AI Code Visual Studio

AI Code Visual Studio — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Stencil buffer

  A stencil buffer is an extra data buffer, in addition to the color buffer and Z-buffer, found on modern graphics hardware. The buffer is per pixel and works on integer values, usually with a depth of one byte per pixel. The Z-buffer and stencil buffer often share the same area in the RAM of the graphics hardware. In the simplest case, the stencil buffer is used to limit the area of rendering (stenciling). More advanced usage of the stencil buffer makes use of the strong connection between the Z-buffer and the stencil buffer in the rendering pipeline. For example, stencil values can be automatically increased/decreased for every pixel that fails or passes the depth test. The simple combination of depth test and stencil modifiers make a vast number of effects possible (such as stencil shadow volumes, Two-Sided Stencil, compositing, decaling, dissolves, fades, swipes, silhouettes, outline drawing, or highlighting of intersections between complex primitives) though they often require several rendering passes and, therefore, can put a heavy load on the graphics hardware. The most typical application is still to add shadows to 3D applications. It is also used for planar reflections. Other rendering techniques, such as portal rendering, use the stencil buffer in other ways; for example, it can be used to find the area of the screen obscured by a portal and re-render those pixels correctly. The stencil buffer and its modifiers can be accessed in computer graphics by using APIs like OpenGL, Direct3D, Vulkan or Metal. == Architecture == The stencil buffer typically shares the same memory space as the Z-buffer, and typically the ratio is 24 bits for Z-buffer + 8 bits for stencil buffer or, in the past, 15 bits for Z-buffer + 1 bit for stencil buffer. Another variant is 4 + 24, where 28 of the 32 bits are used and 4 ignored. Stencil and Z-buffers are part of the frame buffer, coupled to the color buffer. The first chip available to a wider market was 3Dlabs' Permedia II, which supported a one-bit stencil buffer. The bits allocated to the stencil buffer can be used to represent numerical values in the range [0, 2n-1], and also as a Boolean matrix (n is the number of allocated bits), each of which may be used to control the particular part of the scene. Any combination of these two ways of using the available memory is also possible. == Stencil test == Stencil test or stenciling is among the operations on the pixels/fragments (Per-pixel operations), located after the alpha test, and before the depth test. The stencil test ensures undesired pixels do not reach the depth test. This saves processing time for the scene. Similarly, the alpha test can prevent corresponding pixels to reach the stencil test. The test itself is carried out over the stencil buffer to some value in it, or altered or used it, and carried out through the so-called stencil function and stencil operations. The stencil function is a function by which the stencil value of a certain pixel is compared to a given reference value. If this comparison is logically true, the stencil test passes. Otherwise not. In doing so, the possible reaction caused by the result of comparing three different state-depth and stencil buffer: Stencil test is not passed Stencil test is passed but not the depth test Both tests are passed (or stencil test is passed, and the depth is not enabled) For each of these cases, different operations can be set over the examined pixel. In the OpenGL stencil functions, the reference value and mask, respectively, define the function glStencilFunc. In Direct3D each of these components is adjusted individually using methods SetRenderState devices currently in control. This method expects two parameters, the first of which is a condition that is set and the other its value. In the order that was used above, these conditions are called D3DRS_STENCILFUNC, D3DRS_STENCILREF, and D3DRS_STENCILMASK. Stencil operations in OpenGL adjust glStencilOp function that expects three values. In Direct3D, again, each state sets a specific method SetRenderState. The three states that can be assigned to surgery are called D3DRS_STENCILFAIL, D3DRENDERSTATE_STENCILZFAIL, and D3DRENDERSTATE_STENCILPASS. == Z-fighting == Due to the lack of precision in the Z-buffer, coplanar polygons that are short-range, or overlapping, can be portrayed as a single plane with a multitude of irregular cross-sections. These sections can vary depending on the camera position and other parameters and are rapidly changing. This is called Z-fighting. There exist multiple solutions to this issue: - Bring the far plane closer to restrict the scene's depth, thus increasing the accuracy of the Z-buffer, or reducing the distance at which objects are visible in the scene. - Increase the number of bits allocated to the Z-buffer, which is possible at the expense of memory for the stencil buffer. - Move polygons farther apart from one another, which restricts the possibilities for the artist to create an elaborate scene. All of these approaches to the problem can only reduce the likelihood that the polygons will experience Z-fighting, and do not guarantee a definitive solution in the general case. A solution that includes the stencil buffer is based on the knowledge of which polygon should be in front of the others. The silhouette of the front polygon is drawn into the stencil buffer. After that, the rest of the scene can be rendered only where the silhouette is negative, and so will not clash with the front polygon. == Shadow volume == Shadow volume is a technique used in 3D computer graphics to add shadows to a rendered scene. They were first proposed by Frank Crow in 1977 as the geometry describing the 3D shape of the region occluded from a light source. A shadow volume divides the virtual world in two: areas that are in shadow and areas that are not. The stencil buffer implementation of shadow volumes is generally considered among the most practical general-purpose real-time shadowing techniques for use on modern 3D graphics hardware. It has been popularised by the video game Doom 3, and a particular variation of the technique used in this game has become known as Carmack's Reverse. == Reflections == Reflection of a scene is drawn as the scene itself transformed and reflected relative to the "mirror" plane, which requires multiple render passes and using of stencil buffer to restrict areas where the current render pass works: Draw the scene excluding mirror areas – for each mirror lock the Z-buffer and color buffer Render visible part of the mirror Depth test is set up so that each pixel is passed to enter the maximum value and always passes for each mirror: Depth test is set so that it passes only if the distance of a pixel is less than the current (default behavior) The matrix transformation is changed to reflect the scene relative to the mirror plane Unlock the Z-buffer and color buffer Draw the scene, but only the part of it that lies between the mirror plane and the camera. In other words, a mirror plane is also a clipping plane Again locks color buffer, depth test is set so that it always passes, reset stencil for the next mirror. == Planar Shadows == While drawing a plane of shadows, there are two dominant problems: The first concerns the problem of deep struggle in case the flat geometry is not awarded on the part covered with the shadow of shadows and outside. See the section that relates to this. Another problem relates to the extent of the shadows outside the area where the plane there. Another problem, which may or may not appear, depending on the technique, the design of more polygons in one part of the shadow, resulting in darker and lighter parts of the same shade. All three problems can be solved geometrically, but because of the possibility that hardware acceleration is directly used, it is a far more elegant implementation using the stencil buffer: 1. Enable lights and the lights 2. Draw a scene without any polygon that should be projected shadows 3. Draw all polygons which should be projected shadows, but without lights. In doing so, the stencil buffer, the pixel of each polygon to be assigned to a specific value for the ground to which they belong. The distance between these values should be at least two, because for each plane to be used two values for two states: in the shadows and bright. 4. Disable any global illumination (to ensure that the next steps will affect only individual selected light) For each plane: For each light: 1. Edit a stencil buffer and only the pixels that carry a specific value for the selected level. Increase the value of all the pixels that are projected objects between the date of a given level and bright. 2. Allow only selected light for him to draw level at which part of her specific value was not changed. == Spatial shadows == Stencil buffer implementation of spatial drawing shadows is any shadow of a geometric body that its volume includes part of the scene that is

  Read more →
• 

  Information Rules

  Information Rules is a 1999 book by Carl Shapiro and Hal Varian applying traditional economic theories to modern information-based technologies. The book examines commercial strategies appropriate to companies that deal in information, given the high "first copy" and low "subsequent copy" costs of information commodities, such as music CDs or original texts. == Content == The book examines competing standards, and how a company might influence widespread consumer acceptance of one over another, such as VHS versus Betamax, or HD DVD versus Blu-ray. The book mentions possible business strategies of such publishers as Encyclopædia Britannica who have to confront how to stay viable as technology changes the value and availability of information.

