AI Code Tester

AI Code Tester — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Deep Learning Anti-Aliasing

  Deep Learning Anti-Aliasing (DLAA) is a form of spatial anti-aliasing developed by Nvidia. DLAA depends on and requires Tensor Cores available in Nvidia RTX cards. DLAA is similar to Deep Learning Super Sampling (DLSS) in its anti-aliasing method, with one important differentiation being that the goal of DLSS is to increase performance at the cost of image quality, whereas the main priority of DLAA is improving image quality at the cost of performance (irrelevant of resolution upscaling or downscaling). DLAA is similar to temporal anti-aliasing (TAA) in that they are both spatial anti-aliasing solutions relying on past frame data. Compared to TAA, DLAA is substantially better when it comes to shimmering, flickering, and handling small meshes like wires. == Technical overview == DLAA collects game rendering data including raw low-resolution input, motion vectors, depth buffers, and exposure information. This information feeds into a convolutional neural network that processes the image to reduce aliasing while preserving fine detail. The neural network architecture employs an auto-encoder design trained on high-quality reference images. The training dataset includes diverse scenarios focusing on challenging cases like sub-pixel details, high-contrast edges, and transparent surfaces. The network then processes frames in real-time. Unlike traditional anti-aliasing solutions that rely on manually written heuristics, such as TAA, DLAA uses its neural network to preserve fine details while eliminating unwanted visual artifacts. == History == DLAA was initially called and marketed by Nvidia as DLSS 2x. The first game that added support for DLAA was The Elder Scrolls Online, which implemented the feature in 2021. By June 2022, DLAA was only available in six games. This number rose to 17 by February 2023. In June 2023, TechPowerUp reported that "DLAA is seeing sluggish adoption among game developers", and that Nvidia was working on adding DLAA to the quality presets of DLSS to boost adoption. By December 2023, DLAA was supported in 41 games. In early 2025, an update for the Nvidia App added a driver-based DLSS override feature that enables users to activate DLAA even in games that do not support it natively. == Differences between TAA and DLAA == TAA is used in many modern video games and game engines; however, all previous implementations have used some form of manually written heuristics to prevent temporal artifacts such as ghosting and flickering. One example of this is neighborhood clamping which forcefully prevents samples collected in previous frames from deviating too much compared to nearby pixels in newer frames. This helps to identify and fix many temporal artifacts, but deliberately removing fine details in this way is analogous to applying a blur filter, and thus the final image can appear blurry when using this method. DLAA uses an auto-encoder convolutional neural network trained to identify and fix temporal artifacts, instead of manually programmed heuristics as mentioned above. Because of this, DLAA can generally resolve detail better than other TAA and TAAU implementations, while also removing most temporal artifacts. == Differences between DLSS and DLAA == While DLSS handles upscaling with a focus on performance, DLAA handles anti-aliasing with a focus on visual quality. DLAA runs at the given screen resolution with no upscaling or downscaling functionality provided by DLAA. DLSS and DLAA share the same AI-driven anti-aliasing method. As such, DLAA functions like DLSS without the upscaling part. Both are made by Nvidia and require Tensor Cores. However, DLSS and DLAA cannot be enabled at the same time, only one can be selected depending on whether performance or image quality is prioritized. == Reception == TechPowerUp found that "[c]ompared to TAA and DLSS, DLAA is clearly producing the best image quality, especially at lower resolutions", arguing that, while "DLSS was already doing a better job than TAA at reconstructing small objects", "DLAA does an even better job". In a Cyberpunk 2077 performance test, IGN stated that "DLAA provided somewhat similar results [FPS wise] to the normal raster mode in most cases but got significant performance boost with the help of frame generation", a feature not available when using native resolution. Rock Paper Shotgun noted that, while DLAA is "not a completely perfect form of anti-aliasing, as the occasional jaggies are present", it "looks a lot sharper overall [than TAA], and especially in motion." According to PC World, "DLAA offers very good anti-aliasing without losing visual information — alternatives like TAA tend to struggle during motion-filled scenes, where DLAA doesn’t. Furthermore, DLAA’s loss of performance is lower than with conventional anti-aliasing methods."

  Read more →
• 

  Excalidraw

  Excalidraw is an open-source, web-based virtual whiteboard and diagramming application. It is used to create diagrams, wireframes, and sketches within a web browser without requiring account registration. The software features a characteristic hand-drawn visual style and supports real-time multi-user collaboration using client-side end-to-end encryption. Excalidraw is released under the MIT License and is maintained by Excalidraw s.r.o., a company based in Brno, Czech Republic. == History == Excalidraw was created on 1 January 2020 by Christopher Chedeau, a software engineer at Meta Platforms. Chedeau, who previously co-created React Native and Prettier, initially developed the application as a personal project before registering the domain on 3 January 2020. Within its first months, the project attracted open-source contributors who assisted in expanding its features and rewriting the codebase into TypeScript and React. By early 2021, day-to-day operations moved to Czech developers David Luzar and Milos Vetesnik. In May 2021, the team incorporated Excalidraw s.r.o. in Brno and launched a commercial cloud-based version named Excalidraw+ to fund the open-source project's development. By May 2026, the main open-source repository on GitHub had accumulated over 123,000 stars. == Features and architecture == The application provides an infinite canvas for geometric shapes, lines, arrows, text, and freehand drawing. Its visual presentation relies on Rough.js, a JavaScript graphics library that alters standard vector paths to mimic irregular, hand-drawn lines. Excalidraw operates as a Progressive web application (PWA), allowing local installation and offline usage, saving data natively to local browser storage. Files use a native, JSON-based extension format (.excalidraw), and canvases can be exported to PNG or SVG formats. Real-time collaboration sessions are executed using Socket.IO via a relay server. Data transmission uses the browser's native Web Cryptography API to achieve end-to-end encryption. A symmetric AES key is generated on the client side and appended to the sharing URL as a fragment identifier (following the # character). Because web browsers do not transmit URL fragments to HTTP servers, the data remains unreadable to the distribution server. == Ecosystem == Excalidraw is distributed as an npm package, allowing third-party developers to embed the whiteboard component directly into external React web applications. Community-developed extensions integrate the application's file format into text editors and note-taking systems, including Visual Studio Code and Obsidian. The platform also has native integrations in commercial platforms such as Notion and HackerRank. == Reception == Google's developer relations team published a technical case study on Excalidraw as a reference implementation for Progressive Web Apps. The analysis highlighted the software's adoption of advanced web platform capabilities, specifically its utilization of the File System Access API and native Clipboard API to replicate desktop software behavior within a web browser environment.

