AI Code Checker Python

AI Code Checker Python — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Real-time transcription

  Real-time transcription is the general term for transcription by court reporters using real-time text technologies to deliver computer text screens within a few seconds of the words being spoken. Specialist software allows participants in court hearings or depositions to make notes in the text and highlight portions for future reference. Real-time transcription is also used in the broadcasting environment where it is more commonly termed "captioning." == Career opportunities == Real-time reporting is used in a variety of industries, including entertainment, television, the Internet, and law. Specific careers include the following: Judicial reporters use a stenotype to provide instant transcripts on computer screens as a trial or deposition occurs. Communication access real-time translation (CART) reporters assist the hearing-impaired by transcribing spoken words, giving them personal access to the communications they need day to day. Television broadcast captioners use real-time reporting technology to allow hard-of-hearing or deaf people to see what is being said on live television broadcasts such as news, emergency broadcasts, sporting events, awards shows, and other programs. Internet information (or Webcast) reporters provide real-time reporting of sales meetings, press conferences, and other events, while simultaneously transmitting the transcripts to computers worldwide. Other rapid data entry positions. == History == Before the advent of the stenotype machine, court reporters wrote official trial transcripts by hand using a shorthand system of stenoforms that could later be translated into readable English. It often took eight years of training to learn this manual form of writing at the necessary speed. Walter Heironimus was among the first stenographers to make use of the stenotype machine during his work in the U.S. District Court system in New Jersey in 1935. A "transcript crisis" arose during the later half of the twentieth century due to the increasing volume of lawsuits. There were not enough number of court reporters to match the increasing number of trials. Not only were court reporters unavailable to attend many court proceedings, court transcripts were constantly late and the qualities varied. Some believed it was due to the non-interchangeability between court reporters, and others believed it was simply due to a labor shortage. In the meantime, magnetic audiotape recording, or known as electronic recording (ER) began to threaten all reporters' job since it could record long-hour courtroom trials and replace a court reporter's position in the courtroom. As a result, machine translation (MT) intended to serve as a solution for preventing ER from potentially replacing reporters' jobs. However, MT relied heavily on human labors operating behind the system and many started to question if it should be the right way to end the "transcript crisis." Later in 1964, set up by CIA, the Automatic Language Processing Advisory Committee (ALPAC) was set to review whether MT was capable of solving this crisis. They concluded that MT had failed to do so. Then Patrick O'Neill, a skilled and experienced court reporter, stayed to work on the stenotype-translation project with CIA and developed the prototype CAT system. After adopting the CAT system in court-reporting community, CAT was brought into the television broadcasting system, aiming to provide captions for the deaf or hard-of-hearing communities. In 1983, Linda Miller developed a further use for the CAT system. She successfully translated a lecture live on the television screen and provided a transcript for students. This technique is known as Computer-Aided Real-time Translation, or CART. == Court reporter == It is the court reporter's job to note down the exact words spoken by every participants during a court or deposition proceeding. Then court reporters will provide verbatim transcripts. The reason to have an official court transcript is that the real-time transcriptions allows attorneys and judges to have immediate access to the transcript. It also helps when there's a need to look up for information from the proceeding. Additionally, the deaf and the hard-of-hearing communities can also participate in the judicial process with the help of real-time transcriptions provided by court reporters. === Education and training === The required degree level for a court reporter to have is an Associate's degree or postsecondary certificate. In order to become a court reporter, more than 150 reporter training programs are provided at proprietary schools, community colleges, and four-year universities. After graduation, court reporters can choose to further pursue certifications to achieve a higher level of expertise and increase their marketability during a job search. In most states, Certificates of Proficiency from the NCRA or from state agencies are now required certificates for court reporters to have in order to qualify for appointments. The NCRA aims to set the national standard for the certification of court reporters, and since 1937 it has offered its certification program which is now accepted by 22 states instead of state licenses. Court reporter training programs include but not limited to: Training in rapid writing skill, or shorthand, which will enable students to record, with accuracy, at least 225 words per minute Training in typing, which will enable students to type at least 60 words per minute A general training in English, which covers aspects of grammar, word formation, punctuation, spelling and capitalization Taking Law related courses in order to understand the overall principles of civil and criminal law, legal terminology and common Latin phrases, rules of evidence, court procedures, the duties of court reporters, the ethics of the profession Visits to actual trials Taking courses in elementary anatomy and physiology and medical word study including medical prefixes, roots and suffixes. Other than official court reporters, who are assigned to and work for a particular court, other types of court reporters include free-lance reporter, who either works for a court reporting firm or self-employed. They are different from official court reporters in that they have the chances to work on a wider range of assignments and work on basis of hourly wage. Hearing reporters work at governmental agency hearings. Legislative reporters work in law-making bodies. The demand for reporters is not limited in just the court settings. Reporters are also needed in conferences, meetings, conventions, investigations, and a variety of industries with needs for employers with real-time data entry skills. == Non-English transcription == Transcription services are universally necessary, so it is not limited to the English language. A stenographer's ability to transcribe languages beyond only English is especially valuable as society as a whole becomes increasingly multilingual. Education in non-English transcription demands a comprehensive understanding of the given language. Phonetic differences between English and other languages are a particular challenge in carrying English transcription skills over into other languages. Stenography represents various sounds of a language in a formal system of shorthand, so differences within the sets of sounds that emerge in other languages require an alternative system of shorthand transcription. For example, the presence of many diphthongs and triphthongs in Spanish requires certain sounds to be distinguished that would not be present in transcribing English into shorthand. == Controversies == The usage of transcription in the context of linguistic discussions has been controversial. Typically, two kinds of linguistic records are considered to be scientifically relevant. First, linguistic records of general acoustic features, and secondly, records that only focuses on the distinctive phonemes of a language. While transcriptions are not entirely illegitimate, transcriptions without enough detailed commentary regarding any linguistic features, or transcriptions of poor quality resources, has a great chance of the content being misinterpreted. Besides misinterpretation, transcribers could also bring in cultural biases and ignorance that reflect onto their transcription. These instances may cause a disruption of reliability in the final real-time transcription, which could influence how the written utterance is seen as an evidence for a court-case. === Quality issues === Problems in the final resulting transcription can be caused by either the quality of the transcriber or the original source that is being transcribed. Transcribers can come from different levels of skill and training background. This makes the final transcription prone to poor quality, or if the transcription is being done by multiple people, lack of consistency in the content. If the source of the transcription is a recording, the problem may root back to the quality of the re