  Read more →
• 

  Sieve of Eratosthenes

  In mathematics, the sieve of Eratosthenes is an ancient algorithm for finding all prime numbers up to any given limit. It does so by iteratively marking as composite (i.e., not prime) the multiples of each prime, starting with the first prime number, 2. The multiples of a given prime are generated as a sequence of numbers starting from that prime, with constant difference between them that is equal to that prime. This is the sieve's key distinction from using trial division to sequentially test each candidate number for divisibility by each prime. Once all the multiples of each discovered prime have been marked as composites, the remaining unmarked numbers are primes. The earliest known reference to the sieve (Ancient Greek: κόσκινον Ἐρατοσθένους, kóskinon Eratosthénous) is in Nicomachus of Gerasa's Introduction to Arithmetic, an early 2nd-century CE book which attributes it to Eratosthenes of Cyrene, a 3rd-century BCE Greek mathematician, though describing the sieving by odd numbers instead of by primes. One of a number of prime number sieves, it is one of the most efficient ways to find all of the smaller primes. It may be used to find primes in arithmetic progressions. == Overview == A prime number is a natural number that has exactly two distinct natural number divisors: the number 1 and itself. To find all the prime numbers less than or equal to a given integer n by Eratosthenes's method: Create a list of consecutive integers from 2 through n: (2, 3, 4, ..., n). Initially, let p equal 2, the smallest prime number. Enumerate the multiples of p by counting in increments of p from 2p to n, and mark them in the list (these will be 2p, 3p, 4p, ...; the p itself should not be marked). Find the smallest number in the list greater than p that is not marked. If there was no such number, stop. Otherwise, let p now equal this new number (which is the next prime), and repeat from step 3. When the algorithm terminates, the numbers remaining not marked in the list are all the primes below n. The main idea here is that every value given to p will be prime, because if it were composite it would be marked as a multiple of some other, smaller prime. Note that some of the numbers may be marked more than once (e.g., 15 will be marked both for 3 and 5). The key property of the sieve is that only additions are needed, no multiplications or divisions are used. As a refinement, it is sufficient to mark the numbers in step 3 starting from p2, as all the smaller multiples of p will have already been marked at that point. This means that the algorithm is allowed to terminate in step 4 when p2 is greater than n. Another refinement is to initially list odd numbers only, (3, 5, ..., n), and count in increments of 2p in step 3, thus marking only odd multiples of p. This actually appears in the original algorithm. This can be generalized with wheel factorization, forming the initial list only from numbers coprime with the first few primes and not just from odds (i.e., numbers coprime with 2), and counting in the correspondingly adjusted increments so that only such multiples of p are generated that are coprime with those small primes, in the first place. === Example === To find all the prime numbers less than or equal to 30, proceed as follows. First, generate a list of natural numbers from 2 to 30: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 The first number in the list is 2; cross out every 2nd number in the list after 2 by counting up from 2 in increments of 2 (these will be all the multiples of 2 in the list): 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 The next number in the list after 2 is 3; cross out every 3rd number in the list after 3 by counting up from 3 in increments of 3 (these will be all the multiples of 3 in the list): 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 The next number not yet crossed out in the list after 3 is 5; cross out every 5th number in the list after 5 by counting up from 5 in increments of 5 (i.e. all the multiples of 5): 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 The next number not yet crossed out in the list after 5 is 7; the next step would be to cross out every 7th number in the list after 7, but they are all already crossed out at this point, as these numbers (14, 21, 28) are also multiples of smaller primes because 7 × 7 is greater than 30. The numbers not crossed out at this point in the list are all the prime numbers below 30: 2 3 5 7 11 13 17 19 23 29 == Algorithm and variants == === Pseudocode === The sieve of Eratosthenes can be expressed in pseudocode, as follows: algorithm Sieve of Eratosthenes is input: an integer n > 1. output: all prime numbers from 2 through n. let A be an array of Boolean values, indexed by integers 2 to n, initially all set to true. for i = 2, 3, 4, ..., not exceeding √n do if A[i] is true for j = i2, i2+i, i2+2i, i2+3i, ..., not exceeding n do set A[j] := false return all i such that A[i] is true. This algorithm produces all primes not greater than n. It includes a common optimization, which is to start enumerating the multiples of each prime i from i2. The time complexity of this algorithm is O(n log log n), provided the array update is an O(1) operation, as is usually the case. === Segmented sieve === As Sorenson notes, the problem with the sieve of Eratosthenes is not the number of operations it performs but rather its memory requirements. For large n, the range of primes may not fit in memory; worse, even for moderate n, its cache use is highly suboptimal. The algorithm walks through the entire array A, exhibiting almost no locality of reference. A solution to these problems is offered by segmented sieves, where only portions of the range are sieved at a time. These have been known since the 1970s, and work as follows: Divide the range 2 through n into segments of some size Δ ≥ √n. Find the primes in the first (i.e. the lowest) segment, using the regular sieve. For each of the following segments, in increasing order, with m being the segment's topmost value, find the primes in it as follows: Set up a Boolean array of size Δ. Mark as non-prime the positions in the array corresponding to the multiples of each prime p ≤ √m found so far, by enumerating its multiples in steps of p starting from the lowest multiple of p between m - Δ and m. The remaining non-marked positions in the array correspond to the primes in the segment. It is not necessary to mark any multiples of these primes, because all of these primes are larger than √m, as for k ≥ 1, one has ( k Δ + 1 ) 2 > ( k + 1 ) Δ {\displaystyle (k\Delta +1)^{2}>(k+1)\Delta } . If Δ is chosen to be √n, the space complexity of the algorithm is O(√n), while the time complexity is the same as that of the regular sieve. For ranges with upper limit n so large that the sieving primes below √n as required by the page segmented sieve of Eratosthenes cannot fit in memory, a slower but much more space-efficient sieve like the pseudosquares prime sieve, developed by Jonathan P. Sorenson, can be used instead. === Incremental sieve === An incremental formulation of the sieve generates primes indefinitely (i.e., without an upper bound) by interleaving the generation of primes with the generation of their multiples (so that primes can be found in gaps between the multiples), where the multiples of each prime p are generated directly by counting up from the square of the prime in increments of p (or 2p for odd primes). The generation must be initiated only when the prime's square is reached, to avoid adverse effects on efficiency. It can be expressed symbolically under the dataflow paradigm as primes = [2, 3, ...] \ [[p², p²+p, ...] for p in primes], using list comprehension notation with \ denoting set subtraction of arithmetic progressions of numbers. Primes can also be produced by iteratively sieving out the composites through divisibility testing by sequential primes, one prime at a time. It is not the sieve of Eratosthenes but is often confused with it, even though the sieve of Eratosthenes directly generates the composites instead of testing for them. Trial division has worse theoretical complexity than that of the sieve of Eratosthenes in generating ranges of primes. When testing each prime, the optimal trial division algorithm uses all prime numbers not exceeding its square root, whereas the sieve of Eratosthenes produces each composite from its prime factors only, and gets the primes "for free", between the composites. The widely known 1975 functional sieve code by David Turner is often presented as an example of the sieve of Eratosthenes but is actually a sub-optimal trial division sieve. == Algorithmic complexity == The sieve of Eratosthenes is a popular way to benchmark computer performance. The time complexity of calculating all primes below n in the random access machine model is O(n log log n) ope

