AI Code Unlimited

AI Code Unlimited — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Automated parking system

  An automated (car) parking system (APS) is a mechanical system designed to minimize the area and/or volume required for parking cars. Like a multi-story parking garage, an APS provides parking for cars on multiple levels stacked vertically to maximize the number of parking spaces while minimizing land usage. The APS, however, utilizes a mechanical system to transport cars to and from parking spaces (rather than the driver) in order to eliminate much of the space wasted in a multi-story parking garage. While a multi-story parking garage is similar to multiple parking lots stacked vertically, an APS is more similar to an automated storage and retrieval system for cars. Parking systems are generally powered by electric motors or hydraulic pumps that move vehicles into a storage position.The paternoster (shown animated at the right) is an example of one of the earliest and most common types of APS. APS are also generically known by a variety of other names, including:automated parking facility (APF), automated vehicle storage and retrieval system (AVSRS), car parking system, mechanical parking, and robotic parking garage. == History == The concept for the automated parking system was and is driven by two factors: a need for parking spaces and a scarcity of available land. The earliest use of an APS was in Paris, France in 1905 at the Garage Rue de Ponthieu. The APS consisted of a groundbreaking multi-story concrete structure with an internal car elevator to transport cars to upper levels where attendants parked the cars. In the 1920s, a Ferris wheel-like APS (for cars rather than people) called a paternoster system became popular as it could park eight cars in the ground space normally used for parking two cars. Mechanically simple with a small footprint, the paternoster was easy to use in many places, including inside buildings. At the same time, Kent Automatic Garages was installing APS with capacities exceeding 1,000 cars. The “ferris-wheel,” or paternoster system — was created by the Westinghouse Corporation in 1923 and subsequently built in 1932 on Chicago's Monroe Street. The Nash Motor Company created the first glass-enclosed version of this system for the Chicago Century of Progress Exhibition in 1933 The first driverless parking garage opened in 1951 in Washington, D.C., but was replaced with office space due to increasing land values. APS saw a spurt of interest in the U.S. in the late 1940s and 1950s with the Bowser, Pigeon Hole and Roto Park systems. In 1957, 74 Bowser, Pigeon Hole systems were installed, and some of these systems remain in operation. However, interest in APS in the U.S. waned due to frequent mechanical problems and long waiting times for patrons to retrieve their cars. In the United Kingdom, the Auto Stacker opened in 1961 in Woolwich, south east London, but proved equally difficult to operate. Interest in APS in the U.S. was renewed in the 1990s, and there were 25 major current and planned APS projects (representing nearly 6,000 parking spaces) in 2012. The first American robotic parking garage opened in 2002 in Hoboken, New Jersey. While interest in the APS in the U.S. languished until the 1990s, Europe, Asia and Central America had been installing more technically advanced APS since the 1970s. In the early 1990s, nearly 40,000 parking spaces were being built annually using the paternoster APS in Japan. In 2012, there are an estimated 1.6 million APS parking spaces in Japan. The ever-increasing scarcity of available urban land (urbanization) and increase of the number of cars in use (motorization) have combined with sustainability and other quality-of-life issues to renew interest in APS as alternatives to multi-storey car parks, on-street parking, and parking lots. == Largest systems == The largest Automated Parking Facility in the world is in Al Jahra, Kuwait, and provides 2,314 parking spaces. The world's fastest Automated Parking System is in Wolfsburg, Germany, with a retrieval time of 1 minute and 44 seconds. The largest APS in Europe is at Dokk1 in Aarhus, Denmark, and provides 1,000 parking spaces via 20 car lifts. == Space saving == All APS take advantage of a common concept to decrease the area of parking spaces - removing the driver and passengers from the car before it is parked. With either fully automated or semi-automated APS, the car is driven up to an entry point to the APS and the driver and passengers exit the car. The car is then moved automatically or semi-automatically (with some attendant action required) to its parking space. The space-saving provided by the APS, compared to the multi-story parking garage, is derived primarily from a significant reduction in space not directly related to the parking of the car: Parking space width and depth (and distances between parking spaces) are dramatically reduced since no allowance need be made for driving the car into the parking space or for the opening of car doors (for drivers and passengers) No driving lanes or ramps are needed to drive the car to/from the entrance/exit to a parking space Ceiling height is minimized since there is no pedestrian traffic (drivers and passengers) in the parking area, and No walkways, stairways or elevators are needed to accommodate pedestrians in the parking area. With the elimination of ramps, driving lanes, pedestrians and the reduction in ceiling heights, the APS requires substantially less structural material than the multi-story parking garage. Many APS utilize a steel framework (some use thin concrete slabs) rather than the monolithic concrete design of the multi-story parking garage. These factors contribute to an overall volume reduction and further space savings for the APS. == Other considerations == In addition to the space saving, many APS designs provide a number of secondary benefits: The parked cars and their contents are more secure since there is no public access to parked cars Minor parking lot damage such as scrapes and dents are eliminated Drivers and passengers are safer not having to walk through parking lots or garages Driving around in search of a parking space is eliminated, thereby reducing engine emissions and wasted time Only minimal ventilation and lighting systems are needed Handicap access is improved The volume and visual impact of the parking structure is minimized Shorter construction time === Problems === There have been a number of problems with robotic parking systems, particularly in the United States. The systems work well in balanced throughput situations like shopping malls and train stations, but they are unsuited to high peak volume applications like rush hour usage or stadiums and they suffer from technical problems. Further, parkers not familiar with the system may cause problems, for example by failing to push the button to alert a fully automated system to the presence of a car to be parked. In London around 40 vehicles were trapped for two years in CBRE's system. == Fully automated vs semi-automated == Fully automated parking systems operate much like robotic valet parking. The driver drives the car into an APS entry (transfer) area. The driver and all passengers exit the car. The driver uses an automated terminal nearby for payment and receipt of a ticket. When driver and passengers have left the entry area, the mechanical system lifts the car and transports it to a pre-determined parking space in the system. More sophisticated fully automated APS will obtain the dimensions of cars on entry in order to place them in the smallest available parking space. The driver retrieves a car by inserting a ticket or code into an automated terminal. The APS lifts the car from its parking space and delivers it to an exit area. Most often, the retrieved car has been oriented to eliminate the need for the driver to back out. Fully automated APS theoretically eliminate the need for parking attendants. Semi-automated APS also use a mechanical system of some type to move a car to its parking space, however putting the car into and/or the operation of the system requires some action by an attendant or the driver. The choice between fully and semi-automated APS is often a matter of space and cost, however large capacity (> 100 cars) tend to be fully automated. == Applications == By virtue of their relatively smaller volume and mechanized parking systems, APS are often used in locations where a multi-story parking garage would be too large, too costly or impractical. Examples of such applications include, under or inside existing or new structures, between existing structures and in irregularly shaped areas. APS can also be applied in situations similar to multi-storey parking garages such as freestanding above ground, under buildings above grade and under buildings below grade. == Costs == The direct comparison of costs between an APS and a multi-story parking garage can be complicated by many variables such as capacity, land costs, area shape, number and location of entranc