  Read more →
• 

  Plaintext

  In cryptography, plaintext usually means unencrypted information pending input into cryptographic algorithms, usually encryption algorithms. This usually refers to data that is transmitted or stored unencrypted. == Overview == With the advent of computing, the term plaintext expanded beyond human-readable documents to mean any data, including binary files, in a form that can be viewed or used without requiring a key or other decryption device. Information—a message, document, file, etc.—if to be communicated or stored in an unencrypted form is referred to as plaintext. Plaintext is used as input to an encryption algorithm; the output is usually termed ciphertext, particularly when the algorithm is a cipher. Codetext is less often used, and almost always only when the algorithm involved is actually a code. Some systems use multiple layers of encryption, with the output of one encryption algorithm becoming "plaintext" input for the next. == Secure handling == Insecure handling of plaintext can introduce weaknesses into a cryptosystem by letting an attacker bypass the cryptography altogether. Plaintext is vulnerable in use and in storage, whether in electronic or paper format. Physical security means the securing of information and its storage media from physical, attack—for instance by someone entering a building to access papers, storage media, or computers. Discarded material, if not disposed of securely, may be a security risk. Even shredded documents and erased magnetic media might be reconstructed with sufficient effort. If plaintext is stored in a computer file, the storage media, the computer and its components, and all backups must be secure. Sensitive data is sometimes processed on computers whose mass storage is removable, in which case physical security of the removed disk is vital. In the case of securing a computer, useful (as opposed to handwaving) security must be physical (e.g., against burglary, brazen removal under cover of supposed repair, installation of covert monitoring devices, etc.), as well as virtual (e.g., operating system modification, illicit network access, Trojan programs). Wide availability of keydrives, which can plug into most modern computers and store large quantities of data, poses another severe security headache. A spy (perhaps posing as a cleaning person) could easily conceal one, and even swallow it if necessary. Discarded computers, disk drives and media are also a potential source of plaintexts. Most operating systems do not actually erase anything— they simply mark the disk space occupied by a deleted file as 'available for use', and remove its entry from the file system directory. The information in a file deleted in this way remains fully present until overwritten at some later time when the operating system reuses the disk space. With even low-end computers commonly sold with many gigabytes of disk space and rising monthly, this 'later time' may be months later, or never. Even overwriting the portion of a disk surface occupied by a deleted file is insufficient in many cases. Peter Gutmann of the University of Auckland wrote a celebrated 1996 paper on the recovery of overwritten information from magnetic disks; areal storage densities have gotten much higher since then, so this sort of recovery is likely to be more difficult than it was when Gutmann wrote. Modern hard drives automatically remap failing sectors, moving data to good sectors. This process makes information on those failing, excluded sectors invisible to the file system and normal applications. Special software, however, can still extract information from them. Some government agencies (e.g., US NSA) require that personnel physically pulverize discarded disk drives and, in some cases, treat them with chemical corrosives. This practice is not widespread outside government, however. Garfinkel and Shelat (2003) analyzed 158 second-hand hard drives they acquired at garage sales and the like, and found that less than 10% had been sufficiently sanitized. The others contained a wide variety of readable personal and confidential information. See data remanence. Physical loss is a serious problem. The US State Department, Department of Defense, and the British Secret Service have all had laptops with secret information, including in plaintext, lost or stolen. Appropriate disk encryption techniques can safeguard data on misappropriated computers or media. On occasion, even when data on host systems is encrypted, media that personnel use to transfer data between systems is plaintext because of poorly designed data policy. For example, in October 2007, HM Revenue and Customs lost CDs that contained the unencrypted records of 25 million child benefit recipients in the United Kingdom. Modern cryptographic systems resist known plaintext or even chosen plaintext attacks, and so may not be entirely compromised when plaintext is lost or stolen. Older systems resisted the effects of plaintext data loss on security with less effective techniques—such as padding and Russian copulation to obscure information in plaintext that could be easily guessed.