  Read more →
• 

  Organizational information theory

  Organizational Information Theory (OIT) is a communication theory, developed by Karl Weick, offering systemic insight into the processing and exchange of information within organizations and among its members. Unlike the past structure-centered theory, OIT focuses on the process of organizing in dynamic, information-rich environments. Given that, it contends that the main activity of organizations is the process of making sense of equivocal information. Organizational members are instrumental to reduce equivocality and achieve sensemaking through some strategies — enactment, selection, and retention of information. With a framework that is interdisciplinary in nature, organizational information theory's desire to eliminate both ambiguity and complexity from workplace messaging builds upon earlier findings from general systems theory and phenomenology. == Inspiration and influence of pre-existing theories == 1. General Systems Theory The General Systems Theory, on its most basic premise, describes the phenomenon of a cohesive group of interrelated parts. When one part of the system is changed or affected, it will affect the system as a whole. Weick uses this theoretical framework from 1950 to influence his organizational information theory. Likewise, organizations can be viewed as a system of related parts that work together towards a common goal or vision. Applying this to Weick's organizational information theory, organizations must work to reduce ambiguity and complexity in the workplace to maximize cohesiveness and efficiency. Weick uses the term, coupling, to describe how organizations, like a system, can be composed of interrelated and dependent parts. Coupling looks at the relationship between people and work. There are two types of coupling: 1. Loose coupling Loose coupling describes that while people within the organization or system are connected and often work together, they do not depend on one another to continue or fully complete individual work. The dependencies are weak and workflow is flexible. For example, "if the whole Science department completely shuts down because all of teachers are sick or for whatsoever reason, the school can still continue to operate because other departments are still present." 2. Tight coupling Tight coupling describes when connections within an organization are strong and dependent. If one part of the organization is not operating correctly, the organization as a whole cannot continue to their fullest potential. " For instance, the format and ink section completely shuts down hence the succeeding steps cannot be continued, so the whole process of the organization will be dropped. Thus, components of a system are directly dependent on one another." 2. Theory of evolution The theory of evolution, by Charles Darwin, is a framework for survival of the fittest. According to Darwin, organisms attempt to adapt and live in an unforgiving environment. Those that are unsuccessful in adaptation do not survive, while the strong organisms continue to thrive and reproduce. Weick invokes inspiration from Darwin, to incorporate a biological perspective to his theory. It is natural for organizations to have to adapt to incoming information that often interfere with the preexisting environment. Organizations that are able to plan and alter strategies in accordance with their constant need of organizing and sense making, will survive and be the most successful. However, there is a notable difference between animal evolution and survival of the fittest in organizations, "A given animal is what it is; variation comes through mutation. But the nature of an organization can change when its members alter their behavior." == Assumptions == 1. Human organizations exist in an information environment Unlike senders and receivers models, OIT stands on the situational perspective. Karl Weick views a human organization as an open social system. People in that system develop a mechanism to establish goals, obtain and process information, or perceive the environment. In this process, people and the environment come to conclusions on "what's going on here?". Colville believes that this attributional process is retrospective. Take an education institution as an example. A university can obtain information regarding students' needs in numerous ways. It might create feedback section in its website. It could organize alumni panels or academic affairs to attract prospective students and collect concrete questions they are interested in. It may also conduct the survey or host focus group to get the information. After that, the staff of the university have to decide how to deal with these information, based on which, it has to set and accomplish its goals for current and prospective students. 2. The information an organization receives differs in terms of equivocality Weick posits that numerous feasible interpretations of reality exist when organizations process information. Their varying levels of understandability lead to different outcomes of information inputs. In other academic works, scholars tend to say that messages are uncertain or ambiguous. While according to OIT, messages are described to be equivocal. believes that people proactively exclude a number of possibilities to perceive what is going on in the environment. Due to OIT's situational perspective, the meanings of messages consist of the messages, the interpretations of receivers, and the interactional context. However, ambiguity and uncertainty can mean that a standard answer - the only one true objective interpretation - exists. Also, Weick emphasizes that "the equivocality is the engine that motivates people to organize". Maitlis and Christianson states that the equivocality trigger sensemaking for three reasons: environment jolts and organizational crises, threats to identity, and planned change interventions. 3. Human organizations engage in information processing to reduce equivocality of information Based upon the first two assumption, OIT proposes that information processing within organizations is a social activity. Sharing is the key feature of organizational information processing. In that particular context, members jointly make sense the reality by reducing equivocality. It other words, the sensemaking is a joint responsibility which includes numerous interdependent people to accomplish. In this process, organizations and its members combine actions and attributions together in order to find the balance between the complexity of thoughts and the simplicity of actions. Weick also proposes that people create their own environment though enactment, which is the action of making sense. This is because people have different perceptual schemas and selective perception, so people create different information environments. In creating different information environments, people can arrive at the same or close to the same understanding or solution through different thought processes and overall understanding. == Key concepts == === The organization === In order to place Weick's vision regarding Organizational Information Theory into proper working context, exploring his view regarding what constitutes the organization and how its individuals embody that construct might yield significant insights. From a fundamental standpoint, he shared a belief that organizational validation is derived---not through bricks and mortar, or locale—but from a series of events which enable entities to "collect, manage and use the information they receive." In elaborating further on what constitutes an organization during early writings outlining OIT, Weick said, "The word organization is a noun and it is also a myth. if one looks for an organization, one will not find it. What will be found is that there are events linked together, that transpire within concrete walls and these sequences, their pathways, their timing, are the forms we erroneously make into substances when we talk about an organization". When viewed in this modular fashion, the organization meets Weick's theoretical vision by encompassing parameters that are less bound by concrete, wood, and structural restraints and more by an ability to serve as a repository where information can be consistently and effectively channeled. Taking these defining characteristics into account, proper channel execution relies on maximization of messaging clarity, context, delivery and evolution through any system. One example as to how these interactions might unfold on a more granular level within these confines can be gleaned through Weick's double interact loop, which he considers the "building blocks of every organization". Simply put, double interacts describe interpersonal exchanges that, inherently, occur across the organizational chain of command and in life, itself. Thus: "An act occurs when you say something (Can I have a Popsicle?). An interact occurs when you say something and I respond ("No, it will spoil your dinner

