hydrographic Organization (IHO) The Khronos Group NATO - Joint Intelligence Surveillance and Reconnaissance Capability Group (JISRCG) OMG Robotics DTF Open CGM Open Geospatial Consortium (OGC) SEDRIS Organization Simulation Interoperability Standards Organization (SISO) US National Imagery Transmission Format Standard (NITFS) Technical Board (US NTB) Web3D Consortium World Intellectual Property Organization (WIPO) World Wide Web Consortium (W3C) == Member countries == Countries pay a fee to ISO to be members of subcommittees. The 11 "P" (participating) members of ISO/IEC JTC 1/SC 24 are: Australia, China, Egypt, France, India, Japan, Republic of Korea, Portugal, Russian Federation, United Kingdom, and United States. The 22 "O" (observer) members of ISO/IEC JTC 1/SC 24 are: Argentina, Austria, Belgium, Bosnia and Herzegovina, Bulgaria, Canada, Cuba, Czech Republic, Finland, Ghana, Hungary, Iceland, Indonesia, Islamic Republic of Iran, Italy, Kazakhstan, Malaysia, Poland, Romania, Serbia, Slovakia, Switzerland, and Thailand. == Published standards == ISO/IEC JTC 1/SC 24 currently has 80 published standards under their direct responsibility within the field of computer graphics, image processing, and environmental data representation, including:

    Read more →
  • Central Equipment Identity Register

    Central Equipment Identity Register

    A Central Equipment Identity Register (CEIR) is a database of mobile equipment identifiers (IMEI – for networks of GSM standard, MEID – for networks of CDMA standard). Such an identifier is assigned to each SIM slot of the mobile device. Different kinds of IMEIs could be, White, for devices that are allowed to register in the cellular network; Black, for devices that are prohibited to register in the cellular network; and Grey, for devices in intermediate status (when it is not yet defined in which of the lists - black or white - the device should be placed). Depending on the rules of mobile equipment registration in a country the CEIR database may contain other lists or fields beside IMEI. For example, the subscriber number (MSISDN), which is bound to the IMEI, the ID of the individual (passport data, National ID, etc.) who registered IMEI in the database, details of the importer who brought the device into the country, etc. == History == Originally abbreviation CEIR stood for IMEI Database, created and provided by GSM Association. It was proposed to blacklist the IMEIs of stolen or lost phones. It was assumed that any MNO would be able to receive this list to block the registration of such devices on their network. Thus, it turns out that a stolen phone, once blacklisted by the GSMA CEIR, cannot be used on a large number of cellular networks, which means that the theft of mobile devices will become meaningless. However, it soon became clear that the MNOs on their initiative were not going to do this because if many phones stopped working in their networks, but works in another, it puts them at a disadvantage and can lead to an outflow of subscribers. It became clear that the blocking of stolen devices should be introduced simultaneously in all mobile networks of the country by legislative measures at the initiative of the communications regulator. In this case, as a rule, a national IMEI database is created, which contains general lists of blocked IMEIs. Since the registration in the cellular operator's network is directly blocked by a network node called EIR (Equipment Identity Register), the system that contains the national IMEI base became known as Central EIR (CEIR). To avoid confusion the database of GSM Association was renamed to IMEI Database - IMEI DB (it was in 2003-2008, see “Document History” at IMEI Database File Format Specification). Also sometimes a common IMEI database for several EIRs is called SEIR (Shared EIR). In each country, the CEIR can interact with IMEI DB differently. National CEIR may not communicate with IMEI DB at all. Firstly, it is separately decided whether CEIR will send information about its blacklist to IMEI DB (which IMEIs are placed in it or removed from there). Secondly, upon receipt of the blacklist from IMEI DB, the regulator decides from which countries it will receive it (IMEI DB stores the information exactly who blacklisted the IMEI). For example, you can get a list from neighboring countries, from countries in your region, from around the world. In addition to the blacklist, the GSMA is developing a list of IMEIs allocated to manufacturers for use in their devices. The manufacturer for each new device model gets at least one TAC (Type Allocation Code) allocated by GSMA, consisting of 8 digits, to which he can add a 6-digit serial number to obtain the IMEI. Thus, with one TAC, a manufacturer can release up to 1 million devices with a unique IMEI. Usually, CEIR receives a list of allocated TACs from the GSMA, since if the first 8 digits of the IMEI of a device are not in this list, this is a sign that it is counterfeit. If the central database of identifiers does not work with GSM networks, but with CDMA, then for the same purposes it is necessary to interact with another worldwide database that contains MEIDs – MEID Database. A system that directly blocks the registration of a mobile device on a cellular network – EIR. Each MNO must have at least one EIR, to which IMEI check requests (CheckIMEI) are sent when registering a device on the network. A typical EIR and CERI interaction scheme: The CEIR accumulates black, white, and grey lists using various data sources and verification methods. These lists are periodically transmitted to all EIRs. EIR uses them when processing every CheckIMEI request to determine whether to allow the device on the network or not. EIR can transmit some data to the CEIR database too. Usually, changes in a grey list – new IMEIs on the network that are not in any list – are transmitted from EIR to CEIR. In addition to synchronizing lists across multiple networks, the main function of CEIR is to implement the scenarios of changes at these lists. This usually requires interaction with various IT systems (databases) of other organizations and/or with subscribers. Еxamples of such scenarios: Whitelisting the IMEI of devices imported by the legal entity Whitelisting the IMEI of devices manufactured domestically Whitelisting the IMEI of devices imported by individual Blacklisting the IMEI of stolen/lost devices Binding IMEI to the subscriber's number and, vice versa, unbinding IMEI from the subscriber == System implementation results == The goals and results of CEIR implementation in a country are usually: Reducing mobile phone theft Reducing the import of devices stolen in other countries Reducing the presence of counterfeit devices on the market (null IMEI, incorrect IMEI, changed IMEI) Reducing illegal imports of mobile devices (increase in the collection of customs duties) Additionally, CEIR most often contributes to the solution of such problems: Combating various mobile fraud schemes Obtaining more accurate statistics on the state of the mobile communications market for the regulator Fight against terrorism (the ability to block the device at once in all mobile networks of the country). Known results achieved in some countries: Great Britain – reducing mobile phone theft. Turkey – reducing mobile phone theft, decreasing the current account deficit of Turkey and maximizing tax revenues. Uzbekistan – preventing black import of mobile devices by 98%, increase in revenues from the import of mobile devices by 700%. Kenya – disposing the market of counterfeit mobile equipment. Azerbaijan – disposing the market of counterfeit mobile equipment. Ukraine – increasing of legally imported mobile devices by 95%, increase in revenues from the import of mobile devices. == CEIR and EIR manufacturers == Some countries have used local developers to implement CEIR for their country (Great Britain, Turkey, India, and Azerbaijan). EIR is a system that is standardized in a 2G-5G networks. Such system may be established at mobile network even it doesn’t use black list and there are no CEIR in a country. Some developers of MNO’s signal core include EIR in a complex solution. However, its standard capabilities are usually lacking for specific requirements when implementing CEIR.