  Read more →
• 

  ACTS Gigabit Satellite Network

  The ACTS Gigabit Satellite Network was a pioneering, high-speed communications satellite network in the years 1993-2004, created as a prototype system to explore high-speed networking of digital endpoints. The system was jointly sponsored by NASA and ARPA, implemented by BBN Technologies and Motorola, and was inducted into the Space Technology Hall of Fame in April 1997. The Advanced Communications Technology Satellite (ACTS) network was designed to provide fiber-compatible SONET service to remote nodes and networks through a wideband satellite system, and provided long-haul, point-to-point and point-to-multipoint full-duplex SONET services, at rates up to 622 Mbit/s, over NASA's Advanced Communication Technology Satellite (ACTS). The Advanced Communications Technology Satellite itself, built and operated by Lockheed Martin, was launched on STS-51 on September 12, 1993, by the Space Shuttle Discovery, and occupied a geostationary orbit at 100° west longitude. It was the first communication satellite to operate in the 20–30 GHz frequency band (Ka band), with 30 GHz uplink and 20 GHz downlink signals. The satellite incorporated advanced on-board switching and multiple dynamically-hopping spot-beam antennas for selected areas of the United States including Hawaii. Up to 3 uplink and 3 downlink antenna beams could be active simultaneously. The ACTS network ground terminals were transportable Gigabit Earth Stations (GES) with fiber-optic SONET interfaces (OC-3 and OC-12), which also supported the Asynchronous Transfer Mode (ATM) protocol suite. The network control and management functions are distributed in the various Gigabit Earth Stations, with the operator's interface being centralized in a Network Management Terminal (NMT), which could be collocated at a GES, or anywhere in the Internet. The system was operational and used for experiments for 127 months, instead of the originally planned 24–48 months. In all, 53 terminals were built and used by more than 100 experimenters to test ACTS abilities. In Nov. 1997 a record data rate of 520 Mbit/s TCP/IP throughput was achieved using ATM between several ground stations via ACTS. On May 31, 2000 the ACTS experiments program officially came to a close, but the system continued to support experiments until it was deactivated on April 28, 2004.

  Read more →
• 

  Strategic Air Command Digital Information Network

  The Strategic Air Command DIgital Network (SACDIN) was a United States military computer network that provided computerized record communications, replacing the Data Transmission Subsystem and part of the Data Display Subsystem of the SAC Automated Command and Control System. SACDIN enabled a rapid flow of communications from headquarters SAC to its fielded forces, such as B-52 bases and ICBM Launch Control Centers. == Logistics == Major portions of SACDIN were developed, engineered and installed by the International Telephone and Telegraph (ITT) company, under contract to the Electronic Systems Center. == Chronology == 1969 - Headquarters SAC submits a request to the Joint Chiefs of Staff to study an expanded communications system, known as the SAC Total Information Network (SATIN). It would interconnect Air Force Satellite Communications (AFSATCOM), Advanced Airborne Command Post (AABNCP), Airborne Command Post (ABNCP), high frequency/single sideband radio HF/SSB radio, SAC Automated Command and Control System (SACCS), Automatic Digital Information Network (AUTODIN), Survivable Low Frequency Communications System (SLFCS) and Command Data Buffer (CDB) 1977 1 November - SATIN IV was effectively terminated by Congress. The restructured program was renamed SAC Digital Network (SACDIN), and was formulated to meet SAC's minimum essential data communications requirements, but also had the capability to grow in a modular fashion. 1986 ?? ??? - SACDIN replaces much of the SAC Automated Command and Control System (SACCS) and the SAC Automated Total Information Network (SATIN)