  Read more →
• 

  Mass media use by the Islamic State

  The Islamic State (IS) is known for its extensive and effective use of propaganda. It uses a version of the Muslim Black Standard flag and developed an emblem which has clear symbolic meaning in the Muslim world. The Islamic State targets younger audiences, such as teenagers and young adults, since they are more vulnerable to propaganda. It is known to exploit the internet to spread its propaganda by establishing websites, such as the Al Fustat domain. Videos by the Islamic State are commonly accompanied by nasheeds (chants), notable examples being the chant Dawlat al-Islam Qamat, which came to be viewed as an unofficial anthem of the Islamic State, and Salil al-Sawarim. Academic research has emphasized the scale and volume of Islamic State media production beyond its flagship magazines. A quantitative study cited in R. Malash’s academic work documented 1,373 distinct Islamic State media products released over a six-month period between 1 August 2017 and 28 February 2018, including magazines, newsletters, reports, photographic releases, audio recordings, and other media formats. Scholars have used such datasets to illustrate the breadth and intensity of the group’s media output, particularly during periods of territorial decline, when propaganda activity remained high despite military pressure. == Traditional media == === Al-Furqan Foundation for Media Production === In January 2006, shortly after the group's rebranding as the "Islamic State of Iraq", it established the Al-Furqan Foundation for Media Production (Arabic: مؤسسة الفرقان للإنتاج الإعلامي, romanized: Muasasat al-Furqān lil'īntāj al'ilāmī), which produces CDs, DVDs, posters, pamphlets, and web-related propaganda products and official statements. It is the primary media production house of the Islamic State and responsible for production of major media releases, including the statements of the spokesmen and leaders of the group. On January 10, 2006, Al-Furqan released its very first video, titled (Arabic: زحف الأنوار, romanized: Zahf al-Anwār) It was founded by the Iraqi man Dr Wa'il al-Fayad, known as Abu Muhammad al-Furqan. He got his name "Al-Furqan" from his role in founding this media house, which was named after the 25th surah of the Quran Al-Furqan. It is the oldest media production house for the Islamic State, being founded in November 2006 to release media for the Islamic State of Iraq. The earliest release indexed by the SITE Intelligence Group is on 21 November 2006, documenting the storming of a police station in the Iraqi town of Miqdadiyah. Al-Furqan is considered to be a considerable innovation in jihadist media, with Kavkaz Center describing it as "a milestone on the path of jihad, a distinguished media that takes the great care in the management of the conflict with the crusaders and their tails and to expose the lies in the crusader's media." In October 2007, the Long War Journal reported on United States Army raids targeting Al-Furqan media cell members across Iraq, including in Mosul and Samarra. Between August 2013 and March 2014 they released the 22 part series Messages from the Land of Epic Battles. On 2 September 2014 SITE Intelligence Group discovered the beheading video called A Second Message to America, about the death of Steven Sotloff. Since then, Al-Furqan has released videos of their operations across Iraq and Syria, as well as execution videos directed to governments around the world. In April 2019, Al-Furqan released a video Interviewing Abu Bakr al-Baghdadi. Al-Furqan also produces media in the form of audio, which consists mostly of recordings of IS leaders and spokesmen giving speeches, as well as producing a single nasheed under their name called "Ya Allah Al-Jannah" (O Allah, (we ask you for) Paradise), sung by now-dead member of IS, Uqab Al-Marzuqi. === Al-I'tisam Foundation for Media Production === The Islamic State of Iraq founded a second media foundation - Al-I'tisam Media Foundation - around 2011, marked by their first video release, titled "The Conqueror of the Murtaddin: Abu Ahmad Al-Ansari". The foundation has since released a few series of videos, 50 parts of "Windows on the Land of Battles", 9 parts of "Pictures from the Land of Battles", a 9-part series quoting leaders about the establishment of the Islamic State, and other series before their last release, "Deterring the Safavids in Salah ad-Din" in 2015. Since then, there were no further releases from their behalf. === Al-Hayat Media Center === In mid-2014, IS established the Al-Hayat Media Center, which targets Western audiences and produces material in English, German, Russian, Urdu, Indonesian, Turkish, Bengali, Chinese, Bosnian, Kurdish, Uyghur, and French. When IS announced its expansion to other countries in November 2014 it established media departments for the new branches, and its media apparatus ensured that the new branches follow the same models it uses in Iraq and Syria. Then FBI Director James Comey said that IS's "propaganda is unusually slick," noting that, "They are broadcasting... in something like 23 languages". In July 2014, Al-Hayat began publishing a digital magazine called Dabiq, in a number of different languages including English. According to the magazine, its name is taken from the town of Dabiq in northern Syria, which is mentioned in a hadith about Armageddon. Al-Hayat also began publishing other digital magazines, including the Turkish language Konstantiniyye, the Ottoman word for Istanbul, the French language Dar al-Islam, and the Russian language Istok (Russian: Исток). By late 2016, these magazines had apparently all been discontinued, with Al-Hayat's material being consolidated into a new magazine called Rumiyah (Arabic for Rome). === Al-Naba === While the group's glossy, foreign-language magazines like Dabiq and Rumiyah ceased publication as the group lost territory, the weekly Arabic newsletter Al-Naba (The News) has continued to publish regularly, becoming the central pillar of the group's "media jihad" in the post-territorial phase. Recent scholarship, including studies published in 2025, suggests that Al-Naba serves a dual purpose: maintaining internal cohesion among dispersed fighters and projecting a narrative of endurance to enemies. Unlike the earlier magazines which were designed for recruitment, Al-Naba focuses on bureaucratic reporting, military statistics, and religious instruction. These are then translated and disseminated by decentralized supporter networks ("media mujahideen") to reach non-Arabic speakers. === Furat Media Center === The Al-Furat Media Center is another media center established in around 2015 to cater towards non-Arab speaking audiences. However, unlike the other organizations, the production wasn't as professional as ones made by the other media centers. Instead, they partially relied on local media departments and foreign communities of the Mujahideen to produce short-form videos. However, some professional long-form videos were also made under their behalf. As of now, the media center is the only known active branch of all the media centers of the Islamic State, after heavy losses from past campaigns against them. Their last release was "The Resolve of Muwahhidin in Russia", where videos from the Surovikino penal colony hostage crisis were edited and released. === Ajnad Foundation for Media Production === Ajnad Foundation is one of the official media wings of Islamic State which produces nasheeds and Quran recitations. It was established in January 2014 and has released more than 150 nasheeds. === Asdaa Foundation === Like the Ajnad Foundation, the Asdaa Foundation (Arabic: مؤسسة أصداء) or Asedaa Foundation produces Anasheed (Islamic chants). The foundation is the closest counterpart to Ajnad in producing Islamic State nasheeds, only difference being Ajnad is directly linked to the Islamic State while Asdaa is only classified as a "supporter organization" (munaser/munasera). The foundation had humble beginnings possibly in Yemen, where low-quality nasheeds were produced at first by 2 munshids, Abu Layth Al-Iraqi and Abu Ya'qub Al-Yamani. After that, the quality had improved a bit (possibly with new equipment and increased recognition) and eventually had its nasheeds included in the Islamic State's official media releases. One of its munshids, Abu Hafs is a renowned munshid who sings around 70 nasheeds, who as well works with Ajnad Foundation in some instances. He is currently alive, and working under Ansar Production Center (مركز إنتاج الأنصار), another Munasir foundation and Asedaa. Another Yemeni munshid, Abu Musab al-Adani, worked temporarily with Asdaa Foundation before defecting back to AQAP, from which he previously defected from. Some of their anasheed is used in IS's execution videos, a popular one is their human slaughterhouse execution video released during the time of Eid Al-Adha in 2016. The background nasheed they used was "We Came To Fill The Horizons With Terror", produced by the Asd

  Read more →
• 

  Group (online social networking)

  A group (often termed as a community, e-group or club) is a feature in many social networking services which allows users to create, post, comment to and read from their own interest- and niche-specific forums, often within the realm of virtual communities. Groups, which may allow for open or closed access, invitation and/or joining by other users outside the group, are formed to provide mini-networks within the larger, more diverse social network service. Much like electronic mailing lists, they are also owned and maintained by owners, moderators, or managers, who can edit posts to discussion threads and regulate member behavior within the group. However, unlike traditional Internet forums and mailing lists, groups in social networking services allow owners and moderators alike to share account credentials between groups without having to log in to every group. == History == The rise of the World Wide Web resulted in an expansion of the varieties of methods for communication on the Internet, much of which was limited in the 1980s to discussion in newsgroups, BBS and chat rooms. While the initial rise of web-based mass communication took place in the form of early Internet forums in the mid-1990s, a few services such as MSN Groups, Yahoo! Groups and eGroups pioneered the combination of web-based mailing list archives with user profiles; by 2000, such services doubled as full-fledged mailing lists and Internet forums, allowing users to create an extremely large variety of discussion and networking mediums with comparatively sparse thresholds of complexity. Further features included chat rooms (often Java-based), image and video galleries, and group calendars. The second spurt of bullecalbel networking, one which was less dependent upon mailing list-related features and more upon Internet forum features, began in the early- to mid-2000s in the form of such services as LiveJournal, Friendster, MySpace and Facebook. These services continued the evolution of the web-based e-group as a discussion and organization medium. In the late 2000s, services such as Yammer and Micromobs further advanced e-group communication by taking advantage of microblog-style activity streams. == In virtual worlds == In Second Life, groups are centered less around discussion forums (as such, an asynchronous conferencing feature is not built into the Second Life network as of 2009) and common interest, and are more centered on maintenance of a particular geographic location inside the network. Such groups are often created by the owners of areas such as buildings, plots of land or whole islands in order to cater to the most frequent visitors and patrons of the regions. With the limited asynchronous messaging capability of Second Life, groups are also a means of mass-emailing announcements pertinent to the group, but are not completely capable of hosting discussion or deliberation of such announcement messages. == The importance of online social networking groups == Before people expanded their social life to the internet, they had small circles. These included the networks gained from rural areas or villages, such as family, friends and neighbors, and community groups such as churches. These networks represented a social safety net to support individuals. Since we have moved a huge part of our social life to the internet, online social networking groups have become a way to maintain a structure in social life. Online networking is made up by clusters of people, bounding themselves together on the World Wide Web. To be able to sort out the many different clusters we belong to we use online groups to helps us arrange and make sense of all our contacts. This sense-making is rooted within us, we sort and put people into compartments or sort by categories to make sense and try to understand our relationships to the people around us. Online social networking groups therefore enables us to do the same thing online. Online social networks have a huge impact on people’s lives. Since the social network revolution has offered people with more loose ties and diversity in their relationships, it creates both stress and opportunities. Furthermore, the Internet revolution has transformed the contact point from a household to the individual. In addition, people are in constant communication with each other due to the mobile revolution. All in all, the mentioned revolutions created a new social operating system: "networked individualism". The way that people currently connect, communicate and exchange information can be described as a form of operating system because of the similarities between the structure of computer systems and the networked individualism that has taken form in society. These structures consist of unwritten rules, norms, constraints and opportunities which are apparent for those who are part of a specific network. == Concerns == There is some research claiming that fake news is infiltrating online social networking. A recent study claimed that people exposed to fake news generally revert to their original opinion even after finding out the information they were given was false.

