AI Code Fixer

AI Code Fixer — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Luma (video)

In video, luma ( Y ′ {\displaystyle Y'} ) represents the brightness in an image (the "black-and-white" or achromatic portion of the image). Luma is typically paired with chroma. Luma represents the achromatic image, while the chroma components represent the color information. Converting R′G′B′ sources (such as the output of a three-CCD camera) into luma and chroma allows for chroma subsampling: because human vision has finer spatial sensitivity to luminance ("black and white") differences than chromatic differences, video systems can store and transmit chromatic information at lower resolution, optimizing perceived detail at a particular bandwidth. == Luma versus relative luminance == Luma is the weighted sum of gamma-compressed R′G′B′ components of a color video—the prime symbols ′ denote gamma compression. The word was proposed to prevent confusion between luma as implemented in video engineering and relative luminance as used in color science (i.e. as defined by CIE). Relative luminance is formed as a weighted sum of linear RGB components, not gamma-compressed ones. Even so, luma is sometimes erroneously called luminance. SMPTE EG 28 recommends the symbol Y ′ {\displaystyle Y'} to denote luma and the symbol Y {\displaystyle Y} to denote relative luminance. === Use of relative luminance === While luma is more often encountered, relative luminance is sometimes used in video engineering when referring to the brightness of a monitor. The formula used to calculate relative luminance uses coefficients based on the CIE color matching functions and the relevant standard chromaticities of red, green, and blue (e.g., the original NTSC primaries, SMPTE C, or Rec. 709). For the Rec. 709 (and sRGB) primaries, the linear combination, based on pure colorimetric considerations and the definition of relative luminance is: Y = 0.2126 R + 0.7152 G + 0.0722 B {\displaystyle Y=0.2126R+0.7152G+0.0722B} The formula used to calculate luma in the Rec. 709 spec arbitrarily also uses these same coefficients, but with gamma-compressed components: Y ′ = 0.2126 R ′ + 0.7152 G ′ + 0.0722 B ′ , {\displaystyle Y'=0.2126R'+0.7152G'+0.0722B',} where the prime symbol ′ denotes gamma compression. == Rec. 601 luma versus Rec. 709 luma coefficients == For digital formats following CCIR 601 (i.e. most digital standard definition formats), luma is calculated with this formula: Y 601 ′ = 0.299 R ′ + 0.587 G ′ + 0.114 B ′ {\displaystyle Y'_{\text{601}}=0.299R'+0.587G'+0.114B'} Formats following ITU-R Recommendation BT. 709 (i.e. most digital high definition formats) use a different formula: Y 709 ′ = 0.2126 R ′ + 0.7152 G ′ + 0.0722 B ′ {\displaystyle Y'_{\text{709}}=0.2126R'+0.7152G'+0.0722B'} Modern HDTV systems use the 709 coefficients, while transitional 1035i HDTV (MUSE) formats may use the SMPTE 240M coefficients: Y 240 ′ = 0.212 R ′ + 0.701 G ′ + 0.087 B ′ = Y 145 ′ {\displaystyle Y'_{\text{240}}=0.212R'+0.701G'+0.087B'=Y'_{\text{145}}} These coefficients correspond to the SMPTE RP 145 primaries (also known as "SMPTE C") in use at the time the standard was created. The change in the luma coefficients is to provide the "theoretically correct" coefficients that reflect the corresponding standard chromaticities ('colors') of the primaries red, green, and blue. However, there is some controversy regarding this decision. The difference in luma coefficients requires that component signals must be converted between Rec. 601 and Rec. 709 to provide accurate colors. In consumer equipment, the matrix required to perform this conversion may be omitted (to reduce cost), resulting in inaccurate color. == Luma and luminance errors == As well, the Rec. 709 luma coefficients may not necessarily provide better performance. Because of the difference between luma and relative luminance, luma does not exactly represent the luminance in an image. As a result, errors in chroma can affect luminance. Luma alone does not perfectly represent luminance; accurate luminance requires both accurate luma and chroma. Hence, errors in chroma "bleed" into the luminance of an image. Note the bleeding in lightness near the borders. Due to the widespread usage of chroma subsampling, errors in chroma typically occur when it is lowered in resolution/bandwidth. This lowered bandwidth, coupled with high frequency chroma components, can cause visible errors in luminance. An example of a high frequency chroma component would be the line between the green and magenta bars of the SMPTE color bars test pattern. Error in luminance can be seen as a dark band that occurs in this area.
Read more →
Halloween Problem

In computing, the Halloween Problem refers to a phenomenon in databases in which an update operation causes a change in the physical location of a row, potentially allowing the row to be visited again later in the same update operation. This could even cause an infinite loop in some cases where updates continually place the updated record ahead of the scan performing the update operation. The potential for this database error was first discovered by Don Chamberlin, Pat Selinger, and Morton Astrahan in the mid-1970s, on Halloween day, while working on query optimization. They wrote a SQL query supposed to give a ten percent raise to every employee who earned less than $25,000. This query would run successfully, with no errors, but when finished all the employees in the database earned at least $25,000, because it kept giving them a raise until they reached that level. The expectation was that the query would iterate over each of the employee records with a salary less than $25,000 precisely once. In fact, because even updated records were visible to the query execution engine and so continued to match the query's criteria, salary records were matching multiple times and each time being given a 10% raise until they were all greater than $25,000. Contrary to what some believe, the name is not descriptive of the nature of the problem but rather was given due to the day it was discovered on. As recounted by Don Chamberlin: Pat and Morton discovered this problem on Halloween... I remember they came into my office and said, "Chamberlin, look at this. We have to make sure that when the optimizer is making a plan for processing an update, it doesn't use an index that is based on the field that is being updated. How are we going to do that?" It happened to be on a Friday, and we said, "Listen, we are not going to be able to solve this problem this afternoon. Let's just give it a name. We'll call it the Halloween Problem and we'll work on it next week." And it turns out it has been called that ever since.
Read more →
Variable data publishing