  Read more →
• 

  Color management

  Color management is the process of ensuring consistent and accurate colors across various devices, such as monitors, printers, and cameras. It involves the use of color profiles, which are standardized descriptions of how colors should be displayed or reproduced. Color management is necessary because different devices have different color capabilities and characteristics. For example, a monitor may display colors differently than a printer can reproduce them. Without color management, the same image may appear differently on different devices, leading to inconsistencies and inaccuracies. To achieve color management, a color profile is created for each device involved in the color workflow. This profile describes the device's color capabilities and characteristics, such as its color gamut (range of colors it can display or reproduce) and color temperature. These profiles are then used to translate colors between devices, ensuring consistent and accurate color reproduction. Color management is particularly important in industries such as graphic design, photography, and printing, where accurate color representation is crucial. It helps to maintain color consistency throughout the entire workflow, from capturing an image to displaying or printing it. Parts of color management are implemented in the operating system (OS), helper libraries, the application, and devices. The type of color profile that is typically used is called an ICC profile. A cross-platform view of color management is the use of an ICC-compatible color management system. The International Color Consortium (ICC) is an industry consortium that has defined: an open standard for a Color Matching Module (CMM) at the OS level color profiles for: devices, including DeviceLink profiles that transform one device profile (color space) to another device profile without passing through an intermediate color space, such as LAB, more accurately preserving color working spaces, the color spaces in which color data is meant to be manipulated There are other approaches to color management besides using ICC profiles. This is partly due to history and partly because of other needs than the ICC standard covers. The film and broadcasting industries make use of some of the same concepts, but they frequently rely on more limited boutique solutions. The film industry, for instance, often uses 3D LUTs (lookup table) to represent a complete color transformation for a specific RGB encoding. At the consumer level, system wide color management is available in most of Apple's products (macOS, iOS, iPadOS, watchOS). Microsoft Windows lacks system wide color management and virtually all applications do not employ color management. Windows' media player API is not color space aware, and if applications want to color manage videos manually, they have to incur significant performance and power consumption penalties. Android supports system wide color management, but most devices ship with color management disabled. == Overview == Characterize. Every color-managed device requires a personalized table, or "color profile," which characterizes the color response of that particular device. Standardize. Each color profile describes these colors relative to a standardized set of reference colors (the "Profile Connection Space"). Translate. Color-managed software then uses these standardized profiles to translate color from one device to another. This is usually performed by a color management module (CMM). == Hardware == === Characterization === To describe the behavior of various output devices, they must be compared (measured) in relation to a standard color space. Often a step called linearization is performed first, to undo the effect of gamma correction that was done to get the most out of limited 8-bit color paths. Instruments used for measuring device colors include colorimeters and spectrophotometers. As an intermediate result, the device gamut is described in the form of scattered measurement data. The transformation of the scattered measurement data into a more regular form, usable by the application, is called profiling. Profiling is a complex process involving mathematics, intense computation, judgment, testing, and iteration. After the profiling is finished, an idealized color description of the device is created. This description is called a profile. === Calibration === Calibration is like characterization, except that it can include the adjustment of the device, as opposed to just the measurement of the device. Color management is sometimes sidestepped by calibrating devices to a common standard color space such as sRGB; when such calibration is done well enough, no color translations are needed to get all devices to handle colors consistently. This avoidance of the complexity of color management was one of the goals in the development of sRGB. == Color profiles == === Embedding === Image formats themselves (such as TIFF, JPEG, PNG, EPS, PDF, and SVG) may contain embedded color profiles but are not required to do so by the image format. The International Color Consortium standard was created to bring various developers and manufacturers together. The ICC standard permits the exchange of output device characteristics and color spaces in the form of metadata. This allows the embedding of color profiles into images as well as storing them in a database or a profile directory. === Working spaces === Working spaces, such as sRGB, Adobe RGB or ProPhoto are color spaces that facilitate good results while editing. For instance, pixels with equal values of R,G,B should appear neutral. Using a large (gamut) working space will lead to posterization, while using a small working space will lead to clipping. This trade-off is a consideration for the critical image editor. == Color transformation == Color transformation, or color space conversion, is the transformation of the representation of a color from one color space to another. This calculation is required whenever data is exchanged inside a color-managed chain and carried out by a Color Matching Module. Transforming profiled color information to different output devices is achieved by referencing the profile data into a standard color space. It makes it easier to convert colors from one device to a selected standard color space and from that to the colors of another device. By ensuring that the reference color space covers the many possible colors that humans can see, this concept allows one to exchange colors between many different color output devices. Color transformations can be represented by two profiles (source profile and target profile) or by a devicelink profile. In this process there are approximations involved which make sure that the image keeps its important color qualities and also gives an opportunity to control on how the colors are being changed. === Profile connection space === In the terminology of the International Color Consortium, a translation between two color spaces can go through a profile connection space (PCS): Color Space 1 → PCS (CIELAB or CIEXYZ) → Color space 2; conversions into and out of the PCS are each specified by a profile. === Gamut mapping === In nearly every translation process, we have to deal with the fact that the color gamut of different devices vary in range which makes an accurate reproduction impossible. They therefore need some rearrangement near the borders of the gamut. Some colors must be shifted to the inside of the gamut, as they otherwise cannot be represented on the output device and would simply be clipped. This so-called gamut mismatch occurs for example, when we translate from the RGB color space with a wider gamut into the CMYK color space with a narrower gamut range. In this example, the dark highly saturated purplish-blue color of a typical computer monitor's "blue" primary is impossible to print on paper with a typical CMYK printer. The nearest approximation within the printer's gamut will be much less saturated. Conversely, an inkjet printer's "cyan" primary, a saturated mid-brightness blue, is outside the gamut of a typical computer monitor. The color management system can utilize various methods to achieve desired results and give experienced users control of the gamut mapping behavior. ==== Rendering intent ==== When the gamut of source color space exceeds that of the destination, saturated colors are liable to become clipped (inaccurately represented), or more formally burned. The color management module can deal with this problem in several ways. The ICC specification includes four different rendering intents, listed below. Before the actual rendering intent is carried out, one can temporarily simulate the rendering by soft proofing. It is a useful tool as it predicts the outcome of the colors and is available as an application in many color management systems: Absolute colorimetric Absolute colorimetry and relative colorimetry actually use the same table but differ in the adjust

  Read more →
• 

  ACTS Gigabit Satellite Network

  The ACTS Gigabit Satellite Network was a pioneering, high-speed communications satellite network in the years 1993-2004, created as a prototype system to explore high-speed networking of digital endpoints. The system was jointly sponsored by NASA and ARPA, implemented by BBN Technologies and Motorola, and was inducted into the Space Technology Hall of Fame in April 1997. The Advanced Communications Technology Satellite (ACTS) network was designed to provide fiber-compatible SONET service to remote nodes and networks through a wideband satellite system, and provided long-haul, point-to-point and point-to-multipoint full-duplex SONET services, at rates up to 622 Mbit/s, over NASA's Advanced Communication Technology Satellite (ACTS). The Advanced Communications Technology Satellite itself, built and operated by Lockheed Martin, was launched on STS-51 on September 12, 1993, by the Space Shuttle Discovery, and occupied a geostationary orbit at 100° west longitude. It was the first communication satellite to operate in the 20–30 GHz frequency band (Ka band), with 30 GHz uplink and 20 GHz downlink signals. The satellite incorporated advanced on-board switching and multiple dynamically-hopping spot-beam antennas for selected areas of the United States including Hawaii. Up to 3 uplink and 3 downlink antenna beams could be active simultaneously. The ACTS network ground terminals were transportable Gigabit Earth Stations (GES) with fiber-optic SONET interfaces (OC-3 and OC-12), which also supported the Asynchronous Transfer Mode (ATM) protocol suite. The network control and management functions are distributed in the various Gigabit Earth Stations, with the operator's interface being centralized in a Network Management Terminal (NMT), which could be collocated at a GES, or anywhere in the Internet. The system was operational and used for experiments for 127 months, instead of the originally planned 24–48 months. In all, 53 terminals were built and used by more than 100 experimenters to test ACTS abilities. In Nov. 1997 a record data rate of 520 Mbit/s TCP/IP throughput was achieved using ATM between several ground stations via ACTS. On May 31, 2000 the ACTS experiments program officially came to a close, but the system continued to support experiments until it was deactivated on April 28, 2004.