  Read more →
• 

  CSS box model

  In web development, the CSS box model refers to how HTML elements are modeled in browser engines and how the dimensions of those HTML elements are derived from CSS properties. It is a fundamental concept for the composition of HTML webpages. The guidelines of the box model are described by web standards World Wide Web Consortium (W3C) specifically the CSS Working Group. For much of the late-1990s and early 2000s there had been non-standard compliant implementations of the box model in mainstream browsers. With the advent of CSS2 in 1998, which introduced the box-sizing property, the problem had mostly been resolved. == Specifics == The Cascading Style Sheets (CSS) specification describes how elements of web pages are displayed by graphical browsers. Section 4 of the CSS1 specification defines a "formatting model" that gives block-level elements—such as p and blockquote—a width and height, and three levels of boxes surrounding it: padding, borders, and margins. While the specification never uses the term "box model" explicitly, the term has become widely used by web developers and web browser vendors. All HTML elements can be considered "boxes", this includes div tag, p tag, or a tag. Each of those boxes has five modifiable dimensions: the height and width describe dimensions of the actual content of the box (text, images, ...) the padding describes the space between this content and the border of the box the border is any kind of line (solid, dotted, dashed...) surrounding the box, if present the margin is the space around the border According to the CSS1 specification, released by W3C in 1996 and revised in 1999, when a width or height is explicitly specified for any block-level element, it should determine only the width or height of the visible element, with the padding, borders, and margins applied afterward. Before CSS3, this box model was known as W3C box model, in CSS3, it is known as the content-box. The total width of a box is therefore margin-left + border-left + padding-left + width + padding-right + border-right + margin-right. Similarly, the total height of a box equals margin-top + border-top + padding-top + height + padding-bottom + border-bottom + margin-bottom. For example, the following CSS code would specify the box dimensions of each block belonging to 'my-class'. Moreover, each such box will have total height 140px and width 240px. CSS3 introduced the Internet Explorer box model to the standard, known referred to as border-box. == History == Before HTML 4 and CSS, very few HTML elements supported both border and padding, so the definition of the width and height of an element was not very contentious. However, it varied depending on the element. The HTML width attribute of a table defined the width of the table including its border. On the other hand, the HTML width attribute of an image defined the width of the image itself (inside any border). The only element to support padding in those early days was the table cell. Width for the cell was defined as "the suggested width for a cell content in pixels excluding the cell padding." In 1996, CSS introduced margin, border and padding for many more elements. It adopted a definition width in relation to content, border, margin and padding similar to that for a table cell. This has since become known as the W3C box model. At the time, very few browser vendors implemented the W3C box model to the letter. The two major browsers at the time, Netscape 4.0 and Internet Explorer 4.0 both defined width and height as the distance from border to border. This has been referred to as the traditional or the Internet Explorer box model. Internet Explorer in "quirks mode" includes the content, padding and borders within a specified width or height; this results in a narrower or shorter rendering of a box than would result following the standard behavior. The Internet Explorer box model behavior was often considered a bug, because of the way in which earlier versions of Internet Explorer handle the box model or sizing of elements in a web page, which differs from the standard way recommended by the W3C for the Cascading Style Sheets language. As of Internet Explorer 6, the browser supports an alternative rendering mode (called the "standards-compliant mode") which solves this discrepancy. However, for backward compatibility reasons, all versions still behave in the usual, non-standard way by default (see quirks mode). Internet Explorer for Mac is not affected by this non-standard behavior. === Workarounds === Internet Explorer versions 6 and onward are not affected by the bug if the page contains certain HTML document type declarations. These versions maintain the buggy behavior when in quirks mode for reasons of backward compatibility. For example, quirks mode is triggered: When the document type declaration is absent or incomplete; When an HTML 3 or earlier document is encountered; When an HTML 4.0 Transitional or Frameset document type declaration is used and a system identifier (URI) is not present; When an SGML comment or other unrecognized content appears before the document type declaration Internet Explorer 6 also uses quirks mode if there is an XML declaration prior to the document type declaration. Various workarounds have been devised to force Internet Explorer versions 5 and earlier to display Web pages using the W3C box model. These workarounds generally exploit unrelated bugs in Internet Explorer's CSS selector processing in order to hide certain rules from the browser. The best known of these workarounds is the "box model hack" developed by Tantek Çelik, a former Microsoft employee who developed this idea while working on Internet Explorer for the Macintosh. It involves specifying a width declaration for Internet Explorer for Windows, and then overriding it with another width declaration for CSS-compliant browsers. This second declaration is hidden from Internet Explorer for Windows by exploiting other bugs in the way that it parses CSS rules. The implementation of these CSS “hacks” has been further complicated by the public release of Internet Explorer 7, which has had some issues fixed, but not others, causing undesired results in pages using these hacks. Box model hacks have proven unreliable because they rely on bugs in browsers' CSS support that may be fixed in later versions. For this reason, some Web developers have instead recommended either avoiding specifying both width and padding for the same element or using conditional comment and/or CSS filters to work around the box model bug in older versions of Internet Explorer. == Support for Internet Explorer's box model == Web designer Doug Bowman has said that the original Internet Explorer box model represents a better, more logical approach. Peter-Paul Koch gives the example of a physical box, whose dimensions always refer to the box itself, including potential padding, but never its content. He says that this box model is more useful for graphic designers, who create designs based on the visible width of boxes rather than the width of their content. Bernie Zimmermann says that the Internet Explorer box model is closer to the definition of cell dimensions and padding used in the HTML table model. The W3C has included a "box-sizing" property in CSS3. When box-sizing: border-box; is specified for an element, any padding or border of the element is drawn inside the specified width and height, "as commonly implemented by legacy HTML user agents". Internet Explorer 8, WebKit browsers such as Apple Safari 5.1+ and Google Chrome, Gecko-based browsers such as Mozilla Firefox 29.0 and later, Opera 7.0 and later, and Konqueror 3.3.2 and later support the CSS3 box-sizing property. Gecko browsers previous than 29.0 support the same functionality using the browser-specific -moz-box-sizing property. border-box is the default box model used in Bootstrap framework.