  Read more →
• 

  Foveated imaging

  Foveated imaging is a digital image processing technique in which the image resolution, or amount of detail, varies across the image according to one or more "fixation points". A fixation point indicates the highest resolution region of the image and corresponds to the center of the eye's retina, the fovea. The location of a fixation point may be specified in many ways. For example, when viewing an image on a computer monitor, one may specify a fixation using a pointing device, like a computer mouse. Eye trackers which precisely measure the eye's position and movement are also commonly used to determine fixation points in perception experiments. When the display is manipulated with the use of an eye tracker, this is known as a gaze contingent display. Fixations may also be determined automatically using computer algorithms. Some common applications of foveated imaging include imaging sensor hardware and image compression. For descriptions of these and other applications, see the list below. Miniaturized foveated imaging systems can be realized by high-resolution 3D printing of multi-lens objectives directly on a CMOS (Complementary metal-oxide-semiconductor) chip. Foveated imaging is also commonly referred to as space variant imaging or gaze contingent imaging. == Applications == === Compression === Contrast sensitivity falls off dramatically as one moves from the center of the retina to the periphery. In lossy image compression, one may take advantage of this fact in order to compactly encode images. If one knows the viewer's approximate point of gaze, one may reduce the amount of information contained in the image as the distance from the point of gaze increases. Because the fall-off in the eye's resolution is dramatic, the potential reduction in display information can be substantial. Also, foveation encoding may be applied to the image before other types of image compression are applied and therefore can result in a multiplicative reduction. === Foveated sensors === Foveated sensors are multiresolution hardware devices that allow image data to be collected with higher resolution concentrated at a fixation point. An advantage to using foveated sensor hardware is that the image collection and encoding can occur much faster than in a system that post-processes a high resolution image in software. === Simulation === Foveated imaging has been used to simulate visual fields with arbitrary spatial resolution. For example, one may present video containing a blurred region representing a scotoma. By using an eye-tracker and holding the blurred region fixed relative to the viewer's gaze, the viewer will have a visual experience similar to that of a person with an actual scotoma. === Video gaming === Foveated rendering is a rendering optimization technique which uses an eye tracker integrated with a virtual reality headset to reduce the rendering workload by greatly reducing the image quality in the peripheral vision (outside of the zone gazed by the fovea).. However, other than the near-eye displays (e.g., virtual reality headset), foveated rendering is also suitable for large high-resolution display walls, desktop monitor, and even for smart phones. Over the time different foveated rendering techniques are proposed, for instance, adaptive resolution, geometric simplification, shading simplification and chromatic degradation, spatio-temporal deterioration . If we consider the variable sample distribution of physically-based rendering under the shader (e.g., hit/miss etc.), then this degradation strategies are applied on overall foveated rendering. At the CES 2016, SensoMotoric Instruments (SMI) demoed a new 250 Hz eye tracking system and a working foveated rendering solution. It resulted from a partnership with camera sensor manufacturer Omnivision who provided the camera hardware for the new system. The Apple Vision Pro mixed reality headset features dynamic foveated rendering provided by its visionOS operating system. === Quality assessment === Foveated imaging may be useful in providing a subjective image quality measure. Traditional image quality measures, such as peak signal-to-noise ratio, are typically performed on fixed resolution images and do not take into account some aspects of the human visual system, like the change in spatial resolution across the retina. A foveated quality index may therefore more accurately determine image quality as perceived by humans. === Image database retrieval === In databases that contain very high resolution images, such as a satellite image database, it may be desirable to interactively retrieve images in order to reduce retrieval time. Foveated imaging allows one to scan low resolution images and retrieve only high resolution portions as they are needed. This is sometimes called progressive transmission. == Example images ==

  Read more →
• 

  MetroHero

  MetroHero is a semi-defunct real-time transit tracking and performance analysis application for the Washington Metro rapid transit system. Originally available on iOS, Android, and the web, it allows users to view live maps of all trains on a specific line, summary statistics relating to real-time system performance, and user feedback on current Metro conditions. The app launched in 2015, followed by ARIES for Transit, a related project from the same developers, and continued functioning until its original developers shut it down in 2023. Afterwards, forks of the application went live to allow for its continued public use, and the Washington Metropolitan Area Transit Authority (WMATA), Metro's operator, announced that it would launch a similar app. The app has been described by local news media as popular and well-liked among Washington, D.C.-area residents. == History and main development == MetroHero was initially developed by James and Jennifer Pizzurro, who both attended George Washington University and studied computer science. They said that they were inspired to create the app after experiencing train delays and searching for an app to track a train after boarding; such an app did not exist for the Washington Metro. The development of the app was not endorsed by WMATA, but it did use publicly available data from the agency. MetroHero launched as an Android application in September 2015, followed by the release of an iOS-compatible web app in December of that year. A standalone iOS app launched in April 2018, but the web app remained supported. By April 2018, MetroHero had approximately 13,000 monthly active users. James Pizzurro has stated that the app's intended audience was regular Metro commuters who wanted to communicate with each other about active problems, as opposed to tourists and riders who only wanted train time data. Throughout the application's development, the Pizzurros had been advocates for Metro's transparency with riders and the community by providing more high-quality data and taking on the feedback of developers. In particular, they criticized Metro's reluctance to uniquely identify individual train trips and its decision to obscure data under certain circumstances, which have posed problems for MetroHero's data collection. In addition to their work on MetroHero, the app's developers led or participated in other initiatives related to transit in the Greater Washington area. In 2019, MetroHero partnered with a local transit group to analyze Metrobus data and publish a "Metrobus Report Card", along with proposed goals and recommendations based on the report's findings. Based on this experience, MetroHero's developers began a sister project, the Adherence + Reliability + Integrity Evaluation System for Transit (ARIES for Transit), which displays data and issues grades for Washington- and Baltimore-area transit systems. Separately, James Pizzurro used MetroHero data to inform Rail Transit OPS, an independent Metro oversight group, and assist in its documentation of Metro system incidents. == Application == The MetroHero application uses several interfaces, including an overall dashboard and a live map, to display data to its users. On the dashboard, system-wide train summary data, such as the number of operating trains and headway adherence, is visible. The map offers a visual representation of all trains' positions throughout the system, filtered by line. Individual stations and trains can be selected to see ratings and comments provided by other users, including both positive and negative notes like cleanliness and crowdedness. Additionally, a list of train wait times is given, along with aggregate data like average wait time. Any train delays or service incidents are visible in the app. MetroHero uses several data sources for the various components of its application. Train positions and other operational data are provided by WMATA as part of its initiative to release open data for third-party developers. However, MetroHero's developers noted that the Metro-provided information is sometimes inaccurate and incomplete, thereby limiting the accuracy of MetroHero. The app also collects crowdsourced data from its users, who can report conditions in train cars and stations and add to reports sent by other people. Additionally, MetroHero parses data from Twitter feeds to learn about system incidents, including delays and fires. In addition to the web app, Android app, and iOS app, MetroHero's initial developers maintained automated social media accounts that alerted customers about Metro service; these accounts were discontinued upon the original app's eventual shutdown. MetroHero also hosts archived performance data for later review, a feature that is sometimes used after major incidents. == Shutdown and future == In February 2023, James Pizzurro announced that MetroHero would be shut down on July 1, 2023, citing "positive changes ... in the app landscape and in WMATA's data management and communication" and the costs and time associated with maintaining the app. Shortly before the application's end date, the Pizzurros shared MetroHero's source code on GitHub, which prompted others to fork the code and begin maintaining new instances of MetroHero to succeed the original app. The original website went offline on July 1, as planned. Historically, WMATA has not offered its own real-time map or similar service, citing other apps from third parties which accomplished the same task. However, on June 30, 2023, Randy Clarke, WMATA's general manager, announced that Metro would begin offering a similar service as MetroHero did. The app, initially named MetroMeter, was planned to begin operating in early July and would provide real-time information on trains, headways, and service schedules. Metro also noted its intentions to extend this service to Metrobus and MetroAccess. On July 20, Metro announced that the app had been renamed to MetroPulse and launched it in beta. MetroHero's other project, ARIES for Transit, was not affected by the shutdown. == Reception == MetroHero was generally well-received and has been recognized for its usage among Washington-area commuters. DCist called it one of the "most praised" Metro tracking apps, and WMATA publicly acknowledged its popularity when announcing its decision to establish MetroPulse. Chris Barnes, a member of the Metro Riders' Advisory Council, said that the app is considered important among riders because it fulfills a need for riders to have reliable and transparent transit information, albeit somewhat hindered by flaws in WMATA's data.