Variable-data publishing (VDP) (also known as database publishing) is a term referring to the output of a variable composition system. While these systems can produce both electronically viewable and hard-copy (print) output, the "variable-data publishing" term today often distinguishes output destined for electronic viewing, rather than that which is destined for hard-copy print (e.g. variable data printing). Essentially the same techniques are employed to perform variable-data publishing, as those utilized with variable data printing. The difference is in the interpretation for output. While variable-data printing may be interpreted to produce various print streams or page-description files (e.g. AFP/IPDS, PostScript, PCL), variable-data publishing produces electronically viewable files, most commonly seen in the forms of PDF, HTML, or XML. Variable-data composition involves the use of data to conditionally: exhibit text (static blocks and/or variable content) exhibit images select fonts select colors format page layouts & flows Variable-data may be as simple as an address block or salutation. However, it can be any or all of the document's textual content—including words, sentences, paragraphs, pages, or the entire document. In other words, it can make up as little or as much of the document as the composer desires. Variable data may also be used to exhibit various images, such as logos, products, or membership photos. Further, variable-data can be used to build rule-based design schemes, including fonts, colors, and page formats. The possibilities are vast. The variable-data tools available today, make it possible to perform variable-data composition at nearly every stage of document production. However, the level of control that can be achieved varies, based upon how far into the document production process a variable-data tool is deployed. For example, if variable-data insertion occurs just prior to output...it's not likely that the text flow or layout can be altered with nearly as much control as would be available at the time of initial document composition. Many organizations will produce multiple forms of output (aka: multi-channel output), for the same document. This ensures that the published content is available to recipients via any form of access method they might require. When multi-channel output is utilized, integrity between those output channels often becomes important. Variable-data publishing may be performed on everything from a personal computer to a mainframe system. However, the speed and practical output volumes which can be achieved are directly affected by the computer power utilized. == Origin of the concept == The term variable-data publishing was likely an offshoot of the term "variable-data printing", first introduced to the printing industry by Frank Romano, Professor Emeritus, School of Print Media, at the College of Imaging Arts and Sciences at Rochester Institute of Technology. However, the concept of merging static document elements and variable document elements predates the term and has seen various implementations ranging from simple desktop 'mail merge', to complex mainframe applications in the financial and banking industry. In the past, the term VDP has been most closely associated with digital printing machines. However, in the past 3 years the application of this technology has spread to web pages, emails, and mobile messaging.
Read more →
Variable data publishing

Variable-data publishing (VDP) (also known as database publishing) is a term referring to the output of a variable composition system. While these systems can produce both electronically viewable and hard-copy (print) output, the "variable-data publishing" term today often distinguishes output destined for electronic viewing, rather than that which is destined for hard-copy print (e.g. variable data printing). Essentially the same techniques are employed to perform variable-data publishing, as those utilized with variable data printing. The difference is in the interpretation for output. While variable-data printing may be interpreted to produce various print streams or page-description files (e.g. AFP/IPDS, PostScript, PCL), variable-data publishing produces electronically viewable files, most commonly seen in the forms of PDF, HTML, or XML. Variable-data composition involves the use of data to conditionally: exhibit text (static blocks and/or variable content) exhibit images select fonts select colors format page layouts & flows Variable-data may be as simple as an address block or salutation. However, it can be any or all of the document's textual content—including words, sentences, paragraphs, pages, or the entire document. In other words, it can make up as little or as much of the document as the composer desires. Variable data may also be used to exhibit various images, such as logos, products, or membership photos. Further, variable-data can be used to build rule-based design schemes, including fonts, colors, and page formats. The possibilities are vast. The variable-data tools available today, make it possible to perform variable-data composition at nearly every stage of document production. However, the level of control that can be achieved varies, based upon how far into the document production process a variable-data tool is deployed. For example, if variable-data insertion occurs just prior to output...it's not likely that the text flow or layout can be altered with nearly as much control as would be available at the time of initial document composition. Many organizations will produce multiple forms of output (aka: multi-channel output), for the same document. This ensures that the published content is available to recipients via any form of access method they might require. When multi-channel output is utilized, integrity between those output channels often becomes important. Variable-data publishing may be performed on everything from a personal computer to a mainframe system. However, the speed and practical output volumes which can be achieved are directly affected by the computer power utilized. == Origin of the concept == The term variable-data publishing was likely an offshoot of the term "variable-data printing", first introduced to the printing industry by Frank Romano, Professor Emeritus, School of Print Media, at the College of Imaging Arts and Sciences at Rochester Institute of Technology. However, the concept of merging static document elements and variable document elements predates the term and has seen various implementations ranging from simple desktop 'mail merge', to complex mainframe applications in the financial and banking industry. In the past, the term VDP has been most closely associated with digital printing machines. However, in the past 3 years the application of this technology has spread to web pages, emails, and mobile messaging.
Read more →
Connected-component labeling