  Read more →
• 

  You Only Look Once

  You Only Look Once (YOLO) is a series of real-time object detection systems based on convolutional neural networks. First introduced by Joseph Redmon et al. in 2015, YOLO has undergone several iterations and improvements, becoming one of the most popular object detection frameworks. The name "You Only Look Once" refers to the fact that the algorithm requires only one forward propagation pass through the neural network to make predictions, unlike previous region proposal-based techniques like R-CNN that require thousands for a single image. == Overview == Compared to previous methods like R-CNN and OverFeat, instead of applying the model to an image at multiple locations and scales, YOLO applies a single neural network to the full image. This network divides the image into regions and predicts bounding boxes and probabilities for each region. These bounding boxes are weighted by the predicted probabilities. === OverFeat === OverFeat was an early influential model for simultaneous object classification and localization. Its architecture is as follows: Train a neural network for image classification only ("classification-trained network"). This could be one like the AlexNet. The last layer of the trained network is removed, and for every possible object class, initialize a network module at the last layer ("regression network"). The base network has its parameters frozen. The regression network is trained to predict the ( x , y ) {\displaystyle (x,y)} coordinates of two corners of the object's bounding box. During inference time, the classification-trained network is run over the same image over many different zoom levels and croppings. For each, it outputs a class label and a probability for that class label. Each output is then processed by the regression network of the corresponding class. This results in thousands of bounding boxes with class labels and probability. These boxes are merged until only one single box with a single class label remains. == Versions == There are two parts to the YOLO series. The original part contained YOLOv1, v2, and v3, all released on a website maintained by Joseph Redmon. === YOLOv1 === The original YOLO algorithm, introduced in 2015, divides the image into an S × S {\displaystyle S\times S} grid of cells. If the center of an object's bounding box falls into a grid cell, that cell is said to "contain" that object. Each grid cell predicts B bounding boxes and confidence scores for those boxes. These confidence scores reflect how confident the model is that the box contains an object and how accurate it thinks the box is that it predicts. In more detail, the network performs the same convolutional operation over each of the S 2 {\displaystyle S^{2}} patches. The output of the network on each patch is a tuple as follows: ( p 1 , … , p C , c 1 , x 1 , y 1 , w 1 , h 1 , … , c B , x B , y B , w B , h B ) {\displaystyle (p_{1},\dots ,p_{C},c_{1},x_{1},y_{1},w_{1},h_{1},\dots ,c_{B},x_{B},y_{B},w_{B},h_{B})} where p i {\displaystyle p_{i}} is the conditional probability that the cell contains an object of class i {\displaystyle i} , conditional on the cell containing at least one object. x j , y j , w j , h j {\displaystyle x_{j},y_{j},w_{j},h_{j}} are the center coordinates, width, and height of the j {\displaystyle j} -th predicted bounding box that is centered in the cell. Multiple bounding boxes are predicted to allow each prediction to specialize in one kind of bounding box. For example, slender objects might be predicted by j = 2 {\displaystyle j=2} while stout objects might be predicted by j = 1 {\displaystyle j=1} . c j {\displaystyle c_{j}} is the predicted intersection over union (IoU) of each bounding box with its corresponding ground truth. The network architecture has 24 convolutional layers followed by 2 fully connected layers. During training, for each cell, if it contains a ground truth bounding box, then only the predicted bounding boxes with the highest IoU with the ground truth bounding boxes is used for gradient descent. Concretely, let j {\displaystyle j} be that predicted bounding box, and let i {\displaystyle i} be the ground truth class label, then x j , y j , w j , h j {\displaystyle x_{j},y_{j},w_{j},h_{j}} are trained by gradient descent to approach the ground truth, p i {\displaystyle p_{i}} is trained towards 1 {\displaystyle 1} , other p i ′ {\displaystyle p_{i'}} are trained towards zero. If a cell contains no ground truth, then only c 1 , c 2 , … , c B {\displaystyle c_{1},c_{2},\dots ,c_{B}} are trained by gradient descent to approach zero. === YOLOv2 === Released in 2016, YOLOv2 (also known as YOLO9000) improved upon the original model by incorporating batch normalization, a higher resolution classifier, and using anchor boxes to predict bounding boxes. It could detect over 9000 object categories. It was also released on GitHub under the Apache 2.0 license. === YOLOv3 === YOLOv3, introduced in 2018, contained only "incremental" improvements, including the use of a more complex backbone network, multiple scales for detection, and a more sophisticated loss function. === YOLOv4 and beyond === Subsequent versions of YOLO (v4, v5, etc.) have been developed by different researchers, further improving performance and introducing new features. These versions are not officially associated with the original YOLO authors but build upon their work. As of 2026, versions up to YOLO26 have been released..

  Read more →
• 

  Geospatial metadata

  Geospatial metadata (also geographic metadata) is a type of metadata applicable to geographic data and information. Such objects may be stored in a geographic information system (GIS) or may simply be documents, data-sets, images or other objects, services, or related items that exist in some other native environment but whose features may be appropriate to describe in a (geographic) metadata catalog (may also be known as a data directory or data inventory). == Definition == ISO 19115:2013 "Geographic Information – Metadata" from ISO/TC 211, the industry standard for geospatial metadata, describes its scope as follows: [This standard] provides information about the identification, the extent, the quality, the spatial and temporal aspects, the content, the spatial reference, the portrayal, distribution, and other properties of digital geographic data and services. ISO 19115:2013 also provides for non-digital mediums: Though this part of ISO 19115 is applicable to digital data and services, its principles can be extended to many other types of resources such as maps, charts, and textual documents as well as non-geographic data. The U.S. Federal Geographic Data Committee (FGDC) describes geospatial metadata as follows: A metadata record is a file of information, usually presented as an XML document, which captures the basic characteristics of a data or information resource. It represents the who, what, when, where, why and how of the resource. Geospatial metadata commonly document geographic digital data such as Geographic Information System (GIS) files, geospatial databases, and earth imagery but can also be used to document geospatial resources including data catalogs, mapping applications, data models and related websites. Metadata records include core library catalog elements such as Title, Abstract, and Publication Data; geographic elements such as Geographic Extent and Projection Information; and database elements such as Attribute Label Definitions and Attribute Domain Values. == History == The growing appreciation of the value of geospatial metadata through the 1980s and 1990s led to the development of a number of initiatives to collect metadata according to a variety of formats either within agencies, communities of practice, or countries/groups of countries. For example, NASA's "DIF" metadata format was developed during an Earth Science and Applications Data Systems Workshop in 1987, and formally approved for adoption in 1988. Similarly, the U.S. FGDC developed its geospatial metadata standard over the period 1992–1994. The Spatial Information Council of Australia and New Zealand (ANZLIC), a combined body representing spatial data interests in Australia and New Zealand, released version 1 of its "metadata guidelines" in 1996. ISO/TC 211 undertook the task of harmonizing the range of formal and de facto standards over the approximate period 1999–2002, resulting in the release of ISO 19115 "Geographic Information – Metadata" in 2003 and a subsequent revision in 2013. As of 2011 individual countries, communities of practice, agencies, etc. have started re-casting their previously used metadata standards as "profiles" or recommended subsets of ISO 19115, occasionally with the inclusion of additional metadata elements as formal extensions to the ISO standard. The growth in popularity of Internet technologies and data formats, such as Extensible Markup Language (XML) during the 1990s led to the development of mechanisms for exchanging geographic metadata on the web. In 2004, the Open Geospatial Consortium released the current version (3.1) of Geography Markup Language (GML), an XML grammar for expressing geospatial features and corresponding metadata. With the growth of the Semantic Web in the 2000s, the geospatial community has begun to develop ontologies for representing semantic geospatial metadata. Some examples include the Hydrology and Administrative ontologies developed by the Ordnance Survey in the United Kingdom. == ISO 19115: Geographic information – Metadata == ISO 19115 is a standard of the International Organization for Standardization (ISO). The standard is part of the ISO geographic information suite of standards (19100 series). ISO 19115 and its parts define how to describe geographical information and associated services, including contents, spatial-temporal purchases, data quality, access and rights to use. The objective of this International Standard is to provide a clear procedure for the description of digital geographic data-sets so that users will be able to determine whether the data in a holding will be of use to them and how to access the data. By establishing a common set of metadata terminology, definitions and extension procedures, this standard promotes the proper use and effective retrieval of geographic data. ISO 19115 was revised in 2013 to accommodate growing use of the internet for metadata management, as well as add many new categories of metadata elements (referred to as codelists) and the ability to limit the extent of metadata use temporally or by user. == ISO 19139 Geographic information Metadata XML schema implementation == ISO 19139:2012 provides the XML implementation schema for ISO 19115 specifying the metadata record format and may be used to describe, validate, and exchange geospatial metadata prepared in XML. The standard is part of the ISO geographic information suite of standards (19100 series), and provides a spatial metadata XML (spatial metadata eXtensible Mark-up Language (smXML)) encoding, an XML schema implementation derived from ISO 19115, Geographic information – Metadata. The metadata includes information about the identification, constraint, extent, quality, spatial and temporal reference, distribution, lineage, and maintenance of the digital geographic data-set. == Metadata directories == Also known as metadata catalogues or data directories. (need discussion of, and subsections on GCMD, FGDC metadata gateway, ASDD, European and Canadian initiatives, etc. etc.) GIS Inventory – National GIS Inventory System which is maintained by the US-based National States Geographic Information Council (NSGIC) as a tool for the entire US GIS Community. Its primary purpose is to track data availability and the status of geographic information system (GIS) implementation in state and local governments to aid the planning and building of statewide spatial data infrastructures (SSDI). The Random Access Metadata for Online Nationwide Assessment (RAMONA) database is a critical component of the GIS Inventory. RAMONA moves its FGDC-compliant metadata (CSDGM Standard) for each data layer to a web folder and a Catalog Service for the Web (CSW) that can be harvested by Federal programs and others. This provides far greater opportunities for discovery of user information. The GIS Inventory website was originally created in 2006 by NSGIC under award NA04NOS4730011 from the Coastal Services Center, National Oceanic and Atmospheric Administration, U.S. Department of Commerce. The Department of Homeland Security has been the principal funding source since 2008 and they supported the development of the Version 5 during 2011/2012 under Order Number HSHQDC-11-P-00177. The Federal Emergency Management Agency and National Oceanic and Atmospheric Administration have provided additional resources to maintain and improve the GIS Inventory. Some US Federal programs require submission of CSDGM-Compliant Metadata for data created under grants and contracts that they issue. The GIS Inventory provides a very simple interface to create the required Metadata. GCMD - Global Change Master Directory's goal is to enable users to locate and obtain access to Earth science data sets and services relevant to global change and Earth science research. The GCMD database holds more than 20,000 descriptions of Earth science data sets and services covering all aspects of Earth and environmental sciences. ECHO - The EOS Clearing House (ECHO) is a spatial and temporal metadata registry, service registry, and order broker. It allows users to more efficiently search and access data and services through the Reverb Client or Application Programmer Interfaces (APIs). ECHO stores metadata from a variety of science disciplines and domains, totalling over 3400 Earth science data sets and over 118 million granule records. GoGeo - GoGeo is a service run by EDINA (University of Edinburgh) and is supported by Jisc. GoGeo allows users to conduct geographically targeted searches to discover geospatial datasets. GoGeo searches many data portals from the HE and FE community and beyond. GoGeo also allows users to create standards compliant metadata through its Geodoc metadata editor. == Geospatial metadata tools == There are many proprietary GIS or geospatial products that support metadata viewing and editing on GIS resources. For example, ESRI's ArcGIS Desktop, SOCET GXP, Autodesk's AutoCAD Map 3D 2008, Arcitecta's Mediaflux and Intergraph's Geo