  Read more →
• 

  Cipher device

  A cipher device was a term used by the US military in the first half of the 20th century to describe a manually operated cipher equipment that converted the plaintext into ciphertext or vice versa. A similar term, cipher machine, was used to describe the cipher equipment that required external power for operation. Cipher box or crypto box is a physical cryptographic device used to encrypt and decrypt messages between plaintext (unencrypted) and ciphertext (encrypted or secret) forms. The ciphertext is suitable for transmission over a channel, such as radio, that might be observed by an adversary the communicating parties wish to conceal the plaintext from.

  Read more →
• 

  Tokenization (data security)

  Tokenization, when applied to data security, is the process of substituting a sensitive data element with a non-sensitive equivalent, referred to as a token, that has no intrinsic or exploitable meaning or value. The token is a reference (i.e. identifier) that maps back to the sensitive data through a tokenization system. The mapping from original data to a token uses methods that render tokens infeasible to reverse in the absence of the tokenization system, for example using tokens created from random numbers. A one-way cryptographic function is used to convert the original data into tokens, making it difficult to recreate the original data without obtaining entry to the tokenization system's resources. To deliver such services, the system maintains a vault database of tokens that are connected to the corresponding sensitive data. Protecting the system vault is vital to the system, and improved processes must be put in place to offer database integrity and physical security. The tokenization system must be secured and validated using security best practices applicable to sensitive data protection, secure storage, audit, authentication and authorization. The tokenization system provides data processing applications with the authority and interfaces to request tokens, or detokenize back to sensitive data. The security and risk reduction benefits of tokenization require that the tokenization system is logically isolated and segmented from data processing systems and applications that previously processed or stored sensitive data replaced by tokens. Only the tokenization system can tokenize data to create tokens, or detokenize back to redeem sensitive data under strict security controls. The token generation method must be proven to have the property that there is no feasible means through direct attack, cryptanalysis, side channel analysis, token mapping table exposure or brute force techniques to reverse tokens back to live data. Replacing live data with tokens in systems is intended to minimize exposure of sensitive data to those applications, stores, people and processes, reducing risk of compromise or accidental exposure and unauthorized access to sensitive data. Applications can operate using tokens instead of live data, with the exception of a small number of trusted applications explicitly permitted to detokenize when strictly necessary for an approved business purpose. Tokenization systems may be operated in-house within a secure isolated segment of the data center, or as a service from a secure service provider. Tokenization may be used to safeguard sensitive data involving, for example, bank accounts, financial statements, medical records, criminal records, driver's licenses, loan applications, stock trades, voter registrations, and other types of personally identifiable information (PII). Tokenization is often used in credit card processing. The PCI Council defines tokenization as "a process by which the primary account number (PAN) is replaced with a surrogate value called a token. A PAN may be linked to a reference number through the tokenization process. In this case, the merchant simply has to retain the token and a reliable third party controls the relationship and holds the PAN. The token may be created independently of the PAN, or the PAN can be used as part of the data input to the tokenization technique. The communication between the merchant and the third-party supplier must be secure to prevent an attacker from intercepting to gain the PAN and the token. De-tokenization is the reverse process of redeeming a token for its associated PAN value. The security of an individual token relies predominantly on the infeasibility of determining the original PAN knowing only the surrogate value". The choice of tokenization as an alternative to other techniques such as encryption will depend on varying regulatory requirements, interpretation, and acceptance by respective auditing or assessment entities. This is in addition to any technical, architectural or operational constraint that tokenization imposes in practical use. == Concepts and origins == The concept of tokenization, as adopted by the industry today, has existed since the first currency systems emerged centuries ago as a means to reduce risk in handling high value financial instruments by replacing them with surrogate equivalents. In the physical world, coin tokens have a long history of use replacing the financial instrument of minted coins and banknotes. In more recent history, subway tokens and casino chips found adoption for their respective systems to replace physical currency and cash handling risks such as theft. Exonumia and scrip are terms synonymous with such tokens. In the digital world, similar substitution techniques have been used since the 1970s as a means to isolate real data elements from exposure to other data systems. In databases for example, surrogate key values have been used since 1976 to isolate data associated with the internal mechanisms of databases and their external equivalents for a variety of uses in data processing. More recently, these concepts have been extended to consider this isolation tactic to provide a security mechanism for the purposes of data protection. In the payment card industry, tokenization is one means of protecting sensitive cardholder data in order to comply with industry standards and government regulations. Tokenization was applied to payment card data by Shift4 Corporation and released to the public during an industry Security Summit in Las Vegas, Nevada in 2005. The technology is meant to prevent the theft of the credit card information in storage. Shift4 defines tokenization as: "The concept of using a non-decryptable piece of data to represent, by reference, sensitive or secret data. In payment card industry (PCI) context, tokens are used to reference cardholder data that is managed in a tokenization system, application or off-site secure facility." To protect data over its full lifecycle, tokenization is often combined with end-to-end encryption to secure data in transit to the tokenization system or service, with a token replacing the original data on return. For example, to avoid the risks of malware stealing data from low-trust systems such as point of sale (POS) systems, as in the Target breach of 2013, cardholder data encryption must take place prior to card data entering the POS and not after. Encryption takes place within the confines of a security hardened and validated card reading device and data remains encrypted until received by the processing host, an approach pioneered by Heartland Payment Systems as a means to secure payment data from advanced threats, now widely adopted by industry payment processing companies and technology companies. The PCI Council has also specified end-to-end encryption (certified point-to-point encryption—P2PE) for various service implementations in various PCI Council Point-to-point Encryption documents. == The tokenization process == The process of tokenization consists of the following steps: The application sends the tokenization data and authentication information to the tokenization system. It is stopped if authentication fails and the data is delivered to an event management system. As a result, administrators can discover problems and effectively manage the system. The system moves on to the next phase if authentication is successful. Using one-way cryptographic or random generation techniques, a token is generated and kept in a highly secure data vault. The new token is provided to the application for further use, replacing the sensitive data for processing and storage. Tokenization systems share several components according to established standards. Token generation is the process of producing a token using any means, such as one-way nonreversible cryptographic functions (e.g., a hash function with a strong, secret salt) or assignment via a randomly generated number. Random number generator (RNG) techniques are often the best choice for generating token values. Token mapping – this is the process of assigning the created token value to its original value. To enable permitted look-ups of the original value using the token as the index, a secure cross-reference database must be constructed. Token data store – this is a central repository for the token mapping process that holds the original sensitive values and their related token values. Sensitive data and token values must be securely kept in an encrypted format. Management of cryptographic keys. Strong key management procedures are required for sensitive data encryption on token data stores. == Difference from encryption == Tokenization and "classic" encryption effectively protect data if implemented properly, and a computer security system may use both. While similar in certain regards, tokenization and classic encryption differ in a few key aspects. Both are cryptographic data security methods and the