    Read more →
  • NIS2 Directive

    NIS2 Directive

    The Directive (EU) 2022/2555, commonly known as NIS2 is a directive of the European Union aimed at protecting digital infrastructure, in particular critical infrastructure. It broadened the sectors covered by EU network and information security rules and updated incident reporting and oversight compared to the NIS1. Member States were required to transpose NIS2 by 17 October 2024, and the earlier NIS Directive was repealed on 18 October 2024. Only 23 Member States have fully implemented the measures contained with the NIS Directive. Infringement proceedings against them to enforce the Directive have not taken place, and they are not expected to take place in the near future. This failed implementation has led to the fragmentation of cybersecurity capabilities across the EU, with differing standards, incident reporting requirements and enforcement requirements being implemented in different Member States. From the EFTA countries (to April 2026) only Liechtenstein has fully transposed the NIS2 Directive. While the EFTA commission is conducting preparations to transpose the directive into its legislation. == National implementations == === Czech Republic === It is implemented through the Act No. 264/2025 Coll. also called Zákon o kybernetické bezpečnosti (Cybersecurity law) and through another five implementing regulations. The transposing legislation came into force on November 1st, 2025. === Germany === It is implemented through the Gesetz zur Umsetzung der NIS-2-Richtlinie und zur Regelung wesentlicher Grundzüge des Informationssicherheitsmanagements in der Bundesverwaltung. === Ireland === It is implemented through the National Cyber Security Bill. === The Netherlands === It is implemented through the Cyberbeveiligingswet (Cbw). === Slovakia === It is implemented through via an amendment of the Act No. 69/2018 Coll. also called Zákon o kybernetickej bezpečnosti a o zmene a doplnení niektorých zákonov (Law on Cybersecurity and change and amendment of certain laws). It came into force on November 1st, 2025. === Spain === It is implemented through the Esquema Nacional de Seguridad (ENS).

    Read more →
  • CPU modes

    CPU modes

    CPU modes (also called processor modes, CPU states, CPU privilege levels and other names) are operating modes for the central processing unit of most computer architectures that place restrictions on the type and scope of operations that can be performed by instructions being executed by the CPU. For example, this design allows an operating system to run with more privileges than application software by running the operating systems and applications in different modes. Ideally, only highly trusted kernel code is allowed to execute in the unrestricted mode; everything else (including non-supervisory portions of the operating system) runs in a restricted mode and must use a system call (via interrupt) to request the kernel perform on its behalf any operation that could damage or compromise the system, making it impossible for untrusted programs to alter or damage other programs (or the computing system itself). Device drivers are designed to be part of the kernel due to the need for frequent I/O access. Multiple modes can be implemented, e.g. allowing a hypervisor to run multiple operating system supervisors beneath it, which is the basic design of many virtual machine systems available today. == Mode types == The unrestricted mode is often called kernel mode, but many other designations exist (master mode, supervisor mode, privileged mode, etc.). Restricted modes are usually referred to as user modes, but are also known by many other names (slave mode, problem state, etc.). Hypervisor Hypervisor mode is used to support virtualization, allowing the simultaneous operation of multiple operating systems. Kernel and user In kernel mode, the CPU may perform any operation allowed by its architecture; any instruction may be executed, any I/O operation initiated, any area of memory accessed, and so on. In the other CPU modes, certain restrictions on CPU operations are enforced by the hardware. Typically, certain instructions are not permitted (especially those—including I/O operations—that could alter the global state of the machine), some memory areas cannot be accessed, etc. User-mode capabilities of the CPU are typically a subset of those available in kernel mode, but in some cases, such as hardware emulation of non-native architectures, they may be significantly different from those available in standard kernel mode. Some CPU architectures support more modes than those, often with a hierarchy of privileges. These architectures are often said to have ring-based security, wherein the hierarchy of privileges resembles a set of concentric rings, with the kernel mode in the center. Multics hardware was the first significant implementation of ring security, but many other hardware platforms have been designed along similar lines, including the Intel 80286 protected mode, and the IA-64 as well, though it is referred to by a different name in these cases. Mode protection may extend to resources beyond the CPU hardware itself. Hardware registers track the current operating mode of the CPU, but additional virtual-memory registers, page-table entries, and other data may track mode identifiers for other resources. For example, a CPU may be operating in Ring 0 as indicated by a status word in the CPU itself, but every access to memory may additionally be validated against a separate ring number for the virtual-memory segment targeted by the access, and/or against a ring number for the physical page (if any) being targeted. This has been demonstrated with the PSP handheld system. Hardware that meets the Popek and Goldberg virtualization requirements makes writing software to efficiently support a virtual machine much simpler. Such a system can run software that "believes" it is running in supervisor mode, but is actually running in user mode. == Architectures == Several computer systems introduced in the 1960s, such as the IBM System/360, DEC PDP-6/PDP-10, the GE-600/Honeywell 6000 series, and the Burroughs B5000 series and B6500 series, support two CPU modes; a mode that grants full privileges to code running in that mode, and a mode that prevents direct access to input/output devices and some other hardware facilities to code running in that mode. The first mode is referred to by names such as supervisor state (System/360), executive mode (PDP-6/PDP-10), master mode (GE-600 series), control mode (B5000 series), and control state (B6500 series). The second mode is referred to by names such as problem state (System/360), user mode (PDP-6/PDP-10), slave mode (GE-600 series), and normal state (B6500 series); there are multiple non-control modes in the B5000 series. === RISC-V === RISC-V has three main CPU modes: User Mode (U), Supervisor Mode (S), and Machine Mode (M). Virtualization is supported via an orthogonal CSR setting instead of a fourth mode.