  Read more →
• 

  Coolgorilla

  Coolgorilla was one of the earliest software developers that created 3rd party native applications for Apple iPod devices. Coolgorilla was an early adopter of using a sponsorship business model to enable mobile applications to be given away freely. Coolgorilla developed a series of Talking Phrasebooks for iPods in 2006. They partnered with online travel company lastminute.com who sponsored the applications enabling them to be made available to download completely free of charge. As mobile devices became more sophisticated, Coolgorilla developed the Talking Phrasebooks for Sony Ericsson and Nokia Mobile Devices which at the time were considerably noteworthy since the applications used real voice audio translations. With Apple's introduction of the iPhone in 2007, Coolgorilla developed a Web App before having four of the iPhone Talking Phrasebooks available to download from Apple's App Store on the day it opened in 2008. == Almanac in Chronological Order == On 23 December 2005, CoolGorilla, a new start-up, launched a trivia game for the iPod. It was titled "Rock and Pop Quiz". It was a quiz game that tested users' knowledge on bands such as U2, Metallica, Beyonce, and the Beatles. The quiz contained twenty megabytes of audible trivia questions. The free game was compatible with 3rd, 4th and 5th generation iPods, iPod mini and nano. In March 2006, Coolgorilla released "Movie Quiz for iPods" with a price of $5. It was an audio game narrated by New York's DJ Thomas, a radio and television host, voice over artist and event Master of Ceremonies. There were questions on Star Wars, Spiderman, The Godfather, Pulp Fiction, The Matrix, James Bond, and others. The user could keep track of their score. The game included a secret code for players who answered all questions correctly which enabled users to enter their name on the Coolgorilla Hall of Fame. In May 2006, Coolgorilla launched a World Cup Encyclopedia which was released prior to the 2006 FIFA World Cup. It had information on the World Cup schedule, details of every player from every team, every score from every world cup game ever played, stadium details, and manager profiles. It was a free download. In June 2006, Coolgorilla released a series of iPod Phrasebooks in German, Greek, French and Spanish. They were sponsored by lastminute.com and were free. The phrasebooks included common words and phrases for tourists with 750 sound files. They were accessed through the iPod's Notes feature. In April 2007, Coolgorilla released a downloadable version of the Talking Phrasebooks for Nokia and Sony Ericsson mobile devices. French, Spanish, German, Greek, Italian, and Portuguese were produced. The application provided real voice translations. They initially sold for £3 but 3 months later were offered for free. The branding was lastminute.com branding. Apple's iPhone was released at the end of June 2007. Soon after, Coolgorilla released an online all-in-one version of their Talking Phrasebooks for iPhone (Web App). The Phrasebooks were made available online in the form of a web app as iPhone did not yet allow for the download of additional apps. The app provided both text and audio translations in French, Spanish, Portuguese, Italian, German, and Greek. The iPhone translated the phrases using the recordings of real, native voice-over artists. A text translation on screen was also displayed. Apple's App Store opened in July 2008 with approximately 500 native apps available. Four of these Apps were Coolgorilla's Talking Phrasebooks for iPhone (Native Apps). There was French, German, Italian, and Spanish. These Apps carried lastminute.com branding and were available for free download. In the first three weeks following their release, the phrasebooks had over 350,000 downloads. Subsequently, Dutch, Arabic, Mandarin and Cantonese were also released. In October 2008, Coolgorilla released an iPhone London Travel Guide. Coolgorilla featured on NBC News in August 2009. In 2010, FIAT used the Italian Phrasebook to help promote the release of their FIAT 500 in the US. There has been no further activity since.

  Read more →
• 

  Toad (software)

  Toad is a database management toolset from Quest Software for managing relational and non-relational databases using SQL aimed at database developers, database administrators, and data analysts. The Toad toolset runs against Oracle, SQL Server, IBM DB2 (LUW & z/OS), SAP and MySQL. A Toad product for data preparation supports many data platforms. == History == A practicing Oracle DBA, Jim McDaniel, designed Toad for his own use in the mid-1990s. He called it Tool for Oracle Application Developers, shortened to "TOAD". McDaniel initially distributed the tool as shareware and later online as freeware. Quest Software acquired TOAD in October 1998. Quest Software itself was acquired by Dell in 2012 to form Dell Software. In June 2016, Dell announced the sale of their software division, including the Quest business, to Francisco Partners and Elliott Management Corporation. On October 31, 2016, the sale was finalized. On November 1, 2016, the sale of Dell Software to Francisco Partners and Elliott Management was completed, and the company re-launched as Quest Software. == Features == Connection Manager - Allow users to connect natively to the vendor’s database whether on-premise or DBaaS. Browser - Allow users to browse all the different database/schema objects and their properties effective management. Editor - A way to create and maintain scripts and database code with debugging and integration with source control. Unit Testing (Oracle) - Ensures code is functionally tested before it is released into production. Static code review (Oracle) - Ensures code meets required quality level using a rules-based system. SQL Optimization - Provides developers with a way to tune and optimize SQL statements and database code without relying on a DBA. Advanced optimization enables DBAs to tune SQL effectively in production. Scalability testing and database workload replay - Ensures that database code and SQL will scale properly before it gets released into production. == Books == Toad Pocket Reference for Oracle plsql 1st Edition by Jim McDaniel and Patrick McGrath, O'Reilly, 2002 (ISBN 0596003374, ISBN 978-0-596-00337-1) Toad Pocket Reference for Oracle 2nd Edition by Jeff Smith, Bert Scalzo, and Patrick McGrath, O'Reilly, 2005 (ISBN 0596009712, ISBN 978-0-596-00971-7) TOAD Handbook by Bert Scalzo and Dan Hotka, Sams, 2003 (ISBN 0672324865, ISBN 978-0-672-32486-4) TOAD Handbook 2nd Edition by Bert Scalzo and Dan Hotka, Addison-Wesley Professional, 2009 (ISBN 0321649109, ISBN 978-0-321-64910-2). TOAD Handbook 2nd Edition by Bert Scalzo and Dan Hotka, Addison-Wesley Professional, 2009 (ISBN 0321649109, ISBN 978-0-321-64910-2).

  Read more →
• 

  Observability (software)

