AI Code Unlimited

AI Code Unlimited — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Multi-exposure HDR capture

In photography and videography, multi-exposure HDR capture is a technique that creates high dynamic range (HDR) images (or extended dynamic range images) by taking and combining multiple exposures of the same subject matter at different exposures. Combining multiple images in this way results in an image with a greater dynamic range than what would be possible by taking one single image. The technique can also be used to capture video by taking and combining multiple exposures for each frame of the video. The term "HDR" is used frequently to refer to the process of creating HDR images from multiple exposures. Many smartphones have an automated HDR feature that relies on computational imaging techniques to capture and combine multiple exposures. A single image captured by a camera provides a finite range of luminosity inherent to the medium, whether it is a digital sensor or film. Outside this range, tonal information is lost and no features are visible; tones that exceed the range are "burned out" and appear pure white in the brighter areas, while tones that fall below the range are "crushed" and appear pure black in the darker areas. The ratio between the maximum and the minimum tonal values that can be captured in a single image is known as the dynamic range. In photography, dynamic range is measured in exposure value (EV) differences, also known as stops. The human eye's response to light is non-linear: halving the light level does not halve the perceived brightness of a space, it makes it look only slightly dimmer. For most illumination levels, the response is approximately logarithmic. Human eyes adapt fairly rapidly to changes in light levels. HDR can thus produce images that look more like what a human sees when looking at the subject. This technique can be applied to produce images that preserve local contrast for a natural rendering, or exaggerate local contrast for artistic effect. HDR is useful for recording many real-world scenes containing a wider range of brightness than can be captured directly, typically both bright, direct sunlight and deep shadows. Due to the limitations of printing and display contrast, the extended dynamic range of HDR images must be compressed to the range that can be displayed. The method of rendering a high dynamic range image to a standard monitor or printing device is called tone mapping; it reduces the overall contrast of an HDR image to permit display on devices or prints with lower dynamic range. == Benefits == One aim of HDR is to present a similar range of luminance to that experienced through the human visual system. The human eye, through non-linear response, adaptation of the iris, and other methods, adjusts constantly to a broad range of luminance present in the environment. The brain continuously interprets this information so that a viewer can see in a wide range of light conditions. Most cameras are limited to a much narrower range of exposure values within a single image, due to the dynamic range of the capturing medium. With a limited dynamic range, tonal differences can be captured only within a certain range of brightness. Outside of this range, no details can be distinguished: when the tone being captured exceeds the range in bright areas, these tones appear as pure white, and when the tone being captured does not meet the minimum threshold, these tones appear as pure black. Images captured with non-HDR cameras that have a limited exposure range (low dynamic range, LDR), may lose detail in highlights or shadows. Modern CMOS image sensors have improved dynamic range and can often capture a wider range of tones in a single exposure reducing the need to perform multi-exposure HDR. Color film negatives and slides consist of multiple film layers that respond to light differently. Original film (especially negatives versus transparencies or slides) feature a very high dynamic range (in the order of 8 for negatives and 4 to 4.5 for positive transparencies). Multi-exposure HDR is used in photography and also in extreme dynamic range applications such as welding or automotive work. In security cameras the term "wide dynamic range" is used instead of HDR. === Limitations === A fast-moving subject, or camera movement between the multiple exposures, will generate a "ghost" effect or a staggered-blur strobe effect due to the merged images not being identical. Unless the subject is static and the camera mounted on a tripod there may be a tradeoff between extended dynamic range and sharpness. Sudden changes in the lighting conditions (strobed LED light) can also interfere with the desired results, by producing one or more HDR layers that do have the luminosity expected by an automated HDR system, though one might still be able to produce a reasonable HDR image manually in software by rearranging the image layers to merge in order of their actual luminosity. Because of the nonlinearity of some sensors image artifacts can be common. Camera characteristics such as gamma curves, sensor resolution, noise, photometric calibration and color calibration affect resulting high-dynamic-range images. == Process == High-dynamic-range photographs are generally composites of multiple standard dynamic range images, often captured using exposure bracketing. Afterwards, photo manipulation software merges the input files into a single HDR image, which is then also tone mapped in accordance with the limitations of the planned output or display. === Capturing multiple images (exposure bracketing) === Any camera that allows manual exposure control can perform multi-exposure HDR image capture, although one equipped with automatic exposure bracketing (AEB) facilitates the process. Some cameras have an AEB feature that spans a far greater dynamic range than others, from ±0.6 in simpler cameras to ±18 EV in top professional cameras, as of 2020. The exposure value (EV) refers to the amount of light applied to the light-sensitive detector, whether film or digital sensor such as a CCD. An increase or decrease of one stop is defined as a doubling or halving of the amount of light captured. Revealing detail in the darkest of shadows requires an increased EV, while preserving detail in very bright situations requires very low EVs. EV is controlled using one of two photographic controls: varying either the size of the aperture or the exposure time. A set of images with multiple EVs intended for HDR processing should be captured only by altering the exposure time; altering the aperture size also would affect the depth of field and so the resultant multiple images would be quite different, preventing their final combination into a single HDR image. Multi-exposure HDR photography generally is limited to still scenes because any movement between successive images will impede or prevent success in combining them afterward. Also, because the photographer must capture three or more images to obtain the desired luminance range, taking such a full set of images takes extra time. Photographers have developed calculation methods and techniques to partially overcome these problems, but the use of a sturdy tripod is advised to minimize framing differences between exposures. === Merging the images into an HDR image === Tonal information and details from shadow areas can be recovered from images that are deliberately overexposed (i.e., with positive EV compared to the correct scene exposure), while similar tonal information from highlight areas can be recovered from images that are deliberately underexposed (negative EV). The process of selecting and extracting shadow and highlight information from these over/underexposed images and then combining them with image(s) that are exposed correctly for the overall scene is known as exposure fusion. Exposure fusion can be performed manually, relying on the HDR operator's judgment, experience, and training, but usually, fusion is performed automatically by software. === Storing === Information stored in high-dynamic-range images typically corresponds to the physical values of luminance or radiance that can be observed in the real world. This is different from traditional digital images, which represent colors as they should appear on a monitor or a paper print. Therefore, HDR image formats are often called scene-referred, in contrast to traditional digital images, which are device-referred or output-referred. Furthermore, traditional images are usually encoded for the human visual system (maximizing the visual information stored in the fixed number of bits), which is usually called gamma encoding or gamma correction. The values stored for HDR images are often gamma compressed using mathematical functions such as power laws logarithms, or floating point linear values, since fixed-point linear encodings are increasingly inefficient over higher dynamic ranges. HDR images often do not use fixed ranges per color channel, other than traditional images, to represent many more colors over a much wi
Read more →
Multifactor dimensionality reduction