  Read more →
• 

  Symbol level

  In knowledge-based systems, agents choose actions based on the principle of rationality to move closer to a desired goal. The agent is able to make decisions based on knowledge it has about the world (see knowledge level). But for the agent to actually change its state, it must use whatever means it has available. This level of description for the agent's behavior is the symbol level. The term was coined by Allen Newell in 1982. For example, in a computer program, the knowledge level consists of the information contained in its data structures that it uses to perform certain actions. The symbol level consists of the program's algorithms, the data structures themselves, and so on.

  Read more →
• 

  CrySyS Lab

  CrySyS Lab (Hungarian pronunciation: [ˈkriːsis]) is part of the Department of Telecommunications at the Budapest University of Technology and Economics. The name is derived from "Laboratory of Cryptography and System Security", the full Hungarian name is CrySys Adat- és Rendszerbiztonság Laboratórium. == History == CrySyS Lab. was founded in 2003 by a group of security researchers at the Budapest University of Technology and Economics. Currently, it is located in the Infopark Budapest. The heads of the lab were Dr. István Vajda (2003–2010) and Dr. Levente Buttyán (2010-now). Since its establishment, the lab participated in several research and industry projects, including successful EU FP6 and FP7 projects (SeVeCom, a UbiSecSens and WSAN4CIP). == Research results == CrySyS Lab is recognized in research for its contribution to the area of security in wireless embedded systems. In this area, the members of the lab produced 5 books 4 book chapters 21 journal papers 47 conference papers 3 patents 2 Internet Draft The above publications had an impact factor of 30+ and obtained more than 7500 references. Several of these publications appeared in highly cited journals (e.g., IEEE Transactions on Dependable and Secure Systems, IEEE Transactions on Mobile Computing). == Forensics analysis of malware incidents == The laboratory was involved in the forensic analysis of several high-profile targeted attacks. In October 2011, CrySyS Lab discovered the Duqu malware; pursued the analysis of the Duqu malware and as a result of the investigation, identified a dropper file with an MS 0-day kernel exploit inside; and finally released a new open-source Duqu Detector Toolkit to detect Duqu traces and running Duqu instances. In May 2012, the malware analysis team at CrySyS Lab participated in an international collaboration aiming at the analysis of an as yet unknown malware, which they call sKyWIper. At the same time Kaspersky Lab analyzed the malware Flame and Iran National CERT (MAHER) the malware Flamer. Later, they turned out to be the same. Other analysis published by CrySyS Lab include the password analysis of the Hungarian ISP, Elender, and a thorough Hungarian security survey of servers after the publications of the Kaminsky DNS attack.