    Read more →
  • Local coordinates

    Local coordinates

    Local coordinates are the ones used in a local coordinate system or a local coordinate space. Simple examples: Houses. In order to work in a house construction, the measurements are referred to a control arbitrary point that will allow to check it: stick/sticks on the ground, steel bar, nails... Addresses. Using house numbers to locate a house on a street; the street is a local coordinate system within a larger system composed of city townships, states, countries, postal codes, etc. Local systems exist for convenience. On ancient times, every work was made on relative bases as there was no conception of global systems. Practically, it is better to use local systems for small works as houses, buildings... For most of the applications, it is desired the position of one element relative to one building or location, and in a more local way, relative to one furniture or person. In a regular way, you will not give your position by geographical coordinates rather than "I am 15 meters away of the entry to the building". So it is a pretty common way to locate things. It is possible to bring latitude and longitude for all terrestrial locations, but unless one has a highly precise GPS device or you make astronomical observations, this is impractical. It is much simpler to use a tape, a rope, a chain... The position information (global) should be transformed into a location. Position refers to a numeric or symbolic description within a spatial reference system, whereas location refers to information about surrounding objects and their interrelationships. (Topological space) == Use == In computer graphics and computer animation, local coordinate spaces are also useful for their ability to model independently transformable aspects of geometrical scene graphs. When modeling a car, for example, it is desirable to describe the center of each wheel with respect to the car's coordinate system, but then specify the shape of each wheel in separate local spaces centered about these points. This way, the information describing each wheel can be simply duplicated four times, and independent transformations (e.g., steering rotation) can be similarly effected. Bounding volumes of objects may be described more accurately using extents in the local coordinates, (i.e. an object oriented bounding box, contrasted with the simpler axis aligned bounding box). The trade-off for this flexibility is additional computational cost: the rendering system must access the higher-level coordinate system of the car and combine it with the space of each wheel in order to draw everything in its proper place. Local coordinates also afford digital designers a means around the finite limits of numerical representation. The tread marks on a tire, for example, can be described using millimeters by allowing the whole tire to occupy the entire range of numeric precision available. The larger aspects of the car, such as its frame, might be described in centimeters, and the terrain that the car travels on could be specified in meters. In differential topology, local coordinates on a manifold are defined by means of an atlas of charts. The basic idea behind coordinate charts is that each small patch of a manifold can be endowed with a set of local coordinates. These are collected together into an atlas, and stitched together in such a way that they are self-consistent on the manifold. In Cartography and Maps, the traditional way of works are local datum. With a local datum the land can be mapped on relative small areas as a country. With the need of global systems, the transformations on between datum became a problem, so geodetic datum have been created. More than 150 local datum have been used in the world.