  In software engineering, more specifically in distributed computing, observability is the ability to collect data about programs' execution, modules' internal states, and the communication among components. To improve observability, software engineers use a wide range of logging and tracing techniques to gather telemetry information, and tools to analyze and use it. Observability is foundational to site reliability engineering, as it is the first step in triaging a service outage. One of the goals of observability is to minimize the amount of prior knowledge needed to debug an issue. == Etymology, terminology and definition == The term is borrowed from control theory, where the "observability" of a system measures how well its state can be determined from its outputs. Similarly, software observability measures how well a system's state can be understood from the obtained telemetry (metrics, logs, traces, profiling). The definition of observability varies by vendor: Observability is the process of making a system’s internal state more transparent. Systems are made observable by the data they produce, which in turn helps you to determine if your infrastructure or application is healthy and functioning normally. a measure of how well you can understand and explain any state your system can get into, no matter how novel or bizarre [...] without needing to ship new code software tools and practices for aggregating, correlating and analyzing a steady stream of performance data from a distributed application along with the hardware and network it runs onobservability starts by shipping all your raw data to central service before you begin analysisthe ability to measure a system’s current state based on the data it generates, such as logs, metrics, and traces Observability is tooling or a technical solution that allows teams to actively debug their system. Observability is based on exploring properties and patterns not defined in advance. proactively collecting, visualizing, and applying intelligence to all of your metrics, events, logs, and traces—so you can understand the behavior of your complex digital system The term is frequently referred to as its numeronym o11y (where 11 stands for the number of letters between the first letter and the last letter of the word). This is similar to other computer science abbreviations such as i18n and l10n and k8s. === Observability vs. monitoring === Observability and monitoring are sometimes used interchangeably. As tooling, commercial offerings and practices evolved in complexity, "monitoring" was re-branded as observability in order to differentiate new tools from the old. The terms are commonly contrasted in that systems are monitored using predefined sets of telemetry, and monitored systems may be observable. Majors et al. suggest that engineering teams that only have monitoring tools end up relying on expert foreknowledge (seniority), whereas teams that have observability tools rely on exploratory analysis (curiosity). == Telemetry types == Observability relies on three main types of telemetry data: metrics, logs and traces. Those are often referred to as "pillars of observability". === Metrics === A metric is a point in time measurement (scalar) that represents some system state. Examples of common metrics include: number of HTTP requests per second; total number of query failures; database size in bytes; time in seconds since last garbage collection. Monitoring tools are typically configured to emit alerts when certain metric values exceed set thresholds. Thresholds are set based on knowledge about normal operating conditions and experience. Metrics are typically tagged to facilitate grouping and searchability. Application developers choose what kind of metrics to instrument their software with, before it is released. As a result, when a previously unknown issue is encountered, it is impossible to add new metrics without shipping new code. Furthermore, their cardinality can quickly make the storage size of telemetry data prohibitively expensive. Since metrics are cardinality-limited, they are often used to represent aggregate values (for example: average page load time, or 5-second average of the request rate). Without external context, it is impossible to correlate between events (such as user requests) and distinct metric values. === Logs === Logs, or log lines, are generally free-form, unstructured text blobs that are intended to be human readable. Modern logging is structured to enable machine parsability. As with metrics, an application developer must instrument the application upfront and ship new code if different logging information is required. Logs typically include a timestamp and severity level. An event (such as a user request) may be fragmented across multiple log lines and interweave with logs from concurrent events. === Traces === ==== Distributed traces ==== A cloud native application is typically made up of distributed services which together fulfill a single request. A distributed trace is an interrelated series of discrete events (also called spans) that track the progression of a single user request. A trace shows the causal and temporal relationships between the services that interoperate to fulfill a request. Instrumenting an application with traces means sending span information to a tracing backend. The tracing backend correlates the received spans to generate presentable traces. To be able to follow a request as it traverses multiple services, spans are labeled with unique identifiers that enable constructing a parent-child relationship between spans. Span information is typically shared in the HTTP headers of outbound requests. === Continuous profiling === Continuous profiling is another telemetry type used to precisely determine how an application consumes resources. === Instrumentation === To be able to observe an application, telemetry about the application's behavior needs to be collected or exported. Instrumentation means generating telemetry alongside the normal operation of the application. Telemetry is then collected by an independent backend for later analysis. In fast-changing systems, instrumentation itself is often the best possible documentation, since it combines intention (what are the dimensions that an engineer named and decided to collect?) with the real-time, up-to-date information of live status in production. Instrumentation can be automatic, or custom. Automatic instrumentation offers blanket coverage and immediate value; custom instrumentation brings higher value but requires more intimate involvement with the instrumented application. Instrumentation can be native - done in-code (modifying the code of the instrumented application) - or out-of-code (e.g. sidecar, eBPF). Verifying new features in production by shipping them together with custom instrumentation is a practice called "observability-driven development". == "Pillars of observability" == Metrics, logs and traces are most commonly listed as the pillars of observability. Majors et al. suggest that the pillars of observability are high cardinality, high-dimensionality, and explorability, arguing that runbooks and dashboards have little value because "modern systems rarely fail in precisely the same way twice." == Self monitoring == Self monitoring is a practice where observability stacks monitor each other, in order to reduce the risk of inconspicuous outages. Self monitoring may be put in place in addition to high availability and redundancy to further avoid correlated failures.

  Read more →
• 

  Programming tool

  A programming tool or software development tool is a computer program that is used to develop another computer program, usually by helping the developer manage computer files. For example, a programmer may use a tool called a source code editor to edit source code files, and then a compiler to convert the source code into machine code files. They may also use build tools that automatically package executable program and data files into shareable packages or install kits. A set of tools that are run one after another, with each tool feeding its output to the next one, is called a toolchain. An integrated development environment (IDE) integrates the function of several tools into a single program. Usually, an IDE provides a source code editor as well as other built-in or plug-in tools that help with compiling, debugging, and testing. Whether a program is considered a development tool can be subjective. Some programs, such as the GNU compiler collection, are used exclusively for software development while others, such as Notepad, are not meant specifically for development but are nevertheless often used for programming. == Categories == Notable categories of development tools: Assembler – Converts assembly language into machine code Bug tracking system – Software application that records software bugs Build automation – Building software via an unattended fashion Code review software – Activity where one or more people check a program's code Compiler – Software that translates code from one programming language to another Compiler-compiler – Program that generates parsers or compilers, a.k.a. parser generator Debugger – Software for debugging a computer program Decompiler – Program translating executable to source code Disassembler – Computer program to translate machine language into assembly language Documentation generator – Automation technology for creating software documentation Graphical user interface builder – Software development tool Linker – Program that combines intermediate build files into an executable file Loader – Loads executable files into memory and prepares them for execution by the CPU. Memory debugger – Software memory problem finder Minifier – Removal of unnecessary characters in code without changing its functionality Pretty-printer – Formatting to make code or markup easier to readPages displaying short descriptions of redirect targets Performance profiler – Measuring the time or resources used by a section of a computer program Static code analyzer – Analysis of computer programs without executing themPages displaying short descriptions of redirect targets Source code editor – Text editor specializing in software codePages displaying short descriptions of redirect targets Source code generation – Type of computer programmingPages displaying short descriptions of redirect targets Version control system – Stores and tracks versions of files