  Read more →
• 

  CryptoParty

  CryptoParty (Crypto-Party) is a grassroots global endeavour to introduce the basics of practical cryptography such as the Tor anonymity network, I2P, Freenet, key signing parties, disk encryption and virtual private networks to the general public. The project primarily consists of a series of free public workshops. == History == As a successor to the Cypherpunks of the 1990s, CryptoParty was conceived in late August 2012 by the Australian journalist Asher Wolf in a Twitter post following the passing of the Cybercrime Legislation Amendment Bill 2011 and the proposal of a two-year data retention law in that country, the Cybercrime Legislation Amendment Bill 2011. The DIY, self-organizing movement immediately went viral, with a dozen autonomous CryptoParties being organized within hours in cities throughout Australia, the US, the UK, and Germany. Many more parties were soon organized or held in Chile, The Netherlands, Hawaii, Asia, etc. Tor usage in Australia itself spiked, and CryptoParty London with 130 attendees—some of whom were veterans of the Occupy London movement—had to be moved from London Hackspace to the Google campus in east London's Tech City. As of mid-October 2012 some 30 CryptoParties have been held globally, some on a continuing basis, and CryptoParties were held on the same day in Reykjavik, Brussels, and Manila. The first draft of the 442-page CryptoParty Handbook (the hard copy of which is available at cost) was pulled together in three days using the book sprint approach, and was released 2012-10-04 under a CC BY-SA license. === Edward Snowden involvement === In May 2014, Wired reported that Edward Snowden, while employed by Dell as an NSA contractor, organized a local CryptoParty at a small hackerspace in Honolulu, Hawaii on December 11, six months before becoming well known for leaking tens of thousands of secret U.S. government documents. During the CryptoParty, Snowden taught 20 Hawaii residents how to encrypt their hard drives and use the Internet anonymously. The event was filmed by Snowden's then-girlfriend, but the video has never been released online. In a follow-up post to the CryptoParty wiki, Snowden pronounced the event a "huge success." == Media response == In 2013, CryptoParty received messages of support from the Electronic Frontier Foundation and (purportedly) AnonyOps, as well as the NSA whistleblower Thomas Drake, WikiLeaks central editor Heather Marsh, and Wired reporter Quinn Norton. Eric Hughes, the author of A Cypherpunk's Manifesto nearly two decades before, delivered the keynote address, Putting the Personal Back in Personal Computers, at the Amsterdam CryptoParty on 2012-09-27. Marcin de Kaminski, founding member of Piratbyrån which in turn founded The Pirate Bay, regarded CryptoParty as the most important civic project in cryptography in 2012, and Cory Doctorow has characterized a CryptoParty as being "like a Tupperware party for learning crypto." Der Spiegel in December 2014 mentioned "crypto parties" in the wake of the Edward Snowden leaks in an article about the NSA.

  Read more →
• 

  Social television

  Social television is the union of television and social media. Millions of people now share their TV experience with other viewers on social media such as Twitter and Facebook using smartphones and tablets. TV networks and rights holders are increasingly sharing video clips on social platforms to monetise engagement and drive tune-in. The social TV market covers the technologies that support communication and social interaction around TV as well as companies that study television-related social behavior and measure social media activities tied to specific TV broadcasts – many of which have attracted significant investment from established media and technology companies. The market is also seeing numerous tie-ups between broadcasters and social networking players such as Twitter and Facebook. The market is expected to be worth $256bn by 2017. Social TV was named one of the 10 most important emerging technologies by the MIT Technology Review on Social TV in 2010. And in 2011, David Rowan, the editor of Wired magazine, named Social TV at number three of six in his peek into 2011 and what tech trends to expect to get traction. Ynon Kreiz, CEO of the Endemol Group told the audience at the Digital Life Design (DLD) conference in January 2011: "Everyone says that social television will be big. I think it's not going to be big—it's going to be huge". Much of the investment in the earlier years of social TV went into standalone social TV apps. The industry believed these apps would provide an appealing and complimentary consumer experience which could then be monetized with ads. These apps featured TV listings, check-ins, stickers and synchronised second-screen content but struggled to attract users away from Twitter and Facebook. Most of these companies have since gone out of business or been acquired amid a wave of consolidation and the market has instead focused on the activities of the social media channels themselves – such as Twitter Amplify, Facebook Suggested Videos and Snapchat Discover – and the technologies that support them. == Twitter == Twitter and Facebook are both helping users connect around media, which can provoke strong debate and engagement. Both social platforms want to be the 'digital watercooler' and host conversation around TV because the engagement and data about what media people consume can then be used to generate advertising revenue. As an open platform, conversation on Twitter is closely aligned with real-time events. In May 2013, it launched Twitter Amplify – an advertising product for media and consumer brands. With Amplify, Twitter runs video highlights from major live broadcasts, with advertisers' names and messages playing before the clip. By February 2014, all four major U.S. TV networks had signed up to the Amplify program, bringing a variety of premium TV content onto the social platform in the form of in-tweet real-time video clips. In June 2014, Twitter acquired its Twitter Amplify partner in the U.S. SnappyTV, a company that was helping broadcasters and rights holders to share video content both organically across social and via Twitter's Amplify program. Twitter continues to rely on Grabyo, which has also struck numerous deals with some of the largest broadcasters and rights holders in Europe and North America to share video content across Facebook and Twitter. == Facebook == Facebook made significant changes to its platform in 2014 including updates to its algorithm to enhance how it serves video in users' feeds. It also launched video autoplay to get users to watch the videos in their feeds. It rapidly surpassed Twitter and by the end of 2014 it was enjoying three billion video views a day on its platform and had announced a partnership with the NFL, one of Twitter's most active Twitter Amplify partners. In April 2015, at its F8 Developer Conference, it revealed it was working with Grabyo among other technology partners to bring video onto its platform. Then in July it announced it would be launching Facebook Suggested Videos, bringing related videos and ads to anyone that clicks on a video – a move that not only competed with Twitter's commercial video offering but also put it in direct competition with YouTube. == TV Time == TV Time is a television dedicated social network that allows users to keep track of the television series they watch, as well as films. It also allows them to express their reaction to the media they have seen with episode specific voting for favorite characters and emotional reaction to episodes, as well as commenting in episode restrictive pages. This way users are able to avoid spoilers while also finding a precise audience and community for each of their interactions, as opposed to bigger, non-television dedicated social medias such as Facebook and Twitter where the likelihood of unintentionally reading spoilers is much higher. TV Time offers an analytics service called "TVLytics" where the votes and reactions collected from users can be studied for research and television production purposes. == Advertising == According to Businessinsider.com, there are variety of applications for social TV, including support for TV ad sales, optimizing TV ad buys, making ad buys more efficient, as a complement to audience measurement, and eventually, audience forecasting and real-time optimization. Social TV data can ease access to focus groups and may create a positive feedback loop for generating ultra-sticky TV programming and multi-screen ad campaigns. == In numbers == Viewers share their TV experience on social media in real-time as events unfold: between 88-100m Facebook users login to the platform during the primetime hours of 8pm – 11pm in the US. The volume of social media engagement in TV is also rising – according to Nielsen SocialGuide, there was a 38% increase in tweets about TV in 2013 to 263m. For the 2014 Super Bowl, Twitter reported that a record 24.9 million tweets about the game were sent during the telecast, peaking at 381,605 tweets per minute. Facebook reported that 50 million people discussed the Super Bowl, generating 185 million interactions. The 2014 Oscars generated 5m tweets, viewed by an audience of 37m unique Twitter users and delivering 3.3bn impressions globally as conversation and key moments were shared virally across the platform. In 2014 the All England Lawn Tennis Club (AELTC), hosts of Wimbledon, used Grabyo to share video content across social. The videos were viewed 3.5 million times across Facebook and Twitter. In partnered with Grabyo again in 2015 and the videos generated over 48 million views across Facebook and Twitter. == Television shows with social integration == Here are some examples of how TV executives are integrating social elements with TV shows: C-SPAN streamed tweets from US Senators and Representatives during the quorum call The Voice had the judges of the program tweet during the show and the posts scrolls on the bottom of the screen. The use of Twitter also led to an increase in viewers. "Glee" Entertainment Weekly created a second screen viewing platform for the Glee season 3 premiere. == Related publications == Erika Jonietz. "Making TV Social, Virtually" MIT Technology Review. (January 11, 2010) AmigoTV (Alcatel-Lucent; Coppens et al.) – 2004 www.ist-ipmedianet.org/Alcatel_EuroiTV2004_AmigoTV_short_paper_S4-2.pdf Nextream (MIT Media Lab, Martin et al.) – 2010 Social Interactive Television: Immersive Shared Experiences and Perspectives (P. Cesar, D. Geerts, and K. Chorianopoulos (eds.)) – 2009 Social TV and the Emergence of Interactive TV – Multimedia Research Group – November 2010 Interactive Social TV on Service Oriented Environments: Challenges and Enablers (May 2011) == Systems == Boxee – acquired by Samsung GetGlue – acquired by i.TV Grabyo KIT digital Miso TV Tank Top TV WiO Xbox Live