  Read more →
• 

  Document capture software

  Document capture software refers to applications that provide the ability and feature set to automate the process of scanning paper documents or importing electronic documents, often for the purposes of feeding advanced document classification and data collection processes. Most scanning hardware, both scanners and copiers, provides the basic ability to scan to any number of image file formats, including: PDF, TIFF, JPG, BMP, etc. This basic functionality is augmented by document capture software, which can add efficiency and standardization to the process. == Typical features == Typical features of Document Capture Software include: Barcode recognition Patch Code recognition Separation Optical Character Recognition (OCR) Optical Mark Recognition (OMR) Quality Assurance Indexing Migration === Goal for implementation of a document capture solution === The goal for implementing a document capture solution is to reduce the amount of time spent scanning, separating, enhancing, organizing, classifying, normalizing, and collecting information from document collections, and to produce metadata along with an image/PDF file, and/or OCR text. This information is then migrated to a file share, FTP site, database, Document Management or Enterprise Content Management system. These systems often provide a search function, allowing search of the assets based on the produced metadata, and then viewed using document imaging software. == General document capture system solutions == === Integration with document management system === ECM (Enterprise Content management) and their DMS component (Document Management System) are being adopted by many organizations as a corporate document management system for all types of electronic files, e.g. MS word, PDF ... However, much of the information held by organisations is on paper and this needs to be integrated within the same document repository. By converting paper documents into digital format through scanning, organizations convert paper into image formats such as TIF, JPG, and PDF, and also extract valuable index information or business data from the document using OCR technology. Digital documents and associated metadata can easily be stored in the ECM in a variety of formats. The most popular of these formats is PDF which not only provides an accurate representation of the document but also allows all the OCR text in the document to be stored behind the PDF image. This format is known as PDF with hidden text or text-searchable PDF. This allows users to search for documents by using keywords in the metadata fields or by searching the content of PDF files across the repository. ==== Advantages of scanning documents into a ECM/DMS ==== Information held on paper is usually just as valuable to organisations as the electronic documents that are generated internally. Often this information represents a large proportion of the day to day correspondence with suppliers and customers. Having the ability to manage and share this information internally through a document management system such as SharePoint or a CMIS-compatible repository improves collaboration between departments or employees and also eliminates the risk of losing this information through disasters such as floods or fire. Organisations adopting an ECM/DMS often implement electronic workflow which allows the information held on paper to be included as part of an electronic business process and incorporated into a customer record file along with other associated office documents and emails. For business critical documents, such as purchase orders and supplier invoices, digitising documents helps speed up business transactions as well as reduce manual effort involved in keying data into business systems, such as CRM, ERP and Accounting. Scanned invoices can also be routed to managers for payment approval via email or an electronic workflow. == Electronic document capture == In the earlier implementations of Document Capture Software, the technology focused solely on the digitization and capture of information from paper documents. Document images were acquired from document scanners via TWAIN/ISIS drivers. Only image-based file formats like TIF, JPG, and BMP were typically compatible with these solutions. But in recent years, as the volume of electronically-created documents and the number of proprietary file formats continues to increase at exponential rates, the need for handling documents existing in electronic formats has grown. The relevant document capture products have adapted to function with non-image file formats with the end-goal of creating a unified processing workflow capable of handling all incoming documents The ability to import files from a variety of sources is one example of such adaptation. Importing documents from ECM/DMS software solutions, email servers, FTP, and EDI is now as much of a requirement of document capture software as is paper capture. The normalization of output files to text-based PDF format is now another critical factor in long-term archival of proprietary electronic file formats. Normalization expands access and usage of files to users throughout the enterprise, rather than only those that created the original electronic file.

  Read more →
• 

  Virtual facility

  A Virtual Facility (VF) is a highly realistic digital representation of a data center, used to model all relevant aspects of a physical data center with a high degree of precision. The term "virtual" in Virtual Facility refers to its use of virtual reality, rather than the abstraction of computer resources as seen in platform virtualization. The VF mirrors the characteristics of a physical facility over time and allows for detailed analysis and modeling. == VF Model features == A standard VF model includes: Three-dimensional physical facility layout Network connectivity of facility equipment Full inventory of facility equipment, including electronics and electrical systems such as power distribution units (PDUs) and uninterruptible power supplies (UPSs) Full air conditioning system (ACUs) and controls within the room The term Virtual Facility was introduced to address the emerging environmental problems facing modern Mission Critical Facilities (MCFs). This concept combines virtual reality (VR), computer simulation, and expert systems applied to the domain of facilities. The VF type of computer simulation allows for detailed analysis and prototyping of airflow in the data center using computational fluid dynamics (CFD) techniques. This enables the visualization and numerical analysis of airflow and temperatures within the facility, helping to predict real-world outcomes. == VF applications == The VF model can be used to assist with the following: Greenfield design Asset management Troubleshooting existing data centers Making existing data centers more resilient Making existing data centers more energy efficient Cost prediction Staff training Capacity planning Load growth management Many organizations use VF models to virtually assess scenarios before committing resources to physical changes. This allows for better decision-making regarding the addition or modification of equipment, helping to avoid logistical or thermal problems.