  Read more →
• 

  Super-resolution optical fluctuation imaging

  Super-resolution optical fluctuation imaging (SOFI) is a post-processing method for the calculation of super-resolved images from recorded image time series that is based on the temporal correlations of independently fluctuating fluorescent emitters. SOFI has been developed for super-resolution of biological specimen that are labelled with independently fluctuating fluorescent emitters (organic dyes, fluorescent proteins). In comparison to other super-resolution microscopy techniques such as STORM or PALM that rely on single-molecule localization and hence only allow one active molecule per diffraction-limited area (DLA) and timepoint, SOFI does not necessitate a controlled photoswitching and/ or photoactivation as well as long imaging times. Nevertheless, it still requires fluorophores that are cycling through two distinguishable states, either real on-/off-states or states with different fluorescence intensities. In mathematical terms SOFI-imaging relies on the calculation of cumulants, for what two distinguishable ways exist. For one thing an image can be calculated via auto-cumulants that by definition only rely on the information of each pixel itself, and for another thing an improved method utilizes the information of different pixels via the calculation of cross-cumulants. Both methods can increase the final image resolution significantly although the cumulant calculation has its limitations. Actually SOFI is able to increase the resolution in all three dimensions. == Principle == Likewise to other super-resolution methods SOFI is based on recording an image time series on a CCD- or CMOS camera. In contrary to other methods the recorded time series can be substantially shorter, since a precise localization of emitters is not required and therefore a larger quantity of activated fluorophores per diffraction-limited area is allowed. The pixel values of a SOFI-image of the n-th order are calculated from the values of the pixel time series in the form of a n-th order cumulant, whereas the final value assigned to a pixel can be imagined as the integral over a correlation function. The finally assigned pixel value intensities are a measure of the brightness and correlation of the fluorescence signal. Mathematically, the n-th order cumulant is related to the n-th order correlation function, but exhibits some advantages concerning the resulting resolution of the image. Since in SOFI several emitters per DLA are allowed, the photon count at each pixel results from the superposition of the signals of all activated nearby emitters. The cumulant calculation now filters the signal and leaves only highly correlated fluctuations. This provides a contrast enhancement and therefore a background reduction for good measure. As it is implied in the figure on the left the fluorescence source distribution: ∑ k = 1 N δ ( r → − r → k ) ⋅ ε k ⋅ s k ( t ) {\displaystyle \sum _{k=1}^{N}\delta ({\vec {r}}-{\vec {r}}_{k})\cdot \varepsilon _{k}\cdot s_{k}(t)} is convolved with the system's point spread function (PSF) U(r). Hence the fluorescence signal at time t and position r → {\displaystyle {\vec {r}}} is given by F ( r → , t ) = ∑ k = 1 N U ( r → − r → k ) ⋅ ε k ⋅ s k ( t ) . {\displaystyle F({\vec {r}},t)=\sum _{k=1}^{N}U({\vec {r}}-{\vec {r}}_{k})\cdot \varepsilon _{k}\cdot s_{k}(t).} Within the above equations N is the amount of emitters, located at the positions r → k {\displaystyle {\vec {r}}_{k}} with a time-dependent molecular brightness ε k ⋅ s k {\displaystyle \varepsilon _{k}\cdot s_{k}} where ε k {\displaystyle \varepsilon _{k}} is a variable for the constant molecular brightness and s k ( t ) {\displaystyle s_{k}(t)} is a time-dependent fluctuation function. The molecular brightness is just the average fluorescence count-rate divided by the number of molecules within a specific region. For simplification it has to be assumed that the sample is in a stationary equilibrium and therefore the fluorescence signal can be expressed as a zero-mean fluctuation: δ F ( r → , t ) = F ( r → , t ) − ⟨ F ( r → , t ) ⟩ t {\displaystyle \delta F({\vec {r}},t)=F({\vec {r}},t)-\langle F({\vec {r}},t)\rangle _{t}} where ⟨ ⋯ ⟩ t {\displaystyle \langle \cdots \rangle _{t}} denotes time-averaging. The auto-correlation here e.g. the second-order can then be described deductively as follows for a certain time-lag τ {\displaystyle \tau } : δ F ( r → , t ) = ⟨ δ F ( r → , t + τ ) ⋅ δ F ( r → , t ) ⟩ t {\displaystyle \delta F({\vec {r}},t)=\langle \delta F({\vec {r}},t+\tau )\cdot \delta F({\vec {r}},t)\rangle _{t}} From these equations it follows that the PSF of the optical system has to be taken to the power of the order of the correlation. Thus in a second-order correlation the PSF would be reduced along all dimensions by a factor of 2 {\displaystyle {\sqrt {2}}} . As a result, the resolution of the SOFI-images increases according to this factor. === Cumulants versus correlations === Using only the simple correlation function for a reassignment of pixel values, would ascribe to the independency of fluctuations of the emitters in time in a way that no cross-correlation terms would contribute to the new pixel value. Calculations of higher-order correlation functions would suffer from lower-order correlations for what reason it is superior to calculate cumulants, since all lower-order correlation terms vanish. == Cumulant-calculation == === Auto-cumulants === For computational reasons it is convenient to set all time-lags in higher-order cumulants to zero so that a general expression for the n-th order auto-cumulant can be found: A C n ( r → , τ 1 … n − 1 = 0 ) = ∑ k = 1 N U n ( r → − r → k ) ε k n w k ( 0 ) {\displaystyle AC_{n}({\vec {r}},\tau _{1\ldots n-1}=0)=\sum _{k=1}^{N}U^{n}({\vec {r}}-{\vec {r}}_{k})\varepsilon _{k}^{n}w_{k}(0)} w k {\displaystyle w_{k}} is a specific correlation based weighting function influenced by the order of the cumulant and mainly depending on the fluctuation properties of the emitters. Albeit there is no fundamental limitation in calculating very high orders of cumulants and thereby shrinking the FWHM of the PSF there are practical limitations according to the weighting of the values assigned to the final image. Emitters with a higher molecular brightness will show a strong increase in terms of the pixel cumulant value assigned at higher-orders as well as this performance can be expected from a diverse appearance of fluctuations of different emitters. A wide intensity range of the resulting image can therefore be expected and as a result dim emitters can get masked by bright emitters in higher-order images:. The calculation of auto-cumulants can be realized in a very attractive way in a mathematical sense. The n-th order cumulant can be calculated with a basic recursion from moments K n ( r → ) = μ n ( r → ) − ∑ i = 1 n − 1 ( n − 1 i ) K n − i ( r → ) μ i ( r → ) {\displaystyle K_{n}({\vec {r}})=\mu _{n}({\vec {r}})-\sum _{i=1}^{n-1}{\begin{pmatrix}n-1\\i\end{pmatrix}}K_{n-i}({\vec {r}})\mu _{i}({\vec {r}})} where K is a cumulant of the index's order, likewise μ {\displaystyle \mu } represents the moments. The term within the brackets indicates a binomial coefficient. This way of computation is straightforward in comparison with calculating cumulants with standard formulas. It allows for the calculation of cumulants with only little time of computing and is, as it is well implemented, even suitable for the calculation of high-order cumulants on large images. === Cross-cumulants === In a more advanced approach cross-cumulants are calculated by taking the information of several pixels into account. Cross-cumulants can be described as follows: C C n ( r → , τ 1 … n − 1 = 0 ) = ∏ j < l n U ( r → j − r → l n ) ⋅ ∑ i = 1 N U n ( r → i − ∑ k n r → k n ) ε i n w i ( 0 ) {\displaystyle CC_{n}({\vec {r}},\tau _{1\ldots n-1}=0)=\prod _{j Read more →