Multifactor dimensionality reduction (MDR) is a statistical approach, also used in machine learning automatic approaches, for detecting and characterizing combinations of attributes or independent variables that interact to influence a dependent or class variable. MDR was designed specifically to identify nonadditive interactions among discrete variables that influence a binary outcome and is considered a nonparametric and model-free alternative to traditional statistical methods such as logistic regression. The basis of the MDR method is a constructive induction or feature engineering algorithm that converts two or more variables or attributes to a single attribute. This process of constructing a new attribute changes the representation space of the data. The end goal is to create or discover a representation that facilitates the detection of nonlinear or nonadditive interactions among the attributes such that prediction of the class variable is improved over that of the original representation of the data. == Illustrative example == Consider the following simple example using the exclusive OR (XOR) function. XOR is a logical operator that is commonly used in data mining and machine learning as an example of a function that is not linearly separable. The table below represents a simple dataset where the relationship between the attributes (X1 and X2) and the class variable (Y) is defined by the XOR function such that Y = X1 XOR X2. Table 1 A machine learning algorithm would need to discover or approximate the XOR function in order to accurately predict Y using information about X1 and X2. An alternative strategy would be to first change the representation of the data using constructive induction to facilitate predictive modeling. The MDR algorithm would change the representation of the data (X1 and X2) in the following manner. MDR starts by selecting two attributes. In this simple example, X1 and X2 are selected. Each combination of values for X1 and X2 are examined and the number of times Y=1 and/or Y=0 is counted. In this simple example, Y=1 occurs zero times and Y=0 occurs once for the combination of X1=0 and X2=0. With MDR, the ratio of these counts is computed and compared to a fixed threshold. Here, the ratio of counts is 0/1 which is less than our fixed threshold of 1. Since 0/1 < 1 we encode a new attribute (Z) as a 0. When the ratio is greater than one we encode Z as a 1. This process is repeated for all unique combinations of values for X1 and X2. Table 2 illustrates our new transformation of the data. Table 2 The machine learning algorithm now has much less work to do to find a good predictive function. In fact, in this very simple example, the function Y = Z has a classification accuracy of 1. A nice feature of constructive induction methods such as MDR is the ability to use any data mining or machine learning method to analyze the new representation of the data. Decision trees, neural networks, or a naive Bayes classifier could be used in combination with measures of model quality such as balanced accuracy and mutual information. == Machine learning with MDR == As illustrated above, the basic constructive induction algorithm in MDR is very simple. However, its implementation for mining patterns from real data can be computationally complex. As with any machine learning algorithm there is always concern about overfitting. That is, machine learning algorithms are good at finding patterns in completely random data. It is often difficult to determine whether a reported pattern is an important signal or just chance. One approach is to estimate the generalizability of a model to independent datasets using methods such as cross-validation. Models that describe random data typically don't generalize. Another approach is to generate many random permutations of the data to see what the data mining algorithm finds when given the chance to overfit. Permutation testing makes it possible to generate an empirical p-value for the result. Replication in independent data may also provide evidence for an MDR model but can be sensitive to difference in the data sets. These approaches have all been shown to be useful for choosing and evaluating MDR models. An important step in a machine learning exercise is interpretation. Several approaches have been used with MDR including entropy analysis and pathway analysis. Tips and approaches for using MDR to model gene-gene interactions have been reviewed. == Extensions to MDR == Numerous extensions to MDR have been introduced. These include family-based methods, fuzzy methods, covariate adjustment, odds ratios, risk scores, survival methods, robust methods, methods for quantitative traits, and many others. == Applications of MDR == MDR has mostly been applied to detecting gene-gene interactions or epistasis in genetic studies of common human diseases such as atrial fibrillation, autism, bladder cancer, breast cancer, cardiovascular disease, hypertension, obesity, pancreatic cancer, prostate cancer and tuberculosis. It has also been applied to other biomedical problems such as the genetic analysis of pharmacology outcomes. A central challenge is the scaling of MDR to big data such as that from genome-wide association studies (GWAS). Several approaches have been used. One approach is to filter the features prior to MDR analysis. This can be done using biological knowledge through tools such as BioFilter. It can also be done using computational tools such as ReliefF. Another approach is to use stochastic search algorithms such as genetic programming to explore the search space of feature combinations. Yet another approach is a brute-force search using high-performance computing. == Implementations == www.epistasis.org provides an open-source and freely-available MDR software package. An R package for MDR. An sklearn-compatible Python implementation. An R package for Model-Based MDR. MDR in Weka. Generalized MDR.
Read more →
Kernel principal component analysis

In the field of multivariate statistics, kernel principal component analysis (kernel PCA) is an extension of principal component analysis (PCA) using techniques of kernel methods. Using a kernel, the originally linear operations of PCA are performed in a reproducing kernel Hilbert space. == Background: Linear PCA == Recall that conventional PCA operates on zero-centered data; that is, 1 N ∑ i = 1 N x i = 0 {\displaystyle {\frac {1}{N}}\sum _{i=1}^{N}\mathbf {x} _{i}=\mathbf {0} } , where x i {\displaystyle \mathbf {x} _{i}} is one of the N {\displaystyle N} multivariate observations. It operates by diagonalizing the covariance matrix, C = 1 N ∑ i = 1 N x i x i ⊤ {\displaystyle C={\frac {1}{N}}\sum _{i=1}^{N}\mathbf {x} _{i}\mathbf {x} _{i}^{\top }} in other words, it gives an eigendecomposition of the covariance matrix: λ v = C v {\displaystyle \lambda \mathbf {v} =C\mathbf {v} } which can be rewritten as λ x i ⊤ v = x i ⊤ C v for i = 1 , … , N {\displaystyle \lambda \mathbf {x} _{i}^{\top }\mathbf {v} =\mathbf {x} _{i}^{\top }C\mathbf {v} \quad {\textrm {for}}~i=1,\ldots ,N} . (See also: Covariance matrix as a linear operator) == Introduction of the Kernel to PCA == To understand the utility of kernel PCA, particularly for clustering, observe that, while N points cannot, in general, be linearly separated in d < N {\displaystyle d Read more →
Synaptic transistor

A synaptic transistor is an electrical device that can learn in ways similar to a neural synapse. It optimizes its own properties for the functions it has carried out in the past. The device mimics the behavior of the property of neurons called spike-timing-dependent plasticity, or STDP. == Structure == Its structure is similar to that of a field effect transistor, where an ionic liquid takes the place of the gate insulating layer between the gate electrode and the conducting channel. That channel is composed of samarium nickelate (SmNiO3, or SNO) rather than the field effect transistor's doped silicon. == Function == A synaptic transistor has a traditional immediate response whose amount of current that passes between the source and drain contacts varies with voltage applied to the gate electrode. It also produces a much slower learned response such that the conductivity of the SNO layer varies in response to the transistor's STDP history, essentially by shuttling oxygen ions between the SNO and the ionic liquid. The analog of strengthening a synapse is to increase the SNO's conductivity, which essentially increases gain. Similarly, weakening a synapse is analogous to decreasing the SNO's conductivity, lowering the gain. The input and output of the synaptic transistor are continuous analog values, rather than digital on-off signals. While the physical structure of the device has the potential to learn from history, it contains no way to bias the transistor to control the memory effect. An external supervisory circuit converts the time delay between input and output into a voltage applied to the ionic liquid that either drives ions into the SNO or removes them. A network of such devices can learn particular responses to "sensory inputs", with those responses being learned through experience rather than explicitly programmed.
Read more →
AI Overviews

AI Overviews is an artificial intelligence (AI) feature integrated into Google Search that produces AI-generated summaries of search results. The feature has been criticized for its inaccuracy and for reducing website traffic. == History and development == AI Overviews were first introduced as part of Google's Search Generative Experience (SGE), which was unveiled at the Google I/O conference in May 2023. In May 2024 at Google I/O 2024, the feature was rebranded as AI Overviews and launched in the United States. The introduction of AI Overviews was seen as a strategic move to compete with other generative AI advancements, including OpenAI's ChatGPT. By August 2024, AI Overviews was rolled out to several other countries, including the United Kingdom, India, Japan, Brazil, Mexico, and Indonesia, with support for multiple languages. In October 2024, Google expanded the feature globally, making it available in over 100 countries. In December 2024, Botify x Demandsphere released findings stating that when AI Overviews and featured snippets appear together on the search engine results page, they take up approximately 67.1% of the screen on desktop and 75.7% on mobile. Even if content is ranking in the #1 position, it may not be visible to consumers if other visual elements on the results page are more prominent. In March 2025, Google started testing an "AI Mode", where the search results page is AI-generated. The company was also considering adding advertisements to the AI Mode, as they already exist in AI Overviews. As of May 2025, AI Overviews are available in over 200 countries and territories and in more than 40 languages. As of March 2026, Google AI Overviews appear on more than 48% of total Google Search queries, compared to just 6.49% in the previous year (58% year-over-year growth). == Functionality == The AI Overviews feature uses large language models to generate summaries from web content. The overviews are designed to be concise, providing a snapshot of relevant information about the queried topic. Google allows users to adjust the language complexity in summaries, offering both simplified and detailed options. The overviews also include links to sources. According to a June 2025 study by Semrush, the most cited source is Quora, followed by Reddit. == Reception == The feature has faced criticism for inaccuracies, including instances where erroneous or nonsensical content was generated. Depending on what is searched for, the overview may also consist of hallucinated content, such as when searching for idioms that do not exist. In May 2024, Google temporarily restricted the AI tool after it provided suggestions that were seen as nonsensical and harmful, such as telling users to eat rocks or apply glue on pizza. Concerns were also raised by content publishers, who feared a decline in web traffic as users relied on the summaries instead of visiting source websites. A Google patent from 2026 raised the concern of webmasters that Google could entirely replace the landing page of websites by an AI optimized copy of the website in its results. There is also apprehension about the ethical implications of AI-driven content aggregation, including its impact on intellectual property rights and the visibility of smaller content providers. The European Commission announced in December 2025 that they were investigating whether AI Overviews breached European competition law. In response, Google has stated its commitment to improve content validation and refine the algorithms used to filter unreliable information. Google implemented measures to prioritize link placement within AI Overviews, aiming to balance user convenience with the needs of content creators. In January 2026, Google restricted AI Overviews on certain health-related searches following an investigation by The Guardian. == Lawsuits == On February 24, 2025, Chegg sued Alphabet over the AI Overviews feature, claiming that it was leading to students preferring "low-quality, unverified AI summaries", thus violating antitrust law. Chegg also said it was considering either a sale or a take-private transaction. In September 2025, Penske Media Corporation, the publisher of Rolling Stone and The Hollywood Reporter, sued Google, claiming that AI Overviews illegally regurgitate content from their websites and drive off potential site visitors by always appearing on top of the search results while leaving little incentive to see the linked sources. The company stated that "the future of digital media and [...] its integrity [...] is threatened by Google's current actions", alleging that 20% of searches that link to Penske-owned websites show AI Overviews and that the figure is expected to rise. Google spokesperson José Castañeda called the claims "meritless" and stated that "AI Overviews send traffic to a greater diversity of sites." In 2026, Canadian musician Ashley MacIsaac filed a lawsuit against Google claiming that the AI Overview feature had wrongly stated that MacIsaac had been convicted of numerous criminal offences and was on the sex offender registry. He claims this incorrect information led to the cancellation of a December 2025 gig organized by the Sipekne'katik First Nation.
Read more →
Probit model