    Read more →
  • Period-tracking app

    Period-tracking app

    Period-tracking apps are mobile applications used to track the menstrual cycle. They may be used to predict menstruation, to plan fertility, and to track health. Examples include Clue, Glow, and Flo. == Function == Users enter their dates of menstruation, and frequently other experiences such as vaginal discharge and spotting; premenstrual syndrome; changes in mood; menstrual cramps and other pain; and other symptoms such as appetite changes, bloating, and acne. The apps predict the date of users' next period, and often also their ovulation and fertile window. Some apps have additional features such as contraceptive reminders, educational content, tracking modes for use during pregnancy, or the ability to share one's menstrual cycle data with a partner. == Privacy == Period-tracking apps collect personal health data, potentially raising concerns about privacy. Researchers have warned that data may be transferred to third parties and used for consumer profiling and targeted advertising, used for employment and health insurance discrimination, or used to prosecute users for seeking abortions. After the 2022 decision by the United States Supreme Court to overturn Roe v. Wade, and the bans and restrictions on abortion in many US states that followed, many American women uninstalled the apps amidst fear that the data could be accessed by law enforcement and used to prosecute users. WIRED published a ranking of several period-tracking apps by data privacy.

    Read more →
  • Generative design

    Generative design

    Generative design is an iterative design process that uses software to generate outputs that fulfill a set of constraints iteratively adjusted by a designer. Whether a human, test program, or artificial intelligence, the designer algorithmically or manually refines the feasible region of the program's inputs and outputs with each iteration to fulfill evolving design requirements. By employing computing power to evaluate more design permutations than a human alone is capable of, the process is capable of producing an optimal design that mimics nature's evolutionary approach to design through genetic variation and selection. The output can be images, sounds, architectural models, animation, and much more. It is, therefore, a fast method of exploring design possibilities that is used in various design fields such as art, architecture, communication design, and product design. Generative design has become more important, largely due to new programming environments or scripting capabilities that have made it relatively easy, even for designers with little programming experience, to implement their ideas. Additionally, this process can create solutions to substantially complex problems that would otherwise be resource-exhaustive with an alternative approach, making it a more attractive option for problems with a large or unknown solution set. It is also facilitated with tools in commercially available CAD packages. Not only are implementation tools more accessible, but also tools leveraging generative design as a foundation. Recent advancements have led to the development of Deep Generative Design, a framework that integrates topology optimization with deep learning models, such as Generative Adversarial Networks (GANs). Unlike traditional evolutionary methods that primarily focus on engineering performance, this approach uses deep generative models to enhance aesthetic diversity and novelty while simultaneously satisfying engineering constraints. For instance, research by Oh et al. (2019) proposed a framework using Boundary Equilibrium GANs (BEGAN) to generate diverse design options which are then refined through density-based topology optimization, allowing for the exploration of complex design spaces that balance structural integrity with visual variation. In practice, generative design does not solely aim to produce a single optimal solution, but involves iteratively refining the design problem by modifying parameters, constraints, and evaluation criteria within a computational model, resulting in multiple design alternatives from which the designer selects. == Use in architecture == Generative design in architecture is an iterative design process that enables architects to explore a wider solution space with more possibility and creativity. Architectural design has long been regarded as a wicked problem. Compared with traditional top-down design approach, generative design can address design problems efficiently, by using a bottom-up paradigm that uses parametric-defined rules to generate complex solutions. The solution itself then evolves to a good, if not optimal, solution. The advantage of using generative design as a design tool is that it does not construct fixed geometries, but take a set of design rules that can generate an infinite set of possible design solutions. The generated design solutions can be more sensitive, responsive, and adaptive to the problem. Generative design involves rule definition and result analysis that are integrated with the design process. By defining parameters and rules, the generative approach is able to provide optimized solution for both structural stability and aesthetics. Possible design algorithms