  Read more →
• 

  Automatic acquisition of sense-tagged corpora

  The knowledge acquisition bottleneck is perhaps the major impediment to solving the word-sense disambiguation (WSD) problem. Unsupervised learning methods rely on knowledge about word senses, which is barely formulated in dictionaries and lexical databases. Supervised learning methods depend heavily on the existence of manually annotated examples for every word sense, a requisite that can so far be met only for a handful of words for testing purposes, as it is done in the Senseval exercises. == Existing methods == Therefore, one of the most promising trends in WSD research is using the largest corpus ever accessible, the World Wide Web, to acquire lexical information automatically. WSD has been traditionally understood as an intermediate language engineering technology which could improve applications such as information retrieval (IR). In this case, however, the reverse is also true: Web search engines implement simple and robust IR techniques that can be successfully used when mining the Web for information to be employed in WSD. The most direct way of using the Web (and other corpora) to enhance WSD performance is the automatic acquisition of sense-tagged corpora, the fundamental resource to feed supervised WSD algorithms. Although this is far from being commonplace in the WSD literature, a number of different and effective strategies to achieve this goal have already been proposed. Some of these strategies are: acquisition by direct Web searching (searches for monosemous synonyms, hypernyms, hyponyms, parsed gloss' words, etc.), Yarowsky algorithm (bootstrapping), acquisition via Web directories, and acquisition via cross-language meaning evidences. == Summary == === Optimistic results === The automatic extraction of examples to train supervised learning algorithms reviewed has been, by far, the best explored approach to mine the web for word-sense disambiguation. Some results are certainly encouraging: In some experiments, the quality of the Web data for WSD equals that of human-tagged examples. This is the case of the monosemous relatives plus bootstrapping with Semcor seeds technique and the examples taken from the ODP Web directories. In the first case, however, Semcor-size example seeds are necessary (and only available for English), and it has only been tested with a very limited set of nouns; in the second case, the coverage is quite limited, and it is not yet clear whether it can be grown without compromising the quality of the examples retrieved. It has been shown that a mainstream supervised learning technique trained exclusively with web data can obtain better results than all unsupervised WSD systems which participated at Senseval-2. Web examples made a significant contribution to the best Senseval-2 English all-words system. === Difficulties === There are, however, several open research issues related to the use of Web examples in WSD: High precision in the retrieved examples (i.e., correct sense assignments for the examples) does not necessarily lead to good supervised WSD results (i.e., the examples are possibly not useful for training). The most complete evaluation of Web examples for supervised WSD indicates that learning with Web data improves over unsupervised techniques, but the results are nevertheless far from those obtained with hand-tagged data, and do not even beat the most-frequent-sense baseline. Results are not always reproducible; the same or similar techniques may lead to different results in different experiments. Compare, for instance, Mihalcea (2002) with Agirre and Martínez (2004), or Agirre and Martínez (2000) with Mihalcea and Moldovan (1999). Results with Web data seem to be very sensitive to small differences in the learning algorithm, to when the corpus was extracted (search engines change continuously), and on small heuristic issues (e.g., differences in filters to discard part of the retrieved examples). Results are strongly dependent on bias (i.e., on the relative frequencies of examples per word sense). It is unclear whether this is simply a problem of Web data, or an intrinsic problem of supervised learning techniques, or just a problem of how WSD systems are evaluated (indeed, testing with rather small Senseval data may overemphasize sense distributions compared to sense distributions obtained from the full Web as corpus). In any case, Web data has an intrinsic bias, because queries to search engines directly constrain the context of the examples retrieved. There are approaches that alleviate this problem, such as using several different seeds/queries per sense or assigning senses to Web directories and then scanning directories for examples; but this problem is nevertheless far from being solved. Once a Web corpus of examples is built, it is not entirely clear whether its distribution is safe from a legal perspective. === Future === Besides automatic acquisition of examples from the Web, there are some other WSD experiments that have profited from the Web: The Web as a social network has been successfully used for cooperative annotation of a corpus (OMWE, Open Mind Word Expert project), which has already been used in three Senseval-3 tasks (English, Romanian and Multilingual). The Web has been used to enrich WordNet senses with domain information: topic signatures and Web directories, which have in turn been successfully used for WSD. Also, some research benefited from the semantic information that the Wikipedia maintains on its disambiguation pages. It is clear, however, that most research opportunities remain largely unexplored. For instance, little is known about how to use lexical information extracted from the Web in knowledge-based WSD systems; and it is also hard to find systems that use Web-mined parallel corpora for WSD, even though there are already efficient algorithms that use parallel corpora in WSD.

  Read more →
• 

  Universal Plug and Play

  UPnP (originally Universal Plug and Play) is a set of Internet Protocol-based networking protocols that permits networked devices, such as personal computers, printers, Internet gateways, Wi-Fi access points and mobile devices, to seamlessly discover each other's presence on the network and establish functional network services. UPnP is intended primarily for residential networks without enterprise-class devices. Officially, only the abbreviations UPnP and UPnP+ are trademarked. UPnP assumes the network runs IP, and then uses HTTP on top of IP to provide device/service description, actions, data transfer and event notification. Device search requests and advertisements are supported by running HTTP on top of UDP (port 1900) using multicast (known as HTTPMU). Responses to search requests are also sent over UDP, but are instead sent using unicast (known as HTTPU). Conceptually, UPnP extends plug and play—a technology for dynamically attaching devices directly to a computer—to zero-configuration networking for residential and SOHO wireless networks. UPnP devices are plug-and-play in that, when connected to a network, they automatically establish working configurations with other devices, removing the need for users to manually configure and add devices through IP addresses. UPnP is generally regarded as unsuitable for deployment in business settings for reasons of economy, complexity, and consistency: the multicast foundation makes it chatty, consuming too many network resources on networks with a large population of devices; the simplified access controls do not map well to complex environments. == Overview == The UPnP architecture allows device-to-device networking of consumer electronics, mobile devices, personal computers, and networked home appliances. It is a distributed, open architecture protocol based on established standards such as the Internet Protocol Suite (TCP/IP), HTTP, XML, and SOAP. UPnP control points (CPs) are devices which use UPnP protocols to control UPnP controlled devices (CDs). The UPnP architecture supports zero-configuration networking. A UPnP-compatible device from any vendor can dynamically join a network, obtain an IP address, announce its name, advertise or convey its capabilities upon request, and learn about the presence and capabilities of other devices. Dynamic Host Configuration Protocol (DHCP) and Domain Name System (DNS) servers are optional and are only used if they are available on the network. Devices can disconnect from the network automatically without leaving state information. UPnP was published as a 73-part international standard ISO/IEC 29341 in December 2008. Other UPnP features include: Media and device independence UPnP technology can run on many media that support IP, including Ethernet, FireWire, Infrared (IrDA), home wiring (G.hn) and Radiofrequency (Bluetooth, Wi-Fi). No special device driver support is necessary; common network protocols are used instead. User interface (UI) control Optionally, the UPnP architecture enables devices to present a user interface through a web browser (see Presentation below). Operating system and programming language independence Any operating system and any programming language can be used to build UPnP products. UPnP stacks are available for most platforms and operating systems in both closed- and open-source forms. Programmatic control UPnP architecture also enables conventional application programmatic control. Extensibility Each UPnP product can have device-specific services layered on top of the basic architecture. In addition to combining services defined by the UPnP Forum in various ways, vendors can define their own device and service types. They can extend standard devices and services with vendor-defined actions, state variables, data structure elements, and variable values. == Protocol == UPnP uses common Internet technologies. It assumes the network must run Internet Protocol (IP) and then uses HTTP, SOAP and XML on top of IP, to provide device/service description, actions, data transfer and eventing. Device search requests and advertisements are supported by running HTTP on top of UDP using multicast (known as HTTPMU). Responses to search requests are also sent over UDP, but are instead sent using unicast (known as HTTPU). UPnP uses UDP due to its lower overhead, as it does not require confirmation of received data and retransmission of corrupt packets. HTTPU and HTTPMU specifications were initially submitted as an Internet Draft, but it expired in 2001; These specifications have since been integrated into the actual UPnP specifications. UPnP uses UDP port 1900, and all used TCP ports are derived from the SSDP alive and response messages. === Addressing === The foundation for UPnP networking is IP addressing. Each device must implement a DHCP client and search for a DHCP server when the device is first connected to the network. If no DHCP server is available, the device must assign itself an address. The process by which a UPnP device assigns itself an address is known within the UPnP Device Architecture as AutoIP. In UPnP Device Architecture Version 1.0, AutoIP is defined within the specification itself; in UPnP Device Architecture Version 1.1, AutoIP references IETF RFC 3927. If during the DHCP transaction, the device obtains a domain name, for example, through a DNS server or via DNS forwarding, the device should use that name in subsequent network operations; otherwise, the device should use its IP address. === Discovery === Once a device has established an IP address, the next step in UPnP networking is discovery. The UPnP discovery protocol is known as the Simple Service Discovery Protocol (SSDP). When a device is added to the network, SSDP allows that device to advertise its services to control points on the network. This is achieved by sending SSDP alive messages. When a control point is added to the network, SSDP enables that control point to actively search for devices of interest on the network or listen passively to SSDP alive messages from devices. The fundamental exchange is a discovery message containing a few essential details about the device or one of its services, such as its type, identifier, and a pointer (network location) to more detailed information. === Description === After a control point has discovered a device, it still knows very little about the device. For the control point to learn more about the device and its capabilities, or to interact with the device, it must retrieve the device's description from the location (URL) provided by the device in the discovery message. The UPnP Device Description is expressed in XML. It includes vendor-specific manufacturer information like the model name and number, serial number, manufacturer name, (presentation) URLs to vendor-specific websites, etc. The description also includes a list of any embedded services. For each service, the Device Description document lists the URLs for control, eventing and service description. Each service description includes a list of the commands, or actions, to which the service responds, and parameters, or arguments, for each action; the description for a service also includes a list of variables; these variables model the state of the service at run time and are described in terms of their data type, range, and event characteristics. === Control === Having retrieved a description of the device, the control point can send actions to a device's service. To do this, a control point sends a suitable control message to the control URL for the service (provided in the device description). Control messages are also expressed in XML using the Simple Object Access Protocol (SOAP). Much like function calls, the service returns any action-specific values in response to the control message. The effects of the action, if any, are modeled by changes in the variables that describe the run-time state of the service. === Event notification === Another capability of UPnP networking is event notification, or eventing. The event notification protocol defined in the UPnP Device Architecture is known as General Event Notification Architecture (GENA). A UPnP description for a service includes a list of actions the service responds to and a list of variables that model the state of the service at runtime. The service publishes updates when these variables change, and a control point may subscribe to receive this information. The service publishes updates by sending event messages. Event messages contain the names of one or more state variables and their current values. These messages are also expressed in XML. A special initial event message is sent when a control point first subscribes; this event message contains the names and values for all evented variables and allows the subscriber to initialize its model of the state of the service. To support scenarios with multiple control points, eventing is designed to keep all control points equally informed