Connected-component labeling (CCL), connected-component analysis (CCA), blob extraction, region labeling, blob discovery, or region extraction is an algorithmic application of graph theory, where subsets of connected components are uniquely labeled based on a given heuristic. Connected-component labeling is not to be confused with segmentation. Connected-component labeling is used in computer vision to detect connected regions in binary digital images, although color images and data with higher dimensionality can also be processed. When integrated into an image recognition system or human-computer interaction interface, connected component labeling can operate on a variety of information. Blob extraction is generally performed on the resulting binary image from a thresholding step, but it can be applicable to gray-scale and color images as well. Blobs may be counted, filtered, and tracked. Blob extraction is related to but distinct from blob detection. == Overview == A graph, containing vertices and connecting edges, is constructed from relevant input data. The vertices contain information required by the comparison heuristic, while the edges indicate connected 'neighbors'. An algorithm traverses the graph, labeling the vertices based on the connectivity and relative values of their neighbors. Connectivity is determined by the medium; image graphs, for example, can be 4-connected neighborhood or 8-connected neighborhood. Following the labeling stage, the graph may be partitioned into subsets, after which the original information can be recovered and processed . == Definition == The usage of the term connected-component labeling (CCL) and its definition is quite consistent in the academic literature, whereas connected-component analysis (CCA) varies both in terminology and in its definition of the problem. Rosenfeld et al. define connected components labeling as the “[c]reation of a labeled image in which the positions associated with the same connected component of the binary input image have a unique label.” Shapiro et al. define CCL as an operator whose “input is a binary image and [...] output is a symbolic image in which the label assigned to each pixel is an integer uniquely identifying the connected component to which that pixel belongs.” There is no consensus on the definition of CCA in the academic literature. It is often used interchangeably with CCL. A more extensive definition is given by Shapiro et al.: “Connected component analysis consists of connected component labeling of the black pixels followed by property measurement of the component regions and decision making.” The definition for connected-component analysis presented here is more general, taking the thoughts expressed in into account. == Algorithms == The algorithms discussed can be generalised to arbitrary dimensions, albeit with increased time and space complexity. === One component at a time === This is a fast and very simple method to implement and understand. It is based on graph traversal methods in graph theory. In short, once the first pixel of a connected component is found, all the connected pixels of that connected component are labelled before going onto the next pixel in the image. This algorithm is part of Vincent and Soille's watershed segmentation algorithm, other implementations also exist. In order to do that a linked list is formed that will keep the indexes of the pixels that are connected to each other, steps (2) and (3) below. The method of defining the linked list specifies the use of a depth or a breadth first search. For this particular application, there is no difference which strategy to use. The simplest kind of a last in first out queue implemented as a singly linked list will result in a depth first search strategy. It is assumed that the input image is a binary image, with pixels being either background or foreground and that the connected components in the foreground pixels are desired. The algorithm steps can be written as: Start from the first pixel in the image. Set current label to 1. Go to (2). If this pixel is a foreground pixel and it is not already labelled, give it the current label and add it as the first element in a queue, then go to (3). If it is a background pixel or it was already labelled, then repeat (2) for the next pixel in the image. Pop out an element from the queue, and look at its neighbours (based on any type of connectivity). If a neighbour is a foreground pixel and is not already labelled, give it the current label and add it to the queue. Repeat (3) until there are no more elements in the queue. Go to (2) for the next pixel in the image and increment current label by 1. Note that the pixels are labelled before being put into the queue. The queue will only keep a pixel to check its neighbours and add them to the queue if necessary. This algorithm only needs to check the neighbours of each foreground pixel once and doesn't check the neighbours of background pixels. The pseudocode is: algorithm OneComponentAtATime(data) input : imageData[xDim][yDim] initialization : label = 0, labelArray[xDim][yDim] = 0, statusArray[xDim][yDim] = false, queue1, queue2; for i = 0 to xDim do for j = 0 to yDim do if imageData[i][j] has not been processed do if imageData[i][j] is a foreground pixel do check its four neighbors(north, south, east, west) : if neighbor is not processed do if neighbor is a foreground pixel do add it to queue1 else update its status to processed end if labelArray[i][j] = label (give label) statusArray[i][j] = true (update status) while queue1 is not empty do For each pixel in the queue do : check its four neighbors if neighbor is not processed do if neighbor is a foreground pixel do add it to queue2 else update its status to processed end if give it the current label update its status to processed remove the current element from queue1 copy queue2 into queue1 end While increase the label end if else update its status to processed end if end if end if end for end for === Two-pass === Relatively simple to implement and understand, the two-pass algorithm, (also known as the Hoshen–Kopelman algorithm) iterates through 2-dimensional binary data. The algorithm makes two passes over the image: the first pass to assign temporary labels and record equivalences, and the second pass to replace each temporary label by the smallest label of its equivalence class. The input data can be modified in situ (which carries the risk of data corruption), or labeling information can be maintained in an additional data structure. Connectivity checks are carried out by checking neighbor pixels' labels (neighbor elements whose labels are not assigned yet are ignored), or say, the north-east, the north, the north-west and the west of the current pixel (assuming 8-connectivity). 4-connectivity uses only north and west neighbors of the current pixel. The following conditions are checked to determine the value of the label to be assigned to the current pixel (4-connectivity is assumed) Conditions to check: Does the pixel to the left (west) have the same value as the current pixel? Yes – We are in the same region. Assign the same label to the current pixel No – Check next condition Do both pixels to the north and west of the current pixel have the same value as the current pixel but not the same label? Yes – We know that the north and west pixels belong to the same region and must be merged. Assign the current pixel the minimum of the north and west labels, and record their equivalence relationship No – Check next condition Does the pixel to the left (west) have a different value and the one to the north the same value as the current pixel? Yes – Assign the label of the north pixel to the current pixel No – Check next condition Do the pixel's north and west neighbors have different pixel values than current pixel? Yes – Create a new label id and assign it to the current pixel The algorithm continues this way, and creates new region labels whenever necessary. The key to a fast algorithm, however, is how this merging is done. This algorithm uses the union-find data structure which provides excellent performance for keeping track of equivalence relationships. Union-find essentially stores labels which correspond to the same blob in a disjoint-set data structure, making it easy to remember the equivalence of two labels by the use of an interface method E.g.: findSet(l). findSet(l) returns the minimum label value that is equivalent to the function argument 'l'. Once the initial labeling and equivalence recording is completed, the second pass merely replaces each pixel label with its equivalent disjoint-set representative element. A faster-scanning algorithm for connected-region extraction is presented below. On the first pass: Iterate through each element of the data by column, then by row (Raster Scanning) If the element is not the background Get the neighboring elements of the current element If there are no neighbors, uniquely
Read more →
Trigger list