• 

  WorkingPoint

  WorkingPoint is a web-based application that provides a suite of small business management tools. It is designed to serve as a single point of access for various business operations, featuring a user-friendly interface. WorkingPoint's functionalities include double-entry bookkeeping, contact management, inventory management, invoicing, and bill and expense management. == Company == WorkingPoint, formerly Netbooks Inc, is a privately held corporation based in San Francisco, CA. The company is backed by CMEA Capital, also based in San Francisco. WorkingPoint has about ten employees and is led by CEO Tate Holt and Chairman Tom Proulx. Proulx is a co-founder of Intuit and an original author of that company’s Quicken personal finance software. The company was founded in 2007 under its original name Netbooks by co-creator Ridgely Evers. Evers set out to design a product that was more user-friendly than Intuit’s Quickbooks, which he also co-created. In mid-2009 the company officially rebranded itself and its flagship product “WorkingPoint”. The purpose of the re-branding was to disassociate the company from the product category of small laptops also known as netbooks. == Social Media Presence == WorkingPoint maintains a daily blog geared toward small business owners and managers. Each week the blog is updated with 3 WorkingPoint product feature or “how-to” posts, 2 subscriber company profiles, and 2 small business coaching posts. The company also maintains a Twitter page and a Facebook page. == Product Description (Free Version) == WorkingPoint allows businesses to invoice up to five customers (repeatedly) and provides account access for up to two individual users free of charge. Online Invoicing WorkingPoint allows users to create customized quotes and invoices online. The invoices can be used to bill customers via email or hardcopy post. WorkingPoint compiles the info from these invoices so users can track customer payments, inventory costs, shipping charges, accounts receivable and sales taxes. Users can also manage customer overpayments, provide customer loyalty discounts, and view a customer invoice history. Bill & Expense Management Users can track their bills and expenses by entering info into the WorkingPoint interface. WorkingPoint compiles this info so users can track categorized expenses, accounts paid, accounts payable, and vendor purchase history. The interface also allows users to add to their inventory while entering billing info. Double-Entry Bookeeping WorkingPoint automatically records entries under the double-entry bookkeeping system (also known as debits and credits) when the user completes invoicing and expense forms. Users can view transactions in general ledger format and perform closing entries if necessary. This functionality is designed for users who do not have an accounting background. Business Contact Management WorkingPoint provides an interface for users to manage their customer and vendor contact info. The software automatically tracks the user’s relationship with contacts, so users can track a contact’s sales and purchase history. Contacts can be imported and exported via numerous email clients including Microsoft Outlook, Yahoo! Mail, Google Gmail, and Mac Address Book. Inventory Management The software automatically adjusts inventory quantities after every purchase and sale. Users can track their current inventory quantity, average cost of inventory on-hand, cost of goods sold (COGS) and top-selling products. Users can also make manual adjustments to inventory when necessary. Financial Reporting Users can view a balance sheet, income statement, or cash flow statement pertaining to their business. The software automatically manages accruals to produce the balance sheet and income statement. Users can choose a data range from which to draw any of these reports. Financial reports can be converted to pdf format or exported (with formulas intact) to OpenOffice or Microsoft Excel. Cash Management WorkingPoint enables users to monitor cash balances on their bank accounts. The software automatically tracks cash inflows and outflows when users manage their accounts payable and accounts receivable. Business Dashboard The Business Dashboard visually and graphically displays key real-time business data. Users can customize the Dashboard to display data of their choosing. Online Company Profile Users can create an online company profile in order to have a presence on the Internet and as a basis for participation in WorkingPoint’s small business community features. Public profiles are featured in the WorkingPoint Company Directory and can be viewed externally using the URL format: https://businessname.workingpoint.com. == Product Description (Premium Version) == The premium version of WorkingPoint costs $10 per month. It includes all of the functionalities of the free version, allowing unlimited invoicing and account access. It also offers the following functions: 1099 Tax Reporting, invoice payment collection via PayPal, Email Marketing via VerticalResponse, and the Premium Reports & Accounting Package. 1099 Tax Reporting Users can identify qualifying companies and individuals for IRS Form 1099 or IRS Form 1096 reporting. WorkingPoint automatically tracks payments made to these companies and individuals. Users can then generate 1099 reports for distribution. Premium Reports & Accounting Package This includes: a Daily Operating Report providing users with sales and cash flow information, customizable accounts categorization, and cash flow statements using the indirect method of reporting. Invoice Payment Collection via PayPal Users can collect payment on their invoices via PayPal. Email Marketing via VerticalResponse The WorkingPoint premium package includes 500 email credits with the email marketing firm VerticalResponse.

  Read more →
• 

  Azure Maps

  Azure Maps is a suite of cloud-based, location-based services provided by Microsoft as part of the company's Azure platform. The platform provides geospatial and location-based services via REST APIs and software development kits (SDKs). The service is typically used to integrate maps or geospatial data into applications. Azure Maps differs from Microsoft's other enterprise mapping service, Bing Maps, in its pricing model, focus on privacy, and its level of integration into the broader Azure cloud ecosystem. == History == Azure Maps was first introduced in public preview mode under the name "Azure Location Based Services" in 2017, primarily as an enterprise solution. The services was intended to add mapping and location-based functionality onto the existing Azure cloud services suite, seen as a critical part of Microsoft's broader Internet-of-Things (IoT) strategy. The preview version included APIs which could be used to develop location aware apps for use cases such as logistics and mobility. In 2018, the software was renamed "Azure Maps," and became generally available to the public, and a number of new functions were added, including route calculation, travel time calculation, and incorporation of real-time traffic data and incident information. Azure Maps was integrated with Azure IoT Central in 2018, which added tracking, monitoring, and geofencing capabilities. A set of mobility APIs on were added in 2019, with applications such as use in public transport apps and shared bicycle fleet management. “Azure Maps Creator,” which converts private facility floor plans into indoor map data, was also introduced in 2019. Some commentators linked these services to Microsoft's broader development of augmented reality products. In 2020, Azure Maps Visual for Power BI was released, integrating location-based features and mapping capabilities into Microsoft's business intelligence software. An elevation API (which was later retired), geolocation services, and an iOS and Android software development kit were introduced in 2021. In 2022, support for historical weather, air quality, and tropical storm data was made generally available and custom styling for indoor maps was also introduced. In 2023, Azure Maps was certified as HIPAA compliant in a move to target healthcare and health insurance companies. == Functionality == === Geocoding === Geocoding is one of the core functionalities of Azure Maps, converting addresses or place names into geographic coordinates. Batch geocoding is used to process large amounts of address data, a function used for route optimization and spatial analysis. === Reverse geocoding === Reverse geocoding derives human-readable information from geographic coordinates like longitude and latitude, used in navigation and by geographic information systems. === Routing === Azure Maps uses map data and routing algorithms to calculate the shortest or fastest routes between locations based on factors like vehicle size and type, traffic conditions, and distance. Routing also supports multi-modal routing, which include multiple modes of transport in a single trip, including cycling, walking, and ferries. This functionality is used for location-based searches and route optimization in applications like fleet management, proximity marketing, and emergency services as well as logistics and delivery, urban planning, ride sharing apps, and outdoor activities. === Map visualization === The platform supports map visualizations that can be modified to reflect real-time data (including from IoT sensors) as well as historical data patterns. Visualizations include heat maps, street maps, satellite imagery and other custom data layers. Maps are rendered using raster or vector tiles which reduce the load of displaying large data sets or complex maps. This can be used in various applications in areas like transportation, smart cities, retail and marketing, public health, and environmental monitoring. For example, it can be used for tracking the spread of diseases or measuring the impact of changing climatic patterns. === Geofencing and spatial analytics === Azure Maps supports polygonal geofencing, which enables the definition of custom geographic boundaries. Geofenced areas can be monitored in real-time for events of interest. For example, an application could send an alert when equipment or persons enter or leave a defined area. Tools for analyzing historical geofencing data are also available via the APIs for optimization purposes. == Industry usage == Azure Maps' geofencing function has seen usage in the construction industry, designating hazardous areas for safety purposes and sending alerts if anyone enters the area. Private facility maps are used by construction companies for monitoring large construction sites to increase productivity and prevent accidents or damage. In emergency management, New Zealand based company Beca has used Azure Maps to provide analysis on the impact of earthquakes to users, including information on the severity and location of an earthquake and the impact on affected properties. Alaska's Department of Transportation uses Azure Maps as part of an information system providing weather-related warnings and analytics to road crews. Airmap, an airspace management platform for drones, uses Azure Maps. Azure Maps has also been used in conjunction with Azure Monitor for risk monitoring by an insurance company. Other companies that use or have used Azure Maps include BMW, Banco Santander, Jvion, MV Transportation, C.H. Robertson, Wise Skulls, Tata Consultancy Services, Providence Health and Services, Gas Brasiliano Distribuidora S.A., Shell plc, Persistent Systems, Phase 2 Dining and Entertainment, Symbio, HID, Globant, and Insight Enterprises. == Partnerships == Azure Maps and TomTom have been partners since 2016, and TomTom provides location data to Azure Maps and can process data from Azure Maps for mapping purposes. In 2021, Azure Maps partnered with AccuWeather to make climatic data available via its APIs, making weather data along all parts of calculated routes available for mobility and logistics purposes. Microsoft has partnered with Esri, the developer of ArcGIS, and there is cross-compatibility between Azure and ArcGIS so that data from Azure Maps can be integrated into ArcGIS and vice versa. Azure Maps partnered with Moovit in 2019, a startup providing software that interfaces with public transport data. Moovit's database on global public transit networks, including information on which stations and facilities are wheelchair accessible, was linked to Azure Maps. This service was noted for its use increasing accessibility to public transport for the visually impaired by means of voice activated route planning assistance. NORAD has used some Azure Maps functions for their NORAD Tracks Santa website during Christmas holidays. == Components == === REST APIs === Various APIs cover the major functionalities across Azure Maps: Data registry API Geolocation API Render API Route API Search API Spatial API Time zone API Traffic API Weather API === SDKs === Azure Maps SDKs uses MapLibre-style specifications and open source MapLibre GL-based libraries as a rendering engine. The Web SDK is used for developing web apps with maps and location-based data and functionality. It includes a map control module as well as modules with drawing tools. It also supports Azure Maps Creator and various spatial data formats. The platform also includes a set of REST SDKs for developers integrating Azure Maps REST APIs into Python, C#, Java or JavaScript applications. Azure Maps also includes Android and iOS SDKs used for developing applications for Android and Apple devices. === Azure Maps Creator === Azure Maps Creator is a tool for generating custom maps for locations like large office complexes, construction sites, or university campuses. These maps can then be integrated into applications and used with other Azure Maps functions for purposes such as wayfinding and maintenance and security in building automation contexts. === Azure Maps Visual for Power BI === Azure Maps is integrated with Microsoft Power BI, a graphical tool for producing data visualizations. Since July 2020, Power BI can be used in conjunction with Azure Maps for developing map-based data visualizations. This functionality entered general availability in May 2023.