  Read more →
• 

  Temporal resolution

  Temporal resolution (TR) refers to the discrete resolution of a measurement with respect to time. It is defined as the amount of time needed to revisit and acquire data for the same location. When applied to remote sensing, this amount of time is influenced by the sensor platform's orbital characteristics and the features of the sensor itself. The temporal resolution is low when the revisiting delay is high and vice versa. Temporal resolution is typically expressed in days. == Physics == Often there is a trade-off between the temporal resolution of a measurement and its spatial resolution, due to Heisenberg's uncertainty principle. In some contexts, such as particle physics, this trade-off can be attributed to the finite speed of light and the fact that it takes a certain period of time for the photons carrying information to reach the observer. In this time, the system might have undergone changes itself. Thus, the longer the light has to travel, the lower the temporal resolution. == Technology == === Computing === In another context, there is often a tradeoff between temporal resolution and computer storage. A transducer may be able to record data every millisecond, but available storage may not allow this, and in the case of 4D PET imaging the resolution may be limited to several minutes. === Electronic displays === In some applications, temporal resolution may instead be equated to the sampling period, or its inverse, the refresh rate, or update frequency in Hertz, of a TV, for example. The temporal resolution is distinct from temporal uncertainty. This would be analogous to conflating image resolution with optical resolution. One is discrete, the other, continuous. The temporal resolution is a resolution somewhat the 'time' dual to the 'space' resolution of an image. In a similar way, the sample rate is equivalent to the pixel pitch on a display screen, whereas the optical resolution of a display screen is equivalent to temporal uncertainty. Note that both this form of image space and time resolutions are orthogonal to measurement resolution, even though space and time are also orthogonal to each other. Both an image or an oscilloscope capture can have a signal-to-noise ratio, since both also have measurement resolution. === Oscilloscopy === An oscilloscope is the temporal equivalent of a microscope, and it is limited by temporal uncertainty the same way a microscope is limited by optical resolution. A digital sampling oscilloscope has also a limitation analogous to image resolution, which is the sample rate. A non-digital non-sampling oscilloscope is still limited by temporal uncertainty. The temporal uncertainty can be related to the maximum frequency of continuous signal the oscilloscope could respond to, called the bandwidth and given in Hertz. But for oscilloscopes, this figure is not the temporal resolution. To reduce confusion, oscilloscope manufacturers use 'Sa/s' instead of 'Hz' to specify the temporal resolution. Two cases for oscilloscopes exist: either the probe settling time is much shorter than the real time sampling rate, or it is much larger. The case where the settling time is the same as the sampling time is usually undesirable in an oscilloscope. It is more typical to prefer a larger ratio either way, or if not, to be somewhat longer than two sample periods. In the case where it is much longer, the most typical case, it dominates the temporal resolution. The shape of the response during the settling time also has as strong effect on the temporal resolution. For this reason probe leads usually offer an arrangement to 'compensate' the leads to alter the trade off between minimal settling time, and minimal overshoot. If it is much shorter, the oscilloscope may be prone to aliasing from radio frequency interference, but this can be removed by repeatedly sampling a repetitive signal and averaging the results together. If the relationship between the 'trigger' time and the sample clock can be controlled with greater accuracy than the sampling time, then it is possible to make a measurement of a repetitive waveform with much higher temporal resolution than the sample period by upsampling each record before averaging. In this case the temporal uncertainty may be limited by clock jitter.

  Read more →
• 

  Media preservation

  Preservation of documents, pictures, recordings, digital content, etc., is a major aspect of archival science. It is also an important consideration for people who are creating time capsules, family history, historical documents, scrapbooks and family trees. Common storage media are not permanent, and there are few reliable methods of preserving documents and pictures for the future. == Paper/prints (photos) == Color negatives and ordinary color prints may fade away to nothing in a relatively short period if not stored and handled properly. This happens even if the negatives and prints are kept in the dark, because ambient light is not the determining factor, but heat and humidity are. The color degradation is the result of the dyes used in the color processes. Because color processing results in a less stable image than traditional black-and-white processing, black-and-white pictures from the 1920s are more likely to survive long-term than color films and photographs from after the middle 20th century. Black-and-white photographic films using silver halide emulsions are the only film types that have proven to last for archival storage. The determining factors for longevity include the film base type, proper processing (develop, stop, fix and wash) and proper storage. Early films used a Cellulose nitrate base which was prone to decomposition and highly flammable. Nitrate film was replaced with acetate-base films. These Cellulose acetate films were later discovered to outgass acids (also referred to as vinegar syndrome). Acetate films were replaced in the early 1980s by polyester film base materials which have been determined to be more stable than film stocks with a nitrate or acetate base. Color prints made on most inkjet printers look very good at first but they have a very short lifespan, measured in months rather than in years. Even prints from commercial photo labs will start to fade in a matter of years if not processed properly and stored in cool, dry environments. == Documents/books == With documents for which the media are not so critical as what the documents contain, the information in documents can be copied by using photocopiers and image scanners. Books and manuscripts can also have their information saved without destruction by using a book scanner. Where the medium itself needs to be preserved, for example if a document is a crayon sketch by a famous artist on paper, a complex process of preservation may be used. Depending on the condition and importance of the item this can include gluing the media onto more stable media, or protective enclosing of the media. Polyester sleeves, acid-free folders, and pH buffered document boxes are common supportive protective enclosures whose selection must match the media's chemical and physical properties. Other considerations in preserving paper/books are: Damaging light, particularly UV light, which fades and destroys media over time by breaking down the molecules. Atmosphere contains small traces of sulfur dioxide and nitric acid which turn media yellow and break the fibers down. Humidity and moisture also aid in the breakdown of media. If there is too much, the document can be attacked by bacteria, and if too little, cellulose material breaks down. Temperature, particularly elevated ones, can destroy some media. Low temperatures can cause the water to form crystals which expands destroying the structure of paper-based documents. == Online photo albums == Although there are many websites that allow the upload of photographs and videos, digital preservation for the long-term is still considered an issue. There is a lack of confidence that such websites are capable of storing data for long periods of time (ex. 50 years) without data degradation or loss. == Optical media - CD, DVD, Blu-ray, M-Disc == Write-once optical media, such as CD-Rs and DVD-Rs, typically contain an organic dye that distinguishes data reading from data writing based on the dye's transparency along the disc. Conventional CDs and DVDs have finite shelf-life due to natural degradation of the dye; the newer M-DISC uses inorganic material technology to produce molded DVDs and Blu-Rays (up to 3-layer 100GB BDXL) with a claimed lifespan of 100-1000 years if stored correctly with most BD & BDXL rated read/writers enabling the higher power mode for the M-Disc format after 2011. The National Archives and Records Administration lists published life expectancies to be 10 or 25 years or more for normal CDs and DVDs and conservative life expectancies to be between 2 and 5 years. Storage environments, such as temperature and humidity, as well as handling conditions such as frequency of media use and compatibility between the recorder and media, affect media shelf-life. Improvements in media storage and migrations to new recording technologies can make certain formats obsolete within their respective lifespan. Technologists have pointed to internet streaming services, where services such as video-on-demand have contributed to the 33 percent decline in DVD sales the past 5 years, as a challenge for digital preservation. == Magnetic media - video cassettes, tapes, hard drives == Magnetic media such as audio and video tape and floppy disks also have limited life spans. Audio and video tapes require specific care and handling to ensure that the recorded information will be preserved. For information that must be preserved indefinitely, periodic transcription from old media to new ones is necessary, not only because the media are unstable but also because the recording technology may become obsolete. Magnetic media also deteriorates naturally with typical shelf lives between 10 and 20 years. Magnetic tape can degrade from binder hydrolysis or magnetic remanence decay. Binder hydrolysis, also known as sticky-shed syndrome, refers to the breakdown of binder, or glue, that holds the magnetic particles to the polyester base of the tape. Tapes which have been stored in hot, humid conditions are particularly vulnerable to this phenomenon and may suffer from accelerated degradation. Severe binder can cause the magnetic material to fall off or sheds from the base, leaving a pile of dust and clear backing. Archivists can bake the tape, which evaporates water molecules on the tape, to temporarily restore the binder before making a copy. Magnetic tape can also be destabilized by magnetic remanence decay, which refers to the weakening of the tape's magnetization over time. This weakens the affected tape's readability, leading to reduced sound clarity and volume or picture hue and contrast. Baking the tape will not restore magnetization. Media at risk include recorded media such as master audio recordings of symphonies and videotape recordings of the news gathered over the last 40 years. Threats to media that must be considered when archiving important record media include accidental erasure, physical loss due to disasters such as fires and floods, and media degradation. Along with the actual media being degraded over the years, the machines that are available to play back or reproduce the audio sources are becoming archaic themselves. Manufacturers and their support (parts, technical updates) for their machines have disappeared throughout the years. Even if the medium is vaulted and archived correctly, the mechanical properties of the machines have deteriorated to the point that they could do more harm than good to the tape being played. Many major film studios are now backing up their libraries by converting them to electronic media files, such as .AIFF or .WAV-based files via digital audio workstations. That way, even if the digital platform manufacturer goes out of business or no longer supports their product, the files can still be played on any common computer. There is a detailed process that must take place previous to the final archival product now that a digital solution is in place. Sample rates and their conversion and reference speed are both critical in this process. In floppy disks, the lubricants inside the plastic jackets of many older floppies promote the decay of the magnetic medium. Also, the alignment of the magnetic particles of the disk substrate may gradually degrade, leading to a loss of formatting and data. Early laser disk media were prone to degradation as the layers of the disk substrate were bonded with an adhesive that was vulnerable to decay and would crumble over time. This would lead the different layers of the disk to peel apart, damaging the pitted data surface and rendering the disk unreadable.