Trigger list in its most general meaning refers to a list whose items are used to initiate ("trigger") certain actions. == United States: Private financial information == In the United States, when a person applies for a mortgage loan, the lender makes a credit inquiry about the potential borrower from the national credit bureaus, Equifax, Experian and TransUnion. Unless the borrower is opted out, the credit bureaus put the applicants onto a "trigger list" of "leads" about persons who are interested in new loans. These lists are sold to numerous lenders all over the United States, and soon after the application the applicant starts receiving offers from all parts of the country. The trigger lists contain a significant amount of personal financial information. Among the buyers of trigger lists are "lead generators" which resell filtered information to borrowers, e.g., of people who live in a certain area and have a certain credit score. While the Federal Trade Commission considers the market of "trigger lists" to be a legal business, many people and organizations (such as the National Association of Mortgage Brokers) consider this a serious breach of privacy and lobby for putting this practice under regulatory controls. As of now, American consumers may opt-out from "trigger lists" by calling 1-888-5-OPTOUT (1-888-567-8688). == Nuclear non-proliferation == The Zangger Committee and the Nuclear Suppliers Group maintain lists of items that may contribute to nuclear proliferation; The nuclear non-proliferation treaty forbids its members to export such items to non-treaty members. these items are said to trigger the countries' responsibilities under the NPT, hence the name.
Read more →
Vero (app)

Vero (stylized as VERO) is a social media platform and mobile app company. Vero markets itself as a social network free from advertisements, data mining and algorithms. == History == The app was founded by French-Lebanese billionaire Ayman Hariri who is the son of former Lebanese prime minister Rafic Hariri. The name is taken from the Italian word for true. The app launched officially in 2015 as an alternative to Facebook and their popular photo-blogging app Instagram. Within weeks of its release the app surged in popularity although users expressed mixed reports with some feeling confused about how the app worked. Cosplayers were early to adopt the app as their photo-sharing platform of choice, favouring the app's pinch and zoom magnification feature over Instagram's zoom feature. Other creative communities soon followed, and the app became popular with niche groups of makeup artists, tattoo artists, and skateboarders. In March 2018, Vero's popularity surged, partly helped by an exodus from Facebook and Instagram following the Cambridge Analytica data scandal. In the wake of the scandal, Vero devised an advertising campaign aimed at defected Facebook and Instagram users, hoping the app's policies and privacy settings would assuage concerns over sharing personal information on the internet. Within the space of one week, the app went from being a small service, akin to Ello or Peach, to being the most downloaded app in eighteen countries. In December 2020, Vero released its most significant update to date, Vero 2.0 which introduced new features including voice and video calls, game and app posts and bookmarks, and refinements to the UI. In October 2021, Vero introduced their Desktop app (beta) with multiple post options and a re-sizable multi-column feed. == Concept and funding == Vero's content feed resembles Instagram's although users can share a wider variety of content and the app has a chronological content feed whereas Facebook and Instagram's feeds are algorithm based. Vero's business plan is also distinct from similar social media apps. Whereas its competitors such as Facebook or Instagram make money from in-app advertising revenue and the sale of user data, Vero's business plan was to invite the first one million users to use the app for free then charge any subsequent users a subscription fee. The app was entirely funded by its founder and generated additional revenues by charging affiliate fees when someone buys a product they find on Vero. == Awards == Vero was recognized at the 2021 Webbys, being named as an Honoree in the Best Visual Design - Aesthetic Category. == Controversies == === Privacy === Vero has faced some criticism over the wording of their manifesto, in particular, the statement "Vero only collects the data we believe is necessary to provide users with a great experience and to ensure the security of their accounts." Because this policy does not explicitly state that the app will not sell data on to third parties some users fear that the need to monetise the app through data might prove too tempting. Users have also complained about not being able to delete their accounts. While this was never the case, the option was hidden deep in the app's settings. === Russian involvement === Although Vero remains transparent about the app's Russian development team, they have been caught up in concerns about Russian interference on social media platforms. The app's founder Ayman Hariri was quick to dismiss the remarks as xenophobic and defend the nationality of his employees, stating in an interview with Time Magazine; "At the end of the day, where people are from is really not how anybody should judge anyone". === Criticism of the app's founder === Until 2013, Vero's founder Ayman Harari was deputy CEO and chairman of Saudi Oger, the Saudi Arabian construction company which collapsed in 2017, mired by controversies over the welfare and treatment of their employees. However, Hariri is quick to point out that he divested from the firm in 2014 and the worker's rights violations occurred after he had left the company.
Read more →
Collision detection