  Read more →
• 

  Alibaba Cloud

  Alibaba Cloud, also known as Aliyun (Chinese: 阿里云; pinyin: Ālǐyún; lit. 'Ali Cloud'), is a cloud computing company, a subsidiary of Alibaba Group. Alibaba Cloud provides cloud computing services to online businesses and Alibaba's own e-commerce ecosystem. Its international operations are registered and headquartered in Singapore. Alibaba Cloud offers cloud services that are available on a pay-as-you-go basis, and include elastic compute, data storage, relational databases, big-data processing, DDoS protection and content delivery networks (CDN). It is the largest cloud computing company in China, and in Asia Pacific according to Gartner. Alibaba Cloud operates data centers in 29 regions and 87 availability zones around the globe. As of June 2017, Alibaba Cloud is placed in the Visionaries' quadrant of Gartner's Magic Quadrant for cloud infrastructure as a service, worldwide. == History == Alibaba Cloud was founded in September 2009, and R&D centers and operation centers were opened in Hangzhou, Beijing, and Silicon Valley. === 2010–2013 === In November 2010, the company supported the first Single's Day (11.11) Taobao shopping festival, with 2.4 billion PageViews (PV) in 24 hours. Two years later, in November 2012, it became the first Chinese cloud service provider to pass ISO27001:2005 (Information Security Management System). In January 2013, Alibaba Cloud merged with HiChina (founded by Xiangning Zhang) for the www.net.cn business as one of the largest acquisitions in the company's history at the time. In August of that year, ApsaraDB architecture supported 5000 physical machines in a single cluster. === 2014–2017 === The company's Hong Kong data center went online in May 2014, and in December of that year, Alibaba Cloud defended a 14-hour-long DDoS attack, peaking at 453.8 Gbit/s. In July 2015, the Alibaba Group invested US$1 billion in Alibaba Cloud. A month later, Alibaba Cloud's first Singapore data center opened, and Singapore was announced as Alibaba Cloud's overseas headquarters. Two US data centers went online in October 2015, and that same month MaxCompute took the lead in the Sort Benchmark, sorting 100 TB data in 377s compared with Apache Spark's previous record of 1406s. The Alibaba Cloud Computing Conference was also held in October 2015 in Hangzhou and attracted over 20,000 developers. A month later, in November, the company supported the 11.11 shopping festival with a record of $14.2 billion transactions in 24 hours. Alibaba Cloud partnered with SK Holdings C&C in April 2016 to provide cloud services to Korean and Chinese companies. A month later, the company formalized a joint venture with SoftBank to launch cloud services in Japan that utilize technologies and solutions from Alibaba Cloud. In June 2016, Alibaba Cloud expanded its data center operations in Singapore with the establishment of a second availability zone. Alibaba Cloud also achieved two new certifications overseas: Singapore Multi-Tier Cloud Security (MTCS) standard Level 3, and the Payment Card Industry Three-Domain Secure (PCI 3DS). The company partnered with Vodafone Germany in November 2016 for Data Center operations and to provide cloud services to German and European companies. Alibaba became the official cloud services provider of the Olympics in January 2017. A month later, in February, the company became a founding Member of the EU Cloud Code of Conduct. In June 2017, Alibaba Cloud was placed in the Visionaries quadrant of Gartner's Magic Quadrant for Cloud Infrastructure as a Service, Worldwide. Alibaba Cloud partnered with Malaysia's Fusionex in September 2017 to provide cloud solutions in Southeast Asia, and the Malaysia data center commenced operations in October. That same month, the company partnered with Elastic and launched a new service called Alibaba Cloud Elasticsearch. Alibaba Cloud India data center commenced operations in December 2017. In addition, Alibaba Cloud received the C5 standard certification from the German Federal Office for Information Security (BSI) for its data centers in Germany and Singapore. === 2018–2021 === In February 2018, Alibaba Cloud's Indonesia data center commenced operations. The company's first data center opening in the Philippines in June 2021. Alibaba Cloud unveiled the ARM-based Yitian 710 chip, designed in-house, for use in its data centers in October 2021. On November 24, 2021, the bug Log4Shell was disclosed to Apache by Chen Zhaojun of Alibaba Cloud's Security Team. On December 22, 2021, the Chinese Ministry of Industry and Information Technology suspended a partnership with Alibaba Cloud for "failure in reporting cybersecurity vulnerabilities" related to the Log4Shell bug. === 2022 === In September 2022, Alibaba Cloud announced a $1 billion pledge to upgrade its global partner ecosystem. == Data center regions == Alibaba Cloud has 25 regional data centres globally. The Data Center in Germany is operated by Vodafone Germany (Frankfurt) and certified with C5. == Products == Alibaba Cloud provides cloud computing IaaS, PaaS, DBaaS and SaaS, including services such as e-commerce, big data, Database, IoT, Object storage (OSS), Kubernetes and data customization which can be managed from Alibaba web page or using aliyun command line tool. AnalyticDB was first released in May 2018, and the latest version 3.0 was released in 2019. On April 26, 2019, TPC published TPC-DS benchmark result of AnalyticDB. In 2019, a paper about the system design of AnalyticDB was published in VLDB conference 2019. == Academic partners == List of academic alliances: Shanghai Jiao Tong University Universiti Tunku Abdul Rahman (UTAR) University of Malaya Hong Kong Shue Yan University Macao University of Science and Technology Singapore University of Social Sciences (SUSS) Télécom Paris SUPINFO International University Université de technologie sino-européenne de l'université de Shanghai Gadjah Mada University Universitas Prasetiya Mulya Bina Nusantara University Krida Wacana Christian University Hong Kong Institute of Vocational Education Nanyang Polytechnic Republic Polytechnic Sekolah Tinggi Teknologi Informasi NIIT Usman Institute of Technology AISSMS Institute of Information Technology == Controversy == On October 26, 2016, Zhang Kai, CEO of ITHome issued an announcement stating he could no longer tolerate Alibaba Cloud's overselling and service interruption issues, and had migrated the hosting entirely to Baidu Cloud. Alibaba Cloud subsequently issued an apology letter, but indirectly mentioned that website performance should consider system architecture and avoid single-point design.

  Read more →
• 

  Bibliometrician

  A bibliometrician is a researcher or a specialist in bibliometrics. It is near-synonymous with an informetrican (who studies informetrics), a scientometrican (who study scientometrics) and a webometrician, who study webometrics. == Notable bibliometricians == Christine L. Borgman Samuel C. Bradford Blaise Cronin Margaret Elizabeth Egan Eugene Garfield (developer of the Science Citation Index and the Impact factor) Jorge E. Hirsch (developer of the h-index) Alfred J. Lotka Vasily Nalimov Derek J. de Solla Price Ronald Rousseau George Kingsley Zipf