  Read more →
• 

  Fatpaint

  Fatpaint is a free, online (web-based) graphic design and desktop publishing software product and image editor. It includes integrated tools for creating page layout, painting, coloring and editing pictures and photos, drawing vector images, using dingbat vector clipart, writing rich text, creating ray traced 3D text logos and displaying graphics on products from Zazzle that can be purchased or sold. Fatpaint integrates desktop publishing features with brush painting, vector drawing and custom printed products in a single Flash application. It supports the use of a pressure-sensitive pen tablet and allows the user to add images by searching Wikimedia, Picasa, Flickr, Google, Yahoo, Bing, and Fatpaint's own collection of public domain images. The completed project can be saved on Fatpaint's server or locally. Fatpaint is affiliated with Zazzle, and owned by Mersica (also the developer of MakeWebVideo). == History == Fatpaint was launched in May 2010, after five years of development by Danish-Brazilian software developer, Mario Gomes Cavalcanti. After his departure, he was involved in the development of two of Denmark's most visited websites and is responsible for developing and running Fatpaint. Partner Kenneth Christensen mastered assembler and graphics programming on the Amiga computer. He spent years with Mario on the Amiga demo scene. According to the CEO, Kenneth helped him with the Linux servers while he handled the development, administration, promotion, video production, testing and content. The founder of Fatpaint also created "Make Web Video" (or Video Maker), a web application for creating video presentations for business, families and individuals. Video Maker allows users to give out the videos for personal or business use in a simple and affordable way. == Tools == Fatpaint provides free online logo maker, graphic design, vector drawing, photo editor and paint design in English, Danish and Portuguese. === Photo Editor === Users can change photo colours by manipulating R, G, B and A channels, saturation, contrast, brightness, hue, gamma, sharpness, tint and RGBA matrix. Users can also remove unwanted background and other artifacts by using the paint tools with added effects or by cloning. Multiple photos can be combined into a single image. Users can pick different blend modes and multiple layers. Users can also extract or change parts of the photo by cropping, resizing, skewing, bending, distorting and rotating in 2D and 3D. Hence, users' graphics can be printed on custom products that can be bought and sold for personal and business purposes. === Vector Drawing === Users can choose from 5000 vector images or draw vector graphics and art from scratch, using Fatpaint's vector shape creation tools. It also provides advanced symmetric vector transformation in 2D and 3D, as well as support for colour gradients. Multiple drawings can be combined to form complex vector shapes. Different blend modes and effects are supported. Vector drawings can be cropped, resized, skewed, distorted and rotated in 2D and 3D. Similar to Fatpaint's photo editor, vector graphics can be displayed on custom printed products that can be purchased and sold by the users for personal or business uses. === Paint Design === Fatpaint has full support for Pen Tablets and users can pick pen, brush, airbrush, paint bucket, clone painting, eraser and smudging tools. Fatpaint offers 8 palettes for painting, plus 13 palettes when clone painting. Fatpaint allows users to import or create their own brushes and thousands of free clipart drawings and brush sets that have dynamic brushes, effects and blend modes. Paintings can be combined in different layers and objects. Similarly, paintings can be cropped, resized, skewed, bent, distorted and rotated in 2D and 3D. Moreover, the graphics can be displayed on custom printed products, which users can buy or sell for personal or business uses. == Top Features == 3D Text objects: Create photorealistic, ray-traced 3D text logos and images. Image objects: Paint on multiple layers, import or create your own brushes, clone painting, and painting with effects. Vector drawing objects: Create vector images using multiple paths. Rich text objects with 981 fonts. Effect objects: Blur, Drop Shadow, Glow, Gradient Glow, Bevel, Gradient Bevel, Color manipulations. Page layout: Create multiple pages with a size limit of 64 megapixels, and arrange graphical objects on created pages (each object can be up to 7.8 megapixels in size). Nest graphical objects and transform them into 2D and 3D. Skew, bend and distort images and text. Design, purchase and sell custom-printed products. Fatpaint can send the projects to a printing company. Supports pressure-sensitive pen tablets. Fonts, public domain images, cliparts, and brushes. == Compatibility == Fatpaint supports Firefox, Google Chrome, Opera, and Internet Explorer with cookies and JavaScript enabled. Other browsers may not work correctly due to their support of Java Applets. Fatpaint requires Adobe's Flash 10 or newer and Sun's Java 6 or newer. It is recommended to run on Windows 7 and on Apple and Linux if Java has been disabled. The editor only works on Firefox on Linux. Java and Flash integration do not work on Linux and Apple browsers. WikiMedia search is disabled on those browsers. Fatpaint works best with at least 2 GB RAM and 1 GB video memory, as well as a decent graphics card.