  Read more →
• 

  Open-source robotics

  Open-source robotics is a branch of robotics where robots are developed with open-source hardware and free and open-source software, publicly sharing blueprints, schematics, and source code. It is thus closely related to the open design movement, the maker movement and open science. == Requirements == Open source robotics means that information about the hardware is easily discerned, so that others can easily rebuild it. In turn, this requires design to use only easily available standard subcomponents and tools, and for the build process to be documented in detail including a bill of materials and detailed ('Ikea style') step-by-step building and testing instructions. (A CAD file alone is not sufficient, as it does not show the steps for performing or testing the build). These requirements are standard to open source hardware in general, and are formalised by various licences, certifications, especially those defined by the peer-reviewed journals Journal of Open Hardware and HardwareX. Licensing requirements for software are the same as for any open source software. But in addition, for software components to be of practical use in real robot systems, they need to be compatible with other software, usually as defined by some robotics middleware community standard. == Hardware systems == Applications to date include: Robot arms, e.g. PARA or Thor Wheeled mobile robots. e.g. OpenScout Four-legged robots such as the Open Dynamic Robot Initiative UAV quadcopters (drones) such as Agilicious Humanoid robots, e.g. iCub, Berkeley Humanoid Lite Self-driving cars, e.g. OpenPodcar (→ Personal rapid transit) Submersible robots, eg. OpenFish Laboratory robotics such as chemical liquid handling Vertical farming Swarm robots, e.g. HeRoSwarm Domestic tasks: vacuum cleaning, floor washing and grass mowing Robot sports including robot combat and autonomous racing Education == Hardware subcomponents == Most open source hardware definitions allow non-open subcomponents to be used in modular design, as long as they are easily available. However many designs try to push openness down into as many subcomponents as possible, with the aim of ultimately reaching fully open designs. Open hardware manual-drive vehicles and their subcomponents, such as from Open Source Ecology, are often used as starting points and extended with automation systems. Open subcomponents can include open-source computing hardware as subcomponents, such as Arduino and RISC-V, as well as open source motors and drivers such as the Open Source Motor Controller and ODrive. Open hardware robotics interface boards can simplify interfacing between middleware software and physical hardware. == Software subcomponents == === Middleware === Robotics middleware is software which links multiple other software components together. In robotics, this specifically means real-time communication systems with standardized message passing protocols. The predominant open source middleware is ROS2, the robot operating system, now as version 2. Other alternatives include ROS1, YARP — used in the iCub, URBI, and Orca. Open source middleware is usually run on an open source operating system, especially the Ubuntu distribution of Linux. === Driver software === Most robot sensors and actuators require software drivers. There is little standardization of open source software at this level, because each hardware device is different. Creating open drivers for closed hardware is difficult as it requires both low level programming and reverse engineering. === Simulation software === Open source robotics simulators include Gazebo, MuJoCo and Webots. Open source 3D game engines such as Godot are also sometimes used as simulators, when equipped with suitable middleware interfaces. === Automation software === At the level of AI, many standard algorithms have open source software implementations, mostly in ROS2. Major components include: Machine vision systems such as the YOLO object detector. 3D photogrammetry Navigation including SLAM and planning such as nav2 Arm inverse kinematics such as moveIt2 == Community == The first signs of the increasing popularity of building and sharing robot designs were found with the maker culture community. What began with small competitions for remote operated vehicles (e.g. Robot combat), soon developed to the building of autonomous telepresence robots such as Sparky and then true robots (being able to take decisions themselves) as the Open Automaton Project. Several commercial companies now also produce kits for making simple robots. The community has adopted open source hardware licenses, certifications, and peer-reviewed publications, which check that source has been made correctly and permanently available under community definitions, and which validate that this has been done. These processes have become critically important due to many historical projects claiming to be open source but them reverting on the promise due to commercialisation or other pressures. As with other forms of open source hardware, the community continues to debate precise criteria for 'ease of build'. A common standard is that designs should be buildable by a technical university student, in a few days, using typical fablab tools, but definitions of all of these subterms can also be debated. Compared to other forms of open source hardware, open source robotics typically includes a large software element, so involves software as well as hardware engineers. Open source concepts are more established in open source software than hardware, so robotics is a field in which those concepts can be shared and transferred from software to hardware. While the community in open source robotics is multi-faceted with a wide range of backgrounds, a sizable sub-community uses the ROS middleware and meets at the ROSCon conferences to discuss development of ROS itself and automation components built on it.

  Read more →
• 

  Mixvoip

  Mixvoip S.A. is a Luxembourg-based telecommunications service provider founded in 2008. The company offers IP telephony, high-speed Internet connectivity, and IT solutions to businesses and individuals. == Company history == In November 2017, Mixvoip expanded its operations to Belgium and Germany. At the beginning of 2019, the company acquired the telecommunications provider Voipgate. In December 2019, Mixvoip was named Telecom Company of the Year at the Luxembourg ICT Awards 2019 organized by Farvest and IT One. A 2024 article in Duke described the company's transition during the 2010s from traditional telephony services to cloud-based communication platforms. In the end of 2024, the ILR published the statistics about electronic communications in Luxembourg, including Mixvoip in the fix telephony section. In July 2025, Mixvoip acquired Crossing Telecom. In 2026, Mixvoip acquired Nomado's portfolio.