In statistics, a probit model is a type of regression where the dependent variable can take only two values, for example married or not married. The word is a portmanteau, coming from probability + unit. The purpose of the model is to estimate the probability that an observation with particular characteristics will fall into a specific one of the categories; moreover, classifying observations based on their predicted probabilities is a type of binary classification model. A probit model is a popular specification for a binary response model. As such it treats the same set of problems as does logistic regression using similar techniques. When viewed in the generalized linear model framework, the probit model employs a probit link function. It is most often estimated using the maximum likelihood procedure, such an estimation being called a probit regression. == Conceptual framework == Suppose a response variable Y is binary, that is it can have only two possible outcomes which we will denote as 1 and 0. For example, Y may represent presence/absence of a certain condition, success/failure of some device, answer yes/no on a survey, etc. We also have a vector of regressors X, which are assumed to influence the outcome Y. Specifically, we assume that the model takes the form P ( Y = 1 ∣ X ) = Φ ( X T β ) , {\displaystyle P(Y=1\mid X)=\Phi (X^{\operatorname {T} }\beta ),} where P is the probability and Φ {\displaystyle \Phi } is the cumulative distribution function (CDF) of the standard normal distribution. The parameters β are typically estimated by maximum likelihood. It is possible to motivate the probit model as a latent variable model. Suppose there exists an auxiliary random variable Y ∗ = X T β + ε , {\displaystyle Y^{\ast }=X^{T}\beta +\varepsilon ,} where ε ~ N(0, 1). Then Y can be viewed as an indicator for whether this latent variable is positive: Y = { 1 Y ∗ > 0 0 otherwise } = { 1 X T β + ε > 0 0 otherwise } {\displaystyle Y=\left.{\begin{cases}1&Y^{}>0\\0&{\text{otherwise}}\end{cases}}\right\}=\left.{\begin{cases}1&X^{\operatorname {T} }\beta +\varepsilon >0\\0&{\text{otherwise}}\end{cases}}\right\}} The use of the standard normal distribution causes no loss of generality compared with the use of a normal distribution with an arbitrary mean and standard deviation, because adding a fixed amount to the mean can be compensated by subtracting the same amount from the intercept, and multiplying the standard deviation by a fixed amount can be compensated by multiplying the weights by the same amount. To see that the two models are equivalent, note that P ( Y = 1 ∣ X ) = P ( Y ∗ > 0 ) = P ( X T β + ε > 0 ) = P ( ε > − X T β ) = P ( ε < X T β ) by symmetry of the normal distribution = Φ ( X T β ) {\displaystyle {\begin{aligned}P(Y=1\mid X)&=P(Y^{\ast }>0)\\&=P(X^{\operatorname {T} }\beta +\varepsilon >0)\\&=P(\varepsilon >-X^{\operatorname {T} }\beta )\\&=P(\varepsilon 0 {\displaystyle t,\lim _{n\rightarrow \infty }n_{t}/n=c_{t}>0} . Denote p ^ t = r t / n t {\displaystyle {\hat {p}}_{t}=r_{t}/n_{t}} σ ^ t 2 = 1 n t p ^ t ( 1 − p ^ t ) φ 2 ( Φ − 1 ( p ^ t ) ) {\displaystyle {\hat {\sigma }}_{t}^{2}={\frac {1}{n_{t}}}{\frac {{\hat {p}}_{t}(1-{\hat {p}}_{t})}{\varphi ^{2}{\big (}\Phi ^{-1}({\hat {p}}_{t}){\big )}}}} Then Berkson's minimum chi-square estimator is a generalized least squares estimator in a regression of Φ − 1 ( p ^ t ) {\displaystyle \Phi ^{-1}({\hat {p}}_{t})} on x ( t ) {\displaystyle x_{(t)}} with weights σ ^ t − 2 {\displaystyle {\hat {\sigma }}_{t}^{-2}} : β ^ = ( ∑ t = 1 T σ ^ t − 2 x ( t ) x ( t ) T ) − 1 ∑ t = 1 T σ ^ t − 2 x ( t ) Φ − 1 ( p ^ t ) {\displaystyle {\hat {\beta }}={\Bigg (}\sum _{t=1}^{T}{\hat {\sigma }}_{t}^{-2}x_{(t)}x_{(t)}^{\operatorname {T} }{\Bigg )}^{-1}\sum _{t=1}^{T}{\hat {\sigma }}_{t}^{-2}x_{(t)}\Phi ^{-1}({\hat {p}}_{t})} It can be shown that this estimator is consistent (as n→∞ and T fixed), asymptotically normal and efficient. Its advantage is the presence of a closed-form formula for the estimator. However, it is only meaningful to carry out this analysis when individual observations are not available, only their aggregated counts r t {\displaystyle r_{t}} , n t {\disp
Read more →
Winner-take-all (computing)