  Read more →
• 

  Line Drawing System-1

  LDS-1 (Line Drawing System-1) was a calligraphic (vector, rather than raster) display processor and display device created by Evans & Sutherland in 1969. This model was known as the first graphics device with a graphics processing unit. == Features == It was controlled by a variety of host computers. Straight lines were smoothly rendered in real-time animation. General principles of operation were similar to the systems used today: 4x4 transformation matrices, 1x4 vertices. Possible uses included flight simulation (in the product brochure there are screenshots of landing on a carrier), scientific imaging and GIS systems. == History == The first LDS-1 was shipped to the customer (BBN) in August 1969. Only a few of these systems were ever built. One was used by the Los Angeles Times as their first typesetting/layout computer. One went to NASA Ames Research Center for Human Factors Research. Another was bought by the Port Authority of New York to develop a tugboat pilot trainer for navigation in the harbor. The MIT Dynamic Modeling had one, and there was a program for viewing an ongoing game of Maze War.

  Read more →
• 

  Batch cryptography

  Batch cryptography is a field of cryptology focused on the design of cryptographic protocols that perform operations—such as encryption, decryption, key exchange, and authentication—on multiple inputs simultaneously, rather than processing each input individually. Batching cryptographic operations can significantly reduce the marginal cost of handling individual inputs—a principle that was first introduced by Amos Fiat in 1989.

  Read more →
• 

  Client-side encryption

  Client-side encryption is the cryptographic technique of encrypting data on the sender's side, before it is transmitted to a server such as a cloud storage service. Client-side encryption features an encryption key that is not available to the service provider, making it difficult or impossible for service providers to decrypt hosted data. Client-side encryption allows for the creation of applications whose providers cannot access the data its users have stored, thus offering a high level of privacy. Applications utilizing client-side encryption are sometimes marketed under the misleading or incorrect term "zero-knowledge", but this is a misnomer, as the term zero-knowledge describes something entirely different in the context of cryptography. == Details == Client-side encryption seeks to eliminate the potential for data to be viewed by service providers (or third parties that compel service providers to deliver access to data), client-side encryption ensures that data and files that are stored in the cloud can only be viewed on the client-side of the exchange. This prevents data loss and the unauthorized disclosure of private or personal files, providing increased peace of mind for its users. Current recommendations by industry professionals as well as academic scholars offer great vocal support for developers to include client-side encryption to protect the confidentiality and integrity of information. === Examples of services that use client-side encryption by default === Tresorit MEGA Cryptee Cryptomator === Examples of services that optionally support client-side encryption === Apple iCloud offers optional client-side encryption when "Advanced Data Protection for iCloud" is enabled. Google Drive, Google Docs, Google Meet, Google Calendar, and Gmail — However, as of Jul 2024, optional client-side encryption features are only available to paid users. === Examples of services that do not support client-side encryption === Dropbox === Examples of client-side encrypted services that no longer exist === SpiderOak Backup

  Read more →