  Read more →
• 

  Mean opinion score

  Mean opinion score (MOS) is a measure used in the domain of Quality of Experience and telecommunications engineering, representing overall quality of a stimulus or system. It is the arithmetic mean over all individual "values on a predefined scale that a subject assigns to his opinion of the performance of a system quality". Such ratings are usually gathered in a subjective quality evaluation test, but they can also be algorithmically estimated. MOS is a commonly used measure for video, audio, and audiovisual quality evaluation, but not restricted to those modalities. ITU-T has defined several ways of referring to a MOS in Recommendation ITU-T P.800.1, depending on whether the score was obtained from audiovisual, conversational, listening, talking, or video quality tests. == Rating scales and mathematical definition == The MOS is expressed as a single rational number, typically in the range 1–5, where 1 is lowest perceived quality, and 5 is the highest perceived quality. Other MOS ranges are also possible, depending on the rating scale that has been used in the underlying test. The Absolute Category Rating scale is very commonly used, which maps ratings between Bad and Excellent to numbers between 1 and 5, as seen in below table. Other standardized quality rating scales exist in ITU-T Recommendations (such as ITU-T P.800 or ITU-T P.910). For example, one could use a continuous scale ranging between 1–100. Which scale is used depends on the purpose of the test. In certain contexts there are no statistically significant differences between ratings for the same stimuli when they are obtained using different scales. The MOS is calculated as the arithmetic mean over single ratings performed by human subjects for a given stimulus in a subjective quality evaluation test. Thus: M O S = ∑ n = 1 N R n N {\displaystyle MOS={\frac {\sum _{n=1}^{N}{R_{n}}}{N}}} Where R {\displaystyle R} are the individual ratings for a given stimulus by N {\displaystyle N} subjects. == Properties of the MOS == The MOS is subject to certain mathematical properties and biases. In general, there is an ongoing debate on the usefulness of the MOS to quantify Quality of Experience in a single scalar value. When the MOS is acquired using a categorical rating scales, it is based on – similar to Likert scales – an ordinal scale. In this case, the ranking of the scale items is known, but their interval is not. Therefore, it is mathematically incorrect to calculate a mean over individual ratings in order to obtain the central tendency; the median should be used instead. However, in practice and in the definition of MOS, it is considered acceptable to calculate the arithmetic mean. It has been shown that for categorical rating scales (such as ACR), the individual items are not perceived equidistant by subjects. For example, there may be a larger "gap" between Good and Fair than there is between Good and Excellent. The perceived distance may also depend on the language into which the scale is translated. However, there exist studies that could not prove a significant impact of scale translation on the obtained results. Several other biases are present in the way MOS ratings are typically acquired. In addition to the above-mentioned issues with scales that are perceived non-linearly, there is a so-called "range-equalization bias": subjects, over the course of a subjective experiment, tend to give scores that span the entire rating scale. This makes it impossible to compare two different subjective tests if the range of presented quality differs. In other words, the MOS is never an absolute measure of quality, but only relative to the test in which it has been acquired. For the above reasons – and due to several other contextual factors influencing the perceived quality in a subjective test – a MOS value should only be reported if the context in which the values have been collected in is known and reported as well. MOS values gathered from different contexts and test designs therefore should not be directly compared. Recommendation ITU-T P.800.2 prescribes how MOS values should be reported. Specifically, P.800.2 says:it is not meaningful to directly compare MOS values produced from separate experiments, unless those experiments were explicitly designed to be compared, and even then the data should be statistically analysed to ensure that such a comparison is valid. == MOS for speech and audio quality estimation == MOS historically originates from subjective measurements where listeners would sit in a "quiet room" and score a telephone call quality as they perceived it. This kind of test methodology had been in use in the telephony industry for decades and was standardized in Recommendation ITU-T P.800. It specifies that "the talker should be seated in a quiet room with volume between 30 and 120 m³ and a reverberation time less than 500 ms (preferably in the range 200–300 ms). The room noise level must be below 30 dBA with no dominant peaks in the spectrum." Requirements for other modalities were similarly specified in later ITU-T Recommendations. == MOS estimation using quality models == Obtaining MOS ratings may be time-consuming and expensive as it requires the recruitment of human assessors. For various use cases such as codec development or service quality monitoring purposes – where quality should be estimated repeatedly and automatically – MOS scores can also be predicted by objective quality models, which typically have been developed and trained using human MOS ratings. A question that arises from using such models is whether the MOS differences produced are noticeable to the users. For example, when rating images on a five point MOS scale, an image with a MOS equal to 5 is expected to be noticeably better in quality than one with a MOS equal to 1. Contrary to that, it is not evident whether an image with a MOS equal to 3.8 is noticeably better in quality than one with a MOS equal to 3.6. Research conducted on determining the smallest MOS difference that is perceptible to users for digital photographs showed that a MOS difference of approximately 0.46 is required in order for 75% of the users to be able to detect the higher quality image. Nevertheless, image quality expectation, and hence MOS, changes over time with the change of user expectations. As a result, minimum noticeable MOS differences determined using analytical methods such as in may change over time.

  Read more →
• 

  History of operating systems

  Computer operating systems (OSes) provide a set of functions needed and used by most application programs on a computer, and the links needed to control and synchronize computer hardware. On the first computers, with no operating system, every program needed the full hardware specification to run correctly and perform standard tasks, and its own drivers for peripheral devices like printers and punched paper card readers. The growing complexity of hardware and application programs eventually made operating systems a necessity for everyday use. == Background == Early computers lacked any form of operating system. Instead, the user (rarely also the computer operator), had sole use of the machine for a scheduled period of time. The user would deliver his program to a computer operator who would be responsible for loading the computer with the program and data needed for its 'run'. Eventually, the end of a user's program could be detected and a control program automatically loaded which would load the next user's program, relieving the operator of having to load in each user's program individually and introducing the era of 'batched' programming. That is, a number of user programs could all be loaded together in a batch. Loading of program and data was accomplished in various ways including toggle switches (only used by a user on the earliest of computers, but later used by the computer operator to control the computer, e.g., to start it up, to shut it down, to 'pause', to 'dump' its RAM contents, and/or to control its input and/or its output), punched paper cards and magnetic or paper tape. Once loaded, the machine would be set to execute each program singly until that program completed, crashed, exceeded its time limit or went into a(n infinite) loop. In those early days, there were only 'Control Program' units for providing the software necessary to control the computers and ancillary hardware, e.g., for such semi hardware functions as I/O . None of the early 'Control Programs' were sufficiently sophisticated to recognize a looping user program or initiate a recovery action. Detection and recovery from a looping program was another critical operator function and was usually detected by the sound of the looping computer, whereupon the operator would simply initiate a complete dump of the executing program (for later debugging by the programmer) and then load in (or instruct the computer to go on to) the next user's program. Programs could sometimes be debugged via a control panel using dials, toggle switches and panel lights, making it a very manual and error-prone process. But, this was quite rare, since the high cost of even the simplest of the early computers prohibited such exclusive use of a computer by an individual programmer. Almost all program debugging was done away from any computer by the original programmer perusing the program and the dump of its execution obtained, e.g., by the computer operator or automatically by some computer hardware exception detection (such as a timeout, an attempt to divide by zero, or an over or underflow). Programmers then could only very rarely have more than one computer 'run' per day! Symbolic languages, e.g., assemblers and compilers were developed for programmers to translate symbolic program code into machine code that previously would have been hand-encoded. Later machines came with libraries of support code on punched cards or magnetic tape, which would be linked to the user's program to assist in operations such as input and output. This was the genesis of the modern-day operating system; however, machines still ran a single program or job at a time. At Cambridge University in England the job queue was at one time a string from which tapes attached to corresponding job tickets were hung with stationery pegs. == Mainframes == The first operating system used for real work was GM-NAA I/O, produced in 1956 by General Motors' Research division for its IBM 704. Most other early operating systems for IBM mainframes were also produced by customers. Early operating systems were very diverse, with each vendor or customer producing one or more operating systems specific to their particular mainframe computer. Every operating system, even from the same vendor, could have radically different models of commands, operating procedures, and such facilities as debugging aids. Typically, each time the manufacturer brought out a new machine, there would be a new operating system, and most applications would have to be manually adjusted, recompiled, and retested. === Systems on IBM hardware === Building on customer experience and requirements, IBM took on a more active role in developing operating systems for the 709, 1410, 7010, 7040, 7044, 7090 and 7094. IBM also collaborated with universities. The state of affairs continued until the mid 1960s when IBM, already a leading hardware vendor, stopped work on existing systems and put all its effort into developing the System/360 series of machines, all of which used the same instruction and input/output architecture. IBM intended to develop a single operating system for the new hardware, the OS/360. The problems encountered in the development of the OS/360 are legendary, and are described by Fred Brooks in The Mythical Man-Month—a book that has become a classic of software engineering. Because of performance differences across the hardware range and delays with software development, a whole family of operating systems was introduced instead of a single OS/360. IBM wound up releasing a series of stop-gaps followed by two longer-lived operating systems: OS/360 for mid-range and large systems. This was available in three system generation options: PCP for early users and for those without the resources for multiprogramming. MFT for mid-range systems, replaced by MFT-II in OS/360 Release 15/16. This had one successor, OS/VS1, which was discontinued in the 1980s. MVT for large systems. This was similar in most ways to PCP and MFT (most programs could be ported among the three without being re-compiled), but has more sophisticated memory management and a time-sharing facility, TSO. MVT had several successors including the current z/OS. DOS/360 for small System/360 models had several successors including the current z/VSE. It was significantly different from OS/360. IBM maintained full compatibility with the past, so that programs developed in the sixties can still run under z/VSE (if developed for DOS/360) or z/OS (if developed for MFT or MVT) with no change. IBM also developed TSS/360, a time-sharing system for the System/360 Model 67. Overcompensating for their perceived importance of developing a timeshare system, they set hundreds of developers to work on the project. Early releases of TSS were slow and unreliable; by the time TSS had acceptable performance and reliability, IBM wanted its TSS users to migrate to OS/360 and OS/VS2; while IBM offered a TSS/370 PRPQ, they dropped it after 3 releases. Several operating systems for the IBM S/360 and S/370 architectures were developed by third parties, including the Michigan Terminal System (MTS) and MUSIC/SP. === Other mainframe operating systems === Control Data Corporation developed the SCOPE operating systems in the 1960s, for batch processing and later developed the MACE operating system for time sharing, which was the basis for the later Kronos. In cooperation with the University of Minnesota, the Kronos and later the NOS operating systems were developed during the 1970s, which supported simultaneous batch and time sharing use. Like many commercial time sharing systems, its interface was an extension of the DTSS time sharing system, one of the pioneering efforts in timesharing and programming languages. In the late 1970s, Control Data and the University of Illinois developed the PLATO system, which used plasma panel displays and long-distance time sharing networks. PLATO was remarkably innovative for its time; the shared memory model of PLATO's TUTOR programming language allowed applications such as real-time chat and multi-user graphical games. For the UNIVAC 1107, UNIVAC, the first commercial computer manufacturer, produced the EXEC I operating system, and Computer Sciences Corporation developed the EXEC II operating system and delivered it to UNIVAC. EXEC II was ported to the UNIVAC 1108. Later, UNIVAC developed the EXEC 8 operating system for the 1108; it was the basis for operating systems for later members of the family. Like all early mainframe systems, EXEC I and EXEC II were a batch-oriented system that managed magnetic drums, disks, card readers and line printers; EXEC 8 supported both batch processing and on-line transaction processing. In the 1970s, UNIVAC produced the Real-Time Basic (RTB) system to support large-scale time sharing, also patterned after the Dartmouth BASIC system. Burroughs Corporation introduced the B5000 in 1961 with the MCP (Master Control Program) operating system. The B5000