Winner-take-all is a computational principle applied in computational models of neural networks by which neurons compete with each other for activation. In the classical form, only the neuron with the highest activation stays active while all other neurons shut down; however, other variations allow more than one neuron to be active, for example the soft winner take-all, by which a power function is applied to the neurons. == Neural networks == In the theory of artificial neural networks, winner-take-all networks are a case of competitive learning in recurrent neural networks. Output nodes in the network mutually inhibit each other, while simultaneously activating themselves through reflexive connections. After some time, only one node in the output layer will be active, namely the one corresponding to the strongest input. Thus the network uses nonlinear inhibition to pick out the largest of a set of inputs. Winner-take-all is a general computational primitive that can be implemented using different types of neural network models, including both continuous-time and spiking networks. Winner-take-all networks are commonly used in computational models of the brain, particularly for distributed decision-making or action selection in the cortex. Important examples include hierarchical models of vision, and models of selective attention and recognition. They are also common in artificial neural networks and neuromorphic analog VLSI circuits. It has been formally proven that the winner-take-all operation is computationally powerful compared to other nonlinear operations, such as thresholding. In many practical cases, there is not only one single neuron which becomes active but there are exactly k neurons which become active for a fixed number k. This principle is referred to as k-winners-take-all. === Example algorithm === Consider a single linear neuron, with inputs x 1 , … , x n {\displaystyle x_{1},\dots ,x_{n}} . Each input has weight w i {\displaystyle w_{i}} , and the output of the neuron is ∑ i w i x i {\displaystyle \sum _{i}w_{i}x_{i}} . In the Instar learning rule, on each input vector, the weight vectors are modified according to Δ w i = η ( x i − w i ) {\displaystyle \Delta w_{i}=\eta (x_{i}-w_{i})} where η {\displaystyle \eta } is the learning rate. This rule is unsupervised, since we need just the input vector, not a reference output. Now, consider multiple linear neurons y 1 , … , y m {\displaystyle y_{1},\dots ,y_{m}} . The output of each satisfies y i = ∑ j w i j x j {\displaystyle y_{i}=\sum _{j}w_{ij}x_{j}} . In the winner-take-all algorithm, the weights are modified as follows. Given an input vector x {\displaystyle x} , each output is computed. The neuron with the largest output is selected, and the weights going into that neuron are modified according to the Instar learning rule. All other weights remain unchanged. The k-winners-take-all rule is similar, except that the Instar learning rule is applied to the weights going into the k neurons with the largest outputs. == Circuit example == A simple, but popular CMOS winner-take-all circuit is shown on the right. This circuit was originally proposed by Lazzaro et al. (1989) using MOS transistors biased to operate in the weak-inversion or subthreshold regime. In the particular case shown there are only two inputs (IIN,1 and IIN,2), but the circuit can be easily extended to multiple inputs in a straightforward way. It operates on continuous-time input signals (currents) in parallel, using only two transistors per input. In addition, the bias current IBIAS is set by a single global transistor that is common to all the inputs. The largest of the input currents sets the common potential VC. As a result, the corresponding output carries almost all the bias current, while the other outputs have currents that are close to zero. Thus, the circuit selects the larger of the two input currents, i.e., if IIN,1 > IIN,2, we get IOUT,1 = IBIAS and IOUT,2 = 0. Similarly, if IIN,2 > IIN,1, we get IOUT,1 = 0 and IOUT,2 = IBIAS. A SPICE-based DC simulation of the CMOS winner-take-all circuit in the two-input case is shown on the right. As shown in the top subplot, the input IIN,1 was fixed at 6nA, while IIN,2 was linearly increased from 0 to 10nA. The bottom subplot shows the two output currents. As expected, the output corresponding to the larger of the two inputs carries the entire bias current (10nA in this case), forcing the other output current nearly to zero. == Other uses == In stereo matching algorithms, following the taxonomy proposed by Scharstein and Szelliski, winner-take-all is a local method for disparity computation. Adopting a winner-take-all strategy, the disparity associated with the minimum or maximum cost value is selected at each pixel. It is axiomatic that in the electronic commerce market, early dominant players such as AOL or Yahoo! get most of the rewards. By 1998, one study found the top 5% of all web sites garnered more than 74% of all traffic. The winner-take-all hypothesis in economics suggests that once a technology or a firm gets ahead, it will do better and better over time, whereas lagging technology and firms will fall further behind. See First-mover advantage.
Read more →
Blockmodeling

Blockmodeling is a set or a coherent framework, that is used for analyzing social structure and also for setting procedure(s) for partitioning (clustering) social network's units (nodes, vertices, actors), based on specific patterns, which form a distinctive structure through interconnectivity. It is primarily used in statistics, machine learning and network science. As an empirical procedure, blockmodeling assumes that all the units in a specific network can be grouped together to such extent to which they are equivalent. Regarding equivalency, it can be structural, regular or generalized. Using blockmodeling, a network can be analyzed using newly created blockmodels, which transforms large and complex network into a smaller and more comprehensible one. At the same time, the blockmodeling is used to operationalize social roles. While some contend that the blockmodeling is just clustering methods, Bonacich and McConaghy state that "it is a theoretically grounded and algebraic approach to the analysis of the structure of relations". Blockmodeling's unique ability lies in the fact that it considers the structure not just as a set of direct relations, but also takes into account all other possible compound relations that are based on the direct ones. The principles of blockmodeling were first introduced by Francois Lorrain and Harrison C. White in 1971. Blockmodeling is considered as "an important set of network analytic tools" as it deals with delineation of role structures (the well-defined places in social structures, also known as positions) and the discerning the fundamental structure of social networks. According to Batagelj, the primary "goal of blockmodeling is to reduce a large, potentially incoherent network to a smaller comprehensible structure that can be interpreted more readily". Blockmodeling was at first used for analysis in sociometry and psychometrics, but has now spread also to other sciences. == Definition == A network as a system is composed of (or defined by) two different sets: one set of units (nodes, vertices, actors) and one set of links between the units. Using both sets, it is possible to create a graph, describing the structure of the network. During blockmodeling, the researcher is faced with two problems: how to partition the units (e.g., how to determine the clusters (or classes), that then form vertices in a blockmodel) and then how to determine the links in the blockmodel (and at the same time the values of these links). In the social sciences, the networks are usually social networks, composed of several individuals (units) and selected social relationships among them (links). Real-world networks can be large and complex; blockmodeling is used to simplify them into smaller structures that can be easier to interpret. Specifically, blockmodeling partitions the units into clusters and then determines the ties among the clusters. At the same time, blockmodeling can be used to explain the social roles existing in the network, as it is assumed that the created cluster of units mimics (or is closely associated with) the units' social roles. Blockmodeling can thus be defined as a set of approaches for partitioning units into clusters (also known as positions) and links into blocks, which are further defined by the newly obtained clusters. A block (also blockmodel) is defined as a submatrix, that shows interconnectivity (links) between nodes, present in the same or different clusters. Each of these positions in the cluster is defined by a set of (in)direct ties to and from other social positions. These links (connections) can be directed or undirected; there can be multiple links between the same pair of objects or they can have weights on them. If there are not any multiple links in a network, it is called a simple network. A matrix representation of a graph is composed of ordered units, in rows and columns, based on their names. The ordered units with similar patterns of links are partitioned together in the same clusters. Clusters are then arranged together so that units from the same clusters are placed next to each other, thus preserving interconnectivity. In the next step, the units (from the same clusters) are transformed into a blockmodel. With this, several blockmodels are usually formed, one being core cluster and others being cohesive; a core cluster is always connected to cohesive ones, while cohesive ones cannot be linked together. Clustering of nodes is based on the equivalence, such as structural and regular. The primary objective of the matrix form is to visually present relations between the persons included in the cluster. These ties are coded dichotomously (as present or absent), and the rows in the matrix form indicate the source of the ties, while the columns represent the destination of the ties. Equivalence can have two basic approaches: the equivalent units have the same connection pattern to the same neighbors or these units have same or similar connection pattern to different neighbors. If the units are connected to the rest of network in identical ways, then they are structurally equivalent. Units can also be regularly equivalent, when they are equivalently connected to equivalent others. With blockmodeling, it is necessary to consider the issue of results being affected by measurement errors in the initial stage of acquiring the data. == Different approaches == Regarding what kind of network is undergoing blockmodeling, a different approach is necessary. Networks can be one–mode or two–mode. In the former all units can be connected to any other unit and where units are of the same type, while in the latter the units are connected only to the unit(s) of a different type. Regarding relationships between units, they can be single–relational or multi–relational networks. Further more, the networks can be temporal or multilevel and also binary (only 0 and 1) or signed (allowing negative ties)/values (other values are possible) networks. Different approaches to blockmodeling can be grouped into two main classes: deterministic blockmodeling and stochastic blockmodeling approaches. Deterministic blockmodeling is then further divided into direct and indirect blockmodeling approaches. Among direct blockmodeling approaches are: structural equivalence and regular equivalence. Structural equivalence is a state, when units are connected to the rest of the network in an identical way(s), while regular equivalence occurs when units are equally related to equivalent others (units are not necessarily sharing neighbors, but have neighbour that are themselves similar). Indirect blockmodeling approaches, where partitioning is dealt with as a traditional cluster analysis problem (measuring (dis)similarity results in a (dis)similarity matrix), are: conventional blockmodeling, generalized blockmodeling: generalized blockmodeling of binary networks, generalized blockmodeling of valued networks and generalized homogeneity blockmodeling, prespecified blockmodeling. According to Brusco and Steinley (2011), the blockmodeling can be categorized (using a number of dimensions): deterministic or stochastic blockmodeling, one–mode or two–mode networks, signed or unsigned networks, exploratory or confirmatory blockmodeling. == Blockmodels == Blockmodels (sometimes also block models) are structures in which: vertices (e.g., units, nodes) are assembled within a cluster, with each cluster identified as a vertex; from such vertices a graph can be constructed; combinations of all the links (ties), represented in a block as a single link between positions, while at the same time constructing one tie for each block. In a case, when there are no ties in a block, there will be no ties between the two positions that define the block. Computer programs can partition the social network according to pre-set conditions. When empirical blocks can be reasonably approximated in terms of ideal blocks, such blockmodels can be reduced to a blockimage, which is a representation of the original network, capturing its underlying 'functional anatomy'. Thus, blockmodels can "permit the data to characterize their own structure", and at the same time not seek to manifest a preconceived structure imposed by the researcher. Blockmodels can be created indirectly or directly, based on the construction of the criterion function. Indirect construction refers to a function, based on "compatible (dis)similarity measure between paris of units", while the direct construction is "a function measuring the fit of real blocks induced by a given clustering to the corresponding ideal blocks with perfect relations within each cluster and between clusters according to the considered types of connections (equivalence)". === Types === Blockmodels can be specified regarding the intuition, substance or the insight into the nature of the studied network; this can result in such models as follows: parent-child role systems, organizational hierarchies, systems of
Read more →
Josh (app)