  Read more →
• 

  Information quality

  Information quality (IQ) is a contextual property of or a perspective to the content within information systems. There exist two complementary yet partially conflicting definitions of high-quality: firstly, information is considered high quality if it is fit for its intended purpose ; secondly, it is deemed high quality if it conforms to specified requirements . The primary distinction between these definitions is that Juran's perspective focuses on the suitability of information for its intended purpose, which can be measured by the success of its application even without direct access to or exact knowledge of the data. For example, a black-box AI with access to English Wikipedia can work well for users' purposes but using Estonian Wikipedia fails for the same purposes. Given that the AI remains the same, it can be concluded that English version data would be of higher quality in comparison to Estonian version, even without exact comparison of data contents and their properties in each version. In contrast, Crosby emphasizes adherence to predefined specifications, assuming specific criteria rather than measuring the success of its use; for instance, information in Wikipedia could be proven to be good based on criteria such as existing peer validation and academic references, even if the AI results are poor. This approach falls into problems when data is not completely accessible or all quality properties cannot be known and measured leading to false impression of quality due to lacking and misleading metrics. Numerous IQ frameworks and methodologies provide tangible approach to assess and measure DQ/IQ in a robust and rigorous manner. == Conceptual problems == Although the foundational definitions are usable for most everyday purposes, specialists often use more complex models for information quality. It has been suggested, however, that higher the quality the greater will be the confidence in meeting more general, less specific contexts. == Dimensions and metrics of information quality == "Information quality" is a measure of its fitness for use or conformance to requirements. In this way, "quality" is considered contextual and it can then vary across users and uses of the information. The exact degree of quality is often described with dimensions such as accuracy, timeliness, completeness, and similar scales. Although a huge amount of academic research has been directed to these dimensions, there does not exist consensus on their definitions or practical usefulness . Historically, Richard Wang and Diane Strong proposed a list of dimensions or elements used in assessing Information Quality is: Intrinsic IQ: accuracy, objectivity, believability, reputation Contextual IQ: relevance, value-added, timeliness, completeness, amount of information Representational IQ: interpretability, format, coherence, compatibility Accessibility IQ: accessibility, access security Other authors propose similar but different lists of dimensions for analysis, and emphasize measurement and reporting as information quality metrics. Larry English prefers the term "characteristics" to dimensions. However, a considerable amount of information quality research involves investigating and describing various categories of desirable attributes (or dimensions) of data. Research has recently shown the huge diversity of terms and classification structures used. === Quality metrics === Source: Authority/verifiability Authority refers to the expertise or recognized official status of a source. Consider the reputation of the author and publisher. When working with legal or government information, consider whether the source is the official provider of the information. Verifiability refers to the ability of a reader to verify the validity of the information irrespective of how authoritative the source is. To verify the facts is part of the duty of care of the journalistic deontology, as well as, where possible, to provide the sources of information so that they can be verified Scope of coverage Scope of coverage refers to the extent to which a source explores a topic. Consider time periods, geography or jurisdiction and coverage of related or narrower topics. Composition and organization Composition and organization has to do with the ability of the information source to present its particular message in a coherent, logically sequential manner. Objectivity Objectivity is the bias or opinion expressed when a writer interprets or analyze facts. Consider the use of persuasive language, the source's presentation of other viewpoints, its reason for providing the information and advertising. Integrity Adherence to moral and ethical principles; soundness of moral character The state of being whole, entire, or undiminished Comprehensiveness Of large scope; covering or involving much; inclusive: a comprehensive study. Comprehending mentally; having an extensive mental grasp. Insurance. covering or providing broad protection against loss. Validity Validity of some information has to do with the degree of obvious truthfulness which the information carries Uniqueness As much as 'uniqueness' of a given piece of information is intuitive in meaning, it also significantly implies not only the originating point of the information but also the manner in which it is presented and thus the perception which it conjures. The essence of any piece of information we process consists to a large extent of those two elements. Timeliness Timeliness refers to information that is current at the time of publication. Consider publication, creation and revision dates. Beware of Web site scripting that automatically reflects the current day's date on a page. Reproducibility (utilized primarily when referring to instructive information) Means that documented methods are capable of being used on the same data set to achieve a consistent result. == Professional associations == IQ International—the International Association for Information and Data Quality IQ International is a not-for-profit, vendor neutral, professional association formed in 2004, dedicated to building the information and data quality profession. CDOIQ Society Chief Data Officers and Information Quality Society is a global professional society supporting data leaders with networking, meetings, best practices, experience, certification, and training. == Information quality conferences == A number of major conferences relevant to information quality are held annually: Annual MIT Chief Data Officer & Information Quality (CDOIQ) Symposium Annual conferences held at the Massachusetts Institute of Technology, Cambridge, MA, USA Data Governance and Information Quality Conference Commercial conferences held each year in the USA Data Quality Asia Pacific Commercial conference held annually in Sydney or Melbourne, Australia Enterprise Data and Business Intelligence Conference Europe Commercial conferences held annually in London, England. Information and Data Quality Conference Not for profit conference run annually by IQ International (the International Association for Information and Data Quality) in the USA International Conference on Information Quality Academic Conference launched through MITIQ held annually at a University Master Data Management & Data Governance Conferences Six major conferences are run annually by the MDM Institute in venues such as London, San Francisco, Sydney, Toronto, Madrid, Frankfurt, Shanghai and New York City.

  Read more →
• 

  BRS/Search

  BRS/Search is a full-text database and information retrieval system. BRS/Search uses a fully inverted indexing system to store, locate, and retrieve unstructured data. It was the search engine that in 1977 powered Bibliographic Retrieval Services (BRS) commercial operations with 20 databases (including the first national commercial availability of MEDLINE); it has changed ownership several times during its development and is currently sold as Livelink ECM Discovery Server by Open Text Corporation. == Early development == Development on what was to become BRS began as Biomedical Communications Network (BCN) at the State University of New York at Albany (SUNY). BCN, which went online in 1968, provided on-line access to nine databases, including MEDLINE and BIOSIS Previews, to large universities and medical schools primarily in the Northeast of the USA. State funding for the project was withdrawn in 1975, and Bibliographic Retrieval Services (BRS) was formed as a non-profit concern the following year. It was incorporated in May 1976 as a for-profit corporation with Ron Quake as president, Jan Egeland as vice president in charge of marketing and training, and Lloyd Palmer as vice president of systems. == BRS commercial operations == In December 1976, the First BRS User Meeting was held in Syracuse, New York, and by January 1977 BRS started commercial operations with 20 databases (including the first national commercial availability of MEDLINE) and 9 million records, using modified IBM STAIRS (STorage And Information Retrieval System) software, Telenet for telecommunications, and timesharing mainframe computers of Carrier Corporation. In October 1980 BRS was sold by Egeland and Quake to Indian Head, Inc., a subsidiary of the Dutch company Thyssen-Bornemisza Group. == 1989–1993 == In 1989 Robert Maxwell acquired BRS and the BRS/Search software; he announced the planned incorporation of the ORBIT Search Service and BRS Information Technologies and renamed the whole group Maxwell Online, Inc. At that time BRS Information Technologies was serving the medical and academic library marketplace with over 150 databases. Maxwell later bought the publishing company Macmillan and put Maxwell Online under Macmillan. In the same year BRS/LINK (hypertext connection of databases; first application delivering full text) was announced. The initial BRS/LINK application "relates the citation in a bibliographic database to its full-text article in a second database," and "eliminates the need to re-execute a search strategy in the second database in order to find the corresponding full-text article." Initially BRS/LINK supported linking only selected bibliographic databases: MEDLINE, Health Planning and Administration, and MEDLINE References on AIDS to the full-text Comprehensive Core Medical Library. At the time of Robert Maxwell’s death in 1991, Macmillan brought in Andrew Gregory to represent the company during the 2 years that Maxwell’s affairs were being settled and to prepare Maxwell Online to be able to sell the components. Maxwell Online shortly thereafter underwent yet another name change, this time to InfoPro Technologies. == Dataware Technologies ownership of BRS/SEARCH == Early in 1994, InfoPro Technologies, a subsidiary of MHC Inc. (holding company for Macmillan Inc.), the former Maxwell Online service, sold off all its subsidiaries. ORBIT Search Services went to the French-owned Questel, the dial-up BRS Search Services to CD Plus Technologies (later to become OVID), and BRS Software Products (including BRS/SEARCH) to Dataware Technologies. Almost up to the end of InfoPro Technologies, BRS Software had been the fastest growing segment of the company. At the 14th BRS North American Users Group Conference in 1999, Dave Schubmehl of Dataware Technologies presented a paper in which he stated "The purpose of this presentation is to update BRS users on upcoming releases of BRS/Search, NetAnswer, and other Dataware products. BRS/Search 7.0 will include features specifically requested by customers, as well as other enhancements. Earlier this year, Dataware acquired Sovereign Hill Software, makers of InQuery. In light of that acquisition, and Dataware's other development projects, we'll look at Dataware's plans for all products, including BRS/Search and NetAnswer." == Open Text acquisition of BRS/Search == In 2001 BRS/Search was acquired by Open Text and became LiveLink ECM Discovery Server. It is now referred to as Open Text Discovery Server. Open Text still supports both BRS/Search and NetAnswer. The core BRS/Search technology in the Open Text portfolio was augmented with other capabilities through various acquisitions. For example, Dataware's acquisition of Sovereign-Hill brought InQuery, “a probabilistic information retrieval system using an inference network”, which was developed by the University of Massachusetts Amherst Center for Intelligent Information Retrieval] out of the UMass CIIR and into the marketplace. A product re-branding table shows the range of products, their old names and their new names. InQuery is a concept search engine that uses noun phrases, parts of speech and other co-occurrence relationships in overlapping passages of text rather than single term inverted indexes of single words in documents. Open Text's portfolio has grown to include Hummingbird Content Management, and has always included BASIS. == 2003 == BRS/Search North America User's Group (BRSNAUG) website with a June 8, 2003 date listed the following features for BRS/Search. The BRSNAUG also disincorporated in 2003. Cross-references to BRS/Search on the World Wide Web point to Open Text Livelink. Engine features include: Rapid query response time. Numerical data handling and elementary statistical processing (sum, avg, min, max) Search results weighting and relevancy ranking Left- and right-truncation and expansion of search terms Superior data compression – loaded databases typically use only about 1.5 times the input stream size in disk space Large capacity databases – up to 100 million documents, each with up to 65,000 paragraphs Fine control of indexing and searching – right down to the word, sentence, and paragraph level Fine control over data security. Document access can be controlled at the database, document, and paragraph level International language support for all 7/8 bit characters sets and customizable language tables Flexible and customizable stop word lists ANSI-compatible thesauri Hypertext links within and between documents and databases (R6.x) Support for natural language parsing of queries Automatic document summarization tools Client/Server development Programming interfaces for World-Wide Web (HTTP, HTML) access to databases