  Read more →
• 

  Fling (social network)

  Fling was a social media app available for IOS and Android. It was founded in 2014 by Marco Nardone and was taken offline in August 2016. == Overview == In 2012, Marco Nardone founded the startup Unii and launched Unii.com, a social network intended for students in the UK. While working on this service, Nardone had the idea for a messaging service where pictures could be sent to strangers in January 2014. The app Fling was then developed and released between March and July 2014. After a month, it already had 375,000 downloads and 180,000 active users on iOS. Users were able to take pictures inside the app and send them to 50 random people all over the world. The recipient could then choose to answer via chat or reply by sending a picture themselves. The app was used by many users as a medium to exchange sexually explicit pictures and for sexting with strangers. This led to the app being removed from the App Store in June 2015. In the 19 days that followed, flings developers rewrote the App almost completely from scratch, working around the clock. The feature to message random strangers was removed, and the app was readmitted into the App Store as a messenger App resembling Snapchat. But the redesigned Application did not have the success of its predecessor. The funding ran out and the parent company Unii went bankrupt. The company was not able to pay their content moderation team anymore, leading to a new surge of pornographic content on the App. Shortly after that, the Social Network was taken offline in August 2016. It has been inactive since. During the 2 years Fling was online, $21 million was raised from investors while generating no revenue at all. Of this $21 million (£16.5m), £5 million came from Nardone's father. == Allegations against CEO == Former employees made multiple allegations against Marco Nardone, the Founder and CEO of Unii and Fling. According to these claims, he behaved erratic and abusive, throwing "things across the office". He hired his girlfriend as the head of human resources to handle issues between him and his staff. Employees who left the company often had "some part of their pay held back". According to the reports, he also spent the money raised from investors irresponsibly, having no clear concept of a budget. Some of that money was used on expensive restaurants in London, a luxurious office for CEO Nardone and advertisements for Fling on Twitter and Facebook. Nardone also spent time partying in Ibiza with two employees, while the developer team in London frantically tried to get Fling back online after it being removed from the App Store. In December 2017 he pleaded guilty to assaulting his girlfriend at a domestic violence court.

  Read more →
• 

  Macroelectronics

  Macroelectronics are flexible electronics that cover a large area. The most visible example of macroelectronics is flat-panel displays. Other emerging applications include rollable display, printable thin film solar cell and electronic skin. Flat-panel displays fabricated on glass substrates are fragile so fabricating directly on flexible substrates, such as polymers is being explored. Displays made on thin polymer substrates can be more rugged than glass. In September 2005, Philips Polymer Vision revealed the world's first prototype of a rollable electronic reader, which can unfold to a 5-inch display and roll back into a pocket-size (100×60×20 mm) device. Thin-film devices on flexible polymer substrates can lend themselves to low-cost fabrication processes (i.e., roll-to-roll printing), resulting in lightweight, rugged and flexible macroelectronic products.

  Read more →
• 

  Digital goods

  Digital goods or e-goods are intangible goods that exist in digital form. Examples are Wikipedia articles; digital media, such as e-books, downloadable music, internet radio, internet television and streaming media; fonts, logos, photos and graphics; digital subscriptions; online ads (as purchased by the advertiser); internet coupons; electronic tickets; electronically treated documentation in many different fields; downloadable software (Digital Distribution) and mobile apps; cloud-based applications and online games; virtual goods used within the virtual economies of online games and communities; community access; workbooks; worksheets; planners; e-learning (online courses); webinars, video tutorials, blog posts; cards; patterns; website themes and templates. == Legal concerns about digital goods == Special legal concerns regarding digital goods include copyright infringement and taxation. Also the question of the ownership (versus licensed use or service only) of purely digital goods is not finally resolved. For instance, the software installers of the digital software distributor gog.com are technically independent to the account but are still subject to the EULA, where a "licensed, not sold" formulation is used. Therefore, it is not clear if the software can be legally used after a hypothetical loss of the account; a question which was also raised before in practice for the similar service Steam. In July 2012, the European Court of Justice ruled in the case UsedSoft GMbH v. Oracle International Corp. that the sale of a software product, either through a physical support or download, constituted a transfer of ownership in EU law, thus the first sale doctrine applies; the ruling thereby breaks the "licensed, not sold" legal theory, but leaves open numerous questions. Therefore, it is also permissible to resell software licenses even if the digital good has been downloaded directly from the Internet, as the first-sale doctrine applied whenever software was originally sold to a customer for an unlimited amount of time, thus prohibiting any software maker from preventing the resale of their software by any of their legitimate owners. The court requires that the previous owner must no longer be able to use the licensed software after the resale, but finds that the practical difficulties in enforcing this clause should not be an obstacle to authorizing resale, as they are also present for software which can be installed from physical supports, where the first-sale doctrine is in force. In several cases, content providers have faced criticism for revoking access to digital goods due to expired licenses or the discontinuation of a product, such as ebooks (which resulted in a lawsuit against Amazon.com, Inc.), digital video (with Sony Interactive Entertainment revoking access to purchased StudioCanal content from its now-defunct PlayStation video store; a similar move involving Warner Bros. Discovery content was averted by an updated license agreement), and video games (such as Ubisoft discontinuing and revoking access to its game The Crew without providing refunds or the ability to redownload the game) In September 2024, the U.S. state of California implemented a consumer protection law that prohibits the use of terms such as "buy" or "purchase" during transactions involving digital goods if there is no way to obtain the purchases in a manner that cannot be revoked by the seller (such as allowing it to be downloaded for permanent, offline access), and requires a disclaimer to be displayed to the customer at the time of purchase.

  Read more →