Collision detection is the computational problem of detecting an intersection of two or more objects in virtual space. More precisely, it deals with the questions of if, when, and where two or more objects intersect. Collision detection is a classic problem of computational geometry with applications in computer graphics, physical simulation, video games, robotics (including autonomous driving), and computational physics. Collision detection algorithms can be divided into operating on 2D or 3D spatial objects. == Overview == Collision detection is closely linked to calculating the distance between objects, as objects collide when the distance between them is less than or equal to zero. Negative distances indicate that one object has penetrated another. Performing collision detection requires more context than just the distance between the objects. Accurately identifying the points of contact on both objects' surfaces is also essential for computing a physically accurate collision response. The complexity of this task increases with the level of detail in the objects' representations: the more intricate the model, the greater the computational cost. Collision detection frequently involves dynamic objects, adding a temporal dimension to distance calculations. Instead of simply measuring distance between static objects, collision detection algorithms often aim to determine whether the objects' motion will bring them to a point in time when their distance is zero—an operation that adds significant computational overhead. In collision detection involving multiple objects, a naive approach would require detecting collisions for all pairwise combinations of objects. As the number of objects increases, the number of required comparisons grows rapidly: for n {\displaystyle n} objects, n ( n − 1 ) / 2 {n(n-1)}/{2} intersection tests are needed with a naive approach. This quadratic growth makes such an approach computationally expensive as n {\displaystyle n} increases. Due to the complexity mentioned above, collision detection is a computationally intensive process. Nevertheless, it is essential for interactive applications like video games, robotics, and real-time physics engines. To manage these computational demands, extensive efforts have gone into optimizing collision detection algorithms. A commonly used approach towards accelerating the required computations is to divide the process into two phases: the broad phase and the narrow phase. The broad phase aims to answer the question of whether objects might collide, using a conservative but efficient approach to rule out pairs that clearly do not intersect, thus avoiding unnecessary calculations. Objects that cannot be definitively separated in the broad phase are passed to the narrow phase. Here, more precise algorithms determine whether these objects actually intersect. If they do, the narrow phase often calculates the exact time and location of the intersection. == Broad phase == This phase aims at quickly finding objects or parts of objects for which it can be quickly determined that no further collision test is needed. A useful property of such approach is that it is output sensitive. In the context of collision detection this means that the time complexity of the collision detection is proportional to the number of objects that are close to each other. An early example of that is the I-COLLIDE where the number of required narrow phase collision tests was O ( n + m ) {\displaystyle O(n+m)} where n {\displaystyle n} is the number of objects and m {\displaystyle m} is the number of objects at close proximity. This is a significant improvement over the quadratic complexity of the naive approach. === Spatial partitioning === Several approaches can be grouped under the spatial partitioning umbrella, which includes octrees (for 3D), quadtrees (for 2D), binary space partitioning (or BSP trees) and other, similar approaches. If one splits space into a number of simple cells, and if two objects can be shown not to be in the same cell, then they need not be checked for intersection. Dynamic scenes and deformable objects require updating the partitioning which can add overhead. === Bounding volume hierarchy === Bounding Volume Hierarchy (BVH) is a tree structure over a set of bounding volumes. Collision is determined by doing a tree traversal starting from the root. If the bounding volume of the root doesn't intersect with the object of interest, the traversal can be stopped. If, however there is an intersection, the traversal proceeds and checks the branches for each there is an intersection. Branches for which there is no intersection with the bounding volume can be culled from further intersection test. Therefore, multiple objects can be determined to not intersect at once. BVH can be used with deformable objects such as cloth or soft-bodies but the volume hierarchy has to be adjusted as the shape deforms. For deformable objects we need to be concerned about self-collisions or self intersections. BVH can be used for that end as well. Collision between two objects is computed by computing intersection between the bounding volumes of the root of the tree as there are collision we dive into the sub-trees that intersect. Exact collisions between the actual objects, or its parts (often triangles of a triangle mesh) need to be computed only between intersecting leaves. The same approach works for pair wise collision and self-collisions. === Exploiting temporal coherence === During the broad-phase, when the objects in the world move or deform, the data-structures used to cull collisions have to be updated. In cases where the changes between two frames or time-steps are small and the objects can be approximated well with axis-aligned bounding boxes, the sweep and prune algorithm can be a suitable approach. Several key observation make the implementation efficient: Two bounding-boxes intersect if, and only if, there is overlap along all three axes; overlap can be determined, for each axis separately, by sorting the intervals for all the boxes; and lastly, between two frames updates are typically small (making sorting algorithms optimized for almost-sorted lists suitable for this application). The algorithm keeps track of currently intersecting boxes, and as objects move, re-sorting the intervals helps keep track of the status. === Pairwise pruning === Once a pair of physical bodies has been selected for further investigation, collisions need to be checked more carefully. However, in many applications, individual objects (if they are not too deformable) are described by a set of smaller primitives, mainly triangles. So there are two sets of triangles, S = S 1 , S 2 , … , S n {\displaystyle S={S_{1},S_{2},\dots ,S_{n}}} and T = T 1 , T 2 , … , T n {\displaystyle T={T_{1},T_{2},\dots ,T_{n}}} (for simplicity, each set has the same number of triangles.) The obvious thing to do is to check all triangles S j {\displaystyle S_{j}} against all triangles T k {\displaystyle T_{k}} for collisions, but this involves n 2 {\displaystyle n^{2}} comparisons, which is highly inefficient. If possible, it is desirable to use a pruning algorithm to reduce the number of pairs of triangles that need to be checked. The most widely used family of algorithms is known as the hierarchical bounding volumes method. As a preprocessing step, for each object (e.g., S {\displaystyle S} and T {\displaystyle T} ) calculates a hierarchy of bounding volumes. Then, at each time step, when collisions need to be checked between S {\displaystyle S} and T {\displaystyle T} , the hierarchical bounding volumes are used to reduce the number of pairs of triangles under consideration. For simplicity, provide an example using bounding spheres, although it has been noted that spheres are undesirable in many cases. If E {\displaystyle E} is a set of triangles, a bounding sphere is pre-calculated. B ( E ) {\displaystyle B(E)} . There are many ways of choosing B ( E ) {\displaystyle B(E)} , B ( E ) {\displaystyle B(E)} is a sphere that completely contains E {\displaystyle E} and is as small as possible. Ahead of time, B ( S ) {\displaystyle B(S)} and B ( T ) {\displaystyle B(T)} can be computed. Clearly, if these two spheres do not intersect (and that is very easy to test), then neither do S {\displaystyle S} and T {\displaystyle T} . This is not much better than an n-body pruning algorithm, however. If E = E 1 , E 2 , … , E m {\displaystyle E={E_{1},E_{2},\dots ,E_{m}}} is a set of triangles, then split it into two halves L ( E ) := E 1 , E 2 , … , E m / 2 {\displaystyle L(E):={E_{1},E_{2},\dots ,E_{m/2}}} and R ( E ) := E m / 2 + 1 , … , E m − 1 , E m {\displaystyle R(E):={E_{m/2+1},\dots ,E_{m-1},E_{m}}} . Apply this to S {\displaystyle S} and T {\displaystyle T} , and calculate (ahead of time) the bounding spheres B ( L ( S ) ) , B ( R ( S ) ) {\displaystyle B(L(S)),B(R(S))} and B ( L ( T ) ) , B ( R ( T ) ) {\displaystyle B(L(T)),B(R(T))} . T
Read more →
KidDesk