Josh (stylized as JOSH) was a video-sharing social networking service but it has since evolved into a live call and chat application owned by VerSe Innovation – an Indian technology company based in Bangalore, India. Josh was an Indian short video app that was launched in immediately after the Indian Government banned TikTok and other Chinese apps in June 2020. The founders of the platform have promoted the app as the “Instagram for Bharat” referring to their focus on the Indian audience that speaks its own regional and state languages. Josh was among the top 10 most downloaded apps social and entertainment apps in India of 2021 and had 150 million monthly active users as per April 2022. The word 'Josh' translates to fervour or passion. The app was launched under the aegis of the Atmanirbhar Bharat campaign and to compete with the duopoly of Google and Facebook in India. Josh's parent company VerSe Innovations Pvt. Ltd. owns another startup Dailyhunt, which a content and news aggregator application. Both Dailyhunt and Josh are a part of the VerSe's focus on the "next billion" regional language users of India. Founders Virendra Gupta and Umang Bedi conceptualised Josh as a short-video platform that made content creation accessible to vernacular language users, essentially the non-English speaking audience in India. == Features == Josh is currently available in 12 Indian languages and allows users to upload, share, remix bite-sized videos of up to 120 seconds. There are various categories across the video section including viral, trending, glamour, dance, devotion, yoga and cooking among others. Similar to Instagram and TikTok, it has a video feed which is curated for individuals on the basis of their app behaviour. The app hosts many daily, weekly and monthly social media challenges. == Funding == In December 2020, within 3 months of its launch, Josh's parent app VerSe Innovation raised more than $100 million from investors including Alphabet Inc's Google and Microsoft. In February 2021, VerSe Innovation raised $100 million in Series H funding from Qatar Investment Authority, the sovereign wealth fund of the State of Qatar, and Glade Brook Capital Partners. In August 2021, VerSe raised over $450 million in its Series I financing round with a valuation of $1 billion. Investors included Canada Pension Plan Investment Board (CPPIB), Siguler Guff, Baillie Gifford, Carlyle Asia Partners Growth II affiliates, and others. The startup announced its plan to expand overseas and broaden its ecommerce play for both Dailyhunt and Josh. In April 2022, VerSe announced that it has raised $805 million in funding from investors at a valuation of nearly $5 billion. ByteDance Offloads Stake In Josh Parent VerSe, Exits At 56% Discount == Partnerships == In February 2021, Saregama and Josh signed a music licensing deal, wherein Josh expanded its musical library with 1.3 lakh songs from Saregama in 25 different languages. To improve their user experience, Josh partnered with computer vision company D-ID in August 2021. The company helped Josh introduce photo-to-video features, live portrait technology, animate their photos etc. In order to solidify their efforts in enhancing Josh, VerSe acquired Indian social networking platform GolBol in October 2021. The move came as an effort by the startup to strengthen their discovery initiatives on the platform and classify content at scale and understand the core behaviour of Indian regional audiences. Josh has also announced its plans to include live commerce as a potential revenue stream through its partnership with multiple large e-commerce players. == Notable campaigns == Say No To Dowry – In association with Josh, the Kerala Police partook in the #SayNo2Dowry online social media campaign that was started to highlight and stop the social evil in the state. Salute India – Josh entered the Guinness World Records by creating the largest online video album of people saluting (29,529). It organised an online campaign #SaluteIndia on the app during the 75th Independence Day of India during 10–15 August 2021.
Read more →
Bayesian hierarchical modeling