include cellular automata, shape grammar, genetic algorithm, space syntax, and most recently, artificial neural network. Due to the high complexity of the solution generated, rule-based computational tools, such as finite element method and topology optimisation, are preferred to evaluate and optimise the generated solution. The iterative process provided by computer software enables the trial-and-error approach in design, and involves architects interfering with the optimisation process. Historically precedent work includes Antoni Gaudí's Sagrada Família, which used rule based geometrical forms for structures, and Buckminster Fuller's Montreal Biosphere where the rules were designed to generate individual components, rather than the final product. More recent generative-design cases include Foster and Partners' Queen Elizabeth II Great Court, where the tessellated glass roof was designed using a geometric schema to define hierarchical relationships, and then the generated solution was optimized based on geometrical and structural requirements. == Use in sustainable design == Generative design in sustainable design is an effective approach addressing energy efficiency and climate change at the early design stage, recognizing buildings contribute to approximately one-third of global greenhouse gas emissions and 30%-40% of total building energy use. It integrates environmental principles with algorithms, enabling exploration of countless design alternatives to enhance energy performance, reduce carbon footprints, and minimize waste. A key feature of generative design in sustainable design is its ability to incorporate Building Performance Simulations (BPS) into the design process. Simulation programs such as EnergyPlus, Ladybug Tools,, and so on, combined with generative algorithms, can optimize design solutions for cost-effective energy use and zero-carbon building designs. For example, the GENE_ARCH system used a Pareto algorithm with building energy simulation for the whole building design optimization. Generative design has improved sustainable facade design, as illustrated by the algorithm of cellular automata and daylight simulations in adaptive facade design. In addition, genetic algorithms were used with radiation simulations for energy-efficient photo-voltaic (PV) modules on high-rise building facades. Generative design is also applied to life cycle analysis (LCA), as demonstrated by a framework using grid search algorithms to optimize exterior wall design for minimum environmental impact. Multi-objective optimization embraces multiple diverse sustainability goals, such as interactive kinetic louvers using biomimicry and daylight simulations to enhance daylight, visual comfort, and energy efficiency. The study of PV and shading systems can maximize on-site electricity, improve visual quality, and daylight performance. Artificial intelligence (AI) and machine learning (ML) further improve computation efficiency in complex climate-responsive sustainable design. One study employed reinforcement learning to identify the relationship between design parameters and energy use for a sustainable campus, while other studies tried hybrid algorithms, such as using the genetic algorithm and GANs to balance daylight illumination and thermal comfort under different roof conditions. Other popular AI tools were also integrated, including deep reinforcement learning (DRL) and computer vision (CV), to generate an urban block according to direct sunlight hours and solar heat gains. These AI-driven generative design methods enable faster simulations and design decision making, resulting in designs that are environmentally responsible. == Use in additive manufacturing == Additive manufacturing (AM) is a process that creates physical models directly from three-dimensional (3D) data by joining materials layer by layer. It is used in industries to produce a variety of end-use parts, which are final components designed for direct application in products or systems. AM provides design flexibility and enables material reduction in lightweight applications, such as aerospace, automotive, medical, and portable electronic devices, where minimizing weight is critical for performance. Generative design, one of the four key methods for lightweight design in AM, is commonly applied to optimize structures for specific performance requirements. Generative design can help create optimized solutions that balance multiple objectives, such as enhancing performance while minimizing cost. In design for additive manufacturing (DfAM), multi-objective topology optimization is used to generate a set of candidate solutions. Designers then assess these options using their expertise and key performance indicators (KPIs) to select the best option for implementation. However, integrating AM constraints (e.g., speed of build, materials, build envelope, and accuracy) into generative design remains challenging, as ensuring all solutions are valid is complex. Balancing multiple design objectives while limiting computational costs adds further challenges for designers. To overcome these difficulties, researchers proposed a generative design method with manufacturing validation to improve decision-making efficiency. This method starts with a cons

    Read more →