  Read more →
• 

  Language identification

  In natural language processing, language identification or language guessing is the problem of determining which natural language a given content is in. Computational approaches to this problem view it as a special case of text categorization, solved with various statistical methods. == Overview == === Logical approach === A common non-statistical intuitive approach (though highly uncertain) is to look for common letter combinations, or distinctive diacritics or punctuation. === Statistical approach === There are several statistical approaches to language identification. An older statistical method by Grefenstette was based on the frequency of short n-grams, which are often function morphemes. For example, "ing" is more common in English than in French, while the sequence "que" is more common in French. Given a new page found on the Web, one counts the number of occurrences of each such short sequence and picks the language whose frequency table it matches the most. One technique is to compare the compressibility of the text to the compressibility of texts in a set of known languages. This approach is known as mutual information based distance measure. The same technique can also be used to empirically construct family trees of languages which closely correspond to the trees constructed using historical methods. Mutual information based distance measure is essentially equivalent to more conventional model-based methods and is not generally considered to be either novel or better than simpler techniques. Another technique, as described by Cavnar and Trenkle (1994) and Dunning (1994) is to create a language n-gram model from a "training text" for each of the languages. These models can be based on characters (Cavnar and Trenkle) or encoded bytes (Dunning); in the latter, language identification and character encoding detection are integrated. Then, for any piece of text needing to be identified, a similar model is made, and that model is compared to each stored language model. The most likely language is the one with the model that is most similar to the model from the text needing to be identified. This approach can be problematic when the input text is in a language for which there is no model. In that case, the method may return another, "most similar" language as its result. Also problematic for any approach are pieces of input text that are composed of several languages, as is common on the Web. As of 2025, a commonly used baseline method is via the fastText library, which has comparable classification accuracy as deep learning techniques, but much faster. == Identifying similar languages == One of the great bottlenecks of language identification systems is to distinguish between closely related languages. Similar languages like Bulgarian and Macedonian or Indonesian and Malay present significant lexical and structural overlap, making it challenging for systems to discriminate between them. In 2014 the DSL shared task has been organized providing a dataset (Tan et al., 2014) containing 13 different languages (and language varieties) in six language groups: Group A (Bosnian, Croatian, Serbian), Group B (Indonesian, Malaysian), Group C (Czech, Slovak), Group D (Brazilian Portuguese, European Portuguese), Group E (Peninsular Spanish, Argentine Spanish), Group F (American English, British English). The best system reached performance of over 95% results (Goutte et al., 2014). Results of the DSL shared task are described in Zampieri et al. 2014. == Software == Apache OpenNLP includes char n-gram based statistical detector and comes with a model that can distinguish 103 languages Apache Tika contains a language detector for 18 languages

  Read more →
• 

  Systems development life cycle

  The systems development life cycle (SDLC) describes the typical phases and progression between phases during the development of a computer-based system. These phases progress from inception to retirement. At base, there is just one life cycle, but the taxonomy used to describe it may vary; the cycle may be classified into different numbers of phases and various names may be used for those phases. The SDLC is analogous to the life cycle of a living organism from its birth to its death. In particular, the SDLC varies by system in much the same way that each living organism has a unique path through its life. The SDLC does not prescribe how engineers should go about their work to move the system through its life cycle. Prescriptive techniques are referred to using various terms such as methodology, model, framework, and formal process. Other terms are used for the same concept as SDLC, including software development life cycle (also SDLC), application development life cycle (ADLC), and system design life cycle (also SDLC). These other terms focus on a different scope of development and are associated with different prescriptive techniques, but are about the same essential life cycle. The term "life cycle" is often written without a space, as "lifecycle", with the former more popular in the past and in non-engineering contexts. The acronym SDLC was coined when the longer form was more popular and has remained associated with the expansion, even though the shorter form is popular in engineering. Also, SDLC is relatively unique as opposed to the TLA SDL, which is highly overloaded. == Phases == Depending on the source, the SDLC is described as having different phases and using different terms. Even so, there are common aspects. The following attempts to describe notable phases using notable terminology. The phases are somewhat ordered by the natural sequence of development, although they can be overlapping and iterative. === Conceptualization === During conceptualization (a.k.a. conceptual design, system investigation, feasibility), options and priorities are considered. A feasibility study can determine whether the development effort is worthwhile via activities such as understanding user needs, cost estimation, benefit analysis, and resource analysis. A study should address operational, financial, technical, human factors, and legal/political concerns. === Requirements analysis === Requirements analysis (a.k.a. preliminary design) involves understanding the problem and determining what is needed. Often this involves engaging users to define the requirements and recording them in a document known as a requirements specification. === Design === During the design phase (a.k.a. detail design), a solution is planned. The plan can include relatively high-level information such as describing the major components of the system. The plan can include relatively low-level information such as describing functions, screen layout, business rules, and process flow. The design phase is informed by the requirements of the system. The design must satisfy each requirement. The design may be recorded in textual documents as well as functional hierarchy diagrams, example screen images, business rules, process diagrams, pseudo-code, and data models. === Construction === During construction (a.k.a. implementation, production), the system is realized. Based on the design, hardware and software components are created and integrated. This phase includes testing sub-components, components and the integration of some components, but typically does not include testing at the complete system level. This phase may include the development of training materials, including user manuals and help files. === Acceptance === The acceptance phase (a.k.a. system testing) is about testing the complete system to ensure that it meets customer expectations (requirements). === Deployment === The deployment phase (a.k.a. implementation) involves the logistics of delivery to the customer. Some systems are deployed as a single instance (i.e. in the cloud), and deployment may be ad hoc and manual. Some systems are built in quantity and are associated with manufacturing process and commissioning. This phase may include training users to use the system. It may include transitioning future development to support staff. === Maintenance === During the maintenance phase (a.k.a. operation, utilization, support) development is largely inactive, although this phase does include customer support for resolving user issues and recording suggestions for improvement. Fixes and enhancements are handled by returning to the first phase, conceptualization. For minor changes, the cycle may be significantly abbreviated compared to initial development. === Decommission === Decommission (a.k.a. disposition, retirement, phase-out) is when the system is removed from use, i.e., when it reaches end-of-life. == Practices == === Management and control === SDLC phase objectives are described in this section with key deliverables, a description of recommended tasks, and a summary of related control objectives for effective management. It is critical for the project manager to establish and monitor control objectives while executing projects. Control objectives are clear statements of the desired result or purpose and should be defined and monitored throughout a project. Control objectives can be grouped into major categories (domains), and relate to the SDLC phases as shown in the figure. To manage and control a substantial SDLC initiative, a work breakdown structure (WBS) captures and schedules the work. The WBS and all programmatic material should be kept in the "project description" section of the project notebook. The project manager chooses a WBS format that best describes the project. The diagram shows that coverage spans numerous phases of the SDLC, but the associated MCD (Management Control Domains) shows mappings to SDLC phases. For example, Analysis and Design is primarily performed as part of the Acquisition and Implementation Domain, and System Build and Prototype is primarily performed as part of delivery and support. === Work breakdown structured organization === The upper section of the WBS provides an overview of the project scope and timeline. It should also summarize the major phases and milestones. The middle section is based on the SDLC phases. WBS elements consist of milestones and tasks to be completed rather than activities to be undertaken, and have a deadline. Each task has a measurable output (e.g., an analysis document). A WBS task may rely on one or more activities (e.g., coding). Parts of the project needing support from contractors should have a statement of work (SOW). The development of an SOW does not occur during a specific phase of SDLC but is developed to include the work from the SDLC process that may be conducted by contractors. === Baselines === Baselines are established after four of the five phases of the SDLC, and are critical to the iterative nature of the model. Baselines become milestones. functional baseline: established after the conceptual design phase. allocated baseline: established after the preliminary design phase. product baseline: established after the detailed design and development phase. updated product baseline: established after the production construction phase. In the following diagram, these stages are divided into ten steps, from definition to creation and modification of IT work products:

  Read more →
• 

  ImHex

  ImHex is a free cross-platform hex editor available on Windows, macOS, and Linux. ImHex is used by programmers and reverse engineers to view and analyze binary data. == History == The initial release of the project in November 2020, saw significant interest on GitHub. == Features == Features include: Hex editor Custom pattern matching and analysis scripting language Visual, node based data pre-processor Disassembler Running and visualizing of YARA rules Bookmarks Binary data diffing Additional Tools MSVC, Itanium, D and Rust name demangler ASCII table Calculator Base converter File utilities IEEE 754 floating point decoder Division by invariant multiplication calculator TCP/IP client and server Support for: Data importing and exporting ASCII string, Unicode string, numeric, hexadecimal and regular expressions search Byte manipulation File hashing Plug-ins

  Read more →