KidDesk is an alternative desktop software application. The early childhood learning company Hatch Early Childhood created KidDesk; it subsequently went to Edmark, which was bought by IBM then sold to Riverdeep (now Houghton Mifflin Harcourt Learning Technology). KidDesk is compatible with Microsoft Windows 95 and newer, as well as Apple System 7 and newer. KidDesk can be set to start when the computer starts up, and can only be exited through password entry. Adults choose what programs are included for the child to use, what icon represented the desk, and customize the software programs available for use. == History == Edmark first started shipping KidDesk in 1992. In 1993, Edmark updated KidDesk with KidDesk Family Edition for Macintosh and DOS, adding more desk accessories and desk styles (Sometimes included as a free exclusive offer with the Early Learning House and Thinkin' Things Series). In 1995, KidDesk Family Edition was enhanced for Windows 95, and released one month after the new operating system shipped. In 1998, Edmark developed KidDesk Internet Safe. The Internet Safe edition was written for Windows 95, Windows 98, and Macintosh (including OS8). In 2008, HMH ported KidDesk Family Edition was to run on Windows Vista and in 2011 version 3.07 of KidDesk Family Edition was released as part of the 'Young Explorer' suite which is fully supported on Windows XP, Windows Vista and Windows 7. == Features == A picture editor incorporated into the desk. Used both in the Adult settings menu and in the desk itself. KidDesk users can edit their user logo with a pixel grid paint program. A calendar incorporated into the desk. This allows the user to set dates that the user finds important, and allows the date to be marked with a picture or text. A password exit feature. For security reasons, the adult can set a password so that KidDesk can only be exited if it is entered. As an extra security measure, the password exit function could only be accessed if the user pressed the ctrl + alt + A keyboard buttons simultaneously. A skin changer with several themes - farm, princess, sports, ocean, etc. These themes can be changed. The e-mail and voicemail features are customizable depending on the KidDesk installation. The ability to add websites that can be accessed on KidDesk, and the ability to block hyperlinks, JavaScript, data entry, etc., on said sites was an added for the 'Internet Safe' edition released in 1998. KidDesk Internet Safe edition is available in Spanish and Brazilian-Portuguese versions. == Reception == KidDesk was given a platinum award at the 1994 Oppenheim Toy Portfolio Awards. The judges praised the program's security features allowing "configur[ation] so that kids never have access to the possibly destructive DOS prompt", and concluded that "[i]f you and your kids share a computer, you need to install Kiddesk immediately!" === Awards === Since 1992, KidDesk has won 15 major awards.
Read more →
Datasource

A datasource or DataSource is a name given to the connection set up to a database from a server. The name is commonly used when creating a query to the database. The data source name (DSN) need not be the same as the filename for the database. For example, a database file named friends.mdb could be set up with a DSN of school. Then DSN school would be used to refer to the database when performing a query. == Sun's version of DataSource [1] == A factory for connections to the physical data source that this DataSource object represents. An alternative to the DriverManager facility, a DataSource object is the preferred means of getting a connection. An object that implements the DataSource interface will typically be registered with a naming service based on the Java Naming and Directory Interface (JNDI) API. The DataSource interface is implemented by a driver vendor. There are three types of implementations: Basic implementation — produces a standard Connection object Connection pooling implementation — produces a Connection object that will automatically participate in connection pooling. This implementation works with a middle-tier connection pooling manager. Distributed transaction implementation — produces a Connection object that may be used for distributed transactions and almost always participates in connection pooling. This implementation works with a middle-tier transaction manager and almost always with a connection pooling manager. A DataSource object has properties that can be modified when necessary. For example, if the data source is moved to a different server, the property for the server can be changed. The benefit is that because the data source's properties can be changed, any code accessing that data source does not need to be changed. A driver that is accessed via a DataSource object does not register itself with the DriverManager. Rather, a DataSource object is retrieved through a lookup operation and then used to create a Connection object. With a basic implementation, the connection obtained through a DataSource object is identical to a connection obtained through the DriverManager facility. == Sun's DataSource Overview [2] == A DataSource object is the representation of a data source in the Java programming language. In basic terms, a data source is a facility for storing data. It can be as sophisticated as a complex database for a large corporation or as simple as a file with rows and columns. A data source can reside on a remote server, or it can be on a local desktop machine. Applications access a data source using a connection, and a DataSource object can be thought of as a factory for connections to the particular data source that the DataSource instance represents. The DataSource interface provides two methods for establishing a connection with a data source. Using a DataSource object is the preferred alternative to using the DriverManager for establishing a connection to a data source. They are similar to the extent that the DriverManager class and DataSource interface both have methods for creating a connection, methods for getting and setting a timeout limit for making a connection, and methods for getting and setting a stream for logging. Their differences are more significant than their similarities, however. Unlike the DriverManager, a DataSource object has properties that identify and describe the data source it represents. Also, a DataSource object works with a Java Naming and Directory Interface (JNDI) naming service and can be created, deployed, and managed separately from the applications that use it. A driver vendor will provide a class that is a basic implementation of the DataSource interface as part of its Java Database Connectivity (JDBC) 2.0 or 3.0 driver product. What a system administrator does to register a DataSource object with a JNDI naming service and what an application does to get a connection to a data source using a DataSource object registered with a JNDI naming service are described later in this chapter. Being registered with a JNDI naming service gives a DataSource object two major advantages over the DriverManager. First, an application does not need to hardcode driver information, as it does with the DriverManager. A programmer can choose a logical name for the data source and register the logical name with a JNDI naming service. The application uses the logical name, and the JNDI naming service will supply the DataSource object associated with the logical name. The DataSource object can then be used to create a connection to the data source it represents. The second major advantage is that the DataSource facility allows developers to implement a DataSource class to take advantage of features like connection pooling and distributed transactions. Connection pooling can increase performance dramatically by reusing connections rather than creating a new physical connection each time a connection is requested. The ability to use distributed transactions enables an application to do the heavy duty database work of large enterprises. Although an application may use either the DriverManager or a DataSource object to get a connection, using a DataSource object offers significant advantages and is the recommended way to establish a connection. Since 1.4 Since Java EE 6 a JNDI-bound DataSource can alternatively be configured in a declarative way directly from within the application. This alternative is particularly useful for self-sufficient applications or for transparently using an embedded database. == Yahoo's version of DataSource [3] == A DataSource is an abstract representation of a live set of data that presents a common predictable API for other objects to interact with. The nature of your data, its quantity, its complexity, and the logic for returning query results all play a role in determining your type of DataSource. For small amounts of simple textual data, a JavaScript array is a good choice. If your data has a small footprint but requires a simple computational or transformational filter before being displayed, a JavaScript function may be the right approach. For very large datasets—for example, a robust relational database—or to access a third-party webservice you'll certainly need to leverage the power of a Script Node or XHR DataSource.
Read more →
Hedgeable