Bayesian hierarchical modelling is a statistical model written in multiple levels (hierarchical form) that estimates the posterior distribution of model parameters using the Bayesian method. The sub-models combine to form the hierarchical model, and Bayes' theorem is used to integrate them with the observed data and account for all the uncertainty that is present. This integration enables calculation of updated posterior over the (hyper)parameters, effectively updating prior beliefs in light of the observed data. Frequentist statistics may yield conclusions seemingly incompatible with those offered by Bayesian statistics due to the Bayesian treatment of the parameters as random variables and its use of subjective information in establishing assumptions on these parameters. As the approaches answer different questions the formal results are not technically contradictory but the two approaches disagree over which answer is relevant to particular applications. Bayesians argue that relevant information regarding decision-making and updating beliefs cannot be ignored and that hierarchical modeling has the potential to overrule classical methods in applications where respondents give multiple observational data. Moreover, the model has proven to be robust, with the posterior distribution less sensitive to the more flexible hierarchical priors. Hierarchical modeling, as its name implies, retains nested data structure, and is used when information is available at several different levels of observational units. For example, in epidemiological modeling to describe infection trajectories for multiple countries, observational units are countries, and each country has its own time-based profile of daily infected cases. In decline curve analysis to describe oil or gas production decline curve for multiple wells, observational units are oil or gas wells in a reservoir region, and each well has each own time-based profile of oil or gas production rates (usually, barrels per month). Hierarchical modeling is used to devise computation based strategies for multiparameter problems. == Philosophy == Statistical methods and models commonly involve multiple parameters that can be regarded as related or connected in such a way that the problem implies a dependence of the joint probability model for these parameters. Individual degrees of belief, expressed in the form of probabilities, come with uncertainty. Amidst this is the change of the degrees of belief over time. As was stated by Professor José M. Bernardo and Professor Adrian F. Smith, "The actuality of the learning process consists in the evolution of individual and subjective beliefs about the reality." These subjective probabilities are more directly involved in the mind rather than the physical probabilities. Hence, it is with this need of updating beliefs that Bayesians have formulated an alternative statistical model which takes into account the prior occurrence of a particular event. == Bayes' theorem == The assumed occurrence of a real-world event will typically modify preferences between certain options. This is done by modifying the degrees of belief attached, by an individual, to the events defining the options. Suppose in a study of the effectiveness of cardiac treatments, with the patients in hospital j having survival probability θ j {\displaystyle \theta _{j}} , the survival probability will be updated with the occurrence of y, the event in which a controversial serum is created which, as believed by some, increases survival in cardiac patients. In order to make updated probability statements about θ j {\displaystyle \theta _{j}} , given the occurrence of event y, we must begin with a model providing a joint probability distribution for θ j {\displaystyle \theta _{j}} and y. This can be written as a product of the two distributions that are often referred to as the prior distribution P ( θ ) {\displaystyle P(\theta )} and the sampling distribution P ( y ∣ θ ) {\displaystyle P(y\mid \theta )} respectively: P ( θ , y ) = P ( θ ) P ( y ∣ θ ) {\displaystyle P(\theta ,y)=P(\theta )P(y\mid \theta )} Using the basic property of conditional probability, the posterior distribution will yield: P ( θ ∣ y ) = P ( θ , y ) P ( y ) = P ( y ∣ θ ) P ( θ ) P ( y ) {\displaystyle P(\theta \mid y)={\frac {P(\theta ,y)}{P(y)}}={\frac {P(y\mid \theta )P(\theta )}{P(y)}}} This equation, showing the relationship between the conditional probability and the individual events, is known as Bayes' theorem. This simple expression encapsulates the technical core of Bayesian inference which aims to deconstruct the probability, P ( θ ∣ y ) {\displaystyle P(\theta \mid y)} , relative to solvable subsets of its supportive evidence. == Exchangeability == The usual starting point of a statistical analysis is the assumption that the n values y 1 , y 2 , … , y n {\displaystyle y_{1},y_{2},\ldots ,y_{n}} are exchangeable. If no information – other than data y – is available to distinguish any of the θ j {\displaystyle \theta _{j}} 's from any others, and no ordering or grouping of the parameters can be made, one must assume symmetry of prior distribution parameters. This symmetry is represented probabilistically by exchangeability. Generally, it is useful and appropriate to model data from an exchangeable distribution as independently and identically distributed, given some unknown parameter vector θ {\displaystyle \theta } , with distribution P ( θ ) {\displaystyle P(\theta )} . === Finite exchangeability === For a fixed number n, the set y 1 , y 2 , … , y n {\displaystyle y_{1},y_{2},\ldots ,y_{n}} is exchangeable if the joint probability P ( y 1 , y 2 , … , y n ) {\displaystyle P(y_{1},y_{2},\ldots ,y_{n})} is invariant under permutations of the indices. That is, for every permutation π {\displaystyle \pi } or ( π 1 , π 2 , … , π n ) {\displaystyle (\pi _{1},\pi _{2},\ldots ,\pi _{n})} of (1, 2, …, n), P ( y 1 , y 2 , … , y n ) = P ( y π 1 , y π 2 , … , y π n ) . {\displaystyle P(y_{1},y_{2},\ldots ,y_{n})=P(y_{\pi _{1}},y_{\pi _{2}},\ldots ,y_{\pi _{n}}).} The following is an exchangeable, but not independent and identical (iid), example: Consider an urn with a red ball and a blue ball inside, with probability 1 2 {\displaystyle {\frac {1}{2}}} of drawing either. Balls are drawn without replacement, i.e. after one ball is drawn from the n {\displaystyle n} balls, there will be n − 1 {\displaystyle n-1} remaining balls left for the next draw. Let Y i = { 1 , if the i th ball is red , 0 , otherwise . {\displaystyle {\text{Let }}Y_{i}={\begin{cases}1,&{\text{if the }}i{\text{th ball is red}},\\0,&{\text{otherwise}}.\end{cases}}} The probability of selecting a red ball in the first draw and a blue ball in the second draw is equal to the probability of selecting a blue ball on the first draw and a red on the second, both of which are 1/2: P ( y 1 = 1 , y 2 = 0 ) = P ( y 1 = 0 , y 2 = 1 ) = 1 2 {\displaystyle P(y_{1}=1,y_{2}=0)=P(y_{1}=0,y_{2}=1)={\frac {1}{2}}} . This makes y 1 {\displaystyle y_{1}} and y 2 {\displaystyle y_{2}} exchangeable. But the probability of selecting a red ball on the second draw given that the red ball has already been selected in the first is 0. This is not equal to the probability that the red ball is selected in the second draw, which is 1/2: P ( y 2 = 1 ∣ y 1 = 1 ) = 0 ≠ P ( y 2 = 1 ) = 1 2 {\displaystyle P(y_{2}=1\mid y_{1}=1)=0\neq P(y_{2}=1)={\frac {1}{2}}} . Thus, y 1 {\displaystyle y_{1}} and y 2 {\displaystyle y_{2}} are not independent. If x 1 , … , x n {\displaystyle x_{1},\ldots ,x_{n}} are independent and identically distributed, then they are exchangeable, but the converse is not necessarily true. === Infinite exchangeability === Infinite exchangeability is the property that every finite subset of an infinite sequence y 1 {\displaystyle y_{1}} , y 2 , … {\displaystyle y_{2},\ldots } is exchangeable. For any n, the sequence y 1 , y 2 , … , y n {\displaystyle y_{1},y_{2},\ldots ,y_{n}} is exchangeable. == Hierarchical models == === Components === Bayesian hierarchical modeling makes use of two important concepts in deriving the posterior distribution, namely: Hyperparameters: parameters of the prior distribution Hyperpriors: distributions of Hyperparameters Suppose a random variable Y follows a normal distribution with parameter θ {\displaystyle \theta } as the mean and 1 as the variance, that is Y ∣ θ ∼ N ( θ , 1 ) {\displaystyle Y\mid \theta \sim N(\theta ,1)} . The tilde relation ∼ {\displaystyle \sim } can be read as "has the distribution of" or "is distributed as". Suppose also that the parameter θ {\displaystyle \theta } has a distribution given by a normal distribution with mean μ {\displaystyle \mu } and variance 1, i.e. θ ∣ μ ∼ N ( μ , 1 ) {\displaystyle \theta \mid \mu \sim N(\mu ,1)} . Furthermore, μ {\displaystyle \mu } follows another distribution given, for example, by the standard normal distribution, N ( 0 , 1 ) {\displaystyle {\text{N}}(0,1)} . The parameter μ {\dis
Read more →
FERET database

The Facial Recognition Technology (FERET) database is a dataset used for facial recognition system evaluation as part of the Face Recognition Technology (FERET) program. It was first established in 1993 under a collaborative effort between Harry Wechsler at George Mason University and Jonathon Phillips at the Army Research Laboratory in Adelphi, Maryland. The FERET database serves as a standard database of facial images for researchers to use to develop various algorithms and report results. The use of a common database also allowed one to compare the effectiveness of different approaches in methodology and gauge their strengths and weaknesses. The facial images for the database were collected between December 1993 and August 1996, accumulating a total of 14,126 images pertaining to 1,199 individuals along with 365 duplicate sets of images that were taken on a different day. In 2003, the Defense Advanced Research Projects Agency (DARPA) released a high-resolution, 24-bit color version of these images. The dataset tested includes 2,413 still facial images, representing 856 individuals. The FERET database has been used by more than 460 research groups and is managed by the National Institute of Standards and Technology (NIST).
Read more →
Autoencoder