  Read more →
• 

  Digital omnivore

  A digital omnivore is a person who uses multiple modalities (devices) to access the Internet and other media content in their daily life. As people increasingly own mobile devices, cross-platform multimedia consumption has continued to shape the digital landscape, both in terms of the type of media content they consume and how they consume it. As of 2021, at least half of all global digital traffic is generated by mobile devices. == Connected devices and digital consumption == A 2015 study of digital media consumption showed that smartphones were primarily used for communication, and tablets were primarily used for entertainment – additionally, both were frequently used in conjuncture with other devices, like televisions. An earlier 2011 analysis of the way consumers in the U.S. viewed news content on their devices throughout the day demonstrated how people use different mobile devices for different functions. On a typical weekend morning, digital omnivores accessed their news using their tablet, favored their computer during the working day, and returned to tablet use in the evening, peaking between the hours of 9pm and midnight. Mobile phones were used for web-browsing throughout the day when users were away from their personal computer. Increased Wi-Fi availability and mobile broadband adoption have changed the way people are going online. In August 2011, more than a third (37.2%) of U.S. digital traffic coming from mobile phones occurred via a Wi-Fi connection while tablets, which traditionally required a Wi-Fi connection to access the Internet, are increasingly driving traffic using mobile broadband access. As of 2021, LTE, 5G, and other forms of mobile broadband access are available on the majority of mobile devices. Tablets contributed nearly 2% of all web browsing traffic in the United States in 2011. During this period, iPads also began to account for a higher share of Internet traffic than iPhones (46.8% vs. 42.6% of all iOS device traffic. == Implications for marketing, advertisers and publishers == As of 2021, the average amount of time spent daily consuming digital media was eight hours, an increase from 2020 and a further increase from 2019, partially as a result of the COVID-19 pandemic. Social media platforms such as Instagram, Facebook, Twitter, and TikTok, as well as other online platforms like YouTube, incorporate advertisements into the in-app or online experience, with some offering the ability to shop for and sell items through the app or website.

  Read more →
• 

  Xulvi-Brunet–Sokolov algorithm

  Xulvi-Brunet and Sokolov's algorithm generates networks with chosen degree correlations. This method is based on link rewiring, in which the desired degree is governed by parameter ρ. By varying this single parameter it is possible to generate networks from random (when ρ = 0) to perfectly assortative or disassortative (when ρ = 1). This algorithm allows to keep network's degree distribution unchanged when changing the value of ρ. == Assortative model == In assortative networks, well-connected nodes are likely to be connected to other highly connected nodes. Social networks are examples of assortative networks. This means that an assortative network has the property that almost all nodes with the same degree are linked only between themselves. The Xulvi-Brunet–Sokolov algorithm for this type of networks is the following. In a given network, two links connecting four different nodes are chosen randomly. These nodes are ordered by their degrees. Then, with probability ρ, the links are randomly rewired in such a way that one link connects the two nodes with the smaller degrees and the other connects the two nodes with the larger degrees. If one or both of these links already existed in the network, the step is discarded and is repeated again. Thus, there will be no self-connected nodes or multiple links connecting the same two nodes. Different degrees of assortativity of a network can be achieved by changing the parameter ρ. Assortative networks are characterized by highly connected groups of nodes with similar degree. As assortativity grows, the average path length and clustering coefficient increase. == Disassortative model == In disassortative networks, highly connected nodes tend to connect to less-well-connected nodes with larger probability than in uncorrelated networks. Examples of such networks include biological networks. The Xulvi-Brunet and Sokolov's algorithm for this type of networks is similar to the one for assortative networks with one minor change. As before, two links of four nodes are randomly chosen and the nodes are ordered with respect to their degrees. However, in this case, the links are rewired (with probability p) such that one link connects the highest connected node with the node with the lowest degree and the other link connects the two remaining nodes randomly with probability 1 − ρ. Similarly, if the new links already existed, the previous step is repeated. This algorithm does not change the degree of nodes and thus the degree distribution of the network.

  Read more →
• 

  Iteration

  Iteration means repeating a process to generate a (possibly unbounded) sequence of outcomes. Each repetition of the process is a single iteration, and the outcome of each iteration is the starting point of the next iteration. In mathematics and computer science, iteration (along with the related technique of recursion) is a standard element of algorithms. == Mathematics == In mathematics, iteration may refer to the process of iterating a function, i.e. applying a function repeatedly, using the output from one iteration as the input to the next. Iteration of apparently simple functions can produce complex behaviors and difficult problems – for examples, see the Collatz conjecture and juggler sequences. Another use of iteration in mathematics is in iterative methods which are used to produce approximate numerical solutions to certain mathematical problems. Newton's method is an example of an iterative method. Manual calculation of a number's square root is a common use and a well-known example. == Computing == In computing, iteration is a technique that marks out of a block of statements within a computer program for a defined number of repetitions. That block of statements is said to be iterated. A computer programmer might also refer to that block of statements as an iteration. === Implementations === Loops constitute the most common language constructs for performing iterations. The following pseudocode "iterates" three times the line of code between begin & end through a for loop, and uses the values of i as increments. It is permissible, and often necessary, to use values from other parts of the program outside the bracketed block of statements, to perform the desired function. Iterators constitute alternative language constructs to loops, which ensure consistent iterations over specific data structures. They can eventually save time and effort in later coding attempts. In particular, an iterator allows one to repeat the same kind of operation at each node of such a data structure, often in some pre-defined order. Iteratees are purely functional language constructs, which accept or reject data during the iterations. === Relation with recursion === Recursions and iterations have different algorithmic definitions, even though they can generate identical results. The primary difference is that recursion can be a solution without prior knowledge as to how many times the action must repeat, while a successful iteration requires that foreknowledge. Some types of programming languages, known as functional programming languages, are designed such that they do not set up a block of statements for explicit repetition, as with the for loop. Instead, those programming languages exclusively use recursion. Rather than call out a block of code to repeate a pre-defined number of times, the executing code block instead "divides" the work into a number of separate pieces, after which the code block executes itself on each individual piece. Each piece of work is divided repeatedly until the "amount" of work is as small as possible, at which point the algorithm does that work very quickly. The algorithm then "reverses" and reassembles the pieces into a complete whole. The classic example of recursion is in list-sorting algorithms, such as merge sort. The merge sort recursive algorithm first repeatedly divides the list into consecutive pairs. Each pair is then ordered, then each consecutive pair of pairs, and so forth until the elements of the list are in the desired order. The code below is an example of a recursive algorithm in the Scheme programming language that outputs the same result as the pseudocode under the previous heading. == Education == In some schools of pedagogy, iterations are used to describe the process of teaching or guiding students to repeat experiments, assessments, or projects, until more accurate results are found, or the student has mastered the technical skill. This idea is found in the old adage, "Practice makes perfect." In particular, "iterative" is defined as the "process of learning and development that involves cyclical inquiry, enabling multiple opportunities for people to revisit ideas and critically reflect on their implication." Unlike computing and math, educational iterations are not predetermined; instead, the task is repeated until success according to some external criteria (often a test) is achieved.

  Read more →