Hedgeable, Inc. was a U.S. based financial services company and digital wealth management platform headquartered in New York City. Hedgeable was known for not following set allocations, and instead actively managing accounts in response to market movements. On August 9, 2018, Hedgeable closed its doors to new investors, with existing investors required to transfer out of the company. The company claimed that it was not shutting down but simply removing its SEC registration. == History == Hedgeable was founded in 2009 by twin brothers Michael and Matthew Kane, who previously worked at high-net worth investment managers such as Bridgewater Associates and Spruce Private Investors. Both Michael and Matthew graduated from Penn State University with degrees in finance. Hedgeable is a Registered Investment Advisor with the U.S. Securities and Exchange Commission. The company has received funding from SixThirty and Route 66 Ventures as well as various other angel investors. On August 9, 2018, Hedgeable closed its doors to new investors. == Investing Strategies == Hedgeable did not follow a buy-and-hold approach, but instead actively manages accounts in response to market movements focusing on downside protection in bear markets. Their strategy was different from other robo-advisors, which use Modern Portfolio Theory. Hedgeable offered investment options including Exchange Traded Funds (ETFs) to individual stocks, master limited partnerships, private equity and bitcoin. Mutual funds were not used in portfolios. Although the firm's focus was to provide a direct-to-consumer service, Hedgeable's investment strategies were available to financial advisors and institutions as well through a variety of platforms. == Product Features == When it was open to external clients, Hedgeable aimed to gamify their personal finance experience. Clients could open a new account or transfer an existing account. Hedgeable accepted retirement accounts, taxable accounts, business accounts and various other account types. Hedgeable offered the following features: Downside protection Account aggregation Alternative investments Alpha rewards API Mobile app It was awarded 4/5 for client transparency by Paladin Research. Hedgeable was the winner of the Finovate Fall 2015 Best of Show Award and the GREAT 2015 Tech Award (FinTech Category). In 2016, Hedgeable launched its first iOS mobile app in order to expand their product offerings.
Read more →
UpScrolled