An autoencoder is a type of artificial neural network used to learn efficient codings of unlabeled data (unsupervised learning). An autoencoder learns two functions: an encoding function that transforms the input data, and a decoding function that recreates the input data from the encoded representation. The autoencoder learns an efficient representation (encoding) for a set of data, typically for dimensionality reduction, to generate lower-dimensional embeddings for subsequent use by other machine learning algorithms. Variants exist which aim to make the learned representations assume useful properties. Examples are regularized autoencoders (sparse, denoising and contractive autoencoders), which are effective in learning representations for subsequent classification tasks, and variational autoencoders, which can be used as generative models. Autoencoders are applied to many problems, including facial recognition, feature detection, anomaly detection, and learning the meaning of words. In terms of data synthesis, autoencoders can also be used to randomly generate new data that is similar to the input (training) data. == Mathematical principles == === Definition === An autoencoder is defined by the following components: Two sets: the space of encoded messages Z {\displaystyle {\mathcal {Z}}} ; the space of decoded messages X {\displaystyle {\mathcal {X}}} . Typically X {\displaystyle {\mathcal {X}}} and Z {\displaystyle {\mathcal {Z}}} are Euclidean spaces, that is, X = R m , Z = R n {\displaystyle {\mathcal {X}}=\mathbb {R} ^{m},{\mathcal {Z}}=\mathbb {R} ^{n}} with m > n . {\displaystyle m>n.} Two parametrized families of functions: the encoder family E ϕ : X → Z {\displaystyle E_{\phi }:{\mathcal {X}}\rightarrow {\mathcal {Z}}} , parametrized by ϕ {\displaystyle \phi } ; the decoder family D θ : Z → X {\displaystyle D_{\theta }:{\mathcal {Z}}\rightarrow {\mathcal {X}}} , parametrized by θ {\displaystyle \theta } .For any x ∈ X {\displaystyle x\in {\mathcal {X}}} , we usually write z = E ϕ ( x ) {\displaystyle z=E_{\phi }(x)} , and refer to it as the code, the latent variable, latent representation, latent vector, etc. Conversely, for any z ∈ Z {\displaystyle z\in {\mathcal {Z}}} , we usually write x ′ = D θ ( z ) {\displaystyle x'=D_{\theta }(z)} , and refer to it as the (decoded) message. Usually, both the encoder and the decoder are defined as multilayer perceptrons (MLPs). For example, a one-layer-MLP encoder E ϕ {\displaystyle E_{\phi }} is: E ϕ ( x ) = σ ( W x + b ) {\displaystyle E_{\phi }(\mathbf {x} )=\sigma (Wx+b)} where σ {\displaystyle \sigma } is an element-wise activation function, W {\displaystyle W} is a "weight" matrix, and b {\displaystyle b} is a "bias" vector. === Training an autoencoder === An autoencoder, by itself, is simply a tuple of two functions. To judge its quality, we need a task. A task is defined by a reference probability distribution μ r e f {\displaystyle \mu _{ref}} over X {\displaystyle {\mathcal {X}}} , and a "reconstruction quality" function d : X × X → [ 0 , ∞ ] {\displaystyle d:{\mathcal {X}}\times {\mathcal {X}}\to [0,\infty ]} , such that d ( x , x ′ ) {\displaystyle d(x,x')} measures how much x ′ {\displaystyle x'} differs from x {\displaystyle x} . With those, we can define the loss function for the autoencoder as L ( θ , ϕ ) := E x ∼ μ r e f [ d ( x , D θ ( E ϕ ( x ) ) ) ] {\displaystyle L(\theta ,\phi ):=\mathbb {\mathbb {E} } _{x\sim \mu _{ref}}[d(x,D_{\theta }(E_{\phi }(x)))]} The optimal autoencoder for the given task ( μ r e f , d ) {\displaystyle (\mu _{ref},d)} is then arg ⁡ min θ , ϕ L ( θ , ϕ ) {\displaystyle \arg \min _{\theta ,\phi }L(\theta ,\phi )} . The search for the optimal autoencoder can be accomplished by any mathematical optimization technique, but usually by gradient descent. This search process is referred to as "training the autoencoder". In most situations, the reference distribution is just the empirical distribution given by a dataset { x 1 , . . . , x N } ⊂ X {\displaystyle \{x_{1},...,x_{N}\}\subset {\mathcal {X}}} , so that μ r e f = 1 N ∑ i = 1 N δ x i {\displaystyle \mu _{ref}={\frac {1}{N}}\sum _{i=1}^{N}\delta _{x_{i}}} where δ x i {\displaystyle \delta _{x_{i}}} is the Dirac measure, the quality function is just L 2 {\displaystyle L^{2}} loss: d ( x , x ′ ) = ‖ x − x ′ ‖ 2 2 {\displaystyle d(x,x')=\|x-x'\|_{2}^{2}} , and ‖ ⋅ ‖ 2 {\displaystyle \|\cdot \|_{2}} is the Euclidean norm. Then the problem of searching for the optimal autoencoder is just a least-squares optimization: min θ , ϕ L ( θ , ϕ ) , where L ( θ , ϕ ) = 1 N ∑ i = 1 N ‖ x i − D θ ( E ϕ ( x i ) ) ‖ 2 2 {\displaystyle \min _{\theta ,\phi }L(\theta ,\phi ),\qquad {\text{where }}L(\theta ,\phi )={\frac {1}{N}}\sum _{i=1}^{N}\|x_{i}-D_{\theta }(E_{\phi }(x_{i}))\|_{2}^{2}} === Interpretation === An autoencoder has two main parts: an encoder that maps the message to a code, and a decoder that reconstructs the message from the code. An optimal autoencoder would perform as close to perfect reconstruction as possible, with "close to perfect" defined by the reconstruction quality function d {\displaystyle d} . The simplest way to perform the copying task perfectly would be to duplicate the signal. To suppress this behavior, the code space Z {\displaystyle {\mathcal {Z}}} usually has fewer dimensions than the message space X {\displaystyle {\mathcal {X}}} . Such an autoencoder is called undercomplete. It can be interpreted as compressing the message, or reducing its dimensionality. At the limit of an ideal undercomplete autoencoder, every possible code z {\displaystyle z} in the code space is used to encode a message x {\displaystyle x} that really appears in the distribution μ r e f {\displaystyle \mu _{ref}} , and the decoder is also perfect: D θ ( E ϕ ( x ) ) = x {\displaystyle D_{\theta }(E_{\phi }(x))=x} . This ideal autoencoder can then be used to generate messages indistinguishable from real messages, by feeding its decoder arbitrary code z {\displaystyle z} and obtaining D θ ( z ) {\displaystyle D_{\theta }(z)} , which is a message that really appears in the distribution μ r e f {\displaystyle \mu _{ref}} . If the code space Z {\displaystyle {\mathcal {Z}}} has dimension larger than (overcomplete), or equal to, the message space X {\displaystyle {\mathcal {X}}} , or the hidden units are given enough capacity, an autoencoder can learn the identity function and become useless. However, experimental results found that overcomplete autoencoders might still learn useful features. In the ideal setting, the code dimension and the model capacity could be set on the basis of the complexity of the data distribution to be modeled. A standard way to do so is to add modifications to the basic autoencoder, to be detailed below. == Variations == === Variational autoencoder (VAE) === Variational autoencoders (VAEs) belong to the families of variational Bayesian methods. Despite the architectural similarities with basic autoencoders, VAEs are architected with different goals and have a different mathematical formulation. The latent space is, in this case, composed of a mixture of distributions instead of fixed vectors. Given an input dataset x {\displaystyle x} characterized by an unknown probability function P ( x ) {\displaystyle P(x)} and a multivariate latent encoding vector z {\displaystyle z} , the objective is to model the data as a distribution p θ ( x ) {\displaystyle p_{\theta }(x)} , with θ {\displaystyle \theta } defined as the set of the network parameters so that p θ ( x ) = ∫ z p θ ( x , z ) d z {\displaystyle p_{\theta }(x)=\int _{z}p_{\theta }(x,z)dz} . === Sparse autoencoder (SAE) === Inspired by the sparse coding hypothesis in neuroscience, sparse autoencoders (SAE) are variants of autoencoders, such that the codes E ϕ ( x ) {\displaystyle E_{\phi }(x)} for messages tend to be sparse codes, that is, E ϕ ( x ) {\displaystyle E_{\phi }(x)} is close to zero in most entries. Sparse autoencoders may include more (rather than fewer) hidden units than inputs, but only a small number of the hidden units are allowed to be active at the same time. Encouraging sparsity improves performance on classification tasks. There are two main ways to enforce sparsity. One way is to simply clamp all but the highest-k activations of the latent code to zero. This is the k-sparse autoencoder. The k-sparse autoencoder inserts the following "k-sparse function" in the latent layer of a standard autoencoder: f k ( x 1 , . . . , x n ) = ( x 1 b 1 , . . . , x n b n ) {\displaystyle f_{k}(x_{1},...,x_{n})=(x_{1}b_{1},...,x_{n}b_{n})} where b i = 1 {\displaystyle b_{i}=1} if | x i | {\displaystyle |x_{i}|} ranks in the top k, and 0 otherwise. Backpropagating through f k {\displaystyle f_{k}} is simple: set gradient to 0 for b i = 0 {\displaystyle b_{i}=0} entries, and keep gradient for b i = 1 {\displaystyle b_{i}=1} entries. This is essentially a generalized ReLU function. The other way is a relaxed version of the k-
Read more →
Qloo