UpScrolled is an Australian social media platform for microblogging and short-form online video sharing that was launched in June 2025 by Recursive Methods Pty Ltd. It was founded by Issam Hijazi. == History == UpScrolled was launched in June 2025 by Recursive Methods Pty Ltd. It was founded by Issam Hijazi, a Palestinian-Australian app developer. UpScrolled is backed by the Tech for Palestine incubator. In January 2026, UpScrolled saw increased attention and number of downloads after the acquisition of TikTok by a group of pro-Donald Trump US investors, including Larry Ellison, which led to calls to boycott TikTok and migrate to other apps. TikTok was alleged to be suppressing pro-Palestinian content, as well as news surrounding the killing of Alex Pretti in Minneapolis on the platform. UpScrolled subsequently climbed to the top 10 of Apple's App Store list of free apps. The app saw a reported 2,850% increase in downloads between 22 and 24 January 2026. As of 27 January 2026, UpScrolled "had been downloaded about 400,000 times in the US and 700,000 globally since launching in June 2025". The app became the most downloaded app in the Apple App store on 29 January 2026, following allegations that TikTok was suppressing videos and content opposed to Immigration and Customs Enforcement (ICE) under its new ownership. By 2 February 2026, UpScrolled had reached 2.5 million users. According to the Google Play Store and the Apple App Store, it has become the most downloaded social media app in the United States and Canada, with rising interest in the United Kingdom, France, Germany and Italy. On 14 February, UpScrolled was suspended from the Google Play Store; the suspension was reverted by 15 February. == Founder == Hijazi was born in Jordan. His parents and grandparents are from Safad, a northern Israeli city near the Lebanese border. He worked for IBM and Oracle prior to starting UpScrolled. Hijazi told Rest of World that he launched UpScrolled in response to Israel's genocide in Gaza which followed the October 7 attacks. He said, "I couldn't take it anymore. I lost family members in Gaza, and I didn't want to be complicit. So I was like, I'm done with this, I want to feel useful. I found this gap in the market, with a lot of people asking why there is no alternative to the Big Tech platforms for their content, which was getting censored." Hijazi also alleges that social media accounts that were posting pro-Palestinian content were getting shadow banned on larger platforms, and alleges that even his account was not exempt from being targeted by censors. Hijazi has further elaborated on the importance of social media independence to further the Palestinian cause. In January 2026, Web Summit Qatar announced that Hijazi would be an opening night speaker. Following the announcement, there was a surge in ticket sales for the summit. Hijazi lives in Sydney with his wife and daughter. He lost 60 family members during the Gaza war. == Features == UpScrolled's algorithm allows users to discover posts based on likes, comments, and shares with time decay and some randomness, all chronologically, with "no manipulation" according to the app's website. UpScrolled has an interface resembling a mix of Instagram and Twitter, allowing users to post and view text posts, photos, and videos. It also lets users send private messages to each other. The app is currently available for iOS and Android devices, with plans to upscale. UpScrolled does not include Israel as an option in its location selection menu. Cities such as Tel Aviv are included under "Occupied Territories of Palestine", and Palestine can also be set as the location. UpScrolled says that it is against censorship and shadow banning, and describes itself as "belong[ing] to the people who use it — not to hidden algorithms or outside agendas". Hijazi said, "The other platforms claim to be free speech platforms. But when it comes to anything on Palestine, that's a different story." UpScrolled states that it "does not tolerate hate speech, propaganda, or bad-faith behaviour, but it also refuses to silence voices quietly or without explanation". == User base and content == Al Jazeera reported that posts expressing pro-Palestinian sentiment or depicting the continued suffering in the Gaza Strip were "flooding" the app. Political and global issues such as the Gaza war are prominent. Content includes updates from the Gaza Freedom Flotilla, posts by doctors working in Gaza, video essays about Palantir’s influence within the military and calls for boycotts of Israel. It has been used by Gazans to crowdfund and record daily life. Celebrity users of UpScrolled include American labour activist Chris Smalls and actor Jacob Berger, both of whom were on the July 2025 Gaza Freedom Flotilla. Political figures have also joined UpScrolled, such as South African politician and Economic Freedom Fighters leader Julius Malema, and Islamic Revolutionary Guard Corps commander Esmail Qaani. One user said that most early users were attracted to the platform for the opportunity to criticize Zionism. The Jewish Telegraphic Agency (JTA) reported that UpScrolled was observed to be "flooded" with antisemitic and anti-Israel content, including Holocaust denial and accusations that Israel carried out the 9/11 attacks. In a statement, UpScrolled said, "Our content moderation hasn't been able to keep up with the massive rise of users this week. We're working with digital rights experts to grow our Trust & Safety team and are beefing up our content moderation to prevent this. We apologise to all impacted users, thank you for being part of Upscrolled." The Times reported in February 2026 that UpScrolled was hosting content that could potentially breach UK law, including antisemitic content and posts promoting Hamas, Hezbollah, Islamic State and Al-Qaeda, as well as footage of the 2019 Christchurch mosque shootings and content praising the perpetrators of the 2019 Halle synagogue shooting and 2018 Pittsburgh synagogue shooting. Antisemitic influencers Lucas Gage, Jake Shields, Stew Peters and Anastasia Maria Loupis have accounts on UpScrolled. UpScrolled’s policies prohibit threats, glorification of harm or support for terrorist or violent groups. Hijazi said harmful content was being uploaded to UpScrolled and the company had expanded its content moderation team and upgraded its technology infrastructure to deal with the issue. In May 2026, Moment magazine said that users had identified some antisemitic content, pornography and extremist videos on the platform. The magazine said there were gaps in content moderation due to the small size of the developer team. == Reception == In January 2026, the Council on American–Islamic Relations (CAIR) praised UpScrolled for "pledging to protect the free flow of ideas on its platform, including both support for and opposition to the Israeli government's human rights abuses." Guy Christensen, a pro-Palestinian social media celebrity, has encouraged his audience to download UpScrolled. Christensen characterized UpScrolled as having "no censorship, no ownership by billionaires who put their interests and biases onto you to control you". He compared the platform to others like TikTok, saying that Israel is behind censorship that wouldn't happen on UpScrolled. Jaigris Hodson, an associate professor of Interdisciplinary Studies at Royal Roads University in Canada, has argued that "Network effects mean that unless UpScrolled continues its explosive growth, people are unlikely to continue to choose it over the more established TikTok. At best, we might see a Twitter/X effect, which is where TikTok will host more pro-U.S. government content creators and those people who want to follow them, and UpScrolled will host more critical content creators and their followers."
Read more →
PANGU (software)

The PANGU (Planet and Asteroid Natural scene Generation Utility) is a computer graphics utility of which the development was funded by ESA and performed by University of Dundee. It generates scenes of planets, moons, asteroids, spacecraft and rovers. The main purpose of the tool is to test and validate navigation techniques based on the processing of images coming from on-board sensors, such as a camera or imaging LIDAR on a planetary lander.
Read more →
Period-tracking app

Period-tracking apps are mobile applications used to track the menstrual cycle. They may be used to predict menstruation, to plan fertility, and to track health. Examples include Clue, Glow, and Flo. == Function == Users enter their dates of menstruation, and frequently other experiences such as vaginal discharge and spotting; premenstrual syndrome; changes in mood; menstrual cramps and other pain; and other symptoms such as appetite changes, bloating, and acne. The apps predict the date of users' next period, and often also their ovulation and fertile window. Some apps have additional features such as contraceptive reminders, educational content, tracking modes for use during pregnancy, or the ability to share one's menstrual cycle data with a partner. == Privacy == Period-tracking apps collect personal health data, potentially raising concerns about privacy. Researchers have warned that data may be transferred to third parties and used for consumer profiling and targeted advertising, used for employment and health insurance discrimination, or used to prosecute users for seeking abortions. After the 2022 decision by the United States Supreme Court to overturn Roe v. Wade, and the bans and restrictions on abortion in many US states that followed, many American women uninstalled the apps amidst fear that the data could be accessed by law enforcement and used to prosecute users. WIRED published a ranking of several period-tracking apps by data privacy.
Read more →
RFPolicy

The RFPolicy outlines a method for contacting vendors about security vulnerabilities found in their products. It was initially written in 2000 by hacker and security consultant Rain Forest Puppy. It was perhaps the second disclosure policy, following Simple Nomad's. The policy gives the vendor five working days to respond to the reporter of the bug. If the vendor fails to contact the reporter within those five days, the issue is recommended to be disclosed to the general community. The reporter should help the vendor reproduce the bug and work out a fix. The reporter should delay notifying the general community about the bug if the vendor provides feasible reasons for requiring so. If the vendor fails to respond or shuts down communication with the reporter of the problem within five working days, the reporter should disclose the issue to the general community. When issuing an alert or fix, the vendor should give the reporter proper credit for reporting the bug. Context for the history of vulnerability disclosure is available in a history article.
Read more →