Qloo (pronounced "clue") is a company that uses artificial intelligence (AI) to understand taste and cultural correlations. It provides companies with an application programming interface (API). It received funding from Leonardo DiCaprio, Elton John, Barry Sternlicht, Pierre Lagrange and others. Qloo establishes consumer preference correlations via machine learning across data spanning cultural domains including music, film, television, dining, nightlife, fashion, books, and travel. The recommender system uses AI to predict correlations for further applications. == History == Qloo was founded in 2012 by chief executive officer Alex Elias and chief operating officer Jay Alger. Qloo initially launched an app designed for consumers, allowing them to understand their own tastes and receive personalized recommendations. The company amassed several million users and built a large catalog of cultural entities and corresponding user sentiment. In 2012, Qloo raised $1.4 million in seed funding from investors including Cedric the Entertainer, and venture capital firm Kindler Capital. Qloo had a public beta release in November 2012 after its initial funding. In 2013, the company raised an additional $1.6 million from Cross Creek Pictures founding partner Tommy Thompson, and Samih Toukan and Hussam Khoury, founders of Maktoob, an Internet services company purchased by Yahoo! for $164 million in 2009. On November 14, 2013, a website and an iPhone app were announced. The company later released an Android app, and tablet versions, in mid-2014. In 2015, Twitter approached Qloo about powering personalized social feeds and targeted eCommerce ads on the platform based on what users were posting. Qloo developed an enterprise-grade API to support Twitter’s needs. Twitter ended up pivoting to enable brands to use the social platform for customer service and support, but Qloo was able to sell access to its cultural intelligence via API to many other enterprise clients, marking the official transition from a B2C company to a B2B company. In 2016, Qloo secured $4.5 million in venture capital investment. The $4.5 million was split between a number of investors, including Barry Sternlicht, Pierre Lagrange, and Leonardo DiCaprio. In July 2017, Qloo raised $6.5 million in funding rounds from AXA Strategic Ventures, and Elton John. Following the investment, the founders stated in an interview with Tech Crunch that they would use the investment to expand Qloo's database. They hoped the move would secure larger contracts with corporate clients. At the time, clients already included Fortune 500 companies such as Twitter, PepsiCo, and BMW. In 2019, the company announced that it had acquired cultural recommendation service TasteDive, with Alex Elias becoming chairman of TasteDive. In September 2019, Qloo was named among the Top 14 Artificial Intelligence APIs by ProgrammableWeb. In 2022, Qloo raised $15M in Series B funding from Eldridge and AXA Venture Partners, enabling the privacy-centric AI leader to expand its team of world-class data scientists, enrich its technology, and build on its sales channels in order to continue to offer premier insights into global consumer taste for Fortune 500 companies across the globe. Qloo was recognized as the "Best Decision Intelligence Company" at the 2023 AI Breakthrough Awards. Also in 2023, the company was awarded a Top Performer Award by SourceForge. As of 2024, Qloo is a three-time Inc. 5000 honoree: No. 360 (2022), No. 344 (2021), No. 187 (2020). Qloo raised $25 million Series C round on February 21, 2024. The round was led by AI Ventures with participation from AXA Venture Partners, Eldridge, and Moderne Ventures, allowing Qloo to address new commercial surface areas for Taste AI, including on-device learning and foundational models leveraging Qloo, as well as introduce self-service platform to make consumer and taste analytics available to small and mid-sized enterprises and individuals. Qloo also announced pursuing opportunistic M&A using its balance sheet along the lines of the TasteDive acquisition completed, which expanded Qloo's first-party data moat and corpus of cultural learning. This latest financing brought the total amount raised since the company's founding in 2012 to over $56 million. == Services and features == Qloo calls itself a cultural AI platform to provide real-time correlation data across domains of culture and entertainment including: film, music, television, dining, nightlife, fashion, books, and travel. Each category contains subcategories. Qloo’s knowledge of a user's taste in one category can be utilized to offer suggestions in other categories. Users then rate the suggestions, providing it with feedback for future suggestions. Qloo has partnerships with companies such as Expedia and iTunes. == Technology == Qloo’s Taste AI technology uses machine learning to decode and predict consumers’ interests, maintaining user anonymity. It is powered by 3.7 billion lifestyle entities (brands, music, film, TV, dining, nightlife, fashion, books, travel, and more) and trillions of anonymized consumer behavioral signals. Through AI, Qloo identifies patterns in these data signals, making predictions about how much interest a person or group has in a concept or thing. Central to Qloo’s technology are algorithms designed to detect and mitigate biases within datasets and models, allowing Qloo to assess the fairness of its AI systems with a focus on attributes such as age, gender, and race, enabling the company to fine-tune its AI models to align with their ethical standards. They also use visualization tools to probe the behavior of their AI models for conducting counterfactual analyses and for comparing the performances of the AI models across diverse demographic segments. Qloo’s Taste AI doesn’t collect or use any Personally Identifiable Information (PII). Instead, it derives recommendations for audience segments based on co-occurrences between lifestyle entities and anonymized behavioral signals. == Applications == Starbucks uses Qloo to create in-store music playlists tailored to specific neighborhoods. Hershey’s uses Qloo to customize the content of assorted candy bags. Michelin uses Qloo to serve recommendations in its Michelin Guide app. Netflix leverages Qloo’s technology to enhance merchandising by identifying actors who resonate with certain demographics. Qloo also works with PepsiCo, Samsung, The New York Mets, BuzzFeed, and Ticketmaster, Universal Music Group, and OOH advertising company JCDecaux.
Read more →
Common Voice

Common Voice is a crowdsourcing project started by Mozilla to create a free and open speech corpus. The project is supported by volunteers who record sample sentences with a microphone and review recordings of other users. The transcribed sentences are collected in a voice database available under the public domain license CC0. This license ensures that developers can use the database for voice-to-text and text-to-voice applications without restrictions or costs. == Aims == Common Voice aims to provide diverse voice samples. According to Mozilla's Katharina Borchert, many existing projects took datasets from public radio or otherwise had datasets that underrepresented both women and people with pronounced accents. == Voice database == The first dataset was released in November 2017. More than 20,000 users worldwide had recorded 500 hours of English sentences. In February 2019, the first batch of languages was released for use. This included 18 languages such as English, French, German and Mandarin Chinese, but also less prevalent languages like Welsh and Kabyle. In total, this included almost 1,400 hours of recorded voice data from more than 42,000 contributors. By July 2020 the database had amassed 7,226 hours of voice recordings in 54 languages, 5,591 hours of which had been verified by volunteers. In May 2021, following the work to add Kinyarwanda, the project received a grant to add Kiswahili. At the beginning of 2022, Bengali.AI partnered with Common Voice to launch the "Bangla Speech Recognition" project that aims to make machines understand the Bangla language. 2000 hours of voice was collected. In September 2022, it was announced that the Twi language of Ghana was the 100th language to be added to the database. As of December 2025, Mozilla Common Voice collects voice data for over 250 languages, with the most hours having been collected in English, Catalan, Kinyarwanda, Belarusian and Esperanto.
Read more →
Wake-sleep algorithm

The wake-sleep algorithm is an unsupervised learning algorithm for deep generative models, especially Helmholtz Machines. The algorithm is similar to the expectation-maximization algorithm, and optimizes the model likelihood for observed data. The name of the algorithm derives from its use of two learning phases, the “wake” phase and the “sleep” phase, which are performed alternately. It can be conceived as a model for learning in the brain, but is also being applied for machine learning. == Description == The goal of the wake-sleep algorithm is to find a hierarchical representation of observed data. In a graphical representation of the algorithm, data is applied to the algorithm at the bottom, while higher layers form gradually more abstract representations. Between each pair of layers are two sets of weights: Recognition weights, which define how representations are inferred from data, and generative weights, which define how these representations relate to data. == Training == Training consists of two phases – the “wake” phase and the “sleep” phase. It has been proven that this learning algorithm is convergent. === The "wake" phase === Neurons are fired by recognition connections (from what would be input to what would be output). Generative connections (leading from outputs to inputs) are then modified to increase probability that they would recreate the correct activity in the layer below – closer to actual data from sensory input. === The "sleep" phase === The process is reversed in the “sleep” phase – neurons are fired by generative connections while recognition connections are being modified to increase probability that they would recreate the correct activity in the layer above – further to actual data from sensory input. == Extensions == Since the recognition network is limited in its flexibility, it might not be able to approximate the posterior distribution of latent variables well. To better approximate the posterior distribution, it is possible to employ importance sampling, with the recognition network as the proposal distribution. This improved approximation of the posterior distribution also improves the overall performance of the model.
Read more →